Airport Lighting Product Catalog

Crouse-Hinds United States Crouse-Hinds Canada Crouse-Hinds Domex, S.A. de CV

File No: A5312 ISO 9001:2000
1200 Kennedy Road 5925 McLaughlin Road 1170 Javier Rojo Gomez
Windsor, CT 06095 Mississauga, Ontario Col. Guadalupe del Moral, Iztapalapa
Crouse-Hinds
Crouse-HindsAirport
Airport
USA File No: A5312Canada L5R 1B8ISO 9001:2000 Mexico D.F. CP 09850 Lighting
Lighting Products
Products
Tel: 860.683.4300 Tel: 905.507.4187 Mexico ISO 9001:2000
Fax: 860.683.4354 Fax: 800.263.9504 Tel: 011.52.5.804.4000 File No: A5312
Crouse-Hinds Airport
Lighting Products
© Copyright 2008, Cooper Technologies Company PRODCAT 10/08 5M
Table of Contents
Table of Contents..................................................................................................i 3. Approach & Navigational Aids, continued
Terms and Conditions........................................................................................ii
Specifications and Standards........................................................................ iv IAL Inset Approach Light................................................. 3.20
Application Overview....................................................................................... vi IALE Inset Approach Light................................................. 3.24
ITAL Inset Threshold and Approach Light.................. 3.28
1. Runway and Taxiway Inset Lights WC Wind Cone...................................................................... 3.32
RCL/TDZ 8” PRO III Runway Centerline/ 4. Power & Control Equipment
Touchdown Zone Light...............................................1.2
RCL/TDZ 12” PRO III Runway Centerline/ REGF Constant Current Regulators –
Touchdown Zone Light...............................................1.4 Ferroresonant (Small)...................................................4.2
RCLI/TDZI PRO III Runway Centerline/ REGF1 Constant Current Regulators –
Touchdown Zone/ Ferroresonant (Medium).............................................4.4
Rapid Exit Taxiway Indicator Light (ICAO)...........1.6 REGF2 Constant Current Regulators –
IREL PRO III Inset Runway Edge Light..............................1.8 Ferroresonant (Large)...................................................4.6
IRELI PRO III Inset Runway Edge Light (ICAO)............ 1.10 CCR-SGS Constant Current Regulator
IRTEL PRO III Inset Runway Threshold/End Light....... 1.14 (Switchgear System)......................................................4.8
RTEL Runway Threshold/End Light................................. 1.16 C-SGS Cabinet (Switchgear)................................................. 4.10
IRTL PRO III Inset Runway Threshold Light................. 1.18 REGW Constant Current Regulators –
ATL Approach Threshold Light...................................... 1.20 Wet (Large)..................................................................... 4.12
LHS Land & Hold Short Light........................................... 1.22 REGD Constant Current Regulators –
TCL PRO III Taxiway Centerline Light........................... 1.24 Dry (Small)...................................................................... 4.14
TCL 6 PRO III Taxiway Centerline Light........................... 1.26 REGD Constant Current Regulators –
TCL 8” PRO III Taxiway Centerline Light (LED)............... 1.28 Dry (Large)...................................................................... 4.16
TCL1 PRO III Taxiway Centerline Light CCRO Constant Current Regulators Options
(Single Lamp)................................................................ 1.30 (For REGD & REGW Units)......................................... 4.18
FTCL PRO III Taxiway Centerline Light........................... 1.32 LAHSO Land & Hold Short Lighting System
TCLI Taxiway Centerline Light (ICAO)........................... 1.34 Power & Control Unit (PCU).................................... 4.20
FTCLI Taxiway Centerline Light (ICAO)........................... 1.36 CSC Circuit Selector Switch.............................................. 4.24
IRGL/ISBL Inset Stop Bar and Runway Guard Lights......... 1.38 RC Radio Controller........................................................... 4.26
SBGL Inset Stop Bar/Runway Guard Light.................... 1.40 SPC2 Series Plug Cutout Type S-1 (Model 2)............... 4.27
RCLN Runway Centerline Light (NAVY).......................... 1.42 DIGITRAC Computer Control System....................................... 4.28
TOL3 PRO III Omnidirectional Taxiway Light............... 1.44 TRANS Series Isolation Transformers................................. 4.30
TOL4 PRO III Omnidirectional Taxiway CKP Primary Connector Kits............................................. 4.32
Edge Light (LED).......................................................... 1.46 CKS Secondary Connector Kits....................................... 4.33
TOL Taxiway Omnidirectional Light............................. 1.48 HSK Heat Shrink Kits............................................................ 4.34
CA Cable Assemblies......................................................... 4.35
2. Runway & Taxiway Elevated Lights
5. Guidance Signs
ERL Elevated Runway Light................................................2.2
HRLQ High Intensity Runway Light/Quartz......................2.4 AGS-2 Airside Guidance Signs................................................5.2
HRLI High Intensity Runway Light/Quartz......................2.6 AGSF Airside Guidance Signs (Fiberglass)........................5.6
HRLQ-5 High Intensity Runway Light/Quartz......................2.8 AGSI Airside Guidance Signs (ICAO)............................... 5.10
SBL Elevated Stop Bar Light............................................ 2.10 AGSU Airside Guidance Signs (Unlighted)..................... 5.14
RGL Runway Guard Light.................................................. 2.12 DMS Distance Marker Sign (Fiberglass)........................ 5.15
TEL-5 Medium Intensity Runway Threshold/ 6. Tools and Markers
End Light......................................................................... 2.14
TEL Taxiway Edge Light (LED)........................................ 2.16 TOOLS Tools and Accessories...................................................6.2
TEK-TOOLS Crimping Tools................................................................6.4
3. Approach & Navigational Aids FC Frangible Couplings......................................................6.6
PAPI Precision Approach Path Indicator.........................3.2 TRM Taxiway Reflective Marker..........................................6.8
REIL Runway End Identifier Lights....................................3.6 7. Airport Light Bases
ALSF Flasher System.................................................................3.8
ARB Airport Rotating Beacon........................................... 3.10 ALB Airport Light Bases.........................................................7.2
EAL Elevated Approach Light......................................... 3.12 SIB-D12 Shallow Inset Light Base (12” Ductile Iron)..........7.4
EALK Elevated Approach Light/PK-30 Type................. 3.16 SIB-A12 Shallow Inset Light Base (12” Aluminum)............7.6
SIB-8 Shallow Inset Light Base (8” Aluminum ICAO)...7.7

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai i
 AIRPORT LIGHTING PRODUCTS
STANDARD TERMS AND
CONDITIONS OF SALE

Terms and Conditions

Note 1.  ACCEPTANCE OF ORDERS (b) Claims for billing errors on invoices must be made to Crouse-Hinds within 30 days from
(a) Unless otherwise specifically agreed in writing by an authorized representative of the date of the invoice.
Crouse-Hinds Airport Lighting Products (“Crouse-Hinds”), a division of Cooper Industries, (c) Price Protection: Written quotations are firm for 31 days from the date of the Crouse-
Inc., the following terms and conditions of sale shall apply to all contracts resulting from Hinds quotation.
Crouse-Hinds’ acceptance of customer’s order for products, materials, supplies, compo-
(d) Cancellation: Orders may be cancelled only with Crouse-Hinds’ prior written consent.
nents, drawings, data or any other items. All quotations and bids, and the acceptance of
In order to reimburse Crouse-Hinds for all applicable costs incurred by virtue of the order,
all contracts and orders, are subject to final written approval and acceptance by the home
including costs of purchased materials, engineering costs, and a reasonable allowance for
office of Crouse-Hinds Airport Lighting Products in Windsor, Connecticut.
profit, a cancellation charge may be made when an order is cancelled. Partial cancellation
(b) Crouse-Hinds will accept orders and bill in accordance with published prices in Crouse- of an order may necessitate a small order handling charge and eliminate prepayment of
Hinds’ current price list and terms found herein, even though incorrect or conflicting prices freight.
and terms may appear on the customer’s purchase order.
(e) Additions to orders already processed will be considered separate orders.
(c) Prices are stated in U.S. dollars, are exclusive of sales, use, excise or similar taxes, and
(f) Partial shipments made at the customer’s request will be considered as separate orders
are subject to any price adjustment necessitated by Crouse-Hinds’ compliance with appli-
for determination of shipping charges, freight prepayment, and whether the small order
cable laws or any act of government.
handling charge applies.
Note 2.  TERMS
Note 4.  SPECIAL CHARGES
DOMESTIC ORDERS (a) Due to the cost of handling small orders, a minimum billing of $100.00 net will be
Payment terms are net 30 days after date of invoice. Crouse-Hinds reserves the right to made.
modify or withdraw credit terms at any time without notice and to require guarantees, (b) An extra charge will be made for special packing.
security or payment in advance of the amount of credit involved or payment in advance
of shipment of products if the customer fails to fulfill the terms of payment. Crouse-Hinds Note 5.  TAXES
may defer further shipments to the customer or, at its option, cancel the unshipped portion Crouse-Hinds reserves the right to add to the price of such products at any time an amount
of the customer’s order. The customer agrees to pay interest on all past due invoices at the equivalent to any duties, imports, revenues, sales, use, manufacturer’s payroll, excise or
rate of 1% per month. Payments are to be in United States currency. other taxes which may be imposed and made applicable to its products.
EXPORT ORDERS Note 6.  SHIPMENT AND DELIVERY
Unless Crouse-Hinds has agreed in writing to extend credit, the customer shall make pay- (a) All material is sold FOB Crouse-Hinds Point of Shipment. Risk of loss passes to customer
ment for export orders as follows: upon delivery to the Common Carrier at Crouse-Hinds Point of Shipment. (The customer
(a) Payment must be made through a letter of credit, established by the customer at its should file with the transportation company any claim for loss or damage in transit within
own expense, including any bank confirmation charges. Letters of credit shall be in favor of 30 days from the date of delivery or what would be considered the normal delivery date.
and acceptable to Crouse-Hinds, shall be in sufficient amounts and for the period necessary Since shipments are made at released value, customer should carry its own insurance for
to meet all payment obligations, shall be payable upon presentment of invoice and bill of any deficiency in carrier coverage.) Risk of loss for damages to the products sold hereunder
lading, and shall be unconditional, irrevocable, and confirmed by a U.S. bank acceptable to passes to the Buyer upon delivery to the carrier regardless of F.O.B point. Title to the prod-
Crouse-Hinds. ucts sold hereunder passes to Buyer upon payment of the full purchase price.
(b) Partial shipments shall be permitted at Crouse-Hinds’ discretion unless otherwise (b) Shipment will be made by surface freight FOB Crouse-Hinds Point of Shipment. For
agreed by Crouse-Hinds and customer in writing at the time the customer places its order. all orders totaling $2,500.00 net or more, freight will be prepaid and allowed to any
free delivery point on a common carrier to any state of the United States except Alaska
(c) Charges for insurance, freight, dock handling, storage, forwarding and related items, and Hawaii. Freight on shipments to Alaska or Hawaii will require a minimum value of
when quoted by Crouse-Hinds, are ESTIMATES ONLY. Such charges shall be for customer’s $3,000.00 net to earn prepaid and allowed freight. No freight allowed for orders under
account and invoiced at actual charges. $2,500.00 net. Such orders will be shipped freight collect. No freight allowance will be
(d) Export packaging or any special handling requested by customer shall be at its expense. made on shipments forwarded collect at the request of the customer.
If credit terms have been extended to the customer, payment terms are net 30 days after (c) Crouse-Hinds will use its own discretion in routing all shipments upon which it assumes
date of invoice. Crouse-Hinds reserves the right to modify or withdraw credit terms at any transportation charges. Where practical to do so, shipments will be made in any manner
time without notice and to require guarantees, security or payment in advance of the requested by the customer, if the customer will assume the extra transportation costs.
amount of credit involved, or payment in advance of shipment of products, if the customer (d) Express, parcel post and air shipments amounting to $2,500.00 net or over will be
fails to fulfill the terms of payment. Crouse-Hinds may defer further shipments to the cus- made, at the customer’s request, with transportation charges collect or prepaid and added
tomer or, at its option, cancel the unshipped portion of the customer’s order. to the invoice. A deduction of 1.0% of the face value of the invoice will be made as an offset
The customer agrees to pay interest on all past due invoices at the rate of 1% to the freight charges. No such deduction will be made for shipments of lesser amounts.
per month. Payments are to be in United States currency and shall be made by e) Partial shipments made at the customer’s request must each total $2,500.00 net or
customer without regard to exchange rate fluctuations. more for prepaid transportation. No freight allowed or partial shipments under $2,500.00
Note 3.  IMPORTANT PRICE INFORMATION net. Such orders will be shipped freight collect.
(a) Billing Price: Orders, except “Hold for Release” and orders with deferred ship dates, f) Unless otherwise agreed by Crouse-Hinds and the customer in writing, Crouse-Hinds
will be billed at the price in effect at the acceptance of the order. “Hold for Release” orders may make partial shipments at its discretion. In the case of partial shipments of an order,
will be billed at price in effect on date of release. Deferred orders will be billed at prices in Crouse-Hinds will invoice each shipment as it is made, but on terms applicable to the
effect on date of shipment. entire order.

www.chalp.com
ii
g) Crouse-Hinds will not assume, allow, or pay any charges for cartage. The customer Crouse-Hinds shall have no further obligations under this agreement except to refund
should inspect all material upon receipt. All claims for damages, errors or shortages, other such purchase price upon redelivery of the products. THE REMEDIES PROVIDED FOR IN
than attributable to in-transit handling, must be made by the customer within thirty (30) THIS AND THE PRECEDING PARAGRAPH SHALL CONSTITUTE THE SOLE RECOURSE
days from receipt of the shipment at destination. The customer’s failure to make such OF CUSTOMER AGAINST CROUSE-HINDS FOR BREACH OF ANY OF CROUSE-HINDS’
claims within a thirty (30) day period shall constitute irrevocable acceptance of the mate- OBLIGATIONS UNDER THIS AGREEMENT, WHETHER THE CLAIM IS MADE IN TORT
rial. The customer must report damage or loss attributable to in-transit handling to the OR CONTRACT, INCLUDING CLAIMS BASED ON WARRANTY, NEGLIGENCE, STRICT
transportation company and request inspection within 30 days from the date of delivery. LIABILITY, OR OTHERWISE.
(h) Crouse-Hinds will make reasonable efforts to ship as scheduled. However, Crouse- IN NO EVENT SHALL CROUSE-HINDS BE LIABLE FOR SPECIAL, INDIRECT,
Hinds shall not be liable for any failure to perform or delay in performing its obligations INCIDENTAL OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE
under this agreement resulting directly or indirectly from or contributed to by any strikes, FORM OF ACTION, WHETHER IN CONTRACT OR TORT, INCLUDING
lockouts, or other labor disturbances, fires, floods, epidemics, war, riot, or embargoes, NEGLIGENCE AND STRICT LIABILITY) NOR FOR LOST PROFITS, NOR SHALL
breakdowns, lack of or inability to obtain raw materials, components, labor, fuel or sup- CROUSE-HINDS’ LIABILITY FOR ANY CLAIMS OR DAMAGES ARISING OUT OF OR
plies, lack of shipping space, lack of customer approvals, correction or clarification of CONNECTED WITH THIS AGREEMENT OR THE MANUFACTURE, SALES, DELIVERY OR
orders, governmental regulations, acts of God, or any circumstances beyond the control of USE OF THE PRODUCTS EXCEED THE PURCHASE PRICE OF THE PRODUCTS.
Crouse-Hinds.
Note 12.  CHANGES; ENTIRE AGREEMENT; GOVERNING
(i) Orders received with a “HOLD” (for release, for approval, etc.) are not processed for
manufacture until release is given. Normal shipping time will apply starting from time of LAW
release. These Standard Terms and Conditions of Sales, together with Crouse-Hinds’ acknowledg-
ment of customer’s order, contain the entire agreement between the customer and
Note 7.  STANDING INSTRUCTION Crouse-Hinds and may not be modified, waived, rescinded, or terminated in whole or in
Crouse-Hinds cannot accept standing, general, or blanket instructions. Each transaction part except by a writing signed by the party against whom it is to be enforced. Any dif-
must be accompanied by full instructions on the order itself. ferent or additional terms and conditions proposed by customer in its order or otherwise
are hereby rejected by Crouse-Hinds and shall not be incorporated into this agreement.
Note 8.  RETURN OF MATERIAL This agreement shall be governed by and interpreted in accordance with the laws of the
Material may be returned for credit only when authorized in writing by Crouse-Hinds. State of New York, including its provisions of the Uniform Commercial Code. In the case
Returned material subject to a standard 30% restocking fee. of export orders, Crouse-Hinds and customer agree that such laws shall govern the par-
Note 9.  GOVERNMENT RESTRICTIONS ties’ agreement instead of the provision of the 1980 U.N. Convention on Contracts for the
The acceptance, processing and fulfillment of orders will be subject to and contingent upon International Sales of Goods.
restrictions and conditions imposed by the governments having jurisdiction over points of Note 13.  IMPORTANT NOTICE
manufacture or passage of the merchandise. The product information published in our catalogs and literature is not guaranteed. It
Note 10.  LIMITED WARRANTY has been compiled with care and is sufficiently accurate for most purposes. It is subject to
Products (excluding lamps) of Crouse-Hinds’ manufacture are warranted against defects change without notice. Occasionally it may be necessary to modify the materials, finishes,
in workmanship and material for a period of one year from the date of installation or two or other components of the product without reducing the performance or function of the
years from date of shipment from the factory, provided that no warranty is made with product.
respect to: Note 14.  CONFIDENTIAL INFORMATION
(a) any product which has been repaired or altered in such way, in Crouse-Hinds’ judg- The customer agrees that it will not disclose to Crouse-Hinds any confidential information
ment, as to affect the product adversely, of the customer unless Crouse-Hinds has, prior to such disclosure, agreed in writing to
(b) any product which has, in Crouse-Hinds’ judgment, been subjected to negligence, accept such information as confidential under clearly defined obligations of confidence.
accident, or improper storage, The customer agrees that all information disclosed by it (except such information as is spe-
cifically subject to a written confidentiality agreement which has been executed by Crouse-
(c) any product which has not been operated and maintained in accordance with normal
Hinds prior to such disclosure) is non-confidential information, and that Crouse-Hinds is
practice and in conformity with recommendations and published specifications of Crouse-
free to use and disclose any of such information without accounting to customer therefor.
Hinds, and
Crouse-Hinds shall not be obligated to treat as confidential any information already known
(d) any products, component parts or accessories manufactured by others but sup- by it, or information that is or becomes public knowledge without the fault of Crouse-
plied by Crouse-Hinds (any claims should be submitted directly to the manufacturer Hinds, or information that is properly acquired by Crouse-Hinds from a third party.
thereof). THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT Note 15.  PATENTS
BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR Crouse-Hinds expressly disclaims any warranty that the products sold to customer do not
ANY PARTICULAR PURPOSE. CROUSE-HINDS’ OBLIGATION UNDER THIS WARRANTY infringe any intellectual property right of any third party, including, without limitation,
IS LIMITED TO THE FURNISHING OF NEW PARTS FREE OF CHARGE IN EXCHANGE any patent granted to such third party by any governmental or other body.
FOR PARTS WHICH HAVE PROVEN DEFECTIVE AND DOES NOT INCLUDE ANY OTHER
Note 16.  ASSIGNMENT
COSTS SUCH AS THE COST OF REMOVAL OF DEFECTIVE PARTS, INSTALLATION,
This agreement is not assignable without the prior written consent of Crouse-Hinds. Any
LABOR, OR ANY OTHER DAMAGES OF ANY KIND, THE EXCLUSIVE REMEDY OF THE
attempt by the customer to assign any of the rights, duties, or obligations of this agree-
PURCHASER FOR BREACH OF WARRANTY BEING TO REQUIRE SUCH NEW PARTS TO
ment without such consent shall be void.
BE FURNISHED. Crouse-Hinds assumes no responsibility for proper selection and instal-
lation of its products. Note 17. Approved Component Parts
Crouse-Hinds Airport Lighting Products are certified to FAA - AC 150/5345-53 for airport
Note 11. EXCLUSIVITY OF REMEDY;
lighting equipment. Modification to any product will void warranty and FAA certifications.
LIMITATION OF LIABILITY The owner assumes all liability associated with the use of non Crouse-Hinds parts.
Crouse-Hinds’ entire liability and customer’s exclusive remedy shall be as follows: In the
event that customer claims that Crouse-Hinds has breached any of its obligations under
this agreement, whether of warranty or for any cause whatsoever, whether in contract
or in tort, including negligence and strict liability, Crouse-Hinds may request the return of
the products and tender to customer the purchase price paid therefor, and in such event,

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai iii
 Specifications &
AIRPORT LIGHTING PRODUCTS

Standards
Federal Aviation Administration
Specification Advisory Circular Equipment Description Product Page No.
L-801 150/5345-12 Beacons ARB 3.10
L-802 150/5345-12 Beacons, High Intensity ARB 3.10
L-804 150/5345-46 Light, Holding Position Edge RGL 2.12
L-806 150/5345-27 Wind Cones, Frangible WC 3.32
L-807 150/5345-27 Wind Cones, Rigid WC 3.32
L-821 150/5345-3 Panel, Airport Lighting Control * —
L-823 150/5345-26 Connectors, Cable CKP/CKS 4.32/4.33
L-828 150/5345-10 Regulators, Constant Current REGD/REGW 4.14/4.12
L-829 150/5345-10 Regulators, Constant Current with Monitor REGD/REGW 4.14/4.12
L-830 150/5345-47 Transformers, Isolation, 60 Hz TRANS 4.30
L-831 150/5345-47 Transformers, Isolation, 50 Hz TRANS 4.30
L-847 150/5345-5 Switch, Circuit Selector CSC 4.24
L-849 150/5345-51 Lights, Runway End Identification REIL 3.6
1.2,1.4/1.2,1.4/
L-850 150/5345-46 Lights, Runway Inpavement RCL/TDZ/RTEL/ATL
1.16/1.20
1.24,1.26,1.28
L-852 150/5345-46 Lights, Taxiway, Inpavement TCL/TOL
/1.46
L-853 150/5345-39 Markers, Retroreflective TRM 6.8
L-854 150/5345-49 Radio Controllers RC 4.26
L-858 150/5345-44 Signs, Taxiway Guidance DMS 5.15
L-861 150/5345-46 Lights, Runway & Taxiway Edge, Medium Intensity ERL 2.2
L-862 150/5345-46 Lights, Runway Edge, High Intensity HRLQ/HRLQ-5 2.4/2.8
L-867 150/5345-42 Light Base, Non-Load Bearing ALB 7.2
L-868 150/5345-42 Light Base, Load Bearing ALB 7.2
L-880 150/5345-28 Precision Approach Path Indicator PAPI 3.2
L-881 150/5345-28 Precision Approach Path Indicator, Abbreviated PAPI 3.2
L-890 150/5345-56 Airfield Lighting Control & Monitoring System DIGITRAC 4.28
* Contact Crouse-Hinds

Note: All Specifications & Standards in this general guide are subject to the latest issue revisions which are not noted herein. Equipment compliances
are subject to change without notice.

www.chalp.com
iv
International Civil Aviation Organization

Isocandela Inpavement Elevated

Specification Diagram
Specification Paragraph Equipment Description Appendix 2 Product Page No. Product Page No.
5.1.1 Windcone WC 3.32
5.3.3 Aeronautical Beacon ARB 3.10
5.3.4 Approach Centerline A2-1 IAL 3.20 EALK 3.16
5.3.4 Approach Side Row A2-2 IAL 3.20 EALK 3.16
5.3.4, 5.3.10 Approach Threshold A2-3 IAL 3.20 EALK 3.16
5.3.4, 5.3.10 Approach Wing Bar A2-4 IAL 3.20 EALK 3.16
5.3.4 Sequence Flashing Light ALSF 3.8
5.3.4 Runway Threshold Identification Light REIL 3.6
5.3.5 PAPI & APAPI PAPI 3.2
5.3.9 Runway Edge A2-9 & A2-10 IREL/IRELI 1.4/1.10 HRLI 2.6
5.3.11 Runway End A2-8 IAL/RTEL 3.20/1.16 EALK 3.16
5.3.12 Runway Centerline A2-6 & A2-7 RCL/RCLI 1.2,1.4/1.6
5.3.14 Rapid Exit Taxiway Indicator A2-6 & A2-7 RCLI 1.6
5.3.13 Touchdown Zone A2-5 TDZ/TDZI 1.2,1.4/1.6
ICAO Annex 14,
Volume 1 HRLQ/
5.3.15 Stopway RCL/RCLI 1.2,1.4/1.6 2.4/2.8
HRLQ5
Taxiway Centerline / Stop Bar CAT III
5.3.16 & 5.3.19 A2-12 TCLI/FTCLI 1.34/1.36
Straight Section - Wide Beam
Taxiway Centerline / Stop Bar CAT III
5.3.16 & 5.3.19 A2-13 TCLI/FTCLI 1.34/1.36
Straight Section - Narrow Beam
Taxiway Centerline / Stop Bar CAT III
5.3.16 & 5.3.19 A2-14 TCLI/FTCLI 1.34/1.36
Curved Sections
Taxiway Centerline / Stop Bar CAT II
5.3.16 & 5.3.19 A2-15 TCLI/FTCLI 1.34/1.36
Straight Section - Wide Beam
Taxiway Centerline / Stop Bar CAT II
5.3.16 & 5.3.19 A2-16 TCLI/FTCLI 1.34/1.36
Curved Sections
1.48/
TOL/TOL3/
5.3.17 Taxiway Edge 1.44/ ERL 2.2
TOL4
1.46
5.3.22 Runway Guard Light A2-20 & A2-25 IRGL/SBGL 1.38/1.40 RGL 2.12
5.4 and
Airside Guidance Sign AGSI 5.10
Appendix 4
REGF,
4.2,4.12,
3.2.1.4 to 3.2.1.6 Constant Current Regulator — REGW, —
Aerodrome 4.14,4.16
REGD
Design Manual,
Part 5 3.2.1.7 Isolating Transformer — TRANS 4.30 —
3.4.6 Radio Remote Control — RC 4.26 —

Note: All Specifications & Standards in this general guide are subject to the latest issue revisions which are not noted herein. Equipment compliances
are subject to change without notice.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai v
 AIRPORT LIGHTING PRODUCTS

Application Overview
Originally created to meet the needs of the fledgling specifications. No matter what your application we
Aviation industry Crouse-Hinds Airport lighting has produce a fixture to meet your needs; from approach
grown into an industry leading global manufacturer to taxiways Crouse has the products. We manufacture
of airfield lighting. Our fixtures are operating night inset and elevated lighting, power and control
and day all over the world. CHALP products are systems in addition to obstruction lighting for all
requested by major airports because our fixtures airfield operating conditions. Utilizing incandescent,
have performed dependably in the most challenging fluorescent and LED light sources, the best possible
environments for decades. Crouse-Hinds builds resource solution is applied to your airfield’s needs.
quality and performance into every product. We work
with both the Federal Aviation Administration and the
International Civil Aeronautics Organization providing
the best possible product to the aviation community.

Airfields present unique environmental, mechanical

and photometric needs. How you address those needs
depends on what meteorological conditions you will
be operating under. Crouse-Hinds Airport Lighting
produces fixtures to meet the latest FAA & ICAO

Section 1 — Runway and Taxiway Inset Lights

Runways and taxiways are the operational backbone of the

airfield and pose unique environmental, mechanical and
photometric needs. How you address those needs depends
on what category certification you will be operating under.
Location, color and intensity are all important to the pilot when
determining his position on the airfield. The Federal Aviation
Administration has set forth standards dictating how fixtures
must perform determined by fixture location on the field and
the present operating conditions. Crouse-Hinds Airport Lighting
Products has the correct fixture for your airfields operating cat-
egory certification.
Application Icons

Inset Runway Inset Runway Inset Inset Inset Land & Inset Stop Touchdown
& Taxiway & Taxiway Threshold/ Approach & Hold Short Bar & Guard Zone Lighting
Center-Line Edge Lighting End Lighting Threshold Lighting Lighting
Lighting Lighting

www.chalp.com
vi
Section 2 — Runway and Taxiway Elevated Lights

Runways and taxiways are the operational backbone of the

airfield and just like inset fixtures elevated fixtures provide vital
movement information to the pilot. Location, color and inten-
sity are all important to the pilot when determining his position
on the airfield. The Federal Aviation Administration has set
forth standards dictating how elevated fixtures must perform
Application Icons determined by fixture location on the field and the operating
conditions. For elevated fixtures Crouse-Hinds Airport Lighting
Products has the correct fixture for your airfields operating cat-
egory certification.

Runway Light Runway/ Elevated Stop

Threshold Bar Light
Light

Section 3 — Approach & Navigational Aids

Coordinating movement on the airfield is crucial to the safe

and efficient operation of any airfield. Add to that flight opera-
tions taking place in unique environmental conditions and the
needs for highly visible airfield markers takes on even more
importance. How you address those needs depends on what
meteorological conditions you will be operating under. Location,
color and intensity are all important to the pilot when determin-
ing his position and movement options on the airfield. The
Federal Aviation Administration has set forth standards dictat-
ing how signs must perform and where they must be located.
Crouse-Hinds Airport Lighting Products has the signs designed
to meet those standards for your airfields needs in all certifica-
tion categories.
Application Icons

PAPI Runway End Flash System Rotating Approach Threshold and Wind Cone
Beacon Approach

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai vii
 Section 4 — Power & Control Equipment

Power and control are at the heart of the lighting control system
for any airfield. The Federal Aviation Administration has set
forth standards dictating how fixtures and signs may be pow-
ered and controlled. Crouse-Hinds Airport Lighting Products
has the constant current Ferro-resonant and series type regu-
Application Icons lators in a variety of sizes for all airports. Our regulators and
control gear are designed to provide precision control of airfield
circuits and interface with a wide array of control and monitoring
options.

Power Vault Lighting

Control

Section 5 — Guidance Signs

APRON APRON

Z X
Z W

Z W

Z X

Z X

The safe and efficient movement of aircraft around the airfield

is of paramount importance. The FAA and ICAO have set color,
intensity, performance and location standards for all airfield
Y Z

guidance signs. In concert with inset and elevated airfield light-

ing fixtures guidance signs allow the pilot to move efficiently
Z 19-01 Z 19-01
Z 01-19 Z 01-19
Z 19 CAT III Z 19 CAT III

around the airfield whether in New York, Cairo or Beijing.

Z

Z
1

Application Icon

Airfield
Guidance
Sign

www.chalp.com
v iii
 v

SECTION 1

Runway & Taxiway

Inset Lights

Runway and Taxiway Inset Lights

Runways and taxiways are the operational backbone of the Aviation Administration has set forth standards dictating how
airfield and pose unique environmental, mechanical and fixtures must perform determined by fixture location on the
photometric needs. How you address those needs depends field and the present operating conditions. Crouse-Hinds
on what category certification you will be operating under. Airport Lighting Products has the correct fixture for your air-
Location, color and intensity are all important to the pilot fields operating category certification.
when determining his position on the airfield. The Federal

Application Icons

Inset Runway Inset Runway Inset Inset Inset Land & Inset Stop Touchdown
& Taxiway & Taxiway Threshold/ Approach & Hold Short Bar & Guard Zone Lighting
Center-Line Edge Lighting End Lighting Threshold Lighting Lighting
Lighting Lighting
 PRO III ™ AIRPORT LIGHTING PRODUCTS

RCL/TDZ
Runway Centerline Light or
Touchdown Zone Light
Compliances: FAA AC 150/5345-46: L-850A; L-850B
ICAO Annex 14: Fig. A2-5 and A2-7
USN NAVAIR 51-50AAA-2
Transport Canada Specification K 271: Fig B5 and B8
UFC 3-535-01 RCL / TDZ 8”
8” with12” Ring

Applications Ordering Information

The RCL/TDZ light does double 8 5 0 3 – – – – –
duty as a runway centerline light
and touchdown zone light. The
RCL is a bidirectional light, typically
Fixture Type:
clear/clear or clear/red, with two
A = Runway centerline light
48 W lamps. The TDZ is a clear
B = Touchdown zone light
unidirectional light, with a 48 W
lamp. RCL /TDZ may be used for any
Color Filters:
category FAA, ICAO, or military runway.
CC = Clear/Clear (L-850A)
Features CR = Clear/Red (L-850A)
RX = Red/Blank (L-850A)
• ETL Certified
C = Clear (L-850B)
• Low Profile, < .25˝ (6mm) – CX = Clear/Blank
FAA Style 3
• Unique combination of high-strength Fixture Diameter:
aluminum optical assembly and 12F = Optical assembly with 12˝ FAA support ring
ductile iron outer ring for Snow Plow NSR = Optical assembly without support ring
Protection
L-823 Plug Connection:
• Low Power Consumption
P1 = One plug
• Few Parts to Stock P2 = Two plugs (L-850A only)
• Beam Orientation can be easily
changed to left or right toe-in Beam Orientation (L-850B only):
L = Left Toe-in
• Easy to maintain –
R = Right Toe-in
no sealant required for prism
S = Straight
or feed-through assembly replacement
• Pressure test plug for seal integrity Option:
verification G = External gasket between optical assembly and support ring*
• Long Lamp Life –
Quartz Halogen, 48 W * Optical assemblies with this option only fit support rings marked “G” on top surface.

www.chalp.com
1.2
 Outline Drawings
LENS BOOT LENS OPTICAL HOUSING

Dimensions: inches 11.94 (303) DIA

(mm) .25
(6)
Instruction Manual: 9913
.75
(19)
Shipping Weight: 23.0 lbs
10.4 kg
SUPPORT RING
INNER COVER GASKET
Shipping Volume: 0.7 cu ft 2.50
(64)
0.02 m3 LAMP ASSEMBLY

FEED-THROUGH ASSEMBLY wITH L-823 PLUG PRESSURE TEST PLUG INNER COVER

Typical Photometric Data

5,000 CD AVERAGE REQUIRED 5,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE–5,763 CD SHOWN) (ACTUAL AVERAGE–6,290 CD SHOWN)
2,500 CD MINIMUM REQUIRED 2,500 CD MINIMUM REQUIRED
500 CD MINIMUM REQUIRED 500 CD MINIMUM REQUIRED

12 12
5000 CD 5000 CD
VERTICAL ANGLE

VERTICAL ANGLE
8 8

2500 CD 2500 CD
4 4

0 0
-15 -10 -5 0 5 10 15 -10 -5 0 5 10 15
HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELA CD = CANDELA

L-850A Runway Centerline Light L-850B Touchdown Zone Light

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I, 24˝ Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D.

Runway and Taxiway Inset Lights

33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 21180 External Support Ring Gasket

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-R Lens Replacement Kit – Red 10048-25 Gasket Lubricant – 5.3 oz Container
10035-62 Gasket – Bottom Cover 850X3-XX-NSR-XXX Spare Optical Assembly

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 3
 PRO III ™ AIRPORT LIGHTING PRODUCTS

RCL/TDZ
Runway Centerline Light or
Touchdown Zone Light or
Rapid Exit Taxiway Indicator Light
Compliances: FAA AC 150/5345-46: L-850A; L-850B
ICAO Annex 14: Fig. 2.5 and 2.7
USN NAVAIR 51-50AAA-2
Transport Canada Specification K 271: Fig B5 and B8
UFC 3-535-01 RCL / TDZ 12”
1 Piece 12” Fixture

Applications Ordering Information

The RCL/TDZ light does double duty 8 5 0 3 – – –
as a runway centerline light and
touchdown zone light. The RCL
is a bidirectional light, typically
Fixture Type:
clear/clear or clear/red, with two
A = Runway centerline light
48 W lamps. The TDZ is a clear
B = Touchdown zone light
unidirectional light, with a 48 W
lamp. RCL /TDZ may be used for
Color Filters:
any category FAA, ICAO, or military
CC = Clear/Clear (L-850A)
runway.
CR = Clear/Red (L-850A)
Features RX = Red/Blank (L-850A)
• ETL Certified C = Clear (L-850B)
CX = Clear/Blank
• Low Profile, < .25˝ (6mm) –
FAA Style 3 L-823 Plug Connection:
• High-strength aluminum optical P1 = One plug
assembly P2 = Two plugs (L-850A only)
• Low Power Consumption
Beam Orientation (L-850B only):
• Few Parts to Stock
L = Left Toe-in
• Beam Orientation can be easily R = Right Toe-in
changed to left or right toe-in S = Straight
• Easy to maintain – Note: “S” Beam Orientation not certified under FAA
no sealant required for prism
or feed-through assembly replacement
• Pressure test plug for seal integrity
verification
• Long Lamp Life –
Quartz Halogen, 48 W

www.chalp.com
1.4
 Outline Drawings 11.94 (303) DIA
.25
OPTICAL (6)
LENS
Dimensions: inches HOUSING
(mm)
Instruction Manual: 2404
.75
Shipping Weight: 16.0 lbs (19)
7.3 kg
2.56
(65)
Shipping Volume: 0.7 cu ft
0.02 m3 INNER
COVER GASKET

LAMP BRACKET ASSEMBLY

Typical Photometric Data INNER COVER

5,000 CD AVERAGE REQUIRED 5,000 CD AVERAGE REQUIRED

(ACTUAL AVERAGE–5,763 CD SHOWN) (ACTUAL AVERAGE–6,290 CD SHOWN)
2,500 CD MINIMUM REQUIRED 2,500 CD MINIMUM REQUIRED
500 CD MINIMUM REQUIRED 500 CD MINIMUM REQUIRED

12 12
5000 CD 5000 CD
VERTICAL ANGLE

VERTICAL ANGLE
8 8

2500 CD 2500 CD
4 4

0 0
-15 -10 -5 0 5 10 15 -10 -5 0 5 10 15
HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELA CD = CANDELA
L-850A Runway Centerline Light L-850B Touchdown Zone Light
2,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE–3,285 CD SHOWN)
1,000 CD MINIMUM REQUIRED 200 CD MIN. REQUIRED
100 CD MIN.
14 200 CD

375 CD
VERTICAL ANGLE

10
2000 CD

Runway and Taxiway Inset Lights

2

CD = CANDELA
-10 -5 0 5 10
HORIZONTAL ANGLE 1000 CD MIN.
2000 CD MIN. AVG
Rapid Exit Taxiway Indicator Light

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I, 24˝ Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D.
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-R Lens Replacement Kit – Red 10048-25 Gasket Lubricant – 5.3 oz Container
21140 Gasket – Bottom Cover

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 5
 PRO III ™ AIRPORT LIGHTING PRODUCTS

RCLI/TDZI
Runway Centerline Light,
Touchdown Zone Light or
Rapid Exit Taxiway Indicator Light
– ICAO
Compliances: ICAO Annex 14: Fig. A2-5, A2-6 and A2-7
Transport Canada Specification K 271: Fig B5 and B8 RCLI/TDZI
Applications Ordering Information
The RCLI/TDZI light does triple
duty as a runway centerline light, 8 5 0 3 – – 8 – –
a touchdown zone light, or as a
rapid exit taxiway indicator light.
The RCLI is a bidirectional light, Fixture Type:
typically clear/clear or clear/red, A=R  unway centerlinelight or
with two 48 W lamps. The TDZI is a Rapid Exit Taxiway Light
clear unidirectional light, with a 48 W B = Touchdown zone
lamp. RCLI /TDZI may be used for any light
category ICAO, or military runway.
Features Color:
CC = Clear/Clear (850A3)
• ETL Tested and Verified CR = Clear/Red (850A3)
• Low Profile, < .25” (6mm) – YX = Yellow/Blank (850A3)*
FAA Style 3 C = Clear (850B3)
• Low Power Consumption CX = Clear/Blank (850B3)*
GG = Green/Green (850A3)
• Few Parts to Stock GX = Green/Blank(850A3)*
• Beam Orientation can be easily
changed to left or right toe-in 8-Inch Diameter ICAO Fixture:
• Easy to maintain –
no sealant required for prism L-823 Plug Connection:
or feed-through assembly replacement P1 = One plug
P2 = Two plugs (850A3 only)
• Pressure test plug for seal integrity
verification Beam Orientation (850B3 only):
• Long Lamp Life – L = Left Toe-in
Quartz Halogen, 48 W R = Right Toe-in
• High-strength forged aluminum S = Straight
• Standard sealing gasket * Blank color units will have a threaded plug installed
(blank is not considered a color).

www.chalp.com
1.6
 7.94
(202)

LENS LENS OPTICAL

Outline Drawing gasket HOUSING .25
(6.35)

Dimensions: inches
(mm) .61
Instruction Manual: 2003 (15.4)
gasket for shallow
Shipping Weight: 5.0 lbs base mounting
2.66
2.3 kg (67.5)

Shipping Volume: 0.7 cu ft

0.02 m3
LAMP BRACKET INNER COVER
ASSEMBLY 6.406
(162.7)
Typical Photometric Data
5,000 CD AVERAGE REQUIRED 5,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE–5,763 CD SHOWN) (ACTUAL AVERAGE–6,290 CD SHOWN)
2,500 CD MINIMUM REQUIRED 2,500 CD MINIMUM REQUIRED
500 CD MINIMUM REQUIRED 500 CD MINIMUM REQUIRED

12 12
5000 CD 5000 CD
VERTICAL ANGLE

VERTICAL ANGLE
8 8

2500 CD 2500 CD
4 4

0 0
-15 -10 -5 0 5 10 15 -10 -5 0 5 10 15
HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELA CD = CANDELA
Runway Centerline Light (Fig. 2.7) Touchdown Zone Light (Fig. 2.5)
2,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE–3,285 CD SHOWN)
1,000 CD MINIMUM REQUIRED 200 CD MIN. REQUIRED
100 CD MIN.
14 200 CD

375 CD
VERTICAL ANGLE

10
2000 CD

Runway and Taxiway Inset Lights

2 Rapid Exit Taxiway Indicator Light (Fig. 2.7)
CD = CANDELA
-10 -5 0 5 10
HORIZONTAL ANGLE 1000 CD MIN.
Accessories 2000 CD MIN. AVG

Catalog Number Item Description Catalog Number Item Description

21388-1 Shallow Base – One Connector 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
21388-2 Shallow Base – Two Connectors 10047-2154 Heat Shrink Kit – 1 Piece
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33004 Isolation Transformer – 100 W, 6.6/6.6 A
33005 Isolation Transformer – 100 W, 20/6.6 A

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-R Lens Replacement Kit – Red 10048-25 Gasket Lubricant – 5.3 oz Container
21126-Y Lens Replacement Kit – Yellow 10035-62 O-Ring – Bottom Cover
21126-G Lens Replacement Kit – Green 21180 Gasket – Shallow Base

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 7
 PRO III ™ AIRPORT LIGHTING PRODUCTS

IREL
Inset Runway Edge Light
Compliances: FAA AC 150/5345-46: L-850C
ICAO Annex 14: Fig. A2-9
Transport Canada Specification TP 312: Fig. B1.10
UFC 3-535-01 IREL
Applications Ordering Information
The IREL is a high intensity
bidirectional light (using four 48 watt
8 5 0 C 3 – –
lamps.) This fixture is used where
taxiways intersect the runway and
any other runway edge locations Fixture Type:
where it is impractical to use an
elevated light. Color* :
CC = Clear/Clear
Features CY = Clear/Yellow
• ETL Certified YC = Yellow/Clear
CR = Clear/Red
• Low profile, < .25” (6mm) – RC = Red/Clear
FAA Style 3 YR = Yellow/Red
• Low power consumption RY = Red/Yellow
• Few parts to stock CX = Clear/Blank
XC = Blank/Clear
• Beam orientation can be easily changed YX = Yellow/Blank
to left or right toe-in XY = Blank/Yellow
• Easy to maintain – RX = Red/Blank
no sealant required for prism XR = Blank/Red
or feed-through assembly replacement GY = Green/Yellow
• Pressure test plug for seal integrity YG = Yellow/Green
verification
L-823 Plug Connection:
• Long Lamp Life – P1 = One plug
Quartz Halogen, 48 W, 6.6A P2 = Two plugs ­( Two color units only. Blank is not considered a color.)
• High-strength forged aluminum

* Refer to the color symbol position:

The first color is left toe-in;
The second color is right toe-in.

Runway
Centerline

Left Right
Toe-in Toe-in

www.chalp.com
1.8
 Outline Drawing 11.94 (303) DIA
.25
OPTICAL (6)
LENS HOUSING

Dimensions: inches
(mm) .75
(19)
Instruction Manual: 9929
2.56
Shipping Weight: 16.0 lbs. (65)
7.3 kg INNER
COVER GASKET
Shipping Volume: 0.7 cu. ft.
0.02 m3
LAMP BRACKET ASSEMBLY

INNER COVER

Typical Photometric Data

10,000 CD AVERAGE REQUIRED 5,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE = 12,022 CD SHOWN) (ACTUAL AVERAGE = 7,144 CD SHOWN)
5,000 CD MINIMUM REQUIRED 2,500 CD MINIMUM REQUIRED
1,000 CD MINIMUM REQUIRED 500 CD MINIMUM REQUIRED
12 12

8 8
VERTICAL ANGLE

4
5,000 CD VERTICAL ANGLE 2,500 CD
4
10,000 CD 5,000 CD

0 0

-15 -10 -5 0 5 10 15 -15 -10 -5 0 5 10 15

HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELAS (WHITE LIGHT) CD = CANDELAS (YELLOW LIGHT)

L-850C Inset Runway Edge Light – White L-850C Inset Runway Edge Light – Yellow

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24” Deep* 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33006 Isolation Transformer – 200 W, 6.6/6.6 A 19999 Lifting Tool

Runway and Taxiway Inset Lights

33007 Isolation Transformer – 200 W, 20/6.6 A 21151 Adapter Ring – 15” L-868C Base (11.25” bolt
circle to 14.25” bolt circle)

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 21140 Gasket – Bottom Cover

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-Y Lens Replacement Kit – Yellow 10048-25 Gasket Lubricant – 5.3 oz. Container
21126-R Lens Replacement Kit – Red

* Fixture with total lamp wattage greater than 150W should not be mounted on 12 inch diameter bases less than
20 inches (500mm) deep.
Class II bases are not recommended for this application.
Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 9
 PRO III
AIRPORT LIGHTING PRODUCTS
™

IRELI
Inset Runway Edge Light - ICAO
Compliances: ICAO Annex 14: Fig. A2.10 IRELI
Applications Ordering Information
The IRELI is a high intensity 8 5 0 6 – – –
bidirectional light (using two 105 watt
lamps) or unidirectional light (using
one 105 watt lamp). This fixture is Fixture Type:
used where taxiways intersect the 850 = Runway
runway and any other runway edge 6 = Model 6
locations where it is impractical to use
an elevated light. C-H Style:
Features A = ICAO Fig. A2.10

• Low profile, .50” (12 mm) Color:

• Few parts to stock CC = Clear
CY = Clear/Yellow
• Easy to maintain –
YC = Yellow/Clear
no sealant required for prism
YX = Yellow/Blank
• Pressure test plug for seal integrity XY = Blank/Yellow
verification CX = Clear/Blank
XC = Blank/Clear
• Long lamp life –
Quartz Halogen, 105 W, 6.6 A
L-823 Connection:
P1 = One plug
Instruction Manual: 2707 P2 = Two plugs
Shipping Weight: 17.0 lbs
7.7 kg
* Refer to the color symbol position:
Shipping Volume: 0.6 cu ft The first color is left toe-in;
0.04 m3 The second color is right toe-in.

Runway
Centerline

Left Right
Toe-in Toe-in

www.chalp.com
1 . 10
Fixture Type 8506A - 105 Watt MR-16 Lamp
Function: ICAO Fig. 2.10
500 CD MIN.
1000 CD MIN.
5000 CD MIN.

13

10
500

1,000
VERTICAL ANGLE

5 5.000

10,000

-12 -8 -4 0 4 8 12
FIXTURE P/N 8506A-CY-P1 HORIZONTAL ANGLE
ICAO FIGURE 2.10, CLEAR
MAIN BEAM MINIMUM = 6,298 CD
MAIN BEAM MAXIMUM = 15,886 CD
MAIN BEAM AVERAGE = 11,352 CD
MAX/MIN RATIO: 2.52
105 WATTS

Fixture Type 8506A - 105 Watt MR-16 Lamp

Function: ICAO Fig. 2.10, yellow
200 CD MIN.
400 CD MIN.
400 200 2000 CD MIN.

13

Runway and Taxiway Inset Lights

2,000

10
VERTICAL ANGLE

4.000

-12 -8 -4 0 4 8 12
FIXTURE P/N 8506A-CY-P1 HORIZONTAL ANGLE
ICAO FIGURE 2.10, YELLOW
MAIN BEAM MINIMUM = 3,847 CD
MAIN BEAM MAXIMUM = 8,268 CD
MAIN BEAM AVERAGE = 6333 CD
MAX/MIN RATIO: 2.15
105 WATTS

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 11
 Outline Drawing AIRPORT LIGHTING PRODUCTS

Lens
Lens Lamp
O-Ring Gasket
0.5 (12)
1.25
(32)

0.75
(19)

5.68
(144)

11.94 (303)

Dimensions: inches
(mm)

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24” Deep* 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33006 Isolation Transformer – 200 W, 6.6/6.6 A 19999 Lifting Tool
33007 Isolation Transformer – 200 W, 20/6.6 A

Renewal Parts
Part Number Description Part Number Description

21128 Lamp – 105 W, 6.6 A 10035-33-273 O-Ring – Bottom Cover

21321-C Lens Replacement Kit – White
21321-Y Lens Replacement Kit – Yellow

* Fixture with total lamp wattage greater than 150W should not be mounted on 12” diameter bases less than 20 inches (500mm) deep.
Class II bases are not recommended for this application.

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

www.chalp.com
1 . 12
Notes

Runway and Taxiway Inset Lights

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 13
 PRO III ™ AIRPORT LIGHTING PRODUCTS

IRTEL
Inset Runway
Threshold/End Light
Compliances: FAA AC 150/5345-46: L-850D IRTEL
Applications Ordering Information
The IRTEL is a medium intensity
bidirectional light (using two 48 W 8 5 0 D 3 – –
lamps for the green side and two
62 watt lamps for the red side). This
fixture is used on runways where Fixture Type:
the threshold and end lighting are
co-located and where it is impractical Color*:
to use an elevated light. RG = Red/Green
GR = Green/Red
Features GX = Green/Blank
• ETL Certified
XG = Blank/Green
RX = Red/Blank
• Low profile, < .25” (6mm) –
FAA Style 3 L-823 Plug Connection:
• Low power consumption P1 = One plug
• Few parts to stock
P2 = Two plugs ­­( Two color units only. Blank is not considered a color.)
• Beam orientation can be easily
changed to left or right toe-in,
(green only)
• Easy to maintain –
no sealant required for prism
or feed-through assembly replacement
• Pressure test plug for seal integrity * Refer to the color symbol position:
verification the red beam is always straight.
RG means right toe-in of the green beam.
• Long lamp life – GR means left toe-in of the green beam.
Quartz Halogen, 48 W, 6.6 A GX means right toe-in of the green beam.
Quartz Halogen, 62 W, 6.6 A XG means left toe-in of the green beam.

• High-strength forged aluminum

Red Red
Straight Straight

Runway
Centerline

Green Green
Left Right
Toe-in Toe-in

www.chalp.com
1 . 14
 Outline Drawing 11.94 (303) DIA
.25
OPTICAL (6)
LENS HOUSING

Dimensions: inches
(mm)
.75
Instruction Manual: 9929 (19)

Shipping Weight: 17.7 lbs 2.56
8.1 kg (65)
INNER
Shipping Volume: 0.7 cu ft COVER GASKET
0.02 m3
LAMP BRACKET ASSEMBLY

INNER COVER
Typical Photometric Data
3,300 CD AVERAGE REQUIRED
(ACTUAL AVERAGE = 5,716 CD SHOWN)
1,650 CD MINIMUM REQUIRED

2,500 CD AVERAGE REQUIRED

(ACTUAL AVERAGE = 2,903 CD SHOWN)
1,250 CD MINIMUM REQUIRED
12
3,300 CD 250 CD MINIMUM REQUIRED
5,000 CD
9
VERTICAL ANGLE

VERTICAL ANGLE
1,250 CD
6
2,500 CD
4
3

0 0
-15 -10 -5 0 5 10 15 -15 -10 -5 0 5 10 15
HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELAS (GREEN LIGHT) CD = CANDELAS (RED LIGHT)

L-850D Inset Runway Threshold/End Light – Green L-850D Inset Runway Threshold/End Light – Red
Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24” Deep* 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33006 Isolation Transformer – 200 W, 6.6/6.6 A 19999 Lifting Tool
33007 Isolation Transformer – 200 W, 20/6.6 A 21151 Adapter Ring – 15” L-868D Base (11.25” bolt

Runway and Taxiway Inset Lights

circle to 14.25” bolt circle)

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 10035-33-269 Gasket – Bottom Cover

21169 Lamp – 62 W, 6.6 A 10048-25 Gasket Lubricant – 5.3 oz. Container
21126-G Lens Replacement Kit – Green
21126-R Lens Replacement Kit – Red

* Fixture with total lamp wattage greater than 150 W should not be mounted on 12” diameter base less than 20” deep.
Class II bases are not recommended for this application.
Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 15
 RTEL
AIRPORT LIGHTING PRODUCTS

Runway Threshold
and End Light
Compliances: FAA AC 150/5345-46: L-850D
ICAO Annex 14
UFC 3-535-01 RTEL
Applications Ordering Information
The RTEL is a high intensity How to Order: Select the number Example: An 850D2-C-185-RG is a
bidirectional light used on of leads to match the number of bidirectional threshold and end light
runways where the threshold isolation transformers to be used. with right toe-in on the green beam
and end lighting are co-located. Choose the letter to match the base and a straight red beam. It mounts
The green threshold light’s main size to be installed. Add designations on a 14.25-inch bolt circle base. This
beam may be straight or toed-in for the lamp wattage and colors. fixture is furnished with two 185 watt
3.5 degrees. The red runway end The orientation of the color symbols lamps. It has two leads for making
light has a straight beam. The two determines the optical beam toe-in. connections with two 200 watt
lamps are typically connected to isolation transformers.
separate circuits with the red side
operated by the runway edge
lighting circuit. 8 5 0 D – – – – –
Features FixtureType:
• ETL Certified
Number of Leads:
• FAA Approved L-850D
1 or 2 with L-823 plugs
• Proven reliability
• Variety of mounting methods Base Size:
B = 11.25-inch bolt circle
• Optional high-strength casting —
C = 14.25-inch bolt circle
double the tensile strength of
ductile iron
Lamp Wattage:
• Optional metallic-ceramic 185 = 2 x 185 W lamps
coating for increased
corrosion resistance Color/Color**:
G = Green/Clear
Application Notes R = Red/Blank
• Sectional Class I bases may be
required for proper installation. Beam Orientation:
S = Straight beams both sides
• Size B fixtures require that the
No symbol means there is toe-in**
bases be installed with any two
opposite mounting bolt holes
Options:
parallel to the runway centerline.
NM = High-Strength Casting
CR = Corrosion Resistant Coating

** Refer to the color symbol position: Red Red

The red beam is always straight.
The first color is left toe-in; Runway
Centerline
The second color is right toe-in.

Green Green
Left Right
Toe-in Toe-in

www.chalp.com
1 . 16
Installation Drawings RTEL-850D1-B
11.95 .75
(304) (19)

Dimensions: inches
(mm) 1.25
(32)
Instruction Manual: 8401

Size B Size C
Shipping 55.0 lbs. 90.0 lbs.
Weight: 25.0 kg 41.0 kg
11.25*
Shipping 0.75 cu. ft. 1.00 cu. ft. (286)
Volume: .021 m3 0.32 m3
RTEL-850D1-C
Photometric Data: Contact Field Services 1.00
17.25
(438) (25)

1.25
(32)

14.25*
(362)

* Diameter for six (6) equally spaced bolts.

Accessories
Catalog Shipping Weight Shipping Volume
Number Item Description Lbs. kg Cu. Ft. m3

AC24242Q200303 Base: L-868B, Class I, 24” Deep 63.0 28.6 2.5 .070
AC35242Q200303 Base: L-868C, Class I, 24” Deep 78.0 35.4 3.0 .085
20452-S234 Base: Shallow, Size B (for one lead RTEL) 25.0 11.3 0.8 .022
20452-S234A Base: Shallow, Size B (for two lead RTEL) 25.0 11.3 0.8 .022
33004 Transformer L-830-4, 100 W 6.6/6.6 A 12.0 5.4 0.4 .011
33006 Transformer L-830-6, 200 W 6.6/6.6 A 16.0 7.3 0.4 .011
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.
10047-1425 Heat Shrink Kit

Renewal Parts
Part Number Description Part Number Description

20496 Lamp 115 W 20253 Bottom Cover Assembly (2 Leads)

Runway and Taxiway Inset Lights

20538 Lamp 185 W 20257 Bottom Cover Assembly (1 Lead)
20268 Lamp 200 W 10047-409 Film Disc Cutout
20073-Y Filter Assembly, Yellow
20073-BR Filter Assembly, Red FAA Base Size C Only:
20073-BG Filter Assembly, Green
20148 Reflector 20261-XXX-XX* Optical Assembly: 2 Leads
10035-33-274 O-Ring 20266-XXX-XX* Optical Assembly: 1 Lead
10035-33-010 O-Ring 20183 Mounting Ring
21038 Lead Assembly 10000-365M Bolt
19095 Socket 11A11-031D Lock Washer
19096 Socket Holder *Add lamp wattage and colors

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 17
 PRO III ™ AIRPORT LIGHTING PRODUCTS

IRTL
Inset Runway
Threshold Light
Compliances: FAA AC 150/5345-46: L-850E
IRTL
Applications Ordering Information
The IRTL is a medium intensity
unidirectional light (using two
62 W lamps). This fixture is used 8 5 0 E 3 – G
on runways where the threshold
lighting is co-located and where it is
impractical to use an elevated light.
Features Fixture Type:
• ETL Certified
Color:
• Low profile, < .25” (6mm) – G = Green (Straight beam)*
FAA Style 3
• Low power consumption * For fixtures which require toe-in or other color, please consult factory.

• Few parts to stock

• Easy to maintain –
no sealant required for prism
or feed-through assembly replacement
• Pressure test plug for seal integrity
verification
• Long lamp life –
Quartz Halogen, 62 W, 6.6 A
• High-strength forged aluminum

Outline Drawing
11.94 (303) DIA
OPTICAL
Dimensions: inches HOUSING .25
(mm) (6)
LENS
Instruction Manual: 9929

Shipping Weight: 16.0 lbs.
7.3 kg
.75
(19)
Shipping Volume: 0.7 cu. ft.
0.02 m3 2.56
(65)
INNER
COVER GASKET

LAMP BRACKET ASSEMBLY

INNER COVER

www.chalp.com
1 . 18
Typical Photometric Data
5,000 CD MINIMUM REQUIRED
(ACTUAL MINIMUM = 5,462 CD SHOWN)

10 5,000 CD
VERTICAL ANGLE

-15 -10 -5 0 5 10 15
HORIZONTAL ANGLE
CD = CANDELAS (GREEN LIGHT)

L-850E Inset Runway Threshold Light – Green

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
19999 Lifting Tool 21151 Adapter Ring – 15” L-868D Base (11.25” bolt
circle to 14.25” bolt circle)

Renewal Parts
Part Number Description Part Number Description

21169 Lamp – 62 W, 6.6 A 21122 Feed-through Assembly – 1 Lamp, 1 Connector

21126-G Lens Replacement Kit – Green 10048-25 Gasket Lubricant – 5.3 oz. Container
21140 Gasket – Bottom Cover

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Runway and Taxiway Inset Lights

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 19
 ATL
AIRPORT LIGHTING PRODUCTS

Approach Threshold Light

Compliances: FAA AC 150/5345-46: L-850E
ICAO Annex 14
USAF Regulation 88-14
USN NAVAIR 51-50AAA-2
NATO STANAG 3316 ATL
Applications Ordering Information
The ATL is a high intensity How to Order: To the basic catalog Example: An 850E1-B-185-G-L is a
unidirectional inset runway threshold number, add the letter to match unidirectional threshold light with left
light. This light is typically used as a the base size to be installed. Add beam toe-in using a 185 watt lamp.
green threshold light with a 185 watt designations for the lamp wattage and It mounts on an 11.25-inch bolt circle
lamp. The main beam may be straight color. Complete the catalog number base. There is one lead to plug into a
or toed-in 3.5 degrees toward the with a symbol to determine the optical 200 watt isolation transformer.
runway centerline. The ATL may be beam toe-in.
used as a red end of runway light and
as a red stopbar light.

Features 8 5 0 E 1 — — — — —
• Proven reliability
Fixture Type:
• Variety of mounting methods
• Optional high strength casting — Number of Leads:
double the tensile strength of
ductile iron Base Size:
• Optional metallic-ceramic coating B = 11.25-Inch Bolt Circle
for increased corrosion resistance C = 14.25-Inch Bolt Circle

Application Notes Lamp Wattage:

115 = 115W
• Sectional Class I bases may be 185 = 185W
required for proper installation. 200 = 200W
• Size C ATL will also mount on a
FAA-L867D base for special applications. Color/Color*:
• Size B fixtures require that the
C = Clear
bases be installed with any two
G = Green
opposite mounting bolt holes
R = Red
parallel to the runway centerline.
Y = Yellow

Beam Orientation:
L = Left Toe-in
R = Right Toe-in
S = Straight

Options:
NM = High Strength Casting
CR = Corrosion Resistant Coating Beam Orientation

* Use 115 watts for VFR Runway

approaches only. Use 185 Centerline
watts for all red lights and
precision approaches.
Left Right
Toe-in Toe-in

www.chalp.com
1 . 20
Installation Drawings ATL-850E1-B
11.95 .75
(304) (19)
Dimensions: inches
(mm)
Instruction Manual: 8401
1.25
(32)
Size B Size C
Shipping 55.0 lbs. 90.0 lbs.
Weight: 25.0 kg 41.0 kg

Shipping 0.75 cu.ft. 1.00 cu.ft.

Volume: .021 cu. .032 cu.m.
11.25*
(286)
Photometric Data: Contact Field Services
ATL-850E1-C
17.25 1.00
(438) (25)

1.25
(32)

14.25*
(362)

* Diameter for six (6) equally spaced bolts.

Accessories
Catalog Shipping Weight Shipping Volume
Number Item Description Lbs. Kg Cu.Ft. Cu.M.

AC24242Q200303 Base: L-868B, Class I, 24” Deep 63.0 28.6 2.5 .070
AC35242Q200303 Base: L-868C, Class I, 24” Deep 78.0 35.4 3.0 .085
AC63242Q200303 Base: L-867D, Class I, 24” Deep 67.0 30.4 4.3 .122
20452-S234 Base: Shallow, Size B 25.0 11.3 0.8 .022
33004 Transformer L-830-4, 100W 6.6/6.6A 12.0 5.4 0.4 .011
33006 Transformer L-830-6, 200W 6.6/6.6A 16.0 7.3 0.4 .011
33200 Transformer 200W 240V/30V for FAA MALS 16.0 7.3 0.4 .011
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to 43” O.D.
10047-1425 Heat Shrink Kit

Renewal Parts

Runway and Taxiway Inset Lights

Part Number Description Part Number Description

20496 Lamp 115W 19095-1 Socket

20538 Lamp 185W 19096 Socket Holder
20268 Lamp 200W 20462-2 Bottom Cover Assembly
20073-Y Filter Assembly — Yellow 10047-409 Film Disc Cutout
20073-R Filter Assembly — Red DICHROIC
20073-G Filter Assembly — Green DICHROIC FAA Base Size C Only:
20148 Reflector
10035-33-274 O-Ring 20483-XXX-X-X* Optical Assembly
10035-33-010 O-Ring 20481 Mounting ring
21038 Lead Assembly
*Add lamp wattage, color, and beam orientation

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 21
 PRO III ™ AIRPORT LIGHTING PRODUCTS

LHS
Land and Hold Short Light
Compliances: FAA AC 150/5345-46: L-850F
LHS

Applications Ordering Information

The LHS is a high intensity
unidirectional light that uses two 8 5 0 F 3 –
48 watt lamps, one lamp as primary
and one as back-up. This fixture is
used as part of the Land and Hold Fixture Type:
Short system (LAHSO). The system
consists of six L-850F lights, a power L-823 Plug Connection:
and control unit (PCU), and a tower *P1 = One plug
control panel. **P2 = Two plugs ­
Features * Unit is furnished with one plug, two lamps and film disc cutout for
automatic switching to back-up lamp upon failure of primary lamp.
• ETL Certified ** Unit is furnished with two plugs and two lamps. Each lamp is powered
• Low profile, < .25” (6mm) – by a different circuit (only one circuit energized at a time).
FAA Style 3
• Redundant lamp unit with automatic
switch over to back-up lamp l-850f fixture

• Low power consumption

• Few parts to stock
• Easy to maintain – off on
back-up lamp primary lamp
no sealant required for prism
or feed-through assembly replacement
Normal Operation
• Pressure test plug for seal integrity
verification
• Long Lamp Life –
Quartz Halogen, 48 W, 6.6 A
• High-strength forged aluminum l-850f fixture

on off
back-up lamp primary lamp

Back-up Operation

www.chalp.com
1 . 22
Outline Drawing 11.94 (303) DIA
OPTICAL
.25
HOUSING
(6)
LENS

Dimensions: inches
(mm) .75
(19)
Instruction Manual: 9929
2.56
Shipping Weight: 16.0 lbs. (65)
7.3 kg INNER
COVER GASKET

Shipping Volume: 0.7 cu. ft.

0.02 m3
LAMP BRACKET ASSEMBLY

INNER COVER

Typical Photometric Data

5,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE = 6,158 CD SHOWN)
2,500 CD MINIMUM REQUIRED
500 CD MINIMUM REQUIRED

12

5,000 CD
vertical angle
VERTICAL ANGLE

2,500 CD
4

-15 -10 -5 0 5 10 15
HORIZONTAL ANGLE
CD = CANDELAS (WHITE LIGHT)
L-850F Land and Hold Short Light
Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece

Runway and Taxiway Inset Lights

33002 Isolation Transformer – 45 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
21238 Shallow Base – Aluminum 19999 Lifting Tool

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48 W, 6.6 A 21140 Gasket – Bottom Cover

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
10047-409 Film Disc Cutout 10048-25 Gasket Lubricant – 5.3 oz Container

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 23
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TCL
Taxiway Centerline Light
Compliances: FAA AC 150/5345-46: L-852 A, B and C
UFC 3-535-01
TCL
Applications Ordering Information
The TCL is a taxiway centerline light
that is used primarily as a ground 8 5 2 3 – – – –
traffic aid during periods of low
visibility to guide aircraft between Fixture Type:
the runway and the parking stand. A = L-852A (Narrow, Cat. II)
The TCL is often a bidirectional B = L-852B (Wide, Cat. II)
light (using two 32 W lamps), but it C = L-852C (Narrow, Cat. III)
also may be a unidirectional light
(using one 32 watt lamp) on certain Color Filters:
taxiways, such as high speed turnoffs. GX = Green/Blank YY = Yellow/Yellow
Features YX = Yellow/Blank GY = Green/Yellow
GG = Green/Green
• ETL Certified
• Low profile, < .25” (6 mm) – Fixture Diameter:
FAA Style 3 12F = Optical assembly with 12” FAA support ring
• Unique combination of high-strength NSR = Optical assembly without support ring
aluminum optical assembly and
ductile iron outer ring for snow plow L-823 Plug Connection:
protection P1 = One plug (Blank color units will have a threaded cap installed.)
P2 = Two plugs (Two color units only. Note: For this feature only,
• Low power consumption blank is not considered a color.)
• Few parts to stock
• Easy to maintain – Options:
no sealant required for prism G = External gasket between optical assembly and support ring
or feed-through assembly replacement (Note: Optical assemblies with external gasket
will only fit support rings marked “G” on top surface.)
• Pressure test plug for seal integrity
verification
• Long lamp life –
Quartz Halogen, 32 W, L-852

Outline Drawing

Dimensions: inches
(mm)
Instruction Manual: 9927

Shipping Weight: 23.0 lbs.
10.4 kg

Shipping Volume: 0.7 cu. ft.

0.02 m3

www.chalp.com
1 . 24
 Typical Photometric Data

20 CD AVERAGE REQUIRED
(ACTUAL AVERAGE – 251 CD SHOWN)
10 CD MINIMUM REQUIRED 20 CD AVERAGE REQUIRED
(ACTUAL AVERAGE – 199 CD SHOWN)
2 CD MINIMUM 10 CD MINIMUM REQUIRED
2 CD MINIMUM

12 12
VERTICAL ANGLE

VERTICAL ANGLE
8 8 100 CD
100 CD 200 CD
200 CD
4 4

0 0
-24 -16 -8 0 8 16 24 -36 -24 -12 0 12 24 36
HORIZONTAL ANGLE HORIZONTAL ANGLE
CD = CANDELAS (IN GREEN LIGHT) CD = CANDELAS (IN GREEN LIGHT)

FAA L-852A Narrow (Straight Section), CAT II FAA L-852B Wide (Curved Section), CAT II

200 CD AVERAGE
(ACTUAL AVERAGE – 1109 CD SHOWN)
100 CD MINIMUM REQUIRED
20 CD MINIMUM

24
VERTICAL ANGLE

16
750 CD
600 CD
8
500 CD

0
-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE
CD = CANDELAS (IN GREEN LIGHT)

FAA L-852C Narrow, (Straight Section), CAT III

Accessories
Catalog Number Item Description Catalog Number Item Description

Runway and Taxiway Inset Lights

AC24242H200303 Base: L-868B, Class I*, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33002 Isolation Transformer – 45 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33003 Isolation Transformer – 65 W, 6.6/6.6 A 19999 Lifting Tool (for outer ring)

* Sectional bases may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21127 Lamp – 32 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21116 Lamp – 48 W, 6.6 A 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-C Lens Replacement Kit – Clear 10048-25 Gasket Lubricant – 5.3 oz Container
21438-G Filter – Green, L852A 852X3-XX-NSR-XX Spare Optical Assembly
21438-Y Filter – Yellow, L852A 21180 External support ring gasket
21436-G Filter – Green, L852B
21436-Y Filter – Yellow, L852B
21133-G Filter – Green, L852C
21133-Y Filter – Yellow, L852C
21124* Gasket – Bottom Cover
10035-62* O-Ring – Bottom Cover

* See instruction manual (9927).

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 25
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TCL 6
Taxiway Centerline Light
Compliances: FAA AC 150/5345-46: L-852 D
UFC 3-535-01
TCL
Applications Ordering Information
The TCL is a taxiway centerline light
that is used primarily as a ground 8 5 2 D 6 – – – –
traffic aid during periods of low
visibility to guide aircraft between Fixture Type:
the runway and the parking stand. D = L-852D (Wide, Cat. III)
The TCL is often a bidirectional
light (using two 32 W lamps), but it Color Filters:
also may be a unidirectional light GX = Green/Blank GY = Green/Yellow
(using one 32 watt lamp) on certain YX = Yellow/Blank CG = Clear/Green
taxiways, such as high speed turnoffs. GG = Green/Green GC = Green/Clear
Features YY = Yellow/Yellow
• ETL Certified Fixture Diameter:
• Low profile, < .25” (6 mm) – 12F = Optical assembly with 12” FAA support ring
FAA Style 3 NSR = Optical assembly without support ring
• Unique combination of high-strength (See note 2; next page)
aluminum optical assembly and
ductile iron outer ring for snow plow L-823 Plug Connection:
protection P1 = One plug (Blank color units will have a threaded cap installed.)
P2 = Two plugs (Two color units only. Note: For this feature only,
• Low power consumption blank is not considered a color.)
• Few parts to stock
• Easy to maintain – Options:
no sealant required for prism G = External gasket between optical assembly and support ring
or feed-through assembly replacement (Note: Optical assemblies with external gasket
will only fit support rings marked “G” on top surface.)
• Pressure test plug for seal integrity
verification
• Long lamp life –
Quartz Halogen, 32 W

Outline Drawing

Dimensions: inches
(mm)
Instruction Manual: 2803

Shipping Weight: 23.0 lbs.
10.4 kg

Shipping Volume: 0.7 cu. ft.

0.02 m3

www.chalp.com
1 . 26
 Typical Photometric Data

100 CD AVERAGE REQUIRED

(ACTUAL AVERAGE – 244 CD SHOWN)
50 CD MINIMUM REQUIRED
10 CD MINIMUM

24
VERTICAL ANGLE

16

8 200 CD
100 CD
50 CD
0
-36 -24 -12 0 12 24 36
HORIZONTAL ANGLE
CD = CANDELAS (IN GREEN LIGHT)

FAA L-852D , Wide (Curved Section), CAT III

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I*, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33002 Isolation Transformer – 45 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33003 Isolation Transformer – 65 W, 6.6/6.6 A 19999 Lifting Tool (for outer ring)

* Sectional bases may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21127 Lamp – 32 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21130-G Filter – Green (wide) 10048-25 Gasket Lubricant – 5.3 oz Container
21130-Y Filter – Yellow (wide) 852X6-XX-NSR-XX Spare Optical Assembly
21124* Gasket – Bottom Cover 21180 External support ring gasket
10035-62* O-Ring – Bottom Cover

Runway and Taxiway Inset Lights

* See instruction manual (2803).
Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.
2. 852D6 fixtures and rings are not compatible with 852D3 fixtures and rings.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 27
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TCL
Taxiway Centerline Light-LED
Compliances: FAA AC 150/5345-46
FAA Engineering Brief 67 TCL LED 8˝
UFC 3-535-01 8” with12” Ring

Applications Ordering Information

The TCL LED 8˝ is a taxiway centerline
light that is used primarily as a 8 5 2 4 – 2 – – – –
ground traffic aid during periods
of low visibility to guide aircraft
between the runway and the parking Fixture Type:
stand. The TCL LED 8˝ is often a C = L-852C (Narrow, CAT III)
bidirectional light, but it also may D = L-852D (Wide, CAT III)
be a unidirectional light on certain
taxiways, such as high speed turnoffs. Color Filters:
GX = Green/Blank YY = Yellow/Yellow
Features YX = Yellow/Blank GY = Green/Yellow
• ETL Certified GG = Green/Green
• Low profile, < .25˝ (6 mm) –
FAA Style 3 Fixture Diameter:
12F = Optical assembly with 12˝ FAA support ring
• Unique combination of high-strength NSR = Optical assembly without support ring
aluminum optical assembly and
ductile iron outer ring for snow plow L-823 Plug Connection:
protection P1 = One plug
• Few parts to stock P2 = Two plugs (For bidirectional units only)
• Easy to maintain – no sealant required
for prism or feed-through assembly Options:
replacement 1 = Arctic Kit
G = External gasket between optical assembly and support ring
• Pressure test plug for seal integrity (Note: Optical assemblies with external gasket
verification will only fit support rings marked “G” on top surface.)
• Long life LED
Note: Blank unit optical housing supplied with (1) lens opening only.
• Direct Replacement on existing circuit 60 Hz Operation Only.
• Less than 20VA at highest step for a
bidirectional fixture.
Outline Drawing
• Complies with intensity curve
requirements for a 3 step circuit Support Ring
Optical Housing Lens Boot Lens Optical Housing
.25 (6)
O-Ring

.75 (19)

Dimensions: inches
(mm)
Instruction Manual: 2609 LED Module
2.5
(63)
Shipping Weight: 23.0 lbs. Inner Cover LED Power Supply
10.4 kg

Shipping Volume: 0.7 cu. ft. 11.94 (303) Dia.

0.02 m3

www.chalp.com
1 . 28
Typical Photometric Data:
12 12

180 95 95
230 205
8 8
Vertical Angle

Vertical Angle
285
260
230 150
180 150
4 4
260
285

205
95
0 0
-6 -4 -2 0 2 4 6 -6 -4 -2 0 2 4 6
Horizontal Angle Horizontal Angle

L-852C LED Green ISO Candela Plot / CD Avg: 251.65 / Max/Min: 2.32 L-852D LED Yellow ISO Candela Plot / CD Avg: 115.77 / Max/Min: 3.25

15 15
60
90 90 120
60
150

10 10
Vertical Angle

Vertical Angle
150 120
120
150
150 120
90
5 5
60

90

0 0 60
-40 -20 0 20 40 -40 -20 0 20 40
Horizontal Angle Horizontal Angle
L-852D LED Green ISO Candela Plot / CD Avg: 136.84 / Max/Min: 3.21 L-852D LED Yellow ISO Candela Plot / CD Avg: 115.77 / Max/Min: 3.25

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I*, 24˝ Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D.
33001 Isolation Transformer – 30/45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33003 Isolation Transformer – 65 W, 6.6/6.6 A 19999 Lifting Tool (for outer ring)

Runway and Taxiway Inset Lights

33004 Isolation Transformer – 100 W, 6.6/6.6 A

* Two-Piece can may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21126-C Lens Replacement Kit, L-852C 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21366 Lens Replacement Kit, L-852D 10035-62 O-ring
21317 LED Module, L-852D, Green
21318 LED Module, L-852D, Yellow
21354 LED Module, L-852C, Green
21355 LED Module, L-852C, Yellow

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 29
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TCL1
Taxiway Centerline Light -
Single Lamp
Compliances: FAA AC 150/5345-46: L-852 A, and C TCL1
ICAO Annex 14: Fig. A2-13 & A2-15
UFC 3-535-01
Applications Ordering Information
The TCL1 is a taxiway centerline light
that is used primarily as a ground 8 5 2 5 – – – P 1 –
traffic aid during periods of low
visibility to guide aircraft between the
runway and the parking stand. The
TCL1 is a single 45W lamp fixture that Fixture Type:
supplies the same performance as A = L-852A (Narrow, Cat. II)
our standard Pro III™ Fixture.  It is not C = L-852C (Narrow, Cat. III)
available with a blank side
(i.e. GX or YX) Color Filters:
YY = Yellow/Yellow
Features GY = Green/Yellow
• ETL Certified GG = Green/Green
• Low profile, < .25” (6 mm) –
FAA Style 3 Fixture Diameter:
12F = Optical assembly with 12” FAA support ring
• Unique combination of high-strength NSR = Optical assembly without support ring
aluminum optical assembly and
ductile iron outer ring for snow L-823 Plug Connection:
plow protection P1 = One plug (Blank color units will have a threaded cap installed.)
• Low power consumption
• Few parts to stock Option:
G = External gasket between optical assembly and support ring
• Easy to maintain – (Note: Optical assemblies with external gasket
no sealant required for prism will only fit support rings marked “G” on top surface.)
or feed-through assembly replacement
• Pressure test plug for seal integrity
verification
LENS BOOT OPTICAL HOUSING
LENS

Outline Drawing

Dimensions: inches
(mm)
Instruction Manual: 2410

Shipping Weight: 21.0 lbs.
9.5 kg
O-RING
Support Ring
Shipping Volume: 0.7 cu. ft.
0.02 m3
Inner Cover
Lamp
Reflector

www.chalp.com
1 . 30
Typical Photometric Data

12

75 CD

VERTICAL ANGLE
8

50 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE 2 CD MIN.
10 CD MIN.
20 CD AVG
FAA L-852A Narrow (Straight Section), CAT II

100 CD MIN.
20 CD MIN. 200 CD AVG

24

400 CD
VERTICAL ANGLE

16 200 CD

100 CD

-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE

FAA L-852C Narrow, (Straight Section), CAT III

Accessories

Runway and Taxiway Inset Lights

Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I*, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
10047-1425 Heat Shrink Kit – 2 Piece
19999 Lifting Tool (for outer ring)

* Sectional bases may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21126-G or Y Lens Replacement Kit – Green or Yellow 21122 Feed-through Assembly – 1 Lamp, 1 Connector
10048-25 Gasket Lubricant – 5.3 oz Container
852X3-XX-NSR-XX Spare Optical Assembly
10035-62 O-Ring
10047-2888 45W Lamp, 6.6A

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 31
 PRO III ™ AIRPORT LIGHTING PRODUCTS

FTCL
Taxiway Centerline Light
Compliances: FAA AC 150/5345-46: L-852 A, B and C FTCL
UFC 3-535-01

Applications Ordering Information

The FTCL is a taxiway centerline light –
that is used primarily as a ground
8 5 2 3 –
traffic aid during periods of low
visibility to guide aircraft between
the runway and the parking stand. Fixture Type:
The FTCL is often a bidirectional A = L-852A (Narrow, Cat. II)
light (using two 32 W lamps), but it B = L-852B (Wide, Cat. II)
also may be a unidirectional light C = L-852C (Narrow, Cat. III)
(using one 32 watt lamp) on certain D = L-852D (Wide, Cat. III)
taxiways, such as high speed turnoffs.
Color Filters:
Features GX = Green/Blank YY = Yellow/Yellow
• ETL Certified YX = Yellow/Blank GY = Green/Yellow
GG = Green/Green
• Low profile, < .25” (6 mm) –
FAA Style 3
L-823 Plug Connection:
• Low power consumption P1 = One plug (Blank color units will have a threaded cap installed.)
• Few parts to stock P2 = Two plugs (Two color units only. Note: For this feature only, blank
is not considered a color.)
• Easy to maintain –
no sealant required for prism
or feed-through assembly replacement
• Pressure test plug for seal integrity
verification
• Long lamp life –
Quartz Halogen, 32 W, L-852 A-D

Outline Drawing
11.94 (303) DIA .25
INNER LENS/
OPTICAL (6)
LENS FILTER LENS
Dimensions: inches HOUSING
(mm) BOOT

Shipping Weight: 16.0 lbs.

7.3 kg
.75
Instruction Manual: 2215 (19)
INNER
Shipping Volume: 0.7 cu. ft. COVER
GASKET 2.56
0.02 m3 (65)
LAMP BRACKET
ASSEMBLY

INNER COVER

www.chalp.com
1 . 32
 Typical Photometric Data

100 CD
12 12

200 CD

VERTICAL ANGLE
VERTICAL ANGLE

8 8 100 CD
200 CD

4 4

0 0
-24 -16 -8 0 8 16 24 -36 -24 -12 0 12 24 36
HORIZONTAL ANGLE 2 CD MIN.
20 CD AVERAGE REQUIRED 2 CD MIN. HORIZONTAL ANGLE 20 CD AVERAGE REQUIRED
L-852A, FAA, 32W, AVIATION GREEN (ACTUAL AVERAGE - 251 CD SHOWN) L-852B, FAA, 32W, AVIATION GREEN (ACTUAL AVERAGE 199 CD SHOWN)
10 CD MINIMUM REQUIRED 10 CD MINIMUM REQUIRED

FAA L-852A Narrow (Straight Section), CAT II FAA L-852B Wide (Curved Section), CAT II

100 CD AVERAGE REQUIRED

200 CD AVERAGE REQUIRED (ACTUAL AVERAGE - 244 CD SHOWN
(ACTUAL AVERAGE - 1109 CD SHOWN) 50 CD MINIMUN REQUIRED
20 CD MIN. 100 DC MINIMUM REQUIRED 10 CD MIN.

24 24
700 CD VERTICAL ANGLE
VERTICAL ANGLE

16 16
500 CD

8 8
100 CD
50 CD
0 0
-12 -8 -4 0 4 8 12 -36 -24 -12 0 12 24 36
HORIZONTAL ANGLE HORIZONTAL ANGLE
L-852C, FAA, 32W, AVIATION GREEN L-852D, FAA, 32W, AVIATION GREEN

FAA L-852C Narrow (Straight Section), CAT III FAA L-852D Wide (Curved Section), CAT III

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I*, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 30/45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece

Runway and Taxiway Inset Lights

33002 Isolation Transformer – 30/45 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33003 Isolation Transformer – 65 W, 6.6/6.6 A 19999 Lifting Tool
33004 Isolation Transformer - 100 W, 6.6/6.6A
33005 Isolation Transformer - 100 W, 20/6.6A

* Sectional bases may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21127 Lamp – 32 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit – Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21140 Gasket – Bottom Cover 10048-25 Gasket Lubricant – 5.3 oz Container
21436-G Filter Assembly, Green, L-852B
21436-Y Filter Assembly, Yellow, L-852B
21438-G Filter Assembly, Green, L-852A
21438-Y Filter Assembly, Yellow, L-852A
21133-G Filter-Green, L852C
21133-Y Filter-Yellow, L852C
L21130-G Filter-Green, L852D
L21130-Y Filter-Yellow, L852D

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 33
 TCLI
AIRPORT LIGHTING PRODUCTS

Taxiway Centerline Light - ICAO

Compliances: ICAO Annex 14: Fig. 2.12 thru 2.16

TCLI
Applications Ordering Information
The TCLI is a taxiway centerline light that is used
primarily as a ground traffic aid during periods 8 5 2 I – –
of low visibility to guide aircraft between the
runway and the parking stand. The TCLI is often Fixture Type:
a bidirectional light (using either one or two C2 = Curved Sections, CAT II, Fig. 2.16
tungsten-halogen lamps), but it also may be a C3 = Curved Sections, CAT III, Fig. 2.14*
unidirectional light (using one lamp). N3 = Narrow Beam, CAT III, Fig. 2.13*
For bidirectional operation, a bidirectional fixture W2 = Wide Beam, CAT II, Fig. 2.15
with one lamp (P1 Option) is the standard fixture W3 = Wide Beam, CAT III, Fig. 2.12*
used for full-time bidirectional fixture operation.
A bidirectional fixture with two lamps (P2 Option) Color Filters**:
is only used when the airfield circuitry provides XG = Blank/Green YY = Yellow/Yellow
for alternate switching of the lamps. GX = Green/Blank GY = Green/Yellow
XY = Blank/Yellow YG = Yellow/Green
Features YX = Yellow/Blank XR = Blank/Red
GG = Green/Green RX = Red/Blank
• ICAO Style 4, < 6 mm above grade
• High-strength aluminum housing L-823 Plug Connection:
P1 = One plug, One Lamp
• Low power consumption
P2 = Two plugs, Two Lamps
• Few parts to stock
• Easy to maintain — * Category 3 fixtures require two lamps.
** For fixture types C2 & C3, refer to the color filter designation: The first color is
no sealant required for prism or feed-through left toe-in; The second color is right toe-in.
assembly replacement
• Pressure test plug for seal integrity
Fixture Type Color
verification
• Long life 40W lamp C2, C3 G, Y
N3, W2, W3 G, Y, R
Outline Drawing Left Right
Toe-in Toe-in

Dimensions: Millimeters 203.0

LENS LENS BOOT OPTICAL HOUSING
6.0 GROUND LEVEL
Instruction Manual: 2620

Shipping Weight: 3kg 19.0

Shipping Volume: .01m3

105.0

O-Ring

LEAD ASSEMBLY BOTTOM COVER LAMP FILTER

www.chalp.com
1 . 34
 Typical Photometric Data:

200 100

13 10 CD 13 20 CD
MIN MIN
200
Vertical Angle

Vertical Angle
9 9

50 CD
MIN 100 CD
100 CD MIN
5 MIN AVG 5 200 CD
MIN AVG

1 1
400
-40 -32 -24 -16 -8 0 8 16 -6 -4 -2 0 2 4 6
Horizontal Angle Horizontal Angle
ICAO Figure 2.14, Curved Sections, CAT III ICAO Figure 2.13, Narrow Beam, CAT III
CD Avg: 165 CD Avg: 353
Max/Min: 2.5 Max/Min: 1.7

200 100

20 CD
13 MIN
Vertical Angle

9 100 CD
MIN
200 CD
AVG MIN
5

1
-18 -12 -6 0 6 12 18
Horizontal Angle
ICAO Figure 2.12, Wide Beam, CAT III
CD Avg: 245
Max/Min: 1.7
Accessories
Catalog Number Item Description Catalog Number Item Description

33001 Isolation Transformer — 30/45 W, 6.6/6.6 A 823KP-D4-D4 Connector Kit — L-823, 8 AWG, .32” to .43” O.D.
33002 Isolation Transformer — 30/45 W, 20/6.6 A 10047-2154 Heat Shrink Kit — 1 Piece
33004 Isolation Transformer - 100 W, 6.6/6.6A 10047-1425 Heat Shrink Kit — 2 Piece
33005 Isolation Transformer - 100 W, 20/6.6A 21390-1 Shallow Base - One Connector

Runway and Taxiway Inset Lights

21390-2 Shallow Base - Two Connectors

Renewal Parts
Catalog Number Item Description Catalog Number Item Description

87005 Lamp — 40 W, 6.6 A 87006-G Green Filter

87003 Lens, Straight (N3, W2, W3 fixtures) 87006-Y Yellow Filter
87031-1 Lens, Curved, Left (C2 & C3 fixtures) 87006-R Red Filter
87031-2 Lens, Curved, Right (C2 & C3 fixtures) 87014 Filter Boot
87015 Lens Boot (N3, W2, W3 fixtures) 10048-25 Gasket Lubricant, 5.3 oz.
87032 Lens Boot (C2 & C3 fixtures)
87016 Lens Gasket
87017 Isolator
87018 O-Ring

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 35
 PRO III ™ AIRPORT LIGHTING PRODUCTS

FTCLI
Taxiway Centerline Light - ICAO
Compliances: ICAO Annex 14: Fig. A2-12 through A2-16 FTCLI
Applications Ordering Information
The FTCLI is a taxiway centerline light
that is used primarily as a ground 8 5 2 3 – – –
traffic aid during periods of low
visibility to guide aircraft between Fixture Type:
the runway and the parking stand. C2 = Curved Sections, CAT II, Fig. 2.16
The FTCLI is often a bidirectional light C3 = Curved Sections, CAT III, Fig. 2.14
(using two MR-16 lamps), it may also N3 = Narrow Beam, CAT III, Fig. 2.13
be a unidirectional light (using one W2 = Wide Beam, CAT II, Fig. 2.15
MR-16 lamp). W3 = Wide Beam, CAT III, Fig. 2.12

Color Filters*:
XG = Blank/Green YY = Yellow/Yellow
Features GX = Green/Blank GY = Green/Yellow
XY = Blank/Yellow YG = Yellow/Green
• Low profile, < .25˝ (6 mm) –
YX = Yellow/Blank XR = Blank/Red
above grade
GG = Green/Green RX = Red/Blank
• High-strength forged aluminum
• Low power consumption L-823 Plug Connection:
P1 = One plug (Blank color units will have a threaded cap installed.)
• Few parts to stock
P2 = Two plugs (Two color units only. Note: For this feature only, blank is not
• Easy to maintain – considered a color.)
no sealant required for prism
or feed-through assembly replacement Option:
• Pressure test plug for seal integrity 1 = 48 watt lamp
verification
* For fixture types C2 & C3, refer Fixture Type Color Lamp Wattage
• Long life Quartz Halogen lamp to color designation: The first
color is left toe-in; second color C2, W2 G,Y,R 32W
is right toe-in.
W3, N3 G,Y 32W
N3 R 62W
C3 G,Y 32W
C3, W3 R 105W

Outline Drawing
Dimensions: inches
(mm) 11.94˝ (303) DIA.
Shipping Weight: 16.0 lbs. INNER LENS 0.25˝
7.3 kg FILTER OPTICAL LENS (6)
HOUSING BOOT
LENS
Instruction Manual: 2108
0.75˝ (19)
Shipping Volume: 0.7 cu. ft.
0.02 m3
2.56˝
INNER COVER (65)
GASKET
LAMP
BRACKET
ASSEMBLY INNER
COVER

www.chalp.com
1 . 36
Typical Photometric Data
200 100

10 CD
13 MIN 13 20 CD
MIN
200
VERTICAL ANGLE

VERTICAL ANGLE
9 9

50 CD
MIN 100 CD
100 CD MIN
5 5 200 CD
MIN AVG
AVG MIN

1 1
400
-40 -32 -24 -16 -8 0 8 16 -6 -4 -2 0 2 4 6
HORIZONTAL ANGLE HORIZONTAL ANGLE

ICAO Fig. 2.14, Curved Sections, CAT III / CD Avg: 165 / Max/Min: 2.5 ICAO Fig. 2.13, Narrow Beam, CAT III /CDAvg: 353 / Max/Min: 1.7

200 100

20 CD
13 MIN
VERTICAL ANGLE

9 100 CD
MIN
200 CD
AVG MIN
5

1
-18 -12 -6 0 6 12 18
HORIZONTAL ANGLE

ICAO Figure 2.12, Wide Beam, CAT III/ CD Avg:245/ Max/Min: 1.7

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L-868B, Class I*, 24” Deep 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32” to .43” O.D.
33001 Isolation Transformer – 30/45 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33002 Isolation Transformer – 30/45 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33003 Isolation Transformer – 65 W, 6.6/6.6 A 19999 Lifting Tool
33004 Isolation Transformer - 100 W, 6.6/6.6A

Runway and Taxiway Inset Lights

33005 Isolation Transformer - 100 W, 20/6.6A

* Sectional bases may be required depending upon the paving technique

Renewal Parts
Part Number Description Part Number Description

21127 Lamp – 32 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21116 Lamp – 48 W, 6.6 A 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21169 Lamp - 62 W, 6.6 A 21179-G Fresnel - Green
21128 Lamp - 105 W, 6.6 A 21179-Y Fresnel - Yellow
21126-C Lens Replacement Kit - Clear 21179-R Fresnel - Red
21140 Gasket - Bottom Cover 21228-G Fresnel with baffle - Green (N3)
10048-25 Gasket Lubricant - 5.3 oz. container 21228-Y Fresnel with baffle - Yellow (N3)
21228-R Fresnel with baffle - Red (N3)
Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 37
 PRO III ™ AIRPORT LIGHTING PRODUCTS

IRGL/ISBL
Inset Stop Bar and
Runway Guard Lights
Compliances: FAA AC 150/5345-46: L-852 G and S IRGL / ISBL
Applications Ordering Information
The IRGL and ISBL fixtures are used
for runway incursion protection and 8 5 2 3 – – –
traffic control on taxiways just before
active runways. They are required for
SMGCS operations during low visibility Fixture Type:
conditions as defined in FAA AC G = L-852G, Runway guard light
150/5340-30 and AC 120-57A. These S = L-852S, Stop bar light
unidirectional lights are designed for use
in all weather conditions with any kind Color Filters:
of control system including the Digitrac® Y = Yellow (L-852G only)
Control and Monitoring System. R = Red (L-852S only)
YX = Yellow/Blank*
Features RX = Red/Blank*
• ETL Certified
(L852G style fixture only) Fixture Diameter:
12F = Optical assembly with 12” FAA support ring
• Low profile, < .25” (6 mm) – FAA Style 3 NSR = Optical assembly without support ring
• Unique combination of high-strength
aluminum optical assembly and Option:
ductile iron outer ring for snow G = External gasket between optical assembly and support ring
plow protection (Note: Optical assemblies with external gasket
• Low power consumption will only fit support rings marked “G” on top surface.)
• Few parts to stock * Blank color units will have a threaded plug installed
• Easy to maintain – no sealant required (blank is not considered a color).
for prism or feed-through assembly
replacement
• Pressure test plug for seal
integrity verification
• Long lamp life – Outline Drawing
Quartz Halogen, 105 W
• Control and Monitoring – Fixture can be
supplied with a Crouse-Hinds Logitrac for
individual lamp control and monitoring as
required for flashing guard light operation
or stop bar control. Contact Crouse-Hinds
for more info

Dimensions: inches
(mm)
Instruction Manual: 9927

Shipping Weight: 23.0 lbs.
10.4 kg

Shipping Volume: 0.7 cu. ft.

0.02 m3

www.chalp.com
1 . 38
 Typical Photometric Data
100 CD MINIMUM REQUIRED 30 CD MINIMUM REQUIRED
1000 CD AVERAGE REQUIRED 300 CD AVERAGE REQUIRED
(ACTUAL AVERAGE = 1420 CD SHOWN) (ACTUAL AVERAGE = 416 CD SHOWN)
500 CD MINIMUM REQUIRED 150 CANDELA MINIMUM REQUIRED

12 12

500 CD

VERTICAL ANGLE
VERTICAL ANGLE

8 8

300 CD
1000 CD
4 4

150 CD
750 CD

0 0 30 CD

-36 -24 -12 0 12 24 36 -36 -24 -12 0 12 24 33 36

HORIZONTAL ANGLE CD = CANDELAS (YELLOW LIGHT) HORIZONTAL ANGLE CD = CANDELAS (RED LIGHT)

L-852G Runway Guard Light L-852S Stop Bar Light

Accessories

Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base L-868B, Class I*, 24” Deep 19999 Lifting Tool (for outer ring)
33004 Isolation Transformer – 100 W, 6.6/6.6 A T6540-02-01-00 Logitrac Device, L852s
33005 Isolation Transformer – 100 W, 20A/6.6 A T6540-01-01-00 Logitrac Device, L852g
823KP-D4 -D4 Connector Kit – L-823, 8AWG, .32” to .43” O.D.
10047-2154 Heat Shrink Kit – 1 piece
10047-1425 Heat Shrink Kit – 2 piece
* Sectional bases may be required depending upon the paving technique.

Renewal Parts
Part Number Description Part Number Description

21128 Lamp – 105 W, 6.6 A 21121 Feed-through Assembly – 2 Lamp, 1 Connector

21126-C Lens Replacement Kit - Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-R Lens Replacement Kit - Red 10048-25 Gasket Lubricant – 5.3 oz Container

Runway and Taxiway Inset Lights

21130-TY Fresnel Filter – Yellow 852X3-X-NSR Spare Optical Assembly
21130-TR Fresnel Filter – Red 21180 External support ring gasket
21124* Gasket – Bottom Cover
10035-62* O-Ring – Bottom Cover

* See instruction manual.

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 39
 PRO III ™ AIRPORT LIGHTING PRODUCTS

SBGL
Inset Stop Bar /
Runway Guard Light
Compliances: FAA AC 150/5345-46: L-852 G and L-852S SBGL
Applications Ordering Information
The SBGL fixtures are used for
8 5 2 G S 3 – –
runway incursion protection and
traffic control on taxiways just before
active runways. They are required for
SMGCS operations during low visibility
conditions as defined in FAA AC Fixture Type:
150/5340-30 and AC 120-57A. This GS = L-852/S, Stop bar/Runway guard light
unidirectional light is designed for use
in all weather conditions with any Color Filters:
kind of control system including the YR = Yellow (Left side)/Red (Right side)
Digitrac® Control and Monitoring YX = Yellow (Left side)/Blank (Right side)
System. XR = Blank (Left side)/Red (Right side)
Features L-852 Plug Connection:
• ETL Certified P1 = One Plug (One-color units only. Blank is not considered a color.)
• Low profile, < .25” (6 mm) –
P2 = Two Plugs (Two-color units only. Blank is not considered a color.)
FAA Style 3
• High-strength forged aluminum
• Low power consumption
• Few parts to stock
• Easy to maintain –
no sealant required for prism
or feed-through assembly replacement
Outline Drawing
• Pressure test plug for seal
integrity verification 11.94˝ (303) DIA.
• Long lamp life – Quartz Halogen, 105 W 0.25˝
OPTICAL (6)
• Control and Monitoring – Fixture can be HOUSING
supplied with a Crouse-Hinds Logitrac for LENS
individual lamp control and monitoring as 0.75˝
(19)
required for flashing guard light operation
or stop bar control. Contact Crouse-Hinds
for more info INNER COVER 2.56˝
GASKET (65)

LAMP
Dimensions: inches BRACKET
(mm) ASSEMBLY INNER
Instruction Manual: 2106 COVER

Shipping Weight: 16.0 lbs.
7.3 kg

Shipping Volume: 0.7 cu. ft.

0.02 m3

www.chalp.com
1 . 40
 Typical Photometric Data
100 CANDELA MINIMUM REQUIRED 30 CANDELA MINIMUM REQUIRED
1000 CANDELA AVERAGE REQUIRED 300 CANDELA AVERAGE REQUIRED
500 CANDELA MINIMUM REQUIRED 150 CANDELA MINIMUM REQUIRED
13
12

10

VERTICAL ANGLE
VERTICAL ANGLE

500 CD
8

300 CD
5
1000 CD
4

150 CD
1500 CD

0 0 30 CD

-36 -24 -12 0 12 24 36 -36 -24 -12 0 12 24 33 36

HORIZONTAL ANGLE HORIZONTAL ANGLE

L-852G Runway Guard Light-Yellow L-852S Stop Bar Light-Red

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base L-868B, Class I*, 24” Deep 19999 Lifting Tool (for outer ring)
33004 Isolation Transformer – 100 W, 6.6/6.6 A T6540-03-01-00 Logitrac Device, L852GS
33005 Isolation Transformer – 100 W, 20A/6.6 A T6540-02-01-00 Logitrac Device, L852s
823KP-D4 -D4 Connector Kit – L-823, 8AWG, .32” to .43” O.D. T6540-01-01-00 Logitrac Device, L852g
10047-2154 Heat Shrink Kit – 1 piece
10047-1425 Heat Shrink Kit – 2 piece

* Sectional bases may be required depending upon the paving technique.

Renewal Parts
Part Number Description Part Number Description

21128 Lamp – 105 W, 6.6 A 21140 Gasket - Bottom Cover

21126-C Lens Replacement Kit - Clear 21122 Feed-through Assembly – 1 Lamp, 1 Connector
21126-R Lens Replacement Kit - Red 10048-25 Gasket Lubricant – 5.3 oz Container
21130-TY Fresnel Filter – Yellow

Runway and Taxiway Inset Lights

21130-TR Fresnel Filter – Red

Note:
1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 41
 RCLN
AIRPORT LIGHTING PRODUCTS

Runway Centerline
Light – Navy
Compliances: U.S. Navy NAVAIR 51-50AAA-2 RCLN
Applications Ordering Information
Example: 18749-RC is a bidirectional
The RCLN has been designed to meet How to order: Select the basic catalog L-852N Type 5 light with red filter
the harsh environment of military number. Add suffixes for filter, lamp on one side and with the other side
runway centerline lighting where tail type and options (if any). clear. The lamp with film disc cutout is
hooks may be present. These lights furnished with this light.
come with an extra- strength stainless
steel base and thick top optical
assembly. The optical assembly houses
the lamp, filters and lenses required
to form the proper light beam. Lights
are available in four types for various
installation requirements.

Features Fixture Type:

18749 Type 5
• Removeable optical high-strength 20324 Type 6
ductile iron cartridge 20381 Type 7
• Variety of mounting choices. 20382 Type 8
• Hardened stainless steel base for
tail hook resistance. Filter Code:
C = Clear
• Zinc plating on stainless steel base
R = Red
for maximum corrosion resistance.
• Meets U.S. Navy requirements. Options:
• Optional metallic-ceramic coating for 65 = 65 W Lamp (45 W standard)
increased corrosion resistance. CR = Corrosion Resistant Coating (Optical Assembly only)
NF = Lamp Without Film Disc Cutout

Accessories
Catalog Shipping Weight Shipping Volume
Description Number Specification Lbs. Kg Cu.Ft. Cu.M.

Transformer, 30/45 W, 6.6/6.6 A 33001-2 MS27289-1 8.0 3.6 0.2 0.006

Transformer, 30/45 W, 6.6/6.6 A 33001 FAA L-830-1 8.0 3.6 0.2 0.006
Transformer, 65 W, 6.6/6.6 A 33003 FAA L-830-3 9.0 4.0 0.1 0.006
Connector Kit – Refer to data sheet ET-8.1
Type 7 Base, Size A, 10” diameter L-868 AC15242H200003** 43.0 20.0 2.1 0.06
Spacer Ring, 3/4” thick (10”) AF5102-12 6.0 2.7 0.043 0.001
Type 8 Base, Size B, 12” diameter L-868 AC24242H200003** 63.0 29.0 2.5 0.10
Spacer Ring, 3/4” thick (12”) AF5402-12 7.25 3.3 0.06 0.002

** Other bases, such as sectional type, may be required, depending on method of installation.

www.chalp.com
1 . 42
 Typical Photometric Data
125 CD MIN. 125 CD MIN.
250 CD AVG. 250 CD AVG.
25 CD MIN. 25 CD MIN.

12 12
VERTICAL ANGLE

VERTICAL ANGLE
125 CD
8 8
125
250 250 CD
500
400 CD
4 4

0 0

-12 -8 -4 0 4 8 12 -12 -8 -4 0 4 8 12
HORIZONTAL ANGLE HORIZONTAL ANGLE

RCLN – Clear Filter / CD AVG: 538 / MAX/AVG: 1.46 RCLN – Red Filter / CD AVG: 394 / MAX/AVG: 2.34

Dimensions: inches
(mm)
Instruction Manual: 8005

Shipping Weight: 12.0 lbs.

5.44 kg

Shipping Volume: .3 cu.ft.

.01 cu.m.

OutlineDrawings
Type 5 Type 6

8.0
(203)

Runway and Taxiway Inset Lights

Type 7* Type 8*

* For FAA shallow or deep base mounting.

Renewal Parts
Part Number Description Part Number Description

19899 Housing/Lens Assembly 85203-5-F Optical Base/Lamp Assembly

19241 Gasket 18448 Sleeve – Waterproofing
19848 Screw – High-Strength Mounting Blk. Oxide 19694 Socket Assembly
19463 Filter Spring 19695 O-Ring – Optical Assembly
20654-R Filter, Red 19313-3 Lead Assembly
19900-xx Optical Assembly (Add Colors) 20936-** Lamp assembly (45 W)
19484-** Lamp assembly (65 W)

** Insert “F” for lamp with film disc cutout (standard) or “NF” for lamp without film disc cutout (optional).

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 43
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TOL
Omnidirectional
Taxiway Light
Compliances: FAA AC 150/5345-46: L-852T & E
ICAO Annex 14
UFC 3-535-01
IEC 97/98A/DTS TOL3
Applications Ordering Information
The TOL is an inset taxiway edge and 8 5 2 3 –
taxiway intersection fixture. The TOL
is intended for use on a 6.6A constant
current circuit through an L-830
isolation transformer. Fixture Type:
Features
Color:
• ETL Certified T = Taxiway Edge (Omni-Directional Blue)
• Low profile, <.25˝ (6 mm) – E = Taxiway Intersection (Omni-Directional Yellow)
FAA Style 3
• High-strength aluminum
Fixture Diameter:
optical assembly
008 = 8˝ Fixture with mounting bolt pattern per IEC specifications
12A = 12˝ Fixture with 11.25˝ mounting BC
• Easy to maintain – no sealant required 12B = 12˝ Fixture with 10.25˝ mounting BC
for prism or feed-through assembly
replacement
• Pressure test plug Outline Drawing
for seal integrity verification
11.94 (303) DIA
• It is recommended that caution be used
during snowplow operations. Use of a Inner Lens Boot Inner Lens O-Ring
0.25
Gasket Outer Lens Optical Housing
rubber tipped blade is recommended. Outer Lens Boot Filter (6)
Fixture is not warranted against
0.75 (19)
snowplow damage.

Inner Cover

Dimensions: inches 4.00

(mm) (102)

Instruction Manual: 2528

Location of Feed-Thru
Assembly with L-823 Plug
Shipping Weight: 10.5 lbs (Not Shown)
4.8 kg
Lamp Assembly
Shipping Volume: 0.7 cu ft
0.02 m3

www.chalp.com
1 . 44
Typical Photometric Data
25 CD 2 CD .2 CD

90

60
4
CANDELA

CANDELA
30 2

0
0
0 4 8 12 16 20 24 28 0 4 8 12 16 20 24 28
VERTICAL ANGLE VERTICAL ANGLE

L-852E Taxiway Intersection Light L-852T Taxiway Edge Light

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L868B, Class 1, 24˝ Deep 823KP-D4-D4 Connector Kit – L823, 8 AWG
AC21242H200301 Base: L867B, Class 1, 24˝ Deep 10047-2154 Heat Shrink Kit – 1 Piece
33001 Isolation Transformer – 30/45W, 6.6/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
21431 8” Diameter Shallow Base – Aluminum
21238 12” Diameter Shallow Base – Aluminum

Renewal Parts
Part Number Description Part Number Description

21116 Lamp – 48W, 6.6A 10048-25 Gasket Lubricant – 5.3 oz. Container
21265 Bottom Cover Assembly 21122 Feed Through Assembly – 1 Lamp, 1 Connector
21335* Lamp Replacement Kit 21332** Outer Lens Replacement Kit
21257 Inner Lens Boot 21255 Inner Lens
21285-Y Absorption Filter – Aviation Yellow 10035-62 3/32˝ O-Ring, 6.25” I.D.
21285-B Absorption Filter – Aviation Blue

* Includes 20356 Rubber Grommet, 19143-2 Spacer, 21116 Lamp, 21294 Locking Spring and 21263 Bracket.
** Includes 21258 Gasket, 21256 Lens Boot and 21254 Outer Lens.

Runway and Taxiway Inset Lights

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 45
 PRO III ™ AIRPORT LIGHTING PRODUCTS

TOL-LED
Omnidirectional
Taxiway Edge Light
Compliances: FAA AC 150/5345-46: L-852T
ICAO Annex 14
UFC 3-535-01
IEC 97/98A/DTS
FAA Engineering Brief 67 TOL4
Applications Ordering Information
The TOL is an inset taxiway edge and 8 5 2 T 4 – –
taxiway intersection fixture. The TOL
is intended for use on a 6.6A constant
Fixture Type:
current circuit through an L-830
isolation transformer.
Color:
Features T = Taxiway Edge – LED (Omnidirectional Blue)
• ETL Certified
Fixture Diameter:
(852T4 @ 6.6A only)
008 = 8˝ Fixture with mounting bolt pattern per IEC specifications
• Low profile, <.25˝ (6 mm) – 12A = 12˝ Fixture with 11.25˝ mounting BC
FAA Style 3 12B = 12˝ Fixture with 10.25˝ mounting BC
• Low power consumption,
less than 8VA at highest step Options:
1 = Arctic Kit (not available with Options 2-4)
• High-strength aluminum
2 = 12 VDC Input* 3 = 24 VDC Input* 4 = 90-250 VAC, 50/60 Hz, Input*
optical assembly NOTE: 6.6A @ 60 Hz Only
• Easy to maintain – no sealant required
for prism or feed-through assembly
replacement
Outline Drawing
• Pressure test plug for seal integrity 11.94 (303) DIA
verification Gasket LED Module O-Ring 0.25
Outer Lens Boot Outer Lens Optical Housing (6)
• Long life LED
• Direct Replacement on 0.75 (19)
existing circuit
• Complies with intensity curve Inner Cover
requirements for a 3 step circuit (6.6A 2.75
input fixture only) (70)
Location of Feed-Thru
• It is recommended that caution be used Assembly with L-823 Plug
(Not Shown)
during snowplow operations. Use of a
rubber tipped blade is recommended. Power Supply
Dimensions: inches
Fixture is not warranted against (mm)
snowplow damage. Instruction Manual: 2529

Shipping Weight: 10.5 lbs

(4.8 kg)
* Mode 2 fixtures not defined by
FAA Advisory Circular Shipping Volume: 0.7 cu ft
(0.02 m3)

www.chalp.com
1 . 46
Typical Photometric Data
2 CD .2 CD

4
CANDELA

0 4 8 12 16 20 24 28

VERTICAL ANGLE

L-852T4 Taxiway Edge Light – LED

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242H200303 Base: L868B, Class 1, 24˝ Deep 823KP-D4-D4 Connector Kit – L823, 8 AWG
AC21242H200301 Base: L867B, Class 1, 24˝ Deep 10047-2154 Heat Shrink Kit – 1 Piece
33001 Isolation Transformer – 30/45W, 6.6/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
21431 8˝ Diameter Shallow Base – Aluminum 21238 12˝ Diameter Shallow Base – Aluminum

Renewal Parts
Part Number Description Part Number Description

21122 Feed Through Assy. 21306 Bottom Cover Assembly

21326* Thermoswitch Replacement Kit 10035-62 3/32˝ O-Ring, 6.25” I.D.
21254 Outer Lens 10048-25 Gasket Lubricant – 5.3 oz. Container
21256 Outer Lens Boot

* Includes 10047-2943 Thermoswitch, 21320 Locking Bracket and 10033-81 Pop Rivet.

Runway and Taxiway Inset Lights

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 47
 TOL
AIRPORT LIGHTING PRODUCTS

Taxiway
Omnidirectional Light
Compliances: FAA AC 150/5345-46: L-852E
ICAO Annex 14 TOL
Features Ordering Information
• Variety of Mounting Methods
• Optional high-strength casting — – – – –
double the tensile strength of
ductile iron
• Optional metallic-ceramic coating Fixture Type:
for increased corrosion resistance 21078 = 11.25 Inch Bolt Circle
20510 = 10.25 Inch Bolt Circle

Type of Leads:
P = Lead with L-823 Plug
(Blank) = Leads with Spades

Color:
B = Blue R = Red
C = Clear Y = Yellow
G = Green

Lamp Wattage:
40 = 40W 120V 10047-612
45 = 45W 6.6A 20553
115 = 115W 6.6A 20496 *

Options:
NM = High-Strength Casting
CR = Corrosion Resistant Coating

* 115W Lamp not applicable for fixtures with Blue and Green Lenses.

www.chalp.com
1 . 48
Outline Drawing TOL: 21078
11.94 DIA
(303) Instruction Manual: 8352
11.25 DIA
(286)
Shipping Weight: 32 lbs.
1.00
(25)
14.5 kg.
.75
(19) Shipping Volume: 0.7 cu.ft.
.02 cu.m.

Photometric Data: Contact Field Services

2.38
(64)

Six (6) bolt holes on an 11.25 inch diameter

Accessories
Catalog Shipping Weight Shipping Volume
Number Item Description Lb. Kg. Cu.Ft. Cu.M.

AC24242Q200303 Base L-868, Class I, 24” deep 63.0 28.6 2.5 .070
33004 Transformer 100W, 6.6/6.6A 12.0 5.4 0.4 .011
33001 Transformer 30/45W, 6.6/6.6A 8.0 3.6 0.2 .006
823KP-D4D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.
10047-1425 Heat Shrink Kit 2 PC

Note: Sectional bases may be required depending upon the paving technique.

Renewal Parts
Part Number Description Part Number Description

20801 Socket Bracket Assembly 10035-33-345 O-Ring for Lens

19095-1 Socket Assembly (6.6A) 20512-1 Inner Cover Assembly w/ L823 Connector
20405 Socket Assembly (120V) 20512-2 Inner Cover Assembly w/ Spade Connector
19412-(color) Lens 20400-2 O-Ring for Inner Cover
10047-612 Lamp 40W (120V) 20512-3 Inner Cover Assembly (120V) w/ L823 Connector
20553 Lamp 45W (6.6A) 20512-4 Inner Cover Assembly (120V) w/ Spade Connector
20496 Lamp 115 (6.6A)

Runway and Taxiway Inset Lights

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 1. 49
 Notes

www.chalp.com
1 . 50
 SECTION 2

Runway & Taxiway

Elevated Lights

Runway and Taxiway Elevated Lights

Runways and taxiways are the operational backbone of the has set forth standards dictating how fixtures must perform
airfield and just like inset fixtures elevated fixtures provide determined by fixture location on the field and the operat-
vital movement information to the pilot. Location, color and ing conditions. For elevated fixtures Crouse-Hinds Airport
intensity are all important to the pilot when determining his Lighting Products has the correct fixture for your airfields
position on the airfield. The Federal Aviation Administration operating category certification.

Application Icons

Runway Light Runway/ Elevated Stop

Threshold Bar Light
Light
 ERL
AIRPORT LIGHTING PRODUCTS

Elevated Runway Light

Compliances: FAA AC 150/5345-46: L-861 Series
ICAO Annex 14
UFC 3-535-01
USN NAVAIR 51-50AAA-2
NASAO Guidelines ERL
Applications Ordering Information Taxiway edge lights are typically blue
(-B); threshold/end lights are typically
The ERL Model 5 is used as a How to Order: A complete assembly green/red (-GR); heliport lights are
medium intensity runway edge will consist of separate order items typically yellow (-Y).
light, taxiway edge light, medium for the ERL fixture, stake or baseplate Example: 40938-CY-45-24 is a 24
intensity threshold light, and heliport with base or junction box with cover, inch high fixture with a clear/yellow
perimeter light for both constant isolation transformer, and L-823 globe and 45 watt quartz bi-pin
current and voltage circuits. connector kit. lamp.

Features 4 0 9 – – – –
• ETL Certified
(As listed in Table 1 only) Fixture Type:
38 = Quartz/Bi-Pin
• Clamp band for globe 39 = Incandescent/Medium Prefocus
• Single piece die-cast aluminum body 43 = Incandescent/Medium Screw (E27)

• Adjustable height Color:

• Frangible coupling for stake, C = Clear R = Red
baseplate, or junction box mounting B = Blue Y = Yellow
G = Green X = Opaque/Blank
• Prismatic globe
• Full range of standard aviation Lamp Wattage:
color globes 30W = 30 watt lamp 100W = 100 watt lamp
45W = 45 watt lamp 116W = 116 watt lamp
• Constant current or voltage 69W = 69 watt lamp
operation available
• Prefocused quartz halogen or Height in Inches:
14 = Standard height 14 inches
incandescent lamps available
Available in 2 inch increments to 30 inches.
• Available with 1.5 inch or 2 inch
frangible coupling Options:
MC2 = Metal Frangible Coupling 2 Inch

Table 1 Other Lamps Available

Part Lamp Lamp/
Type Number Color Wattage Lamp Type Part No. Socket Lamp Rating Lamp Style Lamp P/N
40938 Clear 45W/6.6A Tungsten-Halogen / Bi-Pin 40732 40939 40W/120VAC Incandescent 10047-608
40938 Clear/Yellow 45W/6.6A Tungsten-Halogen / Bi-Pin 40732 40943 40W/120VAC Incandescent 10047-1636
L-861
40939 Clear 45W/6.6A Incandescent 10047-1497 40943 69W/120VAC Incandescent 10047-2558
40939 Clear/Yellow 45W/6.6A Incandescent 10047-1497 40943 116W/120VAC Incandescent 10047-1577
40938 Green/Red 30W/6.6A Tungsten-Halogen / Bi-Pin 40737 40943 100W/240VAC Incandescent 10047-2145
L-861E 40938 Green/Red 45W/6.6A Tungsten-Halogen / Bi-Pin 40732 Tungsten-
40938 45W/6.6A 10047-2137
40939 Green/Red 45W/6.6A Incandescent 10047-1497 Halogen/Pk 30d
40938 Blue 30W/6.6A Tungsten-Halogen / Bi-Pin 40737 Tungsten-
40938 100W/6.6A 10047-2138
L-861T 40938 Blue 45W/6.6A Tungsten-Halogen / Bi-Pin 40732 Halogen/Pk 30d

40939 Blue 45W/6.6A Incandescent 10047-1497

www.chalp.com
2.2
Installation Drawings
Stake Mounted ERL Base Mounted ERL

Clamp Band
Clamp Band Globe (Included)
(Included) Support
Breakable 1˝ EMT (Included)
(Included)
Coupling
(Included) Baseplate

Primary Cable Dimensions: inches
(mm)
Instruction Sheets: 8627 (40938)
Base
*Transformer Connector Kit* 8628 (40939)
Connector Kit*
8803 (40943)
Stake 30
Assembly (762) Transformer* Shipping Weight: 3.0 lbs.
2˝ Conduit Entrance 1.4 kg.
* Constant Current Only
Shipping Volume: 0.1 cu.ft.
.003 cu.m.
Note: All ERL 6.6A versions include a lead
with L-823 plug. All ERL 120v versions have wire leads without connectors.
Photometric Data: Contact Field Services

Accessories
Catalog Shipping Weight Shipping Volume
Number Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2˝ Hub, Painted Steel 8 3.6 .14 .004

AP1935 Baseplate, 1.5˝ Hub, Painted Steel 8 3.6 .14 .004
AC21242H200301 Base L-867, class I, 24˝ deep 52 23.6 2.6 .074
AW2202 Stake Assembly, 2˝ HUB 8 3.6 .2 .006
AW2205 Stake Assembly, 1.5˝ HUB 8 3.6 .2 .006
AW7609/AW7805 Junction Box & Cover 12 5.4 .2 .006
33001 Transformer L-830-1, 6.6/6.6A 8 3.6 .2 .006
33002 Transformer L-830-2, 20/6.6A 8 3.6 .2 .006
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32˝ to .43˝ O.D.

Renewal Parts
Part Number Description Part Number Description

40878-2P 1˝ EMT Extension (14˝ Standard) 50035-1* Globe Support Assembly 19˝ leads (40939)

Runway and Taxiway Elevated Lights

40878-7P 1˝ EMT Extension (24˝) 50035-2* Globe Support Assembly 29˝ leads (40939)
40878-10P 1˝ EMT Extension (30˝) 10H27-013D20 Set Screw–Socket
50107 Clamp Band 40937 Socket Mounting Bracket (40938)
ML5411 Clear Globe – Glass 40749 Socket (40938)
ML331 Blue Globe – Glass KL6168 Socket (40939)
ML2075 Red Globe – Glass 10047-1559 Socket (40943)
FL6477 Yellow Globe – Glass 40918 Lead Assembly 14˝ (40938)
ML5412 Clear/Yellow Globe – Glass 40918-7 Lead Assembly 24˝ or 30˝ (40938)
ML5571 Clear/Red Globe – Glass FL3621 Lead Assembly 14˝ (40939 & 40943)
ML5413 Green/Red Globe – Glass FL1012A Lead Assembly 24˝ and 30˝ (40939 & 40943)
50034* Globe Support Assembly (40938) 10035-37 O-Ring Seal
50034-1* Globe Support Assembly 19˝ leads (40938) 50186 Frangible Coupling – Aluminum 1.5 Inch
50034-2* Globe Support Assembly 29˝ leads (40938) 50184 Frangible Coupling – Aluminum 2 Inch
50035* Globe Support Assembly (40939) 40948* Globe Support
* Includes Clamp Band

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 3
 HRLQ
AIRPORT LIGHTING PRODUCTS

High Intensity
Runway Light/Quartz
Compliances: FAA AC 150/5345-46: L-862 Series
ICAO Annex 14, Figure A2-9
UFC 5-535-01
USN NAVAIR 51-50AAA-2 / NATO STANAG 3316 HRLQ
Applications Ordering Information
The HRLQ High Intensity Runway Light How to Order: Construct the basic Examples: 86242-T-RG-200-14 is a 14
is used for elevated runway edge catalog number by adding the inch high HRLQ with 2 inch diameter
lighting and elevated threshold and frangible column thread diameter. threaded breakable column and a 200
end lighting. Choose the application which watt lamp. It is bidirectional with a
determines if one or both directions straight beam red side for the runway
Features have the light beam toed-in toward end and a right toe-in green side for
• ETL Certified the runway centerline. Add the colors, the threshold.
(As listed in Table 1 only) lamp wattage, and height. A two 86241-E-CY-120-24 is a 24 inch high
• Meets ICAO Recommendations for runway conductor lead with L-823 plug and HRLQ with a 120 watt lamp and 1.5
edge and end lighting the lamp are included. Threshold inch breakable column. It is used as a
lights should be ordered with half the bidirectional edge light and the clear
• Inner Lens and Outer Globe to focus the quantity right toe-in and half left beam is left toe-in and the yellow
main beam toe-in. beam is right toe-in.
• Clamp Band for the outer globe
8 6 2 4 – – – –
• Available with 1.5 inch or 2 inch frangible
coupling Left Right
Fixture Type: Toe-In Toe-In
• Uses a 6.6 amp quartz bi-pin lamp for most Color Color
applications HRLQ Model:
• Cast Aluminum Housing painted yellow
Frangible Coupling Size:
• Available in heights from 14 inches to 30 1 = 1.5” Thread
inches 2 = 2” Thread
Table 1 Application*:
E = Runway Edge
Edge Lights Threshold/End Lights
T = Threshold/Runway End
86241-E-XX-120-XX 86241-T-RG-200-XX
86242-E-XX-120-XX 86242-T-RG-200-XX Color/Color*:
C = Clear G = Green X = Opaque/Blank
86241-E-XX-150-XX
B = Blue R = Red Y = Yellow
86242-E-XX-150-XX
Lamp Wattage:
Runway Edge (E) 120 = 120w Bi-Pin 20058 - L-862, ICAO Fig. 2.10
150 = 150w Bi-Pin 40925 - ICAO Fig. 2.11
200 = 200w Bi-Pin 20172 - FAA L-862E **
201 = 200w Pk-30d 10047-2477 - L-862E **
Left Right
Toe-in Toe-in 151 = 150w Pk-30d 10047-2310 ICAO FIG. 2.11
Perpendicular 122 = 115w DCR 20496 **
to Runway 202 = 200w DCR 20268 **
Threshold (T) Centerline
-RX Right Left -XR
-XG Toe-in Toe-in -GX Height in Inches:
-RG -GR Standard Height 14 Inches
Available in 2 inch increments to 30 inches.
Runway
Centerline * Beam orientation is determined by the application and the color position in the catalog
number. For the Threshold version, the green beam is always toed-in and the red beam is
Straight Straight always straight.
Bream Bream ** 200 Watts for FAA Threshold/End Light.

www.chalp.com
2.4
Installation Drawings Base Mounted HRLQ

Instruction Sheet: 8922

Shipping Weight: 4.5 lbs

2.0 kg.

Shipping Volume: 0.31 cu.ft.

.009 cu.m.

Photometric Data: Contact Field Services

Note: For fixtures extended above standard 14 inch height, * order separately
the breakable column is a three piece assembly.

Accessories
Catalog Shipping Weight Shipping Volume
Number Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2” Hub, Painted Steel 8 3.6 0.14 .004

AP1935 Baseplate, 1.5” Hub, Painted Steel 8 3.6 0.14 .004
AC21242H200301 Base L-867, class I, 24” deep 52 23.6 2.6 .074
AW2202 Stake Assembly, 2” Hub 8 3.6 0.2 .006
AW2205 Stake Assembly, 1.5” Hub 8 3.6 0.2 .006
823KP-D4-D4 Connector Kit L-823, 8 AWG Stranded, .32” to .43” O.D.
40999 Leveling Fixture
33004 Transformer, 100W, 6.6/6.6A 8.6 3.9 0.3 .009
33150 Transformer, 150W, 6.6/6.6A 16.0 7.3 0.4 .011
33006 Transformer, 200W, 6.6./6.6.A 16.0 7.3 0.4 .011

Renewal Parts
Part Number Description Part Number Description

10050-20 Clear Outer Globe-Edge 40972-* Inner Lens Assembly (360°)

10050-21 Red/Green Outer Globe - Threshold/End, R# 40989 Globe Gasket
10050-21-RX Red/Blank Outer Globe, End, L# 40992-1 Optical Subassembly and Lead for 16-20” Height
10050-21-XG Blank/Green Outer Globe 40992-2 Optical Subassembly and Lead for 22-30” Height

Runway and Taxiway Elevated Lights

10050-22 Green/Red Outer Globe -Threshold/End, L# 40947 Clamp Band
10050-22-XR Blank/Red Outer Globe, End, R# 40718 Locknut, 1.5”
10050-22-GX Green/Blank Outer Globe, Threshold, L# 10047-589 Locknut, 2”
10050-23-B Blue Inner Lens (180°) 10038-31 Lockpin
10050-23-C Clear Inner Lens (180°) 40983-1 Breakable Column 1.5” (Standard Height)
10050-23-G Green Inner Lens (180°) 40983-2 Breakable Column 2” (Standard Height)
10050-23-R Red Inner Lens (180°) 40994-5 EMT Extension Pipe for 24” Height
10050-26 Clear/Blank Outer Globe - Edge, L# 40994-8 EMT Extension Pipe for 30” Height
10050-27 Blank/Clear Outer Globe - Edge, R# 41852 Upper Fitting, Support Column (All Extensions)
10050-29 Clear/Green Outer Globe, R# 50184 Frangible Coupling 2” Aluminum
10050-30 Green/Clear Outer Globe, L# 50049 Frangible Coupling 1.5” - Plastic
10050-31 Red Outer Globe 50186 Frangible Coupling 1.5” - Aluminum
40959 Yellow Inner Lens (180°)

# Indicates left or right toe-in

* Add letters for two colors such as -CC or -CY. For red and green combinations, order colored outer globe and -CC inner lens.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 5
 HRLI
AIRPORT LIGHTING PRODUCTS

High Intensity
Runway Light/Quartz - ICAO
Compliances: ICAO Annex 14, Figures A2-9, A2-10

HRLI
Applications Ordering Information
The HRLI High Intensity Runway Light How to Order: Construct the basic Example: 862I2-E-CY-150-24-60 is a 24
is used for elevated runway edge catalog number by adding the inch high HRLI with a 150 watt lamp
lighting and elevated threshold and frangible column thread diameter. and 2 inch frangible column. It is used
end lighting. Choose the application which as a bidirectional edge light and the
determines if one or both directions clear beam is left toe-in and the yellow
Features have the light beam toed-in toward beam is right toe-in. It is designed for
• The HRLI is the same high quality light the runway centerline. Add the colors, runways up to 60 Meters wide.
fixture as the Cooper Crouse Hinds ETL lamp wattage, and height. The lamp
certified, FAA compliant light. The inner and 2 conductor lead with L-823 plug
and outer glassware is engineered to are included. Threshold lights should
produce a light beam that meets ICAO be ordered with half the quantity right
recommendations for 45 Meter or 60 toe-in and half left toe-in.
Meter wide runways.
• 2 inch (50mm) frangible column 8 6 2 I – – – – –
• Uses a 6.6 amp quartz bi-pin or Left Right
Fixture Type: Toe-In Toe-In
PK-30d lamp. Color Color
• Cast Aluminum Housing painted yellow Frangible Column
Size:
• Available in heights from 14 inches
1 = 1.5” Thread (38mm)
(350mm) to 30 inches (750mm). 2 = 2” Thread (50mm)

Application*:
E = Runway Edge
Runway Edge (E)
Color/Color*:
C = Clear Y = Yellow

Lamp Wattage:
120 = 120w Bi-Pin 20058 - L-862, ICAO Fig. A2-9
Left Right 150 = 150w Bi-Pin 40925 - ICAO Fig. A2-10
Toe-in Toe-in 151 = 150w Pk-30d 10047-2223 ICAO FIG. A2-10
Perpendicular
to Runway
Centerline Height in Inches:
Standard Height 14 Inches
Available in 2 inch increments to 30 inches.

Runway Width:
45 = 45 Meters
60 = 60 Meters

* Beam orientation is determined by the application and the color position in the catalog
number. For the Threshold version, the green beam is always toed-in and the red beam is
always straight.

www.chalp.com
2.6
Installation Drawings Base Mounted HRLI
Outer globe

Lockpin optical assembly

Shipping Weight: 4.5 lbs Clamp Band Frangible Column

2.0 kg. (See Note)

Locknut
Shipping Volume: 0.31 cu.ft.
.009 cu.m.

Photometric Data: Contact Field Services

Base*
Connector Kit*
Note: For fixtures extended above standard 14 inch (350mm) * order separately
Transformer*
height, the frangible column is a three piece assembly.
2” Conduit Entrance

Accessories
Catalog Shipping Weight Shipping Volume
Number Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2” Hub, Painted Steel 8 3.6 0.14 .004

AC21242H200301 Base L-867, class I, 24” deep 52 23.6 2.6 .074
AW2202 Stake Assembly, 2” Hub 8 3.6 0.2 .006
823KPS-ED4-ED4 Connector Kit L-823, 6mm Stranded, Shielded
40999 Leveling Fixture
33004 Transformer, 100W, 6.6/6.6A 8.6 3.9 0.3 .009
33150 Transformer, 150W, 6.6/6.6A 16.0 7.3 0.4 .011
33006 Transformer, 200W, 6.6./6.6.A 16.0 7.3 0.4 .011

Renewal Parts
Part Number Description

40989 Globe Gasket

40947 Clamp Band
10047-589 Locknut, 2”
10038-31 Lockpin

Runway and Taxiway Elevated Lights

40983-2 Frangible Column 2” (Standard Height)
40994-5 EMT Extension Pipe for 24” Height
40994-8 EMT Extension Pipe for 30” Height
41852 Upper Fitting, Support Column (All Extensions)
50184 Frangible Coupling 2” Aluminum (Spare)
50519 Clear Outer Globe
10050-23-C Clear Inner Lens
40959 Yellow Inner Lens

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 7
 HRLQ-5
AIRPORT LIGHTING PRODUCTS

High Intensity
Runway Light/Quartz
Compliances: FAA AC 150/5345-46: L-862 and L-862-E
ICAO ANNEX 14: FIG. A2-9 HRLQ-5
Applications Ordering Information
The HRLQ-5 High Intensity Runway Light
is used for elevated runway edge lighting 8 6 2 5 – – –
and elevated threshold and end lighting.

Features Fixture Type:

• ETL Certified HRLQ Model:
• Requires no tools to relamp – fixture hinges
open for lamp access and ease, and is held Application and Beam Color:
shut by a spring clip (See “YYY”, Table 1)
• Easy to level – unique swivel design allows
fixture to be leveled by loosening and Height in Inches:
tightening one exterior fastener Standard Height 14 Inches. Available in 2-inch
• Easy to change filters – twist in place allowing increments to 30 inches maximum.
beam color to be field adjustable (LH & RH toe-
in) on standard “edge” lights and on blue/clear Options:
displaced threshold “edge” lights 1 = 1.5 “-12 UNF threaded coupling (standard is 2”-11.5 NPSM)
2 = 200 W lamp in place of 120 W or 150 W, L-862
• 300 MPH wind tested (not available for blue color edge lights)
• Modular design 3 = Level adjustment lever in place of standard hex socket cap screw
• Uses a 6.6 amp quartz bi-pin lamp 5 = 150 W lamp in place of 120 W, L-862
• Die-cast aluminum housing painted yellow EX = Extra strength fixture (high wind/heavy snow)
Options 1 & 3 not available with EX Option
• Available in heights from 14-30 inches
Figure A
• Airbus 380 Approved
light beam directions
• Standard 2” Threaded Frangible Coupling Colors indicated are the normal standards. Other special
application combinations available are listed in Table 1.
Table 1 (*Indicates FAA Approved to AC 150/5345-46) View runway edge lights from runway centerline perpendicular
Specification Min. Lamp to fixture when determining color in conjunction with right-
YYY Application Beam Color Number (FAA) Wattage (RH) and left-hand (LH) fixtures. The first color will be on the
ECC Edge, Standard* Clear/Clear L-862 120 left toe-in side of the globe.
ECY Edge, Standard, LH* Clear/Yellow L-862 120 3.5° right 3.5° left
toe-in (green) toe-in (green)
EYC Edge, Standard, RH* Yellow/Clear L-862 120
ECR Edge, LH, Displaced End* Clear/Red L-862 150 Threshold/ Threshold/
ERC Edge, RH, Displaced End* Red/Clear L-862 150 End lensing
runway threshold
End lensing
ERY Edge, LH, Displaced End Red/Yellow L-862 150 elevation 5.5° elevation 5.5°
(RH, REF) (LH, REF)
EYR Edge, RH, Displaced End Yellow/Red L-862 150
ECB Edge, LH, Displaced Threshold Clear/Blue L-862 150
Straight beam, Straight beam,
EBC Edge, RH, Displaced Threshold Blue/Clear L-862 150 end light only (red)
end light only (red) ~ ~
EBR Edge, RH, Displaced End* Blue/Red L-862 150
ERB Edge, LH, Displaced End* Red/Blue L-862 150 3.5° right 3.5° left
TCG Edge, RH, Displaced Threshold Clear/Green L-862/L-862E 200 toe-in (clear) toe-in (clear)
TGC Edge, LH, Displaced Threshold Green/Clear L-862E/L-862 200 Runway Runway
TYG Edge, RH, Displaced Threshold Yellow/Green L-862/L-862E 200 Edge lensing runway Edge lensing
TGY Edge, LH, Displaced Threshold Green/Yellow L-862E/L-862 200 elevation 3.5° centerline elevation 3.5°
(RH, REF) (LH, REF)
TRG Threshold/End, RH* Red/Green L-862E 200
TGR Threshold/End, LH* Green/Red L-862E 200
3.5° left toe-in 3.5° right toe-in
TXG Displaced Threshold, RH* Blank/Green L-862E 200 (usually clear (usually clear
TGX Displaced Threshold, LH* Green/Blank L-862E 200 but could be but could be
SRR End (Straight Beam)* Red/Red L-862E 200 yellow last 2000 yellow last 2000
feet) feet)
SRX End (Straight Beam) Red/Blank L-862E 200
RH = right-hand; lh = left-hand; see figure a for light beam directions.
e = runway edge light; t = runway threshold light; s = runway end light

www.chalp.com
2.8
Outline Drawing Typical Photometric Data
5,000 CD MINIMUM REQUIRED
10,000 CD AVERAGE REQUIRED
Outer Globe (ACTUAL AVERAGE = 11,170 CD SHOWN)
1,000 CD MINIMUM REQUIRED
Optical
Assembly
12
1,000 CD

Breakable

VERTICAL ANGLE
Coupling 8
5,000 CD

10,000 CD
12,000 CD
4

Base* Connector Kit*

0
TransformeR*

2” Conduit -12 -8 -4 0 4 8 12
Entrance HORIZONTAL ANGLE CD = CANDELAS (WHITE LIGHT)

* Order separately. L-862 High-Intensity Runway Light, 120 W Clear

Accessories
Catalog Item Shipping Weight Shipping Volume
Number Description lbs. kg cu. ft. m3

AP1932 Baseplate, 2” Hub, Painted Steel 8 3.6 0.14 .004

AP1935 Baseplate, 1.5” Hub, Painted Steel 8 3.6 0.14 .004
AC2124H200301 Base L-867, Class I, 24” deep 52 23.6 2.6 .074
823KP-D4-D4 Connector Kit L-823, 8 AWG Stranded, .32” to .43” O.D.
50359 Leveling Fixture
33004 Transformer, 100 W, 6.6/6.6 A 8.6 3.9 0.3 .009
33006 Transformer, 200 W, 6.6/6.6 A 8.9 4.04 0.3 .009

Renewal Parts
Part Number Description Part Number Description

Runway and Taxiway Elevated Lights

50344-C Clear Outer Globe (for “ECC”, “ECY”, “EYC”, 40989 Globe Gasket
“ECB” and “EBC” applications) 50351 Filter Gasket
50344-R/G Red/Green Outer Globe 50366 Filter Spring
(for “TRG” applications) 20058 Lamp, 120 W, 6.6 A, Bi-Pin
50344-R/X Red/Blank Outer Globe 20172 Lamp, 200 W, 6.6 A, Bi-Pin
(for “SRX” applications) 40925 Lamp, 150 W, 6.6 A, Bi-Pin
50344-X/G Blank/Green Outer Globe
(for “TXG” applications)
50344-G/R Green/Red Outer Globe (for “TGR” applications)
50344-G/X Green/Blank Outer Globe (for “TGX” applications)
50344-R Red Outer Globe (for “SRR” applications) Instruction Sheet: 2016
50360-C Clear Inner Filter Half (2 required on units with clear,
Shipping Weight: 4.5 lbs.
blank or colored outer globe) 2.0 kg
50360-Y Yellow Inner Filter Half
50360-B Blue Inner Filter Half Shipping Volume: 0.31 cu. ft.
50344-C/G Clear/Green Outer Globe (for “TCG” and “TYG” applications) .009 m3
50344-G/C Green/Clear Outer Globe (for “TGC” and “TGY” applications)
50344-C/R Clear/Red Outer Globe (for “ECR”, “EYR” and “EBR” applications) Photometric Data: Contact Field Services
50344-R/C Red/Clear Outer Globe (for “ERC”, “ERY” and “ERB” applications)
50184 Frangible Coupling 2” Aluminum
60683-E Frangible Coupling 2” Aluminum—EX Option

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 9
 SBL
AIRPORT LIGHTING PRODUCTS

Elevated Stop
Bar Light
Compliances: FAA AC 150/5345-46: L-862S SBL
Applications Ordering Information
The SBL fixture is used for runway How to Order: To the basic catalog Example: 862S-14 is a red stop bar
incursion protection and traffic control number, add the height. A breakable light 14-inches high.
on taxiways just before active runways. coupling is required for proper
It is required for SMGCS operations mounting and is supplied with the
during low visibility conditions as fixture. Order base plate separately.
defined in FAA AC 150/5340-28 and
AC 120-57A. This unidirectional light
is designed for use in all weather
conditions with any kind of control
system including the Digitrac® Control 8 6 2 S
and Monitoring System.

Fixture Type:
Features
• ETL Certified L-862S
• Uses PK-30d low power consumption Height, Inches:
lamp Standard Height 14 inches
• Easy to install – mounts on a standard
Available in 2-inch increments to 26 inches.
2-inch (50 mm) mounting pipe with
frangible coupling 200 CD MINIMUM REQUIRED
2,000 CD AVERAGE REQUIRED
• Mounting pipe extension included ACTUAL AVERAGE - 4,600 CD SHOWN
1,000 CD MINIMUM REQUIRED
• Easy to relamp – special tools are
not required 8

• Cast aluminum housing

• Easy to aim
• Traffic signal red lens – eliminates 4
need for separate filter
• Light head shipped fully assembled
VERTICAL ANGLE

with lead assembly

0
• Control and Monitoring – Fixture can be 2,000 CD
supplied with a Crouse-Hinds Logitrac for
individual lamp control and monitoring
as required for flashing guard light 1,000 CD
-4
operation or stop bar control. Contact
Crouse-Hinds for more info -6

-8

-18 -12 -6 0 6 12 18
HORIZONTAL ANGLE CD = CANDELA (RED BEAM)

Typical photometric at 0° and 6.6 amps

www.chalp.com
2 . 10
Outline Drawing LEnS CLIP,
P P/n50121
PAn HEAd SCREw, P/n 10000-438
P 50251-RT LEnS

CAPTIvE SCREw
P/n 10037-754

LAmP,
P P/n 10047-2310
14" STd.
(356 mm)
TuRnBuCkLE, P/n
10037-781
SLIPFITT
P/n 5010

FRAngIBLE PIPE
SEE TABLE
T 1
BELow

LEAd ASSy
SEE T
TABLE 1
BELow

Accessories
Shipping Weight Shipping Volume
Part Number Description Lbs. Kg Cu.Ft. Cu.M.

10047-2154 Heat Shrink Kit (1-piece)

10047-1425 Heat Shrink Kit (2-piece)
33006 Isolation Transformer 200 W, 6.6/6.6 A 8.9 4.04 0.3 0.009
33150 Isolation Transformer 150 W, 6.6/6.6 A 8.9 4.04 0.3 0.009
50133 Aiming Device (Optional) 2.0 0.91 0.13 0.004
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.
AC21242H200301 Base L867, Class I, 24” Deep 52.0 23.6 2.6 0.074
AP1932 Baseplate, 2” Hub, 12” Diameter 8.0 3.6 0.14 0.004

Renewal Parts
Part Number Description Part Number Description

10A10-025D32 Bolt, Slipfitter Hex 10037-781 Turn Buckle

10000-438 Pan Head Screw 50121 Lens Clip

Runway and Taxiway Elevated Lights

10047-754 Captive Screw 50251-RT Lens, Traffic Signal Red
10047-2310 Lamp, PK-30d, 150 W, 6.6 A 50306 - X Frangible Pipe Extension (See Table 1)
50106Y Slipfitter, Less Hardware 50307 - X Lead Assy., 6.6 A, (See Table 1)

Table 1

Height Frangible Pipe Lead Assembly

Inches (mm) Part No. Part No.
Instruction Sheet: 9818
14 (355.6) 50306-1 50307-1
Shipping Weight: 6.7 lbs
16 (406.4) 50306-2 50307-2 3.04 kg

18 (457.2) 50306-3 50307-3 Shipping Volume: 0.80 cu.ft.

0.024 cu.m.
20 (508.0) 50306-4 50307-4
22 (558.8) 50306-5 50307-5
24 (609.6) 50306-6 50307-6
26 (660.4) 50306-7 50307-7

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 11
 RGL
AIRPORT LIGHTING PRODUCTS

Runway
Guard Light
Compliances: FAA AC 150/5345-46: L-804 RGL
ICAO Annex 14, Fig. A2-25 Patent No. Des. 403,263

Applications Ordering Information

The RGL (Runway Guard Light) is used
to enhance the visibility of taxiway 8 0 4 E 2 – – –
holding positions. Two RGL fixtures are
installed at each end of the holding
position line. Each fixture alternately Fixture Type:
flashes its two lamps.
Elevated:
Features
• ETL Certified L-804 RGL Model:
• Uses two 100 W (PK-30d) quartz halogen 2 = Two 100w Lamps
lamps
Input Power:
• Adjustable light beam elevation with 066 = 6.6 Amp Series Circuit
positive locking in one-degree increments
• Minimum average intensity exceeds 3000 Options:
candelas in traffic yellow 1 = External ON/OFF switch, 6.6 A.
• Alternately flashes 45–50 times per minute 2 = Not available.
3 = Without monitoring feature.
• Easy to maintain – no tools are required for 4 = Internal Logitrac digital control & monitoring (6.6 A series circuit only).
relamping or replacing circuit cards Consult sales for assistance.
• External ON/OFF switch allows field 5 = Anti-rotation plate for 16-inch diameter baseplate.
relamping or circuit card replacement
without de-energizing entire power loop
(see option 1)
• High-strength frame and aluminum
housing
• Base mounted with 2-inch frangible
coupling 14”
(356 mm) 27.0”
• Supplied with tether and 12-inch (686 mm)
anti-rotation locking plate
Light
• 300 MPH jet blast resistant Head

• Basic unit supplied with dry contact output 12.0”

(305 mm)
monitoring
Lens Cap
• Computer control and monitoring
23.8”
available Circuit Card (604 mm) Flexible Conduit
(see option 4) Control Box Wing Nut Metal Conduit Fitting
Leg

Breakable Anti-rotation
Instruction Manual: 2520 Coupling Plate
Tether
Shipping Weight: 55 lbs.
Yoke (install perpendicular Baseplate
25 kg (heavy duty)
with taxiway center line)

Shipping Volume: 7.22 cu. ft.

0.204 m3
Side View Front View

www.chalp.com
2 . 12
Typical Photometric Data
3,000 CD AVERAGE REQUIRED
(ACTUAL AVERAGE = 3,900 CD SHOWN)
1,500 CD MINIMUM REQUIRED
300 CD MINIMUM REQUIRED
1,000 CD MINIMUM REQUIRED

300 CD

24

1,000 CD
12
VERTICAL ANGLE

3,000 CD

-12
24 12 0 12 24
HORIZONTAL ANGLE CD = CANDELAS (YELLOW LIGHT)

Typical photometric output of runway guard light,

yellow, steady burning @ 6.6 amps (804E2-066 shown)

Accessories
Shipping Weight Shipping Volume
Part Number Description lbs. kg cu. ft. m3

AC21242H200301 Base L867, Class I, 24” Deep 52.0 23.6 2.6 0.074
33004 Isolation Transformer, 100 Watts, 6.6/6.6 A 8.9 4.04 0.3 0.004
AP1832 Baseplate, 12” Diameter
AP2832 Baseplate, 16” Diameter

Runway and Taxiway Elevated Lights

Renewal Parts*
Part Number Description Part Number Description

10000-367 Circuit Card Mounting Screw 50260-1 Control Circuit Card, 6.6 A Units
10037-409 Male-Female Hex Standoff, 50265-1 Monitor Circuit Card, 6.6 A Units
for Units with Monitoring (except option 4) (except option 4)
10047-2138 Lamp, 100 W, 6.6 A (PK-30d) 50276 Logitrac Mounting Plate (option 4 only)
10056-1752 Logitrac Circuit Assembly (option 4 only) 50500 Control Box Door Assembly (includes gasket,
50244 Anti-rotation Plate, 12” warning label, hinge half and strike)
50244-1 Anti-rotation Plate, 16” (option 5 only) 60683-10A Frangible Coupling
50255 Wire (group E replacement, option 4 only) 60984 Tether

* Traffic Visor, Traffic Signal Head and PC Weldment parts have changed as of June 2005.
Consult factory for replacement availability.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 13
 TEL-5
AIRPORT LIGHTING PRODUCTS

Medium Intensity Runway

Threshold/End Light
Compliances: FAA AC 150/5345-46B: L-861SE TEL-5
Applications Ordering Information
The TEL-5 is intended to enhance the
visibility of thresholds on medium 8 6 1 5 – S – –
intensity runways that do not have
approach lighting.
Fixture Type:
Features Model 5:
• ETL Certified
Type S:
• L861SE Fixture with 120W lamp
• Requires no tools to relamp - Beam Color & Type:
fixture hinges open for lamp access and GX = Green/Blank
ease, and is held shut by a GR = Green/Red
spring clip RR = Red/Red
• Easy to level - unique swivel design
allows fixture to be leveled by loosening Height in Inches:
and tightening one exterior fasterner Standard Height = 14 inches
• Easy to change filters - twist in place
Available in 2-inch increments to 30 inches maximum
• 300 MPH wind tested Options:
• Modular design 1 = 1.5˝-12 UNF threaded aluminum frangible coupling
• Utilizes 6.6 amp quartz bi-pin lamp
3 = Level adjustment lever in place of standard hex socket cap screw
EX = Extra strength fixture for high wind and heavy snow areas. This option
• Die-cast aluminum housing, painted replaces the standard frangible coupling, housing column, and clamps
yellow with extra strength components.
• Available in heights 14 inches to
30 inches
• Standard 2” Threaded Frangible Coupling

www.chalp.com
2 . 14
Outline Drawing Typical Photometric Data

1000 CD 300 CD MIN.

outer globe 600 CD AVG
600 CD

optical
Assembly 12

Breakable
Coupling

VERTICAL ANGLE
8

Base* Connector kit*

Transformer* 0

-12 -8 -4 0 4 8 12
2˝ conduit HORIZONTAL ANGLE
Entrance CD AVG 977
MAX/MIN. 4.18
8615-SGX-XX 1000 CD
*order Separately L-861SE, GREEN, 120W, LAMP 20058

Accessories
Catalog Item Shipping Weight Shipping Volume
Number Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2˝ Hub, Painted Steel 8 3.6 0.14 .004

AP1935 Baseplate, 1.5˝ Hub, Painted Steel 8 3.6 0.14 .004
AC21242H200301 Base L-867, Class I, 24˝ Deep 52 23.6 2.6 .074
823KP-D4-D4 Connector Kit L-823, 8 AWG Stranded, .32˝ to .43˝ O.D.
50359 Leveling Fixture
33004 Transformer, 100 W, 6.6/6.6A 8.6 3.9 0.3 .009

Renewal Parts

Runway and Taxiway Elevated Lights

Part Number Description

50376-C Clear Outer Globe

50360-G Green Inner Filter
50360-R Red Inner Filter
Instruction Sheet: 2121 (standard fixtures)
50376-C/X Clear/Blank Outer Globe
2325 (-EX fixtures)
40989 Globe Gasket
50351 Filter Gasket Shipping Weight: 4.5 lbs.
50366 Filter Spring 2.0 kg.
20058 Lamp, 120W, 6.6A, Bi-Pin
50184 Frangible Coupling 2” Aluminum Shipping Volume: 0.31 cu. ft.
60683-E Frangible Coupling 2” Aluminum—EX Option .009 cu. m.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 15
 TEL
AIRPORT LIGHTING PRODUCTS

Taxiway Edge Light-LED

Compliances: FAA AC 150/5345-46: L-861 Series
ICAO Annex 14

Applications Ordering Information

The TEL Model 5 is used as a medium How to Order: A complete assembly
intensity, taxiway edge light, for will consist of separate order items
constant current circuits. for the TEL fixture, stake or baseplate
with base or junction box with cover,
isolation transformer, and L-823
Features connector kit.
• ETL Certified
• Blue glass globe for day light recognition
• Durable high impact sealing boot 8 6 1 5 T B 0 6 6 – –
• Single piece die-cast aluminum body
• Adjustable height
• Breakable coupling for stake, baseplate, or
Fixture Type:
junction box mounting
861 = FAA L-861
• Constant current operation
• Available standard with 1.5 inch or optional Model:
2 inch frangible coupling 5 = C-H Model 5 LED Fixture
• Long life LED
Type:
• Internally mounted, sealed, electronic T = Taxiway
power supply
• Direct replacement on existing baseplate Beam Color:
B = Blue
• Less than 8 VA at the highest step
• Complies with intensity requirements for Input Power:
3 - step circuit 066 = 6.6A Constant Current

Height ( Inches):
14 inches Standard
18 inches
22 inches
24 inches
30 inches (Maximum)
Dimensions: inches
(mm)
Options:
Instruction Sheets: 2313 (Standard Fixture) 1 = Arctic Kit
2402 (Fixture with Option 1)
2 = 2” NPS Aluminum Frangible Coupling
Shipping Weight: 3 lbs. 3 = Guard Band S.S.
1.4 kg.
Accessory - Leveling Device,  Order P/N 50400
Shipping Volume: 0.1 cu.ft.
.003 cu.m. Note: Standard fixture 6.6A@60Hz

www.chalp.com
2 . 16
 Installation Drawings
Stake Mounted TEL Base Mounted TEL
2 CD .2 CD

Globe Support
(Included) 6

Base Plate
1” EMT (Included)
L-867 Base 4
Breakable

CANDELA
Coupling
Optional
Isolation Ground Lug 2
Transformer Base
Connector Kit

2” Conduit
Entrance 0
0 4 8 12 16 20 24 28
Connector Kit VERTICAL ANGLE
Primary Cable CD AVG 4 CD
30” (762) Metal MAX/MIN: 2.50
Stake P/N 8615-T
Isolation L-861T, FAA, LED, AVIATION BLUE
Transformer
Optional Ground Rod
* Constant Current Only

Note: All ERL 6.6A versions include a lead with L-823 plug.

Accessories
Catalog Shipping Weight Shipping Volume
Number Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2” Hub, Painted Steel 8 3.6 .14 .004

AP1935 Baseplate, 1.5” Hub, Painted Steel 8 3.6 .14 .004
AC21242H200301 Base L-867, Class I, 24” Deep 52 23.6 2.60 .074
AW2202 Stake Assembly, 2” HUB 8 3.6 .2 .006
AW2205 Stake Assembly, 1.5” HUB 8 3.6 .2 .006
33001 Transformer L-830-1, 6.6/6.6A - 30/45w 8 3.6 .2 .006
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.*
* There will be no shipping info with this item

Renewal Parts
Part Number Description Part Number Description

40878-13P 1” EMT Extension (14”) 50388 Sealing Boot

40878-14P 1” EMT Extension (18”) 10035-63-230 O-Ring Seal

Runway and Taxiway Elevated Lights

40878-15P 1” EMT Extension (24”) 50397 Heatsink Assembly with LED
40878-16P 1” EMT Extension (30”) 50392 LED Power Supply
50380 Blue Globe - Glass 50398-2 Lead Assembly 14 inch
50390 Globe Support Assembly 50398-3 Lead Assembly 20 inch
50186 Frangible Coupling – Aluminum 1.5 Inch 50398-4 Lead Assembly 26 inch
50184 Frangible Coupling – Aluminum 2 Inch 50396 Thermal Tape for Housing/Heatsink
40947-2 Guard Band S.S., .5” x 13”

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2. 17
 Notes

www.chalp.com
2 . 18
 SECTION 3

Approach &
Navigational Aids

Coordinating movement on the airfield is crucial to the safe pilot when determining his position and movement options
and efficient operation of any airfield. Add to that flight oper- on the airfield. The Federal Aviation Administration has

Approach & Navigational Aids

ations taking place in unique environmental conditions and set forth standards dictating how signs must perform and
the needs for highly visible airfield markers takes on even where they must be located. Crouse-Hinds Airport Lighting
more importance. How you address those needs depends Products has the signs designed to meet those standards
on what meteorological conditions you will be operating for your airfields needs in all certification categories.
under. Location, color and intensity are all important to the

Application Icons

PAPI Runway End Flash System Rotating Approach Threshold and Wind Cone
Beacon Approach
 PAPI
AIRPORT LIGHTING PRODUCTS

Precision Approach
Path Indicator
Compliances: FAA AC 150/5345-28: L-880 and L-881
Transport Canada Specifications K342
ICAO Annex 14 PAPI
Applications Ordering Information
The PAPI System provides the pilot a positive How to Order: Construct the Examples: 880A2A-2 is an FAA
visual indication of the aircraft’s position basic catalog number based on L-880 system. It includes the
relative to the optimal glide slope during the number of units per system PCU and tilt switches for voltage
final approach to the runway. and the power available. Add dash operation.
The L-880 PAPI system consists of four units numbers for the temperature class
880A2B-2-11 is an ICAO PAPI
in a line or bar, each unit having two or three and options. Style A includes the
system. It includes the EMT legs
200 watt lamps. The PAPI unit produces PCU. Style B includes the isolation
and it does not have tilt switches.
a beam of light, the upper portion being transformers and connector kits.
white, the lower red. As the pilot’s vertical Above ground mounting hardware
position changes, the color of the light as is included except 2 inch EMT for the
seen by the pilot changes instantaneously. legs. Order baseplates, transformer
bases, and all other below ground
The Style A PAPI uses a Power and Control items separately.
Unit (PCU) which has a photocell for
automatic day/night intensity control. The A – –
PCU can be operated by using an L-854
radio controller signaled by an approaching
Fixture Type:
aircraft. The Style B PAPI is powered by an
880 = 4 Units
L-828 constant current regulator.
881 = 2 Units
Features Model:
PAPI UNIT
• ETL Certified Lamps:
• 1500 Hour Lamps 2 = 2 Lamps per Unit
• Meets ICAO Recommendations 3 = 3 Lamps per Unit
• Sharp Signal Transition: 3 Minutes of Arc
• Precise Setting Tool:  ±2 Minutes of Arc Style:
A = 208V to 240V
• Lamp Bypass Circuit (Style B)
B = 6.6A
• Tilt Switch Indicator Lights (Style B)
Temperature Class:
POWER AND CONTROL UNIT(PCU) 1 = –35°C
(Style A) 2 = –55°C
• Power Circuit Breaker
• Adjustable Power Supply - Options:
195 to 265 VAC 11 = ICAO (temperature class 2 only) (see above example)
• 50 Hz or 60 Hz Operation 12 = Interlock with series circuit, day operation without runway on*
• Indicator Lights: 13 = Interlock with series circuit with runway on only*
Internal D.C. Power Supply Operation 16 = Protective lens cover
Remote Control Status 21 = Grounded Transformers­—No Tilt Switch
Tilt Switch Status
Lamp Circuit Overvoltage * Style A only
Photocell Status
Main Contactor Status Note: Order one clinometer (aiming device) 25220 separately.
High Intensity Mode
Remote Control Override

www.chalp.com
3.2
Installation Information
Note: See Advisiory Circular *15’ ± 5’ May be reduced
AC150/5345-28 (latest revision) L-881 to 30’ on
Non Jet Runways,
for complete siting information. General Aviation Only

Runway
PCU

25’ ± 5’ +  10’
Typical -   0’
8m 50’
50’ PAPI Unit 17 m
L-880
17 m L-880, L-881

*Non Jet Runways

Direction
of
Suggested PAPI System Layout Approach

Typical Wiring Diagram: FAA Style A

Power & PAPI PAPI PAPI PAPI

Control Unit Unit Unit Unit
Unit

Incoming
Power.
208 - 240V,
60 Hz
or 220V, 50 Hz

1 = Consolidating Harness (supplied) Indicates Field Waterproof

2 = Outgoing Power Feed from Power & Control Unit - Customer Splice
#8 AWG min (not supplied)
3 = Power Feed from previous PAPI Unit -
#14 AWG min (not supplied)
4 = Tilt Switch Leads - #14 AWG min (not supplied)

Typical Wiring Diagram: FAA Style B (2-Lamps)

Approach & Navigational Aids

PAPI PAPI PAPI PAPI
Unit Unit Unit Unit
Indicates (Master) (Slave) (Slave) (Slave)
Secondary Plug

Indicates
Secondary
Receptacle Indicates
Field Waterproof
Customer Splice
Indicates
Primary Plug Indicates
Primary
Receptacle

Incoming
Power.
6.6 Amps
Constant
Current

1 = 300W, 6.6/6.6A Isolation Transformer 33010 (supplied)

2 = 200W, 6.6/6.6A Isolation Transformer 33006 (supplied)
3 = Consolidating Harness (supplied)
4 = Power Leads with L-823 Connectors - Cable #8 AWG (not supplied)
(L-823 Connector Kits supplied)
5 = Tilt Switch Leads #14 AWG min (not supplied)

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 3
 Outline Drawings AIRPORT LIGHTING PRODUCTS

POWER & CONTROL UNIT (PCU)

(Style A System Only)
SIDE VIEW PAPI Light Unit

Photoelectric SIDE VIEW

Control
37.7 (957)

Hasp for 7.9

Removable (200)
Top Cover

Light Output

Light Unit with

200 watt lamps

2 Inch EMT
(not supplied)
Flexible Liquid-tight
Conduit & Wiring
(included)

Breakable Baseplate
Coupling (order Frangible Floor Flange
60683-9 separately) Coupling 25684
61062-1
Support Leg (2)
   2 Inch EMT 10037-533 Plug & Wire Concrete Pad
   (not supplied) (9.5 foot length)
Power Conduit (2)
2 Inch EMT
(not supplied)

Consolidating Harness
(Style B shown)

FRANGIble
Coupling
Floor Flange L-867 Base
16˝ or 24˝ Deep
(order separately)

PCU FOOTING PLAN Note: L-867 Base may be located anywhere

within reach of the cable assembly.

6” Outside Diameter
25684-1 Floor
Flange
PAPI UNIT FOOTING PLAN

E 4 Holes 6” (152) Outside Diameter

L-867 Base
.625” Note: L-867 Base may be located 16” or 24” Deep
(15.9) anywhere within reach of the 4 Holes
2.75 7.0 (order sepa-
D Diameter cable assembly. .625” (15.9)
(70) (178) rately)
Equally Diameter
spaced Equally spaced
on a 4.75” on a 4.75” (12)
(12) C Bolt Circle
Conduit Elbow 2” Bolt
(not supplied) Circle A
6.8
(172)

Note: PCU mounting height is not specified. 25684-1

It is recommended to minimize the mounting height. Floor Flange
The PCU may be wall mounted.
16.0 B
12” (305) Baseplate with (406)
2” Hub
Mounted on L-867B Light
Base
(order separately)

Footing Dimensions Chart

Inches (Millimeters) A B C D E
PAPI Light Unit 2-Lamp 15.75 (400) 25.75 (654) 7.9 (200) – –
PAPI Light Unit 3-Lamp 22.50 (572) 25.75 (654) 11.25 (286) – –
PCU for 8803A Systems – – – 18.0 (457) 5.5 (140)
All other PCU’s – – – 10.0 (254) 1.5 (38)

www.chalp.com
3.4
 Dimensions: inches
(mm)
Instruction Manual 2438 (2-Lamp)
2439 (3-Lamp)

Light Unit (2)* Light Unit (3)* PCU

Shipping Weight:   75 lbs. 100 lbs. 105 lbs.
  34 kg. 45 kg.  48 kg.

Shipping Volume: 9.3 cu.ft. 12 cu.ft.  3.7 cu.ft.

0.26 cu.m. 0.34 cu.m. 0.10 cu.m.

Photometric Data: Contact Field Services

3-Lamp Light Unit
*Each Unit

Accessories
Catalog Shipping Weight Shipping Volume
Number Item Description lb. kg. cu.ft. cu.m.

AP1932 Baseplate, 2” Hub 8 3.6 .14 .004

21242Q200301 Base L-867, class I, 24” deep 52 23.6 2.6 .074
25220 Clinometer/Tilt Level

Renewal Parts
Part Number Description Part Number Description

PAPI UNIT PCU

10047-2896 Lamp 200W 27045 Photocell Assembly
40749 Lamp Socket 27138-1 Power & Control Unit (PCU) PC
27069 Red Filter Board Standard with no Options
31329 Transformer T1 27138-3 Power & Control Unit (PCU) PC
60683-9 Breakable Coupling (1 per Unit) Board with Options “12”
61062-1 Breakable Coupling (3 per Unit) 10047-2901 Relay K1,K2
25684-1 Floor Flange (3 per Unit) 27039 Transformer T1, 900VA
10037-533 Plug 4-Pin with 4-Conductor wire 9.5’ 27038 Transformer T1, 1800VA
25225-1 Tilt Switch (Class 1) 27120 Transformer T1, 2800VA
25225-3 Tilt Switch (Class 2, Style B) 10047-885 Lightning Arrestor
25225-4 Tilt Switch (Class 2, Style A) 10047-1005 Fuse F1
33010 Isolation Transformer 300W (Style B) 10047-1143 Fuse F2
33006 Isolation Transformer 200W (Style A) 25684-1 Floor Flange (2 per PCU)
33004 Isolation Transformer 100W (Style B) 61062-1 Frangible Coupling (4 per PCU)
27123-1 Tilt Switch Control Board (2-Lamp)
27123-2 Tilt Switch Control Board (3-Lamp) SPARE PAPI UNITS:

Approach & Navigational Aids

27123-3 Tilt Switch Control Board (3-Lamp) (Without Harness & Mounting Hardware)*
10037-534 Consolidating Harness Style A 2-Lamp 3-Lamp
27068-1 Consolidating Harness Style B - FAA (2-Lamp) 27178-1 27179-1 Style A, Class 1
27068-2 Consolidating Harness Style B - ICAO 27178-2 27179-2 Style A, Class 2
27068-3 Consolidating Harness Style B - FAA (3-Lamp) 27178-3 27179-3 Style B, Class 1 (Master)
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D. 27178-4 27179-4 Style B, Class 2 (Master)
27178-5 27179-5 Style B, Class 1 (Slave)
27178-6 27179-6 Style B, Class 2 (Slave)
27178-7 27179-7 Style A, Option 11
27178-8 27179-8 Style B, Option 11

* For complete 2-Lamp units, order 27170.
* For complete 3-Lamp units, order 27175.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 5
 REIL
AIRPORT LIGHTING PRODUCTS

Runway End Identifier

Lights
Compliances: FAA/AC 150/5345-51; L-849 A,B,E,F
ICAO Annex 14
Transport Canada Specification K 312 REIL
Applications Ordering Information
The primary application of a How to Order: To the Basic Catalog Number, add the symbols for FAA Style and
REIL system is to positively identify Input Power, as shown below. Add Option numbers as required.
the end or the threshold of a visual or
instrument non-precision runway. F T S 2
This REIL system consists of two
synchronized flashing lights. One Fixture Type:
flasher unit is located at each side of
the runway threshold. Beam Orientation:
4 = Omni Directional (FAA Style B,F)
Features 8 = Uni Directional (FAA Style A,E)
• ETL Certified
• CSA Certified Input Type:
1 = Voltage operated with internal (SC 415) controller**
• Easy to install – each REIL unit consists 3 = Current (series) operated
of a flash head and a control box,
mounted on the same support leg(s). Voltage* (Input Type 1 Only):
• Easy to maintain – special tools 240 = 240 V. 60 Hz
are not required. 230 = 230 V. 50 Hz
• Does not require separate control
* For optional 120 V, 60 Hz consult factory
cabinet – REIL Master Unit with integral FTS SERIES products are manufactured by Flash Technology, Franklin, TN.
system control. ** For optional current sensing control of the voltage operated REIL, also order FTC-435
Controller and (1) 30/45W isolation transformer
• Elapsed time meter
• Safety interlock in each control box Technical Data
and flash head.
Instruction Manual: FTS 400/800
• Weather resistant – painted parts FTS 430/830
are coated with U.V. resistant paint, Primary Power:
electrostatically applied. Voltage Unit, 240VAC +10% 60Hz  / 230VAC +10% 50Hz , 1 Phase
Current Unit, Direct connect to secondary of standard FAA type L830
NOTE: Each current (series circuit) operated
REIL must be powered by a dedicated
Isolating Transformer
4kW (minimum) constant current 120 Watts (High) 85 Watts (Med) 65 Watts (Low)
regulator. 300 Volt Amperes (High Intensity)
Effective Intensity:
Style A, E = 20,000, 2000, 450 effective candelas.
Style B, F = 300 ± 50%, 1,500 ± 5% and 5,000 ± 5% effective candelas
Flash Rate:
60 Flashes per minute (400)
120 Flashes per minute (800)
Beam Pattern:
Omnidirectional coverage: 360 degrees horizontal, 8 degrees vertical
Unidirectional coverage: 30 degrees horizontal, 10 degrees vertical

www.chalp.com
3.6
Outline Drawings

FTS 8 Series Co-Mounted

Uni Directional

FTS 4 Series Co-Mounted

Omni Directional

Renewal Parts
Part Number Description Part Number Description

Approach & Navigational Aids

8384329 Flashtube (FH 400) 2711402 HV Rectifier Board
8901701 Flashtube (FH 800) 8900494 Relay, mode (K1, K2)
8743701 Lens (FH 400) 2730300 Timing & Trigger Board
8288201 Trigger Transformer (FH 400, FH 800) 2458005 HV Rectifier Board (Voltage)
33010 300W 6.6/6.6A Isolation Transformer 2652318 Timing & Trigger Board (Voltage)

For additional replacement parts contact factory

Shipping Weights and Volumes

Shipping Weight Shipping Volume
REIL Catalog Number Lbs. Kg. Cu.Ft. Cu.M.

FTS 4 Series 29 13.1 37 1.048

FTS 8 Series 25 11.3 37 1.048

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 7
 ALSF
AIRPORT LIGHTING PRODUCTS

Flasher System
Compliances: FAA AC 150/5345-51
SSALR (Type I)
ICAO ANNEX 14
TRANSPORT CANADA K312 ALSF
Applications Ordering Information
Precision approach to runway in *
visibility conditions where the runway F T S 8 – –
visual range (RVR), is less than one-
half mile requiring steady-burning
approach lights with sequence Fixture Type:
flashing lights.
The system consists of a master Input Power:
controller for monitoring and 1 = Voltage operated with
individual flashing lights that can be internal controller
incorporated with steady burning 3 = Current (series) operated
lights to create various types of
approach light systems such as the Flashing Lights:
classic 21-position ALSF-1 or ALSF-2. Insert Number of Flashers
Needed (30 Maximum)
Flashhead and power converter
may be mounted as one unit or
Input Power:
individually to meet local terrain
120 = 120 V. 60 Hz
needs. Inset (surface mount) flashers
240 = 240 V. 60 Hz
are also available.
230 = 230 V. 50 Hz
Other parts of the system, such as
steady burning lights, towers, light * FTS Series product are manufactured by Flash Technology, Franklin, TN.
bases, transformers and regulators
must be ordered separately.

Features
• ETL Tested and Verified • NEMA 4 outdoor cabinet with locking
provisions
• Real-time dynamic fault detection and
isolation • -55°C to +55°C operation
• Elapsed time metering • Remote tower and vault control panels
(user-setable alarms) available
• Standard input voltages 60 Hz • Computer-control compatible
120 V, 240 V, 50 Hz-230 V (dry contacts)
• Micro-processor control • 120 Flashes per minute
(factory calibrated)
• Transient protection
• LED display
• Monitoring and dimming capability
• FTC183 25 Watts, Average power
• Local and remote control operation consumpiton
• High-intensity default and failure • Can be installed up to 2500’
detection, and caution indication from the approach system

www.chalp.com
3.8
Outline Drawings
FRONT VIEW

19(482.6)

4.50(114.3) 10.0(254) 4.50(114.3)

Ø0.44(11.1) Ø0.44(11.1)

Ø0.05(12.7)

17.8(447.5)

16.0(406.4) 18.8(478)

Ø0.44(11.1) Ø0.44(11.1)

25.9(658)

Approach & Navigational Aids

Ø0.75(19) Ø0.75(19) Ø1.06[(26.99)] Ø0.75(19) 6.0(153)

Standard Sequence Flasher System

BOTTOM VIEW
Components
Item* Part Number
Instruction Manual: FTC 183 / FTC 435
Fuse, Power, MDL2A  900342
4
Master Flasher
Timer Power Supply PCB100 Control Board 2471912
Shipping Weight: 29. lbs. 25. lbs. VRI Varistor 120 V 6901079
13. kg 11.3 kg Relay, Alarm 4900501
PCB200 Panel Board 2472001

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 9
 ARB
AIRPORT LIGHTING PRODUCTS

Airport Rotating Beacon

Compliances: FAA AC 150/5345-12: L-801 & L-802
ICAO Annex 14
TRANSPORT CANADA K312 ARB
Features Ordering Information
• ETL Certified
_ _
• FAA Approved: L-801 400W
L-802 1000W
Fixture Type:
• Metal Halide Lamp (included): 801 = L-801 Medium Intensity
400W for medium intensity beacons 802 = L-802 High Intensity
1000W for high intensity beacons
Application**:
• Long Lamp Life
A = Airport: White/Green
• No Lamp Changer S = Seaplane: White/Yellow
• Simple Design with few moving parts H = Heliport: White/Green/Yellow

• Light weight for easy handling Class:

1 = -35˚C
Outline Drawing 2 = -55˚C*

Power:
1 = 120V, 60Hz
2 = 220V, 50Hz

Options:
Lens
Lens
BC = Low-Angle Beam Cutoff 2˚
TR = Tell-Tale Relay with 250W Quartz Lamp
WW = Two White Lenses
WWG = Two White Lenses and One Green Lens***
19.4 36.8
(493) (835) * All Class 2 ARB’s require the TR option
** Standard Application – Options Available
*** Not intended for military use, reference UFC 3-535-01
Renewal Parts
Part Number Description

10047-1802 Lamp, 400W Metal Halide (801XX)

29.9
(760) 10047-2795 Lamp, 1000W Metal Halide (802XX)
10047-2293 Tell-Tale Lamp, 250W Quartz (Option TR)
65020-1 Clear Lens (1000W ARB)
65020-2 Green Lens
Mounting 6.0 65020-4 Clear Lens (400W ARB)
Channel (152) 65045 Relay Assembly, TR option
65020-3 Yellow Lens
Junction Box Fuse 65018 Gearing Assembly
1/2≤ N.P.T. Hub 65057 Motor Assembly
Mounting Channel Bolt Hole Pattern 65058-1 Ballast Assembly, 1000W, 120V, 60Hz
65058-2 Ballast Assembly, 1000W, 220V, 50Hz
65058-3 Ballast Assembly, 400W, 120V, 60Hz
Hole (4) 65058-4 Ballast Assembly, 400W, 220V, 50Hz
for 3/8” 10047-2344 Fuse, F1
17.5
Bolt (not (445)
included) inches
Dimensions: Shipping Weight: 243 Lbs.
(mm)
110 kg.
Not to Scale
16.0 Instruction Manual: 9218 (802XX) Shipping Volume: 47.5 cu.ft.
(406) 9301 (801XX) 1.345 cu.m.

www.chalp.com
3 . 10
Photometric Data

ELEVATION vs EFFECTIVE INTENSITY

L-802A/S, 1000W, 2 LENS BEACON, WHITE LENS
ELEVATION vs EFFECTIVE INTENSITY
L-802A/S,
1,000 CD1000W, 2 LENS BEACON, WHITE LENS
20
1,000 CD
20 TYPICAL
(DEGREES)

5,000 CD
16
TYPICAL
(DEGREES)

5,000 CD
16 REQUIRED
12
REQUIRED
37,500 CD
12
ELEVATION

75,000 CD
8 37,500 CD
ELEVATION

75,000 CD
8
4

4 37,500 CD
0
37,500 CD
0 0 20 40 60 80
EFFECTIVE INTENSITY (CANDELAS X1000) Notes:
0 20 40 60 80 1. Beacon Rotates:
– 12 RPM @ 60Hz
EFFECTIVE INTENSITY (CANDELAS
ELEVATION vs EFFECTIVE INTENSITY X1000) – 10 RPM @ 50Hz
L-801H, 400W, 3 LENS BEACON, WHITE LENS 2. Flash Rate: (L-801H)
ELEVATION vs EFFECTIVE INTENSITY – 36 Flashes/min @ 60Hz
L-801H, 400W, 3 LENS BEACON, WHITE LENS
1,000 CD
– 30 Flashes/min @ 50Hz
20
3. Flash Rate: (L-802 A/S)
1,000 CD - 24 Flashes/min @ 60Hz
20 - 20 Flashes/min @ 50Hz
(DEGREES)

16 5,000 CD
(DEGREES)

16 5,000 CD TYPICAL
12
12,500 CD
TYPICAL
12
ELEVATION

25,000 CD
8 12,500 CD
REQUIRED

Approach & Navigational Aids

ELEVATION

25,000 CD
8
4 REQUIRED

4 12,500 CD
0
12,500 CD
0 0 20 40 60 80
EFFECTIVE INTENSITY (CANDELAS X1000)
0 20 40 60 80
EFFECTIVE INTENSITY (CANDELAS X1000)
PHOTOMETRIC DATA
PHOTOMETRIC DATA

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 11
 EAL
AIRPORT LIGHTING PRODUCTS

Elevated
Approach Light
Compliances: FAA Specification FAA-E-982*
ICAO Annex 14 EAL
Transport Canada Specification K-302 (98240-G-500-Unit Shown)

Applications Ordering Information

The EAL is a unidirectional elevated How to Order: To the basic catalog Examples:
light which may be used as a clear number, add the symbols for Color, 98240-C-200 is a clear approach light
or red approach light, a red end of Lamp type, Cable Assembly and with a 200 watt lamp, less cable.
runway light, and a green threshold Options (if any). A frangible coupling 98240-G-500-20 is a green threshold
light. For more information, refer to may be required for proper mounting light with a 500 watt lamp and
the Application/Fixture Selection and must be ordered separately. 6.5’ (2m) long 20 amp cable.
Table on page 3.14.
Features
• Meets FAA photometric requirements, 9 8 2 4 0
using standard PAR 56 lamps, as
specified in FAA-E-982 document.
Fixture Type:
• Suitable for replacement of MB-2
MILSPEC MIL-L-26990 lights per
Light Color:
U.S. Air Force AFR 88-14.
C = Clear (No Filter or Clips)
• Easy to install - mounts on a standard R = Red, Absorption Filter with Clips
2” EMT (50mm pipe) and a frangible G = Green, Absorption Filter with Clips
coupling or approach mast mounted. DR = Red, Dichroic Filter with Clips
• Sturdy filter clips - resist high winds DG = Green, Dichroic Filter with Clips
and jet blasts.
• Cast aluminum housing.
Lamp Type:
200 = 200 Watts, 6.6 Amp, PAR-56
• Easy to relamp - 300 = 300 Watts, 20 Amp, PAR-56
special tools are not required. No symbol means no lamp is included
• Easy to aim - uses precise aiming
device** with digital readout. Cable Assembly:
66 = 6.5 Feet (2 meters) Long Cable, 6.6 Amp Rated with L-823 Plug
• Shipped fully assembled. 20 = 6.5 Feet (2 meters) Long Cable, 20 Amp Rated, with L-823 Plug
No symbol means a cable is not included

Options:
10 = Mounting Kit (consist of 61062-1 Frangible Coupling and
25003 Cable Clamp Assembly).
11 = Ground Wire

* With Exception of the Weight.

** Order 50133 aiming device separately (one per facility).

www.chalp.com
3 . 12
Photometric Data

2,000 CD MINIMUM
1,000 CD MINIMUM
10,000 CD MINIMUM
20,000 CD AVERAGE (ACTUAL AVERAGE - 22,038 CD SHOWN)

24
VERTICAL ANGLE

16 2,000 CD

10,000 CD

15,000 CD
8
20,000 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in white light

APPROACH CENTERLINE & CROSS BAR WHITE LIGHT - 200 WATTS

(ICAO FIGURE 2.1)

250 CD MINIMUM
500 CD MINIMUM
2,500 CD MINIMUM
5,000 CD AVERAGE (ACTUAL AVERAGE - 5,338 CD SHOWN)

24
VERTICAL ANGLE

16 500 CD

2,500 CD

5,000 CD
8

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in red light

APPROACH SIDE ROW RED LIGHT - 200 WATTS

(ICAO FIGURE 2.2)

Approach & Navigational Aids

500 CD MINIMUM
1,000 CD MINIMUM
5,000 CD MINIMUM
10,000 CD AVERAGE (ACTUAL AVERAGE - 17,918 CD SHOWN)

24
VERTICAL ANGLE

16 5,000 CD

10,000 CD

15,000 CD
8

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in green light

THRESHOLD GREEN LIGHT - 200 WATTS

(ICAO FIGURE 2.3)

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 13
 AIRPORT LIGHTING PRODUCTS

500 CD MINIMUM
1,000 CD MINIMUM
5,000 CD MINIMUM
10,000 CD AVERAGE (ACTUAL AVERAGE - 17,006 CD SHOWN)

24

1,000 CD
VERTICAL ANGLE

16 2,500 CD
5,000 CD
10,000 CD
20,000 CD
8

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in green light
THRESHOLD WING BAR GREEN LIGHT - 200 WATTS
(ICAO FIGURE 2.4)

125 CD MINIMUM
250 CD MINIMUM
1,250 CD MINUMUM
2,500 CD AVERAGE (ACTUAL AVERAGE - 5,584 CD SHOWN)

12

1,250 CD
VERTICAL ANGLE

2,500 CD
8

5,000 CD
4

-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE CD = Candelas in red light
RUNWAY END RED LIGHT - 200 WATTS
(ICAO FIGURE 2-8)

APPLICATION/FIXTURE SELECTION TABLE

Application Compliances Catalog Number

White, Approach Centerline and Cross ICAO, USAF/NAVY, NATO, FAA 98240-C-200-66
Bar Light 98240-C-300-20
Red, Approach Side Row Light ICAO, USAF/NAVY, NATO, FAA 98240-DR-200-66
Green, Runway Threshold and Wing ICAO, USAF/NAVY, NATO, FAA 98240-DG-200-66
Bar Light
Red, Runway End Light ICAO, USAF/NAVY, NATO, FAA 98240-R-200-66

www.chalp.com
3 . 14
 CAPTIvE SCREW
Outline Drawing PAR-56 SoCkET
P
HouSInG ASSy LEnS

LAMP
Instruction Manual: 9701

LAMP CLAMP

BoLT
LT, SLIPFITTER
SLIPFITTER
LEAd ASSEMBLy
L
Accessories
Shipping Weight Shipping Volume
Part Number Description Lbs. Kg. Cu.Ft. Cu.M.

61062-1 Breakable Coupling with Compression Fitting 1 0.5 0.03 0.001

AP1932 Baseplate, 2” Hub, 12” Diameter 8 3.6 0.14 0.004
AP2932 Baseplate, 2” Hub, 16” Diameter 14 6.4 0.14 0.004
AC21242H200301 Base L-867B, Class I, 24” Deep 52 23.6 2.6 0.074
AC63242H200301 Base L-867D, Class I, 24” Deep 87 30.4 4.3 0.122
33006 Transformer L-830-6, 200 watts 6.6/6.6A 8.9 4.04 0.3 0.009
33007 Transformer L-830-7, 200 watts 20/6.6A 8.9 4.04 0.3 0.009
33008 Transformer L-830-8, 300 watts 6.6/20A 15.0 6.8 0.7 0.019
33009 Transformer L-830-9, 300 watts 20/20A 17.2 7.8 0.7 0.019
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.
823KP-D3-D3 Connector Kit L-823, 6 AWG, .32” to .43” O.D.
10047-2154 Heat Shrink Kit (1-piece)
10047-1425 Heat Shrink Kit (2-piece)
50133 Aiming Device

Renewal Parts
Part Number Description Part Number Description

50115-1 Housing Assembly 50135 Lead Assy., 20A, 6.5’ (2m) Long
42381-1 Lamp Clamp (without Filter) 50252 PAR-56 Socket
42381-3 Lamp Clamp (with Filter) 10037-754 #6-32 Captive Screw
ML4265 Lens, Absorption Red 40941 Lamp, PAR-56, 200 watts, 6.6A
ML4266 Lens, Absorption Green 10047-684 Lamp, PAR-56, 300 watts, 20A
41360-R* Lens, Dichroic Red 10A10-025D32 Bolt, Slipfitter
41360-G* Lens, Dichroic Green
50106 Slipfitter (Less Bolts)
50136 Lead Assy., 6.6A, 6.5’ (2m) Long

Approach & Navigational Aids

* Should be used with 200W fixtures.

Shipping Weights and Volumes

Shipping Weight Shipping Volume
Catalog Number Lbs. Kg. Cu.Ft. Cu.M.

98240-C-200 (or 300)-66 (or 20) 5.5 2.5 0.70 0.020

98240-R (or G)-200 (or 300)-66 (or 20) 7.0 3.2 0.70 0.020

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 15
 EALK
AIRPORT LIGHTING PRODUCTS

Elevated Approach Light/

PK-30 Type
Compliances: ICAO Annex 14
Transport Canada Specification K-302 EALK
Applications Ordering Information
The EALK is a unidirectional elevated How to Order: To the basic catalog Examples:
light which may be used as a clear number, add the symbols for Color, 98250-C-200 is a clear approach
or red approach light, a red end of Lamp type, Cable Assembly and light with a 200 watt lamp.
runway light, and a green threshold Options (if any). A frangible coupling 98250-G-200-66 is a green
light. may be required for proper mounting threshold light with a 200 watt
and must be ordered separately. lamp and 6.5’ (2m) long 6.6 amp
Features cable.

• Suitable for replacement of MB-2 lights

9 8 2 5 0
per U.S. Air Force AFR 88-14.
• Uses PK-30d low power consumption
lamps.
• Easy to install - mounts on a standard Fixture Type:
2” (50mm) pipe and a frangible coupling
or approach mast mounted. Light Color:
• Easy to relamp - special tools are not C = Clear Lens
required. R = Red Lens
G = Green Lens
• Cast aluminum housing.
• Easy to aim - uses precise aiming device* Lamp Type:
with digital readout. 100 = 100 Watts, 6.6 Amp, PK30d
• Sealed colored lens - eliminates need for 150 = 150 Watts, 6.6 Amp, PK30d
filter and clips. 200 = 200 Watts, 6.6 Amp, PK30d
No symbol means a lamp is not included.
• Shipped fully assembled.
Cable Assembly:
66 = 6.5 Feet (2 Meters) Long Cable, 6.6 Amp Rated with L-823 Plug
No symbol means a cable is not included.

Options:
10 = Mounting Kit (Consist of 61062-1 Frangible Coupling and
25003 Cable Clamp Assembly).
11 = Ground Wire

* Order 50133 aiming device separately (one per facility).

www.chalp.com
3 . 16
Photometric Data 1000 CD MIN.

2000 CD MIN. 10,000 CD MIN.

20,000 CD AVG. (Actual Average – 22,377 CD Shown)

24

2,000 CD
5,000 CD
VERTICAL ANGLE

16 10,000 CD
15,000 CD
20,000 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in white light
APPROACH CENTERLINE & CROSS BAR WHITE LIGHT - 200 WATTS
(ICAO FIGURE 2.1)

250 CD MIN.
500 CD MIN.

2500 CD MIN.
5000 CD AVG. (Actual Average – 9,901 CD Shown)

24

250 CD
500 CD
VERTICAL ANGLE

16 2,500 CD
5,000 CD
7,500 CD
10,500 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in red light
APPROACH SIDE ROW RED LIGHT - 200 WATTS
(ICAO FIGURE 2.2)

Approach & Navigational Aids

500 CD MIN.
1000 CD MIN.

5000 CD MIN.
10,000 CD AVG. (Actual Average – 11,747 CD Shown)

24

1,000 CD
5,000 CD
VERTICAL ANGLE

16 7,500 CD
10,000 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in green light
THRESHOLD GREEN LIGHT - 150 WATTS
(ICAO FIGURE 2.3)

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 17
 500 CD MIN.
1000 CD MIN. AIRPORT LIGHTING PRODUCTS
5000 CD MIN.
10,000 CD AVG. (Actual Average – 10,893 CD Shown)

24

500 CD
1,000 CD
VERTICAL ANGLE

16 5,000 CD
7,500 CD

10,000 CD

-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE CD = Candelas in green light
THRESHOLD WING BAR GREEN LIGHT - 200 WATTS
(ICAO FIGURE 2.4)
125 CD MIN.
250 CD MIN.

1250 CD MIN.
2500 CD AVG. (Actual Average – 5,884 CD Shown)

12

1250 CD
2,500 CD
VERTICAL ANGLE

8
5000 CD

-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE CD = Candelas in red light
RUNWAY END RED LIGHT - 100 WATTS
(ICAO FIGURE 2-8)

APPLICATION/FIXTURE SELECTION TABLE

APPLICATION (ICAO, USAF, NATO, U.S. NAVY) CATALOG NUMBER

White, Approach Centerline and Cross Bar Light 98250-C-150-66*
98250-C-200-66*
Red, Approach Side Row Light 98250-R-150-66*
98250-R-200-66*
Green, Runway Threshold Light 98250-G-150-66
98250-G-200-66*
Green, Runway Threshold Wing Bar Light 98250-G-200-66*
Red, Runway End Light 98250-R-100-66

* Confirmed by CSA Letter of Attestation.

www.chalp.com
3 . 18
Outline Drawing
REAR CovER
Instruction Manual: 9702 HouSInG ASSy

LEnS
LAMP
LEnS
SEAL

SLIPFITTER
BoLT
LT, SLIPFITTER

LEAd ASSEMBLy
L

Accessories
Shipping Weight Shipping Volume
Part Number Description Lbs. Kg. Cu.Ft. Cu.M.

33004 Isolation Transformer, 100 watts, 6.6/6.6A 8.6 3.9 0.3 0.009
33005 Isolation Transformer, 100 watts, 20/6.6A 8.6 3.9 0.3 0.009
33150 Isolation Transformer, 150 watts, 6.6/6.6A 8.9 4.04 0.3 0.009
33006 Isolation Transformer, 200 watts, 6.6/6.6A 8.9 4.04 0.3 0.009
33007 Isolation Transformer, 200 watts, 20/6.6A 8.9 4.04 0.3 0.009
61062-1 Breakable Coupling with Compression Fitting 1 0.5 0.03 0.001
AP1932 Baseplate, 2” Hub, 12” Diameter 8 3.6 0.14 0.004
AC21242H200301 Base L-867B, Class I, 24” Deep 52 23.6 2.6 0.074
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43” O.D.
50133 Aiming Device
10047-2154 Heat Shrink Kit (1-piece)
10047-1425 Heat Shrink Kit (2-piece)

Renewal Parts
Part Number Description Part Number Description

50115-2 Housing Assembly 50136 Lead Assy., 6.6A, 6.5’ (2m) Long
50124 Rear Cover Assembly 50126 Lens Seal
50256 Lens, Absorption Clear 10047-2138 Lamp, PK30d, 100 watts, 6.6A
50251-R Lens, Absorption Red 10047-2310 Lamp, PK30d, 150 watts, 6.6A
50251-G Lens, Absorption Green 10047-2477 Lamp, PK30d, 200 watts, 6.6A

Approach & Navigational Aids

50106 Slipfitter, Less Hardware 10A10-025D32 Bolt, Slipfitter

Shipping Weights and Volumes

Shipping Weight Shipping Volume
Catalog Number Lbs. Kg. Cu.Ft. Cu.M.

98250-C (or R or G) -100 (or 150 or 200)-66 4.5 2.04 0.70 0.020

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 19
 IAL
AIRPORT LIGHTING PRODUCTS

Inset Approach Light

Compliances: ICAO Annex 14: Figures A2-1, A2-2, A2-3, A2-4, A2-8

Applications Ordering Information

The IAL is an unidirectional inset
approach light, inset threshold light 8 5 0 6 – A – –
and inset end light compliant to ICAO
specifications. It is also a bidirectional Fixture Type:
ICAO threshold/end fixture. 850 = Runway
Features 6 = Model 6
• Low profile, .50˝ (12 mm) C-H Style:
• Few parts to stock A = ICAO Approach
• Easy to maintain –
no sealant required for prism ICAO Figures:
CS = Figure A2-1 – Clear, straight, unidirectional
• Pressure test plug for seal integrity
R2L = Figure A2-2 – 2 degree toe-left, red unidirectional
verification
R2R = Figure A2-2 – 2 degree toe-right, red unidirectional
• Long lamp life – G3L = Figure A2-3 – 3.5 degree toe-left, green unidirectional
Quartz Halogen, 105 W, 6.6 A G3R = Figure A2-3 – 3.5 degree toe-right, green unidirectional
G2L = Figure A2-4 – 2 degree toe-left, green unidirectional
G2R = Figure A2-4 – 2 degree toe-right, green unidirectional
RS = Figure A2-8 – Red, straight, unidirectional
GR* = G3L / RS – Bidirectional
RG* = G3R / RS – Bidirectional
GS = Green, straight, unidirectional
Shipping Weight: 17.0 lbs L-823 Connection:
7.7 kg
P1 = One plug P2 = Two plugs (GR and RG units only)
Shipping Volume: 0.6 cu ft
0.04 m3 Table 1
* Refer to the color symbol position:
XXX 62W 105W the red beam is always straight.
RG means right toe-in of the green beam.
CS – 3 GR means left toe-in of the green beam.
R2L – 3
Red Red
R2R – 3 Straight Straight

G3L – 2
G3R – 2 Runway
Centerline
G2L – 2
G2R – 2 Green Green
Left Right
Toe-in Toe-in
RS – 1
GR – 3
RG – 3
GS – 2

www.chalp.com
3 . 20
Typical Photometric Data
1000 CD MIN.
2000 CD MIN. 2500 CD MIN.
10,000 CD MIN. 5000 CD AVG 250 CD MIN.
20,000 CD AVG 500 CD MIN.

24
12

VERTICAL ANGLE
VERTICAL ANGLE

2500
16 8
2000

10,000 3000
8 4
20,000

0
0
-16 -12 -8 -4 0 4 8 12
-24 -16 -8 0 8 16 24
HORIZONTAL ANGLE
HORIZONTAL ANGLE
ICAO Fig. A2-1, 3 x 105W Lamp, White, Straight ICAO Fig. A2-2, 3 x 105W Lamp, Red, Toe-In (Toe Left Shown)

5000 CD MIN. 5000 CD MIN.

10000 CD AVG 500 CD MIN. 500 CD MIN.
1000 CD MIN. 10000 CD AVG 1000 CD MIN.

12 12
5000 1000
VERTICAL ANGLE
VERTICAL ANGLE

8 8

10000 5000
4 4

0 0
-16 -12 -8 -4 0 4 8 12 -16 -12 -8 -4 0 4 8 12
HORIZONTAL ANGLE HORIZONTAL ANGLE

ICAO Fig. A2-3, 2 x 105W Lamp, Green, Toe-In (Toe Left Shown) ICAO Fig. A2-4, 2 x 105W Lamp, Green, Toe-In (Toe Left Shown)

125 CD MIN.
250 CD MIN.
1250 CD MIN.
2500 CD AVG
10 1250
8
VERTICAL ANGLE

2500

Approach & Navigational Aids

3000

-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE

ICAO Fig. A2-8, 1 x 105W Lamp, Red, Straight

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 21
 Outline Drawing AIRPORT LIGHTING PRODUCTS

Lens
Lens Lamp
o-Ring Gasket
0.5 (12)
1.25
(32)

0.75
(19)

5.68
(144)

11.94 (303)

Dimensions: inches
(mm)

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24˝ Deep* 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33006 Isolation Transformer – 200 W, 6.6/6.6 A 19999 Lifting Tool
33007 Isolation Transformer – 200 W, 20/6.6 A 2421 Instruction Manual
33010 Isolation Transformer – 300 W, 6.6/6.6 A
33011 Isolation Transformer – 300 W, 20/6.6 A

Renewal Parts
Part Number Description Part Number Description

21128 Lamp – 105 W, 6.6 A 10035-33-273 Gasket – Bottom Cover

21321-G** Lens Replacement Kit – Green 10048-25 Gasket Lubricant – 5.3 oz. Container
21321-R*** Lens Replacement Kit – Red
21321-C**** Lens Replacement Kit – White

* Fixture with total lamp wattage greater than 150W should not be mounted on 12 inch diameter bases less than 20 inches (500mm) deep.
Class II bases are not recommended for this application.
** Includes 21276-G lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.
*** Includes 21276-R lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.
**** Includes 21276-C lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.

www.chalp.com
3 . 22
Notes

Approach & Navigational Aids

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 23
 IALE
AIRPORT LIGHTING PRODUCTS

Inset Approach Light

Compliances: Designed in accordance with FAA Specification
E-2952 for high intensity approach lighting applications and
FAA Specification E-2968 for
MALSR applications. ETL tested to meet photometric
requirements for FAA Specification E-2952 and
E-2968. Complies with UFC 3-535-01 specification.

Applications Ordering Information

The Crouse-Hinds IALE semi-flush
fixture is used in FAA high intensity 8 5 0 6 – A – –
approach lighting systems in the
runway overrun pavement. They are Fixture Type:
also used at other locations beyond 850 = Runway
the overrun that require a low profile 6 = Model 6
light fixture. The fixtures are
uni-directional and provide C-H Style:
applicable light beam colors of A = Approach
green for threshold, red for side row
barrettes and white for centerline FAA Specifications:
barrettes and crossbars. C52 = FAA-E-2952, Clear
Features C68 = FAA-E-2968, Clear
G52 = FAA-E-2952, Green
• Low profile, .50˝ (12 mm) G68 = FAA-E-2968, Green
• Few parts to stock R52 = FAA-E-2952, Red
• Easy to maintain –
no sealant required for prism UFC Specifications:
GX1 = UFC 3-535-01, Green Straight, Blank, Unidirectional
• Pressure test plug for seal integrity
GR2 = UFC 3-535-01, Green Straight, Red Straight, Bidirectional
verification
• Long lamp life – L-823 Connection:
Quartz Halogen, 105 W, 6.6 A P1 = One plug
P2 = Two plugs

Table 1
Shipping Weight: 17.0 lbs Straight Straight
7.7 kg XXX 105W

Shipping Volume: 0.6 cu ft C52 3

0.04 m3 G52 2 Runway
Centerline
Instruction Manual: 2623 (FAA) R52 3
2645 (UFC) Left Right
C68 1 Toe-in Toe-in

G68 2
GX1 2
GR2 3

www.chalp.com
3 . 24
 Typical Photometric Data
10000 CD MIN. 8000 CD MIN.
10
10

VERTICAL ANGLE
VERTICAL ANGLE

8
8
10,000
10,000 8,000
8,500
4
4

0
0
-12 -8 -4 0 4 8 12
-12 -8 -4 0 4 8 12
HORIZONTAL ANGLE
HORIZONTAL ANGLE
FAA-E-2968, 8506A-G68 2 x 105W Lamp, Green
FAA-E-2968, 8506A-C68 105W Lamp, White

10,000 CD
10,000 CD 8,500 CD 7,500 CD MIN. 6,400 CD 7,500 CD
1,500 MIN.
MIN. REQ’D

24 12
VERTICAL ANGLE

VERTICAL ANGLE
16 8

8 4

0 0
-18 -12 -6 0 6 12 18 -12 -8 -4 0 4 8 12
HORIZONTAL ANGLE HORIZONTAL ANGLE

FAA-E-2952, 8506A-C52 3 x 105W Lamp, White FAA-E-2952, 8506A-G52 2 x 105W Lamp, Green

800 MIN. 4,000 CD MIN. 3,400 CD 10,000 CD 5,000 CD MIN.

4,000 CD 1,000 CD MIN. 5,000 CD

12 12
VERTICAL ANGLE
VERTICAL ANGLE

8 8

10,000 CD MIN. AVG.

4 4

0 0

Approach & Navigational Aids

-12 -8 -4 0 4 8 12 -12 -8 -4 0 4 8 12
HORIZONTAL ANGLE HORIZONTAL ANGLE

FAA-E-2952, 8506A-R52 3 x 105W Lamp, Red UFC 3-535-01 2 x 105W Lamp, Green

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 25
 Outline Drawing AIRPORT LIGHTING PRODUCTS

Lens
Lens Lamp
o-Ring Gasket
0.5 (12)
1.25
(32)

0.75
(19)

5.68
(144)

11.94 (303)

Dimensions: inches
(mm)

Accessories
Catalog Number Item Description Catalog Number Item Description

AC24242Q200303 Base: L-868B, Class I, 24˝ Deep* 823KP-D4-D4 Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D.
33004 Isolation Transformer – 100 W, 6.6/6.6 A 10047-2154 Heat Shrink Kit – 1 Piece
33005 Isolation Transformer – 100 W, 20/6.6 A 10047-1425 Heat Shrink Kit – 2 Piece
33006 Isolation Transformer – 200 W, 6.6/6.6 A 19999 Lifting Tool
33007 Isolation Transformer – 200 W, 20/6.6 A 2421 Instruction Manual
33010 Isolation Transformer – 300 W, 6.6/6.6 A
33011 Isolation Transformer – 300 W, 20/6.6 A

Renewal Parts
Part Number Description Part Number Description

21128 Lamp – 105 W, 6.6 A 10035-33-273 Gasket – Bottom Cover

21321-G** Lens Replacement Kit – Green 10048-25 Gasket Lubricant – 5.3 oz. Container
21321-R*** Lens Replacement Kit – Red
21321-C**** Lens Replacement Kit – White

* Fixture with total lamp wattage greater than 150 W should not be mounted on 12˝ diameter base less than 20 inches (500mm) deep.
Class II bases are not recommended for this application.
** Includes 21276-G lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.
*** Includes 21276-R lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.
**** Includes 21276-C lens, 21277 lens boot, 21101 lens retaining gasket and gasket lubricant.

www.chalp.com
3 . 26
Notes

Approach & Navigational Aids

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 27
 ITAL
AIRPORT LIGHTING PRODUCTS

Inset Threshold and

Approach Light
Compliances: FAA AC 150/5345-46: L-850E
ICAO Annex 14: Fig. A2-1, A2-2, A2-3 & A2-4
UFC 3-535-01
U.S. Navy NAVAIR 51-50AAA-2: Fig. 5
NATO STANAG 3316: Fig. 1 & 2 ITAL
Applications Ordering Information
Example: 850EA-B-2-150-R-S-A is a
Known as the TriLite , the ITAL
TM
How to Order: Select the basic unidirectional red runway end light
does triple duty as an inset approach catalog number for the application with one operating 150 W lamp and
light, an inset threshold light, and an from Table A on the following page. one standby 150 W lamp. Upon
inset runway end light. The ITAL is a Add symbols for options as required. failure of the first lamp, power is
unidirectional light with one or two Order separately a single isolation automatically transferred to the spare
150 W lamps depending upon the transformer and a mounting base. lamp. The light operates on a single
application. It may be used for any See beam orientation diagram on 150 or 200 W isolation transformer
category ICAO or military runway and following pages. powered by a series circuit.
for FAA CAT I runways.
8 5 0 E A – B – – – – –
Features
• ETL Certified* Fixture Type:
• Meets USAF and ICAO photometric
requirements for threshold, end and Model:
approach lighting systems
• Metallic-Ceramic Coating for greatly Base Size:
increased corrosion resistance B = 11.25-inch Bolt Circle
• Common Optical System for all Number of Lamps:
applications 1 = 1 x Lamp 20710 6.6 A
• Dual-Light Channels with narrow 2 = 2 x Lamp 20710 6.6 A
windows
• Center Rib between windows resists Operating Wattage:
military tailhook damage 150 = 1 x 150 W**
300 = 2 x 150 W
• One-Piece 12-inch Casting resists
snowplow damage Color:
• Soft-Mount Optical System to resist C = Clear G = Green R = Red
shock damage
• Pressure Tested for watertightness Beam Orientation:
L2 = Left Toe-in 2 degree L3 = Left Toe-in 3.5 degree
• Single Plug Lead Assembly for use with R2 = Right Toe-in 2degree R3 = Right Toe-in 3.5degree
one isolation transformer S = Straight 0 degree
• Optional Standby Lamp Transfer to
reduce light maintenance for single Options:
lamp applications (Option - A) NM = High-Strength Casting
• Optional High Strength Casting: A = Standby Lamp (Series Circuit): Energizes standby lamp upon
2 times the tensile strength failure of operating 150 W lamp.**
of ductile iron
* Crouse-Hinds catalog number 850EA-B-1-150-G-S only.
** For Option A, select basic catalog number 850EA-B-2-150-X-XX-A.

www.chalp.com
3 . 28
Technical Data
Table A

Compliance Application** Color Catalog Number***

Threshold Green 850EA-B-2-300-☆-3
Threshold: Wing Bar Green 850EA-B-2-300-☆-2
ICAO Runway End Red 850EA-B-1-150-R-S
Approach: Centerline Barrette Clear 850EA-B-2-300-C-S
Approach: Side Row Barrette Red 850EA-B-2-300-R-☆-2
Threshold* Green 850EA-B-2-300-G-S
Runway End Red 850EA-B-1-150-R-S
Approach: Centerline Barrette Clear 850EA-B-2-300-C-S
NATO
Approach: Terminating Bar Red 850EA-B-2-300-R-S
Approach: Inboard Wing Bar Red 850EA-B-2-300-R-S
Approach: Side Row Barrette Red 850EA-B-2-300-R-S
Threshold* Green 850EA-B-2-300-G-S
Runway End Red 850EA-B-1-150-R-S
Approach: Centerline Barrette Clear 850EA-B-2-300-C-S
USAF
Approach: Terminating Bar Red 850EA-B-2-300-R-☆-2
Approach: Pre-Threshold Bar Red 850EA-B-2-300-R-☆-2
Approach: Side Row Barrette Red 850EA-B-2-300-R-☆-2
Threshold*: Category I Green 850EA-B-1-150-G-S
FAA
Runway End Red 850EA-B-1-150-R-S

* Includes Wing Bars.

** If the runway category is not noted, then the catalog number is used for all applicable categories.
*** Add options as required.
☆ Select equal quantities of left and right toe-in.

Approach & Navigational Aids

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 29
 Outline Drawings AIRPORT LIGHTING PRODUCTS

ITAL-850EA-B-2-300 Lens (2) Threaded

Top View Hole

Outside Diameter – 11.94 (303)

Bolt Circle Diameter – 11.25 (286)

Dual Light
Channels

Direction of
Light Output

Nameplate

Threaded
Hole

Side View (cutaway)

Color Filters (2) Lamp Assembly (2)

Lens (2)

.94 (23.9)
direction of
Light output

.75 REF (19.1)

.375 REF
(9.5)
Inner Cover
3.00” (76.2) Assembly
Gasket

9.94 dIA
A REF
(252.5) L-823 Plug

inches Beam Orientation* Diagram

Dimensions:  (mm)

Instruction Manual: 9013 Left Toe-in

Shipping Weight: 26.0 lbs

11.8 kg Runway
Centerline
Shipping Volume: 0.7 cu ft
0.02 m3 * The beam orientation is not field adjustable.
Right Toe-in

Photometric Data: Contact Field Services

www.chalp.com
3 . 30
 Application Notes
• Only the mounting bases listed below are approved for use with ITAL. Other bases must be explicitly
approved by Crouse-Hinds or the warranty is voided.
• Only the high quality paving sealants and epoxies listed in manual 9013 are suitable for use with ITAL.
• Beam orientation is achieved by the fixture casting bolt drilling pattern. Light bases are installed
with any two opposite bolt holes perpendicular to the runway centerline.
• The beam orientation is not field adjustable.
• There are two threaded holes 180° apart perpendicular to the centerline for attachment of lifting handle 19999.
• Install shallow base using setting jig 19583 (for base with light mounted) or 19583-2 (for base only).
• For FAA MALS with 240 V power, use isolation transformer 33300 for each 300 W ITAL or 33151 for
each 150 W ITAL.

Accessories
Catalog Shipping Weight Shipping Volume
Number Description Lbs Kg Cu Ft. M3

AC24242H200303 Base L-868, Size B, Class I* 63.0 28.6 2.5 .070

33150 Transformer, 150 W 6.6/6.6A 16.0 7.3 0.4 .011
33151 Transformer, 150 W 240 V/22.7 V (6.6 A lamp) MALS 16.0 7.3 0.4 .011
33010 Transformer, 300 W 6.6/6.6 A 23.0 10.4 0.6 .017
33011 Transformer, 300 W 20/6.6 A 23.0 10.4 0.6 .017
33300 Transformer, 300 W, 240 V/45.5 V (6.6 A lamp) MALS 23.0 10.4 0.6 .017
823KP-D4-D4 Connector Kit L-823, 8 AWG, .32” to .43”
10047-1425 Heat Shrink Kit
19999 Lifting Handle
20734 Lens Alignment Jig

* Sectional bases may be required depending upon the paving technique.

Renewal Parts
Part Number Description Part Number Description

20710 Lamp 150 W 6.6 A 10035-33-270 O-Ring, Inner Cover

20704-1 Lamp Bracket Assembly, 1 Lamp Unit 20984-1 Inner Cover Assembly, 150 W Versions
20704-2 Lamp Bracket Assembly, 2 Lamp Unit 20984-3 Inner Cover Assembly, 300 W Versions
20708-R Filter Assembly, Red 20984-4 Inner Cover Assembly, Option – A Versions
20708-G Filter Assembly, Green 21038 Lead/Plug Assembly
20707 Lens Assembly 10047-409 Film Disc Cutout (Option – A)
10048-25 Silicone Grease

Approach & Navigational Aids

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 31
 WC
AIRPORT LIGHTING PRODUCTS

Wind Cone
Compliances: FAA AC 150/5345-27: L-806 & L-807
NASAO Guidelines WC
Applications Ordering Information
A wind cone visually indicates prevailing wind
direction at a particular location on an airfield – –
or heliport. FAA Size 2 wind cones are used for
airports at a central position on the airfield. FAA
Size 1 rigid wind cones are installed at small Basic Catalog Number:
airfields and heliports. FAA Size 1 frangible Select from the chart below
wind cones are called ‘‘supplemental wind
cones’’ as they are installed in addition to the Windsock Color:
main wind cone adjacent to each runway W = White
touchdown zone to indicate local wind O = Orange
conditions. Wind cones are commonly supplied
with a single obstruction light and four Windsock Material:
floodlights to illuminate the windsock. N = Nylon
The customer may select lighting, windsock
color, and windsock material without affecting Options:
FAA approval. Rigid wind cones use hinged RF = Reflector Floodlights on 3 ft. arms.
poles which allow the top windsock and S302 = Lighting powered by 6.6A series circuit.***
lighting assembly to be lowered for servicing. Includes lamps and connector kit. (Not for -RF version.)
Order 300W isolation transformer separately.
• ETL Certified W = Winch for lowering hinged pole (L-807 only).

Wind Cone Selection Chart

Basic Rigid Frangible Windsock
Catalog FAA FAA Obstruction Floodlights
Number* Approval Size** Hinged Pole Breakable Pole Light (4) Length (ft.) Diameter (in.)
48310 L-807 2 X X X 12 36
48311 L-807 2 X 12 36
48312 L-807 2 X X 12 36
48313 L-807 2 X X 12 36
44481 L-807 1 X X X 8 18
44482 L-807 1 X 8 18
44483 L-807 1 X X 8 18
44484 L-807 1 X X 8 18
71043 L-806 1 X X X 8 18
71044 L-806 1 X 8 18
* An ‘‘X’’ on the chart denotes a feature of that catalog number wind cone. Order lamps separately.
** Size 1 = 8 ft. (2.4 m.) long windsock (WC-18)      Size 2 = 12 ft. (3.7 m.) long windsock (WC-36)
*** S302 Option Wind Cone is not ETL Certified.

Application Notes a power adapter. The transformer or adapter may be directly

• The voltage may be 120 or 220-240 if the proper voltage buried or installed in an L-867 base with
lamps are used. All lamps have medium screw (E27) bases. coverplate.
Order lamps separately. • Anchor bolts should extend 4 inches above grade.
• For connection to a series circuit, order option S302 and an • The Size 1 and Size 2 wind cone hinged poles are
isolation transformer or order the standard wind cone and identical except for the tenon diameter.

www.chalp.com
3 . 32
 Installation Drawings

Rigid Installation Frangible Installation

Size 1 (WC-18) & Size 2 (WC-36) Size 1 (WC-18)
EOL-40940
Obstruction Light EOL-40940
10” Obstruction Light
10”

Floodlight (4)
Floodlight (4)

Pipe Support/Bearing
Support/Bearing Assembly
11’-5” (WC-36) Assembly
6’-6” (WC-18) 9’-6”
Windsock
Windsock
18”

Top of Pole 6’ 1” Pipe

(Included)
ML4913
Breakable Coupling
(Included)

Suggested Installations:
Hinge
Centerline
1. Baseplate 1832*
Base 2124*
2. Rigid Steel Conduit Elbow
Hinged Pole (not shown)
(Prime Painted)
16’ * Order separately.

NOTE: Remove this bolt to release Dimensions: Feet-Inches

pole for lowering to service the
top assembly. Instruction Manuals: 9553 Size 2 Rigid
9554 Size 1 Rigid
Pole Baseplate 8512 Size 1 Frangible
Detail

Handhole 10.5” 4831X 4448X 7104X

12.3” 3” x 5”
7.78” Shipping Weight: 510 lbs. 450 lbs. 250 lbs.
232 kg. 205 kg. 114 kg.
7.78” 10.5”
71023
Anchor Bolt (4)
Shipping Volume: 40 cu.ft. 40 cu.ft. 30 cu.ft.
(Included)  Bolt Circle Diameter = 11” 1.13 cu.m. 1.13 cu.m. 0.85 cu.m.

Renewal Parts

Approach & Navigational Aids

Part Number Description Part Number Description

10047-1577 Lamp 116W, 120V KL8096A Floodlight (4) Assembly (-RF option)
10047-2145 Lamp 116W, 220-240V 0501413-4 Reflector (-RF option)
10047-2882 Lamp 250W, 120V, PAR-38 40940 EOL Obstruction Light
150/CL Lamp 150W, 120V (-RF option) 50026 Red Globe
10047-2167 Lamp 45W, 6.6A, PAR-38 (-S302 option) 71023 Anchor Bolt 0.75” x 28” (5” Threaded)
10047-2942 Lamp 150W, PAR-38, 220/230V HSSLDW Winch

FAA Size 1 (WC-18) Only FAA Size 2 (WC-36) Only

71073-ON Windsock - Orange Nylon 8 ft. 71045-ON Windsock - Orange Nylon 12 ft.
71073-WN Windsock - White Nylon 8 ft. 71045-WN Windsock - White Nylon 12 ft.
71048-18 Hinged Pole (Rigid) 71048-36 Hinged Pole
ML364B Support/Bearing Assembly (Rigid) KL7897 Support/Bearing Assembly
0600696 Pipe Support/Bearing Assembly (Frangible) KL8097A Bearing
0504611-1 Bearing (Rigid) FL623 Slipfitter 3” Diameter
FL579 Slipfitter (Rigid) 44621A Complete 48310 less Hinged Pole
ML4913 Breakable Coupling (Frangible) 71046-BN Bicolor Red & White Wind Sock
44036 Complete 44481 less Hinged Pole (Size 2 only)
44478 Complete 44482 less Hinged Pole
44479 Complete 44483 less Hinged Pole
44480 Complete 44484 less Hinged Pole
10047-2215 Lampholder PAR 38

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 3. 33
 Notes

www.chalp.com
3 . 34
 SECTION 4

Power & Control

Equipment

Power and control are at the heart of the lighting control type regulators in a variety of sizes for all airports. Our regu-
system for any airfield. The Federal Aviation Administration lators and control gear are designed to provide precision
has set forth standards dictating how fixtures and signs may control of airfield circuits and interface with a wide array of
be powered and controlled. Crouse-Hinds Airport Lighting control and monitoring options.

Power & Control Equipment

Products has the constant current Ferro-resonant and series

Application Icons

Power Vault Lighting

Control
 REGF
AIRPORT LIGHTING PRODUCTS

Constant Current Regulators -

Ferroresonant
Compliances: FAA AC 150/5345-10: L-828
ICAO Aerodrome Design Manual, Part 5

REGF
Small/4-10kW Unit Shown with Megatrac™ option

Applications Ordering Information

The REGF Constant Current Regulator is
designed to provide precision control of 8 2 8 6 0 F _ _ _ _
runway lighting circuits. The equipment
can be supplied with a wide range of
control and monitoring options. Fixture
Type:
These regulators are air cooled and 8 = L-828
designed for indoor service.
Frequency:
Features 6 = 60Hz
• ETL Certified
• Air cooled RegulatorType:
• Ferroresonant Design F = Ferroresonant
• Built-in digital ammeter
(0.5% accuracy) Input Voltage:
• Low Total Harmonic Distortion (THD)<10% 208 = 208 V, 60 Hz
• Clean output sinusodial wave form 220 = 220 V, 60 Hz
240 = 240 V, 60 Hz
• Stackable design (3 High Max)
480 = 480 V, 60 Hz
• Regulation ±1% over 0 to 100%
load and +10% to -5% line
voltage with no tap changes Kilowatt Rating:
04 = 4.0 kW
• On-off switching under load
07 = 7.5 kW
• Lightning and transient protection: 10 = 10 kW
input and output lines
• Efficiency – 90% minimum
(High step, fully loaded) Output Brightness Steps:
1 = 1 Step (5.5A)
• High power factor .99
(High step, fully loaded) 3 = 3 Step (4.8, 5.5 & 6.6 A)
5 = 5 Step (2.8, 3.4, 4.1, 5.2 & 6.6 A)
• Remote reset capability
• Output current maintained with Options:
30% open isolation transformer
secondaries B = Integral circuit breaker
• Open circuit protection
C = Computer ready interface*
D = Digitrac™ computerized control and monitoring system (Includes option C)
• Over current protection M2 = Integral Megatrac earth leak detector (includes option S2)
• Soft On/Off S2 = Integral S-1 Cutout Model 2
• 10,000 feet remote control @ 120V V = DC Remote Control
• Temperature – 40°C to +55°C
• Single control board for all sizes * Includes potential and current transformers and relay contacts for indication of loss of
input power and local/remote control.
• Rotary switch for step-control Standard remote control voltages are 24 Vdc, 48 Vdc, 60 Vdc & 120 Vdc, 60 Hz.
• Field selectable brightness steps (1, 3, 5)
• Hinged front door with key lock handle

www.chalp.com
4.2
Outline Drawing

COnsTAnT CuRREnT REguLATOR

singLE PHAsE
PowerTrac

REmOTE
OFF
1

2
LOCAL
COnTROL 3
sWiTCH
4
5
! dAngER
HigH VOLTAgE PREsEnT insidE CABinET
WHEn THE REguLATOR is EnERgiZEd

26.5˝

24.0˝ 25.0˝

Technical Data
Power Factor/Efficiency Data (100% load/10kw)

5 - Brightness Step CCR Dimensions: inches

(mm)
Step (output) Power Factor Efficiency% Instruction Manual: 2501

B5 (6.6A) .99 93% 4Kw 7.5Kw 10Kw

B4 (5.2A) .98 93% Shipping Weight: 490 lbs. 581 lbs. 711 lbs.
222 kg. 264 kg. 323 kg.
B3 (4.1A) .98 91%
B2 (3.4A) .98 89% Shipping Volume: 9.2 cu.ft. 9.2 cu.ft. 9.2 cu.ft.
.26 cu.m. .26 cu.m. .26 cu.m.
B1 (2.8 A) .79 84%

Renewal Parts

Power & Control Equipment

Part Number Description

10041-31 Switch knob

32752 Display printed circuit card
34031-1* Main printed circuit card, 120 VAC internal control voltage
34031-1V* Main printed circuit card, for use with Option V
10047-2789 Solid State Relay
32990 Capacitor, 50uF, 660 VAC
10047-2937 Thermal Pad for Solid State Relay

* Serial Number units prior to 300 consult factory.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 3
 REGF
AIRPORT LIGHTING PRODUCTS

Constant Current Regulators -

Ferroresonant
Compliances: FAA AC 150/5345-10: L-828
ICAO Aerodrome Design Manual, Part 5

REGF1
Medium/15-20kW Unit Shown with Megatrac™ option

Applications Ordering Information

The REGF Constant Current Regulator is
8 2 8 6 0 F 1 _ _ _ _
designed to provide precision control of
runway lighting circuits. The equipment
can be supplied with a wide range of Fixture
Type:
control and monitoring options. 8 = L-828
These regulators are air cooled and Frequency:
designed for indoor service. 6 = 60Hz
Features RegulatorType:
• ETL Certified F = Ferroresonant
• Air cooled
Cabinet Size:
• Ferroresonant Design
1 = Mid-Size
• Built-in digital ammeter
(0.5% accuracy) Input Voltage:
• Low Total Harmonic Distortion (THD)<10% 208 = 208 V, 60 Hz
• Clean output sinusodial wave form 220 = 220 V, 60 Hz
• Stackable design (2 High Max) 240 = 240 V, 60 Hz
480 = 480 V, 60 Hz
• Regulation ±1% over 0 to 100% load
and +10% to -5% line voltage Kilowatt Rating:
with no tap changes
15 = 15 kW, 6.6A
• On-off switching under load 20 = 20 kW, 6.6A
• Lightning and transient protection: 16 = 15 kW, 20A
input and output lines 21 = 20 kW, 20A
• Efficiency – 90% minimum
(High step, fully loaded) Output Brightness Steps:
• High power factor .99 1 = 1 Step (5.5A) - 6.6A units only
(High step, fully loaded) 3 = 3 Step
5 = 5 Step
• Remote reset capability
• Output current maintained with Options:
30% open isolation transformer B = Integral circuit breaker
secondaries
C = Computer ready interface*
• Open circuit protection D = Digitrac™ computerized control and monitoring system (Includes option C)
• Over current protection M2 = Integral Megatrac earth leak detector (includes option S2)
• Soft On/Off S2 = Integral S-1 Cutout Model 2
V = DC Remote Control
• 10,000 feet remote control @ 120V
• Temperature – 40°C to +55°C * Includes potential and current transformers and relay contacts for indication of loss of
• Single control board for all sizes input power and local/remote control.
• Rotary switch for step-control Standard remote control voltages are 24 Vdc, 48 Vdc, 60 Vdc & 120 Vdc, 60 Hz.
• Field selectable brightness steps (1, 3, 5)
• Hinged front door with key lock handle

www.chalp.com
4.4
Outline Drawing

LOCAL
CONTROL
SWITCH
! DANGER

39.75˝

30.0˝ 25.0˝

Technical Data
Power Factor/Efficiency Data (100% load/20kw)

5 - Brightness Step CCR Dimensions: inches

(mm)
Step (output) Power Factor Efficiency% Instruction Manual: 2334

B5 (6.6A) .99 91% 15Kw 20Kw

B4 (5.2A) .98 90% Shipping Weight: 860 lbs. 1070 lbs.
390 kg. 485 kg.
B3 (4.1A) .98 89%
B2 (3.4A) .91 87% Shipping Volume: 13.8 cu.ft. 13.8 cu.ft.
.39 cu.m. .39 cu.m.
B1 (2.8 A) .71 84%

Renewal Parts

Power & Control Equipment

Part Number Description

10041-31 Switch knob

32752 Display printed circuit card
34031-1 Main printed circuit card, 120 VAC internal control voltage
34031-1V Main printed circuit card, for use with Option V
10047-2789 Solid State Relay
32990 Capacitor, 50uF, 660 VAC
10047-2937 Thermal pad for solid state relay

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 5
 REGF
AIRPORT LIGHTING PRODUCTS

Constant Current Regulators -

Ferroresonant
Compliances: FAA AC 150/5345-10: L-828
ICAO Aerodrome Design Manual, Part 5

Large/30kW Unit REGF2

Applications Ordering Information
The REGF Constant Current Regulator is
designed to provide precision control of 8 2 8 6 0 F 2 _ _ _ _
runway lighting circuits. The equipment
can be supplied with a wide range of
Fixture
control and monitoring options. Type:
8 = L-828
These regulators are air cooled and
designed for indoor service. Frequency:
6 = 60Hz
Features
• ETL Certified RegulatorType:
• Air cooled F = Ferroresonant
• Ferroresonant Design
Cabinet Size:
• Built-in digital ammeter 2 = Full-Size
(0.5% accuracy)
• Low Total Harmonic Distortion (THD)<10% Input Voltage:
• Clean output sinusodial wave form 208 = 208 V, 60 Hz
• Stackable design (2 High Max) 220 = 220 V, 60 Hz
240 = 240 V, 60 Hz
• Regulation ±1% over 0 to 100% load 480 = 480 V, 60 Hz
and +10% to -5% line voltage
with no tap changes
Kilowatt Rating:
• On-off switching under load 30 = 30 kW, 6.6A
• Lightning and transient protection: 31 = 30 kW, 20A
input and output lines
• Efficiency – 90% minimum Output Brightness Steps:
(High step, fully loaded) 1 = 1 Step (5.5A)
• High power factor .99 3 = 3 Step (4.8, 5.5 & 6.6 A)
(High step, fully loaded) 5 = 5 Step (2.8, 3.4, 4.1, 5.2 & 6.6 A)
• Remote reset capability
Options:
• Output current maintained with B = Integral circuit breaker
30% open isolation transformer C = Computer ready interface*
secondaries
D = Digitrac™ computerized control and monitoring system (Includes option C)
• Open circuit protection M2 = Integral Megatrac earth leak detector (includes option S2)
• Over current protection S2 = Integral S-1 Cutout Model 2
• Soft On/Off V = DC Remote Control
• 10,000 feet remote control @ 120V * Includes potential and current transformers and relay contacts for indication of loss of
• Temperature – 40°C to +55°C input power and local/remote control.
• Single control board for all sizes Standard remote control voltages are 24 Vdc, 48 Vdc, 60 Vdc & 120 Vdc, 60 Hz.
• Rotary switch for step-control
• Field selectable brightness steps (1, 3, 5)
• Hinged front door with key lock handle

www.chalp.com
4.6
Outline Drawing

LOCAL
COnTROL
sWiTCH
! dAngER

39.75˝

36.0˝ 25.0˝

Technical Data
Power Factor/Efficiency Data (100% load/30kw)

5 - Brightness Step CCR inches

Dimensions: (mm)
Step (output) Power Factor Efficiency%
Instruction Manual: 2349
B5 (6.6A) .99 93%
B4 (5.2A) .98 91% Shipping Weight: 1,635 lbs.
742 kg.
B3 (4.1A) .98 90%
Shipping Volume: 20.7 cu.ft.
B2 (3.4A) .92 88% .58 cu.m.
B1 (2.8 A) .74 85%

Renewal Parts

Power & Control Equipment

Part Number Description

10041-31 Switch knob

32752 Display printed circuit card
34031-1 Main printed circuit card, 120 VAC internal control voltage
34031-1V Main printed circuit card, for use with Option V
10047-2789 Solid State Relay
32990 Capacitor, 50uF, 660 VAC
10047-2937 Thermal pad for solid state relay

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 7
 CCR-SGS
AIRPORT LIGHTING PRODUCTS

Constant Current
Regulator -
Switchgear System
Compliances: FAA AC 150/5345-10: L-828 CCR-SGS
Applications Ordering Information
The Crouse-Hinds Constant Current _ _ _ _
Regulator-Switcgear System (CCR- 8 2 8 S G S
SGS) utilizes Ferroresonant Transformer
technology for the distribution of electrical
power and the precision control of airfield Fixture Type:
lighting circuits. The equipment meets L-828
all applicable FAA standards, integrates
enhanced safety features, provides for cost- Switchgear
effective installation and serviceability, CCR Model:
is air-cooled and designed for indoor
installations. Input Voltage:
480 = 480 V, 60 Hz
Features Kilowatt Rating:
• ETL Certified 04 = 4.0 kW (6.6A Unit Only)
• Superior power factor and efficiency over all 07 = 7.5 kW (6.6A Unit Only)
steps (Refer to Table A, next page) 10 = 10 kW (6.6A Unit Only)
15 = 15 kW, 6.6A
• Superior low-line harmonics and low EMI 16 = 15 kW, 20A
characteristics 20 = 20 kW, 6.6A
• Standardized design for maximum space 21 = 20 kW, 20A
utilization 30 = 30 kW, 6.6A
• Modular construction for interchangeability 31 = 30 kW, 20A
• Integrated Model 2 S-1 Cutout provides added Output Brightness Steps:
safety during servicing 1 = 1 Step (5.5 A, not available with 20 A units)
• Diagnostic LEDs, and digital ammeter for 3 = 3 Step
enhanced troubleshooting capabilities 5 = 5 Step
• Capability for line and load circuit switching
while in operation Options:
C = Computer ready interface*
• Lightning protection for both input and D = Digitrac™ computerized control & monitoring system (includes option C)
output lines M = Megatrac™ Integral earth leakage detector
• Integrated soft start and remote reset V = DC Remote Control
functions
* Potential & current transformer included, Circuit Board with relay contacts for loss of
• Internal 120VAC Control Voltage input power & local/remote control.
• Integral Circuit Breaker Standard remote control Voltages are 24, 48, 60 VDC & 120 VAC, 60 Hz.
• Rotary Switch off/remote & step control
• Air Cooled
• Designed for Indoor Installation

www.chalp.com
4.8
Outline Drawing

!
s-1 CuTOuT

dAngER

RV1 inP K1

dO nOT PuLL On sHEET mETAL

T3 T5

CB1
inT
inPuT E1
gnd

43.8˝
E2
T7

(15-30 kW) K2
T4

T2

38.5˝
(4-10 kW)

CAP1

CAP2
TB3

T8
TB2

T6

PuLL HERE

26.5˝

Technical Data
Table A – Power Factor/Efficiency Data (100% load)

5-Brightness step CCR 3-Brightness step CCR

Power Power
Step (output) Factor Efficiency% Step (output) Factor Efficiency%
B5 (6.6 A or 20 A) .99 94% B100 (6.6 A or 20 A) .99 93%
B4 (5.2 A or 15.8 A) .99 93% B30 (5.5 A or 16.5 A) .98 91%
B3 (4.1 A or 12.4 A) .94 91% B10 (4.8 A or 14.4 A) .79 84%
B2 (3.4 A or 10.3 A) .87 89% — — —
B1 (2.8 A or 8.5 A) .79 81% — — —

Power & Control Equipment

Renewal Parts
Part Number Description

10041-31 Switch Knob Instruction Manual: 2447

32752 Display printed circuit card
34031-1 Main printed circuit card, 120 VAC internal control Shipping Weight: 4 kW–10 kW 15 kW–20 kW 30 kW
voltage
1230 lbs. 1435 lbs. 1650 lbs.
34031-1V Main printed circuit card, for use with Option V
558 kg 651 kg 748 kg
10047-2789 Solid State Relay - 4-30 kW unit
32990 Capacitor, 50uF, 660 VAC Shipping Volume: 36 in. W x 48 in. D x 57 in. H
10047-2937 Thermal pad for solid state relay

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 9
 C-SGS
AIRPORT LIGHTING PRODUCTS

Cabinet - Switchgear

Compliance: UL 891 C-SGS

Applications Ordering Information
The Crouse-Hinds Switchgear System
(SGS) utilizes a UL compliant bus for the 8 2 8 S Y S
distribution of electrical power and the
precision control of airfield lighting circuits.
The equipment meets all applicable UL Combinations
and NEMA standards, integrates enhanced (Specify installation line up left to right):
safety features, provides for cost-effective
installation and serviceability, is air-cooled Airport Code:
and designed for indoor installations.
Project Number:

Features
• Complies with UL891, standard for
dead-front switchboard
Maximum Bus Bar System Capacity:
• NEMA1 cabinet 280 kW (at 480V, Input Voltage)
• Seismic zone 4 rated system
• 65,000 AIC bus bracing Power Requirements Data
• 800 Amp copper main horizontal bus
480 V, Input
with deadfront CCR-SGS
• 300 Amp copper ground bus CCR
• Field changeable (CCR-SGS) load balancing (Rated Current)
• Modular design for easy add-on 04 kw 9A
field installations
7.5 kW 17 A
• Rated for 480 VAC
10 kW 23 A
• Two regulators (CCR-SGS) per cabinet
15 kW 34 A
20 kW 46 A
30 kW 69A

www.chalp.com
4 . 10
Outline Drawing
128.0˝ (325)

mAin COnsTAnT CuRREnT AuXiLARy CABinET s-1 CABinET

inPuT REguLATOR CABinET FOR CCs

98.0˝
(249)

Powertrac

P/n 34122 P/n 34123 P/n 34125 P/n 34124

ViEW sHOWn
WiTHOuT dOOR
FRONT VIEW

10.0˝ 10.0˝ 16.0˝ PER sECTiOn

(25.4) (25.4) (41) ø.625˝ (16 mm)
5.0˝ (12.7) TyP. TyP. TyP. (4)

42.0˝
38.0˝
(107)
30.0˝ (97)
CuTOuT

CuTOuT

CuTOuT

CuTOuT

TyP.
(76) TyP.
TyP.

15.0˝
2.5˝ (6.4) 31.0˝ (79) 1.9˝ (4.8)
(38)
TyP. TyP. TyP.
20.0˝ 36.0˝ (91) 6.0˝ (15)
(51) TyP. TyP.

BOTTOM VIEW

Dimensions: inches
(mm)
inches
(cm) Instruction Manual: 2516

Shipping Weight: Main Input Cabinet - 700 lbs

Auxiliary Cabinet - 700 lbs

Power & Control Equipment

Constant Current Regulator Cabinet - 1200 lbs

Renewal Parts
Part Number Item Description

34122 Main input cabinet & circuit breaker

34192 Constant Current Regulator Cabinet (2 power modules)
34124 S1 Cabinet
34125 Auxiliary Cabinet
34126 Upper Track Extension
34127 Lower Track Extension

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 11
 REGW
AIRPORT LIGHTING PRODUCTS

Constant Current
Regulators-Wet
Compliances: FAA AC 150/5345-10: L-828 and L-829
ICAO Aerodrome Design Manual, Part 5
UFC 3-535-01
USN NAVAIR 51-50AAA-2 REGW
Applications Ordering Information
The REGW Constant Current _ _ _ _ _ _
Regulator is designed to provide W
precision control of runway lighting
circuits. The equipment can be Fixture
supplied with a wide range of control Type:
and monitoring options. 828 = L-828
These regulators are oil cooled and 829 = L-829
designed for indoor service.
Frequency:
Features 50 = 50 Hz
60 = 60 Hz
• ETL Certified
• Oil cooled W = Wet Type: Oil Cooled
• Advanced CH-III control system
Kilowatt Rating:
• Shunt type ferro-resonant regulator 11 = 10 kW
• Elapsed Time Indicator: 15 = 15 kW
each step and total 20 = 20 kW
30 = 30 kW
• Built-in digital ammeter
37 = 37.5 kW (60 Hz Only)
(0.5% accuracy)
50 = 50 kW
• Regulation ±1% over 0 to 100% load 70 = 70 kW (60Hz Only) (Not FAA Approved)
and +10% to -5% line voltage
with no tap changes Input Voltage:*
• On-off switching under load 1 = 208 (Not Available above 30 kw)
2 = 220 (Not Available above 30 kw)
• Superior Lightning and transient 3 = 230 (Not Available above 30 kw)
protection: input and output lines 4 = 240 (Not Available above 30 kw, 50 Hz & 37.5 kw, 60 Hz)
• Efficiency — 90% minimum 5 = 380
• High power factor 6 = 400
7 = 415
• Remote reset capability 8 = 480
• Output current maintained with 9 = 2400**
30% open isolation transformer
secondaries Output Current:
• Open circuit protection 66 = 6.6A (Not Available above 30 kw)
20 = 20A (Not Available under 20 kw)
• Over current protection
• Compatibility of Multiple Options Output Brightness Steps:
01 = Fixed (Highest Step)
• Soft On/Off
03 = 3 Steps
• Integral L-829 Monitoring 05 = 5 Steps
• 10,000 feet remote control @ 120V
Options: See catalog page 4.18 for a complete list of options.
• Temperature –40°C to +55°C
• Plug-in printed circuit boards * Voltage Availability
50 Hz only: 230, 380, 400, 415    60 Hz only: 480, 2400     50 or 60 Hz: 208, 220, 240
• Separate High Voltage compartment ** Wye system is standard with one-pole breaker. For Delta system see Option 94 (See page 4.19).

www.chalp.com
4 . 12
Outline Drawing FRONT VIEW
30kw, 60Hz Unit Shown Digital Display
TOP VIEW OUTLINE

Control Assembly Keypad

B
Lifting Eye
27.75
(705)

Cooling Radiator

55.13
(1400)

Ground Lug A

Oil Drain Valve

Dimensions: inches
(mm)
Instruction Manual: 9525 3.00 (76)

Technical Data Dimensions—Inches(Millimeters)

Percentage Radiators
Brightness Current Output (%)
KW A B R1 R2 R3
6.6A Light
Step System 20A System Output 38.36 27.75
10 — — —
(974) (705)
5 6.6 20.0 100.0
43.19 27.75
15 Yes — —
4 5.2 15.8 20.0 (1097) (705)
3 4.1 12.4 4.0 43.19 27.75
20 Yes — —
(1097) (705)
2 3.4 10.3 0.8
30 43.19 31.63
1 2.8 8.5 0.2 Yes Yes —
60Hz only (1097) (803)
43.19 38.25
Shipping Weight Shipping Volume 50 Yes Yes Yes
(1097) (972)
KW Lb. Kg. Cu.Ft. Cu.M. 49.19 38.25
70 Yes Yes Yes
(1249) (972)
10 1575 715 103 2.92
15 1700 770 103 2.92 Note: 30kw, 50Hz and 37.5kw, use data as shown for 50kw.

Power & Control Equipment

20 1825 830 103 2.92
30 2000 910 103 2.92
50 2600 1180 103 2.92
70 3000 1360 103 2.92

Renewal Parts
Part Number Description

32323-“X”-“Y” L-828 Control Assembly

32323-“X”-“Y”-61 L829 Control Assembly

Insert 1, 3, or 5 in place of “X” for the number of brightness steps required.

Insert 1 for 6, 6A or 2 for 20A in place of “Y” for the output current required.

10047-1005 Fuse, 1/8 Amp, Slo-Blo

10047-1205 Fuse, 1 Amp, Slo-Blo
31505-1 SCR/Heatsink Assembly, 10-20KW
31505-2 SCR/Heatsink Assembly, 30-70KW

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 13
 REGD
AIRPORT LIGHTING PRODUCTS

Constant Current
Regulators-Dry
Compliances: FAA AC 150/5345-10: L-828 and L-829
ICAO Aerodrome Design Manual, Part 5
USN NAVAIR 51-50AAA-2
Small/4-10kW Unit REGD
Applications Ordering Information
The REGD Constant Current _ D _ _ _ 6 6 _ _
Regulator is designed to provide
precision control of runway lighting
circuits. The equipment can be
supplied with a wide range of control Fixture
and monitoring options. Type:
These regulators are air cooled and 828 = L-828
designed for indoor service. 829 = L-829
Features Frequency:
• ETL Certified 50 = 50Hz
• Air cooled 60 = 60Hz
• Advanced Diagnostic Aids
D = Dry Type: Air Cooled
• Series transformer type regulator
• Elapsed Time Indicator: Kilowatt Rating:
each step and total
04 = 4.0kW
• Built-in digital ammeter 07 = 7.5kW
(0.5% accuracy) 10 = 10kW
• Regulation ±1% over 0 to 100% load
and +10% to -5% line voltage Input Voltage:*
with no tap changes
1 = 208 5 = 380
• On-off switching under load 2 = 220 7 = 415
• Lightning and transient protection: 3 = 230 8 = 480
input and output lines 4 = 240
• Efficiency – 90% minimum
• High power factor** Output Current:
• Remote reset capability 66 = 6.6 Amps
• Output current maintained with
30% open isolation transformer Output Brightness Steps:
secondaries 01 = Fixed: Full Brightness at 6.6A
• Open circuit protection
03 = 3 Steps
05 = 5 Steps
• Over current protection
• Compatibility of Multiple Options Options: See catalog page 4.18 for a complete list of options.
• Soft On/Off
* Voltage Availability
• Integral L-829 Monitoring
    50Hz only: 230, 380      60Hz only: 208, 480    50 or 60Hz: 220, 240
• 10,000 feet remote control @ 120V ** When Fully Loaded
• Temperature – 40°C to +55°C *** Field adjustments may be required.

• Plug-in printed circuit boards

• Circuit board compatibility
with large dry CCR***

www.chalp.com
4 . 14
Outline Drawing
2.0 (51)

FRONT VIEW SIDE VIEW

Removable
Lifting Eye

Digital
Display
Control
Assembly Keypad

36.0*
(914)
Front
of Unit 3.5
(89)
Conduit Knock-Out Area
Right and Left Sides

6.0 (152)
2.0
(51)

Grounding
Stud

21.3 23.0
(541) (584)

* Theunitwith options 41, 42, 43, or 44 is 12” higher.

Technical Data Renewal Parts - 82X50-D/82X60-D Small

Dry Regulators
REGD Output Percentage (%)
Part Number Description
Current (Amps) Light Output 32322 - “X” L-828 Control Assembly
Brightness 32322 - “X” -61 L-829 Control Assembly
Step 3-Step 5-Step 3-Step 5-Step
Insert 1, 3, or 5 in place of “X” for the number of brightness
5 — 6.6 — 100 steps required.

Power & Control Equipment

4 — 5.2 — 20
10047-1005 Fuse, 1/8 Amp, Slo-Blo
3 6.6 4.1 100 4.0 10047-1205 Fuse, 1 Amp, Slo-Blo
31814 SCR/Heatsink Assembly,
2 5.5 3.4 30 0.8 All units except noted
1 4.8 2.8 10 0.2 by P/N 31817
31817 SCR/Heatsink Assembly,
Note: For 10, 15, 20, and 30Kw shunt type REGD regulators, 208-240VAC, 10Kw units
refer to catalog page 4.2.

 
Dimensions: inches
(mm)
Instruction Manual: 9517

4Kw 7.5Kw 10Kw

Shipping Weight: 250 lbs. 325 lbs. 370 lbs.

114 kg. 145 kg. 168 kg.

Shipping Volume: 17.6 cu.ft. 17.6 cu.ft. 17.6 cu.ft.

0.50 cu.m. 0.50 cu.m. 0.50 cu.m.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 15
 REGD
AIRPORT LIGHTING PRODUCTS

Constant Current
Regulators-Dry
Compliances: FAA AC 150/5345-10: L-828 and L-829
ICAO Aerodrome Design Manual, Part 5
USN NAVAIR 51-50AAA-2
Large/11-30kW Unit REGD
Applications Ordering Information
The REGD Constant Current
Regulator is designed to provide _ _ _ _ _ _
precision control of runway lighting
D
circuits. The equipment can be
supplied with a wide range of control Fixture
and monitoring options. Type:
These regulators are air cooled and 828 = L-828
designed for indoor service. 829 = L-829
Features Frequency:
• ETL Certified 50 = 50 Hz
• Air cooled 60 = 60 Hz
• Advanced Diagnostic Aids
D = Dry Type: Air Cooled
• Shunt type ferro-resonant regulator
• Elapsed Time Indicator: Kilowatt Rating:
each step and total
11 = 10 kW 20 = 20 kW
• Built-in digital ammeter 15 = 15 kW 30 = 30 kW
(0.5% accuracy)
• Regulation ±1% over 0 to 100% load Input Voltage:*
and +10% to -5% line voltage 1 = 208 5 = 380 8 = 480
with no tap changes
2 = 220 6 = 400 9 = 2400**
• On-off switching under load 3 = 230 7 = 415
• Lightning and transient protection: 4 = 240
input and output lines
• Efficiency — 90% minimum Output Current:
• High power factor 66 = 6.6A
• Remote reset capability 20 = 20A (10 kw available in 6.6 Amps only)
• Output current maintained with
30% open isolation transformer Output Brightness Steps:
secondaries 01 = Fixed: Full Brightness at 6.6A
• Open circuit protection
03 = 3 Steps
05 = 5 Steps
• Over current protection
• Compatibility of Multiple Options Options: See catalog page 4.18 for a complete list of options.
• Soft On/Off
* Voltage Availability   
• Integral L-829 Monitoring
50 Hz only: 230, 380, 400, 415    60 Hz only: 480, 2400    50 or 60 Hz: 208, 220, 240
• 10,000 feet remote control @ 120V ** Wye system is standard with one-pole breaker. For Delta System see Option 94.
• Temperature –40°C to +55°C *** Field adjustments may be required.

• Plug-in printed circuit boards

• Circuit board compatibility
with small dry CCR***

www.chalp.com
4 . 16
 Outline Drawing TOP VIEW FRONT VIEW
Removable
Lifting Eyes 2.3
(59)
32.2
(818)

Digital
Display

Lifting
Eyes Control
Assembly

40.4
Keypad
(1027)
36.0
(914)

Input
Wiring Output and
Port Control Wiring
Ports

Front of 1.3
Unit (33)
3.0
(76)

Technical Data
 
REGD Output Percentage (%) Dimensions: inches
(mm)
Current (Amps) Light Output Instruction Manual: 9540
Brightness
Step 3-Step 5-Step 3-Step 5-Step 10 KW 15 KW 20 KW 30 KW

5 — 6.6 20.0 — 100 Shipping 800 lbs. 880 lbs. 1015 lbs. 1170 lbs.
Weight: 363 kg. 399 kg. 460 kg. 531 kg.
4 — 5.2 15.8 — 20
Shipping 84 cu.ft.
3 6.6 4.1 12.4 100 4.0 Volume: 2.37 cu.m.
2 5.5 3.4 10.3 30 0.8
1 4.8 2.8 8.5 10 0.2
Note: For 4, 7.5 and 10 kw series type REGD regulators,
refer to catalog page 4-03.

Power & Control Equipment

Renewal Parts
Part Number Description

32323-”X”-”Y” L-828 Control Assembly

32323-”X”-”Y”-61 L-829 Control Assembly

Insert 1, 3, or 5 in place of “X” for the number of brightness steps required.

Insert 1 for 6, 6A or 2 for 20A in place of “Y” for the output current required.

10047-1005 Fuse, 1/8 Amp, Slo-Blo

10047-1205 Fuse, 1 Amp, Slo-Blo
31505-1 SCR/Heatsink Assembly, 10-20KW
31505-2 SCR/Heatsink Assembly, 30KW
10047-1141 Fuse, 2 Amp, Slo-Blo

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 17
 CCRO
AIRPORT LIGHTING PRODUCTS

Constant Current
Regulator Options-
For REGD & REGW Units
CCRO
Applications
The options described below apply to the Crouse-Hinds REGD and REGW constant current regulators (CCR’s) listed in the
catalog. Many options may be combined in one CCR. However, contact Crouse-Hinds when specifying multiple options to
insure compatibility.

Option Number Description

11 48 VDC Control Voltage (Remote Source)­

The regulator control voltage is 48 VDC supplied by the user from a remote source. The source is typically a DC
power supply but it may also be batteries. This option replaces the standard internal 120 VAC supply.

16 48 VDC Control Voltage (Internal­  Source)­

The regulator control voltage is 48 VDC supplied by a built-in power supply. No separate power supply in the tower
is required. Using individual power supplies for each regulator lessens the possibility of control system failure than
when using a single central source. This option replaces the standard internal 120 VAC supply.

21 On/Off Output Current Monitor­ ­

Also called simple remote back indication, this option supplies a set of dry contacts for remote monitoring of the
output current. It provides a positive signal to the tower that the constant current regulator is really “on”, that is,
there is current output to the circuit.

22 Individual Step Output Current Monitor­

This option is remote back indication for the individual brightness steps of the constant current regulator. It
provides a positive signal to the tower that the constant current regulator is really “on” at the commanded step, that
is, there is current output to the circuit. There are five (5) normally open contacts for brightness step indication and
one (1) normally open contact that monitors two fault conditions: overcurrent and open circuit.

23T Computer Interface

This option is used only for FAA L-828 regulators and provides sets of dry contacts for remote status monitoring.
There are two (2) normally open / normally closed Form C contacts to monitor: local or remote status; and regulator
input power indication. (This option provides potential and current transformers and related items for a CROUSE-
HINDS computerized control system).

31 Lamp Failure Detector (829X0 only)

This option is used only for FAA L-829 regulators and provides additional eight (8) dry contacts for remote indication
from zero to eight (8) individual failed airfield lighting lamps.

33 Earth Leakage / Ground Fault Detector­

Cable insulation resistance is based on soil conditions, cable length and age, and other variables. This option will
display a relative p
­ ercentage leakage value. This option may also substitute for periodic circuit megger readings
and provides programmable ground fault detection with two (2) levels of remote alarm via dry contacts. Readings
are requested using the keypad and appear on the CCR digital display. The installer calibrates the CCR to the 100%
value (zero ohms) by shorting one output terminal to ground. When first connected to the circuit, the initial reading
represents the existing leakage (typically less than 20%). Record that initial percentage value P1­ as the baseline and

www.chalp.com
4 . 18
 measure future percentage P2­ readings relative to it. Megger the circuit the first time and record that value as M1­.
Future megger readings M2­ are performed by reading P2­ and using the following formula:
                        M2­ = M1­ ( P1­ 3 P2­ ) 100% = 0 ohms ­
P1­ = Initial % reading M1­ = Initial megger P2­ = Today’s % reading M2­  = Today’s megger
The user determines and sets the two (2) percentage alarm levels.

41 Digital Display of Line Voltage & Current­

Displays on one (1) meter the regulator’s input line volts and amps.

42 Digital Display of Line Voltage, Line Current & Load Voltage­

Combines the functions of options 41 and 44 using two (2) meters.

43 Digital Display of Line Voltage­

Displays on one (1) meter the regulator’s input line volts.

44 Digital Display of Load­Voltage­

Displays on one (1) meter the regulator’s output series circuit volts.

62 Discrete Status Indication (829­X0 only)­

This option is used only for FAA L-829 regulators and provides seven (7) dry contacts for remote status monitoring of
the L-829 functions. Without this option, the L-829 alarms are indicated only by a single global alarm signal locally
at the regulator.

63T Digitrac Computer Interface

Integrated Digitrac Unit that provides full CCR control and L-827/L-829 monitoring, as described below, to a Crouse-
Hinds Airfield Lighting Control System.
1) Loss of input power to the CCR.
2) CCR shutdown by open-circuit/over-current protective devices.
3) Drop of more than 10% in the CCR VA load.
4) Failure of the CCR to deliver the selected output current.
5) The number of burnt-out lamps in each series circuit.
6) CCR status (local or remote control).
7) The actual CCR output current.
8) The actual CCR output voltage.
9) The actual CCR output load (wattage).
10) The status of the computer-controlled interposing relays that activate the CCR (commanded brightness
acknowledge).

94 Primary Switch. 2 Poles

The standard primary switch for 2400V input power is made for a Wye configuration, which consists of (1) 2400V line
and (1) neutral. This Option provides a primary switch for a Delta configuration, which consists of (2) 1200V lines.

S-486 Integrated Megatrac – REGD Large Dry (pages 4.16 & 4.17)

Power & Control Equipment

Integrated Megatrac Unit that monitors and displays the insulation resistance to ground of the airfield lighting
series circuit. The Megatrac Unit also provides a warning and/or alarm when the cable’s insulation resistance
measurement falls below customer selectable thresholds

S-548 Integrated Megatrac – REGD Small Dry (pages 4.14 & 4.15)
Integrated Megatrac Unit that monitors and displays the insulation resistance to ground of the airfield lighting
series circuit. The Megatrac Unit also provides a warning and/or alarm when the cable’s insulation resistance
measurement falls below customer selectable thresholds

Important Note: W
 here applicable, the contacts provided for external remote indication are limited to two (2) amps
resistive load. The external wiring and indicators are not supplied by Crouse-Hinds. Improper external
wiring voids the regulator warranty.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 19
 LAHSO
AIRPORT LIGHTING PRODUCTS

Land and Hold Short

Lighting System Power
and Control Unit (PCU)
LAHSO
Compliances: FAA, AC 150/5345-54: L-884 PCU with open door shown

Applications Ordering Information

The L-884 power and control unit The Power and Control Unit (PCU) is How to Order PCU: To the basic
(PCU) is a power supply designed sold as a separate piece of equipment catalog number, add the symbols for
to power and simultaneously pulse and all other LAHSO system Input Power, and Options (if required).
all lights in a land and hold short components are sold separately.
operations (LAHSO) light bar.

Features
• ETL Certified
8 8 4 A
• Style I: For indoor use
(all units include photo cell)
• Unit can be field configured for MIRL Fixture Type:
or HIRL (HIRL, configured from factory)
operation Model Number:
• Alarm relays provided for discrete alarm
indication for each monitored parameter Input Power:
• Plug-in printed circuit cards with LED 120 = 120V, 60Hz
diagnostic indicators 208 = 208V, 60Hz
240 = 240V, 60Hz
• Unit can operate 6 or 7 light LAHSO light
bar
Options:
• -55°C to +70°C temperature operation 24 = 24VDC External Control Voltage
range 48 = 48VDC External Control Voltage
• Optional 24VDC or 48VDC circuit boards
for user supplied external control voltage.
120VAC internal/external control voltage
circuit board is factory supplied.
• Tower control panel available as an
accessory for installation in ATC tower

www.chalp.com
4 . 20
LAHSO System Description
At night, the intensity is varied and depends on the
The lighting system consists of six (6 or 7) unidirectional brightness level of the runway edge lights. See Table 1 for
inpavement light fixtures conforming to FAA L850F, a the various brightness levels utilized. Monitoring of the
Power and Control Unit and a tower control panel. The six runway edge lights
or seven lights are flashed synchronously when activated is accomplished by inserting a 45 watt 6.6/6.6 amp or
by Air Traffic Control. Each Power and Control Unit supplies 20/6.6 amp isolating transformer in the runway circuit
power to the six or seven lights, adjusts the brightness and feeding the secondary current back to the Power and
level and detects the failure of a lamp or the failure of the Control Unit. Figure 1 below is a system diagram depicting
lamps to flash. a functioning ­system. The input circuit breaker for each
PCU should be sized approx. 25% above the actual peak
The brightness level of the six or seven flashing input current
inpavement lights is determined by the Power and Control (7 Amps) for any specified voltage (120VAC, 208VAC or
Unit after receiving inputs from a photoelectric control and 240VAC).
detecting the existing brightness level of the runway edge
lights. During daytime, the lights are always operating at
maximum brightness level.

Figure 1

Table 1

Power & Control Equipment

Remote Control Performance
Runway Edge Lighting PCU Intensity Step PCU Intensity Step
Intensity Step (Day) (Night)
B1 5 3
B2 5 3
B3 5 4
HIRL
B4 5 5
B5 5 5
OFF 5 3
B10 5 3
B30 5 3 MIRL

B100 5 4
* Refer to pg. 4.32 for L-823 Connector Kits selection.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 21
 AIRPORT LIGHTING PRODUCTS
Instruction Manual: 2217

Dimensions: inches
(mm)

14" .19 diA

(356) 13 3/4" (5) 4"
(349) 4 Holes (102)
3/4"
(19)

14"
(356) 13 3/4"
(349)

26941-1 Control Panel 26942-2 Control Panel

With one set of lights per runway With multiple lights on the same runway

Accessories
Suggested Quantity Shipping Weight Shipping Volume
Part Number (per system) Description Lbs. Kg. Cu.Ft. Cu.M.

850F3 6 or 7 Runway Centerline Light, L-850F, 48 Watts

20453-1 6 or 7 Shallow Inset Light Base (For L-850F Fixture) - - - -
AC63242H200301 1 L-867, Size D Base (Isolation transformers housing) 67.0 30.3 4.30 0.006
AK200006 1 Coverplate for L-867, Size D Base - - 0.20 0.006
10530281 1 Gasket, 16” (406mm) 0.5 0.2 - -
21116 6 or 7 48W, 6.6A Lamp for 850F3
10047-409 6 or 7 Film Disc Cutout for 850F3
33001 7 or 8 Isolation Transformer, L-830-1, 45 Watts, 6.6/6.6A 5.2 2.36 0.03 0.009
33002 7 or 8 Isolation Transformer, L-830-2, 45 Watts, 20/6.6A 5.2 2.36 0.03 0.009

Renewal Parts
Part Number Description Part Number Description

10047-1505 Fuse, 0.4 Amp 32277-4 P.C. Board, Mircroprocessor

10047-1686 Fuse, 0.8 Amp 31879-4 P.C. Board, Regulation
10047-1143 Fuse, 0.5 Amp 31971 P.C. Board, Power Supply
10047-2552 Fuse 1.0 Amp 31926-2 P.C. Board, Load Monitor
26984-120 P.C. Board, 120VAC Remote Control (Standard)
26984-48 P.C. Board, 48VDC External Remote Control
26984-24 P.C. Board, 24VDC External Remote Control 26993 P.C. Board, Ferroresonant Control

Shipping Weights and Volumes

Shipping Weight Shipping Volume
Catalog Number Lbs. Kg. Cu.Ft. Cu.M.

884 A 95 46 5.0 0.142

www.chalp.com
4 . 22
Notes

Power & Control Equipment

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 23
 CSC
AIRPORT LIGHTING PRODUCTS

Circuit Selector Switch

Compliances: FAA AC 150/5345-5: L-847
Unified Facilities Criteria UFC 3-535-01 CSC
Applications Ordering Information
The CSC Circuit Selector Switch How to Order: To the basic catalog Example: An 84700-2-3-5 is a two-
is connected to the output of a number, add the number of series circuit selector switch for use with
single constant current regulator circuits to be switched and options 48 VDC remote control. It features a
and switches that output to one from the chart below. relay for on/off remote back indication.
or more airfield lighting series
circuits. Common applications
include circuits for PAPIs, stopbars, 8 4 7 0 0 – –
and taxiway centerlines. The CSC
can also be used as the interface
between a standby backup Basic Number:
regulator and several operating
regulators. Number of
Series Circuits:
Features
• ETL Certified Options:
(6.6 Amp circuits only) Refer to the chart below
• Simultaneous or Exclusive Selection Chart
Switching
Standard Features & Options
• For 6.6 or 20 Amp circuits Select one standard feature or option within each group. If the total number
• Locally and Remotely Controllable of options selected exceeds two (2), consult Cooper Crouse-Hinds for
• Units may be interconnected to serve determination of compatibility.
any number of circuits with GROUP A: INPUT VOLTAGE
a single regulator Standard Feature 120 V, 50/60 Hz
• Clear Dead-Front Cover for Option -2 220-240 V, 50/60 Hz
high-voltage compartment with Option- 15 480 V, 50/60 Hz
interlock switch GROUP B: CONTROL VOLTAGE
• Wall or Conduit Mounting Standard Feature 120 V (Internal Source)
• Deenergized Switching to protect
Option -3 48 VDC (Remote Source)
regulator circuitry
Option -4 120 V (Remote Source)
Option -11 24 VDC (Remote Source)
• Ambient Temperature Range
-40° to +55°C GROUP C: STATUS INDICATION
Standard Feature No Status Indication
Option -5 On/Off 6.6 A Circuit Current Monitor
Option -6 On/Off 20 A Circuit Current Monitor
GROUP D: CIRCUIT SELECTION
Standard Feature Simultaneous: Any combination
Option -8 Exclusive: One circuit at a time
Option -9 Spare Regulator Switching: Prevents
Interconnection of the two CCRs (2-circuit only)
GROUP E: CABINET TYPE
Standard Feature NEMA 1—Indoor (Painted)
Option -10 NEMA 4—Indoor/Outdoor (Painted)
Option -13 NEMA 4X—Indoor/Outdoor (Stainless Steel)
Option -12 Cabinet Door Interlock Switch
Option - 14 Without Cabinet

www.chalp.com
4 . 24
Outline Drawings

Suggested
Conduit Entrances
A = Control Power
B = Regulator
C = Series Circuit

Dimensions: inches
(mm)
Instruction Manual: 9131

-1 -2 -3 -4
Shipping Weight: 70.0 lbs. 95.0 lbs.
31.8 kg. 43.2 kg.

Shipping Volume: 3.4 cu. ft. 5.0 cu. ft.

.096 cu. m. .142 cu. m. Cabinet 24.0H x 20.0W x 8.0D Cabinet 24.0H x 30.0W x 8.0D
Size: (610) (508) (203) Size: (610) (762) (203)
Wiring Diagrams

Power & Control Equipment

Renewal Parts
Part Number Description Part Number Description

34197 Relay K1 SPNC 31955-6 Timing Circuit Board (84700-1 or 2, w/Option 3)

34196* Relay Module K2 DPNO 31955-7 Timing Circuit Board (84700-3 or 4, w/Option 3)
34195* Relay Interface Assembly 31978-1 Current Sensing Circuit Board (84700-1 or 3 w/Option 5)
32849* Relay Interface Harness 31978-2 Current Sensing Circuit Board (84700-2 or 4 w/Option 5)
30848-1 K1 and K2 Relay Module Assembly 10047-1444 Control Transformer 220/120 (84700 w/Option 2)
31955-1 Timing Circuit Board (84700-1 or 2) 10047-1590 Fuse 2.0 Amp (84700-1 or 2)
31955-2 Timing Circuit Board (84700-3 or 4) 10047-1591 Fuse 3.0 Amp (84700-3 or 4)
31955-3 Timing Circuit Board (84700-1 or 2, w/Option 8)
31955-4 Timing Circuit Board (84700-3 or 4, w/Option 8)

* These items must be ordered together

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 25
 RC
AIRPORT LIGHTING PRODUCTS

Radio Controller
Compliances: FAA AC 150/5345-49: L-854
FCC Rules & Regulations: Part 15 RC
NASAO Guidelines RC-1T5A shown

Applications Ordering Information

The Radio Controller permits the remote Crouse-HInds supplies radio controllers by a FAA approved
activation of the airport lighting system by manufacturer such as Control Industries. Each controller includes an
the pilot. This is accomplished by keying the antenna. If desired, specify by description a remote antenna with 50
aircraft’s microphone in a particular sequence feet (15 m) of coaxial cable. Specify the radio frequency.
at a designated frequency. The controller
activates the lighting system upon receiving Catalog Number Description
a series of pulses of radio frequency energy
RC-1T5A Radio Controller
within a five second period. At the third pulse
RIU-1200* Regulator Interface Unit
the first relay closes, at the fifth pulse the
second relay closes, at the seventh pulse the * A regulator interface unit is not required for the operation of any
third relay closes. At any time the pilot has the Crouse-Hinds latest model regulator (with CH-II or III control system).
option of sending three, five, or seven pulses to
command the intensity level to his desires. The Note: For detailed technical data contact Crouse-Hinds.
system will remain at the intensity of the last
command received. The solid state timer will Outline Drawing
continue to operate for 15 minutes after which
it will cause the system to revert to the “off”
condition. The Timer is reset by the receipt of 10.00 (254)
any command at any time, re-initiating the 15 8.00 (203)

minute “run” cycle. 5/16” DIA. MTG. HOLE

4 PLACES
Features
• ETL Certified Antenna

• Frequency: 118 to 136 MHz

Receiver, R3
The UNICOM frequency of 122.8 MHz Decoder,
is commonly selected T
Tuner,
and R2
• Outdoor Enclosure 12.75 Power Supply
(324) LED Indicators
• Whip or Remote Antenna R1
12.00
• Input Voltage: 120V (305)
Cap.
• Solid-State Circuitry Control 1

• Ambient Temperature: ±55°C Power

A
AC Transf.
Neutral

Fuse
Dimensions: inches
(mm) Depth = 5.00
(127)
Shipping Weight: 18.0 lbs.
8.2 kg.

Shipping Volume: 0.62 cu.ft.

0.018 cu.m.

www.chalp.com
4 . 26
SPC
Series Plug Cutout
Type S-1 (MODEL 2)
Compliances: FAA AC 150/5340 SPC2
Applications Ordering Information
The Series Plug Cutout Type S-1 is a device installed
at the constant current regulator (CCR) output 3 0 7 7 5
through which the series circuit passes. With the
handle assembly removed, the SPC isolates the CCR
output from airfield series loop for maintenance Catalog Number:
personnel safety. The SPC also shorts the series
loop and shorts the regulator secondary aiding in
maintenance checks and troubleshooting. Wiring Diagrams
Features
• Provides positive proof that the series circuit cannot be
energized during maintenance
• Shorts the series circuit for maintenance continuity
checks
• Shorts the regulator secondary for maintenance checks
• Body constructed of high strength engineered plastics
• Suitable for 6.6A or 20A circuits
• Protected against arcing

Outline Drawings
Mounting Hole/Slot
0.41 x 0.62
Body (10 x 16)

Power & Control Equipment

Entrance
Handle/Cover Assembly Location for
Series Loop Cables

9.25
(235)
8.25
(210)

Dimensions: inches
(mm)
Instruction Sheet: 9208

Shipping Weight: 4.0 lbs.

4.50
(114) 1.8 kg.
6.38 4.25
Entrance (108)
(162) Location for Shipping Volume: 0.2 cu.ft.
CCR Cables 0.006 cu.m.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 27
 DIGITRAC
AIRPORT LIGHTING PRODUCTS
™

Computer Control System

Compliances: FAA AC 150/5345-56: L-890 ALCMS

ETL Certified
The Crouse-Hinds Digitrac Control System is ETL Certified at all four levels of AC 150/5345-56. This provides our Customers
with options ranging from a basic system with Control Only to a complete SMGCS system for low visibility operation.

Advanced Distributed Computer Technology for

Airfield Lighting Control and Monitoring
The Crouse-Hinds Airport Lighting Products Digitrac™ Control System is a comprehensive and integrated solution to meet
a wide range of airfield lighting control and monitoring requirements. Advanced, distributed architecture ensures reliable
operation and greatly simplifies installation and maintenance.

Fail-safe design
Each controllable element in the lighting system, a constant current regulator, selector switch or generator, has its
own interface with the Digitrac communication network. In the event of component failure, a fail-safe feature assures
continued operation of all elements at preset levels.

Touch-screen control
Choose color CRTs or flat-panel LCDs. Single or multiple touch screens for control and monitoring.

Comprehensive, real-time data

The scope and depth of information provide air traffic control, operations, maintenance and airport management with a
complete picture of the entire airfield lighting system in real time.

TOWER
TOUCHSCREEN

VAULT #1

VAULT
WORKSTAION

VAULT #2
CCR CCR CCR

MAINTENANCE OPERATIONS
FIELD LIGHTING CIRCUITS WORKSTATION WORKSTATION

www.chalp.com
4 . 28
Adaptable and flexible
Innovative design and modular architecture keep pace with airport growth and technological progress. Digitrac can
manage a virtually unlimited number of elements; quick configuration to meet lighting control requirements for airports
of any size.

Networking
Digitrac utilizes a wide area network to link the control tower, operations center, electrical vaults and maintenance
areas. Circle or star configurations are available. Media include: Fiber optic cable, twisted pair or wireless. For increased
reliability and security, we recommend and typically install redundant communication channels.

Within the electrical vaults, Digitrac uses two highly reliable independent communication networks for fast, reliable data
transmission. The network protocol supports communications on a variety of wired and wireless media including twisted
pair, power line, infrared, radio frequency, fiber optic and coaxial cable.

Digitrac interface
Each constant current regulator (CCR) and each controllable element has a Digitrac Interface. The Interface is a
microprocessor-based module that includes all communication, command, monitoring, input/output and fail-safe
functions. This distributed structure simplifies installation and significantly increases reliability and ease of maintenance.
The controllable elements receive the air traffic controller commands via the communications network, execute the
commands and report back the status of each controlled element to all control locations.

Software
The system is based on a network-capable operating system. The application, database and graphic software are off-
the-shelf windowing packages refined to fit the specific needs of airport environments. The system provides security
interlocks between various operator stations and the operational procedures used to define user access and capabilities.
User-friendly definition tools modify the system easily. Simply install a Digitrac interface into new CCRs or control
elements, connect to the local vault network and add its parameters to the system through a simple menu-driven
interface.

Maintenance capabilities
One of the major benefits of Digitrac, beyond meeting requirements for air traffic control, is the availability of real-time
historical information regarding the operation of the airfield lighting system. Digitrac notifies airport maintenance and
operations personnel of malfunctions as they occur, reporting the time, type and nature of the problem as well as the
area of system in which the malfunction occurred. Digitrac stores all malfunction reports and the associated information;
hard copy reports are available through a printer connected to the maintenance computer.

Other capabilities
The Digitrac system is the solution for advanced requirements. This includes the control and monitoring of stop bars and
guard lights as part of a Surface Movement Guidance and Control System plan, failed lamp locator and automatic series
circuit insulation resistance monitoring.

Power & Control Equipment

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 29
 TRANS
AIRPORT LIGHTING PRODUCTS

Series Isolation
Transformers
Compliances: FAA AC 150/5345-47: L-830 & L-831
ICAO Design Manual, Part 5
UFC 3-535-01
NAVAIR 51-50AAA-2 TRANS
Applications Ordering Information
Isolation transformers are used in Catalog Nominal Primary Secondary
series airfield and highway lighting Number Wattage Rating Rating Specification
circuits to electrically isolate the FAA Isolation Transformers
lighting fixture from the medium
voltage usually present. Specialty 33001 30/45 6.6A 6.6A FAA
transformers are also available for 33002 30/45 20A 6.6A FAA
non-standard applications. The 33003 65 6.6A 6.6A FAA
transformers are totally encapsulated 33004 100 6.6A 6.6A FAA
in Santoprene® and, when applied 33005 100 20A 6.6A FAA
with proper connections, are suitable 33006 200 6.6A 6.6A FAA
33007 200 20A 6.6A FAA
for direct burial in the soil.
33008 300 6.6A 20A FAA
33009 300 20A 20A FAA
Features 33010 300 6.6A 6.6A FAA
33011 300 20A 6.6A FAA
• ETL Certified
• Military Transformers comply with MIL- Military** and Specialty Transformers
T-27535
33001-2 30/45 6.6A 6.6A MS 27289-1
• Totally Encapsulated 33101 100 5.5A 6.2A
• Primary Leads (2) with plug and 33102 200 5.5A 6.2A
33103 300 5.5A 6.2A
receptacle
33125 65 120V 9V *
• Secondary Lead (1) with two wire 33150 150 6.6A 6.6A
receptacle 33151 150 240V 22.7V
33200 200 240V 33.3V FAA MALS
• Suitable for 50 to 60 cycle applications
33215 115 240V 17.4V *
except as noted 33226 200 20A 6.6A MS 27286-1
• For a grounded core and secondary, 33266 200 6.6A 6.6A MS 27288-1
add (-GRS) to the catalog number. 33322-3 300 20A 20A MS 27305-1
(Contact Crouse-Hinds for suitability 33366-1 300 6.6A 6.6A MS 27134-1
and availability of this option.) 33522 500 20A 20A MS 27302-1
33154 400 6.6A 6.6A
33001CGRS 30/45 6.6A 6.6A Canada
33004CGRS 100 6.6A 6.6A Canada
33006CGRS 200 6.6A 6.6A Canada

* 60 cycle applications only.

** FAA transformers are acceptable for military applications
unless specified to the contrary in a contract’s specifications.

® Santoprene is a registered trademark of Advanced Elastomer Systems.

www.chalp.com
4 . 30
Technical Data

Typical Transformer Performance Data

Isolation transformers are designed to operate within

the specification for loads ±25% of the
Percentage of Rated Output Current

nominal rating. Consult Crouse-Hinds for

applications outside that range.

Percentage of Rated Load

Dimensions: inches
(mm)

Rated Dimensions Shipping Weight Shipping Volume

Wattage d h lbs. kg. cu. ft. cu. m.

30/45 4.2(107) 3.8(97) 5.2 2.36 0.3 0.009

Power & Control Equipment

65 4.2(107) 3.8(97) 5.3 2.40 0.3 0.009
100 5.3(135) 3.8(97) 8.6 3.90 0.3 0.009
200 5.3(135) 3.8(97) 8.9 4.04 0.3 0.009
300 (6.6A) 6.3(160) 3.8(97) 15.0 6.80 0.7 0.019
300 (20A) 7.1(180) 3.8(97) 17.2 7.80 0.7 0.019
500 7.1(180) 3.8(97) 17.3 7.85 0.7 0.019

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 31
 CKP
AIRPORT LIGHTING PRODUCTS

Primary Connector Kits

Compliances: FAA AC 150/5345-26: L-823
ICAO Annex 14 CKP
Applications Ordering Information
The connection of series isolation transformers to
the power cables requires primary connector kits 8 2 3 K P – –
that can be applied to cable ends in a few minutes
W X Y Z
by the electrical installer following simple illustrated
instructions.
Metal plug and receptacle fittings are crimped onto
the conductors and then inserted into the molded Fixture Type:
rubber housings. L-823
Primary kits provide both a plug and a receptacle. One
kit is required for each transformer location for the Kit, Primary Type:
ends of the series cable.
The circuits may be readily disconnected for Receptacle Cable:
testing or for replacing faulty equipment and then W = Cable Size*
quickly rejoined for continued use. Typically, L-823 X = Conductor Size **
connections are taped and/or sealed using heat shrink
kits (HSK). Plug Cable:
Y = Cable Size*
Note: Connector Kits designed for metal shielded cable are Z = Conductor Size**
available. Contact Crouse-Hinds for information.

Refer to page 6.4 for Crimping Tools.

*Cable Size Table To specify the proper kit for an installation, select from the
tables below the symbols which meet the requirements
Cable Outside Diameter and substitute for (W, X) and (Y, Z) respectively.
Minimum Maximum
Symbol Example:
mm inches mm inches W and Y A 823KP-D4-D4 is a connector kit for #8 stranded
conductor and a cable diameter of .390 inch.
5.0 .195 6.6 .260 B
6.4 .250 8.4 .330 C **Conductor Size Table
8.1 .320 10.9 .430 D Conductor Size
10.7 .420 14.9 .585 E
Concentric Stranded Solid
14.6 .575 19.9 .785 F Symbol
mm 2
AWG mm 2
AWG X and Z
19.7 .775 25.0 .985 G
4 10-12 6 8-10 6
Molded rubber adapters are a part of kits B & C for small
6 8 10 6 4
diameter cables.
10 6 16 4 3
Diameters vary along cable lengths. Take several
16 4 – – 2
measurements. Select a tight fit rather than a loose one.

www.chalp.com
4 . 32
CKS
Secondary Connector Kits
Compliances: FAA AC 150/5345-26: L-823
ICAO Annex 14 CKS
Applications Ordering Information
Secondary Plug Kit Type 823KS-0P
Designed to meet FAA Specifications L-823, Figure 4, style 8 2 3 K S –
4, each kit forms a plug for two single conductor cables for
connection to a secondary receptacle kit or to an isolation Fixture Type:
transformer. L-823
Both cables must be the same size. Kit, Secondary Type:

Cable Type:
0 = Two 1-Conductor
1 = One 2-Conductor

Secondary Receptacle Kit Type 823KS-0R Kit Type:

Designed to meet FAA Specifications L-823, Figure 4, style P = Plug
11, each kit forms a receptacle for two single conductor R = Receptacle
cables for connection to a secondary receptacle plug kit.
Cable Size*:
Both cables must be the same size.
Conductor Size**:

*Cable Size Table

Secondary Plug Kit Type 823KS-1P Cable Outside Diameter

Designed to meet FAA Specifications L-823, Figure 4, style Minimum Maximum
5, each kit forms a plug for a two conductor cable for Size Cable
connection to a secondary receptacle kit or to an isolation mm inches mm inches Symbol Type
transformer.
3 .120 4 .160 S 0

Power & Control Equipment

3.9 .155 5.2 .205 A 0
5.0 .195 6.6 .260 B 0
6.4 .250 8.4 .330 C 0
Secondary Receptacle Kit Type 823KS-1R
Designed to meet FAA Specifications L-823, Figure 4, style 8.1 .320 10.9 .430 D 1
12, each kit forms a receptacle for a two single conductor 10.7 .420 14.9 .585 E 1
cable for connection to a secondary plug kit.
14.6 .575 19.9 .785 F 1

**Conductor Size Table

Conductor Size AWG
Note: To order Style 6 Plug & Style 8 Connector, consult factory. Size
Concentric Stranded Solid Symbol
Refer to page 6.4 for Crimping Tools.
2mm2 14-16 3mm2 12-14 8
4mm2 10-12 6mm2 8-10 6
6mm2 8 10mm2 6 4

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 33
 HSK
AIRPORT LIGHTING PRODUCTS

Heat Shrink Kit HSK

Applications Ordering Information
The airport lighting Heat Shrink Kit Upon the application of heat Catalog Number Description*
features a mechanically tough in excess of 275°F (135°C) the
sleeve quickly shrinks to a tight fit, 10047-1425 HSK (2-piece)
polyolefin heat-shrinkable sleeve.
conforming to the irregular shape of 10047-2154 HSK (1-piece)
The sleeve is designed so that one
diameter will fit all common L-823 the L-823 connector/ cable transition. * Both pieces contain the same total
connector/cable combinations The shrinking action causes the length of tubing: 16 inches (406 mm)
including cables as small as 0.360 sealant to melt and flow, forcing it
inch diameter. The 1-piece HSK into contact with the under-lying
sleeve is factory coated with a surfaces. Upon cooling, the sealant
waterproof sealant at the ends only, forms a positive barrier with high
leaving the L-823 connector clean adhesive strength. The process Shipping Weight: 0.5 lbs.
and re-enterable. The main purpose is complete when the sealant is 0.23 kg.
is to seal the L-823 connector/cable squeezed from the ends of the sleeve
joint, not to seal the plug/receptacle and the heat-sensitive paint on the Shipping Volume: 0.05 cu. ft.
outside of the sleeve changes color 0.0014 cu. m.
mating. The 2-piece HSK has sealant
the full length. from blue to gray.
The crosslinked polyolefin sleeve
provides excellent moisture, oil and Important Note:
fuel protection for L-823 connectors Use the 2-piece HSK for
used in L-868 and L-867 bases, or connections at the isolation
direct buried. The sleeves are tough transformer as illustrated below.
and withstand direct burial abuse. For cable-to-cable splices, use the
1-piece HSK to enclose the entire
connection.
Technical Data

Plug
Receptacle Tape Wrap L-823 Kit
By Others HSK Sleeve (2-piece)
Receptacle
Transformer Leads Plug

1. Slide the sleeve over cable 2. Pre-heat cable jacket. Begin 3. Shrinking is complete when
before making electrical shrinking at center, working melted sealant is squeezed
connection. Mate connector toward both ends. Use a back- from both ends of the sleeve
sections and wipe dirt from and-forth, sweeping motion of and all heat-sensitive paint has
connector and cable. Clean the torch. changed from blue to gray.
cable with solvent wipe.

www.chalp.com
4 . 34
CA
Cable Assemblies
Compliances: FAA AC 150/5345-26: L-823
FAA AC 150/5345-7: L-824
ICAO Annex 14 CA

Applications Ordering Information

Airfield lighting Cable Assemblies
are used when the lights and/or _ _ _
isolation transformers are installed C A
remote from the series primary cable
location. Cable Assembly:

Assembly Type:
Features P = Primary
• Uses FAA approved S = Secondary
L-823 connectors
• Uses FAA approved L-824 cables Connector Type:
1M = Secondary: 2-Conductor 600 volts
• Factory molded for watertight Style 1 Plug
connections between connectors Style 7 Receptacle
and cable 3M = Secondary: 2-Conductor 600 volts
• Any length available Style 1 Plug
Style 8 Receptacle
4M = Primary: 1-Conductor 5 kV
Primary CA Connector Configurations
† Style 2 Plug
Style 9 Receptacle

Connector Configuration*:
P = Plug
Style 2 Style 9 R = Receptacle

Cable Size†:

Power & Control Equipment

Secondary CA Connector Configurations A = Secondary: 2/12 AWG (4 mm2)
B = Secondary: 2/14 AWG (2 mm2)
C = Secondary: 2/16 AWG (2 mm2)
D = Secondary: 2/10 AWG (4 mm2)
Style 1 Style 7 F = Primary: 1/8 AWG (6 mm2)
G = Primary: 1/16 AWG (10 mm2)

Style 8 Length in Meters:

* If both ends of the cable are to be terminated, use two letters. If only one
end is to be terminated use only one letter. If the cable is only terminated
on one end, the other end will be unprepared.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 4. 35
 Notes

www.chalp.com
4 . 36
 SECTION 5

Guidance
Signs

APRON APRON

Z X
Z W

Z W

Z X

Z X
Y Z

Z 19-01 Z 19-01
Z 01-19 Z 01-19
Z 19 CAT III Z 19 CAT III
Z

Z
1

The safe and efficient movement of aircraft around the air- airfield lighting fixtures guidance signs allow the pilot to
field is of paramount importance. The FAA and ICAO have move efficiently around the airfield whether in New York,
set color, intensity, performance and location standards for Cairo or Beijing.
all airfield guidance signs. In concert with inset and elevated

Application Icon
Guidance Signs

Airfield
Guidance
Sign
 AGS-2
AIRPORT LIGHTING PRODUCTS

Airside™ Guidance Sign

Compliances: FAA AC 150/5345-44: L-858
Unified Facilities Criteria UFC 3-535-01 AGS-2
Applications Ordering Information
Airside™ signs Model AGS are How to Order: To determine the Order isolation transformer,
designed for use on airport taxiways number of modules to fit your transformer housing, coverplate and
to mark taxi routes and intersections. message, contact Crouse-Hinds. gasket or baseplate, and connector
Colors may be black on yellow, yellow For estimating purposes, use two kit separately. The colors of the
on black, or white on red depending characters per module. Do not count sign faces and the legends must
on the application as defined by the a 1 as a character except when the be specified for each sign. Multiple
governing standard FAA AC 150/5340- message contains an M or W. Maximum messages and colors may appear on
18. Black signs with white numerals are of four (4) modules per sign to comply a sign face.
used to indicate distance remaining in with the FAA specification.**
thousands of feet of runway.
Features 8 5 8
• ETL Certified
• 62W Lamp Fixture Type:
• Specification grade electrical system
• Power factor greater than 0.95 across
FAA Size:
all brightness steps
1 = Taxiway Sign, 30” High
2 = Taxiway Sign, 36” High
• Self-adjusting circuit board and internal 3 = Taxiway Sign, 42” High
transformer automatically maintains 4 = Distance Marker, 60” High***
illumination level and uniformity across 5 = Distance Marker, 42” High
all steps (common for 3 or 5 step)
• Relamp without removing sign cover Number of Faces:
• Modular design with uniform leg spacing 1 = Single Face
2 = Double Face
• One lamp per module
• Only one internal transformer per sign Brightness Levels:
• Slip-in sign faces without sealants 1 = FAA Class 1 & 2, Style 5 (Fixed, 5.5A)*
3 = FAA Class 1 & 2, Style 2 (3 Steps, 4.8 to 6.6A)
• Frangible couplings may be 5 = FAA Class 1 & 2, Style 3 (5 Steps, 2.8 to 6.6A)
pre-installed on pad and sign lowered
onto them for easy installation Number of Lamp Modules: 1 to 4
• Available with fixed brightness (5.5A)
for use on dedicated sign circuits Options:
• Enclosed power entry through sign leg or 10 = Unenclosed Power Cable: 3 Ft. with Plug
11 = Flexible Liquidtight Conduit Enclosed 3 Ft. Power Cable
• Enclosed power entry through flexible 12 = External Power Switch
liquidtight conduit (Option 11) 19 = Lamp Out Indicator
• External power disconnect switch breaks 20 = Additional Tether (Single module sign only)
all electrical connections to the sign for
safe maintenance (Option 12) * Use 33101, 33102 or 33103 isolation transformers only. Resistive load only.
Use step 2 of a 3-step regulator.
• Stainless steel tethers, two per sign ** 4 Module size 2 exceeds specifications by 0.6 inches.
except for one for single module. *** Size 4 Distance Marker provides 2 lamp modules—transformer to be sized accordingly.
Single module additional tether available
(option 20).
• High strength aluminum extrusion
housing

www.chalp.com
5.2
Technical Data
Airside™ Guidance Signs (AGS)
Measured Load (VA) & Power Factor (PF)

Isolation
Lamp Modules Transformer CCR VA* PF (min)
100W 5-Step 100 0.95
1
100W 3-Step 100 0.95
200W 5-Step 160 0.95
2**
200W 3-Step 160 0.95
300W 5-Step 230 0.95
3
300W 3-Step 230 0.95
300W* 5-Step 290 0.95
4
300W* 3-Step 290 0.95

* Applies to all FAA sizes, single and double face. Measured wattage exceeds the total of the lamp wattages due to the power
consumption of the sign’s internal electrical system, and isolation transformer.
** Includes FAA Size 4 distance marker sign.

Dimensional Information
Floor Flange 25684-1
4.75 (121) Bolt Circle

Four Holes
0.625 (15.8) Diameter

2-11.5 NPS Threaded Hub

6.0 (152) Diameter

Dimensions: inches
(mm)

Shipping Weights and Volumes

Modules
1 2 3 4
lbs. cu.ft. lbs. cu.ft. lbs. cu.ft. lbs. cu.ft.
(kg.) (cu.m.) (kg.) (cu.m.) (kg.) (cu.m.) (kg.) (cu.m.)
65 5.7 130 11.4 195 17.1 260 22.8
1
(29.5) (0.16) (59.0) (0.32) (88.5) (0.48) (118) (0.65)
Guidance Signs

90 8.5 180 17.0 270 25.5 360 34.0

2
(40.8) (0.24) (81.6) (0.48) (122.5) (0.72) (163.3) (0.96)
Size

115 11.3 230 22.6 345 34.0 460 45.3

3&5
(52.2) (0.32) (104.3) (0.64) (156.5) (0.96) (208.7) (1.28)
145 26.5 ___ ___ ___ ___ ___ ___
4
(65.8) (0.75)

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 3
 Side View* Front View (Side A)

9.77˝ 2.30˝ D D
(248) (58)

Typical 2-Module Sign

C (Sizes 1, 2, 3 & 5)
E

**

7.52˝ B B Tether
(191) (Typ.)
B A A A B

Side View* Front View (Side A)

9.77˝ 2.30˝
(248) (58)
D

Sign Power Leg Orientation

When facing side A, the power
entry is on the right. Orders
should always specify the
message orientation.
C Distance Marker
* Typical for all signs. Size 4
** The sign includes floor flanges E
for all legs. Installation may vary:
See the manual.

Dimensions: inches
(mm)
7.52˝
(191) **
Size
Instruction Manual: 9211 1,2,3,5
9213 4
B A1 A A1 B

Dimensions
A A1 B C D E
14.60 __ 7.30 19.50 29.20 29.05
1
(371) (185) (495) (742) (738)
18.20 __ 9.10 25.50 36.40 35.05
2**
(462) (231) (648) (925) (891)
Size

20.90 __ 10.45 31.50 41.80 41.05

3 & 5
(531) (265) (800) (1062) (1043)
26.00 7.00 4.00 48.00 48.00 57.55
4
(660) (178) (102) (1219) (1219) (1462)
** 4 module size 2 exceeds specifications by 0.6 inches.

www.chalp.com
5.4
Installation Details
Elbow Mounting Detail Steel Base Mounting Detail
Sizes 1, 2, 3, & 5

25003 60728-1
l-823 Style 7 Cable Clamp 25684-1
Tether
Secondary Floor Flange
(See page
40762 l-823 Style 8 Surface of AK100006 FT-1.2 for
retainer Secondary Concrete Pad Cover Flange Details)

Top of Base
40799-P-2 Flush with See Details
elbow Concrete methods A and B
“elbow with Pad 12.79˝
Coupling”
l-867
Steel Base – lower Surface of
24˝ Do Not Gasket Base Flange to be
the Base level with Concrete
Detail Detail
Method “A” Method “B”

25003 and (2) 40762

are supplied with each sign.
Steel or Plastic 17.50˝ Approx.
Transformer Base

Accessories
Shipping Weight Shipping Volume
Part Number Description Lbs. Kg. Cu.Ft. Cu.M.

33004 Isolation Transformer 100 watts, 6.6/6.6A 12.0 5.4 0.4 0.011
33101 Isolation Transformer 100 watts, Style 5 (fixed brightness) 5.5/6.2A 12.0 5.4 0.4 0.011
33006 Isolation Transformer 200 watts, 6.6/6.6A 16.0 7.3 0.4 0.011
33102 Isolation Transformer 200 watts, Style 5 (fixed brightness) 5.5/6.2A 16.0 7.3 0.4 0.011
33103 Isolation Transformer 300 watts, (fixed brightness) 5.5/6.2A 16.0 7.3 0.4 0.011
33010 Isolation Transformer 300 watts, 6.6/6.6A 23.0 10.4 0.6 0.017
AP1932* Baseplate, 2 inch Hub 8.0 3.6 0.14 0.004
AC21242HX00301* Base L-867, Class 1, 24 inches deep 52.0 23.6 2.6 0.074
AK100006 Coverplate, 0.375 inches thick 5.0 2.3 0.13 0.004
900152* Base L-867, Class II (PLASTIC), 24 inches deep 16.0 7.3 2.6 0.074
10530287 Gasket for Coverplate
823KP-D4-D4 Primary L-823 Connector Kit
26811-27 Consolidating Harness
CAS1M-PR-B-2 Secondary Cable Assembly, 2 meters**

* If the power leg is baseplate mounted directly on a base, only the AC21242HX00301 may be used with no gasket for the baseplate AP1932 to
insure equal breakaway with the other legs. The base must be installed per the instruction manual, approximately 3/8 inch high with the lower
edge of the base top flange level with the concrete. If the sign power leg is elbow mounted, base 900152 has conduit entries in the required
positions.
** Other lengths available. The sign includes cable clamp 25003 and two 40762 retainers.

Renewal Parts
Part Number Description Part Number Description

20590 Lamp 62 watts, 6.6A 61143 Internal Transformer

25684-1 Floor Flange 60638 Lamp Cover Cap
62245-1 Frangible Coupling: Size 1 60685-X** Light Tube Assembly
62245-2 Frangible Coupling: Size 2 61107 Lamp Socket
62245-3 Frangible Coupling: Size 3 61107 Lamp Socket
62245-5 Frangible Coupling: Size 5 61107 Lamp Socket
60683-11 Frangible Coupling: Size 4 60639 Lamp Cover Cap Gasket
Guidance Signs
CAS1M-P-B-.86 Lead Assembly 60728-1 Tether
61153-1*** Circuit Board: 3-step, 5-step
60667* Sign Face, Retroreflective
60668* Blank Panel

* Dash number required for size and number of modules (contact factory). Add description of color and legend.
** Insert dash number 1 or 2 or 3 for sign size 1 or 2 or 3 accordingly.
*** Only compatible with 61143 internal transformer.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 5
 AGSF
AIRPORT LIGHTING PRODUCTS

Airside™ Guidance Sign

Fiberglass
Compliances: FAA AC 150/5345-44: L-858
Unified Facilities Criteria UFC 3-535-01 AGSF
Applications Ordering Information
AGSF Signs are designed for use on How to Order: List the basic catalog The colors of the sign faces and the
airport runways to mark taxi routes number for single or double faced sign legends must be specified for each
and taxiways/runways intersections. and add suffixes for sign length. Order sign. Multiple messages and colors
Colors may be black on yellow, yellow isolation transformer, transformer may appear on a single seamless
on black, or white on red depending housing, coverplate and gasket or sign face.
on the application as defined by the baseplate separately.
governing standards such as FAA AC
150/5340-18.
Features
• ETL Certified
• FAA Approved as Size 3, Class 1 sign
• One sign meets FAA styles 2*, 3**,
and 5***
Basic Catalog Number:
60915 (Single Face)
• Stainless steel tethers 62055 (Double Face)
• Power factor greater than 85% across
all brightness steps Sign Length:
• Uses fluorescent long life lamp 4 = 4 Feet, FAA Size 3 (42” high) sign.
6 = 6 Feet, FAA Size 3 (42” high) sign.
• Internally illuminated 8 = 8 Feet, FAA Size 3 (42” high) sign.
• Lamps commercially available 10 = 10 Feet, FAA Size 3 (42” high) sign.
• Externally mounted Ballast Assembly for 12 = 12 Feet, FAA Size 3 (42” high) sign.
easy maintenance D = 4 Foot, FAA Size 5 (42” high) Distance Marker (25” high numerals).
• External power disconnect switch allows * Powered by 3 steps (4.8 to 6.6A) circuit.
safe maintenance by isolating sign from ** Powered by 5 steps (2.8 to 6.6A) circuit.
series circuit *** Powered by fixed step (5.5A) circuit.

• Lamp bypass circuit for Ballast protection

• Reinforced fiberglass housing
• Hinged sign face for easy relamping
• No tools needed to replace Lamps
• Electrical connection fits baseplate
with 2” hub

www.chalp.com
5.6
Technical Data
Instruction Manual: 9424

Airside™ Guidance Signs - Fiberglass (AGSF)

Measured Load (VA) & Power Factor (PF)

Sign Catalog Number Isolation Transformer VA PF

60915-4 100 Watts 54 .85
60915-6 100 Watts 66 .87
60915-8 200 Watts 130 .85
60915-10 200 Watts 130 .85
60915-12 200 Watts 163 .88
62055-4 100 Watts 79 .87
62055-6 200 Watts 163 .88
62055-8 200 Watts 163 .88
62055-10 200 Watts 163 .88
62055-12 300 Watts 221 .85

Lamp Cross-Reference Table

Crouse-Hinds
Reference Sign Number of Lamps Lamp Part Standard
Catalog Number Per Sign Number Fluorescent Lamp Lamp Wattage
60915-4 1 10047-2523 F24T12/D/HO 35 Watts
60915-6 1 10047-2524 F36T/12/SGN/HO 45 Watts
60915-8 2 10047-2523 F24T12/D/HO 35 Watts
60915-10 2 10047-2524 F36T12/SGN/HO 45 Watts
60915-12 2 10047-2524 F36T12/SGN/HO 45 Watts
62055-4 1 10047-1573 F36T12/CW/HO 45 Watts
62055-6 2 10047-2524 F36T12/SGN/HO 45 Watts
62055-8 2 10047-1573 F36T12/CW/HO 45 Watts
62055-10 2 10047-1573 F36T12/CW/HO 45 Watts
62055-12 3 10047-1573 F36T12/CW/HO 45 Watts
Guidance Signs

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 7
 Dimensional Information AIRPORT LIGHTING PRODUCTS

Dimensions: inches
(mm)
15˝ 17.75˝
(381) (451)

Ballast
Assembly

33.12˝
(841)
42˝
(1067)

Ballast
Assembly

Typical Breakable Coupling

on Floor Flange

Power Cord

Single Face Sign Double Face Sign

Typical Side View Outlines for 4, 6, 8, 10 and 12 Feet Signs

36˝ (914) Power Cord

Typical

Front View Outline

Shown with 8 legs on 12 feet sign

l-867 Base

18" 18"
(457) (457)
9.75" 24" (610)
(248)

2"
(61)

l-867 Base
Foot Print Information
4 Legs Layout (from right to left) for 4 and 6 feet signs.
6 Legs Layout (from right to left) for 8 and 10 feet signs.
8 Legs Layout (from right to left) for 12 feet signs.

www.chalp.com
5.8
Installation Details
Elbow Mounting Detail Base Mounting Power Feed Detail

25003 Power Cord

from Sign 2˝ Breakable Coupling
L-823 Style 7 Cable Clamp P/N 50184, Standard
Secondary Baseplate P/N (1-1/2˝ Breakable
40762 Surface of AK100006 AP1932, Standard Coupling P/N 50186,
L-823 Style 8 Optional)
Retainer Secondary Concrete Pad Cover (Baseplate P/N
AP1935, Optional)
Top of Base
40799-P-2 Flush with See Details
Elbow Concrete Methods A and B
“Elbow with Pad 12.79˝
Coupling” Cable
Clamp From Isolation
L-867 Transformer
24˝ 12˝ Dia.
Light Base
Detail Detail
Method “A” Method “B”

25003 and (2) 40762

are supplied with each sign.
Steel or Plastic 17.50˝ Approx.
Transformer Base

Accessories
Shipping Weight Shipping Volume
Part Number Description Lbs. Kg. Cu.Ft. Cu.M.

33004 Isolation Transformer 100 watts, 6.6/6.6A 12.0 5.4 0.4 0.011
33006 Isolation Transformer 200 watts, 6.6/6.6A 16.0 7.3 0.4 0.011
33010 Isolation Transformer 300 watts, 6.6/6.6A 23.0 10.4 0.6 0.017
AP1932 Baseplate, 2 inch Hub 8.0 3.6 0.14 0.004
AC21242H200301 Base L-867, Class 1, 24 inches deep 52.0 23.6 2.6 0.074
AK100006 Blank Coverplate, 0.375 inches thick 5.0 2.3 0.13 0.004
10530287 Gasket for Coverplate
823KP-D4-D4 Primary L-823 Connector Kit
CAS1M-PR-B-2 Secondary Cable Assembly, 2 meters*

* Other lengths available.

Renewal Parts Shipping Weights and Volumes

Part Number Description Sign Shipping Weight Shipping Volume
Cat. Number Lbs. Kg. Cu. Ft. Cu. M.
25684-1 Floor Flange
61062 Frangible Coupling: For Single Face Signs 60915-4 or D 115 52 20 0.57
61066 Frangible Coupling: For Double Face Signs 60915-6 140 64 30 0.85
50184 Frangible Coupling: For Power Feed 60915-8 210 95 45 1.27
50186 Frangible Coupling: For Power Feed, Optional 60915-10 235 107 55 1.56
61106 Ballast (One Per Lamp) 60915-12 310 141 65 1.84
10047-2523 Fluorescent Lamp, 24”* 62055-4 or D 155 70 25 0.71
10047-2524 Fluorescent Lamp, 36”* 62055-6 205 93 35 0.99
10047-1573 Fluorescent Lamp, 36”* 62055-8 290 132 50 1.42
60984 Tether 62055-10 370 168 60 1.70
60992-X-L Sign Face & Frame Assembly** 62055-12 440 200 75 2.12
61093-X Sign Face Assembly**

* Refer to Lamp cross-reference table on page 5.11.

** Insert 4, 6, 8, 10, or 12 in place of “X” to indicate sign length (feet).
Guidance Signs

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 9
 AGSI
AIRPORT LIGHTING PRODUCTS

Airside™
Guidance Sign ICAO
Compliances: ICAO Annex 14 AGSI
Applications Ordering Information
ICAO Airside™ signs Model AGSI are How to Order: To determine the Order isolation transformer,
designed for use on airport taxiways exact number of modules to fit your transformer housing, coverplate and
and runways to mark taxi routes and message, contact Crouse-Hinds. To gasket or baseplate, and connector
intersections. Colors may be black on construct the catalog number, insert kit separately. The colors of the
yellow, yellow on black, or white on appropriate numerical code for sign sign faces and the legends must
red depending on the application as size, number of faces and number of be specified for each sign. Multiple
defined by ICAO, Annex 14. lamp modules, as shown below. Add messages and colors may appear on
option numbers as required. a sign face.
Features
• The extruded aluminum sign is designed 8 1 4
in accordance with U.S. FAA Standards for
structural integrity
• White exterior standard
• Metric hardware Type:
• ETL certified ICAO illumination levels
Size:
• Long life fluorescent lamps 3 = Sign, 300 mm Legend Height
• Modular design with uniform leg spacing 4 = Sign, 400 mm Legend Height
• Two lamps per module
Number of Faces:
• Slip-in sign faces with translucent 1 = Single Face
messages 2 = Double Face
• Frangible couplings may be
pre-installed on pad and sign lowered Number of Lamp Modules: 1 to 4*
onto them for easy installation
• Enclosed power entry through Options:
sign leg or 10 = Unenclosed Power Cable: 3 Ft. (0.9m) with Plug
11 = Flexible Liquidtight Conduit Enclosed 3 Ft. (0.9m) Power Cable
• Enclosed power entry through flexible 13 = Tethers (2)
liquidtight conduit (Option 11) Y = Yellow Exterior
• External power disconnect switch breaks
all electrical connections to the sign for * Maximum of (4) Modules for sign. If more modules are required,
safe maintenance two signs may be co-located.

• Operates from a 3 or 5 step series lighting

circuit (2.8 to 6.6 Amperes)
• Operating temperature: –20C to +55C

www.chalp.com
5 . 10
Technical Data
Instruction Manual: 2508

ICAO Airside™ Guidance Signs (AGSI)

Measured Load (VA) & Power Factor (PF)

*Small CCR (Series Type) *Large CCR (Shunt Type)

Lamp Isolation Transformer
Modules (Wattages) VA PF VA PF
1 150w 150 .68 140 .87
2 300w 335 .71 295 .87
3 400w** 460 .72 426 .87
4 2 x 300w 600 .78 575 .87

* Select appropriate data depending whether on a circuit is powered by CROUSE-HINDS small CCR (4, 7.5 & 10KW) or large CCR
(10KW shunt type & larger).
** Use 400w transformer (33154) or two 200w transformers (33006) with consolidating harness (26811-27)

Average Sign Illuminance* at Full Brightness

Color
Size Red Yellow White
300mm 111(32.4) 582 (170) 931 (272.3)
400mm 106 (30.8) 465 (135) 668 (195.6)

* CD/M2 (FOOT-LAMBERTS)

Average Sign Illuminance at Various Intensity Steps

6.6 Amperes = 100% (Full Brightness—CCR Top Step)
5.5 Amperes = 84%
5.2 Amperes = 80%
4.8 Amperes = 75%
4.1 Amperes = 62%
3.4 Amperes = 48%
2.8 Amperes = 35%

Note:  The above data may vary depending on the type and manufacturer of constant current
regulator (CCR) and circuit loading.

Guidance Signs

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 11
 Dimensional Information AIRPORT LIGHTING PRODUCTS

D D 251
mm

ON/OFF
C SwITCH

POwer leG

B A A A B
Side View
Typical 2-Module Sign, Front View (Side A) (Typical for all signs)

Sign Power Leg Orientation Legend Size A B B C D

When facing side A, the power 1 Mod 2 Mod
entry is on the right. Orders
should always specify the 300mm 500mm 217mm 183mm 827mm 933mm
message orientation.
400mm 500mm 217mm 183mm 1025mm 933mm

Dimensions: Millimeters, Instruction Manual: 2508. For signs manufactured prior to 2005, refer to
manual 9604 for replacement parts and sign housing footing drawings.
Foot Print Information
2 Legs per module.
FOur mODule THree mODule TwO mODule ONe mODule
SIGN SIGN SIGN SIGN
TYPICAl FlOOr
FlANGe 305mm

610
mm

CONCreTe PAD 500mm l-867 BASe

(TYPICAl) (SuGGeSTeD
lOCATION)
elBOw
Shipping Weights and Volumes:

Modules
1 2 3 4
lbs. cu.ft. lbs. cu.ft. lbs. cu.ft. lbs. cu.ft.
(kg.) (cu.m) (kg.) (cu.m) (kg.) (cu.m) (kg.) (cu.m)
NOTE: For estimating sign
(Legend Height)

90 8.5 180 17.0 270 25.5 360 34.0 length, use two characters
300 per module. Do not count a
(40.8) (0.24) (81.6) (0.48) (122.5) (0.72) (163.3) (0.96)
Sign Size

dot, dash, or 1 as a character

except when the message
contains an M or W.
115 11.3 230 22.6 345 34.0 460 45.3
400
(52.2) (0.32) (104.3) (0.64) (156.5) (0.96) (208.7) (1.28)

www.chalp.com
5 . 12
Installation Details
Elbow Mounting Detail: 40762 Retainer
25003 Cable Clamp

L-823 Style 7
Secondary Surface of
Concrete Pad
L-823 Style 8 AK100006 Cover
Secondary

Top of Base
Flush with 12.79”
40799-P-2 Elbow (325mm)
Concrete Pad

(610mm) 24’’

See Details
Detail Detail
Method “A”
Methods A and B
Method “B”

25003 and (2) 40762 are supplied with each sign.

AC21242H200301 17.50”
Transformer Base
(445mm)
Accessories Approx.

Shipping Weight Shipping Volume

Part Number Description Lbs. Kg. Cu.Ft. Cu.M.

33150 Isolation Transformer 150 watts, 6.6/6.6A 16 7.3 0.4 0.011

33006 Isolation Transformer 200 watts, 6.6/6.6A 16 7.3 0.4 0.011
33010 Isolation Transformer 300 watts, 6.6/6.6A 23.0 10.4 0.6 0.017
33154 Isolation Transformer 400 watts, 6.6/6.6A 23.0 10.4 0.6 0.017
AK100006 Coverplate, 0.375 inches thick 5.0 2.3 0.13 0.004
AC21242H200301 L-867B Transformer Base, 24 inches deep 16.0 7.3 2.5 0.074
10530287 Gasket for Coverplate
823KP-D4-D4 Primary L-823 Connector Kit
26811-27 Consolidating Harness
CAS1M-PR-B-2 Secondary Cable Assembly, 2 meters*
60728-1 Tether

* Other lengths available.

Renewal Parts
Part Number Description

62245-3 Frangible Coupling for sign with 400 mm length height

60683-8 Frangible Coupling for sign with 300 mm length height
10047-2391 Socket, Plunger End
10047-2392 Socket, Stationary End
10047-1573 Fluorescent Lamp, 36”
61164 Ballast Assembly
61065-4 Lamp Bypass P.C. Board
62217-1 Sign Panel, 400mm, Single Module
62217-2 Sign Panel, 300mm, Single Module
62217-3 Sign Panel, 400mm, Double Module
62217-4 Sign Panel, 300mm, Double Module Guidance Signs

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 13
 AGSU
AIRPORT LIGHTING PRODUCTS

Airside™ Guidance Sign-

Unlighted
Compliances: FAA AC 150/5345-44: L-858 AGSU
Applications Ordering Information
AGSU Signs are designed for use on
airport runways to mark taxi routes
8 5 8 F 4 – – –
and taxiways/runways intersections.
Colors may be black on yellow, yellow
on black, or white on red depending
on the application as defined by the
Basic Catalog Number:
governing standards such as FAA AC
150/5340-18.
Size:
1 = 18” High Panel with 12” Legend
Features 2 = 24” High Panel with 15” Legend
3 = 30” High Panel with 18” Legend
• ETL Certified
as Style 4, Class 2, Mode 2 Sign
Number of Sides:
(200 mph wind loads).
S = Single
• High strength aluminum sign panel. D = Double
• Durable, highly reflective sheeting.
Length (Double Sided Signs Will Be Of Equal Length On Both Sides):
• Stainless steel tether and hardware.
4 = 4 Foot Long Panel*
6 = 6 Foot Long Panel*

Outline Drawing
48.0 (1219) SIGN PANel, FOr rePlACemeNT FACe
Dimensions: inches
(mm) SPeCIFY P/N 62206 - leNGTH (4 Or 6 FT)
) 24.0 (610)**
SIZe (1, 2 Or 3) - AND leGeND
Instruction Manual: 2118 reFleCTOr (SINGle FACe SIGNS ONlY)
NAme PlATe
Shipping Weight: 67 lbs. FrANGIBle leG
(6 foot signs) 30 kg P/N 62202-1, SIZe 1
P/N 62202-2, SIZe 2
Shipping Weight: 50 lbs. 18.0 (457), SIZe 1 P/N 62202-3, SIZe 3
(4 foot signs) 23 kg. 24.0 (610), SIZe 2
30.0 (762), SIZe 3
*Contact sales to determine
Shipping Volume: 15 cu. ft. legend panel size.
(6 foot signs) .92 m3

Shipping Volume: 10 cu. ft.

(4 foot signs) 28 m3
FlOOr FlANGe
6.0 (152)
P/N 60831***
4.75
(121) TeTHer 24.0 (610) lONG
**6 FOOT SIGN HAS 3 leGS ON 24.0 (610) CeNTerS. P/N 60728-1
***FurNISHeD wITH TwO mOuNTING SlOTS
FOr 1/2 INCH ANCHOr BOlTS.

BACK vIew OF SIGN (4 FOOT SIZe 3 SHOwN)

www.chalp.com
5 . 14
DMS
Distance Marker Sign
Compliances: FAA AC 150/5345-44: L-858 (Size 4)
Unified Facilities Criteria UFC 3-535-01 DMS
Applications Ordering Information*
The DMS is an internally lighted
double-faced sign with White
8 5 8 B F –
Retroreflective numerals on Black
Background ­indicating to the pilot the
runway ­distance remaining in 1000
ft. ­increments. Distance Marker Signs
may be installed on one or both sides
of the runway. Contact Crouse-Hinds
for actual VA load on the series circuit. Basic Catalog Number:
Features Options:
• ETL Certified (Size 4) C/C = Arresting Cable Marker: 39 inch Yellow Circles
• Internally illuminated
* Order numerals for each DMS by description
• Uses fluorescent lamp
• Fiberglass Housing
• Electrical connection fits baseplate with 2
inch hub
• Operates on 100 watt transformer Renewal Parts
• Includes floor flanges and frangible Part Number Description
couplings
61066-1 Frangible Coupling
• Disconnect Switch on housing 25684-1 Floor Flange
61093-D Sign Face Only (specify legend)
• Hinged Sign Face
10047-1573 Fluorescent Lamp (-3, -5 versions)
• Stainless steel tethers 10047-2391 Fluorescent Lamp Socket (-3, -5 versions)
10047-2392 Fluorescent Lamp Socket (-3, -5 versions) – Stationary End
61106 Ballast (-3 and -5 versions)
Outline Drawing 60984 Stainless Steel Tether

48
(122)

Mounting Leg Layout

54 (137)
Guidance Signs
48 inches
to (122) Dimensions:
60 (152)
(mm)
Instruction Manual: 9423 36 9.75
(91) (25)
Shipping Weight: 180 lbs. 82 kg.

Shipping Volume: 38 cu.ft. 1.4 cu.m. Four 0.625 Holes on

4.75 Diameter Bolt Circle

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 5. 15
 Notes

www.chalp.com
5 . 16
 SECTION 6

Tools
& Markers

Tools & Markers

 TOOLS
AIRPORT LIGHTING PRODUCTS

Tools and Accessories

TOOLS
Ammeters for Constant Current Series Circuits
Constant current regulators (CCRs) produce non-sinusoidal waveforms. Traditional
ammeters reading the average current will produce inaccurately low values
on airfield lighting circuits. Calibrating equipment based upon these incorrect
readings may dramatically reduce the lamp life for airfield lighting and adversely
affect equipment performance.

For constant current airfield lighting circuits, only a true-rms meter with current
clamp accessory must be used to accurately indicate the current present. Such
meters include selected models manufactured by:

Beckman Industrial Fluke Simpson B&K Precision Circuitmate

Special Tools for Crouse-Hinds Airport Lighting Products

Catalog Number Description Purpose

10036-39 Impact Driver Loosens tight screws, when struck with a hammer.
Useful for taxiway centerline lights.
10036-36 Cable Penciller Prepares the ends of FAA L-824 Type C cable for connector kits.
20047 Contact Straightener Straightens the female contacts of TCL optical cartridges.
19583 Setting Jig For setting base type ALB L-868, Class I, Size B, for 12˝ diameter fixtures.
20628 Setting Jig For setting base type GSB L-868, Class II, Size B, for 12˝ diameter fixtures.
19999 Lifting Handle For easy lifting of 12˝ diameter inset lights.
19388 Lifting Handle For easy lifting of inset lights: HAL, HTL (FAA-E-2491).
20476 Lifting Handle For easy lifting of inset lights: TOL (10.24 Inch Bolt Circle only).
40664 Lamp Extractor Provides an easy means to remove quartz lamps from edge lights.
25220 PAPI Clinometer Aiming Set for PAPI-2688X systems.
25057 PAPI Tilt Level Tilt Level for PAPI-2688X systems.
50420 Lamp Extractor Unlocks and removes Quartz lamps from HRLQ-5 edge lights.
50359 Leveling Tool HRLQ-5 Levels HRLQ-5 edge lights.
21162 Installation Fixture For setting 8˝ shallow base part number 21136.
40999 Leveling Tool HRLQ/ERL Levels and aligns part number Series 40938, 40939, 40943 and
HRLQ-4 fixtures.

www.chalp.com
6.2
Tools
10036-39 Impact Driver 20047 Contact Straightener

50029 Leveling Tool-ERL 40664 Lamp Extractor

LEVELING
TOOL

10036-36 Cable Penciller 19583 Setting Jig

Tools and Markers

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 6. 3
 TEK-TOOLS
AIRPORT LIGHTING PRODUCTS

Crimping Tools
TEK-TOOLS
Applications
TEK-Tools are used for primary and secondary connector kits (Crouse-Hinds connector kits only).

Features
• Ratchet action prevents release until proper pressure has been applied to terminal,
ensuring proper connection of terminal to wire or cable.
• Easy to operate emergency jaw release.
• Designed to perform 5000 cycles prior to requiring check of crimp pressure or calibration.
• Embossed die nests with gauge marking to identify terminals crimped with TEK-Tools.
Tool Catalog Number Selection Table
Catalog Number* DIE AWG GAUGE A (±0.05) PRELOAD (±15N) HANDLE COLOR DIE NEST MARK 

33228-6 6 6.2 150 Green CH6

33228-8 8 5.6 170 Red CH8
33228-12 12 4.0 200 Yellow CH
33228-1614 16-14 3.33 140 Blue C

* Refer to outline drawings for details (below).

* *

* Instruction Sheet: 2709

www.chalp.com
6.4
Notes

Tools and Markers

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 6. 5
 FC
AIRPORT LIGHTING PRODUCTS

Frangible Couplings FC
Threading DIMENSION (INCHES)

Type T-Inside T-Outside B-Outside H H1* D Finish Application

60647-1 Straight None None 2-111/2 NPSM 5.803 H 1.939 Natural Aluminum Sign (AGS-1)
60647-2 Straight None None 2-111/2 NPSM 5.803 H 1.939 Natural Aluminum Sign (AGS-1)
60647-3 Straight None None 2-111/2 NPSM 5.803 H 1.939 Natural Aluminum Sign (AGS-1)
60647-4 Straight None None 2-111/2 NPSM 5.803 H 1.939 Natural Aluminum Sign (AGS-1)
60683-E Straight None None 2-111/2 NPSM 3.330 1.49 1.200 Painted Yellow ERL,-HRLQ
60683-4 Straight None None 2-111/2 NPSM 5.770 — — Natural Aluminum Sign (AGS-2)
60683-5 Straight None None 2-111/2 NPSM 5.770 — — Natural Aluminum PAPI
60683-6 Straight 5/8-18 UNF None 2-111/2 NPSM 5.770 — — Natural Aluminum Sign (Fiberglass)
60683-7 Straight 5/8-18 UNF None 2-111/2 NPSM 5.770 — — Natural Aluminum PAPI
60683-8 Straight None None 2-111/2 NPSM 5.770 — — Natural Aluminum Sign (ICAO)
60683-9 Straight 1-111/2 NPT None 2-111/2 NPSM 5.770 — — Natural Aluminum PAPI
60683-10 Straight None None 2-111/2 NPSM 5.770 — — Natural Aluminum RGL
60285-1 Tapered None 2-111/2 NPT 2-111/2 NPT 4.000 H 1.939 Natural Aluminum Sign (AGS-Canada)
60285-2 Tapered None 2-111/2 NPT 2-111/2 NPT 4.000 H 1.939 Natural Aluminum Sign (AGS-Canada)
60285-3 Tapered None 2-111/2 NPT 2-111/2 NPT 4.000 H 1.939 Natural Aluminum Sign (AGS-Canada)
60287 Tapered None None 2-111/2 NPT 3.875 1.960 2.000 Natural Aluminum Sign
62245-1 Straight None None 2-111/2 NPSM 5.770 ­— — Natural Aluminum Sign (AGS-2)
62245-2 Straight None None 2-111/2 NPSM 5.770 ­— — Natural Aluminum Sign (AGS-2)
62245-3 Straight None None 2-111/2 NPSM 5.770 ­— — Natural Aluminum Sign (AGS-2)
62245-4 Straight None None 2-111/2 NPSM 5.770 ­— — Natural Aluminum Sign (AGS-2)
62245-5 Straight None None 2-111/2 NPSM 5.770 ­— — Natural Aluminum Sign (AGS-2)
P1206 Tapered None None 2-111/2 NPT 5.250 3.563 2.100 Natural Aluminum Canada
P1211 Tapered None None 2-111/2 NPT 7.625 H 2.100 Painted Orange Canada
P1215 *** 1.25-16 None 2-111/2 NPT 3.875 1.813 1.500 Natural Aluminum Canada
FL949A Tapered None None 2-111/2 NPT 4.750 3.000 1.813 Painted Yellow ELM, HRL (Military)
FL971 Tapered None 2-111/2 NPT 2-111/2 NPT 4.750 3.000 1.813 Painted Yellow PAPI
50306 Straight None None 2-111/2 NPT 6.380 Painted Yellow Elev. Stop Bar
40818 Tapered None None 2-111/2 NPT 3.719 H 1.750 Natural Aluminum Canada
61062-1 Straight None 213/32-16 UNF 2-111/2 NPT 5.062 2.125 2.187 Natural Aluminum Sign (Fiberglass)
50186 Straight None None 11/2 -12 UNF 3.070 1.500 1.190 Painted Yellow ERL, HRLQ
50049 Straight None None 11/2 -12 UNF 2.690 1.500 1.174 Yellow Plastic ERL, HRLQ
50184 Straight None None 2-111/2 NPSM 3.250 1.475 1.190 Painted Yellow ERL, HRLQ
ML4913 Tapered None None 2-111/2 NPT 4.750 3.000 1.813 Natural Aluminum Wind Cone
62202 Straight None None 2-111/2 NPSM 22.500 — — Natural Aluminum Unlighted Sign

* H indicates a full length straight through interior The use of these couplings in non-approved applications should be checked
** Static Load Test Data Not Available. Contact Crouse-Hinds. with Crouse-Hinds Engineering department.
*** Tapered at bottom; straight inside. Couplings intended for use in application listed. Use of couplings in applications
not listed at risk of user and may result in premature or catastrophic failure.
Dimensional Information
6.00 DIA 7.88
D
4.75 DIA FC 4.75
T

WINDSOR CT USA

H1 PARALLEL TO

4.88
60831

CENTER-
LINE

CROUSE - HINDS
H P/N 25684-1

2 - 11 1/2 NPSM THREAD

2 - 11 1/2 NPSM THREAD
.63 x .94 SLOT, 2 PLACES
.63 DIA, 4 HOLES

B
FLOOR FLANGE 25684 - 1 FLOOR FLANGE 60831

NOTE: FOR 1-1/2 UNF COUPLING, ADD REDUCER 5925

www.chalp.com
6.6
 25684-1 60285 62245
Floor Flange

FL971 60287 FL2788A 60647

60288 FL949A

Note: Not To Scale.

* Superseded part
number.
Tools and Markers
61062-1 50186 50049 50184
(10037-108)*

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 6. 7
 TRM
AIRPORT LIGHTING PRODUCTS

Taxiway Reflective
Marker
Compliances: FAA AC 150/5345-39: L-853
NASAO Guidelines

TRM
Applications Ordering Information
TRM tubular retroreflective markers How to Order: Reflective material on
are used to mark the edges of post is based on the intended airport
taxiways and ramps at airports location as indicated below. Select
and heliports. They are particularly post height and mounting style as
useful for taxiways with centerline required.
lights that do not have edge
lights. For all airports, TRM markers
provide daytime delineation of the
operational areas. Therefore, they S H 6 – – – – 1 4
are often used to supplement edge
lighting systems. All TRM markers
feature a white tubular post and a
14” reflective material height. Fixture Type:*

Features Post Height:

• FAA approved* 18, 24, or 30 inches
• Inexpensive Mounting Style:
Low initial cost, easy to install, SMA = Surface Mount, Pin Lock Base
no wiring, requires no power and SMT = Surface Mount, Twist Lock Base
practically maintenance free. GP1 = Concrete Open End Anchor - 8 inches
• Durable GP3 = Soil Closed End Anchor - 18 inches
Both the post and the reflectors remain GP4 = Soil Open End Anchor - 18 inches
flexible at temperature extremes.
• Highly Visible Post/Reflector Colors:
Brilliant post colors provide 360 degree WB = Taxiway Edge Marker
daytime visibility, high intensity White Post/Blue Reflective
reflectors provide 360 degree nighttime WS = Runway Edge Marker
visibility. White Post/Silver(White) Reflective
WR = Runway End Marker
• Safe White Post/Red Reflective
No damage to aircraft or vehicles if WG = Runway Threshold Marker
struck. White Post/Green Reflective

Reflective Material Height:

14 = 14” descending from top of post

* TRM Markers are FAA approved by manufacturer Safe-Hit Corporation.

www.chalp.com
6.8
 Soil Anchor Mounting
Installation Drawings

Surface Mounting 14” Reflective

Surface
Pin Lock Base

4.25
(108)
Side
View
1.88
(48)

8.00
(203)

Surface Mounting
Twist Lock Base

4.25
(108)
Side
View
1.88
(48)

8.00
(203)

Renewal Parts
Part Number Description

SHA1-08OE-GL Concrete Open End Anchor 8 inches

SHA3-018C-GL Soil Closed End Anchor 18 inches
SHA4-018E-GL Soil Open End Anchor 18 inches
Dimensions: inches
SHSMA-1-BL Surface Mount Pin Lock Base (mm)
SHSMT-1-BL Surface Mount Twist Lock Base
Shipping Weight: 3.0 lbs. Tools and Markers
1.4 kg.
Note: For replacement tube only, order complete catalog
number from GT-5.4 and add -T at the end.
Shipping Volume: 0.2 cu.ft.
.006 cu.m.

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 6. 9
 Notes

www.chalp.com
6 . 10
 SECTION 7

Airport
Light Bases

Airport Light Bases

 ALB
AIRPORT LIGHTING PRODUCTS

Airport Light Bases

Compliances: FAA AC 150/5345-42: L-867 & L-868, Class I
UFC 3-535-01
NAVAIR 51-50AAA-2 ALB
Applications FAA TYPE In addition to the bases there are also
L-867 A base not subjected to heavy base plates, cover plates, extensions,
There are a variety of bases to which aircraft or vehicle loading junction boxes and various rings for
airport lights may be mounted. under normal conditions. the bases.
Usually, the base will not only support L-868 A base subjected to heavy
the light but also houses the isolation aircraft or vehicle loading. The products listed on this sheet
transformer. These bases also are used L-869 Junction box. are common items. Other versions
as underground junction boxes. FAA CLASS are ­available. This page has only a
Class I—Steel Bases ­partial listing.
Class II—Non-Steel Bases
FAA SIZE Note: S ome lights have been designed to work
in load bearing locations with L-867
A—10 inch L-868 only bases. Contact Crouse-Hinds for technical
B—12 inch L-867 or L-868 ­information.
C—15 inch L-868 only
D—16 inch L-867 only

Ordering Information
Catalog Specification Reference Shipping Weight Shipping Volume
Number FAA MIL USAF Description    lb.   kg. cu.ft. cu.m.
Base Plates

AP 1402 . . . . B8954 752 Base plate assembly, flat with cable clamp, 29 13.2 .14 .004
(MS24345 2” (51mm) straight
AP 2932 . . . . . . . . . . . . Side D base plate 16” (406mm) dia. 14 6.3 .15 .004
2” (51mm) N.P.S. tap with gasket
AP 2935 . . . . . . . . . . . . Size D base plate 16” (406mm) dia. 15 6.3 .15 .004
1 1/2” (38mm)-12 tap with gasket
AP 1935 . . . . . . . . . . . . Size B base plate 12” (305mm) dia. 8 3.6 .14 .004
1 1/2” (38mm)-12 tap with neoprene gasket
AP 1932 . . . . . . . . . . . . Size B base plate 12” (305mm) dia. 8 3.6 .14 .004
2” (51mm) N.P.S. tap with neoprene gasket
Blank Cover Plates

AK 1000-X L-867 . . . . . . . . Blank cover plate 13 3/8” (340mm) dia. * .* .13 .004
1/8” (3mm) to 1 1/4” (32mm) thick in 1/8”
(3mm) increments for L-867 Size B
12” (305mm)base
AK 2000-X L-867 . . . . . . . . Blank cover plate 17 3/8” (441mm) dia. * .* .20 .006
1/8” (3mm) to1 1/4” (32mm) thick in
1/8” (3mm) increments for L-867
Size D 16” (406mm) base
AK 3000-12 L-868 . . . . . . . . Blank cover plate for 10” (254mm) 18 8.1 .04 .001
light base 3/4” (19mm) thick
AK 4000-12 L-868 . . . . . . . . Blank cover plate for 12” (305mm) 24 10.9 .06 .002
light base 3/4” (19mm) thick
AK 5000-20 L-868 . . . . . . . . Blank cover plate for 15” (381mm) 38 17.2 .10 .003
light base 1 1/4” (32mm) thick
* Varies by thickness

www.chalp.com
7.2
Catalog Specification Reference Shipping Weight Shipping Volume
Number FAA MIL USAF Description    lb.   kg. cu.ft. cu.m.
Flange Rings

AF 5102-12* L-868 . . . . . . . . Flange Ring with O-Ring gasket and bolts 6 2.7 .04 .001
10” (254mm) dia. x 3/4” (19mm) thick
AF 5402-12* L-868 . . . . . . . . Flange Ring with O-Ring gasket and bolts 7.25 3.3 .06 .002
1/2” (305mm) dia. x 3/4” (19mm) thick
AF 5502-12* L-868 . . . . . . . . Flange Ring with O-Ring gasket and bolts 9 4.1 .10 .003
15” (381mm) dia. x 3/4” (19mm) thick
* Add “Y” for retaining ring
Light Bases

AC 1524 L-868 . . . . . . . . Size A 10” (254mm) x 24” (610mm) 42 19.0 1.22 .034
steel inset light base with plywood cover
AC 2120 L-867 B-8954 Size B 12” (305mm) x 20” (508mm) 40 18.2 1.8 .050
(MS24526-1) steel light base with plywood cover and bolts
AC 2124 L-867 Size B 12” (305mm) x 24” (610mm) 52 23.6 2.6 .070
steel light base with plywood cover and bolts
AC 2320 B-8954 Size B 12” (305mm) x 20” (508mm) 47 21.4 2.2 .060
(MS4526-4 760C steel light base with plywood cover and bolts
AC 2424 L-868 . . . . . . . . Size B 12” (305mm) x 24” (610mm) 63 28.6 2.5 .070
steel inset light base with plywood cover
AC 3524 L-868 . . . . . . . . Size C 15” (381mm) x 24” (610mm) 76 34.5 2.7 .076
steel inset light base with plywood cover
AC 6320 L-867 . . . . . . . . Size D 16” (406mm) x 20” (508mm) 60 27.3 3.6 .100
steel light base with plywood cover and bolts
AC 6324 L-867 . . . . . . . . Size D 16” (406mm) x 24” (610mm) 67 30.3 4.3 .120
steel light base with plywood cover and bolts
20045-4 L-850 inset 12” dia. x 3.5 deep 18 8.1 .07 .020
20452-S234 L-850 tapered inset 12” dia. x 4.5 deep 23 11.3 0.8 .022
Spacer Rings

AR 5121 L-868 . . . . . . . . Spacer Ring for height adjustment * .* .12 .003

for 10” (254mm) Size A base from
1/16” (1.6mm) to 2” (51mm) thick
AR 5421 L-868 . . . . . . . . Spacer Ring for height adjustment * .* .16 .005
for 12” (305mm) Size B base from
1/16” (1.6mm) to 2” (51mm) thick
AR 5521 L-868 . . . . . . . . Spacer Ring for height adjustment * .* .26 .007
for 15” (381mm) Size C base from
1/16” (1.6mm) to 2” (51mm) thick
* Varies by thickness
Stakes

AW 2205 . . . . . . . . . . . . Steel stake 30” (762mm) long 12 5.4 .08 .002

  (4.8mm) with 1 1/2” (3.8mm)-12 tap
AW 2202 . . . . C-5130 . . . . Steel stake 30” (762mm) long 12 5.4 .08 .002
with 2” (51mm) tap
Gaskets

10530287 L-867 . . . . . . . . 12” (305mm) dia. neoprene gasket 0.4 0.2 — —

1/8” (3mm) thick
10530286 . . . . B-8954 757 12” (305mm) Max. dia. polychlorprene 0.5 0.2 — —
(MSL6577) gasket, .135” (3.4mm) thick, ribbed
10530281 . . . . . . . . . . . . 16” (406mm) Nom. dia. neoprene gasket 0.5 0.2 — —
1/8” (3mm) thick
Airport Light Bases

5402
2424 L-868 Flange Ring with 5421 2124
L-868, Class I, Size B O-Ring L-868 Spacer Ring L-867, Class I, Size B
Light Base Light Base

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 7. 3
 SIB-D12
AIRPORT LIGHTING PRODUCTS

Shallow Inset
Light Base - 12˝ Ductile Iron SIB

Applications Ordering Information

The SIB (Shallow Inset Base) is a load-
bearing base designed to mount a 2 0 4 5 3 – –
12” diameter inset fixture (11.25 DBC)
into a taxiway or runway pavement
location.
Fixture Type:
Features
• Ductile Iron Material* Entry Type:
• Tapered sides to resist heaving from the 1 = One Feed-thru Entry (2 Conductors),
pavement 90° (Side B) Standard Entry Location
2 = Two Feed-thru Entry (4 Conductors),
• Open bottom casting cavities which 90° (Side B) Standard Entry Location
fill with the setting epoxy to eliminate F1 = Flexible Rubber Grommets for 1 Inch
torquing in the pavement Conduit, 0° and 180° (Sides A and C)
• Outer retaining ring prevents epoxy Standard Entry Locations
flowing into the base. Easy light H50 = Threaded Hole 1/2-14 NPT, 0° and 180°
fixture removal. (Sides A and C) Standard Entry Locations
• Feed-thru entry version with H75 = Threaded Hole 3/4-14 NPT, 0° and 180°
watertight seals (Sides A and C) Standard Entry Locations
H1 = Threaded Hole 1-111/2 NPT, 0° and 180°
• Secondary plug(s) inside the base (Sides A and C) Standard Entry Locations
for ease of maintenance B2 = Center Bottom Entry Via Flexible Rubber
Grommet for 2 Inch Conduit

Entry Locations:
No Symbol means Standard Locations as noted under “Entry Type”
A =  Side A: 0°
B =  Side B: 90°
C =  Side C: 180°
D =  Side D: 270°

Options:
CR = Corrosion Resistant Coating
GE = Ground Wire, External
GI = Ground Wire, Internal
S312 = Modified for 15 inch Diameter FAA Size C Light

* Recommended for use with Ductile iron fixtures

www.chalp.com
7.4
Dimensional Information

* Typical for 6 bolts equally spaced on 11.25 (286) diameter bolt circle

Bolt and Entry Alignment Diagram

Note: The bolt holes on Sides B & D

are aligned perpendicular to the
runway to taxiway centerline.

Dimensions: inches
(mm)
Shipping Weight: 39.0 lbs.
17.7 kg.

Shipping Volume: 1.0 cu. ft.

.028 cu. m.

Airport Light Bases

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 7. 5
 SIB-A12
AIRPORT LIGHTING PRODUCTS

Shallow Inset Light Base -

12˝ Aluminum
SIB
Applications Ordering Information
The SIB (Shallow Inset Base) is a
load-bearing base designed to 2 1 2 3 8 – – –
mount a 12” diameter inset fixture
(11.25 DBC) into a taxiway or runway
pavement location. Fixture Type:
Features Connection Type:
• Anodized cast aluminum - C-H 1 = One feed-thru (2 conductors)
recommends use with like-metals entry at location “1” in Base side
• Vertical casting recesses prevent 2 = Two feed-thru (4 conductors) entry
rotation in pavement when set into at location “1” & “2” in Base side
epoxy 3 = Bottom entry thru flexible grommet
for 2 inch (2.375 O.D.) pipe
• Horizontal casting flange prevents base
from lifting out of pavement when set Entry Location: (Type 1 & 2 Connection)
into epoxy A = 0° (Parallel to alignment notch)
• Secondary plug(s) inside the base for B = 90° (Perpendicular to alignment notch)
ease of maintenance and light fixture
removal Option:
• Mechanical feed-thru with watertight GE = Ground, External
seal

Accessory
P/N 19583 Installation Fixture

Outline Drawing
3/8-16 UNC-2B .62˝ Ref. 5.88˝ Ref.
Threaded Hole, (15.7 mm) (149 mm)
.50˝ Deep

Dimensions: inches
(mm) Location 1
Instruction Manual: 2408

Shipping Weight: 21238 13.00˝ Dia.

18.0lbs. Centerline (330 mm)
8.2 kg Alignment Ref.

Shipping Volume: 1.0 cu. ft.
0.028 m3 Location 2

Flexible Connection for 2˝

(2.375˝ O.D.) Pipe

www.chalp.com
7.6
SIB-8
Shallow Inset Light Base - 8˝
Aluminum - ICAO SIB

Applications Ordering Information

The SIB is a load-bearing light
base designed in compliance with – –
requirements of FAA Advisory Circular
AC 150/5345-42 and IEC TS 61827 for Fixture Type:
direct mounting of 203mm (8˝) inset 21378
light fixtures. 21388
21390
Features 21431
• Anodized cast aluminum construction
Connection Type: Accessory
• Vertical casting recesses prevent 1 = One feed-thru (2 conductors)
rotation in pavement when set into P/N 87106-1 Installation Fixture
entry at location “A” in Base side
epoxy. 2 = Two feed-thru (4 conductors) entry
• Secondary plug(s) inside the base for at location “A” & “B” in Base side
ease of maintenance and light fixture 3 = Bottom entry thru 3.94 DIA (100mm)
removal in casting center Dimensions: inches
(mm)
• Mechanical feed-thru with watertight 4 = Bottom entry thru 4.57 DIA (116mm)
in casting center, no internal Shipping Weight: 9.0 lbs
seal 4.1 kg

Outline Drawing Option: Shipping Volume: 1.0 cu ft

GE = Ground, External 0.028 m3
“B”
“C” A
Locating Pin
2 Places

“A”

A
Dim. D Threaded Hole Airport Light Bases
2 Places

Basic Catalog Instruction Fixture

Dim. A Dim. B Dim. C Dim. D
Number Manual Reference

21378 2633 8.03 (203.9) 5.91 (150.0) 0.63 (16.0) M10 TCLI/TOL-008

21388 2712 8.03 (203.9) 5.94 (150.9) 0.53 (13.5) M10 RCLI/TDZI

21390 2713 8.03 (203.9) 6.00 (152.5) 0.74 (18.7) M10 TCLI/TOL-008

21431 2730 8.03 (203.9) 5.91 (150.0) 0.63 (16.0) 3/8-16 UNC TOL-008

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 7. 7
 Part Number
AIRPORT LIGHTING PRODUCTS

Index
1003636....................................6.2 33522........................................4.3 82860D07............................... 4.14 850B3CNSR.............................1.2
1003639....................................6.2 40664........................................6.2 82860D10............................... 4.14 850B3CR...................................1.4
100471425............................. 4.34 40818........................................6.6 82860D11............................... 4.16 850B3CR12F............................1.2
100472154............................. 4.34 40938........................................2.2 82860D15............................... 4.16 850B3CR8.................................1.6
10530281..................................7.2 40939........................................2.2 82860F......................................4.2 850B3CRNSR...........................1.2
10530286..................................7.2 40943........................................2.2 82860F1....................................4.4 850B3CX...................................1.4
10530287..................................7.2 40999........................................6.2 82860F2....................................4.6 850B3CX8.................................1.6
18749C................................... 1.42 44481..................................... 3.32 82860W.................................. 4.12 850B3GG8................................1.6
18749R................................... 1.42 44482..................................... 3.32 828SGS.....................................4.8 850B3GX8.................................1.6
19388........................................6.2 44483..................................... 3.32 828SYS.....................................4.1 850B3RX...................................1.4
19583........................................6.2 44484..................................... 3.32 82950D04............................... 4.14 850B3RX8.................................1.6
19999........................................6.2 48310..................................... 3.32 82950D07............................... 4.14 850C2C185G......................... 1.16
200454......................................7.2 48311...................................... 3.32 82950D10............................... 4.14 850C2C185R......................... 1.16
20047........................................6.2 48312..................................... 3.32 82950D11............................... 4.16 850C3CC..................................1.8
20324C................................... 1.42 48313..................................... 3.32 82950D15............................... 4.16 850C3CR..................................1.8
20324R................................... 1.42 50049........................................6.6 82950W.................................. 4.12 850C3CX...................................1.8
20381C................................... 1.42 50184........................................6.6 82960D04............................... 4.14 850C3CY...................................1.8
20381R................................... 1.42 50186........................................6.6 82960D07............................... 4.14 850C3RC..................................1.8
20382C................................... 1.42 50306........................................6.6 82960D10............................... 4.14 850C3RX...................................1.8
20382R................................... 1.42 50359........................................6.2 82960D11............................... 4.16 850C3XC...................................1.8
20452S234................................7.2 50420........................................6.2 82960D15............................... 4.16 850C3XR...................................1.8
20453........................................7.4 602851......................................6.6 82960W.................................. 4.12 850C3XY...................................1.8
20476........................................6.2 602853......................................6.6 84700..................................... 4.24 850C3YC...................................1.8
20510..................................... 1.46 60287........................................6.6 8506AC52.............................. 3.24 850C3YX...................................1.8
20628........................................6.2 606471......................................6.6 8506AC68.............................. 3.24 850D1B185G......................... 1.16
21078..................................... 1.46 606472......................................6.6 8506ACC...................................1.1 850D1B185R......................... 1.16
21162.........................................6.2 606473......................................6.6 8506ACS...................................3.2 850D3GR............................... 1.14
21238........................................7.6 606474......................................6.6 8506ACY...................................1.1 850D3GX............................... 1.14
21378........................................7.7 6068310....................................6.6 8506AG2L.................................3.2 850D3RG............................... 1.14
21388........................................7.7 606834......................................6.6 8506AG2R................................3.2 850D3RX................................ 1.14
21390........................................7.7 606835......................................6.6 8506AG3L.................................3.2 850D3XG............................... 1.14
21431........................................7.7 606836......................................6.6 8506AG3R................................3.2 850E1B.....................................1.2
25057........................................6.2 606837......................................6.6 8506AG52.............................. 3.24 850E1C.....................................1.2
25220........................................6.2 606838......................................6.6 8506AG68.............................. 3.24 850E3G.................................. 1.18
30775..................................... 4.27 606839......................................6.6 8506AGR..................................3.2 850EAB.................................. 3.28
33001........................................4.3 60683E......................................6.6 8506AGS...................................3.2 850F3..................................... 1.22
330012......................................4.3 60915........................................5.9 8506AR2L.................................3.2 852A3GG............................... 1.32
33001GRS................................4.3 610621......................................6.6 8506AR2R.................................3.2 852A3GG12F......................... 1.24
33002........................................4.3 62055........................................5.9 8506AR52.............................. 3.24 852A3GGNSR....................... 1.24
33003........................................4.3 62202........................................6.6 8506ARG..................................3.2 852A3GX................................ 1.32
33004........................................4.3 622451......................................6.6 8506ARS...................................3.2 852A3GX12F......................... 1.24
33004GRS................................4.3 622452......................................6.6 8506AYC...................................1.1 852A3GXNSR........................ 1.24
33005........................................4.3 622453......................................6.6 850A3C.....................................1.4 852A3GY................................ 1.32
33006........................................4.3 622454......................................6.6 850A3C12F...............................1.2 852A3YX................................ 1.32
33006GRS................................4.3 622455......................................6.6 850A3C8...................................1.6 852A3YX12F.......................... 1.24
33007........................................4.3 71043..................................... 3.32 850A3CC...................................1.4 852A3YXNSR........................ 1.24
33008........................................4.3 71044..................................... 3.32 850A3CC12F............................1.2 852A3YY................................ 1.32
33009........................................4.3 801A..........................................3.1 850A3CC8.................................1.6 852AD3GX12F....................... 1.24
33010........................................4.3 801H..........................................3.1 850A3CCNSR...........................1.2 852AD3GX12R...................... 1.24
33011.........................................4.3 801S..........................................3.1 850A3CNSR.............................1.2 852B3GG............................... 1.32
33101........................................4.3 802A..........................................3.1 850A3CR...................................1.4 852B3GG12F......................... 1.24
33102........................................4.3 802H..........................................3.1 850A3CR12F............................1.2 852B3GGNSR....................... 1.24
33103........................................4.3 802S..........................................3.1 850A3CR8.................................1.6 852B3GX................................ 1.32
33125........................................4.3 804E2066............................... 2.12 850A3CRNSR...........................1.2 852B3GX12F......................... 1.24
33150........................................4.3 81431..................................... 5.14 850A3CX...................................1.4 852B3GXNSR........................ 1.24
33151........................................4.3 81432..................................... 5.14 850A3CX8.................................1.6 852B3GY................................ 1.32
33154........................................4.3 81441..................................... 5.14 850A3GG8................................1.6 852B3YX................................ 1.32
33200........................................4.3 81442..................................... 5.14 850A3GX8.................................1.6 852B3YX12F.......................... 1.24
33215........................................4.3 823KP..................................... 4.32 850A3RX...................................1.4 852B3YXNSR........................ 1.24
33226........................................4.3 823KS.................................... 4.33 850A3RX8.................................1.6 852B3YY................................ 1.32
3322812....................................6.4 82850D04............................... 4.14 850B3C.....................................1.4 852C21GG............................. 1.32
332281614................................6.4 82850D07............................... 4.14 850B3C12F...............................1.2 852C21GX............................. 1.32
332286......................................6.4 82850D10............................... 4.14 850B3C8...................................1.6 852C21GY............................. 1.32
332288......................................6.4 82850D11............................... 4.16 850B3CC...................................1.4 852C21RX.............................. 1.32
33266........................................4.3 82850D15............................... 4.16 850B3CC12F............................1.2 852C21XG............................. 1.32
333223......................................4.3 82850W.................................. 4.12 850B3CC8.................................1.6 852C21XR.............................. 1.32
333661......................................4.3 82860D04............................... 4.14 850B3CCNSR...........................1.2 852C21XY.............................. 1.32

www.chalp.com
1
852C21YG............................. 1.32 852D4YX................................ 1.28 852W31XY............................. 1.34 86242T......................................2.4
852C21YX.............................. 1.32 852D4YY................................ 1.28 852W31YG............................ 1.34 8625..........................................2.8
852C21YY.............................. 1.32 852D6..................................... 1.26 852W31YX............................. 1.34 862S..........................................2.1
852C2GG............................... 1.34 852E3008............................... 1.44 852W31YY............................. 1.34 880A2A......................................3.2
852C2GX............................... 1.34 852E312A............................... 1.44 852W3GG.............................. 1.34 880A3A......................................3.2
852C2GY............................... 1.34 852E312B.............................. 1.44 852W3GX............................... 1.34 880A3B.....................................3.2
852C2RX................................ 1.34 852G3R12F........................... 1.38 852W3GY............................... 1.34 880A3B.....................................3.2
852C2XG............................... 1.34 852G3RNSR.......................... 1.38 852W3RX............................... 1.34 884A..........................................4.2
852C2XR................................ 1.34 852G3RX12F......................... 1.38 852W3XG............................... 1.34 98240..................................... 3.12
852C2XY................................ 1.34 852G3RXNSR........................ 1.38 852W3XR............................... 1.34 98250..................................... 3.16
852C2YG............................... 1.34 852G3Y12F............................ 1.38 852W3XY............................... 1.34 AC1524.....................................7.2
852C2YX................................ 1.34 852G3YNSR.......................... 1.38 852W3YG............................... 1.34 AC2120.....................................7.2
852C2YY................................ 1.34 852G3YX12F......................... 1.38 852W3YX............................... 1.34 AC2124.....................................7.2
852C31GG............................. 1.32 852G3YXNSR........................ 1.38 852W3YY............................... 1.34 AC2320.....................................7.2
852C31GX............................. 1.32 852GS3XR................................1.4 858111.......................................5.2 AC2424.....................................7.2
852C31GY............................. 1.32 852GS3YR................................1.4 858113.......................................5.2 AC3524.....................................7.2
852C31RX.............................. 1.32 852GS3YX................................1.4 858113B....................................5.2 AC6320.....................................7.2
852C31XG............................. 1.32 852N31GG............................. 1.34 858115.......................................5.2 AC6324.....................................7.2
852C31XR.............................. 1.32 852N31GX............................. 1.34 858115B....................................5.2 AF510212..................................7.2
852C31XY.............................. 1.32 852N31GY............................. 1.34 858121......................................5.2 AF540212..................................7.2
852C31YG............................. 1.32 852N31RX.............................. 1.34 858123......................................5.2 AF550212..................................7.2
852C31YX.............................. 1.32 852N31XG............................. 1.34 858123B....................................5.2 AK1000X...................................7.2
852C31YY.............................. 1.32 852N31XR.............................. 1.34 858125......................................5.2 AK2000X...................................7.2
852C3GG............................... 1.32 852N31XY.............................. 1.34 858125B....................................5.2 AK300012.................................7.2
852C3GG............................... 1.34 852N31YG............................. 1.34 858211.......................................5.2 AK400012.................................7.2
852C3GG12F......................... 1.24 852N31YX.............................. 1.34 858213......................................5.2 AK500020.................................7.2
852C3GG12R........................ 1.24 852N31YY.............................. 1.34 858213B....................................5.2 AP1402.....................................7.2
852C3GX............................... 1.32 852N3GG............................... 1.34 858215......................................5.2 AP1932.....................................7.2
852C3GX............................... 1.34 852N3GX............................... 1.34 858215B....................................5.2 AP1935.....................................7.2
852C3GX12F......................... 1.24 852N3GY............................... 1.34 858221......................................5.2 AP2932.....................................7.2
852C3GX12R......................... 1.24 852N3RX................................ 1.34 858223......................................5.2 AP2935.....................................7.2
852C3GY............................... 1.32 852N3XG............................... 1.34 858223B....................................5.2 AR5121.....................................7.2
852C3GY............................... 1.34 852N3XR................................ 1.34 858225......................................5.2 AR5421.....................................7.2
852C3RX................................ 1.34 852N3XY................................ 1.34 858225B....................................5.2 AR5521.....................................7.2
852C3XG............................... 1.34 852N3YG............................... 1.34 858311.......................................5.2 AW2202.....................................7.2
852C3XR................................ 1.34 852N3YX................................ 1.34 858313......................................5.2 AW2205.....................................7.2
852C3XY................................ 1.34 852N3YY................................ 1.34 858313B....................................5.2 CAP1M................................... 4.35
852C3YG............................... 1.34 852S3R12F............................ 1.38 858315......................................5.2 CAP3M................................... 4.35
852C3YX................................ 1.32 852S3RNSR.......................... 1.38 858315B....................................5.2 CAP4M................................... 4.35
852C3YX................................ 1.34 852S3RX12F......................... 1.38 858321......................................5.2 CAS1M................................... 4.35
852C3YX12F......................... 1.24 852S3RXNSR........................ 1.38 858323......................................5.2 CAS3M................................... 4.35
852C3YX12R......................... 1.24 852S3Y12F............................ 1.38 858323B....................................5.2 CAS4M................................... 4.35
852C3YY................................ 1.32 852S3YNSR........................... 1.38 858325......................................5.2 DIGITRAC.............................. 4.28
852C3YY................................ 1.34 852S3YX12F.......................... 1.38 858325B....................................5.2 FL949A......................................6.6
852C42GG12F....................... 1.26 852S3YXNSR........................ 1.38 858411.......................................5.2 FL971........................................6.6
852C42GGNSR..................... 1.26 852T3008............................... 1.44 858413......................................5.2 FTS412.....................................3.6
852C42GX12F....................... 1.26 852T312A............................... 1.44 858413B....................................5.2 FTS432.....................................3.6
852C42GXNSR...................... 1.26 852T312B............................... 1.44 858415......................................5.2 FTS81 ......................................3.8
852C42GY12F....................... 1.26 852T4008............................... 1.44 858415B....................................5.2 FTS812.....................................3.6
852C42GYNSR...................... 1.26 852T412A............................... 1.44 858421......................................5.2 FTS83 ......................................3.8
852C42YX12F....................... 1.26 852T412B............................... 1.44 858423......................................5.2 FTS832.....................................3.6
852C42YXNSR...................... 1.26 852W21GG............................ 1.34 858423B....................................5.2 ML4913.....................................6.6
852C42YY12F....................... 1.26 852W21GX............................ 1.34 858425......................................5.2 P1206........................................6.6
852C42YYNSR...................... 1.26 852W21GY............................. 1.34 858425B....................................5.2 P1211........................................6.6
852C4GG............................... 1.28 852W21RX............................. 1.34 858511.......................................5.2 P1215........................................6.6
852C4GX............................... 1.28 852W21XG............................ 1.34 858513......................................5.2 RC1T5A.................................. 4.26
852C4GY............................... 1.28 852W21XR............................. 1.34 858513B....................................5.2 RIU1200................................. 4.26
852C4YX................................ 1.28 852W21XY............................. 1.34 858515......................................5.2 SH6...........................................6.8
852C4YY................................ 1.28 852W21YG............................ 1.34 858515B....................................5.2
852D3GG............................... 1.32 852W21YX............................. 1.34 858521......................................5.2
852D3GX............................... 1.32 852W21YY............................. 1.34 858523......................................5.2 Part Number Index
852D3GY............................... 1.32 852W2GG.............................. 1.34 858523B....................................5.2
852D3YX................................ 1.32 852W2GX............................... 1.34 858525......................................5.2
852D3YY................................ 1.32 852W2GY............................... 1.34 858525B....................................5.2
852D42GG12F....................... 1.26 852W2RX............................... 1.34 858BF..................................... 5.14
852D42GGNSR..................... 1.26 852W2XG............................... 1.34 858F4..................................... 5.15
852D42GX12F....................... 1.26 852W2XR............................... 1.34 8615SGR............................... 2.14
852D42GXNSR...................... 1.26 852W2XY............................... 1.34 8615SGX................................ 2.14
852D42GY12F....................... 1.26 852W2YG............................... 1.34 8615SRR................................ 2.14
852D42GYNSR...................... 1.26 852W2YX............................... 1.34 8615TB066............................. 2.16
852D42YX12F....................... 1.26 852W2YY............................... 1.34 86211E......................................2.6
852D42YXNSR...................... 1.26 852W31GG............................ 1.34 86211T......................................2.6
852D42YY12F....................... 1.26 852W31GX............................ 1.34 86212E......................................2.6
852D42YYNSR...................... 1.26 852W31GY............................. 1.34 86212T......................................2.6
852D4GG............................... 1.28 852W31RX............................. 1.34 86241E......................................2.4
852D4GX............................... 1.28 852W31XG............................ 1.34 86241T......................................2.4
852D4GY............................... 1.28 852W31XR............................. 1.34 86242E......................................2.4

Crouse-Hinds Home Office: United States – 860-683-4300

Revised - 10/08 International Offices: Canada • China • Dubai • Mexico • Shanghai 2