Man Tga Flashcodes For Ecas
Full download: http://manualplace.com/download/man-tga-flashcodes-for-ecas/
TABLE
OF
FLASHCODES
FOR FAULT MEMORIES
SD 206-2.97 e
Page 1 of 62
This is the cut pages sample. Download all 62 page(s) at: ManualPlace.com
Note:
For notes on setting and repair of individual systems please
consult the Repair Manuals or the relevant Service Infor-
mation sheets.
Notes/additions
SD 206-2.97
Page 2 of 62
Index
ABS/ASR
⇒ 2E Bosch.........................................................................Page 4-5
⇒ 3E Bosch.........................................................................Page 6-7
⇒ 2M Bosch ........................................................................Page 8-9
⇒ 2M Stage 1 Bosch ...........................................................Page 10 - 11
⇒ CI 12 Bosch ....................................................................Page 12 - 15
⇒ Knorr ...............................................................................Page 16 - 17
⇒ Wabco "C".......................................................................Page 18 - 21
Running gear:
⇒ ECAS, buses...................................................................Page 22 - 24
⇒ ECAS, trucks...................................................................Page 26 - 27
⇒ EFR running gear control, trucks .....................................Page 28 - 30
Gearboxes:
⇒ Automated pre-selector shift (AVS) .................................Page 40 - 41
⇒ Renk Doromat .................................................................Page 42 - 43
⇒ SAMT B...........................................................................Page 44 - 45
⇒ Voith-Diwa 3....................................................................Page 46 - 47
⇒ Voith retarder ..................................................................Page 48 - 49
⇒ ZF HP 500.......................................................................Page 52 - 54
⇒ ZF retarder (Intarder).......................................................Page 50 - 51
Heating/air-conditioning
⇒ D1LCC/D3LCC, Eberspächer..........................................Page 32 - 33
⇒ Heater controls, Dreiha....................................................Page 34 - 35
⇒ Air-conditioner, Behr........................................................Page 36 - 37
⇒ Heater/air-conditioner control, Wabco (ATC) ...................Page 38 - 39
⇒ Airtop 2000, Webasto......................................................Page 31
Engine:
⇒ EDC M7 ..........................................................................Page 56 - 57
⇒ EDC MS5 ........................................................................Page 58 - 59
⇒ EMS 3.3 ..........................................................................Page 55
⇒ Speed limiter VDO AGB-S ..............................................Page 60 - 61
⇒ Air injection, Wabco ........................................................Page 62
Door control, IFE ..................................................................Page 25
SD 206-2.97
Page 3 of 62
BOSCH ABS/ASR 2E
Reading out the fault memory
− Switch off ignition and connect up request button
− Switch on ignition and press button for more than 1 second
The fault codes are emitted in three blocks. The first block indicates which control unit
status (configuration) is set. In the second and third blocks the faults in the diagonals FL/RR
(second block) and FR/RL (third block) can be read out.
Pause between flashes ............................................................ approx. 0.5 s
Duration of flashes ................................................................... approx. 0.5 s
Pause between individual blocks ............................................. approx. 1.5 s
Example of flashcode: Flashcode 2 in Block 1 for an ABS unit,
flashcode 2 in Block 2 and flashcode 1 in
Block 3.
Lamp in on
request
button
off
Block 1 Block 2 Block 3
Erasing the fault memory
− Switch off ignition and connect up request button
− Press button and keep it pressed
− Switch on ignition and release button after > 3 seconds
SD 206-2.97
Page 4 of 62
Block 1: Flashcode
ABS unit ................................................................................................................2
ABS unit with ASR engine control (not an MAN application)) ................................3
ABS unit with ASR brake control (not an MAN application) ...................................4
ABS unit with ASR brake and engine control....................................................5
Flashcodes 3 and 4 may be emitted if components are not connected up or are defective.
Block 2 (FL/RR) and Block 3 (FR/RL):
Fault type Flashcode
No fault...................................................................................................................1
Control unit defective .............................................................................................2
Speed sensor signal path:
⇒ front: inadmissible gap ......................................................................................3
⇒ rear: inadmissible gap .......................................................................................4
⇒ front: crack or short-circuit .................................................................................6
⇒ rear: crack or short-circuit..................................................................................7
Undervoltage, or relay for pressure control valve cannot be triggered ..................9
Pressure control valve signal path:
⇒ front .................................................................................................................10
⇒ rear ..................................................................................................................11
Relay for pressure control valve cannot switch (sticking)) ...................................13
Signal path for ASR solenoid valve......................................................................14
Connection diagram for request button
Bus X40 X201 X202 X202
X124
SD 206-2.97
Page 5 of 62
Man Tga Flashcodes For Ecas
Full download: http://manualplace.com/download/man-tga-flashcodes-for-ecas/
BOSCH ABS/ASR 3E
Reading out the fault memory
− Switch off ignition and connect up request button
− Switch on ignition
− Press button for > 2 seconds
Blocks 1 and 2 indicate the configuration of the control unit. In Blocks 3 and 4 the faults in
the diagonals FL/CR/RL (Block 3) and FR/CL/RR (Block 4) can be read out.
Example of flashcode: Flashcode 2 in Block 1, Flashcode 2 in Block 2, Flashcode 3 in
Block 3 and Flashcode 1 in Block 4.
Lamp in on
request
button
off
Block 1 Block 2 Block 3 Block 4
Erasing the fault memory
− Switch off ignition and connect up request button
− Press button and keep it pressed
− Switch on ignition and release button after > 3 seconds
Connection diagram for request button
Bus X40 X201 X202 X202
X124
SD 206-2.97
Page 6 of 62
This is the cut pages sample. Download all 62 page(s) at: ManualPlace.com
