COMPUTERORIGINAL

CUSTOMER PTABB.
P.O NUMBER 8400132452 DATED : 26.10.2020.

CONTROL VOLTAGE CLOSE/TRIP 110 VDC.

SPRING DRIVE MOTOR VOLTAGE 110 VDC.

HEATER VOLTAGE 230 VAC.

ABB S.O. NO. 5000079567.

LINE ITEM NO. 10.

QTY. 17 NOs.
D DRAWING LIST
UPDATED.
UPDATED.
C P.O NO.

GENERAL ARRANGEMENT 1HYB907488-0001

APPROVED DRAWINGS.
B REVISED AS PER

SCHEMATIC DIAGRAM 1HYB907965-0003

RATING PLATE 1HYB908003-0009
PRIMARY TERMINAL CONNECTOR 1HYB907965-0020

COVER SHEET FOR

72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
WITH SPRING DRIVE MECHANISM APPS India Limited 1HYB908003-0100
 Mass in Kg. (Approx) 1 CABLE INLET

COMPUTERORIGINAL
Breaker pole operating mechanism SF6 gas Total mass.
435 160 2.5 598 (APPROX) 2 TERMINAL FLANGE
392 TERMINAL LOAD MAX.1250N IN
2495 3 ANY DIRECTION.
196
1050 1050 HOLES FOR EARTH CLAMP
4
230
CLIENT COMMENT.
G REVISED AS PER

DYNAMIC FORCE DURING OPERATION.

5 COMPRESSIVE FORCE : 20kN
TENSILE FORCE : 20kN

15
7 6 POLE BEAM
2

660
7 ARC CHAMBER INSULATOR (PORCELAIN)

15
8 SUPPORT INSULATOR (PORCELAIN)
CLIENT COMMENT.

1920
1895
REVISED AS PER

9 OPEN / CLOSE INDICATOR

660
8 10 DENSITY MONITOR

1045
6

965
SF6 gas 11 OPERATING MECHANISM
filling point B
F

305
C - BREAKER STANDARD : IEC-62271-100.

200
CLIENT COMMENT.
REVISED AS PER

Spring Charging
Handle

B B 45 45
917

9 180° Spring charging ∅14(16x)

40 40 ∅14
handle rotation 180°.
11 M12 SUITABLE
44.5
E

547
D TITLE BLOCK

44.5

44.5
45
UPDATED.

45
40

40
Not in scope 44.5
15.5 15.5
4 PALM ADAPTOR 18 18
PALM ADAPTOR
60

∅15
UPDATED.
C DRAWING

Detail:-2
80

(FOR PRIMARY CONNECTOR - REFER

1700 DRAWING NO. 1HYB907476-0020)
B STR. FEET
UPDATED.

SF6 gas
165 165 filling point

∅18

10
234

SEC-B B Detail C Detail B

GENERAL ARRANGEMENT FOR

72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
WITH SPRING DRIVE MECHANISM FSA1 1HYB907488-0001
SCHEMATIC DIAGRAM FOR
72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
WITH SPRING DRIVE MECHANISM FSA1 1HYB907965-0003
SCHEMATIC DIAGRAM FOR
72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
WITH SPRING DRIVE MECHANISM FSA1 1HYB907965-0003
SCHEMATIC DIAGRAM FOR
72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
WITH SPRING DRIVE MECHANISM FSA1 1HYB907965-0003
 COMPUTERORIGINAL
1 2
MADE in ABB
MADE in ABB
Mec.de operacão tipo FSA1

(29)
Disjuntor tipo EDF SK1-1 Mecanismo de operação tipo FSA1 Massa
Tensão nominal
160 Kg
72.5kV
Número (See note 2.)

Número (See note 1.) Número (See note 1.) Bobinas 110 VDC
Motor 110 VDC
Ordem 5000079567 Ordem 5000079567 Aquecimento 230 VAC 70W

Tensão 72.5 kV Corrente de interrupção 31.5 kA (72)

Nível de isolamento Componente de c.c 44 %
Impulso atmosférico 325 kV Fator do primeiro polo 1.5 - For Item No. 2, 3, 4, 5.
Impulso de manobra - kV Corrente de fecho 79 kA - Engraved (Etched) on natural background.
Tensão suportável à frequência Corr.de curta duração 3s 31.5 kA - Letter height 2mm & Min. line thk. 0.3mm.
industrial 140 kV Interrupção de linhas - Blank text is to be engraved.

128
Frequência 50 Hz em vazio 10 A - Text to be filled with Sun-proof black ink.
Corrente nominal 2500 A Massa total 598 kg - Font Type is Arial.
Pressão do gás SF6 abs (+20°C) Massa do gás 2.5 kg - Langauge Portugese.
Máx pressão de operação 0.9 MPa Normas IEC 62271-100
Enchimento 0.7 MPa Sequência de operação O-0.3s-CO-3min-CO
Alarme 0.62 MPa Classe de temperatura -30°C
Bloqueio 0.6 MPa Ano de fabrico
Volume por polo 18 l

192
- For Item No. 1.
- Engraved (Etched) on natural background.
- Letter height 3.5mm & Min. line thk. 0.3mm.
- Blank text is to be engraved.
- General tolerance as per ISO 2768-c,`89.
Revision Details:

- Text to be filled with Sun-proof black ink.

- Langauge Portugese.
- Font Type is Arial.

3 4 5 NOTE
1. Circuit Breaker serial No. noted in this space.
(See note 1) (See note 1) (See note 1)
2. Operating Mechanism serial No. noted in this space.

A1 B1 C1
29

29

29
10

10

10

TT MB TT

MADE in ABB MADE in ABB MADE in ABB

RATING PLATES
72.5kV SF6 CIRCUIT BREAKER TYPE EDF SK1-1
-
48 48 48 WITH SPRING DRIVE MECHANISM
E

- MOUNTED ON RESPECTIVE POLES. A 20201027 1

APPS Iindia Limited. 1HYB908003-0009 1
 QTY DESCRIPTION SR.NO. MATERIAL
1 PRIMARY TERMINAL PLATE 1 Tin plated Copper Alloy
4 Hex. screw M12 x 70 2 Steel 4.8 IS:1363 (40b)
4 Hex. nut M12 x 0.8d 3 Steel 4 IS 1363 (40b)
8 Plain washer 14/24∅x2.5 4 Steel IS:2016 (40b)
4 Spring washer B12 5 Spring steel IS:3063 (40b)

159,5
15 45 40 44,5 15

17,75

18
44,5
45(8x 17,75

18
E
BL
)
TA
4
I
SU
CHANGE AS PER CUSTOMER

∅1

1
C FASTENERS POSITION

2
2
M1

4
REQUIREMENT

23
5
TITLE BLOCK
UPDATED

3 Bimetallic Strip Detail :

Bi-Metallic strip
Length - 80 mm
Width - 80 mm
Thickness - 1 mm
B

Hole dia - 14 mm
Hole Center - 44.5 X 44.5 mm
Note:
1. All dimensions are in mm.
2. Rated current 2500A Primary terminal *) Material: Tin plated Copper Alloy
3. Short time current withstand capacity 31.5kA for 3 sec. TT MB TT
The Sharp Edges are to be Rounded OFF.
4. GENERAL TOLERANCE
UPTO 50 MM +/- 5% PRIMARY TERMINAL
50 TO 100 MM +/- 4%
ABOVE 100 MM +/- 3% C 20210317
5. Qty : 06 Nos. per CB. B 20210119 EDF 1

ABB Power Proucts

and Systems India Limited. 1HYB907965-0020 1