05-C-HQLEAFLET-EN

Printed in Belgium
High-end Car Audio 2005
The quest for perfect car audio

Achieving the ideal in-car sound — where all signals are

expressed in their purest form — was no more than a dream. The

sound quality and the sound stage have been compromised,

using the harsh cabin environment as an excuse, with its

irregular shape, narrow space, numerous listening positions and

the inherent internal and external noises. It had never been

possible to bridge the final gap, and experience the true original

sound with all of its subtle refinements.

Until now.

Even the finest details, which before faded into silence, can now

be heard. There is no more awareness of speakers, no concept of

positioning. Only a total immersion in pure and natural sound

with superior expression.

3
4
 Pioneer was intent on solving the dilemma of imperfect in-car sound. A team of top Pioneer engineers set out to

design the ultimate hi-fi system, and then adapt it for the car. Their goal was to transcend ‘digital’ sound, and create

a system that sounded more natural and lifelike than any other system. This standard was stringently applied;

nothing short of ‘natural sounding’ was accepted. In order to meet these strict standards, entirely new techniques

and materials were developed. No compromises whatsoever. No expense was spared.

Once these incredibly high-level components were ready, they were connected with an optical digital link. So the

signal, from source to power amp, maintained the utmost purity. This optical digital transmission was absolutely

essential to the systems’ overall performance. Consequently, the Optical Digital Reference (ODR) system was born,

the finest entertainment system ever built for the car.

Matched up with individually handcrafted RS speakers, ODR components deliver a truly unparalleled performance.

Pioneer sees no boundaries to perfection, especially when it comes to these legendary speakers.

For those who appreciate the finest, and demand the best…

Car audio perfection has finally arrived

5
6
Treat your senses to the real sound of music

The revolutionary Optical Digital Reference (ODR) system is the only answer to perfect in-car sound quality. Specially selected parts and state-of-the-art technology

combine to create the ideal music space within a vehicle. Totally essential to the system’s superior performance is the optical digital transmission system. With an optical

digital connection between the CD tuner and amplifier, transmission of the audio signal is completely digital. That means no deterioration of sound quality from D/A or

A/D conversion. The ODR system also avoids noise typical of analogue or coaxial connections. The sound remains unaffected by electromagnetic radiation or electrical

noise inside the car, of any kind. This Pure Digital System accurately transmits the music signal, resulting in beautifully clear and vivid audio, completely free of distortion

— the ultimate pure sound. And there’s more. The digital tuning system with a high-precision DSP uses a number of complex sound stage control techniques to

accomplish the ideal interior acoustics within the cabin, giving you a much more natural sound stage. Even control of all system components is state-of-the-art, from the

CD tuner to the digital amplifiers to the high-end RS speakers. These RS speakers are handcrafted by top Pioneer speaker designers. Specially designed for the ODR

system, no expense was spared to create the absolute highest level of speaker performance. Only with the ODR system and high-end RS speakers you can achieve the

ideal sound reproduction, with the signals as pure as possible. For the first time, you will hear the subtlest sound details, and the real contour of music in your car.

True and pure, just like the original.

Optical Digital Reference (ODR) System & High-end RS Speakers 7

Optical Digital Reference (ODR) System

RS-D7R SYSTEM CONTROL CD TUNER NEW

Achieve true sound perfection with Pioneer’s revolutionary top-class System Control CD Tuner. Paired with the RS-A9 Digital Amplifier, this

superior headunit makes up part of Pioneer’s Optical Digital Reference system. This pure digital system accurately conveys music signals using

an optical digital transmission. It prevents the influence of noise from the vehicle’s electrical components and transmits the waveform of the

original source without degradation, creating the ultimate in pure sound. Each part of this unit was specifically designed to be the very best. Only

then the finest details and most delicate music signals from a CD can be transmitted, in their purest form, from the control unit to the amplifier

and finally to the speaker. This high-quality CD tuner offers easy and precise control over your whole system. Finally, you can listen to music the

way it was meant to be heard.

8
Highly accurate CD mechanism for pure signal reading Separate power supply systems eliminate interference More natural sound with Hi-bit conversion
Developed exclusively for use with the RS-A9, this CD mechanism is the best quality There are 7 power supply systems — 3 for the CD mechanism/digital audio Unfortunately, some of the micro-elements are lost with the 16-bit CD
possible. Every detail was considered to ensure that the music signal read from the CD is section and 4 for the control/display/tuner mechanisms. The two system audio signal. Hi-bit conversion re-quantises the 16-bit digital data from a
completely accurate, with virtually no vibration or noise to affect the signal. The quality of groups are separated to eliminate signal interference between the audio CD into 24 bits; consequently, the resolution is enhanced, offering an
the whole system depends on it. The high-precision data pick-up has the capability to system and the control mechanism. As a result, the purity of the digital impressive S/N ratio and a wider dynamic range. This technology serves to
read the utmost subtlest music signals; even after hours of continuous reproduction and signal is preserved. The influence of power fluctuation is minimised, as the restore the lost elements and reproduce a more nuanced, natural sound
high heat, reliability is maintained thanks to a stable hologram technique and laser diode. power systems drive with extreme stability. A large capacity power supply closer to the original performance. The hi-bit system transmits the 24-bit
The chassis is copper-plated to avoid magnetic induction noise. The clamper is made of condenser is equipped with a specially chosen back-up power line, which digital audio signal to digital processors of the RS-A9, so there is absolutely
high-performance damping material (M2052 damping alloy), which prevents degradation further ensures high sound quality. no distortion or deterioration of the waveform — and pure audio quality is
of the digital signal by minimising the pick-up control maintained.
current caused by disc vibration. An enhanced high torque
spindle motor stabilises the sound quality more quickly, if
revolution changes during start-up or external influences Comparison of 24-bit and 16-bit signal transmission
affect playback. All these improvements contribute to a
DAC Output Flow
highly stable and pure digital audio signal with reproduction
of all the fine details. Reduce noise with Display Off mode 16-bit
F = 689.9 Hz Level = -80 dB 24-bit
For those who insist on absolute audio perfection, the Display Off mode is
High-quality CD mechanism available to eliminate the slightest noise created by the OEL display’s power
conversion circuits. In this way, the

Level

Level
audio signal remains pure and »

0
unaffected by noise, and
Specially selected, high-quality acoustic parts unprecedented low distortion is
realised.
Only the highest quality parts were chosen for the RS-D7R, specially selected through Display Off mode Time Time
listening trials. A 70 µm thin copper film substrate — twice as thick as a conventional one Original wave (F = 689.9 Hz Sine Wave)
— results in lower impedance and larger current capacity
The 24-bit signal is transmitted more accurately, closer to the input waveform of the
for all circuit blocks and CD mechanisms. The custom original sound.
condenser also ensures larger capacity, as well as a higher
sound quality. A high-purity OFC (Oxygen-Free Copper)
power cable and a highly efficient and temperature-stable
amorphous choking coil accomplish a full sound quality. Powerful and centralised system control
Acoustic Condensers The RS-D7R facilitates state-of-the-art control over each unit of the entire
system. Firstly, excellent functionality and fully centralised operation of the
digital amplifiers is guaranteed. This ensures utmost control of the music
signal, transmitted from the CD transport to the preamp via the optical
digital transmission system. The unit also enables excellent control of DVD
functions, such as for the XDV-P9-II multi-DVD player. The highest quality
Superb user interface: vivid OEL display and new remote controller sound of DVD is reproduced thanks to the optical digital connection.
Additionally, this unit can control a multi-CD player, TV tuner and DAB tuner,
The RS-D7R features a dazzling white OEL display. Its smart functionality lets you control making a totally integrated system possible.
and confirm operating information at a glance. This sophisticated interface also offers
comprehensive control, quick display response, and high contrast and brightness even in
direct sunlight.
The wireless remote controller has been
designed for maximum functionality and easy
use with the system. The remote slides open to
reveal number keys, and soft keys on the Elegant and high-quality cosmetic design
headunit display appear to aid guidance of all Disc Title Memory display
functions. Thanks to the twin cross control keys, Simple and stylish, the RS-D7R is designed with a dark silver, hairline-finish
the headunit and the remote controller can aluminium fascia and a 5 mm thick acrylic display. The volume knob is of
simultaneously operate different functions: CD satin-finished aluminium with diamond cut effect and other knobs are
tracks can be changed via the cross key of the chromium-plated, contributing to the elegant, sophisticated appearance.
main unit, while the remote controller is used to The bright white OEL display contrasts beautifully with the aluminium front.
adjust the equaliser or network. Tuner display

Optical Digital Reference (ODR) System 9

10
 RS-A9 DIGITAL INTEGRATED AMPLIFIER NEW

With its digital signal processing, equaliser and network control functions, Pioneer's RS-A9 Digital Integrated Amplifier really is a cut above

the rest. These high-performance functions put you in total control of your sound stage. With this smart unit, you can finally create a perfectly

fine-tuned system in your car. An optical digital input allows the amp to connect digitally to the RS-D7R System Control CD Tuner, preserving

the highest quality of the audio signal and forming a pure digital system. The unit also includes 3 digital outputs so that you can easily combine

it with one or more additional RS-A7 Digital Power Amplifiers to drive the speakers with the utmost sonic purity. It is suited especially for

tweeters and midrange speakers, bringing out the clear and smooth tone of delicate strings. This amplifier’s thoroughly engineered design

and specialised parts further ensure high-quality sound and a true digital signal. Now you can enjoy the same class of music you get from

your high-end home audio unit whilst on the move.

4 x 100 W (2 x 300 W) Max.

Powerful 32-bit floating-point SHARC Digital Signal Processors Linear phase and minimum delay
The digital network of the RS-A9 amplifier features 3 ultra-high-performance 32-bit floating-point In the RS-A9 amplifier’s FIR filter, two types of
SHARC digital signal processors (DSP). Three sets of DSP were necessary to implement the response characteristics, linear phase and minimum
independent left-channel signal processing and right-channel signal processing, and the advanced delay, can be chosen.
operation coefficient processing. The capacity of these DSPs is several times that of conventional In linear phase, the delay through the filter is the
ones, which was needed to support the FIR filter. Moreover, through the use of a 32-bit floating-point same at all frequencies, so there is no phase
DSP, the small signal truncating effects of fixed-point DSPs are avoided, thereby significantly distortion. At the crossing point of a crossover
improving the dynamic range and signal-to-noise ratio. network, the exact phase characteristic is acquired L/R independent 4-way digital crossover network
as a direct wave from the speaker, also when time
SHARC Digital Signal Processor alignment is used. This results in a more natural The left/right independent 4-way (low, mid, high, subwoofer)
sound stage in the cabin. digital crossover network is indispensable for the ultimate
Regarding time response characteristics, if the signal tuning of a system. The RS-A9 uses digital controls to obtain the
crosses at low-pass, linear phase results in a pre- ideal settings of the cut-off frequency, slope and phase for each
FIR filter echo and a delay of about 0.2 seconds between the band. Settings can also be manually adjusted while you listen to
FIR filter input and output. the music, and confirmed in real time on the display. The
A FIR filter has been integrated into the RS-A9 amplifier as a signal processing function for the crossover network and With minimum delay, there is no pre-echo or straight built-in crossover network enhances the flexibility of the
graphic equaliser. As a result the digital sound stage controls and equalisation are based on highly accurate processing, to phase delay; however, there is phase rotation and adjustment and allows for the most precise sound tuning.
achieve the ideal listening environment in the cabin. Although a FIR (Finite Impulse Response) filter has various advantages surges at the crossing point of a crossover network.
over a conventional IIR (Infinite Impulse Response) filter, such as excellent phase and time response characteristics, Therefore, linear phase is recommended for systems
it requires a larger DSP capacity — hence, the three 32-bit floating-point SHARC digital signal processors (DSP). FIR filters when there is no crossover on the low frequency.
also have the advantage of more accurate and efficient calculation methods than IIR filters. Minimum delay has the advantage of reduced delay,
This amplifier also uses a sufficient number of FIR taps (memory or filtering capacity), so there is less ripple and more so better synchronisation of images and sound is
stopband attenuation. realised, useful for audio-visual systems. Crossover Network display

Optical Digital Reference (ODR) System 11

 ODR System Chart
RS-A9 RS-A9/RS-A7

DSP DAC
Ach

RS-D7R Optical input

Current feedback
SHARC DSP X 3
SHARC DSP X 3 power amplifier
Discrete
Sampling
24-bit multi-bit current
Rate Current feedback
•FIR
FIRfilter
filter D/A converter feedback type
Converter 96 kHz power amplifier
I/V conversion
•• L/R
L/R independent
independent
12-bit DAC
4-way crossover
4-way crossover
network volume
network
Current feedback
•• L/R
L/Rindependent
independent
GEQ&&PEQ PEQ power amplifier
GEQ High-speed
master
Current feedback
RS-A7 Optical output clock
MID power amplifier

RS-A7 LOW Optical output Bch

RS-A7 SW Optical output

L/R independent 31-band digital graphic equaliser and L/R independent 3-band digital parametric equaliser
The imperfect acoustic conditions of the cabin — irregular shape, narrow space, reflection of
interior materials — can cause peaks and dips in the frequency. Often dips occur in the middle Example of Adjustment using
range while peaks hit around 200 Hz and 2 kHz. The RS-A9 uses a high-performance left/right 31-band Graphic Equaliser
independent 31-band digital graphic equaliser and a left/right independent 3-band digital
parametric equaliser. Both equaliser functions allow precise adjustment of the frequency range
from 20 Hz to 20 kHz (1/3 octave) and sound pressure level by 0.5 dB steps. Two preset and three After Correction
user memory positions are available in order to store favourite settings. The fine adjustments

Response (dB)
realise a flatter frequency and therefore improved acoustic properties for superlative smooth
sound.
Before Correction

20 Hz 20 kHz
Frequency (Hz)

31-band Graphic Equaliser display 3-band Parametric Equaliser display

Time Alignment
The RS-A9's Time Alignment function adjusts the speaker sound
output timing so that the sound from each speaker reaches the
Time Alignment listener at the exact same time. The sound output can be
adjusted in 7.7 mm steps, based on the distance between the Full Balanced Pure Digital System
listener and each speaker unit. This assures clear sound
positioning to create the ideal sound stage. Then, the Position These amplifiers preserve the digital signal received from the RS-D7R control CD tuner with the utmost purity — thanks to the optical digital
Fine Tuning function automatically adjusts the output timing and connection from the CD tuner to the RS-A9, and then if connected, to one or more RS-A7 units.
level from each speaker based on the number and the position If the amplifier is used in bridge connection, it will become a full balanced pure digital system. When the D/A converter of one channel operates
of the people in the cabin. You can have your sound exactly the in reverse, the circuit composition is perfectly balanced from digital output to speaker output. Common mode noise is sharply diminished and high
Time Alignment display way you like it, whatever your positioning. S/N and high dynamic range can be realised.

12
RS-A7 DIGITAL POWER AMPLIFIER NEW

The RS-A7 is a true high-performance Digital Power Amplifier. Using Class AB amplification, it’s huge

on power and on high-quality sound. You’ll just love what you hear. The amplifier can be digitally

connected to the RS-A9 Digital Integrated Amplifier using its optical digital inputs, to ensure that you

maintain the utmost quality of the audio signal from the RS-D7R System Control CD Tuner. With no

conversion to analogue necessary, you don’t lose any of the digital signal from the original music

source, so the real expression of the music can be reproduced precisely. Its high-performance circuit

allows for a stable power supply. You’ll be blown away by its enormous capacity for a subwoofer or

low channel output. It’s sound at full-blast. And with loads of cool features and new technologies, this

amplifier is the perfect answer to pure listening pleasure.

4 x 100 W (2 x 300 W) Max.

12-bit DAC volume

Although strict listening tests and measurements were carried out on many types of high-grade electronic VR IC, few gave a
24-bit multi-bit D/A converters satisfactory performance and sufficient tone quality. With the RS-A9 and RS-A7, a carefully selected external operational amplifier
is used for the buffer amplifier — a wide use DAC —, which meets Pioneer’s high standard of tone quality and performance. The
High-performance 24-bit multi-bit D/A converters from the Burr-Brown Corporation are used for the 12-bit DAC volume has 60 steps for the utmost convenience.
96 kHz sampling frequency. Arranged in Sign-Magnitude conversion mode, they basically eliminate
zero-cross distortion and offer low distortion and wide dynamic range. Combine this with the 8 times
oversampling digital filter and the result is unparalleled sonic excellence.
High sampling frequency: Sampling Rate Converter
24-bit multi-bit D/A converter A built-in sampling rate converter (SRC) circuit converts the 44.1 kHz digital output of a CD to 96 kHz. The
sound expression is expanded, and muddy sound typical of an operational amplifier is eliminated. Moreover,
the digital output signal of the sampling rate converter is reclocked by a very precise master clock.
L/R independent power supply
A separate DC-DC converter, equivalent to a conventional 4-channel amplifier, has been Sampling Rate Converter
implemented for both the right and left channels in the RS-A9 and RS-A7. The power
supply capacity was doubled as a result. Moreover, the direct construction design High-speed master clock
minimises the distance between the power supply circuit and the amplifier circuit, and the
parts are arranged to eliminate signal interference and power supply noise between Not only is it important that the data is read precisely, but also that the time axis is accurate. Both are essential to reproduce the
circuits. In this way, a more direct and extremely pure signal route is realised, for a more exact waveform. The RS-A9 and RS-A7 use a high-precision master clock circuit, which eliminates the influence of jitter as much
clean and fresh sound. as possible. The use of a crystal oscillator and elaborate clock adjustment by hand contribute to the highly accurate master clock
signal. Compared to conventional circuits, jitter is reduced by 50 %. Distortion of the time axis is therefore completely eliminated
L/R independent power supply to reproduce refined and subtle sound, clear and crisp as you've never heard before.

Current feedback type power amplifier with discrete I/V conversion circuit High-quality sound design
In order to realise a high through rate, wide range, and low distortion, current feedback type power amplifiers were Only the highest quality parts were chosen for these amplifiers. And audiophiles will truly appreciate the results. The power
adopted for the RS-A9 and RS-A7. Music can therefore be reproduced with a higher resolution and higher speed. These amplifier is firmly supported by a sub heat sink and a copper-plated steel plate. There is virtually no current distortion or vibration
amplifiers also feature an I/V conversion circuit with a discrete composition for more flexibility. This type of circuit was affecting the chassis. The copper plate is also shielded to reduce the influence of radiation. The newly designed heat sink is very
needed to transform the stair-shape current waveform of a DAC output into voltage, and to achieve a short settling time efficient at dissipating heat flow; operation is very stable even at full power, so there is very little resonance. A black coating was
and a gentle rectangular wave response. The amplifier circuit was designed with the aid of computer simulation and used for the PCB to eliminate the effects of noise caused by dispersed light from the chassis. The power supply uses non-magnetic
fine-tuned by a series of listening tests, for the optimal tone quality. brass screws and washers for the finishing touch.

Optical Digital Reference (ODR) System 13

High-end RS Speakers

A new standard of high-quality audio

Pioneer doesn’t compromise on quality, why should you? In the pursuit of the ideal sound — natural and accurate reproduction of the input

sound signal —, Pioneer went back to the very basics of speaker design. For four years, Pioneer’s top engineers analysed hundreds of different

materials and structures and considered every detail. Their aim was to enhance transient response, produce wide-ranging and linear sound

over a broad spectrum and eliminate all unnecessary vibration. The result was well worth waiting for. Every speaker is crafted by skilled hands

to an accuracy of 1/100 mm, far exceeding the standards of conventional speakers. These luxurious units produce ‘genuine’ high-quality sound.

Reproduction of music is so precise that you can hear not only the emotions of the music but that of the musicians too.

This really is the birth of a new era in speaker design.

Ion-plated titanium dual arc-ring Brass equaliser Spherical zinc die-cast frame
diaphragm

TS-T01RS 1-3/8” (3.5 cm) SUPER WIDE-RANGE TWEETER NEW

This super wide-range tweeter is ready for next-generation audio, such as DVD-Audio. Offering an extended wide range, it ensures the true reproduction of high frequencies, as well as

replicating the exact harmonic elements of instruments. It not only guarantees accurate high-quality audio but imbues every sound with a rich texture too. This has been achieved by the

design of a new, patent-pending asymmetric dual arc-ring diaphragm, 35 mm in diameter. Made of lightweight and high-rigid titanium formed into a 20 µm thin foil, this diaphragm is

responsible for the crystal-clear reproduction of the audible spectrum — up to 48 kHz! The diaphragm’s surface is coated with processed ion plating to eliminate distortion.

The innovative brass equaliser with mirror-finish surface has been developed and precisely machined to provide a virtually distortion-free sound reproduction. Every component of this

outstanding tweeter is made from low-resonance materials: the highly rigid zinc die-cast frame, brass screws and a newly developed, patent-pending resonance-resistant tungsten holder.

120 W Max.

14
 TS-S01RS 3” (7.7 cm) MIDRANGE NEW

This midrange speaker is part of a perfect multi-system. After thorough analysis,

superior technology was developed specifically for this speaker to achieve the most

natural and accurate sound reproduction. The pulp-based composite cone with

reinforcing ribs is complemented by a titanium centre cap. Coated with DLC (Diamond

Like Carbon), the cap surface is harder, which improves high-range frequency

reproduction. A corrugated edge was also specially created to support the cone and

absorb vibration more efficiently. With its rigid zinc die-cast back chamber, tweeters

and mid-bass speakers can be connected more smoothly, no matter what the

installation conditions, and solid midrange sounds are reproduced. When the chamber

is not used, wide-range sound comparable to a mid-bass speaker can be achieved. This

speaker features an ultra-strong neodymium magnet; a heavy zinc full-basket frame

supports the magnetic circuit for

receiving maximum power from the

source. Its unique structure and material

enable high rigidity, low resonance and

no influence on cone movement. The

patent-pending resonance-resistant

tungsten holder is jointed to the frame at

5 points to eliminate any resonance.

60 W Max.
DLC (Diamond Like Carbon) coated Zinc die-cast back chamber Gold-plated binding post-screw
titanium centre cap terminals

High-end RS Speakers 15
TS-M01RS 6-3/4” (17 cm) MID-BASS DRIVER
NEW
This mid-bass driver has been skilfully crafted to extend the wide-range comparable to that of full-range

speakers, yet with faithful reproduction of the overall sound spectrum. Numerous trials and meticulous

selection of materials went into creating the pulp-based composite cone, and the resulting sound quality is

ideal. Reinforced with ribs, the cone enhances the highest resonant frequency and eliminates all distortion.

The centre cap is constructed from another specially developed pulp material, improving sound properties

at the upper range and suppressing resonance from the magnetic circuit. The

magnetic circuit itself uses an ultra-strong neodymium magnet and is

supported by a heavy zinc full-basket frame, which reduces unnecessary

reaction and resonance. Finally, a patent-pending resonance-resistant

tungsten holder eliminates resonance between the damper and the frame.

120 W Max.

Point support

Pulp-based composite cone with Full-basket structure 5-spoke zinc Resonance-resistant structure
reinforced ribs die-cast frame tungsten damper holder
with 5 points support

NEW
UD-N01RS 2-WAY PASSIVE CROSSOVER NETWORK

Designed exclusively for the TS-T01RS and TS-M01RS in the combination of PRS series, this crossover network comprises first-rate acoustic

elements including a large hollow coil and a high-quality condenser. The 70 µm copper film substrate decreases impedance, which reduces

noise and increases current capacity. Resonance has been cleverly eliminated too by mixing high-rigid tungsten into the case material.

16
TS-W01RS 10” (25 cm) SUBWOOFER NEW

Enjoy the clean reproduction of sounds even at the very low frequencies with this high-grade

subwoofer. Its cone, made of a lightweight, high-rigid pulp composite with carefully selected

materials, combines with the centre cap to offer unprecedented high-quality reproduction of sounds

as low as 50 Hz and even lower. The specially designed butyl rubber edge guarantees superb and

accurate vibration response; a large voice coil provides highly efficient vibration of the whole cone

without flexure; and the 12 large-sized ultra-strong neodymium magnets in the magnetic circuit

create powerful and precise motion. By maximising the opening at the

back, back pressure balance is easily controlled so that even the

heaviest of basses can be reproduced exactly. Its high-rigid aluminium

die-cast frame offers high damping properties. All this comes in an

attractive, ultra-thin package that is extremely easy to install.

300 W Max.

Centre cap integrated pulp-based Opening at the back side Shallow design aluminium die-cast
composite cone frame / Ø140 mm large-sized
heat-resistant voice coil

High-end RS Speakers 17
Pioneer Reference Series (PRS)

DEX-P90RS COMPONENT CD RDS TUNER NEW

When prestigious design merges with technical élan, the DEX-P90RS emerges on top. The

striking-white OEL display and aluminium front make a certain style statement on the outside,

while on the inside, 16-bit digital CD data is directly transferred by top-of-the-line 24-bit multi-bit

D/A converters, with minimum distortion and the natural sound expression intact. You will

especially appreciate the high-quality parts, ultra-precise mechanisms and high-performance

construction. Pair up optically with the DEQ-P90 for an unrivalled audio system, with DSP and

network functions. Three RCA pre-outs allow you to expand your system further. This brilliant

component will give you an unforgettable listening experience.

NEW DEQ-P90 DIGITAL PREAMP/EQUALISER

Designed to enhance the DEX-P90RS to perfection with every sonic detail, this digital signal processor balances incoming and outgoing signals to match the interior acoustics of

your particular automobile. With complete control of the signal processing and networking, you can optimise the parametric equaliser and Sound Field Control to create your own

preferred sound field.

PRS AMPLIFIERS
Engineered with excellence, PRS amps are designed to deliver pure and powerful distortion-free sound. They’re loaded with audiophile grade components and

high-performance technologies — like separate left and right channels, independent left and right power supplies and gain control. This means that these amps

operate with maximum separation and control, and minimum distortion. In short, superb sound quality. These are the ultimate amps to drive your PRS system

with utmost intensity and clarity.

NEW
PRS-A700 4-CHANNEL BRIDGEABLE POWER AMPLIFIER
4 x 100 W (2 x 300 W) Max.

PRS-A500 2-CHANNEL BRIDGEABLE POWER AMPLIFIER

2 x 200 W (1 x 600 W) Max.

18
TS-T3PRS 1-1/4” (3 cm) FLUSH MOUNT SOFT DOME TWEETER

With an extended low-frequency response, this tweeter improves the overall imaging of your audio system. A large-sized

Soft Dome diaphragm ensures higher sound imaging without harshness and an ultra-strong Neodymium magnet makes

5
Ø7
0°

120
transient response faster and more precise. The carefully tuned Sealed Performance Chamber extends the crossover

12

Ø87
frequency.
15
3 — Ø4.3 Holes 30

200 W Max.

TS-M7PRS 6-3/4” (17 cm) MID-BASS DRIVER

This Mid-Bass Driver was designed to reproduce real strings and vocals with less distortion. Thanks to the KEVLAR® brand 45
° 45
° 58
Ø1

Fibre Composite Cone and the Butyl Rubber Symmetrical Balanced Surround, you can expect smooth, accurate sound from

Ø100
Ø170

Ø143
mid-bass to upper midrange frequencies.
8.3
4 — 4.5 x 6.5 Holes 67.3

200 W Max.

TS-W12PRS 12” (30 cm) DUAL VOICE COIL C-TYPE SUBWOOFER

This powerful subwoofer is equipped with a Voice Coil Cooling System (VCCS) and a giant magnetic circuit that keep the 45°
8 — Ø6.5 Holes

02

°
Ø3

45
subwoofer cool, so that the sound stays natural. There's also a dual-layer long voice coil (2 x 4 ohm) which, combined with

22.5°

Ø322

Ø278
the extremely light KEVLAR® brand Fibre Composite Cone, results in a very strong moving force.
19 133
152

1200 W Max.

UD-N2PRS 2-WAY PASSIVE CROSSOVER NETWORK

95 33.3
Pioneer has designed a 2-way, passive crossover network especially for use with the TS-T3PRS and TS-M7PRS. With its

discriminating EMI (Electromagnetic Interference) shielding chassis, this network provides simple, clear and precise sound

142
solutions.

DuPont and/or DU PONT-TORAY CO., LTD. produce KEVLAR® brand fiber. DuPontTM and KEVLAR® are trademarks and registered trademarks of DuPont or its affiliates and are used under license by Pioneer.

Pioneer Reference Series (PRS) 19

 Features and Specifications

RS-D7R SYSTEM CONTROL CD RDS TUNER

DEQ-P90 DIGITAL PREAMP/EQUALISER
Tuner • Last Position Memory • AUX-In (with optional CD-RB20)
• 31-band L/R independent graphic equaliser Subwoofer: LPF: 25 – 250 Hz; • Optical digital input for
• RDS (PI, PS, AF, TP/TA), PTY (Search and • Disc Title Memory • Slide-type Remote Control
(1/3 oct) with level control (0.5 step, ±12 dB) HPF: 20 – 100 Hz connection with DEX-P90RS
Alarm), News Interrupt feature and Radio Text • CD Text • Digital Clock
• 4-way independent L/R crossover network - Slope: 0*, -6, -12, -18, -24, -30, • High Voltage output
• High-speed PLL ARC 5 synthesiser tuner with • CD-R/CD-RW playback with Skip Play • OEL white-colour display illumination
(High, Mid, Low, Subwoofer) -36 dB/oct • Gold-plated 8-channel RCA output
BSA (Best TP Station Auto Search), BSM (Best • Display Off mode
- Crossover frequency: 20 Hz — 20 kHz - Phase: Normal/Reverse (High/Mid/Low/Subwoofer)
Stations Memory) and PNS (Pulse Noise Audio • Rotary volume
(1/3 oct) - Level: +10 – -24 dB • Parametric Bass/Treble
Suppressor) • IP-Bus input/output • High-quality auto-flap mechanism (motor
High: LPF: 8 – 20 kHz; - Mute • Electronic Volume
• 24 station presets • Optical input/output driven)
HPF: 1.6 – 20 kHz • Time Alignment for clear sound focus • Gold-plated power screw terminals
• Removable front panel with safety warning
Mid: LPF: 2 – 20 kHz; • Listening Position selector (FR/FL/F/OFF) • Copper-plated chassis
CD Player General beep
HPF: 200 Hz – 10 kHz • 24-bit Burr-Brown D/A converters • Installation kit
• High-quality CD mechanism with • Full audio control of RS-A9 Digital Integrated • Cellular telephone auto muting
Low: LPF: 250 Hz – 10 kHz; • High-performance 8 times oversampling
copper-plated chassis Amplifier • Flexible angle installation (0 — 60˚)
HPF: 25 – 250 Hz digital filter * Not available for HPF of high mode.
• Hi-bit conversion • Multi-CD Control with Disc Title Memory, List • OFC (Oxygen-Free Copper) power cables
• Digital Direct Search and CD Text • Copper-plated chassis
• Fast forward/reverse • Source TV Control • Aluminium finished front panel
• Track Search/Scan/Repeat • DAB Tuner Control
• Track/Manual search • Source DVD Control
• Random Play • External Unit Control via IP-Bus (2 units)

RS-A9 DIGITAL INTEGRATED AMPLIFIER

DSP/Network/Equaliser features Mid: LPF: 2 – 20 kHz; • Up sampling (44.1 kHz > 96 kHz) by SRC AMPLIFIERS FEATURES RS-A9 RS-A7 PRS-A700 PRS-A500
(See amplifier charts at right and next page HPF: 160 Hz – 10 kHz (Sampling Rate Converter) Circuit type Current Feedback/ Current Feedback/ Current Feedback/ Current Feedback/
for RS-A9 amplifier features and Low: LPF: 250 Hz – 10 kHz; • Optical input for digital connection with Class AB Class AB Class AB Class AB
specifications) HPF: 25 – 250 Hz RS-D7R System Control CD RDS Tuner Max. output power 4 x 100 W 4 x 100 W 4 x 100 W 2 x 200 W
• 3 ultra-high-performance 32-bit floating-point Subwoofer: LPF: 40 – 250 Hz; • 3 Optical outputs (Mid/Low/Subwoofer) for 2 x 300 W 2 x 300 W 2 x 300 W 1 x 600 W
SHARC Digital Signal Processors (DSP) HPF: 20 – 100 Hz digital connection with RS-A7 Digital Power LPF/HPF Network (-12 dB/oct) Integrated DSP 40 — 120 Hz 40 — 120 Hz
• FIR Filter - Slope: 0*, -6, -12, -18, -24, -36, -48, Amplifiers Input level/gain control (L/R INDEPENDENT) • •
• Linear phase and minimum delay phase -72 dB/oct • Parametric Bass/Treble PWM (L/R INDEPENDENT) regulated MOSFET • •
• L/R independent power supply and amplifier - Phase: Normal/Reverse - Bass: 63, 100, 160, 250 Hz (±12 dB) power supply
circuit - Level: High/Mid/Low: 0 – -24 dB (0.5 dB - Treble: 4, 6.3, 10, 12.5 kHz (±12 dB) High voltage input capability • •
• 31-band L/R independent graphic equaliser step); Subwoofer: +10 – -24 dB (0.5 dB step) • Electronic (DAC) Volume (200 mV — 6.5 V)
(1/3 oct) with level control (0.5 step, ±12 dB) - Mute • Non-magnetic power terminal and speaker Load impedance capability • (2 — 8 Ω) • (2 — 8 Ω) • (2— 8 Ω) • (2— 8 Ω)
• 3-band L/R independent parametric equaliser • Time Alignment for clear sound focus terminal 24-bit multi-bit Burr-Brown D/A converter • •
(1/3 oct) with level control (0.5 step, ±12 dB) • Listening Position selector (FR/FL/F/OFF) • Copper-plated chassis 8x oversampling digital filter • (96 kHz input) • (96 kHz input)
• 4-way independent L/R crossover network - Time/distance: 0 – 192.5 cm (0.77 cm step)
Optical digital input/output 1/3 2/–
(High, Mid, Low, Subwoofer) - Level: 0 – -30 dB (0.5 dB step) * Not available for HPF of high mode.
IP-Bus input/output 1/1 1/1
- Crossover frequency: 20 Hz — 20 kHz • 24-bit multi-bit Burr-Brown D/A converters
Analogue SP 4 ch (HIGH, MID/LOW)/ 4 ch (MID/LOW/SW)
(1/3 oct) • High-performance 8 times oversampling
2 ch Bridge (HIGH) 2 ch Bridge
High: LPF: 8 – 20 kHz; digital filter
DAC volume • (60 step) • (60 step)
HPF: 1.6 – 20 kHz • Ultra precise sound master clock circuit
TA Volume • •
Gold-plated RCA input • •
Gold-plated screw-type speaker terminals • non-magnetic type • non-magnetic type • •
Large gold-plated power/ground terminals • non-magnetic type • non-magnetic type • •
DEX-P90RS COMPONENT CD RDS TUNER
(screw type)
Tuner • Disc Title Memory • Source TV Control High-performance balanced isolator circuit • •
• RDS (PI, PS, AF, TP/TA), PTY (Search and • CD Text • DAB Tuner Control MOSFET output section • •
Alarm), News Interrupt feature and Radio Text • CD-R/CD-RW playback with Skip Play • Source DVD Control Sampling frequency 44.1 kHz 44.1 kHz
• High-speed PLL ARC 5 synthesiser tuner with • External Unit Control via IP-Bus (2 units) Mode selector Address: Master Only Address: 1 – 4
BSA (Best TP Station Auto Search), BSM (Best Audio • AUX-In (with optional CD-RB20) Channel Select Mode: 3 position
Stations Memory) and PNS (Pulse Noise • Separate Bass/Treble • Slide-type Remote Control (H-H/H-M/H/L) (MID/LOW/SW)
Suppressor) • Source Level Adjuster • Digital Clock Power indicator • • • •
• 24 station presets • Fader • OEL white display illumination Installation kit • •
• 3 Gold-plated RCA pre-outs • Display Off mode
CD Player (Front + Rear + Non Fading) • Auto-flap mechanism
• 24-bit D/A converter with 8 times • High Voltage output • Removable front panel with safety warning
oversampling digital filter • IP-Bus input/output beep
• High-quality CD mechanism • Optical digital input/output • Cellular telephone auto muting
• Hi-bit conversion • Flexible angle installation (0 — 60˚)
• Fast forward/reverse General • Copper-plated chassis
• Track Search/Scan/Repeat • Full audio control of DEQ-P90 Digital • Aluminium finished front panel
• Track/Manual search Preamp/Equaliser
• Random Play • Multi-CD Control with Disc Title Memory and
• Last Position Memory CD Text

20
 AMPLIFIERS SPECIFICATIONS RS-A9 RS-A7 PRS-A700 PRS-A500 TS-W01RS 25 cm SUBWOOFER
DIN output power 4 x 70 W or 2 x 140 W or • Centre cap integrated pulp-based composite • Gold-plated binding post-screw terminals • 20 – 3,000 Hz, 86 dB (1 W/1 m)
(DIN 45324, +B = 14.4 V) 2 x 210 W (4 Ω) 1 x 500 W (4 Ω) cone • Shallow design • Impedance: 4 Ω
Continuous output power (RMS) • Tapered thickness butyl rubber surround • Recommended enclosure volumes: • Unit weight: 6.6 kg
watts 14.4 V (20 Hz — 20 kHz/4 Ω) 4 x 50 W (0.02 %) 4 x 50 W (0.02 %) 4 x 50 W (0.08 %) 2 x 100 W (0.08 %) • 12 large neodymium magnets 14 – 28 Litre • Dimensions: Ø276 x 94 (D) mm
(20 Hz — 20 kHz/2 Ω) 4 x 75 W (0.02 %) 4 x 75 W (0.02 %) 4 x 75 W (0.8 %) 2 x 150 W (0.8 %) • Ø140 mm large-sized heat-resistant voice coil • Maximum input power: 300 W • Cutout hole: Ø238 mm
(Bridged 4 Ω) 2 x 150 W 2 x 150 W 2 x 150 W 1 x 300 W • Aluminium die-cast frame • Nominal input power: 150 W • Mounting depth: 75 mm
Frequency Response (Hz) (+0 dB, -1 dB) 10 — 100,000 10 — 100,000 10 — 80,000 10 — 80,000
Distortion (%) ‹ 0.002 (1 kHz/4 Ω) ‹ 0.002 (1 kHz/4 Ω) 0.003 (1 kHz/4 Ω) 0.003 (1 kHz/4 Ω)
S/N Ratio (dB) 105 105 › 108 › 108 UD-N01RS 2-WAY PASSIVE CROSSOVER NETWORK
Separation (100 Hz — 10 kHz) (dB) › 80 › 80 › 70 › 70
• High-quality condenser Low Pass Filter (LPF): -12 dB/oct • Tweeter attenuation: 0 dB/-3 dB
Input Level Control 200 mV — 6.5 V 200 mV — 6.5 V
• Large hollow coil High Pass Filter (HPF): -12 dB/oct • Unit weight: 0.8 kg
Max. Current consumption (A/4 Ω) 31.0 31.0 28.0 25.0
• 70 µm thick copper film substrate • Load impedance • Dimensions (W x H x D): 182 x 43 x 106 mm
Chassis Size (W x H x D mm) 330 x 71 x 585 330 x 71 x 585 300 x 63 x 330 300 x 63 x 330
• High-rigid tungsten-blend case material Mid-Bass (TS-M01RS): 4 Ω
Unit Weight (kg) 13.0 13.0 5.8 5.8
• Crossover Frequency: 5,000 Hz Tweeter (TS-T01RS): 6 Ω

Each RS speaker is individually handcrafted by skilled speaker professionals, so it is necessary to measure each speaker’s performance one by one.
Therefore, you will find the exact parameters, specific to each individual speaker, enclosed in the speaker package. RS speakers are created with the
highest quality standards and make it possible to achieve true sound perfection.

TS-T01RS 3.5 cm SUPER WIDE-RANGE TWEETER TS-T3PRS 3 cm FLUSH MOUNT SOFT DOME TWEETER

• Ø35 mm ion-plated titanium dual arc-ring • Resonance-resistant structure tungsten • Unit weight: 0.6 kg • Ø30 mm polyester fibre diaphragm • Maximum input power: 200 W • Unit weight: 0.3 kg
diaphragm* holder* • Dimensions: Ø68 x 64 (D) mm • Large neodymium magnet • Nominal input power: 60 W • Dimensions: Ø87 x 45 (D) mm
• Large neodymium magnet • Gold-plated binding post-screw terminals • Cutout hole: Ø72 mm (with aluminium fitting • Aluminium die-cast flange • 1,000 – 30,000 Hz, 92 dB (1 W/1 m) • Cutout hole: Ø62 mm
• Heat-resistant aluminium ribbon voice coil • Maximum input power: 120 W bracket) • Aluminium die-cast back chamber • Recommended crossover frequency: 3,000 Hz • Mounting depth: 30 mm
• Brass equaliser • Nominal input power: 50 W • Mounting depth: 46 mm (with aluminium • Removable metal mesh protector • Impedance: 8 Ω
• Spherical zinc die-cast frame • 1,200 – 48,000 Hz, 95 dB (1 W/1 m) fitting bracket)
• Impedance: 6 Ω • Aluminium fitting brackets included
TS-M7PRS 17 cm MID-BASS DRIVER
• KEVLAR® brand fibre composite cone • Ready for small enclosure application • Impedance: 4 Ω
TS-S01RS 7.7 cm MIDRANGE • Symmetrically balanced butyl rubber (e.g. kick panel) Recommended enclosure • Unit weight: 1.5 kg
surround volume: 5 Litres • Dimensions: Ø170 x 76 (D) mm
• Pulp-based composite cone with • Resonance-resistant structure tungsten • Unit weight: 0.5 kg • Aluminium die-cast frame • Maximum input power: 200 W • Cutout hole: Ø143 mm
reinforced ribs damper holder with 5 points support* • Dimensions: Ø90 x 42 (D) mm1 / • Gold-plated binding post-screw terminals • Nominal input power: 60 W • Mounting depth: 67 mm
• DLC (Diamond Like Carbon) coated titanium • Zinc die-cast back chamber Ø90 x 67 (D) mm2 • 28 – 10,000 Hz, 91 dB (1 W/1 m)
centre cap • Gold-plated binding post-screw terminals • Cutout hole: Ø72.5 mm1 / Ø77 mm2
• Corrugated design cloth surround with • Maximum input power: 50 W1 / • Mounting depth: 37.5 mm1 / 60 mm2
damping material 60 W2 (fc = 800 Hz, -12 dB)
• Large neodymium magnet • Nominal input power: 15 W TS-W12PRS 30 cm DUAL VOICE COIL C-TYPE SUBWOOFER
• Heat-resistant copper ribbon voice coil • 70 – 24,000 Hz1 / 160 – 24,000 Hz2, 1Unit alone
• Full-basket structure 5-spoke zinc die-cast 86 dB (1 W/1 m) 2With back chamber • KEVLAR® brand fibre composite cone • 4-spoke aluminium die-cast frame • 15 – 2,000 Hz, 92 dB (1 W/1 m)
• Dual-layer rolled urethane surround • Gold-plated binding post-screw terminals • Unit weight: 11.9 kg
frame • Impedance: 4 Ω
• Dual 4 Ω voice coil design (2 or 8 Ω) • Recommended enclosure volumes: • Dimensions: Ø322 x 152 (D) mm
• 2 Ω rated (parallel wired) 28 Litre ±10 % • Cutout hole: Ø278 mm
• 8 Ω rated (series wired) • Maximum input power: 1200 W • Mounting depth: 133 mm
• VCCS (Voice Coil Cooling System) • Nominal input power: 300 W
TS-M01RS 17 cm MID-BASS DRIVER
• Pulp-based composite cone with • Full-basket structure 5-spoke zinc • 35 – 11,000 Hz, 89 dB (1 W/1 m)
reinforced ribs die-cast frame • Impedance: 4 Ω
• Corrugated design Conex surround with new • Resonance-resistant structure tungsten • Unit weight: 1.6 kg
UD-N2PRS 2-WAY PASSIVE CROSSOVER NETWORK
damping material damper holder with 5 points support* • Dimensions: Ø174 x 75 (D) mm • EMI (Electromagnetic Interference) shielding • Load impedance • Dimensions (W x H x D): 142 x 33 x 95 mm
• Large neodymium magnet • Gold-plated binding post-screw terminals • Cutout hole: Ø151 mm chassis Midrange (TS-M7PRS): 4 Ω
• Heat-resistant copper ribbon voice coil • Maximum input power: 120 W • Mounting depth: 69 mm • Selected quality devices Tweeter (TS-T3PRS): 8 Ω
• Nominal input power: 50 W • Crossover Frequency: 3,000 Hz • Tweeter attenuation: 0 dB/-3 dB
Low Pass Filter (LPF): -12 dB/oct • Nominal input power: 60 W
High Pass Filter (HPF): -12 dB/oct • Unit weight: 0.4 kg
* Patent pending

Disclaimer: Features and specifications of the products described or illustrated in this catalogue are correct at the time of printing but could change as production changes might occur. This catalogue may contain typographical errors and the colours of the depicted products may deviate slightly from reality.
Consult your Pioneer dealer to ensure that actual features and specifications match your requirements. This catalogue may contain references to products that may or will not be available in your country.

Features and Specifications 21

 Recommended System Set-ups

You can design various systems with the ODR components, high-end RS speakers and/or PRS units, from a simple 2-way system to a full-fledged 4-way system. The ODR Full Balanced System (RS-A9 and three RS-A7’s) is the perfect balanced system from
the digital output in the circuit of the amplifier, delivering the utmost high-quality sound.

ODR & RS — 2-way System ODR & RS — 4-way System ODR & RS — 4-way Full Balanced System

RS-A9 4ch output HIGH-Lch RS-A9 4ch output

RS-D7R RS-D7R HIGH-Lch RS-A9 2ch output
RS-D7R
TS-T01RS HIGH-Lch
TS-T01RS
HIGH-Rch
HIGH-Rch TS-T01RS
HIGH-Rch
LOW-Lch
MID-Lch
TS-M01RS
TS-S01RS
RS-A7 2ch output
LOW-Rch MID-Rch
MID-Lch
TS-S01RS
MID-Rch

ODR & RS — 3-way System RS-A7 4ch output LOW-Lch

TS-M01RS RS-A7 2ch output
LOW-Rch LOW-Lch

RS-A9 4ch output TS-M01RS

RS-D7R HIGH-Lch
LOW-Rch
TS-T01RS
HIGH-Rch
SW-Lch
TS-W01RS RS-A7 2ch output
LOW-Lch
SW-Lch
SW-Rch
TS-M01RS
TS-W01RS
LOW-Rch
SW-Rch

RS-A7 2ch output

SW-Lch
TS-W01RS

SW-Rch

Optical line IP-Bus line Speaker line RCA line

PRS & RS — 3-way System PRS — 3-way System

4ch UD-N01RS DEQ-P90 PRS-A700

DEQ-P90 PRS-A700 output
DEX-P90RS DEX-P90RS 4ch output HIGH-Lch
HIGH-Lch
TS-T3PRS
TS-T01RS
HIGH-Rch HIGH-Rch

LOW-Lch LOW-Lch
TS-M01RS TS-M7PRS
LOW-Rch LOW-Rch

PRS-A500
SW-Lch 2ch output SW-Lch
TS-W01RS TS-W12PRS

SW-Rch SW-Rch

Published by: PIONEER EUROPE N.V.

Haven 1087, Keetberglaan 1, B-9120 Melsele, Tel.: + 32 (0)3 570 05 11
Copyright 2005 by Pioneer Europe N.V.
All rights reserved.

22