Scribd
Upload
20 views3 pages

Modern Planter

A simple, modern planter (and drip tray) that requires no supports to print. The planter has a drain hole and the drip tray ensures proper drainage for the plant. This design can fit a 4-inch diameter nursery pot.

Uploaded by

Nicolas Bustos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views3 pages

Modern Planter

A simple, modern planter (and drip tray) that requires no supports to print. The planter has a drain hole and the drip tray ensures proper drainage for the plant. This design can fit a 4-inch diameter nursery pot.

Uploaded by

Nicolas Bustos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Modern Planter

Xander

VIEW IN BROWSER

updated 10. 4. 2021 | published 10. 4. 2021

Summary
A simple, modern planter (and drip tray). Easy to print, requiring no
supports!

  f k h  d
10.02 hrs 2 pcs 0.35 mm 0.40 mm PLA 220 g Prusa
MK2.5/S

Household > Outdoor & Garden

Tags: planter garden flowerpot plants succulents


succulentpot driptray

A simple, modern planter designed to require no support structures.

To ensure proper drainage for the plant, the pot has a drain hole and drip
tray!

This design can also easily fit a 4" diameter nursery pot

Printing Instructions

All described setting are captured in the .3mf files provided


Planter

• Layer Height: 0.35mm


• Infill: 10% for first 5mm, then 0% (used layer height modifier)
• Seam Position: Aligned (for a clean look)

Drip Tray

• Layer Height: 0.35mm


• Infill: 100%
• Seam Position: Aligned (for a clean look)
• Ironing: Used on the raised petal feature and the top edge.
◦ Use height range modifier at 2.5mm and set the top section
ironing to "all top surfaces)
◦ To prevent clogs, set Ironing Flow to 30% and Ironing Speed
to 30mm/s

Model files
modern-planter.3mf

modern-planter-drip-tray.3mf

modern-planter.stl

modern-planter-drip-tray.stl
Print files
modern-planter-drip-tray_035mm_pla_mk25s_1h49m.gcode
h PLA k 0.40 mm f 0.35 mm  1.81 hrs  36 g d Prusa MK2.5/S

modern-planter_035mm_pla_mk25s_8h13m.gcode
h PLA k 0.40 mm f 0.35 mm  8.21 hrs  184 g d Prusa MK2.5/S

License 

This work is licensed under a


Creative Commons (4.0 International License)

Attribution—Noncommercial—No Derivatives

✖ | Sharing without ATTRIBUTION


✖ | Remix Culture allowed
✖ | Commercial Use
✖ | Free Cultural Works
✖ | Meets Open Definition

You might also like