TEL-TRU MANUFACTURING COMPANY

MODEL P611 PRESSURE TRANSMITTER

KEY BENEFITS
● Unique glass fused strain gauge sensor never requires re-calibration in the field
● Calibration certificate (NIST traceable) with each transmitter
● Re-rangeable in the field - minimizes customer stocking
● Accuracy +/-0.50%, +/-0.25%, or +/-0.15% of calibrated span
● All 316L stainless steel welded construction for long service life in demanding applications
● RoHS, CE, and NACE compliant

RANGES:
Many ranges from Vacuum to 0-10,000psi;
also metric standard Bar and Kg/cm2
ranges. Custom ranges readily
accomodated.

CONNECTIONS:
Many pressure and electrical connections
available. Custom connections can be
Stepped design of the accomodated.
pressure chamber
minimizes any
effect on the APPLICATIONS:
sensor caused ● Hydraulic and pneumatic controls
by overtight-
Thicker diaphragm ● Hydrogen fuel cells
ening during
installation and high output ● HVAC compressor systems
silicon glass fused ● Pump monitoring
strain gauge
maximize cycle life
● Die cast machines
and protection from ● Plastic injection moulding
pressure spikes ● Test stands
Robust, single ● Presses
piece, 316L
● Oil and gas monitoring
sensor construc- Dry sensor construction
tion without O-rings prevents contamination ● Laboratory testing
or seals provides of customer media
optimum media compatibility

MADE IN USA

w w w. t e l t r u . c o m
MODEL P611 PRESSURE TRANSMITTER - Additional specifications at www.teltru.com/transmit_pres611.asp
FUNCTIONAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
Proof Pressure: PHYSICAL SPECIFICATIONS
Up to 2 times URL * Accuracy:
+/-0.50% or +/-0.25% of calibrated span Wetted Materials:
Burst Pressure: +/-0.15% of calibrated span (4-20mA only) Single piece 316L Stainless Steel diaphragm
Up to 5 times URL or 20,000psi, whichever is less structure, with welded on pressure connections
Linearity:
Strength and Safety: +/-0.15% of calibrated span, BFSL Environmental Rating:
Pressure chamber structure tested to 40,000psi +/-0.05% of calibrated span, BFSL (4-20mA only) Integral Cable, M12 and 1/2" NPT Conduit
Zero Adjustability: connections are warranted as IP67
Hysteresis:
Up to +/- 30% of calibrated span (output Better than 0.05% of calibrated span DIN 43650 A and C connections are warranted as
dependent), externally accessible IP65 or IP67
Repeatability:
Span Adjustability: Better than 0.02% of calibrated span Bendix Style connections are warranted as IP65
Up to 3 to 1 turndown of URL, externally accessible
Zero Offset: Housing including zero/span access plugs meets
Outputs: Within calibrated accuracy (+/-1% of URL for IP65 and IP67
4-20mA, 2-wire 1-5V, 3-wire ** optional sealed version) RoHS Compliant:
0-5V, 3-wire ** 1-6V, 3-wire **
Span Tolerance: All components of this product are certified lead free.
0-10V, 3-wire ** 1-11V, 3-wire **
Within calibrated accuracy (+/-1% of URL for NACE Compliant:
Output Impedance: optional sealed version) Materials fulfill the requirements for H2S Sour Gas
4-20mA: >10K Ohms
Stability: service
0-5V, 0-10V, 1-5V, 1-6V, 1-11V: <100 Ohms
10mV/V: 1100 Ohms Better than +/-0.25% of URL for 1 year,
non-accumulating
Current Consumption:
4-20mA: 20mA Durability:
0-5V, 0-10V, 1-5V, 1-6V, 1-11V: <18mA Greater than 100,000,000 full scale cycles OPTIONS
10mV/V: <5mA @5Vdc excitation Thermal Effect on Zero: ● Certificate of Conformance
Output Load: Less than +/-0.02% URL/°F (+/-0.012% URL/°C) ● Certificate of Calibration traceable to NIST,
4-20mA: 0-1000 Ohms @10-30Vdc Thermal Effect on Span: with 11 points (6 up and 5 down)
1-5V, 0-10V, 1-5V, 1-6V, 1-11V: >10K Ohms Less than +/-0.018% of calibrated span/°F ● Restrictor orifice threaded into the pressure
10mV/V: >1M Ohm (+/-0.032% of calibrated span/°C) connection for hydraulic spike suppression
Output Noise: Shock: ● Silicone gel potting
4-20mA: Negligible Designed to withstand 10Gs, 11ms, 1/2 sine ● Sealed unit without zero and span
1-5V, 0-10V, 1-5V, 1-6V, 1-11V: <2mV RMS (50Gs with optional silicone gel potting) adjustment
10mV/V: Does not apply ● PDT-1 local plug-in loop powered indicator
Vibration:
Power Supply Requirements: Designed to withstand 10Gs peak, 20-2400Hz for use with the DIN 43650 A electrical
10-30Vdc for 4-20mA (50Gs with optional silicone gel potting) connection and 4-20mA output electronics
10-30Vdc for 0-5V, 1-5V, and 1-6V ● Tri-Clover Sanitary and Chemical seals are
14-30Vdc for 0-10V and 1-1V CE Compliant: available
Interference emission per EN 50 081-1 and
Temperature Limits: EN 50 081-2 by design; Interference immunity per
Compensated Range: 30-130°F (0-55°C) EN 50 082-2 by design
Operating range: -40 to 185°F (-40 to 85°C)
Storage range: -40 to 221°F (-40 to 105°C)
* URL = Upper Range Limit (see range code list on ELECTRICAL CONNECTIONS
website, www.teltru.com/transmit_pres611.asp)
** Can be changed in the field

1.56"
1/2" NPT Male 1.44" Mini-DIN
Conduit Conn. 43650 C
Numerous standard
.63"
connections readily
1.50" available
Diam. 1.33"
.84" Diam.
2.17"

PROCESS CONNECTIONS
.75" Diam. .75" Diam. .75" Diam.
.875" Hex
1/4"-18 1/2"-14 7/16"-20
NPT Male NPT Male UNF Male
.78" .78"
.91"
.50" .63" .50"

Tel-Tru Manufacturing Company