MyKey Pro User Manual – Before You use

Caution before Use

- Please read the manual thoroughly before use to memorize functions.

- Product is auxiliary module that enable to serve convenience for Drivers for driving life, vehicle’s stolen or damage
itself is not manufacturer’s responsibility.

- Manufacturer highly recommend to install to automatic transmission vehicle and the product is designed to use
with automatic transmission as well. To use to manual transmission vehicle, it require more caution for driver not to
try “remote engine start” while gear is engaged, it may cause unexpected accident and manufacturer is not
responsible for any accident caused by “remote engine start” while gear is engaged if the vehicle is manual
transmission.

- Required to try “remote engine start” while gear position is on “P” only and Do not try “remote engine start” driver
is inside of vehicle.

- Do not put or neglect FOB inside of vehicle. It may cause sudden door lock or car stealing.

- Product doesn’t affect to the vehicle’s original functions when driver encountered any of vehicle trouble, find
solution in vehicle service center firstly.

- If vehicle’s battery is reconnected in case of car repair, battery change, etc or FOB replacement or registered
newly some of function of product may not work, please re-check with dealers of MyKey.

- Low FOB’s battery may cause malfunction, please replace battery of FOB
 MyKEY-PRO Product Contents

1. Main module 2. 6P Main wires 3. 20P Com. wires 4. User manual 5. Simple manual
6. Siren(optional) 7. Shock sensor(optional)

(Optional)
순정리모컨 기능 / 스타트버튼 기능

Functions on buttons of original FOB

1. Door Lock – Set Armed

2. Door Lock – Remote Start

(double click) & Disarmed

3. Door Unlock – Disarmed

4. Trunk – Trunk Open

5. Panic - Siren

*** MyKEY-Pro uses “ ” button only to operate functions of MyKEY products

like Remote Engine Starting. Driver can use FOB as usual including “ ” button.

*** No need to put & hide original FOB of vehicle for using MyKEY-Pro, driver just use both of FOB from
vehicle purchasing.

*** In case of driver re-boot FOB in Service center due to lost FOB, some function of MyKEY may not
operate properly.

*** MyKEY-Pro works to Smarkey / Button Start & Automatic transmission vehicles only.
Function Chart
Button Function Arm Condition Button Click Vehicle Response

Door lock Remote Armed FOB 2 times (1sec interval) 4 times of Hazard light blink,
on FOB Start (door closed) out of vehicle 2 times of Horn,
Horn 2 times after engine started

Remote Armed FOB 2 times 2 times of Hazard light,

Start Off (door closed) out of vehicle 1 time of Horn while engine OFF

Auto door Door Closed FOB 2 times (1sec interval) 2 times of Horn
SET inside vehicle / after 2 times of Hazard light
Foot Brake

Auto door Door Closed FOB 2 times (1sec interval) 1 time of Horn
SET Off inside vehicle / after 1 time of Hazard light
Foot Brake

Door Turbo Door Closed While Engine is 1 time after “Beep” None
trigger Timer ON
button Smart Door Closed While Engine is 2 times after “Beep” 2 times of Hazard light,
Stopping ON 1 time of Horn

Emergency Armed NON-Possession Press long 3 times of Hazard light,

Door unlock (door closed) of FOB 2 time of Horn
When put P/W 1 time
of each Hazard light & Horn

Emergency Door open FOB Press long 3 times of Hazard light,

Door unlock (Start Button is inside vehicle 2 time of Horn
/ Password on ACC) When put P/W 1 time
SET of each Hazard light & Horn
Functions – Remote Engine Start (double click)

Make Remote Engine Start by double click!

- Make Remote Engine Start by press “ ” button 2 times as 1sec. Interval.

(Operational on gear position “P” only)

- then Hazard lights blinks 4 times and Horn honking 2 times (Car alarm is armed).

- Remotely Starting will keep for 15 minutes, if there is no entering car, engine will be automatically shut-off.

- When driver get into vehicle, press brake to keep the engine is running. (door unlock by approaching or by
press “ ” button on the FOB)
(Some model may keep the engine on as driver get in)

- If engage gear without possession of FOB, engine will be shut off.

- If failed remote engine start, MyKEY will try remote engine start by 3 more times.

- It may sooner or later for remote engine start according to Vehicle model or condition. (Diesel, or LPG engine)

* Notice – Please Do not try to make remote engine start inside of vehicle. It may cause serious accident.
Functions – Auto door unlock & lock by approaching or walk away

Automatic Door lock & Unlock

Automatic door unlock by FOB approaching to the vehicle.

- When the driver is approaching to the vehicle while possession of FOB, door will be automatically unlocked
(to the vehicle with “driver indicator – welcome function” only)

Automatic door lock after doors are closed.

- When driver is out of vehicle and walk away with FOB, door will locked automatically.
- just after auto door lock, auto door unlock is not operational. (after 15 seconds auto unlock is available)

How to set Auto door function and setting off the function

- Get into to vehicle then press Brake after closing door.

- while braking, press “ “ button on FOB, 2 times by 1 sec. interval then Auto door unlock function is set, to
set-off auto door unlock function, do the same as SET sequence.

* Notice : IF you set auto door unlock function without braking, this may cause Remote engine starting.
* Notice : When set off auto door unlock function, automatic door lock function will be deactivated as well,
so press trigger button on the door-catch upto 2seconds to lock the door.
* Notice : There is possibility of door locked even FOB is inside of vehicle for long time after the engine is shut off.
( In this case, please do not panic and unlock the door by putting password through trigger button on door-catch)

* When FOB’s battery is getting out or shut, auto door unlock function may have malfunction.
(Please replace Battery of FOB)
Functions – Emergency Door Unlock

How to unlock the door without possessing FOB

- This function enable driver to unlock doors without FOB by put passwords through door trigger button. In case of
emergency door unlock but when forgot to bring FOB, or when door is locked but FOB is inside of vehicle.

- Press trigger button on the door catch for seconds.

- Then there will be 3times of hazard light blinking, 2 times of horn honking, then start to put passwords.

1) Put 1st number by pressing trigger button, then check 1 time of Hazard light blinking, 1 time of Horn honking.
2) Put 2nd number by pressing trigger button , then check 1 time of Hazard light blinking, 1 time of Horn honking.
3) Put 3rd number by pressing trigger button , then check 1 time of Hazard light blinking, 1 time of Horn honking.
4) Put 4th number by pressing trigger button , then check 1 time of Hazard light blinking, 1 time of Horn honking.

Notice : If password is not correct, Doors will not be unlocked. Try again from beginning.
Functions – Emergency Door Unlock (Setting Passwords)

How to set passwords to unlock the doors without FOB

When set password, Door must be open and keep Start Button to ACC.

- Driver can input passwords up to 4 numbers among 1~9 numbers by pressing trigger button on the door catch.

- Open the door and put FOB inside of Vehicle.

- Able to input 4 numbers among 1~9 by pressing trigger button.

ex) If want to put 9, press trigger button 9 times.

- Press trigger button for seconds while door is open. Then there will be 3 times of hazard light blinks & 2 times
of horn honking. After this input passwords numbers immediately.
1) Put 1st password number then check 1 time of hazard light blink & 1 time of horn honking.
2) Put 2nd password number then check 1 time of hazard light blink & 1 time of horn honking.
3) Put 3rd password number then check 1 time of hazard light blink & 1 time of horn honking.
4) Put 4th password number then check 1 time of hazard light blink & 1 time of horn honking with door lock
& unlock action.

If checked door lock & unlock action, password input is correct. If not, please try again from beginning.

*** Some model may require little bit of different way for input passwords.
*** Never input password while door is closed, It may be locked during processing by original function of vehicle’s
security.
Functions – Turbo timer (Engine Idling after driving)

Turbo timer for Diesel / Turbo Charger Engine

- This function is useful for protection for Diesel/Turbo charge engine after driving.

- Driver get off from the vehicle with possession of FOB and close the door.

- Then there will be “beep” sound as vehicle notices that there is no FOB inside of vehicle.

- Press trigger button on the door catch 1 time after “Beep” then Turbo timer is activating for 90 seconds with
blinking hazard light.

- While engine idling, driver can open door by press trigger button or by FOB.

- If driver press brake with possessing FOB, engine will keep running.

- If engage gear without possessing FOB, engine will be shut off.

Notice: Must be checked that door locked and blinking of hazard lights on activating Turbo timer.
Functions – Smart Stopping

Function that enable to lock the doors while engine is ON

- This function is convenient when driver need to do small thing while don’t want to shut off the engine.

- When driver get off with possessing of FOB from the vehicle, while engine is ON,
there will be “Beep” by vehicle’s recognizing of FOB is out of vehicle.

- Press trigger button 2 times within 2 seconds after “Beep”, doors are locked with 2times of Hazard lights
blinking,
Horn 1 time. Smart Stopping last up to 15 minutes.

- While Smart stopping, driver can unlock the door by FOB or press trigger button as usual.

- When driver returned, should press Brake to keep ON the engine.

- Even driver is inside of vehicle, in case of no possession of FOB, when driver engage gear, engine will be
turned off.

- Cannot be used with Turbo timer continuously. (Please distinguish functions between Turbo Timer & Smart
Stopping)
Notice: Must be checked that horn honking(1time), door locked and a blinking of hazard lights on activating Smart Stopping function
General Notice driver should know before use MyKey Pro

- Do not try to do remote engine starting inside of vehicle, It may cause malfunction of system.

- Please remain double click timing for remote engine starting, at the exact interval. It may be different
slightly according to vehicle models.

- It may be different for “ “ click for remote engine start or auto door Set or Set-Off.
( Must press brake while Set or Set-off the auto door unlock / lock function, it may cause sudden remote engine starting)

- Password setting may be different for different vehicle models.

- Do not input password while vehicle’s door is closed, it may be locked by vehicle’s original security system
while pressing trigger button.

- For the memory seat, after MyKey-Pro installation, set Memory No. 2 as full dragged so that set Memory No.
1 shall be driver’s proper position. (Memory No. 2 is to be empty for MyKey-Pro’s function)

- Memory seat will be dragged as Memory No. 2 while remotely started, then will return to driver’s set position
when driver press brake.
1. 조정사항

1) 빠진 부분은 한글로 정리하여 삽입했습니다. 8P, 9P

2)영문으로 옮기시면 될 것 같습니다.

품질 보증은 2년이며 이 사항에 대하여는 문구를 넣어야 합니다.

2. AS 관련
- 저희 제품은 특성상 오배선 및 제품의 문제는 대응 메뉴얼이 있으며
메뉴얼들은 메일로 보내드립니다.

- AS에 관해서는 감각을 익히셔야 하며 시간이 필요합니다. 이에 대한

교육은 받으셔야 합니다.

- 이 후 전화상의 대응이 한결 수월해질 것입니다.

보시고 지우십시오