Printed on: 09/15/2020
Coupling Pipe Body
HW -SC80 Grade: P110
Body: White
Grade: P110
1st Band: White
1st Band: - 2nd Band: -
2nd Band: - 3rd Band: -
3rd Band: - 4th Band: -
Outside Diameter 10.750 in. Wall Thickness 0.672 in. Grade P110
Min. Wall Thickness 87.50 % Drift API Standard Type Casing
Connection OD Option SC8 0
Pipe Body Data
Geometry Performance
Nominal OD 10.750 in. Wall Thickness 0.672 in. Body Yield Strength 2340 x1000 lb
Nominal Weight 73.200 lb/ft Plain End Weight 72.40 lb/ft Min. Internal Yield Pressure 12,030 psi
Drift 9.250 in. OD Tolerance API SMYS 110,000 psi
Nominal ID 9.406 in. Collapse Pressure 10,010 psi
Connection Data
Geometry Performance Make-Up Torques
Connection OD 11.307 in. Tension Efficiency 80 % Minimum 17,630 ft-lb
Coupling Length 13.150 in. Joint Yield Strength 1872 x1000 lb Optimum 22,040 ft-lb
Connection ID 9.567 in. Internal Pressure Capacity 12,030 psi Maximum 26,450 ft-lb
Make-up Loss 6.082 in. Compression Efficiency 100 %
Shoulder Torques
Threads per inch 5 Compression Strength 2340 x1000 lb
Minimum 1100 ft-lb
Connection OD Option SC80 Max. Allowable Bending 37.60 °/100 ft
Maximum 17,630 ft-lb
External Pressure Capacity 10,010 psi
Notes
This connection is fully interchangeable with:
HW - 10.75 in. - 65.7 / 79.2 / 85.3 / 91.2 lb/ft
Datasheet is also valid for Special Bevel option when applicable - except for Coupling Face Load, which will be reduced. Please contact a local Tenaris technical sales representative.
For the lastest performance data, always visit our website: www.tenaris.com
Tenaris has issued this document for general information only, and the information in this document, including, without limitation, any pictures, drawings or designs (“Information”) is
not intended to constitute professional or any other type of advice or recommendation and is provided on an “as is” basis. No warranty is given. Tenaris has not independently verified
any information –if any- provided by the user in connection with, or for the purpose of, the Information contained hereunder. The use of the Information is at user’s own risk and Tenaris
does not assume any responsibility or liability of any kind for any loss, damage or injury resulting from, or in connection with any Information contained hereunder or any use thereof.
The Information in this document is subject to change or modification without notice. Tenaris’s products and services are subject to Tenaris’s standard terms and conditions or
otherwise to the terms resulting from the respective contracts of sale or services, as the case may be, between petitioner and Tenaris. For more complete information please contact a
Tenaris's representative or visit our website at www.tenaris.com . ©Tenaris 2020. All rights reserved.
