Scribd
Upload
138 views1 page

Tds Im Ppa20

This document provides information on DAI A INDUSTRY JOINT STOCK COMPANY's processing aid masterbatch product grade IM-PPA20. The product contains PPA additive and resin, and is suitable for cast film, extrusion blow, tube, and injection molding applications. It improves surface finish, reduces die build-up, eliminates melt fracture, and allows for faster production startup and higher output with lower energy consumption. Key properties of the product include a melt temperature of 120-140°C, moisture content of 0.1%, and recommended processing temperature and application rates.

Uploaded by

HD Talababu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views1 page

Tds Im Ppa20

This document provides information on DAI A INDUSTRY JOINT STOCK COMPANY's processing aid masterbatch product grade IM-PPA20. The product contains PPA additive and resin, and is suitable for cast film, extrusion blow, tube, and injection molding applications. It improves surface finish, reduces die build-up, eliminates melt fracture, and allows for faster production startup and higher output with lower energy consumption. Key properties of the product include a melt temperature of 120-140°C, moisture content of 0.1%, and recommended processing temperature and application rates.

Uploaded by

HD Talababu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DAI A INDUSTRY JOINT STOCK COMPANY

Factory’s add.: Luong Son Industrial Zone, Hoa Binh Province, Vietnam
Office: Nam Cuong Building, To Huu Str, Ha Dong Dist., Hanoi, Vietnam
Tel.: +84. 24. 3200 6580 Fax: +84. 24. 3200 6581
E-mail: [email protected] Website: http://daiaplastic.com

TECHNICAL DATA SHEET


PRODUCT NAME: PROCESSING AID MASTERBATCH
PRODUCT GRADE: IM-PPA20

General Description

This product contains: PPA additive and resin. It's suitable for cast film, extrusion blow, tube, injection molding. It
will bring the end-product with more glossy, smooth surface:
• Elimination of melt fracture (shark-skin effect)
• Reduction of die build-up
• Improvement of the surface finish with high gloss levels
• Faster production start-up
• Pressure reduction
• Higher output at constant die pressure and temperature
• Lower energy consumption

Technical Analysis
Physical Property

Items Method of experiment Unit Standard


Carrier Resin DSC PE
Melt Index (190ºC/2.16kg) ASTM D1238 g/10mins 25
Bulk Density ASTM D1895 g/cm3 0.910
o
Melt Temperature DSC C 120-140
Moisture Content ASTM D570 % 0.1

Properties
Additive Processing aid
Processing temperature 170 – 190 (oC)
Pellet Size 3x3 (±0.3) mm
Compatibility PE, PP
Processing Temperature Blow moulding, casting film, blowing film
Application Rate 1 – 5 % of the part’s weight
Packing 20 kg/bag
Storage Keep at dry condition
Shetf-life 18 month

Medical Norm

Attain the Safety Norm for Health and Foodstuff issued by Vietnam Directorate for Standards and Quality
allow the decision 3339/2001/QD-BYT promulgated by Vietnam Ministry of Health. Safety apply for handling process.
No healthy damage infected.

Important note: The above values are for reference only and should not be used for specification. These values are
intended as a general guide and do not represent any warranty or guarantee of particular performance.

You might also like