100% found this document useful (1 vote)
79 views

Electrical Load List

This document provides an electrical load list for a water treatment plant project in Brighton & Hove, UK. It lists 9 processes in the water treatment plant including flash mixers, clariflocculators, motive water pumps, agitators, and backwash pumps. For each process, it specifies the motor name, required power rating, full load current, voltage requirements, and estimated annual operating hours to calculate the expected electrical load and power requirements. The total expected electrical load of the water treatment plant is estimated based on the power needs of the individual motors and processes.

Uploaded by

Ahmed Essa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
79 views

Electrical Load List

This document provides an electrical load list for a water treatment plant project in Brighton & Hove, UK. It lists 9 processes in the water treatment plant including flash mixers, clariflocculators, motive water pumps, agitators, and backwash pumps. For each process, it specifies the motor name, required power rating, full load current, voltage requirements, and estimated annual operating hours to calculate the expected electrical load and power requirements. The total expected electrical load of the water treatment plant is estimated based on the power needs of the individual motors and processes.

Uploaded by

Ahmed Essa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Project: Southern water centre of excellence

Scheme: Brighton & Hove scheme


Project reference: 5128877/020

ELECTRICAL CONSUMERS' LIST (LOAD LIST) - WTP

Full load current of the motor


Voltage,Phase & Frequency
Drive

Motor Current to Deliver


Input Current(In Amps)
Absorbed (Input) KVA
Process Section

Type Of Feeder

Plate Rating(KW)

Operating hours

Required Power
Required Rating (KW)

Sp. Gravity of liquid

Efficiency(%)
Load Factor

Input KVAr
Input KW
Sl no.

B KW

Sinø
Efficiency

PF
Q (m3/h

H (m)
Motor Name
Name Tag

1 WTP Flash Mixers 109V-2A/B/C DOL 5.2 5.22 -- -- -- -- 3.48 4.35 83.65 5.37 0.59 3.15 11.16 415V,3Ph & 50Hz 0.81 80 24 29.89 44.66
109V-3A/B/
C/D/E/F/G/H DOL
2 WTP ClariFlocculators 2.2 3.73 -- -- -- -- 3.0 3.24 147.42 3.64 0.46 1.66 3.72 415V,3Ph & 50Hz 0.89 93 24 81.12 59.49
109V-3A/B/
Peripheral Drive mechanism - C/D/E/F/G/H DOL
3 WTP Clariflocculator 2.2 0.99 -- -- -- -- 0.8 0.86 39.31 0.97 0.46 0.44 3.72 415V,3Ph & 50Hz 0.89 93 24 5.41 14.87
109P-10A/
B/C/D DOL
4 WTP Motive Water Pumps for Chlorinators 7 7.00 35 40 1 70% 5.4 6.09 86.94 7.16 0.53 3.77 12.80 415V,3Ph & 50Hz 0.85 90 24 19.92 25.60
109AG-3A/B
DOL
5 WTP Lime Slurry Transfer tank agitator 2.2 1.94 -- -- -- -- 1.5 1.69 76.61 2.06 0.57 1.18 4.19 415V,3Ph & 50Hz 0.82 89 24 2.86 4.19
6 WTP Lime Dosing Tank Agitator 109AG-3A/B DOL 2.2 1.94 -- -- -- -- 1.5 1.69 76.61 2.06 0.57 1.18 4.19 415V,3Ph & 50Hz 0.82 89 24 2.86 4.19
7 WTP Alum Dosing Tank Agitator 109AG-5A/B DOL 2.2 1.93 -- -- -- -- 1.5 1.68 76.18 1.97 0.53 1.04 4.02 415V,3Ph & 50Hz 0.85 90 24 5.49 8.05
8 WTP Emergency Disinfection tank agitator 109AG-5A/B DOL 2.2 1.93 -- -- -- -- 1.5 1.68 76.18 1.97 0.53 1.04 4.02 415V,3Ph & 50Hz 0.85 90 24 5.49 8.05
9 WTP Filter Backwash Pumps 109P-2A/B DOL 150 21.19 314 15 1 80% 16.0 18.43 12.29 20.71 0.46 9.44 269.51 415V,3Ph & 50Hz 0.89 87 3 28.81 269.52
109P-5A/
B/C DOL
10 WTP Clear Water Transfer Pumps 1.5 26.77 417 15 1 70% 24.3 28.63 1908.61 35.34 0.59 20.73 3.03 415V,3Ph & 50Hz 0.81 85 24 196.69 12.12
11 WTP Dewatering Pumps for Clear Water Pump 109P-6A/B DOL 1.5 2.57 30 20 1 70% 2.3 2.75 183.08 3.52 0.63 2.20 3.15 415V,3Ph & 50Hz 0.78 85 24 4.90 3.15
12 WTP Lime Recirculation Pumps 109P-9A/B DOL 1.1 5.57 30 30 1 55% 4.5 4.84 440.35 5.44 0.46 2.48 1.87 415V,3Ph & 50Hz 0.89 92 2 7.57 1.87
13 WTP Air Scouring Blowers 109B-1A/B DOL 55 34.69 27 30.17 54.85 35.49 0.53 18.70 100.58 415V,3Ph & 50Hz 0.85 90 1.5 49.38 100.58
14 WTP Electrically Actuated Valves -- DOL 0.37 0.33 0.23 0.29 77.70 0.35 0.59 0.21 0.79 415V,3Ph & 50Hz 0.81 80 2 1.98 3.18
15 WTP Exhaust fans for Filter House -- DOL 0.75 0.66 0.45 0.58 76.92 0.74 0.63 0.46 1.71 415V,3Ph & 50Hz 0.78 78 23 16.46 27.44
16 WTP EOT for Clear water pump house -- DOL 0.75 3.09 2.2 2.68 357.72 3.27 0.57 1.87 1.55 415V,3Ph & 50Hz 0.82 82 3 4.55 1.55
17 WTP Electrical Hoist for Chemical House -- DOL 0.75 0.70 0.5 0.61 81.30 0.74 0.57 0.43 1.55 415V,3Ph & 50Hz 0.82 82 3 1.03 1.55
18 WTP Ventilation System for Clear Water --
Pump House - Top Floor Floor(03 No. DOL
Axial Exhaust Fans) 3.7 3.68 2.56 3.20 86.49 3.95 0.59 2.32 7.94 415V,3Ph & 50Hz 0.81 80 15 16.49 23.83
--
DOL
19 WTP AC for Control Room, 2 ton, two Nos. 0.55 TBD -ELEC 0.37 0.48 87.37 0.62 0.63 0.39 1.27 415V,3Ph & 50Hz 0.78 77 2 0.86 1.27
--
20 WTP Indoor Lighting and Outdoor Lighting NA 0.37 TBD -ELEC 0.22 0.29 77.22 0.38 0.65 0.24 0.88 415V,3Ph & 50Hz 0.76 77 15 4.18 7.04
21 WTP Exhaust Fans for Chemical House -- NA 0.75 0.45 415V,3Ph & 50Hz 15

135.8 485.93

UCIL-LOAD LIST SHEET 1 OF 1


Motor Loads(In
Power Consumption(KWH)

KW)

Power Supply Fed From


Total Nos. of drives
Normal (Working Drive)

No. stand by
Normal (Connected

No running
Drive)

417.60 5.2 20.8 4 4 0

1,245.41 2.2 35.2 16 16 0

83.03 2.2 8.8 4 4 0

292.11 7 28 4 2 2

40.45 2.2 4.4 2 1 1


Purchaser's 415 V SWGR at Reagent & Causticization Area

40.45 2.2 4.4 2 1 1


80.45 2.2 6.6 3 2 1
80.45 2.2 6.6 3 2 1
55.29 150 300 2 1 1

2,748.39 1.5 9 6 4 2
65.91 1.5 3 2 1 1
9.69 1.1 2.2 2 1 1
45.25 55 110 2 1 1
2.30 0.37 2.22 6 4 2
212.31 0.75 12 16 16 0
8.05 0.75 0.75 1 1 0
1.83 0.75 0.75 1 1 0

144.00 3.7 11.1 3 3 0

0.96 0.55 0.55 1 1 0

34.29 0.37 2.96 8 8 0


5 5 0

5,608.20 569.33

UCIL-LOAD LIST SHEET 1 OF 1

You might also like