Ø 354

101

DN110
Ø 160
Ø 203
HL Drains
13. Floor 13
 HL Floor drains

Basic information about design and installation

Floor drains serve as central drainage of floor Primusblue system ▲ Waterproofing:
surfaces. To reach a satisfying result, aesthe- The Primusblue is a combined odor trap with To avoid leakage water to get into the floor
tical and functional, the plumber has to care sealing water and mechanical odor barrier, construction, the floor drain has to be con-
for some important topics. The coordination which provides absolute odor-tightness and nected to the on-site waterproofing. Attention:
of the different craftsmen (designer, construc- even more protection against unpleasant Gaps between tiles are not waterproof! In
tion company, plumber, tiler..) is the biggest odors from the sewer. With a tightness at posi- most cases the waterproofing (mostly liquid
challange for the plumber. Therefore please tive pressure up to +800 pascal and negative compounds) is located directly under the tiles.
notice allready during planning and design, pressure up to 400 Pascal Primusblue offers HL floor drains are equiped with flanges, on
some topics: greater safety compared to conventional which the plumber may install the right sealing
water odor seals with 50 mm barrier water. kit. The installer, together with the tiler, should
▲ Function: Another benefit is the function of backflow decide, which. To apply the waterproofing
The question, how the drain is finally used, tightness up to a pressure of 0.5 mWs. The material directly on the flange, is not water-
decides allready during design of the drainage backflow of wastewater in the case of unfa- proof.
system the choise of the gully. Generally one vorably laid pipes (e.g. from the bathtub or
differs between permanent use (places, where during backwashing in the swimming pool) is ▲ Sound protection:
splashing water occures, e.g. shower) and effectively prevented. (ÖNORM B2501) Please see chapter „accessories“ on page 256
irregular use (e.g. as savety drain in laundry
rooms). ▲ Capacity: ▲ Installation:
The test procedure for evaluating the drain When the floor drain is mounted, the level of
▲ Stench trap: capacity for floor drains is made according the flange should be below the level of the
Especially at rarely used drain spots one has EN 1253-1: 2015 with 20 mm impounded screed, so that a sufficiant incline to the drain
to avoid, that stench rises from the sewage water above the grate. If floor drains are used is possible. Attention: The height of the drain
system. A classic solution is to use a drain for barriere-free showers, the plumber should body is not the minimum height of the screed.
with additional side inlet (HL300, HL304). A take care, that the flow rate is higher than the
regularely used drain spot (e.g. washing basin) water inlet from the shower, to avoid water ▲ Design:
makes sure, that the trap cannot become dry. running into the dry area of the bathroom. Depending on taste and function, you may
In this case the drain should be constructed chose different types of grates and extensions.
backwater save, so that the wastewater from The plumber should first talk to the enduser,
the basin cannot overflow on the floor. Also which one he prefers, as a subsequent change
the inlet should be siphoned in the drain is not allways possible.
itself. Another solution for this problem is the
wellknown drain-series „Primus“ of HL. These
drains have a normal water siphon and a Relevant standards/directives
mechanical trap. A floating body is part of a ÖNORM B2501.............. Drainage of buildings
normal water trap. When the water evaporates DIN 1986-100................. Drainage systems for buildings and estates
in the trap (or is sucked out by vacuum in the EN 12056........................ Gravity drainage systems inside of buildings
sewage system), the floating body sinks on the ÖNORM B2207.............. Tiling works
EN1253........................... Drains for buildings
mouth of the drain and closes it.

166
 Selection of the convenient drain
Selective criteria Requirements Product
horizontal outlet vertical outlet
Capacity To find the right choise, one has to know, up to 0,4 l/s → HL90PrD up to 0,5 l/s → Series HL80,
which maximum wastewater quantity up to 0,45 l/s → HL90PrBlue (-3000) Series HL310NPr
should be drained off. up to 0,5 l/s → Series HL510N, up to 0,67 l/s → Series HL310N
Series HL80.1, HL541(I) up to 0,8 l/s → HL3100Pr
Series HL300, HL304 from 1,25 l/s up to 1,4 l/s → HL3100
up to 0,8 l/s → HL540(I), HL5100Pr up to 1,8 l/s → Series HL317
up to 1 l/s → HL5100
up to 1,12 l/s → Series HL70
up to 1,5 l/s → HL72.1(N)
Existing floor At drains with horizontal outlet the floor
height height is an important criteria.

Floor construction concrete floor -

top edge of the screed Height of the drain body:
≥ 70 mm ≤ 90 mm Series HL90, HL541(i) = 62 mm
≥ 90 mm ≤ 110 mm Series HL510N = 79 mm,
≥ 90 mm ≤ 250 mm Series HL540 = 80 mm
≥ 110 mm ≤ 160 mm Series HL5100 = 97 mm
≥ 160 mm ≤ 180 mm Series HL72.1 = 150 mm
≥ 180 mm Series HL70 = 173 mm
Series HL80, HL310N → HL85N
At drains with vertical outlet the drain body Series HL3100 → HL8500 Series
lies on the concrete floor and therefore HL317 → HL350.1
mostly needs an extension element with
flange, to reach the top edge of the screed.
Waterproofing The use of a sealing kit, which fits to
the ­­on-site waterproofing, is absolutely
­neccessary for a watertight connection.
Kind and material of the waterproofing:
For under-tile waterproofings, e.g. Series HL70, HL80, HL90, HL300, HL310N, HL510N → HL83.M
2-component-epoxy resins Series HL72.1 and HL317 → HL84.M
HL540 and HL541 series → Waterproofing included!
Series HL3100 and HL5100 → HL8300.M

For EPDM-sheetings, based on bitumen, Series HL70, HL80, HL90, HL300, HL310N, HL510N → HL83
for bitumen coatings and for welding of Series HL72.1 and HL317 → HL84
bitumen sheetings Series HL3100 and HL5100 → HL8300

Welding of bitumen sheetings HL83H, HL8300.H

Series HL70......→ HL83H
Instead of series HL72.1 or HL317 → HL72.1H and HL317H
Series HL3100 and HL5100 → HL8300H

167
 HL Floor drains – Sectional drawings
Floor drain horizontal Tile covering
with integration into the
Tile adhesive
composite waterproofing
e.g. tiled shower Composite waterproofing
Screed

HL540 Impact sound insulation

Levelling fill

Concrete

Tile covering
Floor drain horizontal
Tile adhesive
with integration into the
composite waterproofing Composite waterproofing
2-part design with HL83.M
extension element HL85N Screed
Impact sound insulation

Levelling fill
HL85N
HL510N-3000

Concrete

Tile covering
Floor drain vertical with
integration in bitumen and Tile adhesive
composite waterproofing
Composite waterproofing
Screed
HL83.M
Impact sound insulation
HL3000.1 Levelling fill

HL85N Bitumen waterproofing

HL310NKH Concrete

168
 HL Floor drains – Installation

1. Fill in concrete and level to the height of the lid cover 2. Wait, until the concrete is set 3. Remove lid cover, clean flange and insert the gasket

4. Apply the waterproofing membrane 5. Fix the stainless steel ring by screwing 6. The sealing kit is below the concrete level

7. Apply the liquid waterproofing 8. Smooth the membrane 9. Apply the liquid waterproofing on the whole wet area.

10. The sealing kit is completely below the concrete 11. Cut the extension 12. Insert the extension without O-ring. Lay the tiles.
level

169
 HL Floor drains – Products – Overview

Drains

Product HL90Prblue HL90PrblueD HL510N(Pr) HL80.1 HL80.1C HL90Prblue-3020 HL300

Description Drain horizontal Drain horizontal Drain horizontal Drain 50/75 Drain 50/75 Drain horizontal DN40/50 Drain horizontal DN50
DN40/50 DN40, with fleece DN40/50 with conver- with polymere with side inlet
flange table ball-joint concrete collar
outlet and convertable
outlet
Function Extremly flat, for Especially for under- Standard drain, For horizontal Especially for Extreme flat with tilable With side inlet, which
flat floor construc- tile waterproofings, flat, also availa- and vertical epoxy resin floor grate and Primus blue trap cares for a full water trap.
tions with Primus with Primus blue trap ble with PRIMUS connection surfaces The integrated backwater
blue trap trap protector prefents foam to
leak through the grate.

Extensions

Product data
see chapter sealing
kits / extensions

Product HL340N HL3400 HL350 HL85N HL8500

Description Extension Extension Extension Extension with flange Extension with flange

Function For elongating the extension, For elongating the extension, For elongating the exten- For the adjustment of the drain For the adjustment of the
fits to drains of series HL90, fits to drains of series HL3100 sion, fits to drains of series to the waterproofing level, fits to drain to the waterproo-
HL510N, HL80, HL300, HL70, and HL5100 HL72.1 and HL317 drains of series HL90, HL510N, fing level, fits to drains
HL310N, HL304 HL80, HL300, HL70, HL310N, of series HL3100 and
HL304 HL5100

170
HL Floor drains – Products – Overview

HL510N(Pr)-3020 HL5100(Pr) HL310N(Pr)-3020 HL72.1N HL310N(Pr) HL3100(Pr) HL317

Drain horizontal Floor drain horizontal Drain vertikal DN50/75/110 Floor drain horizontal Floor drain vertical Ablauf senkrecht Floor drain vertical
DN40/50 DN50/75, high capacity DN75/110, high DN50/75/110 DN50/75/110 DN50/75/110/160
capacity

Standard drain with For high capacity With tilable grate and For high capacity For outlet pipes For outlet pipes below For outlet pipes below
tilable extension and reasons, also available optional PRIMUS trap reasons below the concrete the concrete floor, with the concrete floor, with
optional PRIMUS trap with PRIMUS trap floor, also available high capacity, also high capacity.
with PRIMUS trap available with PRIMUS
trap

HL350.1(.0) HL350.1H HL85NC HL3200

Extension with Extension with bitumen flange Extension with polymere concrete collar Extension with stainless steel frame and
Sealing flange grate

To adjust the drain to the waterproofing level, To adjust the drain to the level of For height adjustment of the drain to To change from standard extension to ex-
fitting to floor drain series HL72.1 and HL317 under-tile waterproofings, fitting to floor liquid waterproofings, fits to drain series tension with stainless steel frame, e.g. when
drain series HL72.1 and HL317 HL90,HL510N,HL80, HL300, HL70, HL310N you use „design“-grates. Fitting to floor drain
and HL304 series HL90, HL510N, HL80, HL300, HL70,
HL310N, HL304

171
 HL Floor drains – Products – Overview

Accessories

Product HL3020 HL37N HL3000 HL37NP HL38N HL39G HL3910 HL3911

Description Tilable extension Standard Extension „Klick- Extension with Round extension Cast iron exten- Extension „Klick- Extension
extension Klack“ PVC-collar sion Klack“ „Klick-Klack“ with
screwable grate

Function Extension fits Standard exten- Standard To connect PVC Extension with Usage with high Standard exten- Standard exten-
to drain bodies sion, fitting to extension with floor coverings, round cover load or to con- sion, fitting to sion, fitting to
HL70K-3020, floor drain series stainless steel fitting to floor plate, fitting to nect hot bitumen floor drain series floor drain series
HL80K-3020, HL90, HL510N, frame, fitting to drain series floor drain series floor coverings, HL3100 and HL3100 and
HL90K-3020, HL80, HL300, floor drain series HL90, HL510N, HL90, HL510N, fitting to floor HL5100 HL5100
HL300K-3020, HL70, HL310N, HL90, HL510N, HL80, HL300, HL80, HL300, drain series
HL304K-3020, HL304 HL80, HL300, HL70, HL310N, HL70, HL310N, HL90, HL510N,
HL310NK-3020 HL70, HL310N, HL304 HL304 HL80, HL300,
and HL304 HL70, HL310N,
HL510NK-3020 HL304

Sealing kits

Product data
see chapter sealing
kits / extensions

Product HL83.0 HL83 HL83.M HL83.H HL8300.0

Description Sealing kit without sheeting Sealing kit with EPDM Sealing kit with textile coated Sealing kit with bitumen collar Sealing kit without sheeting
sheeting membrane

Function For clamping of on-site For bitumen coatings and For under-tile waterproofings, For bitumen based water- For clamping of on-site
sheetings, fitting to floor drain EPDM sheetings, fitting fitting to floor drain series proofings or coatings, fitting sheetings, fitting to floor drain
series HL70, HL80, HL90, to floor drain series HL70, HL70, HL80, HL90, HL300, to floor drain series HL70, series HL3100 and HL5100
HL300, HL304, HL310N, HL80, HL90, HL300, HL304, HL304, HL310N, HL510N HL80, HL90, HL300, HL304,
HL510N HL310N, HL510N HL310N, HL510N

172
HL Floor drains – Products – Overview

HL66(Q) HL3928 HL3120 HL3121 HL3123 HL3124 HL3125 HL3127

Extension Extension with Design-grate Design-grate Design-grate Design-grate „Nil“ Design-grate Design-grate
design-grate „Quadra“ „Seine“ „Orinoco“ „Yukon“ „Primus Design“
„Hamam“
Stainless steel grate Extension for floor Stainless steel grate Stainless steel grate Stainless steel grate Stainless steel grate Stainless steel grate Stainless steel grate
with high request on drain with golden with high request on with high request on with high request on with high request on with high request on with high request on
design and stability, frame and grate, design and stability, design and stability, design and stability, design and stability, design and stability, design and stability,
fitting to floor drain design „Hamam“. fitting to floor drain fitting to floor drain fitting to floor drain fitting to floor drain fitting to floor drain fitting to floor drain
series HL72.1 and Fits to floor drain series HL90, series HL90, series HL90, series HL90, series HL90, series HL90,
HL317 series HL5100 and HL510N, HL80, HL510N, HL80, HL510N, HL80, HL510N, HL80, HL510N, HL80, HL510N, HL80,
HL3100. HL300, HL70, HL300, HL70, HL300, HL70, HL300, HL70, HL300, HL70, HL300, HL70,
HL310N, HL304 HL310N, HL304 HL310N, HL304 HL310N, HL304 HL310N, HL304 HL310N, HL304

HL8300 HL8300.M HL8300.H HL84.0 HL84 HL84.M

Sealing kit with EPDM Sealing kit with textile Sealing kit with bitumen Sealing kit without sheeting Sealing kit with EPDM Sealing kit with textile
sheeting coated membrane collar sheeting coated membrane

For bitumen coatings and For under-tile waterproo- For bitumen based water- For clamping of on-site For bitumen coatings and For under-tile waterproo-
EPDM sheetings, fitting to fings, fitting to floor drain proofings or coatings, fitting sheetings, fitting to floor EPDM sheetings, fitting to fings, fitting to floor drain
floor drain series HL3100 series HL3100 and HL5100 to floor drain series HL3100 drain series HL317 and floor drain series HL317 series HL317 and HL72.1
and HL5100 and HL5100 HL72.1 and HL72.1

173
 HL Floor drains – Products – Data
HL80.1 Floor drain with convertable outlet

Data
HL037Pr.1E
Capacity 0,5 l/s
Material PP,PE, stainless steel V2A HL037N.0E
Outlet DN50/75 cuttable, stepless
convertable from horizontal to Ø220
HL037N.2E
vertical, outlet pluggable and 123 x123
weldable HL01067D

12- 70
Extension 123 x 123 mm, cuttable in height
Grate Stainless steel grate 115 x 115 mm HL080.5E

DN75
90
Stench trap Height of water trap 50 mm
HL0300.0EN
Standard EN 1253 180

215

DN50
Load classification K 3 – max. 300 kg HL80K
Recommended for Floor drainage inside the building
Additional temperature-resistant up to 85 °C
information
HL-No. Dimension Weight EAN Piece/package
Including Supporting frame, lot cover 80.1 DN50/75 625 g +700813 1

HL80.1C Floor drain with polymere concrete collar

Data
HL037Pr.1E
Capacity 0,5 l/s
Material PP,PE, polymere concrete collar, HL037N.0E
stainless steel V2A
Outlet DN50/75 adjustable in length, HL3200
convertable from horizontal to
vertical, connector pluggable and
weldable
HL080.5E
Extension 123 x 123 mm, adjustable in length
Grate Stainless steel grate 115 x 115 mm
HL80CK
Stench trap Height of seal water 50 mm
HL0510NC.1E
Standard EN 1253
Load classification K 3 – max. 300 kg
Recommended for Under-tile waterproofings and
epoxy resin coatings
Additional temperature-resistant up to 85 °C
information
Including Supporting frame, lot cover

HL053N.1E

HL-No. Dimension Weight EAN Piece/package

80.1C DN50/75 6100 g +050802 1

174
HL80.1H Floor drain with bitumen collar

Data
HL037Pr.1E
Capacity 0,5 l/s
Material PP,PE, premounted bitumene
HL037N.0E
membrane, stainless steel V2A
Outlet DN50/75 adjustable in length,
HL037N.2E
convertable from horizontal to Ø 420
vertical, connector pluggable and 123 x 123
weldable
HL080.5E

12-70
Extension 123 x 123 mm, cuttable in height
Grate Stainless steel grate 115 x 115 mm

DN75
Stench trap Height of seal water 50 mm

93
HL0300.0EN
Standard EN 1253

DN50
180
Load classification K 3 – max. 300 kg

218
Recommended for Bitumen waterproofings
Additional temperature-resistant up to 85 °C
information
Including Supporting frame, lot cover HL-No. Dimension Weight EAN Piece/package
80.1H DN50/75 1195 g +701810 1

HL80.1R Floor drain with round cover plate

Data HL38N
Capacity 0,5 l/s
Material PP,PE, stainless steel V2A HL038.3E

Outlet DN50/75 adjustable in length,

convertable from horizontal to HL038N.4E
vertical, connector pluggable and
weldable
HL01067D
Extension Stainless steel frame Ø 133 mm,
cuttable in height
Grate Stainless steel cover plate HL080.5E
Ø 112 mm
Stench trap Height of seal water 50 mm
Standard EN 1253 HL0300.0EN

Load classification K 3 – max. 300 kg

Recommended for Barrier-free showers with round
cover plate
Additional temperature-resistant up to 85 °C
information
HL80K
Including Supporting frame, lot cover

HL-No. Dimension Weight EAN Piece/package

80.1R DN50/75 650 g +004591 1

175
 HL80.2 Floor drain with standpipe

Data
Capacity 0,5 l/s HL515

Material PP, PE
Outlet DN50/75 adjustable in length, HL080.7E
convertable from horizontal to
vertical, connector pluggable and
weldable
Extension 100 x 100 mm, cuttable in height HL01067D

12- 75
100
Grate 94 x 94 mm cover 100 x100
HL080.2ENWE
Stench trap Height of seal water 30 mm
Standard EN 1253 Ø220 HL080.6E

Load classification K 3 – max. 300 kg HL0300.0EN

Recommended for Brick-built bathtubs, longer 90
standpipe on request!
HL80K
215

180

DN75
DN50
Additional temperature-resistant up to 85 °C
information
Including Lot cover, standpipe HL515 with
10 cm
HL-No. Dimension Weight EAN Piece/package
80.2 DN50/75 535 g +700820 1

HL300 Floor drain with side inlet and backwater protector

Data
HL037Pr.1E
Capacity 0,5 l/s
Material PE, stainless steel V2A HL037N.0E
Outlet horizontal DN50,
side inlet DN40/50, Connections HL037N.2E
pluggable and weldable
Extension 123 x 123 mm, Ø200 HL01067D
cuttable in height 123 x123
HL0300.0EN
Grate Stainless steel grate 115 x 115 mm
12- 70

Stench trap Height of seal water 50 mm

Standard EN 1253 HL0300.6E
52

Load classification K 3 – max. 300 kg

123

Recommended for Central siphoning with side inlet,

which cares for water in the trap
DN50

DN40

Additional with backwater protector,

DN50

110 165
information temperature-resistant up to 85 °C HL300K
Including Supporting frame, lot cover
HL-No. Dimension Weight EAN Piece/package
300 DN50 935 g +703005 1

HL303K Floor drain body with 3 side inlets

Data
Capacity 0,5 l/s
Material PE
Outlet horizontal DN50,
3 side inlets, connections Ø100
pluggable and weldable
DN50

Grate with Accessories:

Plug HL306 or with Trap seal
DN40

assembly HL307
132-153
165

Stench trap Height of seal water 35 mm

95

Recommended for Central drainage and siphoning for

the whole bathroom
35

Additional no connection to the waterproofing

information
Including Lot cover HL-No. Dimension Weight EAN Piece/package
303K DN50 230 g +703036 1
176
HL304 Floor drain with 3 side inlets

Data
Capacity 0,5 l/s HL037Pr.1E
Material PE, stainless steel V2A
Outlet horizontal DN50,
3 side inlets DN40, connections HL037N.0E
pluggable and weldable
Extension 123 x 123 mm,
cuttable in height HL037N.2E

Grate Stainless steel grate 115 x 115 mm

Stench trap Height of seal water 50 mm
Standard EN 1253 HL01067D
Load classification K 3 – max. 300 kg
Recommended for Central drainage and siphoning of HL0300.0EN
the whole bathroom, the inlets care Ø200
for enough water in the trap 123 x123
Additional with backwater protector,

52 12- 70
information temperature-resistant up to 85 °C
Including Supporting frame, lot cover
HL0300.6E

71
DN50

110 95

DN40
HL304K

HL-No. Dimension Weight EAN Piece/package

304 DN50 795 g +703043 1

HL310N Floor drain

HL310N-3000 Floor drain like HL310N, but with stainless steel frame

Data HL310N
HL310N-3000
Capacity 0,67 l/s
Material PE, stainless steel V2A
Outlet DN50/75/110, HL037Pr.1E
vertical pluggable and weldable
Extension HL310N: 123 x 123 mm, HL037N.0E
cuttable in height
HL310N-3000: 121 x 121 mm,
„Klick-Klack-fixing system“,
cuttable in height HL0510.7E HL0510.7EKK
Grate Stainless steel grate 115 x 115 mm
Stench trap Height of seal water 50 mm
Standard EN 1253
HL037N.2E HL3200
Load classification K 3 – max. 300 kg
Recommended for Floor drainage with vertical HL01067D
connection
Additional temperature-resistant up to 85 °C
information
HL0300.0EN
Including Supporting frame, lot cover

HL310NK

HL-No. Dimension Weight EAN Piece/package

310N DN50/75/110 690 g +004638 1
310N-3000 DN50/75/110 735 g +016327 1
177
 HL310N-3020 Floor drain with tilable extension
HL310NPr-3020 like HL310N-3020, but with Primus trap

Data HL310N- HL310NPr-

3020 3020
Capacity HL310N-3020: 0,67 l/s
HL310NPr-3020: 0,5 l/s
Material PP,PE,ABS, stainless steel V4A
Outlet DN50/75/110, pluggable and HL03020.1E
weldable
Extension 132 x 132 mm with stainless steel
frame V4A, cuttable in height HL0510.7EKK HL2000KK
Grate Stainless steel frame and special
grate, to be filled with tiles Ø200
Size of grate: 104 x 104 x 12 mm 132 x132
104 x104
Stench trap HL310N-3020: Height of seal

12
HL03020.2E
water 50mm
HL310NPr-3020: Primus trap with

10- 80
50mm seal water HL01067D

22
Standard EN 1253, ÖNORM B2501
Load classification K 3 - max. 300 kg

62
Recommended for e.g. tiled showers, SPA-area
HL03020.0E

144
Additional Temperature-resistant up to 85°C

55
information
DN50
Including Lot cover DN75
DN110

HL310NK-3020

HL-No. Dimension Weight EAN Piece/package

310N-3020 DN50/75/110 740 g +034383 1
310NPr-3020 DN50/75/110 765 g +034390 1

HL310NG Floor drain with cast iron frame and grate A A

HL310NR Floor drain like HL310NG, but with round cover plate

Data HL310NG HL310NR

Capacity 0,67 l/s
Material PE, cast iron/PP,
stainless steel V2A HL037G.1E HL038N.3E
Outlet DN50/75/110,
vertical, pluggable and weldable
Extension HL310NG: 150 x 150 mm,
HL0510.7E
cuttable in height
HL310NR: Ø 133 mm,
cuttable in height
Ø 200
Grate HL310NG: 137 x 137 mm, Cast iron 150 x 150
HL310NR: Ø 112 mm, Stainless HL037G.2E HL038N.4E
steel
32-73

Stench trap Height of seal water 50 mm

HL01067D
Standard EN 1253
Load classification HL310NG: L15 – max. 1,5 t
HL310NR: K 3 – max. 300 kg
62

HL0300.0EN
Recommended for HL310NG: e.g. carparks, mastic
144

asphalt DN110

HL310NR: barrier-free showers

55

Additional temperature-resistant up to 85 °C DN50

information DN75

Including Lot cover HL310NK

HL-No. Dimension Weight EAN Piece/package

310NG DN50/75/110 2365 g +004652 1
310NR DN50/75/110 630 g +006038 1

178
HL310NPr Floor drain with Primus trap
HL310NPr-3000 like HL310NPr, but with stainless steel frame

Data HL310NPr
HL310NPr-3000
Capacity 0,5 l/s
Material PE
Outlet DN50/75/110, HL037Pr.1E
vertical, pluggable and weldable
Extension HL310NPr: 123 x 123 mm, HL037N.0E
cuttable in height
HL310NPr-3000: 121 x 121
mm, „Klick-Klack-fixing system“,
cuttable in height
HL2000 HL2000KK
Grate Stainless steel grate 115 x 115 mm
Stench trap Height of seal water 50 mm and Ø200
Primus (No stench, with or without
water) HL310NPr=123x123
HL310NPr-3000=121x121
Standard EN 1253, ÖNORM B2501 HL037N.2E HL3200
Load classification K 3 – max. 300 kg
Recommended for Floor drainage with vertical
connection HL01067D

Additional Floor drainage especially at

information unfrequent use, no stench with or

HL310NPr-3000=10-80
without water, refilling of water into

62
HL0300.0EN

HL310NPr=12-70
144
the trap is no longer neccessary!
Temperature resistant up to 85 °C DN110 55
Including Supporting frame, lot cover

DN50
DN75 HL310NK

HL-No. Dimension Weight EAN Piece/package

310NPr DN50/75/110 700 g +004676 1
310NPr-3000 DN50/75/110 760 g +016440 1

HL310NPrG Floor drain like HL310NG, but with Primus trap

HL310NPrR Floor drain like HL310NR, but with Primus trap

Data HL310NPrG
Capacity 0,5 l/s
HL310NPrR

Material PE, cast iron/PP, stainless steel V2A

Outlet DN50/75/110, HL037G.1E HL038N.3E
vertical, pluggable and weldable
Extension HL310NPrG: 150 x 150 mm,
cuttable in height
HL310NPrR: Ø 133 mm,
cuttable in height HL2000
Grate HL310NPrG: 137 x 137 mm,
Cast iron
HL310NPrR: Ø 112 mm, Ø 200
Stainless steel 150 x 150
HL037G.2E HL038N.4E
Stench trap Height of seal water 50 mm u. Primus
(No stench, with or without water)
32-73

Standard EN 1253, ÖNORM B2501 HL01067D

Load classification HL310NPrG: L15 – max. 1,5 t
HL310NPrR: K 3 – max. 300 kg
Recommended for HL310NPrG: e.g. carparks, mastic
HL0300.0EN
62

asphalt
HL310NPrR: barrier-free showers
144

DN110
Additional Floor drainage especially at
55

information unfrequent use, no stench with or

without water, refilling of water into DN50
the trap is no longer neccessary! DN75
Temperature resistant up to 85° C HL310NK
Including Lot cover
HL-No. Dimension Weight EAN Piece/package
310NPrG DN50/75/110 2365 g +004690 1
310NPrR DN50/75/110 590 g +006052 1

179
 HL3100 Floor drain with high capacity

Data
HL03910.1E
Capacity DN50: 1,25 l/s, DN75/110: 1,4 l/s
Material PE, stainless steel HL03900.0E
Outlet DN50/75/110,
vertical, pluggable and weldable HL05100.7E
Extension Stainless steel V4A, 145 x 145
mm, „Klick-Klack“-locking system,
cuttable in height HL03910.2E
Grate Stainless steel V2A, 138 x 138 mm
Stench trap Height of seal water 50 mm
HL01093D
Standard EN 1253
Load classification K 3 – max. 300 kg
Recommended for Floor drain with high capacity, e.g. HL03100.0E
„Raindance“
Additional with „Klick-Klack-fixing system“,
information temperature-resistant up to 85 °C
Including Supporting frame, lot cover HL3100K

HL-No. Dimension Weight EAN Piece/package

3100 DN50/75/110 1040 g +025428 1

HL3100Pr Floor drain with high capacity and Primus trap

Data
Capacity 0,8 l/s HL03910.1E
Material PE, stainless steel
HL03900.0E
Outlet DN50/75/110,
vertical, pluggable and weldable
Extension Stainless steel V4A, 145 x 145 HL2100
mm, „Klick-Klack“-locking system,
cuttable in height
Ø239
Grate Stainless steel V2A, 138 x 138 mm HL03910.2E
145x 145
Stench trap Height of seal water 50 mm and
Primus (No stench, with or without
8- 80

water) HL01093D
Standard EN 1253, ÖNORM B2501
Load classification K 3 – max. 300 kg
87

Ø152
Recommended for Floor drain with high capacity, e.g.
162

„Raindance“
HL03100.0E
75

Additional Floor drainage especially at

information unfrequent use, no stench with or
DN50
without water, refilling of water into
the trap is no longer neccessary! DN75
Temperature resistant up to 85 °C DN110
HL3100K
Including Supporting frame, lot cover
HL-No. Dimension Weight EAN Piece/package
3100Pr DN50/75/110 1079 g +025435 1

180
HL317 Floor drain vertical

Data
Capacity 1,8 l/s
HL0317.1E
Material PP, stainless steel V2A
Outlet DN50/75/110, vertical Ø300 HL0317.5E
Extension 150 х 150 mm, cuttable in height 150 x150
HL0317.2E
Grate Stainless steel grate 138 x 138 mm
Stench trap Height of seal water 50 mm HL01059D
Standard EN 1253

20- 70
Load classification K 3 – max. 300 kg

110
HL0317.3E

50
Recommended for Floor drain with high capacity
Additional temperature-resistant up to 95 °C
information
HL0317K
Including Lot cover
DN50 HL0317.4E
DN75
DN110
Ø160 HL317K

HL-No. Dimension Weight EAN Piece/package

317 DN50/75/110 1200 g +703173 1

HL317H Floor drain vertical with bitumen collar

Data
Capacity 1,8 l/s HL0317.1E
Material PP, stainless steel V2A
Outlet DN50/75/110 vertical HL0317.5E

Extension 150 х 150 mm, cuttable in height

HL0317.2E
Grate Stainless steel grate 138 x 138 mm
Ø500
Stench trap Height of seal water 50 mm Ø300 HL062B.3E
15- 65

150 x150
Standard EN 1253
Load classification K 3 – max. 300 kg
Recommended for Floor drain with high capacity HL0317.3E
117

Additional Bitumen waterproofings,

50

information temperature-resistant up to 95 °C
HL0317HK
Including Lot cover

DN50 HL0317.4E
DN75
DN110
HL317KH
Ø160

HL-No. Dimension Weight EAN Piece/package

317H DN50/75/110 1985 g +317110 1

181
 HL510N Floor drain
HL510N-3000 Floor drain like HL510N, but with stainless steel frame

Data HL510N
HL510N-3000
Capacity 0,55l/s with 20mm stowage height
0,40l/s with 10mm stowage height
Material PE, stainless steel HL037Pr.1E

Outlet DN40/50,
horizontal, pluggable and weldable HL037N.0E
Extension HL510N: 123 x 123 mm,
cuttable in height
HL510N-3000: 121 x 121 mm,
„Klick-Klack-fixing system“, HL0510.7E HL0510.7EKK
cuttable in height, stainless
steel V4A
Grate Stainless steel grate 115 x 115 mm,
stainless steel V2A HL037N.2E HL3200
Stench trap Height of seal water 50 mm
Standard EN 1253 HL01067D

Load classification K 3 – max. 300 kg

Recommended for Floor drainage with horizontal
HL0300.0EN
connection
Additional Sound protection acc. ÖNORM
information B8115-2 is reached together with
HL6200 sound insulation pad (see
chapter accessories).
HL510NK
Including Supporting frame, lot cover
HL-No. Dimension Weight EAN Piece/package
510N DN40/50 590 g +051007 1
510N-3000 DN40/50 725 g +016686 1

HL510N-3020 Floor drain with frame for tiles

HL510NPr-3020 Like HL510N-3020, but with PRIMUS trap

Data HL510N- HL510NPr-

HL510N-3020: 3020 3020
Capacity
0,50l/s with 20mm stowage height
0,45l/s with 10mm stowage height
HL510NPr-3020:
0,45l/s with 20mm stowage height HL03020.1E
0,40l/s with 10mm stowage height
Material PP,PE,ABS, stainless steel V4A
Outlet DN40/50 horizontal, pluggable and
HL0510.7EKK HL2000KK
weldable
Extension 132 x 132 mm with stainless steel
frame V4A, cuttable in height
Grate Stainless steel frame and special
grate, to be filled with tiles
Size of grate: 104 x 104 x 12 mm Ø200 HL03020.2E
Stench trap HL510N-3020: Height of seal 132 x132
water 50mm 104 x104
12

HL510NPr-3020: PRIMUS trap HL01067D

with 50mm seal water
22 10- 80

Standard EN 1253, ÖNORM B2501

Load classification K 3 - max. 300 kg
Recommended for e.g. tiled showers, SPA-area HL03020.0E
79

Additional Sound protection acc. ÖNORM

information B8115-2 is reached together with
DN40

DN50

HL6200 sound insulation pad (see

chapter accessories)
188
Including Lot cover HL510NK-3020

HL-No. Dimension Weight EAN Piece/package

510N-3020 DN40/50 730 g +034406 1
510NPr-3020 DN40/50 750 g +034413 1

182
A A
HL510NG Floor drain with cast iron frame and grate
HL510NR like HL510NG, but with round stainless steel cover plate

Data HL510NG HL510NR

Capacity 0,55 l/s
Material PE, cast iron/PP, stainless steel
V2A HL037G.1E HL038N.3E
Outlet DN40/50,
horizontal, pluggable and weldable
Extension HL510NG: 150 x 150 mm, HL0510.7E
cuttable in height
HL510NR: Ø 133 mm,
cuttable in height
Grate HL510NG: 137 x 137 mm,
Cast ironrost HL037G.2E HL038N.4E
HL510NR: Ø 112 mm Edelstahl
Stench trap Height of seal water 50 mm
HL01067D
Standard EN 1253
Load classification HL510NG: L15 – max. 1,5 t
HL510NR: K 3 – max. 300 kg
HL0300.0EN
Recommended for HL510NG: e.g. carparks, mastic
asphalt
HL510NR: barrier-free showers
Additional temperature-resistant up to 85 °C
information
Including Lot cover
HL510NK

HL-No. Dimension Weight EAN Piece/package

510NG DN40/50 2265 g +001965 1
510NR DN40/50 590 g +006076 1

HL510NPr Floor drain with Primus trap

HL510NPr-3000 like HL510NPr, but with stainless steel frame

Data HL510NPr
HL510NPr-3000
Capacity 0,50l/s with 20mm stowage height
0,35l/s with 10mm stowage height
Material PE, stainless steel HL037Pr.1E
Outlet DN40/50, horizontal, pluggable
and weldable
HL037N.0E
Extension HL510NPr: 123 x 123 mm,
cuttable in height
HL510NPr-3000: 121 x 121 mm,
„Klick-Klack-fixing system“,
cuttable in height, stainless HL2000 HL2000KK
steel V4A
Grate Stainless steel grate 115 x 115 mm,
stainless steel V2A
Stench trap Height of seal water 50 mm and HL037N.2E HL3200
Primus (No stench, with or without
water)
Standard EN 1253, ÖNORM B2501 HL01067D
Load classification K 3 – max. 300 kg
Recommended for Floor drainage with horizontal
connection HL0300.0EN
Additional Floor drainage especially at
information unfrequent use, no stench with or
without water, refilling of water into
the trap is no longer neccessary!
Sound protection acc. ÖNORM
B8115-2 is reached together with HL510NK
HL6200 sound insulation pad (see
chapter accessories). HL-No. Dimension Weight EAN Piece/package
510NPr DN40/50 690 g +004737 1
Including Supporting frame, lot cover 510NPr-3000 DN40/50 744 g +016563 1
183
 HL510NPrG Floor drain like HL510NPr, but with cast iron frame and grate
HL510NPrR like HL510NPrG, but with round stainless steel cover plate

Data HL510NPrG
Capacity 0,5 l/s
HL510NPrR
Material PE, cast iron/PP, stainless steel V2A
Outlet DN40/50,
horizontal, pluggable and weldable HL037G.1E HL038N.3E
Extension HL510NPrG: 150 x 150 mm,
cuttable in height
HL510NPrR: Ø 133 mm,
cuttable in height HL2000
Grate HL510NPrG: 137 x 137 mm,
cuttable in height
HL510NPrR: Ø 112 mm, cuttable
in height
Stench trap Height of seal water 50 mm and HL037G.2E HL038N.4E
Primus (No stench, with or without
water)
Standard EN 1253, ÖNORM B2501 HL01067D
Load classification HL510NPrG: L15 – max. 1,5 t
HL510NPrR: K 3 – max. 300 kg
Recommended for HL510NPrG: e.g. carparks, mastic
HL0300.0EN
asphalt
HL510NPrR: barrier-free showers
Additional Floor drainage especially at
information unfrequent use, no stench with or
without water, refilling of water into
the trap is no longer neccessary!
Sound protection acc. ÖNORM
B8115-2 is reached together with HL510NK
HL6200 sound insulation pad (see
chapter accessories).
Including Lot cover HL-No. Dimension Weight EAN Piece/package
510NPrG DN40/50 2440 g +004713 1
510NPrR DN40/50 690 g +006113 1

HL90Prblue Floor drain flat with Primus blue trap

HL90Prblue-3000 like HL90Prblue, but with stainless steel frame

Data HL90Prblue
HL90Prblue-3000
Capacity 0,45 l/s with 20 mm stowage height
0,4 l/s with 10 mm stowage height
Material PP, stainless steel V2A HL037Pr.1E
Outlet DN40/50, horizontal, pluggable
and weldable
Extension HL90Prblue: 123 x 123 mm, HL037N.0E
cuttable in height
HL90Prblue-3000: 121 x 121 mm,
„Klick-Klack-fixing system“, cuttable HL090.5E HL090.5EKK
in height, stainless steel V4A
Grate Stainless steel grate 115 x 115
mm, stainless steel V2A
Odor trap New Primus blue, combined
odor trap with sealing water HL037N.2E HL3200
and mechanical odor barrier
(absolutely odor-tight even without
HL01067D
water). Backflow-proof up to 50 cm
accumulation height
Standard EN 1253, ÖNORM B2501
Load classification K 3 – max. 300 kg HL0300.0EN
Recommended for Floor constructions < 100 mm
Additional Floor drainage especially at
information unfrequent use, no stench with or
without water, refilling of water into
the trap is no longer neccessary! HL90K
Sound protection acc. ÖNORM
B8115-2 is reached together with HL-No. Dimension Weight EAN Piece/package
HL6200 sound insulation pad (see 90Prblue DN40/50 510 g +050505 1
chapter accessories). 90Prblue-3000 DN40/50 564 g +050512 1
Hair catcher HL0541.6E available
as accessories!
Including Supporting frame, lot cover

184
HL90Prblue-3020 Floor drain with tilable extension and PRIMUS trap

Data
Capacity 0,5 l/s with 20 mm stowage height
0,45 l/s with 10 mm stowage height
Material PP, ABS, stainless steel V4A
Outlet DN40/50 HL03020.1E
Extension 132 x 132 mm with stainless steel
frame V4A, cuttable in height
Grate Stainless steel frame and special
grate, to be filled with tiles HL090.5EKK
Size of grate: 104 x 104 x 12 mm
Odor trap New Primus blue, combined
odor trap with sealing water
and mechanical odor barrier
(absolutely odor-tight even without HL03020.2E
water). Backflow-proof up to 50 cm
accumulation height
HL01067D
Standard EN 1253, ÖNORM B2501
Load classification K 3 - max. 300 kg
Recommended for e.g. tiled showers, SPA-area, with
floor levels < 100mm
Additional Sound protection acc. ÖNORM HL03020.0E
information B8115-2 is reached together with
HL6200 sound insulation pad (see
chapter accessories)
Hair catcher HL0541.6E available HL90K-3020
as accessories!
Including Lot cover HL-No. Dimension Weight EAN Piece/package
90Prblue-3020 DN40/50 570 g +050529 1

HL90PrblueD Floor drain with integrated fleece flange

HL90PrblueD-3000 like HL90PrblueD, but with stainless steel frame

Data HL90PrblueD
Capacity 0,45 l/s with 20 mm stowage height HL90PrblueD-3000
0,40 l/s with 10 mm stowage height
Material PP/PE, stainless steel
HL037Pr.1E
Outlet DN40, horizontal, pluggable and
weldable
Extension HL90PrblueD: 123 x 123 mm, HL037N.0E
cuttable in height
HL90PrblueD-3000: 121 x 121
mm, „Klick-Klack-fixing system“,
cuttable in height, stainless
steel V4A HL090.5E HL090.5EKK
Grate Stainless steel grate 115 x 115
mm, stainless steel V2A
Odor trap New Primus blue, combined
odor trap with sealing water HL037N.2E HL3200
and mechanical odor barrier
(absolutely odor-tight even without
water). Backflow-proof up to 50 cm
accumulation height
Standard EN 1253, ÖNORM B2501
Load classification K 3 – max. 300 kg HL090PrD.4E
Recommended for Floor constructions < 100 mm
Additional Floor drainage especially at
information unfrequent use, no stench with or
without water, refilling of water into
the trap is no longer neccessary!
Sound protection acc. ÖNORM HL90KD
B8115-2 is reached together with
HL6200 sound insulation pad (see
chapter accessories).
Hair catcher HL0541.6E available HL-No. Dimension Weight EAN Piece/package
90PrblueD DN40 812 g +050543 1
as accessories! 90PrblueD-3000 DN40 855 g +050550 1
Including Supporting frame, lot cover
185
 HL540 „Primus Drain“ Shower drain, MIN. HEIGHT 80 MM !
HL540I „Primus Drain“ Shower drain with individual tile hollow, MIN. HEIGHT 80 MM !

Data HL540 HL540I

Capacity 20 mm above drain level: HL0540.5E
HL540=0,8l/s; HL540i=0,6/s HL0540I
HL03910.1E
10 mm above drain level:
HL540=0,55l/s; HL540i=0,45l/s
Material PP/stainless steel, Frame: V4A
Grate HL540=V2A
HL03900.0E
Grate HL540i=V4A
Outlet DN50 horizontal HL0540.2E
Height from 8 - 20 cm adjustable
Standard EN 1253 HL2040I
Stench trap 5cm seal water, incl. Primus-trap,
no stench without seal water HL2040
Additional incl. removable trap inlet, sealing
information kit with textile coated membrane,
sound disconnected adjusting
angles, protection cover and lot
cover
Soundproofing tested HL0540.4E
Test certificate: www.hl.at
Installation The drain body might be fixed HL540K
on the floor with 3 metal angles HL0540.0E
and can be adjusted in height
afterwards. Advantage: maximum
sceed covering of the outlet pipe.
New: It is no longer necessary to
set the drain exactly on the right
height of the screed. After filling
in the screed, the salient nozzle is
cut by a saw. The sealing kit may
HL0540.3E
be inserted without any tools and
takes care of a safe connection
to the waterproofing. At the end
the extension is adjusted and set
into the drain. Please take care,
that the edges of the frame are
underlaid with tile glue to take
HL-No. Material Dimension Weight EAN Piece/package
Please also see maximum load.
540 PP/Stainless steel DN50 1533 g +039029 1
installation movie at
www. hl.at 540I PP/Stainless steel DN50 1898 g +039098 1
540-Quadra PP/Stainless steel DN50 1898 g +041817 1
540-Cut PP/Stainless steel DN50 1898 g +041800 1
540-Hamam PP/Stainless steel/ DN50 1898 g +041824 1
PVD-coated

HL066Q.1E, HL066C.1E, HL0540I, HL3928, HL3128E Design grates

Data
Quadra Cut Individuell
Material Stainless steel
Grate HL540I: 138x138mm massive,
Tile hollow: 74x74 mm,
depth 13mm
Load classification L - max. 1,5t, HL0540I - K3
HL066Q.1E HL066C.1E HL0540I
Recommended for Shower drain HL540 or floor drain
Hamam (Stainless steel/
series HL5100, HL3100, HL72.1 Hamam (Stainless steel)
PVD-coated)
and HL317

HL3928 HL3128E

HL-No. Material Dimension Weight EAN Piece/package

066Q.1E Stainless steel V2A 138 x 138 x 5 mm 607 g +013623 1
066C.1E Stainless steel V2A 138 x 138 x 5 mm 608 g +031283 1
0540I Stainless steel V4A 138 x 138 x 5 mm 638 g +039104 1
3928 Stainless steel V4A/V2A/PVD-coated 138 x 138 x 5 mm 608 g +031283 1
186 3128E Stainless steel V2A 138 x 138 x 5 mm 595 g +037094 1
 HL541 Primus blue Flat shower drain, MIN. HEIGHT 62MM!
HL541I Primus blue Flat shower drain with individual tile hollow, MIN. HEIGHT 62MM!
Data HL541 HL541I
Capacity 20 mm above drain level:
HL0541.5E HL0540I
HL541=0,5l/s; HL541i=0,45/s
10 mm above drain level: HL037Pr.1E
HL541=0,4l/s; HL541i=0,4l/s
Material PP/stainless steel, Frame: V4A
Grate HL541=V2A
Grate HL541i=V4A HL037N.0E
Outlet DN40/DN50 horizontal
HL0541.2E
Height from 62 - 200 (230) mm
Standard EN 1253
Load classification K3 - max. 300 kg
Odor trap New Primus blue, combined HL2020
odor trap with sealing water and
mechanical odor barrier (absolutely
odor-tight even without water).
Backflow-proof up to 50 cm
accumulation height
Additional Incl. removable trap inlet, sealing HL0541.4E
information kit with fleece laminated memb-
rane, adjustable fixing angles, hair
catcher, lot cover and protection
cover. HL541K HL0541.0E
Installation The drain body might be fixed
on the floor with 3 metal angles
and can be adjusted in height
afterwards. Advantage: maximum
sceed covering of the outlet pipe.
New: It is no longer necessary to
set the drain exactly on the right
height of the screed. After filling
in the screed, the salient nozzle is
cut by a saw. The sealing kit may HL0541.3E
be inserted without any tools and
takes care of a safe connection
to the waterproofing. At the end
the extension is adjusted and set
into the drain. Please take care,
Please also see that the edges of the frame are
installation movie and underlaid with tile glue to take HL-No. Material Dimension Weight EAN Piece/package
movie „function of maximum load. HL541 PP/Stainless steel DN40/50 - +047642 1
Primus blue“ HL541I PP/Stainless steel DN40/50 - +047659 1
at www.hl.at
HL541-Quadra PP/Stainless steel DN40/50 - - 1

HL0541I, HL3120, HL3121, HL3122, HL3123, HL3124, HL3125, HL3127 Design grates

Daten
Material Stainless steel V4A
Grate Stainless steel grate 115 x 115 mm
Load classification L – max. 1,5 t HL3120 HL3121 HL3122
Recommended for Floor drain series HL70, HL80,
HL300, HL304, HL310N, HL510N,
HL90 combined with extensions
HL3200 or HL3210
HL0541I: HL541
HL3123 HL3124 HL3125
115 x 115 5

HL0541I HL3127

HL-No. Dimension Weight EAN Piece/package

3120 115 x 115 mm 425 g +015412 1
3121 115 x 115 mm 425 g +015429 1
3122 115 x 115 mm 425 g +015443 1
3123 115 x 115 mm 425 g +015443 1
3124 115 x 115 mm 425 g +015450 1
3125 115 x 115 mm 425 g +015467 1
3127 115 x 115 mm 430 g +029037 1
0541I 115 x 115 mm 800 g +048304 1
187
 HL5100 Floor drain with high capacity

Data
Capacity 1,0 l/s
HL03910.1E
Material PE, stainless steel
Outlet DN50/75,
horizontal, pluggable and weldable
Extension Stainless steel V4A, 145 x 145 HL03900.0E
mm, „Klick-Klack“-locking system,
cuttable in height
Grate Stainless steel V2A, 138 x 138 mm
HL05100.7E
Stench trap Height of seal water 50 mm
Standard EN 1253
Load classification K 3 – max. 300 kg
HL03910.2E
Recommended for e.g. barrier-free showers with high
volume (Raindance)
Additional with stainless steel frame, Sound
information protection acc. ÖNORM B8115-2 HL01093D
is reached together with HL6200
sound insulation pad (see chapter
accessories).
Including Supporting frame, lot cover HL03100.0E

HL5100K

HL-No. Dimension Weight EAN Piece/package

5100 DN50/75 1025 g +025442 1

HL5100Pr Floor drain with high capacity, with PRIMUS trap

Data
Capacity 0,8 l/s
Material PE, stainless steel HL03910.1E
Outlet DN50/75,
horizontal, pluggable and weldable HL03900.0E
Extension Stainless steel V4A, 145 x 145
mm, „Klick-Klack“-locking system,
cuttable in height HL2100
Grate Stainless steel V2A, 138 x 138 mm
Stench trap Height of seal water 50 mm and
PRIMUS (No stench, with or HL03910.2E
without water)
Standard EN 1253, ÖNORM B2501
Load classification K 3 – max. 300 kg HL01093D
Recommended for e.g. barrier-free showers
with high volume (Raindance)
Additional with stainless steel frame, Floor HL03100.0E
information drainage especially at unfrequent
use, no stench with or without
water, refilling of water into the trap
is no longer neccessary! Sound
protection acc. ÖNORM B8115-2
is reached together with HL6200
sound insulation pad (see chapter
accessories).
HL5100K
Including Supporting frame, lot cover
HL-No. Dimension Weight EAN Piece/package
5100Pr DN50/75 1069 g +025459 1

188
HL72.1N Floor drain
HL72.1 like HL72.1, but with plastic grate

Data HL72.1N HL72.1

Capacity 1,5 l/s
Material PP, stainless steel V2A
HL0317.1E HL072.1E
Outlet DN75/110
HL0317.5E
Extension 150 х 150 mm,
cuttable in height
Grate HL72.1: Plastic­grate
138 x 138 mm, HL0317.2E
HL72.1N: Stainless steel grate
138 x 138 mm
HL01059D
Stench trap Height of seal water 60 mm
Standard EN 1253
Load classification K 3 – max. 300 kg
Recommended for e.g. barrier-free showers with with Ø300

20- 70
high volume (Raindance) 150 x150 HL072.3E
Additional temperature-resistant up to 95 °C
information
Including Lot cover and Sand trap

DN110
80
150

HL0317.4E
DN75
60

HL72.1K

HL-No. Dimension Weight EAN Piece/package

72.1N DN75/100 1330 g +107216 1
72.1 DN75/100 1330 g +710720 1

HL72.1HN Floor drain with bitumen collar

HL72.1H Floor drain with bitumen collar and plastic grate

Data HL72.1HN HL72.1H

Capacity 1,5 l/s
Material PP, stainless steel V2A
HL0317.1E HL072.1E
Outlet DN75/110
HL0317.5E
Extension 150 х 150 mm, cuttable in height
Grate HL72.1H: Plastic­grate
138 x 138 mm,
HL0317.2E
HL72.1HN: Stainless steel grate
138 x 138 mm
Stench trap Height of seal water 60 mm HL062B.3E
Standard EN 1253
Load classification K 3 – max. 300 kg Ø500
Recommended for e.g. barrier-free showers with high Ø300
20- 70

volume (Raindance) 150x 150

HL072.3E
Additional temperature-resistant up to 95 °C
information
Including Lot cover and Sand trap
80

DN110
150

HL0317.4E
DN75

HL72.1KH
60

HL-No. Dimension Weight EAN Piece/package

72.1HN DN75/100 2200 g +072118 1
72.1H DN75/100 2086 g +997213 1

189
 HL Floor drains – Accessories – Data
HL37N Standard extension

Data HL037Pr.1E
Material PP, stainless steel V2A
123 x 123
Extension PP-Frame 123 x 123 mm, HL037N.0E
extension cuttable in height
Grate Stainless steel grate 115 x 115 mm HL037N.2E

10
90
Load classification K 3 – max. 300 kg
Recommended for Drain bodies of series HL70, HL80,
HL300, HL304, HL310N, HL510N, Ø 110
HL90 HL01067D

Including Supporting frame

HL-No. Dimension Weight EAN Piece/package
37N Ø 110 mm / 123 x 123 mm 350 g +015221 1

HL37N.1
HL37N.1 Extension with water trap
HL37NPr
HL37NPr Extension with PRIMUS trap
HL37FPrblue Extension with flat Primus blue trap
Data HL37N.1 HL37NPr
HL37FPrblue
Material PP, stainless steel V2A
Extension PP-Frame 123 x 123 mm, HL037Pr.1E
extension cuttable in height
Grate Stainless steel grate 115 x 115 mm HL037Pr.1E
Stench trap HL37N.1: Water trap
HL37NPr: PRIMUS trap HL037N.0E
HL37FPrblue:
Primus blue trap „flat“
HL0510.7E HL2000
Load classification K 3 – max. 300 kg
123 x 123
Recommended for Drain bodies of series HL310N HL090.5E
and HL510N
HL037N.2E
Including Supporting frame
10
90

Ø 110
HL01067D

HL-No. Dimension Weight EAN Piece/package

37N.1 Ø 110 mm / 123 x 123 mm 380 g +015245 1
37NPr Ø 110 mm / 123 x 123 mm 405 g +015269 1
37FPrblue Ø 110 mm / 123 x 123 mm 402 g +050536 1

HL3000 Extension system „Klick-Klack“ with stainless steel frame

HL3011 Extension system „Klick-Klack“ with stainless steel frame, screwed

Data HL037Pr.1E
121 x121
22

Material PE, stainless steel

6

HL037N.0E
Extension Stainless steel frame 121 x 121
mm, extension cuttable in height, HL3200
stainless steel V4A
100

Grate Stainless steel grate 115 x 115 mm,

stainless steel V2A
Load classification K 3 – max. 300 kg Ø110 HL01067D

Recommended for Drain bodies of series HL70, HL80,

HL300, HL304, HL310N, HL510N, HL-No. Dimension Weight EAN Piece/package
3000 Ø 110 mm / 121 x 121 mm 340 g +015313 1
HL90 3011 Ø 110 mm / 121 x 121 mm 340 g +032624 1
Including Supporting frame

190
HL3000.1 Extension „Klick-Klack“, including water trap
HL3000.1
HL3000Pr
HL3000Pr Extension „Klick-Klack“, including PRIMUS trap
HL3000FPrblue
HL3000FPrblue Extension, including Primus blue trap - flat

Data HL3000.1 HL3000Pr

HL3000FPrblue
Material PE, stainless steel
Extension Stainless steel frame 121 x 121
mm, extension cuttable in height,
HL037Pr.1E
stainless steel V4A
Grate Stainless steel grate 115 x 115 mm,
stainless steel V2A HL037N.0E
Stench trap HL3000.1: Water trap
HL3000Pr: PRIMUS trap HL0510.7EKK HL2000KK
121 x 121
HL3000FPrblue:

22
6
Primus blue trap „flat“ HL090.5EKK
Load classification K 3 – max. 300 kg HL3200
Recommended for Drain bodies of series HL310N
100
and HL510N
Including Supporting frame
Ø 110 HL01067D

HL-No. Dimension Weight EAN Piece/package

3000.1 Ø 110 mm / 121 x 121 mm 425 g +015337 1
3000Pr Ø 110 mm / 121 x 121 mm 450 g +015351 1
3000FPrblue Ø 110 mm / 121 x 121 mm 446 g +050574 1

HL3020 Tilable extension

Data
Material PP, stainless steel V4A
Extension 132 x 132 mm with stainless steel
frame, cuttable in height
HL03020.1E
Grate Stainless steel frame and special
132 x132
grate, to be filled with tiles; Size of
grate: 104 x 104 x 12 mm 104 x104
12
27

Load classification K 3 - max. 300 kg

Recommended for e.g. tiled showers, SPA-area
Including Lot cover
118

Fits for all drain bodies with higher

lot cover HL70K-3020, HL80K-
3020, HL90K-3020, HL300K-3020, HL01067D
HL304K-3020, HL310NK-3020, Ø110 HL03020.2E
HL510NK-3020

HL-No. Dimension Weight EAN Piece/package

HL3020 Ø 110 mm / 132 x 132 mm 350 g +034253 1

HL37NP Extension with PVC frame and collar A A

Data
185 x185 HL037Pr.1E
Material PP/PVC, stainless steel V2A
121 x121
Extension PVC frame and collar HL037NP.2E
4,5
1,5

185 x 185 mm / 121 x 121 mm,

Extension cuttable in height
Grate Stainless steel grate 115 x 115 mm
110

Load classification K 3 – max. 300 kg

Recommended for PVC floor coverings, for gluing
HL01067D
PVC coverings directly on the
collar, fits to all floor drains of Ø110 HL340N
series HL70, HL80, HL300, HL304,
HL310N, HL510N, HL90 HL-No. Dimension Weight EAN Piece/package
37NP Ø 110 mm / 121 x 121 mm 340 g +022762 1

191
 HL37NP.1 Extension with PVC collar and frame, including water trap
HL37NPPr Extension with PVC collar and frame, including PRIMUS trap

Data HL37NP.1 HL37NPPr

Material PP/PVC, stainless steel V2A
Extension PVC frame and collar HL037Pr.1E
185 x 185 mm / 121 x 121 mm,
Extension cuttable in height
185 x185
Grate Stainless steel grate 115 x 115 mm
121 x121

4,5
HL0510.7E HL2000

1,5
Stench trap HL37NP.1: Water trap
HL37NPPr: PRIMUS trap HL037NP.2E
Load classification K 3 – max. 300 kg

110
Recommended for PVC floor coverings, for gluing HL340N
PVC coverings directly on the
collar, fits to all floor drains of HL01067D
Ø110
series HL310N and HL510N
HL-No. Dimension Weight EAN Piece/package
37NP.1 Ø 110 mm / 121 x 121 mm 342 g +022805 1
37NPPr Ø 110 mm / 121 x 121 mm 342 g +022830 1

HL38P Extension for connection to PVC- and rubber floor coverings

Data HL038P.1E
Material PP/ABS, stainless steel V2A Schnitt A-A
HL038P.3E

min. 50
Extension Plastic frame 138,5mm Ø138
Grate Stainless steel grate V2A 115mm
Trap Water trap with 50mm water height
HL038P.2E
Load classification K 3 – max. 300 kg

126
50

Recommended for clamping of PVC- or rubber floor HL038P.4E

coverings from 1-4 mm, fits for
drain series HL70, HL80, HL300, Ø110
HL304 HL310N and HL510N

HL-No. Dimension Weight EAN Piece/package

38P Ø 110 mm / Ø 115 mm A650 g A +036097 x

HL38N Round extension

Data
HL038.3E
Material PP, stainless steel V2A
Extension Stainless steel frame Ø 133 mm, HL038N.4E
extension cuttable in height
Grate Stainless steel cover plate
Ø 112 mm
Load classification K 3 – max. 300 kg HL01067D
Recommended for tiled showers, fitting to floor drain
series HL70, HL80, HL90, HL300, HL-No. Dimension Weight EAN Piece/package
HL304 38N Ø 110 mm / Ø 133 mm 160 g +004362 1

HL38N.1 Round extension with water trap

HL38NPr Round extension with PRIMUS trap

Data HL38N.1 HL38NPr

HL038N.3E
Material PP, stainless steel V2A
Extension Stainless steel frame Ø 133 mm,
extension cuttable in height
HL0510.7E HL2000
Grate Stainless steel cover plate
HL038N.4E
Ø 112 mm
Stench trap HL38N.1: Water trap
HL38NPr: PRIMUS trap
Load classification K 3 – max. 300 kg
HL01067D
Recommended for tiled showers, fitting to floor drain
series HL310N and HL510N HL-No. Dimension Weight EAN Piece/package
38N.1 Ø 110 mm / Ø 133 mm 435 g +015498 1
38NPr Ø 110 mm / Ø 133 mm 465 g +005994 1
192
HL39G Extension with cast iron frame and grate

Data
150 x 150

16
HL037G.1E

8
Material PP, cast iron

30
Extension Cast iron 150 x 150 mm, extension HL037G.2E
cuttable in height

95
Grate Cast iron 137 x 137 mm
Load classification L15 bzw. A15 – max. 1,5 t Ø 110
HL01067D
Recommended for Mastic asphalt, carparks; Drain
bodies of series HL70, HL80,
HL300, HL304, HL310N, HL510N, HL-No. Dimension Weight EAN Piece/package
HL90 39G Ø 110 mm / 150 x 150 mm 2025 g +000647 1

HL3910 Extension for HL3100 and 5100 series

Data HL03900.0E
Material PP, stainless steel V2A 145x 145

22
HL03910.1E
Extension Stainless steel frame V4A
145 x 145 mm, extension cuttable HL03910.2E
in height

100
Grate Stainless steel grate V2A
138 x 138 mm
Load classification K 3 – max. 300 kg
Ø146 HL01093D
Recommended for Drain bodies of series HL3100 and
HL5100
HL-No. Dimension Weight EAN Piece/package
Including Supporting frame 3910 Ø 146 mm / 145 x 145 mm 467 g +025534 1

HL3910.1 Extension for series 60 Plus, including water trap

HL3910Pr Extension for series 60 Plus, including PRIMUS trap

Data HL3910.1 HL3910Pr

Material PP, stainless steel
Extension Stainless steel frame V4A HL03900.0E
145 x 145 mm, extension cuttable
in height
Grate Stainless steel grate V2A 138 x HL03910.1E
138 mm 145x 145
22

Stench trap HL3910.1: Water trap

HL05100.7E HL2100
HL3910Pr: PRIMUS trap
HL03910.2E
100

Load classification K 3 – max. 300 kg

50

Recommended for Drain bodies of series HL3100 and

HL5100
Including Supporting frame Ø146
HL01093D

HL-No. Dimension Weight EAN Piece/package

3910.1 Ø 146 mm / 145 x 145 mm 592 g +025541 1
3910Pr Ø 146 mm / 145 x 145 mm 630 g +025558 1

HL3911 Extension for series 60 Plus with screwable grate

Data HL03911.3E

Material PP, stainless steel HL03900.0E

Extension Stainless steel frame V4A 145x 145
22

HL03911.1E
145 x 145 mm, extension cuttable
in height
HL03911.2E
Grate Stainless steel grate V2A 138 x
100

138 mm
Load classification K 3 – max. 300 kg
Recommended for Drain bodies of series HL3100 and Ø146
HL5100 HL01093D

Including Supporting frame

HL-No. Dimension Weight EAN Piece/package
3911 Ø 146 mm / 145 x 145 mm 470 g +028252 1

193
 HL3928 Extension „HAMAM“ for floor drain series HL3100 and HL5100 145 x145
138 x138

22
Data 145 x145
HL03900.0E
138 x138

22
Material PP, stainless steel

100
Extension Brass plated stainless steel V4A HL3128
Ø146

100
frame 145 x 145mm
Grate Brass plated stainless steel V2A HL03928.1E
Ø146
138 x 138 mm
Load classification L 15 - max. 1,5 t A A

Recommended for Floor drain series HL3100 and

HL5100 A A
HL01093D

HL-No. Dimension Weight EAN Piece/package

3928 Ø 146 mm / 145 x 145 mm 776 g +034796 1

HL3910G Extension cast iron for floor drain series HL3100 and HL5100

Data
Material PP, Cast iron HL03910G.1E

Extension Cast iron frame 190 x 190mm,

height 45 - 80 mm HL03910G.2E
Grate Cast iron grate 175 x 175mm
Load classification B - 12,5 t
Recommended for Car parks, warehouses, garbage
rooms, mastic asphalt; fits for HL01093D
drain bodies of series HL3100(T)
and HL5100(T)
HL-No. Dimension Weight EAN Piece/package
3910G Ø 146 mm /190 x 190 mm 5400 g +048793 1

HL66, HL66Q, HL66.1 Extensions with screwable grate

Data HL66 HL66.1 HL66Q

Material PP, Stainless steel
Extension Stainless steel frame V2A, 150 x 150

150 x 150 mm, extension cuttable

in height
15

Grate HL66 Screwable stainless steel

grate V4A 138 x 138 mm HL066.1E HL066.2E HL066Q.1E
205

HL66Q Design grate V4A

138 x 138 mm „Quadra“
HL66.1 Anti-slip grate V4A 138 x
138 mm, stainless steel, screwable
Ø 145
Load classification L 15 – max. 1,5 t
Recommended for Drain bodies of series HL72.1 and
HL066.3E HL066Q.3E
HL317

HL-No. Dimension Weight EAN Piece/package

66 Ø 145 mm / 150 x 150 mm 915 g +700660 1
66Q Ø 145 mm / 150 x 150 mm 1070 g +013609 1
66.1 Ø 145 mm / 150 x 150 mm 1000 g +702664 1

194
HL66.3 Extension with stainless steel grate
HL66.4 Extension with plastic grate

Data HL66.3 HL66.4

Material HL66.3: PP, Stainless steel V2A
HL66.4: PP
Extension PP-Frame 150 x 150 mm,
Extension cuttable in height
Grate HL66.3: Stainless steel grate
HL0317.1E HL072.1E
138 x 138 mm
HL66.4: Plastic grate 138 x 138 mm
Load classification K 3 – max. 300 kg 150 x 150

Recommended for Drain bodies of series HL72.1 and

HL317

90
HL0317.2E

Ø 145

HL-No. Dimension Weight EAN Piece/package

66.3 Ø 145 mm / 150 x 150 mm 352 g +014545 1
66.4 Ø 145 mm / 150 x 150 mm 238 g +014569 1

HL3110, HL03910.3E Stainless steel grate V4A

Data
Material Stainless steel V4A
Grate HL3110:
Stainless steel grate 115 x 115 mm
HL03910.3E:
Stainless steel grate 138 x 138 mm
Load classification K 3 – max. 300 kg
Recommended for chlorinated sewer, e.g. in
swimming pools

HL-No. Dimension Weight EAN Piece/package

3110 115 x 115 mm 162 g +015634 1
03910.3E 138 x 138 mm 255 g +025916 1

195
 HL3120, HL3121, HL3122, HL3123, HL3124, HL3125, HL3127 Design grates

Data
Material Stainless steel V2A
Grate Stainless steel grate 115 x 115 mm
Load classification L – max. 1,5 t HL3120 HL3121 HL3122
Recommended for Floor drain series HL70, HL80,
HL300, HL304, HL310N, HL510N,
HL90 combined with extensions
HL3200 or HL3210

HL3123 HL3124 HL3125

115 x 115 5

HL3127

HL-No. Dimension Weight EAN Piece/package

3120 115 x 115 mm 425 g +015412 1
3121 115 x 115 mm 425 g +015429 1
3122 115 x 115 mm 425 g +015443 1
3123 115 x 115 mm 425 g +015443 1
3124 115 x 115 mm 425 g +015450 1
3125 115 x 115 mm 425 g +015467 1
3127 115 x 115 mm 430 g +029037 1

196