Operation Manual

www.universal-space.com
 DUO DRIVE

CONTENT

IMPORTANT SAFETY INSTRUCTIONS......................................................... 2

1. SPECIFICATIONS...................................................................................... 4
2. PACKAGE CONTENTS.............................................................................. 5
3. PART NAME..............................................................................................6
4. SET UP & INSTALLATION.........................................................................7
5. HOW TO PLAY........................................................................................ 11
6. GAME OPTION....................................................................................... 11
7. ERROR MESSAGE AND RECOVERY..................................................... 14
8. MAINTENANCE & INSPECTION.............................................................17
9. OVERALL CONSTRUCTION....................................................................18

Non-technical personnel who do not have technical knowledge and

Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries. All repairs must be performed to original
manufacturer specifications.

WARNING: To reduce the risk of fire, electric shock or personal injury,

unplug or disconnect the machine from the power supply before
servicing.

1
06/15/2019
 DUO DRIVE
Thank you for purchasing DUO DRIVE. We hope you enjoy the product.

This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel should
under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may cause
fire, electric shock or personal injury. Unplug the game from the outlet when not in use, when
moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending on
the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.

High Temperature Hazard:

This part may cause scalding.
Do not touch. Surface may be hot.

No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

2
06/15/2019
 DUO DRIVE
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.

This product is an indoor game machine. Do not install outdoors.

Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:

 Places subject to rain/moisture, or places subject to high humidity.

 Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
 Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
 On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
 Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures

IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL RISKS.

Note: The contents of this manual may be updated without notice.

3
06/15/2019
 DUO DRIVE

1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz;
Min. Power consumption: 320W
Max. Power consumption：360W
Dimensions： W43.50×D 58.07×H 78.93 in
Weight： Approximately 485.01 lb
Part No: D120
Model No: C-419

NOTICE: After turning off the game, please wait at least 1 minute before

restarting again.

Note: Game parameters are subject to change without notice.

4
06/15/2019
 DUO DRIVE

2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
 1 x Body Assembly

 Following accessories

NO. Part NO. Code No. Name Spec. Qty Illustration

English
1 D120-801-000 Manual 1
(170401)
Φ5×20mm 1
2 D120-802-000 21901000012 Fuse(220V)
T5A 250VAC
Φ5×20mm
3 D120-803-000 21901000013 Fuse(110V) 1
T5A 125VAC
3×0.75mm
4 D120-804-000 23301050002 Power cable 1
0.5m
5 D120-805-000 25300171001 Key 171 4

6 D120-806-000 25300172001 Key 171B 1

RVQ24YN03
7 D120-807-000 22501000030 Potentiometer 1
25F B502
Inner hexagon M4*20
8 D120-808-000 20101000007 5
screw (black)
Inner hexagon
9 D120-809-000 40607000013 2.5mm 1
spanner
Inner hexagon
10 D120-810-000 40607000014 3mm 1
spanner
Inner hexagon
11 D120-811-000 40607000001 4mm 1
spanner

NOTE: Part models are subject to change without notice.

5
06/15/2019
 DUO DRIVE

3. PART NAME

Marquee Assy.

Monitor Assy.

Speaker

Coin mech.
Control panel Assy.
Seat Assy.

Wooden box Assy.

Ticket dispenser

6
06/15/2019
 DUO DRIVE

4. SET UP & INSTALLATION

This product is an indoor game machine. Do not install outdoors.

 Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
 Place the unit on a dry level surface
 Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.

Leveler

NOTICE
 Be careful not to damage the machine during transport.
 Always unplug the game before moving.
 Keep the machine in upright position during transport.
 For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it touches
the floor, lifting the casters off the ground by 5mm/0.2 in. Repeat the same for all levelers.

Leveler

About 5mm/0.2 in

NOTICE
Make sure the machine is level.

7
06/15/2019
 DUO DRIVE
Before processing with assembly assure you have the following tools.
No. Name Picture

1 Cross screwdriver

Step 1 Connect cables

2. Find the cable from the base at the right corner.

1. Use the key to open the

right ticket door.

5.Installation is finished. 4. Connect the cable. 3.Pull the cable through the
small hole of the main cabinet at
the bottom.

Step 2 Connect the L&R POP board to the main cabinet.

No. Part No. Code No. Name Picture Qty
1 D121-326-000 20101100025 Cross recessed pan head screw 6

Step 3 Connect the seat assembly to the main cabinet.

No. Part No. Code No. Name Picture Qty
2 D121-312-000 20101010011 Hexagon flat round head screws 6

8
06/15/2019
 DUO DRIVE

Step 2
Connect the L&R POP board
to the main cabinet.

Step 3
Connect the seat assembly
to the main cabinet.

4.4 Play Zone

This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 20 in
Play area: 20 in

Service

The machine

Play Area

9
06/15/2019
 DUO DRIVE

4.5 Connecting Power

WARNING: Check the voltage rating before you connect the equipment to
an electrical outlet to ensure that the required voltage and frequency match the
available power source. Please refer the label of the machine.
 Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
 Avoid overloading on one electrical outlet as it could generate heat and fire resulting
from overload.
 Connect the grounding conductor to the earth terminal (GND):

Power socket
Power outlet

Power plug
Power plug
Power cord

WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does
not sit on the power cord as this could damage the cord and become hazardous.

To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.

To prevent electric shock, do not touch the power plug if your hand is wet.

Ensure the power cord is not located where it can be stepped on or tripped over.

10
06/15/2019
 DUO DRIVE

5. HOW TO PLAY

1. Insert coin(s) to start.

2. Select 1 player or 2 players.
3. Use the steering wheel to dodge obstacles and pick up special props.

6. GAME OPTION
6.1 Adjustment button instruction

Open the coin door there is a meter

panel. Press Test button to get into the
setting menu.
Test Service Reset

6.2 Setting menu

6.2.1 Main Menu
Game Mode
Input
Test
Output test
Game reset
Language 语言
Date/Time setting
PC information
Book keeping
Daily Record
Exit & without save
Exit & save
11
06/15/2019
 DUO DRIVE
6.2.2 Game Mode
Free Play OFF
Tickets Out ON
Attract Mode ON
Save Coins ON
Volume 10
Coins Per Game 1
Reward Tickets 10
Mercy Tickets 0
Game time(s) 60
Game Difficulty easy
Score mode star
Ticket mode call Attendant

Back
Note:
No. Item Option Explanation
1 Free Play ON/OFF Play game without credit in.
2 Tickets Out ON/OFF Whether payout tickets after game over.
3 Attract Mode ON/OFF Whether play with sounds during demo
4 Save Tickets ON/OFF Whether save tickets when power is off.
5 Volume 0~10 0 is mute. 10 are max.
6 Coins per Game 1~10 Coins to play one game.
7 Reward Tickets 1~15 Tickets for the winner.
8 Mercy Tickets 0-10 Tickets for the 2nd place.
9 Game time(s) 45-60---80-100 Game play time (seconds).
10 Game Difficult Easy/Normal/Hard Set the difficulty to win.
Select star or ring gold or token stands
11 Score mode Star –Ring-Gold coin
for score display on the screen.
Store tickets in memory/ Whether continue to play the game when
12 Ticket Mode
call attendant ticket is owed.

6.2.2 Input Test 6.2.3 Output Test

Coin 1 NO/OFF Select Button1 light

Coin 2 NO/OFF Select Button2 light
Service button NO/OFF Ticket Drive 1
Reset button NO/OFF Ticket Drive 2
Select Button1 NO/OFF
Select Button2 NO/OFF Back
Wheel POT 1 0~255
Wheel POT2 0~255

12
06/15/2019
 DUO DRIVE
6.2.4 Game reset

Reset Game Setting

Delete A1 Record Note:
Clear Tickets Reset Game setting: Reset all settings to default.
Back Delete All Record: Clear all bookkeeping data,
Clear Ticket: Clear owed tickets.

6.2.5 Select Language

English
中文

6.2.6 Date/Time setting 6.2.7 PC information

Year 2013 CPU

Month 8 Mother board
Day 27 Disk Drive
Hour 15 Memory
Minute 22 Display adapter
Second 22 Display RAM size
Save&back Press Test button to exit
Back

6.2.8 Bookkeeping 6.2.9 Daily Record

Player Coin Tickets Payout Date Weekday RunTime Coins Tickets Payout
1 0 0 0 2013-8-27 SAT 00:10 0 0 0.00
2 0 0 0 Save?
Sum 0 0 0 No
Save? Yes
No
Yes
Reset
Reset Back
Back

6.2.10 Exit & without save

6.2.11 Exit & save

13
06/15/2019
 DUO DRIVE

7. TROUBLE SHOOTINGS
7.1 Common Problem
Please confirm whether every connector connected tightly.
Symptom Possible Cause Recommended action
Frame assembly connector fell or
Game will not Plug in connector tightly.
is loose
start
Frame assembly fault Contact with CEC technical support.
Turn on power SW again. If appeared
Circuit protector make power SW again and again, machine has anomaly.
Power cutting
in cutting state Please contact with CEC technical
support.
Coin mech. fault or sample coin
Change coin mech. or sample coin.
Game will not not installed.
coin up Coin mech. signal cable loose. Check coin mech. signal cable loose.
IO control board no signal. Change IO board.
Volume set too low. Raise the volume.
Connector loose. Plug in connector tightly.
PCB fault. Change PCB.
Speaker fault. Change speaker.
No sound POT installation error. Install POT correctly.
POT fault. Change POT.
Audio cable problem. Reconnect the audio cable or change it.
PC crash. Restart or system recovery.
Driver problem Restart the audio driver.
Out of ticket. Add ticket and press reset button
No ticket Remove the jammed tickets and press
Ticket jamming.
dispensing reset button.
Wrong connection. Check the connections.
Check connectors. Plug in connector tightly
Vitalize another source such as a PC to
Display black Display fault.
verity if the display is operational.
screen
Pull it out and insert it again or change
RAM is loose.
main board or RAM.
PC power cord is loose Check PC power cord whether is loose.
VGA signal cable is loose. Check VGA cable
PC video card is loose. Reseat video card.
Open front cover, if power on, light flash
Display blue PC into protection all the time. Press power button 30s, then
screen restart.
“0X000000A” code appears.
Uninstall or disable the new drivers or
Conflict between computer drive
software.
and software.
PC crash Restart or system recovery

14
06/15/2019
 DUO DRIVE

Symptom Possible Cause Recommended action

Update the driver of the video card or
Display blue screen Software problem.
reinstall the system.
when playing
Hardware problem. Check the hardware one by one.
Playing normal, but Video card is loose or poor
Plug video card again.
appear system contact
halted PC crash Restart or system recovery
Bad connection between the
Reconnect the video card and the
Display abnormal video card and the display
display video cable.
color video cable.
Video card driver problem. Restart the video driver.
For WIN 7, right-click in the blank
space at the desktop
Display can not
---Click “screen resolution”
show the whole Screen resolution problem.
---Click “change the appearance of the
desktop.
display” to adjust the screen
resolution.
---Click “screen resolution”
Bouncing motion of ---Click “change the appearance of the
Screen resolution problem.
the display display” to adjust the screen refresh
rate.
Battery is loose. Reinstall the battery of the main board
No response in
and restart the game or change the
BIOS Main board fault. main board.

Fail to save the

Battery fault. Change the battery of the main board.
BIOS setting

Add silicon on the cooling fin.

Poor heat dissipation Check or change the CPU fan if
PC restart or crash needed.
repeatedly Change the RAM or change the main
RAM or main board fault.
board.
Power source problem. Change the power source.
Fail to install the Download “Driver Genius” or
Driver fault.
driver something similar and try again.
CPU fan off and on. Main board fault. Change the main board.
Slow computer
start-up times after Please let the PC automatically run the
Hard disk problem.
reinstalling the software, or change the hard disk.
system.
Note: After replacing component from pc (except for RAM), and replacing monitor, the game
should be recovered again with the recovery stick attached to the machine.

15
06/15/2019
 DUO DRIVE

If you see following error signs showing on the display, please try the recommended action.
Display Possible Cause Recommended action
Check and reconnect the
The connection part of the
loose ports of the PC or IO
IO board and PC are loose.
board.
Change the cable after
Cable quality problem checking the connection
between IO board and PC.
Check and reconnect the
Cable became loose during
loose cables of the PC or IO
transportation.
board.
Reboot the game after
checking connection and
cable problem, if the problem
IO board is faulty.
remains unresolved, please
call the service department
for assistance.
Out of ticket. Refill ticket
Check and reconnect the
Loose connection of the
loose cables to the ticket
ticket dispenser’s cables.
dispenser.
Ticket dispenser is faulty. Change the ticket dispenser.
Ticket jam. Remove jammed tickets.

16
06/15/2019
 DUO DRIVE

8. MAINTENANCE & INSPECTION

8.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Test game before operation each day.
2. Conduct monthly routine checks of game components ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to maintain proper operation.
8.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and pay
attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the
cautionary matters herein stated can cause personal injury or damage to the machine.

WARNING
• Before servicing the machine, be sure to turn power off. Servicing without turning the
power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent
unnecessary wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire,
electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.
• Should a problem occur, turn off the power immediately and stop operating the machine.
Unplug the power cord of the service outlet. Operating the machine without correcting the
problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible, install the
machine in a well-lit location, and keep the labels clean at all times. Make sure the labels
are not hidden behind other game machines.

17
06/15/2019
 DUO DRIVE

9. OVERALL CONSTRUCTION
9.1 Assembly drawing

18
06/15/2019
 DUO DRIVE

No Part No. Code No. Name SPEC. Qty

1 D120-001-000 29941317B001 Wooden cabinet 748×1203×1739 1
2 D120-002-000 29941317002 PC assembly Assembly 1
3 D120-003-000 29941317B003 Control panel assembly Assembly 1
4 D120-101-000 20641317B001 Console plate δ1 black EVA 1
5 D120-102-000 20541317B003 Console level decal Transparent plastic 1
6 D120-103-000 20541317B002 Display decal Transparent plastic 1
7 D120-004-000 DZPPL-00-01 Coin door assembly Assembly 1
8 D120-005-000 29941317B004 L_Display assembly Assembly 1
9 D120-006-000 29941317B005 R_Display assembly Assembly 1
10 D120-007-000 29941317B008 Indicator light assembly Assembly 1
11 D120-008-000 29941317B009 Marquee assembly Assembly 1
12 D120-009-000 29941317B010 L_Top decal assembly Assembly 1
13 D120-010-000 29941317B011 R_Top decal assembly Assembly 1
14 D120-104-000 20241317B002 Speaker net δ1 black Q235 2
15 D120-105-000 20241317B003 Lower pressure-plate Q235 1
16 D120-011-000 29941317B006 Car seat assembly Assembly 1
17 D120-012-000 29941317B007 Motorcycle seat assembly Assembly 1
18 D120-106-000 20241317007 Both side plate δ1.2 black 2
19 D120-222-000 20241317B053 Back plate δ1.5 black 1
D120-108-000 26000008000 2.5”leveler Q235 4
20 D120-109-000 26000010000 2.5”caster bracket Q235 4
D120-110-001 25501000047 2.5”caster 3-2689-52 4
21 D120-111-000 20241317B030 Car connection plate Q235 1
Motorcycle connection
22 D120-112-000 20241317B039 Q235
plate 1
23 D120-215-000 20241317B001 Marquee back cover plate Q235 1
24 D120-216-000 20241317B046 Plastic bracket δ2 5
25 D120-217-000 20641317B018 Marquee shell δ3 1

19
06/15/2019
 DUO DRIVE

9.2 Indicator light Assembly

NO. Part NO. Code NO. Name Qty Qty

1 D120-218-000 20241317B044 Plastic upper press plate Q235 δ15 1
2 D120-219-000 20241317B045 Indicator light seat bottom plate Q235 δ15 1
3 D120-220-000 20101020037 Indicator light seat ABS δ3 2
4 D120-221-000 20241317B054 Indicator light mounting plate SECCδ1.5 2

20
06/15/2019
 DUO DRIVE

9.3 Control panel Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-114-000 20241317B009 Mounting base δ2 /δ1.5 blue 1
2 D120-115-000 26300000001 Double curved hinge 4” 3
Automotive dynamic
3 D120-013-000 29941317B006 Assembly 1
assembly
Motorcycle dynamic
4 D120-014-000 29941317B007 Assembly 1
assembly
5 D120-116-000 20241317B021 Sleeve Q235 2
6 D120-117-000 20241317B022 Bolt Q235 2
7 D120-118-000 20241317B023 Automotive Shaft block Q235 1
8 D120-119-000 20241317B024 Motorcycle Shaft block Q235 1
9 D120120-000 29940803004 Steering wheel Assembly 1
10 D120-015-000 29941317B014 Motorcycle steering wheel M12 1
11 D120-687-000 20640803007 Steering wheel body ABS 1
12 D120-688-000 20640803009 Steering wheel end cap ABS 1
13 D120-689-000 20640803008 Steering wheel shaft cap ABS 1
14 D120-488-000 20740803010 push button 2

21
06/15/2019
 DUO DRIVE

9.4 Motorcycle steering wheel Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-121-000 20241317B015 Steering wheel base Q235 1
2 D120-201-000 20241518D024A Left handlebar Q235 1
3 D120-123-000 20641317006 Gloves PU 2
4 D120-124-000 20241317031 Washer 202 stainless steel 2
5 D120-125-000 20641317B005 Block column Polyurethane 2
6 D120-126-000 20641317B006 handlebar Washer Black POM 2
Handlebar torsion
7 D120-127-000 20241317B017 65Mn 1
spring
8 D120-128-000 20641317B007 Spring set Black POM 1
9 D120-129-000 20241317B018 Right handlebar Q235 1
10 D120-130-000 20241317B019 Positioning shaft Q235 1
11 D120-131-000 20105000029 A type circlip Q235 1
12 D120-132-000 20241317B020 Pot support SCEE 1
13 D120-133-000 20641317B004 Steering wheel cover ABS 1
14 D120-426-000 22501000033 Pot RB50K 1

22
06/15/2019
 DUO DRIVE

9.5 Automotive dynamic Assembly

23
06/15/2019
 DUO DRIVE

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-134-000 20241317015 Mounting base δ2.5 black Q235 1
2 D120-135-000 20106000175 Deep groove ball bearing 6004-2Z 2
3 D120-136-000 20241317B012 Automobile shaft Black 45# 1
4 D120-137-000 20241317B012 Mounting cover δ2.5 Black Q235 1
Automobile positioning
5 D120-138-000 20241317025 δ3 Black Q235 2
block
Cross recessed pan head
6 D120-305-000 20101000034 M4×10 6
screw suite
7 D120-223-000 20641317B003 Wire plate Black EVA 1
8 D120--224-000 20241317B013 Coupling Φ18 Black Q235 1
9 D120-141-000 20241317019 Pot. mounting plate δ1.5 SCEE 1
RVQ24YN03 25F
10 D120-417-000 22501000030 5K Pot 1
B502
11 D120-143-000 20241317018 Briquetting δ12 Black Q235 1
12 D120-144-000 20106000312 Deep groove ball bearing 628/8-2Z 2
13 D120-145-000 20241317020 Bearing support plate δ2 Black Q235 1
14 D120-146-000 20106000011 Deep groove ball bearing 605ZZ 2
15 D120-147-000 20241317019 Bearing plate δ2 Black Q235 1
16 D120148-000 20241317023 Tension spring Φ2 Black 1
17 D120-149-000 20241317024 Spring block Φ13 Black Q235 1
Cross recessed
18 D120-303-000 20101040018 M4×16 1
countersunk head screw
19 D120-150-000 20113000056 C-level flat washer 5×1.3h 1

24
06/15/2019
 DUO DRIVE

9.6 Motorcycle dynamic Assembly

25
06/15/2019
 DUO DRIVE

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-151-000 20241317015 Mounting base δ2.5 black Q235 1
2 D120-152-000 20106000175 Deep groove ball bearing 6004-2Z 2
3 D120-153-000 20241317B012 Automobile shaft Black 45# 1
4 D120-154-000 20241317B012 Mounting cover δ2.5 Black Q235 1
Motorcycle positioning
5 D120-155-000 20241317027 δ3 Black Q235 2
block
Cross recessed pan head
6 D120-305-000 20101000034 M4×10 6
screw suite
7 D120-223-000 20641317B003 Wire plate Black EVA 1
8 D120--224-000 20241317B013 Coupling Φ18 Black Q235 1
9 D120-156-000 20241317019 Pot. mounting plate δ1.5 SCEE 1
RVQ24YN03 25F
10 D120-417-000 22501000030 5K Pot 1
B502
11 D120-157-000 20241317018 Briquetting δ12 Black Q235 1
12 D120-158-000 20106000312 Deep groove ball bearing 628/8-2Z 2
13 D120-159-000 20241317020 Bearing support plate δ2 Black Q235 1
14 D120-160-000 20106000011 Deep groove ball bearing 605ZZ 2
15 D120-161-000 20241317019 Bearing plate δ2 Black Q235 1
16 D120-162-000 20241317023 Tension spring Φ2 Black 1
17 D120-163-000 20241317024 Spring block Φ13 Black Q235 1
Cross recessed
18 D120-303-000 20101040018 M4×16 1
countersunk head screw
19 D120-164-000 20113000056 C-level flat washer 5×1.3h 1

26
06/15/2019
 DUO DRIVE

9.7 Display Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-409-001 21201032018 32”display LT32BN82 1
2 D120-165-000 20241317032 Monitor mounting plate δ1.5 SECC 2
Cross recessed pan M4×12
3 D120-304-000 20101020035 4
head screw suite Color zinc
4 D120-166-000 20641317011 Display vertical plate 720×15 2
5 D120-167-000 20641317010 Display horizontal plate 420×15 2
6 D120-168-000 20241317042 Display reinforcing plate SECC 2

27
06/15/2019
 DUO DRIVE

9.8 Automotive seat Assembly

28
06/15/2019
 DUO DRIVE

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-170-001 20241317B029A Automobile seat frame δ1.5 blue Q235 1
2 D120-171-000 25900022001 M8×15Adjustable feet M8×15 white 6
3 D120-172-000 20641317B010 Antiskid plate Black 1
4 D120-173-000 20241317B030 Connecting plate Black Q235 1
5 D120-174-000 20241317B031 Left side press plate Black Q235 1
6 D120-175-000 20241317B051 Right side press plate Black Q235 1
7 D120-176-000 20241317B032 Non-slip press plate δ1.5 Black Q235 1
8 D120-177-000 20241317B003 Seat front door Blue Q235 1
9 D120-178-000 20641317B011 Seat cushion δ45 black 1
10 D120-179-000 20641317B012 Seat back cushion δ45 black 1
11 D120-180-000 20241317B034 Tail gas cylinder Aluminum 2
12 D120-181-000 20641317B013 Tail lamp White 2
lamp board mounting
13 D120-182-000 20241317B035 Black Q235 2
seat
14 D120-183-000 20241317B036 Light barrier Aluminum 12
15 D120-184-000 20641317B009 Wheel shell White 4
16 D120-185-000 20241317B037 wheel press plate Q235 blue 1
17 D120-812-000 20711012002 PCB BBGS-A2-PCB(V1.0) 1
18 D120-813-000 22003070008 Mushroom lamp L-040 red 2
19 D120-814-000 29741208001 LED light board TJXS-PGLED 2

29
06/15/2019
 DUO DRIVE

9.9 Motorcycle seat Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-186-000 20241317B038 Motorcycle seat frame δ1.5 blue Q235 1
2 D120-187-000 25900022001 M8×15Adjustable feet M8×15 white 6
3 D120-188-000 20641317B014 Antiskid plate Black 1
4 D120-189-000 20241317B039 Connecting plate Black Q235 1
5 D120-190-000 20241317B031 Left side press plate Black Q235 1
6 D120-191-000 20241317B051 Right side press plate Black Q235 1
7 D120-192-000 20241317B040 Non-slip press plate δ1.5 Black Q235 1
8 D120-193-000 20241317B041 Seat front door Black Q235 1
9 D120-194-000 20641317B015 Seat cushion PU 1
10 D120-195-000 20241317B42 Cushion fixed plate Q235 1
11 D120-196-000 20241317B043 Rear seat Q235 1
12 D120-197-000 20641317B016 Back light white 1
13 D120-198-000 20241317B036 Light barrier Aluminum 12
14 D120-199-000 20641317B009 Wheel shell white 4
15 D120-200-000 20241317B037 wheel press plate Q235 blue 1
16 D120-815-000 29741208001 LED light board TJXS-PGLED 2

30
06/15/2019
 DUO DRIVE

9.10 Coin door Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-315-000 20210911042 Door frame δ2 black Q235 1
2 D120-316-000 20210911047 Coin door δ1.5 black Q235 1
3 D120-317-000 25300171001 171A lock 171A 2
4 D120-418-000 22301000001 Coin mech. Electronic comparison 1
5 D120-319-000 20210911046 Inner coin box δ1.2 black Q235 1
6 D120-320-000 25300172001 171B Lock 171B 1
7 D120-321-000 20210911048 Ticket door δ1.5 black Q235 1
8 D120-322-000 23100000006 Ticket dispenser CL-022Q-386 1
9 D120-323-000 20210911045 Outer coin box δ1.5 black Q235 1
10 D120-324-000 26000018004 Hook δ2(Color zinc) Q235 1

31
06/15/2019
 DUO DRIVE

9.11 Dongle Fixed Assembly

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-325-000 20241317B004 Dongle seat Q235 δ1 1
2 D120-326-000 20241317011 Dongle plate SECCδ1 1
3 D120-327-000 41300000003 U disk 2G 1
4 D120-328-000 20102100010 Hexagon nuts with flange stainless steel M3 2
Cross recessed pan head stainless
5 D120-329-000 20101100025 2
screw steelM4*16

32
06/15/2019
 DUO DRIVE

9.12 Electrical parts1.

1
2 3

4 5 6 4 5 6
9 9

10
10
7
】
11 7

8 8

12

13

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-401-002 22002015017 BG5050B light strip-blue RXBG5050B-BB60Z/M 1
2 D120-402-001 22003080028 5630 light W5630-LC30cm-60z/m 1
3 D120-403-001 22003080031 5630 light W5630-LC5cm-60z/m 1
4 D120-404-000 22003070005 Mushroom lamp L-025 red 2
5 D120-405-000 22003070006 Mushroom lamp L-025 yellow 2
6 D120-406-000 22003070007 Mushroom lamp L-025 green 2
7 D120-407-000 22002016001 Colorful LED Strip Light DC5V RGB IC1606S 2.3
8 D120-408-000 22401000005 Button(Large) White Φ60 2
9 D120-409-001 21201032018 32”LED display LT32BN82 2
10 D120-410-000 22801000017 Speaker 50*120 8 Ω 10 W 2
11 D120-411-000 21602000001 Power supply BTX-3039(110V220V) 1
12 D120-418-000 22301000001 Coin mech. Electronic comparison 2
13 D120-414-000 23100000006 Ticket dispenser CL-022Q-386 2

33
06/15/2019
 DUO DRIVE

Electrical parts2.

6
10
7

8
5

12 12

11

13

17 14 15 16
18 19 20

34
06/15/2019
 DUO DRIVE

NO. Part NO. Code NO. Name SPEC. Qty

1 D120-428-001 21102000051 PC A4 CPU:A4-6300 1
2 D120-412-000 23301000001 Power cord 10A/250V-1.8M 1
15PVGA Video
3 D120-431-000 23307000006 DB15M-DB15M 1
Cable
D120-482-001 22702010032 Fan 4” 110V 1
4
D120-483-000 22702000003 Fan 3” 110V 2
5 D120-429-001 41300000005 U disk 8G 1
Stereo audio
6 D120-437-000 23305000003 1.8M 1
cable
7 D120-432-000 23304000019 Data cable A/B type 60cm 1
8 D120-435-000 23304030001 Extension cable A type 1M 1
9 D120-430-000 23309000130 Sleeve wire Duo Drive 1
M3_MB.PCB
10 D120-438-000 21701000029 Main board 1
150×200×2.0mm
11 D120-433-000 22803000031 2.0 Amplifier GOODCORE-25WD 1
12 D120-436-000 23000000006 Counter C-012 12VDC 18CPS 2
D120-415-000 21709000002 POT connector VR.PCB 1
13 D120-416-000 22403000001 POT knob Black 1
D120-417-000 22501000030 5K POT RVQ24YN03 25F B502 1
14 D120-427-000 22402030002 Green button PB:11C02R (green) 1
15 D120-419-000 22402050001 Black button PB:11C02R( (black) 1
16 D120-420-000 22402010002 Red button PB:11C02R (red) 1
17 D120-421-000 21412000001 Terminal T10A /15A/250V black 1
18 D120-422-000 22601000005 Small ship SW T125/55 1
D120-423-000 21902000006 Fuse base R3-11 110V/250V/10A 1
19
D120-803-000 21901000013 Fuse(110V) Φ5×20mm T10A 250VAC 2
20 D120-425-001 23301000001A Filter YB10A1 10A/250V 1

For 220V
NO. Part NO. Code NO. Name SPEC. Qty
D120-480-001 22702010033 Fan 4” 220V 1
4
D120-481-001 22702010031 Fan 3” 220V 2
Φ5×20mm T5A
19 D120-802-000 21901000012 Fuse(220V) 1
250VAC

35
06/15/2019
 DUO DRIVE

9.13 Decals1.

NO. Part NO. Code NO. Name Spec. Qty

1 D120-701-000 20541317B001 Marquee decal 974×243×5 1
2 D120-702-000 20541317B002 Display decal 1068×920×5 1
3 D120-703-000 20541317B003 Control panel decal 1093×191×3 1
4 D120-704-000 20541317B004 POP L-side decal 437×473×5 1
5 D120-705-000 20541317B005 POP R-side decal 437×473×5 1
6 D120-706-000 20541317B006 Control panel front decal 1088×251×0.3 1
7 D120-707-000 20541317B007 L-side decal 748×990 1
8 D120-708-000 20541317B008 R-side decal 748×990 1
9 D120-709-000 20541317B009 Motorcycle R-side decal 365×291 1
10 D120-710-000 20541317B010 Motorcycle L-side decal 365×291 1
11 D120-711-000 20541317B011 Automotive R-side decal 425×393 1
12 D120-712-000 20541317B012 Automotive L-side decal 425×393 1
13 D120-713-000 20541317B013 Automotive back decal 392×486 1
Motorcycle Steering wheel
14 D120-714-000 20541317B014 65×65 1
cover decal
15 D120-715-000 20541317B015 Motorcycle tire decal 409×247 1
Motorcycle control panel
16 D120-716-000 20541317B016 78×76 1
decal
17 D120-717-000 256000000034 Ticket decal 62×20 2

36
06/15/2019
 DUO DRIVE

Decals2.

13

NO. Part NO. Code NO. Name Spec. Qty

1 D120-718-000 25601000037 High voltage (big) 62×88 2
2 D120-719-000 25600000100 English counter decal B 88X35 1
3 D120-720-000 25600000091 Line mark decal 12X12 1
4 D120-721-000 25601000017 SW decal B 8×18 1
5 D120-722-000 25601000074 Fuse T5A/250V 33X6 1
6 D120-723-000 25601000080 Fuse T5A/125V 33X6 1
7 D120-724-000 25600000071 New voltage 110V 25X6 1
8 D120-725-000 25600000072 New voltage 220V 25X6 1
9 D120-726-000 25601000036 High voltage (small) 41×42 3
10 D120-727-001 20541317B017A CE-certified 220V nameplate 128×68 1
11 D120-728-001 20541317B018A Un-certified220V nameplate 128×68 1
12 D120-729-001 20541317B019A Un-certified110V nameplate 128×68 1
13 D120-730-001 20541317B020 TUV 110V nameplate 135×68 1
37
06/15/2019
 DUO DRIVE

38
06/15/2019
WE ARE HERE TO ASSIST
For parts and service

Have Questions? Contact us!

UNIS SERVICE CENTER

Tel: 972-241-4263
Email: [email protected]