Baby

Bunnies – Girls – Pram chain

No. 1001-192-8340

Materials: Usage per bunny approx.:
Rainbow 8/4 Color A: 0,9 oz. (25g)
Crochet hook US size B/1 – C/2 (2,5 mm)
Color B: 0,03 oz. (8g)
3 sets of Safety eyes 6 mm A bit of pink for the snout

2 suspender clips for string Abbreviations:
Polyester string St: Stitch
4 silicone beads 18mm Sc: single crochet
8 silicone beads 15 mm Mr: Magic ring
Fiber filling Ch: Chain
Tog: Together
Measurements:
Blo: Back loop only
Bunny: Approx. height 4.3 inches (11 cm)
Sl st: Slip stitch
Chain: Approx. 17.7 inches (45 cm)
Hdc: Half double crochet
Buy yarn and accessories here:

http://shop.hobbii.com/baby-bunnies-pram-chain-girls

Hobbii.com - Copyright © 2019 - All rights reserved. Page 1





Pattern – you can find instructions at the bottom of the pattern

Legs: Make 2 with color A
1. Make a mr and work 5 sc in the ring (5).
2. Work 2 sc in every st around (10).
3. Work ”1 sc in the first 4 st, 2 sc in next st”. Repeat ” to ” around (12).
4. -7. Work sc around (12). Cut the yarn and weave in the end.
Make another leg but don’t cut the yarn on this one because you work on from here.

Body:
1. Make 2 ch and now work 1 sc into the other leg and work sc in all st (12). Work 1 sc in the 2 ch and
thereafter sc around the first leg (12). Work 1 sc in the other side of the 2 ch (28).

2. Work ”1 sc in the first 6 st, 2 sc in the next”. Repeat “to” around (32).
3. Work sc in all st (32).
4. Work sc in all st (32).
5. Work sc in all st (32).
6. Work ”1 sc in the first 14 st, 2 sc tog”. Repeat ”to” around (30).
7. Work sc through blo around (30).
8. Work ”1 sc in the first 8 st, 2 sc tog”. Repeat ”to” around (27).
9. Work sc in all st (27).

Hobbii.com - Copyright © 2019 - All rights reserved. Page 2




10. Work sc in all st (27).
11. Work ”1 sc in the first 7 st, 2 sc tog”. Repeat ”to” around (24).
12. Work sc in all st (24).
13. Work sc in all st (24). Fill the legs and body with fiber filling.
14. Work ”1 sc in the first 2 st, 2 sc tog”. Repeat ”to” around (18).
15. Work sc in all st (18).
16. Work ”1 sc in the first st, 2 sc tog”. Repeat “to“ around (12).
Fill the rest of the body with fiber filling. Now make the head.

The head:
17. Work 2 sc in all st around (24).
18. Work ”1 sc in the first 3 st, 2 sc in the next st”. Repeat ”to” around (30).
19. Work ”1 sc in the first 4 st, 2 sc in the next st”. Repeat “to“ around (36).
20. -24. Work sc all the way around (36).
25. Work ”1 sc in the first 4 st, 2 sc tog”. Repeat ”to” around (30).
26. Work sc around (30). Place the eyes between round 22 and 23 with 4-5 st between them.
27. Work ”1 sc in the first 3 st, 2 sc tog”. Repeat ”to” around (24).
28. Work ”1 sc in the first 2 st, 2 sc tog”. Repeat ”to” around (18). Completely fill up the head with
fiber filling.
29. Work ”1 sc in the first st, 2 sc tog”. Repeat ”to” around (12).
30. Work 2 sc tog around (6). Sew up the hole and weave in the end.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 3




Dents and snout:

1. With the same color as the head, pull a strand 2. Put the needle down on the left side of the eye
of yarn up and out on the right side of one eye. and tighten a bit.

3. Tighten a bit so there’s a dent under the eye. 4. Now pull the strand of yarn up on the right
side of the other eye.

5. And down again on the left side of the eye. 6. Tighten a bit so the eyes are pulled slightly
back and gives the bunny a cute expression.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 4



7. Sew the snout as on the picture above. It is
sewn over 2-3 st.

Skirt: In color B
1. Turn the bunny so that the head is facing you. Insert the yarn in a chain on the body where there
was worked in blo. Work 1 sc in all chains all the way around and finish with 1 sl st (30).
2. Work 1 ch, 2 hdc in all st around. Finish with 1 sl st in the first hdc (60).
3. Work 1 ch, 2 hdc in all st around. Finish with 1 sl st in the first hdc (120).
Cut the yarn and weave in ends.

1. Turn the bunny so that the head is facing you. 2. Insert the yarn in a chain on the body where
there was worked in blo.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 5



3. Work sc around and finish with 1 sl st. 4. Work 1 ch, 2 hdc in all st around. Finish with 1
sl st in the first hdc.

5. Work 1 ch, 2 hdc in all st around. Finish with 1 6. There. Cut the yarn and weave in ends.
sl st in the first hdc.


Arms: Make 2 with color A
1. Make a mr and work 5 sc in the ring (5).
2. Work 2 sc in all st around (10).
3. Work sc around (10).
4. Work sc around (10).
5. Work ”1 sc in the first 3 st, 2 sc tog”. Repeat ”to” around (8).
6. – 11. Work sc around (8).
Put a little fiber filling in the hand and arm. Fold the arm flat and crochet tog with sc. Leave a long
string for sewing.
Now sew on the arms right below the head. Cut the yarn and weave in ends.



Hobbii.com - Copyright © 2019 - All rights reserved. Page 6




Ears: Make 2 with color A
1. Make a mr and work 5 sc in the ring (5).
2. Work 2 sc in each st around (10).
3. Work 1 sc in each st around (10).
4. Work ”1 sc in the first st, 2 sc in the next st”. Repeat “to” around (15).
5. Work 1 sc in each st around (15).
6. Work ”1 sc in the first 4 st, 2 sc in the next st”. Repeat “to” around (18).
7. Work sc around (18).
8. Work ”1 sc in the first 7 st, 2 sc tog”. Repeat ”to” around (16).
9. Work sc around (16).
10. Work ”1 sc in the first 6 st, 2 sc tog”. Repeat ”to” around (14).
11. Work sc around (14).
12. Work ”1 sc in the first 5 st, 2 sc tog”. Repeat ”to” around (12).
13. Work sc around (12).
14. Work ”1 sc in the first 4 st, 2 sc tog”. Repeat ”to” around (10).
15. -21. Work sc around (10).
Fold the ear flat and crochet tog with sc. Leave a long string for sewing. Now attach the ears on each
side of the head.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 7




Bow: With color B
1. Cast on 7 ch. Work 1 sc in 2nd ch from the hook. Sc for the rest of the row (6).
2. Turn with 1 ch. Sc for the rest of the row (6).
3. Turn with 1 ch. Sc for the rest of the row (6). Cut the yarn and weave in the end.
Wind a piece of string around the middle so the piece gets the shape of a bow. Attach the bow at one of
the ears on the bunny.

Make 3 bunnies with each of their own color skirt and bow.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 8




Assembling:
Now assemble the chain. Cut approx. 27.5 inches (70 cm) of polyester string. Make a loop around the
hole in the clip approx. 4 inches (10 cm) from the end. Hide the end under the first 3 beads (1 small, 1
large, 1 small). Tie a knot after the 3rd bead.

Pull the string through the back side of the head. Tie a knot and place 3 beads (1 small, 1 large, 1
small). Tie a knot after the 3 beads.

Hobbii.com - Copyright © 2019 - All rights reserved. Page 9



Repeat this until all the bunnies are attached. Finish with 3 beads. Make a loop around the hole on the
other clip and pull the end through the last 3 beads so it is hidden.

Have fun! ☺
Kind regards, Hobbii.com

Hobbii.com - Copyright © 2019 - All rights reserved. Page 10