Scribd
Upload
107 views2 pages

6ED10551NB100BA2 Datasheet en

This document provides specifications for a LOGO! DM16 24R expansion module, including details on its installation, supply voltage, digital inputs, digital outputs, EMC standards, ambient conditions, and dimensions. It has 8 digital inputs and 8 digital outputs that can be used to interface with sensors and actuators. The module mounts on a DIN rail and operates on a 24V DC power supply.

Uploaded by

Eric Fabián Sánchez Umaña
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views2 pages

6ED10551NB100BA2 Datasheet en

This document provides specifications for a LOGO! DM16 24R expansion module, including details on its installation, supply voltage, digital inputs, digital outputs, EMC standards, ambient conditions, and dimensions. It has 8 digital inputs and 8 digital outputs that can be used to interface with sensors and actuators. The module mounts on a DIN rail and operates on a 24V DC power supply.

Uploaded by

Eric Fabián Sánchez Umaña
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data sheet 6ED1055-1NB10-0BA2

LOGO! DM16 24R expansion module, PS/I/O: 24 V DC/24 V DC/relay, 8


DI/8 DO, 4 MW for LOGO! 8

Installation type/mounting
Mounting on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)
● 24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Rated value (AC)
● 24 V AC No
Digital inputs
Number of digital inputs 8
Input voltage
● Type of input voltage DC
● for signal "0" < 5 V DC
● for signal "1" > 12 V DC
Input current
● for signal "0", max. (permissible quiescent current) 0.85 mA
● for signal "1", typ. 2 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. 1.5 ms
— at "1" to "0", max. 1.5 ms
Digital outputs
Number of digital outputs 8; Relays
Short-circuit protection No
Controlling a digital input Yes
Switching capacity of the outputs
● on lamp load, max. 1 000 W
Output current
● for signal "1" rated value 5A
● for signal "1" minimum load current 100 mA
Parallel switching of two outputs
● for uprating No
Switching frequency
● with resistive load, max. 2 Hz
● with inductive load, max. 0.5 Hz
● mechanical, max. 10 Hz
Relay outputs
Switching capacity of contacts
— with inductive load, max. 3A
— with resistive load, max. 5A

6ED10551NB100BA2 Subject to change without notice


1/13/2023
Page 1/2 © Copyright Siemens
EMC
Emission of radio interference acc. to EN 55 011
● Limit class B, for use in residential areas Yes
Degree and class of protection
IP degree of protection IP20
Standards, approvals, certificates
CE mark Yes
CSA approval Yes
UL approval Yes
FM approval Yes
developed in accordance with IEC 61131 Yes
according to VDE 0631 Yes
Marine approval Yes
Ambient conditions
Ambient temperature during operation
● min. 0 °C; ES03 and higher: -20 °C
● max. 55 °C
Dimensions
Width 71.5 mm
Height 90 mm
Depth 58 mm

last modified: 3/12/2021

6ED10551NB100BA2 Subject to change without notice


1/13/2023
Page 2/2 © Copyright Siemens

You might also like