Declaration of Compliance,

General Food Contact Regulations

Business Unit Hygienic Fluid Handling
Declaration of compliance (DoC) covering Product Contact Parts (PCP) intended to come into contact
with food (hereinafter referred to as Product Contact Parts (PCP)).

We, Alfa Laval Kolding A/S on behalf of BU Hygienic Fluid Handling products, hereby confirm that all
products listed in Appendix A & B and its related spare parts meets the relevant requirements as laid
down in following regulations/directives/guidelines/standards:
The spare parts listed in Appendix C meets the relevant requirements as laid down in following
regulations/directives/guidelines/standards when the products using the parts where purchased.

(EC) No. 1935/2004

• Products listed in appendix A and its related spare parts complies with the European Regulation
(EC) No. 1935/2004 “Materials and articles intended for contact with food” as amended.

BEK nr. 681 Bekendtgørelse om fødevarekontaktmaterialer og om straffe- bestemmelser for

overtrædelse af relaterede EU-retsakter
• Products listed in appendix A and its related spare parts complies with the Danish Regulation
BEK nr 681 as amended.

Good Manufacturing Practice (GMP) (EC) No. 2023/2006

• Products listed in appendix A and its related spare parts are manufactured in accordance with
the requirements of Commission Regulation (EC) no. 2023/2006 on Good Manufacturing
Practice for materials and articles intended to come into contact with food.

Commission Regulation (EU) No. 10/2011

• PCP made of plastic material comply with the Commission Regulation (EU) No. 10/2011 “Plastic
materials and articles intended to come into contact with food” as amended 1.

Council Directive 84/500/EEC

• PCP of silicon carbide and zirconia materials comply with the Council Directive 84/500/EEC
“Ceramic articles intended to come into contact with foodstuff” as amended.

1
Overall and specific migration will not exceed the limits set out in (EU) No 10/2011 if the PCP made of plastic material is used
for its intended purposes under conditions specified in the product information. The plastic material PCP are made of may
Created from ALCS Template TD00000074

contain substances which are regulated with a Specific Migration Limit (SML) in Commission Regulation (EU) No 10/2011. The
identity of these substances can only be disclosed for testing purposes under a signed non-disclosure agreement
.

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 1/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 U.S. Food & Drug Administration (FDA)
• Non-metallic PCP complies with following relevant subsections of the present US regulation
FDA CFR 21:
o Rubber (BUNA, EPDM, NBR, HNBR, NR, Silicone Q, FPM, FFKM, Viton)
▪ § 177.2600
▪ Kalrez: § 177.2400
o Plastics
▪ PEEK: § 177.2415
▪ PE, PP: § 177.1520
▪ PTFE/FEP/PFA/TFM: § 177.1550
▪ POM: § 177.2480
▪ PVDF: § 177.2510
▪ PEEK w. PTFE: § 177.2415
▪ Colorant f. PEEK w. PTFE: § 178.3297

o Silicon carbide, zirconia and resin impregnated carbon graphite

▪ The regulatory status has been properly assessed in accordance with the
United States code of Federal Regulations title 21.

ADI (Animal Derivative Ingredient) Declaration (BSE/TSE)

• PCP does not contain and is not derived from any substances of animal origin or the
requirements as specified in the latest revision of 2011/C 73/01 (EMA/410/01) are met

Relevant 3-A Sanitary Standard

• Products listed in Appendix B and spare parts listed in appendix C complies with relevant 3A
Sanitary Standards.
Non-metallic PCP complies with the requirements of:
o Rubber
▪ 3A Sanitary Standard for Multiple-Use Rubber and Rubber-Like Materials
Used as Product Contact Surfaces in Dairy Equipment, Number 18-3,
Class II.
o Plastics
▪ 3A Sanitary Standard for multiple-use plastic materials No 20-23.

Find Type or types of food, time and temperature for which products are intended to be in contact, in
Catalogues (alfalaval.com).

2023.06.20
[Date (YYYY,MM.DD)]

This document is signed electronically by

Lars Kruse Andersen, Global Product Quality Manager HFH
[Name, Title of company representative]

Alfa Laval Kolding, Albuen 31, 6000 Kolding, Denmark

[Company address]
Created from ALCS Template TD00000074

Validity of this statement:1 year from stated version date or until superseded.

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 2/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Appendix A
PRODUCT DESCRIPTION/DESIGNATION:

Valves
• Unique MP,
• Unique TO,
• Aseptic Mixproof
• SMP-BC, BCA, SC, EC, SF, TO
Unique PMO, Unique PMO Plus,
• Unique PMO Plus CP, & Unique PMO-F
• Unique PMO CURD & Unique PMO CURD CP
• PMOHTCP & PMOVTCP
• Unique Sampling Valve Type P,
• Unique Sampling Valve Type M,
• SB Membrane Sample Valve
• Sampling valve Type 20 & 32
• SB Micro Sample Port
• CPM Series
• CPM-I
• CPM-I-D60
• CPM-O
• i-SSV
• Unique RV-P,
• Unique RV-ST
• Unique 7000 series (or Unique SSV), Including the Following Types: 7000 Small Single Seat
Valve / SSSV, Tank Outlet, Long Stroke, Reverse Acting, Manual Operation, Manual
Regulation, Aseptic (diaphragm), Tangential Side Port, Y-Body, Two step/Three Position
Actuator, Plug design: Replaceable Elastomer, TR2;
• 45BYMP, 45BY, L45BYWW
• LKC-2,
• LKUV-2;
• Unique Vacuum Breaker Valve
• D10FL, D10FVL
• 5308/5309 Series Ball Valve
• SBV Sanitary Ball Valve
• LKAP
• LKB
• LKBV
• LKSV
• DV-ST
• Safety Valve
• AH, MH
• TPR (Tank pressure relief valve)
Created from ALCS Template TD00000074

• MFV (Micro flow valve)

• MSV (Micro sample valve)
• CB Flask (Carlsberg Flask)
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 3/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 • Micro Sample port Type M
• AVV (Anti Vacuum valve)
• AVH (Anti Vacuum House)
• PRV (Pressure relief valve)
• CO2 House
• PE (Pressure Exhaust valve)
• Unique Vacuum Breaker Valve
• Tank Pressure Regulator
Pumps
• FM-OS
• GM
• LKH-5, -10, 15, 20, 25, 35, 40, 45, 50, 60, 70, 75, 85, & 90;
• LKH EVAP -5, -10, 15, 20, 25, 35, 40, 45, 50, 60, 70, 75
• LKH UltraPure (designated as LKHUP in Europe, LKHU in North America); LKHU-10, 20, 25,
35, & 40;
• LKHPF-10, 20, 25, 35, 40, 45, 50, 60, & 70;
• LKHE-10, 15, 20, 25, 35, 40, 45, 50, 60, 70, & 75;
• LKHI-10, 15, 20, 25, 35, 40, 45, 50, & 60;
• LKH-112, 113, & 114, LKH-112/P, 113/P, 114/P, 122/P, 123/P, & 124/P (P stands for high
pressure);
• LKHex -10, 15, 20, 25, 35, 40, 45, 50, 60, 70
• LKHex UltraPure -10, 15, 20, 25, 35, 40, 45, 50, 60, 70
• LKHM
• LKH Prime 10, 20, 40
• LKH Prime UltraPure 10, 20
• SolidC-1, 2, 3, 4;
• SolidC UltraPure -1, 2, 3, 4;
• i-CP -101, 102, 103, 104;
• i-CP 2010, 2020, 2025, 2035, 2040, 2050
• MR-166,
• MR-185,
• MR-200;
• MR-300;
• OptiLobe 12, 13, 22, 23, 32, 33, 42, 43, 52, 53;
• SRU Series - SRU1, SRU2, SRU3, SRU4, SRU5 & SRU6, including relief valve;
• SX Series - SX1, SX2, SX3, SX4, SX5, SX6, & SX7, including relief valve.
• SX UltraPure Series - SX1, SX2, SX3, SX4, SX5, SX6, & SX7,
• SCPP-1, -2
• STP
• OS Twin Screw: 12, 14, 16, 22, 24, 26, 27, 28, 32, 34, 36, 37, 38, 42, 44, 46
• DuraCirc: 32, 33, 34, 42, 43, 52, 53, 54, 62, 63, 72, 73, 74
• DuraCirc Aseptic: 42, 53, 54, 63, 73
Created from ALCS Template TD00000074

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 4/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Tank Cleaning Equipment
• Blind cap tool Kit for PlusClean
• Multijet 25, 40,50 ,65
• MultiMidget
• MultiMagnum
• PlusClean
• SaniJet 20, 25
• SaniMicro
• SaniMidget
• SaniMidget SB,
• SaniMidget retractor
• SaniMagnum SB,
• SaniMega SB
• SaniMega SB Hi
• SSB retractor
• Tj20G, Tj40G
• TZ-66, -67, Brew Kettle, -89, -750
• LKRK
• Welding adapter for tank cleaning machine

Instrumentation
• Rotacheck 96140699xx;
• Hygienic Tank Connection (HTC) 96140708.
• In-line instrumentation body
• Welding adapters
• Unique Flexbodies

Tubes & Fittings

• Sanitary, ISO 2037
• Sanitary, EN 10357-A / DIN 11850
• Sanitary, BS 4825, Part1
• Sanitary, JIS G 3447
• Tri-clover Sanitary ASME
• Tri-clover UltraPure, ASME BPE
• Tri-clover UltraPure, Series A/DIN
• Tri-clover UltraPure, Series A/ISO
• Tri-clover UltraPure ISO 2037 tubes & fittings
• Installation accessories – product wetted

Tank Covers
• HLSD
• LKDC
• LKD
Created from ALCS Template TD00000074

• Type C, O, R

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 5/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Tank cleaning accessories
• Hoses
• Welding Adapters

Filters and Strainers

• LKVF
• LKSF, -CL, -BL
• LKIF
• SM1/SMS1, sizes 1 in., 1.5 in., 2 in., 2.5 in. & 3 in.;
• SM2/SMS2, sizes 1.5 in., 2 in., 2.5 in. & 3 in.;
• SESR1/SESR2/SEBR1/SEBR2, sizes 2 in., 3 in. & 4 in.;
• SEBHVWR1/SEBHVWR2, sizes 2 in., 3 in. & 4 in. (v-wire).
• SEFR1/SEFR2, sizes 2 in., 3 in. & 4 in.

Sight Glasses
• According to DIN
• D45MP
• Inline sight glass
• LKFL
• LKGG-1
• LKS
• Light fitting
• Metal fuse sight glass
• Tank side mounted sight glass

Mixing & Blending Equipment

• RJ Mixer IM-10, -15, -20, -25, IMXD
• Agitator ALS, ALS-SD ALB, ALT, ALT-SB, ALTB, ALTB-SB
• MagMix MMU 338, 434,
• HPM Mixer M15, S15
• HP Mixer
• LeviMag™ UltraPure
• LeviMag

Obsolete products
• All spare parts still available
Created from ALCS Template TD00000074

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 6/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Appendix B
PRODUCT DESCRIPTION/DESIGNATION:

3A certified Alfa Laval Fluid Handling Products

Valves:
Double-Seat Mixproof Valves
• Unique CP3,
• Unique PMO Plus (R) CP,
• Unique PMO Plus (R),
• Unique PMO-F,
• Unique PMO (1.5" to 6" sizes),
• Unique TO (2.0" to 4.0" sizes),
• Unique (1.5" to 4.0" sizes),
• UniquePMO Plus (R) CP Horizontal Tank Valve (2.5" to 6" sizes),
• Unique PMO Plus (R) CP Vertical Tank Valve (2.0" to 4" sizes),
• Unique PMO Plus (R) CP Curd Valve and Unique PMO Curd (4" to 6" sizes),
• Unique LP and Unique LP-F (4" to 6" sizes),
• All valve models include Alfa Laval ThinkTop (R) controltop assemblies (Tolerance Program
No. 4) and TTOP Series 9634 (P/N 196433 (ASi) and 196413 (24VDC)) with 1.5 mm
sensitivity.

Compression-Type Valves
• Unique 7000 (SSV or SSSV) Series, including the following options: Long Stroke, Reverse
Actuator, ATEX; Plug designs: Replaceable Elastomer seat, Replaceable TR2 seat, or Metal
seat:
• 7610 Shut-Off, Change-Over, Y-Body;
• 7620 Tangential Valves;
• 7630 Tank Out Vertical Mount;
• 7632 Vertical Tank Outlet (for TriClamp Spud);
• 7635 Horizontal Tank Outlet (for TriClamp Spud - tangential ports)
• 7640 Flow Diversion Vertical
• 7650 Flow Diversion Horizontal -RA only (tangential ports)
• 7710 Regulating - Pneumatic Control
• 7711 Regulating - Digital Control
• 8610 Aseptic (diaphragm) version of 7610
• 8620 Aseptic (diaphragm) version of 7620
• 8710 Aseptic version of 7710
• Unique RV-P Control Valve
• Unique RV-PA Control Valve – Aseptic
• Unique Sample Valve Type M (sizes /10)
Created from ALCS Template TD00000074

• 700 Series, including the following types: Long Stroke, Reverse Acting; Air Actuator, Two
Step/3Position Actuator; Plug designs: Molded Plug, Replaceable TR or TR2 seat, or Metal
seat
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 7/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 • 761 Shut Off, Divert, Y-Body
• 762 Kettle, Tank Outlet, and Tangential valves
• 771S Throttling Valve - metal seat.

COP Models
• D60RTHMP Pressure Relief Valve,
• 660-10-40 Sampling Valve
• D10FL, D10FVL, Sizes 1.5 in., 2 in., 2.5 in., & 3 in.
Vacuum Breakers and Check Valves
• 45BYMP, 45BY, L45BYWW, Sizes 1.5 in., 2 in., 2.5 in. & 3 in
• LKC-2, Sizes 1 in., 1.5 in., 2 in., 2.5 in., 3 in., 4 in.
• LKUV-2, Unique Vacuum Breaker Valve (1 size, 1.5 in. x 0.5 in.)

Plug-Type Valves
• D10MP, D10WW, D10C, D10MPR, D10WWR, D10CR, D11MP, D11WWW

Pressure Reducing and Back Pressure Regulating Valves

• CPMI-2 and CPMO-2.

Boot Seal-Type Valves

• Unique Sampling Valve Type P, Sizes 4, 10 and 25, Tank Weld, ISO Collared Pipe Weld, DIN
Collard Pipe Weld, and Clamp.

Pumps
CIP Models: Pumps with Tri-Clamp, H-Line, I-Line, and DIN 11864 Form A fittings:
• LKH Prime (LKHPM-10, 20, 25, 40);
• LKH Prime UltraPure (LKHPMU-10, 20, 25, 40);
• LKH-5, 10, 15, 20, 25, 35, 40, 45, 50, 60, 70, 75, 85, 90
• LKH UltraPure (LKHUP-10, 20, 25, 35, 40, 45, 60, 70/LKHU-10, 20, 25, 35, 40, 45, 60, 70)
• LKH High Pressure (LKHPF-10, 20, 25, 35, 40, 45, 50, 60, 70)
• LKHE Evaporator (LKHE-10, 15, 20, 25, 35, 40, 45, 50, 60, 70, 75)
• LKHI-10, 15, 20, 25, 35, 40, 45, 50, 60;
• LKH Multi-Stage (LKH-112, 113, 114)
• LKH Multi-Stage High Pressure (LKH-112/P, 113/P, 114/P, 122/P, 123/P, 124/P)
• SolidC-1, 2, 3, 4;
• MR Liquid Ring (MR-166US, 185US, 200US)
• SRU PD Pumps without relief valves (SRU1, 2, 3, 4, 5, 6, 7, 8)
• SX PD Pumps (SX-1, 2, 3, 4, 5, 6, 7)
• OptiLobe 12, 13, 22, 23, 32, 33, 42, 43, 52, 53;
• SCPPI: Models 006, 015, 018, 024, 030, 034, 045, 060, 064, 130, 134, 180, 220, 224,
320;
• SCPP2: Models 006, 015, 018, 024, 030, 034, 045, 060, 064, 130, 134, 180, 210, 220,
224, 320
Created from ALCS Template TD00000074

• S Series: S1, S2, S3, S4, S5, S6, S7 & S8, including relief valve
• X Series: X1, X2, X3, X4, X5, X6, & X7
• L Series L2, L3, & L4
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 8/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 • STP20/106/05, STP20/106/07, STP20/106/10, and STP125, All fitted with or without
pressure relief valve (PRV), All fitted with either o-ring seal or mechanical seal.
• Twin Screw CIP Models: OS22, OS24, OS26, OS32, OS34, OS36, OS42, OS44, OS46;
with Tri-Clamp, DIN 11864 Form A Fittings, and flat sanitary flanges

COP Models:
• SRU PD Pumps with relief valves (SRU1, 2, 3, 4, 5, 6, 7, 8)

Spray Cleaning Devices

• Gamajet Aseptic 1
• SaniMidget SB: 16B102-x0, 16B132-x0, 16B152-x0, 16B182-x0, 16B202-x0, 16B203-x0,
• SaniMagnum SB, 16B232-x0, 16B233-x0; SaniMagnum SB: 17B102-x0, 17B132-x0, 17B202-
x0, 17B203-x0, 17B232-x0, 17B233-x0;
• SaniMega SB: 18B102-x0, 18B132-x0, 18B142-x0, 18B152-x0, 18B202-x0, 18B203-x0,
18B232-x0, 18B233-x0, 18B262-x0, 18B263-x0, 18B292-x0, 18B293-x0.

Instrumentation
• Rotacheck 96140699xx
• Hygienic Tank Connection (HTC) 96140708
• HTC Instrument Housings 96142581xx.

Sanitary Fittings
• B2CMP, 2FMP-14, 2FMP-15, 2CMP-31MP, B2KMP, B7MP, B7MPS, B7IMPS, B7RMP,
B7RMPS,
• B9MP, L14AM, 14WMPS, BS14AM, 14WLMP, 14WLMO, 14RMP, 14MPW, 16AMP, 17MP-
14,
• 17MP-15, B31-14MP, B32-14MP, B2S, L2S, 2WCL, L2CM, B2CMW, L2C, L2F, B2KS,
B2KMW,
• 2WK, B2UMPBOA, B2UMPSOA, B7WWW, B7WWM, B7WWMS, B7IWWMS, B7WMSW,
B7RWWW,
• B7RWWM, B7RWWMS, B9WWWW, B9RWWWW, B16W, L31, B31, B31M, L32, B32,
B32M, L14A,
• 14PRFS, 14R, 14W, 14WL, L15A, 15TRFS, 15R, 15W, 15WL, 16A, H-14W, H-15W, H-16A-
14, HDI-
• 14W, HDI-15W, HDI-16A-14, HDI-16A-15, 14WMV, 14MVW, 16AMV, 14PRFJP, 15TRFJP,
L14AJP,
• L15AJP, 16AJP, 15TRFDC & L15ADC.

Tank Covers
• LKDC-518-100, LKDC-518-200
• LKDC-620-100, LKDC-620-200
• LKD-532x432-060, LKD- 532x432-100

Filters and Strainers

Created from ALCS Template TD00000074

• SM1/SMS1, sizes 1 in., 1.5 in., 2 in., 2.5 in. & 3 in.;
• SM2/SMS2, sizes 1.5 in., 2 in., 2.5 in. & 3 in.;

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 9/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 • SESR1/SESR2/SEBR1/SEBR2, sizes 2 in., 3 in. & 4 in.;
• SEBHVWR1/SEBHVWR2, sizes 2 in., 3 in. & 4 in. (v-wire).
• FM1/FMS1, sizes 1 in., 1.5 in., 2 in., 2.5 in. & 3 in.;
• FM2/FMS2, sizes 1.5 in., 2 in., 2.5 in. & 3 in.;
• SEFR1/SEFR2, sizes 2 in., 3 in. & 4 in.

Sight Glasses
• D54MP, Sizes 1.5 in. - 4 in.

Sanitary Gaskets compliant to 3A Standard 18-03 Class II of the type:

• 40MPF-U
• 40MPF-SFY
• 40MPF-E
• 40MPF-X
• 40 MP-U
• 40 MP-SFY
• 40 MP-E
• 40 MP-X
• 42 MP-U
• 42 MP-SFY
• 42 MP-E
• 42 MP-X
• 40MOF-E

Sanitary Gaskets compliant to 3A Standard 20-23 of the type:

• 40 MP-G
• 42 MP-G
Created from ALCS Template TD00000074

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 10/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Appendix C
Spare part list 3A

'Material Manufacturer
Material Material name ID
6-7633 61 40-63 STEM BUSHING 763361
6-482292 00 4410E-80-1 CARBON 482292
6-763361 00 40-63 STEM BUSHING 763361
6-751540 00 17-344-USF -RING 751540
6-3005 52 O-ring 01-1165-19-U 300552
6-4802 26 O-Ring 480226
SP328G-80-1-1-CER CLAMP IN SEAT 480238
6-4804 68 O-ring S328-80-2-U-3413 480468
6-480479 00 O-ring S328-80-2-U 480479
6-4804 79 O-ring S328-80-2-USF 480479
6-480525 00 Seal 328E-80-1A 480525
6-4806 56 O-ring S328-80-2-SFY 480656
6-4812 95 Seal kit C216-2 481295
6-4812 99 Seal kit Tri-Clover C216-3 481299
6-4813 00 Seal kit Tri-Clover C218-3 481300
6-4813 04 Seal kit SP218-1 481304
6-480238 SP328G-80-1-1-CER CLAMP IN SEAT 480238
6-4814 70 Seal seat SP328G-80-1-1-SC 481470
6-4814 98 Stub shaft CS328E21T-06-316L 481498
6-4814 99 Stub shaft CS328E25T-06-316L 481499
6-4841 01 328D-24B-316L Impeller retainer 484101
6-4850 94 Seal carbon SP328E-80-1 485094
6-298416 00 40MPF-X-4 Flanged TC Gskt White Silicon 298416
6-31923 0009
1 Thermometer 0-200deg.F Tri-Cl 11/2" 5452115
6-770920 00 7-999-1/2 X1/4-316L BODY 77092000
6-220191 00 Back-up gasket FAD-1 1/2-01-U 220191
6-31439 0164
6 CARBON SEAL ASSEMBLY 3143901646
6-628243 00 D10CR-2-02X-S RUBBER PLUG 62824300
Created from ALCS Template TD00000074

6-621740 00 D11CR-1 1/2-02X-S Rubber Plug 62174000

6-628246 00 D11CR-2-02X-S RBBR PLUG 62824600
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 11/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 6-480232 00 Casing gasket S328-90A-E 480232
6-2993 20 Gasket 60YM-4-15B-U 299320
6-4815 22 Gasket SP328G-80-1-2-G Teflon 481522
6-481522 00 Gasket SP328G-80-1-2-G Teflon 481522
6-401608 00 Gasket R25-1 1/2-73 401608
6-403612 00 Gasket R300-4-73 403612
6-402604 00 Gasket R60-2-59A 402604
6-343300 00 GHVB VAC BRKR PLUNGER 343300
6-751064 00 Gland O-ring 17-275-USF 751064
6-9630 02
3532 O-ring 1555142
6-300027 00 O-ring 01-1165-19-E 300027
6-300064 00 O-ring 01-1165-19-SFY 300064
6-881 14919 O-ring 10-6 / 60-7-902-9 88114919
6-881 14932 O-ring 10-8 7811207-02 88114932
6-290004 00 O-ring 10CPLO-3-73-1A-E 29000400
6-181256 00 MS-105-58A-CP PLUG VENTED 181256
6-481430 00 Shaft CS216E18T-06-316L 481430
6-481431 00 Shaft-KB CS328E18T-06-316L 481431
6-481519 00 Seal seat SP216G-80-1-1-SC 481519
6-481521 00 Gasket SP216G-80-1-2-G Teflon 481521
6-482808 00 Gasket SP216G-80-1-21-G Teflon 482808
6-9630 01
9388 O-ring FPM 1551218
6-9630 03
7519 O-ring FPM 1551265
6-4000 56 O-ring R25-1 1/2-90B-E 400056
6-401725 00 O-ring R25-1 1/2-90B-U 401725
6-403591 00 O-ring R300-4-37A-U 403591
6-403631 00 O-ring R300-4-80-4B-U 403631
6-402647 00 O-ring R60-2-80-3A-U 402647
6-7500 84 O-ring SFY 750084
6-960123 00 C2047-005-034 2" KIT STANDARD 4308 960123
6-9634 08
3201 O-Ring Stem FPM #109 3A 9634083201
Created from ALCS Template TD00000074

6-9680 12
4011 O-ring Ø79.2x5.7mm, NBR 9680124011

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 12/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 6-2202 48 OVERSCREEN 44M FMS1-1 1/2 220248
6-220943 00 Overscreen S2-2 1/2-44P-316L 22094300
6-7505 98 PLUG TEFLON 750598
6-403662 00 Retainer shaft R300-4-102 403662
6-4033 40 Rotor R125-2 1/2-02R-2PH-U D.152x79 403340
6-401628 00 Rotor ring R25-1 1/2-08 Carbon 401628
6-403581 00 Rotor ring R300-4-08 Carbon 403581
6-402484 00 Rotor ring R60-2-08 Carbon 402484
6-4024 84 Rotor ring R60-2-08 Carbon 402484
6-403596 00 Seal bearing R300-4-47 403596
6-403600 00 Seal bearing R300-4-49 40360000
6-755370 00 Seal O-ring 17-17-USF 75537000
6-1883 51 Seal P438-47 Inboard Bearing 188351
6-480293 00 Impeller retainer 328D-24C-U with rubber 48029300
6-330924 00 Seat R51-42-02-2 33092400
6-482211 00 Service kit SP/C218/C328DG-1-U-SC 48221100
6-9611 92
4201 Service kit FPM SFY 9611924201
6-403568 00 403568
6-403576 00 Shaft R300-4-12-316L 403576
6-9630 02
6543 Static seat SS M200-M220 3149906375
5998000-2721 Union Weldon TCL ISO 76.1mm EPDM Gasket 7225263000
6-9612 71
7702 SEAL KIT BUNA, CL PUMP DG - 41.3MM W/ CA 9612717702
90501-0870 Impeller R125-2.5-02A-4-TCI #N/A
6-2000 90 Sample valve Tri-Clamp A30SMP-2-316 200090
6-8400 48 30-101L-316 TRI-FLO LEVEL CONTROL 840048
6-840076 00 30-101-316 TRI-FLO LEVEL CONTROL 84007600
90501-5501 Varaosa 5310101
6-401250 00 Wear ring R10-1 1/2-80-1-316L 401250
6-401616 00 Wear ring R25-1 1/2-80-1-316L 401616
6-40306800 Shaft R125-2 1/2-06-316L 40306800
6-482737 Casing gasket S114-90A-U 482737
6-48273700 Casing gasket S114-90A-U 482737
Created from ALCS Template TD00000074

6-48280800 Gasket SP216G-80-1-21-G Teflon 482808

Plug vented MS-105-58A-CP 181256
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 13/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 MS-105-58A-CP PLUG VENTED #
Seal Bearing 2-1/2EH-105-72A 185752
Plug valve D11CR-2-S, 1 1/2" 022199
Rotor, R3-1-02-6DH-U 00123
Seal kit PR60-3 400479
Retainer gear R60-2-98 402652
Block Vee Packing 17-283 751372
Plug Teflon 20-516B-G 751786
Stem Seat TFE 20-580-4 752104
20-580-3 TFE STEM SEAT PTFE 752102
Vee block packing 17-97 755460
Felt seal17-101 755464
Stem bushing 4" 40-73 762507
Guage 54-30B-N-5-G-2 766100
Stem and Seat Assy.19TR-1254-2 1/2-316L 770230
Body 7-1059M-2 1/2-316L 771141
Stem assembly 19-1365-1X2-316L 771600
Stem assembly 19-1024-2 1/2-316L 771680
Stem and seat ass. 19TR2-1254A-4-316L 773239
Stem Assembly 19-842-316L 778309
Regulating Valve Tri Clover 171-10M-90-1 800029
Shaft Set GHH-5 1.1-1.5kW 9612135945
Shaft GHH70/-80 324-326TS 364-365TS 9612512503
Seal ring 13.5 PTFE USP Class VI 9613456911
Seal ring 42.4 PTFE USP Class VI 9613470044
Service kit 361TR DIV 2" BUNA 9613990064
Service kit A30SMP 1.5,2 & 3" SFY A30smp 9613990621
Plug Seal Set PTFE TR2 2-1/2"/63.5/DN65 9614059451
Shaft for MR-200S 2349 IEC 160 9615207301
Seal Kit Cover/Spline PTFE SR1 KU1EE 9630099426
Stem and Plug Assy.19TR2-1305-01-3-316L 9634057757
Stem and Plug Assy.19TR2-1380-01-4-316L 9634057767
Plug Large Cleanout 045-320 9639046301
Buna Ball 2.5" Check Valve, Evaperator 624209
Created from ALCS Template TD00000074

Buna Ball 3" Check Valve, Evaperator 625150

Gasket 4.5" EPDM Body For 4" Valv 750686
General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 14/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business
 Gasket Filling head 110092
Impeller Tri-Blender 540261
O-ring 751121
O-ring 751671
O-ring 755353
O-ring 299335 299335
Packing Blocking Vee 751372
Packing Vee 751118
Plug 750263
Repair Kit 1.5"Buna 9613990560
Retainer O-Ring 2, 2 1/2, 3" 9634053630
Seat Tfe Stem 752096
Seat Tfe Stem 752100
Seat Tfe Stem 752102
Seat Tfe Stem 752104
Stem And Seal Assembly 772744
Stem Assembly 772941
Stem Protector Spacer 4" 751019
Stem Seat Assy 9634051446
Created from ALCS Template TD00000074

General notice:
The information included in this document is valid from stated version date until it is superseded. Because of the possible changes
in the underlying legislation, regulations and standards, as well as possible changes in our products, we cannot guarantee that
the status of this document will remain unchanged. We, therefore recommend our customers to verify the regulatory status
periodically. The information included in this document shall be relied upon entirely at the customer’s own risk.
TD0000007

In case of any changes, the document will be renewed and the previous document will cease to be valid.

page 15/15
Document ID No. DT00003922
Document revision No: 008
Revision date:2023-06-20
Classified by Alfa Laval as: Business