SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Identification of the Bel-Ray Si-7 Synthetic 2T Engine Oil
substance/preparation
Product code 99440
MSDS Number 6421
Version No. 1,0
Revision Date 09-February-2011
Manufacturer
Bel-Ray Company, Inc.
P.O. Box 526
Farmingdale, NJ 07727
United States of America
+1 732 938 2421
CHEMTREC: 800-424-9300 (USA)
CHEMTREC: +1 703-527-3887 (outside USA - call collect)
Bel-Ray Europe S.A.
Avenue Louise, 304
Bruxelles-Brussel, B-1050
Belgium
+32 (0) 2 540 84 52
Europe: +32 (0) 2 201 18 87
Europe Emergency: 112
2. HAZARDS IDENTIFICATION
This preparation is not classified as dangerous according to Directive 1999/45/EC and its amendments
Classification R43
Physical hazards Not classified as a physical hazard.
Health hazards May cause sensitization by skin contact. Prolonged exposure may cause chronic effects.
Environmental hazards Not classified as an environmental hazard.
Specific hazards No hazards resulting from the material as supplied.
Main symptoms Irritation of nose and throat. Irritation of eyes and mucous membranes.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Components CAS-No. % EC-No. / REACH Notes
Classification Registration No.
Synthetic Base Oils 64742-54-7 70 - 60 265-157-1 #
Distillates (petroleum), hydrotreated light 64742-47-8 20 - 30 265-149-8 #
Xn;R65
DODECYL PHENOL (BRANCHED) 121158-58-5 0,1 - 1 310-154-3
Xi;R38, N;R50/53
#: This substance has workplace exposure limit(s).
PBT: persistent, bioaccumulative and toxic substance.
vPvB: very persistent and very bioaccumulative substance.
The full text for all R-phrases is displayed in Section 16.
4. FIRST-AID MEASURES
Inhalation Move to fresh air. Get medical attention, if needed.
Skin contact Rinse skin with water/shower. Get medical attention if irritation develops and persists.
Eye contact Rinse with water. Get medical attention if irritation develops and persists.
Ingestion Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content
doesn't get into the lungs. Do not use mouth-to-mouth method if victim ingested the substance. IF
SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Never give liquid to an
unconscious person.
Material name: Bel-Ray Si-7 Synthetic 2T Engine Oil SDS EU
99440 Version No.: 1,0 Revision Date: 09-February-2011 Print Date: 09-February-2011 1/5
General advice Call a physician if symptoms develop or persist.
5. FIRE-FIGHTING MEASURES
Fire fighting In the event of fire, cool tanks with water spray. Use water spray to cool unopened containers.
equipment/instructions
Suitable extinguishing media Water. Water spray. Foam. Dry powder. Carbon dioxide (CO2).
Specific methods Cool containers exposed to flames with water until well after the fire is out.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions In case of spills, beware of slippery floors and surfaces.
Environmental precautions Prevent further leakage or spillage if safe to do so.
Containment procedures Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Use
water spray to reduce vapours or divert vapour cloud drift.
Methods for cleaning up Large Spills: Dike far ahead of spill for later disposal.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to
remove residual contamination. Following product recovery, flush area with water.
Never return spills in original containers for re-use.
7. HANDLING AND STORAGE
Handling Do not use in areas without adequate ventilation. Avoid prolonged exposure. Wash thoroughly
after handling.
Storage Room temperature - normal conditions. Keep out of the reach of children.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure limit values
Belgium
Components Type Value Form
Distillates (petroleum), hydrotreated light (64742-47-8) TWA 200 mg/m3 Vapor.
Synthetic Base Oils (64742-54-7) STEL 10 mg/m3 Mist.
TWA 5 mg/m3 Mist.
Denmark
Components Type Value Form
Synthetic Base Oils (64742-54-7) TLV 1 mg/m3 Mist.
Netherlands
Components Type Value Form
Synthetic Base Oils (64742-54-7) TWA 5 mg/m3 Mist.
Spain
Components Type Value Form
Synthetic Base Oils (64742-54-7) STEL 10 mg/m3 Mist.
TWA 5 mg/m3 Mist.
Sweden
Components Type Value Form
Distillates (petroleum), hydrotreated light (64742-47-8) STEL 500 mg/m3
TWA 350 mg/m3
Synthetic Base Oils (64742-54-7) STEL 3 mg/m3 Mist.
TWA 1 mg/m3 Mist.
Exposure controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or
other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Occupational exposure controls
Respiratory protection When workers are facing concentrations above the exposure limit they must use appropriate
certified respirators.
Hand protection Not normally needed.
Eye protection Not normally needed.
Skin and body protection No special protective equipment required.
General Applicable for industrial settings only: Use personal protective equipment as required. Keep
working clothes separately.
Material name: Bel-Ray Si-7 Synthetic 2T Engine Oil SDS EU
99440 Version No.: 1,0 Revision Date: 09-February-2011 Print Date: 09-February-2011 2/5
Hygiene measures Handle in accordance with good industrial hygiene and safety practices.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Oily.
Physical state Liquid
Form Liquid.
Colour Blue.
Odour Characteristic.
Odour threshold Not available.
pH Not available.
Boiling point 200 °C (392 °F)
Flash point 90 °C (194 °F) Pensky-Martens Closed Cup
Flammability limits in air, 5 estimated
upper, % by volume
Flammability limits in air, 0,6 estimated
lower, % by volume
Vapour pressure 0,03 hPa estimated
Density 866 kg/m3
Relative density Not available.
Solubility (water) Negligible
Solubility (other) Oil
Solvents
Partition coefficient Not available.
(n-octanol/water)
Viscosity 43,62 cSt @ 40 °C (104 °F)
Vapour density Not available.
Evaporation rate Not available.
Melting point/Freezing point Not available.
Auto-ignition temperature 251 °C (483,8 °F) estimated
VOC 26 %
Percent volatile 26 %
10. STABILITY AND REACTIVITY
Hazardous decomposition Irritants. At thermal decomposition temperatures, carbon monoxide and carbon dioxide.
products
Stability Material is stable under normal conditions.
Materials to avoid Strong oxidising agents.
11. TOXICOLOGICAL INFORMATION
Toxicological data
Product Test results
Bel-Ray Si-7 Synthetic 2T Engine Oil (Mixture) Acute Dermal LD50 Rabbit: 18954 mg/kg estimated
Acute Inhalation LC50 Rat: 55738 mg/m│ estimated
Acute Inhalation LC50 Rat: 309 mg/l estimated
Acute Oral LD50 Rat: 55335 mg/kg estimated
* Estimates for product may be based on additional component data not shown.
Routes of exposure Inhalation. Not applicable.
Chronic toxicity Prolonged inhalation may be harmful.
Carcinogenicity Not classifiable as to carcinogenicity to humans.
Mutagenicity No data available to indicate product or any components present at greater than 0.1% are
mutagenic or genotoxic.
Reproductivity Contains no ingredient listed as toxic to reproduction
Epidemiology No epidemiological data is available for this product.
Local effects Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea. Contact with eyes
may cause irritation. May cause skin irritation.
Material name: Bel-Ray Si-7 Synthetic 2T Engine Oil SDS EU
99440 Version No.: 1,0 Revision Date: 09-February-2011 Print Date: 09-February-2011 3/5
12. ECOLOGICAL INFORMATION
Ecotoxicity Contains a substance which causes risk of hazardous effects to the environment.
Environmental Effects An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
13. DISPOSAL CONSIDERATIONS
Disposal instructions Dispose in accordance with all applicable regulations.
Waste from residues / Dispose of in accordance with local regulations.
unused products
Contaminated packaging Offer rinsed packaging material to local recycling facilities.
14. TRANSPORT INFORMATION
ADR
Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
IMDG
Not regulated as dangerous goods.
15. REGULATORY INFORMATION
Labeling
Contains 1.3,4-THIADIAZOLE, 2,5-BIS(OCTYLDITHIO)-, DIOCTYL DISULFIDE, Distillates (petroleum),
hydrotreated light, Synthetic Base Oils
Symbol(s)
Irritant
R-phrase(s) R43 May cause sensitization by skin contact.
S-phrase(s) S1/2 Keep locked up and out of the reach of children.
S24 Avoid contact with skin.
S36/37 Wear suitable protective clothing and gloves.
Other regulations The product does not need to be labelled in accordance with EC directives or respective nationa
laws. This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006.
Water hazard class
VwVwS WGK1
16. OTHER INFORMATION
Wording of the R-phrases in R38 Irritating to skin.
sections 2 and 3 R43 May cause sensitization by skin contact.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic
environment.
R62 Possible risk of impaired fertility.
R65 Harmful: may cause lung damage if swallowed.
Inventory status
Country(s) or region Inventory name On inventory (yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) Yes
Canada Non-Domestic Substances List (NDSL) Yes
China Inventory of Existing Chemical Substances in China (IECSC) Yes
Europe European Inventory of Existing Commercial Chemical Substances Yes
(EINECS)
New Zealand New Zealand Inventory Yes
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)
Material name: Bel-Ray Si-7 Synthetic 2T Engine Oil SDS EU
99440 Version No.: 1,0 Revision Date: 09-February-2011 Print Date: 09-February-2011 4/5
Disclaimer Bel-Ray Company cannot anticipate all conditions under which this information and its product, or
the products of other manufacturers in combination with its product, may be used. It is the user’s
responsibility to ensure safe conditions for handling, storage and disposal of the product, and to
assume liability for loss, injury, damage or expense due to improper use. The information provided
in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date
of its publication. The information given is designed only as a guidance for safe handling, use,
processing, storage, transportation, disposal and release and is not to be considered a warranty or
quality specification. The information relates only to the specific material designated and may not
be valid for such material used in combination with any other materials or in any process, unless
specified in the text.
Issue date 09-February-2011
This data sheet contains Product and Company Identification: Product and Company Identification
changes from the previous Composition / Information on Ingredients: Ingredients
version in section(s): FIRST-AID MEASURES: Ingestion
Material name: Bel-Ray Si-7 Synthetic 2T Engine Oil SDS EU
99440 Version No.: 1,0 Revision Date: 09-February-2011 Print Date: 09-February-2011 5/5
