AD629 Technical Specificatons Page 0

Technical Specifications

AD629
Diagnostic Audiometer

D-0106991-C – 2016/11
AD629 Technical Specificatons Page 1

License Overview
International configuration
AD629

Basic license Extended license

Licenses Audiometry

Basic Audiometry x x
Békésy x x
SISI x x

Langenbeck x x

Stenger x x
Modified Hughson-Westlake x x

Weber x x
ABLB x x

Speech testing with CD/Mic x x

Build-in wave files x x

Binaural Speech x

Hearing Loss Simulator (HLS) x

MHA x

QuickSIN optional optional

TEN test optional optional

High Frequency (HF) optional optional

Freefield Lineout x x

Hyrbid mode - PC controlled mode optional optional

Sync mode - Audiogram transfer optional optional

Fuctions available only in Diagnostics suite

MaskingHelper x x
AD629 Technical Specificatons Page 2

Languages supported in IMP and AUD

Portuguese
Norwegian
Japanese
Chinese

Russian

Spanish
German
English

Turkish
Finnish

Korean
French

Polish
Czech

Italian
Greek
IMP
MT10 X X X

Existing AT235 X X
New AT235 X X X X X X X X X X X X X X X X
Existing AA222 X X
New AA222 X X X X X X X X X X X X X X X X
Titan X X X X X X X X X X X
AUD
AS608 X X X X
AD226 X X X X X X X X X X
AD629 / AD229 X* X* X X* X X X* X X* X* X* X X* X* X X
AC40 X* X* X X* X X X* X X* X* X* X X* X* X X
Suites
Titan suite X X X X X X X X X X X X
DS X X X X X X X X X X X X X X
AD629 Technical Specificatons Page 3

Included and Optional Parts

Included parts DD45 Audiometric headset

B71 Bone conductor
APS3 Patient response button
Goose neck microphone
Power cable
Operation manual CD
Multilingual instructions for use

Optional parts Diagnostic Suite software

OtoAccess database
21925 Amplivox audiocups, noise reducing headset
Carrying case (Standard or Trolly Style)
EARTone3A/5A Audiometric insert phones
IP30 Audiometric insert phones
HDA300 Audiometric headset with double mono 6.3mm jack
TDH39 Audiometric headset
CIR33 Insert earphone set for masking or monitoring
DD450 Audiometric headset
Talk back microphone
Sound field speakers SP90 (with external power amp)
AP12 Power Amplifier 2x12 Watt
AP70 Power Amplifier 2x70 Watt
AD629 Technical Specificatons Page 4

General Technical Specifications

AD629 Technical Specification
Safety Standards IEC 60601-1, ES60601-1, CAN/CSA-C22.2 No.60601-1
Class I, Applied parts type B, Continuous operation

EMC Standard IEC 60601-1-2:2001 + A1:2004

Audiometer Standards Tone Audiometer: IEC 60645 -1, ANSI S3.6 -2010, Type 2, HF IEC 60645-4.
Speech Audiometer: IEC 60645-2/ANSI S3.6 type B or B-E.
Auto threshold tests: ISO 8253-1

Calibration Calibration information and instructions is located in the AD629 Service manual

Air Conduction DD45: PTB/DTU report 2009

TDH39: ISO 389-1 1998, ANSI S3.6-2010
HDA300: PTB report PTB 1.61 – 4064893/13
HDA280 PTB report 2004
E.A.R Tone 3A/5A: ISO 389-2 1994, ANSI S3.6-2010
IP 30: ISO 389-2 1994, ANSI S3.6-2010 DES-2361 CIR 33
ISO 389-2

Bone Conduction B71: ISO 389-3 1994, ANSI S3.6-2010

Placement: Mastoid

Free Field ISO 389-7 2005, ANSI S3.6-2010

High Frequency ISO 389-5 2004, ANSI S3.6-2010

Effective masking ISO 389-4 1994, ANSI S3.6-2010

Transducers DD45 Headband Static Force 4.5N ±0.5N

TDH39 Headband Static Force 4.5N ±0.5N
HDA300 Headband Static Force 4.5N ±0.5N
HDA280 Headband Static Force 5N ±0.5N
DD450 Headband Static Force 10N ±0.5N
B71 Bone Headband Static Force 5.4N ±0.5N
E.A.R Tone 3A/5A:
IP30
CIR 33

Patient Response switch One hand held push button.

Patient communication Talk Forward (TF) and Talk Back (TB).

Monitor Output through built-in speaker or through external earphone or speaker.

Special tests/test battery SISI. ABLB. Stenger. Stenger Speech. Langenbeck (tone in noise). Békésy Test. Weber,
2 channel speech, 2 channels Master Hearing Aid, Auto threshold.
Auto threshold tests:
Available time for patient to respond: Same as tone presentation
Increment of hearing level: 5dB.

Auto threshold test (Békésy):

Mode of operation: Békésy
Rate of level change: 2.5 dB/s ±20%
Smallest increment of level: 0.5 dB

Stimuli

Tone 125-20000Hz separated in two ranges 125-8000Hz and 8000-20000Hz.

Resolution 1/2-1/24 octave.

Warble Tone 1-10 Hz sine +/- 5% modulation

AD629 Technical Specificatons Page 5

Wave file 44100Hz sampling, 16 bits, 2 channels

Masking Automatic selection of narrow band noise (or white noise) for tone presentation and
speech noise for speech presentation.

Narrow band noise:

IEC 60645-1:2001, 5/12 Octave filter with the same centre frequency resolution as pure
Tone.

White noise:
80-20000Hz measured with constant bandwidth

Speech Noise.
IEC 60645-2:1993 125-6000Hz falling 12dB/octave above 1KHz +/-5dB

Presentation Manual or Reverse. Single or multiple pulses.

Intensity Check the accompanying Appendix

Available Intensity Steps is 1, 2 or 5dB

Extended range function: If not activated, the Air Conduction output will be limited to 20 dB
below maximum output.

Frequency range 125Hz to 8kHz (Optional High Frequency: 8 kHz to 20 kHz)

125Hz, 250Hz, 750Hz, 1500Hz and 8kHz may freely be deselected

Speech Frequency Response:

(Typical) Frequecy Linear (dB) FFequv (dB

(Hz) Ext sign1 Int. Sign2 Ext sign1 Int. Sign2
TDH39 125-250 +0/-2 +0/-2 +0/-8 +0/-8
(IEC 60318-3 Coupler) 250-4000 +2/-2 +2/-1 +2/-2 +2/-2
4000-6300 +1/-0 +1/-0 +1/-0 +1/-0

DD45 125-250 +0/-2 +1/-0 +0/- +0/-7

(IEC 60318-3 Coupler) 250-4000 +1/-1 +1/-1 +2/-2 +2/-3
4000-6300 +0/-2 +0/-2 +1/-1 +1/-1

E.A.R Tone 3A 250-4000 +2/-3 +4/-1 (Non

(IEC 60318-5 Coupler) linear)

IP 30 250-4000 +2/-3 +4/-1 (Non linear)

(IEC 60318-5 Coupler)

B71 Bone Conductor 250-4000 +12/-12 +12/-12 (Non linear)

(IEC 60318-6 Coupler)

2% THD at 1000 Hz max output

+9 dB (increasing at lower
frequency)
Level range: -10 to 50 dB HL
1. Ext. sign: CD input 2. Int. sign: Wave files

External signal Speech replaying equipment connected to the CD input must have a signal-to-noise ratio
of 45 dB or higher.

The speech material used must include a calibration signal suitable for adjusting the input
to 0 dBVU.

Free Field Power amplifier and loudspeakers

With an input of 7 Vrms - Amplifier and loudspeakers must be able to create a Sound
Pressure Level of 100 dB in a distance of 1 meter - and meet the following requirements:

Frequency Response Total Harmonic Distortion

125-250 Hz +0/-10 dB 80 dB SPL < 3%
250-4000 Hz ±3 dB 100 dB SPL < 10%
4000-6300 Hz ±5 dB

Internal storage 250 patients and unlimited sessions/measurements/audiograms

AD629 Technical Specificatons Page 6

Signal Indicator(VU) Time weighting: 300mS

Dynamic range: 23dB
Rectifier characteristics: RMS

Selectable inputs are provide with an attenuator by which the level can be adjusted to the
indicator reference position(0dB)

Data Connections (sockets) 4 x USB A (compatible with USB 1.1 and later)
1 x USB B (compatible with USB 1.1 and later)
1 x LAN Ethernet

External devices (USB) Standard PC mouse and keyboard (for data entry)
Supported printers: Standard PCL3 printers (HP, Epson, Canon)

Input Specifications TB 100uVrms at max. gain for 0dB reading

Input impedance : 3.2KOhm

Mic.2 100uVrms at max. gain for 0dB reading

Input impedance : 3.2KOhm

CD 7mVrms at max. gain for 0dB reading

Input impedance : 47KOhm

TF (side panel) 100uVrms at max. gain for 0dB reading

Input impedance : 3.2KOhm

TF (front panel) 100uVrms at max. gain for 0dB reading

Input impedance : 3.2KOhm

Wave files Plays wave file from hard disk drive

Output Specifications FF1 & 2 7Vrms at min. 2KOhm load

60-20000Hz -3dB

Left & Right 7Vrms at 10 Ohms load

60-20000Hz -3dB

Ins. Left & Right 7Vrms at 10 Ohms load

60-20000Hz -3dB

Bone 7Vrms at 10 Ohms load

60-10000Hz -3dB

Ins. Mask 7Vrms at 10 Ohms load

60-20000Hz -3dB

Monitor(side panel) 2x 3Vrms at 32 Ohms / 1.5Vrms at 8 Ohms load

60-20000Hz -3dB

Display 5,7 inch high resolution color display 640x480 pixels

Compatible software Diagnostic Suite - Noah, OtoAccess and XML compatible

Dimensions (LxWxH) 36.5 x 29.5 x 6.5 cm / 14.4 x 11.6 x 2.6 inches

Weight 3.3kg/6.3lb

Power supply 100-240 V~, 50-60Hz max 0.5A

Operation environment Temperature: 15-35°C

Re. Humidity: 30-90% Non condensing

Transport and storage Transport temperature: -20-50°C

Storage temperature: 0-50°C
Re. Humidity: 10-95% Non condensing