EU Declaration of Conformity

Document number: 2019 / 9C1-3594490-EN-00

Manufacturer or representative: LEDVANCE GmbH
Address: Parkring 29-33
85748 Garching
Germany

Brand name or trade mark: LEDVANCE

Product type: As specified below
Product designation: EMERGENCY CONVERSION BOX
See attached list

The designated product(s) is (are) in conformity with the relevant Union harmonisation legislation:
2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to the making available on
and amendments the market of electrical equipment designed for use within certain voltage limits;
Official Journal of the EU L96, 29/03/2014, p. 357-374)

2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to electromagnetic
and amendments compatibility; Official Journal of the EU L96, 29/03/2014, p. 79-106
2009/125/EC Directive of the European Parliament and of the Council of 21 October 2009
establishing a framework for the setting of ecodesign requirements for energy-
and amendments related products
244/2009 Commission Regulation (EC) implementing Directive 2005/32/EC of the European
Parliament and of the Council with regard to ecodesign requirements for non-
and amendments directional household lamps

245/2009 Commission Regulation (EC) implementing Directive 2005/32/EC of the European

Parliament and of the Council with regard to ecodesign requirements for fluorescent
and amendments lamps without integrated ballast, for high intensity discharge lamps, and for ballasts
and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the
European Parliament and of the Council
1194/2012 Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing
Directive 2009/125/EC of the European Parliament and of the Council with regard to
and amendments ecodesign requirements for directional lamps, light emitting diode lamps and related
equipment

2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic
and amendments equipment; Official Journal of the EU L174, 1/07/2011, p. 88-110

2014/53EU Directive of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on
and amendments the market of radio equipment and repealing Directive 1999/5/EC (applicable from
2016-06-13) Official Journal of the 2015/ C226/ 07

Last two digits of the year in which the CE marking was affixed: 19
Place and date of signatures: 02-Jul-2019

Signatures:
Quality Management Quality Assurance

Names: Scheyer, Yannick Shufen Chen

Customer service contact: LEDVANCE GmbH, Steinerne Furt 62, 86167 Augsburg, Deutschland

This declaration of conformity is issued under the sole responsibility of the manufacturer or representative. It certifies
compliance with the indicated Directives, but implies no warranty of properties.

1/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00
2019 / 9C1-
The conformity of the designated product(s) with the provisions of the European Low Voltage
3594490-EN-00
Directive, 2014/35/EU, is given by the compliance with the following European Standard(s) or other
specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below
applies.
EN 60155: Glow-starters for fluorescent lamps
1995 + A1:1995 + A2:2007
EN 60432-1: Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps
2000 + A1:2005 + A2:2012 for domestic and similar general lighting purposes
EN 60432-2: Incandescent lamps — Safety specifications — Part 2: Tungsten halogen lamps
2000 + A1:2005 + A2:2012 for domestic and similar general lighting purposes
EN 60432-3: Incandescent lamps — Safety specifications — Part 3: Tungsten halogen lamps
2013 (non-vehicle)
EN 60598-1: Luminaires — Part 1: General requirements and tests
2015
EN 60598-2-1: Luminaires — Part 2-1: Particular requirements — Fixed general purpose
1989 luminaires
EN 60598-2-2: Luminaires — Part 2-2: Particular requirements — Recessed luminaires
2012
EN 60598-2-3: Luminaires — Part 2-3: Particular requirements — Luminaires for road and street
2003 + A1:2011 lighting
EN 60598-2-4: Luminaires — Part 2-4: Particular requirements — Portable general purpose
1997 luminaires
EN 60598-2-5: Luminaires — Part 2-5: Particular requirements — Floodlights
2015
EN 60598-2-6: Luminaires — Part 2-6: Particular requirements — Luminaires with built-in
1994 + A1:1997 transformers for filament lamps
EN 60598-2-7: Luminaires — Part 2-7: Particular requirements — Portable luminaires for garden
1989 + A2:1996 + A13:1997 use
EN 60598-2-8: Luminaires — Part 2-8 : Particular requirements — Handlamps
2013
EN 60598-2-10: Luminaires — Part 2-10: Particular requirements — Portable luminaires for
2003 children
EN 60598-2-12: Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted
2013 nightlights
EN 60598-2-13: Luminaires — Part 2-13: Particular requirements — Ground recessed luminaires
2006 + A1 2012
EN 60598-2-20: Luminaires — Part 2-20: Particular requirements — Lighting chains
2015
EN 60598-2-21: Luminaires — Part 2-21: Particular requirements — Rope lights
2015
EN 60598-2-22: Luminaires — Part 2-22: Particular requirements — Luminaires for emergency
2014 lighting
EN 60950-1: 2006 + Information technology equipment – Safety – Part 1: General requirements
A11:2009 + A1:2010 +
A12:2011 + A2:2013
EN 60968: Self-ballasted lamps for general lighting services — Safety requirements
2015
EN 61195: Double-capped fluorescent lamps — Safety specifications
1999 + A1:2013 + A2:2015

2/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00
2019 / 9C1-
The conformity of the designated product(s) with the provisions of the European Low Voltage
3594490-EN-00
Directive, 2014/35/EU, is given by the compliance with the following European Standard(s) or other
specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below
applies.
EN 61199: Single-capped fluorescent lamps — Safety specifications
2011 + A1:2013 + A2:2015
EN 61347-1: Lamp controlgear — Part 1: General and safety requirements
2015
EN 61347-2-1: Lamp controlgear — Part 2-1: Particular requirements for starting devices (other
2001 + A1:2006 + A2:2014 than glow starters)
EN 61347-2-2: Lamp controlgear — Part 2-2: Particular requirements for d. c. or a. c. supplied
2012 electronic step-down convertors for filament lamps
EN 61347-2-3: Lamp controlgear — Part 2-3: Particular requirements for a. c. and/or d. c.
2011 supplied electronic ballasts for fluorescent lamps
EN 61347-2-7: Lamp controlgear — Part 2-7: Particular requirements for battery supplied
2012 electronic controlgear for emergency lighting (self-contained)
EN 61347-2-8: Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent
2001 + A1:2006 lamps
EN 61347-2-9: Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge
2013 lamps (excluding fluorescent lamps)
EN 61347-2-10: Lamp controlgear — Part 2-10: Particular requirements for electronic invertors
2001 + A1:2009 and convertors for high-frequency operation of cold start tubular discharge lamps
(neon tubes)
EN 61347-2-11: Lamp controlgear — Part 2-11: Particular requirements for miscellaneous
2001 electronic circuits used with luminaires
EN 61347-2-12: Lamp controlgear — Part 2-12: Particular requirements for d. c. or a. c. supplied
2005 + A1:2010 electronic ballasts for discharge lamps (excluding fluorescent lamps)
EN 61347-2-13: Lamp controlgear — Part 2-13: Particular requirements for d. c. or a. c. supplied
2014 + A1:2017 electronic controlgear for LED modules

EN 61549: Miscellaneous lamps

2003 + A1:2005 + A2:2010
+ A3:2012
EN 62031: LED modules for general lighting — Safety specifications
2008 + A1:2013 + A2:2015
EN 62034: Automatic test systems for battery powered emergency escape lighting
2012
EN 62035: Discharge lamps (excluding fluorescent lamps) — Safety specifications
2014
EN 62133-2: Secondary cells and batteries containing alkaline or other non-acid electrolytes -
2017 Safety requirements for portable sealed secondary cells, and for batteries made
from them, for use in portable applications - Part 2: Lithium systems
EN 62368-1: 2014 Audio/video, information and communication technology equipment – Part 1:
Safety requirements

3/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00
2019 / 9C1-
The conformity of the designated product(s) with the provisions of the European Low Voltage
3594490-EN-00
Directive, 2014/35/EU is given by the compliance with the following European Standard(s) or other
specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below
applies.
EN 62493: Assessment of lighting equipment related to human exposure to electromagnetic
2015 fields
EN 62532: Fluorescent induction lamps — Safety specifications
2011

EN 62560: Self-ballasted LED-lamps for general lighting services by voltage > 50 V — Safety
2012 + A1:2015 specifications
EN 62838: LEDsi lamps for general lighting services with supply voltages not exceeding 50 V
2016 a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
Consumer goods with a voltage below 50 V are dealt with by the General Product Safety Directive
(GPSD) 2001/95/EC
EN 62471: Photobiological safety of lamps and lamp systems
2008
EN 62733: Programmable components in elctronic lamp controlgear
2015

EN 62776: Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety
2015 specifications

4/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00
2019 / 9C1-
3594490-EN-00
The conformity of the designated product(s) with the provisions of the European EMC Directive,
2014/30/EU is given by the compliance with the following European Standard(s) or other
specifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below
applies.
EN 55015: Limits and methods of measurement of radio disturbance characteristics of
2013 + A1:2015 electrical lighting and similar equipment
EN 61000-3-2: Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic
2014 current emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage
2013 changes, voltage fluctuations and flicker in public low voltage supply systems, for
equipment with rated current ≤ 16 A per phase and not subjected to conditional
connection
EN 61547: Equipment for general lighting purposes — EMC immunity requirements
2009
EN 50498: 2010 Electromagnetic compatibility (EMC) –
Product family standard for aftermarket electronic equipment in vehicles

5/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00
The conformity of the designated product(s) with the provisions of the European eco design
(ERP) Directive is given by the compliance with the following European Standard(s). If not
elsewhere/otherwise indicated the edition/amendment as referenced below applies.

EN 62442-1: Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent

2011 lamps - Method of measurement to determine the total input power of controlgear
circuits and the efficiency of the controlgear
EN 62442-2: Energy performance of lamp controlgear –
2014 Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent
lamps) – Method of measurement to determine the efficiency of the controlgear
EN 62442-3: Energy performance of lamp controlgear –
2014 Part 3: Controlgear for halogen lamps and LED modules – Method of
measurement to determine the efficiency of the controlgear

EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00

The conformity of the designated product(s) with the provisions of the European Directive RoHS is
given by the compliance with the following European Standard(s) or other specifications. If not
elsewhere/otherwise indicated the edition/amendment as referenced below applies.

EN 50581: Technical documentation for the assessment of electrical and electronic products
2012 with respect to the restriction of hazardous substances

6/8
1051b 01/2018
EU Declaration of Conformity
Annex
Document number: 2019 / 9C1-3594490-EN-00

The conformity of the designated product(s) with the provisions of the European radio equipment
Directive is given by the compliance with the following European Standard(s). If not
elsewhere/otherwise indicated the edition/amendment as referenced below applies.
ETSI EN 300 328 V2.1.1: Wideband transmission systems; Data transmission equipment operating in the
2016 2,4 GHz ISM band and using wide band modulation techniques; Harmonised
Standard covering the essential requirements of article 3.2 of Directive
2014/53/EU
Draft ETSI EN 301 489-1 Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
V2.2.0: Part 1: Common technical requirements; Harmonised Standard covering the
2017 essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU
Draft ETSI EN 301 489-17 Electro Magnetic Compatibility (EMC) standard for radio equipment and
V3.2.0: services; Part 17: Specific conditions for Broadband Data Transmission
2017 Systems; Harmonised Standard covering the essential requirements of
article 3.1(b) of Directive 2014/53/EU
EN 62479: 2010 Assessment of the compliance of low-power electronic and electrical equipment
with the basic restrictions related to human exposure to electromagnetic fields (10
MHz to 300 GHz)
EN 50663: 2017 Generic standard for assessment of low power electronic and electrical
equipment related to human exposure restrictions for electromagnetic fields (10
MHz - 300 GHz)

7/8
1051b 01/2018
EU Declaration of Conformity
Attached list
Document number: 2019 / 9C1-3594490-EN-00

AC17118 EM CONV BOX 10.5V 3W LI AT 3H

8/8
1051b 01/2018