Certificate of Conformity
Certificate Number: CN-PV-210170
On the basis of the tests undertaken, the samples of the below product have been found to comply with the
requirements of the referenced specifications /standards at the time the tests were carried out. It does not imply that
Intertek has performed any surveillance or control of the manufacture. The manufacturer shall ensure that the
manufacturing process assures compliance of the production units with the examined products mentioned in this
certificate.
Applicant: BELENUS LTDA
Rua Comendador Joao Lucas,300 Distrito Industrial,Vinhedo- SP CEP:13288-184 -
Brasil CNPJ:05.151.518/0001-40
Product: Grid-Connected PV Inverter
Ratings & Principle See Appendix to Certificate of Conformity
Characteristics:
Models: BEL-15K-G-LV; BEL-20K-G-LV; BEL-25K-G-LV; BEL-30K-G-LV;
BEL-35K-G-LV
Brand name:
Tested according to: ABNT NBR 16149:2013
ABNT NBR 16150:2013
ABNT NBR IEC 62116: 2012
ANEXO III – parte 2, Portaria n,º 357, de 01 de agosto de 2014
Certificate Issuing Intertek Testing Services Ltd. Shanghai
Office Name & Address: West Area, 2nd Floor, No. 707, Zhangyang Road China (Shanghai) Pilot Free
Trade Zone, Shanghai, P. R. China
Test Reports No: 210604057GZU-001
Additional information in Appendix.
Signature
Certification Manager: Grady Ye
Date: 12 July 2021
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek.
Intertek Page 1 of 2 SFT-PV-OP-23a (18-Dec-2019)
APPENDIX: Certificate of Conformity
This is an Appendix to Certificate of Conformity Number: CN-PV-210170.
Ratings &
Principle Model
Characteristics: BEL-15K-G- BEL-20K-G- BEL-25K-G- BEL-30K-G- BEL-35K-G-
LV LV LV LV LV
VMAX PV [Vdc] 800
DC Voltage Range
200-700
[Vdc]
Max, Input Current
2*30 2*30 4*30 4*30 4*30
IMAX [A]
MPP Full Power
450-700
Voltage Range [Vdc]
Start PV Voltage [Vdc] 250
Rated Output Voltage
3W/N/PE 127/220
Ur [Vac]
Rated Output
60
Frequency FNETZ [Hz]
Rated Output Power PE
15 20 25 30 35
[kW]
Max, Output Current
3*43,3 3*57,8 3*72,2 3*86,6 3*101,1
Imax [A]
Power Factor cosφ [λ] >0.99
Efficiency max, ηmax 98.7%
Enclosure Protection
IP65
(IP)
Operating
Temperature Range -25℃~+60℃
[ºC]
Pollution degree (PD) PD3
Size (W/H/D) [mm] 633/532/285
Weight [kg] 54
Hardware: Ver2.5
Firmware
Software: Ver1973
This Certificate is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Certificate. Only the Client is authorized to permit copying or distribution of this Certificate. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek.
Intertek Page 2 of 2 SFT-PV-OP-23a (18-Dec-2019)