MULTI
BUSBAR
FU 490 / 495 / 500 / 505 / 510 M SILK® Premium
Monocrystalline Photovoltaic Module - 150 1/3 cut MBB cells
Engineered
GENERAL FEATURES
SILK® Premium STANDARD MODULE
in Italy
• 15-year product warranty
• 150 Large area cells based on 210 mm
front glass front glass front glass front glass
silicon wafers and 1/3-cut cell technology EVA EVA EVA
LIABILITY
INSURANCE • Up to 21.25% module efficiency with high
ribbon
ribbon ribbon
density interconnect technology cell cell cell
IEC 61215:2016 - IEC 61730:2016
• Lower LCOE (Levelized Cost Of Energy),
& Factory Inspection
reduced BOS (Balance Of System) cost,
50 % 0%
shorter payback time
Fire Resistance - Class C
• Less shades and more reflected light to
the cell thanks to the round ribbon
• 2 independent section design secures a
higher energy yield in case of shading
• Lower risk of micro cracks and hot-spot
• Improved low light performance
• Half cut design in combination with multi
1098
busbar reduce operating current and
internal resistance
Frame with 35
drainage
holes
35
Grounding
holes x4
GUARANTEES
Product
Mounting label
holes
x8 (14x9)
Performance guarantee Market standard performances
Max power decrease 0.5%/year FuturaSun performances
Junction
Holes
97% at the end of first year
Box
x4 (10x7)
1400
2185
90% at the end of 20th year NEW
87% at the end of 25th year
1300
Product guarantee
(back side) NEW
15 YEARS
(front side)
Note: dimensions in mm
tolerance +/- 2 mm
ELECTRICAL DATA
FU 490 M FU 495 M FU 500 M FU 505 M FU 510 M
MODULE SILK® Premium
SILK® Premium SILK® Premium Silk® Premium SILK® Premium SILK® Premium
Standard Test Conditions STC: 1000 W/m2 - AM 1.5 - 25 °C - tolerance: Pmax (±3%), Voc (±4%), Isc (±5%)
Module power (Pmax) W 490 495 500 505 510
Open circuit voltage (Voc) V 51.20 51.40 51.60 51.80 52.00
Short circuit current (Isc) A 12.17 12.24 12.31 12.38 12.44
Maximum power voltage (Vmpp) V 42.47 42.64 42.85 43.06 43.26
Maximum power current (Impp) A 11.54 11.61 11.67 11.73 11.79
Module efficiency % 20.42 20.63 20.84 21.05 21.25
Nominal Module Operating Temperature NMOT: 800 W/m2 - T=45 °C - AM 1.5
Module power (Pmax) W 371 375 379 382 386
Open circuit voltage (Voc) V 48.40 48.60 48.80 49.00 49.2
Short circuit voltage (Isc) A 9.77 9.83 9.89 9.94 9.99
Maximum power voltage (Vmpp) V 40.00 40.20 40.40 40.60 40.7
Maximum power current (Impp) A 9.26 9.32 9.37 9.43 9.49
TEMPERATURE RATINGS
Temperature coefficient Isc %/°C 0.05
Temperature coefficient Voc %/°C -0.26
Temperature coefficient Pmax %/°C -0.35
NMOT * °C 43
Operating temperature °C from -40 to +85
*Nominal Module Operating Temperature
MECHANICAL SPECIFICATIONS
Dimensions 2185 x 1098 x 35 mm
Weight 26.3 kg
Glass High transmission, Low iron, Tempered, ARC, Transparent, 3.2 mm
Cell encapsulation EVA (Ethylene Vinyl Acetate)
Cells 150 monocrystalline 1/3 cut MBB PERC cells 210 x 70 mm
2022_150m_490-510_SILK_Premium_en
Authorized Dealer
Backsheet Composite multilayer film
Anodized aluminium frame with mounting
Frame
and drainage holes
Junction box Certified according to IEC 62790, IP 68 approved, 3 bypass diodes
Solar cable, length 1300 mm or customized
Cables
assembled with MC4-compatible plugs
Maximum reverse current (Ir) 20 A
1500 V
Maximum system voltage
(1000 V on request)
Design load: 3600 Pa
Mechanical load (snow)
5400 Pa (including safety factor 1.5)
Design load: 1600 Pa FuturaSun srl
Mechanical load (wind)
2400 Pa (including safety factor 1.5) Riva del Pasubio, 14 - 35013 Cittadella - Italy
Tel + 39 049 5979802 Fax + 39 049 0963081
Protection Class II - accordance to IEC 61730
www.futurasun.com - [email protected]
Notice: All data and specifications are preliminary and subject to change without notice
