Home / Products & Standards / ASME B 18.6.

5M - 2000 (R2010) Metric Type IA Cross-Recessed Flat Countersunk

Head Tapping Screws [Table 10]

EN

ASME B 18.6.5M - 2000 (R2010) Metric Type IA Cross-Recessed Flat Countersunk Head Tapping Screws [Table 10]

3D DRAWING

3D DRAWING

Tolerance Calculator

Error Correction
Unit: mm

Screw Thread
ST2.2 ST2.9 ST3.5 ST4.2 ST4.8 ST5.5 ST6.3 ST8 ST9.5
d

P Pitch 0.8 1 1.3 1.4 1.6 1.8 1.8 2.1 2.1

max - - - - - - - - -
ds
min - - - - - - - - -

max 3.8 5.5 7.3 8.4 9.3 10.3 11.3 15.8 18.3
dk
min 3.5 5.2 6.9 8 8.9 9.9 10.9 15.4 17.8

k max 1.1 1.7 2.3 2.6 2.8 3 3.1 4.6 5.2

max - - - - - - - - -
L1
min - - - - - - - - -

max 0.8 1.2 1.4 1.6 2 2.2 2.4 3.2 4

r
min 0.4 0.6 0.7 0.8 1 1.1 1.2 1.6 2

M Ref. 2.2 3.08 4.14 4.44 4.98 6.4 6.66 8.82 9.84

t Ref. 1.56 2.08 2.38 2.68 3.24 3.54 3.78 5.06 6.12

b min 13 17 21 25 29 33 38 38 38

Socket No. 0 1 2 2 2 3 3 4 4

Type of Thread and Point AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT AB,B,BF,BT

Screw Thread
M2 M2.5 M3 M3.5 M4 M5 M6 M8 M10
d

P Pitch 0.4 0.45 0.5 0.6 0.7 0.8 1 1.25 1.5

max 2 2.5 3 3.5 4 5 6 8 10

ds
min 1.86 2.36 2.86 3.32 3.82 4.82 5.82 7.78 9.78

max 3.8 4.7 5.5 7.3 8.4 9.3 11.3 15.8 18.3
dk
min 3.5 4.4 5.2 6.9 8 8.9 10.9 15.4 17.8

k max 1.2 1.5 1.7 2.3 2.7 2.7 3.3 4.6 5

max 0.5 0.55 0.6 0.7 0.8 0.9 1.1 1.4 1.7
L1
min 0.3 0.35 0.4 0.5 0.6 0.7 0.9 1.1 1.3

max 0.8 1 1.2 1.4 1.6 2 2.4 3.2 4

r
min 0.4 0.5 0.6 0.7 0.8 1 1.2 1.6 2

M Ref. 2.2 2.78 3.08 4.14 4.44 4.98 6.66 8.82 9.84

t Ref. 1.56 1.83 2.08 2.38 2.68 3.24 3.78 5.06 6.12

b min 12 15 18 21 24 30 38 38 38

Socket No. 0 1 1 2 2 2 3 4 4

Type of Thread and Point D,F,T D,F,T D,F,T D,F,T D,F,T D,F,T D,F,T D,F,T D,F,T

,Recessed head Types D, F, and T tapping screws shall have Style B head form. Recessed head Types AB, B, BF, and BT tapping screws shall have Style A head form. The
underhead shoulder is mandatory on Style B head form, and all other head dimensions shall be common for both the Style A and Style B head forms.
,The comparable ISO standard is ISO 7050.

Similar Standards

[GB] Cross Recessed Countersunk Head Tapping Screws

1
GB /T 846 - 2017 Suppliers(3)

[GB] Cross Recessed Countersunk Head Tapping Screws

2
GB /T 846 - 1985 Suppliers(3)

[GB] Cross recessed countersunk head self-tapping screws

3
GB 846 - 1976 Suppliers(3)

[DIN] Cross recessed countersunk head tapping screws

4
DIN 7982 - 1990 Suppliers(1)

[ISO] Cross Recessed Countersunk (Flat) Head Tapping Screws

5
ISO 7050 - 2011 Suppliers(1)

[ISO] Cross recessed countersunk head tapping screws

6
ISO 7050 - 1983 Suppliers(1)

[JIS]
7
JIS B 1122 - 1996 Cross Recessed Countersunk Head Tapping Screws

[JIS]
8
JIS B 1125 - 2015 Cross Recessed Trumpet Head Self Drilling Tapping Screw

[JIS]
9
JIS B 1125 - 2015 Flex. Purpose Drilling Tapping Screws

[JIS]
10
JIS B 1125 - 2003 cross recessed trumpet head self drilling tapping screw

[JIS]
11
JIS B 1125 - 2003 Cross recessed ribbed countersunk head tapping screws

[JIS]
12
JIS B 1122 (F) - 1996 Cross recessed countersunk head tapping screws

[JIS]
13
JIS B 1115 (F) - 1995 Countersunk head tapping screws

[JIS]
14
JIS B 1125 - 1995 Cross recessed bugle head self-drilling tapping screws

[ANSI/ASME]
15
ANSI/ASME B 18.6.3 - 2010 80° Machine Screw and Tapping Screw Nuts (Inch Seires)

[UNI] Two-thread countersunk (flat) head tapping screws with cross

16
UNI 9709 - 1990 rocessed for plastics

[UNI]
17
UNI 6955 Cross-Recessed Flat Countersunk Head Tapping Screws

[NF]
18
NF E 25-656 - 1994 Cross Recessed Countersunk (Flat) Head Tapping Screws

[BS]
19
BS 4174 - 1972 Recess 80°countersunk Head Screws - Type Z [Table 9]

[BS] Recess 80°Truncated Countersunk Head Screws - Type Z [Table

20
BS 4174 - 1972 11]

[AS]
21
AS /NZS 4407 - 1996 ISO metric cross recessed countersunk head tapping screws

[KS]
22
KS B 1032 - 2001 Cross-Recessed Countersunk (Flat) Head Tapping Screws

[YJT]
23
YJT 4058 (WN1413C) Cross recessed countersunk head Tapping screws [PT-K Thread]

[DIN EN ISO] Cross Recessed Countersunk (Flat) Head Tapping Screws

24
DIN EN ISO 7050 - 2011 Suppliers(1)

[ASME]
25 ASME B 18.6.5M - 2000 Metric cross recessed countersunk head tapping screws [Table 9]
(R2010)

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

26
ASME B 18.6.4 - 1998 Type A Thread Forming [Table 10]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

27
ASME B 18.6.4 - 1998 Type B and BP Thread Forming [Table 10]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

28
ASME B 18.6.4 - 1998 Type C Thread Forming [Table 10]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

29
ASME B 18.6.4 - 1998 Type AB Thread Forming [Table 10]

[ASME] Type IA Cross Recessed Flat Countersunk Head Tapping Screws -

30
ASME B 18.6.4 - 1998 Type A Thread Forming [Table 11]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

31
ASME B 18.6.4 - 1998 Type B and BP Thread Forming [Table 11]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

32
ASME B 18.6.4 - 1998 Type C Thread Forming [Table 11]

[ASME] Type I Cross Recessed Flat Countersunk Head Tapping Screws -

33
ASME B 18.6.4 - 1998 Type AB Thread Forming [Table 11]

[ASME] Type II Cross Recessed Flat Countersunk Head Tapping Screws -

34
ASME B 18.6.4 - 1998 Type A Thread Forming [Table 12]

[ASME] Type II Cross Recessed Flat Countersunk Head Tapping Screws -

35
ASME B 18.6.4 - 1998 Type B and BP Thread Forming [Table 12]

[ASME] Type II Cross Recessed Flat Countersunk Head Tapping Screws -

36
ASME B 18.6.4 - 1998 Type C Thread Forming [Table 12]

[ASME] Type II Cross Recessed Flat Countersunk Head Tapping Screws -

37
ASME B 18.6.4 - 1998 Type AB Thread Forming [Table 12]

[ASME] Type I Cross Recessed Undercut Flat Countersunk Head Tapping

38
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table 14]

[ASME] Type I Cross Recessed Undercut Flat Countersunk Head Tapping

39
ASME B 18.6.4 - 1998 Screws - Type C Thread Forming [Table 14]

[ASME] Type I Cross Recessed Undercut Flat Countersunk Head Tapping

40
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table 14]

[ASME] Type IA Cross Recessed Undercut Flat Countersunk Head

41
ASME B 18.6.4 - 1998 Tapping Screws - Type B and BP Thread Forming [Table 15]

[ASME] Type IA Cross Recessed Undercut Flat Countersunk Head

42
ASME B 18.6.4 - 1998 Tapping Screws - Type C Thread Forming [Table 15]

[ASME] Type IA Cross Recessed Undercut Flat Countersunk Head

43
ASME B 18.6.4 - 1998 Tapping Screws - Type AB Thread Forming [Table 15]

[ASME] Type II Cross Recessed Undercut Flat Countersunk Head Tapping

44
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table 16]

[ASME] Type II Cross Recessed Undercut Flat Countersunk Head Tapping

45
ASME B 18.6.4 - 1998 Screws - Type C Thread Forming [Table 16]

[ASME] Type II Cross Recessed Undercut Flat Countersunk Head Tapping

46
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table 16]

[ASME] Type I Cross Recessed Flat Countersunk Trim Head Tapping

47
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table 17]

[ASME] Type I Cross Recessed Flat Countersunk Trim Head Tapping

48
ASME B 18.6.4 - 1998 Screws - Type C Thread Forming [Table 17]

[ASME] Type I Cross Recessed Flat Countersunk Trim Head Tapping

49
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table 17]

[ASME] Type I Cross Recessed Flat Countersunk Trim Head Tapping

50
ASME B 18.6.4 - 1998 Screws - Type A Thread Forming [Table 17]

[ASME] Type IA Cross Recessed Flat Countersunk Trim Head Tapping

51
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table 18]

[ASME] Type IA Cross Recessed Flat Countersunk Trim Head Tapping

52
ASME B 18.6.4 - 1998 Screws - Type C Thread Forming [Table 18]

[ASME] Type IA Cross Recessed Flat Countersunk Trim Head Tapping

53
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table 18]

[ASME] Type IA Cross Recessed Flat Countersunk Trim Head Tapping

54
ASME B 18.6.4 - 1998 Screws - Type A Thread Forming [Table 18]

[ASME] Type II Cross Recessed Flat Countersunk Trim Head Tapping

55
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table 19]

[ASME] Type II Cross Recessed Flat Countersunk Trim Head Tapping

56
ASME B 18.6.4 - 1998 Screws - Type C Thread Forming [Table 19]

[ASME] Type II Cross Recessed Flat Countersunk Trim Head Tapping

57
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table 19]

[ASME] Type II Cross Recessed Flat Countersunk Trim Head Tapping

58
ASME B 18.6.4 - 1998 Screws - Type A Thread Forming [Table 19]

[ASME] Type I Cross Recessed 100°Flat Countersunk Head Tapping

59
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table VI2]

[ASME] Type I Cross Recessed 100°Flat Countersunk Head Tapping

60
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table VI2]

[ASME] Type IA Cross Recessed 100°Flat Countersunk Head Tapping

61
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table VI3]

[ASME] Type IA Cross Recessed 100°Flat Countersunk Head Tapping

62
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table VI3]

[ASME] Type II Cross Recessed 100°Flat Countersunk Head Tapping

63
ASME B 18.6.4 - 1998 Screws - Type B and BP Thread Forming [Table VI4]

[ASME] Type II Cross Recessed 100°Flat Countersunk Head Tapping

64
ASME B 18.6.4 - 1998 Screws - Type AB Thread Forming [Table VI4]

Message Error Correction

About Us | Pricing | Terms of Use | FAQ | Contact Us © Copyright 2009-2023 GlobalFastener.com All Right Reserved.