85W Dual Output Switching Power Supply RD-85 series

User’s Manual
■ Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105℃ long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty Bauar t gepruft
Sicherheit
egel ma ge
od
be wac
o s
g

SPECIFICATION
www. tuv.com
ID 2000000000

UL62368-1 BS EN/EN62368-1 IEC62368-1 TPTC004

MODEL RD-85A RD-85B

OUTPUT NUMBER CH1 CH2 CH1 CH2
DC VOLTAGE 5V 12V 5V 24V
RATED CURRENT 8A 4A 8A 2A
CURRENT RANGE Note.3 0 ~ 10A 0 ~ 5A 0 ~ 10A 0 ~ 2.5A
RATED POWER Note.6 88W 88W
RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 80mVp-p 120mVp-p
OUTPUT
VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3 ±2.0% ±5.0% ±2.0% ±5.0%
LINE REGULATION Note.4 ±0.5% ±1.0% ±0.5% ±1.0%
LOAD REGULATION Note.5 ±1.0% ±3.0% ±1.0% ±3.0%
SETUP, RISE TIME 500ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.) 100ms/230VAC 18ms/115VAC at full load
VOLTAGE RANGE 88 ~ 264VAC 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage)
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY(Typ.) 78% 80%
INPUT
AC CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC
INRUSH CURRENT (Typ.) COLD START 50A/230VAC
LEAKAGE CURRENT <2mA / 240VAC
110 ~ 150% rated output power
OVERLOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
CH1: 5.75 ~ 6.75V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP. -25 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)on +5V output
VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 7) EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020
MTBF 239.4Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 159*97*38mm (L*W*H)
PACKING 0.6Kg; 24pcs/15.4Kg/0.83CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. (In order to meet tolerance, it is recommended that CH1 load > 10% rated current.)
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6. Each output can work within current range. But total output power can't exceed rated output power.
7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
9. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:RD-85N-SPEC 2021-09-16
 85W Dual Output Switching Power Supply RD-85 series

Mechanical Specification Case No. 901C Unit:mm

152.5

7
3.5
1

2
9.5

65

84.5
97
8.2

5
3
6 2-M

.5
ψ3
4.5
24 78
159

6.5 150
9

Terminal Pin No. Assignment

18.5

Pin No. Assignment Pin No. Assignment

ψ

3.5

3-
38
3.5

18

M3
28.5

1 AC/L 4,6 DC OUTPUT COM

2 AC/N 5 DC OUTPUT +V2
3 FG 7 DC OUTPUT +V1
22 117

Block Diagram fosc : 60KHz

RECTIFIERS
& +V2
FILTER

EMI RECTIFIERS POWER RECTIFIERS +V1

I/P FILTER & &
SWITCHING COM
FILTER FILTER

DETECTION
FG
CIRCUIT
O.L.P. CONTROL
O.V.P.

Derating Curve Static Characteristics

100
100
90
80
80

60 70
LOAD (%)

LOAD (%)

60
40
50
20
40

-25 0 10 20 30 40 50 60 70 (VERTICAL) 88 95 100 115 120 140 160 180 200 220 240 264

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz

File Name:RD-85-SPEC 2021-09-16

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

MEAN WELL:
RD-85A RD-85B