RA 10 030B/03.

95

Gear Pump Model G2 (Series 40B)

For Flange Mounting RA
with SAE Threaded Ports
10 030B/03.95
…3600 PSI …1.37 in3/rev.
Sizes 4 to 22
(250 bar) (22.4 cm3/rev.)

– Heavy duty construction for industrial applications

– Sleeve bearings for long life
– Long seal life, even at maximum temperatures
– Single block bearings
– Innovative hydrostatic compensation feature

R 7644/29
Model 1 PF 2 G2-40B/...RR 19 MR

Functional Description

Hydraulic pumps, model G2, are self-priming, external gear Rotation of the gears creates a void at the suction inlet (6). Fluid
pumps. Applicable to 3600 PSI (250 bar), these fixed displacement trapped in the gear roots is transported to the pressure port (7). This
pumps provide flow to operate hydraulic circuits. Consisting of merging of fluid creates flow, which reflects a pressure signal as a
housing (1), mounting flange (2), drive shaft (3), bearing blocks (4), result of load forces. As evident by the cross-section, any void
sleeve bearings (5), and fluid ports (6)(7). G2 series gear pumps created at the suction inlet will immediately be replaced by
are designed to handle the rigors of industrial use. reservoir fluid. To enhance smooth performance, a small volume of
load-pressurized-fluid is needed to aid in internal lubrication.

5
3 8

6 7
6 Suction inlet
7 Pressure outlet
8 Drive gear
2 4 1 9
9 Driven gear

Symbol

Single pump
P

1
RA 10 030B/03.95
Ordering Code

1 PF 2 G2 – 4xB / R 19 M R *
Series 40B = 40B Futher details
(40B to 49B, externally interchangeable) in clear text

Displacement Size R= Mounting SAE-A 2 bolt

0.24 in3/rev (4.0 cm3/rev) 4 = 004 3.25" (82.5 mm) pilot
0.34 in3/rev (5.5 cm3/rev) 5 = 005
0.50 in3/rev (8.2 cm3/rev) 8 = 008 M= Buna seals
0.67 in3/rev (11.0 cm3/rev) 11 = 011
19 = SAE straight threaded ports
0.99 in3/rev (16.2 cm3/rev) 16 = 016
1.37 in3/rev (22.4 cm3/rev) 22 = 022

Direction of rotation (viewed on shaft end)

Clockwise =R
Counter-clockwise =L

Splined shaft SAE-A 5/8" (9T 16/32 DP) =R

Technical Data (For applications outside these parameters, please consult us)

Hydraulic Fluid: Petroleum oils to data sheet RA 07 075 Drive connection: Flexible coupling,
Maximum degree of fluid contamination: for other types of drive, please consult us
Class 19/16, according to ISO 4406. Therefore, we recommend Installation position: Optional
a filter with a minimum retention rate of ß 20 ≥ 100. Direction of rotation: Either*
(For longer life, we recommend class 18/15, achievable with a
filter ß10 ≥ 100. *Pumps may only rotate in the direction specified by model code
Fluid temperature range: 5 to 176 °F (–15 to 80 °C) Weights: see table for individual pump weights
Ambient temperature range: 5 to 140 °F (–15 °C to +60 °C)
Viscosity range: 60 to 1400 SUS (10 to 300 mm2/s)
(recommended), 4640 SUS (1000 mm2/s) maximum start
viscosity

Size 4 5 8 11 16 22
Displacement in3/rev (cm3/.rev) 0.24 (4.0) 0.34 (5.5) 0.50 (8.2) 0.67 (11.0) 0.99 (16.2) 1.37 (22.4)
Inlet pressure range (absolute) pabs min 10.3 PSAI (0.7 bar) to pabs max 43.5 PSIA (3.0 bar)
Max. continuous pressure PSI 3625 3625 3625 3625 3625 2500
(bar) (250) (250) (250) (250) (250) (175)
Peak pressure PSI 3990 3990 3990 3990 3990 2950
(bar) (275) (275) (275) (275) (275) (200)
Max. speed at continuous pressure rpm 4000 4000 4000 3000 2000 2000
Min. speed at p = 2610 PSI (180 bar) rpm 1200 1200 1000 1000 800 800
Min. speed rpm 1400 1400 1400 1200 1000 1000

2
 RA 10 030B/03.95
Flow and performance data (average values)

Flow vs pressure and required power (Pa),

Displacement
at 1750 rpm, v = 150 SUS (36 mm2/s) and t = 122 °F (50 °C)
Size in3/rev.
(cm3/rev) Pressure PSI 145 725 1450 2175 2538 2900 3045 3626
(bar) (10) (50) (100) (150) (175) (200) (210) (250)
GPM 1.9 1.88 1.85 1.77 1.82 1.74 1.72 1.72
Qeff
0.25 (L/min) (7.20) (7.10) (7.00) (6.70) (6.90) (6.60) (6.50) (6.50)
004
(4.5) HP 0.60 1.76 2.71 3.77 4.40 5.03 5.28 6.28
Pa
(kW) (0.45) (1.31) (2.02) (2.81) (3.28) (3.75) (3.94) (4.68)
GPM 2.38 2.35 2.32 2.30 2.27 2.25 2.22 2.19
Qeff
0.34 (L/min) (9.00) (8.90) (8.80) (8.70) (8.60) (8.50) (8.40) (8.30)
005
(5.5) HP 0.54 1.78 3.06 4.60 5.36 6.17 6.44 7.68
Pa
(kW) (0.40) (1.33) (2.28) (3.43) (4.00) (4.60) (4.80) (5.73)
GPM 3.91 3.88 3.86 3.86 3.83 3.75 3.75 3.72
Qeff
0.5 (L/min) (14.80) (14.70) (14.60) (14.60) (14.50) (14.20) (14.20) (14.10)
008
(8.6) HP 0.83 2.44 4.20 6.28 7.34 8.38 8.80 10.47
Pa
(kW) (0.62) (1.82) (3.13) (4.68) (5.47) (6.25) (6.56) (7.81)
GPM 5.15 5.12 5.07 5.07 5.05 4.99 4.99 4.94
Qeff
0.68 (L/min) (19.50) (19.40) (19.20) (19.20) (19.10) (18.90) (18.90) 18.70)
011
(11.3) HP 1.01 2.49 5.00 7.51 11.74 10.00 10.50 12.50
Pa
(kW) (0.75) (1.86) (3.73) (5.60) (8.76) (7.46) (7.83) (9.32)
GPM 7.40 7.37 7.34 7.34 7.29 7.24 7.24 7.21
Qeff
0.99 (L/min) (28.00) (27.90) (27.80) (27.80) (27.60) (27.40) (27.40) (27.30)
016
(16.2) HP 1.58 3.96 7.91 11.87 13.85 15.84 16.63 19.79
Pa
(kW) (1.18) (2.95) (5.90) (8.85) (10.33) (11.81) (12.40) (14.76)
GPM 10.20 10.17 10.14 10.14 10.12
Qeff
1.37 (L/min) (38.60) (38.50) (38.40) (38.40) (38.30)
022
(22.4) HP 1.72 5.15 10.94 14.83 15.26
Pa
(kW) (1.28) (3.84) (8.16) (11.06) (11.38)

Noise level: n = 1450 rpm, ν = 150 SUS (36 mm2/s) t = 122 °F (50 °C)

Noise is dependant on pump displacement, pressure, and drive speed

n = 950 rpm n = 1450 rpm
P
Size Size
PSI (bar)
004 005 008 011 016 022 004 005 008 011 016 022
72 (5) 57.0 62.5 59.0 66.5 65.5 65.5 63.0 63.0 60.5 65.5 71.5 74.0
725 (50) 56.5 62.0 58.0 65.5 68.5 67.5 63.0 63.0 62.5 64.5 69.5 69.5
1450 (100) 56.0 61.5 59.5 65.0 67.5 64.5 63.5 64.0 62.0 67.0 70.5 70.6
2175 (150) 56.0 60.5 60.5 64.0 66.5 65.5 63.5 63.5 63.0 68.0 70.5 72.5
2900 (200) 56.5 61.0 60.5 64.5 66.0 66.5 63.5 65.0 63.5 69.5 71.0 73.0
3626 (250) 57.5 61.0 60.5 65.0 66.0 63.5 64.0 63.0 67.0 67.5
Note: Measurements to DIN 45 635 in an anechoic chamber, distance to pump = 3.28 ft. (1 m).

3
RA 10 030B/03.95
Dimensions, type SAE 5/8" spline shaft and SAE-A 2 bolt mounting: dimensions in inches (mm)

L2
1.22 L1
(31) 5 6
Ø 0.45
13 4.19 (11.5)
0.91 (106.5)
(23) Ø 0.94
(24)
1.87
0.64 (47.5)
0.63
(16.25)
(16)
Ø 3.25
(82.55h8) B A
A B
4.57
(116)
Shaft
SAE A - 5/8"
3.39
9 teeth 16/32 DP 10 7 8 9
(86)
0.24 5.12
(6) (130)
0.37
(9.5)

5 Rotation arrow, counter-clockwise 9 Suction – when counter-clockwise rotation

6 Rotation arrow, clockwise 10 Pressure – when counter-clockwise rotation

7 Suction – when clockwise rotation 13 Spline shaft, SAE 5/8". “t” = 0.0982
Torque may not exceed 81 lb-ft (110 Nm)
8 Pressure – when clockwise rotation

7 8
Suction Pressure
Weight
Size L1 L2 SAE Thread SAE Thread
Unf. Unf. lbs (kg)
004 1.61 (41.00) 3.33 (84.50) 7/8" – 14 7/8" – 14 5.95 (2.7)
005 1.64 (41.75) 3.39 (86.00) 7/8" – 14 7/8" – 14 5.95 (2.7)
008 1.73 (44.00) 3.56 (90.50) 7/8" – 14 7/8" – 14 6.17 (2.8)
011 1.81 (46.00) 3.72 (94.50) 1-1/16" – 12 1-1/16" – 12 6.61 (3.0)
016 1.95 (49.50) 4.00 (101.50) 1-1/16 – 12 1-1/16" – 12 6.83 (3.1)
022 2.13 (54.00) 4.35 (110.50) 1-1/16" –12 1-1/16" – 12 7.71 (3.5)

Note: The 1 PF 2 G2-40B/… is intended to replace the 1 PF 2 G2-4X/… (see RA 10 030). Please review dimensional
information when replacing or retrofitting from 1 PF 2 G2-4X/… to 1 PF 2 G2-40B/….

Mannesmann Rexroth Corporation

Rexroth Hydraulics Div., Industrial, 2315 City Line Road, Bethlehem, PA 18017-2131 Tel. (610) 694-8300 Fax: (610) 694-8467
Rexroth Hydraulics Div., Mobile, 1700 Old Mansfield Road, Wooster, OH 44691-0394 Tel. (330) 263-3400 Fax: (330) 263-3333
4 All rights reserved - Subject to revision
Printed in U.S.A.