3500/05 System Rack
Bently Nevada* Asset Condition Monitoring
Description
The 3500 System rack design holds all 3500 monitor modules and rack power
supplies. It allows the various 3500 modules to communicate with one another
and the power supplies to distribute power to each module as required.
3500 Racks are available in two sizes:
1. Full-size Rack – 19-inch EIA rack with 14 available module slots
2. Mini-Rack – 12-inch rack with 7 available module slots
3500 racks are available in three formats:
1. Panel mount – This rack format is mounts to rectangular cut-outs in
panels, and secures to the panel using clamps supplied with the rack.
Wiring connections and I/O modules are accessible from the rear of the
rack.
2. Rack mount – This rack format is mounts the 3500 rack on 19-inch EIA
rails. Wiring connections and I/O modules are accessible from the rear
of the rack.
3. Bulkhead mount – This rack format mounts the rack against a wall or
panel when it is not possible to access the rear of the rack. Wiring
connections and I/O modules are accessible from the front of the rack.
The 3500/05 Mini-Rack is not available in this format.
The Power Supplies and Rack Interface Module must occupy the far left rack
positions. The remaining 14 rack positions (7 rack positions for the Mini-Rack)
are available for any combination of modules. If you plan to install internal
barriers in the 3500 rack, consult our document part number 141495-01,
Specifications and Ordering Information for 3500 Internal Barriers.
C US
C US
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 1 of 8
Power Supply
Specifications Dip
Hazardous Area Approvals EN 61000-4-11, Criteria B
CSA/C/US Radio
ATEX Frequency
Brazil EN61000-4-6, Criteria A
Refer to the data sheet of
applicable monitor being inserted
into the rack. Ordering Considerations
CE Mark Directives • Racks with Internal Barriers installed require
a 3500/04-01 Internal Barrier Earthing
BN 136669 Module to provide the IS Earth connection to
Bently Nevada Low Voltage the 3500/05 rack. This earthing module
Directive requires a dedicated rack position.
• The 3500/93 System Display A01 System
BN 134036 Face Mount option is incompatible with the
Bently Nevada EMC Directive 3500/05 Mini-rack.
• The 3500/05 Mini-rack is not available in the
EN61000-6-4 Bulkhead mount option.
Radiated • The 3500/06 Weatherproof housing is not
Emissions compatible with the 3500/05 Bulkhead
Mount option.
EN 55011, Class A • When using a 3500 Mini-rack in an EIA rack,
Conducted a 144863-01 19-inch EIA Adapter Panel is
Emissions required.
• The 3500 Mini-rack requires Version 2.70 or
EN 55011, Class A later of the 3500/01 Software.
EN61000-6-2
Electrostatic Ordering Information
Discharge
EN 61000-4-2, Criteria B Rack Ordering Information
3500/05-AXX-BXX-CXX-DXX-EXX
Radiated RFI
A: Rack Size
EN61000-4-3, Criteria A 01 19-inch Rack (14 module slots)
Conducted 02 12-inch Mini-Rack (7 module
Susceptibility slots)
B: Mounting Options
EN61000-4-3, Criteria A 01 Panel Mount Option, Full-Size
Electrical Fast Rack
Transient 02 Rack Mount Option, Full-Size
Rack (mounts to19-inch EIA
EN 61000-4-4, Criteria B Rack)
Surge 03 Bulkhead Mount Option (not
Capability available in Mini-Rack)
04 Panel Mount Option, Mini-Rack
EN 61000-4-5, Criteria B 05 Rack Mount Option, Mini-Rack
Magnetic Field
EN 61000-4-8, Criteria A
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 2 of 8
C: Agency Approval Option Full-height
00 None Blank Monitor
01 CSA - C – US Cover Kit
02 ATEX/CSA
D: Reserved Order as 130768-01 which
00 None includes
E: European Compliance Option 130944-01
00 None
01 CE Full-height Monitor Blank Front
Panel (Qty 1)
Spares
128031-01
Part Number
I/O Module Cover (Qty 1)
Description
04310251
Half-height
Module Adapter Screw for I/O Module Cover (Qty 2)
Order the following Half-height
Blank Monitor
125388-01 Covor Kit
Half-height Module Internal Order the Following
Chassis (Qty 1)
131151-01
125565-01
Half-height Blank Front Panel
Half-height Module Card Guide Cover (Qty 1)
(Qty 1)
Misc
04300111 Components
Screws for Half-height Module
Internal Chassis (Qty 3) 00561941
Power Supply TMR/SIM jumper (installed on the
Blank Cover Kit 3500 backplane)
Order the following 144863-01
131150-01 Adapter Panel, Mini-rack, 19-inch
Power Supply Blank Front Panel 129766-01
(Qty 1)
Rack Installation and
128085-01 Maintenance Manual
Power Supply Input Connector 130432-01
Cover (Qty 1)
Field Wiring Diagrams
04310251
Screw for Power Supply Input
Cover (Qty 2)
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 3 of 8
Figures and Tables
1. 265.94 mm (10.470 in.)
2. 482.60 mm (19.000 in.)
3. 441.96 mm (17.400 in.)
4. 246.38 mm (9.700 in.)
5. 349.25 mm (13.750 in.), 422.91 mm (16.650 inches) if used with internal barriers
3500 Full-Size rack mounting dimensions for the Rack and Panel Mount Configuration
1. 452.1 +/- 1.5 mm (17.80 +/- 0.06 in.)
2. 3.2 mm (0.125 in.) radius, maximum
3. 251.5 +/- 1.5 mm (9.90 +/- 0.60 in.)
3500 Full-Size Rack Recommended Panel Cutout
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 4 of 8
1. 10.470 inches (265.94 mm).
2. 12.000 inches (304.80 mm).
3. 10.400 inches (264.16 mm).
4. 9.700 inches (246.38 mm).
5. 13.750 inches (349.25 mm), 16.650 inches (422.91 mm) if used with
internal barriers
3500 Mini-rack mounting dimensions for the Panel Mount Configuration
1. 274.3 +/- 1.5 mm (10.80 +/- 0.06 in.)
2. 3.2 mm (0.125 in.) radius, maximum.
3. 251.5 +/- 1.5 mm (9.90 +/- 0.60 in)
3500 Mini-rack Recommended Panel Cutout
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 5 of 8
1. 3500 Mini-rack
2. Adapter Panel
3. Standard 19-inch EIA rack
3500 Mini-rack and Adapter Panel mounting to a 19-inch EIA Rack
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 6 of 8
1. 482.60 mm (19.000 inches)
2. 459.59 mm (18.094 inches)
3. 133.35 mm (5.250 inches)
4. 190.50 mm (7.500 inches)
5. 133.35 mm (5.250 inches)
6. 532.64 mm (20.970 inches)
7. 266.70 mm (10.500 inches)
Dimensions of a Bulkhead Mount 3500 rack
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 7 of 8
* Denotes trademarks of Bently Nevada, Inc., a wholly owned subsidiary of General Electric Company.
© 1999 – 2010 Bently Nevada, Inc. All rights reserved.
1631 Bently Parkway South, Minden, Nevada USA 89423
Phone: 775.782.3611 Fax: 775.215.2873
www.ge-energy.com/bently
Specifications and Ordering Information
Part Number 141525-01
Rev. H (01/10)
Page 8 of 8
