Scribd
Upload
1K views1 page

Cable Tray Technical Data Sheet

The technical data sheet provides specifications for perforated cable trays manufactured by Bajrang Electrical & Fabricators including standard tray widths of 450, 300, and 150mm, side flange thickness of 50mm, tray thickness of 2.0mm +/- 0.20mm, perforation size of 10x20mm, hot dip galvanized finish with a zinc coating thickness of average 65 microns, and that the trays will be manufactured according to final approved construction drawings.

Uploaded by

Bajrang Electrical Engineering work
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Cable Tray Technical Data Sheet

The technical data sheet provides specifications for perforated cable trays manufactured by Bajrang Electrical & Fabricators including standard tray widths of 450, 300, and 150mm, side flange thickness of 50mm, tray thickness of 2.0mm +/- 0.20mm, perforation size of 10x20mm, hot dip galvanized finish with a zinc coating thickness of average 65 microns, and that the trays will be manufactured according to final approved construction drawings.

Uploaded by

Bajrang Electrical Engineering work
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet for Cable Tray

M/S:- Industrial automation & engineering


Dear Sir/Mam

With Reference to the above we are submitting here with Guranteed Technical Particulars for following sizes of
Cable Tray.
Technical Data sheet for perforated Cable tray
Manufacturer Bajrang Electrical & Fabricators
Supplier Industrial automation & engineering
ReferenceNo.
Project:-
Material HR Sheet as per IS:1079/10748
Tray width 450,300 & 150MM
Side flage (Tray) 50MM
Standard straight length 2500MM
Thickness of tray 2.0MM +-0.20MM (As per IS:1852)
Perforation size 10x20mm
Finish Hot Dip Galvanized as per IS:2629
Zinc coating Thickness Average 65 Micron as per IS:4759
Zinc Deposite 460GSM
Tray specification Purity of zinc 99.9% AS per IS:209
Material HR Sheet as per IS:1079/10748
Size 45x180mm
Thickness 2.0mm+-20mm(As per IS:1852)
Finish Hot Dip Galvanized as per IS:2629
Zinc coating Thickness Average 65 Micron as per IS:4759
Perforated Type cable Zinc Deposite 460GSM
tray Side Coupler Plate Purity of zinc 99.9% AS per IS:209
IS:1079:10748 Hot Rolled Carbon steel
IS:2629 Recommended pratice for Hot dip Galvanized of iron & Steel
IS:2633 Method of testing,Uniformity of coating on zinc articles
IS:6745 Weight of mass of zinc coating
IS:1852 Tolerance for manufacturing
Recommended Standard IS:4759 Thickness of Hot Dip Galvanized Zinc Coating
Note:- Actual manufacturing will be done as per final approved cable tray construction drawing
We are requesting you to provide us the approval for the same at earliest.

Thanking you
You are faithfully
Bajrang electrical & Fabricator

Authorised Signatory

You might also like