Scribd
Upload
33 views1 page

USB Upgrade (E6300) (Eng)

The document provides instructions for upgrading the firmware of a Samsung Blu-ray player using a USB flash drive. It describes downloading the firmware file from Samsung's website, copying it to the root folder of a USB drive, selecting the firmware upgrade option in the player's settings menu, and watching for confirmation messages as the update process completes and the player restarts. It warns that the upgrade process could be interrupted and cause damage if the power is cut during the update.

Uploaded by

darkzidemoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views1 page

USB Upgrade (E6300) (Eng)

The document provides instructions for upgrading the firmware of a Samsung Blu-ray player using a USB flash drive. It describes downloading the firmware file from Samsung's website, copying it to the root folder of a USB drive, selecting the firmware upgrade option in the player's settings menu, and watching for confirmation messages as the update process completes and the player restarts. It warns that the upgrade process could be interrupted and cause damage if the power is cut during the update.

Uploaded by

darkzidemoon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

F/W Upgrade Method by USB flash drive 3. Press [Enter] on the OK to upgrade firmware.

How to prepare F/W Update file via USB flash drive


1. Download the newest firmware file onto your computer from www.samsung.com.
2. If the firmware file is compressed (*.zip), the file should be uncompressed to
B-FIR2UREUC folder.
3. Connect a USB flash drive to your computer.
4. If there are previous versions of B-FIR2UREUC folder on USB flash drive, 4. The upgrade progress bar will be appeared.
delete them.
5. Copy the new B-FIR2UREUC folder to USB flash drive.

Warning
The following events may interrupt the upgrade process and MAY RESULT IN
PERMANENT DAMAGE TO THE UNIT.
1. Unplugging the power cord.
2. Power Outage. 5. When the update is completed, BD Player will be turned off automatically.

How to upgrade the BD Player


1. Insert the USB flash drive into the BD Player while it is ON.
2. Select option in Setting. (Setting / Support / Software Upgrade / By USB)

6. If the power turn on, "HELLO" will appear on the front display.
(TV screen will display the logo.)
7. "UPDATE" will appear on the front display.
8. In some cases, "LD-UP" will appear on the front display.
9. In some cases, "FM-UP" will appear on the front display.
10. The BD Player will be turned off once again.
11. The broadcasting channel will be displayed.
12. Remove the USB flash drive.

You might also like