Scribd
Upload
443 views1 page

CEAG CG-S 2x3A Module Ordering Info

This document provides information on two central battery system modules: - The SKU CG-S 4 x 1.5 A module can individually monitor up to 20 luminaires across 4 circuits rated at 1.5 A each. It allows programming different lighting modes without additional cabling. - The SKU CG-S 2 x 3 A module operates 1 or 2 circuits at 3 A each, and can program different lighting modes within a single circuit. It has separate fusing for AC and DC power. Both modules are modular units that connect to disconnect terminals and include LED indicators, fuse access, and AC/DC switching capabilities to power emergency lighting fixtures.

Uploaded by

EYplaza- alerts
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
443 views1 page

CEAG CG-S 2x3A Module Ordering Info

This document provides information on two central battery system modules: - The SKU CG-S 4 x 1.5 A module can individually monitor up to 20 luminaires across 4 circuits rated at 1.5 A each. It allows programming different lighting modes without additional cabling. - The SKU CG-S 2 x 3 A module operates 1 or 2 circuits at 3 A each, and can program different lighting modes within a single circuit. It has separate fusing for AC and DC power. Both modules are modular units that connect to disconnect terminals and include LED indicators, fuse access, and AC/DC switching capabilities to power emergency lighting fixtures.

Uploaded by

EYplaza- alerts
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Central battery system ZB-S with STAR technology

Components and options

SKU CG-S 4 x 1,5 A SKU CG-S 4 x 1,5 A


Hybrid operation of maintained light, non-maintained light and switched maintained light per module
can be programmed with no additional data cable.
• Up to 20 luminaires can be monitored individually
• AC/DC switching per module
• Easy access to fuses
• LED indicates fault and Run/ON for each circuit
• Supplies electronic ballast and LED luminaires
• Service-friendly modular units are wired up and ready to connect to 3-tier 4 mm2 disconnect
neutral terminals (optional)
• Gear tray mounting

Fusing 2.5 AT / 6.3 x 32


Continuous current rating 1.5 A per circuit 9
Max. inrush current* 60 A per circuit/240 A per module
Typical switch over time AC/DC approx. 450 ms
Own consumption 7.7 W
* Example: For two circuits => 120 A per circuit
For four circuits => 60 A per circuit

Ordering details
Type Scope of supply Order No.

SKU Circuit change over module SKU CG-S 4 x 1.5 A 40071347840


Spare part Fuse 2.5 AT (6.3 x 32), PU: 10 pcs. 40071070716

SKU CG-S 2 x 3 A SKU CG-S 2 x 3 A


Hybrid operation of maintained light, non-maintained light and switched maintained light in a single
circuit can be programmed with no additional data cable.
• Up to 20 luminaires can be monitored individually
• AC/DC switching per each circuit
• Separate fusing for mains and battery operation
• Easy access to fuses
• LED indicates fault and Run/ON for each circuit
• Supplies electronic ballast and LED-luminaires
• Service-friendly modular units are wired up and ready to connect to 3-tier 4 mm2 disconnect
neutral terminals (optional)
• Gear tray mounting

Fusing 5 AT / 6.3 x 32
Continuous current rating 3 A per circuit
Max. inrush current 250 A per circuit
Typical switch over time AC/DC approx. 450 ms
Own consumption 3.85 W

Ordering details
Type Scope of supply Order No.

SKU Circuit change over module SKU CG-S 2 x 3 A 40071347051


Spare part Fuse 5.0 AT (6.3 x 32), PU: 10 pcs. 40071689047

EATON - EMERGENCY LIGHTING  CPS – Global Catalogue 2018 309

You might also like