TI-S60-03

ST Issue 6

Cert. No. LRQ 0963008 Fig 33

ISO 9001
Cast Iron
Strainer
Description Sizes and pipe connections
The Fig 33 is a cast iron integrally flanged Y- type strainer. The DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100,
standard stainless steel screen in the DN15 to DN80 size range DN125, DN150 and DN200
has 0.8 mm perforations, in the DN100 to DN200 size range it has Standard available flanges: EN 1092 PN16, AS 2129 table F,
1.6 mm perforations. Optional mesh sizes are available as well ANSI 150 (DN15 and DN20) and ANSI 125 (DN25 to DN200).
as monel screens. The strainer cap can be drilled and tapped for
blowdown and drain valves if required.
Standards
This product fully complies with the requirements of the
European Pressure Equipment Directive 97/23/EC.
Certification
This product is available with a manufacturer’s Typical Test Report.
Note: All certification/inspection requirements must be stated at
the time of order placement.

Optional extras
1.6 mm (DN15 to DN80)
Perforations
Stainless steel screen 3.0 mm (DN15 to DN200)
Mesh 40, 100, 200
0.8 mm (DN15 to DN80) 1
Perforations 1.6 mm (DN100 to DN200) 4
Monel screen
3.0 mm (DN15 to DN200)
Mesh 100
3
Blowdown or drain valve connections 2
The cap can be drilled to the following sizes to enable a blowdown
or drain valve to be fitted. DN15 to DN50
Strainer size Blowdown valve Drain valve
DN15 ¼ ¼"
DN20 and DN25 ½" ½"
DN32 and DN40 1" ¾"
DN50, DN65, DN80, DN100 and DN125 1¼" ¾"
DN150 and DN200 2" ¾"

Pressure / temperature limits

A
300
Temperature °C

C
200 B
1
100 Steam
saturation A
curve 4
C B
0
0 2 4 6 8 10 12 14 16
Pressure bar g
3
The product must not be used in this region. 5
A-A Flanged EN 1092 PN16
B-B Flanged AS 2129 Table F 2
C-C Flanged ANSI 125 (including DN15, DN20 flanged ANSI 150) DN65 to DN200
Body design conditions PN16
PMA Maximum allowable pressure 16 bar g
TMA Maximum allowable temperature 300°C Materials
DN15 to DN50 -10°C No. Part Material
Minimum allowable temperature
DN65 to DN200 0°C 1 Body Cast iron DIN 1691 GG 20
EN 1092 PN16 13 bar g Cap DN15 to DN50 SG iron DIN 1693 GGG 40
Maximum operating pressure AS 2129 Table F 13 bar g 2
PMO for saturated steam service Cover DN65 to DN200 Cast iron DIN 1691 GG 20
ANSI 125 10 bar g
3 Cap gasket Reinforced exfoliated graphite
ANSI 150 10 bar g
TMO Maximum operating temperature 300°C 4 Strainer screen Austenitic stainless steel ASTM A240 316L
Minimum operating temperature 0°C Cap studs Carbon steel BS 4439 Gr. 8.8
5
Designed for a maximum cold hydraulic test pressure of 24 bar g Cap nuts Carbon steel BS 3692 Gr. 8

Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2009
Kv values For conversion: Cv (UK) = Kv x 0.963 Cv (US) = Kv x 1.156
Size DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200
Perforations 0.8, 1.6 and 3.0 mm 5 8 13 22 29 46 72 103 155 237 340 588
Mesh 40 and 100 5 8 13 22 29 46 72 103 155 237 340 588
Mesh 200 4 6 10 17 23 37 58 83 124 186 268 464

Dimensions / weights (approximate) in mm and kg Spare parts

PN16 AS 2129 ANSI* Screening The spare parts available are shown in solid outline. Parts drawn
Size A A A B C area cm² Weight in broken line are not supplied as spares.
DN15 130 130 130 70 110 27 1.8 Available spares
DN20 150 147 150 80 130 43 2.7 Strainer screen 4
DN25 160 157 154 95 150 73 3.4 (state material, size of perforation or mesh and size of strainer)
DN32 180 176 176 135 225 135 6.0 Cap gasket (packet of 3) 3
DN40 200 194 194 145 240 164 7.2
DN50 230 224 224 175 300 251 10.9 How to order spares
Always order spares by using the description given in the column
DN65 290 288 228 200 335 327 21.7 headed 'Available spares' and state the size and type of strainer and
DN80 310 304 304 210 340 361 25.9 perforations or mesh required.
DN100 350 350 350 255 415 545 38.5 Example: 1 - Strainer screen, stainless steel with 0.8 mm perforations
DN125 400 400 400 300 510 843 63.0 for a DN65 Spirax Sarco Fig 33 strainer.
DN150 480 480 480 345 575 1117 87.0
DN200 600 598 598 435 730 1909 153.0
* DN15 and DN20 ANSI 150 and, DN25 to DN200 ANSI 125

DN15 to DN50
4
3

2
B
C

Withdrawal
distance

Safety information, installation and maintenance

For full details see the Installation and Maintenance Instructions
(IM-S60-18) supplied with the product.
DN65 to DN200
Installation note:
The strainer should be installed in the direction of flow, as indicated 3
on the body. On applications involving steam or gases the pocket
should be in the horizontal plane. On liquid systems the pocket 4
should point downwards. Suitable isolation valves must be installed
to allow for safe maintenance and trap replacement.
5
Maintenance note:
Maintenance can be completed with the strainer in the pipeline.
5
Disposal
The product is recyclable. No ecological hazard is anticipated with
disposal of this product providing due care is taken. Recommended tightening torques

How to order or
Example: 1 off DN25 Spirax Sarco Fig 33 strainer having EN 1092 Item Qty Size Nm
PN16 flanged connections. The strainer must be be supplied with a mm
stainless steel screen having 0.8 mm perforations. 1 DN15 36 M28 50 - 55
1 DN20 38 M32 60 - 66
1 DN25 50 M42 100 - 110
2 1 DN32 46 M56 150 - 165
1 DN40 50 M60 170 - 185
1 DN50 60 M72 190 - 210
8 DN65 19 M12 x 40 20 - 24
8 DN80 19 M12 x 40 30 - 35
8 DN100 24 M16 x 50 70 - 77
5 8 DN125 24 M16 x 50 80 - 88
8 DN150 30 M20 x 60 100 - 110
12 DN200 30 M20 x 70 90 - 100

Fig 33 Cast Iron Strainer TI-S60-03 ST Issue 6