PDF-A 0033-07

Metering pumps
LK series
 Applicable to the many diverse needs of chemical
Accurate transfer of strong acid
Proportional feeding of additive
Automatic dilution of chemical liquid
Chemical liquid concentration control
Automatic process control related to pH
Replenishing of chemicals
Accurate quantity coating of coating material
Liquid sampling
Accurate quantity spraying
Metering set-up
Pressurized transfer or filtering of various types of slurries

LK-32VC LK-32VCH LK-32VCU LK-21S6 LK-21TC

1
 Metering pumps

feeding

Iwaki's systematic LK series metering pump consists of the worm gear type dual-
cam driving section, which is compact yet rigid and reliable, and wet-end materials
of which there are seven types for various applications.
With long and market-proven experience, Iwaki has employed state-of-the-art pump
technologies in the development of an ideal type of chemical feeding pump which
has advantages such as quality, performance, ease of operation and cost
efficiency.
The LK series is suitable for many chemical liquid feeding processes used in a wide
range of fields, including water treatment, chemicals, fabrics, paper mill, food
processing, and medicine.

Various types and materials

Nine types (IWAKI original motor) and eight general purpose motor types are
available to suit each user's needs in accordance with feeding rate from small to
large capacity. Also, material variation has been improved. Selection of the pump
material most suitable for the applied liquid is possible with seven different types
available.

High performance and application-oriented versatile design

Discharge accuracy (stability) is within ±2% FS. Reliability is considerably
enhanced through efforts to improve the linearity of the stroke / discharge ratio as
well as the dispersion between stroke.
Three types of joints flange, hose and union joints are standardized for the
connections. The optimum piping system can be selected. (Only with 0.2kW IWAKI
original motor type)

LK-C86VC LK-B65VC LK-B75S4

2
 Construction

Pump heads Drive component Motor Stroke adjustment

Drive from the gear reduction The head of the LK series is the All of the standard models Accurate and reliable stroke
unit is directly transmitted to the dual-cam system driving employ totally enclosed setting is possible with the
diaphragm. This type of section with a highly reliable, outdoor-use motors which are micrometer type dial of the
metering pump is economical built-in worm gear type speed vertically mounted to save springback type stroke
and simple with a high degree reducer. The compact and rigid space. The 0.2kW type is an adjustment mechanism. An
of versatility. With the mechanism is a result of the IWAKI original motor, which is electric servo unit for automatic
employment of moulded PVC design goal to achieve installed in the small models of process control, such as flow,
pump-head, and with the new maximum wear resistance in the LK series. Besides the pressure, pH, temperature, and
standardisation of three types continuous operation. In standard 200V, other voltages concentration can be arranged
of connections using flanges, addition to the worm gear which are available. The LK series according to the user's needs.
hose, or union joints (0.2kW is designed with a considerably pumps of LK-F, LK-A, LK-B,
Electric servo system
type), not only a saving in parts large module ratio, the material and LK-C can be installed with Specifications
cost but also improved flexibility is aluminium bronze, and a general-purpose motors, • Input signal :
of installation has been taper roller bearing is used at including those for different DC4 - 20mA (or 1 - 5V)
realized. The three main pump the end of the worm gear for the voltage levels and explosion- • Power source :
head materials are PVC, efficient transmission of motor proof specifications. Body AC100V 50/60Hz; other
voltage types available
stainless steel, or fluororesin. power to the pump section. A configurations of the LK series Voltage fluctuation ±10%
The most suitable type for the fully enclosed oil bath are available in five types. They • Motor output :
application can be selected lubrication system is employed are an IWAKI original motor LK (0.2kW) 15W
from a total of seven different to permit outdoor installation. type frame and the general- LK-A, B, C 40W
materials. A wide range of The durability in continuous purpose motor type frames, F,
chemicals, such as acid, operation over a long period of A, B and C. Detection terminal
pH, Temperature, Humidity, Flow,
alkaline, organic solvent, slurry, time is also excellent. Density, Pressure Liquid quantity, etc.
and high-temperature liquids, is
Adjustment meter
covered by the series.
Positioner

LK-A type
with electric servo unit

3
 Metering pumps

Specifications
Capacity Max. Pressure Stroke speed Efective Max. Connection Note 3 Motor Approx net
L/min MPa spm diaphragm stroke output weight
Model Flange Union Hose
dia. length kW kg
Note 5
Note 1 Note 2
mm mm (JIS10K) mm
50Hz 60Hz PVC SUS 50Hz 60Hz mm Note 4 PVC SUS
LK-11 0.020 0.024 ø22 1.5
48 58 ø4 x ø9
21 0.050 0.060 15A (PVC) 12 14
ø30 2.0
22 0.10 0.12 96 116 (PVC) 0.2
1.0 1.5 VP16
31 0.25 0.30 48 58 (Three phase)
ø60 2.5 (PVC)
or 12 17
32 0.50 0.60 96 116 JIS16K ø12 x ø18
(SUS) (PVC) 0.25
45 0.85 1.00 48 58 (Single phase)
ø72 6.0 14 21
47 1.7 2.0 0.8 96 116
55 2.8 3.3 0.5 48 58
ø100 10 25A – – 16 26
57 6.0 7.2 0.3 96 116
LK-A55 2.8 3.3 1.0 48 58
ø100 10 25A 63 80
A57 6.0 7.2 0.7 96 116 – – 0.4
A65 9.0 10.8 0.3 48 58 ø138 17.5 40A 70 73
B65 9.0 10.8 0.5 0.7 ø138 17.5 40A 100 100
48 58 – – 0.75
B75 13.3 16.0 0.5 ø150 20 50A 105 105
C76 20 24 0.5 ø150 50A 120 120
72 86
C86 33 40 20 – – 1.5
0.3 ø205 65A 140 155
C87 45 54 96 116
Note 1: The capacity is the value when maximum discharge pressure is applied (with pure water at room temperature). The value may be lager than indicated in the table if the discharge pressure is lower.
As for the liquid conditions pumped and performance. refer to the technical information of this catalogue.
Note 2: The maximum discharge pressure of LK-A models are restricted to 0.7MPa for A55, 0.5MPa for A57 and 0.2MPa for A65 when IEC standard 0.37kW motor is adopted.
Note 3: PVDF-made TC hose connection is available only with 11 to 22 type (Order-based production). VS type connection is different in some models from standard.
Note 4: The LK type is equipped with Iwaki original flange motor. The standard is 200V 3-phase, totally enclosed fan-cooled outdoor type.
Other motors for different voltages, explosion-proof motors, or single-phase motors are available.
LK-F, LK-A, B and C are to be installed with general purpose flange motors.
Note 5: The weight is the value when installed with a totally enclosed fan-cooled outdoor motor.
• Standard accessory : A siphon preventing valve, strainer and 4m PVC tube are furnished to hose connection type of simplex LK-11 to LK-45 VH or VC A base is furnished to all LK-A, LK-B and LK-C models.
For LK-(F) 11 to LK-(F) 57 models, the base may be supplied optionally.
• Coating color : A39-60D (JPMA) (However, the motors for LK-F/A/B/C use the maker's standard color.)
• Duplex type : LK-11 to 47 type include duplex types with a special-use integrated drive section.

Materials
LK-11 to LK-57 LK-A55 to LK-C87 Type VC VH VS4 VS TC S6 S4
(Flange type) (Flange type)
Application Acids Alkalines Viscosity and Slurry Strong acids Solvents
Applicable type 11 to 87 11 to A57 A65 to C87 11 to C87 11 to B65 11 to A57 A65 to C87
2 1: Pump head PVC PVDF SUS316 SCS13
2 3
2: Valve ball CE HC SUS304 HC / SUS304 Alumina ceramic HC SUS304
3
6
6 3: Valve Type11 to 32 FKM EPDM PVC SUS304 FKM SUS316 SUS304
seat Type41 to 84 PVC SUS304 PVDF SUS316 SUS304
1 1
4: O ring FKM EPDM FKM –
5
5: Valve gasket PTFE PTFE
6: Diaphragm PTFE + EPDM
4 5
Typical chemical Material symbols
VC: Sulfuric acid, Hydrochloric acid, Sodium hypochlorite PVDF: Poly vinylidene fluoride resin
4 VH, VS4: Caustic soda, Coagulant. Calcium hydroxide (low density) SCS13: Stainless-cast steel equivalent to SUS304
VS: Calcium hydroxide, Highmolecular coagulant CE: Ceramic
TC: Concentrated sulfuric acid, Hydrofluoric acid, Mixed acid FKM: Fluoro rubber
S6, S4: Organic solvent, Paper making chemicals EPDM: Ethylene propylene rubber
HC: Hastelloy C276

Note 1: Materials of the VS type valve balls are HC for 11 to A57 type and SUS304 for B65 to C87 type.
As for the connection, which is different in some models from standard,
Note 2: A stainless steel pump SE type for latex emulsion is available (LK-31 to 57 type)

4
 Pump identification

1 2 3 4 5 6 7 8 9 10

Item LK (IWAKI original motor type) LK-F / A / B / C (JEM or IEC motor type)
1 Simplex / Duplex None : Simplex, 2 : Duplex (special drive section:LK-11 to 47) None : Simplex
2 Series name L series : Mechanical driven diaphragm type
3 Drive section None : IWAKI original motor type 0.2kW / 0.25kW F : 0.25 or 0.37 kW (for IEC), 0.4kW, A : 0.4kW, B : 0.75kW, C : 1.5kW
First digit : Diaphragm (pump head size)
4 Type No.
Second digit : Speed-reducing gear ratio 1 • 5 : 1/30, 2 • 7 : 1/15, 6 : 1/20
5 Material symbol Refer to the material table (Ex. VC, VH, VS4, VS, TC, S6, S4)
6 Joint None : Flange, U : union (LK-11 to LK-47), H : hose (LK-11 to LK-47)
7 Motor output 02 : 0.2kW, 03 : 0.25kW (single phase) 04 : 0.4kW, 07 : 0.75kW, 15 : 1.5kW
8 Special motor – F : Inverter motor (Note : General-purpose motors have no explosion-ploof symbol.)
9 Servo unit E : With electric servo unit
10 Special symbol S : Special specification other than standard.
Note 1 : This table dose not introduce the standard combination. Please contact us for details.
Note 2 : In case of pump without motor installation, the above item 7 and 8 are not indicated.

Dimensions (in mm)

Dimensions may be changed without prior notice for the purpose of product improvement.
Be sure to carry out installation work with the most recent and detailed drawings. which are available upon request

LK-11 to LK-57 (Original motor type) LK-A55 to LK-C87 (General purpose motor type)
2-JIS10K mAFF
2-JIS10K mA 2-JIS10K mA 2-VP, m 2-m
(320)

(H)
a

a
b

100 4-ø9 C 85 20
120 2-m 126 4-ø12
b

d (L) c d 30
f 20
e
Flange type Flange type Union type Hose type g
PVC SUS PVC PVC (L)

Hose type PVC Union type PVC Flange type PVC Flange type SUS PVC SUS Note 2
Model Model
L a b c m L a b c m L a b c d m L a b c m L a b c L a b c H d e f g m
LK-1 274 146 23 95 274 240 70 95 16 274 264 86 95 89 15 272 141 20 92 15 LK-A5 476 325 -29 119 473 320 -32 108 547 180 240 260 300 25
2 274 164 32 95 274 258 79 95 16 274 282 95 95 89 15 272 151 25 92 15 A6 532 599 108 154 533 431 24 164 547 180 240 260 300 40
3 277 224 62 97 Note 277 318 109 97 16 277 342 117 97 89 15 277 184 42 97 15 B6 595 599 90 164 605 431 6 174 594 240 300 310 350 40
4 281 244 62 99 1 281 338 119 99 16 281 362 135 99 89 15 283 261 80 101 15 B7 599 600 90 167 610 465 23 178 594 240 300 310 350 50
5 – – – – 298 314 107 114 25 298 338 125 114 97 25 295 320 109 111 25 C7 599 600 90 167 610 465 23 178 601 240 300 310 350 50
47VS – – – – 291 272 86 99 25 281 308 104 99 97 25 – – – – – C8 605 647 114 173 609 633 107 177 601 240 300 310 350 65
Note 1: Connection size LK-1 and LK-2 ø4mm x ø9mm, LK-3, LK-4 and LK-1 to LK-4 VS type ø12mm x ø18mm. Note 2: These dimensions are common between PVC pump head and SUS pump head.
For information of TC type, please contact IWAKI or nearest distributor.

LK-F1 to F5 (General purpose motor type)

2-JIS10K mA 2-VP, m 2-m

Hose type PVC Union type PVC Flange type PVC Flange type SUS
Model
L a b c m L a b c m L a b c d m L
a b c d m
(579)

LK-F1 274 146 177 87 274 240 130 87 16 363 272 114 87 89 15 332 156 180 85 60 15
a

2 274 164 168 87 Note 274 258 121 87 16 363 290 105 87 89 15 332 166 175 85 60 15
3 277 224 138 89 1 277 318 91 89 16 366 350 75 89 89 15 337 201 158 90 60 15
4 281 243 128 92 281 337 81 92 16 370 369 65 92 89 15 343 270 120 94 60 15
200

5 – – – – – 298 314 93 107 25 395 350 75 107 97 25 399 368 90 104 104 25
b

d d 47VS – – – – – 281 272 114 92 25 378 308 96 92 97 25 – – – – – –

(L) (L) C 100 25 Note 1: Connection size LK-1 and LK-2 ø4mm x ø9mm, LK-3, LK-4 and LK-1 to LK-4 VS type ø12mm x ø18mm.
15 240 For information of TC type, please contact IWAKI or nearest distributor.
270 2-JIS10K mA 150
4-ø11
(L)

Flange type Flange type Union type Hose type

SUS PVC PVC PVC

5
 Metering pumps

Optional accessories
Siphon preventing valve Model BVC-1P L- H BVC-1P - H
Applicable capacity Up to 1L/min
Setting pressure 0.05 - 0.3MPa 0.3 - 0.8MPa
Material PVC, FKM (EPDM)
Connection mm Inlet 4 x 9, 12 x 18
(Applicable tube diameter) Outlet PT3/8 and PT1/2
: Symbol for material of O-ring ("V" for FKM, "E" for EPDM)

Air chamber Applicable Setting Connection

Body Model capacity pressure Nominal size Weight
L MPa JIS10K flange kg
A-1V 1.0 2
A-2V 2.0 Common for 15A - 25A 2.5
PVC A-5V 5.0 0.5 4.5
N40A-10V(2)-F 10 40A 16
N50A-20V(2)-F
* 20 50A 26
A-05S6-( )
* 0.5 10, 15, 20A 3
A-1S6-( ) 1.5 15, 20, 25A 5
SUS316 A-5S6-( ) 5.0 25, 40A 12
0.9
A-10S6-( ) 10 40, 50A 15
A-20S6-( ) 20 50, 65A 29
A-36S6-( ) 36 65A 55

* :: Material for O-ring 10V / 20V for CR, 10V2 / 20V2 for FKM
Symbol for material of O-ring ("V" for FKM, "E" for EPDM)
( ) : Symbol for connection (10, 15, 20, 25, 40, 50 or 65)
PVC, A type PVC, N type SUS, A type SUS, A type Note1: The weight is the value of the product only. (The weight of liquid applied is not included.)
Note2: Rigid PVC chamber may deteriorate with ultraviolet ray or the applied chemical liquid over a long
period of time.The chamber should be replaced every three years to guarantee safety.

Relief valve and back pressure valve

PVC type SUS type

List of relief valve List of back pressure valve

Max. Setting Connection Max. Setting Connection
capacity pressure Nominal size Weight capacity pressure Noeminal size Weight
Body Model Body Model
L/min MPa JIS10K flange kg L/min MPa JIS10K flange kg

RV-1P -4H 1.0 0.3 - 0.8 ø4 x ø9 PVC Hose 0.2 BV-1P -4H 0.005 - 1.0 0.3 - 0.8 ø4 x ø9 PVC Hose 0.2
RV-1P -12H 1.0 0.3 - 0.8 ø12 x ø18 PVC Hose 0.2 BV-1P -12H 0.005 - 1.0 0.3 - 0.8 ø12 x ø18 PVC Hose 0.2
RV-1P -15 1.0 0.3 - 0.8 15A 0.5 BV-1P -15 0.005 - 1.0 0.3 - 0.8 15A 0.5
RV-1P -20 1.0 0.3 - 0.8 20A 0.5 BV-1P -20 0.005 - 1.0 0.3 - 0.8 20A 0.5
RV-1P B-15 1.0 0.8 - 1.0 15A 0.5 BV-1P L-4H 0.005 - 1.0 0.05 - 0.3 ø4 x ø9 PVC Hose 0.2
RV-3P-15 3.0 0.3 - 1.0 15A 0.6 BV-1P L-12H 0.005 - 1.0 0.05 - 0.3 ø12 x ø18 PVC Hose 0.2
RV-3P-20 3.0 0.3 - 1.0 20A 0.6 BV-1P L-15 0.005 - 1.0 0.05 - 0.3 15A 0.5
RV-3P-25 3.0 0.3 - 1.0 25A 0.9 BV-1P L-20 0.005 - 1.0 0.05 - 0.3 20A 0.5
RV-3P -12H 3.0 0.3 - 1.0 ø12 x ø18 PVC Hose 0.4 BV-3P -12H 0.03 - 1.0 0.1 - 0.8 ø12 x ø18 PVC Hose 0.4
RV-3P -12P 3.0 0.3 - 1.0 ø12 x ø16 PE Hose 0.4 BV-3P -12P 0.03 - 1.0 0.1 - 0.8 ø12 x ø16 PE Hose 0.4
PVC
RV-3P -13E 3.0 0.3 - 1.0 ø13 x ø20 PE Hose 0.4 BV-3P -13E 0.03 - 1.0 0.1 - 0.8 ø13 x ø20 PE Hose 0.4
PVC
RV-7V-20 7.5 0.3 - 0.8 20A 3 BV-3N -12H 0.03 - 3.0 0.1 - 0.3 ø12 x ø18 PVC Hose 0.4
RV-7V-25 7.5 0.3 - 0.8 25A 3.5 BV-3N -15 0.03 - 3.0 0.1 - 0.3 15A 0.6
RV-7VB-20 7.5 0.8 - 1.0 20A 3 BV-3N -20 0.03 - 3.0 0.1 - 0.3 20A 0.6
RV-7VB-25 7.5 0.8 - 1.0 25A 3.5 BV-3N -25 0.03 - 3.0 0.1 - 0.3 25A 0.9
RV-25V-25 25 0.3 - 0.8 25A 4 BV-7V-20 0.2 - 7.5 0.05 - 0.8 20A 3
RV-25V-40 25 0.3 - 0.8 40A 4 BV-7V-25 0.2 - 7.5 0.05 - 0.8 25A 3.5
RV-25V-50 25 0.3 - 0.8 50A 5 BV-25V-25 2 - 25 0.1 - 0.8 25A 4
N50RV-5V-F 50 0.15 - 0.5 50A 18 BV-25V-40 2 - 25 0.1 - 0.8 40A 4
N50RV-5V2-F 50 0.15 - 0.5 50A 18 BV-25V-50 2 - 25 0.1 - 0.8 50A 5
N65•50RV-5V-F 70 0.15 - 0.5 65A 18 N50BV-5V-F 2.5 - 50 0.15 - 0.5 50A 18
N65•50RV-5V2-F 70 0.15 - 0.5 65A 18 N50BV-5V2-F 2.5 - 50 0.15 - 0.5 50A 18
RV-2S6-15 2.0 0.3 - 0.8 15A 3.5 N65•50BV-5V-F 5 - 70 0.15 - 0.5 65A 18
RV-2S6B-15 2.0 0.8 - 1.5 15A 3.5 N65•50BV-5V2-F 5 - 70 0.15 - 0.5 65A 18
RV-7S6-25 7.5 0.3 - 0.8 25A 6 BV-2S6-15 0.02 - 2.0 0.05 - 0.8 15A 3.5
RV-7S6B-25 7.5 0.8 - 1.5 25A 6 BV-7S6-25 0.2 - 7.5 0.15 - 0.5 25A 6
RV-25S6-25 25 0.3 - 0.8 25A 7.5 BV-25S6-25 2 - 25 0.1 - 0.8 25A 7.5
SUS SUS
RV-25S6B-25 25 0.8 - 1.0 25A 7.5 BV-25S6-40 2 - 25 0.1 - 0.8 40A 7.5
RV-25S6-40 25 0.3 - 0.8 40A 7.5 BV-25S6-50 2 - 25 0.1 - 0.8 50A 10
RV-25S6-50 25 0.3 - 0.8 50A 10 N50BV-5S6-F 2.5 - 80 0.15 - 0.5 50A 29
RV-25S6B-40 25 0.8 - 1.0 40A 7.5 N65BV-5S6-F 5 - 120 0.15 - 0.5 65A 42
N50RV-5S6-F 80 0.15 - 0.5 50A 29 BV-1T -15 0.005 - 1.0 0.05 - 0.8 15A 0.5
N65RV-5S6-F 120 0.15 - 0.5 65A 42 BV-7T -15 0.2 - 7.0 0.05 - 0.8 15A 5
RV-1T -15 1.0 0.3 - 0.8 15A 0.5 PVDF BV-7T -25 0.2 - 7.0 0.05 - 0.8 25A 5
RV-7T -15 7.0 0.3 - 0.8 15A 5 BV-25T -25 2 - 25 0.1 - 0.8 25A 5
PVDF RV-7T -25 7.0 0.3 - 0.8 25A 5 BV-25T -40 2 - 25 0.1 - 0.8 40A 5.5
RV-25T -25 25 0.3 - 0.8 25A 5 : Symbol for material of O-ring ("V" for FKM, "E" for EPDM)
RV-25T -40 25 0.3 - 0.8 40A 5.5 O-ring material or N type is "5V" for CR, or "5V2" for FKM.
: Symbol for material of O-ring ("V" for FKM, "E" for EPDM) Note: Material for diaphragm is PTFE except BV-1P and N type.
O-ring material of N type is "5V2" for FKM. Material of diaphragm is same as O-ring material at BV-1P and N type.
Note: Material for diaphragm is PTFE except RV-1P and N type.
Material of diaphragm is same as O-ring material at RV-1P and N type

6
 Metering pumps

Points to be observed in pump installation and piping

Iwaki metering pump LK series are reciprocating pumps employing the eccentric cam system.
Reciprocating pumps generate pulsation in the suction and discharge piping. Special consideration,
(different from the ordinary centrifugal pumps), should be given to this point when planning the pump installation and piping.

• Prevention of pipe vibration • Prevention of overfeeding • Prevention of suction failure

Discharge side inertial resistance Pid < 0.1MPa Pump differential pressure > Inertial resistance Pi NPSHa > NPSHr
• Pid : Inertial resistance on discharge side • The larger one of the suction side or the discharge side NPSHa = Pa - Pv ± Phs - Pis * MPa
*Or Pfs : whichever is the larger.
Inertial resistance means the pulsated impact Overfeeding means excessive flow of the liquid due
(NPSH : Net positive suction head)
force generated by the flow just upon entering to abnormal functioning of the check valve caused
discharge stroke. It is a phenomenon particular to by pulsation of the liquid in the piping. Check If NPSHa is not sufficient, the pump may be
a reciprocating pump which is generated as a carefully in case the differential pressure is low and damaged by the flow-break or cavitation
result of the sudden application of acceleration to in case the piping is too long even with the generated under such conditions.
the liquid in the discharge piping. differential pressure value at 0.03MPa.
The condition "Pid < 0.1MPa is given above as an • NPSHa : Absolute NPSH (MPa)
approximate standard. If Pid becomes 0.1MPa or Measures • NPSHr : Required NPSH (value particular to the pump) (MPa)
1. Install air chamber.
higher, vibration on the pipe is generated. So • Pa : Absolute pressure onto the tank liquid surface (MPa)
2. Install back pressure valve
measures should be taken to cope with the • PV : Liquid vapour pressure (MPa)
influence of vibration on the pump, too. • Phs : Pressure caused by the height of the suction side (MPa)
(Flooded suction : +, Negative suction : –)
Measures • Pis Inertial resistance on the suction side (MPa)
1. Install pulsation prevention device (air chamber).
• Pfs Piping resistance on the suction side (MPa)
2. Enlarge the diameter and shorten the length
of the discharge piping.

Inverter control of LK series

In case of inverter-applied control of the discharge, the control range may be different according to the types or the pressure employed.

List of the specifications for the selection of LK series inverter control system
Capacity Max. Pressure Control range Stroke speed Inverter Motor Description
Full stroke length MPa spm frequency
Model L/min Hz
Note 1 PVC, PVDF SUS Note 2 Note 3
LK- 11 0.012 - 0.048 1.0 1.5 1:4 29 - 116 30 - 120 1. The frequency less than the lowest in
21 0.030 - 0.12 1.0 1.5 1:4 29 - 116 30 - 120 the table cannot be used as unstable
22 0.080 - 0.12 1.0 1.5 1 : 1.5 78 - 116 40 - 60 rotation of motor is expected.
31 0.15 - 0.60 1.0 1.5 1:4 29 - 116 30 - 120 0.2kW
2. Drive over the max. frequency cannot
32 0.40 - 0.60 1.0 1.5 1 : 1.5 78 - 116 40 - 60 Standard motor
be made.
45 0.50 - 2.0 0.8 0.8 1:4 29 - 116 30 - 120 (IWAKI original
flange motor)
47 1.3 - 2.0 0.8 0.8 1 : 1.5 78 - 116 40 - 60 3. Inverter motor cannot be installed.
55 1.5 - 6.0 0.3 0.3 1:4 24 - 96 25 - 100
57 4.8 - 7.2 0.3 0.3 1 : 1.5 78 - 116 40 - 60
LK-F 11 0.006 - 0.024 1.0 1.5 1:4 15 - 58 15 - 60 1. The frequency less than the lowest
21 0.015 - 0.060 1.0 1.5 1:4 15 - 58 15 - 60 should not cause trouble in operation.
22 0.016 - 0.12 1.0 1.5 1 : 7.5 15 - 116 8 - 60 However, such a level may affect the
stability of the pump's performance.
31 0.075 - 0.30 1.0 1.5 1:4 15 - 58 15 - 60 0.4kW
32 0.10 - 0.60 1.0 1.5 1:6 19 - 116 10 - 60 Inverter motor
2. 1 type can drive at a level
45 0.25 - 1.0 1.0 1.5 1:4 15 - 58 15 - 60 (VF motor)
higher than 60Hz. Contact your dis-
47 0.33 - 2.0 0.8 0.8 1:6 19 - 116 10 - 60 tributor in advance.
55 0.83 - 3.3 0.5 0.5 1:4 15 - 58 15 - 60
57 1.2 - 7.2 0.3 0.3 1:6 19 - 116 10 - 60
LK-A 55 1.1 - 4.4 0.3 0.3 1:4 20 - 78 20 - 80 1. The frequency less than the lowest
1.4 - 4.4 0.5 0.5 1 : 3.2 25 - 78 25 - 80 0.4kW cannot be used as unstable motor ro-
57 3.0 - 7.2 0.3 0.3 1 : 2.4 49 - 116 25 - 60 Inverter motor tation of motor is expected.
3.6 - 7.2 0.5 0.5 1:2 58 - 116 30 - 60 (VF motor)
2. Drive over the max. frequency cannot
65 4.5 - 14.4 0.2 0.2 1 : 3.2 25 - 78 25 - 80 be used.
LK-B 65 3.7 - 14.5 0.3 0.3 1:4 20 - 78 20 - 80 0.75kW
4.6 - 14.5 0.5 0.5 1 : 3.2 25 - 78 25 - 80 Inverter motor
75 6.7 - 21.5 0.3 0.3 1 : 3.2 25 - 78 25 - 80 (VF motor)
LK-C 76 8 - 24 0.5 0.5 1:3 28 - 86 20 - 60 1.5kW
86 13 - 40 0.3 0.3 1:3 28 - 86 20 - 60 Inverter motor
87 18 - 54 0.3 0.3 1:3 39 - 116 20 - 60 (VF motor)
Note 1: The capacity is the value when the maximum discharge pressure is applied in each type (with pure water at room temperature)
Note 2: With the LK-F type, a larger control range than 1 : 10 is available. In this case, however, the discharge accuracy and the linearity may be affected due to a stroke speed as low as 15 spm.
Note 3: The standard inverter is the Toshiba VF motor. In case of another motor used, most of the date in this list can still be used. To be sure, please contact your distributor in advance.
An inverter control with an ordinary general-purpose motor should not be employed, because it may result in trouble in trouble in the low speed range.