O&K

ANTRIEBSTECHNIK
Solutions
PRODUCT RANGE
2 I
O&K ANTRIEBSTECHNIK
Winch drives
FW series
Travel drives
F series
FP series
Other drives
FK series
FTU series
FR series
Jack-Up series
Slew drives
S series
Cutter drives
FA series

The widest range of final drives on the market O&K Antriebstechnik provides
With over 140 years of history, O&K Antriebstechnik is a centre of engineering solutions for:
excellence, recognized worldwide for high quality products for applications in
the mining, construction and marine & offshore industries.
CONSTRUCTION
Acquired by Bonfiglioli Group in 2016, this leading brand develops,
manufactures and offers a full range of final drives such as slew drives, travel
drives, winch drives and cutter drives. MARINE & OFFSHORE
The origins of the company date back to the founders, Benno Orenstein and
Arthur Koppel, who at the end of the 19th century began – in the middle of the
Ruhr – to develop railway systems for foundries and mines. Gradually, O&K MINING
became the benchmark for heavy-duty machines and the best-known brand in
the world for the design and manufacture of excavators and mining shovels.
Today, O&K is recognized for its solid expertise, its capacity to adapt the
design of its products depending on customers’ requirements and the high
technological standards of development.

I 3
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

F Series
Small final drives
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 19 ... 305
Torque (kNm)
F13A 13
FD20 20
Standard features F30 30
• Compact structure Stated torques are peak values for short
• High performance duration.

• 3-7 Planetary wheels per stage

• Notchless ground tooth root
• Different ratios
• Integrated disc-brake

Special executions on request

• Mechanical disconnect device
• Low and high temperature version

4 I
Overall dimensions and technical data
Capacity of Bearing Multi-disk brake
Type Ratio 2 Weight 4 Locking Release Hydraulic motor Plug-in
C-dynamic Co-static torque pressure min. plug in fixed variable
i kN kN kg Nm bar ccm ccm

F13A 93 (41)1-108-122-140-178-229 132 255 50 200 17 28-30-32 28-45

FD20 81-90-101-137-171-228 194/194 325/315 72 300 16 28-30-32 28-45

61 (19)1-66 (32)1-81-90-101- 28-30-32-40-

F30 114-121-137-171-228-305 132/194 255/325 94 300 (255; 400)3 16 (16; 22)3 45-56-60-63 28-45-55-60

D9
D8
D3
D2
D1

D4
D5
D6
D7

L8 L9

R1 L4 L5 L6 R2
L1
L2 L3
L7

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
F13A 10 30 72 13.5 15 16 255 28 79 0.6 0.6 190 230 256 216 220 260 290 M16x2 M16x2 12/8
FD20 10 41 75 15 28 25 300 15.3 86.3 2.5 2.5 240 275 304 250 270 305 335 M16x2 M16x2 18/18
F30 13 25/22 75 15 29 25 323/320 28.5 89 2.5 2.5 240 275 304 269 270 305 335 M16x2 M16x2 18/18

1) 2-stage 2) Other ratios on demand 3) Optional brake torques 4) Without Hydraulic motor

I 5
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

F Series
Medium final drives
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 14 ... 409
Torque (kNm)
F40 40
F40A 40
Standard features F55 55
• Compact structure F55A 55
• High performance F55B 55
F80 80
• 3-7 Planetary wheels per stage
F80XR 80
• Notchless ground tooth root F100 100
• Different ratios F100XR 100
• Integrated disc-brake
Stated torques are peak values for short
duration.

Special executions on request

• Mechanical disconnect device
• Low and high temperature version

6 I
Overall dimensions and technical data
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 2 Weight 4 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm

F40 61 (19)1-66 (22)1- 224 405 115 420 18 40-45-56-60-63 55-60

81 (32)1-85-101-110-
117-124-142-181-222-
F40A 266-409 224 405 123 420 18 80-90 80

F55 224 405 165 420 (390; 500)3 15 (15; 21)3 80-90 80
63 (16)1-68 (19)1-
87 (22)1-94 (32)1-103-
F55A 117-124-137-148- 224 405 177 420 (390; 500)3 15 (15; 21)3 40-45-56-60-63 55-60
185
F55B 224 405 181 420 (390; 500) 3
15 (15; 21) 3
- 107-110

F80 61 (19)1-81 (32)1-101- 300 570 230 600 (375; 550; 1000)3 18 (18; 19; 28)3 80-90-107-110-125-160-180
114-121-137-147- 80-107-110-160
F80XR 171-187-206-228 300 570 240 600 18 80-90-107-110-160-180

F100 14-26-77 (21)1-84 (22)1- 498 1,010 330 600 (900)3 15 (13)3
95 (32)1-121-142- 107-125-160-180 107-110-160
F100XR 175-192-226 498 1,010 341 600 15
D9
D8
D3
D2
D1

D4
D5
D6
D7

L8 L9

R1 L4 L5 L6 R2
L1
L2 L3
L7

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
F40 16 16 91 21 34 26 338 38 100 2.5 2.5 240 285 320 294 295 335 370 M20x1.5 M20x1.5 20/20
F40A 13 35 91 21 34 26 357 38 100 2.5 2.5 270 310 345 294 295 335 370 M20x1.5 M20x1.5 16/20
F55 12 25 110 24 36 30 413 64 113 1 2.5 280 325 360 340 350 400 435 M20x1.5 M20x1.5 24/20
F55A 20 30 91 24 36 30 399 45 113 4 2.5 240 285 320 340 350 40 435 M20x1.5 M20x1.5 20/20
F55B 12 37 110 24 36 30 425 64 113 1 2.5 290 335 370 340 350 400 435 M20x1.5 M20x1.5 20/20
F80 20 35 90 22 37 24 415 34 123 4 2.5 330 370 410 374 400 450 490 M24x2 M24x2 20/20
F80XR 20 35 90 22 37 23 414.5 68.5 123 4 2.5 330 370 410 374 400 450 490 M20x1.5 M20x1.5 20/20
F100 35/37 35/37 165 28 53 43 461/463 32 139 10 (12)/60 5 390 460 500 407 408 460 500 M24x2 M24x2 30/24
F100XR 22 35 148 29 53 30 463 32 139 2.5 2.5 380 430 480 407 430 480 500 M24x3 M24x3 20/20

1) 2-stage 2) Other ratios on demand 3) Optional brake torques 4) Without Hydraulic motor

I 7
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

F Series
Large final drives
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 14 ... 1784
Torque (kNm)
F130 130
F130XR 130
Standard features F180 180
• Compact structure F180XR 180
• High performance F220 220
F220XBR 220
• 3-7 Planetary wheels per stage
F260 260
• Notchless ground tooth root F280 280
• Different ratios F340 340
• Integrated disc-brake F360 360
• Different hydraulic motors F420 420
F440 440
F560 560
Special executions on request Stated torques are peak values for short
• Mechanical disconnect device duration.

• Low and high temperature version

8 I
Overall dimensions and technical data | F130 ... F180XR
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 2 Version 4 Weight 5 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm
16-22-43-55-69 (14)1-
F130 81 (18)1-85 (21)1-95 ST 523 980 452 750 19
(26)1-115-123-141-
159-167-180-206 107-125-160-180 107-160
81-85-115-159-167-
F130XR ST - - 465 750 19
180-206

ST 787 1,650 636 1375 (800)3 35 (35)3 160-180 160

F180
23-206-221-255-281- CC 787 1,650 636 1375 (800) 3
35 (35) 3
180 -
(412)6-(618)6-(824)6
F180XR ST 787 1,650 636 1375 (800)3 35 (35)3 160-180 -

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9

F130 ST 45 45 190 35 58 45 530 50.5 147 – – – 25 4 390 500 550 449 450 500 550 M24x2 M24x2 32/32

F130XR ST 20 70 165 35 58 45 532 25 147 – – – 1.2 1.2 420 460 500 449 460 500 540 M24x3 M18x1.5 24/36

ST 30 30 168 40 56 21.5 534.5 50.3 141.4 – – – 4 3 450 510 560 528 535 600 650 M24x2 M27x2 30/30
F180
CC 25 30 171 80 - 86 564.5 80.3 141.4 – 35 81.5 4 5 340 400 444 – 445 495 528 M33x1.5 M27x2 24/30

F180XR ST 30 30 168 40 56 21.5 534.5 50.3 141.4 – – – 4 3 450 510 560 528 535 600 650 M24x2 M24x2 30/30

1) 2-stage on demand 3) Optional brake torques 5) Without hydraulic motor

2) Other ratios on demand 4) ST= Standard CC= Crawler Crane 6) In combination with input bevel drive

I 9
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES
Overall dimensions and technical data | F220 ... F280
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 2 Version 4 Weight 5 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm
69-97 (298)6-119 (372)6- ST 765 1,660 740 1,200 15 107-180 160-200-215-250-280
F220 120 (572)6-190 (744)6-
248 (805)6-290-344-345 CC 750 1,560 895 1,000 15 107-180 160

97-119-190-248-
F220XBR ST - - 800 1,200 15 107-180 160-200-215-250-280
290-345

69-97-147-168-245- ST 750 1,560 865 1,000 15 - 355-250

F260 251-344-345-(670)6-
(1115)6-(1784)6 CC 750 1,560 895 1,000 15 - 160

F280 19-201 ST 1,180 2,600 1,037 1,650 15 - 250

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
ST 18 52 166.5 40 61 35 580.5 16 187.5 – – – 35°/16/16 4 460 600 650 540 542 600 650 M24x2 M24x2 38/38
F220
CC 21 25 165.5 54 – 106.5 631.5 42 189.5 – 54 75 – 4 428 474 521 – 523 570 608 M30x2 M24x1.5 30/36

F220XBR ST 52 52 170 40 40 50 580.5 16 187.5 – – – 2.5 – 460 600 650 538 610 680 735 M30x3.5 M30x3.5 30/24

ST 21 45 170 40 48 60 579 18.5 189.5 – – – 2 – 460 520 570 608 610 680 735 M30x2 33 24/24
F260
CC 21 25 165.5 54 – 106.5 631.5 42 189.5 – 54 75 – 4 428 474 521 – 523 570 608 M30x2 M24x1.5 30/36

F280 ST 52 125 125 40 65 45 627 89.3 180.4 – – – 18°/50/5 4 530 630 685 608 610 685 740 M30x3.5 M30x3.5 28/28

1) 2-stage on demand 3) Optional brake torques 5) Without hydraulic motor

2) Other ratios on demand 4) ST= Standard CC= Crawler Crane 6) In combination with input bevel drive

10 I
Overall dimensions and technical data | F340 ... F560
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 2 Version 4 Weight 5 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm

F340 257 ST 1,040 2,450 976 1,700 12 - -

25-94 (385)6-128 (446)6-161

F360 (670)6-168 (848)6-186 (1115)6-223 ST 1,040 2,450 1,080 1,700 12 355 355
(1784)6-242-257-283-339-343-490

F420 259 ST 1,120 2,555 1,500 1,000 18 - (2x) 160

310-352-414-555-637-(445)6-
F440 CC 1,040 2,450 1,300 1700 (1000)* 15 (7.8)* - 250-160
(528)6-(705)6

F560 250-357-388-739-(887)6 CC 1,040 2,450 2,000 900 13 - 160

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
F340 100 100 130 40 60 80 697,5 75 214,8 - - - 18°/100/16 10 580 680 735 649,5 650 720 775 M30x3,5 M30x3,5 30/30
F360 100 100 130 40 60 80 658 25 215 - - - 18°/100/16 10 580 680 735 649 650 720 775 M30x3.5 M30x3.5 30/30
F420 60 132 130 40 60 80 1026 43.5 210.7 - - - 10 10 660 744 795 670 674 744 795 M30x2 M30x2 42/42
F440 40 43 255 40 25 25 820 80 213 - 40 70 4 4 450 515 569 669 570 620 670 M36x3 M30x3 30/30
F560 40 43 255 45 45 120 831.5 80 213 - 45 70 4 4 450 515 569 763 570 620 670 M36x1.5 M30x1.5 29/42

* Park brake integrated in hydraulic motor 3) Optional brake torques 6) In combination with input bevel drive
1) 2-stage on demand 4) ST= Standard CC= Crawler Crane
2) Other ratios on demand 5) Without hydraulic motor

I 11
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

F Series
XLarge final drives
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 23 ... 989
Torque (kNm)
F620 620
F650 650
Standard features F700 700
• Compact structure F700A 700
• High performance F750 750
F800 800
• 3-7 Planetary wheels per stage
F1100 1,100
• Notchless ground tooth root F1300 1,300
• Different ratios F1800 1,800
• Integrated disc-brake F2000 2,000
• Suitable for various hydraulic motors F2200 2,200
F3000 2,916

Special executions on request Stated torques are peak values for short
duration.

• Mechanical disconnect device

• Low and high temperature version

12 I
Overall dimensions and technical data | F620 ... F700A
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 1 Version 2 Weight 3 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm

30-249-293-328- ST 1,320 3,150 2,897 1,200 28 (2x) 250-(1x) 500 (2x) 250-(2x) 280-(1x) 500
F620 462 CC 1,320 3,150 2,897 1,200 28 (2x) 200-(2x) 160 (2x) 160

F650 380-682 CC 1,040 2,450 1,660 1,150 17 - (2x) 215

F700 377 CC 1,320 3,150 3,350 1,200 28 (2x) 250 (2x) 250-(2x) 280

F700A 648 CC 1,320 3,150 3,350 1,200 28 - (2x) 160

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
ST 50 57.5 245 52.5 53 75 1232 38 287 341 – – 4 – 730 810 880 880 885 965 1020 M30x2 M30x2 41/48
F620
CC 30 33 405 96 – 306 1159 99 287 352.8 50 65 4 5 668 726 779 – 782 830 880 M36x1.5 M30x1.5 30/45

F650 CC 40 43 255 89 – 117 846.5 133 213 – 45 70 4 4 450 515 563 – 570 620 763 M36x1.5 M30x1.5 29/42

F700 CC 30 33 405 96 – 306 1283.5 99 287 352.8 50 65 4 5 668 726 779 – 780 850 900 M36x1.5 M36x1.5 30/45

F700A CC 30 33 405 96 – 306 1372.5 99 287 474.8 50 65 4 5 668 726 779 – 780 850 900 M36x1.5 M36x1.5 30/45

*Park brake integrated in hydraulic motor 2) ST= Standard CC= Crawler Crane
1) Other ratios on demand 3) Without hydraulic motor

I 13
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES
Overall dimensions and technical data | F750 ... F1800
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 1 Version 2 Weight 3 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm

F750 377 CC 2,800 6,390 3,450 1,200 28 (2x) 250 (2x) 250

F800 23-283-298 ST 2,485 5,941 3,764 1,000* 7.8* (2x) 250 (2x) 250-(2x) 280

F1100 406 ST 3,900 7,650 7,220 1,750 20 (2x) 250 (2x) 250-(2x) 280

F1300 461 ST 3,900 7,650 7,400 1,750 20 (2x) 250 -

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9

F750 CC 30 33 405 96 - 306 1318 129 258,5 353 50 68 4 5 668 726 779 - 780 850 900 M36x1,5 M36x1,5 30/45

F800 ST 20 25 229 60 58 170 1315 161/163 257/253 713 – – 6 8 830 980 1050 916 920 976 1055 M30x2 M30x2 48/48

F1100 ST 57 60 503 74 – – 1483 176 368 713 – – 10 6 1110 1230 1310 1116 - 1170 1226 M36x4 M30x3.5 48/52

F1300 ST 57 60 503 74 – – 1623 176 368 395.5 – – 10 6 1110 1230 1310 1116 1100 1170 1226 M36x4 M30x3.5 48/52

* Park brake integrated in hydraulic motor 2) ST= Standard CC= Crawler Crane
1) Other ratios on demand 3) Without hydraulic motor

14 I
Overall dimensions and technical data | F1800 ... F3000
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio 1 Version 2 Weight 3 Locking Release Plug-in Plug-in
C-dynamic Co-static torque pressure min. fixed variable
i kN kN kg Nm bar ccm ccm
ST 3,900 7,650 7,500 1,200 28 - (2x) 250-(2x) 280
F1800 656-744
CC 3,900 7,650 9,000 1,200 28 (2x) 250 (2x) 250-(2x) 280
ST 5,100 11,600 10,700 2,300 22 - (2x) 250 - (2x) 355
F2000 516 - 989
CC 3,900 7,650 9,000 1,200 28 - (2x) 355
ST 5,100 11,600 10,736 2,300 22 (2x) 355 (2x) 355
F2200 552-989
CC 3,900 7,650 9,000 1,200 28 (2x) 250 (2x) 250-(2x) 280

F3000 699 ST 6,110 11,900 11,500 1,700 12 - (2x) 250-(2x) 280

L12
D9
D8

L11
D8

D9
D1
D3
D2

D5

D7

D7
D1
D6
D4

D3
D2
D6

L8 L9 L8 L9
D5

L1 L4 R2
R1 R1
L4 L5 R2 L1 L6
L2 L6 L2
L10 L3 L10 L3
L7 L7

Standard input version - ST Crawler crane version - CC

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9
ST 54 60 310 74 107 191.5 1839.5 176 368 615.5 – – 10 10 1110 1230 1310 1224 1250 1350 1430 M36x1.5 M42x2 48/40
F1800
CC 55 60 478 158 – 239 1785.5 171 375 602.5 50 90 4 6 785 851 923 – 935 1016 1224 M42x2 M42x2 40/40
ST 70 70 343 80 100 80 1846 217 376 591 - - 10 10 1288 1400 1500 1224 1230 1320 1400 M42x3 M42x3 50/48
F2000
CC 60 60 478 159 - 239 1956,5 171 375 626 - - 4 6 785 858 930 1224 935 1016 1224 M48x2 M48x2 36/36
ST 60 70 343 80 100 80 1846 217 376 591 - - 10 10 1288 1400 1500 1224 1230 1320 1400 M42x3 M42x3 50/48
F2200
CC 55 60 478 158 - 239 1956,5 171 375 626 55 93 4 6 785 858 930 - 935 1016 1224 M48x2 M48x2 36/36

F3000 ST 60 70 343 80 100 80 2000 217 376 606 - - 10 10 1288 1400 1500 1224 1230 1320 1400 M42x3 M42x3 50/48

* Park brake integrated in hydraulic motor 2) ST= Standard CC= Crawler Crane
1) Other ratios on demand 3) Without hydraulic motor

I 15
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

FP Series
Final drives angular input
The FP Series are perfectly suitable with any crawler, large
excavators and crushers. Thanks to compact, rugged design,
high torque and load capabilities, these solutions are the best
possible option for the machine. All units are available with a
fail-safe parking brake. Different disengagement systems are
available on demand for all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 248 ... 825
Torque (kNm)
FP100 100
FP130 130
Standard features FP180 180
• Compact structure FP220 220
• High performance FP360 360
FP440 440
• 3-7 Planetary wheels per stage
FP560 560
• Notchless ground tooth root FP900 900
• Different ratios FP1100 1,100
• Integrated disc-brake
Stated torques are peak values for short
duration.

Special executions on request

• Mechanical disconnect device
• Low and high temperature version

16 I
Overall dimensions and technical data
Capacity of Bearing Park Brake Optional
Type Ratio 1 Version 2 Weight Release
C-dynamic Co-static Locking torque 3
pressure min.
i kN kN kg Nm bar
FP100 426 ST 498 1,010 410 600 15
FP130 825 ST 523 980 452 750 19
FP180 412 ST 787 1,650 757 1,375 35
FP220 248 ST 765 1,660 915 1,200 15
FP360 446 ST 1,040 2,450 1,065 1,700 12
FP440 528 CC 1,040 2,450 1,300 1,700 15
FP560 450 CC 1,040 2,450 2,222 900 13
FP900 406 CC 2,800 6,390 3,750 - -
FP1100 1,088 ST 3,900 7,650 7,684 - -

L12
D8

D9

D8 L11

D9
D5
D6
D3
D2
D1
D3
D2
D1

D7
D4
D5
D6

D7
L8 L9 L8
L9

R1 L4 R2
L4
L1 L6
R1 L1 L5 L6 R2 L2
L13 L2 L3 L13 L3
L14 L7 L14 L7
L15 L15

Standard input version - ST Crawler crane version - CC

Type Qty.
L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 L134 L144 L154 L164 L174 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9 D10
4
D10 Key4

FP100 35 65 165 28 53 43 463 32 139 – – – 115 215 678 60 215 12/60 5 390 460 500 407 408 460 500 M24x2 M24x2 30/24 40
DIN6885
(A12x8x50)
FP130 45 45 190 35 58 45 530 50.5 147 – – – 311 411 941 60 215 25 4 390 500 550 449 450 500 550 M24x2 M24x2 32/32 40
DIN6885
FP180 30 30 168 40 56 21.5 534.5 50.3 141.4 – – – 437.5 542.5 1077 75 265 4 3 450 510 560 528 535 600 650 M24x2 M27x2 20/30 50 (A14x9x70)
DIN6885
FP220 18 52 166.5 40 61 35 580.5 16 187.5 – – – 448 593 1173.5 85 300 35°/16/16 4 460 600 650 540 542 600 650 M24x2 M24x2 38/38 55 (A16x10x80)
DIN6885
FP360 100 100 130 40 60 60 657.5 25 215 – – – 380 545 1202.5 110 387 18°/100/16 10 580 680 735 649.5 650 720 775 M30x3.5 M30x3.5 30/30 60 (A18x11x100)
DIN6885
FP440 40 43 255 40 – 120 814 80 213 – 40 70 255 400 1214 85 300 4 4 450 515 569 – 570 620 670 M36x1.5 M30x2 29/42 55 (A16x10x80)

FP560 40 43 255 45 – 120 831.5 80 213 – 45 70 857 1104 1935.5 160 570 4 4 450 515 569 – 570 620 763 M36x1.5 M30x1.5 29/42 90
DIN6885
(A25x14x150)
FP900 30 33 405 96 – 306 965 129 258.5 – 50 68 612 859 1824 120 540 4 5 668 726 779 – 780 850 900 M36x1.5 M36x1.5 30/45 75
DIN6885
FP1100 54 60 503 74 – 326 1429 179 368 – – – – – – – – 4 5 1110 1230 1310 1116 1100 1170 1226 M36 M30 48/52 60 (A18x11x100)

1) Other ratios on demand 3) Optional brake torques

2) ST= Standard CC= Crawler Crane 4) Other dimensions optional

I 17
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

Planetary gearbox with

integrated kit motor
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Gear ratios
• 45.2
Torque (kNm)
F30K under development
F45K 45
Features F55K under development
• Integrated hydraulic motor F80K under development
• 2 – Stage planetary drive F100K under development

• 2 – Speed hydraulic motor

• Counterbalance travel valve
• High pressure relief valves
• 2 – Speed shift function by external pilot control
• Automatically release park brake

18 I
Overall dimensions and technical data
Capacity of Bearing Park Brake Hydraulic Motor
Type Ratio Weight Locking Automatic Variable Max. Max. Pilot
C-dynamic Co-static torque release displacement pressure pump flow pressure
i kN kN kg Nm ccm bar L/min bar
F45K 45.2 215 291 296 400 - 175 max / 99 min 350 240 10-40

L10
DRAIN PORT DR2 L7
SIZE 1/2" BSP
L2 L3 L6
HIGH PRESSURE PORT B L1 L4 L5
D9

SIZE 1" BSP

D10

D4
D6
D7
D3
D2
D1

D5
D8

HIGH PRESSURE PORT A R1

SIZE 1 BSP R2
L8 L9
DRAIN PORT DR1
SIZE 1/2" BSP

Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9 D10
F45K 20 34 98.5 34 39 20 404 6 213 523 1 2.5 300 340 370 400 402 440 370 M16x2 M16x2 30/30 249

Note: size of high pressure ports A and B optionally PF1`` or SAE 1``

I 19
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

F Series
Final Drives 2 - Speed
The F Series is perfectly suited to any crawler and milling
machine. Thanks to compact, rugged design, high torque and
load capabilities, these solutions are the best possible option
for thes machines. All units are available with a fail-safe parking
brake and for most cartridge type fixed or variable systems.
Different disengagement systems are available on demand for
all the sizes.

HYDRAULIC SOLUTIONS

Output torque max. Ratio combinations

• 40000 Nm
Shifting stage Shifting stage
versions ratio ISS
1 5.77
Input speed max. 2 5.42
• 3500 rpm 3 4.87*
4 4.44

Applicable hydraulic motors 5 4.26

6 3.81
• Bosch-Rexroth: A6VE55 ~ 107 range
• Linde: HMV 55 ~ 75 range
• Sauer danfoss: 51C 060 ~ 080 range Main stage Shifting stage
versions ratio IMS
A 19.25
Technical features B 26*
• Two gear shifting transmission C 32.14
• Wet disc clutch unit All ratios ISS combinable with all ratios IMS
• Power shift capability Final ratio if = ISS*IMS
* Preferred ratios
• Hydraulic controlled shifting
• Integrated park & emergency brake
• Optional cooling flow to input stage and clutch unit Brake torque at input shaft Nm 600
• Different hydraulic motors Brake torque at output min. Nm 40,000
• Wide variety of ratio combinations Clutch operating pressure bar 40 ~ 60
Oil quantity l 3.3
Weight kg 186

Project related installation drawings can be available on request.

Dimensions and technical data are subject to change due to continuous product development

20 I
Overall dimensions and technical data

“A”= 94 for hydraulic motors: “A”= 124 for hydraulic motors:

Sauer 51C080 D3 Sauer 51C110
Linde HMV75 Rexroth A6VE107
Rexroth A6VE80
“A” 91 203
30 37
15 7.5 bearing center line

Total Static load rating

Co=670 [kN]
60 ∞ Dynamic load rating
C=395 [kN]
1
Ø300
Ø296

Ø304

Ø350
Ø435
Ø375

193 (Base of bearing)

M20x1.5
40 16 studs or 16 boress
45

Hydraulic motor screw

engagement depth 22
22.5°

3 44 4
5 6
Port Pressure Function
57
°

Small clutch piston pressurized

3 40 bar
T/M ratio lowgear
R13

1.5
R13
7

Large clutch piston pressurized

.5

4 40 bar
M20 2 holes T/M ratio highgear
Large & small clutch engaged,
3&4 0 bar
T/M in park break position
40
Ø3

M20 16 holes

1. Oil filling plug M22×1.5

2. Oil draining plug M22×1.5
3. Low speed clutch port R1/4"G acc. DIN3852 “X”

224
4. High speed clutch port R1/4"G acc. DIN3852 “X”
5. Flushing oil input port M22×1.5 DIN3852 “X”
6. Flushing oil output port M22×1.5 DIN3852 “X”

I 21
 O&K ANTRIEBSTECHNIK Solutions

TRAVEL DRIVES

FR Series
Wheel Drives
The FR Series is the best solution when designing large
wheeled off-road machinery. With a compact design, high
torque and load capacities, a negative multi-disk parking brake
and an optional disengagement device to tow the vehicle in
an emergency, these solutions precisely match the application
requirements.

HYDRAULIC SOLUTIONS

Gear ratios
• 28 ... 34
Max. torque (kNm)
FR20 20
FR40 40
Standard features FR60 60
• Compact structure
• High performance
• 3-7 Planetary wheels per stage Nominal torque (kNm)
• Notchless ground tooth root
FR20 16
• Different ratios FR40 23
• Integrated disc-brake FR60 30
Stated torques are peak values for short

Special executions on request duration.

• Mechanical disconnect device

22 I
Overall dimensions and technical data
Capacity of Bearing Input Hydraulic Operating Service brake 4 Park Brake 4
Type Ratio 1 Version Weight 3 torque Motor 2 pressure Pressure Locking Locking torque Release Release
C-dynamic Co-static max. (Variable) max. max. torque dyn. max. stat. pressure max. pressure max.
i kN kN kg Nm ccm bar bar Nm Nm bar bar
FR20 28-34 A 194 325 129 560 80 (105) 420 100 9,500 24,480 80 40
FR40 30-32 B 300 560 173 715 107 (-) 420 110 13,000 23,000 80 40
FR60 29-34 A 352 735 500 1,066 160 (-) 420 90 28,000 30,000 60 25

L10 L6
D7

R1
R2
D7

D2
D8
D1

D5
D6

D4
D5
D6

D4

D1
D9
D2

D3
D9
D3

L8 L9
D8

L6

L5
L5 L6
L4 L3
L5 L7 L4
L2 L2 L7
L1 L1

Version A Version B

Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9

FR20 318 141 – 9 7 50 177.5 58 110 29 – – 335 280.8 f7 375 270 f8 315 380 10xM24x2 10xM22x1.5 279.5
FR40 441 135.7 52.7 80 43 63 225 80 105 32 5 1 425 371-0.2 465 290 f8 367 405 M24(6x) M20(4x) 18xM22x1.5 340
FR60 520 270 – 10 7 60 240 156 173 37 – 1.6 425 375 f8 559 290 f8 330 554 10xM24x2 24xM22x1.5 356

1) Other ratios on demand 3) Without hydraulic motor

2) Other hydraulic motors on request 4) Multi-disk brake

I 23
 O&K ANTRIEBSTECHNIK Solutions

SLEW DRIVES

S Series
The Bonfiglioli S series provides the safest and most effective
solution for cranes, excavators and forestry machines. Its
compact design allows it to perfectly fit cranes, excavators and
special equipment where installation space is limited.

HYDRAULIC SOLUTIONS

Gear ratios
• 23 ... 187
Torque (kNm)
S5 5.5
S7 7
Standard features S10 10
• Compact structure S13 13.3
• High performance S17 17.5
S20 20
• Notchless ground tooth root
S30 30
• Integrated disc-brake S34 34
• Suitable for various hydraulic motors S35 35
S40 40
S54 54
S60 60
S62 62
S90 90
S130 130
Stated torques are peak values for short
duration.

24 I
Overall dimensions and technical data | S5 ... S17
Multi-disc brake Weight
Hydraulic
Type Ratio 1 Braking Release Output pinion 3 without Motor
motors 2
torque pressure min. (appr.)

i ccw Nm bar z/m - B - D5 kg

10/10 10/10 11/10 14/8 15/6.35
S5 25-33 28-30-32 310 14 95 79 79 69 77 - - 68
130 130 143 134 112
10/11 12/10 13/10 13/10
S7 23-27-33 45-56-63 475 14 79 79 79 98 - - - 98
141 151 158 155
12/12 13/10 13/10 13/10 13/12 13/12
S10 24-27-31-36 45-56-63-80-90 475 14 90 85 94.5 100 110 90 - 108-123
184 158 155 158 190 195
10/14 11/14 12/12 13/12 13/124 14/12 14/12
S13 36 56-63-80-90 740 18 99 99 99 88 1104 110 110 147
181 198 184 195 1904 199 201
11/14 11/16 12/12 13/124 13/14 14/16
S17 33 80-90 890 18 109 109 104 1104 122 150 - 168
198 220 184 1904 221 273

D3
L2

D2
e D4
L5

L3 L1
L4

R1
z/m
B

D5
D1

Type L1 L2 L3 L4 L5 D1 D2 D3 D4 e R1

S5 60 262 31 40 302 175 260 288 12x17.5 – 6

S7 60 296 31 40.5 336.5 230 285 322 12x17.5 – 6
S10 60 306.5-314 36 50 356.5-364 250 305 335 18x17.5 – 4
S13 71 340 30(50) 4
55(75) 4
395(415) 4
275 335 370 20x17.5 1 4
S17 86 355 50.5 55 410 275 335 370 20x17.5 – 4

1) Other ratios on demand 3) Output Pinion execution acc. to requirement

2) Other hydraulic motors on request 4) Optional

I 25
 O&K ANTRIEBSTECHNIK Solutions

SLEW DRIVES
Overall dimensions and technical data | S20 ... S40
Multi-disc brake Weight
Hydraulic
Type Ratio 1 Braking Release Output pinion 3 without Motor
motors 2
torque pressure min. (appr.)

i ccw Nm bar z/m - B - D5 kg

13/16
S20 103-79 45 553 18 120 - - - - - - 260
249
12/16
S30 45 125 1,030 18 154 - - - - - - 540
243
12/16
S34 45 160 1,030 18 154 - - - - - - 480
243
12/18
S35 35 180 1,030 18 160 - - - - - - 528
274
12/16
S40 62 90 574 18 100 - - - - - - 274
235

D3
L2

D2
e D4
L5

L3 L1
L4

R1
z/m
B

D5
D1

Type L1 L2 L3 L4 L5 D1 D2 D3 D4 e R1

S20 57 403 16 252 775 280 350 380 18 – –

S30 332 737 33 65 802 350 415 450 24x22 – 1.6
S34 332 785 33 65 808 350 415 450 24x22 – 1.6
S35 239 653 30
91 744 400 460 500 24x26 2 10
S40 64 625 16 245 721 282 375 410 18 – –

1) Other ratios on demand 3) Output Pinion execution acc. to requirement

2) Other hydraulic motors on request

26 I
Overall dimensions and technical data | S54 ... S130
Multi-disc brake Weight
Hydraulic
Type Ratio 1 Braking Release Output pinion 3 without Motor
motors 2
torque pressure min. (appr.)

i ccw Nm bar z/m - B - D5 kg

13/22 12/20
S54 48 180-200 1,200 38 230 188 - - - - - 867
357 301
13/22
S60 62 80 1,200 38 228 - - - - - -
356
14/20
S62 187 80 533 18 160 - - - - - - 564
335
16/24 16/22
S90 39 355-200 3,000 14 182 177 - - - - - 1,225
464 422
13/30
S130 67 Electric4 2,300 22.5 230 - - - - - - 2,276
480

D3
L2

D2
e D4
L5

L3 L1
L4

R1
z/m
B

D5
D1

Type L1 L2 L3 L4 L5 D1 D2 D3 D4 e R1

S54 610 780 40 87 917 460 520 562 24x26 – –

S60 – 830 40 132 962 460 520 562 26 – –
S62 60 735 20 28 763 – – – – – –
S90 80 730 173
199 929 500 640 690 18x30 – –
S130 578 622 95 160 1012 630 675 715 34x26 – –

1) Other ratios on demand 3) Output Pinion execution acc. to requirement

2) Other hydraulic motors on request 4) Hydraulic motor connection on demand

I 27
 O&K ANTRIEBSTECHNIK Solutions

CUTTER DRIVES

FA Series
Medium cutter drives
Dual stage planetary drive units with integrated pulley support,
designed for cold planers, milling machines and surface mining
machines with engine power from 80 to 1200kW and different
rotor widths. The offset input option ensures higher machine
productivity due to the increased cutting depth. The shiftable
2 speed solution allows two possible cutting speeds with huge
benefits in terms of machine performance.

HYDRAULIC SOLUTIONS

Gear ratios
• 16 ... 26
Cutting torque (kNm)
FA30 8.5
FA40 12
Standard features FA55 16
• Compact structure FA80 23
• High performance FA100 32

• Notchless ground tooth root

• Different ratios
• Integrated disc-brake Input power (kW)
• Suitable for various hydraulic motors FA30 80
FA40 110
FA55 150
FA80 220
FA100 300

28 I
Overall dimensions and technical data
Capacity of Bearing
Type Ratio 1 Version 2 Weight
C-dynamic Co-static

i kN kN kg

FA30 19-22 ST 132/194 255/325 86

ST 224 405 122

FA40 19
MI 224 405 172
ST 224 405 163
FA55 16-19-22
MI 224 405 223

FA80 19 ST 300 570 223

ST 498 1,010 330

FA100 14-21-22-26
MI 498 1,010 360

L11
D9

D9
L11
D8

D8
D13

D5
D5
D3
D2
D1

D10
D11
D12
D4
D6
D7

D3
D2
D1

D4
D6
D7
L8 L9 L8 L9

L1 L1
L4 L4 L5
L5 L6 L6
L2 L2
L3 L3
L7 L10
L7

Standard input version - ST Mechanical input version - MI

Qty. D10 D11 D12 D13 Qty.

Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9 D13

FA30 ST 13 25 75 15 29 25 278.5 28 89 – 15 2.5 2.5 – – – 269 270 305 335 M16x2 17.5 18/18 – – – – –

ST 12 35 91 21 34 26 327 38 100 – 21 2.5 2.5 270 310 345 294 295 335 370 M20x1.5 17.5 16/20 – – – – –
FA40
MI 10 10 125 55 32 26 631.5 72 100 402 55 1 2.5 270 310 360 294 295 335 370 M20x1.5 17.5 16/20 138 110 80 M16x2 6
ST 12 25 110 24 34 30 374 64 113 – 24 1 2.5 280 325 360 329 350 400 435 M20x1.5 22 24/20 – – – – –
FA55
MI 18 18 136 50 34 30 688.5 90 113 421 50 1 2.5 280 325 360 329 350 400 435 M20x1.5 22 24/20 138 110 80 M16x2 6

FA80 ST 20 35 90 22 35 24 414.5 34 123 – 22 4 2.5 330 370 410 374 400 450 490 M24x2 25 20/20 – – – – –

ST 35 35 165 28 51 43 461 32 139 – 28 12/60 5 390 460 500 407 408 460 502 M24x2 26 30/24 – – – – –
FA100
MI 8 8 182 28 40 43 843.5 27 138 540 28 1.6 2.5 325 380 415 407 408 460 502 M20x2.5 26 12/12 165 130 85 M16x2 8

1) Other ratios on demand 2) ST - Standard Input / MI - Mechanical Input (Hydraulic Motor)

I 29
 O&K ANTRIEBSTECHNIK Solutions

CUTTER DRIVES

FA Series
Large cutter drives
Dual stage planetary drive units with integrated pulley support,
designed for cold planers, milling machines and surface mining
machines with engine power from 80 to 1200kW and different
rotor widths. The offset input option ensures higher machine
productivity due to the increased cutting depth. The shiftable
2 speed solution allows two possible cutting speeds with huge
benefits in terms of machine performance.

HYDRAULIC SOLUTIONS

Gear ratios
• 14 ... 26
Cutting torque (kNm)
FA130 38
FA180 47
Standard features FA200 52
• Compact structure FA360 84
• High performance FA800 115

• Notchless ground tooth root

• Different ratios
• Integrated disc-brake Input power (kW)
• Suitable for various hydraulic motors FA130 400
FA180 450
FA200 550
FA360 880
FA800 1,200

30 I
Overall dimensions and technical data
Capacity of Bearing
Type Ratio 1 Version 2 Weight
C-dynamic Co-static

i kN kN kg
ST 750 1,290 426
FA130 14-18-21-22-26
MI 750 1,290 490

FA180 23 MI 755 1,339 637

ST 787 1,650 710

FA200 20-24
MI 787 1,650 718

FA360 25 ST 1,040 2,450 1,145

FA800 24 ST 4,300 9,650 4,223

L11
D9

D9
L11
D8

D8
D13

D5
D5
D3
D2
D1

D10
D11
D12
D4
D6
D7

D3
D2
D1

D4
D6
D7
L8 L9 L8 L9

L1 L1
L4 L4 L5
L5 L6 L6
L2 L2
L3 L3
L7 L10
L7

Standard input version - ST Mechanical input version - MI

Qty. Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 D9 D8/D9 D10 D11 D12 D13 D13

ST 18 20 215 78 57 45 530 81.4 139.2 – 37 2 2 325 380 430 449 450 500 540 M30x3.5 26 12/24 – – – – –
FA30
MI 18 20 215 78 57 45 913 81.4 139.2 585 37 2 2 325 380 430 449 450 500 540 M30x3.5 26 12/24 165 130 85 k6 M16x2 8

FA40 MI 20 20 173.5 80 56 21,5 913 81 140 576 30 2 2 325 380 – 528 529 565 – M30 M16 12/30 – – – – –

ST 20 25 160 102 58 22 603.5 75.8 149.4 – 37 2 2 323.8 381 482 540 605 635 663 M30x2 18 12/24 – – – – –
FA55
MI 20 25 160 102 58 22 890.5 75.8 149.4 438 37 2 2 323.8 381 482 540 605 635 663 M30x2 18 12/24 165 130 85 k6 M16x2 8

FA80 ST 35 100 130 40 60 80.5 657.5 75.1 214.8 – 40 18°/100/16 10 580 680 735 649.5 650 720 775 M30x3.5 M30x3.5 30/30 – – – – –

FA100 ST 20 25 229 60 95 89 981 (3) (3)

– 60 6 8 830 980 1050 930 1040 1250 1329 M30x2 M30x2 48/48 – – – – –

1) Other ratios on demand 3) Special bearing

2) ST - Standard Input / MI - Mechanical Input (Hydraulic Motor)

I 31
 O&K ANTRIEBSTECHNIK Solutions

CUTTER DRIVES

FA Series
Cutter Drives 2-Speed
Dual stage planetary drive units with integrated pulley support,
designed for cold planers, milling machines and surface mining
machines with engine power from 80 to 1200kW and different
rotor widths. The offset input option ensures higher machine
productivity due to the increased cutting depth. The shiftable
2 speed solution allows two possible cutting speeds with huge
benefits in terms of machine performance.

HYDRAULIC SOLUTIONS

Gear ratios
• 13 ... 22
Cutting torque (kNm)
FA130-2S 38
FA200-2S 47
Standard features
• Two speed shifting transmission
• Main drive from proven cutter standard range (FA130/FA200) Input power (kW)
• Hydraulic shifting unit for gear change
FA130-2S 400
• Cutter main drive & shifting unit modular concept for easy manteinance
FA200-2S 540

32 I
Overall dimensions and technical data
Capacity of Bearing Shifting pressure
Type Version Ratio Version Weight
C-dynamic Co-static Min. Max.

i kN kN kg bar bar
1 21-13.67
FA130 - 2S ccw 750 1,290 900 35 50
2 22.235-18.01
1 19.877-13
FA200 - 2S ccw 787 1,650 1,050 35 50
2 21.05-17.05

L2

A
D13

B L5 L6
D9

C
D1
D10
D11
D12
D3
D2

L4
L1

D5

L9
D14

D4
D6
D7
D8

L11

R1
L8
L3
L10
L7
A. Flushing port oil in
B. Shifting port 50 bar
C. Flushing port oil out

L7
Type L1 L2 L3 L4 L5 L6 L8 L9 L10 L11 R1 R2
optional

FA130 - 2S 207.65 25 822.2 413 57 45 1418 1442.5 688.6 139.2 822.2 40 2

FA200 - 2S 207.65 25 807.2 413 32 25 1378 1402.5 683 149.4 1025 40 2

Qty. Qty. D10 D10 D11 D11 D12 D12 D13 Qty.
Type D1 D2 D3 D4 D5 D6 D7 D8 D9 D13
D8 D9 optional optional optional optional D13
FA130 - 2S 264.265 342.9 393 449 450 500 540 1.25-7 UNC 12 26 24 228.6 196.85 140 158.75 140 120.7 5/8-11 UNC STUD 5/8-11 UNF 8
FA200 - 2S 264.265 342.9 393 533.5 590.8 641.35 679.32 1.25-7 UNC 12 19.84 20 228.6 196.85 140 158.75 140 120.7 5/8-11 UNC STUD 5/8-11 UNF 8

I 33
 O&K ANTRIEBSTECHNIK Solutions

WINCH DRIVES
Classification of crane
Boom Trolley Crane
Hoisting Slewing Activation Travelling Travelling

Erection cranes M 2 -M 3 M 2 -M 3 M 1 -M 2 M 1 -M 2 M 2 -M 3

Loading bridges hook M 5 -M 6 M4 — M 4 -M 5 M 5 -M 6

grab or
Loading bridges M 7-M 8 M6 — M 6 -M 7 M 7-M 8
magnet

Workshop cranes M6 M4 — M4 M5

Overhead travelling cranes, grab or M8 M6 — M 6 -M 7 M 7-M 8

ram cranes, scrap yard cranes magnet

Unloading bridges, hook or M 6 -M 7 M 5 -M 6 M 3 -M 4 M 6 -M 7 M 4 -M 5

container gantry cranes spreader

Other gantry cranes hook M 4 -M 5 M 4 -M 5 — M 4 -M 5 M 4 -M 5

(with trolley and/or live ring)

Unloading bridges, container gantry cranes grab or M8 M 5 -M 6 M 3 -M 4 M 7-M 8 M 4 -M 5

(with trolley and/or live ring) magnet

Berth cranes, shipyard cranes, hook M 5 -M 6 M 4 -M 5 M 4 -M 5 M 4 -M 5 M 5 -M 6

dismantling cranes

Dockside cranes (slewable, gantry type, ...), hook M 6 -M 7 M 5 -M 6 M 5 -M 6 — M 3 -M 4

floating cranes, floating sheerlegs

Dockside cranes (slewable, gantry type, ...), grab or M 7-M 8 M 6 -M 7 M 6 -M 7 — M 4 -M 5

floating cranes, floating sheerlegs magnet

Floating cranes and floating sheerlegs for M 3 -M 4 M 3 -M 4 M 3 -M 4 — —

very high loads (normally above 100 t)

Shipboard cranes hook M4 M 3 -M 4 M 3 -M 4 M2 M3

grab or
Shipboard cranes M 5 -M 6 M 3 -M 4 M 3 -M 4 M 4 -M 5 M 3 -M 4
magnet

Tower cranes M4 M5 M4 M3 M3
for construction sites

Derrick tower gantry M 2 -M 3 M 1 -M 2 M 1 -M 2 — —

Railroad cranes, approved M 3 -M 4 M 2 -M 3 M 2 -M 3 — —

for service in trains

Vehicle-mounted cranes hook M 3 -M 4 M 2 -M 3 M 2 -M 3 — —

34 I
Torque conversion factors k
according to FEM 1.001 3rd edition, Section 1
T2 T3 T4 T5 T6 T7 T8

Average usage per day [h] 0.25 - 0.5 0.5 - 1 1 -2 2 -4 4 -8 8 - 16 about 16

Total service life [h] 400 - 800 800 - 1600 1600 - 3200 3200 - 6300 6300 - 12500 12500 - 25000 25000 - 50000

Duty cycle load class Machine class & torque conversion factor K

M1 M2 M3 M4 M5 M6 M7
L1 light 1.24 1.24 1.11 1.11 0.95 0.91 0.85

M2 M3 M4 M5 M6 M7 M8
L2 medium 1.24 1.24 1.08 1 0.87 0.80 0.67

M3 M4 M5 M6 M7 M8 M8
L3 heavy 0.98 0.95 0.91 0.80 0.71 0.59 0.56

M4 M5 M6 M7 M8 M8 M8
L4 extremely heavy 0.80 0.75 0.71 0.63 0.56 0.5 0.44

Definition of Nominal Torque TNom

• Drum output speed 25 rpm
• FEM class M5 / T5 / L2

Torque calculation Teff for alternative FEM – class

• Teff = K × TNom
• K: torque conversion factor

Additional check - conditions

1. For all machine classes > M5 (M6-M8): to be checked, whether drum output
speed 25rpm must be reduced. Refer to Bonfiglioli Sales or Application
engineering.
2. Brake torque safety must be checked upon formula:
TBrake x i
V= Teff
> 1.6

TBrake: brake torque at drive input

i: drive ratio
If brake safety < 1.6 refer to Bonfiglioli Sales or Application engineering.

I 35
 O&K ANTRIEBSTECHNIK Solutions

WINCH DRIVES

FW Series
Small winch drives
The planetary winch gearboxes of the FW Series are suitable for
a large spectrum of winch applications thanks to the availability
of a wide torque range. The compact design allows the gearbox
to be integrated into the winch drum. The failsafe brake can
be integrated inside the gearbox or mounted externally, with
common lubrication for the gears. Electrically driven versions are
available with both in-line and right-angle configurations.

HYDRAULIC ELECTRIC
SOLUTIONS SOLUTIONS

Gear ratios
• 19 ... 409
Torque TNom (kNm)
FW10 5.4
FW13 7.25
Standard features FW30 17.6
• Compact structure FW40 20
• Robust layout of planetary gear unit FW40A 20

• Robust taper roller bearings for drum support and cable pull
• Integrated disc-brake
• Easy oil change from front side
• Easy drum mounting
• High variety of ratios and hydraulic motors

36 I
Overall dimensions and technical data

Type Ratio 1 Max Rope Pull Output Torque Peak

i ton Nm

FW10 35-51 2..4 10.000

FW13 93-108-122-140-178-229 4..6 13.000

FW30 19-32-61-66-81-90-101-114-121-137-171-228-305 6..8 30.000

FW40 19-22-32-61-66-81-85-101-110-117-124-142-181-222-266-409 8..10 40.000

L7

Z
D8

D7
D3

D5
D2

L8 L9
D6
D1

D4

L4
Detail Z R1
Flange Flange
version A version B R2
L5 L6
D9

D9

L2 L3

D9 D9 Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 Vers. A Vers. B D8/D9
FW10 10 30 72 13.5 15 16 230 28 79 0.6 0.6 190 230 256 216 220 260 290 M16x2 M16x2 17 12/8
FW13 10 30 72 13.5 15 16 255 28 79 0.6 0.6 190 230 256 216 220 260 290 M16x2 M16x2 17 12/8
FW30 13 25/22 75 15 29 25 323/320 28.5 89 2.5 2.5 240 275 304 269 270 305 335 M16x2 M16x2 17 18/18
FW40 16 16 91 21 34 26 338 38 100 2.5 2.5 240 285 320 294 295 335 370 M16x1.5 M16x1.5 17.5 20/20
FW40A 13 35 91 21 34 26 357 38 100 2.5 2.5 270 310 345 294 295 335 370 M16x1.5 M16x1.5 17.5 16/20

1) Other ratios on demand

I 37
 O&K ANTRIEBSTECHNIK Solutions

WINCH DRIVES

FW Series
Medium winch drives
The planetary winch gearboxes of the FW Series are suitable for
a large spectrum of winch applications thanks to the availability
of a wide torque range. The compact design allows the gearbox
to be integrated into the winch drum. The failsafe brake can
be integrated inside the gearbox or mounted externally, with
common lubrication for the gears. Electrically driven versions are
available with both in-line and right-angle configurations.

HYDRAULIC ELECTRIC
SOLUTIONS SOLUTIONS

Gear ratios
• 14 ... 228
Torque TNom (kNm)
FW55 25.4
FW55A 25.4
Standard features FW55B 25.4
• Compact structure FW80 42.8
• Robust layout of planetary gear unit FW100 70

• Robust taper roller bearings for drum support and cable pull
• Integrated disc-brake
• Easy oil change from front side
• Easy drum mounting
• High variety of ratios and hydraulic motors

38 I
Overall dimensions and technical data

Type Ratio 1 Max Rope Pull Output Torque Peak

i ton Nm

FW55 16-19-22-32-63-68-87-94-103-117-124-137-148-185 10..12 55.000

FW80 19-32-61-81-101-114-121-137-147-171-187-206-228 12..16 80.000

FW100 14-21-22-26-32-77-84-95-121-142-175-192-226 16..24 10.000

L7

Z
D8

D7
D3

D5
D2

L8 L9
D6
D1

D4

L4
Detail Z R1
Flange Flange
version A version B R2
L5 L6
D9

D9

L2 L3

D9 D9 Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 Vers. A Vers. B D8/D9
FW55 12 25 110 24 36 30 413 64 113 1 2.5 280 325 360 340 350 400 435 M20x1.5 M20x1.5 22 24/20
FW55A 20 30 91 24 36 30 399 45 113 4 2.5 240 285 320 340 350 400 435 M20x1.5 M20x1.5 22 20/20
FW55B 12 37 110 24 36 30 425 64 113 1 2.5 290 335 370 340 350 400 435 M20x1.5 M20x1.5 22 20/20
FW80 20 35 90 22 37 24 415 34 123 4 2.5 330 370 410 374 400 450 490 M24x2 M24x2 26 20/20
FW100 35/37 35/37 165 28 53 43 461/463 32 139 10 (12)/60 5 390 460 500 407 408 460 500 M24x2 M24x2 26 30/24

1) Other ratios on demand

I 39
 O&K ANTRIEBSTECHNIK Solutions

WINCH DRIVES

FW Series
Large winch drives
The planetary winch gearboxes of the FW Series are suitable for
a large spectrum of winch applications thanks to the availability
of a wide torque range. The compact design allows the gearbox
to be integrated into the winch drum. The failsafe brake can
be integrated inside the gearbox or mounted externally, with
common lubrication for the gears. Electrically driven versions are
available with both in-line and right-angle configurations.

HYDRAULIC ELECTRIC
SOLUTIONS SOLUTIONS

Gear ratios
• 14 ... 810
Torque TNom (kNm)
FW130 100
FW180 112.5
Standard features FW220 140
• Compact structure FW260 175
• Robust layout of planetary gear unit FW360 210
FW440 210
• Robust taper roller bearings for drum support and cable pull
FW560 280
• Integrated disc-brake FW620 330
• Easy oil change from front side FW700 399
• Easy drum mounting FW800 456
• High variety of ratios and hydraulic motors FW1100 627

40 I
Overall dimensions and technical data

Type Ratio 1 Max Rope Pull Output Torque Peak

i ton Nm
FW130 14-18-21-22-43-55-70-81-85-95-115-123-141-159-167-180-206 24..32 13.000
FW180 23-206-222-256-281 32..34 180.000
FW220 69-97-120-165-191-248-290-345-810 34..40 220.000
FW260 69-97-148-168-243-251-345 40..46 260.000
FW360 25-94-128-160-168-186-223-242-257-283-340-343-490 46..52 360.000
FW440 310-352-415-555-637 52..54 440.000
FW560 250-357-388-519-739 54..65 560.000
FW620 30-250-293-328-495 65..70 620.000
FW700 377-648 70..76 700.000
FW800 23-283-298 76..88 800.000
FW1100 404-406 88..104 1.100.000

L7

Z
D8

D7
D3

D5
D2

L8 L9
D6
D1

D4

L4
Detail Z R1
Flange Flange
version A version B R2
L5 L6
D9

D9

L2 L3

D9 D9 Qty.
Type L1 L2 L3 L4 L5 L6 L7 L8 L9 R1 R2 D1 D2 D3 D4 D5 D6 D7 D8 Vers. A Vers. B D8/D9
FW130 45 45 190 35 58 45 530 50.5 147 25 4 390 500 550 449 450 500 550 M24x2 M24x2 26 32/32
FW180 30 30 168 40 56 21.5 534.5 50.3 141.4 4 3 450 510 560 528 535 600 650 M24x2 M24x2 26 30/30
FW220 18 52 166.5 40 61 35 580.5 16 187.5 35°/16/16 4 460 600 650 540 542 600 650 M24x2 M24x2 26 38/38
FW260 21 45 170 40 48 60 579 18.5 189.5 2 – 460 520 570 608 610 680 735 M30x2 M30x2 32 24/24
FW360 100 100 130 40 60 80 658 -25 215 18°/100/16 10 580 680 735 649 650 720 775 M30x3.5 M30x3.5 32 30/30
FW440 40 43 255 40 25 25 820 80 213 4 4 450 515 569 669 570 620 670 M36x3 M30x3 32 30/30
FW560 40 43 255 45 45 120 831.5 80 213 4 4 450 515 569 763 570 620 670 M36x1.5 M30x1.5 32 29/42
FW620 30 33 405 96 – 306 1159 99 287 4 5 668 726 779 – 782 830 880 M36x1.5 M30x2 32 30/45
FW700 30 33 405 96 – 306 1283.5 99 287 4 5 668 726 779 – 780 850 900 M36x1.5 M36x1.5 38 30/45
FW700A 30 33 405 96 – 306 1372.5 99 287 4 5 668 726 779 – 780 850 900 M36x1.5 M36x1.5 38 30/45
FW800 20 25 229 60 58 170 1315 161/163 257/253 6 8 830 980 1050 916 920 976 1055 M30x2 M30x2 32 48/48
FW1100 57 60 503 74 – – 1483 176 368 10 6 1110 1230 1310 1116 - 1170 1226 M36x4 M30x3.5 32 48/52

1) Other ratios on demand

I 41
 O&K ANTRIEBSTECHNIK Solutions

WINCH DRIVES
Winch system for vertical drills with external or internal brake

Machine weight tons Winch Drive

Up to 15 FW13

15–20 FW30

20–28 FW30

28–33 FW40

33–40 FW40

40–50 FW55

50–70 FW80

70–80 FW130

80–100 FW130

100–120 FW180

120–150 FW180

150–180 FW220

180–200 FW620

200–300 FW1100

42 I
WINCH DRIVES

Winch system for harbour cranes

General requierements
• Planetary drive
• Winch drum
• Dynamic safety brake & elastic couplings
• Winch drum support / Torque arm
• Motor support for IEC electric motor

F560TPS F260TPS

Ratio gearbox (-) 38.462 36

Nominal load t 50 32

FEM – CLASS (-) M8 - T9 M8 - T7

Requested lifetime according FEM h 50000 25000

Drum winding diameter mm 950 725

Rope diameter mm 38 29

Nominal torque Nm 129941 65166

Max rope speed (empty) m/min 140 120

Max torque (grab bulk mode) Nm 253700 155800

Max drum speed (grab bulk mode) U/min 14 23,7

Max torque (cargo mode) Nm 259900 130300

Max drum speed (cargo mode) U/min 36.9 35.2

I 43
 O&K ANTRIEBSTECHNIK Solutions

OTHER DRIVES

FTU Series
Torque units and tunneling drives
The FTU Series are perfectly suited to tunnel boring machines
and large mining equipment. Robust, powerful and durable
these drives are matching all the requirements of this specific
application.

HYDRAULIC SOLUTIONS

Gear ratios
• 19.8 ... 1500
Torque (kNm)
FTU260 260
FTU280 280
Standard features FTU620 620
• Compact structure FTU800 800
• High performance FTU1300 1300
FTU2200 2200
• 3–7 Planetary wheels per stage
FTU3000 3000
• Notchless ground tooth root
• Different ratios
• Different input options
• Different output options
• Optional integrated disc-brake

Special executions on request

• Water jacket
• Oil & air cooling system
• Safety clutch

44 I
Overall dimensions and technical data

Type Ratio - Range Input options Output options

(-)
FTU260 52 ... 1,500 (1) (2)
FTU280 57 ... 1,500 (1) (2)
FTU620 24 ... 1,500 (1) (2)
FTU800 24.5 ... 1,500 (1) (2)
FTU1300 34.7 ... 1,500 (1) (2)
FTU2200 19.8 ... 1,500 (1) (2)
FTU3000 19.8 ... 1,500 (1) (2)

L7
L2 L3 L5 L6
L1 L4 Main Output Section Ratio Section Input Section
D6

Input Options
see remark (1)
D4

D5
D1
D3
D2

Output Options see remark (2)

Qty.
Type L1 L2 L3 L4 L5 L6 L7 D1 D2 D3 D4 D5 D6 D6
FTU260 15 340 650 65 (3) (3) 990 630 690 750 660 (3) 26 36
FTU280 31 646 365 60 (3) (3) 1011 630 770 820 600 (3) 26 36
FTU620 60 95 640 54 (3) (3) (3) 895 1000 1060 885 (3) 33 36
FTU800 65 100 730 58 (3) (3) (3) 955 1010 1090 920 (3) 33 48
FTU1300 80 110 938 75 (3) (3) (3) 1240 1330 1430 1224 (3) 45 52
FTU2200 125 142.5 1112 100 (3) (3) (3) 1340 1440 1540 1216 (3) 45 48
FTU3000 125 142.5 1112 80 (3) (3) (3) 1340 1440 1540 1216 (3) 45 48

1) Input options: 2) Output options: 3) Depending on ratio and input/output

Hydraulic Motor Spline Shaft option
Electric Motor Spline Hollow Shaft
Angular / Bevel Gear Hollow Shaft Shrink Disk
Spline Shaft Key Shaft
Spline Hollow Shaft Flange
Hollow Shaft Shrink Disk
Key Shaft
Flange

I 45
 O&K ANTRIEBSTECHNIK Solutions

OTHER DRIVES

Jack-up drives
The specific design of the O&K Jack-up Series has been assessed by ABS to work in lifting and lowering legs and hulls
of drilling and service jack up rigs, lift boats and windmill installation vessels. Units can be in-line or have a drop box
for offsetting the motor installation. They can be electrically or hydraulically driven, with or without a negative parking
brake. These jack-up drives can deliver integrated pinions from m50 to m100 and lantern pieces with integrated torque
arm for easy installation. Units have class approval from ABS and DNV GL, and full 3.2 certification of the load-bearing
parts of the gear transmission with full traceability from raw material to final machined component.

HYDRAULIC SOLUTIONS ELECTRIC SOLUTIONS

Max. jacking load

• 560 metric tons / 600 short tons / 1,230 Kips
Max jacking (kNm)
JD2400 1900

Max. holding torque

• Up to 2,400 kNm

Max. storm holding torque

• Up to 2,900 kNm

Applicable motors
• Piston hydraulic motors
• Electric motors IEC

46 I
Overall dimensions and technical data
2971.4
1360
343.5
320 310 80 80

ø1450
ø1260

ø1350
ø399.77

ø1230
ø1015
701.5

ø45
8
48 BOHRUNGEN HOLES
7.5° x 48 = 360°

ø450
1729
437.5
80 80
ø1450
ø1350
ø1260

ø1230

701.5
ø45

8
48 BOHRUNGEN HOLES
7.5° x 48 = 360°
ø450

I 47
 O&K ANTRIEBSTECHNIK Solutions

MATCHING PRODUCTS/APPLICATIONS
CHARTS
Excavator travel drive CE Trencher
Excavator weight tons Track Drive Slew Drive Machine weight tons Track Drive

6–8 F10 S5 20–30 F55

8–10 F13 S5 30–40 F80
10–12 FD20 S5 40–50 F100
12–18 F30 S7 50–80 F130
18–22 F40 S10 80–100 F180
22–28 F55 S13 100–120 F220
28–35 F80 S17 120–150 F280
35–50 F100 S30 150–180 F360
50–70 F130 S30
70–90 F180 S34

Crusher / Screener Towing tractors

Machine weight tons Track Drive Maximum output torque Wheel Drives Aircraft weight

20–30 F30 19 FR20 160 ton

30–40 F40 23 FR40 300 ton
40–50 F55 30 FR60 600 ton
50–70 F80
70–90 F100
90–110 F130

Excavator travel drive mining Crawler crane

Excavator weight tons Track Drive Slew Drive Crane lifting capacity tons Travel Drive Winch Drive

50–70 F130 S30 40 F80 (2x) FW80

70–90 F180 S34 80 F100 (2x) FW80
90–120 F220 S54 (1x) 100 F130 (2x) FW100
120–150 F280 S54 (1x) 130 F180 (2x) FW100
150–180 F360 S54 (2x) 160 F260 (2x) FW130
180–220 F420 S54 (2x) 250 F440 (2x) FW130
220–300 F620 S54 (3x) 300 F560 (2x) FW180
300–400 F800 S54 (3x) 350 F620 (2x) FW220
400–500 F1100 S54 (4x) 400 F650 (2x) FW220
500–600 F1300 S54 (4x) 600 F700 (2x) FW220
600–800 F1800 S54 (5x) 600 F740 (2x) FW260
800–1000 F2200 S54 (6x) 800 F560 (4x) FW260
1200–1400 F3000 S130 (4x) 1200 F750 (4x) FW220 (2x)
2500 F1800 (4x) FW220 (2x)
4000 F2200 (4x) FW360 (2x)

48 I
MATCHING PRODUCTS/APPLICATIONS
CHARTS
Excavator Travel Compact Drives Drilling Rigs
Machine weight tons Track Drive Machine weight tons Track Drive Slew Drive Winch Drive

14–18 F30K Up to 15 FD20 S5 FW13

18–22 F45K 15–20 F30 S7 FW30
22–28 F55K 20–28 F40 S10 FW30
28–35 F80K 28–33 F40 S13 FW40
35–50 F100K 33–40 F55 S17 FW40
40–50 F80 S20 FW55
50–70 F100 S30 FW80

Paver 70–80 F100 S30 FW130

80–100 F130 S20 (2x) FW130
Machine weight tons Track Drive 100–120 F180 S20 (2x) FW180
120–150 F220 S54 FW180
Up to 10 FD20
150–180 F280 S20 (3x) FW220
10–14 F30
180–200 F360 S20 (3x) FW620
14–20 F40
200–300 F620 S54 (3x) FW1100
20–24 F55
24–33 F80

Soil Compactor Road Milling Machine / Surface Mining

Machine weight tons Drum Drive
Machine - by weight
2.5–5 n.a. Machine weight tons Track Drive
5–7 F10
5–8 F10
7–9 FD20
8–25 F30
9–12 F30
25–36 F55
12–16 F40
36–45 F80
16–18 F55
18–20 F80
20–25 F100

Road Milling Machine / Surface Mining

Vibrating Tandem Roller Machine - by input power
Machine weight tons Track Drive Input power kW Cutter Drive Cutting Torque

1–1.5 n.a. 80 FA30 8.5 kNm

1.5–2.5 n.a. 110 FA40 12 kNm
2.5–5 n.a. 150 FA55 16 kNm
5–7.5 F10 220 FA80 23 kNm
7.5–12 FD20 300 FA100 32 kNm
12–13 F30 400 FA130 38 kNm
13–15 F40 500 FA200 47 kNm
15–17 F55 880 FA360 84 kNm
17–20 F80 1200 FA800 115 kNm

I 49
 OUR GLOBAL PRESENCE
Thanks to an international network of closely interconnected commercial and prodiction sites, we can guarantee
the same high standards of Bonfiglioli quality anywhere at any given time. We know that our direct presence in local
markets is the key to long-lasting success, so our family includes 15 production sites, 24 commercial sites and more
than 550 distributors around the world.

Our organization is always close by, offering complete and efficient solutions and supporting our customers
with dedicated services, co-engineering and after-sales assistance.

PRODUCTION SITES COMMERCIAL SITES

COUNTRIES DISTRIBUTORS PEOPLE

OK_CAT_RANGE_STD_ENG_R03_2

50 I
AUSTRALIA INDIA SINGAPORE
Bonfiglioli Transmission (Aust.) Pty Ltd Bonfiglioli Transmission Pvt. Ltd. Bonfiglioli South East Asia Pte Ltd
2, Cox Place Glendenning NSW 2761 Mobility & Wind Industries 8 Boon Lay Way, #04-09,
Locked Bag 1000 Plumpton NSW 2761 AC 7 - AC 11 Sidco Industrial Estate 8@ Tadehub 21, Singapore 609964
Tel. +61 2 8811 8000 Thirumudivakkam Chennai - 600 044 Tel. +65 6268 9869
Tel. +91 844 844 8649

BRAZIL SLOVAKIA
Bonfiglioli Redutores do Brasil Ltda Discrete Manufacturing & Bonfiglioli Slovakia s.r.o.
Travessa Cláudio Armando 171 - Bloco 3 Process Industries - Motion & Robotics Robotnícka 2129
CEP 09861-730 - Bairro Assunção Survey No. 528/1, Považská Bystrica, 01701 Slovakia
São Bernardo do Campo - São Paulo Perambakkam High Road Mannur Tel. +421 42 430 75 64
Tel. +55 11 4344 2322 Village,
Sriperumbudur Taluk Chennai - 602 105
Tel. +91 844 844 8649
SOUTH AFRICA
CHINA Bonfiglioli South Africa Pty Ltd.
Bonfiglioli Drives (Shanghai) Co. Ltd. 55 Galaxy Avenue, Linbro Business Park,
#68, Hui-Lian Road, QingPu District, Discrete Manufacturing & Sandton, Johannesburg
201707 Shanghai Process Industries 2090 South Africa
Tel. +86 21 6700 2000 Plot No.A-9/5, Phase IV MIDC Chakan, Tel. +27 11 608 2030
Village Nighoje Pune - 410 501
Tel. +91 844 844 8649

Motion & Robotics SPAIN

#568, Longpan Road, Jiading District, Tecnotrans Bonfiglioli S.A
201707 Shanghai ITALY Pol. Ind. Zona Franca, Sector C,
Bonfiglioli Riduttori S.p.A. Calle F, nº 6 - 08040 Barcelona
Discrete Manufacturing & Tel. +34 93 447 84 00
Process Industries
Bonfiglioli Trading (Shanghai) Co. Ltd. Via Cav. Clementino Bonfiglioli, 1
Room 423, 4th Floor, #38, Yinglun Road, 40012 Calderara di Reno
China (Shanghai) Pilot Free Trade Zone, Tel. +39 051 6473111 TURKEY
Shanghai Bonfiglioli Turkey Jsc
Atatürk Organize Sanayi Bölgesi,
10007 Sk. No. 30
Discrete Manufacturing & Atatürk Organize Sanayi Bölgesi,
FRANCE Process Industries 35620 Çiğli - Izmir
Bonfiglioli Transmission s.a. Via Sandro Pertini, lotto 7b Tel. +90 0 232 328 22 77
14 Rue Eugène Pottier 20080 Carpiano
Zone Industrielle de Moimont II Tel. +39 02985081
95670 Marly la Ville
Tel. +33 1 34474510 UNITED KINGDOM
Bonfiglioli UK Ltd.
Discrete Manufacturing & Unit 1 Calver Quay, Calver Road, Winwick
Process Industries Warrington, Cheshire - WA2 8UD
GERMANY Via Saliceto, 15 - 40010 Bentivoglio Tel. +44 1925 852667
Bonfiglioli Deutschland GmbH
Sperberweg 12 - 41468 Neuss
Tel. +49 0 2131 2988 0
Mobility & Wind Industries USA
Via Enrico Mattei, 12 Z.I. Villa Selva Bonfiglioli USA Inc.
47122 Forlì 3541 Hargrave Drive
Bonfiglioli Vectron GmbH Tel. +39 0543 789111 Hebron, Kentucky 41048
Europark Fichtenhain B6 - 47807 Krefeld
Tel. +1 859 334 3333
Tel. +49 0 2151 8396 0

Motion & Robotics

Via Unione, 49 - 38068 Rovereto VIETNAM
O&K Antriebstechnik GmbH Tel. +39 0464 443435/36 Bonfiglioli Vietnam Ltd.
Ruhrallee 8-12 - 45525 Hattingen
Lot C-9D-CN My Phuoc Industrial Park 3
Tel. +49 0 2324 2050 1
Ben Cat - Binh Duong Province
Tel. +84 650 3577411
NEW ZEALAND
Bonfiglioli Transmission (Aust.) Pty Ltd
88 Hastie Avenue, Mangere Bridge,
2022 Auckland
PRODUCTION PO Box 11795, Ellerslie
Tel. +64 09 634 6441
ASSEMBLY

SALES

SERVICE
We have a relentless commitment to excellence,
innovation & sustainability. Our team creates, distributes and
services world-class power transmission & drive solutions to
keep the world in motion.

HEADQUARTERS
Bonfiglioli S.p.A
Registered office: Via Cav. Clementino Bonfiglioli, 1
40012 Calderara di Reno - Bologna (Italy)
Tel. +39 051 6473111
Head office: Via Isonzo, 65/67/69
40033 Casalecchio di Reno - Bologna (Italy)