Scribd
Upload
16 views1 page

Design

This document provides specifications for refractory lining including thicknesses of insulating materials like Insulite and Plasgun or Hicast Super. It specifies clearances between refractory lining finishes and anchor tips and the provision of masking tape on anchor tips to prevent cracking from thermal expansion. Key dimensions include material thicknesses between 60-140mm, a clearance of 30-40mm, a highest anchor point of around 160mm, and a total refractory lining thickness of 200mm.

Uploaded by

Axel Ricafort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views1 page

Design

This document provides specifications for refractory lining including thicknesses of insulating materials like Insulite and Plasgun or Hicast Super. It specifies clearances between refractory lining finishes and anchor tips and the provision of masking tape on anchor tips to prevent cracking from thermal expansion. Key dimensions include material thicknesses between 60-140mm, a clearance of 30-40mm, a highest anchor point of around 160mm, and a total refractory lining thickness of 200mm.

Uploaded by

Axel Ricafort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

100mm

60mm THK Insulite 60mm THK Insulite


THK
140mm THK Plasgun 140mm THK Hicast Super
Plasgun
≈2m
Provision of Masking Tape on Anchor tips
for prevention of cracking due to thermal
expansion
REFRACTORY LINING FINISH
40mm Clearance From Refractory Lining
Provision of Masking Tape Finish to Highest Point of Anchor
up to on Anchor tips for
HIGHEST POINT OF ANCHOR
prevention of cracking due
to thermal expansion
60° 140 mm THK Plasgun
or Hicast Super
REFRACTORY LINING FINISH
200mm Total Lining
30mm Clearance from Refractory Lining
HIGHEST POINT OF ANCHOR
finish to Highest point of Anchor
≈160mm
100mm THK
Plasgun 60°
≈70mm 60mm THK Insulite

You might also like