MAE

V100R020C10
Optimization MML Command and Parameter
Reference

Issue Draft A

Date 2020/01/15

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All
or part of the products, services and features described in this document may not be within the purchase scope or the
usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this
document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do
not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Huawei Industrial Base
Addres Bantian, Longgang
s: Shenzhen 518129
People's Republic of China
Website
http://www.huawei.com
:
Email: [email protected]
Overview
This document describes MML commands delivered by the MAE to NEs and parameter-related information.

Product Version
Product

MAE

Intended Audience
This document is intended for:
Maintenance engineers
Technical support engineers

Structure
Describes the content of each sheet and the meaning of each field in MML tables.

Description of each sheet

Common Common MML commands and parameter-related information for each feature.

Subscription MML commands and parameter-related information that need to be subscribed

G2G ANR MML commands and parameter-related information for GSM-to-GSM ANR.

MML commands and parameter-related information about missing neighboring

G2U ANR
ANR.

MML commands and parameter-related information about missing neighboring

G2L ANR
ANR.

MML commands and parameter-related information about missing neighboring

U2G ANR
ANR.

U2U Intra-Frequency ANR MML commands and parameter-related information about UMTS-to-UMTS intra

U2U Inter-Frequency ANR MML commands and parameter-related information about UMTS-to-UMTS inte

MML commands and parameter-related information about missing neighboring

U2L ANR
ANR.
UMTS Blind_ANR MML commands and parameter-related information about UMTS Blind Neighbo

LTE Overlapped Detection MML commands and parameter-related information about LTE Overlapped Det

MML commands and parameter-related information about UMTS DL coverage

UMTS CCO - Coverage - P&F
and Feature.

UMTS CCO - Coverage - RETMML commands and parameter-related information about UMTS DL coverage

MML commands and parameter-related information about UMTS DL capacity o

UMTS CCO - Capacity - P&F
and Feature.

MML commands and parameter-related information about LTE DL coverage op

LTE CCO - Coverage - P&F
Feature.

LTE CCO - coverage - RET MML commands and parameter-related information about LTE DL coverage op

MML commands and parameter-related information about LTE DL capacity opt

LTE CCO - Capacity - P&F
Feature.

LTE CCO - Capacity - RET MML commands and parameter-related information about LTE DL capacity opt

GSM Frequency OptimizationMML commands and parameter-related information about GSM Frequency Op

UMTS PSC Self-Optimization MML commands and parameter-related information about UMTS scrambling co

LTE PCI Self-Optimization MML commands and parameter-related information about LTE PCI optimization

LTE CODC MML commands and parameter-related information about LTE CODC.

UMTS Inter-Band MLB MML commands and parameter-related information about UMTS inter-frequenc

UMTS HetNet Idle Mode MML commands and parameter-related information about UMTS Idle Mode He

LTE MLB MML commands and parameter-related information about LTE load balancing o

UMTS MRO MML commands and parameter-related information about UMTS mobile robust
GSM IPO MML commands and parameter-related information about GSM neighboring ce

UMTS IPO MML commands and parameter-related information about UMTS neighboring c

NR IPO MML commands and parameter-related information about NR neighboring cell

GSM ESM MML commands and parameter-related information about GSM intelligent netw

UMTS ESM MML commands and parameter-related information about UMTS intelligent net

LTE ESM MML commands and parameter-related information about LTE intelligent netwo

UMTS IIM MML commands and parameter-related information about intelligent interferenc

MBB Traffic Migration - G2U MML commands and parameter-related information about MBB Traffic Migratio

MBB Traffic Migration - U2L MML commands and parameter-related information about MBB Traffic Migratio

UMTS Planned Event Handling

MML commands and parameter-related information about UMTS Massive Even

LTE Planned Event Handling MML commands and parameter-related information about LTE Massive Event

UMTS Motorway MML commands and parameter-related information about UMTS Motorway.

LTE Motorway MML commands and parameter-related information about LTE Motorway.

UMTS Unplanned Event Handling

MML commands and parameter-related information about UMTS Unplanned E

LTE Unplanned Event Handling

MML commands and parameter-related information about LTE Unplanned Eve

D-MIMO Smart Cluster Organization

MML commands and parameter-related information about D-MIMO Smart Clus

SFN HetNet Smart Cluster Organization

MML commands and parameter-related information about SFN HetNet Smart C
 Fields in the MML command list
MML
Indicates a specified MML command.
Command

Parameter Indicates a parameter related to the specified MML command.

Parameter
Describes a parameter.
Description
Value Range Indicates the value range of the parameter.
NE Indicates the corresponding NE type.

Version Indicates the version of the corresponding NE.

Operation
Describes the operation related to the MML command.
Description
Generated
Indicates the source of the parameter value.
Rules

Change History
Changes between document issues are cumulative. The latest document issue contains all the changes mad

Issue Date Description

This issue is a draft of V100R020C10. Compared with 03 for V300R019C10, th

changes:
Draft A 2020/01/15
MML commands and parameter-related information about NR IPO are added (P
Planning).
mands delivered by the MAE to NEs and parameter-related information.

Version

V100R020C10

and the meaning of each field in MML tables.

on MML commands and parameter-related information for each feature.

ommands and parameter-related information that need to be subscribed to for each feature.

ommands and parameter-related information for GSM-to-GSM ANR.

ommands and parameter-related information about missing neighboring cell optimization for GSM-to-UMTS

ommands and parameter-related information about missing neighboring cell optimization for GSM-to-LTE

ommands and parameter-related information about missing neighboring cell optimization for UMTS-to-GSM

ommands and parameter-related information about UMTS-to-UMTS intra-frequency ANR.

ommands and parameter-related information about UMTS-to-UMTS inter-frequency ANR.

ommands and parameter-related information about missing neighboring cell optimization for UMTS-to-LTE
ommands and parameter-related information about UMTS Blind Neighboring Cell Optimization.

ommands and parameter-related information about LTE Overlapped Detection.

ommands and parameter-related information about UMTS DL coverage optimization based on Parameter
ature.

ommands and parameter-related information about UMTS DL coverage optimization based on RET.

ommands and parameter-related information about UMTS DL capacity optimization based on Parameter
ature.

ommands and parameter-related information about LTE DL coverage optimization based on Parameter and
.

ommands and parameter-related information about LTE DL coverage optimization based on RET.

ommands and parameter-related information about LTE DL capacity optimization based on Parameter and
.

ommands and parameter-related information about LTE DL capacity optimization based on RET.

ommands and parameter-related information about GSM Frequency Optimization.

ommands and parameter-related information about UMTS scrambling code (SC) optimization.

ommands and parameter-related information about LTE PCI optimization.

ommands and parameter-related information about LTE CODC.

ommands and parameter-related information about UMTS inter-frequency load balancing optimization.

ommands and parameter-related information about UMTS Idle Mode HetNet load balancing optimization.

ommands and parameter-related information about LTE load balancing optimization.

ommands and parameter-related information about UMTS mobile robustness optimization (MRO).
ommands and parameter-related information about GSM neighboring cell self-planning.

ommands and parameter-related information about UMTS neighboring cell self-planning.

ommands and parameter-related information about NR neighboring cell self-planning.

ommands and parameter-related information about GSM intelligent network energy saving (ES).

ommands and parameter-related information about UMTS intelligent network energy saving (ES).

ommands and parameter-related information about LTE intelligent network energy saving (ES).

ommands and parameter-related information about intelligent interference management (IIM).

ommands and parameter-related information about MBB Traffic Migration - G2U.

ommands and parameter-related information about MBB Traffic Migration - U2L.

ommands and parameter-related information about UMTS Massive Event Handling.

ommands and parameter-related information about LTE Massive Event Handling.

ommands and parameter-related information about UMTS Motorway.

ommands and parameter-related information about LTE Motorway.

ommands and parameter-related information about UMTS Unplanned Event Handling.

ommands and parameter-related information about LTE Unplanned Event Handling.

ommands and parameter-related information about D-MIMO Smart Cluster Organization.

ommands and parameter-related information about SFN HetNet Smart Cluster Organization.
d MML command.

er related to the specified MML command.

ter.

ange of the parameter.

ponding NE type.

n of the corresponding NE.

tion related to the MML command.

of the parameter value.

are cumulative. The latest document issue contains all the changes made in earlier issues.

ption

ue is a draft of V100R020C10. Compared with 03 for V300R019C10, this issue incorporates the following
s:
ommands and parameter-related information about NR IPO are added (PCI Planning and PRACH RSI
g).
 MML Command Parameter Parameter Description NE

Indicates the function

DSP LICINFO FUNCTIONTYPE eNodeB
type.

DSP UNODEB – – RNC

 SONMaster Value
Version Operation Description Parameter Value Type
Range and Unit

Fixed-value parameters: includes the

parameters for which the SONMaster
provides built-in default values that
Use this command to
eRAN7.0 and Value Range: eNodeB cannot be modified by users. The
query the license sale
later Unit: None SONMaster delivers the fixed values
information.
of these parameters based on the
objects that are filtered according to
algorithm requirements.
Use this command to
RAN16.0 and
display the status of a – –
later
NodeB.
 7.95 kbit/s is deleted
this switch turned on,
fromcells
the rateunder set B.the RNC
14.
support soft handovers.
PERFENH_DC_USERN
Upon receiving event
686970386.xls
UM_LDB_OPT_SWITC
1A, 1B, 1C, or 1D after
文档密级
H: Whether
delivering annon-flexible
intra-
DC cells are
frequency ranked
measurement
based on
control the userto the
message
MML Command Parameter number
ParameteraDescription
UE, the of
RNC single
initiates cell NE Version
during the load
associated addition,
balancing.and
removal, When this
switch is turned
replacement off, non-
of target
SET flexible
cell
Typeofofthe DC
ansoft cells are
handover.
application
APPTYPE ranked
17. based on the RNC RAN16.0 and later
UMMEVENTCHRCTRL that uses CHRs
user number of the
HO_MC_MEAS_BEYO
carrier group
ND_UE_CAP_SWITCH:
Switching for during
controlling the
SET load
When balancing.
the switch When
is on,
EVENTSWITCH whether CHRs are RNC RAN16.0 and later
UMMEVENTCHRCTRL this switch
the neighboring
reported in is turned
event cell on,
blocks.
non-flexible
whose
The second frequency DC cells
switching band are
SET ranked
is
forbeyond based
controlling the UE'son the
whether
EVENTSWITCH2 user RNC RAN16.0 and later
UMMEVENTCHRCTRL CHRsnumber
capabilities
are reportedcanof aalso single
inbe
cell during
delivered
event blocks. in the
the load
inter-
balancing. measurement
frequency
Type
15. of an application
list.
SET UMMCHRSCOPE APPTYPE RNC RAN16.0 and later
that uses CHRs
PERFENH_DCH_TRCH
18.
_OPT_SWITCH:
HO_MC_NCELL_COMB
Whether
Method ofthe
INE_SWITCH: RNC
setting When a the
SET UMMCHRSCOPE SCOPETYPE changes
switch is the
on, contents
the of RNC RAN16.0 and later
CHR.
the information
neighboring cellelements
(IEs)
combined "UL- algorithm is
Whether the CHR
AddReconfTransChInfor
used during the delivery
SET UMMCHRSCOPE CHRSCOPECTRL function is supported in RNC RAN16.0 and later
mation"
of the objectsand "rb- to be
a specified scope.
MappingInfo"
measured. Whenin the theRRC
RB SETUP
switch is notand on, RRC the
Type of an application
SET UMMMRCTRL APPTYPE RB RECFG
optimal messages.
cell algorithm is RNC RAN16.0 and later
that uses MRs
When the content of the
used.
Type
sub-IEof"tfs- the service
19.
processed
SignallingMode" by a UE in the
HO_MC_SIGNAL_IUR_I
SET UMMMRCTRL MRTRAFFICTYPE whose
IE "DL- measurement RNC RAN16.0 and later
NTRA_SWITCH: When
reports are to be traced
AddReconfTransChInfor
the switch is on, intra-
by the RNC.
Whether
mation" istothe collect
same as
frequency handover is
different
that
allowedof the types
over sub-IE
the of Iur
SET UMMMRCTRL MRRPRTCFGSWITCH RNC RAN16.0 and later
measurement if the reports
"transportFormatSet"
interface UE hasin or
measurement
the
only IE "UL-
signaling. control.
Whether to collect
MRLCSMETHODSWITC AddReconfTransChInfor
20.
measurement reports
SET UMMMRCTRL mation", RNC RAN16.0 and later
H obtained the
HO_MC_SIGNAL_SWIT using sub-IE "tfs-
different
SignallingMode"
CH: When
location methods. the can
switch be
is
defined
on, quality as measurement
Type theofactive
"SameAsULTrCH",
on an application
set is
SET UMMMRSCOPE APPTYPE RNC RAN16.0 and later
that
which uses
reduces
delivered after MRs signaling
the sizes
of the but
setup RRC RB SETUP
before service
The RRC
and
setup. parameter
If the RBUE specifies
RECFGis at the
SET UMMMRSCOPE SCOPETYPE the measurement
messages.
cell verge orWhen receives report
this RNC RAN16.0 and later
collecting
switchsignals
weak areas.
is turned after off, the
RNC
accessingdefines thethe IE
network,
Whether
the RNC to
"LogicalChannelList"
can support
trigger the
as
SET UMMMRSCOPE MRSCOPECTRL RNC RAN16.0 and later
RNC-level MRand
"Configured"
inter-frequency function.
orthe IE
inter-
"rlc-Size-List"
RAT handoveras when the
"allSizes". When this
PERFENHANCESWITC UE sets up the RRC.
SET UCORRMPARA switch
21. is turned on, the RNC RAN16.0 and later
H3
RNC defines the IE
HO_MC_SNA_RESTRI
"LogicalChannelList"
CTION_SWITCH: When as
SET "allSizes"
the switchand is on, thethe sub-IE
UCORRMALGOSWITC HOSWITCH "rlc-Size-List" RNC RAN16.0 and later
RNC controls in thethe UEs IE in
H "rb-MappingInfo" as
the connected state
Indicates on reserved
"Configured".
based the The uplink 32-bit
switch parameter
TFS is the same
configurations onas 2
thethat
the
MOD ENBRSVDPARA RSVDSWPARA2 eNodeB eRAN8.0 and later
is reserved
downlink
CN. The UEs for
TFS.can onlyfuture
requirements.
16.
access and move in
PERFENH_RB_MAPPI
authorized cells.
NG_OPT_SWITCH:
22.
08/24/2023 华为保密信息,未经授权禁止扩散
Whether the RRC RB
HO_LTE_PS_OUT_SWI 第13页，共633页
SETUP
TCH: message
Whether to enable
contains the
handover from information
UMTS to
element
LTE. When (IE)this "RBswitch is
 686970386.xls 文档密级

Indicates whether to
MOD PCICONFLICTDETECT display PCI conflict
eNodeB eRAN8.0 and later
ENODEBALGOSWITCH SWITCH alarms in the alarm
console.
LST ID of the missing inter-
UAUTOINTERNCELLG InterNcellDetectGrpIdx frequency neighboring RNC RAN16.0 and later
ROUP cell detection group
ADD ID of the missing inter-
UAUTOINTERNCELLG InterNcellDetectGrpIdx frequency neighboring RNC RAN16.0 and later
ROUP cell detection group
This parameter specifies
ADD
the number of inter-
UAUTOINTERNCELLG MeasObjNum RNC RAN16.0 and later
frequency neighboring
ROUP
cell detection objects.
ADD Indicating the selected
UAUTOINTERNCELLG BandInd1 frequency band in the RNC RAN16.0 and later
ROUP cell setup process.
Downlink frequency
ADD
number of the inter-
UAUTOINTERNCELLG DLMeasFreq1 RNC RAN16.0 and later
frequency neighboring
ROUP
cells to be detected.
Start scrambling code
ADD
for the frequency of the
UAUTOINTERNCELLG StartSC1 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
End scrambling code for
ADD
the frequency of the
UAUTOINTERNCELLG EndSC1 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
ADD Indicating the selected
UAUTOINTERNCELLG BandInd2 frequency band in the RNC RAN16.0 and later
ROUP cell setup process.
Downlink frequency
ADD
number of the inter-
UAUTOINTERNCELLG DLMeasFreq2 RNC RAN16.0 and later
frequency neighboring
ROUP
cells to be detected.
Start scrambling code
ADD
for the frequency of the
UAUTOINTERNCELLG StartSC2 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
End scrambling code for
ADD
the frequency of the
UAUTOINTERNCELLG EndSC2 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
ADD Indicating the selected
UAUTOINTERNCELLG EndSC2 frequency band in the RNC RAN16.0 and later
ROUP cell setup process.
Downlink frequency
ADD
number of the inter-
UAUTOINTERNCELLG DLMeasFreq3 RNC RAN16.0 and later
frequency neighboring
ROUP
cells to be detected.
Start scrambling code
ADD
for the frequency of the
UAUTOINTERNCELLG StartSC3 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
End scrambling code for
ADD
the frequency of the
UAUTOINTERNCELLG EndSC3 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
ADD Indicating the selected
UAUTOINTERNCELLG BandInd4 frequency band in the RNC RAN16.0 and later
ROUP cell setup process.

08/24/2023 华为保密信息,未经授权禁止扩散 第14页，共633页

 686970386.xls 文档密级

Downlink frequency
ADD
number of the inter-
UAUTOINTERNCELLG DLMeasFreq4 RNC RAN16.0 and later
frequency neighboring
ROUP
cells to be detected.
Start scrambling code
ADD
for the frequency of the
UAUTOINTERNCELLG StartSC4 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
End scrambling code for
ADD
the frequency of the
UAUTOINTERNCELLG EndSC4 RNC RAN16.0 and later
inter-frequency
ROUP
neighboring cell.
RMV ID of the missing inter-
INTERNCELLDETECTG
UAUTOINTERNCELLG frequency neighboring RNC RAN16.0 and later
RPIDX
ROUP cell detection group
LST Cell ID, which uniquely
UCELLAUTONCELLDE CellId identifies a cell. RNC RAN16.0 and later
TECT
ADD Cell ID, which uniquely
UCELLAUTONCELLDE CellId identifies a cell. RNC RAN16.0 and later
TECT
Whether to enable
ADD missing inter-frequency
UCELLAUTONCELLDE AutoInterNCellSwitch neighboring cell RNC RAN16.0 and later
TECT detection.
ADD ID of the missing inter-
UCELLAUTONCELLDE InterNcellDetectGrpIdx frequency neighboring RNC RAN16.0 and later
TECT cell detection group.
MOD Cell ID, which uniquely
UCELLAUTONCELLDE CELLID identifies a cell. RNC RAN16.0 and later
TECT
Whether to enable
MOD missing inter-frequency
AUTOINTERNCELLSWI
UCELLAUTONCELLDE neighboring cell RNC RAN16.0 and later
TCH
TECT detection.
MOD ID of the missing inter-
INTERNCELLDETECTG
UCELLAUTONCELLDE frequency neighboring RNC RAN16.0 and later
RPIDX
TECT cell detection group.
LST ID of the missing
UAUTOGSMNCELLGR GsmNcellDetectGrpIdx neighboring GSM cell RNC RAN16.0 and later
OUP detection group.
ADD ID of the missing
UAUTOGSMNCELLGR GsmNcellDetectGrpIdx neighboring
detection GSM cell
objects. Each RNC RAN16.0 and later
OUP detection
object group.
is determined by
a start BCC, end BBC,
ADD This
start parameter together
NCC, end NCC,
UAUTOGSMNCELLGR MeasGSMObjNum with the end NCC RNC RAN16.0 and later
start BCCH frequency
OUP determines
number, endanBCCH NCC
range.
frequencyThis parameter
number, and
ADD This parameter
together
frequency with thetogether
band. BCC
UAUTOGSMNCELLGR StartNCC1 with the start NCC RNC RAN16.0 and later
range and frequency
OUP determines an NCC
range determines a
range. This
supplementary parameter
ADD This parameter together
together
neighboringwithGSM
the BCC
UAUTOGSMNCELLGR ENDNCC1 with
range the end
and BCC cell
frequency
RNC RAN16.0 and later
OUP list.
determines a BCCa
range determines
range. This
supplementary parameter
ADD
together with
neighboring GSM the NCC
cell
UAUTOGSMNCELLGR StartBCC1 RNC RAN16.0 and later
range
list. and frequency
OUP
range determines a
supplementary
neighboring GSM cell
list.
08/24/2023 华为保密信息,未经授权禁止扩散 第15页，共633页
 This parameter together
686970386.xls 文档密级
with the start BCC
determines a BCC
range. This parameter
ADD
together with the NCC
UAUTOGSMNCELLGR EndBCC1 RNC RAN16.0 and later
range and frequency
OUP
range determines a
ADD supplementary
This specifies
parameter together
UAUTOGSMNCELLGR GsmBandInd1 neighboring
the
with the end GSM
frequency band cell
frequencyof RNC RAN16.0 and later
OUP list. GSMdetermines
the
number cell. a
frequency range. This
ADD This parameter together
parameter together with
UAUTOGSMNCELLGR StartFreq1 with the start frequency RNC RAN16.0 and later
the NCC range and BCC
OUP number determines
range determines aa
frequency
supplementaryrange. This
ADD This parameter together
parameter
neighboring together
GSM with
cell
UAUTOGSMNCELLGR EndFreq1 with the end NCC RNC RAN16.0 and later
the
list. NCC range and BCC
OUP determines an NCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM BCC
cell
UAUTOGSMNCELLGR StartNCC2 with the start NCC RNC RAN16.0 and later
range
list. and frequency
OUP determines an NCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM BCC
cell
UAUTOGSMNCELLGR ENDNCC2 with the end BCC RNC RAN16.0 and later
range
list. and frequency
OUP determines a BCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM NCC
cell
UAUTOGSMNCELLGR StartNCC2 with the start BCC RNC RAN16.0 and later
range
list. and frequency
OUP determines a BCC
range determines a
range. This parameter
supplementary
ADD
together
neighboring withGSM
the NCC
cell
UAUTOGSMNCELLGR EndBCC2 RNC RAN16.0 and later
range
list. and frequency
OUP
range determines a
ADD supplementary
This specifies
parameter together
UAUTOGSMNCELLGR GsmBandInd2 neighboring
the
with the end GSM
frequency band cell
frequencyof RNC RAN16.0 and later
OUP list. GSMdetermines
the
number cell. a
frequency range. This
ADD This parameter together
parameter together with
UAUTOGSMNCELLGR StartFreq2 with the start frequency RNC RAN16.0 and later
the NCC range and BCC
OUP number determines
range determines aa
frequency
supplementaryrange. This
ADD This parameter together
parameter
neighboring together
GSM with
cell
UAUTOGSMNCELLGR EndFreq2 with the end NCC RNC RAN16.0 and later
the
list. NCC range and BCC
OUP determines an NCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM BCC
cell
UAUTOGSMNCELLGR StartNCC3 with the start NCC RNC RAN16.0 and later
range
list. and frequency
OUP determines an NCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM BCC
cell
UAUTOGSMNCELLGR ENDNCC3 with the end BCC RNC RAN16.0 and later
range
list. and frequency
OUP determines a BCC
range determines a
range. This parameter
supplementary
ADD This parameter
together
neighboring thetogether
withGSM NCC
cell
UAUTOGSMNCELLGR StartBCC3 with the start BCC RNC RAN16.0 and later
range
list. and frequency
OUP determines a BCC
range determines a
range. This parameter
supplementary
ADD
together
neighboring withGSM
the NCC
cell
UAUTOGSMNCELLGR EndBCC3 RNC RAN16.0 and later
range
list. and frequency
OUP
range determines a
ADD supplementary
This specifies
parameter together
UAUTOGSMNCELLGR GsmBandInd3 neighboring
the
with the end GSM
frequency band cell
frequencyof RNC RAN16.0 and later
OUP list.
the GSMdetermines
number cell. a
frequency range. This
ADD
parameter together with
UAUTOGSMNCELLGR StartFreq3 RNC RAN16.0 and later
the NCC range and BCC
OUP
range determines a
supplementary
neighboring GSM cell
list.
08/24/2023 华为保密信息,未经授权禁止扩散 第16页，共633页
 This parameter together
686970386.xls 文档密级
with the start frequency
number determines a
frequency range. This
ADD This parameter together
parameter together with
UAUTOGSMNCELLGR EndFreq3 with the end NCC RNC RAN16.0 and later
the NCC range and BCC
OUP determines an NCC
range determines a
range. This
supplementary parameter
ADD This parameter together
together
neighboring withGSM
the BCC
UAUTOGSMNCELLGR StartNCC4 with
range the start
and NCCcell
frequency
RNC RAN16.0 and later
OUP list.
determines an NCC
range determines a
range. This
supplementary parameter
ADD This parameter together
together
neighboring withGSM
the BCC
UAUTOGSMNCELLGR ENDNCC4 with
range the end
and BCC cell
frequency
RNC RAN16.0 and later
OUP list.
determines a BCCa
range determines
range. This
supplementary parameter
ADD This parameter
together
neighboring with thetogether
GSM NCC
cell
UAUTOGSMNCELLGR StartBCC4 with the start BCC RNC RAN16.0 and later
range
list. and frequency
OUP determines a BCC
range determines a
range. This parameter
supplementary
ADD
together
neighboring withGSM
the NCC
cell
UAUTOGSMNCELLGR EndBCC4 RNC RAN16.0 and later
range
list. and frequency
OUP
range determines a
ADD supplementary
This specifies
parameter together
UAUTOGSMNCELLGR GsmBandInd4 neighboring
the
with the end GSM
frequency band cell
frequencyof RNC RAN16.0 and later
OUP list. GSMdetermines
the
number cell. a
frequency range. This
ADD This parameter together
parameter together with
UAUTOGSMNCELLGR StartFreq4 with the start frequency RNC RAN16.0 and later
the NCC range and BCC
OUP number determines
range determines aa
frequency
supplementary range. This
ADD
parameter
neighboringtogether
GSM cell with
UAUTOGSMNCELLGR EndFreq4 RNC RAN16.0 and later
the
list. NCC range and BCC
OUP
range determines a
RMV supplementary
ID of the missing
GSMNCELLDETECTGR
UAUTOGSMNCELLGR neighboring GSM cell RNC RAN16.0 and later
PIDX list.
OUP detection group.
ADD
Cell ID, which uniquely
UCELLAUTONCELLDE CellId RNC RAN16.0 and later
identifies a cell.
TECT
ADD Whether to enable
UCELLAUTONCELLDE AutoGsmNCellSwitch missing neighboring RNC RAN16.0 and later
TECT GSM cell detection.
ADD ID of the missing
UCELLAUTONCELLDE GsmNcellDetectGrpIdx neighboring GSM cell RNC RAN16.0 and later
TECT detection group.
MOD
Cell ID, which uniquely
UCELLAUTONCELLDE CellId RNC RAN16.0 and later
identifies a cell.
TECT
MOD Whether to enable
UCELLAUTONCELLDE AutoGsmNCellSwitch missing neighboring RNC RAN16.0 and later
TECT GSM cell detection.
MOD ID of the missing
UCELLAUTONCELLDE GsmNcellDetectGrpIdx neighboring GSM cell RNC RAN16.0 and later
TECT detection group.
This parameter indicates
LST GBSS16.0 and
LstFormat the format of the result GBSC
GCELLCCUTRANSYS later
list.

SET GBSS16.0 and

IDTYPE Index type GBSC
GCELLCCUTRANSYS later

08/24/2023 华为保密信息,未经授权禁止扩散 第17页，共633页

 686970386.xls 文档密级

Threshold
Index of a cell,of theuniquely
level
SET Neighboring
difference cell
between GBSS16.0 and
CELLID identifying
interference cell in aa
a level GBSC
GCELLCCUTRANSYS neighboring cell and the later
BSC.
threshold 1 (measured
serving cell (measured
QSEARCHC based
In on
on the
connection
based the MR) mode,
MR) for
forif
SET 2G/3G
the signal neighboring
level is below cell GBSS16.0 and
2G/3G neighboring cell GBSC
GCELLCCUTRANSYS automatic
[0-7] or above optimization.
[8-15], the later
automatic optimization.
When
MS
When startsthe
theofto signal
search for
signal
FDDFREQCNUM Number
strength
3G cells. UTRAN
difference
For example, FDDif
SET strength
cells that difference
should be GBSS16.0 and
Absolute
between level
a threshold GBSC
GCELLCCUTRANSYS this parameter
between
included a serving
in serving is set cell
to 5
cell later
(measured
and
and a neighboring
if the
a basedlevel
signal
neighboring on
cell
cell the
ofin
in
measurement
MR)
the MR for
serving 2G/3G
is less report
than
cell is than this
lower
the MR is greater
neighboring
threshold,
than 5, thethe MScell
counter
starts to GBSS16.0 and
SET OTHSOFTPARA RSSThres this parameter minus 64, GBSC
automatic
Number
search of
for optimization.
3GMRs in if
cells; later
the counter
When
Which
this the
the signal
parameter
Neighboring
Measurement Signal
cellis set to
Reports
strength
Strength
10 and
interference
with if of
Signal the aStrength
Difference
signal level
level GBSS16.0 and
SET OTHSOFTPARA ASSThres neighboring
Between
of the serving
threshold
Difference the cell
Serving
2Between cell
(measuredinisthe GBSC
later
MR
Cell
above
based is
and
Neighbor greater
10,
on the then
the
Cellcell than
Neighbor
MR) the
and for this
MS
Neighboring
threshold,
Cell
starts
2G/3G Is toSmaller the
search
neighboring counter
Than
for 3Gthe
Serving
interference Greatercell
Cell level
Measurement
NeighborCell
Neighbor
cells.
automatic
Than Relative Cell Reports
Interfere
optimization.
Level GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres0 threshold GBSC
with
Level
When
Threshold the 3signal
Signal
Thresh
Interference (measured
isStrength
0
Level
measured. of later
based
Neighbor
Threshold
strength on the
Cell
1 is
differenceMR)
Greater for
Neighboring
The
2G/3G actual cell of this
value
neighboring cell
Than
measured.
between Absolute
interference
parameter a isserving
levelLevel
equal cell
to its
automatic
Threshold optimization.
is(measured
measured. GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres1 and avalue
threshold
GUI neighboring
4signal
minus cell in
64. GBSC
When later
When
the
basedMRthe the
on signal
is the
greaterMR) than
for
strength
Neighboring
strength
or difference
cell
difference
equalneighboring
to this
2G/3G
between a serving cell
cell
interference
between a
threshold, optimization.
automatic level
serving
the counter cell GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres2 and a
a neighboring GBSC
threshold
and
Number
When of5signal
neighboring
the (measured
MRs in cell
cell in in later
the
based
the
WhichMR
MR on is
is
the greater
the
greater
SignalMR) than
for
than
strength
Neighboring
or equal difference
to cell
this
2G/3G
or equalneighboring
Strength
between to this
Difference
a serving cell
cell
interference
threshold,
automatic the level
counter
optimization. GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres3 threshold,
Between
and the
a neighboring
threshold the
6signal counter
Serving
(measured cell in GBSC
Number
When
S364:Number
CellMR and the of
the MRs ofinMRs
Neighbor in later
the
based
Which on is
the greater
the
SignalMR) than
for
strength
Neighboring
Which
Cell
or Is the difference
Greater
equalneighboring
to cell
Signal
this Than the
2G/3G
Strength
between Difference
aCell
serving cell
cell
interference
Strength
Neighbor
threshold,
automatic the level
Differencecounter
optimization. GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres4 Between
and the
a neighboring Serving GBSC
threshold
Between
Interference
Number
When
Cell and the of 7signal
the
the
(measured
MRsServing
Level
Neighborin cell in later
the
based
Cell MRand
Threshold
Which on is
the thegreater
the
2 is MR)
Neighbor
Signal than
for
strength
Cell
or Is
equal difference
Greater
to this Than the
2G/3G
Cell Is
measured.
Strength
between neighboring
Greater
a Than
The actual
Difference
serving cell
the
cell
Neighbor
threshold,
automatic
Neighbor
value of Cell
this the counter
optimization.
Cell parameter GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres5 Between
and the Level
a neighboring
Interference Serving cell in GBSC
Number
When
is equal
Cell and the
Interference of
to
the MRs
signal
itsLevel
GUI
Neighborin value later
the MR
Threshold
Which is
the greater
3 is
Signal than
strength
Threshold
minus
Cell
or Is 64.
equal difference
Greater
to 1this
is Than the
measured.
Strength
between
measured. a The
Difference
serving actualcell
Neighbor
threshold,
value of Cell
this theparameter
counter GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres6 Between
and a the
neighboring Serving GBSC
Interference
Number
is equal
Cell and of
to
the itsLevel
MRs GUI
Neighborin valuein
cell later
the
The MR actual
Threshold
Which is greater
4 is of
the Signalvalue thanthis
minus
Cell Is 64.
Greater
or equal
parameter
measured.
Strength to The actualthe
this
is Than
equal
Difference to its
Neighbor
threshold,
GUI
value value
of Cell
this the
minus counter
parameter 64. GBSS16.0 and
SET OTHSOFTPARA NcellInterFLevelThres7 Between
Interference the Level
Serving GBSC
Number
is equal
Cell and of
to
the MRs
its GUI
Neighborin value later
Threshold
Which
minus the 5 is
Signal
Cell Is 64.
measured. Greater TheThan actualthe
Strength
Neighbor Difference
Cell
List
value ofof
Between the
of this
theuser-defined
parameter
Serving GBSS16.0 and
STR NCS IDTYPE Type
Interference an index. GBSC
neighbor
is equal
Cell and to
the itsLevel
cells to be
GUI
Neighbor value later
Threshold
measured.
minus 64. 6 is
This
Cell
List Is Greater
of ARFCNs
measured. Than
of thethe
The actual
parameter
Neighbor is
Cell
frequencies
of this to GBSS16.0 and
STR NCS CELLIDLST value
represented
Interference asbe
parameter
Level a GBSC
measured.
is equal to This
its GUI value later
character
Threshold string
7isis where
parameter
minus
the IDs 64.of the cells to be
measured. The
represented actual
asseparated
a
measured
value of this are parameter GBSS16.0 and
STR NCS FREQS character
by &, such string
as GUI where
1&2&5. GBSC
is later
the ARFCNs of thevalue
equal to its
minus 64. to be
frequencies
measured are period
Measurement separated for GBSS16.0 and
STR NCS PERIOD by &, frequency
such as group. GBSC
each later
1&124&956.

08/24/2023 华为保密信息,未经授权禁止扩散 第18页，共633页

 686970386.xls 文档密级
Whether to delete the
BCCH frequencies
contained
List in the BA2 list
of the user-defined GBSS16.0 and
STR NCS FILTERFREQSSW GBSC
from
neighborthe list of to be
cells later
frequenciesThis
measured. to be
measured. is
parameter
GBSS16.0 and
STP NCS CELLIDLST represented as a GBSC
later
character string where
the IDs of the cells to be
This
measuredparameter indicates
are separated GBSS16.0 and
LST GCELLHOCTRL LstFormat the format of the
by &, such as 1&2&5. result GBSC
later
list.
This parameter indicates
GBSS16.0 and
DSP NCS LstFormat the format of the result GBSC
later
list.
This parameter indicates
GBSS16.0 and
DLD N3GCSPARA IP the IP address of the GBSC
later
server.
This parameter indicates
GBSS16.0 and
DLD N3GCSPARA USR the download user name GBSC
later
of the server.
This parameter indicates
the password of the GBSS16.0 and
DLD N3GCSPARA PWD GBSC
download user of the later
server.
This parameter indicates
GBSS16.0 and
DLD N3GCSPARA SRCF the name of the file to GBSC
later
be downloaded.

This parameter indicates GBSS16.0 and

STR N3GCS TASKNAME GBSC
the name of the task. later

This parameter indicates GBSS16.0 and

STP N3GCS TASKNAME GBSC
the name of the task. later

MOD This parameter indicates

VQMALGOSWITCH eNodeB eRAN8.0 and later
ENODEBALGOSWITCH the name of the task.

08/24/2023 华为保密信息,未经授权禁止扩散 第19页，共633页

 Default Value:
CONN_SETUP,
RRC_RELEASE,686970386.xls 文档密级
RRC_RELEASE_RF,
RRC_RELEASE_MSG,
CS_RAB_SETUP,
PS_RAB_SETUP,
MAE Value Range and Fixed-value parameters:
Operation Description CS_RAB_REL, Parameter Value Type
Unit includes the parameters for G2U ANR
PS_RAB_REL, SHO, HHO, which the MAE provides built-in
Use this command to set SYS_HO_OUT, RELOC, default values that cannot be
the RNC-oriented switch for DCCC,
Default FHHO,
Value: EMS Fixed-value parameters:
modified by users. The MAE
reporting call history INTRA_FREQ_NET_OPT, includes the parameters –
Unit: None delivers the fixed values for
of
records (CHRs) in event INTER_FREQ_NET_OPT, which the MAE provides built-in
Use this command to set these parameters based on the
blocks. INTER_RAT_NET_OPT, default
the RNC-oriented switch for Default Value: objects values
that are
Fixed-value
that cannot be
filtered
parameters:
STAT, modified by
accordingthe users.
algorithm MAE
The
to parameters
reporting call history COMPRESS_MODE_INFO –
PS_SERVICE_TRAFFIC_ includesdelivers the
requirements. fixed values for
of
records (CHRs) in event ,STAT,
VQI, KQI_WEB_STAT, which the MAE provides built-in
Use this command to set these parameters based on the
blocks. KQI_VIDEO_INI_STAT,
the RNC-oriented switch for PS_TOTAL_TRAFFIC_ST defaultobjects values
that are
Fixed-value
that cannot be
filtered
parameters:
KQI_VIDEO_PLAY_STAT,
AT, modified
according by users.
algorithm MAE
The
to parameters
reporting call history includes the –
CS_SERVICE_SETUP_PR delivers
HTTP_P2P_TRAFFIC_ST requirements. the fixed values for
of
records (CHRs) in event which the MAE provides built-in
OCESS_DT_MESSAGE,
AT, VIDEO_STAT, these parameters based on the
blocks. default
Use this command to set PS_SERVICE_SETUP_PR
SRB2_STAT, objects values
that are
Fixed-value
that cannot be
filtered
parameters:
Default Value:
OCESS_DT_MESSAGE EMS modified
according by users.
algorithm MAE
The
to parameters
the applicable scope of the includes the –
Default
Unit:
Value:
CS_RAB_QUALITY_STAT,
Unit: None
None delivers the
requirements. fixed values for
of
cell-oriented CHR switch. PERFENH_COMM_PLMN
PS_RAB_QUALITY_STAT, which the MAE provides built-in
these parameters based on the
Use this command to set SPEECH_METAL_NOISE, default
_HO_ALLOWED_SWITCH objects values
that are
Fixed-value
that cannot be
filtered
parameters:
the applicable scope of the ,Default Value: ByRnc
UL_SPEECH_SILENCE, modified
according by users.
algorithm MAE
The
to parameters –
Unit: None includes
delivers the
the fixed values for
of
cell-oriented CHR switch. PERFENH_INITIAL_NCEL
Default Value:
DL_SPEECH_SILENCE1, requirements.
which the MAE provides built-in
DL_SPEECH_SILENCE2, these
LDETECT_SWITCH,
MR_PRD_INTRA_FREQ_ parameters based on the
default
Use this command to set Default Value: FACH,
MEAS_SWITCH_1,
CELL_LOAD, OFF, ON,
PERFENH_VP_TO_AMR_ PTT objects values
that are
Fixed-value
that cannot be
filtered
parameters:
Default Value: modified
according by users.
algorithm MAE
The
to parameters
the applicable
Use scope
this command toof
setthe DEPEND_CELL_SWITCH
SWITCH, includes the –
MR_EVT_INTRA_FREQ_
Unit: None
HO_ALGO_HCS_SPEED_ delivers the
requirements. fixed values for
of
cell-oriented
RNC parameters CHRrelated
switch.to Unit: None
PERFENH_AMRC_TFI_C
MEAS_SWITCH_2, which the MAE provides built-in
EST_SWITCH, these parameters based on the
the collecting of MP_SWITCH, default
MR_PRD_INTER_FREQ_
HO_ALGO_LDR_ALLOW_ objects values
that are
Fixed-value
that cannot be
filtered
parameters:
measurement reports used PERFENH_MR_AGPS_C
Default Value: EMS modified by users.
Use this command to set MEAS_SWITCH_3,
SHO_SWITCH, according
includes the algorithm MAE
The
to parameters –
in network performance MP_SWITCH,
Unit: None
MR_EVT_INTER_FREQ_ delivers the
requirements. fixed values for
of
RNC parameters related to HO_ALGO_MBMS_FLC_S
Default Value: which the MAE provides
PERFENH_AMRC_NACK_ these parameters based on the built-in
analysis, network planning, MEAS_SWITCH_4,
the collecting of WITCH,
TRAFFIC_AMR, default
network optimization, and SWITCH,
MR_PRD_INTER_RAT_M objects values
that are
Fixed-value
that cannot be
filtered
parameters:
measurement reports used HO_ALGO_OVERLAY_S
TRAFFIC_VP, modified by users.
call
Use history analysis.
this command to set PERFENH_MCDRD_OPT_
EAS_SWITCH_5, according
includes algorithm MAE
The
to parameters
the –
in network performance WITCH,
TRAFFIC_BE,
SWITCH, delivers the
requirements. fixed values for
of
RNC parameters related
analysis, network planning, to MR_EVT_INTER_RAT_ME
HO_INTER_FREQ_HARD
TRAFFIC_OTHER which the MAE provides
these parameters based on the built-in
the collecting of PERFENH_MCDRD_MEA
AS_SWITCH_6, default
network optimization, and _HO_SWITCH,
Unit: None
S_OPT_SWITCH, objects values
that are
Fixed-value
that cannot be
filtered
parameters:
measurement
call history reports used
analysis. MR_DL_BLER_MEAS_SW
HO_LTE_SERVICE_PSHO modified
according by users.
algorithm MAE
The
to parameters
Use this command to set includes the –
in network performance PERFENH_UE_LOC_DRD
ITCH_7,
_OUT_SWITCH, delivers the
requirements. fixed values for
of
RNC parameters related
analysis, network planning, to _OPT_SWITCH,
MR_UE_TX_POWER_ME which the MAE provides
these parameters based on the built-in
the collecting of HO_INTER_RAT_CS_OUT
Default Value: default
network optimization, and PERFENH_PS_FAST_RE
AS_SWITCH_8,
_SWITCH, objects values
that are
Fixed-value
that cannot be
filtered
parameters:
measurement reports used
call history analysis. LCS_CELLID_RTT_SWIT
TURN_LTE_SWITCH,
MR_UL_SIR_MEAS_SWIT modified
according by users.
algorithm MAE
The
to parameters
includes the –
in network performance HO_INTER_RAT_PS_3G2
CH_3
PERFENH_FORCE_AMR_
CH_9, delivers the
requirements. fixed values for
of
analysis, network planning, G_CELLCHG_NACC_SWI
Unit: None which the MAE provides
these parameters based on the built-in
INTER_RAT_OUT_SWITC
MR_LCS_MEAS_SWITCH default
network
This optimization,
command is usedandto TCH,
H,
_10, objects values
that are
Fixed-value
that cannot be
filtered
parameters:
call history analysis. Default Value: EMS
HO_INTER_RAT_PS_3G2 modified
according by users.
algorithm MAE
The
to parameters
set RNC-level or cell-level includes the –
PERFENH_INACTIVE_F2
MR_RACH_MEAS_SWITC
Unit: None
G_RELOCATION_SWITC delivers the
requirements. fixed values for
of
MR switches. P_SWITCH,
H_11, which the MAE provides built-in
H, these parameters based on the
PERFENH_NB_AMRC_UL
MR_INTER_FREQ_MEAS default
objects values
that are that cannot be
filtered
This command is used to HO_INTER_RAT_PS_OUT Fixed-value parameters:
Default Value: ByRnc
_RATESET_EXT_SWITCH
_CTRL_SWITCH_12, modified
according by users.
algorithm MAE
The
to parameters
set RNC-level or cell-level includes the –
_SWITCH,
,Unit: None
MR_INTER_RAT_MEAS_ delivers the
requirements. fixed values for
of
MR switches. which the MAE provides
HO_INTER_RAT_RNC_SE
PERFENH_DC_USERNU
CTRL_SWITCH_13 these parameters based built-in
on the
RVICE_HO_SWITCH, default
objects values
that arethat cannot be
filtered
This command is used to Default
Unit: Value: OFF, ON,
M_LDB_OPT_SWITCH,
None Fixed-value parameters:
HO_INTRA_FREQ_DETS modified bytousers. The MAE
set RNC-level or cell-level PERFENH_DCH_TRCH_O according
DEPEND_CELL_SWITCH includes
delivers
algorithm
the fixed
the parameters
values for
of
–
MR switches. ET_INTO_ACTSET_SWIT
Unit: None
PT_SWITCH, requirements.
which the MAE provides built-in
CH, these parameters based on the
Use this command to set PERFENH_RB_MAPPING default
objects values
that are that cannot be
filtered
the connection-oriented HO_INTRA_FREQ_DETS
_OPT_SWITCH, Fixed-value
modified by parameters:
users.
ET_RPRT_SWITCH, accordingthe algorithm MAE
The
to parameters –
algorithm parameters of a PERFENH_U2L_REDIR_ includes
delivers the
requirements. fixed values for
of
RNC. HO_INTRA_FREQ_HARD which the MAE provides
WITH_BLACK_CELL_SWI these parameters based on the built-in
Use this command to set _HO_SWITCH,
TCH, default
objects values
that are that cannot be
filtered
the connection-oriented HO_INTRA_FREQ_RPRT_ Fixed-value
modified by parameters:
users.
PERFENH_UL_RL_FAIL_ according
includes algorithm MAE
The
to parameters
the –
algorithm switches of a 1J_SWITCH,
SRV_CELL_CHG_SWITC which delivers the
requirements. fixed values for
of
RNC. HO_INTRA_FREQ_SOFT_ the MAE provides
these parameters based on the built-in
H,
Default Value: default values
Use this command to HO_SWITCH,
PERFENH_HO_SIGNAL_ objects that arethat cannot be
filtered
RsvdSwPara2_bit9,
HO_MC_MEAS_BEYOND modified
according to algorithm MAE
by users. The
modify reserved eNodeB- SCENE_CTRL, –
RsvdSwPara2_bit10
_UE_CAP_SWITCH, delivers the fixed values of
requirements.
level parameters. PERFENH_PS_CMTIMEO
Unit: None
HO_MC_NCELL_COMBIN these parameters based on the
UT_UP_LIMIT_SWITCH, objects that are filtered
E_SWITCH,
PERFENH_SPEC_PRD_H according to algorithm
HO_MC_SIGNAL_IUR_IN
HO_DELAY_TIME_SWITC requirements.
08/24/2023 华为保密信息,未经授权禁止扩散
TRA_SWITCH,
H, 第20页，共633页
HO_MC_SIGNAL_SWITC
PERFENH_BASE_COV_B
H,
E_E2D_10MS_OFF_SWIT
HO_MC_SNA_RESTRICTI
CH,
 Fixed-value parameters:
686970386.xls 文档密级
includes the parameters for
Default Value: which the MAE provides built-in
Use this command to COLLISION_DETECT_SW default values that cannot be
modify the configuration of ITCH, modified by users. The MAE
–
eNodeB-level algorithm CONFUSION_DETECT_S Range-value parameters:
delivers the fixed values of
switches. WITCH include
these parameters basedfor
the parameters on the
Use this command to add a Unit: None which
objectsthe
thatMAE
are calculates
filtered
missing inter-frequency Value Range: 0 to 19 optimization
according to values according
algorithm
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm
requirements. requirements
group. In this command. include
the valuetherange
parameters
of eachfor
Use this command to add a which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 19 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Value Range: ONE(One
Use this command to add a which the MAE calculates
Group), TWO(Two Group), parameter on the MAE client or
missing inter-frequency optimization
on NEs. values according
THREE(Three Group), Range-value parameters: and –
neighboring cell detection to algorithm requirements
FOUR(Four Group) include
group. In this command. Value Range: Band1, the value range of eachfor
the parameters
Use this command to add a Unit: None which the MAE
parameter on thecalculates
MAE client or
Band2, Band3, Band4,
missing inter-frequency optimization
on NEs. values according
Band5, Band6, Band7, Range-value parameters: –
neighboring cell detection to algorithm requirements and
Band8, Band9 include therange
parameters
group. In this command. the value of eachfor
Use this command to add a Unit: None which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 16383 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: –
neighboring cell detection Unit: None to algorithm requirements and
group. In this command. include
the valuetherange
parameters
of eachfor
Use this command to add a which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Value Range: Band1,
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
Band2, Band3, Band4,
missing inter-frequency optimization
on NEs. values according
Band5, Band6, Band7, Range-value parameters: –
neighboring cell detection to algorithm requirements and
Band8, Band9 include therange
parameters
group. In this command. the value of eachfor
Use this command to add a Unit: None which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 16383 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: –
neighboring cell detection Unit: None to algorithm requirements and
group. In this command. include
the valuetherange
parameters
of eachfor
Use this command to add a which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Value Range: Band1,
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
Band2, Band3, Band4,
missing inter-frequency optimization
on NEs. values according
Band5, Band6, Band7, Range-value parameters: –
neighboring cell detection to algorithm requirements and
Band8, Band9 include therange
parameters
group. In this command. the value of eachfor
Use this command to add a Unit: None which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 16383 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: –
neighboring cell detection Unit: None to algorithm requirements and
group. In this command. include
the valuetherange
parameters
of eachfor
Use this command to add a which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Value Range: Band1,
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
Band2, Band3, Band4,
missing inter-frequency optimization
on NEs. values according
Band5, Band6, Band7, –
neighboring cell detection to algorithm requirements and
Band8, Band9
group. In this command. the value range of each
Unit: None
parameter on the MAE client or
on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第21页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
Use this command to add a which the MAE calculates
missing inter-frequency Value Range: 0 to 16383 optimization values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Use this command to add a which the MAE
parameter on thecalculates
MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: –
neighboring cell detection Unit: None to algorithm requirements and
group. In this command. include
the value therange
parameters
of eachfor
Use this command to add a which the MAE calculates
parameter on the MAE client or
missing inter-frequency Value Range: 0 to 511 optimization
on NEs. values according
Range-value parameters: and –
neighboring cell detection Unit: None to algorithm requirements
group. In this command. include
the value range of eachfor
the parameters
Use this command to which the MAE
parameter on thecalculates
MAE client or
remove a missing inter- Value Range: 0 to 19 optimization
on NEs. values according
–
frequency neighboring cell Unit: None to algorithm requirements
Identity-related parameters: and
detection
Use group. to add
this command the value
include range of each
parameters such as
parameters for self- GUI Value Range: 0 to parameter
CellId, on theMCC,
IDTYPE, MAE and
clienttheor
organizing network (SON) 65535 on NEs.
MOC primary key and foreign –
Use this neighboring
missing command tocell add Unit: None Identity-related
key parameters.parameters:
The MAE does
parameters
detection. for self- include parameters
not optimize suchofas
the values these
organizing network (SON) GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
missing neighboring cell 65535 MOC primaryparameters:
Range-value key and foreign –
Use this command
detection to add Unit: None
and neighboring key parameters. The MAE
include the parameters for does
parameters for self-
cell configuration not optimize thecalculates
values of these
Value Range: OFF, which the MAE
organizing
optimization. network (SON) parameters.
DetectByGroup, optimization values according
missing neighboring cell Range-value parameters: and –
Use this command to add DetectByRotateNbr to algorithm requirements
detection and neighboring include
parameters for self- Unit: None the value range of eachfor
the parameters
cell configuration which the MAE calculates
organizing network (SON) parameter on the MAE client or
optimization. Value Range: 0 to 19 optimization values according
missing neighboring cell on NEs. –
Use this command to Unit: None to algorithm requirements
Identity-related parameters: and
detection and neighboring
modify parameters for self- the value
include range of each
parameters such as
cell configuration
organizing network (SON) GUI Value Range: 0 to parameter
CellId, on theMCC,
IDTYPE, MAE and
clienttheor
optimization.
missing neighboring cell 65535 on NEs.
MOC primaryparameters:
Range-value key and foreign –
Use this command
detection to
and neighboring Unit: None key parameters. The MAE
Use thisparameters
command to add Value Range: OFF(OFF), include the parameters for does
modify
cell configuration for self-a not optimize thecalculates
values of these
missing GSM neighboring DetectByGroup(DetectByG which the MAE
organizing
optimization network (SON) parameters.
cell detection
missing neighboring In this roup),
group. cell optimization values according
Range-value parameters: and –
Use this
command, command
you need toto DetectByRotateNbr(Detect to algorithm requirements
detection and neighboring include
modify
specify parameters
the number for self- ByRotateNbr)
of GSM the value range of eachfor
the parameters
cell configuration which the MAE calculates
organizing
optimizationnetwork
neighboring (SON) Unit: None
cell detection parameter on the MAE client or
Value Range: 0 to 19 optimization
on NEs. values according
missing neighboring
objects, network color cell
code Unit: None Range-value parameters: –
to algorithm requirements and
detection
(NCC) and base
range, neighboring
station include therange
parameters
the value of eachfor
cell configuration
color code (BCC) range, which the MAE calculates
parameter on the MAE client or
optimization
and the frequency range. Value Range: 0 to 19 optimization values according
on NEs.
Range-value parameters: and –
Unit: None to algorithm requirements
The missing GSM include
the value range of eachfor
the parameters
neighboring cell detection which the MAE
parameter on thecalculates
MAE client or
Use this command to add a
function neighboring
detects adjacent Value Range: 0 to 19 optimization
on NEs. values according
missing GSM Range-value parameters: –
GSM cells thatgroup.
are missed Unit: None to algorithm requirements and
cell detection include therange
parameters for
to be configured as a the value of each
which the MAE calculates
Use this command
neighboring a add a Value Range: ONE, TWO, parameter
cell for to optimization
on the
values
MAE client or
according
missing
UMTS cell. neighboring GSM THREE, FOUR on NEs.
Range-value parameters: –
to algorithm requirements and
cell detection group. Unit: None include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter on thecalculates
MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM –
Unit: None to algorithm requirements and
cell detection group.
the value range of each
parameter on the MAE client or
on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第22页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
which the MAE calculates
Use this command to add a
Value Range: 0 to 7 optimization values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
Value Range: the value range of eachfor
the parameters
which the MAE calculates
Use this command to add a GSM900_DCS1800_BAND parameter on the MAE client or
optimization
on NEs. values according
missing neighboring GSM _USED, Range-value parameters: and –
to algorithm requirements
cell detection group. PCS1900_BAND_USED include
the value range of eachfor
the parameters
Unit: None which the MAE calculates
Use this command to add a parameter on the MAE client or
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
Value Range: the value range of eachfor
the parameters
which the MAE calculates
Use this command to add a GSM900_DCS1800_BAND parameter on the MAE client or
optimization
on NEs. values according
missing neighboring GSM _USED, Range-value parameters: and –
to algorithm requirements
cell detection group. PCS1900_BAND_USED include
the value range of eachfor
the parameters
Unit: None which the MAE calculates
Use this command to add a parameter on the MAE client or
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
Value Range: the value range of eachfor
the parameters
which the MAE calculates
Use this command to add a GSM900_DCS1800_BAND parameter on the MAE client or
optimization
on NEs. values according
missing neighboring GSM _USED, Range-value parameters: and –
to algorithm requirements
cell detection group. PCS1900_BAND_USED include
the value range of eachfor
the parameters
Unit: None which the MAE calculates
Use this command to add a parameter on the MAE client or
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM –
Unit: None to algorithm requirements and
cell detection group.
the value range of each
parameter on the MAE client or
on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第23页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
which the MAE calculates
Use this command to add a
Value Range: 0 to 1023 optimization values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter on the calculates
MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
which the MAE
parameter on the calculates
MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 7 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
Value Range: the value range of eachfor
the parameters
which the MAE calculates
Use this command to add a GSM900_DCS1800_BAND parameter on the MAE client or
optimization
on NEs. values according
missing neighboring GSM _USED, Range-value parameters: and –
to algorithm requirements
cell detection group. PCS1900_BAND_USED include
the value range of eachfor
the parameters
Unit: None which the MAE calculates
Use this command to add a parameter on the MAE client or
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: –
Unit: None to algorithm requirements and
cell detection group. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to add a
Value Range: 0 to 1023 optimization
on NEs. values according
missing neighboring GSM Range-value parameters: and –
Unit: None to algorithm requirements
cell detection group. include
the value range of eachfor
the parameters
Use this command to which the MAE
parameter on the calculates
MAE client or
remove a missing Value Range: 0 to 19 optimization
on NEs. values according
–
neighboring GSM cell
Use this command to add Unit: None to algorithm requirements
Identity-related parameters: and
detection group.
parameters for self- the value
include range of each
parameters such as
organizing network (SON) GUI Value Range: 0 to parameter
CellId, on theMCC,
IDTYPE, MAE and
client
theor
missing neighboring cell 65535 on NEs.
MOC primaryparameters:
Range-value key and foreign –
Use this command
detection to add Unit: None
and neighboring key parameters. The MAE
include the parameters for does
parameters for
cell configurationself- not optimize thecalculates
values of these
Value Range: OFF, which the MAE
organizing
optimization.network (SON) parameters.
DetectByGroup, optimization values according
missing neighboring cell Range-value parameters: and –
Use this command to add DetectByRotateNbr to algorithm requirements
detection and neighboring include
parameters for self- Unit: None the value range of eachfor
the parameters
cell configuration which the MAE calculates
organizing network (SON) parameter on the MAE client or
optimization. Value Range: 0 to 19 optimization values according
missing neighboring cell on NEs. –
Use this command to Unit: None to algorithm requirements
Identity-related parameters: and
detection and neighboring
modify parameters for self- the value
include range of each
parameters such as
cell configuration
organizing network (SON) GUI Value Range: 0 to parameter
CellId, on theMCC,
IDTYPE, MAE and
client
theor
optimization.
missing neighboring cell 65535 on NEs.
MOC primaryparameters:
Range-value key and foreign –
Use this command
detection to
and neighboring Unit: None key parameters. The MAE
include the parameters for does
modify parameters
cell configuration for self- not optimize thecalculates
values of these
Value Range: OFF, which the MAE
organizing
optimization.network (SON) parameters. values according
DetectByGroup, optimization
missing neighboring cell Range-value parameters: and –
Use this command to DetectByRotateNbr to algorithm requirements
detection and neighboring include
modify parameters for self- Unit: None the value range of eachfor
the parameters
cell configuration which the MAE calculates
organizing network (SON) parameter
Fixed-value on the MAE client or
parameters:
optimization. Value Range: 0 to 19 optimization values according
missing neighboring cell on NEs. the parameters
includes –
Unit: None to algorithm requirementsfor and
detection and neighboring which the range
MAE provides
the value of each built-in
cell configuration default values thatMAE
cannot be or
Use this command to query Default Value: parameter
Fixed-value on the
parameters: client
optimization. modified by users. The MAE
call control UTRAN system HORIZONTAL on NEs. the parameters for
includes Involved
delivers the fixed values of
messages of a cell. Unit: None which the MAE provides
these parameters based built-in
on the
Use this command to set default values that
objects that are filteredcannot be
call control UTRAN system Default Value: BYID modified
accordingbytousers. The MAE
algorithm Involved
message parameters of a Unit: None delivers the
requirements. fixed values of
cell. these parameters based on the
objects that are filtered
according to algorithm
requirements.
08/24/2023 华为保密信息,未经授权禁止扩散 第24页，共633页
 686970386.xls 文档密级
Identity-related parameters:
include parameters such as
Use this command to set
GUI Value Range: 0 to CellId, IDTYPE, MCC, and the
call control UTRAN system
2047 MOC primaryparameters:
Range-value key and foreign Involved
message parameters of a
Unit: None key parameters.
include The MAE
the parameters for does
cell.
Use this command to set not optimize
which the MAE thecalculates
values of these
call control UTRAN system Value Range: 0 to 15 parameters.
optimization values according
Range-value parameters: and Involved
message parameters of a Unit: None to algorithm requirements
cell. include
the value range of eachfor
the parameters
Use this command to set which the MAE
parameter on thecalculates
MAE client or
call control UTRAN system Value Range: 0 to 3 optimization
on NEs. values according
Range-value parameters: Involved
message parameters of a Unit: None to algorithm requirements and
cell. include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to set
Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: and –
Unit: dB to algorithm requirements
of the BSC. include
the value range of eachfor
the parameters
which the MAE
parameter on thecalculates
MAE client or
Use this command to set
Value Range: 0 to 63 optimization
on NEs. values according
other software parameters Range-value parameters: –
Unit: dB to algorithm requirements and
of the BSC. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to set
Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: and –
Unit: dB to algorithm requirements
of the BSC. include
the value range of eachfor
the parameters
which the MAE
parameter on thecalculates
MAE client or
Use this command to set
Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: –
Unit: dB to algorithm requirements and
of the BSC. include therange
parameters
the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command to set
Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: and –
Unit: dB to algorithm requirements
of the BSC. include
the value range of eachfor
the parameters
which the MAE
parameter on thecalculates
MAE client or
Use this command to set
Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: –
Unit: dB to algorithm requirements and
of the BSC. include therange
parameters
1. Identity-related the value of eachfor
which the MAE calculates
parameter on the MAE client or
Use this command
parameters: includeto set Value Range: 0 to 127 optimization
on NEs. values according
other software
parameters parameters
such as CellId, Range-value parameters: and –
Unit: dB to algorithm requirements
of the BSC. include
IDTYPE, MCC, and the the value range of eachfor
the parameters
MOC primary key and which the MAE
parameter on thecalculates
MAE client or
Use this command to set
foreign key parameters. Value Range: 0 to 127 optimization
on NEs. values according
other software parameters Range-value parameters: –
The MAE does not optimize Unit: dB to algorithm requirements and
of the BSC. include therange
parameters
the values of these the value of eachfor
parameters. which the MAE calculates
parameter on the MAE client or
Use this command to set
2. Fixed-value Value Range: 0 to 127 optimization
on NEs. values according
other software parameters:
parameters Range-value parameters: and –
includes the parameters for Unit: dB to algorithm requirements
of the BSC. include
which the MAE provides the value range of eachfor
the parameters
which the MAE
parameter on calculates
the MAE client or
Use thisdefault
built-in commandvaluesto set
that Fixed-value parameters:
Value Range: 0 to 127 optimization values
on NEs. the parameters according
other software parameters includes –
cannot be modified by Unit: dB to algorithm requirementsfor and
of the BSC. which the range
MAE provides
users. The MAE delivers the value of each built-in
Use this command
the fixed to start
values of these default
parametervalues thatMAE
on the cannot be or
client
the customized
parameters based on the Default Value: BYID modified
on NEs. by users. The MAE
–
measurement
objects that areoffiltered
a Unit: None delivers the fixed
Identity-related values of
parameters:
neighboring
according cell.
to algorithm these parameters
include parametersbased such on
as the
Use this command to start objectsIDTYPE,
that are filtered
requirements. GUI Value Range: 1 to CellId, MCC, and the
the customized according to algorithm
3. Fixed-value of parameters: 32768 characters MOC primary
Range-value key and foreign
parameters: –
measurement a requirements.
include the parameters for Unit: None key parameters.
include The MAE
the parameters for does
neighboring cell.
Use this
which thecommand to start
MAE provides not optimize
which the MAE thecalculates
values of these
Value Range: 1 to 800 parameters. values according
the customized
built-in default values that optimization
characters Range-value parameters: and –
measurement
are displayed on of athe MAE to algorithm requirements
Unit: None include
neighboring cell.
client and can be modified the value range of eachfor
the parameters
which the MAE
parameter on thecalculates
MAE client or
by users. The MAE delivers Value Range: 1 optimization values according
the fixed values of these on NEs. –
Unit: 15min to algorithm requirements and
parameters based on the the value range of each
objects that are filtered parameter on the MAE client or
according to algorithm on NEs.
requirements.
4. Range-value
08/24/2023
parameters: include the 华为保密信息,未经授权禁止扩散 第25页，共633页
parameters for which the
MAE calculates
optimization values
foreign key parameters.
The MAE does not optimize
the values of these
parameters. 686970386.xls 文档密级
2. Fixed-value parameters: Range-value parameters:
includes the parameters for include the parameters for
which
Use thisthecommand
MAE provides to start which the MAE calculates
built-in default values that
the customized Value Range: OFF, ON optimization values according
cannot be modified –
measurement of a by Unit: None to algorithm requirements
Identity-related parameters: and
users. The MAE
neighboring cell. delivers the value
include range of each
parameters such as
Use this command
the fixed values of these to stop parameter on theMCC,
MAE andclient
GUI Value Range: 1 to CellId, IDTYPE,
Fixed-value parameters: theor
the customized
parameters based on the on NEs.
32768 characters MOC primary
includes key and foreign
the parameters for –
measurement
objects that areoffiltered
a
Unit: None key parameters.
which The MAE
the MAE provides does
built-in
neighboring cell.
according to algorithm not optimize
default values the values
that of these
cannot be
Use this command to query
requirements. Default Value: Fixed-value
parameters. parameters:
modified by users. The MAE
the
3. Fixed-valuecontrol
handover HORIZONTAL includes the parameters Involved
parameters: delivers the fixed values for
of
parameters of a cell. for Unit: None which the MAE provides
include the parameters these parameters based built-in
on the
Use this
which thecommand
MAE provides to query default
objects values
that arethat cannot be
filtered
Default Value:
the information
built-in about that
default values the modified
accordingbytousers.
algorithmThe MAE
HORIZONTAL _
customized
are displayed neighboring
on the MAE delivers the
requirements. fixed values of
Unit: None Non-MAE-optimized
cell measurement
client task.
and can be modified these parameters based on the
parameters:
objects that are include the non-
filtered
by users. The MAE delivers identity-related parameters that
the fixed values of these NA according to algorithm Involved
the MAE
requirements.does not optimize.
parameters based on the Non-MAE-optimized
The MAE obtains the values of
objects that are filtered parameters:
these parameters include theNEs.
from non-
Use this command to
according to algorithm identity-related parameters that
instruct an NE to download NA Involved
requirements. the MAE does not optimize.
measurement files. Non-MAE-optimized
4. Range-value The MAE obtains the values of
parameters:
these parameters include theNEs.
from non-
parameters:
Use includetothe
this command
identity-related parameters that
parameters
instruct an NEfor to
which the
download NA Range-value Involved
the MAE doesparameters:
not optimize.
MAE calculatesfiles.
measurement include theobtains
parameters for of
The MAE the values
optimization values which the MAE calculates
Use this command to Value Range: 0 to 255 these parameters from NEs.
according to algorithm optimization values according
instruct an NE to download
requirements and the value characters Range-value parameters: and Involved
to algorithm requirements
measurement
range of each files. Unit: None include
parameter the value range of eachfor
the parameters
on the MAE client ortoon which the MAE
parameter on the calculates
MAE client or
Use this command start Value Range: 1 to 64
NEs. optimization
on NEs. values according
the customized neighboring characters Range-value parameters: Involved
5. to algorithm requirements and
cellNon-MAE-optimized
measurement. Unit: None include therange
parameters
parameters: include the the value of eachfor
which the
parameter on MAE calculates
the MAE client or
Use this command to stop
non-identity-related Value Range: 1 to 64 Fixed-value parameters:
optimization values according
on NEs.the parameters
the
parameters thatneighboring
customized the MAE characters include forand Involved
to algorithm requirements
cell
doesmeasurement. Unit: None which
not optimize. The Value Range: the value range of each built-in
the MAE provides
Use
MAEthis command
obtains the valuesto of default values that cannot be
VQM_ALGO_SWITCH_OF parameter on the MAE client or
modify the configuration
these parameters from of modified
on NEs. by users. The MAE
F, –
eNodeB-level
NEs. algorithm delivers the fixed values of
VQM_ALGO_SWITCH_ON
switches.
注: 第5类专指同一个MO对 these parameters based on the
Unit: None
象的非标识类参数, 从网络 objects that are filtered
上读取直接赋值。如果跨 according to algorithm
MO对象的算第4类, 如外部 requirements.
邻区添加、关联参数修改。

08/24/2023 华为保密信息,未经授权禁止扩散 第26页，共633页

 686970386.xls 文档密级

LTE
UMTS UMTS
UBLind_A Overlappe UMTS
G2G ANR G2L ANR U2G ANR ANR ANR U2L ANR
NR d ACCO
(U-Intra) (U-Inter)
Detection

– – – Involved
CONN_SE Involved
CONN_SE – Involved – Involved
TUP TUP
CS_RAB_
RRC_REL RRC_REL
SETUP
EASE EASE CONN_SE
– – – – PS_RAB_ –
FHHO FHHO TUP
SETUP
INTRA_FR INTER_FR
HHO
EQ_NET_ EQ_NET_
– – – OPT
– OPT
– – – – –
MR_PRD_
INTRA_FR
EQ_MEAS
– – – Involved Involved – Involved – Involved
_SWITCH
_1
MR_EVT_I
– – – Involved Involved – Involved – NTRA_FR
Involved
EQ_MEAS
_SWITCH
_2
– – – Involved Involved – Involved – Involved
MR_PRD_
INTER_FR
EQ_MEAS
– – Involved
TRAFFIC_ Involved
TRAFFIC_ Involved
TRAFFIC_ – – – _SWITCH
Involved
TRAFFIC_
MR_PRD_ MR_PRD_
AMR AMR AMR _3
AMR
INTER_RA INTER_FR
TRAFFIC_ TRAFFIC_ TRAFFIC_ MR_EVT_I
TRAFFIC_
T_MEAS_ EQ_MEAS
VP MR_PRD_
VP VP NTER_FR
VP
– – SWITCH_ _SWITCH – – –
TRAFFIC_ INTRA_FR
TRAFFIC_ TRAFFIC_ EQ_MEAS
TRAFFIC_
5 _3
BE EQ_MEAS
BE BE _SWITCH
BE
MR_EVT_I MR_EVT_I
TRAFFIC_ _SWITCH
TRAFFIC_ TRAFFIC_ _4
TRAFFIC_
NTER_RA NTER_FR
OTHER _1
OTHER OTHER MR_PRD_
OTHER
– – T_MEAS_ EQ_MEAS – – –
MR_EVT_I INTER_RA
SWITCH_ _SWITCH
NTRA_FR T_MEAS_
6 _4 LCS_CEL
EQ_MEAS SWITCH_
MR_INTE MR_INTE LID_RTT_
– – – _SWITCH
– – – – – 5
R_RAT_M R_FREQ_ SWITCH_
_2 MR_EVT_I
EAS_CTR MEAS_CT 3
NTER_RA
L_SWITC RL_SWIT
T_MEAS_
– – H_13
Involved Involved CH_12
Involved – – – Involved
SWITCH_
6
MR_DL_B
– – Involved Involved Involved – – – LER_MEA
Involved
S_SWITC
H_7
MR_UE_T
– – Involved Involved Involved – – – Involved
X_POWE
PERFENH PERFENH R_MEAS_
_INITIAL_ _INITIAL_ SWITCH_
– – NCELLDE – NCELLDE – – – 8
–
TECT_SW TECT_SW MR_LCS_
ITCH HO_INTR ITCH MEAS_S
A_FREQ_ WITCH_10
– – – DETSET_ – – – – –
RPRT_SW
ITCH
– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第27页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第28页，共633页

 686970386.xls 文档密级

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – – – Involved – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第29页，共633页

 686970386.xls 文档密级

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第30页，共633页

 686970386.xls 文档密级

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– – Involved – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第31页，共633页

 686970386.xls 文档密级

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

Involved – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第32页，共633页

 686970386.xls 文档密级

Involved – – – – – – – –

Involved – – – – – – – –

Involved Involved – – – – – – –

Involved _ _ _ _ _ _ _ _

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第33页，共633页

 686970386.xls 文档密级

Whether Switch Options Are Involved/Involved Switch Options

GSM
UMTS
LTE Frequency UMTS- LTE U-INTER UMTS
LTE PCI HetNet LTE MLB
ACCO Optimizati PSC CODC MLB MRO
Idle Mode
on

– – Involved – – – – – Involved
CONN_SE
TUP
CONN_SE
HHO
TUP,
FHHO
– – RRC_REL – – – – –
SYS_HO_
EASE,
OUT
FHHO
CS_RAB_
COMPRE
– – – – – – – – REL
SS_MODE
_INFO

– – Involved – – – – – Involved

– – Involved – – – – – Involved

– – Involved – – – – – Involved

– – – – – – – – Involved
TRAFFIC_
AMR
TRAFFIC_
MR_PRD_
VP
– – – – – – – – INTER_FR
TRAFFIC_
EQ_MEAS
BE
_SWITCH
TRAFFIC_
_3
OTHER
– – – – – – – –
MR_EVT_I
NTER_FR
EQ_MEAS
– – – – – – – – _SWITCH
–
_4

– – – – – – – – Involved

– – – – – – – – Involved

– – – – – – – – Involved

– – – – – – – – –

– – – – – – – – –

RsvdSwPa
ra2_bit9
– – – – – – – –
RsvdSwPa
ra2_bit10

08/24/2023 华为保密信息,未经授权禁止扩散 第34页，共633页

 686970386.xls 文档密级

CONFUSI
ON_DETE
– – – – – – – –
CT_SWIT
CH

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第35页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第36页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第37页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第38页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

– Involved – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第39页，共633页

 686970386.xls 文档密级

– Involved – – – – – – –

– Involved – – – – – – –

– – – – – – – – –

_ Involved _ _ _ _ _ _ _

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第40页，共633页

 686970386.xls 文档密级

s
MBB MBB
LTE Multi-
UMTS UMTS Traffic Traffic
UMTS IPO GSM ESM LTE ESM UMTS IIM carrier
ESM Railway Migration - Migration -
Strategy
G2U U2L

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第41页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第42页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第43页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第44页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第45页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第46页，共633页

 686970386.xls 文档密级

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

_ _ _ _ _ _ _ _ _

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

– – – – – – – – –

08/24/2023 华为保密信息,未经授权禁止扩散 第47页，共633页

 686970386.xls 文档密级

LTE
Bottom
UMTS LTE
User
Massive Massive
Throughpu
Event Event
t
Handling Handling
Optimizati
on
– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第48页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第49页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第50页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第51页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第52页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第53页，共633页

 686970386.xls 文档密级

– – –

– – –

– – –

_ _ –

– – –

– – –

– – –

– – –

– – –

– – –

– – –

08/24/2023 华为保密信息,未经授权禁止扩散 第54页，共633页

 686970386.xls 文档密级

Optimizatio Base station color code (BCC)

MML Command Parameter Parameter Description NE
n Type of a cell, provided by the
network planning department.
Missing It is used for differentiating the
ADD
neighboring BCC neighboring cells using the GBSC
GEXT2GCELL
cells same BCCH frequency. A BCC
and a network color code
Missing (NCC) compose
neighboring
ADD
BCCH
BCCH
Identity code of aaof
frequency base
cell, station
anAexternal
cell is GBSC
GEXT2GCELL identity
cell. code
2Gwireless
a (BSIC).area
coverage
cells
identified by a base station
Missing identity code and a global cell
ADD
neighboring CI identification. Can be input in GBSC
GEXT2GCELL This parameter is used for
cells hexadecimal format. The
ID
quickof the cell.
handover The
hexadecimal format is H'**** or cell
decisions. ID
Missing cannot
Quick conflict
h'****, handover with other be cell
neighboring
ADD
EXT2GCELLID Name
IDs in
for
of the
the cell.canH'1214
example,
BSC6900. The cells
or
GBSC
GEXT2GCELL triggered
h'1214.
Cell names only whencontain
cannot the the
cells in the BSC
following are numbered
condition is met:
following
sequentially. invalid characters:
Missing Path
, ; = "loss' in the serving cell -
ADD Path loss incellchain neighboring
neighboring EXT2GCELLNAME In addition, names cannot GBSC
GEXT2GCELL cell > The quick handover
cells contain two or more
trigger
consecutive threshold %, two or more
Missing The quick
consecutive handover
spaces, trigger or more
ADD
neighboring HOOFFSET threshold
Handover
than three isthreshold
the sum during
consecutive of +. the GBSC
GEXT2GCELL To avoid ping-pong handover,
cells "HOOFFSET"
handovers in "SET
the receivedbetween
GCELLHOFAST" signalinofthe cells
thecase on
of
Missing different
original layers or of different
ADD internal serving
priorities. neighboring
This
cell iscells or in
value is used to
neighboring HOPUNISHVALUE decreased
"MOD GEXT2GCELL" by "Quick handover in the GBSC
GEXT2GCELL suppress inter-layer ping-pong
cells punish
case value"
of external in "Quick
neighboring
handovers.
handover punish time" after
Missing cells and "ADJHOOFFSET"
Inter-layer handover threshold
ADD fast handover
configured succeeds.
by cell
the neighboring
neighboring HOTHRES of the serving = "Inter-layer GBSC
GEXT2GCELL cell.threshold"
The actual- value of thisHO
cells HO "Inter-layer
parameter
Hysteresis";
A service support is equalattribute
to the GUI of a
Missing value
Inter-layerminus 64.
ADD cell, that is,handover
whether threshold
an
neighboring ISEDGESUPPORT of a neighboring GBSC
GEXT2GCELL external GSM cellcell = "Inter-
supports
cells layer
EDGEHO Threshold" +
A service support
"Adjacent Cell code attributeHO
Inter-layer of a
Missing Location area (LAC). MS
ADD cell, that
Hysteresis" is, whether an
- 64. in the local
neighboring ISGPRSSUPPORT can freely move GBSC
GEXT2GCELL external GSM cell supports
cells location
A network area with no
consists ofneedfour of
GPRS
A service
location
layers, support
update.
namely, attribute of a
Reasonable
Umbrella,
Missing
ADD cell,
local
Macro, that is, whether
allocation
Micro, canPico.
and an Cell
effectively
neighboring ISNC2SUPPORT GBSC
GEXT2GCELL externalthe
lighten
priorities GSM
influence cell supports
signaling the load sortingand
cells
NC2
improve
of neighboring the callcells completion
during
Missing rate.
handovers as well as handover
ADD
neighboring LAC The LAC isincluding
algorithms a 2-byte PBGT and GBSC
GEXT2GCELL
cells hexadecimal
inter-layer handovers. code. It ranges For
Threshold
from 0000PBGT
example, for allowing
to FFFF(ffff).
handovers MSsThecan to
Missing hand
codes over
0000amongfrom other
and FFFE(fffe) cells toare
ADD only occur cells on the
neighboring LAYER the cell. If The
the cell GBSC
GEXT2GCELL reserved.
same layer and LACof load
cansame
the isbe lower
cells than
input the threshold
priority in level.
hexadecimal If youspecifiedformat.by
assign
this
The parameter,
hexadecimal
different layers and priorities MSsformat are is to
Missing
ADD allowed
H'****
a 1800-M or to hand
h'****,
cell over
for
and from
example,
a 900-M
neighboring LoadAccThres GBSC
GEXT2GCELL other
Indicates
H'1214
cell, cells
PBGT orthat to
h'1214.the
if a cell.
handovers 2G Iffrom the cellthe
cells
load is
neighboring higher than
cell
1800-M cell to the 900-M cell or
supports equal loadto
Missing the threshold
handovers, the specified
will not occur. This causes slowBSC adds by this
the
ADD parameter, MSs are notthe
neighboring LoadHoEnExt2G load information
handovers even of
whenthe local GBSC
GEXT2GCELL allowed to hand over from
cells cells
Mobile in
receivecountry the signaling
signal quality code. This is
other
procedures
parameter
favorable. cells identifies
torelated
the cell. tothe this
Missing neighboring cell.
ADD country where a mobile
neighboring MCC GBSC
GEXT2GCELL subscriber is located, for
cells
example, the Chinese MCC is
460.

08/24/2023 华为保密信息,未经授权禁止扩散 第55页，共633页

 686970386.xls 文档密级

Mobile network code. This

Missing parameter identifies the public
ADD Minimum downlink
neighboring MNC land mobile networkreceive (PLMN) to GBSC
GEXT2GCELL level of candidate neighboring
cells which a mobile subscriber
cells.
belongs.
Missing The following conditions must
ADD
neighboring MSRXMIN be met: color code that is
Network GBSC
GEXT2GCELL
cells Downlink by
provided receive
the telecom level of
neighboring
operator. Thecells NCC >=isValue used of to
Missing "MSRXMIN" + Value
ADD identify networks fromofarea to
neighboring NCC "MINOFFSET". GBSC
GEXT2GCELL area.parameter
This The NCC controls is uniquethe
cells
nationwide.
handovers among cells on a
Missing The BCC
same layer. and A thesmall NCC form
priority
ADD the BSIC.
neighboring PRIOR value indicates a high priority. GBSC
GEXT2GCELL
cells Cells with high priorities are
preferentially
Routing area selected
code for aas the
Missing handover target
ADD neighboring cell.cells. A routing area
neighboring RA Period is GBSC
GEXT2GCELL is usedinforwhich the SGSN level penaltyto
cells performed
Difference on the neighboring
manage thebetween locationthe of MSs.
cells
downlink of the cell where
receive level aoffast- the
Missing
ADD moving
serving MS
cell is
and located.
that of The
a
neighboring SDPUNTIME Level value of themust penalty that GBSC
GEXT2GCELL neighboring
neighboring cells
cell during be bad
cells is performed on the
located
quality at the Macro,
handovers. This Micro, or
neighboring
Pico layer cellsthan
other of the theis cell
Missing After
parameter the fast handover
is used to MS calculate
ADD where
Umbrella a fast-moving
layer. handover is
neighboring SDPUNVAL successful, the GBSC
GEXT2GCELL the bad quality
located. Thethe penalty oncells
neighboring
cells original
hysteresis servingbasedatonthecell istheMacro,
must be located
performed
following
Difference
Micro, or Pico within
formula:
between layer theother "Quick
the than
Missing
ADD handover
Bad
downlinkquality
the Umbrella punish
handover
receive layer. level ofthe
time": the
neighboring TIMEPUNISH GBSC
GEXT2GCELL receive
Level
hysteresis
serving level
offset
cell of the
for
=andValue the
thatof original
serving
of a cell
cells
serving
when
"INTERCELLHYST"
neighboring cell iscell
handovers decreased
to the
during -Valueedgebyofof
Missing "Quick
a
this handover
neighboring
parameter
handovers duecell topunish
are value",
directed
neighboring ADD G2GNCELL BQMARGIN to
Bad prevent
triggered.
retry. In theping-pong
quality handovers
caseindicates
of Huawei to a GBSC
cells This parameter
handovers.
When
neighboring both "Enhanced
cell can be the
handover
geographical algorithm
relationship II, this
Outgoing
triggered when
parameter Cell
is Handover
used theto following
calculate
Missing between
Offset"
condition and the
is "EDGEneighboring
met: HO cell
neighboring ADD G2GNCELL CHAINNCELLTYPE the
and hysteresis
the serving of handovers
cell. In the GBSC
Allowed"
(Downlink
due are
to directed setretry
receive tolevel
YES(Yes)
using of the the
cells BSC6900,
for a cell, formula:
neighboring if direction
thecell BSC aftertakes A isthe of
filtering -
following
selected, then thelevelHysteresis
reverse
Missing value
Downlink
handovers
According of this dueparameter
receivethetoP/N directed ofintothe
rule, ifretry
direction
account isto
when B. deciding
a
neighboring ADD G2GNCELL DRHOLEVRANGE serving
= Value cell
neighbor of after
"INTERCELLHYST"
cell meets power the to control GBSC
cells trigger
Valuean
-compensation)
conditions of edgethis >handover.
(Valuethe
parameter.
for selecting of That
is, handovers
"INTERCELLHYST"
Handovers
neighbor cell due toto
for the edge
- 64) -of a
directed
edge
Missing According tocell
neighboring
(Value
retry to of
handover this Pthe
a neighboring
in ofcan P/N
parameterN be rule,
cell- canif a
64).
neighboring ADD G2GNCELL EDGEADJLASTTIME neighbor
triggered
The actual
be triggered when cell
when meets
value either
of the
thisof
the followingthe GBSC
measurement reports, the
cells conditions
following
parameter
condition isfor
condition
ismet: selecting
equal is
to met:
the theGUI
edge handover to(Downlink
the neighbor
neighbor
Uplink
value
cell is minus
receive cell64.
receive
level
triggered. for
of leveledge
the of the
neighboring
Missing
handover
serving
cell after
This cell
parameter in after
P ofspecifies
filtering NDownlink
-power control
the
neighboring ADD G2GNCELL EDGEADJSTATTIME GBSC
measurement
compensation
receive level
number reports,
< Value
P. of the serving cell the
of
cells
edge handover
"ULEDGETHRES"
after power control to the + Valueneighbor of
Missing cell
this is triggered.->64
parameter
compensation) (Value of
neighboring ADD G2GNCELL EDOUTHOOFFSET This
Downlinkparameter
"INTERCELLHYST" receive specifies
level of the
-rule,
64) the
-if the GBSC
cells According
number
serving N.
cell toafter
the P/N power control
(Value
conditions of this parameter
for fast handover - 64).
compensation < Value of
Missing are met in P of N measurement
"DLEDGETHRES" + Value of
neighboring ADD G2GNCELL HOLASTTIME reports,
this parameter the handover - 64 is GBSC
cells According
triggered. to the P/N rule, if the
In the casefor
conditions of fast
Huawei handover
This
handoverparameter algorithm specifiesII, the
Missing are
numbermet in
P. P of N measurement
neighboring ADD G2GNCELL HOSTATICTIME handovers
reports, thevalue
Hysteresis tohandover
a better during is the GBSC
cells neighboring
triggered.
handovers between cell can cells be on
triggered
This parameter
different when or
layers both
specifies of thethe
of different
Missing followingN.conditions
number
priorities. This value are is usedmet:to
neighboring ADD G2GNCELL INTELEVHOHYST "Enhanced Outgoingping-pong Cell GBSC
suppress inter-layer
cells Handover Offset" is set to
handovers. The actual value of
YES(Yes).
this parameter is equal to the
Receive
GUI value levelminus of the 64.serving
cell after power control
compensation < Value of
08/24/2023 华为保密信息,未经授权禁止扩散 "HOTHRES" - (Value of 第56页，共633页
"LEVHOHYST" + Value of this
parameter - 64). The actual
value of this parameter is equal
 686970386.xls Whether the cell is a chain 文档密级
Hysteresis value
neighboring cell. The during the
handovers is
parameter between
used incells, the quick This
Missing value
handover is used to suppress
algorithm. Quickping-
neighboring ADD G2GNCELL INTERCELLHYST pong handovers
handover aims tobetween increasecells. the GBSC
cells The actualsuccess
handover value ofrate this of an
parameter
MS movingisatequal a high tospeed
the GUI
Missing valueto minus 64.
and
The ensure
triggering the call
of inter-layer
neighboring ADD G2GNCELL ISCHAINNCELL GBSC
continuity and
handovers must low call the
meet dropP/N
cells
rate.
criteria.Quick handover applies
An inter-layer handover to
Missing thetriggered
is scenariowhen where P an of N MS
neighboring ADD G2GNCELL LEVLAST The
moves triggering
measurement fast along of inter-layer
reportsan urban meet the GBSC
cells handovers
backbonefor
condition must
road, ameet
selected
inter-layer the P/N
criteria. An
route, or areceive
handovers. inter-layer
high-speed
This parameter handover
railroad.
Missing Minimum
is triggered when level N offset.
The target
corresponds
The following cell thePPof
must
tocondition bein a thechain
must P/N
neighboring ADD G2GNCELL LEVSTAT measurement
neighboring
criteria. reports meet
cell. the GBSC
cells be met for a neighboring
condition for inter-layer cell to
be added
handovers. into the candidate
This parameter
Missing Whether
cell queue: to Neighboring
apply penaltycell on a
corresponds
neighboring to the
cell when N inthe the
neighboring ADD G2GNCELL MINOFFSET The
uplink parameter
level >= indicates GBSC
P/N
PBGT criteria.
handover, concentric
cells whether the neighboring
("HOCDCMINUPPWR" +cell is
cell
a handover,
handover neighboring
"MINOFFSET") or hierarchical
and cell,
Missing handover
an
Neighboring in handover
IBCA neighboring cell downlink cell, or level a
neighboring ADD G2GNCELL NCELLPUNEN algorithm
Level
handover
>= Iand
is triggered,
for penalties
("HOCDCMINDWPWR" IBCA in a or + GBSC
cells Level
when threshold
the better
neighboring cell used
cell
during toPBGT,
stop
handover
neighboring
"MINOFFSET").
the timer for cell of the
performing serving
in handover
concentric
cell. algorithm
cell
If theinparameter handover, isIIsetisorto
Missing penalties
triggered. Thisa neighboring
prevents cell
a the
call
hierarchical
HANDOVERNCELL(Handoverhandovers in
neighboring ADD G2GNCELL NCELLPUNLEV during
from PBGT,
experiencing concentric
ping-pong cell GBSC
case of Huawei
Neighboring Cell), handover
the
cells handover,
algorithm I or
handovers.
neighboring
hierarchical
orcell
duringis the better cell
handovers
handovers in
in the
the casecase cell of
of but
Missing handover neighboring
Huawei
Length
Huawei handover
of the
handover timer algorithm
for
algorithm III.or
neighboring ADD G2GNCELL NCELLPUNSTPTH not thebetter
IBCA neighboring GBSC
cells
during
performing cell
penalties in a cellin
handovers
of
thethecase
neighboringserving
of Huawei
cellcell. Ifhandover
during thePBGT,
Missing parameter
algorithm II.is set
concentric cell handover, or to
neighboring ADD G2GNCELL NCELLPUNTM IBCANCELL(IBCA
If the BCCH handovers
hierarchical receiveNeighboring
level of
in the GBSC
cells Cell), the
the neighboring
case neighboring
of Huawei handover cell is cell lower is
the IBCA neighboring
than this threshold,
algorithm I or duringthe betterbut
cell cell
Missing not the
Threshold handover
penalties will
handovers for
in be neighboring
triggering
case ofPBGT
thestopped.
neighboring ADD G2GNCELL NCELLTYPE cell
The
Huawei of the
triggering
handovers. serving
handoverPBGT cell.
of PBGThandovers
algorithm If the II. GBSC
cells parameter
handovers is set
must
to a neighboring cell can be to
meet the P/N
HANDOVERANDIBCANCELL(
criteria.
triggered Awhen
PBGTthe handover
following is
Missing Handoverwhen
neighboring ADD G2GNCELL PBGTLAST
triggered
condition isandmet: IBCA
P of N
GBSC
Neighboring
measurement
Path loss in the Cell),
reports the meet
serving cell the
-
cells neighboring cell is the
condition
Path loss for in thePBGT handovers.
neighboring
Missing handover
This
cell >parameter
Actual neighboring
value corresponds
of this cell and to
neighboring ADD G2GNCELL PBGTMARGIN IBCA
the P
parameter neighboring
in the
The triggering of PBGTP/N cell
criteria. of the GBSC
cells serving
If cell.must
this parameter
handovers IBCAmeet isneighboring
set the to aP/N
cells are
value
criteria. lessAsomethan neighboring
PBGT 64, calls can
handover is be
Missing cells of aoverserving
handed
triggered when back P cell
oftoNawith its
neighboring ADD G2GNCELL PBGTSTAT IBCA algorithm
neighboring cell enabled.
whosemeet There
path GBSC
measurement reports the
cells is
lossco-channel
is greater orthanadjacent-
that in the
condition for PBGT handovers.
Whether
channel
serving
This parameter the The
cell. currently
interference actual
corresponds used
between
valueto
Missing
handover
thethis
of
the IBCA
N algorithm
neighboring
inparameter
the in
is equal
P/N criteria. the toand
cells
neighboring ADD G2GNCELL SRCHOCTRLSWITCH GBSC
sourceGUIcell
the serving value is HO
cell. Algorithm
Handover
minus 64. I or
cells
HO Algorithmcells
neighboring II are candidate
Missing target cells of the serving cell
neighboring MOD G2GNCELL IDTYPE Type ofaan
during index.
handover. GBSC
cells
Missing A cell Index must be unique in
neighboring MOD G2GNCELL SRC2GNCELLID one BSC. It is used to uniquely GBSC
cells identify a cell.
Missing Uniform number of a cell index
neighboring MOD G2GNCELL NBR2GNCELLID within a BSC, which uniquely GBSC
cells identifies a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第57页，共633页

 HANDOVERNCELL(Handover
Neighboring Cell), the
neighboring cell is the
handover neighboring cell but
686970386.xls not the IBCA neighboring cell 文档密级
of the serving
Whether a cellcell. If the by
specified
parameter is set to
NBR2GNCELLID is an external
Missing IBCANCELL(IBCA Neighboring
or internal cell.
neighboring MOD G2GNCELL ISNCELL Cell), GBSC
This parameter appliescell
the neighboring onlyis to
cells the IBCA neighboring cell but
the BSC6910.
not the handover neighboring
Missing
cell of the serving cell. If the
neighboring MOD G2GNCELL NCELLTYPE GBSC
parameter is set to
cells
HANDOVERANDIBCANCELL(
Missing and Handover and IBCA
redundant Neighboring
RMV G2GNCELL IDTYPE Index type Cell), the GBSC
neighboring neighboring cell is the
cells handover neighboring cell and
Missing and
redundant IBCA
Mobileneighboring
country code cell(MCC)
of the of
RMV G2GNCELL SRCMCC serving cell. IBCA neighboring GBSC
neighboring the source cell
cells cells are some neighboring
Missing and cells of a serving cell with its
redundant Mobile network enabled.
IBCA algorithm code (MNC) Thereof
RMV G2GNCELL SRCMNC GBSC
neighboring the source cellor adjacent-
is co-channel
cells channel interference between
Missing and
redundant the
LocalIBCA
areaneighboring
code (LAC)cells of theand
RMV G2GNCELL SRCLAC the serving cell. Handover GBSC
neighboring source cell
cells neighboring cells are candidate
Missing and target cells of the serving cell
redundant during
RMV G2GNCELL SRCCI Sourceacellhandover.
ID GBSC
neighboring
cells
Missing and
redundant Mobile Country Code (MCC) of
RMV G2GNCELL NBRMCC GBSC
neighboring a neighboring cell
cells
Missing and
redundant Mobile Network Code (MNC) of
RMV G2GNCELL NBRMNC GBSC
neighboring a neighboring cell
cells
Missing and
redundant Local Area Code (LAC) of a
RMV G2GNCELL NBRLAC GBSC
neighboring neighboring cell
cells
Missing and
redundant
RMV G2GNCELL NBRCI Cell ID of a neighboring cell GBSC
neighboring
cells

08/24/2023 华为保密信息,未经授权禁止扩散 第58页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit

Use this command to add a GUI Value Range: 0 to 7

GBSS16.0 and later
2G external cell. Unit: None

GUI Value Range: 0 to

Use this command to add a
GBSS16.0 and later 1023
2G external cell.
Unit: None
GUI Value Range: 0 to
Use this command to add a
GBSS16.0 and later 65535
2G external cell.
Unit: None
GUI Value Range:
Use this command to add a BSC6900: 2048 to 12287;
GBSS16.0 and later
2G external cell. BSC6910: 0 to 19999
Unit: None
GUI Value Range: 1 to 64
Use this command to add a
GBSS16.0 and later characters
2G external cell.
Unit: None
Value Range: 0 to 127
Use this command to add a
GBSS16.0 and later Default Value: 68
2G external cell.
Unit: dB
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 63
2G external cell.
Unit: dB
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 25
2G external cell.
Unit: dB
Default Value:
Use this command to add a
GBSS16.0 and later YES(Support)
2G external cell.
Unit: None
Default Value:
Use this command to add a
GBSS16.0 and later YES(Support)
2G external cell.
Unit: None
Default Value: NO(Not
Use this command to add a
GBSS16.0 and later support)
2G external cell.
Unit: None
GUI Value Range: 1 to
Use this command to add a
GBSS16.0 and later 65533, 65535
2G external cell.
Unit: None
Value Range: 1, 2, 3, 4
Use this command to add a
GBSS16.0 and later Default Value: 3
2G external cell.
Unit: None
Value Range: 0 to 100
Use this command to add a
GBSS16.0 and later Default Value: 80
2G external cell.
Unit: None

Use this command to add a Default Value: NO(No)

GBSS16.0 and later
2G external cell. Unit: None

Use this command to add a GUI Value Range: 3 digits

GBSS16.0 and later
2G external cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第59页，共633页

 686970386.xls 文档密级

GUI Value Range: 2 to 3

Use this command to add a
GBSS16.0 and later digits
2G external cell.
Unit: None
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 10
2G external cell.
Unit: dB

Use this command to add a GUI Value Range: 0 to 7

GBSS16.0 and later
2G external cell. Unit: None

Use this command to add a Default Value: Prior-1

GBSS16.0 and later
2G external cell. Unit: None

Use this command to add a Value Range: 0 to 255

GBSS16.0 and later
2G external cell. Unit: None

Value Range: 0 to 255

Use this command to add a
GBSS16.0 and later Default Value: 40
2G external cell.
Unit: s
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 30
2G external cell.
Unit: dB
Value Range: 0 to 255
Use this command to add a
GBSS16.0 and later Default Value: 10
2G external cell.
Unit: s
Value Range: 0 to 127
Use this command to add a
GBSS16.0 and later Default Value: 69 Unit:
2G neighboring cell.
None
Default Value:
QUICK_HO_NCELL_TYP
Use this command to add a
GBSS16.0 and later E_A(QUICK_HO_NCELL
2G neighboring cell.
_TYPE_A)
Unit:None
Value Range: 0 to 128
Use this command to add a
GBSS16.0 and later Default Value: 72 Unit:
2G neighboring cell.
dB
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 4 Unit:
2G neighboring cell.
470ms; 480ms
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 6 Unit:
2G neighboring cell.
470ms; 480ms
Value Range: 0 to 127
Use this command to add a
GBSS16.0 and later Default Value: 64
2G neighboring cell.
Unit: None
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 3 Unit:
2G neighboring cell.
470ms; 480ms
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 4
2G neighboring cell.
Unit: 480ms
Value Range: 0 to 127
Use this command to add a
GBSS16.0 and later Default Value: 67 Unit:
2G neighboring cell.
None

08/24/2023 华为保密信息,未经授权禁止扩散 第60页，共633页

 686970386.xls 文档密级

Value Range: 0 to 127

Use this command to add a
GBSS16.0 and later Default Value: 68 Unit:
2G neighboring cell.
None
Value Range: NO, YES
Use this command to add a
GBSS16.0 and later Default Value: NO Unit:
2G neighboring cell.
None
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 6 Unit:
2G neighboring cell.
470ms; 480ms
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 8 Unit:
2G neighboring cell.
470ms; 480ms
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 0
2G neighboring cell.
Unit: dB
Value Range: NO, YES
Use this command to add a
GBSS16.0 and later Default Value: NO Unit:
2G neighboring cell.
None
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 10 Unit:
2G neighboring cell.
dB
Value Range: 0 to 63
Use this command to add a
GBSS16.0 and later Default Value: 20
2G neighboring cell.
Unit: dB

Use this command to add a Value Range: 0 to 255

GBSS16.0 and later
2G neighboring cell. Default Value: 10 Unit: s
Default Value:
Use this command to add a HANDOVERNCELL(Hand
GBSS16.0 and later
2G neighboring cell. over Neighboring Cell)
Unit: None
Value Range: 1 to 32
Use this command to add a
GBSS16.0 and later Default Value: 6 Unit:
2G neighboring cell.
480ms
Value Range: 0 to 127
Use this command to add a
GBSS16.0 and later Default Value: 68 Unit:
2G neighboring cell.
None
Value Range: 1 to 32
Use this command to add a Value Range:
GBSS16.0 and later Default Value: 8 Unit:
2G neighboring cell. HOALGORITHM1(Hando
480ms
ver algorithm I),
HOALGORITHM2(Hando
Use this command to add a
GBSS16.0 and later ver algorithm II)
2G neighboring cell.
Default Value:
HOALGORITHM1(Hando
Value Range:I)BYNAME,
ver algorithm
Modify the information
GBSS16.0 and later BYID
about 2G neighboring cells. Unit: None
Unit: None
GUI Value Range:
Modify the information BSC6900: 0 to 2047;
GBSS16.0 and later
about 2G neighboring cells. BSC6910: 0 to 7999
Unit: None
GUI Value Range:
Modify the information BSC6900: 0 to 12287;
GBSS16.0 and later
about 2G neighboring cells. BSC6910: 0 to 19999
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第61页，共633页

 686970386.xls 文档密级

Modify the information Value Range:

GBSS16.0 and later NA
about 2G neighboring cells. HANDOVERNCELL(Hand
over Neighboring Cell),
IBCANCELL(IBCA
Modify the information Neighboring Cell),
GBSS16.0 and later
about 2G neighboring cells. HANDOVERANDIBCANC
ELL(Handover and IBCA
Neighboring
Value Range:Cell),
BYNAME,
Remove the information NONE(None)
GBSS16.0 and later BYID
about 2G neighboring cells.
Unit: None

Remove the information GUI Value Range: 3 digits

GBSS16.0 and later
about 2G neighboring cells. Unit: None

GUI Value Range: 2 to 3

Remove the information
GBSS16.0 and later digits
about 2G neighboring cells.
Unit: None
GUI Value Range: 1 to
Remove the information
GBSS16.0 and later 65533, 65535
about 2G neighboring cells.
Unit: None
GUI Value Range: 0 to
Remove the information
GBSS16.0 and later 65535
about 2G neighboring cells.
Unit: None

Remove the information GUI Value Range: 3 digits

GBSS16.0 and later
about 2G neighboring cells. Unit: None

GUI Value Range: 2 to 3

Remove the information
GBSS16.0 and later digits
about 2G neighboring cells.
Unit: None
GUI Value Range: 1 to
Remove the information
GBSS16.0 and later 65533, 65535
about 2G neighboring cells.
Unit: None
GUI Value Range: 0 to
Remove the information
GBSS16.0 and later 65535
about 2G neighboring cells.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第62页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.for
parameters The MAEthe
which does
MAEnotprovides
optimize the
values of
built-in thesevalues
default parameters.
that are displayed on
the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters for which
these parameters based on the MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE
Fixed-value delivers includes
parameters: the fixed the
values of
these parameters
parameters based
for which the on
MAEtheprovides
objects that
are filtered
built-in according
default values to algorithm
that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithm default values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithm default values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such
algorithm requirements.as CellId, IDTYPE, MCC,
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.
parameters for The MAEthe
which does
MAEnotprovides
optimize the
values of
built-in thesevalues
default parameters.
that are displayed on
the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters for which
these parameters based on the MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE
Fixed-value delivers includes
parameters: the fixed the
values of
these parameters
parameters based
for which the on
MAEtheprovides
objects that
are filtered
built-in according
default values to algorithm
that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such
algorithm requirements.as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第63页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.for
parameters The MAEthe
which does
MAEnotprovides
optimize the
values of
built-in thesevalues
default parameters.
that are displayed on
the MAE client and can be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects that
include
are filtered according
parameters to algorithm
such as CellId, IDTYPE, MCC,
requirements.
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.for
parameters The MAEthe
which does
MAEnotprovides
optimize the
values of
built-in thesevalues
default parameters.
that are displayed on
the MAE client and can be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects that
include
are filtered according
parameters to algorithm
such as CellId, IDTYPE, MCC,
requirements.
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.for
parameters The MAEthe
which does
MAEnotprovides
optimize the
values of
built-in thesevalues
default parameters.
that are displayed on
the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE
Fixed-value delivers includes
parameters: the fixed the
values of
these parameters
parameters based
for which the on
MAEtheprovides
objects that
are filtered
built-in according
default values to algorithm
that cannot be
requirements.
modified by users. The
Fixed-value parameters: includeMAE delivers
the the
fixed values for
parameters of these
which parameters based on
the MAE provides
the objects
built-in thatvalues
default are filtered according
that are to on
displayed
algorithm
the requirements.
MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters for which
these parameters based on the MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE delivers the fixed values of
these parameters based on the objects that
are filtered according to algorithm
requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第64页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed on
the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters for which
these parameters based on the MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE
Fixed-value delivers includes
parameters: the fixed the
values of
these parameters
parameters based
for which the on
MAEtheprovides
objects that
are filtered
built-in according
default values to algorithm
that cannot be
requirements.
modified by users. The
Fixed-value parameters: includeMAE delivers
the the
fixed values for
parameters of these
which parameters based on
the MAE provides
the objects
built-in thatvalues
default are filtered according
that are to on
displayed
algorithm
the requirements.
MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters for which
these parameters based on the MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthe
values of
parameters
these parametersfor which the on
based MAEtheprovides
objects that
built-in default
are filtered values to
according that are displayed on
algorithm
the MAE client
requirements. and can be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects that
include
are filtered according
parameters to algorithm
such as CellId, IDTYPE, MCC,
requirements.
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第65页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters: include the

non-identity-related parameters that the
MAE does not optimize. The MAE obtains
the values of parameters:
Range-value these parameters
includefrom
theNEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
Identity-related
values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize the
values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第66页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description
Type
ID of the cell. The cell ID
Missing cannot conflict with other cell
neighboring ADD GEXT3GCELL EXT3GCELLID IDs in the BSC. The cells in
cells the BSC are numbered
sequentially.
Missing
neighboring ADD GEXT3GCELL EXT3GCELLNAME Name of the cell.
cells Mobile country code. This
parameter identifies the
Missing
country where a mobile
neighboring ADD GEXT3GCELL MCC
subscriber is located, for
cells
example,
Mobile the Chinese
network MCC
code. This
Missing is 460.
parameter identifies the
neighboring ADD GEXT3GCELL MNC public land
Location areamobile
codenetwork
(LAC).
cells (PLMN)
MS to which
can freely a mobile
move in the
subscriber
local location belongs.
area with no
Missing
need of location update.
neighboring ADD GEXT3GCELL LAC Identity codelocal
of a cell, A cell
Reasonable allocation
cells is a wireless coverage area
can effectively lighten the
identified by a base
signaling load and improve station
Missing
identity code and a rate.
the call completion global
neighboring ADD GEXT3GCELL CI
cell identification. Can be
cells
input ID
RNC in hexadecimal
of a 3G external format.
cell.
Missing hexadecimal
The value format is
of this parameter
neighboring ADD GEXT3GCELL RNCID H'****,be
must forconsistent
example, with
H'1214.
the
cells data configuration at the
RNC.
Missing
Downlink frequency of the
neighboring ADD GEXT3GCELL DF
external 3G cell
When UTRANCELLTYPE is
cells
set to FDD(FDD), this
Missing parameter specifies the
neighboring ADD GEXT3GCELL SCRAMBLE scrambling code. When
cells UTRANCELLTYPE is set to
TDD(TDD), this parameter
Missing Whether
specifies to theactivate transmit
cell parameter.
neighboring ADD GEXT3GCELL DIVERSITY diversity on the common
cells channel of a 3G cell
This parameter specifies the
Missing type of a 3G cell. A cell type
neighboring ADD GEXT3GCELL UTRANCELLTYPE can be Frequency Division
cells Duplex (FDD) or Time
Division Duplex (TDD).
Missing Name of the operator. This
neighboring ADD GEXT3GCELL OPNAME parameter uniquely identifies
cells an operator.
Routing area code for a
Missing
neighboring cell. A routing
neighboring ADD GEXT3GCELL RA
area is used for the SGSN to
cells
manage the location of MSs.
Missing
neighboring ADD G3GNCELL IDTYPE Type of an index.
cells
A source cell index must be
Missing
unique in one BSC. It is
neighboring ADD G3GNCELL SRC3GNCELLID
used to uniquely identify a
cells
source cell.
Uniform number of a
Missing
neighboring cell index within
neighboring ADD G3GNCELL NBR3GNCELLID
a BSC, which uniquely
cells
identifies a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第67页，共633页

 686970386.xls Offset in the RSCP of a 3G 文档密级
neighboring cell. The RSCP
reported by the MS minus
Missing the value of this parameter is
neighboring ADD G3GNCELL RSCPOFF used as the level in the K
cells Offset
criteriainforthe Ec/No of a 3G
handover
neighboring
Period cell.
decisions. Thewhich
during As ais used
level
Missing performance
for handovers from 2Gfor
handovers to counter
a better 3G cell
neighboring ADD G3GNCELL ECNOOFF FDD
are cells,
measured Ec/Noif
networks to 3G networks. indicates
neighboring
cells the cells
3G ratioduring
Period of
aretheFDD energy
which theper
cells.
received chip
According
conditions to to
forthe the
P/Nspectral
handovers rule,to a
Missing noise power
handovers
better 3G cell todensity.
aarebetter
met 3Gif cell
neighboring ADD G3GNCELL HOSTAT3G
can be triggered
neighboring when
3G cells the
are
cells
conditions
FDD cells. for handovers
According to a
to the
Missing better
P/N 3Ghandovers
rule, cell are mettofor a P
neighboring ADD G3GNCELL HODURT3G out of N
better 3GMRs. Thisbe
cell can
cells parameterwhen
triggered
Common specifies
priority the N in the
of the
P/N rule. for3G
conditions
neighboring handovers
cell. Value to0a
Missing better 3G thecelllowest
are met for P
indicates priority,
neighboring ADD G3GNCELL NCELLPRI out of N MRs. This the
and value 7 indicates
cells parameter specifies P 255
in the
highest priority. Value is
Missing and P/N rule.
invalid.
redundant
RMV G3GNCELL IDTYPE Type of an index.
neighboring
cells
Missing and A source cell index must be
redundant unique in one BSC. It is
RMV G3GNCELL SRC3GNCELLID
neighboring used to uniquely identify a
cells source cell.
Missing and Uniform number of a
redundant neighboring cell index within
RMV G3GNCELL NBR3GNCELLID
neighboring a BSC, which uniquely
cells identifies a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第68页，共633页

 686970386.xls 文档密级

MAE Value Range and

NE Version Operation Description
Unit
GUI Value Range:
Use this command to add BSC6900: 5048 to 15287;
GBSC GBSS16.0 and later
a 3G external cell. BSC6910: 0 to 19999
Unit: None
GUI Value Range: 1 to 64
Use this command to add
GBSC GBSS16.0 and later characters
a 3G external cell.
Unit: None

Use this command to add GUI Value Range: 3 digits

GBSC GBSS16.0 and later
a 3G external cell. Unit: None

GUI Value Range: 2 to 3

Use this command to add
GBSC GBSS16.0 and later digits
a 3G external cell.
Unit: None
GUI Value Range: 1 to
Use this command to add
GBSC GBSS16.0 and later 65533, 65535
a 3G external cell.
Unit: None
GUI Value Range: 0 to
Use this command to add
GBSC GBSS16.0 and later 65535
a 3G external cell.
Unit: None
GUI Value Range: -115 to
Use this command to add
GBSC GBSS16.0 and later -25
a 3G external cell.
Unit: None
GUI Value Range: 0 to
Use this command to add
GBSC GBSS16.0 and later 16383
a 3G external cell.
Unit: None

Use this command to add ValueRange: 0 to 511

GBSC GBSS16.0 and later
a 3G external cell. Unit: None

Value Range: NO(No),

Use this command to add
GBSC GBSS16.0 and later YES(Yes)
a 3G external cell.
Unit: None

Use this command to add

GBSC GBSS16.0 and later NA
a 3G external cell.

GUI Value Range: 0 to

Use this command to add
GBSC GBSS16.0 and later 2047
a 3G external cell.
Unit: None
GUI Value Range: 1 to 64
Use this command to add
GBSC GBSS16.0 and later characters
a 3G external cell.
Unit: None
Use this command to add
a 3G neighboring cell. The GUI Value Range: 5048 to
GBSC GBSS16.0 and later source cell is a 2G internal 8047
cell and the neighboring Unit: None
Use
cell isthis command
a 3G externaltocell.
add
a 3G neighboring cell. The GUI Value Range: 1 to 64
GBSC GBSS16.0 and later source cell is a 2G internal characters
cell and the neighboring Unit: None
Use
cell isthis command
a 3G externaltocell.
add
a 3G neighboring cell. The
GUI Value Range: 0 to 49
GBSC GBSS16.0 and later source cell is a 2G internal
Unit: None
cell and the neighboring
cell is a 3G external cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第69页，共633页

 686970386.xls 文档密级

Use this command to add

a 3G neighboring cell. The GUI Value Range: 1 to 32
GBSC GBSS16.0 and later source cell is a 2G internal Default Value: 3
cell and the neighboring Unit: None
Use
cell isthis command
a 3G externaltocell.
add
a 3G neighboring cell. The GUI Value Range: 0 to 49
GBSC GBSS16.0 and later source cell is a 2G internal Default Value: 3
cell and the neighboring Unit: None
Use
cell isthis command
a 3G externaltocell.
add
a 3G neighboring cell. The GUI Value Range: 1 to 32
GBSC GBSS16.0 and later source cell is a 2G internal Default Value: 10
cell and the neighboring Unit: 480ms
Use
cell isthis command
a 3G externaltocell.
add GUI Value Range:
a 3G neighboring cell. The BSC6900: 0 to 2047;
GBSC GBSS16.0 and later source cell is a 2G internal BSC6910: 0 to 7999
cell and the neighboring Default Value: 8
Use
cell isthis command
a 3G externaltocell.
add Unit:Value
None Range:
GUI
a 3G neighboring cell. The
BSC6900: 5048 to 15287;
GBSC GBSS16.0 and later source cell is a 2G internal
BSC6910: 0 to 19999
cell and the neighboring
Unit: None
cell is a 3G external cell.
Remove the information GUI Value Range:
GBSC GBSS16.0 and later about 3G neighboring BYNAME, BYID
cells. Unit: None
GUI Value Range:
Remove the information
BSC6900: 0 to 2047
GBSC GBSS16.0 and later about 3G neighboring
BSC6910: 0 to 7999
cells.
Unit: None
GUI Value Range:
Remove the information
BSC6900: 5048 to 15287
GBSC GBSS16.0 and later about 3G neighboring
BSC6910: 0 to 19999
cells.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第70页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as
CellId, IDTYPE, MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the parameters for which
optimize the values of these the
MAE calculates optimization
parameters.
values according to algorithm
requirements and theparameters:
Non-MAE-optimized value range
of each the
include parameter on the MAE
non-identity-related
client or on NEs.
parameters that the MAE does
not optimize.
Identity-relatedThe MAE obtains
parameters:
the values
include of these parameters
parameters such as
from NEs.
CellId, IDTYPE, MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第71页，共633页

Fixed-value parameters: include 686970386.xls 文档密级
the parameters for which the
MAE provides built-in default
values that are displayed on the
Fixed-value
MAE client and parameters: include
can be modified
the parameters for which
by users. The MAE delivers thethe
MAE provides built-in default
fixed values of these parameters
values
based on thatthe
areobjects
displayed on
arethe
thatinclude
Fixed-value
MAE client parameters:
and can be modified
filtered
the according
parameters fortowhich
algorithm
thethe
by users. The MAE
requirements. delivers
MAE provides built-in default
fixed values of these parameters
values
based on thatthe
areobjects
displayed on
arethe
thatinclude
Fixed-value
MAE client parameters:
and can be modified
filtered
the according
parameters fortowhich
algorithm
thethe
by users. The MAE
requirements. delivers
MAE provides built-in default
fixed values of these parameters
values
based on thatthe
areobjects
displayed
that on
arethe
MAE client and can be modified
filtered according to algorithm
by users. The MAE
Identity-related
requirements. delivers the
parameters:
fixed values
include of thesesuch
parameters parameters
as
based on
CellId, the objects
IDTYPE, MCC,that andare
the
filteredprimary
MOC according
key to algorithm
and foreign key
Identity-related
requirements.Theparameters:
parameters. MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第72页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type
ID of the cell. The cell ID
cannot conflict with other
Missing
ADD GEXTLTECELL EXTLTECELLID cell IDs in the BSC. The GBSC
neighboring cells
cells in the BSC are
numbered sequentially.

Missing
ADD GEXTLTECELL EXTLTECELLNAME Name of the cell. GBSC
neighboring cells
Mobile country code. This
parameter identifies the
Missing country where a mobile
ADD GEXTLTECELL MCC GBSC
neighboring cells subscriber is located, for
example, the Chinese MCC
Mobile
is 460. network code. This
parameter identifies the
Missing
ADD GEXTLTECELL MNC public land mobile network GBSC
neighboring cells
(PLMN) where
Cell identity (CI)a used
mobile
to
subscriber is homed.
uniquely identify an LTE cell
in the PLMN. For macro
Missing The type of eNodeB which
ADD GEXTLTECELL ENODEBTYPE base stations, Eutran CellId GBSC
neighboring cells the LTE cell belongs to.
consists of a 20-bit
eNodeBID and an 8-bit
CellID (EutranCellId =
Missing eNodeBID x 256 + CellID).
ADD GEXTLTECELL CI GBSC
neighboring cells For micro base stations,
Track area code (TAC). MSs
EutranCellId is a 28-bit
can freely move in the local
eNodeBID. You can enter a
track area without track area
CI in the hexadecimal format
Missing update. Reasonable division
ADD GEXTLTECELL TAC of H'****, such as H'1214. GBSC
neighboring cells of track areas can effectively
For details about the
mitigate the signaling load
parameter
E-UTRAN description,
Absolute see
and increase the callRadio
3GPP TS 25.413.
Frequency Channel Number
completion rate.
Missing
ADD GEXTLTECELL FREQ (EARFCN) of the carrier GBSC
neighboring cells
frequency that an external
LTE cell uses.

Missing Physical cell identifier of an

ADD GEXTLTECELL PCID GBSC
neighboring cells external LTE cell.

Type of an external LTE cell.

A cell type can be
Missing
ADD GEXTLTECELL EUTRANTYPE Frequency Division Duplex GBSC
neighboring cells
(FDD) or Time Division
Duplex (TDD).
Name of the operator. This
Missing
ADD GEXTLTECELL OPNAME parameter uniquely GBSC
neighboring cells
identifies an operator.

Missing
ADD GLTENCELL IDTYPE Type of an index. GBSC
neighboring cells
Index of the source GSM
cell, which is a neighboring
Missing cell of an LTE cell. The
ADD GLTENCELL SRCLTENCELLID GBSC
neighboring cells index must be unique in a
BSC. It is used to uniquely
identify a source cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第73页，共633页

 686970386.xls 文档密级

Missing
ADD GLTENCELL SRCLTENCELLNAME Name of a source cell. GBSC
neighboring cells
Index of the target LTE cell,
Whether
which is atoneighboring
support cellcell
Missing reselection
of a GSM cell. from The GSM to
index
ADD GLTENCELL NBRLTENCELLID LTE. GBSC
neighboring cells must If bethis parameter
unique in a BSC. is set
It
to SUPPORT,
is used it indicates
to uniquely identify
that
an LTEthe cell.
frequency of the
target LTE cell is a
Missing Name of a neighboring LTE
ADD GLTENCELL NBRLTENCELLNAME neighboring frequency of the GBSC
neighboring cells cell of the GSM cell.
source GSM cell and cell
reselection from GSM to
LTE is supported. If this
Missing parameter is set to
ADD GLTENCELL SPTRESEL Whether to support the blind GBSC
neighboring cells UNSUPPORT, it indicates
handover from the source
that the frequency of the
GSM cell to the target LTE
Whether
target LTE a quick
cell is reselection
a
cell. The blind handover
from the source
neighboring GSM cell
frequency to
of the
Missing from the source GSM cell to
ADD GLTENCELL SPTBLINDHO the target
source GSM LTE cell
cell is the
but GBSC
neighboring cells the target LTE cell indicates
allowed.
LTE cell is Quick reselection
a barred
that the MS in the GSM cell
from the source
neighboring cell GSM
of thecellGSM to
is handed over to the target
the
cell.target
That is, LTEcellcell indicates
reselection
LTE cell without measuring
Missing that
fromthetheCHANNEL
source GSM cell to
ADD GLTENCELL SPTRAPIDSEL the target LTE cell. GBSC
neighboring cells RELEASE
the target LTE message
cell is sent
not to
the MS carries the
supported.
Common priority of the
information about cell
neighboring LTE cell. Value
reselection, and the MS
Missing 0 indicates the lowest
ADD GLTENCELL NCELLPRI performs cell reselection GBSC
neighboring cells priority, and value 7
immediately after channel
indicates the highest priority.
release.
Value 255 is invalid.
Missing and
redundant RMV GLTENCELL IDTYPE Type of an index GBSC
neighboring cells
Index of the source GSM
cell, which is a neighboring
Missing and
cell of an LTE cell. The
redundant RMV GLTENCELL SRCLTENCELLID GBSC
index must be unique in a
neighboring cells
BSC. It is used to uniquely
Index of the target LTE cell,
identify a source cell.
which is a neighboring cell
Missing and
of a GSM cell. This index
redundant RMV GLTENCELL NBRLTENCELLID GBSC
must be unique in a BSC. It
neighboring cells
is used to uniquely identify
an LTE cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第74页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

GUI Value Range: 8048 to

Use this command to add an
GBSS16.0 and later 18287
external LTE cell.
Unit: None

GUI Value Range: 1 to 64

Use this command to add an
GBSS16.0 and later characters
external LTE cell.
Unit: None

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.

Use this command to add an

GBSS16.0 and later NA
external LTE cell.
Use this command to add the
neighboring relationship
between a GSM cell and an
GBSS16.0 and later LTE cell. In this case, the NA
GSM cell is the source cell,
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an
GUI Value Range: 0 to 2047
GBSS16.0 and later LTE cell. In this case, the
Unit: None
GSM cell is the source cell,
whereas the LTE cell is a
neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第75页，共633页

 686970386.xls 文档密级
Use this command to add the
neighboring relationship
between a GSM cell and an GUI Value Range: 1 to 64
GBSS16.0 and later LTE cell. In this case, the characters
GSM cell is the source cell, Unit: None
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an GUI Value Range: 8048 to
GBSS16.0 and later LTE cell. In this case, the 18287
GSM cell is the source cell, Unit: None
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an GUI Value Range: 1 to 64
GBSS16.0 and later LTE cell. In this case, the characters
GSM cell is the source cell, Unit: None
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an
GBSS16.0 and later LTE cell. In this case, the NA
GSM cell is the source cell,
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an
GBSS16.0 and later LTE cell. In this case, the NA
GSM cell is the source cell,
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an
GBSS16.0 and later LTE cell. In this case, the NA
GSM cell is the source cell,
Use this command to add the
whereas the LTE cell is a
neighboring relationship
neighboring cell.
between a GSM cell and an
GBSS16.0 and later LTE cell. In this case, the NA
GSM cell is the source cell,
Use this command to delete
whereas the LTE cell is a
the neighboring relationship
neighboring cell.
between a GSM cell and an GUI Value Range: BYNAME,
GBSS16.0 and later LTE cell. In this case, the BYID
GSM cell is the source cell, Unit: None
Use this command to delete
whereas the LTE cell is a
the neighboring relationship
neighboring cell.
between a GSM cell and an
GUI Value Range: 0 to 2047
GBSS16.0 and later LTE cell. In this case, the
Unit: None
GSM cell is the source cell,
Use this command to delete
whereas the LTE cell is a
the neighboring relationship
neighboring cell.
between a GSM cell and an GUI Value Range: 8048 to
GBSS16.0 and later LTE cell. In this case, the 18287
GSM cell is the source cell, Unit: None
whereas the LTE cell is a
neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第76页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Identity-related parameters: include
parameters.
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Non-MAE-optimized parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Identity-related parameters:
of these parameters from NEs.include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第77页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Identity-related parameters: include
parameters.
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Identity-related parameters: include
parameters.
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Non-MAE-optimized parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.
Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Identity-related parameters:
of these parameters from NEs.include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Identity-related parameters: include
parameters.
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
Identity-related parameters: include
parameters.
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第78页，共633页

 686970386.xls 文档密级

Parameter
Optimization Type MML Command Parameter NE
Description

Missing ADD Unique ID of a

GSMCellIndex RNC
neighboring cells UEXT2GCELL GSM cell

A name identifying
Missing ADD
GSMCellName a GSM cell RNC
neighboring cells UEXT2GCELL
uniquely.
The Index
When of
the switch is
Missing ADD neighboring
turned on, BSC
periodic
NBscIndex RNC
neighboring cells UEXT2GCELL that
query the
andGSM cell
reporting
belongs
of load on to.a 2G cell
is enabled.
Missing ADD
LdPrdRprtSwitch RNC
neighboring cells UEXT2GCELL Mobile country
When the switch is
code.
turnedThis off, periodic
parameter
query and reporting
Missing ADD
MCC identifies
Mobile onthe
of load network a 2G cell RNC
neighboring cells UEXT2GCELL
country
code. where
This
is disabled. a
mobile subscriber
parameter
Missing ADD is located.the public
identifies
MNC RNC
neighboring cells UEXT2GCELL land mobile
network
Index of (PLMN)
an Cn to
which a mobile
Operator Group
Missing ADD subscriber belongs.
CnOpGrpIndex whose users can RNC
neighboring cells UEXT2GCELL
be handed over to
the GSM cell.
Location Area
Missing ADD
LAC Codeparameter
This (LAC) of the RNC
neighboring cells UEXT2GCELL
GSM cell.whether
identifies
to configure RAC.
Missing ADD If the RNC
Routing area code. RNC
CfgRacInd
neighboring cells UEXT2GCELL supports
This parameter the PS
domain,athis
defines routing
parameter
area withinmusta be
Missing ADD set to REQUIRE.
RAC location area for RNC
neighboring cells UEXT2GCELL
the PLMN of GSM-
MAP type. RAC is
Missing ADD defined
Identifying by athe GSM
CID operator. RNC
neighboring cells UEXT2GCELL cell.
Uniquely identifying
the different
Missing ADD
NCC network in the RNC
neighboring cells UEXT2GCELL
neighboring area.
Uniquely identifying
a neighboring base
Missing ADD
BCC station with the RNC
neighboring cells UEXT2GCELL
same carrier.
Identifying
When BCCH
the inter-
Missing ADD frequency
RAT cell
Identifying number
frequency
the type RNC
BcchArfcn
neighboring cells UEXT2GCELL of the inter-RAT
number is within
cell.range 512-810,
the
cell
the parameter
NO_CAPABILITY
Missing ADD
BandInd indicates that whetherthe RNC
neighboring cells UEXT2GCELL
this frequency
capacity of the
number
GSM cellbelongs remainsto
Missing ADD the DSC1800
unknown. It is or
not
RatCellType PCS1900 RNC
neighboring cells UEXT2GCELL recommended to
frequency
set the cellband.
type to
NO_CAPABILITY.
If the cell type is
NO_CAPABILITY,
08/24/2023 华为保密信息,未经授权禁止扩散 the inter-RAT 第79页，共633页
handover cannot
be triggered.
 Whether a cell
686970386.xls
uses HCS. 文档密级

In
HCS a HCS priority network,
of the
macro
cell cells provide
belongs to. Set
Missing ADD
UseOfHcs continuous
a high HCS priority RNC
neighboring cells UEXT2GCELL
coverage
for a cell ifand the cell
micro cellsisprovide
coverage small.
Missing ADD hotspot
The value coverage.
0
HCSPrio RNC
neighboring cells UEXT2GCELL indicates the
Offset
lowest between
HCS priority the
Quality
neighboring
and threshold
7 indicates GSM the
Missing ADD Identifying
for
cell HCS
and HCS WCDMA whether
Qhcs highest
Indicating
an inter-RAT cell the RNC
neighboring cells UEXT2GCELL reselection.
cell.
priority. control
network
supports a whether
Identifying
mode. Forindetails
handover
This
the specifies
inter-RAT the the
cellPS
Missing ADD about
domain this(PS HO).
NcMode offset
supports of the RIM. RNC
neighboring cells UEXT2GCELL parameter,
PS HO indicates see(RIM
measurement
is used to obtain
3GPP
an TS 45.008
inter-RAT
value
the of the
SI/PSI
protocol.
handover
Missing ADD informationwith
neighboring GSM
of the
SuppRIMFlag relocation in theFor PS RNC
neighboring cells UEXT2GCELL cell signal cell.)
inter-RAT quality.
domain.
This When
parameter
the details of RIM the
is
parameter
used
process, for RSSI is set
refer to to
Missing ADD TRUE,
measurement.
the 3GPP it indicates
TS The
SuppPSHOFlag RNC
neighboring cells UEXT2GCELL that
offset the inter-RAT
25.901isprotocol.
subtracted
cell
fromisthe able to
perform
It is set
neighboring an inter-
according cell
Missing ADD RAT
neighboring cells UEXT2GCELL
CIO measurement with
to the handover
topographic RNC
relocation
feature.
value before in the
cell PS
domain.
reselection. When the
Missing parameter
Cell is set to
ADD U2GNCELL RNCId ID ofindividual
FALSE, an itRNC indicates RNC
neighboring cells offset
In cell for the
reselection GSM
Uniquely
that identifying
the inter-RAT
cell.
algorithm,
a WCDMA this
cell,
cell is unable
parameter to to
is used do
Missing which neighboring
so.
ADD U2GNCELL CellId This
for parameter
moving the be is RNC
neighboring cells GSM cells can
used
border
Minimum
added. forofdecision
a
RX cell.
level
making
Content:
of for
Unique ID ofcell.
the GSM the
During a
Missing inter-RAT
cell
For selection
details or
ADD U2GNCELL GSMCellIndex GSM cell about RNC
neighboring cells handover.
resection,
this parameter, A larger
the see
value
larger of
3GPP TSthe
the value of
25.331.
parameter
the parameter, the
Missing
ADD U2GNCELL CIOOffset indicates
smaller
Before the
the theUEhigher RNC
neighboring cells
the handover
probability
camps on the of cell,
priority
selecting
take theof inter-RAT
the GSM
Missing cell. A smaller
neighboring
measurement the
cells.
of
ADD U2GNCELL Qoffset1sn value of the RNC
neighboring cells The smaller
the signal quality in the
Penalty
parameter
value
the cell.of time
Ifthe thefor
hierarchical
indicates
parameter,
quality thethe
is better cell
lower
Missing reselection
Whether
the handover
larger to
the used for after
perform a
ADD U2GNCELL Qrxlevmin than
Cell this
offset RNC
neighboring cells UE
blind reselects
priority handover.
probability of the
of aGSM
parameter,
CPICH
Priority RSCP
of the this
hierarchical
cell.
selecting
indicates inter-RAT that cell.
thefor
measurement
neighboring
hierarchical cell
Missing The
TpenaltyHcsResele cell
value value
neighboring
can in obtainFALSE
cells.
ADD U2GNCELL a blind
cell handover.
neighboring cells ct Thisreselection
indicates
better parameter
hierarchicalQoS that and the
cell can
the RNC
function
cell
be
UE is not
configured
is enables
allowed by
to a
selection
The
UE invalue
idle or0as a to
mode
considered
the network
camp on this
Missing
reselection.
represents
reselect
candidate a cell thecell.
ADD U2GNCELL TempOffset1 planner
Otherwise,
highest priority thefor
according UE
and RNC
neighboring cells hierarchical
blind
to
cannot handover.
reality. obtain cellgoodin
If
the
thethis
valueparameter
network. 30 is
Therefore,
QoS
set toinINFINITY,
this the blind
cell and a
represents
handovers to this
Missing For
does details,
not
neighboring
lowest camp
priority. see
cell on is
ADD U2GNCELL BlindHoFlag cell
3GPP cannot
the selected
not TS
cell. 0 toas be
25.331. the RNC
neighboring cells Priorities 15
triggered.
target cell.Theto
are
value assigned
TRUE
As for
concentric the impact
Missing indicates
on network that the
ADD U2GNCELL BlindHOPrio neighboring
cell is considered cells, RNC
neighboring cells performance:
which ensures
as a candidate cell
successful
for blind blind
handover
The larger
handovers. the
and
value blind
of the over to
Priorities
this cell can16 be to 30
parameter,
are assigned theto the
triggered.
lower the cells
08/24/2023 华为保密信息,未经授权禁止扩散 neighboring 第80页，共633页
probability
which allowofblind
selecting
handovers but
neighboring
cannot ensure cells.
The smaller the
 algorithm
conditionsofare met:
DRD
neighboringEc/No cell
threshold
combination, for the
UseOfHcstofor
Whether send the
determining
cell
Prioritywithof an invalid
serving
system
686970386.xls cell
information is set 文档密级
whether
priority tothe perform
neighboring
to
blockUSED
the blind 11is(SIB11)
by cells.
handover.
last
one
running
includingto be thetheADD
The DRD
considered the is as
When
UCELLHCS
neighboring
permitted ifa sendcellthe
algorithm
Ec/No
Missing Whether
measurement
of neighboring
Priority
DRDEcN0Threshh command.
information. of to MBDR cell
ADD U2GNCELL of
SIB12the current
object.
combination
cell. carrying iscell theis RNC
neighboring cells old
greater
neighboring
enabled, than the the
cell
total
UseOfHcs
The
Whether value forcell
FALSE the
DRD
The
number
This
indicates
Ec/No
information.
value
parameter
neighboring ofthe
thatTRUE GSMthe is
Missing supports
threshold
indicates
neighboring the
of
that a inter-
the
cells to
ADD U2GNCELL SIB11Ind valid
cell isonly
neighboring set
measure-based when
to USED the RNC
neighboring cells RAT/inter-
The
all value
neighboring
cells
MBDRFlag in FALSE
the cell
by running
information
directed the
is not
frequency
indicates
priority
active
parameter
ADD
included isretry
set that
in mayisSIB11.theto
set
(MBDR)
neighboring
configured.
exceed algorithm. cell.
Missing TRUE.
UEXT2GCELL
The value It32 if more
indicates
TRUE
ADD U2GNCELL SIB12Ind information
than
the one link
tiptop
command.
indicates isexists
priority
that not
the RNC
neighboring cells The value TRUE
included
When
in
when the
neighboring the
active
the that invalue SIB12.
algorithm
set. is
indicates
of
The value
neighboring
RNC TRUE
considers the
cell
set to 0,
AdjsQhcsSwitch
information
cell supports and is the for
Missing indicates
combination
this
lowest
the parameter
serving
included that
priority
in cellthe
SIB11. as
is
ADD U2GNCELL NPrioFlag MBDR
neighboring and the RNC
neighboring cells (controlled
onetoofthe
when
set ONconditions by is
value
by
value
information FALSE
HO_MC_NCELL_C
for selecting isthe
set
runningto 15.
indicates the The
that ADD the
included
OMBINE_SWITCH
neighboring
higher
UCELLHCS thenot in SIB12.
cells.
priority,
Missing cell does
)command.
is enabled,
ADD U2GNCELL NPrio That
the is, a itIfisthe
easier thefor RNC
neighboring cells support
total number MBDR. of
neighboring
the MBDR
Whether
first two conditionsa cell cell to
neighboring
withdelivered
be a high cells
priority
as to
neighboring
are
With
all
is
metMBDR,
cells in
preferentially
but
the thethe
Missing measurement
GERAN
AdjsQhcsSwitch
ADD U2GNCELL MBDRFlag RNC selects
Overlapping
active
selected. set Ifmay a for
acell RNC
neighboring cells object
(GSM/EDGE)
the and
serving the cell
is
qualified
coverage
exceed
neighboring 32be flag.
ifby more
cell If is
easier
supports
set to
neighboring to
OFF Single cell
this
than
not parameter
selected
Radio
running one
configured
Voice link
to
the theCall
ADD isto
exists
with
Missing set
set
in up
to
the RAB
TRUE,
active
the prioritytarget flag,the
forone
set. the
ADD U2GNCELL MBDRPrio handover
Continuity
UCELLHCS
UE, based on the RNC
neighboring cells neighboring
The
lowest RNC priority GSM
considers isare
cell when
(SRVCC).
command,
traffic loadtoof there
This
the the
cell
this
many covers
parameter
assigned
parameter
value ofcell cells
Qhcs the
and this as
meet
in
current
same
one
cell. of area
conditions ofand a the
Missing the quality
SuppPSHOFlag
ADD
inter-frequency of
ADD U2GNCELL SRVCCSwitch Whether
UMTS
for cell.
selecting
condition. to If this
the RNC
neighboring cells the ADDof thecells
UEXT2GCELL
Priority
neighboring
configure
valuethe
parameter
neighboring
The
Attention, iscells.
of
when set to
this
UEXT2GCELL
command
neighboring is cell
and
priority
FALSE,
That
Source the
parameter
there is,
doesflag
a
of multipleis for a as
command
delivered
a target
measurement cellinnot SIB11
for a
Missing neighboring cell.
GSM
cellthe
ADD U2GNCELL InterRatAdjsQhcs neighboring
inversely
have
determine
and
results cell
SIB12.
handover. on meetValue cells.
whether
channel 0 RNC
neighboring cells cells
with
When acover
proportional
quality
the high
this
condition
neighboring the
priority
to the
indicates
quality
The
same value
area the
of FALSE of inter-
a to
is
basepreferentially
parameter
neighboring
GERAN
The on
quality theis
cell set
cell
MBDR
level
highest
frequency
indicates
UMTS priority
cell. that This the and
Missing selected.
USER,
priority.
measurement
processes
criterion If
neighboring
H is a
ancells.IMS
ADD U2GNCELL NIRATOverLap value
neighboring
parameter 7 indicates must cell
neighboring cells neighboring
cells
result,
VOIP are
calculated
the lowest configured
if there
service using by be
cell
priority.
is RNC
priority
set
not
by
exists is
according
configured
users. a not
When
cell which towith
using
the
When SRVCC.
following
this
configured.
network
the
this
has priority
parameter
the priorityplan. In the
flag, is
ofthe
formula:
parameter takes
Missing algorithm
lowest
set
0, to
and priority
SONOPTI,
the of type isof
ADD U2GNCELL HOPrio effect,
neighboring
When athe UMTS RNC cell cell RNC
neighboring cells assigned
neighboring
the measurement
H(quality to this
level) cells =
preferentially
combination,
is shut down the
for
cell.
are
reportconfigured
is
Qmeas(measured periodic, by
selects
cell with
Priority
saving the
of
poweranbe cell
invalid with
the
thenSON
quality)
the it can
highest - feature priority
Missing priority
neighboring
consumption, is the last
cells.
the
ADD U2GNCELL U2GNcellSRC based
selected ontothe
InterRatAdjsQhcs
as the blind RNC
neighboring cells one to target
neighboring
optimization
handover be target cell. If
GSM
or Qhcs
two or themore cells
considered
When
cell
cell. whose
results. When as
algorithm the
this
have
of the
measurement
neighboring same value cell is
Neighboring cell parameter
ID
For ofdetails
priority, an the RNC is
about
RNCset to
MOD U2GNCELL RNCId object.
combination
TRUE
SONMEAS, provides is cell RNC
priority the formula,
selects a the target seecell
Uniquely
enabled,
coverage.
neighboring identifyingtotal
cells
3GPP
with
a WCDMAthe TS best 25.304. signal
The
number
are configured to
quality.
value of cell,
TRUE
Neighboring cell which
indicates
neighboring
during neighboring
the thatcells the to
MOD U2GNCELL CellId The unit of can this be RNC
priority GSM
all cellscells
neighboring
optimization in the cell
parameter
added. is the
of
priority
active
SON is maywhich
set
feature,
decibel
Unique ifID of a
Neighboring cell configured.
exceed
helps 32 if more
detect
MOD U2GNCELL GSMCellIndex QualMeas
GSM cell in the RNC
priority than
missing one link exists
ADD
When
in the algorithm
the active
neighboring set.
cells.
UCELLSELRESEL
of neighboring
The RNC considers cell
command is set to
Neighboring cell combination
this parameter as
MOD U2GNCELL NPrioFlag CPICH_ECNO and RNC
priority (controlled
one of conditions by
is dBm if QualMeas
HO_MC_NCELL_C
for selecting the
in the ADD
OMBINE_SWITCH
neighboring cells.
Neighboring cell UCELLSELRESEL
MOD U2GNCELL NPrio ) is enabled,
That is, a the RNC
priority command is set to
total numbercell
neighboring of
CPICH_RSCP.
neighboring
with a high priority cells to
allpreferentially
is cells in the
If UseOfHcs for the
active set Ifmay
selected. a
serving cell by
exceed 32 if cell
neighboring more is
running the ADD
08/24/2023 华为保密信息,未经授权禁止扩散 than one link exists
not configured with 第81页，共633页
UCELLHCS
in the
the activeflag,
priority set.the
command or
The RNC
lowest priority considers is
UseOfHcs for the
this parameter
assigned to thisas
neighboring GSM
 686970386.xls 文档密级

Missing
neighboring cells /
RMV U2GNCELL RNCId ID of an RNC RNC
Redundant
neighboring cells Uniquely identifying
Missing
a WCDMA cell, to
neighboring cells /
RMV U2GNCELL CellId which neighboring RNC
Redundant
GSM cells can be
neighboring cells
Missing added.
Unique ID of a
neighboring cells /
RMV U2GNCELL GSMCellIndex GSM cell RNC
Redundant
neighboring cells

08/24/2023 华为保密信息,未经授权禁止扩散 第82页，共633页

 686970386.xls 文档密级

Operation
Version MAE Value Range and Unit
Description
Add the basic
information of the
GUI Value Range: 0 to 65535
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic GUI Value Range: 1 to 64
information of the characters
RAN16.0 and later GSM, GPRS, or Unit: None
EDGE cell to the Actual Value Range: 1 to 64
Add
RNC.the basic characters
information of the
Default Value: 0
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the Value Range: OFF, ON
RAN16.0 and later GSM, GPRS, or Default Value: OFF
EDGE cell to the Unit: None
Add
RNC.the basic
information of the
Value Range: 3 digits
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 2 to 3 digits
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 31
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 1 to 65533, 65535
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the Value Range: NOT_REQUIRE,
RAN16.0 and later GSM, GPRS, or REQUIRE
EDGE cell to the Unit: None
Add
RNC.the basic
information of the
Value Range: 0 to 255
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 65535
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 7
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 7
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 1023
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic Value Range:
information of the
GSM900_DCS1800_BAND_US
RAN16.0 and later GSM, GPRS, or
ED, PCS1900_BAND_USED
EDGE cell to the
Add Unit: None
RNC.the basic Value Range: NO_CAPABILITY,
information of the
GSM, GPRS, EDGE
RAN16.0 and later GSM, GPRS, or
Default Value: GPRS
EDGE cell to the
Unit: None
RNC.

08/24/2023 华为保密信息,未经授权禁止扩散 第83页，共633页

 686970386.xls 文档密级

Add the basic

information of the Value Range: USED,
RAN16.0 and later GSM, GPRS, or NOT_USED
EDGE cell to the Unit: None
Add
RNC.the basic
information of the
Value Range: 0 to 7
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: 0 to 99
RAN16.0 and later GSM, GPRS, or
Unit: dB/dBm
EDGE cell to the
Add
RNC.the basic
information of the Value Range: NC0, NC1, NC2,
RAN16.0 and later GSM, GPRS, or RESET
EDGE cell to the Unit: None
Add
RNC.the basic
information of the
Value Range: FALSE, TRUE
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE cell to the
Add
RNC.the basic
information of the
Value Range: FALSE, TRUE
RAN16.0 and later GSM, GPRS, or
Unit: None
EDGE
Use cell
this to the
command
Add
RNC. the basic
to add a
information of the
neighboring GUI Value Range: -50 to 50
RAN16.0 and later GSM, GPRS,GSM or
cell for cell
a UMTS Unit: dB
EDGE
Use this to the
command
cell.
RNC. After this
to add a is
command
neighboring GSM GUI Value Range: 0 to 4095
RAN16.0 and later executed, the
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM GUI Value Range: 0 to 65535
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: 0 to 65535
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: -50 to 50
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: dB
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: -50 to 50
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: dB
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: -58 to -13
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: 2dBm
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of Value Range: D0, D10, D20,
neighboring GSM
RAN16.0 and later executed,
the UMTS the
cell. D30, D40, D50, D60
cell
added for a UMTS
GSM cell Unit: s
Use
cell. this
Aftercommand
becomes
to add a athis
command
neighboring is cell of Value Range: D3, D6, D9, D12,
RAN16.0 and later executed, theGSM D15, D18, D21, INFINITY
the UMTS
cell for a UMTScell.
added
Use GSM
this cell
command Unit: dB
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added GSM cell
cell.
becomesAfter athis
command
neighboring is cell of
Value Range: 0 to 30
RAN16.0 and later executed,
the UMTS cell. the
Unit: None
added GSM cell
becomes a
neighboring cell of
the UMTS cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第84页，共633页

 Use this command
to add a
neighboring GSM 686970386.xls 文档密级
cell for a UMTS
Use this command
cell. After this
to add
command a is
neighboring GSM Value Range: -24 to 0
RAN16.0 and later executed, the
cell for a UMTS Unit: dB
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: 0 to 63
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: 0 to 15
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: OFF, ON
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: 0 to 99
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: dB/dBm
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: FALSE, TRUE
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added
Use GSM
this cell
command
cell.
becomesAfter athis
to add
command a is cell of
neighboring GSM Value Range: 0 to 7
RAN16.0 and later executed,
the UMTS the
cell.
cell for a UMTS Unit: None
added GSM cell
cell.
becomesAfter athis
command
neighboring is cell of
Default Value: SONOPTI
RAN16.0 and later executed,
the UMTS cell. the
Unit: None
added GSM cell
becomes
Modify a a
neighboring cell GSMof GUI Value Range: 0 to 4095
RAN16.0 and later the UMTS cell.
cell for a WCDMA Unit: None
cell.
Modify a
neighboring GSM GUI Value Range: 0 to 65535
RAN16.0 and later
cell for a WCDMA Unit: None
cell.
Modify a
neighboring GSM GUI Value Range: 0 to 65535
RAN16.0 and later
cell for a WCDMA Unit: None
cell.
Modify a
neighboring GSM Default Value: TRUE
RAN16.0 and later
cell for a WCDMA Unit: None
cell.
Modify a
neighboring GSM Value Range: 0 to 63
RAN16.0 and later
cell for a WCDMA Unit: None
cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第85页，共633页

 686970386.xls 文档密级

Remove a
neighboring GSM GUI Value Range: 0 to 4095
RAN16.0 and later
cell of a WCDMA Unit: None
cell.
Remove a
neighboring GSM GUI Value Range: 0 to 65535
RAN16.0 and later
cell of a WCDMA Unit: None
cell.
Remove a
neighboring GSM GUI Value Range: 0 to 65535
RAN16.0 and later
cell of a WCDMA Unit: None
cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第86页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
values
theofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values ofparameters
Range-value these parameters based
(User defined
on the objects
priority): include that
theare filtered according
parameters for which
to
thealgorithm requirements.
MAE calculates optimization values
according to algorithm requirements and
the value range
Range-value of each parameter
parameters: include theon the
MAE client or
parameters foron NEs.the MAE calculates
which
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements parameters
Range-value and the value range
(User of each
defined
parameter on thethe
priority): include MAE client or on
parameters forNEs.
which
the MAE calculates optimization values
according to algorithm requirements and
the value range of each parameter on the
MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第87页，共633页

 686970386.xls 文档密级
Range-value parameters (User defined
priority): include the parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value
the value range parameters (User defined
of each parameter on the
priority): include the
MAE client or on NEs. parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Identity-related
the value rangeparameters: includeon the
of each parameter
parameters such
MAE client or on NEs.as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the
Range-value values of include
parameters: these the
parameters.for which the MAE calculates
parameters
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters: include
the MAE client or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
parameter on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第88页，共633页

 686970386.xls 文档密级

Range-value parameters: include the

parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters:
and the value includes
range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters such thatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based
Range-value
on the objectsparameters: include
that are filtered the
according
parameters for which
to algorithm requirements. the MAE calculates
optimization values according to algorithm
requirements and the value range of each
parameter on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第89页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第90页，共633页

 This parameter
works with CIO.
686970386.xls The sum of 文档密级
CIOOffset, CIO,
and the actual
measured value
are used Parameter for UE
Optimization Type MML Command Parameter NE
event evaluation or
Description
decisions on
Periodic addition of missing handovers
neighboring cells / Quick ADD ID of an RNC
triggered by the
RNCId RNC
addition of missing UINTRAFREQNCELL RNC. In a
neighboring cells Determines
handover
Periodic addition of missing
neighboring cells / Quick ADD whether
algorithm,
Unique
Cell offset IDeventof a 1A
this
used cell
for RNC
CellId threshold
parameter is is used
addition of missing UINTRAFREQNCELL CPICH
Flag RSCP
of whether
neighboring cells affected
for moving
measurement when the the
Periodic addition of missing adding a cell into
cell
border
Unique is added
of
RNC a to the
cell.
neighboring cells / Quick ADD value
the active in cell setID willof
NCellRncId active
a set. If this
neighboring cell RNC
addition of missing UINTRAFREQNCELL selection
affect the or relative
parameter
In the case isofsetan to
reselection
threshold when
neighboring cells
Periodic addition of missing Cell offsetof
"NOT_AFFECT",
event-based used the for
intra-
the
event
Unique UE1B. is
IDinofidle a
neighboring cells / Quick ADD CPICH
the relative
frequency Ec/No
NCellId mode.
neighboring cell RNC
addition of missing UINTRAFREQNCELL measurement
threshold of event or
This
value parameter
in cell is a
neighboring cells 1A is not
inter-RAT
Offset of affected
Periodic addition of missing flag
Cell
selectionof whether
offset or used for
when the
measurement,
neighboring cell isthe
cell
neighboring cells / Quick ADD adding
CPICH
reselection the
RSCP cell
when into
CIOOffset added
UE
CPICH to
determines the active RNC
addition of missing UINTRAFREQNCELL the active
measurement
the UE istois,set
in will
idle
set.
whether That
measurement the
trigger cell
neighboring cells affect
value
mode. thecell
in relative
Periodic addition of missing signals
an
Cell
value.event
offsetare
This N/A for
according
used
Whether
threshold
selection toof
or send
the
neighboring cells / Quick ADD when
to
CPICHthe
parameter the
sumEc/NoUE of
is used RNC
system
CellsForbidden1A event
reselection 1B information
when
addition of missing UINTRAFREQNCELL Offset
evaluates
CIOOffset,
measurement of whether CIO,
for
block RSCP
NOT_AFFECT:11is(SIB11)
neighboring cells the
event
and UE
neighboring
the1A in cell be
should
actual
Periodic addition of missing value
including
Adding inthe
measurement. cell
the cell The into
connected
CPICH
triggered.
measured mode.
Ifvalue.
this
neighboring cells / Quick ADD selection
offset
neighboring
the active or
is subtracted
set cell
does
CellsForbidden1B measurement
parameter
The UE
reselection does iswhennotto RNC
set
addition of missing UINTRAFREQNCELL from
not
During thecell
information.
affect the
value.
"AFFECT",
consider This the thevalue
the UE is
neighboring in
neighboring cells
Periodic addition of missing
relative
selection
parameter
relative
of this oriscell
threshold
threshold
parameter used
connected
measurement
The
of the value
event mode.
FALSE1B.
neighboring cells / Quick ADD reselection,
for
of
when Ec/No
event 1A
evaluating is an RNC
SIB11Ind value
indicates
The before
cell
QOffset1sn that
signal iscell
thewill
the
addition of missing UINTRAFREQNCELL measurement.
affected
inter-frequency
During when
cellUEIn The
the
reselection.
neighboring
affect
cell the
offset
neighboring cells offset is is
measurement
selection subtracted
added or istonot the
Periodic addition of missing handover
information
evaluate whether
corresponding
from
active
event. theset. That tois,
neighboring cells / Quick ADD reselection,
algorithms,
included
event 1B in this
SIB11.
should
IdleQoffset1sn CPICH
Whethercell RSCP,
neighboring
the to
signals send
cell and
are RNC
addition of missing UINTRAFREQNCELL QOffset1sn
parameter is is the
The
occur. value
QOffset2sn
SIB12
measurement
involved
In the
AFFECT:
carrying
case when
TRUEisused
of the
a the
the
neighboring cells cell
for offset
moving
indicates
Adding the that the
cell the into
Periodic addition of missing cell
value
UE offset
neighboringbefore
evaluates
periodical inter-cell
cell
corresponding
border
neighboring
the active of a set cell. to
neighboring cells / Quick ADD corresponding
information.
reselection.
whether
frequency event In 1Ato
IdleQoffset2sn CPICH
This
affects RSCP,
parameter
information the is For
relative and
can RNC
addition of missing UINTRAFREQNCELL CPICH
handover
should
measurement Ec/No.
be or
QOffset2sn
be configured
included
threshold inof is
SIB11.
thethe
by
neighboring cells details
The value
algorithms,
triggered.
inter-RAT about FALSE
this
Periodic addition of missing cell Radio
the
event offset
1B.that Network
The cell
QOffset1sn
indicates
parameter
measurement, is andthe
usedthe
neighboring cells / Quick ADD corresponding
Planner
signal (RNP)
will not to
affect
SIB12Ind QOffset2sn,
neighboring
for
RNC moving
determines thesee RNC
addition of missing UINTRAFREQNCELL CPICH
based
the UETS onEc/No.
the
evaluate For
3GPP
information
border
whether of a 25.331.
is
cell.
to initiate not
neighboring cells
Periodic addition of missing
details about
actual network.
whether event 1B If a
included
This
handover inbased
parameter SIB12. can
neighboring cells / Quick ADD
QOffset1sn
this
should parameter
QOffset1sn occur. and
and is on
The
be
the value
configured
sum of TRUE by
ConnQoffset1sn QOffset2sn,
set to a larger see RNC
addition of missing UINTRAFREQNCELL QOffset2sn
indicates
the Radiothat
CIOOffset, are
Network
CIO, the
3GPP
value, TS
the 25.331.
neighboring cells Penalty
used
neighboring
Planner
and when
the time
(RNP)
actual theforUE
Periodic addition of missing probability for cell
hierarchical
is in idle
information
based
measured on mode,
the cell
is
value.
neighboring cells / Quick ADD QOffset1sn
reselection and
ConnQoffset2sn reselection
while
included
actual after a RNC
in SIB12.
network.
addition of missing UINTRAFREQNCELL QOffset2sn
reduces. are
Cell
UE offset used
reselects
ConnQoffset1sn a for
neighboring cells used when the UE
Periodic addition of missing CPICH
hierarchical
and
Note that RSCP in cell.
FDD
is in idlethatmode,
neighboring cells / Quick ADD TpenaltyHcsResele Note
measurement
The in FDD
hierarchical
ConnQoffset2sn
mode, this
while
mode, this RNC
addition of missing UINTRAFREQNCELL ct value
cell
are in is valid
reselection
used
parameter
Cell offsetwhen
ConnQoffset1sn
parameter used
is valid
the
for
neighboring cells hierarchical
function
UE
only iswhen enables
inEc/No
connected cell a
SIB11
Periodic addition of missing CPICH
and
only
mode. inwhen
selection
UE
Indicator idleis or SIB11to
modeset as
neighboring cells / Quick ADD measurement
ConnQoffset2sn
Indicator
TempOffset1 reselection.
reselect
ConnQoffset1sn
TRUE. ais set as RNC
addition of missing UINTRAFREQNCELL value
are used
TRUE. in when the
hierarchical
and cell in
neighboring cells hierarchical
UE is in connected cell
Periodic addition of missing If
the
Forthis parameter
network.
ConnQoffset2sn
details, see is
selection
mode.
For details, or see
neighboring cells / Quick ADD set
are
3GPP to
validINFINITY,
TS only
25.331. if thea
TempOffset2 reselection.
ConnQoffset1sn
3GPP RNC
addition of missing UINTRAFREQNCELL SIB12 TS
neighboring message 25.331.
cell is
neighboring cells and
not selected
available. The as the
If this parameter
ConnQoffset2sn is
target
measured cell. value of
set to
are validINFINITY,
only if the a
the neighboring
neighboring cell cell
is
SIB12 message
minus
not selected the value as the of
available. The
this parameter
target cell. value of is
measured
used for cell
08/24/2023 华为保密信息,未经授权禁止扩散the neighboring cell
reselection ranking.
minus the value of
第91页，共633页
This parameter
this parameter is
needs to be set
used for cell
based on the
 Band6:
Priority
The value ULTRUE
of
frequency
Indicator
neighboring
indicates for= cells.
that DL
anthe
This parameter
frequency
MBMS
The priority
neighboring - 225
neighboring cell
indicates the DL
cell.
assigned
priority
frequency
Host When
typeis to ofthis
aaa cell
cell.
686970386.xls Band7:
parameter
neighboring
configured. ULof is set is
cell to 文档密级
when
frequency the RNC
= DL
TRUE,
valid
When
Depending
node onlythe
the when
redundancy current
algorithm
on the this
frequency
neighboring
parameter
of neighboring -is600
cell
setcellis
to
Periodic addition of missing value
feature
Source of of is[BandId],
enabled.
an
"TRUE".
as
If MBMS
combination
shown
this The
parameter below: is
neighboring cells / Quick ADD neighboring
Band8: UL bycells.
NPrioFlag neighboring
(controlled
set to cell.
cell RNC
addition of missing UINTRAFREQNCELL When
frequency this = DL
When
with a
HO_MC_NCELL_C
Band1
SINGLEHOST, this
lower priority
neighboring cells parameter
frequency -is setthe to
Periodic addition of missing parameter
is more
OMBINE_SWITCH
cell is225
possibly
is controlled set by to
USER, neighboring
neighboring cells / Quick ADD FALSE,
delivered
)Common
is
only enabled,
one theas
RNC. If current
the
NPrio cells
Band9: areUL configured RNC
addition of missing UINTRAFREQNCELL neighboring
measurement
total number
frequencies
this parameter cell
ofisis
by users.
frequency When
= DL
neighboring cells not
object.an MBMS
neighboring
[10562-10838]
set to For cells to
Periodic addition of missing this parameter
frequency - 475 is
neighboring
example,
all cells
DOUBLE_HOST, inthe the cell.
neighboring cells / Quick ADD set to SONOPTI,
MbmsNCellInd neighboring
active
Special
the cell set may cell RNC
addition of missing UINTRAFREQNCELL neighboring
If the
The
with
exceed DLis
Multimedia
priority
32frequency
if 1
cells
is
more
neighboring cells frequencies
controlled
are configured by none
two by
Periodic addition of missing belongs
Broadcast
more
than tolink
possible
one special to
exists
RNCs
the SON
frequencies, including
feature then
neighboring cells / Quick ADD Multicast
be
in selected
the
Band2 active Serviceas
set.the
UintraNcellSRC SRNC.
based on If this
the RNC
addition of missing UINTRAFREQNCELL (MBMS)
measurement
The
parameterRNC feature
considers
is set to
optimization
Band2: UL the as
neighboring cells provides
object
this
Common than
parameter
DOUBLE_HOST_
Periodic addition of missing results.
frequency When = cell
DL this
unidirectional
neighboring
one of
frequencies
OUT_POOL, conditions point-
[9662-
the
neighboring cells / Quick Identifying
parameter
frequency isa
- 400 set to
ADD UEXT3GCELL NRncId to-multipoint
with RNC
addition of missing for
9938]
cell ispriority
selecting
Neighboring
SONMEAS, controlled 2.the
RNC. by
multimedia
neighboring
two RNCs cells.
neighboring cells neighboring
Band4: cells
Periodic addition of missing services.
That
Special
excluding
Uniquely
are is, UL ItSRNC.
allows
a identifying
configured
neighboring cells / Quick frequency
data tothe
neighboring be = {412, DL
cell
ADD UEXT3GCELL CellId frequencies
When
a neighboring
during the primary RNC RNC
addition of missing frequency
transmitted
with a high - priority
300
from
437,
RNC
cell. 462,
is faulty,
optimization 487, ofthe 512,
the
neighboring cells one
is
537, source
preferentially
562, 587,to 612,
Periodic addition of missing cell
SON
Band5: is controlled
feature,
UL which by
neighboring cells / Quick multiple
selected.
637,
the 662,
secondary If687}
a
helps
frequency detect = cell
DL is RNC
ADD UEXT3GCELL CellHostType destinations.
neighboring
addition of missing RNC.
missing
frequency - 225
neighboring cells not
Band3 configured
neighboring with
cells.
Periodic addition of missing the priority flag, the
An RNC
Band6:priority pool
UL a cell is
neighboring cells / Quick Identifying
lowest
Common is
ADD UEXT3GCELL CellName composed
frequency ofDL RNC
addition of missing name.
assigned
frequencies
NodeBs, to= this
primary[1162-
neighboring cells frequency
cell. - 225
Periodic addition of missing 1513]
RNC, and
Index of the
neighboring cells / Quick secondary
Band7:
This UL
parameter RNC.
ADD UEXT3GCELL CnOpGrpIndex operator
Special group that RNC
addition of missing The
frequency
indicateshost type
= DLfor
whether
serves
frequencies a cell. none
neighboring cells RNCs
frequency is configured
- 225
Periodic addition of missing to configure the UL
neighboring cells / Quick on the
frequency
Primary NodeB of the
downlink side.
ADD UEXT3GCELL PScrambCode Band4
addition of missing The
Depending
cell. RNC
scramblingTRUE code. nodeon the RNC
neighboring cells redundancy
value
indicates
This parameter thatfeature
of [BandId], the
Periodic addition of missing Common
is introduced to
as
UL shown
frequency
specifies below:
the need
neighboring cells / Quick frequencies
resolve the [1537-
ADD UEXT3GCELL BandInd be reconfigured.
selected frequency RNC
addition of missing 1738]
breakdown issue
Band1
FALSE
bands during indicates cell of
neighboring cells an RNC. When a
Periodic addition of missing that
setup. the UL
Special
single point of
neighboring cells / Quick Common
frequency need not
ADD UEXT3GCELL UARFCNUplinkInd frequencies
failure occurs{1887, on It RNC
addition of missing frequencies
be reconfigured. [9612-
1912,
the 1937,RNC,
primary 1962,
neighboring cells 9888]
is configured
Periodic addition of missing 1987,
the 2012, 2037,
secondary
automatically
neighboring cells / Quick 2062,
RNC 2087}over
takes
ADD UEXT3GCELL UARFCNUplink Whether
based ontothe
Special activate RNC
addition of missing NodeBs
the transmit controlled
frequencies
relationship none
neighboring cells Band5
by the primary
Periodic addition of missing diversity
between mode
UL and for
neighboring cells / Quick RNC
common
Band2 to ensure
DL frequencies. channels that
ADD UEXT3GCELL UARFCNDownlink Common
the NodeBs work RNC
addition of missing in
NULLa cell.
ID of aindicates
frequencies
properly. secondary [4357-
neighboring cells Common
that the UL
Periodic addition of missing RNC.
4458]
Transmit
frequencydiversity
frequencies [9262-
remains
neighboring cells / Quick
ADD UEXT3GCELL SlaveNRncId enables
9538]
unchanged. the RNC
addition of missing Secondary
Special RNC is
transmit end to use
neighboring cells a redundancy
frequencies for
{1007,
Periodic addition of missing two
Special or more
the
1012, primary
1032,RNC. 1037,
neighboring cells / Quick antennas
frequencies for{12,
ADD UEXT3GCELL TxDiversityInd 1062, 1087} RNC
addition of missing transmitting
37, 62, 87, 112,
neighboring cells signals.
137, 162, Each187, 212,
Periodic addition of missing Band6
This
237, parameter
antenna 262,is287}
neighboring cells / Quick
ADD UEXT3GCELL LAC identifies
assigned adifferent location RNC
addition of missing Common
area
weight
Band3 code.
coefficients,
neighboring cells frequencies [4387-
such as amplitude
4413]
and
Common phase, to
improve
frequencies the [937-
Special
reception
1288]
frequencies {1037,
performance of the
1062}
receive
Special end.
08/24/2023 华为保密信息,未经授权禁止扩散frequencies none 第92页，共633页
Band7
Band4
Common
 only when the
This
measured parameter CPICH
identifies
Ec/No is greater whether
to
than configure
the value RAC. of
686970386.xls If the
this parameter. RNC 文档密级
supports the PS
domain,
For FDDthis cells, the
Periodic addition of missing
parameter
cell selection must be
neighboring cells / Quick Default time offset
ADD UEXT3GCELL CfgRacInd set
criterion to REQUIRE. RNC
addition of missing used for S in the
activating
neighboring cells 25.304
a new configuration protocol is
Periodic addition of missing Time
GUI Value
defined that ascan Range: be
follows:
ifThis theparameter
reconfigured
neighboring cells / Quick taken
Default
NOT_REQUIRE(N bytime the offset
ADD UEXT3GCELL RAC RL
indicates transmits the RNC
addition of missing NodeB
used
ot
Srxlev>0 fortoactivating
configure process
AND RAC
signaling
routing area at acode. rate
neighboring cells an
a newNBAP
information),
Squal>0 RADIO
configuration
Periodic addition of missing of 13.6 kbit/s.
LINK
ifREQUIRE(Configur
the reconfigured
neighboring cells / Quick MidRateRlActTime
ADD UEXT3GCELL Time
RECONFIGURATI
RL
e RAC
Where: that
transmits can be
information) RNC
addition of missing DefOffVal This parameter is
taken
ON
signaling by the
COMMIT at a rate
neighboring cells an
NodeB advanced
Periodic addition of missing message
of
- Squal 27.2 to process
= during
kbit/s. a
parameter. To
neighboring cells / Quick HighRateRlActTime an
Qqualmeas NBAP
reconfiguration RADIO- be if
ADD UEXT3GCELL Time
modify thatthiscan RNC
addition of missing DefOffVal LINK
the
This reconfiguredis
takenparameter
Qqualmin
parameter, by thecontact
neighboring cells RECONFIGURATI
RL
an transmits
advanced
Periodic addition of missing NodeB
Huawei to process
Customer
ON
signaling
parameter.
-ServiceSrxlevCOMMIT =at a rate
To
neighboring cells / Quick OamGuardValForL an NBAP RADIO
Center for
ADD UEXT3GCELL message
of
modify
Qrxlevmeas3.4 kbit/s
this duringor
- 6.8 a RNC
addition of missing owRate LINK
technical support.
Time
reconfiguration
kbit/s.
parameter,
Qrxlevmin - offset used
contact if
neighboring cells RECONFIGURATI
Periodic addition of missing for
the
Huawei activating
reconfigured
Pcompensation Customer a new
ON COMMIT
neighboring cells / Quick OamGuardValForM configuration
RL
This
Service transmits
parameterCenter for is
ADD UEXT3GCELL message during a RNC
addition of missing idRate during
signaling
an
technical
- Qqualmeasadvanced a hard
at a
support. rate
is ifthe
Time
reconfiguration offset used
neighboring cells handover
of
parameter.
measured 13.6 kbit/s. ifcell
the
To
Periodic addition of missing for
the activating
reconfigured a new
reconfigured
modify
quality this RL
value,
neighboring cells / Quick OamGuardValForH configuration
RL transmits
ADD UEXT3GCELL transmits
This
parameter,
namely parameter signaling
CPICH contact is RNC
addition of missing ighRate Default
during atime
signaling at aoffset
hard rate
at
an
Huawei
Ec/No. a rate
advanced of
Customer3.4
neighboring cells used
handover
of 27.2 forkbit/s.
activating
if the
Periodic addition of missing kbit/s
parameter.
Service or Center
6.8To kbit/s
a new configuration
reconfigured RLfor
neighboring cells / Quick ActTimeDefOffValF and
modify
technical
-for no
Qrxlevmeas HSPA
this support. is isthe RNC
ADD UEXT3GCELL transmits
This a parameter signaling
addition of missing orUncellNoH This
service
parameter, parameter
exists. contact
measured rate ofcell
reconfiguration
at aadvanced
an 3.4 RX
neighboring cells indicates
Huawei whether
Customer
Periodic addition of missing level
performed
kbit/s
parameter. value,
or 6.8within namely
kbit/s
To
to
This
Service configure
parameterCenter the is
neighboring cells / Quick CPICH
ActTimeDefOffValF the
and
modify same
an this RSCP.
HSPA cell if for the
ADD UEXT3GCELL minimum
an
technical advanced quality
support. RNC
addition of missing orUncellH reconfigured
service
parameter, exists. radio
contact
level.
parameter. WhenTo it is set
neighboring cells -link Qrxlevmin
Huawei transmits Customer is the
Periodic addition of missing to
modify FALSE, the UE
thisrequired
minimum
signaling
This
Service parameter at a rate
Center is
for
neighboring cells / Quick ActTimeDefOffValF adopts
parameter, the contact
ADD UEXT3GCELL quality
of
an 3.4
technical level
kbit/s
advanced in the
or
support. 6.8 RNC
addition of missing orSameCell corresponding
Huawei Customer
cell.
kbit/s.
parameter. To
neighboring cells Minimum
value
Service of Centerrequired
the current for
Periodic addition of missing Whether
modify this to
RX
serving
technical threshold cell, added
support.
neighboring cells / Quick configure
-ThisPcompensation
parameter the =
ADD UEXT3GCELL QqualminInd
parameter,
corresponding
through the ADD
contacttois RNC
addition of missing minimum
max(UE_TXPWR_
an
Huawei advanced receive
Customer
the CPICH RSCP.
UCELLSELRESEL
neighboring cells level
MAX_RACH-
parameter.
Service for Center
a cell.To Iffor
Periodic addition of missing A UE can
command. camp
This on
this
P_MAX,
modify
technical parameter
this 0)
support. is
neighboring cells / Quick Whether
a cell onlya ifis
parameter cell
the
ADD UEXT3GCELL Qqualmin set to FALSE,
parameter, the RNC
contact
addition of missing supports
generally the
measured setCPICH to
UE
-Huawei
ExtendedusesCustomer the
value value
neighboring cells minimum
RSCP
FALSE.isWhen receive
greater it for
is
Periodic addition of missing of this
UE_TXPWR_MAX
Service
the minimumparameter
Center for
level
than
set to extension
theTRUE, valuethe of
neighboring cells / Quick set
_RACH in ADD
technical
receive issupport.
level.the The
ADD UEXT3GCELL QrxlevminInd function.
this
UE adoptsparameter. the RNC
addition of missing UCELLSELRESEL
maximum
actual TX
value inminimum ADD
neighboring cells for
power
receivethe levelcell.
levelIn aisUE
Periodic addition of missing The
Setting
UEXT3GCELLminimum this
normal
may use cases,
when this
neighboring cells / Quick equal
receive
parameter
command. tolevelthebased sum of
ADD UEXT3GCELL Qrxlevmin parameter
accessing is set
the cell to RNC
addition of missing Qrxlevmin
extension
on the setting andof
function
FALSE.
on RACH, This namely
neighboring cells DeltaQrxlevmin.
refers
Qqualmin. to that the
Periodic addition of missing parameter
MaxAllowedULTxP affects
sum of Qrxlevmin
neighboring cells / Quick the
ower. cell camping
ADD UEXT3GCELL QrxlevminExtSup The If thisminimum
and parameter is RNC
addition of missing This
success parameter rate of
receive
not set, level
DeltaQrxlevmin the UE is
neighboring cells indicates
UEs
-extension
P_MAX in idle whether
mode.
isfunction
the
Periodic addition of missing used
uses the as the value actual of
to configure
maximum RF the
neighboring cells / Quick refers
minimum
Qrxlevmin to that receive
set the
in
ADD UEXT3GCELL DeltaQrxlevmin maximum
output power TX of the RNC
addition of missing sum
level
ADD of
when Qrxlevmin the
power.
UE.
neighboring cells and
value
UCELLSELRESELof Qrxlevmin
Periodic addition of missing
DeltaQrxlevmin
is less than -115is
neighboring cells / Quick MaxAllowedUlTxPo for GUI
As
the
forValue cell.Range:
thethe impact
ADD UEXT3GCELL used
dBm.
Usually, as this actual RNC
addition of missing werInd TRUE(Configure
on network
minimum
parameter receive
neighboring cells the maximumnot
performance:
is
level
For when about
set. details the
uplink power of
value of Qrxlevmin
this parameter, see
UE),
The FALSE(Not
larger the
is
3GPPless than25.331.
TS -115
configure
value the
dBm. of the
maximum
parameter uplink is, the
power
more of UE) it is
difficult
For details about
08/24/2023 华为保密信息,未经授权禁止扩散for thisthe UE to camp
parameter, 第93页，共633页
see
on the
3GPP TS 25.331.cell. The
smaller the value of
the parameter is,
 5)EDCH_2MS_TTI
specifies
_SUPPORT(E- the
maximum
DCH 2ms TTI allowed
uplink TX
support power of
indicator):
686970386.xls a UE in
when the the cell.
indicator 文档密级
When this
is TRUE, it means
parameter
that the cellis not
Periodic addition of missing set to any
support value,
E-DCH
neighboring cells / Quick MaxAllowedUlTxPo Whether
the UE
2ms TTI. a cell the
adopts
ADD UEXT3GCELL RNC
addition of missing wer uses HCS.
corresponding
neighboring cells value of the current
6)EDCH_2SF2_AN
Periodic addition of missing HCS priority of the
In a
servingHCS
D_2SF4_SUPPOR network,
cell, added
neighboring cells / Quick cell belongs to. Set
ADD UEXT3GCELL UseOfHcs macro
throughcells
T(E-DCH the max provide
ADD SF RNC
addition of missing a high HCS priority
continuous
UCELLSELRESEL
support
neighboring cells for a cell if the cell
Periodic addition of missing coverage
command.
2SF2+2SF4 and
coverage is small.
neighboring cells / Quick micro
Generally,cells
indicator): provide
this
ADD UEXT3GCELL HCSPrio The value when 0 RNC
addition of missing hotspot
parameter
the indicator coverage.
is not
indicates the is
neighboring cells set to any
Periodic addition of missing TRUE,
Whether
lowest HCS tovalue.
it means support
priority
Quality
that the threshold
cell hasthe E-
neighboring cells / Quick the
andmode7 indicates change
ADD UEXT3GCELL Qhcs for
DCH HCS SF capability RNC
addition of missing of downlink
highest HCSpower
reselection.
of 2SF2+2SF4.
neighboring cells control.
priority. Downlink
Periodic addition of missing
power control
neighboring cells / Quick SuppDpcmodeChg 7)EDCH_2SF2_SU
ADD UEXT3GCELL includes slow RNC
addition of missing Flag PPORT(E-DCH
Indicator
power control for closed and
neighboring cells STTD
max SF indicator.
Periodic addition of missing loop TX support
fast power diversity
control.
This
2SF parameter
indicator):
neighboring cells / Quick mode
For details1. This about
ADD UEXT3GCELL STTDSupInd indicates
when the whether
indicator a RNC
addition of missing parameter
this parameter, see
cell
is supports
TRUE, it means
neighboring cells Adjustment
indicates
3GPP TSwhether offset a
25.433.
Periodic addition of missing STTD.
that the cell hasTX E-
for
cellclosed
supports loop
neighboring cells / Quick DCH
ADD UEXT3GCELL CP1SupInd closedSF
diversity loop capability
mode TX 1. RNC
addition of missing of 2SF2.
For remote
diversity mode cells,1.
neighboring cells
Periodic addition of missing the
For recommended
details about
neighboring cells / Quick ClosedLoopTimeAd 8)EDCH_2SF4_SU
value
closed isloopOFFSET2.
ADD UEXT3GCELL Specifies
PPORT(E-DCH theTX TX RNC
addition of missing justMode For othermode
diversity cells, 1, the
diversity
Specifies
max mode
SF support the TXon
neighboring cells recommended
see 3GPP
Periodic addition of missing F-DPCH
diversity
2SF4 forTS
mode
indicator): theon
value
25.214. is OFFSET1.
neighboring cells / Quick DpchDivModforOth non-MIMO
DPCH
when for the
the indicatorusers non-
ADD UEXT3GCELL For details about RNC
addition of missing er and
MIMO
is non-DC-
TRUE, users it and
means
this offset, see
neighboring cells HSDPA
non-DC-HSDPA
that theTS users.
cell has
Periodic addition of missing Specifies
3GPP the
25.214. TXE-
users.
neighboring cells / Quick FdpchDivModforOt DCH
diversitySF mode capability on
ADD UEXT3GCELL According
of 2SF4. fortothe 3GPP RNC
addition of missing her F-DPCH
TS 25.211,
Whether the F-
to forbid
neighboring cells MIMO users.
Periodic addition of missing Specifies
DPCH
HSPA can
UEs from
9)EDCH_SF4_SUP theuse TX
neighboring cells / Quick DpchDivModforMI diversity
STTD
performing
PORT(E-DCH TX on DPCH
diversity
inter- max RNC
ADD UEXT3GCELL Specifies
Accordingthe to TX
3GPP
addition of missing MO mode
RNC
SF for
only.
inter- theFor MIMO
TS support
diversity
25.211, mode SF4
the for
F-
neighboring cells users.
details
frequency
indicator): about or this
inter-
Periodic addition of missing the
DPCH canwhen
DC-HSDPA use
parameter, see
neighboring cells / Quick FdpchDivModforMI RNC
the
users.
STTD intra-
indicator
TX diversity is
ADD UEXT3GCELL 3GPP
frequency TS 25.211. RNC
addition of missing MO TRUE,
mode only. it means For
neighboring cells handovers
that theabout
According
details cellto when
hasthisE-
3GPP
Periodic addition of missing
the
DCH
TS function
SF capability
25.211,
parameter, is DC-
the
see
neighboring cells / Quick DivModforDCHSDP Whether to enable
ADD UEXT3GCELL enabled.
of SF4. feature
HSDPA
3GPP When this RNC
addition of missing A HARQ TS 25.211.
preamble.
parameter
can use STTD is setTXto
neighboring cells When this
Periodic addition of missing NOT
diversity
GUI FORBIDDEN,
10)EDCH_SF8_SU
Value mode Range:
parameter is set to
neighboring cells / Quick CellCapContainerF these
only.
None, UEs
PPORT(E-DCH
ForSTTD are
details,
ADD UEXT3GCELL 0, HARQ preamble RNC
addition of missing dd allowed
max
see SF to perform
support
is not3GPPenabled. TS
neighboring cells such
SF8
25.211. handovers.
indicator):
Periodic addition of missing When this
Otherwise,
when the indicator these
neighboring cells / Quick OverLayMobilityFla parameter is set to
ADD UEXT3GCELL UEs
is TRUE,are not it means RNC
addition of missing g Cell
1, HARQindividual preamble
allowed
that the cell to perform
has E-
neighboring cells offset(CIO)
is enabled. When of a
Periodic addition of missing such
DCH handovers.
SF capability
serving
HARQ preamble cell, whichis
neighboring cells / Quick of SF8. with the
ADD UEXT3GCELL HarqPreaCap is used
enabled, HARQ RNC
addition of missing A UE processing
CIO offsettakes
preamble of the
neighboring cells HSPA+
11)EDCH_HARQ_I and R99
Periodic addition of missing neighboring
effect only oncell.
CS services is not
R_COMBIN_SUPP
neighboring cells / Quick For details about
HARQ-preamble-
ADD UEXT3GCELL CIO an HSPA UE.
ORT(E-DCH RNC
addition of missing this parameter,
enabled UEs. Insee
neighboring cells support
3GPP TSACK, HARQ25.331 IR
addition,
In a stack network,
Combining
and
NACK, description
CQI, of
cells underwhen
indicator): the
CIOOffset
preamble, in and the
same
the sector is
indicator
ADD
postamble
belong
TRUE, ittomeans
different
UINTERFREQNCE
messages can be
vendors
that the anduse IR
cell
LL.
carried over the
therefore
combine Mode these
08/24/2023 华为保密信息,未经授权禁止扩散HS-DPCCH. cells
whenare MAC-e controlled 第94页，共633页
PDUs
by
aredifferent
receivedRNCs. more
than one time in E-
DCH.
 Access point (AP)
686970386.xls cell indicator. 文档密级
When the indicator
is "TRUE",support
E_FACH it
Periodic addition of missing indicates
indicator. that
When thethe
neighboring cells / Quick cell is an is
indicator APTRUE,
cell.
ADD UEXT3GCELL EFachSupInd RNC
addition of missing AP is a device
it indicates thatfor
the
neighboring cells accessing
cell supports the
Periodic addition of missing
UMTS
E_FACH. wireless
neighboring cells / Quick Indicates whether
ADD UEXT3GCELL APFlag network. This RNC
addition of missing the videophone
device integrates
neighboring cells (VP) service is
Periodic addition of missing the functions of the
limited in a cell.
neighboring cells / Quick NodeB software
ADD UEXT3GCELL VPLimitInd When the indicator RNC
addition of missing and parts of the
Periodic addition of missing is "TRUE", it
neighboring cells functions of the
neighboring cells / Quick indicates that the
RNC software. It is
addition of missing RMV VP service is
RNCId ID of anto
applied
Whether RNC RNC
neighboring cells / UINTRAFREQNCELL limited in to the cell.
Periodic addition of missing households
configure theand
Redundant neighboring
neighboring cells / Quick SOHO
priority users.
flag for a
cells
addition of missing RMV neighboring
CellId Unique ID ofcell. a cell RNC
neighboring cells / UINTRAFREQNCELL
Periodic addition of missing
Redundant neighboring The value FALSE
neighboring cells / Quick
cells indicates thatIDtheof
addition of missing RMV Unique RNC
NCellRncId neighboring cell RNC
neighboring cells / UINTRAFREQNCELL a neighboring cell
Periodic addition of missing priority is not
Redundant neighboring
neighboring cells / Quick configured. In the
cells
addition of missing RMV Unique
algorithm IDofof a
NCellId RNC
neighboring cells / UINTRAFREQNCELL neighboring
neighboring cellcell
Redundant neighboring combination, the
cells cell with an invalid
MOD
Neighboring cell priority RNCId ID of an
priority is RNC
the last RNC
UINTRAFREQNCELL
one to be
considered as the
MOD Unique ID of a cell
Neighboring cell priority CellId measurement RNC
UINTRAFREQNCELL
object.
Unique RNC ID of
MOD Priority
The value of TRUE
Neighboring cell priority NCellRncIda neighboring
neighboring cell RNC
UINTRAFREQNCELL indicates thatcells.
the
The priority cell
neighboring
assigned
priority
Unique is IDtoofaa
MOD
Neighboring cell priority NCellId neighboring
configured. cell is RNC
UINTRAFREQNCELL
valid only when this
parameter is set to
When the algorithm
MOD "TRUE". The cell
of neighboring
Neighboring cell priority NPrioFlag RNC
UINTRAFREQNCELL neighboring
combination cell
with a lowerbypriority
(controlled
is more possibly
HO_MC_NCELL_C
MOD
Neighboring cell priority NPrio delivered as the
OMBINE_SWITCH RNC
UINTRAFREQNCELL
measurement
) is enabled, the
object. For of
total number
example,
neighboring thecells to
neighboring
all cells in thecell
with
activepriority
set may 1 is
more
exceed possible
32 if moreto
be
thanselected
one linkas the
exists
measurement
in the active set.
object
The RNC thanconsiders
the
neighboring
this parameter cellas
with
one ofpriority 2.
conditions
for selecting the
neighboring cells.
That is, a
neighboring cell
with a high priority
is preferentially
selected. If a
neighboring cell is
not configured with
the priority flag, the
08/24/2023 华为保密信息,未经授权禁止扩散lowest priority is第95页，共633页
assigned to this
cell.
 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to

RAN16.0 and GUI Value Range: 0 to 4095
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and GUI Value Range: 0 to 65535
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and GUI Value Range: 0 to 65535
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and GUI Value Range: 0 to 65535
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and Value Range: -20 to 20
add an intra-frequency
later Unit: 0.5dB
neighboring cell.
Use this command to Value Range: AFFECT,
RAN16.0 and
add an intra-frequency NOT_AFFECT
later
neighboring cell. Unit: None
Use this command to Value Range: AFFECT,
RAN16.0 and
add an intra-frequency NOT_AFFECT
later
neighboring cell. Unit: None
Use this command to Value Range: FALSE(Do not
RAN16.0 and
add an intra-frequency send), TRUE(Send)
later
neighboring cell. Unit: None
Use this command to
RAN16.0 and Value Range: -50 to 50
add an intra-frequency
later Unit: dB
neighboring cell.
Use this command to
RAN16.0 and Value Range: -50 to 50
add an intra-frequency
later Unit: dB
neighboring cell.
Use this command to Value Range: FALSE(Do not
RAN16.0 and
add an intra-frequency send), TRUE(Send)
later
neighboring cell. Unit: None
Use this command to
RAN16.0 and Value Range: -50 to 50
add an intra-frequency
later Unit: dB
neighboring cell.
Use this command to
RAN16.0 and Value Range: -50 to 50
add an intra-frequency
later Unit: dB
neighboring cell.
Use this command to Value Range: D0, D10, D20,
RAN16.0 and
add an intra-frequency D30, D40, D50, D60
later
neighboring cell. Unit: s
Use this command to Value Range: D3, D6, D9,
RAN16.0 and
add an intra-frequency D12, D15, D18, D21, INFINITY
later
neighboring cell. Unit: dB
Use this command to Value Range: D2, D3, D4, D6,
RAN16.0 and
add an intra-frequency D8, D10, D12, INFINITY
later
neighboring cell. Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第96页，共633页

 686970386.xls 文档密级

Use this command to

RAN16.0 and Value Range: FALSE, TRUE
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and Value Range: 0 to 30
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and Value Range: FALSE, TRUE
add an intra-frequency
later Unit: None
neighboring cell.
Use this command to
RAN16.0 and Use this command to Default Value: SONOPTI
add an intra-frequency
later add a UMTS cell under Unit: None
neighboring cell.
the neighboring RNC.
This command is
RAN16.0 and Use this command to GUI Value Range: 0 to 65535
applicable to the
later add a UMTS cell under Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to GUI Value Range: 0 to 65535
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC. GUI Value Range:
inter-Iur intra-frequency
This command is SINGLE_HOST,
RAN16.0 and Use this command
handover or inter- to
applicable to the DOUBLE_HOST,
later add a UMTS
frequency cell under
handover.
scenarios such as the DOUBLE_HOST_OUT_POOL
the neighboring RNC.
inter-Iur intra-frequency Unit: None
This command is GUI Value Range: 1 to 64
RAN16.0 and Use this command
handover or inter- to
applicable to the characters
later add a UMTS
frequency cell under
handover.
scenarios such as the Unit: None
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to GUI Value Range: 0 to 31
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 511
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC. Value Range: Band1, Band2,
inter-Iur intra-frequency
This command is Band3, Band4, Band5, Band6,
RAN16.0 and Use this command
handover or inter- to
applicable to the Band7, Band8, Band9,
later add a UMTS
frequency cell under
handover.
scenarios such as the BandIndNotUsed
the neighboring RNC.
inter-Iur intra-frequency Unit: None
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: TRUE, FALSE
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 16383
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 16383
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 4095
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: FALSE, TRUE
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is Value Range: 1 to 65533,
RAN16.0 and handover or inter-
applicable to the 65535
later frequency handover.
scenarios such as the Unit: None
inter-Iur intra-frequency
handover or inter-
frequency handover.

08/24/2023 华为保密信息,未经授权禁止扩散 第97页，共633页

 Use this command to 686970386.xls 文档密级
add a UMTS cell under
the neighboring RNC.
This command is Value Range: NOT_REQUIRE,
RAN16.0 and Use this command to
applicable to the REQUIRE
later add a UMTS cell under
scenarios such as the Unit: None
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 20 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: frame
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 20 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: frame
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 1000
applicable to the
later add a UMTS
frequency cell under
handover. Unit: ms
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 1000
applicable to the
later add a UMTS
frequency cell under
handover. Unit: ms
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 0 to 1000
applicable to the
later add a UMTS
frequency cell under
handover. Unit: ms
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 1 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: 10ms
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 1 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: 10ms
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: 1 to 255
applicable to the
later add a UMTS
frequency cell under
handover. Unit: 10ms
scenarios such as the
the neighboring RNC. Value Range: TRUE(Configure
inter-Iur intra-frequency
This command is the minimum quality threshold),
RAN16.0 and Use this command
handover or inter- to
applicable to the FALSE(Not configure the
later add a UMTS
frequency cell under
handover.
scenarios such as the minimum quality threshold)
the neighboring RNC.
inter-Iur intra-frequency Unit: None
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: -24 to 0
applicable to the
later add a UMTS
frequency cell under
handover. Unit: dB
scenarios such as the Value Range: TRUE(Configure
the neighboring RNC.
inter-Iur intra-frequency the minimum signal level for
This command is
RAN16.0 and Use this command
handover or inter- to access), FALSE(Not configure
applicable to the
later add a UMTS
frequency cell under
handover. the minimum signal level for
scenarios such as the
the neighboring RNC. access)
inter-Iur intra-frequency
This command is Unit: None
RAN16.0 and Use this command
handover or inter- to Value Range: -58 to -13
applicable to the
later add a UMTS
frequency cell under
handover. Unit: 2dBm
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: FALSE, TRUE
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: -2 to -1
applicable to the
later add a UMTS
frequency cell under
handover. Unit: 2dBm
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and handover or inter- Value Range: FALSE, TRUE
applicable to the
later frequency handover. Unit: None
scenarios such as the
inter-Iur intra-frequency
handover or inter-
frequency handover.

08/24/2023 华为保密信息,未经授权禁止扩散 第98页，共633页

 Use this command to 686970386.xls 文档密级
add a UMTS cell under
the neighboring RNC.
This command is
RAN16.0 and Use this command to Value Range: -50 to 33
applicable to the
later add a UMTS cell under Unit: dBm
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is Value Range: USED(HCS cell),
RAN16.0 and Use this command
handover or inter- to
applicable to the NOT_USED(Non HCS cell)
later add a UMTS
frequency cell under
handover. Value Range:
scenarios such as the Unit: None
the neighboring RNC. DELAY_ACTIVATION_SUPPO
inter-Iur intra-frequency
This command is RT(delay activation
RAN16.0 and Use this command
handover or inter- to
Value Range: 0 to 7support
applicable to the indication),
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the HSDSCH_SUPPORT(HSDSC
the neighboring RNC.
inter-Iur intra-frequency
H support indication),
This command is
RAN16.0 and Use this command
handover or inter- to
Value Range: 0 to 99
FDPCH_SUPPORT(F-DPCH
applicable to the
later add a UMTS
frequency cell under
handover. Unit: dB;indication),
support dBm
scenarios such as the
the neighboring RNC. EDCH_SUPPORT(E-DCH
inter-Iur intra-frequency
This command is support indication),
RAN16.0 and Use this command
handover or inter- to
Value Range: FALSE, TRUE
applicable to the EDCH_2MS_TTI_SUPPORT(E
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the -DCH 2ms TTI support
the neighboring RNC.
Value
inter-Iur intra-frequency Range:
indicator),
This command is
RAN16.0 and Use this command
handover or inter- to
STTD_Supported,
EDCH_2SF2_AND_2SF4_SU
applicable to the
later add a UMTS
frequency cell under
handover. STTD_not_Supported
PPORT(E-DCH max SF
scenarios such as the
the neighboring RNC. Unit: None
support 2SF2+2SF4 indicator),
inter-Iur intra-frequency
This command is Value Range: CP1_Supported,
EDCH_2SF2_SUPPORT(E-
RAN16.0 and Use this command
handover or inter- to
applicable to the CP1_not_Supported
DCH max SF support 2SF2
later add a UMTS
frequency cell under
handover.
scenarios such as the Unit: None
indicator),
the neighboring RNC.
inter-Iur intra-frequency
EDCH_2SF4_SUPPORT(E-
This command is Value Range: OFFSET1,
RAN16.0 and Use this command
handover or inter- to
DCH max SF support 2SF4
applicable to the OFFSET2
later add a UMTS
frequency cell under
handover. indicator),
scenarios such as the Unit: None
the neighboring RNC. EDCH_SF4_SUPPORT(E-
inter-Iur intra-frequency
This command is Value
DCH maxRange: None, STTD,
SF support SF4
RAN16.0 and Use this command
handover or inter- to
applicable to the CP1
indicator),
later add a UMTS
frequency cell under
handover.
scenarios such as the Unit: None
EDCH_SF8_SUPPORT(E-
the neighboring RNC.
inter-Iur intra-frequency
DCH max SF support SF8
This command is
RAN16.0 and Use this command
handover or inter- to
Value Range: None, STTD
indicator),
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
EDCH_HARQ_IR_COMBIN_S
scenarios such as the
the neighboring RNC.
UPPORT(E-DCH support
inter-Iur intra-frequency
This command is Value Range: None, STTD,
RAN16.0 and Use this command
handover HARQ IR Combining indicator),
or inter- to
applicable to the CP1
later add a UMTS
frequency EDCH_HARQ_CHASE_COMB
cell under
handover.
scenarios such as the Unit: None
IN_SUPPORT(E-DCH support
the neighboring RNC.
inter-Iur intra-frequency
HARQ CHASE Combining
This command is
RAN16.0 and Use this command
handover or inter- to
Value Range: None, STTD
applicable to the indicator),
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the CPC_DTX_DRX_SUPPORT(C
the neighboring RNC.
PC DTX-DRX support
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to
indicator),
Value Range: None, STTD
applicable to the
later add a UMTS
frequency cell under
handover. CPC_HS_SCCH_LESS_OPER
Unit: None
scenarios such as the
the neighboring RNC. _SUPPORT(CPC HS-SCCH
inter-Iur intra-frequency
This command is less operation support
RAN16.0 and Use this command
handover or inter- to
applicable to the indicator),
later add a UMTS
frequency cell under
handover.
scenarios such as the HSPAPLUS_MIMO_SUPPOR
the neighboring RNC.
inter-Iur intra-frequency
T(MIMO support indicator),
This command is Value Range: FORBIDDEN,
RAN16.0 and Use this command
handover or inter- to
FLEX_MACD_PDU_SIZE_SU
applicable to the NOT_FORBIDDEN
later add a UMTS
frequency cell under
handover. PPORT(flexible MAC-d PDU
scenarios such as the Unit: None
the neighboring RNC. Size support indicator),
inter-Iur intra-frequency
This command is Value Range: Mode0, Mode1
FDPCH_SLOT_FORMAT_SU
RAN16.0 and Use this command
handover or inter- to
applicable to the Default Value: Mode0
PPORT(F-DPCH slot format
later add a UMTS
frequency cell under
handover.
scenarios such as the Unit: None
support indicator),
the neighboring RNC.
inter-Iur intra-frequency
HSPAPLUS_DL_64QAM_SUP
This command is
RAN16.0 and handover or inter- Value Range: -20
PORT(downlink to 20
64QAM
applicable to the
later frequency handover. Unit: 0.5dB
support indicator)
scenarios such as the
Default Value:
inter-Iur intra-frequency
handover or inter- DELAY_ACTIVATION_SUPPO
frequency handover. RT-0&HSDSCH_SUPPORT-
0&FDPCH_SUPPORT-
0&EDCH_SUPPORT-
0&EDCH_2MS_TTI_SUPPOR
08/24/2023 华为保密信息,未经授权禁止扩散
T- 第99页，共633页
0&EDCH_2SF2_AND_2SF4_S
UPPORT-
0&EDCH_2SF2_SUPPORT-
 Use this command to 686970386.xls 文档密级
add a UMTS cell under
the neighboring RNC.
This command is Value Range: FALSE, TRUE
RAN16.0 and Use this command to
applicable to the Default value: FALSE
later add a UMTS cell under
scenarios such as the Unit: None
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and Use this command
handover or inter- to Value Range: FALSE, TRUE
applicable to the
later add a UMTS
frequency cell under
handover. Unit: None
scenarios such as the
the neighboring RNC.
inter-Iur intra-frequency
This command is
RAN16.0 and handover or inter- Value Range: FALSE, TRUE
applicable to the
later frequency handover. Unit: None
scenarios such as the
Use this intra-frequency
inter-Iur command to
RAN16.0 and remove
handover anorintra-
inter- GUI Value Range: 0 to 4095
later frequency neighboring
handover. Unit: None
cell.
Use this command to
RAN16.0 and remove an intra- GUI Value Range: 0 to 65535
later frequency neighboring Unit: None
cell.
Use this command to
RAN16.0 and remove an intra- GUI Value Range: 0 to 65535
later frequency neighboring Unit: None
cell.
Use this command to
RAN16.0 and remove an intra- GUI Value Range: 0 to 65535
later frequency neighboring Unit: None
cell.
Use this command to
RAN16.0 and modify the information GUI Value Range: 0 to 4095
later about an intra-frequency Unit: None
neighboring cell.
Use this command to
RAN16.0 and modify the information GUI Value Range: 0 to 65535
later about an intra-frequency Unit: None
neighboring cell.
Use this command to
RAN16.0 and modify the information GUI Value Range: 0 to 65535
later about an intra-frequency Unit: None
neighboring cell.
Use this command to
RAN16.0 and modify the information GUI Value Range: 0 to 65535
later about an intra-frequency Unit: None
neighboring cell.
Use this command to
RAN16.0 and modify the information Value Range: FALSE, TRUE
later about an intra-frequency Unit: None
neighboring cell.
Use this command to
RAN16.0 and modify the information Value Range: 0 to 30
later about an intra-frequency Unit: None
neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第100页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
Range-value parameters
algorithm requirements (User
and the defined
value
priority):
range of include the parameters
each parameter for
on the MAE
which theonMAE
client or NEs.calculates optimization
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
requirements and the value range of
each parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第101页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
Range-value parameters
algorithm requirements and(User
the defined
value
priority):
range of include the parameters
each parameter for
on the MAE
which theonMAE
client or NEs.calculates optimization
values according to algorithm
Fixed-value parameters: includes the
requirements and the value range of
parameters for which the MAE provides
each parameter on the MAE client or on
built-in default values that cannot be
NEs.
modified by users. The MAE delivers the
Identity-related parameters:
fixed values of these parametersinclude
based
parameters
on the objectssuchthatasare
CellId, IDTYPE,
filtered according
MCC, and the
to algorithm MOC primary key and
requirements.
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
Range-value parameters
algorithm requirements and(User
the defined
value
priority):
range of include the parameters
each parameter for
on the MAE
which theonMAE
client or NEs.calculates optimization
values according to algorithm
Range-value
requirements parameters:
and the value include
range the
of
parameters
each parameterfor which
on thetheMAEMAE calculates
client or on
optimization
NEs. values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第102页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
Range-value parameters
algorithm requirements (User
and the defined
value
priority):
range of include the parameters
each parameter for
on the MAE
which theonMAE
client or NEs.calculates optimization
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
requirements and the value range of
each parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第103页，共633页

 686970386.xls 文档密级
Range-value parameters (User defined
priority): include the parameters for
which the MAE calculates optimization
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
Fixed-value parameters:
values according include the
to algorithm
parameters
requirements forand
whichthe the
valueMAE provides
range of
built-in default values
each parameter on thethat
MAE areclient
displayed
or on
on
NEs.the MAE client and can be modified
Range-value
by users. Theparameters
MAE delivers (User
the defined
fixed
priority):
values ofinclude the parameters
these parameters based foron the
which
objectsthe
thatMAE
are calculates optimization
filtered according to
values
algorithmaccording to algorithm
requirements.
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
requirements and the value range of
each parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第104页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
Range-value
by users. Theparameters
MAE delivers (User
the defined
fixed
priority):
values ofinclude the parameters
these parameters based foron the
which
objectsthe
thatMAE
are calculates optimization
filtered according to
values
algorithmaccording to algorithm
requirements.
Range-value parameters (User defined
requirements and the value range of
priority): include the parameters for
each parameter on the MAE client or on
which the MAE calculates optimization
NEs.
values according to algorithm
Identity-related
requirements and parameters: includeof
the value range
parameters
each parameter suchonasthe
CellId,
MAEIDTYPE,
client or on
MCC,
NEs. and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第105页，共633页

 cell.

This parameter
686970386.xls works with CIO. The 文档密级
sum of CIOOffset,
CIO, and the actual
measured value are
MML used Parameter
for UE event
Optimization Type Parameter NE
Command evaluation
Description or
decisions on
Periodic addition of missing handovers triggered
ADD
neighboring cells / Quick ID
by oftheanRNC. RNCIn a
UINTERFREQ RNCId RNC
addition of missing handover algorithm,
NCELL
neighboring cells Whether
this parameter to send is the
Periodic addition of missing
ADD system
neighboring cells / Quick used
Unique forinformation
IDmoving
of a cell the
UINTERFREQ CellId block
border11 of(SIB11)
a cell. RNC
addition of missing
NCELL carrying the
neighboring cells
Periodic addition of missing neighboring cell
ADD In the case
Unique RNC of anof a
ID
neighboring cells / Quick information.
UINTERFREQ NCellRncId neighboring For
event-based intra-
cell RNC
addition of missing Cell
details offsetabout used SIB11,for
NCELL frequency
neighboring cells CPICH
see 3GPP RSCP TS or
Periodic addition of missing measurement
ADD Unique
measurement ID of avalue
neighboring cells / Quick 25.331.
inter-RAT If this
UINTERFREQ NCellId neighboring
in cell selection cell or RNC
addition of missing parameter
measurement,
Cell offset used is setthe to
for
NCELL reselection
neighboring cells FALSE,
UE
CPICH determinesthewhen the
Ec/No
Periodic addition of missing Offset
UE is inofconnected
the
ADD neighboring
whether
measurement to trigger value an
neighboring cells / Quick measured
mode. CPICH
UINTERFREQ CIOOffset information
event according
in cell selection is not orto RNC
addition of missing RSCP used for cell
NCELL included
the sum of
Whether in
to SIB11.
send the In
neighboring cells reselection
During cellthe when
selection the
Periodic addition of missing this
SIB12 case,
CIOOffset, CIO,
connected and
ADD UE
or is incarrying
reselection,idle mode. the
neighboring cells / Quick Offset
neighboring
the
mode. actual of the cell
measured
UINTERFREQ SIB11Ind neighboring cell RNC
addition of missing QOffset1sn
measured
cannot
value. serve
The UE isas
CPICH thethe
NCELL information.
In a cell reselection Fordoes
neighboring cells cell
Ec/No
target
not offsetused
cell
consider for for cell
access
the
Periodic addition of missing During about
details
procedure, cell selection
theSIB12,
RNC
ADD corresponding
reselection
or cell
value ofreselection
this when to the
by
neighboring cells / Quick or
seereselection,
3GPPthis
subtracts TS offset
UINTERFREQ IdleQoffset1sn CPICH
UE
a UE is in
parameter inRSCP,
idlewhen
idle mode.
mode. and If RNC
addition of missing QOffset1sn
25.331.
from theIfmeasured
this is the
NCELL QOffset2sn
this parameter
evaluating an is inter-
the
is set
neighboring cells cell
CPICH offset
parameter RSCP is setof to a
Periodic addition of missing cell
In
to a offset
cell reselection
TRUE,
frequency the
ADD corresponding
FALSE,
neighboring the celltoand
neighboring cells / Quick corresponding
procedure,
neighboring
measurement to
theevent.
RNC
UINTERFREQ IdleQoffset2sn CPICH
neighboring
then ranksRSCP, all For and RNC
addition of missing CPICH
subtracts
information Ec/No.
this is offset
NCELL QOffset2sn is
information
neighboring is the
not
cells.
neighboring cells details
from
included the about
measured
in
Periodic addition of missing In
cellthe
included
For
case
offset
details, in SIB11.
of a In
SIB12.
see If
ADD QOffset1sn
CPICH
this case,
periodical Ec/No the and
inter- of a
neighboring cells / Quick corresponding
this
3GPP parameter
TS 25.304. to
is set
UINTERFREQ SIB12Ind QOffset2sn,
neighboring
frequency see and
cell can RNC
addition of missing CPICH
to TRUE, Ec/No.the For
NCELL 3GPP
then
serve
measurementasTSthe
ranks 25.331.
all target
or
neighboring cells details
neighboring about
Periodic addition of missing neighboring
cell for access cells.
ADD inter-RAT
QOffset1sn
information andor cell
is
neighboring cells / Quick QOffset1sn
reselection
measurement, byand athe UE
UINTERFREQ ConnQoffset1sn QOffset2sn,
included in SIB12. see In RNC
addition of missing QOffset2sn
in
RNC idle mode.
determines are used
NCELL 3GPP
this case, TS the 25.331.
neighboring cells Penalty
when
whether thetime
toUE for
is in
initiate
Periodic addition of missing neighboring
hierarchical cell is a
cell
ADD idle mode,based
handover while
neighboring cells / Quick QOffset1sn
preferentially and on
UINTERFREQ ConnQoffset2sn reselection
ConnQoffset1sn
the sum of after aand RNC
addition of missing Cell offsetasused
QOffset2sn
selected are
the for
used
NCELL Priority
UE
ConnQoffset2sn
CIOOffset, of aCIO,
reselects a and are
neighboring cells CPICH
when
target theRSCP
cell UEfor is in
access
Periodic addition of missing neighboring
hierarchical
used
the whenmeasured
actual thecellUE
cell. The is
ADD measurement
idle mode, while value
neighboring cells / Quick TpenaltyHcsRese or cell
during
hierarchical
in connected
value.
reselection
coverage- cell
mode.
by
UINTERFREQ in hierarchical
ConnQoffset1sn
the UE in connected celland RNC
addition of missing lect based
Cell
reselection inter-
offset
ConnQoffset1sn used
function for
and
NCELL selection
ConnQoffset2sn
mode(not or
include are
neighboring cells frequency
CPICH
enables
ConnQoffset2snEc/No
a UE in idle
are
Periodic addition of missing Whether
reselection.
used
CELL_DCH).when a the UE is
ADD handovers.
measurement
mode to reselect value
neighboring cells / Quick valid only
neighboring
in connectedcell
if the
mode. isa a
UINTERFREQ TempOffset1 in hierarchical
hierarchical
SIB12 message cell
cellfor in
is RNC
addition of missing candidate
If this parameter
ConnQoffset1sn cell is
and
NCELL Value
selection
the 0 indicates
network.
available. or
The
neighboring cells blind
set tohandovers.
INFINITY, aare
ConnQoffset2sn
Periodic addition of missing that the cellvalue
reselection.
measured doesofnot
ADD neighboring
valid only if the cell is
neighboring cells / Quick support
the coverage-
neighboring cell
UINTERFREQ TempOffset2 Value
not
SIB12 FALSE
selected
message as the is RNC
addition of missing based
If inter-
this parameter
minus the value is
NCELL indicates
target
available. cell.that
The theof
neighboring cells frequency
set
this to INFINITY,is a
parameter
Periodic addition of missing neighboring
measured valuecell is of1
ADD handovers.for cellValue
neighboring
used cell is
neighboring cells / Quick not
the considered
neighboring ascell a
UINTERFREQ HOCovPrio indicates
not selected
reselection that as the
ranking. the RNC
addition of missing candidate
minus the cell
value forof
NCELL cell
target
This has the highest
cell.
parameter
neighboring cells blind
this handovers.
parameter is
Periodic addition of missing priority
needs forbe
to coverage-
set
ADD Therefore,
used for cell blind
neighboring cells / Quick based inter- on the actual
UINTERFREQ BlindHoFlag handovers
reselection to this
ranking. RNC
addition of missing frequency
situation.
NCELL cell cannot
This parameter be
neighboring cells handovers. Value 3
triggered.
needs Value
indicates thatset
to be the
TRUE
based indicates that
cell hasonthe thelowestactual
the cell is
situation.
priority for coverage-
considered as a
based inter-
candidate cell for
frequency
blind handovers and
08/24/2023 华为保密信息,未经授权禁止扩散 handovers.
blind handovers to 第106页，共633页
this cell can be
triggered.
 command.
one
RSCP to value
be of the
considered
current cellanexceeds asMBDR the
Priority
-UseOfHcs of a for the
measurement
the
cell. value of this
neighboring
inter-frequency cell. The
686970386.xls object.
parameter, the RNC 文档密级
smaller
neighboring the value
cell isof
initiates
Value 0a blind
indicates
Whether
this
set parameter,
to USED the cell
in the thethe
The
handover
highest value TRUE
to
priority switch and
supports
higher
ADD the
UCELLHCS the priority of
Periodic addition of missing indicates
the
value UE 15 that
toindicates
the inter-the or
ADD measure-based
a
ADDneighboring
UEXT3GCELL cell. If
neighboring cells / Quick BlindHOQualityC neighboring
frequency
the lowest cell
priority.
UINTERFREQ directed
NPrioFlag
command. retryof a RNC
addition of missing ondition priority
(MBDR)isalgorithm.
neighboring configured.
cell.
NCELL neighboring cell is
neighboring cells This
The threshold
Periodic addition of missing set tohigher
False,the
-AdjsQhcsSwitch the for
ADD When
applies
MBDR the to algorithm
load-
neighboring cells / Quick
UINTERFREQ NPrioFlag
The
the
of serving cellof
value
neighboring
neighboring
balancing-based
priority TRUE cell aset
ishas
cell RNC
addition of missing Indicates
cell,
the
to the
indicates
lowest
ONhandovers, whether
more
that
in the ADDand likely
the
priority.
NCELL combination
blind
the
cell signal
cell
supports quality
is delivered MBDR in
neighboring cells DRD
UCELLHCS Ec/No
Periodic addition of missing (controlled
directed
neighboring
as a retries
measurement bycells from isof
ADD and
If the
command.the
threshold total value
for
number
neighboring cells / Quick HO_MC_NCELL_C
low-frequency-band
guaranteed. If the
UINTERFREQ NPrio object.
FALSE Ifindicates
determining
neighboring multiple whether
cells RNC
addition of missing OMBINE_SWITCH)
cells to high-
parameters
NCELL neighboring
that
to
exceeds
If the the
performfirstcell32,
twothe cells
does
the blind not
neighboring cells is enabled
frequency-band
Qqualmin
meet the and the
and
handover
Periodic addition of missing support
handover.
RNC
conditions MBDR.
considers If the
areofmet this
ADD total
cells.
Qrxlevminnumber for the of
neighboring cells / Quick DRDEcN0Thresh quality
measured
parameter
but requirements,
AdjsQhcsSwitch Ec/No
as on a
UINTERFREQ Flag of a cell
neighboring cells to RNC
addition of missing hold neighboring
the
With RNCMBDR,
current
condition for cell
establishes
cellthe is is
NCELL for
which
all thethe
cells serving
in the cell
active
neighboring cells related
the
RNC service
greater
selecting to
selectsthan SIB11
in atheand
this
Periodic addition of missing set to
DRD(Direct OFF,
exceeds Qhcs
Retry
32, the
ADD SIB12
cell with
qualified
parameter,
neighboring
delivered are the set
neighboring
this tocell
highest
cells.
in SIB11
neighboring cells / Quick Decision)
RNC considers this
UINTERFREQ MBDRFlag different
MBDR
cell
can
That
and tois,set
be
SIB12 avalues
priority.
the up RAB
candidate
uses Iffrom
two RNC
addition of missing measurement
parameter as or of
one
NCELL those
or
for
cellmore
the
for
neighboring
Qhcs for
UE,
DRD.
in: for the
cells basedserving
have
cell with on
neighboring cells LDR(Load
conditions
Periodic addition of missing cell,
the
a this
same
traffic
high parameter
priorityMBDR
load isof the
ADD Reshuffling)
selecting the
neighboring cells / Quick should
priority,
current
preferentially
-The ADD bethe
cell set RNC
and to the
UINTERFREQ MBDRPrio measurement
neighboring
MinimumIfCPICH cells.is RNC
addition of missing "TRUE".
establishes
inter-frequency
measured. thethe
NCELL UCELLHCS
performed.
That is, a If this
neighboring cells RSCP
parameter
service
neighboring forin the cell
cells
Periodic addition of missing command
parameter
neighboring for
iscell inter-
set
cell to
with
ADD neighboring
InterNCellQualReqFl
with
and the
the highest on
neighboring cells / Quick frequency
TRUE,
a high the
priority cell is can
UINTERFREQ DrdOrLdrFlag cell
ag
Ec/Noisreselection.
set
measurement or to theTrue, largest The the RNC
addition of missing neighboring
be considered cells
NCELL preferentially
neighboring
values
RSCP.
results of
on cellascan
Qqualmin
channel
the
neighboring cells under
measurement
selected. the Ifsame a object
Periodic addition of missing be
and involved
quality of theininter-
Qrxlevmin cell
which
ADD RNC.
in the DRD cell is
neighboring
neighboring cells / Quick InterNCellQualRe sorting
are
When setthe
frequency for
throughMBDR- ADD
UINTERFREQ measurement
not configured with RNC
addition of missing qFlag reselection
UINTERFREQNCEL
based
neighboring measurement only
cells.
NCELL -The
algorithm
the ADDorflag,
priority LDRthe
neighboring cells when
MAE
L will
results itsshow
be CPICH
used andno
that
Periodic addition of missing UEXT3GCELL
measurement
lowest priority isthis
ADD RSCP
V100R016C10
broadcast
neighboring
GUI Value is above through
cell
Range:
neighboring cells / Quick command
algorithm.
assigned toforthis
If inter-
UINTERFREQ Qqualmin threshold.
MML
SIB11
meets
FALSE(Do andIf
Command
the this cell.
SIB12.
quality
not and RNC
addition of missing frequency
parameter is set to
NCELL parameter
Parameter
Otherwise,
requirements,
send), TRUE(Send) isthe set if to
the
neighboring cells neighboring
FALSE, the cellsis
cell
Periodic addition of missing the
values
MBDR same
Reference of valueofas
Qqualmin
priority
ADD Candidate
under
invalid. flag ofaa
a neighboring
neighboring cells / Quick Qrxlevmin
and
cell Qrxlevmin
is 0 and forthe the which
UINTERFREQ Qrxlevmin cell
RNC.
Hostsetready
type to a cell
of RNC
addition of missing serving
are
MBDR cell,
through ADD
NCELL accommodate
when the RNC UEs
node
neighboring cells Qrxlevmin
UCELLSELRESEL
measurement is not report
Periodic addition of missing handed
Qhcs
redundancy forover the featureby
ADD contained
will
is a be used
periodic in andSIB11
neighboring cells / Quick InterFreqAdjsQhc Source
CLB.
neighboring
is When
enabled. of this
cell
Ifthis
this is
UINTERFREQ Priority
or SIB12.
broadcast
measurement of In athrough report, RNC
addition of missing s neighboring
parameter
not delivered
parameter is cells.
is setset
in to
to
NCELL candidate
case,
SIB3
the RNC the
and UEcell
SIB4.
can forCell
select
neighboring cells When
TRUE,
SIB11 this
the
or parameter
SIB12current if
Periodic addition of missing SINGLEHOST,
inter-frequency
extracts
reselection
this cell the
as is
the the
target
ADD is
cellsetis
UseOfHcs to
listed USER, foronthe a by
neighboring cells / Quick cell is
forcontrolled
handovers
Qrxlevmin
performed
cell blind triggered
from
only
UINTERFREQ CLBFlag neighboring
candidate
serving
only one cell cell cells
or list are RNC
addition of missing by
SIB3.
when CLB.
handovers.
configured For0RNC.
the and 15
details,
signal
by
If this
users.
NCELL during
neighboring
parameter an inter-
is cell
set to is
neighboring cells indicate
see
quality 3GPP inthe the TS highest
Periodic addition of missing When
frequency
set this
to NOT_USED.
DOUBLE_HOST, parameter
handover
ADD and
25.331.
expectedlowest Qrxlevminpriorities,
neighboring cells / Quick is
theset
triggered
cell toisSONOPTI,
by CLB.
UINTERFREQ CLBPrio respectively.
should
neighboring
neighboring be controlled
setcellDuring
cellsto is aare RNC
addition of missing When
If
by this
AdjsQhcsSwitch
two RNCs parameter
NCELL such
proper
above a Qqualmin
handover,
value, to anda
neighboring cells configured
is
for set
thetoserving
including FALSE,
SRNC.by the cell the
If is
Periodic addition of missing neighboring
match
Qrxlevmin. Qqualmin. cell with
ADD SON
current
set to feature
ON celland isbased
not
theon
neighboring cells / Quick this
a parameter
higher priorityisisset
UINTERFREQ UinterNcellSRC on
the the
list.
neighboring optimization cell is a RNC
addition of missing to
more likely to be on
NCELL results.
hierarchical When cell, this this
neighboring cells DOUBLE_HOST_O
the candidate cell
Periodic addition of missing parameter isthe set
used toin
UT_POOL,
list. cell
neighboring cells / Quick ADD Identifying
SONMEAS,
the following a formula
NRncId is controlled by two RNC
addition of missing UEXT3GCELL Neighboring
neighboring
to calculate RNC.
cells
the cell are
RNCs excluding
neighboring cells configured
quality: during
Periodic addition of missing SRNC. When the
Uniquely
the optimization identifying
neighboring cells / Quick ADD primary RNC is of
CellId a
the
H neighboring
= SON
Qmeas feature,- RNC RNC
addition of missing UEXT3GCELL faulty, the cell is
cell.
which helps detect
InterFreqAdjsQhcs
neighboring cells controlled by the
Periodic addition of missing missing neighboring
secondary RNC.
neighboring cells / Quick ADD cells.
If AdjsQhcsSwitch
CellHostType RNC
addition of missing UEXT3GCELL for
An theRNC serving
pool iscell is
neighboring cells set to OFF of and the
composed
neighboring
NodeBs, primary cell is a
hierarchical
RNC, and secondary cell,
Qhcs
RNC. is The used host in typethe
following
for RNCs is formula to
calculate
configuredcell onquality:
the
08/24/2023 华为保密信息,未经授权禁止扩散
NodeB side. The 第107页，共633页
H
RNC= Qmeas
node - Qhcs
redundancy feature
where
is introduced to
 9938]
Band4: UL
frequency = DL
Special frequencies
frequency - 300
686970386.xls {412, 437, 462, 487, 文档密级
512, 537, 562, 587,
Band5: UL
612, 637, 662, 687}
frequency = DL
Periodic addition of missing frequency - 225
neighboring cells / Quick ADD Band3
Identifying a cell
CellName RNC
addition of missing UEXT3GCELL name.
Band6: UL
neighboring cells Common
Periodic addition of missing frequency = DL
frequencies
Index of the [1162-
operator
neighboring cells / Quick ADD frequency - 225
CnOpGrpIndex 1513]
group that serves a RNC
addition of missing UEXT3GCELL
cell.
Band7: UL
This parameter
neighboring cells Special frequencies
Periodic addition of missing frequency = DL to
indicates whether
neighboring cells / Quick ADD none
Primary downlink
PScrambCode frequency
configure the - 225UL RNC
addition of missing UEXT3GCELL scrambling code.
frequency of the cell.
neighboring cells Band4
This parameter
Periodic addition of missing Depending
TRUE indicates on the that
specifies the
neighboring cells / Quick ADD value
the ULoffrequency
[BandId], as
BandInd Common
selected frequency RNC
addition of missing UEXT3GCELL shown
need bebelow:
frequencies
bands during[1537- cell
neighboring cells reconfigured. FALSE
Periodic addition of missing 1738]
setup.
Band1
indicates that the UL
neighboring cells / Quick ADD UARFCNUplinkIn
frequency need not RNC
addition of missing UEXT3GCELL d Special frequencies
Common
be reconfigured. It is
neighboring cells {1887, 1912, 1937,
Periodic addition of missing frequencies
configured [9612-
1962, 1987, 2012,
neighboring cells / Quick ADD 9888]
automatically based
UARFCNUplink 2037, 2062, 2087} RNC
addition of missing UEXT3GCELL on the relationship
neighboring cells Whether
Special
between to activate
frequencies
UL and DL
Periodic addition of missing Band5
the
none transmit diversity
frequencies. NULL
neighboring cells / Quick ADD UARFCNDownlin
mode
indicates for common
that the UL RNC
addition of missing UEXT3GCELL k Common
channels
ID inremains
of a secondary
Band2
frequency a cell.
neighboring cells frequencies [4357-
Periodic addition of missing RNC.
unchanged.
4458]
neighboring cells / Quick ADD Transmit
Common diversity
SlaveNRncId RNC
addition of missing UEXT3GCELL enables
Secondary
frequencies theRNCtransmit
[9262- is a
Special frequencies
neighboring cells end to use two
redundancy
9538] for orthe
Periodic addition of missing {1007, 1012, 1032,
more
primary antennas
RNC. for
neighboring cells / Quick ADD 1037, 1062, 1087}
TxDiversityInd transmitting
Special signals.
frequencies RNC
addition of missing UEXT3GCELL This parameter
Each
{12, 37,antenna
62, 87, is112,
neighboring cells identifies whether
Band6 to
Periodic addition of missing assigned
137, 162, different
configure
This parameter RAC.212,
187, If the
neighboring cells / Quick ADD weight
237, 262,coefficients,
LAC RNC
identifies
Common a287}
supports the
location RNC
addition of missing UEXT3GCELL such as amplitude
PS
areadomain,
code. this
frequencies [4387-
neighboring cells and
Band3 phase, to
Periodic addition of missing parameter
4413] must be
improve
Default the offset
time
neighboring cells / Quick ADD set to REQUIRE.
CfgRacInd reception
Common RNC
addition of missing UEXT3GCELL used forfrequencies
Special activating a
performance
frequencies
new configuration of theif
[937-
neighboring cells Value
{1037, Range:
1062}
Periodic addition of missing receive
1288] end.
the
This reconfigured
parameter
NOT_REQUIRE(Not RL
neighboring cells / Quick ADD Time
Default that
timecanoffset
be
RAC transmits
indicates
configure
Band7 signaling
the
RAC routing RNC
addition of missing UEXT3GCELL taken
used
Special byfrequencies
for the NodeBa
activating
at a rate
area code.
information), of 13.6
neighboring cells to
newprocess
none an NBAP
configuration if
Periodic addition of missing kbit/s.
REQUIRE(Configure
Common
RADIO LINK
the reconfigured RL
neighboring cells / Quick ADD MidRateRlActTim RAC information)
frequencies [2237-
RECONFIGURATIO
transmits
Band4 signaling RNC
addition of missing UEXT3GCELL eDefOffVal Time
This
2563] that can beis an
parameter
N
at COMMIT
a rate of 27.2
neighboring cells taken
advanced by the NodeB
Periodic addition of missing message
kbit/s.
Common during a
to process
parameter.
Special an
ToNBAP
frequencies
neighboring cells / Quick ADD HighRateRlActTi reconfiguration
frequencies if the
RADIO2612,
modify
{2587, LINK[1312-
this 2637, RNC
addition of missing UEXT3GCELL meDefOffVal Time
This
1513] that canRL
reconfigured
parameter beis an
RECONFIGURATIO
parameter,
2662, 2687, contact
2712,
neighboring cells taken
transmits
advanced by the NodeB
signaling
Periodic addition of missing N COMMIT
Huawei
2737, Customer
2762, 2787,
to
at process an
a ratefrequencies
parameter.
Special of 3.4
To NBAP
kbit/s
neighboring cells / Quick ADD OamGuardValFor message
Service
2812, during
Center
2837, 2862,fora
RADIO
or 6.8
modify
{1662, LINK
kbit/s.
this
1687, 1712, RNC
addition of missing UEXT3GCELL LowRate reconfiguration
technical
2887, 2912}support. if the
RECONFIGURATIO
parameter,
1737, 1762,contact
1787,
neighboring cells reconfigured RL
Periodic addition of missing N COMMIT
This
Huawei
1812, parameter
Customer
1837, 1862} is an
transmits
Band8 signaling
neighboring cells / Quick ADD OamGuardValFor message
advanced
Service Center duringfor a
at a rate of 13.6 RNC
addition of missing UEXT3GCELL MidRate reconfiguration
parameter.
technical
Band5 To if the
support.
kbit/s.
Common
neighboring cells reconfigured
modify this RL
Periodic addition of missing frequencies [2937-
transmits
parameter, signaling
contact
neighboring cells / Quick ADD OamGuardValFor Common
This parameter is an
3088]
at a rateCustomer
Huawei
frequencies of 27.2 RNC
addition of missing UEXT3GCELL HighRate advanced [4132-
kbit/s.
Service
4233] Center for
neighboring cells parameter.
Special To
technicalfrequencies
support.
modify
none this
This
Specialparameter
frequencies is an
parameter, contact
advanced
{782, 787, 807, 812,
Huawei
Band9 Customer
parameter.
837, 862} To
Service Center for
modify this
technical
Common support.
parameter,
Band6 contact
08/24/2023 华为保密信息,未经授权禁止扩散 frequencies
Huawei Customer [9237- 第108页，共633页
9387]
Service
CommonCenter for
technical
frequencies support.
[4162-
Special frequencies
 Qrxlevmeas -
activating
Qrxlevmin a- new
configuration
Pcompensation during
a hard handover if
Time offset used for
686970386.xls the-activating reconfigured
Qqualmeas a new is the RL 文档密级
transmits
measured signaling
cellduring
configuration
Default
at a rate time
of 3.4 offsetkbit/s
quality
a hard handover value, if
Periodic addition of missing used
or 6.8 for
kbit/sactivating a
namely
the reconfigured CPICH no and
RL
neighboring cells / Quick ADD ActTimeDefOffVal new
HSPA
Ec/No.
configuration
service exists. for
transmits signaling RNC
addition of missing UEXT3GCELL ForUncellNoH a reconfiguration
This
at a rate parameter of 3.4 kbit/s
neighboring cells performed
This parameter withinisthe an
Periodic addition of missing -indicates
orQrxlevmeas
6.8 kbit/s whether
and is theanto
same
advanced cell if the
neighboring cells / Quick ADD ActTimeDefOffVal measured
configure
HSPA service cell exists.
the RX
reconfigured
parameter. To radio RNC
addition of missing UEXT3GCELL ForUncellH level
minimum value, namely
quality
link
modify transmits
this
neighboring cells CPICH
level.
This parameter WhenRSCP. it isisset an
Periodic addition of missing signaling
parameter, at contact
a rate of
to
advancedFALSE, the UE
neighboring cells / Quick ADD ActTimeDefOffVal 3.4
Huawei kbit/sCustomer or 6.8
-adopts
Qrxlevmin
parameter. the To is the RNC
addition of missing UEXT3GCELL ForSameCell kbit/s.
Service Center for
minimum
modify thisrequired
corresponding value
neighboring cells technical
Minimum support.
required
Periodic addition of missing quality
of level
the current
parameter, in the
Whether
This parameter to contact
configure is an
neighboring cells / Quick ADD RX
cell.
serving
Huawei threshold cell,
Customer added
QqualminInd the
advanced minimum receive RNC
addition of missing UEXT3GCELL corresponding
through
Service the ADD to the
level for Center
parameter. a cell.To If
for
this
neighboring cells CPICH
-UCELLSELRESEL
Pcompensation
technical RSCP.support. A UE =
Periodic addition of missing parameter
modify thison is set to
can camp
max(UE_TXPWR_M
command. This a cell
neighboring cells / Quick ADD FALSE,
parameter, thecontact
UE uses
Qqualmin only if the measured
AX_RACH-P_MAX,
parameter RNC
addition of missing UEXT3GCELL Whether
the
Huawei valueCustomer aofis
cell
this
CPICH
0)
generally RSCP set tois
neighboring cells supports
parameter
Service the
Centerset infor
Periodic addition of missing greater
FALSE. than theit is
minimumWhen
ADD
technical receive
support.
neighboring cells / Quick ADD Extended
value
-set to of TRUE,thisvalue thefor UE
QrxlevminInd level extension
UCELLSELRESEL RNC
addition of missing UEXT3GCELL the minimum
parameter.
UE_TXPWR_MAX_
adopts the valuereceive in
function.
for theThe cell.actualIn
neighboring cells level.
RACH
ADD UEXT3GCELL is the
Periodic addition of missing normal cases, this
minimum
Setting
maximum
command. this receive
TX power
neighboring cells / Quick ADD The minimum
parameter is set to
Qrxlevmin level
parameter is
a UE equal based
may to usetheon RNC
addition of missing UEXT3GCELL receive
FALSE. level
This
sum
the
when ofaccessing
setting Qrxlevminof the
neighboring cells extension function
parameter affects
Periodic addition of missing and
Qqualmin.
cell DeltaQrxlevmin.
on RACH,
refers
the celltocampingthat the
neighboring cells / Quick ADD
QrxlevminExtSup namelysum of Qrxlevmin
success rate of UEs RNC
addition of missing UEXT3GCELL The
If thisminimum
parameter is
MaxAllowedULTxPo
This
and
in idle parameter
DeltaQrxlevmin
mode.
neighboring cells receive
not
wer. set, level the UE uses
Periodic addition of missing indicates
is used aswhether
the actual to
This
extension
the parameter
value function
of
neighboring cells / Quick ADD configure
minimum the
receive
DeltaQrxlevmin specifies
refers
Qrxlevmin
-level
P_MAX to thattheset thein RNC
addition of missing UEXT3GCELL maximum whenisTX the
the power.
value
maximum
sum
ADD of Qrxlevmin allowed
RF output
neighboring cells of Qrxlevmin is less
Periodic addition of missing uplink
and TX
DeltaQrxlevmin
UCELLSELRESEL
power of the power UE.of a
GUI
thaninValue
-115 Range:
dBm.
neighboring cells / Quick ADD MaxAllowedUlTx UE is
for used
the the ascell.
cell. the When
actual
Usually,
TRUE(Configure the RNC
addition of missing UEXT3GCELL PowerInd this
minimum
As parameter
for the receive
impact is not
on
maximum
For details uplink
about the this
neighboring cells set
level
set. to
network any value,
when the value
Periodic addition of missing power
parameter, of UE), see
UE adopts the
of Qrxlevmin is less
neighboring cells / Quick ADD MaxAllowedUlTx performance:
Whether
FALSE(Not
3GPP TS a25.331.
cell uses
corresponding
than -115 dBm.value RNC
addition of missing UEXT3GCELL Power HCS.
configure the
of
The the current
larger the value
neighboring cells maximum uplink
Periodic addition of missing serving
For
of thedetails cell,about
parameter added this
is,
HCS
In a HCS
power priority
of UE) of the
network,
neighboring cells / Quick ADD through
parameter,
the more the ADD it is
see
difficult
UseOfHcs cell
macro belongscells provideto. Set a RNC
addition of missing UEXT3GCELL UCELLSELRESEL
3GPP
for the TS
UE25.331.tocoverage
camp
high HCS
continuous priority for
neighboring cells command.
on the cell. The
Periodic addition of missing a
andcellmicroif thecells cell
Generally,
smaller this of
neighboring cells / Quick ADD provide the
coverage is value
hotspot small.
HCSPrio parameter
the parameter is not set RNC
addition of missing UEXT3GCELL The value 0 is, the
coverage.
to any itvalue.
easier istheforlowest
the UE
neighboring cells indicates
Periodic addition of missing Whether
to to support
HCS priority andcell.
camp on the 7
neighboring cells / Quick ADD the mode
Quality
However, change
threshold
if the of
for
Qhcs indicates the highest RNC
addition of missing UEXT3GCELL downlink
HCS power
reselection.
valuepriority.
is excessively
HCS
neighboring cells control.
small, it Downlink
is possible
Periodic addition of missing
power
that the control
UE cannot
neighboring cells / Quick ADD SuppDpcmodeCh
includes
receive theslow systempower RNC
addition of missing UEXT3GCELL gFlag
control and
messagesforcarried fast
neighboring cells Indicator closedby
Periodic addition of missing STTD
power
PCCPCH. indicator.
control. For This
loop TX diversity
neighboring cells / Quick ADD parameter
details about indicates
this
STTDSupInd mode 1. This RNC
addition of missing UEXT3GCELL whether
parameter,
When this a cell see
parameter
parameter indicates
neighboring cells supports
3GPP
is not TSSTTD.
set 25.433.
to any
Periodic addition of missing whether a cell
neighboring cells / Quick ADD value, theclosed
supports UE adopts loop
CP1SupInd the diversity
corresponding RNC
addition of missing UEXT3GCELL TX mode 1.
neighboring cells value
For details of theabout current
serving
closed loop TX cell, added
through
diversity mode 1,the ADD
UCELLSELRESEL
see 3GPP TS
command.
25.214.
Generally, this
08/24/2023 华为保密信息,未经授权禁止扩散 parameter is not set 第109页，共633页
to any value.
 2SF2+2SF4.

7)EDCH_2SF2_SUP
Adjustment offset for
686970386.xls PORT(E-DCH
closed loop TXmax 文档密级
SF support
diversity mode 2SF1.
indicator):
For remotewhen cells,the the
Periodic addition of missing indicator
recommended is TRUE, value it
neighboring cells / Quick ADD ClosedLoopTime means that
is OFFSET2. For the cell
Specifies
has theSF TX RNC
addition of missing UEXT3GCELL AdjustMode otherE-DCH
cells, the
diversity
Specifies
capability mode
the TX
of 2SF2. on F-
neighboring cells recommended value
Periodic addition of missing DPCH
diversity formode the non- on
is OFFSET1. For
neighboring cells / Quick ADD DpchDivModforOt MIMO
DPCH users
for
8)EDCH_2SF4_SUP the and
non-
details about this RNC
addition of missing UEXT3GCELL her non-DC-HSDPA
MIMO
PORT(E-DCH users and max
offset, see 3GPP TS
neighboring cells users.
non-DC-HSDPA
SF support 2SF4
Periodic addition of missing Specifies
25.214. the TX
users.
indicator):
diversity mode whenonthe F-
neighboring cells / Quick ADD FdpchDivModfor
According
indicator toTRUE,
3GPPit RNC
addition of missing UEXT3GCELL Other DPCH foristhe MIMO
TS
means25.211, the F-
neighboring cells users. that the cell
Periodic addition of missing Specifies
DPCH
Whether
has E-DCH can tothe SFTX
use
forbid
neighboring cells / Quick ADD DpchDivModforMI diversity
STTD
HSPA TX
UEsofon DPCH
diversity
capability
According tofrom
2SF4.
3GPP RNC
addition of missing UEXT3GCELL MO Specifies
mode for
only. the
the For TX
MIMO
performing
TS 25.211, inter- the F-
neighboring cells diversity
users.
details aboutmodethis for
Periodic addition of missing RNC
DPCHinter-frequency
9)EDCH_SF4_SUP
can use
the DC-HSDPA
parameter, see
neighboring cells / Quick ADD FdpchDivModfor or
STTDinter-RNC
PORT(E-DCHTX diversity intra-
max
users.
3GPP TS 25.211. RNC
addition of missing UEXT3GCELL MIMO frequency
SF
mode support
only. SF4 For
neighboring cells handovers
indicator):
details about when
when thisthethe
Periodic addition of missing According to 3GPP
function
indicator
parameter, isisenabled.
TRUE,
see it
neighboring cells / Quick ADD DivModforDCHS TS 25.211, the DC-
Whether
When
3GPP this
means that
TS to25.211.
enable
parameter
the cell RNC
addition of missing UEXT3GCELL DPA HSDPA feature can
HARQ
is
has topreamble.
setE-DCH NOT SF
neighboring cells use STTD TX
Periodic addition of missing When
FORBIDDEN,
capability
GUI Value thisof parameter
these
SF4.
Range:
diversity mode only.
neighboring cells / Quick ADD CellCapContainer is
UEs setare
None, toSTTD
0, HARQto
allowed
For details,is see RNC
addition of missing UEXT3GCELL Fdd preamble
perform suchnot
10)EDCH_SF8_SUP
3GPP
enabled. TSWhen 25.211. this
neighboring cells handovers.
PORT(E-DCH max
Periodic addition of missing
parameter
SF supportisthese
Otherwise, SF8set to
neighboring cells / Quick ADD OverLayMobilityFl
1,
UEs HARQare not
indicator): preamble
whenallowedthe RNC
addition of missing UEXT3GCELL ag Cell individual
is
to enabled.
perform
indicator is When it
such
TRUE,
neighboring cells offset(CIO) of a
Periodic addition of missing HARQ
handovers.
means preamble is
serving that cell,the whichcell is
neighboring cells / Quick ADD enabled,
has E-DCH HARQ SF
HarqPreaCap used with the CIO RNC
addition of missing UEXT3GCELL preamble
A UE processing
capability takes
of SF8.
offset of the
neighboring cells effect
HSPA+ only andonR99 CS
Periodic addition of missing neighboring cell. For
Access point
HARQ-preamble-
services
11)EDCH_HARQ_IR is not(AP) an
neighboring cells / Quick ADD details about this
CIO cell indicator.
enabled
HSPA UE.
_COMBIN_SUPPO UEs. When In RNC
addition of missing UEXT3GCELL parameter, see
the
E_FACHindicator
addition,
RT(E-DCH is
support
ACK, support
neighboring cells 3GPP TS 25.331
Periodic addition of missing "TRUE",
indicator.
NACK,
In
HARQa stack CQI,
IR itWhen
indicates
network,
Combining the
and description of
neighboring cells / Quick ADD that the
indicator
preamble,
cells under
indicator): cell
iswhenis an
TRUE,
and
the same APit
EFachSupInd CIOOffset in the the RNC
addition of missing UEXT3GCELL cell. APbelong
indicates
postamble
sector
indicator isis aTRUE,
that device
the
to it
ADD
neighboring cells for
cell accessing
supports
messages
different
means thethe
can
vendors
that be
cell
Periodic addition of missing UINTERFREQNCEL
UMTS
E_FACH.
carried
and
use IR wireless
over the
therefore
combine HS-
these
neighboring cells / Quick ADD L.
APFlag Indicates
network.
DPCCH.
cells
Modeare when whether
This
controlleddevice
MAC-e RNC
addition of missing UEXT3GCELL
the
by
PDUs videophone
integrates
different the
are receivedRNCs. (VP)
neighboring cells
Periodic addition of missing service
functions
more than is of limited
thetime
one in a
neighboring cells / Quick ADD cell.
NodeB When
in E-DCH. software the and
VPLimitInd RNC
addition of missing UEXT3GCELL indicator
parts of the is "TRUE",
functions
Periodic addition of missing
neighboring cells it
of indicates
the RNC that
12)EDCH_HARQ_C the
software.
neighboring cells / Quick
RMV VP
It is service
appliedistolimited
HASE_COMBIN_SU
addition of missing ID of an RNC
UINTERFREQ RNCId in the cell. and
households
PPORT(E-DCH RNC
neighboring cells /
Periodic addition of missing NCELL SOHO
supportusers. HARQ
Redundant neighboring
neighboring cells / Quick CHASE Combining
cells RMV
addition of missing Unique
indicator): ID whenof a cell the
UINTERFREQ CellId RNC
neighboring cells / indicator is TRUE, it
Periodic addition of missing NCELL
Redundant neighboring means that the cell
neighboring cells / Quick
cells RMV Unique
use CHASE RNC ID of a
addition of missing
UINTERFREQ NCellRncId neighboring
combine Mode cellwhen RNC
neighboring cells /
Periodic addition of missing NCELL MAC-e PDUs are
Redundant neighboring
neighboring cells / Quick received
cells RMV Unique IDmore of a than
addition of missing one
UINTERFREQ NCellId neighboringE-DCH.
time in cell RNC
neighboring cells /
NCELL
Redundant neighboring 13)CPC_DTX_DRX
cells _SUPPORT(CPC
DTX-DRX support
indicator): when the
indicator is TRUE, it
indicates that the
08/24/2023 华为保密信息,未经授权禁止扩散
cell supports CPC 第110页，共633页
DTX_DRX.

14)CPC_HS_SCCH
 The value FALSE
indicates that the
686970386.xls neighboring cell 文档密级
priority is not
configured. In the
algorithm of
MOD neighboring cell
ID of an RNC
Neighboring cell priority UINTERFREQ RNCId combination, the cell RNC
NCELL with an invalid
MOD priority is the last
Unique ID of a cell
Neighboring cell priority UINTERFREQ CellId one to be RNC
NCELL considered as the
Priority of a
measurement
MOD Unique
neighboringRNCcell.
ID ofThe
a
object.
Neighboring cell priority UINTERFREQ NCellRncId neighboring cell
smaller the value of RNC
NCELL this
The parameter,
value TRUEthe
MOD higher
Uniquethe
indicates priority
of athe of
that
ID
Neighboring cell priority UINTERFREQ NCellId a neighboring
neighboring cell. If
cell RNC
NCELL NPrioFlag of a
priority is configured.
neighboring cell is
MOD
set
When to False, the
the algorithm
Neighboring cell priority UINTERFREQ NPrioFlag RNC
neighboring
of neighboring cellcell
has
NCELL
the lowest priority.
combination
MOD (controlled by
Neighboring cell priority UINTERFREQ NPrio If the total number of
HO_MC_NCELL_C RNC
NCELL neighboring
OMBINE_SWITCH) cells
exceeds
is enabled 32, thethe
and
RNC considers
total number of this
parameter
neighboringascells a to
condition
all cells infor
the active
selecting
set exceeds 32, the
neighboring
RNC considers cells.
this
That is, a as one of
parameter
neighboring
conditions forcell with
a high priority
selecting the is
preferentially
neighboring cells.
measured.
That is, a
neighboring cell with
a high priority is
preferentially
selected. If a
neighboring cell is
not configured with
the priority flag, the
lowest priority is
assigned to this cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第111页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to add an inter-

GUI Value Range: 0 to 4095
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: -20 to 20
RAN16.0 and later frequency neighboring cell.
Unit: 0.5dB

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: -50 to 50
RAN16.0 and later frequency neighboring cell.
Unit: dB

Use this command to add an inter-

Value Range: -50 to 50
RAN16.0 and later frequency neighboring cell.
Unit: dB

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: -50 to 50
RAN16.0 and later frequency neighboring cell.
Unit: dB

Use this command to add an inter-

Value Range: -50 to 50
RAN16.0 and later frequency neighboring cell.
Unit: dB
Use this command to add an inter-
Value Range: D0, D10, D20,
frequency neighboring cell.
RAN16.0 and later D30, D40, D50, D60
Unit: s
Use this command to add an inter- Value Range: D3, D6, D9,
frequency neighboring cell. D12, D15, D18, D21,
RAN16.0 and later
INFINITY
Unit: dB
Use this command to add an inter- Value Range: D2, D3, D4,
RAN16.0 and later frequency neighboring cell. D6, D8, D10, D12, INFINITY
Unit: dB
Use this command to add an inter-
Value Range: 0 to 3
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第112页，共633页

 686970386.xls 文档密级

Use this command to add an inter-

Value Range: -115 to -25
RAN16.0 and later frequency neighboring cell.
Unit: dBm

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: 0 to 63
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: -24 to 0
RAN16.0 and later frequency neighboring cell.
Unit: dB

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: 0 to 15
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: -24 to 0
RAN16.0 and later frequency neighboring cell.
Unit: dB

Use this command to add an inter-

Value Range: -58 to -13
RAN16.0 and later frequency neighboring cell.
Unit: 2dBm

Use this command to add an inter-

Value Range: 0 to 99
RAN16.0 and later frequency neighboring cell.
Unit: dB; dBm

Use this command to add an inter-

Value Range: FALSE, TRUE
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Value Range: 0 to 15
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

Default Value: SONOPTI
RAN16.0 and later frequency neighboring cell.
Unit: None
Use this command to add a UMTS
cell under the neighboring RNC. This
command is applicable to the GUI Value Range: 0 to 65535
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the GUI Value Range: 0 to 65535
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS Value Range:
frequency handover or inter-
cell under the neighboring RNC. This SINGLE_HOST,
frequency handover.
command is applicable to the DOUBLE_HOST,
RAN16.0 and later
scenarios such as the inter-Iur intra- DOUBLE_HOST_OUT_POO
frequency handover or inter- L
frequency handover. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第113页，共633页

 686970386.xls 文档密级
Use this command to add a UMTS
cell under the neighboring RNC. This
GUI Value Range: 1 to 64
command is applicable to the
RAN16.0 and later characters
scenarios such as the inter-Iur intra-
Use this command to add a UMTS Unit: None
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 31
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 511
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter- Value Range: Band1, Band2,
cell under the neighboring RNC. This
frequency handover. Band3, Band4, Band5,
command is applicable to the
RAN16.0 and later Band6, Band7, Band8,
scenarios such as the inter-Iur intra-
Use this command to add a UMTS Band9, BandIndNotUsed
frequency handover or inter-
cell under the neighboring RNC. This Unit: None
frequency handover.
command is applicable to the Value Range: TRUE, FALSE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 16383
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 16383
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 4095
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: TRUE, FALSE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover. Value Range: 1 to 65533,
command is applicable to the
RAN16.0 and later 65535
scenarios such as the inter-Iur intra-
Use this command to add a UMTS Unit: None
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover. Value Range:
command is applicable to the
RAN16.0 and later NOT_REQUIRE, REQUIRE
scenarios such as the inter-Iur intra-
Use this command to add a UMTS Unit: None
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 1000
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: ms
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 1000
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: ms
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 1000
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: ms
frequency handover or inter-
frequency handover.

08/24/2023 华为保密信息,未经授权禁止扩散 第114页，共633页

 686970386.xls 文档密级
Use this command to add a UMTS
cell under the neighboring RNC. This
command is applicable to the Value Range: 1 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: 10ms
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 1 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: 10ms
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 1 to 255
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: 10ms
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: -24 to 0
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: dB
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: -58 to -13
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: 2dBm
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: -2 to -1
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: 2dBm
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: -50 to 33
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: dBm
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This Value Range: USED(HCS
frequency handover.
command is applicable to the cell), NOT_USED(Non HCS
RAN16.0 and later
scenarios such as the inter-Iur intra- cell)
Use this command to add a UMTS
frequency handover or inter- Unit: None
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 7
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: 0 to 99
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: dB; dBm
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This
frequency handover.
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS
frequency handover or inter-
cell under the neighboring RNC. This Value Range:
frequency handover.
command is applicable to the STTD_Supported,
RAN16.0 and later
scenarios such as the inter-Iur intra- STTD_not_Supported
Use this command to add a UMTS
frequency handover or inter- Unit: None
cell under the neighboring RNC. This Value Range:
frequency handover.
command is applicable to the CP1_Supported,
RAN16.0 and later
scenarios such as the inter-Iur intra- CP1_not_Supported
frequency handover or inter- Unit: None
frequency handover.

08/24/2023 华为保密信息,未经授权禁止扩散 第115页，共633页

 Value Range:
DELAY_ACTIVATION_SUPP
686970386.xls ORT(delay activation support 文档密级
indication),
Use this command to add a UMTS HSDSCH_SUPPORT(HSDS
cell under the neighboring RNC. This CH support indication),
Value Range: OFFSET1,
FDPCH_SUPPORT(F-DPCH
command is applicable to the
RAN16.0 and later OFFSET2
scenarios such as the inter-Iur intra- support indication),
Use this command to add a UMTS Unit: None
EDCH_SUPPORT(E-DCH
frequency handover or inter-
cell under the neighboring RNC. This support indication),
frequency handover. Value Range: None, STTD,
command is applicable to the EDCH_2MS_TTI_SUPPORT(
RAN16.0 and later CP1
scenarios such as the inter-Iur intra- E-DCH 2ms TTI support
Use this command to add a UMTS Unit: None
frequency handover or inter-
cell under the neighboring RNC. This indicator),
frequency handover. EDCH_2SF2_AND_2SF4_S
command is applicable to the Value Range: None, STTD
RAN16.0 and later
scenarios such as the inter-Iur intra- UPPORT(E-DCH
Unit: None max SF
Use this command to add a UMTS support 2SF2+2SF4
frequency handover or inter-
cell under the neighboring RNC. This indicator),
frequency handover. Value Range: None, STTD,
command is applicable to the EDCH_2SF2_SUPPORT(E-
RAN16.0 and later CP1
scenarios such as the inter-Iur intra- DCH max SF support 2SF2
Use this command to add a UMTS Unit: None
frequency handover or inter-
cell under the neighboring RNC. This indicator),
frequency handover. EDCH_2SF4_SUPPORT(E-
command is applicable to the Value Range: None, STTD
RAN16.0 and later
scenarios such as the inter-Iur intra- DCH max SF support 2SF4
Unit: None
Use this command to add a UMTS
frequency handover or inter- indicator),
cell under the neighboring RNC. This
frequency handover. EDCH_SF4_SUPPORT(E-
command is applicable to the Value Range: None, STTD
RAN16.0 and later DCH max SF support SF4
scenarios such as the inter-Iur intra- Unit: None
Use this command to add a UMTS indicator),
frequency handover or inter-
cell under the neighboring RNC. This EDCH_SF8_SUPPORT(E-
frequency handover.
command is applicable to the DCH max SF support SF8
RAN16.0 and later
scenarios such as the inter-Iur intra- indicator),
Use this command to add a UMTS
frequency handover or inter- EDCH_HARQ_IR_COMBIN_
cell under the neighboring RNC. This
frequency handover. Value Range: FORBIDDEN,
SUPPORT(E-DCH support
command is applicable to the
RAN16.0 and later NOT_FORBIDDEN
HARQ IR Combining
scenarios such as the inter-Iur intra-
Use this command to add a UMTS Unit: None
indicator),
frequency handover or inter-
cell under the neighboring RNC. This EDCH_HARQ_CHASE_COM
frequency handover.
command is applicable to the Value Range: Mode0, Mode1
BIN_SUPPORT(E-DCH
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
support HARQ CHASE
Use this command to add a UMTS
frequency handover or inter- Combining indicator),
cell under the neighboring RNC. This
frequency handover. CPC_DTX_DRX_SUPPORT(
command is applicable to the Value Range: -20 to 20
RAN16.0 and later
scenarios such as the inter-Iur intra- CPC DTX-DRX support
Unit: 0.5dB
Use this command to add a UMTS indicator),
frequency handover or inter-
cell under the neighboring RNC. This CPC_HS_SCCH_LESS_OPE
frequency handover.
command is applicable to the Value Range: FALSE,
R_SUPPORT(CPC HS-TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit:
SCCH None
less operation support
Use this command to add a UMTS
frequency handover or inter- indicator),
cell under the neighboring RNC. This
frequency handover. HSPAPLUS_MIMO_SUPPO
command is applicable to the Value Range: FALSE, TRUE
RAN16.0 and later
scenarios such as the inter-Iur intra- RT(MIMO
Unit: Nonesupport indicator),
Use this command to add a UMTS FLEX_MACD_PDU_SIZE_S
frequency handover or inter-
cell under the neighboring RNC. This UPPORT(flexible MAC-d
frequency handover.
command is applicable to the Value Range:
PDU Size FALSE,
support TRUE
indicator),
RAN16.0 and later
scenarios such as the inter-Iur intra- Unit: None
FDPCH_SLOT_FORMAT_S
frequency handover or inter- UPPORT(F-DPCH slot format
frequency handover. support indicator),
Use this command to remove an GUI Value Range: 0 to 4095
RAN16.0 and later HSPAPLUS_DL_64QAM_SU
inter-frequency neighboring cell. Unit: None
PPORT(downlink 64QAM
support indicator)
Use this command to remove an GUI
Unit:Value
None Range: 0 to 65535
RAN16.0 and later
inter-frequency neighboring cell. Unit: None

Use this command to remove an GUI Value Range: 0 to 65535

RAN16.0 and later
inter-frequency neighboring cell. Unit: None

Use this command to remove an GUI Value Range: 0 to 65535

RAN16.0 and later
inter-frequency neighboring cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第116页，共633页

 686970386.xls 文档密级

Use this command to add an inter-

GUI Value Range: 0 to 4095
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to add an inter-

GUI Value Range: 0 to 65535
RAN16.0 and later frequency neighboring cell.
Unit: None

Use this command to modify the

Value Range: FALSE, TRUE
RAN16.0 and later information about an inter-frequency
Unit: None
neighboring cell.
Use this command to modify the
Value Range: 0 to 30
RAN16.0 and later information about an inter-frequency
Unit: None
neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第117页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
Range-value parameters (User defined
range of each parameter on the MAE
priority): include the parameters for which
client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters: include the
the value range of each parameter on the
parameters for which the MAE calculates
MAE client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters (User defined
range of each parameter on the MAE
priority): include the parameters for which
client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
the value range of each parameter on the
MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第118页，共633页

 686970386.xls 文档密级
Range-value parameters (User defined
priority): include the parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters: include the
the value range of each parameter on the
parameters for which the MAE calculates
MAE client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters (User defined
range of each parameter on the MAE
priority): include the parameters for which
client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters: include the
the value range of each parameter on the
parameters for which the MAE calculates
MAE client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters (User defined
range of each parameter on the MAE
priority): include the parameters for which
client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
Fixed-value
according toparameters: includes theand
algorithm requirements
parameters
the value rangefor which theparameter
of each MAE provides
on the
built-in default
MAE client or onvalues
NEs.that cannot be
modified by users. The MAE delivers the
Identity-related parameters:
fixed values of these parametersinclude
based
parameters
on the objects suchthatasare
CellId, IDTYPE,
filtered according
MCC, and the
to algorithm MOC primary key and
requirements.
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第119页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第120页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
Range-value parameters (User defined
range of each parameter on the MAE
priority): include the parameters for which
client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
the value range of each parameter on the
MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第121页，共633页

 686970386.xls 文档密级
Range-value parameters (User defined
priority): include the parameters for which
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Range-value parameters (User defined
the value range of each parameter on the
priority): include the parameters for which
MAE client or on NEs.
the MAE calculates optimization values
according to algorithm requirements and
Identity-related parameters: include
the value range of each parameter on the
parameters such as CellId, IDTYPE,
MAE client or on NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第122页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related parameters: include
not optimize the values of these
parameters such as CellId, IDTYPE,
parameters.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the value
Range-value parameters: include the
range of each parameter on the MAE
parameters for which the MAE calculates
client or on NEs.
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第123页，共633页

 686970386.xls 文档密级

Parameter
Optimization Type MML Command Parameter
This NE Version
Description
This
parameter
parameter is
used to the
specifies
MISS/Missing and uniquely
ADD ULTECELL LTECellIndex index that RNC RAN16.0 and later
redundant This
identify
uniquelyan LTE
parameter
cell in thean
identifies
specifies
LTE cell. the
PLMN.
MISS/Missing and
ADD ULTECELL LTECellName cell name that
EutranCellId RNC RAN16.0 and later
redundant
uniquely of
consists
identifies anof
eNodeBID
MISS/Missing and This
LTE
20 bitscell.
and
ADD ULTECELL EUTRANCELLID parameter RNC RAN16.0 and later
redundant CellID
This of 8
specifies
bits, that is
parameter
Tracking
EutranCellId=e
uniquely Area
MISS/Missing and Code (TAC)
NodeBID the x of
ADD ULTECELL MCC identifies RNC RAN16.0 and later
redundant This
a cell. In
256 + CellID.
country that an
parameter
principle,
For cell base
LTEdetails
uniquely
stations
about thein
belongs to.a
MISS/Missing and
ADD ULTECELL MNC identifies
parameterthe
certain area RNC RAN16.0 and later
redundant
network
are managed
description, that
an
by LTE
an MME
see 3GPP TS cell in
MISS/Missing and belongs
specialized
25.413. to.
ADD ULTECELL TAC RNC RAN16.0 and later
redundant charge of the
Index
area. Theof anTAC Cn
Operator
of each cell
MISS/Missing and This
Group whose
ADD ULTECELL CnOpGrpIndex This
under these
parameter RNC RAN16.0 and later
redundant users
parametercan
base stations be
specifies
handed the to
over
specifies
is recorded
physical thein
cell
the LTE
frequency
the cell.
MISS/Missing and identity of TAC
MME. an
ADD ULTECELL CellPHYID band that
in thiscell.
area an RNC RAN16.0 and later
redundant LTE For
LTE
should
detailscellabout
beis on.
For
This details
configured
this parameter,
MISS/Missing and about
parameter
within
see 3GPP this
the TS
ADD ULTECELL LTEBand RNC RAN16.0 and later
redundant parameter,
specifies
25.331. the
value range.
see 3GPP TS
downlink
36.104. Band1
frequency
MISS/Missing and to Band25
ADD ULTECELL LTEArfcn used by anis RNC RAN16.0 and later
redundant Fdd Band.
LTE cell. For
Band33
details aboutto
MISS/Missing and ADD Band43
this is Tdd
parameter,
RNCId ID of3GPP
Band.
see an RNC TS RNC RAN16.0 and later
redundant ULTENCELL
36.104.
MISS/Missing and ADD Unique ID of a
CellId RNC RAN16.0 and later
redundant ULTENCELL cell
This
parameter
specifies the
MISS/Missing and ADD
LTECellIndex index that RNC RAN16.0 and later
redundant ULTENCELL
uniquely
identifies an
RMV LTE cell.
MISS/Missing and
ULTENCELL RNCId ID of an RNC RNC RAN16.0 and later
redundant

RMV
MISS/Missing and Unique ID of a
ULTENCELL CellId RNC RAN16.0 and later
redundant cell
This
parameter
RMV specifies the
MISS/Missing and
ULTENCELL LTECellIndex index that RNC RAN16.0 and later
redundant
uniquely
identifies an
LTE cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第124页，共633页

 686970386.xls 文档密级

Operation Description MAE Value Range and Unit Parameter Value Type
Identity-related parameters: include
parameters such as CellId,
Use this command to add
IDTYPE, MCC, and the MOC
an LTE cell that is GUI Value Range: 0 to 65535
primary key and foreign key
neighboring to the edge of Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
the UMTS coverage area. parameters such as of
CellId,
Use this command to add optimize the values these
GUI Value Range: 1 to 64 IDTYPE,
parameters.MCC, and the MOC
an LTE cell that is
characters primary key and foreign key
neighboring to the edge of Identity-related
Unit: None parameters. Theparameters:
MAE does include
not
the UMTS coverage area. parameters such as of
CellId,
Use this command to add optimize the values these
GUI Value Range: 0 to IDTYPE,
parameters.MCC, and the MOC
an LTE cell that is
268435455 primary key and foreign key
neighboring to the edge of Range-value parameters: include
Unit: None parameters. The MAE does not
the UMTS coverage area. the
Use this command to add optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
an LTE cell that is Value Range: 3 digits
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 2 to 3 digits
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 0 to 65535
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 0 to 31
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 0 to 503
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 1 to 43
according to algorithm
neighboring to the edge of Unit: None Range-value
requirements parameters:
and the value include
range
the UMTS coverage area. the parameters for which the MAE
Use this command to add of each parameter on the MAE
calculates optimization
client or on NEs. values
an LTE cell that is Value Range: 0 to 65535
according to algorithm
neighboring to the edge of Unit: None Identity-related parameters: include
requirements and the value range
the UMTS coverage area. parameters such as CellId,
of each parameter on the MAE
IDTYPE, MCC,
client or on NEs.and the MOC
Use this command to add GUI Value Range: 0 to 4095
primary key and foreign key
neighboring LTE cell. Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
parameters
optimize thesuch as of
values CellId,
these
IDTYPE,
parameters.MCC, and the MOC
Use this command to add GUI Value Range: 0 to 65535
primary key and foreign key
neighboring LTE cell. Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
parameters such
optimize the valuesas of
CellId,
these
IDTYPE,
parameters.MCC, and the MOC
Use this command to add GUI Value Range: 0 to 65535
primary key and foreign key
neighboring LTE cell. Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
parameters such
optimize the valuesas of
CellId,
these
IDTYPE,
parameters.MCC, and the MOC
Use this command to add GUI Value Range: 0 to 4095
primary key and foreign key
neighboring LTE cell. Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
parameters such
optimize the valuesas of
CellId,
these
IDTYPE,
parameters.MCC, and the MOC
Use this command to add GUI Value Range: 0 to 65535
primary key and foreign key
neighboring LTE cell. Unit: None Identity-related
parameters. Theparameters:
MAE does include
not
parameters such
optimize the valuesas of
CellId,
these
IDTYPE,
parameters.MCC, and the MOC
Use this command to add GUI Value Range: 0 to 65535
primary key and foreign key
neighboring LTE cell. Unit: None
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第125页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

MOD
– RNCId ID of an RNC RNC
UINTERFREQNCELL
Whether to send the
MOD system
– CellId Unique information
ID of a cell block RNC
UINTERFREQNCELL 11 (SIB11) carrying the
neighboring cell
MOD information.
Unique RNCFor ID of details
a
– NCellRncId about SIB11,cell see 3GPP RNC
UINTERFREQNCELL neighboring
Whether to send the
TS 25.331. If this
SIB12
parameter carryingis setthe to
MOD neighboring
Unique ID
FALSE, cell
theofneighboring
a
– NCellId information. RNC
UINTERFREQNCELL information isFor
neighboring cellnotdetails
about
included in SIB11.3GPP
SIB12, see In this
TS
case,25.331. If this
the neighboring
MOD parameter
– SIB11Ind cell cannot isserve set toas the RNC
UINTERFREQNCELL FALSE, the neighboring
target cell for access or
information
Offset of theismeasured
cell reselection notby a UE
included
CPICH in
in idle mode. Ifused
RSCP SIB12. thisIffor this
MOD
– SIB12Ind parameter
cell is
parameter is set to the
reselection set to
when RNC
UINTERFREQNCELL
TRUE,
UE
TRUE,is inthe idleneighboring
the mode.
neighboring
Offset
informationof the ismeasured in
information
CPICH Ec/No is included
included
used for in
MOD IdleQoffset1s SIB12.
In In this
a cellInreselection
SIB11. this case,
case, the
the
– cell
Cell reselection
offset
neighboring used
cell when
for
is the RNC
UINTERFREQNCELL n procedure,
neighboring the
cell RNC
can
UE
CPICHis inRSCP
preferentially
subtracts idle
this mode.
selected
offset from as
serve as
measurement the target
value cell
in
the
for target
measured
access cell
or cellfor
CPICH access
MOD IdleQoffset2s In
cell
or
RSCPa cellofreselection
selection
cell reselection
aused or by the
neighboring
– Cell offset
reselection by for
aRNC
UE inUE RNC
UINTERFREQNCELL n procedure,
reselection
UE
cell in
and connected
then the
whenranks theall
CPICH
idle
is in mode.
subtracts Ec/No
connected this offset
mode. from
mode(not
neighboring
measurement include
cells.
value
the measured
Whether
CELL_DCH). a CPICHin
neighboring
MOD ConnQoffset cell
Ec/No selection or
–
UINTERFREQNCELL 1sn
During
cell is aof
reselection
a neighboring
cell selection
candidate
when cell
the
orfor RNC
cell and
reselection,
blind then
handovers. ranks
QOffset1sn allUE
is
is in
theconnected
neighboring
cell offset cells. mode.
MOD ConnQoffset RSCP
Value threshold
corresponding
FALSE toforCPICH
indicates
– During
triggering
RSCP, cell
and selection
blindQOffset2sn or RNC
UINTERFREQNCELL 2sn that the neighboring cell
reselection,
handovers.
the considered QOffset1sn
If
cell offset as athe RSCP
is
is not
the cell offset
value
candidate of the
corresponding current
cell to CPICH
for cell
blind
MOD corresponding
exceeds
Ec/No. the valueto CPICH
of this
– BlindHoFlag handovers.
RSCP, and the Therefore,
QOffset2sn RNC
UINTERFREQNCELL parameter, RNC
blind
is thehandovers
cell to this
initiates
cell cannot a offset
blind
be handover
triggered.
corresponding
to switch to to
the indicates
UE CPICH
the
MOD BlindHOQuali Value
DRD
Ec/No. TRUE
Ec/No threshold for
– inter-frequency
that the cell is considered RNC
UINTERFREQNCELL tyCondition determining whether to
neighboring
as a candidate cell.cell Thisfor
perform
threshold the blind
appliesand to load-
blind handovers
handover. If the blind
MOD DRDEcN0Thr balancing-based
blind handovers toofthis
– measured
handovers, Ec/No
and directed the RNC
UINTERFREQNCELL eshhold cell cancell be triggered.
current
retries from low- is greater
than
Prioritythisofparameter,
frequency-band cellsthis
a neighboring to
MOD cell can
during be
high-frequency-band the
coverage-candidate
– HOCovPrio cell RNC
UINTERFREQNCELL cells.for inter-frequency
based DRD.
handovers.

08/24/2023 华为保密信息,未经授权禁止扩散 第126页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit
Use this command to
GUI Value Range: 0 to
modify the information
RAN16.0 and later 4095
about an inter-frequency
Unit: None
neighboring cell.
Use this command to
GUI Value Range: 0 to
modify the information
RAN16.0 and later 65535
about an inter-frequency
Unit: None
neighboring cell.
Use this command to
GUI Value Range: 0 to
modify the information
RAN16.0 and later 65535
about an inter-frequency
Unit: None
neighboring cell.
Use this command to
GUI Value Range: 0 to
modify the information
RAN16.0 and later 65535
about an inter-frequency
Unit: None
neighboring cell.
Use this command to Value Range: FALSE,
modify the information TRUE
RAN16.0 and later
about an inter-frequency Default Value: TRUE
neighboring cell. Unit: None
Use this command to Value Range: FALSE,
modify the information TRUE
RAN16.0 and later
about an inter-frequency Default Value: FALSE
neighboring cell. Unit: None
Use this command to
Value Range: -50 to 50
modify the information
RAN16.0 and later Default Value: 0
about an inter-frequency
Unit: dB
neighboring cell.
Use this command to
Value Range: -50 to 50
modify the information
RAN16.0 and later Default Value: 0
about an inter-frequency
Unit: dB
neighboring cell.
Use this command to
Value Range: -50 to 50
modify the information
RAN16.0 and later Default Value: 0
about an inter-frequency
Unit: dB
neighboring cell.
Use this command to
Value Range: -50 to 50
modify the information
RAN16.0 and later Default Value: 0
about an inter-frequency
Unit: dB
neighboring cell.
Use this command to
Value Range: FALSE,
modify the information
RAN16.0 and later TRUE
about an inter-frequency
Unit: None
neighboring cell.
Use this command to
Value Range: -115 to -
modify the information
RAN16.0 and later 25
about an inter-frequency
Unit: dBm
neighboring cell.
Use this command to
modify the information Value Range: -24 to 0
RAN16.0 and later
about an inter-frequency Unit: dB
neighboring cell.
Use this command to
modify the information Value Range: 0 to 3
RAN16.0 and later
about an inter-frequency Unit: None
neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第127页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
Fixed-value
MAE does not parameters: include
optimize the valuestheofparameters
these
for which
parameters.the MAE provides built-in default values
that are displayed on the MAE client and can be
modified by users. The MAE delivers the fixed
Fixed-value
values of theseparameters: include
parameters based the
onparameters
the objects
for which the MAE provides built-in
that are filtered according to algorithmdefault values
that are displayed on the MAE client and can be
requirements.
modified by users. The MAE delivers the fixed
Fixed-value
values of theseparameters: include
parameters based the
onparameters
the objects
for which the MAE provides built-in
that are filtered according to algorithmdefault values
that are displayed on the MAE client and can be
requirements.
modified by users. The MAE delivers the fixed
Fixed-value
values of theseparameters: include
parameters based the
onparameters
the objects
for which the MAE provides built-in
that are filtered according to algorithmdefault values
that are displayed on the MAE client and can be
requirements.
modified by users. The MAE delivers the fixed
Fixed-value
values of theseparameters: include
parameters based the
onparameters
the objects
for which the MAE provides built-in
that are filtered according to algorithmdefault values
that are displayed on the MAE client and can be
requirements.
modified by users. The MAE delivers the fixed
Fixed-value
values of theseparameters: include
parameters based the
onparameters
the objects
for which the MAE provides built-in
that are filtered according to algorithmdefault values
that are displayed on the MAE client and can be
requirements.
modified by users. The MAE delivers the fixed
values of these parameters based on the objects
Range-value parameters:
that are filtered according include the parameters
to algorithm
for which the
requirements. MAE calculates optimization values
according to algorithm requirements and the
value range of each parameter on the MAE client
Range-value
or on NEs. parameters: include the parameters
for which the MAE calculates optimization values
according to algorithm requirements and the
value range of each parameter on the MAE client
Range-value
or on NEs. parameters: include the parameters
for which the MAE calculates optimization values
according to algorithm requirements and the
value range of each parameter on the MAE client
Range-value
or on NEs. parameters: include the parameters
for which the MAE calculates optimization values
according to algorithm requirements and the
value range of each parameter on the MAE client
or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第128页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

MOD
– EUTRANINTRAFR LocalCellId Local cell ID eNodeB
EQNCELL
MOD
– EUTRANINTRAFR Mcc Mobile country code eNodeB
EQNCELL
MOD
– EUTRANINTRAFR Mnc Mobile network code eNodeB
EQNCELL
MOD
– EUTRANINTRAFR eNodeBId eNodeB ID eNodeB
EQNCELL
MOD
– EUTRANINTRAFR CellId Cell ID eNodeB
EQNCELL
MOD
– EUTRANINTRAFR NoHoFlag No handover indicator eNodeB
EQNCELL
RMV
– EUTRANINTRAFR LocalCellId Local cell ID eNodeB
EQNCELL
RMV
– EUTRANINTRAFR Mcc Mobile country code eNodeB
EQNCELL
RMV
– EUTRANINTRAFR Mnc Mobile network code eNodeB
EQNCELL
RMV
– EUTRANINTRAFR eNodeBId eNodeB ID eNodeB
EQNCELL
RMV
– EUTRANINTRAFR CellId Cell ID eNodeB
EQNCELL

08/24/2023 华为保密信息,未经授权禁止扩散 第129页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Modify Intra-Frequency Neighboring GUI Value Range: 0 to 255

eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None

GUI Value Range: 3 characters

Modify Intra-Frequency Neighboring
eRAN 8.1 and later 000 to 999
Relation with E-UTRAN Cell
Unit: None
GUI Value Range: 2 to 3
Modify Intra-Frequency Neighboring characters
eRAN 8.1 and later
Relation with E-UTRAN Cell 00 to 99, 000 to 999
Unit: None
Modify Intra-Frequency Neighboring GUI Value Range: 0 to 1048575
eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None

Modify Intra-Frequency Neighboring GUI Value Range: 0 to 255

eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None
Value Range:
Modify Intra-Frequency Neighboring PERMIT_HO_ENUM,
eRAN 8.1 and later
Relation with E-UTRAN Cell FORBID_HO_ENUM
Unit: None
Remove Intra-Frequency Neighboring GUI Value Range: 0 to 255
eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None

GUI Value Range: 3 characters

Remove Intra-Frequency Neighboring
eRAN 8.1 and later 000 to 999
Relation with E-UTRAN Cell
Unit: None
GUI Value Range: 2 to 3
Remove Intra-Frequency Neighboring characters
eRAN 8.1 and later
Relation with E-UTRAN Cell 00 to 99, 000 to 999
Unit: None
Remove Intra-Frequency Neighboring GUI Value Range: 0 to 1048575
eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None

Remove Intra-Frequency Neighboring GUI Value Range: 0 to 255

eRAN 8.1 and later
Relation with E-UTRAN Cell Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第130页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as
CellId, IDTYPE, MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theasMAE
CellId, IDTYPE,
client or on NEs. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第131页，共633页

 ID to the base station during a cell
setup procedure. The mapping
between logical cell IDs and local
cell IDs are configured at the RNC.
686970386.xls 文档密级
The RNC supports a maximum of
5100 logical cells. Logical cells are
The logical
uniquely butcell notID uniquely
necessarily
Optimization identifies
consecutively a cell in a
numbered radio within
network. a
MML Command Parameter The Parameter Description NE
Type RNC. For example, you can set at
logical cell ID is configured
the
the RNC.
ID of aThe RNC
logical cellsends
to 0 andthe cell
that
ID to the base
of another logicalstation
cell toduring
2. a cell
Parameter MOD setup procedure. The mapping
CellId RNC
check UCELLRLPWR between
For clear logical
and easy cellidentification,
IDs and local
RlMaxDlPwr cell
adhere to the following at
IDs are configured the RNC.
numbering
(CNDOMAINID= principles: transmit power of a
Parameter MOD Maximum
CS_DOMAIN, The RNCradio supports RNC
check UCELLRLPWR downlink link. a maximum of
MAXBITRATE=1 5100
Specify logical
differentcells.number
Logicalranges cells are
RlMinDlPwr(CN
2200)
DOMAINID=CS_ uniquely but not necessarily
for logical cells in different
Parameter MOD Minimal
consecutively
subracks. transmit
For numbered power of
example, a cana
within
you
DOMAIN, RNC
check UCELLRLPWR downlink
RNC. radio link.
specify the range of 0 to 899set
For example, you can for
MAXBITRATE=1
2200) the
the ID of a cells
logical logical in cell to 0 and
subrack 0 that
MOD of another
(MPS) andlogical
the range cell ofto 900
2. to
Parameter
UCELLINTERF CellId 1799 for the logical cells in RNC
check
REQHOCOV For clear1and
subrack (EPS). easyFor identification,
detailed
adhere to the following
information about this parameter, numbering
MOD principles:
Parameter InterFreqMeasTi Length
see 3GPP of the TStimer25.401. for the inter-
UCELLINTERF RNC
check me frequency measurement
REQHOCOV Specify different number ranges
The logical cell ID uniquely
MOD for logical cells in different
Parameter identifies a cell in a radio network.
UCELLINTERF TimeToTrig2D subracks.
Time delayFor example,
to trigger you2D
event can RNC
check The logical cell ID is configured at
REQHOCOV specify the range of 0 to 899 for
the RNC. The RNC sends the cell
the logical cells in subrack 0
MOD ID to the base station during a cell
Parameter (MPS) and the range of 900 to
UCELLINTERF TimeToTrig2F setup
Time procedure. Theevent
mapping
check 1799 delay
for thetological
trigger cells in 2F RNC
REQHOCOV between logical cell IDs and local
subrack 1 (EPS). For detailed
cell
The IDs are cell
logical configured
ID this
uniquelyat the RNC.
MOD information
Minimum about
threshold for parameter,
RSCP of
Parameter identifies
see 3GPPameasurement
TScell25.401.
in a radio network.
UCELLINTERF HHORSCPmin the
Thetarget
RNC supports
logical cell ID isa configuredor
maximum of
at RNC
check
REQHOCOV handover
5100
the logical
RNC. frequency
The cells.
RNCLogicalsends cells are
the cell
MOD uniquely
ID to the but base not necessarily
station during a cell
Parameter InterFreqReport Cell-oriented
consecutively inter-frequency
numbered
setup procedure. The mapping within a
UCELLINTERF RNC
check Mode measurement
RNC. report
between logical cell IDs and set
For example, mode.
you can local
REQHOCOV
the ID
cell IDsofarea logical
configuredcell toat0the andRNC.
that
of another logical cell to 2.
Parameter
MOD UFACH CellId The RNC supports a maximum of RNC
check
For
5100clear andcells.
logical easyLogical
identification,
cells are
adhere
uniquely to the
but following
not necessarilynumbering
The offset between the FACH
principles:
Parameter MaxFachPower( consecutively
MOD UFACH transmit powernumbered and P-CPICH within a RNC
check TRCHID=[4: 5]) RNC. For example, you can set
transmit
Specify power innumber
different a cell ranges
the ID of a logical
The logical cell ID uniquely cell to 0 and that
MOD for
of logical cells
another logical in different
cell to 2.
Parameter identifies a cell in a radio network.
UCELLINTRAF CellId subracks. For example, you can RNC
check The logical cell ID is configured at
REQHO specify
For clear theand range ofidentification,
0 to 899 for
the RNC. The easy RNC sends the cell
the logical
adhere to cells
the in subrack
following 0
numbering
MOD ID to the base station during a cell
Parameter (MPS)
principles:and the range of 900 to
UCELLINTRAF RNCId setup
ID of an procedure. The mapping
check 1799 for RNC
the logical cells in RNC
REQHO between logical cell IDs and local
subrack
Specify 1 (EPS).
different For detailed
1C, number
If events
cell IDs are 1A, and
configured 1Dat ranges
are
the RNC.
MOD information
for logical cells
reported to the RNC, about in thisthe parameter,
different target
Parameter see 3GPP
subracks. TS
For 25.401.
example, you canset
UCELLINTRAF SHOQualmin cell can
The RNCbesupportsadded toa the active
maximum of RNC
check specify the range of 0 to 899 forare
REQHO only when CPICH Ec/No
5100 logical cells. Logical cells is greater
the
than logical
uniquelythis but cellsnotinnecessarily
parameter subrack 0
MOD (MPS) and thenumberedrange of 900
Parameter This parameter
consecutively specifies the to a
within
UCELLINTRAF HystFor1C 1799 for RNC
check
REQHO
hysteretic
RNC. Forthevalue logical
example, cells
for event
you can in1Cset
subrack
the ID of1a(EPS). logical For cell detailed
to 0 and that
MOD information about
of another logical cell this to parameter,
2.
Parameter see 3GPP TS 25.401.
UAICHPWROFF CellId RNC
check
SET For clear and easy identification,
adhere to the following numbering
principles:

Specify different number ranges

08/24/2023 华为保密信息,未经授权禁止扩散
for logical cells in different 第132页，共633页
subracks. For example, you can
specify the range of 0 to 899 for
the logical cells in subrack 0
 ID to the base station during a cell
setup procedure. The mapping
between logical cell IDs and local
cell IDs are configured at the RNC.
686970386.xls 文档密级
The RNC supports a maximum of
5100 logical cells. Logical cells are
MOD uniquely
Difference but not necessarily
between the transmit
Parameter AICHPowerOffs consecutively numbered within
UAICHPWROFF power of an AICH and that of a RNC
check et RNC.
Uniquely For example,
identifying you
a can
PRACH setin a
SET PCPICH
the ID
cell.The
The ofID
logicala logical
of
cella ID cell
common to 0physical
uniquely and that
of another
channel
identifies logical
isausedcell intoa cell to 2.network.
identify
radio a
Parameter
MOD UPRACH CellId common physical channel
The logical cell ID is configured in a cell.
at RNC
check
For
Each clear
the RNC. commonand
The easy physical
RNC identification,
sends channel
the cellis
adhere
uniquely to the
numbered following within
ID to the base station during a cell numbering
a cell.
Parameter principles:
The
setup IDs of common
procedure. The physical
mapping
MOD UPRACH PhyChId RNC
check channels logical
between shouldcell be planned
IDs and local
Specify
before
The power different
the
arechannels
ramp number are ranges
ofatconfigured
cell
The IDslogical IDstep
configured
cell uniquely thethe RNC.
for logical
the
random cells in
cell.One
access different
cell can
preambles be
Parameter PowerRampSte identifies a cell in a radio network.
MOD UPRACH subracks.
configured
transmitted For
RNC supportswith example,
before one aor
the you
two
UE
maximum canof
receives RNC
check p The logical cell ID is configured at
specify
PRACHs. theItrange of 0 to in899 forare
the RNC. The RNC sends thethat
the
5100 acquisition
logical is recommended
indicator
cells. Logical the
cellscell
the
one logical cells in subrack 0
ID
The toPRACH
random
uniquelytheaccess
maximumbut
base bestation
not configured.
process
necessarily
number during a cell
Parameter PreambleRetran (MPS) and
consecutively the range
numbered ofof900 to a
within
MOD UPRACH setup
preambles procedure.
transmitted The mapping
in in
a RNC
check sMax 1799
RNC. for the
Forlogical logical
example, cells
you
between
preamble IDs can
cellcycle and set
local
subrack
the ID 1aramping
(EPS). For
cell detailed
cell IDsofare logical
configured toat0theandRNC.
that
MOD information
of another logical about cellthis to parameter,
2.
Parameter see 3GPP TS 25.401.
UPICHPWROFF CellId The RNC supports a maximum of RNC
check
SET For
5100clear andcells.
logical easyLogical
identification,
cells are
The
adhere logical
uniquely tobut
the cell ID uniquely
following
not necessarily numbering
MOD Difference
principles:a between
identifies cellnumbered the transmit
in a radio network.
Parameter PICHPowerOffs consecutively
UPICHPWROFF power
The of PICH
logical cell and
ID is that ofwithin aat
configured RNC
check et RNC. For example, you can set
SET PCPICH.
the
the RNC.
Specify aThe
ID ofdifferent RNC
logical sends
number
cell the cell
to 0ranges
and that
ADD ID
of another logical cell to 2. a cell
for to the
logical base
cells station
in during
different
HO parameter setup
subracks. procedure.
For example, The mappingyou can
UCELLINTRAF CellId RNC
optimization between
specify logical
the range cell IDs
0 to and
899 local
ofidentification, for
REQHO For clear and easy
cell
the IDs
logicalare configured
cells in subrack
adhere to the following numbering at the
0 RNC.
ADD (MPS)
principles:and the range of 900 to
HO parameter
UCELLINTRAF RNCId ID
The
1799ofRNC
an
for RNCsupports
the logical acells maximum
in of RNC
optimization
REQHO 5100
subrack
Specify logical
1 (EPS).
differentcells.number
Logical
For detailedcells are
ranges
ADD uniquely
for logicalbut
information cellsnotinnecessarily
about this parameter,
different
HO parameter This parameter
consecutively
subracks. For numbered
see 3GPP TS specifiesyou
25.401.
example, thecana
within
UCELLINTRAF HystFor1D RNC
optimization hysteretic
RNC. For value
example,
specify the range of 0 to 899for event
you can1Dset
for
REQHO
the
the logical cells in subrack and
ID of a logical cell to 0 0 that
ADD of another
(MPS) andlogical
the range cell ofto 900
2. to
HO parameter
UCELLINTERF CellId 1799 for the logical cells in RNC
optimization
REQHOCOV For clear1and
subrack (EPS). easyFor identification,
detailed
adhere to the following
information about this parameter, numbering
ADD principles:
HO parameter see 3GPP TS 25.401. event 2D.
UCELLINTERF HystFor2D Hysteresis for triggering RNC
optimization
REQHOCOV Specify different number ranges
ADD for logical cells in different
HO parameter subracks.
UCELLINTERF HystFor2F HysteresisForfor example,
triggering you can
event 2F. RNC
optimization specify the range of 0 to 899 for
REQHOCOV
the logical cells in subrack 0
ADD Ec/No threshold of triggering the
HO parameter InterFreqCSThd (MPS) and the range of 900 to
UCELLINTERF inter-frequency measurement
1799 for the logical cells in for RNC
optimization 2DEcN0
REQHOCOV CS services
subrack 1 (EPS). For detailed
ADD information aboutofthis
Ec/No threshold parameter,
triggering the
HO parameter InterFreqR99Ps see 3GPP TS 25.401.
UCELLINTERF inter-frequency measurement for RNC
optimization Thd2DEcN0
REQHOCOV PS non-HSPA services
ADD Ec/No threshold of triggering the
HO parameter InterFreqHThd2
UCELLINTERF inter-frequency measurement for RNC
optimization DEcN0
REQHOCOV HSPA services
ADD Ec/No threshold of stopping the
HO parameter InterFreqCSThd
UCELLINTERF inter-frequency measurement for RNC
optimization 2FEcN0
REQHOCOV CS services

08/24/2023 华为保密信息,未经授权禁止扩散 第133页，共633页

 identifies a cell in a radio network.
The logical cell ID is configured at
the RNC. The RNC sends the cell
ID to the base station during a cell
686970386.xls
setup procedure. The mapping 文档密级
between logical cell IDs and local
cell IDs are configured at the RNC.
ADD Ec/No threshold of stopping the
HO parameter InterFreqR99Ps
UCELLINTERF inter-frequency
The RNC supports measurement
a maximumfor of RNC
optimization Thd2FEcN0
REQHOCOV PS non-HSPA
5100 logical cells. services
Logical cells are
The logical
uniquely butcellnotID uniquely
necessarily
ADD Ec/No threshold
identifies a cell in ofa stopping the
radio within
network.
HO parameter InterFreqHThd2 consecutively numbered a
UCELLINTERF inter-frequency
The logical measurement
cell ID isyou configured forat RNC
optimization FEcN0 RNC. For example, can set
REQHOCOV HSPA
the RNC.services
The RNC sends the cell
the ID of a logical cell to 0 and that
MOD ID to the base
of another station
logical cell toduring
2. a cell
HO parameter setup procedure. The mapping
UCELLINTRAF CellId RNC
optimization between
REQHO For clear logical
and easy cellidentification,
IDs and local
cell
adhere to the following at
IDs are configured the RNC.
numbering
MOD principles:
HO parameter
UCELLINTRAF RNCId ID
TheofRNC
an RNC supports a maximum of RNC
optimization
REQHO 5100
Specify logical cells.number
different Logicalranges
cells are
MOD uniquely but not necessarily
for logical cells in different
HO parameter This parameter
consecutively
subracks. specifiesyou
For numbered
example, thecana
within
UCELLINTRAF HystFor1D RNC
optimization hysteretic
RNC. For value
example, for
specify the range of 0 to 899 event
you 1Dset
can for
REQHO
the
the ID of a cells
logical logicalin cell to 0 and
subrack 0 that
MOD of another
(MPS) andlogical
the rangecell ofto 900
2. to
HO parameter
UCELLINTERF CellId 1799 for the logical cells in RNC
optimization
REQHOCOV For clear1and
subrack (EPS).easyFor identification,
detailed
adhere to the following
information about this parameter, numbering
MOD principles:
HO parameter see 3GPP TS 25.401.
UCELLINTERF HystFor2D Hysteresis for triggering event 2D. RNC
optimization
REQHOCOV Specify different number ranges
MOD for logical cells in different
HO parameter subracks.
UCELLINTERF HystFor2F HysteresisForfor example,
triggering you can
event 2F. RNC
optimization specify the range of 0 to 899 for
REQHOCOV
the logical cells in subrack 0
MOD Ec/No threshold of triggering the
HO parameter InterFreqCSThd (MPS) and the range of 900 to
UCELLINTERF inter-frequency measurement
1799 for the logical cells in for RNC
optimization 2DEcN0
REQHOCOV CS services
subrack 1 (EPS). For detailed
MOD information aboutofthis
Ec/No threshold parameter,
triggering the
HO parameter InterFreqR99Ps see 3GPP TS 25.401.
UCELLINTERF inter-frequency measurement for RNC
optimization Thd2DEcN0
REQHOCOV PS non-HSPA services
MOD Ec/No threshold of triggering the
HO parameter InterFreqHThd2
UCELLINTERF inter-frequency measurement for RNC
optimization DEcN0
REQHOCOV HSPA services
The logical cell ID uniquely
MOD Ec/No threshold of stopping the
HO parameter InterFreqCSThd identifies a cell in a radio network.
UCELLINTERF inter-frequency
The logical cell IDmeasurement
is configuredforat RNC
optimization 2FEcN0
REQHOCOV CS services
the RNC. The RNC sends the cell
MOD ID to the
Ec/No base station
threshold during the
of stopping a cell
HO parameter InterFreqR99Ps setup procedure. The mapping
UCELLINTERF inter-frequency measurement for RNC
optimization Thd2FEcN0 between logicalservices
cell IDs and local
REQHOCOV PS non-HSPA
cell IDs are configured at the RNC.
MOD Ec/No threshold of stopping the
HO parameter InterFreqHThd2
UCELLINTERF inter-frequency
The RNC supports measurement
a maximumfor of RNC
optimization FEcN0
REQHOCOV HSPA services
5100 logical cells. Logical cells are
MOD uniquely but not necessarily
HO parameter consecutively
UINTERFREQN RNCId ID of an RNC numbered within a RNC
optimization RNC. For example, you can set
CELL
the ID of a logical cell to 0 and that
MOD of another logical cell to 2.
HO parameter
UINTERFREQN CellId RNC
optimization
CELL For clear and easy identification,
adhere to the following numbering
MOD principles:
HO parameter Unique RNC ID of a neighboring
UINTERFREQN NCellRncId RNC
optimization cell
CELL Specify different number ranges
for logical cells in different
subracks. For example, you can
specify the range of 0 to 899 for
the logical cells in subrack 0
08/24/2023 华为保密信息,未经授权禁止扩散
(MPS) and the range of 900 to
第134页，共633页
1799 for the logical cells in
subrack 1 (EPS). For detailed
 The logical cell ID uniquely
686970386.xls
identifies a cell in a radio network. 文档密级
The logical cell ID is configured at
the RNC. The RNC sends the cell
MOD ID to the base station during a cell
HO parameter setup procedure. The mapping
UINTERFREQN NcellId Neighboring Cell ID RNC
optimization between logical cell IDs and local
CELL
cell IDs are configured at the RNC.
MOD
HO parameter
UINTERFREQN CIOOffset CIO
The RNCof a neighboring cell.
supports a maximum of RNC
optimization
CELL 5100 logical cells. Logical cells are
MOD uniquely but not necessarily
HO parameter consecutively
UINTRAFREQN RNCId ID of an RNC numbered within a RNC
optimization RNC. For example, you can set
CELL
the ID of a logical cell to 0 and that
MOD of another logical cell to 2.
HO parameter
UINTRAFREQN CellId RNC
optimization
CELL For clear and easy identification,
adhere to the following numbering
MOD principles:
HO parameter Unique RNC ID of a neighboring
UINTRAFREQN NCellRncId RNC
optimization cell
CELL Specify different number ranges
MOD for logical cells in different
HO parameter subracks. ForCell
example, you can
UINTRAFREQN NcellId Neighboring ID RNC
optimization specify the range of 0 to 899 for
CELL
the logical cells in subrack 0
MOD (MPS) and the range of 900 to
HO parameter
UINTRAFREQN CIOOffset CIO
1799offor a the
neighboring
logical cellscell.in RNC
optimization
CELL subrack 1 (EPS). For detailed
The logical cell
information aboutID this
uniquely
ADD Quality requirement
identifies a TS
cell25.401. forparameter,
in a radio the cell of
network.
HO parameter see 3GPP
UCELLINTERR TargetRatCsThd another
The logical cell ID is inter-RAT
RAT during configuredCS at RNC
optimization
ATHOCOV handovers
the RNC. The RNC sends the cell
ADD ID to therequirement
Quality base stationforduring the cella cell
of
HO parameter TargetRatR99Ps setup procedure. The mappingPS RNC
UCELLINTERR another RAT during inter-RAT
optimization Thd between logical cellhandovers
IDs and local
ATHOCOV non-HSPA service
cell
The IDs are cell
logical configured
ID uniquelyat the RNC.
MOD Quality requirement
identifies a cell in a radio for the cell of
network.
HO parameter
UCELLINTERR TargetRatCsThd anotherRNCRAT
The logical during
supports
cell ID isainter-RAT
maximumCS
configured at RNC
of
optimization
ATHOCOV handovers
5100
the logical
RNC. Thecells.
RNCLogical
sends cells are
the cell
MOD uniquely
ID to the but
base not necessarily
station during
Quality requirement for the cell of a cell
HO parameter TargetRatR99Ps consecutively
setup procedure. numbered
The withinPS
mapping a RNC
UCELLINTERR another RAT during inter-RAT
optimization Thd RNC.
between For example,
logical you can
cellhandovers set
IDs and local
ATHOCOV non-HSPA service
the ID
cell IDsofarea logical cell toat0the
configured andRNC.
that
MOD of another logical cell to 2.
HO parameter
UCELLINTERR CellId The RNC supports a maximum of RNC
optimization
ATHOCOV For
5100clear andcells.
logical easyLogical
identification,
cells are
adhere
uniquely to the
but following
not numbering
necessarily
MOD Quality
principles: requirement for the cell of
HO parameter consecutively numbered within a RNC
UCELLINTERR TargetRatHThd another RAT during inter-RAT
optimization RNC. For example, you can set
ATHOCOV HSPA
Specify handoversnumber ranges
the ID ofdifferent
a logical cell to 0 and that
ADD for logical cells
of another logicalin different
cell to 2.
HO parameter subracks. For example, you can
UCELLINTERR CellId RNC
optimization specify the range
ATHOCOV For clear and easyofidentification,
0 to 899 for
the logical
adhere cells
to the in subrack
following 0
numbering
ADD Quality
(MPS)
principles: requirement
and the rangefor of the
900cell
to of
HO parameter
UCELLINTERR TargetRatHThd another
1799 forRAT duringcells
the logical inter-RAT
in RNC
optimization
ATHOCOV HSPA
subrack handovers
1 (EPS). For
Specify different number ranges detailed
information
for logical cells about this parameter,
in different
Feature see 3GPP
subracks. TS
For 25.401.
example, you can
DSP LICUSAGE TYPE Query type RNC
optimization specify the range of 0 to 899 for
the logical cells in subrack 0
Feature CNOPERATORI (MPS) and the range of 900 to
DSP LICUSAGE Operator
1799 index
for the logical cells in RNC
optimization NDEX
subrack 1 (EPS). For detailed
information about this parameter,
see 3GPP TS 25.401.

08/24/2023 华为保密信息,未经授权禁止扩散 第135页，共633页

 ID to the base station during a cell
setup procedure. The mapping
between logical cell IDs and local
cell IDs are configured at the RNC.
686970386.xls 文档密级
The RNC supports a maximum of
5100 logical cells. Logical cells are
SET uniquely but not necessarily
Feature consecutively numbered within a RNC
UCORRMALGO DrSwitch Direct Retry Switch
optimization RNC. For example, you can set
SWITCH
the ID of a logical cell to 0 and that
MOD
of another logical cell to 2.
Feature UCELLDISTAN
CellId RNC
optimization CEREDIRECTI
For clear and easy identification,
ON
MOD adhere to the following numbering
Feature UCELLDISTAN InterFreqRedirS principles:
Inter-freq Redirection Switch RNC
optimization CEREDIRECTI witch
ON Specify different number ranges
MOD for logical cells in different
Feature UCELLDISTAN InterFreqRedirD Inter-freq
subracks. Redirect Propayou
For example, Delay
can RNC
optimization CEREDIRECTI elayThd Thres
specify the range of 0 to 899 for
ON the logical cells in subrack 0
MOD
Feature UCELLDISTAN InterFreqRedirF (MPS) andRedirection
Inter-freq the range of 900 to
Factor of
1799 for the logical cells in RNC
optimization CEREDIRECTI actorOfNorm Normal
ON subrack 1 (EPS). For detailed
MOD information about this parameter,
Feature UCELLDISTAN InterFreqRedirF Inter-freq
see 3GPPRedirection
TS 25.401.Factor of RNC
optimization CEREDIRECTI actorOfLDR LDR
ON
MOD
Feature UCELLDISTAN
RedirBandInd ReDirection target band indicator RNC
optimization CEREDIRECTI
ON
MOD
Feature UCELLDISTAN ReDirUARFCNU Redirection Target UL Frequency
RNC
optimization CEREDIRECTI plinkInd Index
ON
MOD
Feature UCELLDISTAN ReDirUARFCND Redirection target downlink
RNC
optimization CEREDIRECTI ownlink UARFCN
ON The logical cell ID uniquely
MOD
Feature UCELLDISTAN identifies a cell in a radio network.
RedirSwitch Inter-Rat
The logical Redirection Switch
cell ID is configured at RNC
optimization CEREDIRECTI
ON the RNC. The RNC sends the cell
MOD ID to the base station during a cell
Feature UCELLDISTAN Inter-Rat RedirectThe
setup procedure. Propa Delay
mapping
DelayThs RNC
optimization CEREDIRECTI Thres
between logical cell IDs and local
ON cell IDs are configured at the RNC.
MOD
Feature UCELLDISTAN RedirFactorOfN Inter-Rat Redirection Factor Of
optimization CEREDIRECTI orm The
NormalRNC supports a maximum of RNC
ON 5100 logical cells. Logical cells are
MOD uniquely but not necessarily
Feature UCELLDISTAN RedirFactorOfL consecutively
Inter-Rat Redirection
numberedFactor Of a
within RNC
optimization CEREDIRECTI DR LDR For example, you can set
RNC.
ON the ID of a logical cell to 0 and that
ADD
of another logical cell to 2.
Feature UCELLDISTAN
CellId RNC
optimization CEREDIRECTI
For clear and easy identification,
ON
ADD adhere to the following numbering
Feature UCELLDISTAN InterFreqRedirS principles:
Inter-freq Redirection Switch RNC
optimization CEREDIRECTI witch
ON Specify different number ranges
ADD for logical cells in different
Feature UCELLDISTAN InterFreqRedirD Inter-freq
subracks. Redirect Propayou
For example, Delay
can RNC
optimization CEREDIRECTI elayThd Thres
specify the range of 0 to 899 for
ON the logical cells in subrack 0
ADD
Feature (MPS) andRedirection
UCELLDISTAN InterFreqRedirF Inter-freq the range of 900 to
Factor of
1799 for the logical cells in RNC
optimization CEREDIRECTI actorOfNorm Normal
ON subrack 1 (EPS). For detailed
information about this parameter,
see 3GPP TS 25.401.

08/24/2023 华为保密信息,未经授权禁止扩散 第136页，共633页

 686970386.xls 文档密级

ADD
Feature UCELLDISTAN InterFreqRedirF Inter-freq Redirection Factor of
RNC
optimization CEREDIRECTI actorOfLDR LDR
ON
ADD
Feature UCELLDISTAN
RedirBandInd ReDirection target band indicator RNC
optimization CEREDIRECTI
ON
ADD
Feature UCELLDISTAN ReDirUARFCNU Redirection Target UL Frequency
RNC
optimization CEREDIRECTI plinkInd Index
ON
ADD
Feature UCELLDISTAN ReDirUARFCND Redirection target downlink
RNC
optimization CEREDIRECTI ownlink UARFCN
ON
ADD
Feature UCELLDISTAN
RedirSwitch Inter-Rat Redirection Switch RNC
optimization CEREDIRECTI
ON The logical cell ID uniquely
ADD
Feature UCELLDISTAN identifies a cell in aPropa
Inter-Rat Redirect radio Delay
network.
DelayThs The logical cell ID is configured at RNC
optimization CEREDIRECTI Thres
ON the RNC. The RNC sends the cell
ADD ID to the base station during a cell
Feature UCELLDISTAN RedirFactorOfN Inter-Rat Redirection
setup procedure. TheFactor
mapping Of
RNC
optimization CEREDIRECTI orm Normal logical cell IDs and local
between
ON cell
The IDs are cell
logical configured
ID uniquely at the RNC.
ADD
Feature UCELLDISTAN RedirFactorOfL identifies a cell in
Inter-Rat Redirection Factor a radio network.
Of
The RNC
logical supports
cell ID a
is maximum
configured of
at RNC
optimization CEREDIRECTI DR LDR
ON 5100
the RNC.logical
Thecells.RNCLogical
sends cells are
the cell
uniquely
ID to the but base not necessarily
station during a cell
Feature SET PerfEnhanceSwi consecutively
setup procedure. numbered
The mapping within a
Performance Enhancement Switch RNC
optimization UCORRMPARA tch RNC. For example, you
between logical cell IDs and local can set
the
TheID
cell IDs ofare
logicala logical ID cell
configured
cell toat0the
uniquely andRNC.
that
of another logical cell to
identifies a cell in a radio network. 2.
Power
MOD UCELL CellId RNC supports
The logical cell ID isa configured
maximum of at RNC
optimization
For
5100
the clear
RNC. and
logical easy
Thecells. identification,
RNCLogical
sends cells are
the cell
adhere
ID to thetobut
uniquely thenot
base following numbering
necessarily
station during a cell
Power principles:
consecutively
setup procedure. numbered
The mapping within a
MOD UCELL PCPICHPower TX power of the P-CPICH in a cell. RNC
optimization RNC. For example, you
between logical cell IDs and local can set
Specify
the ID
cell IDsofdifferent
a logical
are number
cell toat0ranges
configured andRNC.
the that
MOD for logical cells in
of another logical cell to 2.different
Power subracks. For example, you canof
UCELLALGOS CellId The RNC supports a maximum RNC
optimization specify
WITCH 5100 logical cells. Logical899
For clear theand range
easy of 0 to
identification,forare
cells
the logical
adhere to cells
the in subrack
following
uniquely but not necessarily 0
numbering
MOD (MPS) and
Power NBMLdcAlgoSwi principles:
Whether
consecutively to the
enablerange
numberedtheofalgorithms
900 to a
within
UCELLALGOS 1799 for the logical cells in RNC
optimization tch relatedFor
RNC. to cell load control.
example, you can set
WITCH subrack 1a(EPS). For
Specify
the ID ofdifferent cell detailed
logicalnumber to 0ranges
and that
information
for logical about
cells in
of another logical cell to this parameter,
different 2.
Power MOD see 3GPPFor
subracks. TS example,
25.401. you can
CellId RNC
optimization UPCPICHPWR specify the range
For clear and easyofidentification,
0 to 899 for
the logical
adhere
Maximum cells
to the
TX in subrack
following
power 0
numbering
of the
Power MOD MaxPCPICHPo (MPS)
principles:
PCPICH andin the range
a cell. Thisofparameter
900 to
1799 forthe
themaximum
logical cells in RNC
optimization UPCPICHPWR wer defines coverage
subrack
Specify
area 1 (EPS).
of adifferent For
cell. number ranges detailed
Minimum
logical TX
information
for power
about
cells of parameter,
this the PCPICH
in different
Power MOD MinPCPICHPow in a cell.
see 3GPPFor
subracks. This parameter
TS example,
25.401. you defines
can RNC
optimization UPCPICHPWR er the
specify the range of 0 to 899 of
minimum coverage area fora
cell.
the logical cells in subrack 0
(MPS) and the range of 900 to
1799 for the logical cells in
subrack 1 (EPS). For detailed
information about this parameter,
see 3GPP TS 25.401.

08/24/2023 华为保密信息,未经授权禁止扩散 第137页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to modify GUI Value Range: 0 to

RAN16.0 and later transmit power parameters of 65535
the DL link in a cell. Unit: None
Use this command to modify Value Range: -350 to 150
RAN16.0 and later transmit power parameters of Default Value: 20
the DL link in a cell. Unit: 0.1dB
Use this command to modify Value Range: -350 to 150
RAN16.0 and later transmit power parameters of Default Value: -150
the DL link in a cell. Unit: 0.1dB
Use this command to modify
parameters in the cell-oriented GUI Value Range: 0 to
RAN16.0 and later coverage-based inter-frequency 65535
handover measurement Unit: None
Use this command to modify
algorithm
parameters in the cell-oriented
Default Value: {15; 60}
RAN16.0 and later coverage-based inter-frequency
Unit: s
handover measurement Value Range: D0, D10, D20,
Use this command to modify
algorithm D40, D60, D80, D100, D120,
parameters in the cell-oriented
D160, D200, D240, D320,
RAN16.0 and later coverage-based inter-frequency
D640, D1280, D2560, D5000
handover measurement Value
Use this command to modify DefaultRange:
Value: D0,
D320D10, D20,
algorithm D40, D60, D80, D100, D120,
parameters in the cell-oriented Unit: None
D160, D200, D240, D320,
RAN16.0 and later coverage-based inter-frequency
D640, D1280, D2560, D5000
handover measurement
Use this command to modify Default Value: D1280
algorithm
parameters in the cell-oriented Unit: None
Default Value: {-115; -95}
RAN16.0 and later coverage-based inter-frequency
Unit: dBm
handover measurement
Use this command to modify
algorithm
parameters in the cell-oriented
RAN16.0 and later coverage-based inter-frequency NA
handover measurement
algorithm
GUI Value Range: 0 to
Use this command to modify a
RAN16.0 and later 65535
FACH
Unit: None
Value Range: -350 to 150
Use this command to modify a
RAN16.0 and later Default Value: 20
FACH
Use this command to modify the Unit: 0.1dB
parameters in the intra-
frequency handover GUI Value Range: 0 to
RAN16.0 and later measurement algorithm for a 65535
Use this command
cell, that is, configure to modify
signalingthe Unit: None
parameters in the intra-
parameters for events 1A, 1B,
frequency
1C, 1D, 1F,handover
and 2J GUI Value Range: 0 to 4095
RAN16.0 and later measurement algorithm for a
Use this command to modify the Unit: None
cell, that is, configure signaling
parameters in the intra-
parameters for events 1A, 1B,
frequency
1C, 1D, 1F,handover
and 2J Default Value: {-20; -16}
RAN16.0 and later measurement algorithm for a
Use this command to modify the Unit: dB
cell, that is, configure signaling
parameters in the intra-
parameters for events 1A, 1B,
frequency
1C, 1D, 1F,handover
and 1J Value Range: 0 to 15
RAN16.0 and later measurement
1. algorithm
Use this command to for a
modify Default Value: 8
cell, that is,offset
the power configure signaling
information of Unit: 0.5dB
parameters
the AICH in for events 1A, 1B,
a cell.
1C, 1D, 1F, and 1J GUI Value Range: 0 to
RAN16.0 and later 65535
3. An AICH is used to carry
Unit: None
acquisition indicators, each of
which corresponds to the
signature of the RACH.

08/24/2023 华为保密信息,未经授权禁止扩散 第138页，共633页

 686970386.xls 文档密级
1. Use this command to modify
the power offset information of
the AICH in a cell.
Value Range: -22 to 5
RAN16.0 and later Default Value: -6
2. An AICH is used to carry
Unit: dB
acquisition indicators, each of
whichthis
Use corresponds
command is to used
the to GUI Value Range: 0 to
signature
RAN16.0 and later modify of the configuration
PRACH RACH. 65535
information. Unit: None
Use this command is used to
GUI Value Range: 0 to 255
RAN16.0 and later modify PRACH configuration
Unit: None
information.
This command is used to modify
Default Value: {1; 2}
RAN16.0 and later PRACH configuration
Unit: dB
information.
This command is used to modify
Default Value: {20; 32}
RAN16.0 and later PRACH configuration
Unit: None
information.
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later power offset information of the 65535
PICH in a cell Unit: None
Use this command to modify the Value Range: -22 to 5
RAN16.0 and later power offset information of the Default Value: -7
Use
PICHthis
in acommand
cell to add intra- Unit: dB
frequency handover
measurement algorithm GUI Value Range: 0 to
RAN16.0 and later parameters for a cell, that is, 65535
Use this command
configure signaling to add intra-
parameters Unit: None
frequency handover
for events 1A, 1B, 1C, 1D, 1F,
measurement
and 2J algorithm
GUI Value Range: 0 to 4095
RAN16.0 and later parameters for a cell, that is,
Use this command Unit: None
configure signaling to add intra-
parameters
frequency handover
for events 1A, 1B, 1C, 1D, 1F,
measurement
and 2J algorithm
Default Value: 8
RAN16.0 and later parameters for a cell, that is,
Unit: 0.5dB
configure signaling parameters
Use this command
for events to add
1A, 1B, 1C, 1D,cell-
1F,
oriented
and 1J coverage-based inter- GUI Value Range: 0 to
RAN16.0 and later frequency handover 65535
measurement algorithm Unit: None
Use this command to add cell-
parameters
oriented coverage-based inter-
Default Value: 4
RAN16.0 and later frequency handover
Unit: 0.5dB; 0.5dBm
measurement algorithm
Use this command to add cell-
parameters
oriented coverage-based inter-
Default Value: 4
RAN16.0 and later frequency handover
Unit: 0.5dB; 0.5dBm
measurement algorithm
Use this command to add cell-
parameters
oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 14+HystFor2D/2
measurement algorithm Unit: dB
Use this command to add cell-
parameters
oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 14+HystFor2D/2
measurement algorithm Unit: dB
Use this command to add cell-
parameters
oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 14+HystFor2D/2
measurement algorithm Unit: dB
Use this command to add cell-
parameters
oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 12+HystFor2D/2
measurement algorithm Unit: dB
parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第139页，共633页

 686970386.xls 文档密级

Use this command to add cell-

oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 12+HystFor2D/2
measurement algorithm Unit: dB
Use this command to add cell-
parameters
oriented coverage-based inter- Default Value: -
RAN16.0 and later frequency handover 12+HystFor2D/2
Use this command
measurement to modify the
algorithm Unit: dB
parameters
parameters in the intra-
frequency handover GUI Value Range: 0 to
RAN16.0 and later measurement algorithm for a 65535
Use this command
cell, that to modify
is, configure the
signaling Unit: None
parameters in the intra-
parameters for events 1A, 1B,
frequency
1C, 1D, 1F,handover
and 2J GUI Value Range: 0 to 4095
RAN16.0 and later measurement algorithm for a
Use this command to modify the Unit: None
cell, that is, configure signaling
parameters in the intra-
parameters for events 1A, 1B,
frequency
1C, 1D, 1F,handover
and 2J Default Value: 8
RAN16.0 and later measurement algorithm for a
Unit: 0.5dB
cell, that is, configure signaling
Use this command
parameters to modify
for events 1A, 1B,
parameters in
1C, 1D, 1F, and 1Jthe cell-oriented GUI Value Range: 0 to
RAN16.0 and later coverage-based inter-frequency 65535
handover measurement Unit: None
Use this command to modify
algorithm
parameters in the cell-oriented
Default Value: 4
RAN16.0 and later coverage-based inter-frequency
Unit: 0.5dB; 0.5dBm
handover measurement
Use this command to modify
algorithm
parameters in the cell-oriented
Default Value: 4
RAN16.0 and later coverage-based inter-frequency
Unit: 0.5dB; 0.5dBm
handover measurement
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 14+HystFor2D/2
handover measurement Unit: dB
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 14+HystFor2D/2
handover measurement Unit: dB
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 14+HystFor2D/2
handover measurement Unit: dB
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 12+HystFor2D/2
handover measurement Unit: dB
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 12+HystFor2D/2
handover measurement Unit: dB
Use this command to modify
algorithm
parameters in the cell-oriented Default Value: -
RAN16.0 and later coverage-based inter-frequency 12+HystFor2D/2
handover measurement Unit: dB
algorithm
Use this command to modify the
GUI Value Range: 0 to 4095
RAN16.0 and later information about an inter-
Unit: None
frequency neighboring cell.
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later information about an intra- 65535
frequency neighboring cell Unit: None
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later information about an inter- 65535
frequency neighboring cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第140页，共633页

 686970386.xls 文档密级

Use this command to modify the GUI Value Range: 0 to

RAN16.0 and later information about an inter- 65535
frequency neighboring cell. Unit: None
Use this command to modify the
Value Range: -20 to 20
RAN16.0 and later information about an inter-
Unit: 0.5 dB
frequency neighboring cell.
Use this command to modify the
GUI Value Range: 0 to 4095
RAN16.0 and later information about an intra-
Unit: None
frequency neighboring cell
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later information about an intra- 65535
frequency neighboring cell Unit: None
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later information about an intra- 65535
frequency neighboring cell Unit: None
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later information about an intra- 65535
frequency neighboring cell Unit: None
Use this command to modify the
Value Range: -20 to 20
RAN16.0 and later information about an intra-
Unit: 0.5 dB
frequency neighboring cell
Use this command to add cell-
oriented coverage-based inter- Default Value: 26
RAN16.0 and later
RAT handover measurement Unit: dBm
algorithm parameters
Use this command to add cell-
oriented coverage-based inter- Default Value: 26
RAN16.0 and later
RAT handover measurement Unit: dBm
algorithm
Use parameters
this command to modify
cell-oriented coverage-based
Default Value: 26
RAN16.0 and later inter-RAT handover
Unit: dBm
measurement algorithm
Use this command to modify
parameters
cell-oriented coverage-based
Default Value: 26
RAN16.0 and later inter-RAT handover
Unit: dBm
measurement algorithm
Use this command to modify
parameters
cell-oriented coverage-based GUI Value Range: 0 to
RAN16.0 and later inter-RAT handover 65535
measurement algorithm Unit: None
Use this command to modify
parameters
cell-oriented coverage-based
Default Value: 26
RAN16.0 and later inter-RAT handover
Unit: dBm
measurement algorithm
parameters
Use this command to add cell-
GUI Value Range: 0 to
oriented coverage-based inter-
RAN16.0 and later 65535
RAT handover measurement
Unit: None
algorithm parameters
Use this command to add cell-
oriented coverage-based inter- Default Value: 26
RAN16.0 and later
RAT handover measurement Unit: dBm
algorithm parameters
Use this command to query the
RAN16.0 and later allocated values and license –
usage of operators
Use this command to query the
RAN16.0 and later allocated values and license –
usage of operators

08/24/2023 华为保密信息,未经授权禁止扩散 第141页，共633页

 686970386.xls 文档密级

Default Value:
Set Connection-Oriented DR_RRC_DRD_SWITCH:
RAN16.0 and later
Algorithm Switches ON
Unit: None
Use this command to modify the GUI Value Range: 0 to
RAN16.0 and later cell oriented parameters for 65535
distance based RRC redirection Unit: None
Use this command to modify the
Default Value: ON
RAN16.0 and later cell oriented parameters for
Unit: None
distance based RRC redirection
Use this command to modify the
Value Range: 0 to 255
RAN16.0 and later cell oriented parameters for
Unit: 3chip
distance based RRC redirection
Use this command to modify the
Default Value: 50
RAN16.0 and later cell oriented parameters for
Unit: %
distance based RRC redirection
Use this command to modify the
Default Value: 75
RAN16.0 and later cell oriented parameters for
Unit: %
distance based RRC redirection Value Range: Band1, Band2,
Band3, Band4, Band5,
Use this command to modify the
Band6, Band7, Band8,
RAN16.0 and later cell oriented parameters for
Band9, DependOnNCell,
distance based RRC redirection
BandIndNotUsed
Use this command to modify the Unit: None
Default Value: FALSE
RAN16.0 and later cell oriented parameters for
Unit: None
distance based RRC redirection
Use this command to modify the
Value Range: 0 to 16383
RAN16.0 and later cell oriented parameters for
Unit: None
distance based RRC redirection
Use this command to modify the
Default Value: ON
RAN16.0 and later cell oriented parameters for
Unit: None
distance based RRC redirection
Use this command to modify the
Value Range: 0 to 255
RAN16.0 and later cell oriented parameters for
Unit: 3chip
distance based RRC redirection
Use this command to modify the
Default Value: 50
RAN16.0 and later cell oriented parameters for
Unit: %
distance based RRC redirection
Use this command to modify the
Default Value: 75
RAN16.0 and later cell oriented parameters for
Unit: %
distance based RRC redirection
Use this command to set the cell GUI Value Range: 0 to
RAN16.0 and later oriented parameters for distance 65535
based RRC redirection Unit: None
Use this command to set the cell
Default Value: ON
RAN16.0 and later oriented parameters for distance
Unit: None
based RRC redirection
Use this command to set the cell
Value Range: 0 to 255
RAN16.0 and later oriented parameters for distance
Unit: 3chip
based RRC redirection
Use this command to set the cell
Default Value: 50
RAN16.0 and later oriented parameters for distance
Unit: %
based RRC redirection

08/24/2023 华为保密信息,未经授权禁止扩散 第142页，共633页

 686970386.xls 文档密级

Use this command to set the cell

Default Value: 75
RAN16.0 and later oriented parameters for distance
Unit: %
based RRC redirection Value Range: Band1, Band2,
Band3, Band4, Band5,
Use this command to set the cell
Band6, Band7, Band8,
RAN16.0 and later oriented parameters for distance
Band9, DependOnNCell,
based RRC redirection
BandIndNotUsed
Use this command to set the cell Unit: None
Default Value: FALSE
RAN16.0 and later oriented parameters for distance
Unit: None
based RRC redirection
Use this command to set the cell
Value Range: 0 to 16383
RAN16.0 and later oriented parameters for distance
Unit: None
based RRC redirection
Use this command to set the cell
Default Value: ON
RAN16.0 and later oriented parameters for distance
Unit: None
based RRC redirection
Use this command to set the cell
Value Range: 0 to 255
RAN16.0 and later oriented parameters for distance
Unit: 3chip
based RRC redirection
Use this command to set the cell
Default Value: 50
RAN16.0 and later oriented parameters for distance
Unit: %
based RRC redirection
Use this command to set the cell
Default Value: 75
RAN16.0 and later oriented parameters for distance
Unit: %
based RRC redirection
Default Value:
Use thisthe
Modify command to set the of a
basic information PERFENH_RRC_REDIR_PR
RAN16.0 and later connection-oriented
cell, including Max transmit algorithm
OTECT_SWITCH: ON
parameters
power ofNum
of cell, an RNC of Unit: None
continuous in sync ind, Num of
Modify the basic information of a GUI Value Range: 0 to
continuous out of sync ind,
RAN16.0 and later cell, including Max transmit 65535
Radio link failure timer Length,
power of cell, Num of Unit: None
and the transmit power of the
continuous in sync
downlink common channels ind, Num of
continuous out of sync ind, Value Range: -100 to 500
RAN16.0 and later such as PSCH, SSCH, PCPICH
Radio
and BCH link failure timer Length, Unit: 0.1 dBm
and the transmit power of the
downlink common channels
Use this command to set the cell GUI Value Range: 0 to
such as PSCH,
RAN16.0 and later oriented parametersSSCH, forPCPICH
distance 65535
and
based BCH RRC redirection
If the intra-frequency load Unit: None
balancing algorithm or downlink-
Use this command to modify
RAN16.0 and later load-based dynamic pilot power NA
algorithm switches
adjustment algorithm of isa cell.
enabled
If
forthe intra-frequency
a cell load
in a power adjustment
balancing
associationalgorithm
group, the or MAE
downlink- GUI Value Range: 0 to
RAN16.0 and later modifies the pilot power ofpower
load-based dynamic pilot the 65535
adjustment
cell along algorithm
with is enabled
its maximum and Unit: None
If
forthe intra-frequency
a cell in a powertransmitload
adjustment
minimum
balancing P-CPICH
algorithm or MAE
downlink-
association
powers. group, the
load-based dynamic pilot Value Range: -100 to 500
RAN16.0 and later modifies the pilot power
Use this command to is ofpower
modifythethe
adjustment algorithm enabled Unit: 0.1dBm
cell
power along with its maximum
information a P- and
ofadjustment
for a
minimumcell in a power
P-CPICH transmit
CPICH.
association group, the MAE
powers. Value Range: -100 to 500
RAN16.0 and later modifies the
Use this command pilot power of thethe
to modify Unit: 0.1dBm
cell
power along with its maximum
information of a P- and
minimum
CPICH. P-CPICH transmit
powers.
Use this command to modify the
power information of a P-
CPICH.

08/24/2023 华为保密信息,未经授权禁止扩散 第143页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
Fixed-value
MAE does not parameters:
optimize theinclude
values theof these
parameters
parameters. for which the MAE provides built-in
default values that are displayed on the MAE
client and can be modified by users. The MAE
Fixed-value parameters:
delivers the fixed values ofinclude
thesethe parameters
parameters for which the MAE
based on the objects that are filtered provides built-in
according
default values that are
to algorithm requirements. displayed on the MAE
client and can be modified by users. The MAE
delivers the fixed values of these parameters
Identity-related parameters:
based on the objects that areinclude
filteredparameters
according
such as CellId, IDTYPE,
to algorithm requirements. MCC, and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE
Fixed-value delivers include
parameters: the fixedthe values of
these parameters
parameters for whichbased
the on
MAEtheprovides
objects that are
built-in
filtered according to algorithm requirements.
default values that are displayed on the MAE
client and can be modified by users. The MAE
Fixed-value parameters:
delivers the fixed values ofinclude
thesethe parameters
parameters for which the MAE
based on the objects that are filtered provides built-in
according
default values that are
to algorithm requirements. displayed on the MAE
client and can be modified by users. The MAE
delivers the fixed
Fixed-value values of
parameters: these parameters
includes the
based on theforobjects
parameters which that are filtered
the MAE provides according
built-in
to algorithm
default requirements.
values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters based on the objects that are
Non-MAE-optimized parameters:
filtered according to algorithm include the
requirements.
non-identity-related parameters that the MAE
does not optimize. The MAE obtains the values
of these parameters
Identity-related from NEs.
parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
Fixed-value
MAE does not parameters:
optimize theinclude
values theof these
parameters
parameters. for which the MAE provides built-in
default values that are displayed on the MAE
client and can be modified by users. The MAE
delivers the fixed values of these parameters
Identity-related parameters:
based on the objects that areinclude
filteredparameters
according
such as CellId, IDTYPE,
to algorithm requirements. MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE
Fixed-value delivers include
parameters: the fixedthe values of
these parameters
parameters for whichbased
the on
MAEtheprovides
objects that are
built-in
filtered according
default values thattoare
algorithm
displayed requirements.
on the MAE
client and can be modified by users. The MAE
delivers the fixed values of these parameters
Identity-related parameters:
based on the objects that areinclude
filteredparameters
according
such as CellId, IDTYPE,
to algorithm requirements. MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第144页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides built-in
default values that are displayed on the MAE
client and can be modified by users. The MAE
delivers the fixed values of these parameters
Identity-related parameters:
based on the objects that areinclude
filteredparameters
according
such as CellId, IDTYPE,
to algorithm requirements. MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
Fixed-value
MAE does not parameters: include
optimize the values theof these
parameters
parameters. for which the MAE provides built-in
default values that are displayed on the MAE
client and can be modified by users. The MAE
delivers the fixed values of these parameters
Identity-related parameters:
based on the objects that areinclude
filteredparameters
according
such as CellId, IDTYPE,
to algorithm requirements. MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which
filtered according the MAErequirements.
to algorithm provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters based on the objects that are
filtered according to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第145页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which
filtered according the MAErequirements.
to algorithm provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第146页，共633页

 686970386.xls 文档密级

Identity-related parameters: include parameters

such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Range-value
parameters. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude parameters
or on NEs.
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Identity-related
parameters. parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Range-value
parameters. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements.built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters based on the objects that are
filtered according to algorithm requirements.
–

08/24/2023 华为保密信息,未经授权禁止扩散 第147页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according to algorithm requirements.
parameters for which the MAE calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which
filtered according the MAErequirements.
to algorithm provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not
Fixed-value optimize the
parameters: valuesthe
includes of these
parameters.for which the MAE provides built-in
parameters
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirements and the value
Fixed-value parameters: range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters based on the objects that are
filtered according to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第148页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Range-value based on
parameters: the objects
include the that are
filtered according
parameters to algorithm
for which the MAErequirements.
calculates
optimization values according to algorithm
requirementsparameters:
Fixed-value and the value range the
includes of each
parameter on
parameters forthe MAEthe
which client
MAEorprovides
on NEs. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
Fixed-value parameters:
these parameters based includes the that are
on the objects
parameters for which the MAE provides
filtered according to algorithm requirements. built-in
default values that cannot be modified by
users. The MAE delivers the fixed values of
these parameters
Identity-related based on the
parameters: objects
include that are
parameters
filtered
such asaccording to algorithm
CellId, IDTYPE, MCC,requirements.
and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Range-value
parameters. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude parameters
or on NEs.
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
parameters.
Non-MAE-optimized parameters: include the
non-identity-related parameters that the MAE
does not optimize. The MAE obtains the values
of these parameters
Identity-related from NEs.
parameters: include parameters
such as CellId, IDTYPE, MCC, and the MOC
primary key and foreign key parameters. The
MAE does not optimize the values of these
Range-value
parameters. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE clientinclude
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
parameter on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第149页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

Indicates the device number of

– MOD RETSUBUNIT DEVICENO the RET. NodeB

Indicates the number of the RET

– MOD RETSUBUNIT SUBUNITNO NodeB
subunit, which starts from 1.

Indicates the antenna tilt of the

– MOD RETSUBUNIT TILT NodeB
RET subunit.
Indicates the device number of
the VRET antenna where the
– MOD VRETSUBUNIT DEVICENO VRET subunit is contained. The NodeB
device number of the VRET
antenna must be unique
Indicates the number of the
– MOD VRETSUBUNIT SUBUNITNO VRET subunit, which starts from NodeB
1

Indicates the uplink downtilt of

– MOD VRETSUBUNIT ULTILT NodeB
the VRET subunit.

Indicates the downlink downtilt of

– MOD VRETSUBUNIT DLTILT NodeB
the VRET subunit.

MOD Index type of the BTS. BYID: eNode

– IDTYPE
BTSRETSUBUNIT query by BTS index. B

MOD Index of the BTS, uniquely eNode

– BTSID
BTSRETSUBUNIT identifying a BTS in a BSC. B

MOD eNode
– DEVICENO Number of the RET antenna.
BTSRETSUBUNIT B

MOD Number of the RET antenna eNode

– SUBUNITNO
BTSRETSUBUNIT subunit. B

MOD Antenna tilt angle configured for eNode

– TILT
BTSRETSUBUNIT the RET subunits. B

– LST UMMMRCTRL – – RNC

– LST UMRCTRL – – RNC

Indicates the device number of

– DSP RETSUBUNIT DEVICENO NodeB
the RET.

Indicates the number of the RET

– DSP RETSUBUNIT SUBUNITNO NodeB
subunit, which starts from 1.

08/24/2023 华为保密信息,未经授权禁止扩散 第150页，共633页

 686970386.xls 文档密级

Indicates the device number of

DSP
– DEVICENO the RET. NodeB
RETDEVICEDATA

DSP Indicates the number of the RET

– SUBUNITNO NodeB
RETDEVICEDATA subunit, which starts from 1.

Indicates the number of the

– DSP AARU CN cabinet where the AARU is NodeB
located.
Indicates the number of the
– DSP AARU SRN subrack where the AARU is NodeB
located.

Indicates the slot number of the

DSP AARU SN NodeB
AARU.
Indicates the device number of
the VRET antenna where the
– DSP VRETSUBUNIT DEVICENO VRET subunit is contained. The NodeB
device number of the VRET
antenna must be unique.
Indicates the number of the
– DSP VRETSUBUNIT SUBUNITNO VRET subunit, which starts from NodeB
1

DSP Index type. BYNAME: query by

– IDTYPE NodeB
BTSRETSUBUNIT name; BYID: query by index.

DSP Index of the BTS, uniquely

– BTSID NodeB
BTSRETSUBUNIT identifying a BTS in a BSC.

DSP
– DEVICENO Number of the RET antenna. NodeB
BTSRETSUBUNIT

DSP Number of the RET antenna

– SUBUNITNO NodeB
BTSRETSUBUNIT subunit.

DSP
Index type. BYNAME: query by
BTSRETDEVICEDAT IDTYPE NodeB
name; BYID: query by index.
A
DSP
Index of the BTS, uniquely
– BTSRETDEVICEDAT BTSID NodeB
identifying a BTS in a BSC.
A
DSP
– BTSRETDEVICEDAT DEVICENO Number of the RET antenna. NodeB
A
DSP
Number of the RET antenna
– BTSRETDEVICEDAT SUBUNITNO NodeB
subunit.
A

08/24/2023 华为保密信息,未经授权禁止扩散 第151页，共633页

 686970386.xls 文档密级

Operation MAE Value Range and

Version
Description Unit

Use this command to GUI Value Range: 0 to

RAN16.0 and later modify an RET 125
subunit. Unit: None
Use this command to
GUI Value Range: 1 to 8
RAN16.0 and later modify an RET
Unit: None
subunit.
Use this command to
Value Range: 0 to 80
RAN16.0 and later modify an RET
Unit: 0.1 degree
subunit.
Use this command to
GUI Value Range:
modify a remote
RAN16.0 and later 60~254
electrical tilting (RET)
Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 1~8
RAN16.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
GUI Value Range: -
modify a remote
RAN16.0 and later 150~150
electrical tilting (RET)
Unit: 0.1degree
subunit.
Use this command to
GUI Value Range: -
modify a remote
RAN16.0 and later 150~150
electrical tilting (RET)
Unit: 0.1degree
subunit.
Use this command to
Default Value: BYID(By
modify a remote
eRAN7.0 and later Index)
electrical tilting (RET)
Unit: None
subunit.
Use this command to
GUI Value Range:
modify a remote
eRAN7.0 and later 0~7999
electrical tilting (RET)
Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 0~35
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 1~8
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
GUI Value Range: -
modify a remote
eRAN7.0 and later 100~300
electrical tilting (RET)
Unit: None
subunit.
Use this command to
different
RAN16.0 and later query RNC parameters –
application
related type of
to the
RNC levelof
collecting MR switch.
measurement reports
RAN16.0 and later used in network –
performance analysis,
network
Use this planning,
command to
network
query optimization,
a remote
RAN16.0 and later and call history –
electrical tilting (RET)
analysis.
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第152页，共633页

 686970386.xls 文档密级

Use this command to

query the dynamic
RAN16.0 and later information in the –
remote electrical tilting
Use
(RET)this command
device data. to
query the dynamic
RAN16.0 and later information in the –
remote electrical tilting
(RET)
Use device
this commanddata. to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
RAN16.0 and later –
electrical tilting (RET)
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第153页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE
parameters.
calculates optimization values
according to algorithm requirements
Identity-related parameters: include
and the value range of each parameter
parameters such as CellId, IDTYPE,
on the MAE client or on NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according toparameters:
Fixed-value algorithm requirements
includes the
and the value
parameters forrange
whichoftheeach
MAE parameter
provides
on the MAE
built-in defaultclient or on
values NEs.
that cannot be
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and to
thealgorithm requirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
–

08/24/2023 华为保密信息,未经授权禁止扩散 第154页，共633页

 686970386.xls 文档密级

08/24/2023 华为保密信息,未经授权禁止扩散 第155页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description
Ec/No threshold
HO of triggering the
Unique ID of a
parameter MOD UINTRAFREQNCELL CellId inter-frequency RNC
cell
Ec/No threshold
optimization measurement
of triggering
for CS services. the
HO inter-frequency
When Ec/No is
parameter MOD UINTRAFREQNCELL RNCId ID of an RNC
measurement RNC
used as the
optimization for
Ec/No PS threshold
non-
measurement
HSPA
of services.
quantity for the
triggering
HO
When
CIO ofEc/No
inter-frequency
inter-frequencya is
parameter MOD UINTRAFREQNCELL CIOOffset RNC
used as
neighboring
measurement
handovers of the cell.
optimization
measurement
for
CS HSPA
services, the
HO quantity
services.
UE reports for
When
Unique
inter-frequency ID of a
parameter MOD UINTERFREQNCELL CellId Ec/No
event is used
2D if the RNC
cell
handovers of
optimization as the
measured
PS non-HSPA
measurement
Ec/No value is
HO services, the
parameter MOD UINTERFREQNCELL RNCId
quantity
lower
ID of an than for
RNC theUE RNC
reports
inter-frequency
value of this event
optimization 2D if the of
handovers
parameter.
HO measured
HSPA
Unique
Then, the services,
RNC RNC ID
parameter MOD UINTERFREQNCELL NCellRncId Ec/No
the
of a
sends aUE value
reports
neighboring is RNC
optimization lower
cell than
event
signaling 2D if the the
value
measured
message to of this
HO parameter.
Ec/No
CIO of value
instruct athe UE is
parameter MOD UINTERFREQNCELL CIOOffset Then,
lower the
than RNC
the RNC
neighboring
to start the cell.
optimization sends
value a this
of
compressed
HO MOD signaling
parameter.
mode
Uniqueand
message
Then, the IDto thea
of
RNC
parameter UCELLINTERFREQHOCO CellId inter-frequency RNC
cell
instruct
sends athe UE
optimization V measurement.
The threshold of
to start
signaling
Events the
2D and
HO MOD the reserved
compressed SF
InterFreqCSThd2D message
2Fused
is are used for
to to
parameter UCELLINTERFREQHOCO mode
instruct and the the
UE RNC
EcN0 start
judging and stop
the
optimization V inter-frequency
to start the
the
uplink compressed
credit
measurement.
compressed
mode,for TTI
HO MOD state
InterFreqR99PsTh mode
Events and
respectively. 2D the and
parameter UCELLINTERFREQHOCO switchover RNC
d2DEcN0 2F are
inter-frequency
The threshold used
largerWhen theto
optimization V decision.
The of
start and
measurement.
value of stop
this isSF
HO MOD uplink
the credit
reserved
the compressed
Events 2D and
InterFreqHThd2DE parameter,
lower
is used
mode, than for the the
parameter UCELLINTERFREQHOCO 2F
easierare itused
is to to RNC
cN0 threshold,
judging
respectively. the the
optimization V start
start and
the stop
credit
uplink
The
the state
credit
larger
compressed of
the
compressed
TTI
state switchover
for TTI
Parameter value
UlTtiCreditSfResTh mode,
mode. ofThe this
MOD UNODEBLDR algorithm
switchover
parameter,
respectively. istheset RNC
check d smaller the
to restricted.
decision.
easier it will
larger When be
the
The
value
The logical
of
smaller this cell
the
uplink
to start
value
ID credit
of
uniquely the
this is
Parameter parameter,
parameter
lower than the
value
the
MOD UCELLLDR CellId compressed
parameter,
identifies
more the
a cell RNC
check is,
mode.thedifficult
threshold,
easier easier
itThewill thebe
it
in
will
the a beradio
creditto start
state
credit
smaller
to start
network. state the
the of
the
is
TTI setcompressed
to
switchover
Parameter value
UlTtiCreditSfResTh compressed
mode. ofTothis
MOD UCELLLDR restricted.
algorithm
Indicates
parameter,
mode. The isThe
the set
the RNC
check d reduce
threshold the
to
morerestricted.
minimum
smaller theofthe
difficult
probability
of it
reserved
The
number
is to
value smaller
stop
of SF
ofthe
this CEs is
the
Parameter CERSVFOR2MSU frequently
converted
parameter
for admitting
compressed
parameter, to
value
the2
SET NODEBALGPARA starting
credit
is, the by and
easier DCH NodeB
check SER ms
mode.
more users when
Tothe it
difficult
stopping
consumption
the
CE credit state
Number
reduce
is to stop ofthe
the
compressed
law.
is set to
Overbooking
Parameter
RABs
probability
compressed
UlLdrBERateRedu restricted.
mode,
selected
increase of is
MOD UNODEBLDR enabled.
in a ULTo
frequently
mode. LDR The BE RNC
check ctionRabNum the difference
threshold of the
traffic
starting
reduce rate and
the
between
reserved the
SF
reduction.
stopping
probability
event 2D the of is
converted
compressed
frequently to
threshold
credit by and
DCH
mode,
starting
event 2F increase
and
consumption
the difference
stopping the
threshold.
law.
08/24/2023 华为保密信息,未经授权禁止扩散 between the
compressed 第156页，共633页
event 2D
mode, increase
threshold
the difference and
event 2F the
between
 configured
credit
local
Allocate load
cell IDs at
is
the
heavy,
are RNC. users
configured
Method. The
Radio
RNC
arethe
at sends
RNC. the
assembled
resources
cell ID toHSDPA
in priority the
order
686970386.xls indicate
base
among
The station
RNC all the 文档密级
available power
during
NodeBs
supports
resources anda cell
and
a a
setup
Number
part ofresources.
maximum
code ofof are
users
procedure.
RABs
selected
5100 forThe
selected
logical
Parameter UlLdrBERateRedu Code
mapping
Priority:
MOD UCELLLDR in
LDR
Thea UL
action
cells.logical LDR
Logical
code inBE
cell RNC
check ctionRabNum between logical
traffic
order
ID rate
to
uniquely
cells are reduce
resource priority
cell IDs group
reduction.
the cell
identifies
uniquely
allocation anda cell
but not
Parameter local
level
in a
scheme cell
credit
radio
necessarily IDs
mainly load.
MOD UNODEBALGOPARA NodeBId NodeB
are ID.
configured RNC
check 4. IUB_OLC
network.
consecutively
applies toThe
at the
(Iub
logical
numbered
scenarios RNC.
Overload
cellwhere ID is
congestion
configured
within
power a RNC. at
Parameter NodeBLdcAlgoSwit The RNC
MOD UNODEBALGOPARA control
the
For RNC.
example,
resources are The RNC
check ch supports a the
algorithm):
RNC
you sends
can
limited. Inset
maximum
When
cell
ID ofIDathe
scenarios to of
the
logicalwhere
MOD 5100
NodeB logical
Parameter base 0 andload
cell tostation
power Iub
UCELLALGOSWITCH CellId cells.
is Logical
Overload, RNC
check during
that of
resources a cell
another are
cells
users
setup
logical
Whether are
are
not limited, cell toto this 2.
MOD uniquely
assembled
procedure.
enable
scheme the butThe
lowers innot
Parameter NBMLdcAlgoSwitc necessarily
priority
mapping
For clear orderand
UCELLALGOSWITCH algorithms
the system RNC
check h consecutively
among
between
easy to alllogical
the
related
throughput. cell
numbered
NodeBs
cell IDs
identification,
load control
Power and
and
Priority: a
Parameter SET within
part
local
adhere a
The power are
ofcell RNC.
users
to IDs
the
RSCALLOCM For
are example,
selected
configured
following for Olc NodeB
check ULOCELLMACHSPARA resource priority
you
action
at the can
numbering
allocation in set
RNC. order the
ID
to of a logical
reduce
principles:
scheme the
mainly
Parameter cell
NodeB
The to
appliesRNC 0 and
Iub
to load.
MOD UCELLSELRESEL CellId The logical cell RNC
check that
5. of
Whether
supports
Specify
scenarios another
awhere
differentto
ID
The uniquely
logical cell
minimum to 2.
activate
maximum
number
code the of
ranges
resources
identifies a cell
required
NodeB-credit-
5100
for
are logical
logical
limited. quality
cells
In
Parameter in
Fora radio
clear and
MOD UCELLSELRESEL Qqualmin threshold
Hysteresis
based
cells.
in CLB
Logical
different
scenarios where(Cell RNC
check network.
easy The
corresponding
value
Load
cells
subracks. of
Balance)
are
code resources the For
logical cellEc/No
identification,
to ID is
areCPICH
serving
algorithm.
uniquely
example, cell
not limited,
configured butWith
you in
atnot
Parameter adhere
idle
this
this mode to the
algorithm,
necessarily
can specify
scheme when the
MOD UCELLSELRESEL IdleQhyst1s the RNC. The
Hysteresis
following RNC
check QualMeas
the RNC
consecutively
range
lowers ofthe 0 is set
to
RNC
value
numberingsends
of the the
to
initiates
numbered
899
system fortothe inter-
cell ID
serving
principles: cellthein
CPICH_RSCP(
frequency
within
logical
throughput.a RNC.
cells in
Parameter base
idle station
mode when
MOD UCELLSELRESEL IdleQhyst2s CPICH
handovers
For example,
subrack
Balance RSCP).
0 if RNC
check during
QualMeas
Specify adifferent
cellis set
NodeB
you
(MPS)
between
setup canand credit
set
Code thethe
to
number ranges
load
ID
and of
range is
a of
Power:
procedure. higher
logical
900 The to
The
CPICH_ECNO(
for logical cells
Parameter than
cell
1799 tothe0
for
power-code
mapping value
and
the
MOD UCELLCAC CellId CPICH
in different Ec/N0). RNC
check of
that
logicalof another
Threshold
balanced
between cells for
logical in
subracks.
"UlCreditCSClb
logical
subrack
admission
scheme cell1 For
avoidsto 2.
cell IDs and
example, you
TrigThd"
(EPS).
based
exhaustion
local onFor or
cell IDsthethe of
Parameter can specify
"UlCreditPSClb
For clear
check
MOD UCELLCAC DlCellTotalThd detailed
total
either
are typeand
downlink
configured of RNC
range
TrigThd"
easy
information
power
resources, of 0into the
at
899the for RNC.the
"ADD
identification,
about
resources
Threshold this
improves the in
for
Parameter logical
UNODEBCLB"
adhere
parameter,
HSDPA
admitting
resource cells
to the
cells
an
use seein
MOD UCELLCAC DlConvAMRThd The
subrackRNC 0 RNC
check command.
following
3GPP
AMR TSaand
voice
efficiency
supports By
(MPS)
doing
numbering
25.401.
service
improves andthe
this, the
the
Threshold
maximum for
of
range
Threshold
NodeB
principles:of
cell capacity. 900
credit for to
admitting a
Parameter DlConvNonAMRTh 5100
1799
admitting
load
logical
for the
can bea
MOD UCELLCAC conversational
cells. Logical RNC
check d logical
service
reduced.
Specify cells
other
different in
non-AMR
cells are
subrack
than
6. Whether 1
number
service
uniquely
(EPS).
conversationalFor buttonot
ranges
Parameter activate
for logical
necessarily the cells cell-
MOD UCELLCAC DlOtherThd detailed
AMR services,
group-credit-
in different RNC
check consecutively
information
conversational
based
subracks. CLBFor (Cell
Maximum
numbered
about
non-AMR thisyou
Load
example,
number Balance)
ofand
Parameter within
parameter,
services, a RNC. see
MOD UCELLCAC algorithm.
DlTotalEqUserNum can specify
downlink With the RNC
check For
3GPP example,
handover TS
this
range algorithm,
equivalent
you of 0
can setusers to the
25.401.
services
the
ID aofRNC
899
in for
cell. the
a logical
Parameter initiates
logical
cell to 0cells inter-
andin
MOD UCELLRLPWR CellId frequency
subrack 0 RNC
check that of another
handovers
(MPS) and
logical cell to ifthe2.
credit load
range of 900 in to a
cell group
1799 for theis
For clear and
higher than
logical the
easy cells in
value
subrack of
identification, 1
08/24/2023 华为保密信息,未经授权禁止扩散 "UlCreditCSClb
(EPS).
adhere For to the 第157页，共633页
TrigThd"
following in the
detailed
"ADD
information
numbering
UNODEBCLB"
about
principles:this
 Whether
supports
ms services, the
load
in
DB-HSDPA
E_FACH
HSUPA reshuffling
a radio TTI 10
is
msperformed
network.
feature isThe
but
services, by
does
using
logical
allowed
not
andaffect R99load-
cell
forthe ID is
based inter-
686970386.xls configured
HSDPA
establishment
services.
frequency
When at of 文档密级
the
services.
the
serving RNC.
the MIMO The
a When
large
handovers,
RNC
this
cell.
number sends
switch of isBE the
service
cell
turned
4.
users, ID the
DTX_DRX:torate
on, the the
Meaning:
reduction,
Parameter base
DB-HSDPA
When
system station
thecannot
MOD UCELLRLPWR CNDomainId Identifying
uncontrollable the RNC
check during
feature
switch
guarantee a
isis cell
on, that
type
real-time of a CN
setup
allowed
DTX_DRX
all usersfor can can
service
procedure.
Meaning:
HSDPA
be
access QoSThe
configured
the
Parameter renegotiation,
mapping
MOD UCELLRLPWR MaxBitRate Maximum
services.
for
network the HSPA with bit the RNC
check and
rate CS/PS
between
14.
service.
highest logical
of aservice
service
inter-RAT
cell
Minimal
5.
bearer IDs and
CFG_HSPA_DT transmit
Parameter handovers.
local
powercell
X_DRX_SWITC
HS_SCCH_LES
supported of IDsa by
MOD UCELLRLPWR RlMinDlPwr LCG_CREDIT_
are configured RNC
check H:
downlinkWhen
S_OPERATION
UEs. Thisthe radio
LDR_SWITCH:
at
:switch
link the RNC.
When istheon,
controls
PerfEnhanceSwitc Whether
DTX_DRX
switch
whether to can
is the
on,
Parameter enable
The
be RNC the
configured local
SET UCORRMPARA h HS-SCCH
RNC allocates Less RNC
check cell
supports
for group
the HSPA a credit
Operation
corresponding can
load
maximum
service.
be control
configured
channels of
for
algorithm
5100
15.
for
newthe logical
HSPA
users on a
Parameter
SET ULDCALGOPARA LdcSwitch per
cells. RNC
basedLogical
CFG_HSPA_H
service. on thebasis. RNC
check
When
cells
6. are
SSCCH_LESS_ the credit
cell capability
load
uniquely
OP_SWITCH:of a but
DL_L2ENHANC
reported local not
Uplink
cell group GBR is of
Parameter necessarily
When
ED:
through Whenthe thethe
SET UUSERGBR UlGBR the
heavy, BE and
load PTT RNC
check consecutively
switch
NodeB is on,
private
services
reshuffling is
numbered
HS-SCCH
interface. Less
DL_L2ENHANC
performed
Downlink
within
Operation
ED
When a
canthis RNC.GBR
becan by
Parameter using load-
SET UUSERGBR DlGBR of
For
be the BE
example,
configured
configured
switch and
is turned for RNC
check based inter-
PTT
you
for
the the
on, HSDPA services
the RNCthe
can HSPAset
frequency
ID of a logical
service.
dynamically
Power handovers,
cell
16.
7.
selects to 0an andBE
MOD UCELL CellId service rate RNC
optimization that of
CFG_HSUPA_1
64QAM_MIMO:
appropriate another
reduction,
logical
6QAM_SWITC
When
uplink the cell to 2.
service
uncontrollable
TX
H:
switch power
When
bearer is the
on of the
Power According and toandthe
MOD UCELL PCPICHPower real-time
For
P-CPICH
switch
the clearis and
in
on, a RNC
optimization R8 protocol, for
switches
allocates
service
easy
cell.
16QAM
64QAM
corresponding QoS
can be
and
MIMO and
renegotiation,
identification,
configured
MIMO
channels are for for
on,
64QAM can be
Capacity SET and
adhere
the
new CS/PS
HSUPA
64QAM+MIMOusers to the to
CfgSwitch used together. RNC
expansion UCORRMALGOSWITCH inter-RAT
following
service.
can
maximize bethe the
When
handovers.
numbering
17.
configured
system
condition isfor
capacity not
LC_CREDIT_L
principles:
CFG_HSUPA_
the
based HSDPA on the
Capacity MOD met,
Indicates for the
HspaPlusSwitch DR_SWITCH:
This
DC_SWITCH:
service
actual parameter
NodeB RNC
expansion UCELLALGOSWITCH example
Channel the cell
Quality
Whether
specifies
Specify
When
8. this
UL_16QAM:
processing to
which
different
does not
Indicator(CQI)
enable
HSPA
number
switch
When the
is
the
specifications. ranges
turnedlocal
support
Adjust the
Algorithm
cell
on, credit
technologies
for logical
thethis DC- load
cells
Capacity MIMOor64QAMSwi switch
When
features,
Switch is
of on,
MIMO
non-
SET UFRC control
can
in
HSUPA
16QAM be
differentretried
function
can be RNC
expansion tch switch
may be
Conversationalis turned
not
algorithm
by
off,UEs.
subracks.
can be
configured
the on
When
enabled fora
For
used
Service. togetherNot
per
the
example,
for
the RNC basis.
HSPA
HSUPA
HSUPA
optimization you In
with
CQI 64QAM.
Adjust
Capacity When
technologies
can
services.
service.
process the
specify credit
the
SET UFRC RetryCapability this case,is CQI
Algorithm: RNC
expansion load
are
range
18.
9. of of
DC_HSDPA:
disabled. a
selected 0local
to
"MIMOor64QA
correction is not
cell
and
899 is
forheavy,
currently
CFG_IMS_SUP
When thetheisCQI
MSwitch"
performed.
load
UE isreshuffling
not using
Capacity SET CQIADJALGOFNO logical
PORT_SWITCH
switch
used
Adjusted
is
them,
to cells
is
performed
"RNC" by inDC
on,
by
will
This
subrack
: When
can
determine parameter
be the 0 NodeB
expansion ULOCELLMACHSPARA NCON IBLER:
using
initiate CQI
load-
these
has
(MPS)
switch the
configured
whether
correction and
is same
on
MIMO the
isforand
based
HSPA
content
range inter-
of as900
the
or 64QAMIMS
HSDPA
performed
frequency
technologies
licenseforto
is
Feature DlLdrFirstAction
1799
is for
activated,
service.
preferentially
non- the the
MOD UCELLLDR DlLdrFourthAction This RNC
optimization Theparameter
handovers,
.retry
logical
RNC
10.
used. for UE.BE
selected
cells
supports
conversational in
has
service
actions,the ratesame
subrack
IMS 1based
signaling.
UL_L2ENHANC
services
content
reduction,
however, as should
(EPS).
19.
ED:the
on When For
fixed the
Feature DlLdrFirstAction
uncontrollable
be unique.
MOD UCELLLDR DlLdrFifthAction detailed
This
switch parameter
CFG_LOSSLES is on, RNC
optimization .IBLER.
The
real-time The
selected
information
has thewill
S_DLRLC_PDU
UL_L2ENHANC
IBLER same
actions,
service QoS
about
content
SIZECHG_SWI
ED can
converge thisas
be to this
however,
renegotiation, should
Feature parameter,
DlLdrFirstAction
TCH:
configured
target Whether
value. see
for
MOD UCELLLDR DlLdrSixthAction be
and unique.
CS/PS RNC
optimization 3GPP
.the
The TS
selected
UTRAN
HSUPA
inter-RAT
25.401. the
actions,
supports
service.
handovers.
however,
function ofshould
11.
be unique.
lossless
EDPCCH_BOO RLC
PDU size
STING: When
change.
the switch When is on,
08/24/2023 华为保密信息,未经授权禁止扩散 this switchcan
Boosting is be 第158页，共633页
turned on, for
configured
downlink
the HSUPA
channel
service.
 686970386.xls 文档密级
This parameter
has the same
content as
Feature DlLdrSeventhActio DlLdrFirstAction
MOD UCELLLDR This RNC
optimization n . Theparameter
selected
has the same
actions,
content
however,asshould
Feature DlLdrFirstAction
be unique.
MOD UCELLLDR DlLdrEighthAction This RNC
optimization . Theparameter
selected
has the same
actions,
content
however,asshould
Feature DlLdrFirstAction
be unique.
MOD UCELLLDR DlLdrNinthAction This RNC
optimization . Theparameter
selected
has the same
actions,
content
however,asshould
Feature DlLdrFirstAction
be unique.
MOD UCELLLDR DlLdrTenthAction RNC
optimization . The selected
actions,different
Action
however,
from that should
Feature DlLdrEleventhActio This parameter
be unique.
MOD UCELLLDR specified by RNC
optimization n has the same
DlLdrFirstAction
meaning
. as
DlLdrFirstAction
Feature The
MOD UCELLLDR DlLdrTwelfthAction . Thefollowing
selected RNC
optimization parameter
actions,
Whether
however,to
values should
enable
represent
HO_INTER_FR
be unique. the
Feature MOD NBMLdcAlgoSwitc
algorithms
different
EQ_HARD_HO policies RNC
optimization UCELLALGOSWITCH h
related
for to cell
selecting
_SWITCH:
load control
users
When to
thebe
Feature MOD NbmLdcUeSelSwit handedisover
switch in
on, the RNC
optimization UCELLALGOSWITCH ch the
RNCload-based
is allowed
inter-frequency
to initiate inter-
handovers
frequency
HO_ALGO_LD
Feature SET involved in load
HoSwitch measure
R_ALLOW_SH control RNC
optimization UCORRMALGOSWITCH reshuffling
or the load-
O_SWITCH:
(LDR)
based the
When
Whether triggered
inter-
to
Feature SET by basic
frequency
switch isLDR-
perform on,hard
the
HoSwitch congestions
handover upon RNC
optimization UCORRMALGOSWITCH LDR inter-
triggered
the handover
frequency
measurement-
decision
handover
based on
inter-is
Feature InterFreqLDHOMet inter-frequency
allowed during
MOD UCELLLDR frequency RNC
optimization hodSelection load.
soft handover.
handover or
LDR-triggered
Feature blind
DL LDR inter-
first
MOD UCELLLDR DlLdrFirstAction This parameter
frequency RNC
optimization action
has the same
handover
content as
Feature DlLdrFirstAction
MOD UCELLLDR DlLdrSecondAction This RNC
optimization . Theparameter
selected
has the same
actions,
content
however,asshould
Feature DlLdrFirstAction
Period
be unique. of
MOD UCELLLDR DlLdrThirdAction RNC
optimization . The selected
starting LDR. If
actions,
preliminary
however, should
congestion
Feature betheunique.
SET ULDCPERIOD LdrPeriodTimerLen occurs,
If DLLDRloadis RNC
optimization
periodically
state of the cell
performed
is lasted longer to
Feature reduce
than this the
Flag of a cell cell
on
MOD UCELLLDM DlLdTrnsHysTime load. the the RNC
optimization threshold,
which
DL load state of
DRD(Direct
the cell
Retry Decision)
Feature transfers
MOD UINTERFREQNCELL DrdOrLdrFlag measurement or RNC
optimization
LDR(Load
Reshuffling)
measurement is
performed

08/24/2023 华为保密信息,未经授权禁止扩散 第159页，共633页

 Whether to
enable the
power balancing
686970386.xls DRD
Whether algorithmblind- 文档密级
Whether
DCH to
handover-based
for
enable
non-periodic
services. theDuring
power
DRD isbalancing
allowed
Feature BlindDrdExceptHR service
DRD
setup
algorithm
or
SET UMCDRD after the
reconfiguration, RNC
optimization etrySwitch for HSDPA
measurement-
this algorithm
services.
based periodic
enables theDuring
Feature service
DRD
Unique
RNC to ID of aor
setup
algorithm
MOD UCELLDRD CellId reconfiguration,
takes effect. RNC
optimization cell.
preferentially
this
set up algorithm
services
enables
in cells with the
Feature LdbDRDSwitchDC RNC to
MOD UCELLDRD DRD
more
The rollback
available
logical cell RNC
optimization H preferentially
enhancement
downlink
ID uniquely power
set up
RNC_RBSETU
switch.
resources services
When
identifies
in cells with a cell
Feature P_DRD_FAIL_
LdbDRDSwitchHS this
based
in a parameter
radioon the
MOD UCELLDRD more
ROLLBACK_S
is set
power available
to
resource RNC
optimization DPA network. The
power
WITCH
ON(ON),
usage in (RB the
the
Load
logical
resources threshold
cell ID is
Establishment
RNC
current
for HSDPA
configuredcontinues
cell at and
UEs
Feature LdbDRDLoadRem DRD based
receiving on
Rollback
inter-frequency the
and
MOD UCELLDRD to
the trigger
power RNC. resourcepower
The RNC
optimization ainThdHSDPA Switch)
processing
neighboring the
balancing
RNC
usage sends
inswitch
theDRDthe
Whether
1: This
configuration
cells.
in the Then, load
downlink. is
cell ID
RNC_RBRECF
current to the
cellDRD and
balancing
Offset
turned
failure
power of
on. The
Feature base station
G_DRD_FAIL_
inter-frequency
MOD UCELLDRD LdbDRDChoice is based
remaining
BSC6910
The logical
messages
resources onare
load
cell
sent RNC
optimization during
ROLLBACK_S
neighboring a cell
power
between
supports
ID
by or
uniquely
the UE
balanced aonin the
setup
WITCH
cells. Then,(RB
user number.
target
rollback
identifies
source
among cell
cell aand
caused
inter- cell
after
procedure. The
Feature LdbDRDOffsetHSD Reconfiguration
power
the
by
in
the a current
failed
radio
activation
frequency
mapping DRDs cell
cells.
SET UDRD DRD
resources Rollback are RNC
optimization PA that
of
timeRB isarrives
network.
between used The for
logical
Switch)
balanced
the load-
establishment.
logical
during
cell IDsthe cell
andDRD ID is
1: This
among
balancing
0: This switch
inter-
switch DRD is
is
configured
procedure. at
Feature PROCESSSWITC localturned
frequency
of HSDPA
cellon. IDs The
cells.
SET URRCTRLSWITCH turned
the
When
are RNC. off.
this
configured The
The RNC
optimization H2 BSC6910
Ratio
services of the
BSC6910
RNC
parameter
at the sends
RNC. does
isthe
set
supports
number
cell
to ID toofthe
notOFF(OFF),
support
rollback
HSDPA
rollback caused
users
caused
Feature PROCESSSWITC base the
The RNC
RNCstation uses
SET URRCTRLSWITCH by
for
by failed
load
failed DRDs RNC
optimization H2 during
new
supports a cell
ain a
directed
RB retry
balancing
of
setup
configurations
maximum of
decisions
cell with
establishment. the
procedure.
after
5100 the
logical The
Feature (DRDs) of RB
SET UDPUCFGDATA DrdRollBackSwitch HSDPA
However,
mapping
activation
cells.
load
Logical
reconfiguration.
the
time RNC
optimization balancing
RNC
between cannot DRD
logical
arrives
cells
0: This are and
switch is
algorithm
Direct
control
cell
does IDs retry
not the
and based
uniquely
turned
on the
switch off.
number
group.but Thenot
Feature scenario
local
receive cellorwhere
IDs
MOD UCELLCAC LoadBalanceRatio necessarily
BSC6910
of users.
DR_RAB_SING
the
are RB fast
configured
process The
the
does RNC
optimization consecutively
not support
load
setup
at value
_DRD_SWITCH RNC.is is
the function
configuration
numbered
rollback
calculated caused
(DRD
used
failure
within
switch
for
a RBusing
RNC.
for
Feature SET by
the failed
singleHSDPA RAB):
establishment DRDs load
DrSwitch The
For RNC
messages
example, sent RNC
of RB
balancing
optimization UCORRMALGOSWITCH When
accompanied
supports
by
you the
can
the
UE aDRD
set in by
the
the
reconfiguration.
algorithm
switch
DRDs. iscell. based
on,
maximum
source
ID of of
on
DRD
5100
Note:thea is logical of
values
logical
The
Feature cell to 0
LoadBalanceRa
performed and for
MOD UCELLLDM CellId cells.
activation Logical time RNC
optimization that
tio of
and
single another
service if
cells
logical are
ensurescell that to the
2.
MaxHsdpaUser
retry
uniquely
UE, is required.
NodeB, but not
and
Threshold
Num. for
Feature necessarily
RNC
For clear use and new
MOD UCELLLDM DlLdrTrigThd triggering RNC
optimization consecutively
configurations
easy
downlink LDR
numbered
at the same
identification,
Threshold
within
time when
adhere ato RNC. for
the
the
Feature
MOD UCELLLDM DlLdrRelThd stopping
For
UE example,
data
following RNC
optimization
downlink
you can set
configurations
numbering LDR the
ID of
stored a
principles: logical
on the
Power cell
RNCtoside 0 and are
MOD UAICHPWROFFSET CellId RNC
optimization that of
modified.
Specify another For
different
logical
numbercell
Difference
details, see
ranges to 2.
between
3GPP TS
for logical cells the
Power For clearpower and
MOD UAICHPWROFFSET AICHPowerOffset transmit
25.331.
in different RNC
optimization easy
of an AICHFor
subracks. and
identification,
that of PCPICH.
example, you
adhere
can specify to the the
following
range of 0 to
numbering
899 for the
08/24/2023 华为保密信息,未经授权禁止扩散 principles:
logical cells in 第160页，共633页
subrack 0
Specify
(MPS) and different
the
number
range ofranges 900 to
 base station
necessarily
during a cell
consecutively
setup
numbered
procedure.
within a RNC. The
686970386.xls 文档密级
mapping
For example,
between
you can set logical the
cell
ID ofIDs and
a logical
Power local
cell tocell0 and IDs
MOD UPICHPWROFFSET CellId are configured RNC
optimization that of
PERFENH_RL_ another
at the RNC.
logical
RECFG_SIR_C
Difference cell to 2.
ONSIDER_SWI
between the
Power The RNC
For clear and
MOD UPICHPWROFFSET PICHPowerOffset TCH:
transmit This power RNC
optimization supports
easy a
check
of PICH
Maximum box and
maximum
identification,
controls
that of PCPICH. of
number
Indicates
5100 logicalofthe users
Feature SET adhere
whether
Indicates the
supported to the the
by
ULOCELLID power
following
BSC6910 margin
cells. Logical NodeB
optimization ULOCELLMACHSPARA Local
the Cell ID.
HSDPA
reserved
cells are for
numbering
considers the
channel.
R99
uniquelychannels. The
but notIt
principles:
converged
user in this
Parameter SET specifies
necessarily
SIRTarget the value
PWRMGN parameter NodeB
check ULOCELLMACHSPARA power
consecutively
Specify
that is to
useddifferent
Indicates
refers
percentage the
the
numbered
number
before
maximum ranges
radio link
user
relative
within with
a to
RNC. the
Parameter SET for
powerlogical
reconfiguration
services used cells
oncell for
the
EXTRAPOWER maximum
For
in example,
different
outer loop NodeB
check ULOCELLMACHSPARA scheduled
HSDPA
transmit power.users
you
power
after can
subracks.
the set
control For the
channel,
ID of a logical
example,
performed
PERFENH_HR
scheduling.
regardless you
after
Parameter cell
can
radio to 0 andofthe
specify
link
NTI_OPT_SWIT
MOD UCELLCAC CellId the number of RNC
check that
Timer
range of another
for
of
reconfiguration.
CH: Whether 0not to on
RABs
logical carried
cell
releasing
899
If
thethe
HRNTI for
check
HSDPA the tobox
adopts 2.
Parameter MaxHsdpaUserNu signaling
logical
is
an not cells
selected,
optimized
channel. over in
MOD UCELLCAC For clear0and
Iu-PS
subrack
the BSC6910
algorithm. When RNC
check m Maximum
easy
interface
(MPS)
sends
this
HSDPA and
the
switch when
user the
initial
is
identification,
no
rangePS
SIRTarget
turned RAB
of
on, 900 isto
value
the
number
adhere tocannotthe
Parameter IuPSRelNoRABTm set
1799
used up.
hamming
exceed for
afterAfter
the this
the radio
SET USTATETIMER following RNC
check r timer
logical
link
distance expires,
PERFENH_P2D
HSDPA cells in
numbering
the RNC
subrack
reconfiguration
between
_FAIL_RETRY_ 1 sends
the
capability
principles: of the
a
to RANAP
(EPS). For
the NodeB.If
HRNTI
SWITCH:
NodeB product,IU
Parameter PerfEnhanceSwitc RELEASE
SET UCORRMPARA detailed
the check
identifiers
Whether
In practice, a box
UEtheis is RNC
check h Specify
REQUEST different
information
selected,
distributed
allowed
value can to theby
be
number
message
about
BSC6910
the
accessRNC thisanranges
isto the
inter-
set
for based
logical on
cells
Parameter PerfEnhanceSwitc CN.
parameter,
selects
equal a
celltotype
frequency
the more
orco- see
SET UNBMPARA in
3GPPdifferent
appropriateTS cell RNC
check h larger
coverage
and the than 4,
subracks.
25.401.
value
which
using from
effectively
DRD For
the
or
richness
example, ofyou the
initial
avoids
channel
availableSIRTarget
incorrect
fallback
Parameter PerfEnhanceSwitc Maximum
can
value specify
used
demodulation. TX the
after
SET UCORRMPARA after
HSDPA P2D power state RNC
check h1 power
range
radio
When of
of
link
this 0the to
transition
and code
PCPICH
899
switch foristhe
reconfiguration
admission infails.
turned a
Feature resources.
cell.
logical
and
off,
When This
thethisTXin
the cells
optimization/ Minimum
MOD UPCPICHPWR MaxPCPICHPower parameter
subrack
Whether
converged
hamming
switch is0turned
to RNC
Power power of the
defines
(MPS)
enable
SIRTarget andthe
the the
optimization distance
off,
PCPICHthe UE
maximum invaluea
Feature range
algorithms
used
between
remains of
before 900
the
in theto
cell. This
coverage area
optimization/ 1799
related
radio
HRNTI
CELL_PCH fortothe
link cell
MOD UPCPICHPWR MinPCPICHPower parameter
of a cell. RNC
Power logical
load cells
control.
reconfiguration.
identifiers
state in
defines theP2D
after
optimization subrack
Selecting
Then the by
distributed
state 1
transition a
minimum
(EPS).
switch
BSC6910
the RNC
admission For
enables sends
isarea
fails.
Feature MOD NBMLdcAlgoSwitc coverage
detailed
the
equal selected
to or RNC
optimization UCELLALGOSWITCH h of a cell.
information
corresponding
value
larger to
than the1.
about
algorithm
NodeB. this and
Setting
Feature parameter,
clearing
Unique
of this check IDa ofsee a
ADD UCELLLICENSE CellId 3GPP
switch TS
disables RNC
optimization cell.
Whether
box takes effect the
25.401.
the
license
only when function the
corresponding
switch
PC_RL_RECFG for Load
Feature algorithm.
ADD UCELLLICENSE FuncSwitch2 Based
_SIR_TARGET Dynamic RNC
optimization
Adjustment
_CARRY_SWIT of
PCPICH
CH checkisbox is
Feature enabled.
selected.
Unique ID of a
MOD UCELLLICENSE CellId RNC
optimization cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第161页，共633页

 parameter
cell is is set
primary
to
considered
common pilot as
DOMINANTCEL
the dominant
channel
L forduring
a cell, (P- this
686970386.xls cell
CPICH)
cell
P-CPICHis power joint
power
文档密级
adjustment
considered
Whether thein as
adjustment
algorithm. This
the
the dominant
license
configuredfunction
algorithm
cell
switch during for area, joint
Load
Feature coverage
adjusts thepower P-
MOD UCELLLICENSE FuncSwitch2 P-CPICH
Based
and Dynamic
periodically RNC
optimization CPICH
adjustment transmit in
Adjustment
checks whether of
power
the
PCPICH by
configured isthe
its co-coverage
downlink non-
Feature MOD NBMLdcAlgoSwitc coverage
enabled.
neighboring area,
HSPA
The
and power
logical cell
periodically RNC
optimization UCELLALGOSWITCH h cells and itself
load
ID to
uniquely
checks reduce
whether
require
theco-coverage
downlink P-
identifies
its a cell
Feature ADD CPICH
non-HSPA
Unique power
ID of a
CellId in a radio
neighboring RNC
optimization UCELLCOVAREAMAP Coverage
adjustment.
power
cell. load. areaIn
If
network.
cells and The
itself
ID.
the
this The
same
algorithm
logical
require cell
P-area, ID is
coverage
takes effect, area
configured
CPICH power at
Feature ADD ID
only
otheruniquely
one
enabled cell
CoverageAreaId the RNC.
adjustment. The RNC
optimization UCELLCOVAREAMAP identifies
among intra-
algorithms a In
RNC
the samesendsfor the
coverage
frequency
intra-frequency area
cells
cell ID to the
coverage area,
in a radio
can be
Feature ADD LdbPcpichPwrAdjLi load
base
only
network.
balancing
station
one cell
configured
(based on as
TCP RNC
optimization UCELLCOVAREAMAP nkageAtrb during
among aintra-
cell
the
or domiant
RTWP) cells cell.
setup
frequency
Coverage
Otherwise,area
automatically cells
procedure.
can On aThe
becoverage
Feature MOD LdbPcpichPwrAdjLi name.
in the
become
mapping invalid.
configured
Coverage
network
area can that
only as
area RNC
optimization UCELLCOVAREAMAP nkageAtrb In the
between TCP- logical
the
ID.
UEs domiant
The
perform are P- cell.
prone
based
cell IDsintra-
Otherwise,
coverage
to camp and
on,areacells
if
CPICH
frequency power load
Feature local
in
ID
the the cell
coverage
uniquely IDs
ADD UCOVERAGEAREA CoverageAreaId adjustment
balancing RNC
optimization are
area configured
identifiescan only
CoverageAreaId a
independently.
algorithm, this
at the RNC.
perform
coverage
parameter P-area
parameter
CPICH
in a radio
indicates power
Feature CoverageAreaNam When
specifies thisthe ID
the
ADD UCOVERAGEAREA The
of the RNC
adjustment
network. cell that RNC
optimization e parameter
intra-frequency is set
supports
independently.
the UE campsa
to
load balancing
maximum
on, the of
PASSIVECELL
period. In the
Feature RMV 5100
When
coverage
Unique logical
thisIDthisarea
of a
CellId for a cell,
Coverage
algorithm area
for RNC
optimization UCELLCOVAREAMAP cells.
parameter
name
cell. Logical
is also is set
cell
ID. is
The
load-based
cells
to
named areas the
considered
coverage
dynamic area as a
uniquely
PASSIVECELL
name of cell but
cell not
Feature passive
ID uniquely
adjustment of
RMV UCOVERAGEAREA CoverageAreaId necessarily
for a cell,
that thejoint UE P-this RNC
optimization during
identifies
PCPICH, athis
consecutively
cell is on.
Downlink
camps non-
CPICH
coverage
parameter power area
numbered
considered
HSPA power as a
adjustment,
in a radio
specifies the and
Feature within
passive
load a
status
IntraFreqLdbPeriod determines RNC.
cell
SET ULDCPERIOD network.
load-based
For
during
based example,
joint
on whichP- RNC
optimization TimerLen whether
Downlink tonon-
dynamic
you
Step
CPICH
the can
at power
downlink- set
which the
perform
HSPA P-
adjustment
ID
the a power
ofCPICH
adjustment,
load-based logical and
CPICH
load power
Feature period
cell
power tostatus
determines
dynamic of
0is and
P-
MOD UCELLLDB CellId adjustment
based RNC
optimization PCPICH.
that
adjusted
whether
CPICH of on another Ifwhich
each
to
power a
based
the
cell on
downlink-
isThis
heavily
logical
time.
perform
adjustment cellP- to 2.
inidcation
load-based
loaded, thesent
parameter
CPICH power isP-
Feature PCPICHPowerPac algorithm
from
dynamic
CPICH the P-
MOD UCELLLDB For
used
adjustment
decreases fortransmit
clear and
load- the RNC
optimization e dominant
CPICH
power power cell.
easy is
based
P-CPICH dynamic
on
adjustment
periodically
identification,
pilot
transmit power
inidcation sent
power.
When this
Feature PcpichPwrDownDl algorithm
reduced
adhere
adjustment
from
When
parameterthethe tosothe that
and
is set
MOD UCELLLDM increases
UEs
following
TCP-basedin non- the P- RNC
optimization LoadState dominant
downlink
to OFF for cell.
a
CPICH
connected
numbering
intra-frequency
HSPA transmit
power
cell,
power.
mode this
can Whencell be
principles:
When
load balancing.
this
status in a
Feature does
PcpichPwrUpDlLoa the
more not
downlink
easily
MOD UCELLLDM parameter
cell
performis the joint set
is
same P- RNC
optimization dState non-HSPA
handed
Specify
to
as OFF
or worse over
different
for a
Capacity CPICH power
power
from
number
cell,
than this
the load
theranges cell
status to
expansion/Fe adjustment in
status
another
for
does logical
indicated notincell.aby cell
cellsthe
ature the configured
DSP LICUSAGE – –
is
in the same
different
perform
value of joint
this asP- RNC
optimization/ coverage area.
Capacity or better
subracks.
CPICH power
parameter, thanFor
this
Parameter
expansion/Fe the statusyou
example,
adjustment
algorithm in
check
ature Indicates
indicated
can specify
the configured the
bythe the
the
DSP LICENSE FUNCTIONTYPE decreases NodeB
optimization/ function
value
range
coverage
P-CPICH of type.
this
of 0area. to
Parameter parameter,
899 for the
transmit power this
check algorithm
logical
by the step. in
cells
increases
subrack 0 the P-
CPICH
(MPS) and transmit the
power
range of 900 by the to
08/24/2023 华为保密信息,未经授权禁止扩散 step.
1799 for the 第162页，共633页
logical cells in
subrack 1
(EPS). For
 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to modify

GUI Value Range: 0 to 65535
RAN16.0 and later the information about an intra-
Unit: None
frequency neighboring cell
Use this command to modify
GUI Value Range: 0 to 4095
RAN16.0 and later the information about an intra-
Unit: None
frequency neighboring cell
Use this command to modify
Value Range: -20 to 20
RAN16.0 and later the information about an intra-
Unit: 0.5 dB
frequency neighboring cell
Use this command to modify
GUI Value Range: 0 to 65535
RAN16.0 and later the information about an inter-
Unit: None
frequency neighboring cell.
Use this command to modify
GUI Value Range: 0 to 4095
RAN16.0 and later the information about an inter-
Unit: None
frequency neighboring cell.
Use this command to modify
GUI Value Range: 0 to 4095
RAN16.0 and later the information about an inter-
Unit: None
frequency neighboring cell.
Use this command to modify
Value Range: -20 to 20
RAN16.0 and later the information about an inter-
Unit: 0.5 dB
frequency neighboring cell.
Use this command to modify
parameters in the cell-oriented
GUI Value Range: 0 to 65535
RAN16.0 and later coverage-based inter-frequency
Unit: None
handover measurement
Use this command to modify
algorithm.
parameters in the cell-oriented
Default Value: -12
RAN16.0 and later coverage-based inter-frequency
Unit: dB
handover measurement
Use this command to modify
algorithm.
parameters in the cell-oriented
Default Value: -12
RAN16.0 and later coverage-based inter-frequency
Unit: dB
handover measurement
Use this command to modify
algorithm.
parameters in the cell-oriented
Value
DefaultRange:
Value: 8SF4(8SF4),
-12
RAN16.0 and later coverage-based inter-frequency7SF4(7SF4), 6SF4(6SF4),
Unit: dB
handover measurement 5SF4(5SF4), 4SF4(4SF4),
algorithm. 3SF4(3SF4), 2SF4(2SF4),
Use this command to modify
SF4(SF4), SF8(SF8),
RAN16.0 and later NodeB load reshuffling (LDR)
SF16(SF16), SF32(SF32),
algorithm parameters.
SF64(SF64), SF128(SF128),
Use this command to modify SF256(SF256)
Value Range: 8SF4(8SF4),
GUI Value
Default Range:
Value: 2SF40 to 65535
RAN16.0 and later cell load reshuffling (LDR) 7SF4(7SF4), 6SF4(6SF4),
Unit:
Unit: None
None 4SF4(4SF4),
algorithm parameters. 5SF4(5SF4),
3SF4(3SF4), 2SF4(2SF4),
Use this command to modify
SF4(SF4), SF8(SF8),
RAN16.0 and later cell load reshuffling (LDR)
SF16(SF16), SF32(SF32),
algorithm parameters.
SF64(SF64), SF128(SF128),
SF256(SF256)
Value Range: 1 to 8
The command is used to modify 2SF4
RAN16.0 and later Default Value: 4
NodeB algorithm parameter. Unit: None
Use this command to modify Value Range: 1 to 10
RAN16.0 and later NodeB load reshuffling (LDR) Default Value: 3
algorithm parameters. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第163页，共633页

 686970386.xls 文档密级

Use this command to modify Value Range: 1 to 10

RAN16.0 and later cell load reshuffling (LDR) Default Value: 3
algorithm parameters. Unit: None

Use this command to modify GUI Value Range: 0 to 65535

RAN16.0 and later
NodeB algorithm parameters. Unit: None

Default Value:
Use this command to modify
RAN16.0 and later NODEB_CREDIT_LDR-1
NodeB algorithm parameters.
Unit: None

Use this command to modify GUI Value Range: 0 to 65535

RAN16.0 and later
algorithm switches of a cell. Unit: None

Default Value:
Use this command to modify
RAN16.0 and later CELL_CREDIT_LDR-1
algorithm switches of a cell.
Unit: None

The command is used to modify Default Value: CODE_PRI

RAN16.0 and later
the Mac-hs parameters. Unit: None

Modify cell selection and GUI Value Range: 0 to 65535

RAN16.0 and later
reselection information. Unit: None

Value Range: -24 to 0

Modify cell selection and
RAN16.0 and later Default Value: -18
reselection information.
Unit: dB
Use this command to modify Value Range: 0 to 20
RAN16.0 and later cell selection and reselection Default Value: 2
information Unit: 2dB
Use this command to modify Value Range: 0 to 20; 255
RAN16.0 and later cell selection and reselection Default Value: 1
information Unit: 2dB
Use this command to modify
cell-oriented Call Admission GUI Value Range: 0 to 65535
RAN16.0 and later
Control (CAC) algorithm Unit: None
parameters.
Use this command to modify
Value Range: 0 to 100
cell-oriented Call Admission
RAN16.0 and later Default Value: 90
Control (CAC) algorithm
Unit: %
parameters.
Use this command to modify
Value Range: 0 to 100
cell-oriented Call Admission
RAN16.0 and later Default Value: 80
Control (CAC) algorithm
Unit: %
parameters
Use this command to modify
Value Range: 0 to 100
cell-oriented Call Admission
RAN16.0 and later Default Value: 80
Control (CAC) algorithm
Unit: %
parameters
Use this command to modify
Value Range: 0 to 100
cell-oriented Call Admission
RAN16.0 and later Default Value: 75
Control (CAC) algorithm
Unit: %
parameters
Use this command to modify
Value Range: 1 to 200
cell-oriented Call Admission
RAN16.0 and later Default Value: 80
Control (CAC) algorithm
Unit: None
parameters
Use this command to modify
GUI Value Range: 0 to 65535
RAN16.0 and later transmit power parameters of
Unit: None
the DL link in a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第164页，共633页

 686970386.xls 文档密级

Use this command to modify

RAN16.0 and later transmit power parameters of NA
the DL link in a cell.
Use this command to modify
RAN16.0 and later transmit power parameters of NA
the DL link in a cell.
Use this command to modify Value Range: -350 to 150
RAN16.0 and later transmit power parameters of Default Value: -150
the DL link in a cell. Unit: 0.1dB
Default Value:
Use this command to set the
PERFENH_CELL_HSUPA_CA
RAN16.0 and later connection-oriented algorithm
P_CHANGE_OPT_SWITCH-1
parameters of an RNC.
Unit: None
Default Value:
Use this command to set RNC NODEB_CREDIT_LDR_SWITC
RAN16.0 and later Oriented Load Control
The guaranteed bit rate (GBR) H-1;
Algorithm
of servicesParameter.
cannot be LC_CREDIT_LDR_SWITCH-1
Value Range: D0, D8, D16,
guaranteed in case of limited Unit: None
D32, D64, D128, D144, D256,
coverage or severely limited D384, D608, D1280, D2048,
RAN16.0 and later The guaranteed bit rate (GBR) Value
resources such as Iub D2720,Range:
D5440D0, D8, D16,
of services cannot
bandwidths, be
CEs, downlink D32, D64, D128,
Default Value: D32D144, D256,
guaranteed in case
codes, downlink power, of limited
and D384, D512,
Unit: kbit/s D768, D1024,
coverage or severely limited D1536, D1800, D2048, D3600,
RAN16.0 and later uplink power.
resources such as Iub D7200, D8640, D10100,
bandwidths, CEs, downlink D13900, D16000, D21000
codes, downlink power, and Default Value: D32
Modify the basic information of GUI
Unit:Value
kbit/s Range: 0 to 65535
RAN16.0 and later uplink power.
a cell. Unit: None

Modify the basic information of Value Range: -100 to 500

RAN16.0 and later
a cell. Unit: 0.1dBm
Default Value:
Use this command to set the
CFG_HSDPA_64QAM_SWITC
RAN16.0 and later connection-oriented algorithm
H-1
parameters of an RNC.
Unit: None
Default Value: 64QAM-1;
Use this command to modify
RAN16.0 and later DL_L2ENHANCED-1
algorithm switches of a cell.
Unit: None
Use this command to set the
RNC-Oriented Fundamental Default Value: 64QAM
RAN16.0 and later
Resource Configuration (FRC) Unit: None
parameters.
Use this command to set the
RNC-Oriented Fundamental Default Value: 64QAM-1
RAN16.0 and later
Resource Configuration (FRC) Unit: None
parameters. Value Range: NoAct,
Use this command to modify
Default Value: BERateRed,
InterFreqLDHO,
the CQI Adjust Algorithm Switch
RAN16.0 and later CQI_ADJ_BY_DYN_BLER
QoSRenego,
of non-Conversational Service.
Unit: None
CSInterRatShouldBeLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
Use this command to modify InterFreqLDHO,
AMRRateRed, BERateRed,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Unit: None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR)
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters.
CSInterRatShouldNotLDHO,
Unit: None
PSInterRatShouldNotLDHO,
PSInterU2LLDHO,
WAMRSfReconfiguration
Unit: None
08/24/2023 华为保密信息,未经授权禁止扩散 第165页，共633页
 Value Range: NoAct,
InterFreqLDHO, BERateRed,
686970386.xls 文档密级
QoSRenego,
CSInterRatShouldBeLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
Use this command to modify InterFreqLDHO,
AMRRateRed, BERateRed,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value
Unit: Range: NoAct,
None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value
Unit: Range: NoAct,
None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value
Unit: Range: NoAct,
None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Unit: None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR)
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters.
CSInterRatShouldNotLDHO,
Unit: None
PSInterRatShouldNotLDHO,
Use this command to modify Default Value: DL_UU_LDR-1
PSInterU2LLDHO,
RAN16.0 and later
algorithm switches of a cell. Unit: None
WAMRSfReconfiguration
Unit: None
Default Value:
Use this command to modify
RAN16.0 and later NBM_LDC_MATCH_UE_ONLY
algorithm switches of a cell.
Unit: None
Default Value:
Use this command to set the
HO_INTER_FREQ_HARD_HO
RAN16.0 and later connection-oriented algorithm
_SWITCH-1
switches of a RNC.
Unit: None
Default Value:
Use this command to set the
HO_ALGO_LDR_ALLOW_SHO
RAN16.0 and later connection-oriented algorithm
_SWITCH-1
switches of a RNC.
Unit:
ValueNone
Range: NoAct,
Use this command to modify Value Range: BLINDHO,
InterFreqLDHO, BERateRed,
RAN16.0 and later cell load reshuffling (LDR) MEASUREHO
QoSRenego,
algorithm parameters. Unit: None
CSInterRatShouldBeLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
Use this command to modify InterFreqLDHO,
AMRRateRed, BERateRed,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Value Range: NoAct,
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify InterFreqLDHO, BERateRed,
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR) QoSRenego,
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters. CSInterRatShouldBeLDHO,
CSInterRatShouldNotLDHO,
Unit: None
PSInterRatShouldBeLDHO,
PSInterRatShouldNotLDHO,
Use this command to modify
AMRRateRed,
PSInterU2LLDHO,
RAN16.0 and later cell load reshuffling (LDR)
MBMSDecPower, CodeAdj,
WAMRSfReconfiguration
algorithm parameters.
CSInterRatShouldNotLDHO,
Unit: None
Use this command to set RNC- PSInterRatShouldNotLDHO,
Default Value: 10
PSInterU2LLDHO,
RAN16.0 and later oriented load control (LDC)
Unit: s
WAMRSfReconfiguration
algorithm cycle length
Unit: None
Use this command to modify
Default Value: 1000
RAN16.0 and later threshold parameters related to
Unit: ms
cell load decision.
Use this command to modify
Default Value: TRUE
RAN16.0 and later the information about an inter-
Unit: None
frequency neighboring cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第166页，共633页

 686970386.xls 文档密级

Use this command to set RNC-

Default Value: ON
RAN16.0 and later oriented DRD algorithm
Unit: None
parameters.
Use this command to modify
the Cell-Oriented Directed Retry GUI Value Range: 0 to 65535
RAN16.0 and later
Decision (DRD) algorithm Unit: None
parameters of a cell.
Use this command to modify
the Cell-Oriented Directed Retry Default Value: OFF
RAN16.0 and later
Decision (DRD) algorithm Unit: None
parameters of a cell.
Use this command to modify
the Cell-Oriented Directed Retry Default Value: ON
RAN16.0 and later
Decision (DRD) algorithm Unit: None
parameters of a cell.
Use this command to modify
the Cell-Oriented Directed Retry Default Value: 100
RAN16.0 and later
Decision (DRD) algorithm Unit: %
parameters of a cell.
Use this command to modify
the Cell-Oriented Directed Retry Default Value: UserNumber
RAN16.0 and later
Decision (DRD) algorithm Unit: None
parameters of a cell.
Use this command to set the
RNC-oriented Directed Retry Default Value: 10
RAN16.0 and later
Decision (DRD) algorithm Unit: %
parameters.
Default Value:
Use this command to set RNC_RBSETUP_DRD_FAIL_R
RAN16.0 and later
process switches. OLLBACK_SWITCH-1
Unit: None
Default Value:
Use this command to set RNC_RBRECFG_DRD_FAIL_R
RAN16.0 and later
process switches. OLLBACK_SWITCH-1
Unit: None
Set DPU(Data Process Unit) Default Value: ON
RAN16.0 and later
configuration parameters. Unit: None
Use this command to modify
Value Range: 0 to 100
cell-oriented Call Admission
RAN16.0 and later Unit: %
Control (CAC) algorithm
parameters.
Default Value:
Use this command to set the
DR_RAB_SING_DRD_SWITCH
RAN16.0 and later connection-oriented algorithm
-1
parameters of an RNC.
Unit: None
Use this command to modify
GUI Value Range: 0 to 65535
RAN16.0 and later threshold parameters related to
Unit: None
cell load decision.
Use this command to modify
Value Range: 0 to 100
RAN16.0 and later threshold parameters related to
Unit: %
cell load decision.
Use this command to modify
Value Range: 0 to 100
RAN16.0 and later threshold parameters related to
Unit: %
cell load decision.
Use this command to modify
GUI Value Range: 0 to 65535
RAN16.0 and later the power offset information of
Unit: None
the AICH in a cell.
Use this command to modify
Value Range: -9 to 5
RAN16.0 and later the power offset information of
Unit: dB
the AICH in a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第167页，共633页

 686970386.xls 文档密级

Use this command to modify

GUI Value Range: 0 to 65535
RAN16.0 and later the power offset information of
Unit: None
the PICH in a cell.
Use this command to modify
Value Range: -10 to 5
RAN16.0 and later the power offset information of
Unit: dB
the PICH in a cell.

The command is used to modify Value Range: 0 to 268435455

RAN16.0 and later
the Mac-hs parameters. Unit: None

Value Range: 0 to 100

The command is used to modify
RAN16.0 and later Default Value: 3
the Mac-hs parameters.
Unit: %
Value Range: 0 to 40
The command is used to modify
RAN16.0 and later Default Value: 4
the Mac-hs parameters.
Unit: 0.25dB
Use this command to modify
cell-oriented Call Admission GUI Value Range: 0 to 65535
RAN16.0 and later
Control (CAC) algorithm Unit: None
parameters.
Use this command to modify
Value Range: 0 to 192
cell-oriented Call Admission
RAN16.0 and later Default Value: 96
Control (CAC) algorithm
Unit: None
parameters.
Use this command to set the Value Range: 1 to 65535
RAN16.0 and later state protection timers of calling Default Value: 10
process. Unit: s
Default Value:
Use this command to set the
PERFENH_RL_RECFG_SIR_C
RAN16.0 and later connection-oriented algorithm
ONSIDER_SWITCH-1
parameters of an RNC.
Unit: None
Default Value:
Use this command to set the
PERFENH_HRNTI_OPT_SWIT
RAN16.0 and later cell-oriented algorithm
CH-1
parameters of an RNC.
Unit: None
Default Value:
Use this command to set the
PERFENH_P2D_FAIL_RETRY
RAN16.0 and later connection-oriented algorithm
_SWITCH-1
parameters of an RNC.
Unit: None
Use this command to modify
Value Range: -100 to 500
RAN16.0 and later the power information of a P-
Unit: 0.1dBm
CPICH.
Use this command to modify
Value Range: -100 to 500
RAN16.0 and later the power information of a P-
Unit: 0.1dBm
CPICH.
Default Value:
Use this command to modify
RAN16.0 and later INTRA_FREQUENCY_LDB-1
algorithm switches of a cell.
Unit: None

Use this command to add GUI Value Range: 0 to 65535

RAN16.0 and later
function control items in a cell. Unit: None
Default Value:
Use this command to add LOAD_BASED_PCPICH_PWR
RAN16.0 and later
function control items in a cell. _ADJ-1
Unit: None
Use this command to modify GUI Value Range: 0 to 65535
RAN16.0 and later
function control items in a cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第168页，共633页

 686970386.xls 文档密级

Default Value:
Use this command to modify LOAD_BASED_PCPICH_PWR
RAN16.0 and later
function control items in a cell. _ADJ-1
Unit: None
Default Value:
Use this command to modify DLLOAD_BASED_PCPICH_P
RAN16.0 and later
algorithm switches of a cell. WR_ADJ_SWITCH-1
Unit: None
Use this command to add the GUI Value Range: 0 to 65535
RAN16.0 and later
coverage area ID for a cell. Unit: None

Use this command to add the Value Range: 0 to 65535

RAN16.0 and later
coverage area ID for a cell. Unit: None
Value Range: OFF,
DOMINANTCELL,
Use this command to add the
RAN17.0 and later PASSIVECELL
coverage area ID for a cell.
Unit: None
Value Range: OFF,
DOMINANTCELL,
Use this command to modify
RAN17.0 and later PASSIVECELL
the coverage area ID for a cell.
Unit: None

Use this command to add the Value Range: 0 to 65535

RAN16.0 and later
coverage area. Unit: None

Value Range: 1 to 64
Use this command to add the
RAN16.0 and later characters
coverage area.
Unit: None

Use this command to delete the GUI Value Range: 0 to 65535

RAN16.0 and later
coverage area ID for a cell. Unit: None

Use this command to delete the Value Range: 0 to 65535

RAN16.0 and later
coverage area. Unit: None

Use this command to set RNC- Value Range: 1 to 115300

RAN16.0 and later oriented load control (LDC) Unit: s
algorithm cycle length.
Use this command to modify
GUI Value Range: 0 to 65535
RAN16.0 and later cell-oriented Load Balance
Unit: None
(LDB) algorithm parameters.
Use this command to modify
Value Range: 0 to 100
RAN16.0 and later cell-oriented Load Balance
Unit: 0.1dB
Value Range:
(LDB) algorithm parameters.
DL_LIGHT_STATE,
Use this command to modify DL_NORMAL_STATE,
RAN16.0 and later threshold parameters related to DL_LOADED_STATE,
cell load decision. Value Range:
DL_HEAVY_STATE,
DL_LIGHT_STATE,
DL_OVERRLOAD_STATE
Use this command to modify DL_NORMAL_STATE,
Unit: None
RAN16.0 and later threshold parameters related to DL_LOADED_STATE,
cell load decision. DL_HEAVY_STATE,
DL_OVERRLOAD_STATE
Use this command to query the
Unit: None
RAN16.0 and later allocated values and license –
usage of operators

Use this command to list the

RAN16.0 and later –
license file information.

08/24/2023 华为保密信息,未经授权禁止扩散 第169页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users.
Fixed-value The MAE
parameters: delivers
include the the
fixed values for
parameters of these
which parameters
the MAE provides based
on the objects
built-in that arethat
default values filtered according
are displayed
to
onalgorithm
the MAE requirements.
client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
by users. The MAE delivers the fixed
values of these parameters based on the
objects that are filtered according to
algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第170页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign
Fixed-value parameters:The
key parameters. MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第171页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters: include

the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does
Fixed-value not optimize.
parameters: The the
include MAE
obtains the values
parameters for which of these
the MAE parameters
provides
from NEs.
built-in default values that are displayed
on the MAE client and can be modified
by users. The
Fixed-value MAE delivers
parameters: the fixed
includes the
values of these
parameters parameters
for which the MAE based on the
provides
objects default
built-in that arevalues
filteredthat
according
cannot be to
algorithmby
modified requirements.
users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users.
Fixed-value The MAE
parameters: includedelivers
the the
fixed values for
parameters of these
which parameters
the MAE provides based
on the objects
built-in that arethat
default values filtered according
are displayed
to
onalgorithm
the MAE requirements.
client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId,
objects that are filtered according toIDTYPE,
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm
Fixed-valuerequirements
parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters
on the objectsforthat
which arethe MAEaccording
filtered provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values ofparameters:
Range-value these parameters includebased
the
on the objects
parameters forthat
which arethe
filtered
MAEaccording
calculates
to algorithm requirements.
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第172页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm
Fixed-valuerequirements
parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs.values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values ofparameters:
Range-value these parameters
includebased
the
on the objects
parameters forthat arethe
which filtered
MAEaccording
calculates
to algorithm requirements.
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements
Fixed-value parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs.values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based
on the objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第173页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign
Fixed-value parameters:The
key parameters. MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE
on the objects that are filtered accordingprovides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values ofparameters:
Range-value these parametersincludebased
the
on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
to algorithm requirements.
optimization values according to
algorithm
Fixed-valuerequirements
parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第174页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the
range of each parameter on the MAE MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId,
objects that are filtered according toIDTYPE,
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. includeMAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The
Fixed-value MAE delivers
parameters: the fixed
includes the
values of these
parameters parameters
for which the MAE based on the
provides
objects default
built-in that arevalues
filteredthat
according
cannot be to
algorithmby
modified requirements.
users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters:
of these parametersincludesbased
the
parameters for which the MAE
on the objects that are filtered according provides
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values ofparameters:
Range-value these parameters includebased
the
on the objects
parameters forthat
which arethe
filtered
MAEaccording
calculates
to algorithm requirements.
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements
Fixed-value parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: includebased
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
values theofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: includebased
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第175页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.
–

08/24/2023 华为保密信息,未经授权禁止扩散 第176页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter
Indicates Description
the length of the UE NE
Type
inactivity timer. If the eNodeB
detects that a UE has neither
Parameter MOD received nor sent data for a
UeInactiveTimer eNodeB
check RRCCONNSTATETIMER duration
Indicatesexceeding the value
the timer value of
of this 300.
Timer parameter, the eNodeB
For details, see
releases
Indicates
3GPP TSthe
the RRC
local connection
36.331. ID of the
Parameter for the UE.is started
MOD UETIMERCONST LocalCellId cell.
This Ittimer
uniquely identifies
whenathe cell eNodeB
check
within
UE sendsa BS.
RRCConnectionRequest.
Parameter
MOD UETIMERCONST T300 eNodeB
check Before the timer expires, it is
stopped if the UE receives
RRCConnectionSetup
Indicates or of
the timer value
Parameter RRCConnectionReject.
MOD UETIMERCONST T301 Timer 301. For details, see eNodeB
check
3GPP TS 36.331.
After the timer expires, the UE
Parameter enters thethe
Indicates RRC_IDLE
length of state.
timer
MOD UETIMERCONST T311 eNodeB
check 311.

Parameter MOD Indicates the length of timer

T302 eNodeB
check RRCCONNSTATETIMER T302.

Indicates the local ID of the

Parameter
MOD CELLPDCCHALGO LocalCellId cell. It uniquely identifies a cell eNodeB
check
within a BS.
Indicates the number of OFDM
Parameter
MOD CELLPDCCHALGO InitPdcchSymNum symbols initially
Indicates occupied
the switch by
used to eNodeB
check
the PDCCH.
enable or disable dynamic
adjustment on the number of
Parameter orthogonal frequency division
MOD CELLPDCCHALGO PdcchSymNumSwitch eNodeB
check multiplexing (OFDM) symbols
occupied by the physical
Indicates the timer
downlink control governing
channel
MOD
Parameter S1MessageWaitingTi the period
(PDCCH). the eNodeB will wait
ENODEBCONNSTATETI eNodeB
check mer for a response message from
MER
the MME.
MOD Indicates the timer for the
Parameter
ENODEBCONNSTATETI SecCmpWaitingTimer eNodeB to wait for a Security eNodeB
check
MER Mode Complete message.
Indicates the timer for the
MOD
Parameter UpUeCapInfoWaitingT eNodeB to wait for an
ENODEBCONNSTATETI eNodeB
check imer unprotected UE Capability
MER
Information message.
Indicates the timer governing
MOD
Parameter UuMessageWaitingTi the period the eNodeB will wait
ENODEBCONNSTATETI eNodeB
check mer for a response message from
MER
a UE.
MOD Indicates the timer for the
Parameter WaitRrcConnSetupC
ENODEBCONNSTATETI eNodeB to wait for an RRC eNodeB
check mpTimer
MER Connection Setup Complete.
Indicates the timer governing
MOD
Parameter X2MessageWaitingTi the period the eNodeB will wait
ENODEBCONNSTATETI eNodeB
check mer for a response message from
MER
the neighboring eNodeB.
Parameter MOD Indicates the ID of the
RlcPdcpParaGroupId eNodeB
check RLCPDCPPARAGROUP RLC/PDCP parameter group.

08/24/2023 华为保密信息,未经授权禁止扩散 第177页，共633页

 686970386.xls Indicates the eNodeB-specific 文档密级
maximum number of RLC
ARQ retransmissions, namely
the maximum number of AM
Parameter MOD ENodeBMaxRetxThre Indicates
PDU retransmissions.When
the UE-specific eNodeB
check RLCPDCPPARAGROUP shold the numbernumber
maximum of retransmissions
of RLC
reaches
ARQ the value of this
retransmissions, namely
parameter,
the maximum eNodeB
number willof AM
Parameter MOD release the user.
UeMaxRetxThreshold PDU retransmissions.When eNodeB
check RLCPDCPPARAGROUP
the number of retransmissions
reaches the value of this
Indicates
parameter, the local IDwill
eNodeB of the
Parameter
MOD RACHCFG LocalCellId cell. It uniquely
release the user. identifies a cell eNodeB
check
within a BS.
Indicates the maximum step by which the
number
TX power of for
preamble
random access
Parameter
MOD RACHCFG PreambleTransMax transmission
preambles is times.For
increased details each eNodeB
check
aboutafter
time this aparameter,
RACH access see
3GPP TSmultiple
failure.If 36.321.attempts to
Parameter access the PRACH fail, the UE
MOD RACHCFG PwrRampingStep eNodeB
check increases the TX power for
random access preambles by
HO & MOD a step specified
Indicates the local byID thisof the
Reselection EUTRANINTRAFREQNC LocalCellId parameter
cell. It uniquely eachidentifies
time aftera an cell eNodeB
optimization ELL accessafailure
within BS. to ensure
successful access.
HO & MOD Indicates the mobile country
Reselection EUTRANINTRAFREQNC Mcc code of the E-UTRAN eNodeB
optimization ELL Indicates
neighboring thecell.
eNodeB identity
of the intra-frequency
HO & MOD Indicates thecell.
neighboring mobile network
It uniquely
Reselection EUTRANINTRAFREQNC Mnc code of the
identifies anE-UTRAN
eNodeB within a eNodeB
optimization ELL Indicates
neighboring
PLMN. The the28-bit
local E-UTRAN
cell. identity of
the intra-frequency
cell identity is comprised of the
HO & MOD neighboring cell.the
It uniquely
cell identity
Indicates the andoffset eNodeB
for the
Reselection EUTRANINTRAFREQNC eNodeBId identifies a cell within an eNodeB
identity (represented
intra-frequency by
neighboring the
optimization ELL eNodeB. The 28-bit E-UTRAN
most
cell, significant
which isisused 20 inbits). The
cell
cell identity
global identity comprised
(CGI) of of an
the
HO & MOD evaluation for cell reselections.
cell identity
E-UTRAN (represented
cell ofis comprised by of
Reselection EUTRANINTRAFREQNC CellId A larger value thiseight bits) eNodeB
the
the least
E-UTRAN significant
cell in
identity and
optimization ELL parameter results a lower
and
the the eNodeB
PLMN ID. Foridentity.
details,The see
probability
Indicates
cell global theof cell
identity reselections.
individual
(CGI) of an
HO & MOD 3GPP TS 36.413.
If this parameter
offset
E-UTRAN for the is not set toof
cellintra-frequency
is comprised
Reselection EUTRANINTRAFREQNC CellQoffset eNodeB
dB0, it
neighboring is delivered
the E-UTRAN cellwhich cell, in SIB4.
identity For
is used
and
optimization ELL
details,
in see
evaluation 3GPP
for
the PLMN ID. For details, see TS 36.331.
handovers.It
HO & MOD If this parameter
affects
3GPP TSthe36.413. is setofto dB0,
probability
Reselection EUTRANINTRAFREQNC CellIndividualOffset it is not delivered
triggering in SIB4. In
intra-frequency eNodeB
optimization ELL this situation, UEs
measurement use A
reports. 0 larger
dB as
the offset
value of thisfor parameter
cell reselections.
HO & Indicates
For details,
indicates athe seelocal
higher 3GPPID ofTS the
probability.
MOD Indicates the hysteresis for
Reselection LocalCellId cell.
36.304.
For It uniquely
details, see handoveridentifies
3GPP TSa cell eNodeB
INTRAFREQHOGROUP intra-frequency
optimization within
36.331. a BS.
event A3.This parameter
HO & Indicates the
decreases ID of the
frequent event
MOD
Reselection IntraFreqHoGroupId parameterdue
triggering groupto related
radio to
signal eNodeB
INTRAFREQHOGROUP
optimization intra-frequency
fluctuations andhandover.
reduces the
probability of handover
HO & Indicates the offset
MOD decision errors and for event
ping-pong
Reselection IntraFreqHoA3Hyst A3.If eNodeB
INTRAFREQHOGROUP handovers. A larger value to
the parameter is set of a
optimization large value, an intra-frequency
this parameter results in a
handover
lower probability.is performedThe only
HO &
MOD when the signal quality of the
Reselection IntraFreqHoA3Offset hysteresis for event inter- eNodeB
INTRAFREQHOGROUP neighboring cell
frequency handover event A3 is significantly
optimization
better
is the samethan that as theof the
valueserving
of this
cell and
parameter. other For triggering
details, see
Feature CNOPERATORINDE Indicates
conditions the index of the
are met. For details,
DSP LICINFO 3GPP TSthat 36.331. eNodeB
optimization X operator
see 3GPP TSowns 36.331. the license.

08/24/2023 华为保密信息,未经授权禁止扩散 第178页，共633页

 686970386.xls 文档密级

Feature
DSP LICINFO FUNCTIONTYPE Indicates the function type. eNodeB
optimization

Indicates the local ID of the

Feature
DSP CELL LocalCellId cell. It uniquely identifies a cell eNodeB
optimization
within a BS.
Indicates the number of the
Feature
DSP BRDMFRINFO CN cabinet where the board is eNodeB
optimization
located.

Feature the subrack number of the

DSP BRDMFRINFO SRN eNodeB
optimization board.

Feature Indicates the slot number of

DSP BRDMFRINFO SN eNodeB
optimization the board.

Indicates the local ID

CqiAdjAlgoSwitch: of the
Indicates
Feature MOD
LocalCellId cell.switch
the It uniquely
usedidentifies
to controla cell eNodeB
optimization CELLALGOSWITCH
within a BS.
whether to allow the eNodeB
to adjust the UE-reported CQI
Feature MOD Indicates
based on whether
the initialtoblock
applyerror
CqiAdjAlgoSwitch MRC/IRC adaptation to the eNodeB
optimization CELLALGOSWITCH rate (IBLER).
PUCCH/PRACH in
DlVarIBLERtargetSwitch: a cell.
PucchIrcSwitch:
Indicates whetherIf to this option is
enable
Feature MOD selected, MRC/IRC
downlink target IBLER adaptation
IrcSwitch eNodeB
optimization CELLALGOSWITCH applies to the PUCCH. If this
adaptation.
option is deselected, MRC
applies tothe
Indicates thelocal
PUCCH. ID ofThethe
Power LBBPc does notidentifies
support a cell
MOD PDSCHCFG LocalCellId cell. It uniquely eNodeB
optimization PUCCH MRC or IRC.
within
Indicatesa BS.
the cell reference
signal power of each physical
Power antenna. However, the cell
MOD PDSCHCFG ReferenceSignalPwr eNodeB
optimization reference signal power
delivered in SIB2 is that of
each logical
Indicates theantenna.
number of the
Power
DSP TXBRANCH CN cabinet where the board is eNodeB
optimization
located.
Indicates the subrack number
Power of the RRU or RFU where the
DSP TXBRANCH SRN eNodeB
optimization TX channel of the RRU or RFU
is located.
Indicates the slot number of
Power the RRU or RFU where the TX
DSP TXBRANCH SN eNodeB
optimization channel of the RRU or RFU is
located.
Power Indicates the number of the TX
DSP TXBRANCH TXNO eNodeB
optimization channel of the RRU or RFU.

Indicates the local ID of the

Power MOD
LOCALCELLID cell. It uniquely identifies a cell eNodeB
optimization EUCELLSECTOREQM
within the eNodeB.
Indicates the ID of the sector
equipment that serves the cell.
Power MOD
SECTOREQMID It uniquely identifies a set of eNodeB
optimization EUCELLSECTOREQM
sector equipment within an
eNodeB.
Indicates the reference signal
Power MOD
ReferenceSignalPwr power of the sector equipment eNodeB
optimization EUCELLSECTOREQM
that serves the cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第179页，共633页

 686970386.xls 文档密级
Indicates the scaling factor
index of the Energy Per
Resource Element (EPRE) on
Power
MOD PDSCHCFG Pb the PDSCH. This scaling factor eNodeB
optimization Indicates the PA
is determined by to
thebe usedof
value
when PA adjustment
this parameter and the for
PDSCH
antenna power
port. control is
Power MOD
PaPcOff disabled, DL ICIC is disabled, eNodeB
optimization CELLDLPCPDSCHPA
and the even power
distribution is used for the
PDSCH.

08/24/2023 华为保密信息,未经授权禁止扩散 第180页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit

Use this command to modify the Value Range: 0 to 3600

eRAN7.0 and later parameters related to the timers Default Value: 20
of RRC connection control Unit: sRange:
Value
Use this command to modify the
settings of UE timers and MS100_T300,
GUI Value Range: 0 to
eRAN7.0 and later constants. MS200_T300,
255
MS300_T300,
Unit: None
Use this command to modify the Value Range:
MS400_T300,
settings of UE timers and MS100_T301,
MS600_T300,
eRAN7.0 and later constants. MS200_T301,
MS1000_T300,
MS300_T301,
MS1500_T300,
MS400_T301,
MS2000_T300
Use this command to modify the Value Range:
MS600_T301,
Default Value: FDD:
MS1000_T311,
eRAN7.0 and later settings of UE timers and MS1000_T301,
MS200_T300; TDD:
constants MS3000_T311,
MS1500_T301,
MS1000_T300
MS5000_T311,
MS2000_T301
Unit: ms
Use this command to modify the MS10000_T311,
Default Value:
eRAN7.0 and later settings of UE timers and MS15000_T311,
MS200_T301
constants MS20000_T311,
Unit: ms
MS30000_T311
Use this command to modify the Value
DefaultRange:
Value: 1 to 16
eRAN7.0 and later parameters related to the timers Default Value: 4
MS10000_T311
of RRC connection control Unit: s
Unit: ms
Use this command to modify the GUI Value Range: 0 to
eRAN7.0 and later configuration of the PDCCH 255
resource allocation algorithm Unit: None
Use this command to modify the Value Range: 1 to 4
eRAN7.0 and later configuration of the PDCCH Default Value: 1
resource allocation algorithm Unit: None
Value Range: OFF, ON,
Use this command to modify the ECFIADAPTIONON
eRAN7.0 and later configuration of the PDCCH Default Value:
resource allocation algorithm ECFIADAPTIONON
Unit: None
Value Range: 1 to 200
Use this command to modify the
eRAN7.0 and later Default Value: 20
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 3 to 15
Use this command to modify the
eRAN7.0 and later Default Value: 15
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eRAN7.0 and later Default Value: 20
eNodeB connection state timers
Unit: s
GUI Value Range: 0 to
Use this command to modify an
eRAN7.0 and later 39
RLC/PDCP parameter group
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第181页，共633页

 D_T1,
MAXRETX_THRESHOL
Value
D_T2, Range:
MAXRETX_THRESHOL
MAXRETX_THRESHOL
D_T1,
686970386.xls
D_T3, 文档密级
MAXRETX_THRESHOL
MAXRETX_THRESHOL
D_T2,
Value
D_T4, Range:
MAXRETX_THRESHOL
N3_PREMB_TRANS_M
MAXRETX_THRESHOL
Use this command to modify an AX,
D_T3,
eRAN7.0 and later D_T6,
RLC/PDCP parameter group MAXRETX_THRESHOL
N4_PREMB_TRANS_M
MAXRETX_THRESHOL
D_T4,
AX,
D_T8,
MAXRETX_THRESHOL
Use this command to modify an N5_PREMB_TRANS_M
MAXRETX_THRESHOL
eRAN7.0 and later D_T6,
AX,
D_T16,
RLC/PDCP parameter group
MAXRETX_THRESHOL
N6_PREMB_TRANS_M
MAXRETX_THRESHOL
D_T8,
AX,
D_T32
GUI Value Range: 0 to
Use this command to modify the MAXRETX_THRESHOL
N7_PREMB_TRANS_M
Default Value:
eRAN7.0 and later 255
D_T16,
RACH configuration. AX,
MAXRETX_THRESHOL
Unit:
Value None
Range:
MAXRETX_THRESHOL
N8_PREMB_TRANS_M
D_T32
DB0_PWR_RAMPING_S
D_T32
AX, None
Use this command to modify the Unit:
TEP,
Default Value:
eRAN7.0 and later N10_PREMB_TRANS_M
RACH configuration. DB2_PWR_RAMPING_S
MAXRETX_THRESHOL
AX,
TEP,
D_T32
N20_PREMB_TRANS_M
DB4_PWR_RAMPING_S
Unit: None
Use this command to modify the AX,
eRAN7.0 and later TEP,
N50_PREMB_TRANS_M
RACH configuration.
DB6_PWR_RAMPING_S
AX,
TEP
N100_PREMB_TRANS_
Use this command to modify the GUI Value Range: 0 to
Default
eRAN7.0 and later neighbor relationship with an MAX, Value:
255
DB2_PWR_RAMPING_S
intra-frequency E-UTRAN cell. N200_PREMB_TRANS_
Unit:
TEP None
MAX
Unit:
Use this command to modify the GUI dBValue:
Value
Default Range: 000 to
eRAN7.0 and later neighbor relationship with an 999
N10_PREMB_TRANS_M
intra-frequency E-UTRAN cell. Unit:
AX None
Use this command to modify the Unit: None Range: 00 to
GUI Value
eRAN7.0 and later neighbor relationship with an 99, 000 to 999
intra-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUI Value Range: 0 to
eRAN7.0 and later neighbor relationship with an 1048575
intra-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUIValueValue Range:
Range: 0 todB-
dB-24,
eRAN7.0 and later neighbor relationship with an 255dB-20, dB-18, dB-16,
22,
intra-frequency E-UTRAN cell. dB-14,
Unit: None
dB-12, dB-10, dB-
8, dB-6, dB-5, dB-4, dB-
Use this command to modify the Value Range: dB-24, dB-
3, dB-2, dB-1, dB0, dB1,
eRAN7.0 and later neighbor relationship with an 22,
dB2,dB-20, dB-18,
dB3, dB4, dB-16,
dB5,
intra-frequency E-UTRAN cell. dB-14, dB-12, dB-10, dB-
Use this command to modify the dB6, dB8, dB10, dB12,
8, dB-6,
dB14, dB-5,dB18,
dB16, dB-4,dB20,
dB-
neighbor relationship with an
3, dB-2, dB-1, dB0, dB1,
eRAN7.0 and later intra-frequency E-UTRAN cell. dB22, dB24
dB2, dB3, dB4, dB5,
Unit: dB
dB6, dB8, dB10, dB12,
Use this command to modify a GUI dB14, dB16,
Value dB18,0dB20,
Range: to
dB22, dB24
eRAN7.0 and later parameter group related to intra- 255
frequency handover dB
Unit: None
Use this command to modify a
GUI Value Range: 0 to 9
eRAN7.0 and later parameter group related to intra-
Unit: None
frequency handover
Use this command to modify a
Default Value: 5
eRAN7.0 and later parameter group related to intra-
Unit: 0.5dB
frequency handover
Use this command to modify a
Default Value: {-8; 8}
eRAN7.0 and later parameter group related to intra-
unit: 0.5dB
frequency handover
GUI Value Range: 0 to 5,
Use this command to query the
eRAN7.0 and later 65535
license sale information
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第182页，共633页

 686970386.xls 文档密级

GUI Value Range:

Use this command to query the
eRAN7.0 and later eNodeB
license sale information
Unit: None
Use this command to query the GUI Value Range: 0 to
Use this command
manufacturing to list the
information about
eRAN7.0 and later 255
dynamic information
a board. Only one boardabout a cell
can be Unit: None
queried at a time. Because
Use
therethis command
is only to query the
one backplane inGUI Value Range: 0 to
eRAN7.0 and later manufacturing information
the BBU subrack, the about
62
a board. Only one
manufacturing board can
information be
about
Unit: None
queried at
the subrack a time. Because
can be to obtained by
Use this command query the GUI Value Range: 0 to 1,
there
the is only
query onemanufacturing
of the backplane in
manufacturing information 4 to 5, 7 to 8, 11 to 12,
about
eRAN7.0 and later the BBU subrack,
information about the
the
a board. Only one board can 14 to 15, 40 to 254
be
manufacturing
backplane. information about
queried at a time. Because Unit: None
the subrack can be obtained by
there is only
the query onemanufacturing
of the backplane in GUI Value Range: 0 to 8,
eRAN7.0 and later the BBU subrack,
information about the the 16, 18 to 19, 255
manufacturing information For
Unit:FDD
about None
backplane. Default Value:
the subrack can be obtained by
Use this command
the query to modify the
of the manufacturing GUI Value Range: 0 to
DlVarIBLERtargetSwitch-
eRAN7.0 and later settings
information about thealgorithm
of cell-level 255
1, CqiAdjAlgoSwitch-1,
switches
backplane. Unit: None
AdaptiveStepVarySwitch-
1
Use this command to modify the
Unit: None
eRAN7.0 and later settings of cell-level algorithm
For TDD
switches.
Default Value:
Default Value:
Use this command to modify the CqiAdjAlgoSwitch-1,
IrcSwitch=PucchIrcSwitc
StepVarySwitch-1,
eRAN7.0 and later settings of cell-level algorithm
h-1
AdaptiveStepVarySwitch-
switches.
Unit:
1 None
GUI Value Range: 0 to
Use this command to modify the Unit: None
eRAN7.0 and later 255
PDSCH configuration.
Unit: None
Use this command to query the Value Range: -600 to
Use this command
dynamic attributes ofto the
modify
TX the 500
eRAN7.0 and later
PDSCH
channel configuration.
of the RRU or RFU. Unit: 0.1 dBm
The dynamic attributes include
Use this command
information such as the to query the GUI Value Range: 0 to
eRAN7.0 and later dynamic
hardwareattributes
maximumofoutput
the TX 62
channel
power and of the RRU oroutput
maximum RFU. Unit: None
The
power dynamic attributes
of command
the TX Channel,include
Use this
information such as to query
the of TXthe GUI Value Range: 4 to 5,
maximum
dynamic output
attributes power
ofoutput
the TX
eRAN7.0 and later hardware
unit, maximum
frequency band,orand 60 to 254
channel
power andof the RRU
maximum RFU.
output Unit: None
bandwidth.
The dynamic attributes include
power
Use of command
this the TX Channel,
to query the
information
maximum such as
output the of TX
power
dynamic attributes ofoutput
the TX GUI Value Range: 0 to 8
eRAN7.0 and later hardware maximum
unit, frequency band,orand
channel of the RRU RFU. Unit: None
power and maximum output
bandwidth.
The dynamic attributes
power of the TX Channel, include
information
maximum output such as the of TX
power GUI Value Range: 0 to 8
eRAN7.0 and later hardware
unit, frequency band,output
maximum and Unit: None
power and maximum output
bandwidth.
power of the TX Channel,
maximum output power of TX GUI Value Range: 0 to
Use this command to modify
eRAN7.0 or later unit, frequency band, and 255
cell-level algorithm switches.
bandwidth. Unit: None
GUI Value Range: 0 to
Use this command to modify
eRAN7.1 or later 65535
cell-level algorithm switches.
Unit: None
GUI Value Range: –600
Use this command to modify
eRAN7.2 or later to 500, 32767
cell-level algorithm switches.
Unit: 0.1 dBm

08/24/2023 华为保密信息,未经授权禁止扩散 第183页，共633页

 686970386.xls 文档密级

GUI
GUI Value
Use this command to modify the Value Range：
Range: 0 to 3
eRAN7.0 and later DB_6_P_A(-6 dB),
PDSCH configuration. Unit: None
DB_4DOT77_P_A(-4.77
dB), DB_3_P_A(-3 dB),
Use this command to modify the
DB_1DOT77_P_A(-1.77
eRAN7.0 and later PA parameters related to power
dB), DB0_P_A(0 dB),
control for the PDSCH.
DB1_P_A(1 dB),
DB2_P_A(2 dB),
DB3_P_A(3 dB)
Unit：dB

08/24/2023 华为保密信息,未经授权禁止扩散 第184页，共633页

 686970386.xls 文档密级

Parameter
Fixed-value Valueinclude
parameters: Type the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第185页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client
algorithm requirements. and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client
algorithm requirements. and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which
on the MAE client or on NEs.the MAE
calculates optimization values
according to algorithm requirements
Identity-related
and the value range parameters:
of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
Fixed-value
the fixed valuesparameters:
of these includes
parameters the
parameters for which the MAE
based on the objects that are filtered provides
built-in
accordingdefault values that
to algorithm cannot be
requirements.
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and tothealgorithm requirements.
MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第186页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
Fixed-value parameters:
the fixed values of these includes
parameters the
parameters for which the MAE
based on the objects that are filtered provides
built-in
accordingdefault values that
to algorithm cannot be
requirements.
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and to thealgorithm
MOC primaryrequirements.
key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related
and the value range parameters:
of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第187页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
by users. The MAE delivers the fixed
values of these parameters based on
the objects that are filtered according to
algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第188页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

MOD Indicates the device number of

– DEVICENO eNodeB
RETSUBUNIT the RET.

MOD Indicates the number of the RET

– SUBUNITNO eNodeB
RETSUBUNIT subunit, which starts from 1.
Indicates the antenna tilt of the
MOD RET subunit. If this parameter is
– TILT eNodeB
RETSUBUNIT set to 32767, it is invalid and the
actual tilt is
Indicates thenot changed.
device number of
the VRET antenna where the
MOD
– DEVICENO VRET subunit is contained. The eNodeB
VRETSUBUNIT
device number of the VRET
antenna must be unique
Indicates the number of the
MOD
– SUBUNITNO VRET subunit, which starts from eNodeB
VRETSUBUNIT
1

MOD Indicates the uplink downtilt of

– ULTILT eNodeB
VRETSUBUNIT the VRET subunit.

MOD Indicates the downlink downtilt of

– DLTILT eNodeB
VRETSUBUNIT the VRET subunit.

MOD
Index type of the BTS. BYID:
– BTSRETSUBUNI IDTYPE eNodeB
query by BTS index.
T
MOD
Index of the BTS, uniquely
– BTSRETSUBUNI BTSID eNodeB
identifying a BTS in a BSC.
T
MOD
– BTSRETSUBUNI DEVICENO Number of the RET antenna. eNodeB
T
MOD
Number of the RET antenna
– BTSRETSUBUNI SUBUNITNO eNodeB
subunit.
T
MOD
Antenna tilt angle configured for
– BTSRETSUBUNI TILT eNodeB
the RET subunits.
T

DSP Indicates the device number of

– DEVICENO eNodeB
RETSUBUNIT the RET.

DSP Indicates the number of the RET

– SUBUNITNO eNodeB
RETSUBUNIT subunit, which starts from 1.

DSP
Indicates the device number of
– RETDEVICEDAT DEVICENO eNodeB
the RET.
A
DSP
Indicates the number of the RET
– RETDEVICEDAT SUBUNITNO eNodeB
subunit, which starts from 1.
A

08/24/2023 华为保密信息,未经授权禁止扩散 第189页，共633页

 686970386.xls 文档密级

Indicates the number of the

– DSP AARU CN cabinet where the AARU is eNodeB
located.
Indicates the number of the
– DSP AARU SRN subrack where the AARU is eNodeB
located.

Indicates the slot number of the

– DSP AARU SN eNodeB
AARU.
Indicates the device number of
the VRET antenna where the
– DSP VRETSUBUNDEVICENO VRET subunit is contained. The eNodeB
device number of the VRET
antenna must be unique.
Indicates the number of the
– DSP VRETSUBUNSUBUNITNO VRET subunit, which starts from eNodeB
1.

Index type. BYNAME: query by

– DSP BTSRETSUBIDTYPE eNodeB
name; BYID: query by index.

Index of the BTS, uniquely

– DSP BTSRETSUBBTSID eNodeB
identifying a BTS in a BSC.

– DSP BTSRETSUBDEVICENO Number of the RET antenna. eNodeB

Number of the RET antenna

– DSP BTSRETSUBSUBUNITNO eNodeB
subunit.

Index type. BYNAME: query by

DSP BTSRETDEVIDTYPE eNodeB
name; BYID: query by index.

Index of the BTS, uniquely

– DSP BTSRETDEVBTSID eNodeB
identifying a BTS in a BSC.

– DSP BTSRETDEVDEVICENO Number of the RET antenna. eNodeB

Number of the RET antenna

– DSP BTSRETDEVSUBUNITNO eNodeB
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第190页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit

Use this command to modify a GUI Value Range: 0 to

eRAN7.0 and later remote electrical tilting (RET) 125
subunit. Unit: None
Use this command to modify a
GUI Value Range: 1 to 8
eRAN7.0 and later remote electrical tilting (RET)
Unit: None
subunit.
Use this command to modify a
Value Range: -100 to 300
eRAN7.0 and later remote electrical tilting (RET)
Unit: 0.1 degree
subunit.
Use this command to modify a GUI Value Range:
eRAN7.0 and later remote electrical tilting (RET) 60~254
subunit. Unit: None
Use this command to modify a
GUI Value Range: 1~8
eRAN7.0 and later remote electrical tilting (RET)
Unit: None
subunit.
Use this command to modify a GUI Value Range: -
eRAN7.0 and later remote electrical tilting (RET) 150~150
subunit. Unit: 0.1degree
Use this command to modify a GUI Value Range: -
eRAN7.0 and later remote electrical tilting (RET) 150~150
subunit. Unit: 0.1degree
Use this command to modify a Default Value: BYID(By
eRAN7.0 and later remote electrical tilting (RET) Index)
subunit. Unit: None
Use this command to modify a GUI Value Range:
eRAN7.0 and later remote electrical tilting (RET) 0~7999
subunit. Unit: None
Use this command to modify a
GUI Value Range: 0~35
eRAN7.0 and later remote electrical tilting (RET)
Unit: None
subunit.
Use this command to modify a
GUI Value Range: 1~8
eRAN7.0 and later remote electrical tilting (RET)
Unit: None
subunit.
Use this command to modify a GUI Value Range: -
eRAN7.0 and later remote electrical tilting (RET) 100~300
subunit. Unit: None
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第191页，共633页

 686970386.xls 文档密级

Use this command to query a

eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.
Use this command to query a
eRAN7.0 and later remote electrical tilting (RET) –
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第192页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as
CellId, IDTYPE, MCC, and the
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE does
include parameters
not optimize suchofas
the values these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign
Range-value
key parameters. parameters:
The MAE does
include
not optimize the values for
the parameters of these
which the MAE calculates
parameters.
optimization values according to
Identity-related parameters:
algorithm requirements and the
include
value range of eachsuch
parameters as
parameter
CellId, IDTYPE, MCC,
on the MAE client or on NEs.and the
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE does
include parameters
not optimize suchofas
the values these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign
Range-value
key parameters. parameters:
The MAE does
include
not optimize the values for
the parameters of these
which the MAE calculates
parameters.
optimization values according to
Range-value parameters:
algorithm requirements and the
include the parameters
value range of each parameterfor
which
on the the
Fixed-value
MAE MAE calculates
parameters:
client or on NEs.
optimization
includes the values according
parameters for to
algorithm
which the requirements
MAE providesand the
built-in
value range
default valuesof that
eachcannot
parameter
be
on the MAE
modified client or
by users. TheonMAE
NEs.
delivers the fixed values
Identity-related parameters: of
these parameters
include parametersbasedsuch on
as the
objectsIDTYPE,
CellId, that are filtered
MCC, and the
according
MOC primaryto algorithm
key and foreign
Identity-related
parameters.parameters:
requirements.
key The MAE does
include parameters
not optimize suchofas
the values these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE does
include parameters
not optimize suchofas
the values these
CellId, IDTYPE,
parameters. MCC, and the
MOC primary key and foreign
Range-value
key parameters. parameters:
The MAE does
include the parameters
not optimize the values for
of these
which the MAE calculates
parameters.
optimization values according to
algorithm requirements and the
value range of each parameter
on the MAE client or on NEs.
–

08/24/2023 华为保密信息,未经授权禁止扩散 第193页，共633页

 686970386.xls 文档密级

08/24/2023 华为保密信息,未经授权禁止扩散 第194页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description
Indicates the local
Parameter ID of the cell. It
MOD CELLSEL LocalCellId eNodeB
check uniquely identifies a
Indicates
cell withinthe a BS.
minimum required
Parameter RX level for
Indicates thethe cell
MOD CELLSEL QRxLevMin eNodeB
check to becomerequired
minimum
proportion a
of
candidate
RX signal
resources reserved for
quality cell for
selection.
the cell
for non-GBR to become a
Parameter
MOD CELLSEL QQualMin candidateAfor cell
services. eNodeB
check
selection, which
proportion of
corresponds
Indicates
resources is to
the localthe
MOD IE
Parameter ID q-QualMin
of the cell. in
reserved It
CELLDLSCHALG LocalCellId SIB1 eNodeB
check uniquely
periodically identifies
to a
O
cell within
prevent a BS.
non-GBR
MOD services from failing
Parameter
CELLDLSCHALG NonGbrResourceRatio to be allocated eNodeB
check
O resources. During
Indicates
the periods thewhen timer
MOD for the eNodeB to
Parameter WaitRrcConnSetupCm resources are
ENODEBCONNST wait for an
reserved, resources RRC eNodeB
check pTimer
ATETIMER Connection
Indicates
are scheduled theSetup timer
Complete.
governing
preferentially for the
MOD
Parameter S1MessageWaitingTim period
non-GBR theservices.
eNodeB
ENODEBCONNST Indicates the eNodeB
check er will
If wait
this for
parameter a timer is
ATETIMER governing the
response
set to 0, message
resources
period
fromnot the the eNodeB
MME.
MOD
Parameter UuMessageWaitingTim are
waits forreserved
Indicates atheresponse
timer for
ENODEBCONNST non-GBR services. eNodeB
check er message
governing the from a UE
ATETIMER
when the
period theUE local is
MOD running non-QCI1
eNodeB waits for a
Parameter X2MessageWaitingTim services.
ENODEBCONNST response message eNodeB
check er
ATETIMER from the peer
Indicates
eNodeB when the timer the
MOD for the eNodeB
UE is running non- to
Parameter
ENODEBCONNST SecCmpWaitingTimer wait
QCI1 for a Security
services. eNodeB
check Indicates the timer
ATETIMER Mode Complete
for the
message. eNodeB to
MOD wait for an
Parameter UpUeCapInfoWaitingTi Indicates the
ENODEBCONNST unprotected UE eNodeB
check mer eNodeB-specific
ATETIMER Capability
maximum
Informationnumber
MOD Indicates
of RLC ARQ
message. the ID of
Parameter
RLCPDCPPARAG RlcPdcpParaGroupId Indicates
the RLC/PDCP
retransmissions, the UE- eNodeB
check specific
Indicates maximum
the length
ROUP parameter
namely the group.
number
of the UE
maximum numberof RLC
inactivity
MOD ARQ
Parameter ENodeBMaxRetxThres timer.
of AM IfPDU the eNodeB
RLCPDCPPARAG retransmissions,
detects that a UE eNodeB
check hold retransmissions.
ROUP namely
has the
neither
Indicates the received
lengthof
When the number
maximum
nor
of sent
timer T302.
retransmissions number
data for a
MOD
Parameter of AM
duration
T302 PDU exceeding
specifies the of
RLCPDCPPARAG UeMaxRetxThreshold reaches the value eNodeB
check retransmissions.
the
this value
time during
parameter,of which
this a
ROUP
When
parameter,
UE
RRCwhose the number
connection the re-
RRC of
MOD retransmissions
eNodeB
connection
establishment isreleases
request
Parameter reaches
RRCCONNSTATE UeinactiveTimer the
is RRCthe
rejected
initiated. value
connection
has to of eNodeB
check this parameter,
TIMER for the
wait UE. Ifthe
before this UE
RRC
parameterconnection
can initiate isa set to re-
MOD establishment
0, the UE inactivityis
Parameter request again.
RRCCONNSTATE T302 initiated.
timer is notisused. If eNodeB
check This timer started
TIMER this parameter
when the UE is
modified,an
receives the
modified
RRCConnectionRejvalue
applies
ect messageonly toand UEs
that access
stopped when thethe
08/24/2023 华为保密信息,未经授权禁止扩散 network
UE enters later.
the 第195页，共633页
RRC_CONNECTED
mode or performs
cell reselection.
 Indicates the timer
value of Timer 300.
For details, see
Indicates
3GPP TS the timer
36.331.
686970386.xls
value of Timer 310. 文档密级
For
Thisdetails,
timer issee started
3GPP
Indicates
when TS the
the 36.331.
UE local
sends
Parameter MOD ID of the cell. It
RRCConnectionReq
LocalCellId This eNodeB
check UETIMERCONST uest.timeridentifies
uniquely is starteda
when the UE
cell within sends
a BS.
an RRC Connection
Before the timer
Parameter MOD Reestablishment
Indicates
T300 expires, itthe is length eNodeB
check UETIMERCONST Request
of message.
stopped if theFor
timer 311. UE
details,
receivessee
Indicates the3GPP
timer
Parameter MOD The
TS timer
36.331.
RRCConnectionSet
value of Timeris stopped
301.
T301 if, before eNodeB
check UETIMERCONST up or
For details,expires,
it see
the
This
3GPP UEtimerreceives
RRCConnectionRej
TS an
is started
36.331.
RRC
when
ect. Connection
the UE starts
Parameter MOD Reestablishment
the RRC connection or
T310 eNodeB
check UETIMERCONST RRC
After theConnection
reestablishment timer
Reestablishment
procedure.
expires, the UE
Reject
enters the message.
Parameter MOD also
T311 The timer
RRC_IDLE isstate.
stopped eNodeB
check UETIMERCONST Indicates
stopped the
if, beforeifthe thetimer
maximum
selected
expires, the cellnumber
UE
of successive
becomes
selects anan E- "out
Parameter MOD
N310 of sync" or
unsuitable
UTRAN indications
cell.
inter-For eNodeB
check UETIMERCONST Indicates the
received
the definition
RAT cell to from ofL1.
camp a
maximum
For details, number
see
suitable
on.
of successivecell, see "in
Parameter MOD 3GPP
3GPP TS
TS 36.331.
36.331.
N311 sync" indications eNodeB
check UETIMERCONST After the timer
received from L1.
After
expires, thethe
For details,
Indicates timer UE
theseelocal
MOD expires,
Parameter ID of the cell.UE
enters
3GPP TSthe
the 36.331.
It
CELLPDCCHALG LocalCellId enters theidentifies
RRC_IDLE state. a eNodeB
check uniquely
O RRC_IDLE
cell withinthe
Indicates a state.
BS.
MOD Indicates
number ofthe switch
OFDM
Parameter used to enable
CELLPDCCHALG InitPdcchSymNum symbols initiallyor eNodeB
check disable dynamic
O occupied by the
adjustment
PDCCH. on the
number of
MOD orthogonal
Parameter
CELLPDCCHALG PdcchSymNumSwitch frequency division eNodeB
check
O multiplexing
(OFDM) symbols
occupied
Indicates the by thelocal
offset
HO & MOD Indicates
physical
ID of
for the the cell. cell
the
downlink
intra- It
Reselection EUTRANINTRAFR LocalCellId individual
control offset fora
channel eNodeB
uniquely
frequency identifies
optimization EQNCELL the
cell intra-frequency
(PDCCH).
within a BS.
neighboring cell,
HO & MOD neighboring
which is usedcell, in
Reselection EUTRANINTRAFR CellQoffset which
evaluation is used for in
cell eNodeB
optimization EQNCELL evaluation
reselections. forA
handovers.
larger valueItofaffects this
HO & MOD the probability
parameter of in
results
Reselection EUTRANINTRAFR CellIndividualOffset triggering intra-
a lower probability eNodeB
optimization EQNCELL frequency
of cell reselections.
measurement
Indicates the local
Power reports.
ID of theAcell.
Indicates larger
the It
cell
MOD PDSCHCFG LocalCellId value of this eNodeB
optimization uniquely
reference signal a
identifies
parameter
cell
power withinof eachaindicates
BS.
a higher antenna.
physical probability.
Power For details,the see
MOD PDSCHCFG ReferenceSignalPwr However, cell eNodeB
optimization 3GPP TS 36.331.
reference signal
Indicates
power delivered the local in
MOD ID
SIB2 is that ofIteach
of the cell.
Power
EUCELLSECTOR LOCALCELLID uniquely identifies a
logical antenna. eNodeB
optimization
EQM cell within the
eNodeB.

08/24/2023 华为保密信息,未经授权禁止扩散 第196页，共633页

 686970386.xls 文档密级
Indicates the ID of
the sector
equipment that
MOD
Power serves the cell. It
EUCELLSECTOR SECTOREQMID eNodeB
optimization uniquely identifies a
EQM
set of sector
Indicates the
MOD equipmentsignal
reference within an
Power eNodeB.
EUCELLSECTOR ReferenceSignalPwr power of the sector eNodeB
optimization
EQM equipment that
serves the cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第197页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit

Use this command to modify GUI Value Range: 0 to

eRAN7.0 and later the parameters about cell 255
selection. Unit: None
Use this command to modify Value Range: -70 to -22
eRAN7.0 and later the parameters about cell Default Value: -64
selection. Unit: 2dBm
Use this command to modify Value Range: -34 to 3
eRAN7.0 and later the parameters about cell Default Value: -18
selection. Unit: dB
Use this command to modify GUI Value Range: 0 to
eRAN7.0 and later the configuration of the cell DL 255
scheduling algorithm. Unit: None
Use this command to modify Value Range: 0 to 50
eRAN7.0 and later the configuration of the cell DL Default Value: 0
scheduling algorithm. Unit: %
Use this command to modify Value Range: 3 to 15
eRAN7.0 and later the eNodeB connection state Default Value: 15
timers. Unit: s
Use this command to modify Value Range: 1 to 200
eRAN7.0 and later the eNodeB connection state Default Value: 20
timers. Unit: s
Use this command to modify Value Range: 1 to 200
eRAN7.0 and later the eNodeB connection state Default Value: 35
timers. Unit: s
Use this command to modify Value Range: 1 to 200
eRAN7.0 and later the eNodeB connection state Default Value: 20
timers. Unit: s
Use this command to modify Value Range: 1 to 200
eRAN7.0 and later the eNodeB connection state Default Value: 35
timers. Value
Unit: sRange:
MAXRETX_THRESHOL
Use this command to modify Value
D_T1, Range: 1 to 200
eRAN7.0 and later the eNodeB connection state Default Value: 35
MAXRETX_THRESHOL
timers. Value
Unit: sRange:
D_T2,
Use this command to modify MAXRETX_THRESHOL
MAXRETX_THRESHOL
an RLC/PDCP parameter D_T1,
Value Range: 0 to 39
D_T3,
eRAN7.0 and later MAXRETX_THRESHOL
group. Unit: None
MAXRETX_THRESHOL
D_T2,
D_T4,
Use this command to modify MAXRETX_THRESHOL
MAXRETX_THRESHOL
an RLC/PDCP parameter D_T3,
eRAN7.0 and later D_T6,
group. MAXRETX_THRESHOL
MAXRETX_THRESHOL
D_T4,
D_T8,
Use this command to modify
MAXRETX_THRESHOL
MAXRETX_THRESHOL
an RLC/PDCP parameter
eRAN7.0 and later D_T6,
D_T16,
group.
MAXRETX_THRESHOL
MAXRETX_THRESHOL
Use this command to modify D_T8,
D_T32Range: 0 to 3600
Value
MAXRETX_THRESHOL
the parameters related to the Default Value: 20
eRAN7.0 and later D_T16,
timers of RRC connection MAXRETX_THRESHOL
Use this command to modify Unit: s
MAXRETX_THRESHOL
control. D_T32
the parameters related to the D_T32
Value Range: 1 to 16
Unit: None
timers of RRC connection Default Value: 4
eRAN7.0 and later
control. MAXRETX_THRESHOL
Unit: s
D_T32
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第198页，共633页

 686970386.xls 文档密级

Use this command to modify Value Range:

the settings of UE timers and MS100_T300,
GUI Value Range: 0 to
eRAN7.0 and later constants. MS200_T300,
255
MS300_T300,
Unit: None
Use this command to modify MS400_T300,
Value Range:
the settings of UE timers and MS600_T300,
MS100_T301,
eRAN7.0 and later constants. MS1000_T300,
MS200_T301,
MS1500_T300,
MS300_T301,
MS2000_T300
MS400_T301,
Use this command to modify Value
DefaultRange:
Value: FDD:
MS600_T301,
eRAN7.0 and later the settings of UE timers and MS0_T310,
MS200_T300; MS50_T310,
TDD:
MS1000_T301,
constants. MS100_T310,
MS1000_T300
MS1500_T301,
MS200_T310,
Value Range:
Unit: ms
MS2000_T301
Use this command to modify
MS500_T310,
MS1000_T311,
Default Value:
eRAN7.0 and later the settings of UE timers and
MS1000_T310,
MS3000_T311,
MS200_T301
constants.
MS2000_T310
MS5000_T311,
Unit: ms
Use this command to modify Default Value:
MS10000_T311,
eRAN7.0 and later the settings of UE timers and MS1000_T310
MS15000_T311,
constants. Unit: ms
MS20000_T311,
MS30000_T311
Value Range: n1, n2, n3,
Use this command to modify Default Value:
n4, n6, n8, n10, n20
eRAN7.0 and later the settings of UE timers and MS10000_T311
Default Value: n10
constants. ms
Unit: None
Value Range: n1, n2, n3,
Use this command to modify
n4, n6, n8, n10
eRAN7.0 and later the settings of UE timers and
Default Value: n1
constants.
Unit: ms
Use this command to modify
GUI Value Range: 0 to
the configuration of the
eRAN7.0 and later 255
PDCCH resource allocation
Unit: None
algorithm.
Use this command to modify
Value Range: 1 to 4
the configuration of the
eRAN7.0 and later Default Value: 1
PDCCH resource allocation
Unit: None
algorithm.
Value Range: OFF, ON,
Use this command to modify
ECFIADAPTIONON
the configuration of the
eRAN7.0 and later Default Value:
PDCCH resource allocation
ECFIADAPTIONON
algorithm.
Unit: None
Use this command to modify
GUI Value
Value Range:
Range: 0 todB-
dB-24,
the neighbor relationship with
eRAN7.0 and later 255dB-20, dB-18, dB-16,
22,
an intra-frequency E-UTRAN
Unit: None
dB-14, dB-12, dB-10, dB-
cell.
Use this command to modify 8, dB-6, dB-5, dB-4, dB-
the neighbor relationship with Value Range:
3, dB-2, dB-1, dB-24, dB-
dB0, dB1,
eRAN7.0 and later 22, dB-20, dB-18, dB-16,
an intra-frequency E-UTRAN dB2, dB3, dB4, dB5,
cell. dB-14, dB-12,
dB6, dB8, dB-10,
dB10, dB12, dB-
Use this command to modify 8, dB-6, dB-5, dB-4, dB-
dB14, dB16, dB18, dB20,
the neighbor relationship with 3, dB-2,
dB22, dB-1, dB0, dB1,
dB24
eRAN7.0 and later
an intra-frequency E-UTRAN dB2,
Unit: dB dB4, dB5,
dB3,
cell. dB6, dB8, dB10, dB12,
dB14,
GUI dB16,
Value dB18,0dB20,
Range: to
Use this command to modify dB22, dB24
eRAN7.0 and later 255
the PDSCH configuration. dB
Unit: None
Value Range: -600 to
Use this command to modify
eRAN7.0 and later 500
the PDSCH configuration.
Unit: 0.1dBm
GUI Value Range: 0 to
Use this command to modify
eRAN7.0 or later 255
cell-level algorithm switches.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第199页，共633页

 686970386.xls 文档密级

GUI Value Range: 0 to

Use this command to modify
eRAN7.1 or later 65535
cell-level algorithm switches.
Unit: None
GUI Value Range: –600
Use this command to modify
eRAN7.2 or later to 500, 32767
cell-level algorithm switches.
Unit: 0.1 dBm

08/24/2023 华为保密信息,未经授权禁止扩散 第200页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
Fixed-value parameters:
primary key and include
foreign key
the parameters for
parameters. The MAE does which thenot
MAE
provides
optimize the values of these that
built-in default values
are displayed on the MAE client
parameters.
Fixed-value parameters:
and can be modified include
by users. The
the parameters for which
MAE delivers the fixed values the MAE
of
provides built-in default
these parameters basedvalues
on thethat
are displayed on the MAE client
objects that are filtered according
and
to can be modified
algorithm requirements. by users. The
Identity-related
MAE delivers the parameters:
fixed values of
include parametersbased
these parameters such on
as the
CellId,
IDTYPE,
objects MCC,
that are and the MOC
filtered according
Fixed-value
primary parameters:
key and include
foreign key
to
thealgorithm
parametersrequirements.
for which thenot
MAE
parameters. The MAE does
provides
optimize the values of these that
built-in default values
are displayed on the MAE client
parameters.
Fixed-value parameters:
and can be modified include
by users. The
the parameters for which
MAE delivers the fixed values the MAE
of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed on the MAE client
objects that are filtered according
and
to can be modified
algorithm requirements. by users. The
Identity-related
MAE delivers the parameters:
fixed values of
include parametersbased
these parameters such on
as the
CellId,
IDTYPE,
objects MCC,
that are and the MOC
filtered according
Fixed-value
primary parameters:
key and include
foreign key
to algorithm
the parametersrequirements.
for which thenot
MAE
parameters. The MAE does
provides
optimize the values of these that
built-in default values
are displayed on the MAE client
parameters.
Fixed-value parameters:
and can be modified include
by users. The
the parameters for which
MAE delivers the fixed values the MAE
of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to algorithm
the requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to algorithm
the requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed on the MAE client
objects that are filtered according
and can be modified
to algorithm requirements. by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第201页，共633页

 686970386.xls 文档密级
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
Fixed-value parameters:
primary key and foreign keyinclude
the parameters for
parameters. The MAE does which thenot
MAE
provides
optimize the values of these that
built-in default values
are displayed on the MAE client
parameters.
Fixed-value parameters:
and can be modified include
by users. The
the parameters for which
MAE delivers the fixed values the MAE
of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed
objects that areon the MAE client
filtered according
Fixed-value
and can be parameters:
modified by include
users. The
to
thealgorithm requirements.
MAEparameters
delivers the forfixed
which the MAE
values of
provides built-in default
these parameters basedvalues
on thethat
are displayed on the MAE
objects that are filtered accordingclient
and
to can be modified
algorithm requirements. by users. The
Identity-related
MAE delivers the parameters:
fixed values of
include parametersbased
these parameters such onas the
CellId,
IDTYPE,
objects MCC,
that are and the MOC
filtered according
Fixed-value
primary parameters:
key and foreign keyinclude
to
thealgorithm
parametersrequirements.
for which thenot
MAE
parameters. The MAE does
provides
optimize the values of these that
built-in default values
are displayed on the MAE client
parameters.
and can be modified by users. The
Fixed-value
MAE deliversparameters: include
the fixed values of
the parameters for
these parameters based onwhich thethe
MAE
provides built-in
objects that default according
are filtered values that
are displayedrequirements.
to algorithm on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
Identity-related
these parameters parameters:
based on the
include parameters
objects that are filteredsuchaccording
as CellId,
IDTYPE, MCC, and
to algorithm requirements.the MOC
primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas MAECellId,
IDTYPE, MCC,
client or on NEs. and the MOC
primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas MAECellId,
IDTYPE, MCC,
client or on NEs. and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第202页，共633页

 686970386.xls 文档密级
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第203页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

MOD Indicates the device number of

– DEVICENO eNodeB
RETSUBUNIT the RET.

Indicates the number of the

MOD
– SUBUNITNO RET subunit, which starts from eNodeB
RETSUBUNIT
1.
Indicates the antenna tilt of the
MOD RET subunit. If this parameter
– TILT eNodeB
RETSUBUNIT is set to 32767, it is invalid and
the actualthe
Indicates tilt is not changed.
device number of
the VRET antenna where the
MOD
– DEVICENO VRET subunit is contained. eNodeB
VRETSUBUNIT
The device number of the
VRET antenna must be unique
Indicates the number of the
MOD
– SUBUNITNO VRET subunit, which starts eNodeB
VRETSUBUNIT
from 1

MOD Indicates the uplink downtilt of

– ULTILT eNodeB
VRETSUBUNIT the VRET subunit.

MOD Indicates the downlink downtilt

– DLTILT eNodeB
VRETSUBUNIT of the VRET subunit.

MOD
Index type of the BTS. BYID:
– BTSRETSUBUNI IDTYPE eNodeB
query by BTS index.
T
MOD
Index of the BTS, uniquely
– BTSRETSUBUNI BTSID eNodeB
identifying a BTS in a BSC.
T
MOD
– BTSRETSUBUNI DEVICENO Number of the RET antenna. eNodeB
T
MOD
Number of the RET antenna
– BTSRETSUBUNI SUBUNITNO eNodeB
subunit.
T
MOD
Antenna tilt angle configured
– BTSRETSUBUNI TILT eNodeB
for the RET subunits.
T

DSP Indicates the device number of

– DEVICENO eNodeB
RETSUBUNIT the RET

Indicates the number of the

DSP
– SUBUNITNO RET subunit, which starts from eNodeB
RETSUBUNIT
1
DSP
Indicates the device number of
– RETDEVICEDAT DEVICENO eNodeB
the RET.
A
DSP Indicates the number of the
– RETDEVICEDAT SUBUNITNO RET subunit, which starts from eNodeB
A 1.

08/24/2023 华为保密信息,未经授权禁止扩散 第204页，共633页

 686970386.xls 文档密级

Indicates the number of the

– DSP AARU CN cabinet where the AARU is eNodeB
located.
Indicates the number of the
– DSP AARU SRN subrack where the AARU is eNodeB
located.

Indicates the slot number of

– DSP AARU SN eNodeB
the AARU.
Indicates the device number of
the VRET antenna where the
VRET subunit is contained.
– DSP VRETSUBUNIDEVICENO eNodeB
The device number of the
VRET antenna must be
unique. the number of the
Indicates
– DSP VRETSUBUNISUBUNITNO VRET subunit, which starts eNodeB
from 1.

Index type. BYNAME: query by

– DSP BTSRETSUBUIDTYPE eNodeB
name; BYID: query by index.

Index of the BTS, uniquely

– DSP BTSRETSUBUBTSID eNodeB
identifying a BTS in a BSC.

– DSP BTSRETSUBUDEVICENO Number of the RET antenna eNodeB

Number of the RET antenna

– DSP BTSRETSUBUSUBUNITNO eNodeB
subunit.

Index type. BYNAME: query by

DSP BTSRETDEV IDTYPE eNodeB
name; BYID: query by index

Index of the BTS, uniquely

– DSP BTSRETDEV BTSID eNodeB
identifying a BTS in a BSC.

– DSP BTSRETDEV DEVICENO Number of the RET antenna eNodeB

Number of the RET antenna

– DSP BTSRETDEV SUBUNITNO eNodeB
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第205页，共633页

 686970386.xls 文档密级

MAE Value Range and

Version Operation Description
Unit
Use this command to
GUI Value Range: 0 to
modify a remote
eRAN7.0 and later 125
electrical tilting (RET)
Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 1 to 8
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
modify a remote Value Range: -100 to 300
eRAN7.0 and later
electrical tilting (RET) Unit: 0.1 degree
subunit.
Use this command to
GUI Value Range:
modify a remote
eRAN7.0 and later 60~254
electrical tilting (RET)
Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 1~8
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
GUI Value Range: -
modify a remote
eRAN7.0 and later 150~150
electrical tilting (RET)
Unit: 0.1degree
subunit.
Use this command to
GUI Value Range: -
modify a remote
eRAN7.0 and later 150~150
electrical tilting (RET)
Unit: 0.1degree
subunit.
Use this command to
Default Value: BYID(By
modify a remote
eRAN7.0 and later Index)
electrical tilting (RET)
Unit: None
subunit.
Use this command to
GUI Value Range:
modify a remote
eRAN7.0 and later 0~7999
electrical tilting (RET)
Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 0~35
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
modify a remote GUI Value Range: 1~8
eRAN7.0 and later
electrical tilting (RET) Unit: None
subunit.
Use this command to
GUI Value Range: -
modify a remote
eRAN7.0 and later 100~300
electrical tilting (RET)
Unit: None
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第206页，共633页

 686970386.xls 文档密级

Use this command to

query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.
Use this command to
query a remote
eRAN7.0 and later –
electrical tilting (RET)
subunit.

08/24/2023 华为保密信息,未经授权禁止扩散 第207页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE
calculates optimization values according
to algorithm parameters:
Fixed-value requirementsincludes
and the thevalue
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.
–

08/24/2023 华为保密信息,未经授权禁止扩散 第208页，共633页

 686970386.xls 文档密级

08/24/2023 华为保密信息,未经授权禁止扩散 第209页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description

SET
– IDTYPE Index type GBSC
GCELLHO2GBA2
Index of a cell,
SET uniquely
– CELLID GBSC
GCELLHO2GBA2 identifying a
cell in a BSC.
SET 2GBA2 Input
– CELL2GBA2TAG GBSC
GCELLHO2GBA2 Tag

SET
– ITEM NCCELL No. GBSC
GCELLHO2GBA2

SET
– ITEMVALID Item Valid GBSC
GCELLHO2GBA2

SET 2G NCELL
– CELL2GBA2BCCH GBSC
GCELLHO2GBA2 BCCH
Index of a cell,
uniquely
– MOD GCELL CELLID GBSC
identifying a
cell in a BSC.

– MOD GCELL CELLNAME Name of a cell. GBSC

– MOD GCELL TYPE Freq. Band GBSC

Mobile country
– MOD GCELL MCC GBSC
code.

Mobile network
– MOD GCELL MNC GBSC
code.

Location area
– MOD GCELL LAC GBSC
code (LAC).

Identity code of
– MOD GCELL CI GBSC
a cell,
Network color
code that is
– MOD GCELL NCC provided by GBSC
the telecom
operator.
Base station
– MOD GCELL BCC color code GBSC
(BCC) of a cell,

– ADD GCELLFREQ IDTYPE Index type GBSC

08/24/2023 华为保密信息,未经授权禁止扩散 第210页，共633页

 686970386.xls 文档密级

Index of a cell,
uniquely
– ADD GCELLFREQ CELLID GBSC
identifying a
cell in a BSC.

– ADD GCELLFREQ FREQ1 Frequency 1 GBSC

– ADD GCELLFREQ FREQ2… Frequency 2 GBSC

– MOD GTRX IDTYPE Index type GBSC

Index of a
TRX, uniquely
– MOD GTRX TRXID GBSC
identifying a
TRX in a BSC.
Frequency of
– MOD GTRX FREQ GBSC
the TRX.

– MOD GCELLMAGRP IDTYPE Index type GBSC

Index of a cell,
uniquely
– MOD GCELLMAGRP CELLID Index of thea GBSC
identifying
frequency
cell in a BSC.
hopping data,
used for a TRX
– MOD GCELLMAGRP HOPINDEX GBSC
to locate the
frequency
The TSC is
hopping
short for the
– MOD GCELLMAGRP TSC sequence.
Training GBSC
Sequence
Code.
– MOD GCELLMAGRP FREQ1 Frequency 1 GBSC

– MOD GCELLMAGRP FREQ2… Frequency 2 GBSC

– MOD GEXT2GCELL EXT2GCELLID ID of the cell. GBSC

Name of the
– MOD GEXT2GCELL EXT2GCELLNAME GBSC
cell.

Mobile country
– MOD GEXT2GCELL MCC GBSC
code.

Mobile network
– MOD GEXT2GCELL MNC GBSC
code.

Location area
– MOD GEXT2GCELL LAC GBSC
code (LAC).

08/24/2023 华为保密信息,未经授权禁止扩散 第211页，共633页

 686970386.xls 文档密级

Identity code of
– MOD GEXT2GCELL CI GBSC
a cell,
BCCH
frequency of
– MOD GEXT2GCELL BCCH GBSC
an external 2G
cell.
Network color
code that is
– MOD GEXT2GCELL NCC provided by GBSC
Base station
the telecom
color code
operator.
(BCC) of a cell,
– MOD GEXT2GCELL BCC provided by GBSC
the network
planning
department.
Unique ID of a
– MOD UEXT2GCELL GSMCellIndex RNC
GSM cell
A name
identifying a
– MOD UEXT2GCELL GSMCellName RNC
GSM cell
uniquely.
Index of the
neighboring
– MOD UEXT2GCELL NBscIndex BSC for the RNC
RNC serving
the cell.
Mobile country
– MOD UEXT2GCELL MCC RNC
code.

Mobile network
– MOD UEXT2GCELL MNC RNC
code.

Location Area
– MOD UEXT2GCELL LAC Code (LAC) of RNC
the GSM cell.

Identifying a
– MOD UEXT2GCELL CID RNC
GSM cell.
Uniquely
identifying the
different
– MOD UEXT2GCELL NCC RNC
network in the
Uniquely
neighboring
identifying
area. a
neighboring
– MOD UEXT2GCELL BCC RNC
base station
with the same
Identifying
carrier.
BCCH
– MOD UEXT2GCELL BcchArfcn frequency RNC
Indicates
number ofthe the
cell ID of the
inter-RAT cell.
ADD local cell. It
– GERANNFREQGROU LocalCellId uniquely eNodeB
P identifies a cell
within an a
Indicates
ADD eNodeB.carrier
GERAN
– GERANNFREQGROU BcchGroupId eNodeB
frequencythe
Indicates
P
group. that
standard
ADD is supported by
– GERANNFREQGROU GeranVersion the current eNodeB
P carrier
frequency
group.

08/24/2023 华为保密信息,未经授权禁止扩散 第212页，共633页

 ARFCN is
between 512
and 810, this
686970386.xlsparameter 文档密级
indicates
Indicatesthe
whether the
first ARFCN in
GERAN
ADD
the GERAN
ARFCN is in
– GERANNFREQGROU StartingArfcn eNodeB
carrier
the 1800 MHz
P
frequency
band or the
ADD group.MHz
1900
– GERANNFREQGROU BandIndicator band. If the eNodeB
P GERAN
ARFCN isthe
Indicates not
MOD in eithercountry
band,
mobile
– GERANEXTERNALCE Mcc this parameter eNodeB
code of the
LL does notcell. take
external
Indicates
effect andthe can
MOD
mobile
be set tonetwork
either
– GERANEXTERNALCE Mnc eNodeB
code
value ofandtheone
LL
external
ARFCN cell.
Indicatescan the
MOD only in of
one
cell ID the
– GERANEXTERNALCE GeranCellId frequency eNodeB
external
LL band. Forcell.
GERAN
Indicates
details, see the
MOD
LAC
3GPP ofTS
the
– GERANEXTERNALCE Lac eNodeB
external
45.005.
LL
GERAN cell.
MOD Indicates the
– GERANEXTERNALCE GeranArfcn GERAN BCCH eNodeB
LL ARFCN.
Indicates the
MOD
network color
– GERANEXTERNALCE NetworkColourCode eNodeB
code (NCC) of
LL Indicates
GERAN. the
base station
MOD
BaseStationColourC color code
– GERANEXTERNALCE eNodeB
ode (BCC) of an
LL
external
ADD GERAN cell.
Indicates the
– GERANNFREQGROU LocalCellId cell ID of the eNodeB
PARFCN local cell.
Indicates the
ADD index of the
– GERANNFREQGROU BcchGroupId BCCH carrier eNodeB
PARFCN frequency
group.
Specifies the
ADD
ARFCN of the
– GERANNFREQGROU GeranArfcn eNodeB
GERAN
PARFCN
BCCH.

08/24/2023 华为保密信息,未经授权禁止扩散 第213页，共633页

 686970386.xls 文档密级

MAE Value Range

Version Operation Description
and Unit

Use this command to set the

Default Value: BYID
GBSS16.0 and later 2G BA2 parameters of a
Unit: None
cell.
Use this command to set the GUI Value Range: 0 to
GBSS16.0 and later 2G BA2 parameters of a 2047
cell. Unit: None
Use this command to set the
GBSS16.0 and later 2G BA2 parameters of a NA
cell.
Use this command to set the
Value Range: 1 to 64
GBSS16.0 and later 2G BA2 parameters of a
Unit: None
cell.
Use this command to set the
Default Value: TRUE
GBSS16.0 and later 2G BA2 parameters of a
Unit: None
cell.
Use this command to set the Value Range: 0 to
GBSS16.0 and later 2G BA2 parameters of a 1023
cell. Unit: None
GUI Value Range: 0 to
Use this command to modify
GBSS16.0 and later 2047
parameters of a cell.
Unit: None
GUI Value Range: 1 to
Use this command to modify
GBSS16.0 and later 64 characters
parameters of a cell.
Unit: None

Use this command to modify

GBSS16.0 and later NA
parameters of a cell.

GUI Value Range: 3

Use this command to modify
GBSS16.0 and later digits
parameters of a cell.
Unit: None
GUI Value Range: 2 to
Use this command to modify
GBSS16.0 and later 3 digits
parameters of a cell.
Unit: None
GUI Value Range: 1 to
Use this command to modify
GBSS16.0 and later 65533, 65535
parameters of a cell.
Unit: None
GUI Value Range: 0 to
Use this command to modify
GBSS16.0 and later 65535
parameters of a cell.
Unit: None

Use this command to modify Value Range: 0 to 7

GBSS16.0 and later
parameters of a cell. Unit: None

Use this command to modify Value Range: 0 to 7

GBSS16.0 and later
parameters of a cell. Unit: None

Use this command to add

Default Value: BYID
GBSS16.0 and later frequencies to a GSM
Unit: None
internal cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第214页，共633页

 686970386.xls 文档密级

Use this command to add GUI Value Range: 0 to

GBSS16.0 and later frequencies to a GSM 2047
internal cell. Unit: None
Use this command to add Value Range: 0 to
GBSS16.0 and later frequencies to a GSM 1023
internal cell. Unit: None
Use this command to add Value Range: 0 to
GBSS16.0 and later frequencies to a GSM 1023
internal cell. Unit: None

Use this command to modify Default Value: BYID

GBSS16.0 and later
attributes of a TRX. Unit: None

GUI Value Range: 0 to

Use this command to modify
GBSS16.0 and later 8191
attributes of a TRX.
Unit: None
Value Range: 0 to
Use this command to modify
GBSS16.0 and later 1023
attributes of a TRX.
Unit: None
Use this command to modify
Default Value: BYID
GBSS16.0 and later the records of a cell hopping
Unit: None
antenna group.
Use this command to modify GUI Value Range: 0 to
GBSS16.0 and later the records of a cell hopping 2047
antenna group. Unit: None
Use this command to modify GUI Value Range: 0 to
GBSS16.0 and later the records of a cell hopping 63
antenna group. Unit: None
Use this command to modify
Value Range: 0 to 7
GBSS16.0 and later the records of a cell hopping
Unit: None
antenna group.
Use this command to modify Value Range: 0 to
GBSS16.0 and later the records of a cell hopping 1023
antenna group. Unit: None
Use this command to modify Value Range: 0 to
GBSS16.0 and later the records of a cell hopping 1023
antenna group. Unit: None
Use this command to modify GUI Value Range:
GBSS16.0 and later the information about 2G 2048 to 12287
external cells. Unit: None
Use this command to modify GUI Value Range: 1 to
GBSS16.0 and later the information about 2G 64 characters
external cells. Unit: None
Use this command to modify GUI Value Range: 1 to
GBSS16.0 and later the information about 2G 3 characters
external cells. Unit: None
Use this command to modify GUI Value Range: 1 to
GBSS16.0 and later the information about 2G 3 characters
external cells. Unit: None
Use this command to modify GUI Value Range: 1 to
GBSS16.0 and later the information about 2G 65533, 65535
external cells. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第215页，共633页

 686970386.xls 文档密级

Use this command to modify GUI Value Range: 0 to

GBSS16.0 and later the information about 2G 65535
external cells. Unit: None
Use this command to modify Value Range: 0 to
GBSS16.0 and later the information about 2G 1023
external cells. Unit: None
Use this command to modify
Value Range: 0 to 7
GBSS16.0 and later the information about 2G
Unit: None
external cells.
Use this command to modify
Value Range: 0 to 7
GBSS16.0 and later the information about 2G
Unit: None
external cells.
Modify a GSM cell GUI Value Range: 0 to
RAN16.0 and later neighboring to the WCDMA 65535
coverage. Unit: None
Modify a GSM cell GUI Value Range: 1 to
RAN16.0 and later neighboring to the WCDMA 64 characters
coverage. Unit: None
Modify a GSM cell GUI Value Range: 0 to
RAN16.0 and later neighboring to the WCDMA 32
coverage. Unit: None
Modify a GSM cell GUI Value Range: 3
RAN16.0 and later neighboring to the WCDMA digits
coverage. Unit: None
Modify a GSM cell GUI Value Range: 2 to
RAN16.0 and later neighboring to the WCDMA 3 digits
coverage. Unit: None
Modify a GSM cell GUI Value Range: 1 to
RAN16.0 and later neighboring to the WCDMA 65533, 65535
coverage. Unit: None
Modify a GSM cell GUI Value Range: 0 to
RAN16.0 and later neighboring to the WCDMA 65535
coverage. Unit: None
Modify a GSM cell
Value Range: 0 to 7
RAN16.0 and later neighboring to the WCDMA
Unit: None
coverage.
Modify a GSM cell
Value Range: 0 to 7
RAN16.0 and later neighboring to the WCDMA
Unit: None
coverage.
Modify a GSM cell Value Range: 0 to
RAN16.0 and later neighboring to the WCDMA 1023
coverage. Unit: None
Use this command to add a GUI Value Range: 0 to
eRAN7.0 and later neighboring GERAN carrier 255
frequency group. Unit: None
Use this command to add a
Value Range: 0 to 31
eRAN7.0 and later neighboring GERAN carrier
Unit: None
frequency group.
Use this command to add a
eRAN7.0 and later neighboring GERAN carrier NA
frequency group.

08/24/2023 华为保密信息,未经授权禁止扩散 第216页，共633页

 686970386.xls 文档密级

Use this command to add a Value Range: 0 to

eRAN7.0 and later neighboring GERAN carrier 1023
frequency group. Unit: None
Use this command to add a
eRAN7.0 and later neighboring GERAN carrier NA
frequency group.
Use this command to modify GUI Value Range: 3
eRAN7.0 and later the configuration of an characters
external GERAN cell. Unit: None
Use this command to modify GUI Value Range: 2 to
eRAN7.0 and later the configuration of an 3 characters
external GERAN cell. Unit: None
Use this command to modify GUI Value Range: 0 to
eRAN7.0 and later the configuration of an 65535
external GERAN cell. Unit: None
Use this command to modify GUI Value Range: 1 to
eRAN7.0 and later the configuration of an 65533, 65535
external GERAN cell. Unit: None
Use this command to modify Value Range: 0 to
eRAN7.0 and later the configuration of an 1023
external GERAN cell. Unit: None
Use this command to modify
Value Range: 0 to 7
eRAN7.0 and later the configuration of an
Unit: None
external GERAN cell.
Use this command to modify
Value Range: 0 to 7
eRAN7.0 and later the configuration of an
Unit: None
external GERAN cell.
Use this command to add a
GUI Value Range: 0 to
GERAN ARFCN to a
eRAN7.0 and later 255
neighboring GERAN carrier
Unit: None
frequency group.
Use this command to add a
GUI Value Range: 0 to
GERAN ARFCN to a
eRAN7.0 and later 31
neighboring GERAN carrier
Unit: None
frequency group.
Use this command to add a
Value Range: 0 to
GERAN ARFCN to a
eRAN7.0 and later 1023
neighboring GERAN carrier
Unit: None
frequency group.

08/24/2023 华为保密信息,未经授权禁止扩散 第217页，共633页

 686970386.xls 文档密级

Parameter Value Type

Fixed-value parameters: includes the
parameters for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these
parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. Theparameters:
Range-value MAE obtainsinclude the values
the of
these parameters
parameters for whichfromtheNEs.
MAE
calculates optimization values according
to algorithm parameters:
Fixed-value requirementsincludes
and the thevalue
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values ofparameters:
Range-value these parameters
includebased
the
on the objects
parameters forthat
whicharethe
filtered
MAEaccording
to algorithm
calculates requirements.
optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these
parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE
Identity-related obtains the
parameters: values of
include
these parameters
parameters such as from NEs.IDTYPE,
CellId,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE
calculates optimization values according
to algorithm parameters:
Fixed-value requirementsincludes
and the thevalue
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based
on the objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第218页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE
calculates optimization values according
to algorithm parameters:
Fixed-value requirementsincludes
and the thevalue
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm parameters:
Fixed-value requirementsincludes
and the thevalue
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第219页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter
Non-MAE-optimized on the MAE
parameters:
client orthe
include on non-identity-related
NEs.
parameters that the MAE does not
optimize. The MAE obtains the values of
these parameters from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第220页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter
Non-MAE-optimized on the MAE
parameters:
client orthe
include on non-identity-related
NEs.
parameters that the MAE does not
optimize. The MAE
Identity-related obtains the
parameters: values of
include
these parameters
parameters such asfrom NEs.IDTYPE,
CellId,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第221页，共633页

 Indicates the RNC cell
ID of an external
UTRAN cell. It
686970386.xls 文档密级
uniquely identifies a
Indicates
cell withinthe an RNCRNC.cell
ID of an external
The 28-bit UTRAN
Optimization UTRAN iscell.
cell IDParameter It
comprised of
MML Command Parameter uniquely identifies a NE
Type Description
the RNC cell
Indicates the ID
RNC and cell
cell
the withinID anthatRNC.
ID
The ofRNCan external
28-bit UTRAN
are
represented
UTRAN by the
– ACT UCELL CellId cell iscell.
leastIDsignificant
It
comprised 16a of RNC
uniquely
the RNC identifies
cell ID and
bits within
cell and the most
anthatRNC.
the RNC
significant ID are
The 28-bit 12
represented UTRAN
by
bits,
the
respectively.
cell IDsignificant
is comprisedThe of
– DEA UCELL CellId least
formula for 16
calculating RNC
the
bits RNC
Indicates
and cell
themost
the ID
RNC andcell
the
ID UTRAN
RNC
of an ID cell ID
that
external areis
significant
as follows: 12
UTRANbits,
represented
UTRAN
respectively. by
cell. ItThe the
DSP cell IDsignificant
= RNC ID16 xa
– CellId least
uniquely
formula identifies
for calculating RNC
UCELLCHK 65536 + the
RNC cell ID.
bits
cell
the and
within
UTRAN an most
RNC.
cell 3GPP
ID is
For
The details,
significant
28-bit 12 see
UTRAN bits,
as
TS follows:
25.401. UTRAN
DSP respectively.
Choose
cell
cell ID
ID is = the The
scope
comprised
RNC ID x ofof
– CHECKSCOPE formula for calculating RNC
UCELLCHK Health
the
65536RNC Check
cell ID
+ RNC and
cell ID.
the UTRAN
For RNC
details, ID seecell 3GPP
that IDareis
LST as
TS follows:
25.401. UTRAN
represented by the
– UCELLACCESS CellId cell IDsignificant
least = RNC ID16 x RNC
STRICT ID
bitsofand
This
65536 the
parameterexternal
+ the
RNC most is cell.
cell ID.
The
used
For cell
to
details, ID cannot
differentiate
significant 12 bits, see 3GPP
conflict
different
TS 25.401.
respectively.with
MSsother cell
or cells.
The
MOD
– EXT3GCELLID IDs in
Scrambling
formula the BSC.
forthe codes The
calculating are GBSC
GEXT3GCELL Indicates RNC cell
cells
used
the in the
after
UTRAN BSC
spread
cellof are
IDan is
Meaning:
ID of
numbered an Type
external
spectrum.
as follows:
index Therefore,
UTRAN
MOD UTRAN
sequentially.
the cell. It of a
– IDTYPE cell bandwidth
Value ID Range:
uniquely = RNC
identifiesID x a GBSC
GEXT3GCELL signal
65536 is
+ not
RNC changed.
cell ID.
BYNAME(By
cell within an Name),
RNC.
Instead,
For details,
BYID(By signals
see
Index) from
3GPP
The 28-bit
different UTRAN
sources are
MOD TS
cell 25.401.
ID is comprised of
– SCRAMBLE differentiated. GBSC
GEXT3GCELL the RNC cellprevents ID and
Scrambling
Meaning: Indicating
the RNC ID
multiple transmitters that are
MOD whether
represented the UE by the
from usingwith
allocated theAccess
same
– UCELLACCESS CellId least
code significant
word for 16
spread RNC
STRICT Class
bits and 0 canthe be
most
Meaning:
spectrum.
allowed Indicating
to This
initiate
significant
whether
parameter the 12
isUE bits, to
used
MOD access to the radio
ISACCESSCLASS0 respectively.
allocated
differentiate with The
Access
different
– UCELLACCESS network.
formula The
for UE
calculating RNC
BARRED Class
MSs on1 can
the be
uplink
STRICT judges
Meaning:
the UTRAN whether
Indicating
cell itID and
is
allowed
differentiate
belongs to
to initiate
different
this access
MOD whether
as follows:
access tothe UE
UTRAN
the radio
cells
ISACCESSCLASS1 class on the downlink.
– UCELLACCESS cell IDbased
allocated
network. = RNCwith
The
onAccess
IDthe
UE x RNC
BARRED SIM/USIM.
Class
65536 2+whether
can
RNC For
becell ID.
STRICT judges
Meaning:
details, see Indicating
3GPP it TS
allowed
For details,
belongs to
to initiate
see
this 3GPP
access
MOD whether
25.331.
access tothethe UE radio
TS
ISACCESSCLASS2 class 25.401.
allocated based withon the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 3 can be
STRICT judges
details, whether
Meaning: see Indicating
3GPP it TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the radio
access UE
ISACCESSCLASS3 class
allocated based withon the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 4 can be
STRICT judges
details, whether
Meaning: see Indicating
3GPP it TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the radio
access UE
ISACCESSCLASS4 class
allocated based withon the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 5 can be
STRICT judges
details, whether
Meaning: see Indicating
3GPP it TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the radio
access UE
ISACCESSCLASS5 class
allocated based withon the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 6 can be
STRICT judges
details, whether
see 3GPP it TS
allowed
belongs to
to initiate
this access
MOD 25.331.
access to the radio
ISACCESSCLASS6 class based on the
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED
STRICT judges whether
details, see 3GPP it TS
belongs
25.331. to this access
class based on the
SIM/USIM. For
details, see 3GPP TS
08/24/2023 华为保密信息,未经授权禁止扩散 25.331. 第222页，共633页
 Meaning: Indicating
whether the UE
686970386.xls
allocated with Access 文档密级
Class 7 can be
Meaning:
allowed toIndicating
initiate
MOD whether
access tothe theUE radio
ISACCESSCLASS7 allocated with Access
– UCELLACCESS network. The UE RNC
BARRED Class
STRICT judges8whether
Meaning:
can be it
Indicating
allowed
belongs to to initiate
this access
MOD whether
access tothe the UE
ISACCESSCLASS8 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 9 can be it
STRICT judges
details, whether
Meaning: see Indicating
3GPP TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the
access UE
ISACCESSCLASS9 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
BARRED Class 10 can beit
STRICT judges
details, whether
Meaning: see Indicating
3GPP TS
allowed
belongs to
to initiate
this access
MOD whether
25.331.
access tothe the UE
ISACCESSCLASS1 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
0BARRED Class 11 can beit
STRICT judges
details, whether
Meaning: see Indicating
3GPP TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the
access UE
ISACCESSCLASS1 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
1BARRED Class 12 can beit
STRICT judges
details, whether
Meaning: see Indicating
3GPP TS
allowed
belongs to
to initiate
this access
MOD whether
25.331.
access tothe the UE
ISACCESSCLASS1 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
2BARRED Class 13 can beit
STRICT judges
details, whether
Meaning: see Indicating
3GPP TS
allowed
belongs to
to initiate
this access
MOD whether the
25.331. to the
access UE
ISACCESSCLASS1 class
allocatedbased with onradio
the
Access
– UCELLACCESS network.
SIM/USIM. The For UE RNC
3BARRED Class
Indicates14 can
the beit cell
RNC
STRICT judges
Meaning:
details, whether
see Indicating
3GPP TS
allowed
ID of
belongs an to initiate
external
to this access
MOD whether
25.331.
access tothe the UE radio
ISACCESSCLASS1 UTRAN
class
allocated cell.
based withonItAccess
the
– UCELLACCESS network.
uniquely
SIM/USIM. The
identifies
For UE a RNC
4BARRED Class 15 can beit
STRICT judges
cell
details, whether
within
see an RNC.TS
3GPP
allowed
belongs to
to initiate
this access
MOD The 28-bit UTRAN
25.331. to the radio
access
ISACCESSCLASS1 class
cell ID based
is on the of
comprised
– UCELLACCESS network.
SIM/USIM. The For UE RNC
5BARRED the RNC cell ID itand
STRICT judges
details, whether
the RNCsee
belongs IDthis
to
3GPP areTS
thataccess
25.331.
represented by the
MOD class based on the
– CellId least significant
SIM/USIM. For 16 RNC
UCELLSETUP
bits and
Sequence the
details, see 3GPP most TS
Number of
significant
a DL
25.331. primary 12 bits,
MOD respectively.
scrambling code Thein a
– PSCRAMBCODE formula RNC
UCELLSETUP cell. For for
detailscalculating
of this
the UTRANsee
parameter, cell 3GPP
ID is
Host type ofUTRAN
as follows:
TS 25.213. a cell
MOD when
cell IDthe= RNC RNCID node
x
– CELLHOSTTYPE RNC
UEXT3GCELL redundancy
65536 + RNC feature
cell ID.is
enabled.
For details, see 3GPP
MOD TS 25.401.
Uniquely identifying a
– CellId RNC
UEXT3GCELL neighboring RNC cell.

MOD Identifying a
– NRncId RNC
UEXT3GCELL Neighboring RNC.

MOD Primary downlink

– PSCRAMBCODE RNC
UEXT3GCELL scrambling code.

MOD Indicates the mobile

– UTRANEXTERN MCC country code of the eNodeB
ALCELL external UTRAN cell.
MOD Indicates the mobile
– UTRANEXTERN MNC network code of the eNodeB
ALCELL external UTRAN cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第223页，共633页

 Indicates the RNC ID
of the external
686970386.xls 文档密级
UTRAN cell. The 28-
Indicates
bit UTRANthe RNC
cell ID iscell
Indicates
ID of an the primary
external
MOD comprised
DL scrambles of the RNC
UTRAN
cell ID and It of
cell.the the
RNC
– UTRANEXTERN PSCRAMBCODE external UTRAN
uniquely identifiescell.
a eNodeB
ALCELL ID
Forthat are
details, see 3GPP
cell within
represented an RNC.
by the
TS 25.331.
The
MOD least28-bit UTRAN
significant 16
– UTRANEXTERN RNCID cell
bits ID
andisthe
comprised
most of eNodeB
ALCELL the RNC cell
significant 12 ID and
bits,
the
respectively. Theare
RNC ID that
MOD represented by the
formula for calculating
– UTRANEXTERN CellId least
the UTRAN cell 16
significant ID is eNodeB
ALCELL bits and the
as follows: UTRANmost
significant
cell ID = RNC 12 bits,
ID x
respectively.
65536 + RNCThe cell ID.
formula for calculating
For details, see 3GPP
the UTRAN cell ID is
TS 25.401.
as follows: UTRAN
cell ID = RNC ID x
65536 + RNC cell ID.
For details, see 3GPP
TS 25.401.

08/24/2023 华为保密信息,未经授权禁止扩散 第224页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

GUI Value Range: 0 to 65535

RAN16.0 and later Activate Cell
Unit: None

GUI Value Range: 0 to 65535

RAN16.0 and later Deactivate Cell
Unit: None

GUI Value Range: 0 to 65535

RAN16.0 and later Display Cell Health State
Unit: None

Default Value: CELLID

RAN16.0 and later Display Cell Health State
Unit: None

List Cell Access Restriction GUI Value Range: 0 to 65535

RAN16.0 and later
Information Unit: None

GUI Value Range: 5048 to 15287

GBSS16.0 and later Modify 3G External Cell
Unit: None

Default Value: BYID

GBSS16.0 and later Modify 3G External Cell
Unit: None

Value Range: 0 to 511

GBSS16.0 and later Modify 3G External Cell
Unit: None

Modify Cell Access Restriction GUI Value Range: 0 to 65535

RAN16.0 and later
Information Unit: None

Value Range: BARRED,

Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第225页，共633页

 686970386.xls 文档密级

Value Range: BARRED,

Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None
Value Range: BARRED,
Modify Cell Access Restriction
RAN16.0 and later NOT_BARRED
Information
Unit: None

GUI Value Range: 0 to 65535

RAN16.0 and later Modify Cell Basic Information
Unit: None

Value Range: 0 to 511

RAN16.0 and later Modify Cell Basic Information
Unit: None

RAN16.0 and later Modify Neighboring RNC Cell NA

GUI Value Range: 0 to 65535

RAN16.0 and later Modify Neighboring RNC Cell
Unit: None

GUI Value Range: 0 to 65535

RAN16.0 and later Modify Neighboring RNC Cell
Unit: None

Value Range: 0 to 511

RAN16.0 and later Modify Neighboring RNC Cell
Unit: None

GUI Value Range: 3 characters

eRAN7.0 and later Modify External UTRAN Cell
Unit: None

GUI Value Range: 2 to 3

eRAN7.0 and later Modify External UTRAN Cell characters
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第226页，共633页

 686970386.xls 文档密级

Value Range: 0 to 511

eRAN7.0 and later Modify External UTRAN Cell
Unit: None

GUI Value Range: 0 to 65535

eRAN7.0 and later Modify External UTRAN Cell
Unit: None

GUI Value Range: 0 to 65535

eRAN7.0 and later Modify External UTRAN Cell
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第227页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and to thealgorithm requirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
the fixed values
Range-value of these parameters
parameters: include the
based on theforobjects
parameters which that are filtered
the MAE
according
calculates to algorithm requirements.
optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第228页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs. MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of
Non-MAE-optimized each parameter
parameters:
on the MAE
include client or on NEs.
the non-identity-related
parameters that the MAE does not
optimize. The MAE
Identity-related obtains the
parameters: values
include
of these parameters
parameters from NEs.
such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第229页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第230页，共633页

 686970386.xls 文档密级

Optimizatio Parameter
MML Command Parameter NE Version
n Type Description

eRAN7.0 and
– MOD CELL LOCALCELLID Local Cell ID eNodeB
later

eRAN7.0 and
– MOD CELL PHYCELLID Physical cell ID eNodeB
later

RAN16.0 and
– MOD ULTECELL LTECELLINDEX LTE cell index RNC
later

RAN16.0 and
– MOD ULTECELL CELLPHYID Physical cell ID RNC
later

MOD
Mobile country eRAN7.0 and
– EUTRANEXTER MCC eNodeB
code later
NALCELL
MOD
Mobile network eRAN7.0 and
– EUTRANEXTER MNC eNodeB
code later
NALCELL
MOD
eRAN7.0 and
– EUTRANEXTER ENODEBID eNodeB ID eNodeB
later
NALCELL
MOD
eRAN7.0 and
– EUTRANEXTER CELLID Cell ID eNodeB
later
NALCELL
MOD
eRAN7.0 and
– EUTRANEXTER PHYCELLID Physical cell ID eNodeB
later
NALCELL

MOD GBSS16.0 and

– IDTYPE Index Type GBSC
GEXTLTECELL later

MOD GBSS16.0 and

– EXTLTECELLID Cell Index GBSC
GEXTLTECELL later

MOD GBSS16.0 and

– PCID Physical Cell ID GBSC
GEXTLTECELL later

MOD eRAN7.0 and

– LocalCellId Local Cell ID eNodeB
CELLACCESS later

MOD eRAN7.0 and

– CellBarred Cell barring state eNodeB
CELLACCESS later

MOD
eRAN7.0 and
– EUTRANINTRAF LocalCellId Local Cell ID eNodeB
later
REQNCELL
MOD
Mobile country eRAN7.0 and
– EUTRANINTRAF Mcc eNodeB
code later
REQNCELL

08/24/2023 华为保密信息,未经授权禁止扩散 第231页，共633页

 686970386.xls 文档密级

MOD
Mobile network eRAN7.0 and
– EUTRANINTRAF Mnc eNodeB
code later
REQNCELL
MOD
eRAN7.0 and
– EUTRANINTRAF eNodeBId eNodeB ID eNodeB
later
REQNCELL
MOD
eRAN7.0 and
– EUTRANINTRAF CellId Cell ID eNodeB
later
REQNCELL
MOD
No handover eRAN7.0 and
– EUTRANINTRAF NoHoFlag eNodeB
indicator later
REQNCELL
MOD
eRAN7.0 and
– EUTRANINTERF LocalCellId Local Cell ID eNodeB
later
REQNCELL
MOD
Mobile country eRAN7.0 and
– EUTRANINTERF Mcc eNodeB
code later
REQNCELL
MOD
Mobile network eRAN7.0 and
– EUTRANINTERF Mnc eNodeB
code later
REQNCELL
MOD
eRAN7.0 and
– EUTRANINTERF eNodeBId eNodeB ID eNodeB
later
REQNCELL
MOD
eRAN7.0 and
– EUTRANINTERF CellId Cell ID eNodeB
later
REQNCELL
MOD
No handover eRAN7.0 and
– EUTRANINTERF NoHoFlag eNodeB
indicator later
REQNCELL

08/24/2023 华为保密信息,未经授权禁止扩散 第232页，共633页

 686970386.xls 文档密级

MAE Value Range and

Operation Description Parameter Value Type
Unit Identity-related parameters:
include parameters such as
GUI Value Range: 0 to CellId, IDTYPE, MCC, and the
Modify a cell. 255 MOC primary key and foreign key
Unit: None Range-value
parameters. The parameters:
MAE does include
not
the parameters for which
optimize the values of these the
MAE calculates optimization
parameters.
Value Range: 0 to 503
Modify a cell. values according to algorithm
Unit: None Identity-related parameters:
requirements and the value
include parameters
range of each parameter such ason the
Modify basic information about
GUI Value Range: 0 to CellId,
MAE client or on NEs. and the
IDTYPE, MCC,
an LTE cell that is neighboring
65535 MOC primary key and foreign key
to the edge of the UMTS Range-value parameters: include
Unit: None parameters. The MAE does not
coverage area. the parameters for which the
Modify basic information about optimize the values of these
MAE calculates optimization
parameters.
an LTE cell that is neighboring Value Range: 0 to 503
values according to algorithm
to the edge of the UMTS Unit: None Identity-related parameters:
requirements and the value
coverage area. include parameters such as
range of each parameter on the
GUI Value Range: 3 CellId,
MAE client or on NEs. and the
IDTYPE, MCC,
Modify External EUTRAN Cell. characters MOC primary key and foreign key
Unit: None Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
GUI Value Range: 2 to 3 CellId, IDTYPE,
parameters. MCC, and the
Modify External EUTRAN Cell. characters MOC primary key and foreign key
Unit: None Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
Modify External EUTRAN Cell. 1048575 MOC primary key and foreign key
Unit: None Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
Modify External EUTRAN Cell. 255 MOC primary key and foreign key
Unit: None Range-value
parameters. The parameters:
MAE does include
not
the parameters for which
optimize the values of these the
MAE calculates optimization
parameters.
Value Range: 0 to 503 Fixed-value parameters: includes
Modify External EUTRAN Cell. values according to algorithm
Unit: None the parameters for which the
requirements and the value
MAE provides built-in default
range of each parameter on the
values that or
MAE client cannot be modified
on NEs.
Modify the GSM data about an Default Value: BYID
by users. The MAE delivers the
external LTE cell. Unit: None Identity-related parameters:
fixed values of these parameters
include
based on the objectssuch
parameters thatasare
GUI Value Range: 8048 to CellId, IDTYPE, MCC, and the
filtered according to algorithm
Modify the GSM data about an
18287 MOC primary key and foreign key
requirements.
external LTE cell. Range-value parameters: include
Unit: None parameters. The MAE does not
the parameters for which
optimize the values of these the
MAE calculates optimization
parameters.
Modify the GSM data about an Value Range: 0 to 503
values according to algorithm
external LTE cell. Unit: None Identity-related parameters:
requirements and the value
include parameters
range of each parameter such ason the
GUI Value Range: 0 to CellId,
MAE client or on NEs. and the
IDTYPE, MCC,
Modify "Cell barring state" with
255 MOC primary key and foreign key
E-UTRAN Cell. Range-value parameters: include
Unit: None parameters. The MAE does not
the parameters for which
optimize the values of these the
Value Range:
MAE calculates optimization
parameters.
Modify "Cell barring state" with CELL_BARRED,
values according to algorithm
E-UTRAN Cell. CELL_NOT_BARRED Identity-related parameters:
requirements and the value
Unit: None include parameters such as
Modify "No handover indicator" range of each parameter on the
GUI Value Range: 0 to CellId,
MAE client or on NEs. and the
IDTYPE, MCC,
in the Intra-Frequency
255 MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 3 CellId, IDTYPE,
parameters. MCC, and the
in the Intra-Frequency
characters MOC primary key and foreign key
Neighboring Relation with E-
Unit: None parameters. The MAE does not
UTRAN Cell.
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第233页，共633页

 686970386.xls 文档密级
Identity-related parameters:
include parameters such as
Modify "No handover indicator"
GUI Value Range: 2 to 3 CellId, IDTYPE, MCC, and the
in the Intra-Frequency
characters MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
in the Intra-Frequency
1048575 MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
in the Intra-Frequency
255 MOC primary key and foreign key
Neighboring Relation with E- Range-value parameters: include
Unit: None parameters. The MAE does not
UTRAN Cell. the parameters for which the
Modify "No handover indicator" Value Range: optimize the values of these
MAE calculates optimization
parameters.
in the Intra-Frequency PERMIT_HO_ENUM,
values according to algorithm
Neighboring Relation with E- FORBID_HO_ENUM Identity-related parameters:
requirements and the value
UTRAN Cell. Unit: None include parameters such as
Modify "No handover indicator" range of each parameter on the
GUI Value Range: 0 to CellId,
MAE client or on NEs. and the
IDTYPE, MCC,
in the Inter-Frequency
255 MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 3 CellId, IDTYPE,
parameters. MCC, and the
in the Inter-Frequency
characters MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 2 to 3 CellId, IDTYPE,
parameters. MCC, and the
in the Inter-Frequency
characters MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
in the Inter-Frequency
1048575 MOC primary key and foreign key
Neighboring Relation with E- Identity-related
Unit: None parameters. Theparameters:
MAE does not
UTRAN Cell. include
Modify "No handover indicator" optimizeparameters
the values such as
of these
GUI Value Range: 0 to CellId, IDTYPE,
parameters. MCC, and the
in the Inter-Frequency
255 MOC primary key and foreign key
Neighboring Relation with E- Range-value parameters: include
Unit: None parameters. The MAE does not
UTRAN Cell. the parameters for which the
Modify "No handover indicator" Value Range: optimize the values of these
MAE calculates optimization
parameters.
in the Inter-Frequency PERMIT_HO_ENUM,
values according to algorithm
Neighboring Relation with E- FORBID_HO_ENUM
requirements and the value
UTRAN Cell. Unit: None
range of each parameter on the
MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第234页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE Version
Type Description

Indicates the
– MOD RETSUBUNIT DEVICENO device number of eNodeB eRAN7.0 and later
the RET.
Indicates the
number of the RET
– MOD RETSUBUNIT SUBUNITNO eNodeB eRAN7.0 and later
subunit,
Indicateswhich
the
starts from
antenna tilt 1.
of the
RET subunit. If this
– MOD RETSUBUNIT TILT parameter is set to eNodeB eRAN7.0 and later
32767, it is invalid
and the actual tilt is
not changed.

08/24/2023 华为保密信息,未经授权禁止扩散 第235页，共633页

 686970386.xls 文档密级

Operation Description MAE Value Range and Unit Parameter Value Type
Identity-related parameters:
include parameters such as
Use this command to CellId, IDTYPE, MCC, and the
GUI Value Range: 0 to 125
modify a remote electrical MOC primary key and foreign
Unit: None Identity-related
tilting (RET) subunit. key parameters.parameters:
The MAE does
include parameters
not optimize suchofas
the values these
Use this command to CellId, IDTYPE,
parameters. MCC, and the
GUI Value Range: 1 to 8
modify a remote electrical MOC primary key and foreign
Unit: None Range-value parameters:
tilting (RET) subunit. key parameters. The MAE does
include
not optimize the values for
the parameters of these
Use this command to Value Range: -100 to 300, which the MAE calculates
parameters.
modify a remote electrical 32767 optimization values according to
tilting (RET) subunit. Unit: 0.1degree algorithm requirements and the
value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第236页，共633页

 686970386.xls 文档密级

Threshold for inter-

Optimizatio frequency cell
MML Command Parameter Parameter Description
measurements in idle NE
n Type
mode in SIB3. When
the
Thequality
logical(CPICH
cell ID
MOD Ec/No measured
– CellId uniquely identifiesby a the
cell RNC
UCELLSELRESEL UE)
in a radio network. cell
of the serving
is lower than this
threshold plus the value
MOD
– IdleSintersearch of Qqualmin for the cell, RNC
UCELLSELRESEL Ratio of the number
inter-frequency cell of
HSDPA
measurements areload
users for
The logical
balancing
started. Whenincell ID with
a cell
this
– MOD UCELLCAC CellId uniquely
parameter is set toa127,
the HSDPA identifies
load cell RNC
in a radio
balancing network.
DRD
inter-frequency cell
algorithm
measurements basedare on the
number of users.
performed. For details The
– MOD UCELLCAC LoadBalanceRatio RNC
load
aboutvalue
Ratio of
this isnumber
calculated
theparameter, of
using
HSDPA
see 3GPP theusers
HSDPA for load
TS 25.304. load
The logicalin
balancing DRD
cell ID with
a cell
– ADD UCELLCAC CellId algorithm
uniquely
the HSDPA based
load onathe
identifies cell RNC
values
in a radio
balancing of network.
DRD
Path loss based
LoadBalanceRatio
algorithm threshold onand for
the
cell edge
MaxHsdpaUserNum.UEs.
number of users. The If a UE
– ADD UCELLCAC LoadBalanceRatio accesses RNC
load valueaishigh-bandcalculated
cell
usingand the itsHSDPA
path loss loadis
Path
equal loss
to orthreshold
greater for
than
balancing
cell center DRD
UEs.the If aUE UE
– MOD UCELLDRD CellId this
Uniquethreshold,
algorithm IDbased
oflow-band
a cell.on theis RNC
accesses
considered a as a cell
values
cell and of path
edge UE.itsWhen
LoadBalanceRatio
loss
theand is
equal to or
conditions for UE less than
PathlossThdForEdg MaxHsdpaUserNum.
this threshold, the UE is
– MOD UCELLDRD location-based multi- RNC
e considered as a cell
band DRD are met, the
center UE. When
UE performs the DRD the
conditions for UE
PathlossThdForCent procedure towards a
– MOD UCELLDRD location-based
low-band cell inmulti- the RNC
er
band
same DRD sector are met,the
under the
UE performs
same NodeB. For the DRD
MOD procedure
details towards
this a
– RNCId ID of anabout
high-band RNC. RNC
UINTERFREQNCELL parameter, seein3GPP
cell the
same sector
TS 25.215. under the
same NodeB. For
MOD details
– CellId Uniqueabout ID of athis cell. RNC
UINTERFREQNCELL parameter, see 3GPP
TS 25.215.
MOD Unique RNC ID of a
– NCellRncId RNC
UINTERFREQNCELL neighboring
Offset of the cell. measured
CPICH RSCP used for
MOD cell reselection
Unique ID of a when
– NCellId the UE
Offset is
of in idle
the mode.
measured RNC
UINTERFREQNCELL neighboring cell.
In a cellRSCP
CPICH reselection
used for
procedure,
cell reselection the RNCwhen
MOD subtracts
the UE is this
in offset
idle mode.
– SIB11Ind RNC
UINTERFREQNCELL from the measured
CPICH
In a cell
Offset ofRSCP of a
reselection
the measured
neighboring
procedure,
CPICH Ec/No cell
the RNC
used andfor
MOD thenreselection
ranksthis all offset
– IdleQoffset1sn subtracts
cell when RNC
UINTERFREQNCELL neighboring cells. For
fromUE
the theismeasured
in idle mode.
details,
In a cell reselectionTS
CPICH see
RSCP 3GPP
of a
MOD 25.304.
neighboring
procedure, cellRNC
the and
– IdleQoffset2sn then ranksthis all offset RNC
UINTERFREQNCELL subtracts
neighboring
from the measured cells. For
details, Ec/No
CPICH see 3GPP of a TS
25.304.
neighboring cell and
then ranks all
neighboring cells.
08/24/2023 华为保密信息,未经授权禁止扩散 第237页，共633页
 Maximum number of
686970386.xls
inter-RAT RAB directed 文档密级
retries. It decides the
size of a candidate set
for inter-RAT DRD. A
– ADD UCELLDRD CellId Unique ID set
candidate of afor cell. inter- RNC
RAT DRD includes the
Whether
neighboring to enableGSM the
cells
Whether
Whether
power load
to
balancing balancing
activate DRD the
that are
DRD selected based
or multi-carrier
– ADD UCELLDRD DRMaxGSMNum service-based
algorithm for DCHDRD RNC
on
HSPA+ the priority
technical of blind
algorithm.
services.
handovers This
During
and service
allow
Whether
satisfaction-based
algorithm
setup or tois enable
activated the
DRD
directed
power
considering
Load retry.
balancing
threshold load This
for DRD DCH
ServiceDiffDrdSwitc reconfiguration,
only
parameterwhen this can switch
be this is
– ADD UCELLDRD algorithm
difference for
is HSDPA
based RNC
h UEs
turned
algorithmto on.
configured
trigger In
enables power
such
atusertheinservice aon
the
cell
services.
power
balancing
Whether
case,
BSC6910 or to
the During
onDRD enable
BSC6910
to the
the
level.
setup
number.
downlink. The
orcells value 0
code
selects balancing
preferentially with
set DRD the
up
indicates
reconfiguration,
this parameter that inter-RAT this
isisset
– ADD UCELLDRD LdbDRDSwitchDCH If LdbDRDchoice
algorithm.
highest
services
RAB DRD inDuring
service notpriority
iscells with set RNC
algorithm
to Power,
UserNumber,
service
for
more enables
load
setup ordownlink
UEavailable
access. a the
load-
applicable.
BSC6910
Network
balancing to
resource
DRD is or multi-
type
likely
reconfiguration,
power resources this
based
preferentially
carrier
when
to
on be
algorithm
the HSPA+
selecting
triggered
power enables set for
resource up
technical
the DCH
the
LdbDRDSwitchHSD
– ADD UCELLDRD services
usage in in
satisfaction-based
secondary
services
BSC6910 when
theto cells
carrier the
current with DRD
for cell RNC
PA
more
remaining available
considering
multi-carrier
preferentially
and inter-frequency load
HSDPA
equivalent power
set up
resources
difference
users
number
services
neighboringbased inbased
of is
DL based
on
cells R99
cells. theon
withThen,the
on
power
power.
load.
users
more resource
When
that
available
power resources are can this usage
access
code
– ADD UCELLDRD LdbDRDchoice in the current cell and RNC
If
thethis
parameter parameter
current
resources
balanced iscell
based
among set istoisless
on set
inter-
inter-frequency
to
code UserNumber,
UserNumber,
than
frequencythe
resourcevaluecells.of the load
usage this in
neighboring
balancing
secondary
parameter.
the best cellDRD cells.
carrier
and Then,
orinter-
multi-
is
SecCellLdbDrdChoic carrier
power resources
HSPA+ are
technical
– ADD UCELLDRD selected
If LdbDRDchoice for
frequency neighboring multi-carrieris set RNC
e balanced
satisfaction-based among inter-
DRD
HSDPA
to Power
cells. Then, users
and code based on
frequency
considering
the number
PowLoadDRDOptSwitc
resources cells.
are load
of HSDPA
balanced
Frequency band of the
difference
LdbDRDLoadRemai users. When
h is setuplink
among to OFF,is based
inter-frequencythisa load- on
– ADD UCELLDRD target and RNC
nThdDCH user
parameter
balancingnumber.
cells. When is
DRD The
set is
this switchto user
likely
downlink UARFCNs to
number
Power,
to
is be triggered
turned refers
the on and to
secondary
forthetheDCH
which
Load
Threshold a UE
threshold for is for for
minimum
number
carrier
services isof equivalent
selected
when the
LdbDRDLoadRemai DR_RAB_SING_DRD_
redirected
HSDPA
remaining
downlink
multi-carrier
remaining UEsR99
after
SF
DL toin cell
trigger
users
HSDPA
non- the
– ADD UCELLDRD SWITCH
admission check
fails. box
IfDRD this RNC
nThdHSDPA power
best cell
performing
users
HSPA balancing
based
powerfor the
DCHon
in to code
the
under
parameter
in the the
downlink. DrSwitch
is set
balancing
services
power.
current
parameter orDRD
cell inthe
isthe number
less SETthan
Threshold
DependOnNCell,
algorithm. for
The code
code the
of
the
CodeBalancingDrdS BSC6910HSDPA
value
UCORRMALGOSWITC
resource of users
usage this inthe the
– ADD UCELLDRD balancing selects
DRD RNC
witch performing
parameter.
H
bestcommand
cell for HSDPA
is selected,
the code
target
algorithm UARFCNs can applies of
be is setto
services.
If LdbDRDchoice
this algorithm
balancing DRD
neighboring
enabled only cells
when thatthe
tosingle
a Power
algorithm.
are on the and
service.
The
same code When
CodeBalancingDrdM minimum
PowLoadDRDOptSwitc
this switchDRD remaining
is turned SF
on
– ADD UCELLDRD balancing
frequency band as the RNC
inSFThd in
h the
is setbest
and thecellcan to cell
ON, ais load-
algorithm
source
greater than but behave
or equal to
balancing
DR_RAB_COMB_DRD
enabled
different onlyDRD
frequencies when is likelythe
the
to value
be the
triggered of this for DCH
CodeBalancingDrdC _SWITCH
minimum
from
parameter
check
remaining
sourceand the
box
cell
the SF
code
– ADD UCELLDRD services
under the whenDrSwitch RNC
odeRateThd in the
during
Whether
resource best
bind the cell
usage is
handovers.
target inSET UL
the
remaining
parameter
greater
In addition,
UARFCN than tototal
inthe theDL
the
which value the
best
power cellin
UCORRMALGOSWITC is
the greater
current than
cell
of
BSC6910
UE
or is
equal redirected
to excludes
the valueneeds the
of
– ADD UCELLDRD ReDirBandInd is
H less
command than
CodeBalancingDrdMinS
target
to UARFCNs TRUE
be configured. the
is valuefor of
selected, RNC
CodeBalancingDrdCod
this parameter.
algorithm applies
FThd andthat
inter-frequency
indicates
eRateThd. the the codeRRC UL to
combined
resource
DRD. It is needs tothe
UARFCN services.
usage in In
be
actual
best
recommended
ReDirUARFCNUplin configured. situations,
cell is greater
FALSE that you than
this
– ADD UCELLDRD Whether
areequal
or advised DC-HSDPA
to thetoUARFCN
enable
value RNC
kInd parameter
indicates
Target uplinkthatbe set
the UL of
to
UEs
this
of enable
algorithm
a parameter.
DependOnNCell
UARFCN cell forneed the
RRC innotuplink
indoor
without
be
load balancing
scenarios.
the consideration
manually
redirection. Note
configured
The value thatof the
ReDirUARFCNUplin algorithm
power to select
balancing a cell
– ADD UCELLDRD neighboring
and it is
range of the UL DRD
cells
automatically under RNC
k Target
with the
algorithm
the DL
neighboring
configured UARFCN
primary
prevails
according carrier
RNC, whenfor
to
UARFCN depends on
the
during RRC
power
thatvalue
the the
is, in the
relation redirection.
of access.
balancing
non- the
between If
Different values of on
ReDirUARFCNDown thisDRD switch
overlapped
UL andalgorithm
RedirBandInd. DL is turned
network.
UARFCNs. and
– ADD UCELLDRD RedirBandInd
and
This helps avoid self-has
code the serving
balancing cell
DRD RNC
link
correspond
the same are
algorithm
redirection. toboth
downlink
Self- different load
value
as ranges
a neighboring
enabled.
redirection is aofprocess
thecell
UARFCN.
ULLdbDRDSwitchDc during
in which load thebalancing
target cell
– ADD UCELLDRD RNC
HSDPA DRD for HSDPA
for redirection has the
services,
same UARFCN the BSC6910 as the
selects
source cell the and cell with the UE the
primary
still initiates carrier access in
according
the sourcetocell. the
number of uplink
08/24/2023 华为保密信息,未经授权禁止扩散 equivalent users 第238页，共633页
admitted to the primary
serving cell and the
uplink load of the target
 load balance
terminal type DRD hierarchy in
the uplink. When
algorithm. If the this
remaining
switch number
is turned on,ofthe
686970386.xlsequivalent
BSC6910 selects users ina the cell 文档密级
Whether
uplink is less
mapping the
to the HSPA+
RNC
than DPG the
technical
considers
valuethe
with compliance
of highest
this load in of
theparameter
cells
candidateis
when DC-HSDPA
terminal considered
target
type priority cellsin for
UEs
the
when
ULLdbDRDLoadRe terminal periodic
access the selecting
access. Directed
a
cell, load target
– ADD UCELLDRD RNC
mainThdDcHSDPA Retry
cell forDecision
balancing
When periodic
this DRD
switch (DRD)
Directed
is is
process
Retry
triggered
turned on and
Decision
forand blind
DC- (DRD).
Whether
handover-based toparameter
enable the
When
HSDPA this
DR_RAB_SING_DRD_
algorithm UEsof andnon-
UE the is
– ADD UCELLDRD DPGDRDSwitch periodic
set
target
SWITCHto TRUE,
DC DRD
incell SET process.
the
with RNCa RNC
location-based
If this
considers parameter the multi-
load is set
in
largerDRD.
band remaining
UCORRMALGOSWITC In the
to ON,
candidate
number
H is on, setupaofcelltargetwith
equivalent
this algorithm higher
cells
service
HSPA+ technical ora target
HSPAPlusSatisSwitc when
users
applies selecting
into
reconfiguration the uplink
a single phase, is
– ADD UCELLDRD compliance
cell for periodic
selected
service. as is
the DRD.
primary- A RNC
h this algorithm
preferentially
cell
carrierin
Threshold
When the LDR
cell switch
this for
of selected
DC-
the or OLC
is
determines
as
or the DRD
CLB state that
target
cannot cell cellbe
Service
HSDPA
percentage
turned
edge on
UEs type
UEs. and
and ofallowing
cell
HRetryTargCellLoad in
the the
selected periodic
algorithm
remaining as theof
resourcesDRDtarget
UE
– ADD UCELLDRD
StusInd
DR_RAB_COMB_DRD
center
process
cell. UEsand should
blind befor RNC
location-based
selecting
_SWITCH
served by alow-
intarget
SET multi-
or cell
high-
handover-based
When
band
Path
for thisthreshold
DRD.
loss parameter
UE-location-based
UCORRMALGOSWITC Whenis, non-
thisforis
band
periodic
set to cells.
DRD
FALSE, That process.
the RNCthis
parameter
cellis edge
BasedUELocDRDS multiple-band
H on, this
algorithm is
UEs.
enables set to
If a cell
directed
algorithm RT
UE
– ADD UCELLDRD If this not
does
(such
accesses
retry.
applies parameter
consider
astoconversational
When acombined
high-band
the istheset RNC
witch edge
to
load OFF,inUEs the in
candidate a
HSPA+ high- target
or
cell streaming
and
percentage
services.
band its path
of
cell compliance
to services),
loss
performfor is
the
Path
technical
cells
UE
equal loss
when threshold
location-based
to or selecting
greater of
ain
than
remaining
DRD
cell procedure
center resources
UEs. towards
If a UE
TraffTypeForBased acells
target is
multi-band not
cell considered
for
DRD periodic
– ADD UCELLDRD this
a cellthreshold,
low-band
accesses
in
DRD.the for
exceeds
DRD cell
a process.
the
low-bandintakes
this UE is
the RNC
UELoc effect
considered
threshold,
same sector real-time
theas a cell
BSC6910
under the
cell
This and
services.
edge UE. its
parameterWhen path
When isloss
this
thean is
selects
same
equal this
NodeB
to or cell
less and as
than the
advanced
parameter
conditions parameter.
iscenter
for set
UEto NRT
PathlossThdForEdg target
enables
this
To
(such modify
cell
as
cell
threshold, of
this
background
UE-the UE UEs is
or
– ADD UCELLDRD location-based
in a low-band multi-
multiple-
cell to RNC
e considered
parameter,
interactive as a
contact cell
band
perform
center
Huawei
DRD theservices),
directed
UE.
Customer
areDRD
When
met, the
retry. theIf
UE location-based
performs
LdbDRDchoice
procedure the
towards is DRD
seta to
conditions
Service
multi-band Center for
DRD UE for takes
PathlossThdForCent procedure
UserNumber,
high-band towards
cell the
in the a
– ADD UCELLDRD location-based
technical
effect
low-band for support.
non-real-time
cell in multi-
the RNC
er percentage
same sector ofunder
band
services.
same DRD
sector are met,the
under the
the
remaining
same
UE NodeB.
performs resources
the DRD in
same
the cell NodeB.
equals For
the
BasedUELocDRDRe procedure
details about towards a
– ADD UCELLDRD percentage
high-band ofthis
cell the
in the RNC
mainThd parameter, see 3GPP
remaining
same sector HSDPA under UE the
TS
number25.215.
same NodeB. For If
resources.
LdbDRDchoice
details about this is set to
Power, the
parameter, see 3GPP percentage
of
TSremaining
25.215. resources
in the cell equals the
percentage of the
remaining downlink
power resources. For
example, when the
percentage of
remaining resources in
cell A exceeds this
threshold in the ADD
UCELLDRD command
with CellID set to A, cell
A can be selected as
the target cell for UE-
location-based multiple-
band directed retry.

08/24/2023 华为保密信息,未经授权禁止扩散 第239页，共633页

 686970386.xls 文档密级

MAE Value Range

Version Operation Description
and Unit

GUI Value Range: 0

Modify cell selection and
RAN16.0 and later to 65535
reselection information.
Unit: None
Value Range: -16 to
Modify cell selection and
RAN16.0 and later 10, 127
reselection information.
Unit: 2dB
Use this command to modify
GUI Value Range: 0
cell-oriented Call Admission
RAN16.0 and later to 65535
Control (CAC) algorithm
Unit: None
parameters.
Use this command to modify
Value Range: 0 to
cell-oriented Call Admission
RAN16.0 and later 100
Control (CAC) algorithm
Unit: %
parameters.
Use this command to add cell-
GUI Value Range: 0
oriented Call Admission
RAN16.0 and later to 65535
Control (CAC) algorithm
Unit: None
parameters.
Use this command to add cell-
Value Range: 0 to
oriented Call Admission
RAN16.0 and later 100
Control (CAC) algorithm
Unit: %
parameters.
Use this command to modify
GUI Value Range: 0
the Cell-Oriented Directed
RAN16.0 and later to 65535
Retry Decision (DRD)
Unit: None
algorithm parameters of a cell.
Use this command to modify
Value Range: 50 to
the Cell-Oriented Directed
RAN16.0 and later 200
Retry Decision (DRD)
Unit: dB
algorithm parameters of a cell.
Use this command to modify
Value Range: 50 to
the Cell-Oriented Directed
RAN16.0 and later 200
Retry Decision (DRD)
Unit: dB
algorithm parameters of a cell.
Use this command to modify GUI Value Range: 0
RAN16.0 and later the information about an inter- to 4095
frequency neighboring cell. Unit: None
Use this command to modify GUI Value Range: 0
RAN16.0 and later the information about an inter- to 65535
frequency neighboring cell. Unit: None
Use this command to modify GUI Value Range: 0
RAN16.0 and later the information about an inter- to 4095
frequency neighboring cell. Unit: None
Use this command to modify GUI Value Range: 0
RAN16.0 and later the information about an inter- to 65535
frequency neighboring cell. Unit: None
Use this command to modify
RAN16.0 and later the information about an inter- NA
frequency neighboring cell.
Use this command to modify
RAN16.0 and later the information about an inter- NA
frequency neighboring cell.
Use this command to modify Value Range: -50 to
RAN16.0 and later the information about an inter- 50
frequency neighboring cell. Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第240页，共633页

 686970386.xls 文档密级

Use this command to add the

GUI Value Range: 0
Cell-Oriented Directed Retry
RAN16.0 and later to 65535
Decision (DRD) algorithm
Unit: None
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第241页，共633页

 686970386.xls 文档密级

Use this command to add the

Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.
Use this command to add the
Value Range: 50 to
Cell-Oriented Directed Retry
RAN16.0 and later 200
Decision (DRD) algorithm
Unit: dB
parameters to a cell.
Use this command to add the
Value Range: 50 to
Cell-Oriented Directed Retry
RAN16.0 and later 200
Decision (DRD) algorithm
Unit: dB
parameters to a cell.
Use this command to add the
Cell-Oriented Directed Retry
RAN16.0 and later NA
Decision (DRD) algorithm
parameters to a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第242页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Range-value parameters:
does not optimize include
the values the
of these
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Range-value parameters:
does not optimize include
the values the
of these
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Range-value parameters:
does not optimize include
the values the
of these
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Range-value parameters:
does not optimize include
the values the
of these
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters: include
range of each the
parameter
parameters for which the
on the MAE client or on NEs.MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize theparameters:
Non-MAE-optimized values of these
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. Theparameters:
Range-value MAE obtainsinclude
the values
the
of these parameters
parameters for whichfrom NEs.
the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第243页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize theparameters:
Non-MAE-optimized values of these
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第244页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters:
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
Non-MAE-optimized parameters:
of these parameters from NEs.
include the non-identity-related
parameters that the MAE does not
optimize. Theparameters:
Range-value MAE obtainsinclude
the values
the
of these parameters
parameters for whichfrom NEs.
the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs.MAE
calculates optimization values
according to algorithm requirements
and the value range of
Non-MAE-optimized each parameter
parameters:
on the MAE
include client or on NEs.
the non-identity-related
parameters that the MAE does not
optimize. The MAE obtains the values
of these parameters from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第245页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description
Type
Indicates the RX cell levelID of the
MOD local cell.for
required It uniquely
a neighboring
– LocalCellId
EUTRANINTERNFREQ identifies
cell on theathe
Indicates cell
frequency within to
minimum an RX
eNodeB.
Indicates
become
level the
a candidate
required DL EARFCN
for a for
of the neighboring
reselection
neighboring ifcell
theon cell
theonof
priority
MOD
– DlEarfcn neighboring
the frequency
frequency to become is E-UTRAN
higher a than
EUTRANINTERNFREQ
frequency.
that of the for
candidate Forreselection
serving details, see if
the 3GPP TS
frequency.
priority After
of 36.104.
the frequency
MOD measurements
is lower than that areofstarted
the
– ThreshXhigh
EUTRANINTERNFREQ for neighboring
serving frequency. cellsAfter on the
frequency, the UE
measurements arereselects
started
to
for aneighboring
neighboring
Indicates the measurement cell on the
cells
MOD frequency only if the RX
– ThreshXlow frequency,
triggering threshold the UE reselects
for
EUTRANINTERNFREQ level of the to cellinter-iscell
better
to a neighboring
reselection on the
than
frequency
Indicates
frequencythe value only
whether
or specified
if the
inter-RAT to set by
RXcells.
the
Indicates
this
level parameter
of the the local
serving for aID ofisthe
time-to-
cell
– MOD CELLRESEL LocalCellId measurement
If the
cell. cell
It than reselection
uniquely triggering
identifies priority
a
trigger.
lower
threshold
of a within Forfor
frequency adetails,
specified
reselection
or RAT seeis to
cell
3GPP a BS..
higher TS
threshold
inter-frequency
than 36.331.
and that thator of
thethe cell
of inter-RAT
is higher
cells.
serving If than
this the
parameter
frequency,
Indicates the threshold value
the is UEs set
used
– MOD CELLRESEL SNonIntraSearchCfgInd specified
to
in NOT_CFG,
always
the by inter-frequency
start
evaluation this theparameter
ofUE
for
or a time-to-trigger.
continuously
inter-RAT
reselection measures
tomeasurements.
a cell on Fora
details,
If the cell
lower see
intra-frequency 3GPP
reselection
priority E-UTRAN TS
or inter-RAT priority
36.331.
cells, irrespective
of a frequency
frequency or onisan ofinter-
lower thethan
– MOD CELLRESEL SNonIntraSearch signal quality of of the serving
or
RAT equal to that
frequency. Cellthe
cell.
serving
reselection frequencyto a celloron if the
a
cell reselection
lower priority E-UTRAN priority of an
– MOD CELLRESEL ThrshServLow RAT is lower
frequency or on than anthat inter- of the
serving
RAT frequency,
frequency the UEs
is performed
Indicates
start thethe
inter-frequency
if no cell on cellserving
ID of or the
inter-
MOD local cell.
RAT measurements
frequency It uniquely
or on a higher only
– EUTRANINTERFREQNCEL LocalCellId identifies
when the
priority avalue
E-UTRAN cell within Cellan
of frequency
L eNodeB.
selection
fulfills RX level
criteria 1 for value inter-
MOD (dB) is lower
frequency
Indicates and
the than or country
inter-RAT
mobile equal
– EUTRANINTERFREQNCEL Mcc Indicates
to theofvalue
reselections.
code the theE-UTRAN
eNodeB
ofFor thisdetails,
L identity
parameter.
see 3GPP
neighboring of the TS inter-
cell.36.304.
frequency neighboring cell.
MOD Indicates
It uniquelythe mobile an
identifies
– EUTRANINTERFREQNCEL Mnc Indicates
network code
eNodeB the local
within ofa the identity
PLMN. E- The of
L the
UTRAN
28-bit inter-frequency
neighboring
E-UTRAN cell cell.identity
neighboring
is comprised cell.
of It uniquely
the cell
MOD Indicates
identifies the
a cell offset for the
identity and
inter-frequency the within eNodeB
neighboring
an
– EUTRANINTERFREQNCEL eNodeBId eNodeB. The 28-bit E-
identity
cell, which (representedused inisby the
isidentity
L UTRAN cell
most significant
evaluation for cell 20 bits).
comprised
The cell global of the cell identity
identity (CGI)
MOD reselections. A larger value
(represented
an E-UTRAN by the
cell least
is in a
– EUTRANINTERFREQNCEL CellId of this parameter results
significant
comprised eight
of thebits) E-UTRAN and
L lower probability of cell
the
cell eNodeB
identity and identity. the PLMN The
reselections.
cell global If this
identity (CGI) of
MOD ID. For details, see 3GPP
parameter
an E-UTRAN is not
cell set
is to dB0,
– EUTRANINTERFREQNCEL CellQoffset
itTS
is 36.413.
delivered
comprised of the in SIB5. E-UTRAN For
L
details, see 3GPP
cell identity and the PLMN TS
36.331. If this parameter
ID. For details, see 3GPPis
set to
TS 36.413. dB0, it is not delivered
in SIB5. In this situation,
UEs use 0 dB as the offset
for cell reselections. For
details, see 3GPP TS
36.304.

08/24/2023 华为保密信息,未经授权禁止扩散 第246页，共633页

 686970386.xls 文档密级

MAE Value Range and

NE Version Operation Description
Unit
Use this command to modify
the configuration of a GUI Value Range: 0 to 255
eNodeB eRAN7.0 and later
neighboring E-UTRAN Unit: None
frequency.
Use this command to modify
the configuration of a
eNodeB eRAN7.0 and later NA
neighboring E-UTRAN
frequency.
Use this command to modify
the configuration of a Value Range: 0 to 31
eNodeB eRAN7.0 and later
neighboring E-UTRAN Unit: 2dB
frequency.
Use this command to modify
the configuration of a Value Range: 0 to 31
eNodeB eRAN7.0 and later
neighboring E-UTRAN Unit: 2dB
frequency.
Use this command to modify
GUI Value Range: 0 to 255
eNodeB eRAN7.0 and later the parameters about cell
Unit: None
reselection.
Use this command to modify
eNodeB eRAN7.0 and later the parameters about cell NA
reselection.
Use this command to modify
Value Range: 0 to 31
eNodeB eRAN7.0 and later the parameters about cell
Unit: 2dB
reselection.
Use this command to modify
Value Range: 0 to 31
eNodeB eRAN7.0 and later the parameters about cell
Unit: 2dB
reselection.
Use this command to modify
the neighboring relation with GUI Value Range: 0 to 255
eNodeB eRAN7.0 and later
an inter-frequency E- Unit: None
UTRAN cell.
Use this command to modify
GUI Value Range: 3
the neighboring relation with
eNodeB eRAN7.0 and later characters
an inter-frequency E-
Unit: None
UTRAN cell.
Use this command to modify
GUI Value Range: 2 to 3
the neighboring relation with
eNodeB eRAN7.0 and later characters
an inter-frequency E-
Unit: None
UTRAN cell.
Use this command to modify
GUI Value Range: 0 to
the neighboring relation with
eNodeB eRAN7.0 and later 1048575
an inter-frequency E-
Unit: None
UTRAN cell.
Use this command to modify Value Range: dB-24, dB-22,
the neighboring relation with GUI Value
dB-20, Range:
dB-18, 0 todB-14,
dB-16, 255
eNodeB eRAN7.0 and later
an inter-frequency E- Unit: None
dB-12, dB-10, dB-8, dB-6,
UTRAN cell. dB-5, dB-4, dB-3, dB-2, dB-
Use this command to modify
1, dB0, dB1, dB2, dB3, dB4,
the neighboring relation with
eNodeB eRAN7.0 and later dB5, dB6, dB8, dB10, dB12,
an inter-frequency E-
dB14, dB16, dB18, dB20,
UTRAN cell.
dB22, dB24
Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第247页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these include
parameters:
parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values
Range-value of theseinclude
parameters: parameters
the
from NEs. for which the MAE
parameters
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these include
parameters:
parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values
Range-value of theseinclude
parameters: parameters
the
from NEs. for which the MAE
parameters
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第248页，共633页

 686970386.xls 文档密级

Optimizatio Parameter
MML Command Parameter NE
n Type Description

ADD
– CellId Cell ID RNC
UCELLINTERFREQHOCOV

Inter-freq CS
ADD
– InterFreqCSThd2DEcN0 Measure Start RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq CS
ADD
– InterFreqCSThd2FEcN0 Measure Stop RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq CS
ADD
– InterFreqCSThd2DRSCP Measure Start RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq CS
ADD
– InterFreqCSThd2FRSCP Measure Stop RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq R99 PS
ADD InterFreqR99PsThd2DEc
– Measure Start RNC
UCELLINTERFREQHOCOV N0
Ec/No THD
Inter-freq R99 PS
ADD InterFreqR99PsThd2FEc
– Measure Stop RNC
UCELLINTERFREQHOCOV N0
Ec/No THD
Inter-freq R99 PS
ADD InterFreqR99PsThd2DR
– Measure Start RNC
UCELLINTERFREQHOCOV SCP
RSCP THD
Inter-freq R99 PS
ADD InterFreqR99PsThd2FR
– Measure Stop RNC
UCELLINTERFREQHOCOV SCP
RSCP THD
Inter-freq H
ADD
– InterFreqHThd2DEcN0 Measure Start RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq H
ADD
– InterFreqHThd2FEcN0 Measure Stop RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq H
ADD
– InterFreqHThd2DRSCP Measure Start RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq H
ADD
– InterFreqHThd2FRSCP Measure Stop RNC
UCELLINTERFREQHOCOV
RSCP THD

MOD
– CellId Cell ID RNC
UCELLINTERFREQHOCOV

Inter-freq CS
MOD
– InterFreqCSThd2DEcN0 Measure Start RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq CS
MOD
– InterFreqCSThd2FEcN0 Measure Stop RNC
UCELLINTERFREQHOCOV
Ec/No THD

08/24/2023 华为保密信息,未经授权禁止扩散 第249页，共633页

 686970386.xls 文档密级

Inter-freq CS
MOD
– InterFreqCSThd2DRSCP Measure Start RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq CS
MOD
– InterFreqCSThd2FRSCP Measure Stop RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq R99 PS
MOD InterFreqR99PsThd2DEc
– Measure Start RNC
UCELLINTERFREQHOCOV N0
Ec/No THD
Inter-freq R99 PS
MOD InterFreqR99PsThd2FEc
– Measure Stop RNC
UCELLINTERFREQHOCOV N0
Ec/No THD
Inter-freq R99 PS
MOD InterFreqR99PsThd2DR
– Measure Start RNC
UCELLINTERFREQHOCOV SCP
RSCP THD
Inter-freq R99 PS
MOD InterFreqR99PsThd2FR
– Measure Stop RNC
UCELLINTERFREQHOCOV SCP
RSCP THD
Inter-freq H
MOD
– InterFreqHThd2DEcN0 Measure Start RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq H
MOD
– InterFreqHThd2FEcN0 Measure Stop RNC
UCELLINTERFREQHOCOV
Ec/No THD
Inter-freq H
MOD
– InterFreqHThd2DRSCP Measure Start RNC
UCELLINTERFREQHOCOV
RSCP THD
Inter-freq H
MOD
– InterFreqHThd2FRSCP Measure Stop RNC
UCELLINTERFREQHOCOV
RSCP THD

ADD
– CellId Cell ID RNC
UCELLINTERRATHOCOV

Inter-RAT CS
ADD
– InterRATCSThd2DEcN0 Measure Start RNC
UCELLINTERRATHOCOV
Ec/No THD
Inter-RAT CS
ADD
– InterRATCSThd2FEcN0 Measure Stop RNC
UCELLINTERRATHOCOV
Ec/No THD
Inter-RAT CS
ADD
– InterRATCSThd2DRSCP Measure Start RNC
UCELLINTERRATHOCOV
RSCP THD
Inter-RAT CS
ADD
– InterRATCSThd2FRSCP Measure Stop RNC
UCELLINTERRATHOCOV
RSCP THD

MOD
– CellId Cell ID RNC
UCELLINTERRATHOCOV

Inter-RAT CS
MOD
– InterRATCSThd2DEcN0 Measure Start RNC
UCELLINTERRATHOCOV
Ec/No THD

08/24/2023 华为保密信息,未经授权禁止扩散 第250页，共633页

 686970386.xls 文档密级

Inter-RAT CS
MOD
– InterRATCSThd2FEcN0 Measure Stop RNC
UCELLINTERRATHOCOV
Ec/No THD
Inter-RAT CS
MOD
– InterRATCSThd2DRSCP Measure Start RNC
UCELLINTERRATHOCOV
RSCP THD
Inter-RAT CS
MOD
– InterRATCSThd2FRSCP Measure Stop RNC
UCELLINTERRATHOCOV
RSCP THD

– MOD UINTERFREQNCELL RncId RNC ID RNC

– MOD UINTERFREQNCELL CellId Cell ID RNC

RNC ID of a
– MOD UINTERFREQNCELL NCellRncId RNC
neighboring cell

– MOD UINTERFREQNCELL NCellId Neighboring Cell ID RNC

Neighboring Cell
– MOD UINTERFREQNCELL CIOOffset RNC
Oriented CIO

ADD Ec/N0
– CellId Uniquethreshold for
ID of a cell RNC
UCELLMULTIRABHOCOV a UE to start an
inter-frequency or
inter-RAT
ADD Ec/N0 threshold for
– CSPSMRABThd2DEcN0 measurement when RNC
UCELLMULTIRABHOCOV a UE to stop an
CS and PS
inter-frequency
combined services or
inter-RAT
are processed.
ADD RSCP threshold for
– CSPSMRABThd2FEcN0 measurement when RNC
UCELLMULTIRABHOCOV a UE to start an
CS and PS
inter-frequency
combined services or
inter-RAT
are processed.
ADD CSPSMRABThd2DRSC RSCP threshold for
– measurement when RNC
UCELLMULTIRABHOCOV P a UE to stop an
CS and PS
inter-frequency
combined services or
inter-RAT
are processed.
ADD
– CSPSMRABThd2FRSCP measurement when RNC
UCELLMULTIRABHOCOV
CS and PS
combined services
MOD are processed. for
Ec/N0
– CellId Uniquethreshold
ID of a cell RNC
UCELLMULTIRABHOCOV a UE to start an
inter-frequency or
inter-RAT
MOD Ec/N0 threshold for
– CSPSMRABThd2DEcN0 measurement when RNC
UCELLMULTIRABHOCOV a UE to stop an
CS and PS
inter-frequency
combined services or
inter-RAT
are processed.
MOD RSCP threshold for
– CSPSMRABThd2FEcN0 measurement when RNC
UCELLMULTIRABHOCOV a UE to start an
CS and PS
inter-frequency
combined services or
inter-RAT
are processed.
MOD CSPSMRABThd2DRSC
– measurement when RNC
UCELLMULTIRABHOCOV P
CS and PS
combined services
are processed.

08/24/2023 华为保密信息,未经授权禁止扩散 第251页，共633页

 686970386.xls RSCP threshold for 文档密级
a UE to stop an
inter-frequency or
inter-RAT
MOD
– CSPSMRABThd2FRSCP measurement when RNC
UCELLMULTIRABHOCOV
CS and PS
combined services
are processed.

08/24/2023 华为保密信息,未经授权禁止扩散 第252页，共633页

 686970386.xls 文档密级

MAE Value Range

Version Operation Description
and Unit
Add cell-oriented coverage-based
inter-frequency handover
GUI Value Range: 0 to
measurement algorithm parameters.
RAN16.0 and later 65535
Add cell-oriented coverage-based Unit: None
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Add cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Add cell-oriented coverage-based Unit: dBm
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Add cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Add cell-oriented coverage-based Unit: dBm
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Add cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Add cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
GUI Value Range: 0 to
measurement algorithm parameters.
RAN16.0 and later 65535
Modify cell-oriented coverage-based Unit: None
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Modify cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第253页，共633页

 686970386.xls 文档密级
Modify cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Modify cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Modify cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Modify cell-oriented coverage-based
inter-frequency handover
measurement algorithm parameters. Value Range: -24 to 0
RAN16.0 and later
Unit: dB
Modify cell-oriented coverage-based
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Modify cell-oriented coverage-based Unit: dBm
inter-frequency handover
Value Range: -115 to -
measurement algorithm parameters.
RAN16.0 and later 25
Unit: dBm
Add cell-oriented coverage-based GUI Value Range: 0 to
RAN16.0 and later inter-RAT handover measurement 65535
algorithm parameters Unit: None
Add cell-oriented coverage-based
Value Range: -24 to 0
RAN16.0 and later inter-RAT handover measurement
Unit: dB
algorithm parameters
Add cell-oriented coverage-based
Value Range: -24 to 0
RAN16.0 and later inter-RAT handover measurement
Unit: dB
algorithm parameters
Add cell-oriented coverage-based Value Range: -115 to -
RAN16.0 and later inter-RAT handover measurement 25
algorithm parameters Unit: dBm
Add cell-oriented coverage-based Value Range: -115 to -
RAN16.0 and later inter-RAT handover measurement 25
algorithm parameters Unit: dBm
Modify cell-oriented coverage-based GUI Value Range: 0 to
RAN16.0 and later inter-RAT handover measurement 65535
algorithm parameters Unit: None
Modify cell-oriented coverage-based
Value Range: -24 to 0
RAN16.0 and later inter-RAT handover measurement
Unit: dB
algorithm parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第254页，共633页

 686970386.xls 文档密级

Modify cell-oriented coverage-based

Value Range: -24 to 0
RAN16.0 and later inter-RAT handover measurement
Unit: dB
algorithm parameters
Modify cell-oriented coverage-based Value Range: -115 to -
RAN16.0 and later inter-RAT handover measurement 25
algorithm parameters Unit: dBm
Modify cell-oriented coverage-based Value Range: -115 to -
RAN16.0 and later inter-RAT handover measurement 25
algorithm parameters Unit: dBm
GUI Value Range: 0 to
Modify an inter-frequency
RAN16.0 and later 4095
neighboring cell
Unit: None
GUI Value Range: 0 to
Modify an inter-frequency
RAN16.0 and later 65535
neighboring cell
Unit: None
GUI Value Range: 0 to
Modify an inter-frequency
RAN16.0 and later 4095
neighboring cell
Unit: None
GUI Value Range: 0 to
Modify an inter-frequency
RAN16.0 and later 65535
neighboring cell
Unit: None
Value Range: -20 to
Modify an inter-frequency
RAN16.0 and later 20
neighboring cell
Unit: None
Add cell-level coverage-based inter-
frequency or inter-RAT handover GUI Value Range: 0 to
RAN16.0 and later algorithm parameters dedicated to 65535
CS and PS combined services. Unit: None
Add cell-level coverage-based inter-
frequency or inter-RAT handover
Value Range: -24 to 0
RAN16.0 and later algorithm parameters dedicated to
Unit: dB
CS and PS combined services.
Add cell-level coverage-based inter-
frequency or inter-RAT handover
Value Range: -24 to 0
RAN16.0 and later algorithm parameters dedicated to
Unit: dB
CS and PS combined services.
Add cell-level coverage-based inter-
frequency or inter-RAT handover Value Range: -115 to -
RAN16.0 and later algorithm parameters dedicated to 25
CS and PS combined services. Unit: dBm
Add cell-level coverage-based inter-
frequency or inter-RAT handover Value Range: -115 to -
RAN16.0 and later algorithm parameters dedicated to 25
CS and PS combined services. Unit: dBm
Modify cell-level coverage-based
inter-frequency or inter-RAT GUI Value Range: 0 to
RAN16.0 and later handover algorithm parameters 65535
dedicated to CS and PS combined Unit: None
Modify
servicescell-level coverage-based
inter-frequency or inter-RAT
Value Range: -24 to 0
RAN16.0 and later handover algorithm parameters
Unit: dB
dedicated to CS and PS combined
Modify
servicescell-level coverage-based
inter-frequency or inter-RAT
Value Range: -24 to 0
RAN16.0 and later handover algorithm parameters
Unit: dB
dedicated to CS and PS combined
Modify
servicescell-level coverage-based
inter-frequency or inter-RAT Value Range: -115 to -
RAN16.0 and later handover algorithm parameters 25
dedicated to CS and PS combined Unit: dBm
services

08/24/2023 华为保密信息,未经授权禁止扩散 第255页，共633页

 686970386.xls 文档密级

Modify cell-level coverage-based

inter-frequency or inter-RAT Value Range: -115 to -
RAN16.0 and later handover algorithm parameters 25
dedicated to CS and PS combined Unit: dBm
services

08/24/2023 华为保密信息,未经授权禁止扩散 第256页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the parameters
parameter on theforMAE
which the MAE
client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter
parameterson the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第257页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the parameters
parameter on theforMAE
which the MAE
client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter
parameterson the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第258页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of
parameters
these parameters. CellId, IDTYPE,
such as
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of
parameters
these parameters. CellId, IDTYPE,
such as
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimizeparameters:
the valuesinclude
of
parameters
these parameters. CellId, IDTYPE,
such as
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the parameters
parameter on theforMAE
which the MAE
client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters.
Range-value parameters:The MAE
include
does
the not optimize
parameters forthe values
which of
the MAE
these parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include
the
parameter on the MAE client MAE
parameters for which the or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第259页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第260页，共633页

Optimization
MML Command Parameter Parameter Description NE
Type
ID of the
Name of thecell.cell. The cell ID
cannot
Cell names conflict cannot with other
GSM to GSM ADD
EXT2GCELLID cell IDs the
contain in the BSC. The
following GBSC
IPO GEXT2GCELL
cells in characters:,
invalid the BSC are; = " '
numbered
In addition,sequentially.
cell names
GSM to GSM ADD cannot contain two or
EXT2GCELLNAME GBSC
IPO GEXT2GCELL more
Location consecutive
area code %,
Mobile
two or country
more code.
consecutive
(LAC).
This An MS can
parameter move
spaces,
freely in or moreidentifies
a location thanarea
GSM to GSM ADD the country
threeno consecutive where a
+.
MCC with need of location GBSC
IPO GEXT2GCELL mobile subscriber is
Mobile
located,network
update. Appropriate
for example, code. the
This
divisionparameter
of
MCC for China is location identifies
areas
460.
GSM to GSM ADD the
can public
effectively land lighten
mobile
MNC GBSC
IPO GEXT2GCELL network
the signaling (PLMN) loadtoand
which a code
improve
Identity mobile
the call of a cell. A
subscriber
completion
cell is a wireless belongs.
rate.
GSM to GSM ADD
LAC The LAC is
coverage areaa 2-byteidentified GBSC
IPO GEXT2GCELL
hexadecimal
by a base station code.identity
It
ranges
code and from 0000 to
a global cell
GSM to GSM ADD FFFF(ffff). TheAcodes
identification. cell CI
CI 0000beand FFFE(fffe) are GBSC
IPO GEXT2GCELL can input in
reserved. Only
hexadecimal the LMT
format. The
supports hexadecimal
hexadecimal format is
GSM to GSM ADD BCCH
Network
codes.
H'**** or frequency
The color
h'****, forof that
code
hexadecimal an
BCCH GBSC
IPO GEXT2GCELL external
is provided
format is H'****
example, 2G by
H'1214cell. the
ororh'****,
telecom
for example, operator. H'1214 The
h'1214.
Base
A
NCCnetworkstation
is used color
consists
to ofor
code
identify
GSM to GSM ADD h'1214.
(BCC)
four of afrom
layers, cell,
namely, provided
NCC networks area to GBSC
IPO GEXT2GCELL by the
Umbrella, network planning
area. The NCC is Micro,
Macro, unique
department.
and Pico. Cell
nationwide. It priorities
is used for
differentiating
The BCC and the cells
influence the the
sorting NCC of
GSM to GSM ADD
BCC using the
neighboring
form the BSIC. same cells BCCHduring GBSC
IPO GEXT2GCELL
frequency. A
handovers BCC
well and as a
Whether
network theasBSC
color codethat
handover
controls algorithms
the external cell
GSM to GSM ADD (NCC) compose
including PBGT a base
and
COMSC and the local
station identity BSC code GBSC
IPO GEXT2GCELL inter-layer handovers.
belong
(BSIC). to the same
For example,
Handover
MSC. PBGT
threshold
handovers
during can only
the handovers
GSM to GSM ADD This
LAYER occurparameter
between among cells on
controls
cells on GBSC
IPO GEXT2GCELL the handovers among
the samelayers
different layer or and of of
cells
the on a priority
same same layer. level. AIf
different
small priorities.
priority value This
GSM to GSM ADD you assign
value is used different
to priority.
PRIOR indicates
layers andainter-layerhigh
priorities to a GBSC
IPO GEXT2GCELL suppress
Cells
1800-M with cell highandpriorities
a 900-M
ping-pong
are preferentially handovers.
cell, PBGT
Inter-layer handovers
GSM to GSM ADD Level
selected
from
value
the ashandover
1800-M
of
thethecell to
HOTHRES threshold
penalty
handover that of theperformed
is
target serving
cells. GBSC
IPO GEXT2GCELL the 900-M cell will not
cell
on the= Inter-layer
neighboring HO cells
occur.
threshold
of the cellThis-where causes
Inter-layer slow
a fast-
GSM to GSM ADD Period
handovers
HO
moving inMS
Hysteresis; which
even level
is located.when
SDPUNVAL penalty
the receive
Inter-layer is performed
signalcells
handover on
quality GBSC
IPO GEXT2GCELL The neighboring
the
is neighboring
favorable.
threshold
must be locatedof a at theof cells
the cell
neighboring
Macro, Micro, where cell a fast-
or =Pico
Inter-
GSM to GSM ADD Minimum
moving MS downlink
is located.
SDPUNTIME layer
receive HO
other Threshold
than
level of cells the + GBSC
IPO GEXT2GCELL The neighboring
Adjacent
Umbrella Cell
layer. Inter-layer
candidate
must be located neighboring at the
HO Hysteresis
cells. - 64.
Macro, Micro, or Pico
GSM to GSM ADD The
layerfollowing
other than conditions
the
MSRXMIN GBSC
IPO GEXT2GCELL must be
Umbrella layer. met:
Downlink receive level of
neighboring cells >=
Value of MSRXMIN +
Value of MINOFFSET.
 This
After parameter
the fast handover is used
for quick handover
is successful, the
decisions.
penalty on Quick the original
handover
serving cell can be
is performed
triggered
within the Quickonly when the
GSM to GSM ADD following
handover condition
punish
To avoid ping-pong is
time:
TIMEPUNISH Threshold
met: for allowing GBSC
IPO GEXT2GCELL the receive
handover,
MSs to hand level
the offrom
received
over the
Path
original
signal loss
of in the
serving
the serving
cell
original is
other
cell cells loss
- Path to the in cell
chain
decreased
serving
through cell byis
load-based Quick
decreased
GSM to GSM ADD neighboring
handover cell >value,
punish The
HOPUNISHVALUE by Quick handover
handovers. MSstrigger are GBSC
IPO GEXT2GCELL quick
to handover
prevent ping-pong
punish value
allowed to hand in Quick
over
threshold
handovers.
handover punish time
from
The other
quick cells
handover to the
GSM to GSM ADD after
cell fast
Indicates
through handover
that if a
load-based2G
HOOFFSET trigger
succeeds. threshold is the GBSC
IPO GEXT2GCELL neighboring
handovers if cell
any of the
sum of HOOFFSET in
supports
following
SET GCELLHOFASTload
conditions is in
handovers,
met:
the case of internalthe BSC
GSM to GSM ADD
LoadHoEnExt2G adds
1. the load
neighboring cellsisor
The cell load lower in GBSC
IPO GEXT2GCELL
information
than or equal
MOD GEXT2GCELL in of the
to local
this
cells
the casein the
threshold when
of signaling
external
GSM to GSM ADD procedures
neighboring related
HOCTRLSWITCH cells and istoset
LoadAccThres this neighboring cell. GBSC
IPO GEXT2GCELL to HOALGORITHM1
ADJHOOFFSET and
LOADHOAD
configured is
by the set to
A
YESservice
in thesupport
SET The
GSM to GSM ADD neighboring
attribute of acell.
cell, that is,
ISNC2SUPPORT GCELLHOBASIC
actual value of this GBSC
IPO GEXT2GCELL whether
command. an external
parameter
GSM cell is equal NC2 to the
A
2.
GUI
service
The cellsupports
value
support
load is64.
minus lower
attribute
than this of a cell, that
threshold in is,
GSM to GSM ADD
ISGPRSSUPPORT whether
other cases. an external GBSC
IPO GEXT2GCELL
GSM
If neithercell supports
A service of
GPRS
the
support
preceding
attribute ofconditions
a cell, thatisis,
GSM to GSM ADD met, MSsanare not
ISEDGESUPPORT whether external GBSC
IPO GEXT2GCELL allowed to hand over
GSM cell supports
Routing
from other
EDGE areacells code to thefor a
neighboring cell.
cell through load-based A
GSM to GSM ADD
RA routing
handovers. area is used for GBSC
IPO GEXT2GCELL
the SGSN to manage
the location of MSs.
Name of the operator.
GSM to GSM ADD
OPNAME This parameter uniquely GBSC
IPO GEXT2GCELL
identifies an operator.

GSM to GSM ADD

IDTYPE Index type GBSC
IPO G2GNCELL
A cell Index must be
GSM to GSM ADD unique in one BSC. It is
SRC2GNCELLID GBSC
IPO G2GNCELL used to uniquely identify
a cell.
Uniform number of a cell
GSM to GSM ADD index within a BSC,
NBR2GNCELLID GBSC
IPO G2GNCELL which uniquely identifies
a cell.
GSM to GSM ADD Mobile country code
SRCMCC GBSC
IPO G2GNCELL (MCC) of the source cell

GSM to GSM ADD Mobile network code

SRCMNC GBSC
IPO G2GNCELL (MNC) of the source cell

GSM to GSM ADD Local area code (LAC)

SRCLAC GBSC
IPO G2GNCELL of the source cell

GSM to GSM ADD

SRCCI Source cell ID GBSC
IPO G2GNCELL
 cell is a handover
neighboring cell, an
IBCA
Whenneighboring cell, or
a handover and IBCA
EDGEHOHYSTEN is set
neighboring
to YES: cell of the
serving cell. If the
Mobile
parameter Country is setlow Code
to
GSM to GSM ADD For an MS with
NBRMCC (MCC)
HANDOVERNCELL(Hanof a neighboring GBSC
IPO G2GNCELL receive level, bad quality
cell
dover Neighboring Cell),
handover hysteresis =
the neighboring
MobileofNetwork
Value EDGEHOHYST cell
Code is
GSM to GSM ADD the handover
NBRMNC -(MNC)
Value of
of athis neighboring GBSC
IPO G2GNCELL neighboring cellanbut not
cell
parameter.For MS
the IBCA neighboring
with high receive level,
GSM to GSM ADD cell
bad
Local of the serving
quality
Area handover
Code cell. If
(LAC)
NBRLAC the parameter is GBSC
IPO G2GNCELL hysteresis
of a neighboring = Value cellofto
set
IBCANCELL(IBCA
INTERCELLHYST -
Neighboring
Value of this Cell), parameter. the
GSM to GSM ADD Cell ID of a neighboring
neighboring cell is the
NBRCI GBSC
IPO G2GNCELL cell
IBCA
Whenneighboring cell
but not the handover
EDGEHOHYSTEN is set
neighboring
to NO: cell of the
GSM to GSM ADD
NCELLTYPE serving cell. If the GBSC
IPO G2GNCELL
parameter
Bad quality is set to
Whether
HANDOVERANDIBCAN thehandover
currently
hysteresis
used handover = Value of
algorithm
GSM to GSM ADD SRCHOCTRLSWITC CELL(Handover
Hysteresis
INTERCELLHYST value and
during
-
in the Neighboring
Threshold
IBCA source for cell
triggeringisCell),
HO GBSC
IPO G2GNCELL H the
Minimum
Value handovers
of receive
this between
parameter. level
Algorithm
PBGT
the neighboring I
handovers. or HO cell PBGTis
cells,
offset.
Algorithm This
TheIIvalue following is used
handovers
the
to handover
suppress
condition must toping-pong
a be met
GSM to GSM ADD In Huawei I handover
neighboring cell
INTERCELLHYST neighboring
handovers
for a neighboring
algorithm, cell can
abetween
BQ andcellbe to GBSC
IPO G2GNCELL triggered
IBCA when
neighboring the cell of
cells.
be added
handover The to actual
into a thevalue of
following
the
this serving
candidateparameter condition
cellcell. isIBCA
queue: is
equal
neighboring
met: cell is
GSM to GSM ADD neighboring
to the GUI ifvalue
Neighboring
performed cells
cell uplink
both are
minus
of the
MINOFFSET some
64. neighboring cells GBSC
IPO G2GNCELL level
following >= conditions are
Path
Whether
of lossthe
a serving
(HOCDCMINUPPWR in cell
the
cellserving
is a its+
with
met:
Difference
cell - Path between
lossand in the the
chain
IBCA
MINOFFSET) neighboring
algorithm cell.
enabled.
GSM to GSM ADD downlink
neighboring
The parameter receive cell is > level
Actual
used ofin
PBGTMARGIN There
Neighboring
Downlink is co-channel
receive celland level or of GBSC
IPO G2GNCELL the
value
the serving
quick of this cell
handoverparameter that
adjacent-channel
downlink
the level >=
of
If aneighboring
this
algorithm.neighboring
parameter Quick
cell
cell
is set afterto
interference
(HOCDCMINDWPWR
filtering - Downlink between the
+
during
a value
handover handovers
less aims than to due
64, to
GSM to GSM ADD IBCA
MINOFFSET).
receive neighboring cells
BQMARGIN directed
callsthe
increase
and canlevelretry.
be handed
the
serving
ofInthe
handover the
cell. GBSC
IPO G2GNCELL serving
case
over of
back cell
Huawei to after
a power
success
Handover
control rate of an MS>
neighboring
compensation
handover
neighboring
moving algorithm
cell whose II,
cells
BQ areatcandidate
handover a high speed
hysteresis.
GSM to GSM ADD Hysteresis
this
path
and parameter
loss
to ensure is value
greateris during
the used than
call to
ISCHAINNCELL target cells of the GBSC
IPO G2GNCELL the
that handovers
calculate
continuityin the theserving between
hysteresis
low cell.
serving
BqNCellAbsThresSwcelland during call
a is
cells
of
The
drop on
handovers
actual
rate. differentvalue
Quick duelayersoftothis
handover.
set
or oftodifferent
directed
parameter
handover
OFF. retry priorities.
using
is equal
applies totothe
thethe
GSM to GSM ADD This
following
GUI
scenario value
value is
formula:
minusused 64.to
IPO G2GNCELL
INTELEVHOHYST In Huaweiwhere
suppress
Hysteresis IIofhandover
inter-layer
an MS
handovers
GBSC
moves
algorithm, fast along
ahandovers.
BQretry an
ping-pong
due
urban to backbone
directed road, =a
handover
The
Value actual
of tovalue
a of this
GSM to GSM ADD selected
neighboring route, orisa high-
DRHOLEVRANGE parameter
INTERCELLHYST
This
speed parameter
railroad. iscell
equal -to the
indicates
The GBSC
IPO G2GNCELL performed:
GUI value minus 64.
Value
the
target of this
geographical
cell must parameter.
According
Handovers
relationship toduethebe
between toP/N
a
the
chain
rule, if
if the servingneighboring
a neighbor and cell.
cell
thethe
GSM to GSM ADD directed
neighboring retrycell to aand
CHAINNCELLTYPE neibouring
meets
neighboring the conditions
cells
cell are
can atfor
be GBSC
IPO G2GNCELL serving cell. In the BSC,
selecting
the same
iftriggered
directionwhen the neighbor
frequency
A is the
According
cell to theselected,
P/N in
thenfor
band,
following
rule, the
if a
edge
the reverse
neighbor
handover
downlink
condition is
cell
GSM to GSM ADD EDGEADJSTATTIM P met: of N
receive
direction measurement
level
(Downlinkis B. of the
receive
meets the GBSC
IPO G2GNCELL E reports,
neighboring
level of thetheconditions
edge
cell
neighboringafter
for
selecting
handover the
to the -neighbor
filtering
cell
cell after
for - filtering
edgeDownlink handover
The
neighbor triggering cell isofthe inter- in
GSM to GSM ADD receive
Downlink
P of N levelreceive
measurement of level of
layer
EDGEADJLASTTIME triggered. handovers must GBSC
IPO G2GNCELL serving
the
reports,serving cell
the after
cell
edge power
after
meet
This the
parameter P/N criteria.
specifies An
control
power
handover compensation
control to the >
inter-layer
the number handover
N.hysteresis. is
BQ handover
compensation)
neighbor cell >
is P of N (Value
triggered when
GSM to GSM ADD of INTERCELLHYST
LEVSTAT triggered.
measurement reports - GBSC
IPO G2GNCELL ifThis
64) the- parameter
servingofcell
(Value this is at
specifies
meet the condition for
the low
parameter frequency
the numberhandovers. - 64).
P. band
inter-layer
and neibouring cell is at
This parameter
the high frequency band,
corresponds to the N in
downlink receive level of
the P/N criteria.
the neighboring cell after
filtering >=(HOTHRES +
 When both Enhanced
The
Outgoingtriggering of inter-
Cell Handover
layer
Offset and EDGEmust
handovers HO
meet
Allowed theare P/Nset criteria.
to YES An
inter-layer
for atriggering
cell, the BSChandover is
takes
The
triggered when ofPPBGTof N
GSM to GSM ADD the value
handovers of this
must meet
LEVLAST measurement
parameter intoreports
account GBSC
IPO G2GNCELL the P/N criteria. A PBGT
meet
when the
decidingcondition for
to trigger
handover
inter-layer is triggered
handovers.
The
an
when triggering
edge P of N handover. of PBGTThat
GSM to GSM ADD This
handovers
is, parameter
handovers must to meet
the
PBGTSTAT measurement
corresponds toreports
the P in GBSC
IPO G2GNCELL the
edge P/Nof criteria.
acondition
neighboring A PBGT
meet
the P/Nthe criteria. for
handover
cell
PBGT canhandovers. is triggered
be triggered This
when
when
parameter P of N
either of the
corresponds
GSM to GSM ADD
PBGTLAST measurement
According
following
to the N incondition to
thethe reports
P/N P/Nis GBSC
IPO G2GNCELL
meet
rule,
met:
criteria. the
if the condition
conditions forfor
PBGT
fast handoverhandovers. are met Thisin
GSM to GSM ADD parameter
P of N receive
Uplink corresponds
measurement level
IPO G2GNCELL
HOSTATICTIME According
to the
reports, P in
the to
the theP/N
handover P/Nof is GBSC
the
rule, serving cell
if the conditions for after
criteria.
triggered.
power control
fast
This parameterare
handover met in
GSM to GSM ADD compensation
P of N measurement <specifies
Value of
HOLASTTIME the number N. +
ULEDGETHRES GBSC
IPO G2GNCELL reports, the handover is
Value
Whether
triggered. of this
to apply parameter penalty-
64
on a neighboring
This parameter cell
specifies
GSM to GSM ADD Level threshold used to
EDOUTHOOFFSET when
the number
stop
the PBGT
the timer P. for GBSC
IPO G2GNCELL Downlink receive
handover, concentric levelcellof
performing
the servingor
handover, penalties
cell after in a
hierarchical
neighboring
power control
handover in cell
handover during
GSM to GSM ADD PBGT,
compensation concentric < Value cell of
NCELLPUNEN algorithm I is triggered, GBSC
IPO G2GNCELL handover,
DLEDGETHRES or hierarchical
+
or when the better cell
handovers
Value
handover ofofthisin in parameter
the case of-
Length
Huawei thehandover
handover timer for
GSM to GSM ADD 64
algorithm
performing II penalties
is triggered. in a
NCELLPUNSTPTH algorithm
This prevents I or during
a call from GBSC
IPO G2GNCELL neighboring cell during
better
In the case
experiencing cell handovers
ofping-pong
Huawei in
PBGT,
the case concentric
of Huawei cell
handover
handovers.
handover,
Level algorithm
or hierarchical
for penalties II,
inII.a
GSM to GSM ADD handover
handovers algorithm
to a better
NCELLPUNTM handovers
neighboring
If the BCCH cell in the
cell
receive case
during of GBSC
IPO G2GNCELL neighboring can be
Huawei
PBGT,
level of thehandover
concentricneighboring cell
triggered
algorithm
handover, when
I ororthan both of
during
hierarchical
cell is lower
the following this
conditions
GSM to GSM ADD better
handovers
threshold, cell handovers
in the
the penalties caseinof
NCELLPUNLEV are
the met:
case of Huawei GBSC
IPO G2GNCELL Huawei
will be stopped.handover
handover
algorithm
ID of the cell. Ialgorithm
or during
The cell II. ID
Name
Enhanced
better cell
cannot ofconflict
the cell.
Outgoing
handovers with other Cell
in
GSM to UMTS ADD Cell
Handovernames cannot
Offset
EXT3GCELLID the case
cell IDs inofthe BSC. Theto
Huawei is set GBSC
IPO GEXT3GCELL contain
YES.
handover thealgorithm
following
cells in the BSC are II.
invalid characters:
numbered sequentially.
,Receive
; = " ' level of the
GSM to UMTS ADD
EXT3GNCELLNAME Location
In addition,
serving cell
area cell
aftercodenames
power GBSC
IPO GEXT3GCELL
cannot
Mobile
control An
(LAC). contain
country
compensation
MS can twomove
code. or <
more
This
freely consecutive
Valueparameter
of aHOTHRES
in location %,
identifies
-
area
GSM to UMTS ADD two
the
(Value
with or
no more
countryofneed consecutive
where
LEVHOHYSTof a
location
MCC spaces, or thismore than GBSC
IPO GEXT3GCELL mobile
+ Valuesubscriber
update. of
Appropriate is
Mobile
three
located, network
consecutive
forlocation code.+.
parameter
division of - example,
64). The areasthe
This
MCC parameter
for China identifies
is 460.
actual
can value
effectively of lighten
this
GSM to UMTS ADD the public land mobile
MNC parameter
the signaling is equal
loadtoand to the GBSC
IPO GEXT3GCELL network (PLMN)
GUI
improvevalue the minus
call 64.
which a code
Identity mobile of a cell. A
completion
subscriber rate.
belongs.
GSM to UMTS ADD cell is a wireless
LAC coverage area identified GBSC
IPO GEXT3GCELL The LAC is a 2-byte
by
hexadecimal code.identity
a base station It
code
ranges and from a global
0000 to cell
GSM to UMTS ADD identification.
FFFF(ffff). TheAcodes cell CI
CI GBSC
IPO GEXT3GCELL can
0000 be input
andofFFFE(fffe) in are
RNC ID
hexadecimal a 3G format. externalThe
reserved.
cell. The Only
value thethis
of LMT
hexadecimal
supports hexadecimal format is
GSM to UMTS ADD parameter
H'**** or mustfor
h'****, be
RNCID codes. Thewith hexadecimal GBSC
IPO GEXT3GCELL consistent
example, H'1214 the or data
format
configurationis H'**** at orthe h'****,
h'1214.
for example, H'1214 or
RNC.
h'1214.
 UTRANCELLTYPE is
set to TDD(TDD), this
parameter specifies the
cell parameter.
Threshold for
determining
This parameter the islayer
used of
GSM to UMTS ADD the 3G
Downlink neighboring
frequency
to differentiate different cell.
of
DF If the
Minimum Ec/No level of the 3G
threshold GBSC
IPO GEXT3GCELL the
MSs external
or cells. 3G cell.
Scrambling
neighboring
for
codes triggering
are used cell is less
a handover
after
than
to a 3G
spread thisspectrum.
threshold,cell.
candidate the If
GSM to UMTS ADD neighboring
the measured cell is
level set
of ato
SCRAMBLE Therefore, the GBSC
IPO GEXT3GCELL the
3G lowest
neighboring layer (layer
cell is
bandwidth of a signal is
4).
lower
not
Whether than
changed. tothis Instead,
activate
GSM to UMTS ADD threshold,
signals from
transmit thedifferent
diversity 3G on the
DIVERSITY The decibel
neighboring value
cell will GBSC
IPO GEXT3GCELL sources
common are
channel of bea
This
removed parameter
corresponding
differentiated.
3G cell from specifies
to
all the
3G
the type ofcells.
parameter
candidate
Scrambling aprevents
3G cell.
values areAas
GSM to UMTS ADD cell type(For
follows:
multiple can details,
be
transmitters see
UTRANCELLTYPE GBSC
IPO GEXT3GCELL Frequency
the
from3GPP
The usingTS
decibel Division
the 45.008
value
same
Duplex
protocol.):
corresponding
code word (FDD) or
to Time
for spread the
Division
parameter Duplex
spectrum. This are as
values (TDD).
GSM to UMTS ADD Minimum level threshold
ECNOTHRES 0: < -24 (For
follows:
parameter dB is details,
used to see GBSC
IPO GEXT3GCELL for triggering a handover
the 3GPP TSdifferent
differentiate 45.008
to
1: a
-243G
protocol.): dBcandidate
<= CPICH cell. If
MSs on the uplink and
GSM to UMTS ADD the
Ec/Io measured
< -23.5 level of a
dB
MINECNOTHRES differentiate different GBSC
IPO GEXT3GCELL 3G
0: <neighboring
-24 dB downlink. cell is
cells on the
lower
2: -23.5 than
dBthis <= CPICH
threshold,
Ec/Io
1: -24<dB -23 the
<= dB 3G
CPICH
GSM to UMTS ADD Minimum Ec/No of the
FDDECQUALTHRSH Ec/Io < -23.5 dB will be
neighboring cell GBSC
IPO GEXT3GCELL 3G
removed
... FDD cell candidate
from all 3G
candidate
2: -23.5 dBcells.
Threshold for <=allowing
CPICH
GSM to UMTS ADD FDDRSCPQUALTHR This
47: -1parameter
MSs
Ec/Io
Minimum to
<dBhand
-23 <=dB
RSCP overisofused
CPICH from
the
to
The
other
Ec/Iodetermine
decibel
cells
< -0.5 todB the
the layer
value cell of GBSC
IPO GEXT3GCELL SH 3G FDD cell candidate
a
...3G neighboring
corresponding
through load-based to thecell. If
the
48: measured
parameter
-0.5 dBvalues
handovers. MSs
<= RSCP are as
are
CPICH
GSM to UMTS ADD value
follows:
allowed
Ec/Io
47: -1 <of0
dB adB
(For
to 3G
<=hand details,
CPICH over see
RSCPTHRES GBSC
IPO GEXT3GCELL neighboring
the
from
Ec/Io 3GPP
other
< -0.5 TS cell
cells
dB is the
45.008
to lower
than
cell this
protocol.):
49: 0through
dB <= threshold,
load-based
CPICH the
3G
Ec/Io.
48: neighboring
handovers
-0.5 dB if any cell
<=ifCPICHof is at
the
GSM to UMTS ADD Indicates
the bottom thatlayer, a<that
3G
IPO GEXT3GCELL
MINRSCPTHRES 0:
Ec/IoCPICH
following <
neighboring 0 RSCP
conditions
dB cell isis,
-115 GBSC
layer
dBm 4.
met:
supports load
49: 0 dB <= the
handovers, CPICH
GSM to UMTS ADD 1:
1. -115cell
The
Ec/Io. dBm load<=BSCCPICH
is lower
LoadHoEnExt3G adds
RSCP the load
<equal
-114 to dBm GBSC
IPO GEXT3GCELL than or this
information of the local
threshold
cells in the when
2: -114
HOCTRLSWITCH dBmsignaling
<= CPICH is set
GSM to UMTS ADD procedures
RSCP < -113 related
dBm toand
LoadAccThres to HOALGORITHM1
this neighboring cell. GBSC
IPO GEXT3GCELL
LOADHOAD is set to
... in the SET
YES
Name
GCELLHOBASICof the operator.
GSM to UMTS ADD
OPNAME This
61: -55 dBm <= uniquely
command. parameter CPICH GBSC
IPO GEXT3GCELL
identifies
RSCP an operator.
Routing< area -54 dBm
code for a
2. The cell load
neighboring cell.isAlower
GSM to UMTS ADD 62:
than -54
thisdBm <=used
threshold CPICH infor
RA routing area is GBSC
IPO GEXT3GCELL RSCP < -53
other
the cases.
SGSN todBmmanage
the location of MSs.
GSM to UMTS ADD 63: -53 dBm
If neither of the <= CPICH
IDTYPE Type
RSCP.
preceding of an index.
conditions is GBSC
IPO G3GNCELL A source cell index must
met,
be uniqueMSs are in one not BSC. It
allowed
is used to to uniquely
hand over
GSM to UMTS ADD from other cells to the
SRC3GNCELLID identify anumber
Uniform source cell.
of a GBSC
IPO G3GNCELL cell through load-based
The value of
neighboring cell index this
handovers.
parameter
within a BSC, ranges which from 0
GSM to UMTS ADD to 2047. identifies a cell.
uniquely
NBR3GNCELLID GBSC
IPO G3GNCELL
The value range of the
index of a 3G external
cell is 5048 to 15287.
 The decibel value
minus
correspondingthe valuetoofthe this
parameter
parameter values are the
is used as as
level
follows: in the
(ForKdetails,
criteria see for
handover
the 3GPP decisions. TS 45.008The
level
protocol.): for
is used
GSM to UMTS ADD handovers from 2G
RSCPOFF networks GBSC
IPO G3GNCELL 0: CPICH to 3G < -115
RSCP
networks.
Period
dBm during which
handovers to a better 3G
GSM to UMTS ADD The
cell
1: -115 decibel
are measured
dBm value
<= CPICH if
ECNOOFF GBSC
IPO G3GNCELL corresponding
neighboring
Period <during
RSCP -1143G tocells
which
dBm thethe are
parameter
FDD
conditions cells. forvalues
According are to
handovers as
follows:
the
to a P/N
better (For
rule,
2: -114 dBm <= CPICH 3G details,
handovers
cell are see
GSM to UMTS ADD the
HOSTAT3G to
met
RSCP a3GPP
ifbetter TS
3G 45.008
neighboring
< -113 cell can
dBm 3G GBSC
IPO G3GNCELL protocol.):
be triggered
cells are FDDwhen cells.the
conditions
According to
... forthe
handovers
P/N
GSM to UMTS ADD 0: a
to
rule,CPICH
better
handovers Ec/Io
3G cell <to-24a dB
are
HODURT3G met for P out of N MRs GBSC
IPO G3GNCELL better
Common 3G
61: -55 dBm <= CPICHcell can
priority of be a .
1:
This -24
triggered
neighboring dB
parameter
RSCP < -54 dBm <=
when CPICH
3G specifies
the
cell.
Ec/Io
N in the
conditions
Value <0-23.5
P/N dB
forrule.
indicates handovers
the
GSM to UMTS ADD to a-54
better 3G<=cell are7
NCELLPRI lowest
62: priority,
dBm value
CPICH GBSC
IPO G3GNCELL 2:
met -23.5
for<PdB <=
out ofCPICH
N MRs.
indicates
RSCP the
-53 highest
dBm
ID
Ec/Ioof parameter
the
<of-23cell.value
The cell
255 ID
This
priority,
Name
cannot
andthedB
conflict cell. specifies
with
is
other
GSM to LTE ADD P
Cell
63: in
invalid.the
names P/N rule.
cannot
EXTLTECELLID cell -53
... IDs dBm
in the <=BSC. CPICH The GBSC
IPO GEXTLTECELL contain
RSCP. the following
cells in the BSC are
invalid
numbered characters:
sequentially.
47:
, ; =-1 " ' dB <= CPICH
GSM to LTE ADD
EXTLTECELLNAME Ec/Io
In addition,< -0.5 celldB names GBSC
IPO GEXTLTECELL
cannot country
Mobile contain code. two or
48:
This-0.5
more dB <= CPICH
consecutive
parameter %,
identifies
GSM to LTE ADD Ec/Io
the or<more
two country 0 dBwhere
consecutive a
MCC spaces,subscriber
or more than GBSC
IPO GEXTLTECELL mobile is
Mobile
49:
three 0 dB
located, network
<= example,
consecutive
for CPICH code.+. the
This
Ec/Io.
Cell parameter
identity
MCC for China is (CI) identifies
used
460.to
GSM to LTE ADD the publicidentify
uniquely land mobile an LTE
MNC GBSC
IPO GEXTLTECELL network
cell in the PLMN.where
(PLMN) For a
mobile base
macro subscriber
stations, is
homed.
The
Eutran type of eNodeB
CellId consists of
GSM to LTE ADD
ENODEBTYPE which
a 20-bit the LTE cell and
eNodeBID GBSC
IPO GEXTLTECELL
belongs
an to.
8-bit CellID
(EutranCellId =
GSM to LTE ADD Track
eNodeBID area xcode 256 (TAC).
+
CI MSs can freely move in GBSC
IPO GEXTLTECELL CellID). For micro base
the local track
stations, EutranCellId is area
without
a 28-bit track eNodeBID.area Only
GSM to LTE ADD update.
the LMT supportsReasonable
TAC GBSC
IPO GEXTLTECELL division
hexadecimal of track codes,areas
E-UTRAN
can effectively Absolute
mitigate
such
Radio as H'1214. For
Frequency
the
detailssignaling
about load
the and
GSM to LTE ADD Channel
increase Number
the call
FREQ parameter description, GBSC
IPO GEXTLTECELL (EARFCN)
completion of the carrier
rate.
see 3GPP that
frequency TS 25.413.
an
external LTE cell uses.
GSM to LTE ADD Physical cell identifier of
PCID GBSC
IPO GEXTLTECELL an external LTE cell.
Type of an external LTE
cell. A cell type can be
GSM to LTE ADD
EUTRANTYPE Frequency Division GBSC
IPO GEXTLTECELL
Duplex (FDD) or Time
Division Duplex (TDD).
Name of the operator.
GSM to LTE ADD
OPNAME This parameter uniquely GBSC
IPO GEXTLTECELL
identifies an operator.

GSM to LTE ADD

IDTYPE Type of an index. GBSC
IPO GLTENCELL
 Whether to support cell
reselection from GSM to
Index
LTE. Ifofthis theparameter
source GSM is
cell, which
set to SUPPORT, is a it
neighboring
indicates thatcell theof an
GSM to LTE ADD
SRCLTENCELLID LTE cell.
Index
frequency of the The index
oftarget
the LTE
target must GBSC
IPO GLTENCELL
be unique
cell,
LTE cell is in
which aa BSC. It is
is neighboring
a
used
frequencyto uniquely
neighboring ofcell
the of identify
a
source
GSM to LTE ADD a source
GSM cell. cell.
This
cell and cell index
NBRLTENCELLID GBSC
IPO GLTENCELL must be unique
reselection fromin GSM a to
BSC.isItsupported.
LTE
Whether istoused support to If the this
uniquely
parameter
blind handoveridentify
is setfrom an LTE
to the
GSM to LTE ADD Whether
cell. a quick
SPTRESEL UNSUPPORT,
source GSM cellit to the GBSC
IPO GLTENCELL reselection from the
indicates
target LTEthat cell.the The
source
frequency
blind GSM
handover of cell
the to the
target
from
Generating
target LTE mode
cell is of thethe
GSM to LTE ADD LTE
source
GSM cell
BA1GSMis list.
a neighboring
cell
The to GSMthe
SPTBLINDHO allowed.
frequency Quickof theindicates
source GBSC
IPO GLTENCELL target
BA1 LTE
list records cell BCCH
reselection
GSM
that thecell MS but from
in the
the the
LTE
GSM
frequencies
source GSM ofcell to the
cell is
neighboringa barred
handed GSM over to
cells
GSM to LTE ADD target
neighboring
the targetLTE cell
cell
LTEmeasure indicates
of
cell the
SPTRAPIDSEL that MSs can GBSC
IPO GLTENCELL that
Common
GSM
withoutthecell.CHANNEL
priority
That
measuring ofcell
is,sent a in
the
idle mode
RELEASE
neighboring and
message
LTE is cell. in
reselection
target
system LTE from the(SI)
cell.
information
sent
Value
source to0GSM
the MS
indicates cellcarries
tothe the
GSM to LTE ADD 2,
the 2bis, and 2ter.
information If this
about
NCELLPRI lowest
target priority,
LTE cell value
is not 7 GBSC
IPO GLTENCELL parameter
cell reselection, is set to the
and
indicates
supported. the highest
AUTO,
MS
priority,
Index ofthe
performsand
a cell,GSM cell
value BA1255list
uniquely is
GSM to GSM SET is automatically
reselection
invalid.
identifying immediately
IDTYPE Index
generated type a
after channel
cell in a
withrelease. GBSC
IPO GCELL2GBA1 BSC.
frequencies
GSM cells are foruniquely
neighboring
but not necessarily cells whose
GSM to GSM SET HSRPNUsrNCTag is set
CELLID consecutively numbered GBSC
IPO GCELL2GBA1 to NO in the ADD
within a BSC. For
G2GNCELL
example, you command
can of the
Generating
sorted in mode
ascending
GSM to GSM SET number
GSM BA2 a GSM
list. The cellGSM 0
CELL2GBA1TAG order.
and If this
number parameter
another GBSC
IPO GCELL2GBA1 BA2
is
GSM setlist
to records
cell MANU,
3. of
BCCH
frequencies
frequencies in
Index of a cell, uniquely the GSM
SET neighboring
BA1 list can GSM
be cells
manually
GSM to GSM identifying a cell in a
GCELLHO2GBA IDTYPE Index
that MSs
imported. typecan If this measure in GBSC
IPO BSC.
2 dedicated
parameter mode
is set and
to is
GSM cells are uniquely
SET sent in system
AUTO2GNCELLRANKP
but not necessarily
GSM to GSM information
RI, the GSM(SI) BA1 5,list
5bis, is
GCELLHO2GBA CELLID consecutively numbered GBSC
IPO and 5ter.
automatically If this generated
2 within a BSC. For
parameter
with frequencies
example, youis setcanto for
SET AUTO,
neighboring
number the
a GSM GSM
cellscell BA2
whose 0 list
GSM to GSM
GCELLHO2GBA CELL2GBA2TAG is automatically
HSRPNUsrNCTag
and number another is set GBSC
IPO
2 generated
to
GSM NOcell in the 3.withADD
frequencies
Index
G2GNCELL of a cell, for uniquely
command
SET Input modeaof
neighboring theinwhose
cells BA
GSM to UMTS identifying
sorted in cell
descending a
GCELLIDLEFD IDTYPE Index
lists. type
HSRPNUsrNCTag is set GBSC
IPO BSC.
order ofInpriorities
DBA1 AUTO:
to NO in the this ADDmode, the
GSM
specified cells are
byin the BA1uniquely
SET system
G2GNCELL
but fills
not necessarily in command
GSM to UMTS GNCELLRANKPRI
and BA2 lists according
GCELLIDLEFD CELLID sorted in G2GNCELL
consecutively
the ADD ascending numbered GBSC
IPO to neighboring
order. relations
DBA1 within
command. a BSC. For
of cells.
If this parameter
example, you canis set to
SET MANU:
MANU, In
number this mode,
frequencies
a GSM cell 0in
GSM to UMTS
GCELLIDLEFD FDDBA1TAG you
the GSM
and can
number maintain
BA2another list thecanBA be GBSC
IPO
DBA1 tables
manually
GSM cell 3.by yourself.
imported. If the
neighboring
Index of a cell, relations
uniquely of
SET cells are changed, for
GSM to UMTS identifying a cell in a
GCELLHOFDDB IDTYPE Index
example, typeafter a GBSC
IPO BSC.
A2 neighboring celluniquely
is added
GSM cells are
SET or
butdeleted,
not necessarily you must
GSM to UMTS maintain the BA1 and
GCELLHOFDDB CELLID consecutively numbered GBSC
IPO BA2 lists by yourself.
A2 within a BSC. For
example, you can
number a GSM cell 0
and number another
GSM cell 3.
 This parameter indicate
whether to generate the
SET FDD BA2 table
GSM to UMTS
GCELLHOFDDB FDDBA2TAG automatically according GBSC
IPO
A2 to neighbor cell relations
or to input
Index the FDD
of a cell, BA2
uniquely
table manually
identifying
GSM IPO ACT GCELL IDTYPE Index type a cell in a GBSC
BSC.
GSM cells are uniquely
but not necessarily
GSM IPO ACT GCELL CELLID consecutively numbered GBSC
within a BSC. For
example, you can
RMV number a GSM cell 0
GSM IPO IDTYPE Index Type another
and number GBSC
G2GNCELL
GSM cell 3.
RMV Mobile country code
GSM IPO SRCMCC GBSC
G2GNCELL (MCC) of the source cell

RMV Mobile network code

GSM IPO SRCMNC GBSC
G2GNCELL (MNC) of the source cell

RMV Local area code (LAC)

GSM IPO SRCLAC GBSC
G2GNCELL of the source cell

RMV
GSM IPO SRCCI Source cell ID GBSC
G2GNCELL

Mobile Country Code

RMV
GSM IPO NBRMCC (MCC) of a neighboring GBSC
G2GNCELL
cell
Mobile Network Code
RMV
GSM IPO NBRMNC (MNC) of a neighboring GBSC
G2GNCELL
cell

RMV Local Area Code (LAC)

GSM IPO NBRLAC GBSC
G2GNCELL of a neighboring cell

RMV Cell ID of a neighboring

GSM IPO NBRCI GBSC
G2GNCELL cell

RMV
GSM IPO IDTYPE Index Type GBSC
G3GNCELL
A source cell index must
RMV be unique in one BSC. It
GSM IPO SRC3GNCELLID GBSC
G3GNCELL is used to uniquely
identify a source cell.
Uniform number of a
RMV neighboring cell index
GSM IPO NBR3GNCELLID GBSC
G3GNCELL within a BSC, which
uniquely identifies a cell.
RMV
GSM IPO IDTYPE Index Type GBSC
GLTENCELL Index of the source GSM
cell, which is a
neighboring cell of an
RMV
GSM IPO SRCLTENCELLID LTE cell. The index must GBSC
GLTENCELL
be unique in a BSC. It is
used to uniquely identify
a source cell.
 Index of the target LTE
cell, which is a
neighboring cell of a
RMV GSM cell. This index
GSM IPO NBRLTENCELLID GBSC
GLTENCELL must be unique in a
BSC. It is used to
uniquely identify an LTE
cell.
 Operation MAE Value Range and
Version
Description Unit

Use this command GUI Value Range: 2048 to

GBSS 16.0 and later to add a 2G external 12287
cell. Unit: None
Use this command GUI Value Range: 1 to 64
GBSS 16.0 and later to add a 2G external characters
cell. Unit: None
Use this command
GUI Value Range: 3 digits
GBSS 16.0 and later to add a 2G external
Unit: None
cell.
Use this command GUI Value Range: 2 to 3
GBSS 16.0 and later to add a 2G external digits
cell. Unit: None
Use this command GUI Value Range: 1 to
GBSS 16.0 and later to add a 2G external 65533, 65535
cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 2G external 65535
cell. Unit: None
Use this command
Value Range: 0 to 1023
GBSS 16.0 and later to add a 2G external
Unit: None
cell.
Use this command
Value Range: 0 to 7
GBSS 16.0 and later to add a 2G external
Unit: None
cell.
Use this command
Value Range: 0 to 7
GBSS 16.0 and later to add a 2G external
Unit: None
cell.
Use this command
Default Value: NO(No)
GBSS 16.0 and later to add a 2G external
Unit: None
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
 Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command
GBSS 16.0 and later to add a 2G external NA
cell.
Use this command Value Range: 1 to 256
GBSS 16.0 and later to add a 2G external characters
cell. Unit: None
Use this command Default Value: BYCGI(By
GBSS 16.0 and later to add a 2G CGI)
neighboring cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 2G 2047
neighboring cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 2G 12287
neighboring cell. Unit: None
Use this command GUI Value Range: 1 to 3
GBSS 16.0 and later to add a 2G characters
neighboring cell. Unit: None
Use this command GUI Value Range: 1 to 3
GBSS 16.0 and later to add a 2G characters
neighboring cell. Unit: None
Use this command GUI Value Range: 1 to
GBSS 16.0 and later to add a 2G 65533, 65535
neighboring cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 2G 65535
neighboring cell. Unit: None
 Use this command GUI Value Range: 1 to 3
GBSS 16.0 and later to add a 2G characters
neighboring cell. Unit: None
Use this command GUI Value Range: 1 to 3
GBSS 16.0 and later to add a 2G characters
neighboring cell. Unit: None
Use this command GUI Value Range: 1 to
GBSS 16.0 and later to add a 2G 65533, 65535
neighboring cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 2G 65535
neighboring cell. Unit: None
Default Value:
Use this command
HANDOVERNCELL(Hando
GBSS 16.0 and later to add a 2G
ver Neighboring Cell)
neighboring cell.
Unit: None
Use this command
GBSS 16.0 and later to add a 2G NA
neighboring cell.
Use this command Value Range: 0 to 127
GBSS 16.0 and later to add a 2G Default Value: 68
neighboring cell. Unit: dB
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 2G Default Value: 0
neighboring cell. Unit: dB
Use this command Value Range: 0 to 127
GBSS 16.0 and later to add a 2G Default Value: 68
neighboring cell. Unit: dB
Use this command Value Range: 0 to 127
GBSS 16.0 and later to add a 2G Default Value: 69
neighboring cell. Unit: dB
Value Range: NO(No),
Use this command
YES(Yes)
GBSS 16.0 and later to add a 2G
Default Value: NO(No)
neighboring cell.
Unit: None
Use this command Value Range: 0 to 127
GBSS 16.0 and later to add a 2G Default Value: 67
neighboring cell. Unit: dB
Value Range:
Use this command Value Range: 0 to 128
QUICK_HO_NCELL_TYPE
GBSS 16.0 and later to add a 2G Default Value: 72
_A(QUICK_HO_NCELL_TY
neighboring cell. Unit:
PE_A),dB
QUICK_HO_NCELL_TYPE
Use this command
_B(QUICK_HO_NCELL_TY
GBSS 16.0 and later to add a 2G
PE_B)
neighboring cell.
Default Value:
Value Range: 1 to 32
QUICK_HO_NCELL_TYPE
Use this command
Default Value: 6
_A(QUICK_HO_NCELL_TY
GBSS 16.0 and later to add a 2G
Unit:
PE_A) 470ms(SDCCH);
neighboring cell.
480ms(TCH)
Unit: None
Value Range: 1 to 32
Use this command
Default Value: 4
GBSS 16.0 and later to add a 2G
Unit: 470ms(SDCCH);
neighboring cell.
480ms(TCH)
Value Range: 1 to 32
Use this command
Default Value: 8
GBSS 16.0 and later to add a 2G
Unit: 470ms(SDCCH);
neighboring cell.
480ms(TCH)
 Value Range: 1 to 32
Use this command
Default Value: 6
GBSS 16.0 and later to add a 2G
Unit: 470ms(SDCCH);
neighboring cell.
480ms(TCH)
Use this command Value Range: 1 to 32
GBSS 16.0 and later to add a 2G Default Value: 8
neighboring cell. Unit: 480ms
Use this command Value Range: 1 to 32
GBSS 16.0 and later to add a 2G Default Value: 6
neighboring cell. Unit: 480ms
Value Range: 1 to 32
Use this command
Default Value: 4
GBSS 16.0 and later to add a 2G
Unit: 470ms(SDCCH);
neighboring cell.
480ms(TCH)
Value Range: 1 to 32
Use this command
Default Value: 3
GBSS 16.0 and later to add a 2G
Unit: 470ms(SDCCH);
neighboring cell.
480ms(TCH)
Use this command Value Range: 0 to 127
GBSS 16.0 and later to add a 2G Default Value: 64
neighboring cell. Unit: None
Value Range: NO(No),
Use this command
YES(Yes)
GBSS 16.0 and later to add a 2G
Default Value: NO(No)
neighboring cell.
Unit: None
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 2G Default Value: 20
neighboring cell. Unit: dB
Use this command Value Range: 0 to 255
GBSS 16.0 and later to add a 2G Default Value: 10
neighboring cell. Unit: s
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 2G Default Value: 10
neighboring cell. Unit: dB
Use this command GUI Value Range: 5048 to
GBSS 16.0 and later to add a 3G external 15287
cell. Unit: None
Use this command GUI Value Range: 1 to 64
GBSS 16.0 and later to add a 3G external characters
cell. Unit: None
Use this command
GUI Value Range: 3 digits
GBSS 16.0 and later to add a 3G external
Unit: None
cell.
Use this command GUI Value Range: 2 to 3
GBSS 16.0 and later to add a 3G external digits
cell. Unit: None
Use this command GUI Value Range: 1 to
GBSS 16.0 and later to add a 3G external 65533, 65535
cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 3G external 65535
cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add a 3G external 4095
cell. Unit: None
 Use this command
GBSS 16.0 and later to add a 3G external NA
cell.
Use this command
GBSS 16.0 and later to add a 3G external NA
cell.
Use this command
GBSS 16.0 and later to add a 3G external NA
cell.
Use this command
Default Value: FDD(FDD)
GBSS 16.0 and later to add a 3G external
Unit: None
cell.
Use this command Value Range: 0 to 49
GBSS 16.0 and later to add a 3G external Default Value: 30
cell. Unit: None
Use this command Value Range: 0 to 49
GBSS 16.0 and later to add a 3G external Default Value: 25
cell. Unit: None
Use this command Value Range: 0 to 49
GBSS 16.0 and later to add a 3G external Default Value: 23
cell. Unit: None
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 3G external Default Value: 10
cell. Unit: None
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 3G external Default Value: 30
cell. Unit: dB
Use this command Value Range: 0 to 63
GBSS 16.0 and later to add a 3G external Default Value: 20
cell. Unit: None
Value Range: NO(No),
Use this command
YES(Yes)
GBSS 16.0 and later to add a 3G external
Default Value: NO(No)
cell.
Unit: None
Use this command Value Range: 0 to 100
GBSS 16.0 and later to add a 3G external Default Value: 80
cell. Unit: %
Use this command Value Range: 1 to 256
GBSS 16.0 and later to add a 3G external characters
cell. Unit: None
Use this command Value Range: 0 to 255
GBSS 16.0 and later to add a 3G external characters
Use
cell. this command Unit: None
to add a 3G
neighboring cell. The Default Value: BYID(By
GBSS 16.0 and later source cell is a 2G Index)
Use thiscell
internal command
and the Unit: None
to add a
neighboring3G cell is a
neighboring cell. The
3G external cell. GUI Value Range: 0 to
GBSS 16.0 and later source cell is a 2G 2047
Use thiscell
internal command
and the Unit: None
to add a
neighboring3G cell is a
neighboring cell. The
3G external cell. GUI Value Range: 5048 to
GBSS 16.0 and later source cell is a 2G 15287
internal cell and the Unit: None
neighboring cell is a
3G external cell.
 Use this command
to add a 3G
neighboring cell. The Value Range: 0 to 63
GBSS 16.0 and later source cell is a 2G Default Value: 3
Use thiscell
internal command
and the Unit: None
to add a 3G cell is a
neighboring
neighboring cell. The
3G external cell. Value Range: 0 to 49
GBSS 16.0 and later source cell is a 2G Default Value: 3
Use thiscell
internal command
and the Unit: None
to add a 3G cell is a
neighboring
neighboring cell. The
3G external cell. Value Range: 1 to 32
GBSS 16.0 and later source cell is a 2G Default Value: 10
Use thiscell
internal command
and the Unit: 480ms
to add a 3G cell is a
neighboring
neighboring cell. The
3G external cell. Value Range: 1 to 32
GBSS 16.0 and later source cell is a 2G Default Value: 8
Use thiscell
internal command
and the Unit: 480ms
to add a 3G cell is a
neighboring
neighboring cell. The
3G external cell.
GBSS 16.0 and later source cell is a 2G NA
internal cell and the
neighboring cell is a
Use this command
3G external cell. GUI Value Range: 8048 to
GBSS 16.0 and later to add an external 18287
LTE cell. Unit: None
Use this command GUI Value Range: 1 to 64
GBSS 16.0 and later to add an external characters
LTE cell. Unit: None
Use this command
GUI Value Range: 3 digits
GBSS 16.0 and later to add an external
Unit: None
LTE cell.
Use this command GUI Value Range: 2 to 3
GBSS 16.0 and later to add an external digits
LTE cell. Unit: None
Value Range:
Use this command
MACRO(MACRO),
GBSS 16.0 and later to add an external
HOME(HOME)
LTE cell.
Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to add an external 268435455
LTE cell. Unit: None
Use this command GUI Value Range: 1 to
GBSS 16.0 and later to add an external 65533, 65535
LTE cell. Unit: None
Use this command
GBSS 16.0 and later to add an external NA
LTE cell.
Use this command
GBSS 16.0 and later to add an external NA
LTE cell.
Use this command Value Range: FDD(FDD),
GBSS 16.0 and later to add an external TDD(TDD)
LTE cell. Unit: None
Use
Use this
this command
command Value Range: 1 to 256
GBSS 16.0 and later to
to add the
add an external characters
neighboring
LTE cell. Unit: None
relationship between
a GSM cell and an Default Value: BYID(By
GBSS 16.0 and later LTE cell. In this Index)
case, the GSM cell Unit: None
is the source cell,
whereas the LTE
cell is a neighboring
cell.
 Use this command
to add the
neighboring
relationship between
Use
a GSM thiscell
command
and an GUI Value Range: 0 to
GBSS 16.0 and later to add the
LTE cell. In this 2047
neighboring
case, the GSM cell Unit: None
relationship
is thethis
source between
cell,
Use
a GSM command
cell and an GUI Value Range: 8048 to
whereas
to add the LTE
theIn this
GBSS 16.0 and later LTE cell.
cell is a neighboring 18287
neighboring
case,
cell. the GSM
relationship
cell
between
Unit: None
Value Range:
is
Usethethis
source cell,
command UNSUPPORT(UNSUPPOR
a GSM cell
whereas and
LTEan
GBSS 16.0 and later to
LTEadd thethe
cell. In this
T), SUPPORT(SUPPORT)
cell is a neighboring
neighboring DefaultRange:
Value Value:
case,
cell. the GSM cell
relationship between SUPPORT(SUPPORT)
UNSUPPORT(UNSUPPOR
is
Usethethis
source cell,
command
a GSM cell and an Unit:
T), None
SUPPORT(SUPPORT)
whereas
to add the LTE
theIn this
GBSS 16.0 and later LTE cell.
cell is a neighboring Default Value:
neighboring
case, Value Range:
cell. the GSM
relationship
cell
between
UNSUPPORT(UNSUPPOR
UNSUPPORT(UNSUPPOR
is
Usethethis
source cell,
command T)
a GSM cell
whereas and
LTEan T), SUPPORT(SUPPORT)
GBSS 16.0 and later to
LTEadd thethe
cell. In this
Unit: None
Default Value:
cell is a neighboring
neighboring
case,
cell. the GSM cell UNSUPPORT(UNSUPPOR
relationship
is the sourcebetween
cell, T)
a GSM cell
whereas theand
LTEan Unit: None
GBSS 16.0 and later LTE
cell iscell. In this
a neighboring NA
case,
cell. the GSM cell
is the source cell,
Use
whereasthis command
the LTE Default Value: BYID(By
GBSS 16.0 and later to
cell is the
set 2G BA1
a neighboring index)
parameters
cell. of a cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to set the 2G BA1 2047
parameters of a cell. Unit: None
Use this command
Default Value: AUTO(Auto)
GBSS 16.0 and later to set the 2G BA1
Unit: None
parameters of a cell.
Use this command Default Value: BYID(By
GBSS 16.0 and later to set the 2G BA2 index)
parameters of a cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to set the 2G BA2 2047
parameters of a cell. Unit: None
Use this command
Default Value: AUTO(Auto)
GBSS 16.0 and later to set the 2G BA2
Unit: None
parameters of a cell.
Use this command
Default Value: BYID(By
to set FDD BA1
GBSS 16.0 and later index)
entries in idle
Unit: None
parameters of a cell.
Use this command
GUI Value Range: 0 to
to set FDD BA1
GBSS 16.0 and later 2047
entries in idle
Unit: None
parameters of a cell.
Use this command
to set FDD BA1 Default Value: AUTO(Auto)
GBSS 16.0 and later
entries in idle Unit: None
parameters of a cell.
Use this command Default Value: BYID(By
GBSS 16.0 and later to set the FDD BA2 index)
parameters of a cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to set the FDD BA2 2047
parameters of a cell. Unit: None
 Use this command
Default Value: AUTO(Auto)
GBSS 16.0 and later to set the FDD BA2
Unit: None
parameters of a cell.
Use this command Default Value: BYID(By
GBSS 16.0 and later to activate a GSM index)
internal cell. Unit: None
Use this command GUI Value Range: 0 to
GBSS 16.0 and later to activate a GSM 2047
internal cell. Unit: None
Use this command GUI Value Range：
to remove the BYNAME(By name),
GBSS 16.0 and later information about BYID(By index), BYCGI(By
2G neighboring CGI)
Use
cells.this command Unit: None
to remove the GUI Value Range：1~3
GBSS 16.0 and later information about characters
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：1~3
GBSS 16.0 and later information about characters
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：
GBSS 16.0 and later information about 1~65533, 65535
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：
GBSS 16.0 and later information about 0~65535
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：1~3
GBSS 16.0 and later information about characters
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：1~3
GBSS 16.0 and later information about characters
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：
GBSS 16.0 and later information about 1~65533, 65535
2G neighboring Unit: None
Use
cells.this command
to remove the GUI Value Range：
GBSS 16.0 and later information about 0~65535
2G neighboring Unit: None
Use
cells.this command GUI Value Range：
to remove the
BYNAME(By Name),
GBSS 16.0 and later information about
BYID(By Index)
3G neighboring
Use Unit: None
cells.this command
to remove the
GUI Value Range：0~7999
GBSS 16.0 and later information about
Unit: None
3G neighboring
Use
cells.this command
to remove the GUI Value Range：
GBSS 16.0 and later information about 0~19999
3G neighboring
Use this command Unit: None
cells.
to remove the GUI Value Range：
neighboring BYNAME(By Name),
GBSS 16.0 and later
relationship between BYID(By Index)
Use
a GSM thiscell
command
and an Unit: None
to
LTE cell. the
remove
neighboring GUI Value Range：0~7999
GBSS 16.0 and later
relationship between Unit: None
a GSM cell and an
LTE cell.
 Use this command
to remove the
GUI Value Range：
neighboring
GBSS 16.0 and later 0~19999
relationship between
Unit: None
a GSM cell and an
LTE cell.
 Parameter Value Type
Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE clientinclude
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE clientinclude
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters: includes
and the value range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Non-MAE-optimized parameters:
the objects that are filtered include
according to
the non-identity-related
algorithm requirements. parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
from NEs.
Non-MAE-optimized parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Range-value
from NEs. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters:
and the valueincludes
range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the
the values of these parameters. MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Non-MAE-optimized parameters:
the objects that are filtered include
according to
the non-identity-related
algorithm requirements. parameters that
the MAE does
Fixed-value not optimize.
parameters: The the
include MAE
obtains the values
parameters of these
for which the MAEparameters
provides
from NEs.
built-in default values that are displayed
on the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
users. The MAE delivers the fixed values
of these parameters based on the objects
that are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters basedthe MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
users. The MAE delivers the fixed values
of these parameters
Identity-related based on
parameters: the objects
include
that are filtered
parameters suchaccording
as CellId,toIDTYPE,
algorithmMCC,
requirements.
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of theseparameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
Non-MAE-optimized parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
Fixed-value parameters:
obtains the values of theseincludes the
parameters
parameters
from NEs. for which the MAE provides
built-in default values that cannot be
modified by users.
Fixed-value The MAE
parameters: delivers
include the the
fixed values for
parameters of these
which parameters based on
the MAE provides
the objects
built-in thatvalues
default are filtered according
that are displayedto
algorithm
on the MAE requirements.
client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
users. The MAE delivers the fixed values
of these parameters
Range-value basedinclude
parameters: on the the
objects
that are filtered
parameters according
for which to algorithm
the MAE calculates
requirements.
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters:
and the value includes
range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such
algorithm requirements.as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
users. The MAE delivers the fixed values
of these parameters based
Non-MAE-optimized on theinclude
parameters: objects
thatnon-identity-related
the are filtered according to algorithm
parameters that
requirements.
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Range-value
from NEs. parameters: include the
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE clientinclude
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters: includes
and the value range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
the objects that are filtered according to
algorithm requirements.
Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related
the values of these parameters:
parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC
Fixed-value primary keyinclude
parameters: and foreign
the key
parameters.for
parameters The MAEthe
which does
MAE notprovides
optimize
the values
built-in of these
default parameters.
values that are displayed
on the MAE client and can be modified by
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
Fixed-value
users. The MAE parameters:
delivers include
the fixedthevalues
parameters for which
of these parameters based the MAE provides
on the objects
built-in
that aredefault
filteredvalues that to
according arealgorithm
displayed
on the MAE client and can be modified by
requirements.
users. The MAE delivers the fixed values
of these parameters based
Non-MAE-optimized on theinclude
parameters: objects
thatnon-identity-related
the are filtered according to algorithm
parameters that
requirements.
the MAE does not optimize. The MAE
Fixed-value parameters:
obtains the values of theseincludes the
parameters
parameters
from NEs. for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements. CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the
the values of these parameters. MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithmdefault values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements. CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the
the values of these parameters. MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithmdefault values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements. CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the
the values of these parameters. MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithmdefault values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements. CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
Fixed-value parameters: includes the
parameters for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithmdefault values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.
 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description

UMTS to GSM ADD Unique ID of a

GSMCellIndex RNC
IPO UEXT2GCELL GSM cell
A name
UMTS to GSM ADD identifying a
GSMCellName RNC
IPO UEXT2GCELL GSM cell
When
uniquely.
The the switch
Index of
is turned
neighboring on,
UMTS to GSM ADD periodic
NBscIndex BSC thatquery the RNC
IPO UEXT2GCELL and
GSMreporting
cell of
load on
belongs to. a 2G cell
is enabled.
UMTS to GSM ADD
LdPrdRprtSwitch Mobile country RNC
IPO UEXT2GCELL
When This
code. the switch
is turned off,
parameter
UMTS to GSM ADD Mobile
periodic
identifies network
query
the
MCC code. This
and reporting RNC
IPO UEXT2GCELL country whereofa
parameter
load on a 2G cell
mobile
identifies
is disabled.
subscriber the
is
UMTS to GSM ADD public
located. land
MNC RNC
IPO UEXT2GCELL mobile network
(PLMN)
Index of toanwhich
Cn
a mobile Group
Operator
UMTS to GSM ADD subscriber
CnOpGrpIndex whose users can RNC
IPO UEXT2GCELL belongs.
be handed over
to the GSM cell.
Locationarea
Routing Area
UMTS to GSM ADD
LAC Code (LAC)
code. This of RNC
IPO UEXT2GCELL
the GSM cell.
parameter
defines a routing
UMTS to GSM ADD area within a
RAC RNC
IPO UEXT2GCELL location area for
the PLMN of
GSM-MAP type.
UMTS to GSM ADD Identifying
RAC is defined a
CID RNC
IPO UEXT2GCELL GSM
Uniquely cell.
by the operator.
identifying the
different network
UMTS to GSM ADD
NCC in the RNC
IPO UEXT2GCELL
neighboring
Uniquely
area.
identifying a
UMTS to GSM ADD neighboring
BCC RNC
IPO UEXT2GCELL base
Whenstation
the inter-with
Identifying
the same
RAT cell the
carrier.
Identifying
type of the inter-
UMTS to GSM ADD frequency
BCCH frequency
BcchArfcn RAT
number cell is RNC
IPO UEXT2GCELL number
NO_CAPABILIT of within
the
the range
inter-RAT 512-
cell.
Y indicates
810, the that
UMTS to GSM ADD the
parameter of
capacity
BandInd the GSM cell RNC
IPO UEXT2GCELL indicates
remains
whether this
unknown.
frequency It is
UMTS to GSM ADD not
number belongs
RatCellType RNC
IPO UEXT2GCELL recommended
to the DSC1800 to
Indicating
set the cellthe
type
or PCS1900
network control
to
frequency band.
UMTS to GSM ADD mode, refer
NO_CAPABILIT to
NcMode RNC
IPO UEXT2GCELL the 3GPP TS
Y. If the cell type
45.008
is protocol.
NO_CAPABILIT
Y, the inter-RAT
handover cannot
08/24/2023 be triggered.
华为保密信息,未经授权禁止扩散 第288页，共633页
 [BandId], as
shown
Band8:below:
UL
frequency = DL
Band1
frequency - 225
686970386.xls 文档密级
Source of
Common
Band9: UL
neighboring
frequencies
frequency = DL
cells. When this
[10562-10838]
UMTS to GSM ADD frequency - 475
RNCId parameter
ID of an RNC
Uniquely is set RNC
IPO U2GNCELL to USER,
Special
identifying
If the DL a
neighboring
WCDMA cell,cells
frequencies to
frequency
UMTS to GSM ADD are
none
which configured
CellId belongs to RNC
IPO U2GNCELL by users. When
neighboring
special
this
Band2
GSM parameter
cells can is
frequencies,
set
be to SONOPTI,
added.
Unique ID of a
UMTS to GSM ADD then
GSMCellIndex neighboring
GSM cell cells
Common RNC
IPO U2GNCELL are configured
frequencies
Band2: UL
by the SON
[9662-9938]
frequency = DL
feature based
UMTS to GSM ADD frequency - 400
U2GNcellSRC on the
Special RNC
IPO U2GNCELL
optimization
frequencies
UMTS to UMTS Band4: UL
results.
{412, 437,When
intra-frequency frequency
Identifying =462,
aDLis
ADD this
487, parameter
512, 537,
IPO / UMTS to NRncId frequency - 300
Neighboring RNC
UEXT3GCELL set
562,to587, 612,
UMTS inter- RNC.
SONMEAS,
UMTS to UMTS 637,
Band5: 662, UL687}
frequency IPO Uniquely
neighboring cells
intra-frequency frequency =a DL
ADD identifying
are configured
IPO / UMTS to CellId Band3
frequency - 225 RNC
UEXT3GCELL neighboring
during the
UMTS inter-
UMTS to UMTS RNC cell.
optimization of
frequency IPO Common
Band6: UL
intra-frequency the SON
frequencies feature,
ADD Identifying
frequency =a DL cell
IPO / UMTS to CellName which helps
[1162-1513] RNC
UEXT3GCELL name.
frequency - 225
UMTS inter- detect missing
UMTS to UMTS
frequency IPO This parameter
Index of the
neighboring
Special
intra-frequency indicates
Band7: UL
ADD operator
cells.
frequencies group
IPO / UMTS to CnOpGrpIndex whether
frequency to=aDL RNC
UEXT3GCELL that
none serves
UMTS inter- configure
frequencythe - 225UL
UMTS to UMTS cell.
frequency IPO Primary
frequency of the
intra-frequency Band4
ADD downlink
cell. TRUE on
Depending
IPO / UMTS to PScrambCode RNC
UEXT3GCELL scrambling
indicates
the value that
of
UMTS inter- This
Common parameter
UMTS to UMTS code.
the UL
[BandId], as
frequency IPO specifies the
frequencies
intra-frequency frequency
shown need
below:
ADD selected
[1537-1738]
IPO / UMTS to BandInd be reconfigured. RNC
UEXT3GCELL frequency bands
UMTS inter- FALSE
Band1 indicates
UMTS to UMTS during
Special
Whether cell to
frequency IPO that the UL
intra-frequency setup.
frequencies
activate the
ADD frequency need
Common
IPO / UMTS to UARFCNUplinkInd {1887, RNC
UEXT3GCELL not be 1912,
transmit
frequencies diversity
UMTS inter- 1937,
mode 1962, It
for
UMTS to UMTS reconfigured.
[9612-9888]
frequency IPO 1987,
common 2012,
intra-frequency is configured
ADD 2037,
channels 2062,
automatically in a
IPO / UMTS to UARFCNUplink Special RNC
UEXT3GCELL 2087}
cell.
based on the
UMTS inter- frequencies
UMTS to UMTS
frequency IPO relationship
none
intra-frequency Band5
Transmit
between UL and
ADD
IPO / UMTS to UARFCNDownlink diversity enables
DL frequencies.
Band2 RNC
UEXT3GCELL
UMTS inter- Common
the
NULL transmit
indicates end
UMTS to UMTS
frequency IPO This parameter
frequencies
to use
that the UL
Common two or
intra-frequency identifies
[4357-4458]
ADD more
frequencyantennas
frequencies
IPO / UMTS to TxDiversityInd whether to RNC
UEXT3GCELL for transmitting
remains
[9262-9538]
UMTS inter- configure
Special RAC.
UMTS to UMTS signals.
unchanged. Each
frequency IPO This
If the parameter
RNC
frequencies
intra-frequency antenna
Special is
ADD identifies
supports
{1007,
assigned a PS
the
1012,
IPO / UMTS to LAC frequencies {12, RNC
UEXT3GCELL location
domain,
1032, area
this
UMTS inter-
UMTS to UMTS 37, 62,1037,
different
code.
parameter
weight
87, 112,
must
frequency IPO 1062,
137, 1087}
coefficients,
intra-frequency be
such set162,
as to 187,
ADD 212, 237, 262,
IPO / UMTS to CfgRacInd REQUIRE.
Band6
amplitude and RNC
UEXT3GCELL 287}
UMTS inter- phase, to
UMTS to UMTS
frequency IPO GUI
This
Common
improve parameter
the
intra-frequency Band3
NOT_REQUIRE
ADD indicates
frequencies
reception the
IPO / UMTS to RAC (Not configure RNC
UEXT3GCELL routing
[4387-4413]
performance area of
UMTS inter- Common
RAC
code.
the receive end.
frequency IPO frequencies
information),
Special
[937-1288]
REQUIRE(Confi
frequencies
gure
{1037, RAC1062}
Special
information)
08/24/2023 华为保密信息,未经授权禁止扩散 frequencies
Band7
第289页，共633页
none
Common
Band4
 is defined as
activating a new
follows:
Time
configuration that canifbe
Default
taken
the reconfigured bytime the
Srxlev>0 AND
offset
NodeB
RL used
transmitsto for
686970386.xlsSqual>0 文档密级
activating
process
signalingan a new
at a
configuration
NBAP
rate of RADIO
13.6 if
UMTS to UMTS Where:
Time that can be
the
LINK reconfigured
kbit/s. by the
intra-frequency taken
ADD MidRateRlActTimeDefOff RL
RECONFIGURA
-NodeB
transmits
Squal to =
IPO / UMTS to signaling
TION COMMIT at a RNC
UEXT3GCELL Val This
Qqualmeas
process parameter
an -
UMTS inter- rate
message
Time of 27.2
that during
can be
UMTS to UMTS is
Qqualmin
NBAP an advanced
RADIO
frequency IPO kbit/s.
a
taken reconfiguration
by theTo
intra-frequency parameter.
ADD HighRateRlActTimeDefOf LINK
ifmodify
NodeB the this
IPO / UMTS to Srxlevto
-RECONFIGURA = RNC
UEXT3GCELL fVal This
reconfigured
process
parameter, parameter
an -RL
UMTS inter- Qrxlevmeas
TION COMMIT
UMTS to UMTS is
transmits
NBAP
contact an advanced
RADIO
Huawei
frequency IPO Qrxlevmin
message -
during
intra-frequency parameter.
signaling
LINK at To
a
ADD OamGuardValForLowRat TimeCustomer
Pcompensation
a
modify
offset
reconfiguration
this
used
IPO / UMTS to rate
RECONFIGURA
for
Service of 3.4
activating Centerkbit/s a RNC
UEXT3GCELL e ifor the
parameter,
UMTS inter- TION
new
for 6.8 kbit/s.
COMMIT
technical
UMTS to UMTS -reconfigured
Qqualmeas is
RL
frequency IPO contact
message
configuration
support. Huawei
during
intra-frequency the
transmits
Time measured
offset used
ADD OamGuardValForMidRat This Customer
a
during parameter
reconfiguration
a hard
IPO / UMTS to cell
signaling
for quality
activating at a a RNC
UEXT3GCELL e Service
is
ifvalue,an
theof namely
handover Center
advanced if the
UMTS inter- rate
new
for technical
parameter. 13.6 ToRL
UMTS to UMTS
frequency IPO reconfigured
CPICH
kbit/s. Ec/No.
intra-frequency configuration
support.
modify
transmits this
ADD OamGuardValForHighRat Default
during
parameter, atime
hard
IPO / UMTS to signaling
-offset used
Qrxlevmeas at for
a RNC
UMTS inter-
UEXT3GCELL e This
handover
contact
rate
parameter
of Huawei
27.2
3.4 theis
ifkbit/s
UMTS to UMTS activating
the
is anmeasured
reconfiguredadvanced a new RL
frequency IPO Customer
kbit/s.
or 6.8
configuration kbit/s and for
intra-frequency cell
parameter.
transmits
This RX levelTo
parameter
ADD Service
ActTimeDefOffValForUnc value,
no
a HSPA Center
reconfiguration
IPO / UMTS to modify
signaling
indicates namely
this at a RNC
UEXT3GCELL ellNoH for
This
service technical
performed parameter
exists. within
UMTS inter- CPICH
parameter,
rate
whether of RSCP.
3.4 to kbit/s
UMTS to UMTS support.
is
the ansame
advanced cell if
frequency IPO contact
or Huawei
6.8parameter
configure kbit/s the and
intra-frequency parameter.
This
the
- reconfigured
Qrxlevmin
Customer To
is
ADD ActTimeDefOffValForUnc minimum
an
modify
is HSPA
an this
advanced quality
IPO / UMTS to radio
the
Service link
minimum Center RNC
UEXT3GCELL ellH service
level.
parameter,
parameter. exists.
When Toit is
UMTS inter- transmits
required
for technical quality
UMTS to UMTS
frequency IPO set
contact
modify to FALSE,
Huawei
this
signaling
level
support.
This in adopts
the
parameter atcell.
a
intra-frequency
ADD ActTimeDefOffValForSam the Minimum
Customer
rate
is
UE
parameter,of 3.4
an advanced kbit/s
IPO / UMTS to the
Whether
required
Service
contact to
RX
Center
Huawei RNC
UEXT3GCELL eCell or 6.8 kbit/s.
-corresponding
Pcompensation
parameter. To
UMTS inter- configure
threshold
for technical
Customer the
UMTS to UMTS
frequency IPO =
modify this
value
minimum
corresponding
support.
Service
This of the
Centerto
parameter
intra-frequency max(UE_TXPW
parameter,
ADD current
receive
the
for
is CPICH
technicalserving
an advancedlevel for
IPO / UMTS to QqualminInd R_MAX_RACH-
contact Huawei RNC
UEXT3GCELL cell,
a
RSCP.
support. added
cell.
parameter. IfA this
UE
UMTS inter- P_MAX,
Customer
through 0) To
the ADD
UMTS to UMTS
frequency IPO parameter
can
Whether
modify camp this aon is
cell set
a
intra-frequency Service
UCELLSELRES
to
cell FALSE,
supports only Center
if
the the
the
ADD parameter,
-Extended
for technical value
IPO / UMTS to Qqualmin EL
UE command.
usesHuawei
measured
minimum
contact the RNC
UEXT3GCELL UE_TXPWR_M
for the
support.
This minimum
parameter
UMTS inter- value
CPICH
receive
Customer ofRSCP
thisis the
level is
UMTS to UMTS AX_RACH
receive
is generally level. set
frequency IPO parameter
greater
extension
Service than
Centerset the in
intra-frequency maximum
The
to actual
FALSE. TX
When
ADD ADD
value
function.
for
power of
technical this
IPO / UMTS to
UEXT3GCELL
QrxlevminInd is setlevel
minimum
itparameter.
UCELLSELRES
support. to TRUE, a RNC
UMTS inter- UE
receive
the formay
UE use
level
adopts is In
UMTS to UMTS EL
The
when the
minimum
accessing cell.
frequency IPO equal
the value to the
in ADD sum
intra-frequency normal
Setting
receive
the cell cases,
this
level
on
ADD of Qrxlevmin
UEXT3GCELL
this parameter
IPO / UMTS to
UEXT3GCELL
Qrxlevmin parameter
extension
RACH,
and
command. namely is RNC
UMTS inter- set
based to
function FALSE.
MaxAllowedULTon the to
refers
UMTS to UMTS
frequency IPO DeltaQrxlevmin.
This
setting parameter
of
that
xPower. the sum of
intra-frequency affects
Qqualmin. the and cell
ADD Qrxlevmin
IPO / UMTS to QrxlevminExtSup The
This
camping minimum
parameter RNC
UEXT3GCELL DeltaQrxlevmin
ThisP_MAXparameter
-indicates is the
UMTS inter- receive
success level
rate
UMTS to UMTS If
is this
usedparameter
specifies
maximum as the theof
RF
frequency IPO extension
whether
UEs
is not in idle
set, tothe
intra-frequency actual
maximum
output minimum
power
ADD function
configure
mode.
UE the ofto
refers
IPO / UMTS to
UEXT3GCELL
DeltaQrxlevmin the uses
receive
allowed
that UE.
maximumthe
the
level
uplink
sum TXof
RNC
UMTS inter- value
when
TX power of value
the of a
UMTS to UMTS Qrxlevmin
power.
Qrxlevmin
of Qrxlevmin and
setisin
frequency IPO UE
As in
for the
the cell.
impact
intra-frequency DeltaQrxlevmin
ADD
ADD MaxAllowedUlTxPowerIn less When
on
is
than
network
used this -115
as the
IPO / UMTS to GUI
UCELLSELRES
dBm. RNC
UEXT3GCELL d parameter
performance:
actual minimum is not
UMTS inter- TRUE(Configure
EL for the cell.
UMTS to UMTS
frequency IPO set to
receive
the any level value,
intra-frequency For maximum
Whether
Usually,
the
The details
UE
larger
a cell
this
adopts about
the
ADD when
uplink
uses
parameter
this the
power
HCS.
parameter, value
is notof
IPO / UMTS to MaxAllowedUlTxPower the
value
of
UE), of
Qrxlevmin the
FALSE(Not is RNC
UEXT3GCELL set.
see 3GPP is, TS
UMTS inter- corresponding
parameter
less than -115
configure the the
UMTS to UMTS
frequency IPO In a HCS
25.331.
value of the
more
dBm.
maximum difficult uplink it is
intra-frequency network,
current macro
serving
ADD for the of
power UE UE) to
IPO / UMTS to UseOfHcs cells
cell, provide
added RNC
UEXT3GCELL camp
For on the
details about
UMTS inter- continuous
through the ADD
cell. The
this parameter, smaller
frequency IPO coverage
UCELLSELRES and
the value
see 3GPP of the
micro
EL cells TS
command.
parameter
25.331. is, the
provide
Generally, hotspotthis
easier it is for
coverage.
parameter is not
the UE to camp
08/24/2023 华为保密信息,未经授权禁止扩散 set
on theto any cell.value. 第290页，共633页
However, the
value is
excessively
 the indicator is
TRUE, it means
that
HCSthe cell has
priority of
E-DCH SF
the cell belongs
686970386.xls
capability
to. Set a high of 文档密级
2SF2+2SF4.
HCS priority for
UMTS to UMTS a cell if the cell
intra-frequency 7)EDCH_2SF2_
coverage is
ADD SUPPORT(E-
IPO / UMTS to HCSPrio small. The value RNC
UEXT3GCELL DCH max SF
UMTS inter- 0 indicates the
UMTS to UMTS
frequency IPO support
lowest HCS 2SF
intra-frequency Quality
indicator):
priority and threshold
when
7
ADD
IPO / UMTS to Qhcs for
the HCS
indicator
Indicator
indicates for the is RNC
UEXT3GCELL
UMTS inter- reselection.
TRUE,
closed itHCS
loop
highestindicator.means TX
UMTS to UMTS
frequency IPO STTD
that the
diversity
priority. cell
mode has
intra-frequency This parameter
ADD E-DCH
1. This
Adjustment SF
IPO / UMTS to STTDSupInd indicates RNC
UEXT3GCELL capability
parameter
offset foraclosedof
UMTS inter- whether cell
UMTS to UMTS 2SF2.
indicates
loop TX diversity
frequency IPO supports STTD.
intra-frequency whether
mode 1. aFor cell
ADD
IPO / UMTS to CP1SupInd 8)EDCH_2SF4_
supportscells,
remote closed the RNC
UEXT3GCELL
UMTS inter- SUPPORT(E-
loop TX diversity
recommended
UMTS to UMTS
frequency IPO Specifies
DCH
modemax 1. For the
SF TX
value is
intra-frequency diversity
support
details mode
2SF4
about
ADD ClosedLoopTimeAdjustM OFFSET2. For
IPO / UMTS to on F-DPCH
indicator):
closed loopwhen for
TX RNC
UEXT3GCELL ode other cells, the
UMTS inter- Specifies
the
the non-MIMO
indicator
diversity the
mode isTX
UMTS to UMTS recommended
frequency IPO diversity
users
TRUE, and
1, seeis3GPP modenon-
it means TS
intra-frequency value
ADD on
thatDPCH
DC-HSDPA
the cell
25.214.
OFFSET1. for the
has
For
IPO / UMTS to DpchDivModforOther RNC
UEXT3GCELL non-MIMO
users.
Specifies
E-DCH
details about SFthe usersTX
this
UMTS inter-
UMTS to UMTS and non-DC-
diversity
capability
offset, see mode
of
frequency IPO
intra-frequency HSDPA
According
on F-DPCH
2SF4.
3GPP TS users.
toforthe
ADD
IPO / UMTS to FdpchDivModforOther protocol
the MIMO
25.214. 3GPPusers. RNC
UEXT3GCELL
UMTS inter- TS 25.211, the
9)EDCH_SF4_S
UMTS to UMTS
frequency IPO F-DPCH
Specifiescan
According
UPPORT(E- the
to the
intra-frequency Specifies
use STTD theTX TX
ADD TX diversity
protocol
DCH max 3GPPSF on
IPO / UMTS to DpchDivModforMIMO diversity
diversity mode
mode RNC
UEXT3GCELL DPCH
TS 25.211,
support modeSF4the for
UMTS inter- for the
only. For DC- details
UMTS to UMTS the MIMO
F-DPCH
indicator): canusers.
when
frequency IPO HSDPA
Whether
on this users.
to
intra-frequency use
the STTD
indicator TXis
ADD enable
parameter, HARQ see
IPO / UMTS to FdpchDivModforMIMO diversity
TRUE, it mode
means RNC
UEXT3GCELL According
preamble.
3GPP TS to the
When
UMTS inter- only.the
that For details
cell has
UMTS to UMTS
frequency IPO protocol
this parameter
25.211.
on this 3GPP is
intra-frequency E-DCH
TS 25.211, SF the
ADD set to 0,
parameter,
capability HARQ
of see
IPO / UMTS to DivModforDCHSDPA DC-HSDPA
preamble
3GPP TS is not RNC
UEXT3GCELL SF4.
UMTS inter- feature
25.211. can
enabled. When use
UMTS to UMTS
frequency IPO STTD TX
intra-frequency this parameter
10)EDCH_SF8_ is
ADD diversity
set
Cell to 1,
individual
GUI None, mode
HARQ
IPO / UMTS to CellCapContainerFdd SUPPORT(E-
only. For details, RNC
UEXT3GCELL preamble
UMTS inter- STTD
DCH
see 3GPPmax is
offset(CIO) SFof a
TS
UMTS to UMTS
frequency IPO enabled.
serving
support When
cell,
SF8
intra-frequency 25.211.
HARQ
which ispreamble
used
ADD indicator): when
IPO / UMTS to HarqPreaCap is enabled,
with the CIO
the indicator is RNC
UEXT3GCELL
UMTS inter- HARQ
TRUE,ofpreamble
offset it the
means
UMTS to UMTS
frequency IPO takes effect only
neighboring
that the cell has cell.
intra-frequency on HARQ-
ADD For details
E-DCH SF about
IPO / UMTS to CIO E_FACH
preamble- RNC
UEXT3GCELL this parameter,
capability of
UMTS inter- support
enabled UEs.
UMTS to UMTS see
SF8. 3GPP TS In
frequency IPO indicator.
Indicates
addition,and When
ACK,
intra-frequency 25.331
ADD the indicator
whether
NACK,
description theofis
CQI,
IPO / UMTS to EFachSupInd 11)EDCH_HAR RNC
UEXT3GCELL TRUE,
videophone
preamble,
CIOOffset it and
in (VP)
the
UMTS inter- Q_IR_COMBIN_
UMTS to UMTS indicates
service
postamble
ADD is that
limited
frequency IPO SUPPORT(E-
intra-frequency the
in a cell
cell.supports
messages
UINTERFREQN When can
ADD DCH
E_FACH. support
IPO / UMTS to VPLimitInd the
be indicator
carried
CELL. overis RNC
UEXT3GCELL HARQ IRit
UMTS inter- "TRUE",
the HS-DPCCH.
frequency IPO Combining
indicates that
UMTS to UMTS ADD indicator):
the whenis
ID ofVPanservice
RNC
intra-frequency UINTRAFREQN RNCId the indicator
limited in the is RNC
IPO CELL TRUE,
cell. it means
UMTS to UMTS ADD that the
Unique ID cellofuse a
intra-frequency UINTRAFREQN CellId IR
cellcombine RNC
IPO CELL Mode when
MAC-e PDUs
are received
more than one
time in E-DCH.
08/24/2023 华为保密信息,未经授权禁止扩散
12)EDCH_HAR 第291页，共633页
Q_CHASE_CO
MBIN_SUPPOR
T(E-DCH
 reselection
CPICH when
the UE is
measurementin idle
mode.
value. This
parameter is
686970386.xls
Offset of RSCP
used for 文档密级
neighboring
measurement. cell
CPICH
The offset is ID
Unique
measurement RNC
UMTS to UMTS ADD subtracted from
of a neighboring
value. This
intra-frequency UINTRAFREQN NCellRncId the
Sourceneighboring
of RNC
cell
parameter is
IPO CELL cell
neighboring
used for
measurement Ec/No
UMTS to UMTS ADD cells.
Unique When
measurement. ID ofthis a
intra-frequency UINTRAFREQN NCellId value
parameter
neighboringbefore cell
iscell
set RNC
The offset
reselection. is In
IPO CELL to USER, from
subtracted
handover
neighboring cells
UMTS to UMTS ADD the neighboring
algorithms, this
are
cell configured
intra-frequency UINTRAFREQN IdleQoffset1sn parameter
by users. When is RNC
IPO CELL measurement
usedparameter
for movingis
this
value before
the to
set border
SONOPTI, of cell
a
UMTS to UMTS ADD reselection.
cell. This In
intra-frequency UINTRAFREQN IdleQoffset2sn neighboring
handover cells RNC
parameter
are configured can
IPO CELL algorithms,
be the
configured thisby
by
parameter SON is
UMTS to UMTS ADD the Radio
feature
used
Network forbased
moving
Planner
intra-frequency UINTRAFREQN UintraNcellSRC on
the the
border of aon RNC
IPO CELL (RNP)
optimization based
cell.
the This
actual
results.
parameter When
UMTS to UMTS ADD network.
Whether
this
ID ofparameter
an If can
to
RNC this
send is
inter-frequency UINTERFREQN RNCId be configured
parameter by RNC
the
set systemis set
to
IPO CELL the
to aRadio
larger value,
information
SONMEAS,
Network
Cell
the offset
probabilityPlanner
used
UMTS to UMTS ADD block
neighboring
Unique 11ID(SIB11)ofcells
aon
(RNP)
for
for CPICH
cell based
inter-frequency UINTERFREQN CellId carrying
are
cell configured the RNC
the
RSCP actual
reselection
IPO CELL neighboring
during the cell
network.
measurement
reduces.
information.
optimization
Unique
Cell offset RNC used For
ofID
UMTS to UMTS ADD value
details
the SON inabout
cell
feature,
of
for
NoteaCPICH
neighboring
that in
inter-frequency UINTERFREQN NCellRncId selection
Note
SIB11,
which
cell
Ec/No that see
helps in FDD
or FDD RNC
IPO CELL mode,
reselection
mode, this
this when
3GPP
detect
measurement TS
missing
parameter
the UE isIf in
parameter is
is a
UMTS to UMTS ADD 25.331.
neighboring
value
Unique in cell
ID this
of
valid
Offset
connected
valid only
onlyof thewhen
when
inter-frequency UINTERFREQN NCellId parameter
cells.
selection
neighboring oriscell set RNC
SIB11
measured
mode.
SIB11 Indicator
Indicator
IPO CELL to FALSE,
Whether
reselection to the
send
when
is
is set
CPICH
set as TRUE.
RSCP
asis TRUE.
neighboring
the SIB12
UE in
UMTS to UMTS ADD used
During for
information cell
cell is
carrying
For of a the
connected
CIO details,
reselection see
inter-frequency UINTERFREQN CIOOffset selection
For
not
Offset details,
included
neighboring of orwhen
the see
in
cell RNC
mode.
neighboring
3GPP
the UE
reselection, TS
is in cell.
idle
IPO CELL 3GPP
SIB11.
measured
information. TS
In this For
25.331.
mode.
QOffset1sn
25.331. is
case,
CPICH
details
During theEc/No
about
cell
UMTS to UMTS ADD the cell offset
neighboring
used
SIB12,
selection forsee or cellto
cell
inter-frequency UINTERFREQN SIB11Ind In a cell
corresponding RNC
cannot
reselection
3GPP
reselection, serve
TS whenas
IPO CELL reselection
CPICH RSCP,
the target
UE
25.331.
QOffset1sn is cell
in
If this is for
idle
procedure,
and
access QOffset2sn
or the
cell
UMTS to UMTS ADD mode.
parameter
the cell offset is set
RNC
is the subtracts
reselectioncell offset
by ato
inter-frequency UINTERFREQN IdleQoffset1sn to FALSE,
corresponding the RNC
this offset
corresponding
UEaincell idle from
mode. to
IPO CELL In
neighboring
CPICH RSCP,
the
CPICH
If measured
this Ec/No.
parameter
reselection
information
and
CPICH QOffset2sn
RSCP is of
UMTS to UMTS ADD For
is setdetails
to TRUE, about
procedure,
not
is
a included
the cell
neighboring the
offsetin
inter-frequency UINTERFREQN IdleQoffset2sn QOffset1sn
the neighboring and RNC
RNC
SIB12. subtracts
corresponding
cell If this
and thenissee to
IPO CELL QOffset2sn,
information
this
CPICH
ranks offset
parameter allEc/No. from
is set
UMTS to UMTS ADD 3GPP
included
the
to TSinthe
measured
TRUE,
For details
neighboring
25.331. about
inter-frequency UINTERFREQN SIB12Ind SIB11.
CPICH
neighboring
QOffset1sn In
Ec/No this and of RNC
cells.
case, For
the details,
IPO CELL a neighboring
information
QOffset2sn,
see 3GPP TS issee
QOffset1sn
neighboring
cell andTSthen
included in and cell
UMTS to UMTS ADD 3GPP
25.304.
QOffset2sn are
can
ranks
SIB12.
25.331. serve
allIn as
this the
inter-frequency UINTERFREQN ConnQoffset1sn used
targetwhen
neighboring
case, cell for
the the RNC
IPO CELL UE
access
cells.is inor
Penalty
neighboring idle
time cell for
QOffset1sn
mode, while and
UMTS to UMTS ADD hierarchical
reselection
cellthe
QOffset2sn cell
by
area
ConnQoffset1sn
reselection
UE in
neighboringidle after
mode. cell
inter-frequency UINTERFREQN ConnQoffset2sn used
and when the RNC
IPO CELL a
is
UE UE reselects
preferentially
is in idle a
ConnQoffset2sn
hierarchical
selected as the cell.
mode,
are used while
UMTS to UMTS ADD The
target cellwhen
hierarchical
ConnQoffset1sn for
inter-frequency UINTERFREQN TpenaltyHcsReselect the
cell
accessUE is
or in
reselection cell RNC
and
connected
IPO CELL function
reselection
ConnQoffset2sn enables by
mode.
a
theUE UE in idle
in
are used when
ConnQoffset1sn
mode
connected
the UE toisreselect
in
and
a hierarchical
mode(not
connected
ConnQoffset2sn
cell
include
mode. in the
08/24/2023 华为保密信息,未经授权禁止扩散 are valid only if
network.
CELL_DCH). 第292页，共633页
ConnQoffset1sn
the SIB12
and
message is
ConnQoffset2sn
available. The
are valid only if
 cell for blind
neighboring
indicates thatcell
handovers.
on cell
the cell does not
reselection.
support The
RSCP
Value threshold
FALSE
neighboring
coverage-based cell
686970386.xlsfor triggering
indicates
can be that
involved 文档密级
inter-frequency
blind handovers.
the
in neighboring
cell
handovers. sorting for
If the
cell is RSCP
not
reselection
Value of 1 theonly
UMTS to UMTS ADD value
considered as a
when
indicates its CPICH
that
inter-frequency UINTERFREQN HOCovPrio current
candidate cell cell RNC
Ec/No
the is
cell has above
IPO CELL exceeds
Whether
for
this blind
threshold. thethe
the cell If
highest
value
supports priority
of this the is
handovers.
this
for parameter
coverage-
UMTS to UMTS ADD Indicates
parameter,
measure-based the
Therefore,
set
based to the inter- blind
same
inter-frequency UINTERFREQN BlindHoFlag whether
RNC initiatesthe RNC
directed
handovers
value
frequency as retry to a
IPO CELL signal
blind
(MBDR) quality
handover in
this cell cannot
Qqualmin
handovers. forcellsthe
neighboring
to switch
algorithm. the UE
UMTS to UMTS ADD be
Valuetriggered.
serving 3 cell, If
is
to guaranteed.
the inter-
inter-frequency UINTERFREQN Value
BlindHOQualityCondition Qqualmin
Priority
indicates TRUEof ais not RNC
IPO CELL
the valuethat
parameters
frequency
The
indicates
contained
neighboring TRUE
that
in cell.
the cell has
Qqualmin
neighboring
indicates and
that the
cell.
the
SIB11 cell
Whether
The
lowest or
smaller is SIB12.
to
priority the
UMTS to UMTS ADD Qrxlevmin
This
the threshold
cell for
supports
considered
In this
configure
value ofcase, the as the a
inter-frequency UINTERFREQN NPrioFlag for
the
DRD
MBDR coverage-
neighboring
applies
candidate Ec/No tothis
and load-
the
cell RNC
UE extracts
priority
parameter,
based
cell flag
inter-
related the
the a
for
to
IPO CELL balancing-based
threshold
value
for blind FALSE for
Qqualmin
neighboring
higher
Flag
frequency
SIB11 of the
anda cell from cell.
on
blind
indicates
handovers handovers,
determining thatand
UMTS to UMTS ADD SIB3.
priority
which
handovers.
SIB12 For
theof
are a set to
and
whether
the
blind directed
cell to the
does
handovers not
inter-frequency UINTERFREQN Nprio details,
neighboring
DRD(Direct
different see
values cell. RNC
retries
perform
support
to from
thisDecision)
cell thecan
MBDR. low-
blind
IPO CELL 3GPP
If TS
"NPrioFlag"
Retry
from those for of
frequency-band
handover.
be triggered. If the
25.331.
a
theneighboring
measurement
serving cell, or
UMTS to UMTS ADD cells MBDR,
measured to high-
With
According
cell
this is
LDR(Load set toEc/No
parameter
frequency-band
to thethe
inter-frequency UINTERFREQN DRDEcN0Threshhold of
RNC
3GPPtheselects
False, current
TS
the a RNC
IPO CELL Reshuffling)
should
cells.
cell is
qualified be set to
greater
25.304,
neighboring
measurement
"TRUE". SIf the cell is
Minimum
than thislowest
neighboring
criterion forCPICH cell
cell
UMTS to UMTS ADD has the
performed.
parameter
RSCP for the If this
parameter,
to set up RAB
reselection
priority. this
isset
inter-frequency UINTERFREQN MBDRFlag parameter
InterNCellQualR
neighboring
cell canUE, be isthe cell RNC
for the
defined as
IPO CELL to
on TRUE,
eqFlag
cell
candidate is setthe
cell to
based
follows: on the
Srxlev >
cell
True, can the
reselection.
for DRD.
traffic load be values
The
of>the
UMTS to UMTS ADD 0 and Squal 0
considered
of Qqualmin
neighboring
current cell and as and
cell
inter-frequency UINTERFREQN DrdOrLdrFlag RNC
the
Qrxlevmin
can be
the inter- involvedwhich
IPO CELL Where
measurement
are
in setsorting
cell
frequency through for
UMTS to UMTS ADD object
ADD
reselection
neighboring in theonly cells
inter-frequency UINTERFREQN InterNCellQualReqFlag Squal
DRD
UINTERFREQN = RNC
when
and the
Qqualmeas its CPICH -
IPO CELL Candidate
measurement
CELL
RSCP will
is abovebeflag
measurement
Qqualmin
of a cell ready to
algorithm
used
this
results and
threshold.
on or If
UMTS to UMTS ADD accommodate
LDR
broadcast
inter-frequency UINTERFREQN Qqualmin this
Source
channel
Srxlev parameter
= SIB11 is
ofquality RNC
UEs
set to handed
measurement
through the same
IPO CELL neighboring
of
overthe
Qrxlevmeas
Priority by inter-
ofCLB. -
aIf this
algorithm.
and
value
cells. SIB12.
frequency as
When this
Qrxlevmin
When
candidate
parameter
Otherwise, this -
cell
is
the set
UMTS to UMTS ADD Qrxlevmin
parameter
neighboring
Pcompensation for
is set
inter-frequency UINTERFREQN Qrxlevmin parameter
for
to inter-
FALSE,
values
the serving of is
the set
cell, RNC
to
to USER,
cells.
TRUE,
frequency the
IPO CELL cell is
Qqualmin
Qrxlevmin
neighboring invalid. and
iscells
not
"Qqualmeas"
current
handovers
Qrxlevmin cellin is
which
contained
are
GUI
refersconfigured
FALSE(Do
tothrough
the
UMTS to UMTS ADD listedseton
triggered
are
SIB11 or aSIB12.
by
inter-frequency UINTERFREQN CLBFlag by
not users.
send),
measured
candidate
CLB. 0 and When
cell15 RNC
ADD
In
thisthis case,
parameter
TRUE(Send) theis
IPO CELL CPICH
list during
indicate
UCELLSELRES Ec/No.
the an
UE
set extracts
to SONOPTI, the
inter-frequency
highest
EL will be
Qrxlevmin and used
from
UMTS to UMTS ADD neighboring
"Qrxlevmeas"
handover cells
lowest
and
SIB3. priorities,
broadcast
For
inter-frequency UINTERFREQN CLBPrio are
refersconfigured
triggered toSIB3 the
by the RNC
respectively.
through
details, see
IPO CELL by
CPICH
CLB. theWhen SONRSCP. this
During
and
3GPP SIB4.TSsuch Cell a
feature
parameter based is
UMTS to UMTS ADD handover,
reselection
25.331.
on the
a isset
inter-frequency UINTERFREQN UinterNcellSRC "Qrxlevmin"
to FALSE,
neighboring
performed the
onlycell RNC
Qrxlevmin
optimization
refers to the
IPO CELL current
with
This
when
should a cell
higher
parameter
the be is
signal
set to
results.
minimum
not on
priority isWhen
the CPICH
list.
more
specifies
quality
This
a proper
this in
parameter
parameter the
value, is
receive
likely to power in
UMTS to LTE
ADD ULTECELL LTECellIndex
index
expected
is
to
set used
match
to that to on
be
RNC
IPO the
the current
candidate
uniquely
neighboring cell.
cell
Qqualmin.
SONMEAS,
This parameter identify
cell
is
an list.
identifies
above
LTE cellanin LTE
neighboring
specifies
Pcompensation thecells cell
cell.
Qqualmin
the
are PLMN.
configured and
UMTS to LTE name
= that
ADD ULTECELL LTECellName Qrxlevmin.
EutranCellId
during the RNC
IPO uniquely
max(UE_TXPW
consists
optimization
identifies ofan of LTE-
R_MAX_RACH
eNodeBID
the
cell. SON of 20
feature,
P_MAX, 0)
UMTS to LTE bits
which and helps CellID
ADD ULTECELL EUTRANCELLID RNC
IPO of 8
detect bits,missingthat is
"UE_TXPWR_M
EutranCellId=eN
neighboring
AX_RACH", also
odeBID
cells. x 256 +
named as
CellID. For
"MaxAllowedUL
details about the
TxPower", refers
parameter
08/24/2023 华为保密信息,未经授权禁止扩散 to the maximum 第293页，共633页
description, see
uplink transmit
3GPP TS
power when the
25.413.
UE accesses a
 686970386.xls 文档密级
This
This parameter
parameter
specifies
uniquely
UMTS to LTE Tracking
identifies Area the
ADD ULTECELL MCC Code (TAC) of a RNC
IPO country that an
This
cell. parameter
In principle,
LTE cell belongs
uniquely
base
to. stations in
UMTS to LTE identifies
a certain area the
ADD ULTECELL MNC RNC
IPO network
are managed that an by
LTEMME
an cell belongs
in
to.
specialized
UMTS to LTE
ADD ULTECELL TAC charge of the RNC
IPO
area. The TAC
Index
of each ofcell
an Cn
Operator
This
under Group
parameter
these
UMTS to LTE This parameter
ADD ULTECELL CnOpGrpIndex whose
specifies
base users
the
stations can
is RNC
IPO specifies the
be handed
physical
recorded cell
in over
the
frequency
to the LTE
identity band
of ancell.
MME.
that an TAC
LTE incell
UMTS to LTE LTE
this cell.
area For
should
ADD ULTECELL CellPHYID is on. For RNC
IPO detailed
be configured
detailed
description of
within the value
description
the
This
range.parameter,
parameter
UMTS to LTE about
see 3GPP this TS
ADD ULTECELL LTEBand specifies thesee RNC
IPO parameter,
25.331.
downlink
3GPP TS
frequency
36.104. Band1 used
UMTS to LTE by
to an
Band25LTE cell.
IPO
ADD ULTECELL LTEArfcn Source
For of is
detailed
RNC
Fdd Band.
neighboring
description
Band33 to of
cells.
the When
parameter, this
UMTS to LTE ADD Band43
parameter is Tdd
is
RNCId see
ID
Band.of3GPP
an RNC TSset RNC
IPO ULTENCELL to USER,
36.104.
neighboring cells
UMTS to LTE ADD are
Uniqueconfigured
ID of a
CellId by RNC
IPO ULTENCELL cellusers. When
Thisparameter
this parameteris
specifies
set the
to SONOPTI,
UMTS to LTE ADD index that cells
neighboring
LTECellIndex RNC
IPO ULTENCELL uniquely
are configured
identifies
by the SON an LTE
cell.
feature based
UMTS to LTE ADD
ULTENcellSRC on the RNC
IPO ULTENCELL
optimization
results. When
UMTS to GSM RMV this parameter is
RNCId RNC
set toID RNC
IPO U2GNCELL
SONMEAS,
neighboring cells
UMTS to GSM RMV are
CellId Cellconfigured
ID RNC
IPO U2GNCELL during the
optimization of
UMTS to GSM RMV the SON feature,
GSMCellIndex GSM
whichCell helps Index RNC
IPO U2GNCELL
detect missing
UMTS to UMTS RMV neighboring
intra-frequency UINTRAFREQN RNCId cells.
RNC ID RNC
IPO CELL
UMTS to UMTS RMV
intra-frequency UINTRAFREQN CellId Cell ID RNC
IPO CELL
UMTS to UMTS RMV
RNC ID of a
intra-frequency UINTRAFREQN NCellRncId RNC
neighboring cell
IPO CELL

08/24/2023 华为保密信息,未经授权禁止扩散 第294页，共633页

 686970386.xls 文档密级

UMTS to UMTS RMV

Neighboring Cell
intra-frequency UINTRAFREQN NCellId RNC
ID
IPO CELL
UMTS to UMTS RMV
inter-frequency UINTERFREQN RNCId RNC ID RNC
IPO CELL
UMTS to UMTS RMV
inter-frequency UINTERFREQN CellId Cell ID RNC
IPO CELL
UMTS to UMTS RMV
RNC ID of a
inter-frequency UINTERFREQN NCellRncId Whether to cell RNC
neighboring
IPO CELL perform the self-
UMTS to UMTS RMV planning
Neighboring
function on the Cell
inter-frequency UINTERFREQN NCellId RNC
ID
OSS side
IPO CELL
(excluding the
UMTS to LTE RMV self-planning
RNCId RNC ID in the
function RNC
IPO ULTENCELL
U2000 auto-
deployment
UMTS to LTE RMV step)
CellId Cell IDin cell RNC
IPO ULTENCELL addition or
capacity
UMTS to LTE RMV expansion
LTECellIndex LTE Cell Index
scenarios. When RNC
IPO ULTENCELL
this
The parameter
logical cell is
This
set toparameter
TRUE, the
ID
is uniquely
used to
IPO MOD UCELL CellId self-planning
identifies a cell RNC
differentiate
function on the
in a radio
different
OSS sideMSs
network. is or
cells.
performed
ID of the in cell
IPO MOD UCELL NeedSelfPlanFlag Scrambling
addition or
external cell. RNC
codes
capacity
The cellareIDused
after spread
expansion
cannot conflict
MOD spectrum.
scenarios.
with other cell When
SC planning EXT3GCELLID Therefore,
this in
parameter the is GBSC
GEXT3GCELL IDs the BSC.
bandwidth
set tocells
The
Meaning: FALSE,inof a
the
Type
signal
thean
BSC
of is not
self-planning
are
index
MOD changed.
function on the
numbered
SC planning IDTYPE BYNAME(By GBSC
GEXT3GCELL Instead,
OSS side
sequentially.signals
is not
Name), BYID(By
from different
performed
Index) in cell
sources
addition are or
MOD
SC planning SCRAMBLE differentiated.
capacity GBSC
GEXT3GCELL
Scrambling
expansion
prevents
scenarios. The
MOD Sequence
multiple
Unique ID of a
SC planning CellId self-planning
Number of a DL RNC
UCELLSETUP transmitters
cell
function herefrom
primary
using the the
same
excludes
scrambling code
code word
self-planning for
MOD in a cell. For
spread
SC planning PScrambCode function in the RNC
UCELLSETUP detailed
spectrum. This
Host
U2000 type
informationauto-of a
parameter
cell when
deployment isof
the
this
used parameter,
to
MOD RNC
step.
see node
3GPP TS
SC planning CELLHOSTTYPE differentiate RNC
UEXT3GCELL redundancy
25.213.
differentisMSs on
feature
the uplink and
enabled.
MOD Unique ID of a
differentiate
SC planning CellId RNC
UEXT3GCELL cell
different cells on
the downlink.

08/24/2023 华为保密信息,未经授权禁止扩散 第295页，共633页

 686970386.xls 文档密级

Identifying a
MOD
SC planning NRncId Neighboring RNC
UEXT3GCELL
RNC.
Primary
MOD downlink
SC planning PSCRAMBCODE RNC
UEXT3GCELL scrambling
code.
Indicates the
MOD Indicates
mobile countrythe
SC planning UTRANEXTERN Mcc RNC
code ID of
of the the eNodeB
Indicates
external the
UTRAN
ALCELL external
RNC cellUTRAN
ID
Indicates
cell. The
cell.external theof
28-bit
MOD an
mobile network
UTRAN cell ID is
SC planning UTRANEXTERN Mnc UTRAN
code of the
comprised cell.
of Itthe eNodeB
ALCELL Indicates
uniquely
external the
RNC
primary cellUTRAN
ID and
cell.RNCDL
identifies
the a cell
ID
MOD scrambles
within an ofthat
RNC. the
SC planning UTRANEXTERN PScrambCode are represented
external UTRAN eNodeB
The
by 28-bit
ALCELL cell.the
UTRAN Forleast
details,
cell ID is
significant
see 3GPP 16 TS
MOD comprised
bits and the the
of
25.331.
RNC
SC planning UTRANEXTERN RNCId most cell ID and
significant eNodeB
ALCELL the RNC
12 bits, ID that
are represented
respectively.
MOD by
Thethe least for
formula
SC planning UTRANEXTERN CellId significant
calculating16 the eNodeB
ALCELL bits
UTRAN and cell
the ID is
The
most logical cell
significant
as uniquely
ID follows:
12 bits, cell ID =
UTRAN
SC planning ACT UCELL CellId identifies
respectively.a cell RNC
RNC ID x 65536
in a radio
The
+ RNC formula
logical for
cell
cell ID.
network.
calculating the
ID uniquely
For details, see
SC planning DEA UCELL CellId UTRAN
identifies
3GPP TS cell ID is
a cell RNC
as
in afollows:
25.401.radio
UTRAN
network.cell ID =
UMTS to GSM ADD RNC ID x 65536
EXT3GCELLID Cell
+ RNC Index
cell ID. GBSC
IPO GEXT3GCELL
For details, see
3GPP TS
UMTS to GSM ADD 25.401.
EXT3GCELLNAME Cell Index GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

MCC MCC GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

MNC MNC GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

LAC Cell LAC GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

CI Cell CI GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

RNCID RNC ID GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

DF DL UARFCN GBSC
IPO GEXT3GCELL

08/24/2023 华为保密信息,未经授权禁止扩散 第296页，共633页

 686970386.xls 文档密级

Scrambling
UMTS to GSM ADD
SCRAMBLE Code or Cell GBSC
IPO GEXT3GCELL
Parameter Id

UMTS to GSM ADD

DIVERSITY Diversity GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

UTRANCELLTYPE Utran Cell Type GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

OPNAME Operator Name GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

RA Route Area GBSC
IPO GEXT3GCELL

UMTS to GSM ADD

IDTYPE Index Type GBSC
IPO G3GNCELL

UMTS to GSM ADD Source Cell

SRC3GNCELLID GBSC
IPO G3GNCELL Index

UMTS to GSM ADD Neighbor Cell

NBR3GNCELLID GBSC
IPO G3GNCELL Index

UMTS to GSM ADD Neighboring Cell

NCELLPRI GBSC
IPO G3GNCELL Priority

UMTS to GSM RMV

IDTYPE Index Type GBSC
IPO G3GNCELL

UMTS to GSM RMV Source Cell

SRC3GNCELLID GBSC
IPO G3GNCELL Index

UMTS to GSM RMV Neighbor Cell

NBR3GNCELLID GBSC
IPO G3GNCELL Index

08/24/2023 华为保密信息,未经授权禁止扩散 第297页，共633页

 686970386.xls 文档密级

Operation
Version MAE Value Range and Unit
Description
Add the basic
information of
the GSM, GUI Value Range: 0 to 65535
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM,
RAN16.0 and later NA
GPRS, or
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, Default Value: 0
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, Default Value: OFF
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, GUI Value Range: 3 characters
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of GUI Value Range: 2 to 3
the GSM,
RAN16.0 and later characters
GPRS, or
Add thecell
basic Unit: None
EDGE to
information
the RNC. of
the GSM, GUI Value Range: 0 to 31
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of GUI Value Range: 0 to
the GSM,
RAN16.0 and later 65533,65535
GPRS, or
Add thecell
basic Unit: None
EDGE to
information
the RNC. of
the GSM, GUI Value Range: 0 to 255
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, GUI Value Range: 0 to 65535
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, GUI Value Range: 0 to 7
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, GUI Value Range: 0 to 7
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM,
RAN16.0 and later NA
GPRS, or
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM,
RAN16.0 and later NA
GPRS, or
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM, Default Value: GPRS
RAN16.0 and later
GPRS, or Unit: None
Add
EDGE thecell
basic
to
information
the RNC. of
the GSM,
RAN16.0 and later NA
GPRS, or
EDGE cell to
the RNC.

08/24/2023 华为保密信息,未经授权禁止扩散 第298页，共633页

 Use this
command to
add a
neighboring 686970386.xls 文档密级
Use
GSMthis cell for
command
a UMTS cell. to
add a
After this
neighboring
command is GUI Value Range: 0 to 4095
RAN16.0 and later Use
GSM this
cell for
executed,
command the
to Unit: None
a UMTS
added cell.
GSM
add
After athis
cell becomes
neighboring
command
Use this
a neighboring is GUI Value Range: 0 to 65535
RAN16.0 and later GSM cell for
executed,
command
cell
a to Unit: None
the
of thecell.
UMTS
added
add
UMTS GSM
athis
cell.
After
cell becomes
neighboring
command is GUI Value Range: 0 to 65535
RAN16.0 and later Use
GSM this
a neighboring
cell for
executed,
command
cell the
to Unit: None
of thecell.
a UMTS
added GSM
add
UMTS athis
UMTS
cell.
Afterbecomes
cell under
command the
RAN16.0 and later Use this is Default Value: SONOPTI
a neighboring
neighboring
executed,
command the the
cell of This to Unit: None
RNC.
added GSM
add
UMTS a UMTS
command cell.is
cell becomes
under the
applicable
Use this to GUI Value Range: 0 to 4095
a neighboring
RAN16.0 and later neighboring
the
cell scenarios
command the to Unit: None
of This
RNC.
such as the
add
UMTS a UMTS
command cell.is
inter-Iur
cell under intra-
the
applicable
Use this
frequency to GUI Value Range: 0 to 65535
RAN16.0 and later neighboring
the scenarios
command
handover or Unit: None
to
RNC.
such This
as the
add
inter-a UMTS
command is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to GUI Value Range: 0 to 31
RAN16.0 and later neighboring
handover.
the scenarios
command
handover or Unit: None
to
RNC.
such This
as the
add
inter-a UMTS
command is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover orto
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the GUI Value Range: 0 to
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. 65533,65535
the scenarios
command
handover orto Unit: None
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell intra-
frequency the
under
applicable
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
handover or
RNC.
such This
as the
inter-
command is
inter-Iur
frequency intra-
applicable
frequency to GUI Value Range: 0 to 255
RAN16.0 and later handover.
handover or Unit: None
the scenarios
such
inter- as the
inter-Iur
frequency intra-
frequency
handover.
handover or
inter-
08/24/2023 华为保密信息,未经授权禁止扩散
frequency 第299页，共633页
handover.
 Use this
command to
add a UMTS
cell under the 686970386.xls 文档密级
Use this
neighboring
command
RNC. This to
add a UMTS
command is
cell under
applicable the
to
RAN16.0 and later Use this
neighboring NA
the scenarios
command to
RNC.
such This
add aas
command
the
UMTS is
inter-Iur
cell under intra-
the
applicable
frequency to NA
Use this
RAN16.0 and later neighboring
the scenarios
command
handover to
or
RNC.
such This
as the
add
inter-a
command UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell intra-
frequency the
under
applicable
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
handover or
RNC.
such This
as the
inter-
command is
inter-Iur
frequency intra-
applicable
frequency to
RAN16.0 and later handover. NA
the scenarios
handover or
such
inter- as the
inter-Iur
frequency intra-
frequency
handover.
handover or
inter-
08/24/2023 华为保密信息,未经授权禁止扩散
frequency 第300页，共633页
handover.
 Use this
command to
add a UMTS
cell under the 686970386.xls 文档密级
Use this
neighboring
command
RNC. This to
add a UMTS
command is
cell under
applicable the
to
RAN16.0 and later Use this
neighboring NA
the scenarios
command to
RNC.
such This
add aas
command
the
UMTS is
inter-Iur
cell under intra-
the
applicable
frequency to
Use this
RAN16.0 and later neighboring NA
the scenarios
command
handover to
or
RNC.
such This
as the
add
inter-a
command UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
Use this
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
command
handover to
or
RNC.
such This
add
inter-aas
command
the
UMTS is
inter-Iur
cell under
frequency intra-
the
applicable
frequency to
RAN16.0 and later neighboring
handover. NA
the scenarios
handover or
RNC.
such This
as the
inter-
command is
inter-Iur
frequency intra-
applicable
frequency to
RAN16.0 and later handover. NA
the scenarios
handover or
Use
such this
as the
inter-
command to
inter-Iur
frequency intra-
add an
frequency intra- GUI Value Range: 0 to 4095
RAN16.0 and later handover.
frequency
handover Unit: None
Use this or
neighboring
inter-
command to
cell.
frequency
add an intra- GUI Value Range: 0 to 65535
RAN16.0 and later handover.
frequency Unit: None
neighboring
cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第301页，共633页

 686970386.xls 文档密级
Use this
command to
add an intra- GUI Value Range: 0 to 65535
RAN16.0 and later
frequency Unit: None
Use this
neighboring
command
cell. to
add an intra- GUI Value Range: 0 to 65535
RAN16.0 and later
frequency Unit: None
Use this
neighboring
command
cell. to
add an intra- Value Range: -50 to 50
RAN16.0 and later
frequency Unit: dB
Use this
neighboring
command
cell. to
add an intra- Value Range: -50 to 50
RAN16.0 and later
frequency Unit: dB
Use this
neighboring
command
cell. to
add an intra- Default Value: SONOPTI
RAN16.0 and later Use this
frequency Unit: None
command
neighboring to
add
cell. an inter-
frequency GUI Value Range: 0 to 4095
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency GUI Value Range: 0 to 65535
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency GUI Value Range: 0 to 65535
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency GUI Value Range: 0 to 65535
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -20 to 20
RAN16.0 and later Use this
neighboring Unit: 0.5dB
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -50 to 50
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
frequency Value Range: -50 to 50
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -50 to 50
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
frequency Value Range: -50 to 50
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
Value Range: D0, D10, D20,
frequency
RAN16.0 and later D30, D40, D50, D60
neighboring
Unit: s
cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第302页，共633页

 686970386.xls 文档密级
Use this
command to
add an inter-
frequency Value Range: 0 to 3
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -115 to -25
RAN16.0 and later Use this
neighboring Unit: dBm
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: 0~63
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -24 to 0
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: -24 to 0
RAN16.0 and later Use this
neighboring Unit: dB
command
cell. to
add an inter-
frequency Value Range: -58 to -13
RAN16.0 and later Use this
neighboring Unit: 2dBm
command
cell. to
add an inter-
frequency Value Range: FALSE, TRUE
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency Value Range: 0 to 15
RAN16.0 and later Use this
neighboring Unit: None
command
cell. to
add an inter-
frequency
Use this Default Value: SONOPTI
RAN16.0 and later
neighboring
command to Unit: None
cell. an LTE
add
cell that is
Use this GUI Value Range: 0 to 65535
RAN16.0 and later neighboring
command Unit: None
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
RAN16.0 and later Use this
neighboring NA
area.
command
to the edgetoof
add an LTE
the UMTS
cell
coverageis
that GUI Value Range: 0 to
RAN16.0 and later neighboring
area. 268435455
to the edge of Unit: None
the UMTS
coverage
area.

08/24/2023 华为保密信息,未经授权禁止扩散 第303页，共633页

 Use this 686970386.xls 文档密级
command to
add an LTE
cell that is
Use this Value Range: 3 characters
RAN16.0 and later neighboring
command Unit: None
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
Use this Value Range: 2 to 3 characters
RAN16.0 and later neighboring
area.
command Unit: None
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
Use this GUI Value Range: 0 to 65535
RAN16.0 and later neighboring
area.
command Unit: None
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
Use this GUI Value Range: 0 to 31
RAN16.0 and later neighboring
area.
command Unit: None
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
RAN16.0 and later Use this
neighboring NA
area.
command
to the edgetoof
add an LTE
the UMTS
cell that
coverage is
RAN16.0 and later Use this
neighboring NA
area.
command
to the edgetoof
add an LTE
the UMTS
cell
coverageis
that
RAN16.0 and later neighboring
area. NA
to the edge of
Use this
the UMTS
command
coverage to GUI Value Range: 0 to 4095
RAN16.0 and later add
area. Unit: None
neighboring
Use
LTE this
cell.
command to
GUI Value Range: 0 to 65535
RAN16.0 and later add
Unit: None
neighboring
Use
LTE this
cell.
command to
GUI Value Range: 0 to 65535
RAN16.0 and later add
Unit: None
neighboring
Use
LTE this
cell.
command to
Default Value: SONOPTI
RAN16.0 and later add
Unit: None
neighboring
LTE cell.
Remove
GUI Value Range: 0 to 4095
RAN16.0 and later neighboring
Unit: None
GSM cell.
Remove
GUI Value Range: 0 to 65535
RAN16.0 and later neighboring
Unit: None
GSM cell.
Remove
GUI Value Range: 0 to 65535
RAN16.0 and later neighboring
Use Unit: None
GSMthiscell.
command to
remove an
GUI Value Range: 0 to 4095
RAN16.0 and later intra-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 65535
RAN16.0 and later intra-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 65535
RAN16.0 and later intra-
Unit: None
frequency
neighboring
cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第304页，共633页

 686970386.xls 文档密级
Use this
command to
remove an
GUI Value Range: 0 to 65535
RAN16.0 and later intra-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 4095
RAN16.0 and later inter-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 65535
RAN16.0 and later inter-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 65535
RAN16.0 and later inter-
Use this Unit: None
frequency
command
neighboring to
remove
cell. an
GUI Value Range: 0 to 65535
RAN16.0 and later inter-this
Use Unit: None
frequency to
command
Modify the
neighboring
remove a
basic
cell.
neighboring GUI Value Range: 0 to 4095
RAN16.0 and later Use
LTE this
information
cell of aof Unit: None
command
a cell, cell to
UMTS
Modify
remove the
including
under
basic ana Max
neighboring
transmit
RNC. GUI Value Range: 0 to 65535
RAN16.0 and later Use this
information
LTE
power cell
of of aof
cell, Unit: None
command
a cell,
UMTS cell to
Num
remove of
under ana Max
including
continuous in
neighboring
transmit
RNC.ind, GUI Value Range: 0 to 65535
RAN16.0 and later sync
LTE
power cell of a Unit: None
Num
UMTS ofof cell,
cell
Num of
continuous
under an in
continuous
out
RNC. of sync GUI Value Range: 0 to 65535
RAN17.1 and later sync ind, link
ind, Radio Unit: None
Num
failureoftimer
continuous
Length, and
out
the of sync
transmit Value Range: FALSE, TRUE
RAN17.1 and later
ind, Radio
power of the link Unit: None
failure
downlink timer
Length,
common and
Modify
the 3G
transmit GUI Value Range: 5048 to 15287
GBSS16.0 and later channelsCell
External
power Unit: None
such asof the
downlink
PSCH,
common
Modify
SSCH, 3G Default Value: BYID
GBSS16.0 and later channels
External
PCPICH Cell and Unit: None
such
BCH.as
PSCH,
Modify 3G
SSCH, Value Range: 0 to 511
GBSS16.0 and later
External
PCPICH Cell and Unit: None
BCH.
Modify Cell
GUI Value Range: 0 to 65535
RAN16.0 and later Basic
Unit: None
Information
Modify
Value Range: 0 to 511
RAN16.0 and later Neighboring
Unit: None
RNC Cell
Modify
RAN16.0 and later Neighboring NA
RNC Cell
Modify
GUI Value Range: 0 to 65535
RAN16.0 and later Neighboring
Unit: None
RNC Cell

08/24/2023 华为保密信息,未经授权禁止扩散 第305页，共633页

 686970386.xls 文档密级

Modify
GUI Value Range: 0 to 65535
RAN16.0 and later Neighboring
Unit: None
RNC Cell
Modify
Value Range: 0 to 511
RAN16.0 and later Neighboring
Unit: None
RNC Cell
Modify
Value Range: 3 characters
eRAN7.0 and later External
Unit: None
UTRAN Cell
Modify
Value Range: 2 to 3 characters
eRAN7.0 and later External
Unit: None
UTRAN Cell
Modify
Value Range: 0 to 511
eRAN7.0 and later External
Unit: None
UTRAN Cell
Modify
GUI Value Range: 0 to 4095
eRAN7.0 and later External
Unit: None
UTRAN Cell
Modify
GUI Value Range: 0 to 65535
eRAN7.0 and later External
Unit: None
UTRAN Cell
Activate the
configuration
data of a cell GUI Value Range: 0 to 65535
RAN16.0 and later
and
Use make
this Unit: None
them
command to
available. a
deactivate
GUI Value Range: 0 to 65535
RAN16.0 and later cell, and
Unit: None
make the cell
data this
Use GUI Value Range: BSC6900:
unavaliable.
command to 5048 to 15287; BSC6910: 0 to
GBSS16.0 and later
add a 3G 19999
external cell. Unit: None
Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.
Use this
command to GUI Value Range: 3 characters
GBSS16.0 and later
add a 3G Unit: None
external cell.
Use this
GUI Value Range: 2 to 3
command to
GBSS16.0 and later characters
add a 3G
Unit: None
external cell.
Use this
GUI Value Range: 0 to
command to
GBSS16.0 and later 65533,65535
add a 3G
Unit: None
external cell.
Use this
command to GUI Value Range: 0 to 65535
GBSS16.0 and later
add a 3G Unit: None
external cell.
Use this
command to GUI Value Range: 0 to 4095
GBSS16.0 and later
add a 3G Unit: None
external cell.
Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第306页，共633页

 686970386.xls 文档密级

Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.
Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.
Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.
Use this
command to
GBSS16.0 and later NA
add a 3G
external cell.
Use this
command to GUI Value Range: 0 to 255
GBSS16.0 and later
add a 3G Unit: None
external
Use this cell.
command to
Default Value: BYID
GBSS16.0 and later add a 3G
Unit: None
neighboring
Use
cell. this
command to
GUI Value Range: 0 to 2047
GBSS16.0 and later add a 3G
Unit: None
neighboring
Use
cell. this
command to
GUI Value Range: 5048 to 15287
GBSS16.0 and later add a 3G
Unit: None
neighboring
Use
cell. this
command to
GBSS16.0 and later add a 3G NA
Use this
neighboring
command
cell. to
remove the
Default Value: BYID
GBSS16.0 and later information
Use Unit: None
aboutthis
3G
command
neighboring to
remove
cells. the
GUI Value Range: 0 to 7999
GBSS16.0 and later information
Use Unit: None
aboutthis
3G
command
neighboring to
remove
cells. the
GUI Value Range: 5048 to 15287
GBSS16.0 and later information
Unit: None
about 3G
neighboring
cells.

08/24/2023 华为保密信息,未经授权禁止扩散 第307页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
Fixed-value parameters:
obtains the values of theseincludes the
parameters
parameters
from NEs. for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the on
parameters for which the MAE provides
the objects that are filtered according to
built-in
algorithmdefault values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
Fixed-value parameters:
obtains the values of theseincludes the
parameters
parameters
from NEs. for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Non-MAE-optimized parameters:
the objects that are filtered include
according to
the non-identity-related
algorithm requirements. parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第308页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the MAE
the values of these parameters. provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第309页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters: include

the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第310页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters: include

the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第311页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters:
and the valueincludes
range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
parameter on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第312页，共633页

 686970386.xls 文档密级

Range-value parameters: include the

parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Range-value
parameter onparameters:
the MAE client include
or onthe
NEs.
parameters for which the MAE calculates
optimization values according to algorithm
Fixed-value
requirementsparameters:
and the valueincludes
range the
of each
parameters
parameter on the MAE client orprovides
for which the MAE on NEs.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第313页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the MAE
the values of these parameters. provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第314页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters. include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the MAE
the values of these parameters. provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Range-value parameters:
the objects that are filteredinclude the to
according
parameters for which
algorithm requirements. the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Non-MAE-optimized
parameter on the MAE parameters:
client or oninclude
NEs.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第315页，共633页

 686970386.xls 文档密级

Identity-related parameters: include

parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Range-value
the values of parameters: include the
these parameters.
parameters for which the MAE calculates
optimization values according to algorithm
requirements and the value range of each
Identity-related
parameter on the parameters:
MAE clientinclude
or on NEs.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第316页，共633页

 686970386.xls 文档密级

Non-MAE-optimized parameters: include

the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
the MAE does not optimize. The MAE
obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
Fixed-value
parameters. parameters:
The MAE does includes the
not optimize
parameters for which the MAE
the values of these parameters. provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
the MAE does not optimize. The MAE
Fixed-value parameters:
obtains the values of theseincludes the
parameters
parameters
from NEs. for which the MAE provides
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these parameters based on
Identity-related
the objects that parameters: include to
are filtered according
parameters such as
algorithm requirements.CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
Identity-related parameters:
the values of these parameters.include
parameters such as CellId, IDTYPE, MCC,
and the MOC primary key and foreign key
parameters. The MAE does not optimize
the values of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第317页，共633页

 Optimization Type MML Command Parameter

NR-to-NR Intra-Frequency ADD

Mcc
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

Mnc
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

gNBId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

CellId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

PhysicalCellId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

RanNotificationAreaId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

Tac
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

SsbDescMethod
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency ADD

SsbFreqPos
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency RMV

Mcc
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency RMV

Mnc
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency RMV

gNBId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency RMV

CellId
Neighboring Cell Planning NREXTERNALNCELL

NR-to-NR Intra-Frequency
ADD NRCELLRELATION NrCellId
Neighboring Cell Planning

NR-to-NR Intra-Frequency
ADD NRCELLRELATION Mcc
Neighboring Cell Planning

NR-to-NR Intra-Frequency
ADD NRCELLRELATION Mnc
Neighboring Cell Planning

NR-to-NR Intra-Frequency
ADD NRCELLRELATION gNBId
Neighboring Cell Planning
NR-to-NR Intra-Frequency
ADD NRCELLRELATION CellId
Neighboring Cell Planning

NR-to-NR Intra-Frequency
RMV NRCELLRELATION NrCellId
Neighboring Cell Planning

NR-to-NR Intra-Frequency
RMV NRCELLRELATION Mcc
Neighboring Cell Planning

NR-to-NR Intra-Frequency
RMV NRCELLRELATION Mnc
Neighboring Cell Planning

NR-to-NR Intra-Frequency
RMV NRCELLRELATION gNBId
Neighboring Cell Planning

NR-to-NR Intra-Frequency
RMV NRCELLRELATION CellId
Neighboring Cell Planning

LTE-to-NR Intra-Frequency
ADD NREXTERNALCELL Mcc
Neighboring Cell Planning

LTE-to-NR Intra-Frequency ADD

Mnc
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency ADD

GnodebId
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency ADD

CellId
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency ADD

DlArfcn
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency ADD

PhyCellId
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency ADD

Tac
Neighboring Cell Planning NREXTERNALNCELL

LTE-to-NR Intra-Frequency
RMV NREXTERNALCELL Mcc
Neighboring Cell Planning

LTE-to-NR Intra-Frequency
RMV NREXTERNALCELL Mnc
Neighboring Cell Planning

LTE-to-NR Intra-Frequency
RMV NREXTERNALCELL GnodebId
Neighboring Cell Planning

LTE-to-NR Intra-Frequency
RMV NREXTERNALCELL CellId
Neighboring Cell Planning

LTE-to-NR Intra-Frequency ADD

LocalCellId
Neighboring Cell Planning NRNRELATIONSHIP
LTE-to-NR Intra-Frequency ADD
Mcc
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency ADD

Mnc
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency ADD

GnodebId
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency ADD

CellId
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency RMV

LocalCellId
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency RMV

Mcc
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency RMV

Mnc
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency RMV

GnodebId
Neighboring Cell Planning NRNRELATIONSHIP

LTE-to-NR Intra-Frequency RMV

CellId
Neighboring Cell Planning NRNRELATIONSHIP

PCI Planning MOD NRDUCELL NrDuCellId

PCI Planning MOD NRDUCELL CellId

PCI Planning MOD NRDUCELL PhysicalCellId

MOD
PCI Planning Mcc
NREXTERNALNCELL

MOD
PCI Planning Mnc
NREXTERNALNCELL

MOD
PCI Planning gNBId
NREXTERNALNCELL

MOD
PCI Planning CellId
NREXTERNALNCELL

MOD
PCI Planning PhysicalCellId
NREXTERNALNCELL

MOD
PCI Planning RanNotificationAreaId
NREXTERNALNCELL
 MOD
PCI Planning Tac
NREXTERNALNCELL

MOD
PCI Planning Mcc
NREXTERNALCELL

MOD
PCI Planning Mnc
NREXTERNALNCELL

MOD
PCI Planning GnodebId
NREXTERNALNCELL

MOD
PCI Planning CellId
NREXTERNALNCELL

MOD
PCI Planning DlArfcn
NREXTERNALNCELL

MOD
PCI Planning PhyCellId
NREXTERNALNCELL

MOD
PCI Planning Tac
NREXTERNALNCELL

LogicalRootSequenceI
PRACH RSI Planning MOD NRDUCELL
ndex

PRACH RSI Planning MOD NRDUCELL PrachFreqStartPosition

 Operation
Parameter
Indicates the MCC Description
of the operator NE Version
Description
who owns an external
Use this
neighboring NR cell. The MCC,
command to add
together with the MNC, forms the
Indicates theMCC
MNCisofa the operator gNodeB 5G RAN2.1 an external
PLMN. The string of
who owns an external neighboring NR
three decimal digits, and the MNC Use
neighboring cell. this
is a string of NR
twocell. The decimal
to three MNC,
command to add
together
digits. with the MCC, forms the
gNodeB 5G RAN2.1 an external
PLMN. The MCC is a string of
neighboring NR
three decimal digits, and the MNC Use
Indicates cell. this
is a stringthe gNodeB
of two ID of
to three an
decimal command to add
external
digits. neighboring NR cell. It
gNodeB 5G RAN2.1 an external
uniquely identifies a gNodeB
neighboring NR
within a PLMN. Use
Indicates the cell ID of an cell. this
command to add
external neighboring NR cell. It
gNodeB 5G RAN2.1 an external
uniquely identifies an NR cell
neighboring NR
within a gNodeB. Use
cell. this
command to add
Indicates the physical
TAC of acell ID of gNodeB 5G RAN2.1 an external
an
neighboring cell, which isNR
external neighboring cell.by
used neighboring NR
Indicates
the the RANtonotification
core network determine the Use
cell. this
ID of an
area within external
which paging command to add
neighboringare
messages cell. ThisOne
sent. parameter
tracking gNodeB 5G RAN2.1 an external
is invalid
area when being
is composed set to
of one or more neighboring NR
65535. Use
cell. this
cells. TACs do not need to be
command to add
planned when the external
Indicates thecell
frequency domain gNodeB 5G RAN2.1 an external
neighboring is an NSA cell.
location of the cell SSB. When neighboring NR
You are advised to set this Use
SsbDescMethod is set to cell. this
parameterthe
Indicates to an invalid
description value
method command to add
SSB_DESC_TYPE_GSCN(Globa
(4294967295).
of the SSB frequency TACs mustdomain be gNodeB 5G RAN2.1 an external
lplanned
Synchronization
position when
of theChannel
a cell. external neighboring NR
Number),
neighboring thiscell
parameter
is an SA indicates
or Use
cell. this
the global synchronization
SA_NSA cell and cannot be set command to add
channel
Indicates number
thevalue.
to an invalid MCC corresponding
of the operator to gNodeB 5G RAN2.1 an external
the cell
who ownsSSB.an When
external neighboring NR
SsbDescMethod is set to MCC, Use
cell. this
neighboring NR cell. The
SSB_DESC_TYPE_NARFCN(Ab command to
together with the MNC, forms the
Indicates theMCCMNCisof gNodeB 5G RAN2.1 delete an external
solute Frequency),
PLMN. The a the
this operator
parameter
string of
who owns
indicates an external
the absolute frequency neighboring NR
three decimal digits, and the MNC Use
neighboring cell. this
number
is a string of NR
twocell.
corresponding The
to three MNC,
to decimal
the cell command to
together
SSB.
digits. with the MCC, forms the
gNodeB 5G RAN2.1 delete an external
PLMN. The MCC is a string of
neighboring NR
three decimal digits, and the MNC Use
Indicates cell. this
is a stringthe gNodeB
of two ID of
to three an
decimal command to
external
digits. neighboring NR cell. It gNodeB 5G RAN2.1 delete an external
uniquely identifies a gNodeB
neighboring NR
within a PLMN. Use
Indicates the cell ID of an cell. this
command to
external neighboring NR cell. It
gNodeB 5G RAN2.1 delete an external
uniquely identifies an NR cell
neighboring NR
within a gNodeB.
cell. this
Use
Indicates the ID of an NR cell,
command to add
which uniquely identifies the NR gNodeB 5G RAN2.1
Indicates a neighboring NR
cell withinthe MCC of the operator
a gNodeB.
who owns a neighboring NR cell. cell.
Use this
The MCC, together with the MNC,
command to add
forms the PLMN. The MCC is a gNodeB 5G RAN2.1
Indicates the MNC of the operator a neighboring NR
string of three decimal digits, and
who cell.
the MNC is a string of two to cell.
owns a neighboring NR
Use this
The
threeMNC,
decimaltogether
digits.with the MCC, command to add
forms the PLMN. The MCC is a gNodeB 5G RAN2.1
a neighboring NR
string of three decimal digits, and
cell.
the MNC is
Indicates thea gNodeB
string of ID twooftoa Use this
three decimalNR
neighboring digits.
cell. It uniquely command to add
gNodeB 5G RAN2.1
identifies a gNodeB within a a neighboring NR
PLMN. cell.
Indicates the cell ID of a Use this
neighboring NR cell. It uniquely command to add
gNodeB 5G RAN2.1
identifies an NR cell within a a neighboring NR
gNodeB. cell. this
Use
Indicates the ID of an NR cell, command to
which uniquely identifies the NR gNodeB 5G RAN2.1 remove a
Indicates
cell withinthe MCC of the operator
a gNodeB. neighboring NR
who owns a neighboring NR cell. Use
cell. this
The MCC, together with the MNC, command to
forms the PLMN. The MCC is a gNodeB 5G RAN2.1 remove a
Indicates the MNC
string of three of the
decimal operator
digits, and neighboring NR
who
the MNC is a string of two to cell.
owns a neighboring NR Use
cell. this
The
threeMNC, together
decimal digits.with the MCC, command to
forms the PLMN. The MCC is a gNodeB 5G RAN2.1 remove a
string of three decimal digits, and neighboring NR
the MNC is Use
cell. this
Indicates thea gNodeB
string of IDtwooftoa
three decimalNR digits. command to
neighboring cell. It uniquely
gNodeB 5G RAN2.1 remove a
identifies a gNodeB within a
neighboring NR
PLMN. Use
Indicates the cell ID of a cell. this
command to
neighboring NR cell. It uniquely
Indicates theNRMCC gNodeB 5G RAN2.1 remove a
identifies an cellofwithin
the operator
a
who owns an external neighboring NR
gNodeB. Use
neighboring NR cell. The MCC, cell. this
command to add
together with the MNC, forms the
Indicates theMCC
MNCisofa the operator eNodeB eRAN15.1 an external
PLMN. The string of
who owns an external neighboring NR
three decimal digits, and the MNC Use
neighboring cell. this
is a string of NR
twocell. The decimal
to three MNC,
command to add
together
digits. with the MCC, forms the
eNodeB eRAN15.1 an external
PLMN. The MCC is a string of
neighboring NR
three decimal digits, and the MNC Use
cell. this
is a string of two to three decimal command to add
digits.
gNodeB ID eNodeB eRAN15.1 an external
neighboring NR
Use
cell. this
Indicates the cell ID of an
command to add
external neighboring NR cell. It
eNodeB eRAN15.1 an external
uniquely identifies an NR cell
neighboring NR
within a gNodeB. Use
cell. this
command to add
Indicates
Downlink theARFCNTAC of a eNodeB eRAN15.1 an external
neighboring cell, which is used by neighboring NR
the core network to determine the Use
cell. this
area within which paging command to add
Indicates the physical cell ID of
messages are sent. OneNR tracking eNodeB eRAN15.1 an external
an external neighboring cell.
area is composed of one or more neighboring NR
Use
cell. this
cells. TACs do not need to be
command to add
planned when the external
Indicates thecell
MCC of the eNodeB eRAN15.1 an external
neighboring is an NSAoperator
cell.
who owns an external neighboring NR
You are advised to set this Use
neighboring cell. this
parameter toNR an cell.
invalidThe MCC,
value command to
together with
(4294967295). the
TACsMNC, formsbe the
Indicates
PLMN. ThetheMCC
MNC ofa must
the operator eNodeB eRAN15.1 delete an external
planned
who when the external of
is string
neighboring NR
threeowns an external
decimal digits,
is anandSA the
or MNC Use
neighboring cell cell.
NR The MNC, cell. this
is a string
SA_NSAwith of two
cell and to three decimal
cannotformsbe set command to
together
digits. the MCC, the
to an invalid value.is a string of eNodeB eRAN15.1 delete an external
PLMN. The MCC
neighboring NR
three decimal digits, and the MNC Use
cell. this
is a string of two to three decimal command to
digits.
gNodeB ID eNodeB eRAN15.1 delete an external
neighboring NR
Use
cell. this
Indicates the cell ID of an
command to
external neighboring NR cell. It
eNodeB eRAN15.1 delete an external
uniquely identifies an NR cell
neighboring NR
within a gNodeB.
cell.
Use this comman
d to add an NR n
Local cell ID eNodeB eRAN15.1
eighbor cell relati
onship.
Indicates the MCC of the operator
who owns an external
neighboring NR cell. The MCC, Use this comman
together with the MNC, forms the d to add an NR n
Indicates theMCC
MNCisofa the operator eNodeB eRAN15.1
PLMN. The string of eighbor cell relati
who owns an external
three decimal digits, and the MNC onship.
neighboring
is a string of NR
twocell. The decimal
to three MNC, Use this comman
together
digits. with the MCC, forms the d to add an NR n
eNodeB eRAN15.1
PLMN. The MCC is a string of eighbor cell relati
three decimal digits, and the MNC onship.
is a string of two to three decimal Use this comman
digits. d to add an NR n
gNodeB ID eNodeB eRAN15.1
eighbor cell relati
onship.
Indicates the cell ID of an Use this comman
external neighboring NR cell. It d to add an NR n
eNodeB eRAN15.1
uniquely identifies an NR cell eighbor cell relati
within a gNodeB. onship.
Use this comman
d to remove an N
Local cell the
Indicates ID MCC of the operator eNodeB eRAN15.1
R neighbor relatio
who owns an external nship.
neighboring NR cell. The MCC, Use this comman
together with the MNC, forms the d to remove an N
Indicates theMCC
MNCisofa the operator eNodeB eRAN15.1
PLMN. The string of R neighbor relatio
who owns an external
three decimal digits, and the MNC nship.
neighboring
is a string of NR
twocell. The decimal
to three MNC, Use this comman
together
digits. with the MCC, forms the d to remove an N
eNodeB eRAN15.1
PLMN. The MCC is a string of R neighbor relatio
three decimal digits, and the MNC nship.
is a string of two to three decimal Use this comman
digits. d to remove an N
gNodeB ID eNodeB eRAN15.1
R neighbor relatio
nship.
Indicates the cell ID of an Use this comman
external neighboring NR cell. It d to remove an N
eNodeB eRAN15.1
uniquely identifies an NR cell R neighbor relatio
within a gNodeB. nship.
Indicates the ID of an NR DU Use this
gNode
cell. It uniquely
Indicates the IDidentifies
of an NRan cell. 5G RAN2.1 command to
B
NR DU cell within
This cell ID and the a gNodeB
gNodeB.ID change the PCI.
compose the 3GPP-defined Use this
gNode
NR cell ID. The 3GPP-defined 5G RAN2.1 command to
B
NR cell ID and the PLMN ID change the PCI.
compose
Indicates thethe physical
NR CGI. cell For ID. Use this
details, see 3GPP TS 38.413. gNode
For details,
Indicates thesee
MCC 3GPP
of theTS 5G RAN2.1 command to
B
38.331.
operator who owns an external change
Use thisthe PCI.
NR cell. The MCC, together command to
Indicates the MNC ofthe
the gNode
with the MNC, forms 5G RAN2.1 modify external
operator who owns a B
PLMN. The MCC consists of neighboring
Use this NR
neighboring
three digits. TheNR cell.
MNCThe consists cells.
command to
MCC,
of two or three digits.the MNC,
together with gNode
5G RAN2.1 modify external
forms the PLMN. The MCC B
neighboring
Use this NR
consists
Indicatesofthe three digits.IDThe
gNodeB of an cells.
command to
MNC consists of
external neighboring NRtwo or three
cell. It gNode
digits. identifies a gNodeB 5G RAN2.1 modify external
uniquely B
neighboring
Use this NR
within
Indicatesa PLMN.
the cell ID of an cells.
command to
external neighboring NR cell. It gNode
5G RAN2.1 modify external
uniquely identifies an NR cell B
neighboring
Use this NR
within a gNodeB.
Indicates the physical cell ID of cells.
command to
gNode
an external neighboring NR 5G RAN2.1 modify external
Indicates the ID of the RAN- B
cell. neighboring
Use this NR
based Notification Area (RNA) cells.
command to
of an external neighboring cell. gNode
5G RAN2.1 modify external
If RanNotificationAreaId is set B
neighboring NR
to 65535, the parameter value is
invalid.
cells.
by the core network to
determine the area within
which paging messages are
sent. One tracking area is
composed of one or more Use this
cells. TACs do not need to be command to
Indicates the MCC of the gNode
planned when the external 5G RAN2.1 modify external
operator who owns a NSA B
neighboring cell is an neighboring NR
neighboring
cell. You are advisedThe
NR cell. to set Use
cells.this
MCC, together
this parameter
Indicates the MNCwith
to anofthe MNC,
invalid
the eNode command to
eRAN15.1
forms the PLMN.
value (4294967295).
operator The
who owns a TACs MCC B modify external
consists of three
neighboring
must be planned digits.
NR cell.
when The The
the NR cells.
Use this
MNC
MCC, consists
externaltogether ofwith
neighboring twothe or MNC,
cellthree
is an eNode command to
digits. eRAN15.1
forms the PLMN. The
SA or SA_NSA cell and cannot MCC B modify external
consists
be set to of
anthree
invaliddigits.
value. The NR cells.
Use this
MNC consists of two or three eNode command to
gNodeB
digits. ID eRAN15.1
B modify external
Indicates the cell ID of an NR cells.
Use this
external neighboring NR cell. It eNode command to
eRAN15.1
uniquely identifies an NR cell B modify external
within a gNodeB.
Indicates the TAC of a NR cells.
Use this
neighboring cell, which is used eNode command to
Downlink ARFCN eRAN15.1
by the core network to B modify external
determine the area within NR
Usecells.
this
Indicates the physical
which paging messages cellare
ID of
eNode command to
an external neighboring
sent. One tracking area is NR eRAN15.1
Indicates the starting B modify external
cell.
composed of one or more
frequency-domain position of NR
Usecells.
this
Indicates
cells. TACsthedofirst
notlogical
need to root
be
the PRACH.
sequence For
index, details, see eNode command to
planned when thewhich
externalis used eRAN15.1
3GPP
to TS 38.321.
generate the The values B modify external
neighboring cellcell
is anpreamble
NSA Use this
0 to 272
sequence. indicate
Each that
logicalthe NR cells.
cell. You are advised to root
set command to
starting
sequence frequency-domain
corresponds to a gNode
this parameter to an invalid 5G RAN2.1 modify
position
physical of
rootthesequence.
PRACH equals For B Use thisthe
value (4294967295). TACs logical rootto
the
the parameter
mapping value. The
between logical command
must be planned when the sequence
value
root 65535 indicates
sequences that the
and physical modify theindex.
external neighboring cell is an gNode
starting
root frequency-domain 5G RAN2.1 PRACH
SA orsequences,
SA_NSA cell seeand3GPP TS
cannot B
position
38.211. of the PRACH is frequency-
be set to invalid values.
automatically generated. This domain start
parameter does not take effect position.
when the LTE FDD and NR
Uplink Spectrum Sharing
feature is enabled on both the
LTE and NR sides and the
uplink spectrum sharing mode
is set to dynamic sharing.
 MAE Value Range and Unit Parameter Value Type
Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
the non-identity-related parameters that
GUI Value Range：0~1007
the MAE does not optimize. The MAE
Unit：None
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
the non-identity-related parameters that
GUI Value Range：0~255,65535
the MAE does not optimize. The MAE
Unit：None
obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
GUI Value Range： the non-identity-related parameters that
0~16777215,4294967295 the MAE does not optimize. The MAE
Unit：None
GUI Value Range： obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
SSB_DESC_TYPE_NARFCN(绝
the non-identity-related parameters that
对频点),
the MAE does not optimize. The MAE
SSB_DESC_TYPE_GSCN(全局
GUI Value Range： obtains the values of these parameters
同步信道号)
2~26639,123400~130400,15160 Non-MAE-optimized parameters: include
from NEs.
Unit：None
0~160600,361000~376000,4992 the non-identity-related parameters that
00~537999,620000~680000,693 the MAE does not optimize. The MAE
334~733333,2016667~2104165, obtains the values of these parameters
2229167~2279165 Identity-related
from NEs. parameters: include
Unit：None parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~65534
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
the values of these parameters.
 Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~65534
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI parameters such as CellId, IDTYPE, MCC,
GUI Value
Value Range：
Range：0~16383
123400~130400,145800~149200 and the MOC primary key and foreign key
Unit：None
,151600~164200,173800~17880 parameters. The MAE does not optimize
Non-MAE-optimized parameters: include
the values of these parameters.
0,185000~192000,285400~3036
the non-identity-related parameters that
00,361000~384000,386000~405
the MAE does not optimize. The MAE
000,422000~440000,460000~48
obtains the values of these parameters
0000,499200~538000,620000~6 Non-MAE-optimized parameters: include
from NEs.
80000,693333~733333,2016667 the non-identity-related parameters that
GUI Value Range：0~1007
~2104166,2229166~2279166 the MAE does not optimize. The MAE
Unit：None
Unit：None obtains the values of these parameters
Non-MAE-optimized
from NEs. parameters: include
GUI Value Range： the non-identity-related parameters that
0~16777215,4294967295 the MAE does not optimize. The MAE
Unit：None obtains the values of these parameters
Identity-related
from NEs. parameters: include
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~255
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
the values of these parameters.
 Identity-related parameters: include
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~255
and the MOC primary key and foreign key
Unit：None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range: 3 characters
and the MOC primary key and foreign key
Unit: None
parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range: 2 to 3 parameters such as CellId, IDTYPE, MCC,
characters and the MOC primary key and foreign key
Unit: None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
GUI Value Range： parameters such as CellId, IDTYPE, MCC,
0~4294967295 and the MOC primary key and foreign key
Unit：None parameters. The MAE does not optimize
Identity-related parameters:
the values of these include
parameters.
parameters such as CellId, IDTYPE, MCC,
GUI Value Range：0~16383
and the MOC primary key and foreign key
Unit：None Identity-related
parameters. The parameters:
MAE does notinclude
optimize
parameters
the values of such
these as CellId, IDTYPE,
parameters.
GUI Value Range: 0~65534 MCC, and the MOC primary key and
Unit: None foreign key parameters.
Identity-related parameters:Theinclude
MAE
does not optimize the values
parameters such as CellId, IDTYPE,of these
GUI Value Range: parameters.
MCC, and the MOC primary key and
0~16383,65535
foreign key parameters.
Range-value parameters:The MAE the
include
Unit: None
does not optimize the values
parameters for which the MAE of these
GUI Value Range: 0~1007 parameters.
calculates optimization values
Unit: None according to algorithm
Identity-related requirements
parameters: include
and the value range of
parameters such as CellId, eachIDTYPE,
parameter
GUI Value Range: 3 on the MAE client or on NEs.
MCC, and the MOC primary key and
characters
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
does not optimize the values
parameters such as CellId, IDTYPE,of these
GUI Value Range: 2 to 3 parameters.
MCC, and the MOC primary key and
characters
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
does not optimize the values
parameters such as CellId, IDTYPE,of these
GUI Value Range: parameters.
MCC, and the MOC primary key and
0~4294967295
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
does not optimize the values
parameters such as CellId, IDTYPE,of these
GUI Value Range: 0~16383 parameters.
MCC, and the MOC primary key and
Unit: None foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize the values
parameters for which the MAE of these
GUI Value Range: 0~1007 parameters.
calculates optimization values
Unit: None according to algorithm requirements
Non-MAE-optimized
and the value range of parameters:
each parameter
GUI Value Range: include the non-identity-related
on the MAE client or on NEs.
0~255,65535 parameters that the MAE does not
Unit: None optimize. The MAE obtains the values
of these parameters from NEs.
 Non-MAE-optimized parameters:
GUI Value Range: include the non-identity-related
0~16777215,4294967295 parameters that the MAE does not
Unit: None Identity-related
optimize. The MAE parameters: include
obtains the values
parameters such as CellId,
of these parameters from NEs. IDTYPE,
GUI Value Range: 3
MCC, and the MOC primary key and
characters
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
does not optimize
parameters such as theCellId,
valuesIDTYPE,
of these
GUI Value Range: 2 to 3 parameters.
MCC, and the MOC primary key and
characters
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
does not optimize
parameters such as theCellId,
valuesIDTYPE,
of these
GUI Value Range: parameters.
MCC, and the MOC primary key and
0~4294967295
foreign key parameters.
Identity-related parameters:Theinclude
MAE
Unit: None
GUI Value Range: does not optimize
parameters such as theCellId,
valuesIDTYPE,
of these
123400~130400,145800~1492
GUI Value Range: 0~16383 parameters.
MCC, and the MOC primary key and
00,151600~164200,173800~1
Unit: None foreign key parameters. The MAE
78800,185000~192000,28540 Non-MAE-optimized
does not optimize theparameters:
values of these
0~303600,361000~384000,38 include the non-identity-related
parameters.
6000~405000,422000~440000 parameters that the MAE does not
,460000~480000,499200~538 Range-value
optimize. Theparameters:
MAE obtainsinclude the
the values
000,620000~680000,693333~ parameters for which the
of these parameters from NEs. MAE
GUI Value Range: 0~1007
733333,2016667~2104166,22 calculates optimization values
Unit: None
29166~2279166 according to algorithm requirements
Non-MAE-optimized
and the value range of parameters:
each parameter
Unit: None
GUI Value Range: include the non-identity-related
on the MAE client or on NEs.
0~16777215,4294967295 parameters that the MAE does not
Unit: None Range-value
optimize. Theparameters:
MAE obtainsinclude the
the values
parameters for which the
of these parameters from NEs. MAE
GUI Value Range: 0~837 calculates optimization values
Unit: None according
Range-value to algorithm
parameters: requirements
include the
and the value range
parameters for which the of each
MAE parameter
GUI Value Range: on the MAE client or onvalues
NEs.
calculates optimization
0~272,65535
according to algorithm requirements
Unit: None
and the value range of each parameter
on the MAE client or on NEs.
 686970386.xls 文档密级

Optimizatio Parameter
MML Command Parameter NE Version
n Type Description

SET
Dynamic cell GBSS16.0
GCELLDYNTURNOF IDTYPE Index type. GBSC
power off and later
F
Index of a cell,
SET
Dynamic cell uniquely GBSS16.0
GCELLDYNTURNOF CELLID GBSC
power off identifying a cell in and later
F
a BSC6910.
SET Whether to enable
Dynamic cell TURNOFFENABL Index type of a co- GBSS16.0
GCELLDYNTURNOF the Dynamic Cell GBSC
power off E coverage and later
F Power Offcell. feature.If
the coverage area
SET of a cell is under
Dynamic cell SAMECVGCELLI GBSS16.0
GCELLDYNTURNOF the coverage area GBSC
power off DTYPE and later
F of another cell, the
cell can
Index of be a cell that
SET
Dynamic cell SAMECVGCELLI disabled
has
A cellthecan during
same be GBSS16.0
GCELLDYNTURNOF off-peak hours. GBSC
power off D coverage
disabled as the
only if and later
F
current
the loadcell. of the co-
SET coverage cell is
Dynamic cell SAMECVGCELLL When the load of GBSS16.0
GCELLDYNTURNOF lower than the GBSC
power off OADTHRD the same and later
F threshold
coverage
If the
specified number cellthis
by is
of
SET higher
channels
parameter than foror a
Dynamic cell TURNONCELLLO GBSS16.0
GCELLDYNTURNOF equal
period.to this
(including PDCH GBSC
power off ADTHRD and later
F threshold
and TCH) for a
period, theon a cell
occupied
SET
Dynamic cell TURNOFFCELLC This
disabled
that can
The
parameter
BSC6910 cell is
be GBSS16.0
GCELLDYNTURNOF specifies
enabled. a period GBSC
power off HANNUM disabled
checks theis lower
load of and later
F of time during
than
the this
co-coverage
which
Start a cell
Dynamic cell
SET cell
cannot oftime
threshold, the
be
for
the
target
enabled GBSS16.0
GCELLDYNTURNOF PROTECTTIME dynamically
procedure
cell once a for GBSC
power off or disabled
disabling
disablingThe a
the tocellA
cell. and later
F minute. target
prevent
cell
End
can istime
be frequent
allowedfor toif
triggered.
cell is
celldisableddisabled
enablingfrom or
SET be
Dynamic cell SAMECVGCELLL dynamically
the number of
disabling GBSS16.0
GCELLDYNTURNOF the time
disabling specified
a cell. A GBSC
power off OADSTATTM times
operations.in which the and later
F by
cell this
is parameter.
not allowed
load of the co-
When
to the cell
be disabled
coverage value is of
SET
Dynamic cell TURNOFFCELLS from
TURNOFFCELLS
lower thanthe time GBSS16.0
GCELLDYNTURNOF Whether to enable GBSC
power off TRTIME TPTIME
specified
"SAMECVGCELL isbylessthis and later
F joint turning-off for
than
parameter.
LOADTHRD" the value WhenisofIf
SET a low-band
Threshold
TURNOFFCELLS
the value forcell.
of value
Dynamic cell TURNOFFCELLS equal
this to the
parameter
determining
TRTIME, the is GBSS16.0
GCELLDYNTURNOF TURNOFFCELLS
of this parameter. GBSC
power off TPTIME set to
whether ON,
Dynamic isCell a the and later
F TPTIME
Threshold less
for
low-band
neighboring
Power
than the Off cell (for
cell
feature
value of
SET determining
example,
meets the onco- the
Dynamic cell can
whether be enabled
LOWBANDCOTU TURNOFFCELLS a serving GBSS21.1
GCELLDYNTURNOF 900
coverage
for MHzthan
more
TRTIME, band)
the a GBSC
power off RNOFFSW cell can be and later
F can be
condition.
day.
Dynamic jointly
If the
Cell
disabled.
turned
level off.
ofOff If the
If this
thefeature
SET Power
Dynamic cell COCOVLEVELTH proportion
parameter
neighboring
can be enabled
of
iscell
set is GBSS21.1
GCELLDYNTURNOF measurement
to OFF, joint GBSC
power off LD greater
for than
moreindicating
than a or and later
F reports
turning-off is not
equal
day. to this
that
allowed neighboring
threshold forinthe the
SET
Dynamic cell COCOVRATIOTH cells
low-band meetcell.
measurement the GBSS21.1
GCELLDYNTURNOF GBSC
power off LD joint
report, co-coverage
the and later
F
level threshold
neighboring cell
condition
meets theinco- all
Dynamic cell DSP measurement GBSS16.0
IDTYPE Index
coverage type. GBSC
power off GCELLCOCOVINFO reports is greater and later
condition.
than or equal to
the value of this
parameter, the
serving cell can
08/24/2023 be disabled.
华为保密信息,未经授权禁止扩散 第330页，共633页
 686970386.xls 文档密级

Index of a cell,
Dynamic cell DSP uniquely GBSS16.0
CELLID GBSC
power off GCELLCOCOVINFO identifying a cell in and later
a BSC.
TRX power
amplifier SET GBSS16.0
IDTYPE Index type. GBSC
intelligent GCELLCHMGAD and later
shutdown
TRX power Index of a cell,
amplifier SET uniquely to
Whether GBSS16.0
CELLID GBSC
intelligent GCELLCHMGAD identifying a cell in
consider dynamic and later
shutdown a BSC6910.
PDCHs that have
TRX power
been converted
amplifier SET TURNOFFLOADT GBSS16.0
into PDCHs when GBSC
intelligent GCELLCHMGAD YPE This parameter is and later
calculating the cell
shutdown This
set parameter
to prevent the
TRX power load for dynamic
specifies
BSC orwhether
from
turn-off turn-on
amplifier BSCDYNSWITCH GBSS16.0
SET BSCDSTPA to
of a cell. the TRX
enable
frequently GBSC
intelligent TRXPAALLOW and later
Intelligentor
enabling
shutdown
TRX power Shutdownthe
disabling feature.
TRX.
amplifier PROTECTTIMET After a TRX is GBSS16.0
SET BSCDSTPA GBSC
intelligent RXPOWERON powered on, the
This parameter and later
shutdown BSC is not
specifies the time
TRX power allowed to disable
for dynamically
amplifier STARTTIMETACL the TRX within the GBSS16.0
SET BSCDSTPA enabling the TRX GBSC
intelligent OSETRXPA This
periodparameter
of time and later
Intelligent
shutdown specifies
TRX power Shutdownthe
specified by time
this
feature
for dynamically
parameter.
each day.
amplifier ENDTIMETACLO GBSS16.0
SET BSCDSTPA disabling the TRX GBSC
intelligent SETRXPA and later
Intelligent
shutdown
TRX power Shutdown feature
amplifier SET each day. GBSS16.0
IDTYPE Index type. GBSC
intelligent GCELLBASICPARA and later
shutdown This parameter
TRX power Index of awhether
specifies cell,
amplifier SET uniquely
to enable the TRX GBSS16.0
CELLID This parameter GBSC
intelligent GCELLBASICPARA identifying
Working a cell in
Voltage and later
shutdown specifies
a BSC6910. whether
TRX power Adjustment
to allow the
amplifier SET DYNOPENTRXPO feature.
BSC6900 Whento this GBSS16.0
parameter GBSC
intelligent GCELLBASICPARA WER enable the is TRXset and later
shutdown to YES, the
Intelligent
TRX power BSC6900
Shutdown feature
amplifier SET supports
on a cell. the GBSS16.0
BTSADJUST GBSC
intelligent GCELLBASICPARA feature where the and later
shutdown TRX can use
TRX power different working
amplifier voltages in GBSS16.0
SET GCELLOTHEXT IDTYPE Index type. GBSC
intelligent different TRX and later
shutdown modulation
TRX power Index of a cell,
amplifier modes. The
uniquely GBSS16.0
SET GCELLOTHEXT CELLID This
eGBTS parameter
does notin GBSC
intelligent identifying a cell and later
shutdown specifies
support
a the
this
BSC6910.
TRX power number
parameter.of idle
amplifier RESERVEDIDLE channels that GBSS16.0
SET GCELLOTHEXT GBSC
intelligent CH should be and later
shutdown reserved on a cell
TRX power after the TRX is
amplifier shut GBSS16.0
SET GTRXDEV IDTYPE Indexdown.
type. GBSC
intelligent and later
shutdown
TRX power
amplifier GBSS16.0
SET GTRXDEV TRXID Index of a TRX. GBSC
intelligent and later
shutdown

08/24/2023 华为保密信息,未经授权禁止扩散 第331页，共633页

 686970386.xls 文档密级

TRX power Unit of power.

amplifier This parameter GBSS16.0
SET GTRXDEV POWTUNIT GBSC
intelligent can be setwhether
specifies to W or and later
shutdown 0.1allow
to dBm.the
TRX power
BSC6900 to
amplifier GBSS16.0
SET GTRXDEV CPS enable or disable GBSC
intelligent and later
the power
shutdown Indicates whether
amplifier of a TRX
the
basedPSU onintelligent
the
PSU smart SRAN9.0
SET PSUISS(eGBTS) PSUISS shutdown switch GBSC
traffic volume.
control and later
in a BS is enabled
or disabled.
PSU smart GBSS16.0
SET BTSOTHPARA IDTYPE Index type. GBSC
control and later

PSU smart GBSS16.0

SET BTSOTHPARA BTSID Index of the BTS. GBSC
control and later
This parameter
specifies whether
PSU smart PSUTURNINGOF the BTS is GBSS16.0
SET BTSOTHPARA GBSC
control FENABLE allowed to enable and later
Whether the BTS
the PSU Smart
TRX power
is allowed to
Control feature.
amplifier
enable
This the
parameter GBSS16.0
intelligent SET BTSOTHPARA TSSHTDOWNEN GBSC
timeslot-level
specifies whether and later
shutdown on
intelligent
the TRX
multi-carrier
timeslot level
shutdown. unit
transceiver
TRX voltage GBSS16.0
SET BTSOTHPARA PAADJVOL supports the
Indicates Multi-
whether GBSC
adjustment and later
Carrier
the Intelligent
multi-carrier
Voltage
transceiver unit
SET Regulation
TRX voltage supports the Multi- SRAN9.0
GBTSENERGYMGTP PAADJVOL feature.Intelligent GBSC
adjustment Carrier and later
ARA(eGBTS)
Voltage
All Regulation
This parameter GBSC/
feature. the RAN16.0
optimization DSP LICUSAGE TYPE specifies eGBT
and later
types query type. S
All This parameter GBSC/
RAN16.0
optimization DSP LICENSE FUNCTIONTYPE specifies the eGBT
and later
types function type. S
This parameter GBSC/
PSU smart RAN16.0
DSP ELABEL DEVTYPE specifies the type eGBT
control and later
of a port. S
This parameter
PSU smart specifies the eGBT RAN16.0
DSP ELABEL CN
control cabinet number of S and later
a board.
This parameter
GBSC/
PSU smart specifies the RAN16.0
DSP ELABEL SRN eGBT
control subrack number and later
S
of a board.
This parameter
GBSC/
PSU smart specifies the slot RAN16.0
DSP ELABEL SN eGBT
control number of a and later
S
board.
This parameter
PSU smart specifies the RAN16.0
DSP BTSELABEL CN GBSC
control cabinet number of and later
a board.
This parameter
PSU smart specifies the RAN16.0
DSP BTSELABEL SRN GBSC
control subrack number and later
of a board.

08/24/2023 华为保密信息,未经授权禁止扩散 第332页，共633页

 686970386.xls 文档密级

This parameter
PSU smart specifies the slot RAN16.0
DSP BTSELABEL SN GBSC
control number of a and later
board.
PSU smart
DSP BTSELABEL IDTYPE Index type. GBSC RAN16.0
control 及以后
Index of the BTS,
PSU smart uniquely
DSP BTSELABEL BTSID GBSC RAN16.0
control identifying a BTS 及以后
in a BSC6910.
PSU smart
DSP BTSELABEL QRYTYPE Query type. GBSC RAN16.0
control 及以后
This parameter
PSU smart specifies the eGBT RAN16.0
DSP PMU CN
control cabinet number of S and later
a PMU.
This parameter
PSU smart specifies the eGBT RAN16.0
DSP PMU SRN
control subrack number S and later
of a PMU.
This parameter
PSU smart eGBT RAN16.0
DSP PMU SN specifies the slot
control S and later
number of a PMU.

08/24/2023 华为保密信息,未经授权禁止扩散 第333页，共633页

 686970386.xls 文档密级

Operation Description MAE Value Range and Unit

Use this command to set the GUI Value Range: BYNAME, BYID,
parameters for dynamically turning BYCGI
off a cell. Unit: None
Use this command to set the
GUI Value Range: 0 to 2047
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the GUI Value Range: DISABLE,
parameters for dynamically turning ENABLE, AUTOCOTURNOFF
off a cell. Unit: None
Use this command to set the
GUI Value Range: BYNAME, BYID
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the
GUI Value Range: 0 to 2047
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the Value Range: 0 to 100
parameters for dynamically turning Default Value: 50
off a cell. Unit: %
Use this command to set the Value Range: 0 to 100
parameters for dynamically turning Default Value: 80
off a cell. Unit: %
Use this command to set the Value Range: 0 to 8
parameters for dynamically turning Default Value: 3
off a cell. Unit: None
Use this command to set the Value Range: 0 to 255
parameters for dynamically turning Default Value: 5
off a cell. Unit: min
Use this command to set the Value Range: 0 to 16
parameters for dynamically turning Default Value: 5
off a cell. Unit: None
Use this command to set the
Value Range: 00:00 to 23:59
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the
Value Range: 00:00 to 23:59
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the
Value Range: OFF, ON
parameters for dynamically turning
Unit: None
off a cell.
Use this command to set the
Value Range: 0 to 63
parameters for dynamically turning
Unit: db
off a cell.
Use this command to set the
Value Range: 0 to 100
parameters for dynamically turning
Unit: %
off a cell.
Use this command to query the Value Range: BYNAME, BYID,
information about co-coverage BYCGI
neighboring cells of a cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第334页，共633页

 686970386.xls 文档密级

Use this command to query the

Value Range: 0 to 2047
information about co-coverage
Unit: None
neighboring cells of a cell.
Use this command to set the
GUI Value Range: BYNAME, BYID
advanced channel management
Unit: None
parameters of a cell.
Use this command to set the
GUI Value Range: 0 to 2047
advanced channel management
Unit: None
parameters of a cell.
Use this command to set the
Default Value: DYNPDCHASIDLE
advanced channel management
Unit: None
parameters of a cell.
Use this command to set the
parameters of dynamic shutdown of Value Range: NO, YES
the TRX, including startup time, Unit: None
and protection time.
Use this command to set the
Value Range: 60 to 3600
parameters of dynamic shutdown of
Default Value: 300
the TRX, including startup time,
Unit: s
and protection time.
Use this command to set the
parameters of dynamic shutdown of Value Range: 00:00 to 23:59
the TRX, including startup time, Unit: None
and protection time.
Use this command to set the
parameters of dynamic shutdown of Value Range: 00:00 to 23:59
the TRX, including startup time, Unit: None
and protection time.
Use this command to modify the
GUI Value Range: BYNAME, BYID
basic parameters of a GSM internal
Unit: None
cell.
Use this command to modify the
GUI Value Range: 0 to 2047
basic parameters of a GSM internal
Unit: None
cell.
Use this command to modify the
Value Range: NO, YES
basic parameters of a GSM internal
Unit: None
cell.
Use this command to modify the
Value Range: NO, YES
basic parameters of a GSM internal
Unit: None
cell.

Use this command to set extended GUI Value Range: BYNAME, BYID
parameters of a cell. Unit: None

Use this command to set extended GUI Value Range: 0 to 2047

parameters of a cell. Unit: None

Value Range: 0 to 16
Use this command to set extended
Default Value: 3
parameters of a cell.
Unit: None

Use this command to set the device GUI Value Range: BYNAME, BYID
attributes of a TRX. Unit: None

Use this command to set the device GUI Value Range: 0 to 8191
attributes of a TRX. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第335页，共633页

 686970386.xls 文档密级

Use this command to set the device GUI Value Range: W, 0_1DBM
attributes of a TRX. Unit: None

Use this command to set the device Value Range: NO, YES
attributes of a TRX. Unit: None

Use this command to set the power

Value Range: NO, YES
supplying unit (PSU) intelligent
Unit: None
shutdown switch in a BS.

Use this command to set other GUI Value Range: BYNAME, BYID
parameters of a BTS. Unit: None

Use this command to set other GUI Value Range: 0 to 2047

parameters of a BTS. Unit: None

Use this command to set other Value Range: NO, YES

parameters of a BTS. Unit: None

Use this command to set other Value Range: NO, YES

parameters of a BTS. Unit: None

Use this command to set other Value Range: NO, YES

parameters of a BTS. Unit: None
This command is used to set the
GBTS function energy
management parameter when the Value Range: NO, YES
external power of a BTS is Unit: None
interrupted to save the backup
power.
Run this command to query the
authorized values and usage of NA
license items of operators on NEs.
Run this command to query the
configuration of the license that NA
takes effect in the system.
Value Range: CABINET,
SUBRACK, BOARD, SUBBOARD,
Run this command to query the type o
SFP, GPS, ALD, ANTENNA
Unit: none
Value range: 0 to 62
Run this command to query the cabin
Unit: none

Value Range: 0 to 254

Run this command to query the subra
Unit: none

Value Range: 0 to 11, 16, 18 to 19

Run this command to query the slot n
Unit: none

Value Range: 0 to 62
Run this command to query the cabin
Unit: none

Value Range: 0 to 254

Run this command to query the subra
Unit: none

08/24/2023 华为保密信息,未经授权禁止扩散 第336页，共633页

 686970386.xls 文档密级

Value Range: 0~23

Run this command to query the slot n
Unit: none

Value Range: BYNAME(By Name),

Use this command to query the electrBYID(By Index)
Unit: None

Value Range: 0~7999

Use this command to query the electr
Unit: None
Value Range: CABINET(Cabinet),
SUBRACK(Subrack), BRD(Board),
Use this command to query the electrSFP(SFP Module), ALD(ALD),
ANTENNA(Antenna)
Unit: None
Value Range: 0 to 62
Run this command to query the dyna
Unit: none

Value Range: 7, 17 to 18
Run this command to query the dyna
Unit: none

Value Range: 0
Run this command to query the dyna
Unit: none

08/24/2023 华为保密信息,未经授权禁止扩散 第337页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize
parameters for whichthe the
values
MAEof these
parameters.
calculates optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the
Fixed-value MOC primary
parameters: key and
include the
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthatthese
parameters.
are displayed on the MAE client and
Fixed-value parameters:
can be modified by users.include
The MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that
that
are
are displayed on the
filtered according MAE client
to algorithm and
Fixed-value
can parameters: include
be modified by users. The MAE the
requirements.
parameters
delivers the for
fixedwhich theof
values MAEthese
provides built-in default values
parameters based on the objects that
that
are
are displayed on the
filtered according MAE client
to algorithm and
Fixed-value
can parameters: include
be modified by users. The MAE the
requirements.
parameters
delivers the for
fixedwhich theof
values MAEthese
provides built-in default values
parameters based on the objects that
that
are
are displayed on the
filtered according MAE client
to algorithm and
Fixed-value
can parameters: include
be modified by users. The MAE the
requirements.
parameters
delivers the for
fixedwhich theof
values MAEthese
provides built-in default values
parameters based on the objects that
that
are
are filtered according to algorithmand
displayed on the MAE client
can be modified by users. The MAE
requirements.
Range-value parameters:
delivers the fixed values ofinclude
these the
parameters for which the MAE
parameters based on the objects that
calculates
are filteredoptimization
according tovalues
algorithm
according to
requirements. algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters
parameter on forthe
which
MAEthe MAEor on
client
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter
parameterson the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters. The MAE
does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第338页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
Fixed-value parameters:The
foreign key parameters. includes
MAE the
parameters for which the MAE
does not optimize the values of these
provides
parameters.built-in default values that
cannot be modified by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
Fixed-value toparameters:
requirements.
according include the
algorithm requirements
parameters for which the
and the value range of each MAE
provides
parameter on the MAE client orthat
built-in default values on
are
NEs.displayed on the MAE client and
can be modified by users. The MAE
Range-value parameters:
delivers the fixed values ofinclude
these the
parameters for which the MAE
parameters based on the objects that
calculates
are filteredoptimization
according tovalues
algorithm
according to
requirements. algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize
parameters the the
for which values
MAEof these
parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter
parameterson the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the
Fixed-value MOC primary
parameters: key and
include the
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthat
these
parameters.
are displayed on the MAE client and
can be modified by users. The MAE
delivers the fixed
Identity-related values of these
parameters: include
parameters based
such asonCellId,
the objects
IDTYPE, that
are filtered
MCC, according
and the to algorithm
MOC primary key and
requirements.
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第339页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
requirements.
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize
parameters the the
for which values
MAEof these
parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs.
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第340页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. mAOS does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第341页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description
The logical
Whether thecell ID
Multi-carrier ADD uniquely identifies
dynamic
CellId RNC
shutdown UCELLDYNSHUTDOWN a cell in a radio
shutdown
network.
Type
algorithm of cell is
dynamic
enabled in a cell.
Multi-carrier ADD
DynShutdownSwitch shutdown.
ON_1, ON_2, When and RNC
shutdown UCELLDYNSHUTDOWN
this
ON_3 parameter
indicate is
Start
set
thattoone, timetwo, of the and
first interval
FORCESHUTDO
three shutdown when
Multi-carrier ADD
StartTime1 the
WN.the
periods cell dynamic
RNCbe set
can RNC
shutdown UCELLDYNSHUTDOWN
shutdown
attempts to feature
respectively.
End
is valid.time of shut
the
down a cell in
first interval when
Multi-carrier ADD each cell
EndTime1 the cell dynamic RNC
shutdown UCELLDYNSHUTDOWN shutdown period
Start time of the if
feature
the load
is valid. interval
second in a
Multi-carrier ADD neighboring
when the cellcell is
StartTime2 light. When this RNC
shutdown UCELLDYNSHUTDOWN dynamic
End
parameter
shutdown time offeature
istheset
second
to
is valid. interval
Multi-carrier ADD when the cell
QOSSHUTDOWN
EndTime2 RNC
shutdown UCELLDYNSHUTDOWN dynamic
, the RNC
shutdown
Start
attempts timetoof feature
the
shut
is valid.
third
down a cell inwhen
interval
Multi-carrier ADD
StartTime3 the cell
each celldynamic RNC
shutdown UCELLDYNSHUTDOWN
shutdown featureif
End
is valid. time ofperiod the
the
third intervala when
load of
Multi-carrier ADD neighboring cell is
EndTime3 the cell dynamic RNC
shutdown UCELLDYNSHUTDOWN so light that high-
shutdown feature
Threshold for the
priority
is valid. users'
total number
throughput does of
Multi-carrier ADD DCH and CCH
DynShutDownType not fluctuate RNC
shutdown UCELLDYNSHUTDOWN users
sharplyinwhen a cell.they
The
Threshold RNC
are handedfor over the
attempts
number
to the neighboringoftoHSDPA
shut
Multi-carrier ADD
TotalUserNumThd down
users
cell. When a
incell
a cell.when
this RNC
shutdown UCELLDYNSHUTDOWN
the
The number
RNC
parameter for isofset
Threshold
DCH
attempts and toCCH shut the
to
number of HSUPA
Multi-carrier ADD users
down
IRATSHUTDOWN incell
a thiswhen cell is
HsdpaUserNumThd users
Whether
less in ato
than cell.
or equal RNC
shutdown UCELLDYNSHUTDOWN the number
.consider
When this of
The
to the
HSDPA RNC valueuser
users ofsetdata
this
in
parameter
attempts
Threshold
on common to isshut
for load
parameter.
this
to cell is less
Multi-carrier ADD down
margin
channels
than ora ofcell
equala when
during to
HsupaUserNumThd RRUDORMANCY, RNC
shutdown UCELLDYNSHUTDOWN the
cell
the number
neighboring
shutdown.
value of of
cell.
this
the carrier
HSUPA
The
When RNC thisusersoverin
switch
parameter.
different
this
attempts
is cell isRRUs
turned toless
on, shut
userswill
Multi-carrier ADD be shut
thannot down
ora allowed
equal to to
NCellLdrRemainThd down
are cell when RNC
shutdown UCELLDYNSHUTDOWN during
the off-peak
shutvalue
load
Thresholddown offor
margin this
UMTS theof
hours.
parameter.
a neighboring
cells
number When
if there
of multi-isthis
cell
Multi-carrier ADD DynShutDownCchUserS data parameter
is
carrier HSDPA or
greaterbeing is
than set
carried
to
equalcommon to athe value RNC
shutdown UCELLDYNSHUTDOWN witch over
users in cell. If
CCISHUTDOWN,
of this
channels.
the numberparameter.
When
of
carriers
this switch
multi-carrier on is a
Multi-carrier ADD This
frequencyparameter
turned off, will
the be
McHsdpaUserNumThd HSDPA users in a RNC
shutdown UCELLDYNSHUTDOWN specifies
shut
RNC down
is whether
allowed basedto
cell is not greater
to
on
shut
thanallow
the down
the co-new UMTSUEs
to access
coverage
cells even the the cell
if there
Multi-carrier ADD UserAccessCtrlBfShutSwi threshold,
to be shut
identification
is data
RNC down
being to
attempts RNC
shutdown UCELLDYNSHUTDOWN tch
during
result
carriedduring
automatically the
over period
off-
specified
peak
common hours.
close the cell. by the
handover
channels. waiting
timer T1 (30s).

08/24/2023 华为保密信息,未经授权禁止扩散 第342页，共633页

 686970386.xls This parameter 文档密级
specifies whether
to forbid blind
handover toward
Multi-carrier ADD
BlindHOLimitSwitch cells where multi- RNC
shutdown UCELLDYNSHUTDOWN
carrier shutdown
is implemented
Multi-carrier based on pilot
ADD UINTERFREQNCELL RNCId ID
power of an RNC
adjustment. RNC
shutdown
Priority of a
neighboring cell
Multi-carrier during
ADD UINTERFREQNCELL CellId Uniquecoverage-ID of a cell RNC
shutdown based inter-
Source
frequency of
neighboring
handovers. cells.
Multi-carrier Uniquethis
When RNC ID of
ADD UINTERFREQNCELL NCellRncId RNC
shutdown a neighboring
parameter cell
is set
Value 0 indicates
to
that USER,
the ID cellofdoes
Unique
neighboring a
cells
Multi-carrier not support
ADD UINTERFREQNCELL NCellId neighboring
are configured cellby RNC
shutdown coverage-based
users. When this
inter-frequency
parameter
handovers.isValue set
Multi-carrier to SONOPTI,
ADD UINTERFREQNCELL HOCovPrio 1 indicates that RNC
shutdown neighboring cells
the cell has the
are
highestconfigured
priority by for
the SON
coverage-based feature
Multi-carrier
ADD UINTERFREQNCELL UinterNcellSRC based on the
inter-frequency RNC
shutdown
optimization
handovers. Value
results.
The
Whether When
logical
3 indicates cellthis
thethat ID
Multi-carrier MOD parameter
uniquely
dynamic
the cell is set
identifies
CellId Type
to of has
SONMEAS, cell the RNC
shutdown UCELLDYNSHUTDOWN a cell
shutdown
lowest inpriority
a radiofor
dynamic
neighboring
network.
algorithm
coverage-based is cells
shutdown.
are configured When
enabled
inter-frequency in a cell.
Multi-carrier MOD this
during parameter
the is
DynShutdownSwitch ON_1,
handovers. ON_2, and RNC
shutdown UCELLDYNSHUTDOWN set to
optimization of the
ON_3 indicate
FORCESHUTDO
Start
that one, two,the
SON time
feature, of and
WN,
first
which the
interval cellwhen
helps is
detect
Multi-carrier MOD three shutdown
StartTime1 shut
the down
cell dynamic
shutdown UCELLDYNSHUTDOWN missing
periods can be set RNC
unconditionally
shutdown
neighboring feature in
cells.
respectively.
End time of the
each
is valid. cell
first
shutdowninterval when
period.
Multi-carrier MOD
EndTime1 the cell
When this dynamic RNC
shutdown UCELLDYNSHUTDOWN
shutdown
Start time
parameter is set feature
of the
is valid. interval
second
to
Multi-carrier MOD when the cell
CONDITIONALSH
StartTime2 RNC
shutdown UCELLDYNSHUTDOWN dynamic
UTDOWN, the
End
shutdown time of the
feature
RNC
second attempts
intervalto
is
shutvalid.
Multi-carrier MOD whendown the cell a cell in
EndTime2 each cell RNC
shutdown UCELLDYNSHUTDOWN dynamic
shutdown
shutdown
Start time of period
feature
the if
the load
is valid.
third in a when
interval
Multi-carrier MOD neighboring cell is RNC
StartTime3 the cell dynamic
shutdown UCELLDYNSHUTDOWN light. When this
shutdown feature
End
parameter
is valid.time ofisthe set
third interval when
to
Multi-carrier MOD
EndTime3 the cell dynamic
QOSSHUTDOWN RNC
shutdown UCELLDYNSHUTDOWN
,shutdown
the RNC feature
Threshold for the
is valid.
attempts
total number to shutof
Multi-carrier MOD down
DCH a cell
and CCH in
DynShutDownType RNC
shutdown UCELLDYNSHUTDOWN each cell
users in a cell.
shutdown
The RNC period if
the load of
attempts toashut
Multi-carrier MOD neighboring cell is RNC
TotalUserNumThd down a cell when
shutdown UCELLDYNSHUTDOWN so
thelight
number that of high-
priority
DCH and users'
CCH
throughput
users in thisdoescell is
not fluctuate
less than or equal
sharply
to the value whenofthey this
08/24/2023 华为保密信息,未经授权禁止扩散 are handed over第343页，共633页
parameter.
to the neighboring
cell. When this
parameter is set
 Threshold for the
686970386.xls number of HSDPA 文档密级
users in a cell.
The RNC
Threshold
attempts tofor shut the
Multi-carrier MOD number of
down a cell when HSUPA
HsdpaUserNumThd users
Whether in atocell. RNC
shutdown UCELLDYNSHUTDOWN the number of
The RNC
consider
HSDPA users user data in
attempts
on cell istoless
Threshold
thiscommon shut
for load
Multi-carrier MOD down
than ora of
margin
channels cella when
during
equal to
HsupaUserNumThd RNC
shutdown UCELLDYNSHUTDOWN the
the value of of
number
neighboring
cell shutdown. cell.
this
HSUPA
The
When RNC
parameter. users
this switch in
this
is cell ison,
attempts
turned toless
shut
users
Multi-carrier MOD thannotora allowed
equal to to
NCellLdrRemainThd down
are cell when RNC
shutdown UCELLDYNSHUTDOWN value offorthis
the load
shut down
Threshold margin
UMTS theof
parameter.
a neighboring
cells
number if there
of multi-iscell
Multi-carrier MOD DynShutDownCchUserS is greater
data
carrierbeing
HSDPAthan
carried or
equal to the value RNC
shutdown UCELLDYNSHUTDOWN witch over common
users in a cell. If
of this
channels.
the parameter.
number When
of
this switch is
multi-carrier
Multi-carrier MOD turned off, theRNC
McHsdpaUserNumThd HSDPA
Whether users
the in a RNC
shutdown UCELLDYNSHUTDOWN RNCisisnot allowed to
cell
disallows greater
the
shut
than down
access theof new UMTS
Multi-carrier MOD UserAccessCtrlBfShutSwi Whether
cells
userseven
threshold,
duringtothe
if there
the
prevent
is data
RNC being from
UEs
attempts to RNC
shutdown UCELLDYNSHUTDOWN tch period specified
being
by theblindly
carried over
automatically
handover
handed
common
close
waiting the over
cell.to a
timer
Multi-carrier MOD cell enabled
channels.
T1(30s). with
BlindHOLimitSwitch RNC
shutdown UCELLDYNSHUTDOWN the dynamic
shutdown
algorithm through
Multi-carrier P-CPICH power
MOD UINTERFREQNCELL RNCId ID of an RNC RNC
shutdown adjustment.
Priority of a
Whether
neighboring the cellload
Multi-carrier of neighboring
during coverage-
MOD UINTERFREQNCELL CellId Unique
cells ID of to a cell RNC
shutdown basedisinter-
used
determine
frequency
whether
handovers. to shut
Multi-carrier Uniquea RNC
down cell whenID of
MOD UINTERFREQNCELL NCellRncId RNC
shutdown a neighboring
User Migration cell
Value 0 indicates
Type
that is set
the celloftodoes
Unique
PCPICHPOWERAID a
Multi-carrier not support
MOD UINTERFREQNCELL NCellId neighboring
DJUST or cell
whether RNC
shutdown coverage-based
to start up a cell
inter-frequency
when Cell Start
handovers. Value
Multi-carrier Up Type is set
MOD UINTERFREQNCELL HOCovPrio 1 indicates thatto RNC
shutdown GRADUALLY.
the cell has the
When
highestthis priority for
parameter
coverage-based is set
Multi-carrier
MOD UINTERFREQNCELL DynCellShutDownFlag to TRUE,
inter-frequency the load RNC
shutdown
of neighboring
handovers. Value
cells is usedthat
3 indicates to
Multi-carrier determine
theofcell
RMV UINTRAFREQNCELL RNCId ID
whether anhas RNC. the
to shutfor RNC
shutdown lowest priority
down or whether
coverage-based
to start up a cell.
inter-frequency
Multi-carrier Unique
When ID of a
this
RMV UINTRAFREQNCELL CellId handovers. RNC
shutdown cell.
parameter is set
to FALSE, the
Multi-carrier load of RNC ID of
Unique
RMV UINTRAFREQNCELL NCellRncId neighboring cells RNC
shutdown a neighboring cell.
is not used to
determine
Multi-carrier Unique
whetherID to ofshut a
RMV UINTRAFREQNCELL NCellId RNC
shutdown neighboring
down or whether cell
to start up a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第344页，共633页

 686970386.xlsIndicates the cell 文档密级
ID of the local cell.
It uniquely
identifies a cell
Multi-carrier
MOD UTRANNCELL LocalCellId within an eNodeB. eNodeB
shutdown Indicates the
This parameter
Indicates
circuit
applies only theto
switched
mobile
(CS)
LTE country
priority
FDD the and ofLTE the
Multi-carrier Indicates
MOD UTRANNCELL Mcc code
neighboring
Indicates of the eNodeB
shutdown TDD.
priority
neighboring
UTRAN forthe the
priority
Indicates
neighboring of thethe
UTRAN cell.
frequency,
neighboring that
cellis,
mobile network
UTRAN frequency
Multi-carrier the priority
during blind for the
MOD UTRANNCELL Mnc code
to carryof the
CS+PS eNodeB
shutdown neighboring
handovers.
Indicates theBlind
neighboring
combined
UTRAN
handover
frequency frequency
ispriority
a
UTRAN cell.
services. In
to carry
Indicates
process
based onCS
in the which
which RNC
Multi-carrier measurement-
services. During
MOD UTRANNCELL RncId ID
the
the of the
eNodeB
eNodeB external eNodeB
shutdown based
Indicates
CSFB-based CSFB the to CS
UTRAN
instructs
selects cell.
a UE
a iftarget to
UTRAN,
RNC-wide
service handoverscell ID
hand
frequency over
UtranCsfbSteering
of the external to ablind
for
Multi-carrier with
specified
redirection orIt
MOD UTRANNCELL CellId Switch
UTRAN and
UtranFreqLayerM cell. eNodeB
shutdown neighboring
contains
UtranFreqLayerM a cell.
uniquely
easSwitch identifies
being
There
frequency
easSwitch
a cell are 32
within in
areana
on, the
priorities
measurement eNodeB
Multi-carrier turned
RNC.
Indicates
selects on,
and the the cell eNodeB
MOD UTRANNCELL BlindHoPriority altogether.
configuration.
eNodeB The If a
shutdown ID of the
delivers
priority
blind
determines has athecell.
local
the
redirection is
It uniquely
neighboring
positive
triggered
UTRAN
identifies and
frequency
a withcell the
Multi-carrier UTRAN
correlation
target neighboring
MOD UTRANNFREQ LocalCellId to
withinbe
frequenciesdelivered
an eNodeB. to eNodeB
shutdown the
cell
a UE value
is not
in of based
this
This
on the
parameter.parameter
CSthe Note
Indicates
specified,
RRC_CONNECT
applies only the toDL
priorities
that
UARFCN
eNodeB the when
valueof
selects the0 a
Multi-carrier ED
LTE
startingmode
FDD that based
and LTE
MOD UTRANNFREQ UtranDlArfcn indicates
neighboring
target
on the frequency
priority cell eNodeB
shutdown TDD.
measurements.
blind
on thehandovers
based
specified UTRAN
on thisthis to
by
The
the eNodeB
neighboring
frequency.
priority. If a The
parameter.
preferentially
Multi-carrier cell are
measurement
eNodeB not
MOD UTRANNFREQ ConnFreqPriority delivers
allowed. This is to eNodeB
the
shutdown configuration
preferentially
UTRAN
parameter
be delivered,frequency
applies
the
delivers
with the the
highest
only
eNodeB
UTRAN to LTE frequency FDD
Multi-carrier CS
and priority
LTE
preferentially TDD. to
MOD UTRANNFREQ CsPriority with the highest eNodeB
shutdown measure.
delivers combineda During
CS+PS
CSFB-based
frequency
service prioritywithCS the
to
service
highest handovers
Multi-carrier the
with UE. In blind If
priority.
MOD UTRANNFREQ CsPsMixedPriority this priority is set eNodeB
shutdown CSFB to UTRAN,
UtranFreqLayerBli
ifto 0 for a
ndSwitch
frequency,being
UtranCsfbSteering this
Multi-carrier on,
Uniquelythe eNodeB
frequency identifies
is not
SET UALGORSVPARA LogicRncId Switch
selects and
the RNC
shutdown a
RRM logical
selected astarget
RNC.
algorithm
UtranFreqLayerBli the
cells
targetfor
reserved blind
switch
frequency
ndSwitch
handovers are on The
parameter
for a blind
turned on, 19.
the
Multi-carrier neighboring
SET UALGORSVPARA RsvSwitch19 32-bit
redirection.
target parameter
cellthe isA RNC
shutdown Whether
UTRAN
is
largerreserved
selected valuebased for on
activation
Type
frequencies
further ofchange state
starting based of
SET indicates
the
the priority
CBS a higher
function
Multi-carrier up
on
requesta
the
Uniquely shutdown
CSuse.
identifies
URNCCELLSHUTDOWNPA LogicRncId priority.
specified
is consideredThis
by this for RNC
shutdown cell.
a The RNC.
priorities
logical value
and
RA parameter
parameter.
enabling applies
The
When
IMMEDIATELY theDynamic
preferentially switch
only
cell
Cell onto the
LTE FDD
Shutdown
SET is on,
indicates
selects thethe Cell
that targetthe
Multi-carrier DynShutDownIgnoreCbs and
UTRAN
Based
dynamic
pilot
cell
LTE on
power
for
TDD.
frequency
blind Traffic
is set
URNCCELLSHUTDOWNPA with RNC
shutdown
RA
Switch Load, thethe
shutdown
to
handovers or highest
Dynamic
configured on the
priority
Cell
algorithm
value
neighboring is
Shutdown of the
SET preferentially
Based
local
UTRAN RNC
(PCPICHPower on QoS,
cell isor
frequency in
Multi-carrier
URNCCELLSHUTDOWNPA DynCellShutDownSwitch selected.
Dynamic
enabled.
the
withADD If this
Cell
When
the highest RNC
shutdown parameter
Shutdown is off,
Based set
RA the switch is
UCELLQUICKSE
CS priorities. If
to
thisPriority_0,
on
the
TUP RRU
Cell Intelligent
dynamic
command
parameter the isor
RRU UTRAN
Dormancy.
shutdown frequency
ADD PCPICHPower
set to Priority_0,in
Intelligent CellStartUpType is not
algorithm includedof thein RNC
UCELLDYNSHUTDOWN the
this MOD UCELL
neighboring
Dormancy priority
local RNC cell is a
command)
UTRAN when
frequency
arrangement
disabled.
shutdown
is not prioritized. cellfor is
neighboring
restarted.
This parameter The
UTRAN
value
applies only to
frequencies
GRADUALLY
LTE FDD and to LTE
08/24/2023 华为保密信息,未经授权禁止扩散 carry
indicates
TDD. CS+PS that the 第345页，共633页
combined
pilot power is
services.
gradually This
parameter
increased to applies
the
 connect the
Ratio
network
Type of
Co-coverage threshold
all day of
co-
UEs
coveragesupport
long
neighboringthat
and cell
inter-frequency
neighboring
interference cells
686970386.xls bands andbasic
is are 文档密级
providing
threshold
Threshold for
for RRUthe
enabled
considered
coverage withinthe RRU
the
Intelligent
number
Intelligent
inter-band offor times
source
Dormancy
compressed cell and inmodethe
RRU Dormancy
scenario with and RRU
ADD RRU
Cell
is Intelligent
Switch-off
triggered for
Intelligent CoCovNCellType Cell Switch-off
Intelligent RNC
UCELLDYNSHUTDOWN Dormancy
Based inter-
UMTS on feature
Dormancy Based
Dormancy on and
and
Automatic
frequencythe Cell Co-
RRU Automatic
Cell
Switch-off
Coverage Switch-off Co-
Based
ADD Type
InterBandNCellInterfereT measurements
Coverage
Based ofon online
Intelligent on
user
after Automatic
Identification
migration
co-coverage Co- RNC
in
UCELLDYNSHUTDOWN hd Identification
Automatic
Coverage Co-in
Dormancy the
from inter-band
neighboringa shutdown cell
inter-band
Coverage
Identification
scenario. The cell
RRU cell.
learning
scenarios.The isvalue
Identification RRU
ADD feature.
can
BLINDHO
enabled. be shut When down
Intelligent InterBandUeThd Intelligent
enabled.
only when Whenthe RNC
UCELLDYNSHUTDOWN indicates
this parameter that is
Dormancy Dormancy
this switch
background and
is noise
online
set
Type
Cell
turned ofausers
toSwitch-off
on,value
starting are
RRU of the
blindly
greater
up a co-
handed
than
shutdown 0, the
ADD Based
RefUeBandAccessCapab whether
coverage on the UE
Intelligent over
RNC
cell.
Automatic to
MOvalue
The Co- RNC
UCELLDYNSHUTDOWN Switch supports
neighboring inter- cell is
Dormancy neighboring
determines
IMMEDIATELY
Coverage cells.
the
frequency
lower than bands
thisthe
The
number
indicates value
Identification
is considered. ofthat times are In
RRU threshold.
ADD PCPICHPOWERA
compressed
pilot
allowed
this power
situation, onlyismode set
when
the RNC
Intelligent UserMigrationType
UCELLDYNSHUTDOWN DJUST
is
to
the triggered
the
Whether
cell ratio indicates
configured
shutdown of
theUEs inratiois
Dormancy
that
each
value the
supporting
of UEs that
allowed cell pilot
onlyserved
inter-
when
RRU power
by the of
SRNC the in in
ADD COCOVCELLLEARNCM (PCPICHPower
frequency
connect
the ratio
shutdown
the
of bands
UEs
cell isof RNC
Intelligent the
Ratio
all current
ADD
day
network
that threshold
connectlong
all day active
isthe
UCELLCOALGOENHPARA NUMTHLD Co-coverage
gradually reduced
Dormancy set
greater
long
networkwithin
UCELLQUICKSE
UEs that
andthan all an
support
day hour.
or
neighboring
to
The
TUP trigger
function
command cell
of or
RRU inter-frequency
equal
long and
interference to this
support
MOD coverage-based
identifying
PCPICHPower
threshold.
bands
inter-frequencyand
is co-
are in
Intelligent CellStartUpType Type
threshold
intra-or
Threshold
coverage of inter-
co- for
for RRUthe RNC
UCELLDYNSHUTDOWN the
enabledMOD
considered
bands is UCELL
with
greater in RRU
the
Dormancy coverage
Intelligent
frequency
number of times
neighboring
command)
Intelligent
inter-band
than or equal cells
when to a
neighboring
Dormancy
outgoing
compressed
can
shutdown trigger and
the
cell cells
modeis
RRU Dormancy
scenario
the value with and
of RRU
MOD providing
Cell
handovers
is
UEs Switch-off
triggered
restarted. to enter basic
Thefor
forthe
Intelligent CoCovNCellType Cell Switch-off
Intelligent
InterBandUeThd. RNC
UCELLDYNSHUTDOWN coverage
Based
online
UMTS
compressed
value this on for mode
users.
inter- the
Dormancy Based
Dormancy
When on and
switch
source
Automatic
frequency
and
GRADUALLYperform cellCo- ininter-
the
RRU Automatic
Cell
is
RRU turned
Coverage Switch-off off,
Intelligent Co-
MOD Type
InterBandNCellInterfereT measurements
frequency
indicates
Coverage
Based ofon online
thatUE the
Intelligent whether
Dormancy
Identification the feature.
in RNC
UCELLDYNSHUTDOWN hd user
after migration
co-coverage
measurements
pilot power
Identification
Automatic is
Co-in
Dormancy supports
the inter-band inter-
from
neighboring
only
gradually
inter-band
Coverage a shutdown
if the times cell
frequency
scenario. bands
The cell
RRU cell.
learning
compressed
increased
scenarios.The isvalue
Identification to
RRU mode
the
MOD is
can not be considered.
shut down
Intelligent InterBandUeThd BLINDHO
enabled.
is triggered
configured
Intelligent
enabled. When
When are
value RNC
UCELLDYNSHUTDOWN Threshold
only
indicates
this
less when
parameter
than of
thethe
that
this is
Dormancy when
Dormancy
this a
switch shutdownand
is
maximum
background
online
set to
threshold. ausers
value number
When noise
are
cell
Cell
turned isSwitch-off
restarted.
on,
RRU of UEs
the
blindly
greater
this parameterco-that
handed
than can0, is the
MOD RefUeBandAccessCapab Lower
Based
whether
start
coverage the threshold
onthe UE
Intelligent over
RNC
set
Upper
for to
Automatic to
MO0,
the threshold the
number Co- of RNC
UCELLDYNSHUTDOWN Switch supports
compressed
neighboring inter- mode
cell is
Dormancy neighboring
determines
preceding
for the
delivered
Coverage number cells.
the of
frequency
for
lower UMTS than bands
this
The
number
delivered value
restriction
frequency-level
Identification
is considered. of doestimes are In
RRU measurements
threshold.
MOD PCPICHPOWERA
compressed
not take
frequency-level
measurement
allowed
this situation, effect.
only mode
when
the RNC
Intelligent UserMigrationType after co-coverage
UCELLDYNSHUTDOWN DJUST
is triggered
measurement
control
the
cell ratio
shutdown indicates
messages
of band in is
UEs
Dormancy Frequency
neighboring cell
that
each
control
for thethe
supporting
allowed cell pilot
served
messages
function
only inter-
when of
RRU that
learning
power
by thesupports
of
SRNC isthe RRU
inof
MOD COCOVCELLLEARNCM learningfor the
frequency
the ratio
Intelligent
enabled. function
of bands
When UEs
Intelligent shutdown
the current
learning
information longcell active is RNC
Dormancy
UCELLCOALGOENHPARA NUMTHLD all
that
this
set
day
Dormancy.connect
parameter
gradually
within Ifabout
reduced
an
isthe
this
hour. is
information
the
greater
network
option
set co-coveragethan
all
aisvalue
tofunction about
day
selected or
to
The
the trigger
equal
long co-coverage
neighboringandtothanthis
support of If
cell.
RRU for all
greater the
coverage-based 0, the
RRUINTELDORFEQBAN identifying
neighboring
the number
threshold.
inter-frequency co- cell. If NodeB
of
Intelligent SET NODEBALGPARA frequency
function
intra-or
coverage of bands
inter-
D the
times
bands numberthat
is the
greater of
Dormancy supported
identifying
frequency
neighboring by
thethe co-
times
compressed
than
RRU
coverage orthat
or equal
RFU, thecells
mode
to
the
RRU outgoing
can triggerfor
compressed ofthe mode
CoCovCellLearnCMUeNu is thestarted
RRU value
neighboring
handovers
UEs orenter
to RFU for cell
the RNC
Intelligent SET UCOCOVERAGE is started
another
InterBandUeThd.
supports for
frequency
RRU
mThld can
online trigger
compressed users. the mode UE
Dormancy another
or
When the number
Intelligent thisfrequency
switch of
to
and enterperform the
RRU
or
times
is the
turned
Dormancy.
compressed number
that theinter-
off, mode of
CoCovCellLearnMaxMcN frequency
times
whether
and that
intra-frequency the the
perform inter- RNC UE
Intelligent SET UCOCOVERAGE measurements
um intra-frequency
measurement
supports inter-
frequency
Dormancy only if the times
measurement
control
frequency
measurement messagesbands only
RRU compressed
control
are
is not deliveredmessages
considered. mode
is
CoCovCellLearnMinMcNu ifis the total
triggered number
Intelligent SET UCOCOVERAGE are
greater
of delivered
compressed- thanare oris RNC
m less
greater than than thisor
Dormancy equal
mode to this
UEsWhen in all
threshold.
equal
threshold,
cells
this oftothe
parameter
this there
active
threshold,
are
set sufficient
is less the is
than
set
RNC
samplestostops0, the in the
this threshold.
preceding
compressed
frequency
When this does to mode
restriction
inter-frequency
determine the co-
08/24/2023 华为保密信息,未经授权禁止扩散 parameter
not take effect. is set 第346页，共633页
measurement
coverage
to 0, the or
intra-frequency
neighboring
preceding cell of
measurement
the sourcedoes
restriction cell.
 RNC does not
coverage
automatically
identification
learn information takes
effect. If
about the co-this
686970386.xls parameter
coverage is set 文档密级
to ON, cell cell. If
neighboring
shutdown
this parameter based is
RRU on automatic
set to co-
Intelligent SET UCOCOVERAGE CoCovCellLearnMode coverage
ONE_TIME_LEA RNC
Dormancy identification
RN, the RNCtakes
effect. In this
automatically
RRU case, the RAN
CELLSWITCHOFFBSDO learns information
Intelligent SET ULOCELLALGPARA identifies
about the co- co- NodeB
NCCISW
Dormancy coverage
Indicates
coverage the cells
Indicates
and whether
determines
Dynamic
neighboring
the PSU to Voltagecell
intelligent
PSU smart whether
Adjustment
Indicates
only once. theIfshut
time
this
SET PSUISS PSUISS shutdown
down cells switch
in set
athis NodeB
control Switch.
when the
parameter When is
in a BS is enabled
frequency band
switch is
optimization
to
or disabled. turned
Energy based
on, theon
algorithm the
dynamic
PERIODICAL_LE for
SET Indicates
status of the time
co-
efficiency DYNADJSW voltage
dynamic
ARN, the voltage NodeB
improvement
NODEBOPTDYNADJPARA when
coveragethe RNC
adjustment cells.
starts If
periodically
optimization learns
this parameter
function is
working.
information This aboutis
Energy algorithm
set to OFF, for
SET enabled
parameter
the and
co-coverage iscell
set
efficiency DYNADJSTARTTIME dynamic
shutdown
energy voltage
based NodeB
NODEBOPTDYNADJPARA on the hour.
neighboring When
cell.
improvement adjustment
on automatic
conservation stops
co-is
is
the current time
working.
coverage
achieved.
later This
than this
Energy
SET parameter
parameter,isthe
identification set
does
efficiency DYNADJENDTIME NodeB
NODEBOPTDYNADJPARA on
not the
take hour.
effect.
dynamic voltage When
improvement
the current time is
adjustment
All later
This thantakes
parameter
function this
optimization DSP LICUSAGE TYPE parameter,
specifies
effect. the the RNC
types dynamic
query type.voltage
adjustment
All This parameter
function stops
optimization DSP LICENSE FUNCTIONTYPE specifies
taking effect. the NodeB
types function type.
This parameter
Energy
specifies the
efficiency DSP BRD CN NodeB
cabinet number of
improvement
a board.
This parameter
Energy
specifies the
efficiency DSP BRD SRN NodeB
subrack number
improvement
of a board.
This parameter
Energy
specifies the slot
efficiency DSP BRD SN NodeB
number of a
improvement
board.
This parameter
PSU smart specifies the
DSP PMU CN NodeB
control cabinet number of
a PMU.
This parameter
PSU smart specifies the
DSP PMU SRN NodeB
control subrack number
of a PMU.
This parameter
PSU smart
DSP PMU SN specifies the slot NodeB
control
number of a PMU.
This parameter
Energy
specifies the
efficiency DSP BRDMFRINFO CN NodeB
cabinet number of
improvement
a board.
This parameter
Energy
specifies the
efficiency DSP BRDMFRINFO SRN NodeB
subrack number
improvement
of a board.
This parameter
Energy
specifies the slot
efficiency DSP BRDMFRINFO SN NodeB
number of a
improvement
board.

08/24/2023 华为保密信息,未经授权禁止扩散 第347页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to add

RAN16.0 parameters concerning the GUI Value Range: 0 to 65535
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
Value Range: OFF, ON_1, ON_2,
RAN16.0 parameters concerning the
ON_3
and later dynamic cell shutdown algorithm on
Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 00:00 to 23:59
and later dynamic cell shutdown algorithm on Unit: min
a per cell basis. Value Range:
Use this command to add
CONDITIONALSHUTDOWN,
RAN16.0 parameters concerning the
QOSSHUTDOWN，RRUDORMAN
and later dynamic cell shutdown algorithm on
CY，CCISHUTDOWN
a per cell basis.
Use this command to add Unit: None
RAN16.0 parameters concerning the Value Range: 5 to 30
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 2 to 10
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 2 to 10
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 0 to 100
and later dynamic cell shutdown algorithm on Unit: %
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: OFF, ON
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: 2 to 10
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN16.0 parameters concerning the Value Range: OFF, ON
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.

08/24/2023 华为保密信息,未经授权禁止扩散 第348页，共633页

 686970386.xls 文档密级

Use this command to add

RAN16.0 parameters concerning the Value Range: OFF, ON
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add an inter-
RAN16.0 GUI Value Range: 0 to 4095
frequency neighboring cell.
and later Unit: None

Use this command to add an inter-

RAN16.0 GUI Value Range: 0 to 65535
frequency neighboring cell.
and later Unit: None

Use this command to add an inter-

RAN16.0 GUI Value Range: 0 to 4095
frequency neighboring cell.
and later Unit: None

Use this command to add an inter-

RAN16.0 GUI Value Range: 0 to 65535
frequency neighboring cell.
and later Unit: None

Use this command to add an inter-

RAN16.0 Value Range: 0 to 3
frequency neighboring cell.
and later Unit: None

Use this command to add an inter-

RAN16.0 Default Value: SONOPTI
frequency neighboring cell.
and later Unit: None
Use this command to modify
parameters concerning the carrier
RAN16.0 GUI Value Range: 0 to 65535
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier Value Range: OFF, ON_1, ON_2,
RAN16.0
shutdown algorithm, which is based ON_3
and later
on the service load on a per cell Unit: None
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 00:00 to 23:59
shutdown algorithm, which is based
and later Unit: min
Value Range:
on the service load on a per cell
Use this command to modify
basis. CONDITIONALSHUTDOWN,
parameters concerning the carrier QOSSHUTDOWN，RRUDORMAN
RAN16.0
shutdown algorithm, which is based CY
and later
on the service load on a per cell Default Value:
Use this command to modify
basis. CONDITIONALSHUTDOWN
parameters concerning the carrier Unit: None
RAN16.0 Value Range: 5 to 30
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
basis.

08/24/2023 华为保密信息,未经授权禁止扩散 第349页，共633页

 686970386.xls 文档密级

Use this command to modify

parameters concerning the carrier
RAN16.0 Value Range: 2 to 10
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 2 to 10
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier Value Range: 0 to 100
RAN16.0
shutdown algorithm, which is based Default Value: 20
and later
on the service load on a per cell Unit: %
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: OFF, ON
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: 2 to 10
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: OFF, ON
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN16.0 Value Range: OFF, ON
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
basis.
Use this command to modify the
RAN16.0 Value Range: 0 to 4095
information about an inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
RAN16.0 Value Range: 0 to 65535
information about an inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
RAN16.0 Value Range: 0 to 4095
information about an inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
RAN16.0 Value Range: 0 to 65535
information about an inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
RAN16.0 Value Range: 0 to 3
information about an inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
RAN17.1 Value Range: FALSE, TRUE
information about an inter-
and later Unit: None
frequency neighboring cell.

RAN16.0 Use this command to remove an Value Range: 0~4095

and later inter-frequency neighboring cell. Unit: None

RAN16.0 Use this command to remove an Value Range: 0~65535

and later inter-frequency neighboring cell. Unit: None

RAN16.0 Use this command to remove an Value Range: 0~4095

and later inter-frequency neighboring cell. Unit: None

RAN16.0 Use this command to remove an Value Range: 0~65535

and later inter-frequency neighboring cell. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第350页，共633页

 686970386.xls 文档密级

Use this command to modify the

eRAN8.0 Value Range: 0~255
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 000~999
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 000~999,00~99
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 0~65535
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 0~65535
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 0~32
neighboring relation with a UTRAN
and later Unit: None
cell.
Use this command to modify the
eRAN8.0 Value Range: 0~255
configuration of a neighboring
and later Unit: None
UTRAN frequency.
Use this command to modify the
eRAN8.0 Value Range: 0~16383
configuration of a neighboring
and later Unit: None
UTRAN frequency. Value Range:
Use this command to modify the RESERVED_SWITCH_19_BIT1,
eRAN8.0 Value Range: 0~8
RESERVED_SWITCH_19_BIT2,
configuration of a neighboring
and later Unit:
ValueNone
Range: Priority_0, Priority_1,
RESERVED_SWITCH_19_BIT3,
UTRAN frequency.
Priority_2, Priority_3, Priority_4,
RESERVED_SWITCH_19_BIT4,
Use this command to modify the Priority_5, Priority_6, Priority_7,
RESERVED_SWITCH_19_BIT5,
eRAN8.0
configuration of a neighboring Priority_8, Priority_9, Priority_10,
RESERVED_SWITCH_19_BIT6,
and later Value Range: Priority_0,Priority_13,
Priority_1,
UTRAN frequency. Priority_11, Priority_12,
RESERVED_SWITCH_19_BIT7,
Priority_2, Priority_3, Priority_4,
Priority_14, Priority_15, Priority_16
Use this command to modify the RESERVED_SWITCH_19_BIT8,
Priority_5,
eRAN8.0 Unit: None Priority_6, Priority_7,
RESERVED_SWITCH_19_BIT9,
configuration of a neighboring Priority_8, Priority_9, Priority_10,
and later RESERVED_SWITCH_19_BIT10,
UTRAN frequency. Priority_11, Priority_12, Priority_13,
RESERVED_SWITCH_19_BIT11,
Priority_14, Priority_15, Priority_16
RAN15.0 Set System Level Reserved RESERVED_SWITCH_19_BIT12,
Unit:
ValueNone
Range: 0~4095
and later Parameters. RESERVED_SWITCH_19_BIT13,
Unit: None
RESERVED_SWITCH_19_BIT14,
RESERVED_SWITCH_19_BIT15,
RAN17.1 Set System Level Reserved RESERVED_SWITCH_19_BIT16,
and later Parameters. RESERVED_SWITCH_19_BIT17,
RESERVED_SWITCH_19_BIT18,
Use this command to set cell RESERVED_SWITCH_19_BIT19,
RAN15.0 Value Range: 0~4095
RESERVED_SWITCH_19_BIT20,
dynamic shutdown parameter in
and later Unit: None
RESERVED_SWITCH_19_BIT21,
RNC.
RESERVED_SWITCH_19_BIT22,
Use this command to set cell RESERVED_SWITCH_19_BIT23,
RAN19.1 Value Range: OFF, ON
dynamic shutdown parameter in RESERVED_SWITCH_19_BIT24,
and later Unit: None
RNC. RESERVED_SWITCH_19_BIT25,
Use this command to set cell RESERVED_SWITCH_19_BIT26,
RAN19.1 Value Range: OFF, ON
RESERVED_SWITCH_19_BIT27,
dynamic shutdown parameter in
and later Unit: None
RESERVED_SWITCH_19_BIT28,
RNC.
Use this command to add RESERVED_SWITCH_19_BIT29,
Value Range: IMMEDIATELY,
RESERVED_SWITCH_19_BIT30,
RAN19.1 parameters concerning the
GRADUALLY
RESERVED_SWITCH_19_BIT31,
and later dynamic cell shutdown algorithm on
Unit: None
RESERVED_SWITCH_19_BIT32
a per cell basis.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第351页，共633页

 686970386.xls 文档密级

Use this command to add

RAN19.1 parameters concerning the Value Range: INTERBAND
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN19.1 parameters concerning the Value Range: -112~-50
and later dynamic cell shutdown algorithm on Unit: dBm
a per cell basis.
Use this command to add
RAN19.1 parameters concerning the Value Range: 0~100
and later dynamic cell shutdown algorithm on Unit: %
a per cell basis.
Use this command to add
RAN19.1 parameters concerning the Value Range: OFF, ON
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add
RAN17.1 parameters concerning the Value Range: 0~255
and later dynamic cell shutdown algorithm on Unit: None
a per cell basis.
Use this command to add Value Range:
RAN21.1
connection-orientated cell-level PCPICHPOWERADJUST
and later
algorithm enhance parameters. Unit: None
Use this command to modify
parameters concerning the carrier Value Range: IMMEDIATELY,
RAN19.1
shutdown algorithm, which is based GRADUALLY
and later
on the service load on a per cell Unit: None
Use this command to modify
basis.
parameters concerning the carrier
RAN19.1 Value Range: INTERBAND
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN19.1 Value Range: -112~-50
shutdown algorithm, which is based
and later Unit: dBm
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN19.1 Value Range: 0~100
shutdown algorithm, which is based
and later Unit: %
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier
RAN19.1 Value Range: OFF, ON
shutdown algorithm, which is based
and later Unit: None
on the service load on a per cell
Use this command to modify
basis.
parameters concerning the carrier Value Range:
RAN17.1
shutdown algorithm, which is based PCPICHPOWERADJUST
and later
on the service load on a per cell Unit: None
basis.
Use this command to modify
RAN12.1 Value Range: 0~255
connection-orientated cell-level
and later Unit: None
algorithm enhance parameters.
Value Range: BAND1, BAND2,
RAN12.1 The command is used to set BAND3, BAND4, BAND5, BAND6,
and later NodeB algorithm parameters. BAND7, BAND8, BAND9
Unit: None
Use this command to set the
RAN19.0 algorithm of identifying the co- Value Range: 0~255
and later coverage neighboring cell of an Unit: None
RNC.
Use this command to set the
RAN19.0 algorithm of identifying the co- Value Range:0~10000
and later coverage neighboring cell of an Unit: None
RNC.
Use this command to set the
RAN19.0 algorithm of identifying the co- Value Range: 0~10000
and later coverage neighboring cell of an Unit: None
RNC.

08/24/2023 华为保密信息,未经授权禁止扩散 第352页，共633页

 686970386.xls 文档密级

Use this command to set the Value Range: NOT_LEARN,

RAN19.0 algorithm of identifying the co- ONE_TIME_LEARN,
and later coverage neighboring cell of an PERIODICAL_LEARN
RNC. Unit: None
This command is used to set the
RAN15.1 Value Range: OFF, ON
algorithm parameters of a specific
and later Unit: None
cell or all cells.
The command is used to set the
RAN16.0 switch, start time, and end time of Value Range: DISABLE, ENABLE
and later the dynamic voltage adjustment Unit: None
function.
The command is used to set the
RAN16.0 switch, start time, and end time of Value Range: OFF, ON
and later the dynamic voltage adjustment Unit: None
function.
The command is used to set the
RAN16.0 switch, start time, and end time of Value Range: 0 to 23
and later the dynamic voltage adjustment Unit: None
function.
The command is used to set the
RAN16.0 switch, start time, and end time of Value Range: 0 to 23
and later the dynamic voltage adjustment Unit: None
function.
Run this command to query the
RAN16.0
authorized values and usage of NA
and later
license items of operators on NEs.
Run this command to query the
RAN16.0
configuration of the license that NA
and later
takes effect in the system.

RAN16.0 Value Range: 0 to 62

Use this command to query the statu
and later Unit: none
Value Range: 0 to 1, 4 to 5, 7 to 8,
RAN16.0 11 to 12, 14 to 15, 17 to 18, 40 to
Use this command to query the statu
and later 254
Unit: none
RAN16.0 Value Range: 0 to 11, 16, 18 to 19
Use this command to query the statu
and later Unit: none

RAN16.0 Run this command to query the Value Range: 0 to 62

and later dynamic information about a PMU. Unit: none

RAN16.0 Run this command to query the Value Range: 7, 17 to 18

and later dynamic information about a PMU. Unit: none

RAN16.0 Run this command to query the Value Range: 0

and later dynamic information about a PMU. Unit: none
Run this command to query the
RAN16.0 manufacturing information about a Value Range: 0 to 62
and later board. Only one board can be Unit: none
queried at a time.
Run this command to query the Value Range: 0 to 1, 4 to 5, 7 to 8,
RAN16.0 manufacturing information about a 11 to 12, 14 to 15, 17 to 18, 40 to
and later board. Only one board can be 254
queried at a time. Unit: none
Run this command to query the
Value Range: 0 to 10, 16, 18 to 19,
RAN16.0 manufacturing information about a
255
and later board. Only one board can be
Unit: none
queried at a time.

08/24/2023 华为保密信息,未经授权禁止扩散 第353页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates
client optimization
or on NEs. values
Fixed-value
according toparameters:
algorithm include
the parameters
requirements and forthe
which therange
value MAE
provides
of each parameter on the MAE that
built-in default values
are displayed
client or on NEs.on the MAE client
and can be modified by users. The
Range-value
MAE delivers parameters: include
the fixed values of
the parameters for which
these parameters based on the the MAE
calculates
objects thatoptimization
are filtered values
according
according
to algorithmto algorithm
requirements.
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters
of each parameter for on
which
the the
MAE MAE
calculates
client optimization
or on NEs. values
Fixed-value
according toparameters:
algorithm include
the parameters
requirements and forthe
which therange
value MAE
provides
of each parameter on the MAE that
built-in default values
are displayed
client or on NEs.on the MAE client
and can be modified by users. The
Range-value
MAE delivers parameters: include
the fixed values of
the parameters for which
these parameters based on the the MAE
calculates
objects thatoptimization
are filtered values
according
according to algorithm
to algorithm requirements.
Range-value parameters:
requirements and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第354页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs. and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters. MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters. MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters. MCC, and the MOC
primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according toparameters:
Fixed-value algorithm includes
requirements
the parameters and
forthe value
which therange
MAE
of each parameter
provides on the
built-in default MAE that
values
client
cannotorbeonmodified
NEs. by users. The
MAE
Identity-relatedthe
delivers fixed values of
parameters:
these parameters
include parametersbased such on
as the
CellId,
objects that
IDTYPE, are and
MCC, filtered
the according
MOC
to algorithm
primary key andrequirements.
foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters
of each parameter for on
which
the the
MAE MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates
client optimization
or on NEs. values
Fixed-value
according toparameters:
algorithm include
the parameters
requirements and forthe
which therange
value MAE
provides
of each parameter on the MAE that
built-in default values
are displayed
client or on NEs. on the MAE client
and can be modified by users. The
Range-value
MAE delivers parameters: include
the fixed values of
the parameters for which
these parameters based on the the MAE
calculates
objects thatoptimization
are filtered values
according
according to algorithm
to algorithm requirements.
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第355页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates
client optimization
or on NEs. values
Fixed-value
according toparameters:
algorithm include
the parameters
requirements and forthe
which therange
value MAE
provides
of each parameter on the MAE that
built-in default values
are displayed
client or on NEs.on the MAE client
and can be modified by users. The
Range-value
MAE delivers parameters: include
the fixed values of
the parameters for which
these parameters based on the the MAE
calculates
objects thatoptimization
are filtered values
according
according
to algorithmto algorithm
requirements.
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs. and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Range-value
parameters. The parameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters
of each parameter for on
which
the the
MAE MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs. and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第356页，共633页

 686970386.xls 文档密级
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs.and the MOC
primary key and foreign key
Identity-related
parameters. Theparameters:
MAE does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs.and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the parameters
optimize for which
the values the MAE
of these
calculates
parameters. optimization values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs.and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第357页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters
of each for on
parameter which
the the
MAE MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第358页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs.and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimizeparameters
the values such as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
Identity-related
parameters. mAOS parameters:
does not
include
optimize the values such
parameters as CellId,
of these
IDTYPE,
parameters.MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第359页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description
Intelligent Indicates whether to
Indicates
enable or the local
disable
power-off of
ID of the cell.
intelligent It
power-off
carriers in the MOD CELLSHUTDOWN LocalCellId eNodeB
uniquely
of carriersidentifies
in the a
same
Intelligent cell within
same a BS.
coverage.
coverage
power-off of Intelligent power-off
carriers in the MOD CELLSHUTDOWN CellShutdownSwitch of carriers in the eNodeB
same same coverage can
Intelligent
coverage Indicates
be performed the start
only
power-off of time of intelligent
when this parameter
carriers in the MOD CELLSHUTDOWN StartTime power-off
Indicates
is set to ON of and
the carriers eNodeB
same in the
downlink
specific same PRB
conditions offset
Intelligent
coverage Indicates
coverage. the stop
power-off of for
arestopping
time met.
of intelligent
carriers in the MOD CELLSHUTDOWN StopTime intelligent
power-off the
Indicates power-off
of carriers eNodeB
same of carriers
in the same
downlink in the
PRB
Intelligent
coverage same
coverage.coverage for
threshold for
power-off of the cell. The
starting intelligent
carriers in the MOD CELLSHUTDOWN DlPrbThd downlink eNodeB
power-offPRB
Indicates of carriers
the
same threshold
in theoffset
same for uplink
Intelligent
coverage PRB for
stopping
coverage intelligent
for the
power-off of stopping
Indicates intelligent
whether
power-off
cell. of carriers
carriers in the MOD CELLSHUTDOWN DlPrbOffset power-off
the of carriers
neighboring cell eNodeB
in the
Indicatessame the uplink
same in
is the same
identified as a
Intelligent coverage
PRB threshold forcell
for the
coverage coverage
power-off of neighboring tofor
is equal intelligent
starting the the
cell sum
carriers in the MOD CELLSHUTDOWN UlPrbThd cell. The
overlapping
power-off uplink
of the downlink the PRB
PRB
of carriers eNodeB
same threshold
local E-UTRAN
threshold
in the same for
for cell.
Intelligent
coverage stopping
The default
starting
coverage intelligent
forvalue
the is
intelligent
power-off of power-off
NO.
cell. The
power-off of carriers
parameter
of carriers
carriers in the MOD CELLSHUTDOWN UlPrbOffset in
in the
value same
the YES
sameindicates eNodeB
same coverage
that for
andthe
coverageneighboring
the thecell
Intelligent
coverage is
power-off of MOD value of this sum
equal
cell is to the
identified as a
of the uplink
neighboring
parameter. PRB
cell
carriers in the EUTRANINTERFREQNC OverlapInd threshold forthe eNodeB
overlapping
same ELL starting intelligent
local E-UTRAN
Indicates whether cell.
coverage Indicates
power-off
The the
parameterof local to
carriers
RF channel enable orcell.
disable
MOD ID of the
in the
value same
NO It
indicates
intelligent LocalCellId RF channel eNodeB
CELLRFSHUTDOWN uniquely
coverage
that identifies
and
the neighboring the a
shutdown intelligent shutdown
cell
value within
cellthe of
is not thisa BS.
for cell.identified
RF
RF channel parameter.
as a neighboring
MOD channel intelligent
intelligent RfShutdownSwitch cell overlapping eNodeB
CELLRFSHUTDOWN shutdown can bethe
shutdown local E-UTRAN
performed in thecell.
cell
Indicates
This when
only the
parameterthisstart
RF channel
MOD time
applies of the
parameter onlyis cell
to RF
setLTEto
intelligent StartTime eNodeB
CELLRFSHUTDOWN channel
FDD and intelligent
ON and certain LTE TDD.
shutdown
shutdown.
conditionsthe arestop met.
Indicates
RF channel
MOD time of RF channel
intelligent StopTime eNodeB
CELLRFSHUTDOWN intelligent shutdown
shutdown
for the cell.
Indicates the
RF channel downlink PRB
MOD
intelligent DlPrbThd usage threshold for eNodeB
CELLRFSHUTDOWN
shutdown RF channel
Indicates
intelligent the uplink
shutdown.
RF channel PRB usage
MOD
intelligent UlPrbThd threshold for RF eNodeB
CELLRFSHUTDOWN
shutdown channel intelligent
Indicates the
shutdown.physical
downlink
RF channel
MOD resource block
intelligent DlPrbOffset eNodeB
CELLRFSHUTDOWN (PRB) offset for RF
shutdown
channel intelligent
shutdown.

08/24/2023 华为保密信息,未经授权禁止扩散 第360页，共633页

 for RF channel
and NB-IoT. If this
intelligent shutdown.
option is selected,
The cell enters RF
PAs are shut down
channel intelligent
when no signal is
686970386.xls shutdown mode if
transmitted using 文档密级
all of the following
OFDM symbols in
conditions
Indicates are met:
downlink the uplink
RF channel (1) the number
physical resource of
MOD subframes, reducing
intelligent UlPrbOffset RRC_CONNECTED
block
CELLRFSHUTDOWN power(PRB) offset
consumption. eNodeB
shutdown UEs
forthis
RF is channel
less than or
If option is
equal
Indicates to this
intelligent shutdown.
the
RF channel selected for aUE
MOD threshold;
number threshold (2) the
intelligent UENumThd multimode base eNodeB
CELLRFSHUTDOWN uplink
for RF cellchannel load is
shutdown station, the base
lower than
intelligent or equal
shutdown.
Indicates
station must whether
use
to the preset uplink
the PSUconservation
energy intelligent
PSU smart PRB usage; (3) the
SET PSUISS PSUISS shutdownofswitch
features non-LTE in eNodeB
control downlink cell load is
a BS isatenabled
RATs the same or
lower than or equal
disabled.
time to reduce
to the preset
Symbol MOD power consumption.
PowerSaveSwitch downlink PRB eNodeB
shutdown ENODEBALGOSWITCH This option applies
usage. The cell
Intelligent only to LTE FDD
exits
IndicatesRF channelthe local
power-off of and NB-IoT.
intelligent
ID of the cell. shutdown
It
carriers in the DSP CELLSHUTDOWN LocalCellId TddSymbolShutdow eNodeB
mode
uniquely if any of the a
identifies
same nSwitch: Indicates
Intelligent following
cell withinconditions
a BS.
coverage Indicates
whether towhether theenable
local
power-off of DSP is met: (1) the
intelligent
symbol
ID of thepower power-off
cell. It
carriers in the EUTRANINTERFREQNC LocalCellId number of eNodeB
of carriers
Indicates
saving
uniquely in theTDD.
the
foridentifies
LTE a
same ELL RRC_CONNECTED
Intelligent same
penalty
If this
cell coverage
duration
option
within is for
a BS.
coverage UEs exceeds this
power-off of supports
the triggering
selected, inter-BBU
PAs are
threshold; (2) the
carriers in the MOD CELLSHUTDOWN PunishTime carrier
condition
shut down shutdown.
detection
when no If eNodeB
uplink cell load is
same this
of the
signal parameter
intelligent
is transmitted is set
Intelligent higher than the sum
coverage to ON,OFDM
carrier
using intelligent
power-off
power-off of of the uplink PRB
power-off
symbols inofdownlink
feature. carriers
carriers in the MOD CELLSHUTDOWN UENumThd usage threshold and eNodeB
in the same reducing
subframes,
same the uplink PRB
Intelligent coverage
power consumption. supports
coverage usage offset; (3) the
power-off of inter-BBU
If this option carrier
is
InterBbuCarrierShutdo downlink cell load is
carriers in the MOD CELLSHUTDOWN shutdown,
selected forand a inter- eNodeB
wnSw higher than the sum
same BBU
multimodecarrierbase
of the downlink PRB
coverage shutdown
station, theisbase
usage threshold and
performed
station must when
use
the downlink
This parameter PRB
certain
energy conditions
conservation
All usage offset.
specifies the If this
index
are met. of
features If this
non-LTE
optimization DSP LICINFO CNOPERATORINDEX parameter
of the
parameter operator
RATs at theissame
is settoto
set to eNodeB
types a smallavalue,
whom licensethe
OFF,
time tointelligent
reduce
eNodeB
belongs. is less
power-off
power consumption. of carriers
likely to trigger RF
in
Thistheoption
sameapplies
channel intelligent
coverage
only to LTE doesTDD. not
shutdown for the
support inter-BBU
cell, hampering
carrier shutdown.
All eNodeB
This power
parameter
optimization DSP LICINFO FUNCTIONTYPE saving. If the
specifies this eNodeB
types parameter
function type. is set to
a large value, the
eNodeB is more
likely to trigger RF
channel intelligent
shutdown for the
All cell, affecting UE
optimization DSP LICUSAGE TYPE services.
Query type. For LTE eNodeB
types TDD cells, this
parameter takes
effect only when the
RfShutdownJudging
Policy parameter in
the CellRfShutdown
MO is set to
PRB_AND_UE_NU
MBER(PRB_AND_
UE_NUMBER).

08/24/2023 华为保密信息,未经授权禁止扩散 第361页，共633页

 686970386.xls 文档密级

All
optimization DSP LICUSAGE CNOPERATORINDEX Cn Operator Index eNodeB
types

This parameter
PSU smart
DSP PMU CN specifies the cabinet eNodeB
control
number of a PMU.

This parameter
PSU smart specifies the
DSP PMU SRN eNodeB
control subrack number of
a PMU.

This parameter
PSU smart
DSP PMU SN specifies the slot eNodeB
control
number of a PMU.

This parameter
Symbol power
DSP BRDMFRINFO CN specifies the cabinet eNodeB
saving
number of a board.

This parameter
Symbol power specifies the
DSP BRDMFRINFO SRN eNodeB
saving subrack number of
a board.

This parameter
Symbol power
DSP BRDMFRINFO SN specifies the slot eNodeB
saving
number of a board.

08/24/2023 华为保密信息,未经授权禁止扩散 第362页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Use this command to modify the

eRAN7.0 configuration of intelligent power- GUI Value Range: 0 to 255
and later off of carriers in the same Unit: None
coverage.
Use this command to modify the
Value Range: OFF, ON,
eRAN7.0 configuration of intelligent power-
ON_CO_COV_AUTO_IDENT
and later off of carriers in the same
Unit: None
coverage.
Use this command to modify the
Value Range: 00:00:00 to
eRAN7.0 configuration of intelligent power-
23:59:59
and later off of carriers in the same
Unit: None
coverage.
Use this command to modify the
Value Range: 00:00:00 to
eRAN7.0 configuration of intelligent power-
23:59:59
and later off of carriers in the same
Unit: None
coverage.
Use this command to modify the
eRAN7.0 configuration of intelligent power- Value Range: 0 to 100
and later off of carriers in the same Unit: %
coverage.
Use this command to modify the
eRAN7.0 configuration of intelligent power- Value Range: 0 to 100
and later off of carriers in the same Unit: %
coverage.
Use this command to modify the
eRAN7.0 configuration of intelligent power- Value Range: 0 to 100
and later off of carriers in the same Unit: %
coverage.
Use this command to modify the
eRAN7.0 configuration of intelligent power- Value Range: 0 to 100
and later off of carriers in the same Unit: %
coverage.
Use this command to set the
eRAN7.0 Value Range: NO, YES
overlap indicator of the inter-
and later Unit: None
frequency neighboring cell.
Use this command to modify the
eRAN7.0 GUI Value Range: 0 to 255
configuration of RF channel
and later Unit: None
intelligent shutdown in a cell.
Use this command to modify the
eRAN7.0 Value Range: OFF, ON
configuration of RF channel
and later Unit: None
intelligent shutdown in a cell.
Use this command to modify the Value Range: 00:00:00 to
eRAN7.0
configuration of RF channel 23:59:59
and later
intelligent shutdown in a cell. Unit: None
Use this command to modify the Value Range: 00:00:00 to
eRAN7.0
configuration of RF channel 23:59:59
and later
intelligent shutdown in a cell. Unit: None
Use this command to modify the
eRAN7.0 Value Range: 0 to 100
configuration of RF channel
and later Unit: %
intelligent shutdown in a cell.
Use this command to modify the
eRAN7.0 Value Range: 0 to 100
configuration of RF channel
and later Unit: %
intelligent shutdown in a cell.
Use this command to modify the
eRAN7.0 Value Range: 0 to 100
configuration of RF channel
and later Unit: %
intelligent shutdown in a cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第363页，共633页

 686970386.xls 文档密级

Use this command to modify the

eRAN7.0 Value Range: 0 to 100
configuration of RF channel
and later Unit: %
intelligent shutdown in a cell.
Use this command to modify the
eRAN11.0 Value Range: 0 to 20
configuration of RF channel
and later Unit: None
intelligent shutdown in a cell.
Use this command to set the
Value Range: DISABLE,
eRAN7.0 power supplying unit (PSU)
ENABLE
and later intelligent shutdown switch in a
Unit: None
BS.
Value Range:
eRAN7.0 Use this command to set the SymbolShutdownSwitch,
and later symbol shutdown switch in a BS. TddSymbolShutdownSwitch
Unit: None
Display Intelligent Power-Off of
eRAN7.0 GUI Value Range: 0 to 255
Carriers in the Same Coverage
and later Unit: None
Information.
Display Inter-Frequency
eRAN7.0 GUI Value Range: 0 to 255
Neighboring Relation with E-
and later Unit: None
UTRAN Cell .
Use this command to modify the
eRAN7.0 configuration of intelligent power- GUI Value Range: 0 to 360
and later off of carriers in the same Unit: min
coverage.
Use this command to modify the
eRAN15.1 configuration of intelligent power- GUI Value Range: 0 to 100
and later off of carriers in the same Unit: None
coverage.
Use this command to modify the
eRAN15.1 configuration of intelligent power- GUI Value Range: OFF, ON
and later off of carriers in the same Unit: None
coverage.

eRAN7.0 Run this command to query

NA
and later license sales information.

eRAN7.0 Run this command to query

NA
and later license sales information.

Use this command to query the

eRAN7.0
allocated values and license NA
及以后
usage of operators.

08/24/2023 华为保密信息,未经授权禁止扩散 第364页，共633页

 686970386.xls 文档密级

Use this command to query the

eRAN7.0 allocated values and license NA
及以后
usage of operators.

Run this command to query the

eRAN7.0 Value Range: 0 to 62
dynamic information about a
and later Unit: none
PMU.

Run this command to query the

eRAN7.0 Value Range: 7, 17 to 18
dynamic information about a
and later Unit: none
PMU.

Run this command to query the

eRAN7.0 Value Range: 0
dynamic information about a
and later Unit: none
PMU.

Run this command to query the

eRAN7.0 manufacturing information about Value Range: 0 to 62
and later a board. Only one board can be Unit: none
queried at a time.

Run this command to query the Value Range: 0 to 1, 4 to 5, 7 to

eRAN7.0 manufacturing information about 8, 11 to 12, 14 to 15, 17 to 18, 40
and later a board. Only one board can be to 254
queried at a time. Unit: none

Run this command to query the

Value Range: 0 to 10, 16, 18 to
eRAN7.0 manufacturing information about
19, 255
and later a board. Only one board can be
Unit: none
queried at a time.

08/24/2023 华为保密信息,未经授权禁止扩散 第365页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related
requirements and parameters:
the value range
include parameters
of each parameter on such
theas CellId,
MAE
IDTYPE, MCC,
client or on NEs.and the MOC
primary key and foreign key
Range-value
parameters. Theparameters:
MAE does include
not
the
optimize the values of these MAE
parameters for which the
calculates
parameters. optimization values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates optimization
client or on NEs. values
according to algorithm
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAEthe MAE
calculates
client or onoptimization
NEs. values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第366页，共633页

 686970386.xls 文档密级
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
Fixed-value
according toparameters:
algorithm include
the parameters
requirements and forthe
which therange
value MAE
provides
of each parameter on the MAE that
built-in default values
are displayed
client or on NEs.on the MAE client
and can be modified by users. The
Range-value
MAE delivers parameters: include
the fixed values of
the parameters for which
these parameters based on the the MAE
calculates
objects thatoptimization
are filtered values
according
according
to algorithmto algorithm
requirements.
Range-value
requirements parameters:
and the value include
range
the parameters for which
of each parameter on the MAE the MAE
calculates optimization
client or on NEs. values
according to algorithm
Identity-related parameters:
requirements and the value range
include parameters such as CellId,
of each parameter on the MAE
IDTYPE, MCC, and the MOC
client or on NEs.
primary key and foreign key
Identity-related parameters:
parameters. The MAE does not
include parameters such as CellId,
optimize the values of these
IDTYPE, MCC, and the MOC
parameters.
primary key and foreign key
Range-value parameters: include
parameters. The MAE does not
the parameters for which the MAE
optimize the values of these
calculates optimization values
parameters.
according to algorithm
Range-value parameters: include
requirements and the value range
the parameters for which the MAE
of each parameter on the MAE
calculates optimization values
client or on NEs.
according to algorithm
Range-value parameters: include
requirements and the value range
the parameters for which the MAE
of each parameter on the MAE
calculates optimization values
client or on NEs.
according to algorithm
requirements and the value range
of each parameter on the MAE
Identity-related
client or on NEs.parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第367页，共633页

 686970386.xls 文档密级

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. mAOS does not
optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第368页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description
Type

SET
– PcSwitch Power Control Switch
UCORRMALGOSWITCH

Indicates the Local Cell ID.

– MOD ULOCELL ULOCELLID The local cell ID is unique
for one NodeB.
Indicates whether the cell
supports the Interference
– MOD ULOCELL ICMODE
Cancellation feature for
This
HSUPA parameter
services. specifies a
Uniquely used
constant identifying
at a
Indicatesinthe
PRACH
calculation type
aofcell.
the Theof local
ID of
initial
– MOD ULOCELL LOCELLTYPE
cell.
a common
transmit powerphysical
of the first
channel is to
preamble, used to identify
be used in
The
a
the logical physical
common
random cell
accessID uniquely
– MOD UPRACHUUPARAS CellId identifiesina acell
channel
procedure. in Each
cell. a radio
network. physical channel
common
is uniquely
The formulanumbered
is as follows:
within a cell. The IDs of =
Preamble_Initial_Power
– MOD UPRACHUUPARAS PhyChId
common
PCPICH DL physical
TX power channels
-
should be planned
CPICH_RSCP + ULbefore
the channels+are
interference Constant
– MOD UPRACHUUPARAS Constantvalue The
Value. power
configuredWhere, ramp
for thestep
cell.of
the random access
One cell can be configured
Preamble_Initial_Power is
preambles
with one or transmitted
the preamble two PRACHs.
initial TX
before the UE receives
It is recommended
power, Primary CPICHthat DLthe
– MOD UPRACHUUPARAS PowerRampStep acquisition
onepower
TX PRACH indicator
be downlink
is the in the
random
The
configured.
transmit access
maximum
(TX) power process.
number of of
For details
preambles about this
transmitted
PCPICH, CPICH_RSCP in is
a
parameter,
preamble see
ramping 3GPP
the receive signaling code TS
cycle.
– MOD UPRACHUUPARAS PreambleRetransMax 25.211.
For
power details
of the about
PCPICH this
parameter,
measured by UEs, andTS
see 3GPP UL
25.211.
interference is the uplink
– SET ULOCELLALGPARA ULOCELLID Indicates
interference. the ForLocal Cell ID.
details
about this parameter, see
3GPP
IndicatesTS the25.331.
RTWP
– SET ULOCELLALGPARA RTWPSIRTGTADJSW Abnormal SIR target
Adjustment Switch.
The logical cell ID uniquely
– MOD UCELLHSDPCCH CellId identifies a cell in a radio
network.
Load-based
Duration of aCQI
CQIfeedback
period for cycle
feedback a cell when
wherethe
– MOD UCELLHSDPCCH CQIFBckBaseCellLoad uplink
UE load
is in theissingle-RLS
heavy and
BE services
state. of aare
In each
Duration CQI
CQIcarried
over the HSDPA.
feedback cycle,when
cycle the UEthe
retransmits
UE is in the CQI for N
multi-RLS
– MOD UCELLHSDPCCH CQIFbCk
times repeatedly,
state. In each CQIwhere N
representscycle,
feedback the value
the UEof
CQI repetition
retransmits CQI factor.
for N The
– MOD UCELLHSDPCCH CQIFbCkforSHO value repeatedly,
times 0 indicates no CQIN
where
information
represents thesentvalue
fromofthe
UE. repetition factor in the
CQI
The logicalstate.
multi-RLS cell ID uniquely
The value
– ADD UCELLHSDPCCH CellId identifies
0 indicates no CQI radio
a cell in a
network.
information sent from the
UE.

08/24/2023 华为保密信息,未经授权禁止扩散 第369页，共633页

 Duration of a CQI
686970386.xls feedback cycle when the 文档密级
UE is in the single-RLS
state. In each
Duration of a CQI CQI
feedback cycle cycle,when the UE the
retransmits
UE is in the CQI multi-RLSfor N
– ADD UCELLHSDPCCH CQIFbCk
times
state. repeatedly,
In each CQIwhere N
representscycle,
feedback the value the UE of
CQI repetition
retransmits CQI factor.
for N The
– ADD UCELLHSDPCCH CQIFbCkforSHO value
times
If 0 indicates no
repeatedly,
[Auto-Adaptive CQIN
where
information the
represents
Background sent
Noise from
value of
Update the
UE.
CQI repetition
Switch] is set tofactor OFF,initthe is
multi-RLS
used to set state.
backgroundThe value
– MOD UCELLCAC CellId Unique
0 indicates ID of a CQI cell
noise of theno cell. If [Auto-
This parameter,
information
Adaptive sent along
Background from the with
the [Algorithm
UE. Update Switch] is
Noise stop time],
– MOD UCELLCAC BackgroundNoise is
setused
to ON, to limit
newthe
validation
background
When timenoise
the parameter of theis iswith
This parameter,
background noise along
restricted
'OFF',
the the by
[Algorithm this
auto-adaptive
start time],
automatic
parameter
background update
andnoise update
– MOD UCELLCAC BGNSwitch is used
algorithm. to limit
When the
BgnAbnormalThd.
algorithm
validation is
timeswitched
of Foroff.
the
[Algorithm
detailed
Otherwise, stop
information
the time]
algorithm ofisthis is
background
greater than noise
[Algorithm
parameter,
switched
automatic
Only
Thresholdwhenforon. refer
update
thethe to
measuredthe
start
3GPP time], and
TS background
25.133. the
– MOD UCELLCAC BgnStartTime algorithm.
background
abnormal When
noise's
background noise
[Algorithm
duration
noise
automatic used stop
reaches
in the
update time]
this is
greater
parameter,
automatic than the[Algorithm
background
algorithm is enabled, then output of
start
the
noise time],
auto-adaptive
update and the
algorithm.
the algorithm is activated
– MOD UCELLCAC BgnEndTime
background
Uplink
This
during cell
parameter
the periodnoise
load is update
threshold
used
of to
automatic
filter
for could
the optimized
prevent
[Algorithm update
startregarded
be
excess to as
fluctuation
time]
algorithm
effect
background
of
[Algorithm isstop
the background enabled,
noise time] noise,
noise thenif
each
– MOD UCELLCAC BGNAdjustTimeLen the
and algorithm
the
algorithm.
the current
background When is
day. In other periods, the activated
value
noise is
during
replaced
BGNOptSwitch
provided the by period
algorithm does not takeone.
with the theis of
new
set
auto- to
[Algorithm
At
ON, thethe
adaptive
effect. same
RNC start
time, time]
checks
background theto noise
[Algorithm
auto-adaptive
whetherfilter
update stop
the is time]
status
ULTotalLoad
abnormal. each
– MOD UCELLCAC BGNULLoadThd day.
should Inisbe
other periods,
restarted; the
value
The RNC equal
does tonotor update
smaller
algorithm
otherwise,
than
the does
the output
the BGNULLoadThd
background not
noisetake could
effect.
not
value.
based be Ifon
regarded
yes,
thisthe as the
algorithm
parameter
– MOD UCELLCAC BgnAbnormalThd effective
uses
when the
eitherbackground
difference
of the
noise.
between the
following current is true:
conditions
RTWP
(1) Theand the
difference between
ULTotalLoad
the background
Threshold for value. noise the
updating
– MOD UCELLCAC BgnUpdateThd without beingnoise. filtered and
background
the current background
noise is greater
Whether the backgroundthan the
– MOD UCELLCAC BGNOptSwitch abnormal
noise update RTWP optimization
threshold.
algorithm takes (2) The effect.
difference between the
filtered background noise
– MOD UCELLLICENSE CellId Unique
and the ID of a cell value
configured
of the BackgroundNoise
parameter is greater than
Cell-level
the abnormal license RTWP switch for
– MOD UCELLLICENSE FuncSwitch2
the adaptive
threshold. RACH feature
Whether
The logicalto cell
enable the
ID uniquely
– MOD UCELLALGOSWITCH CellId algorithms related to
identifies a cell in a radio cell
load control.
network.
ACK_PRACH_PREAM_M
EAS: Whether to measure
– MOD UCELLALGOSWITCH NBMLdcAlgoSwitch the number of
acknowledged PRACH
preambles.
The logical cell ID uniquely
ADAPTIVE_RACH:
– MOD UCELLADAPTRACH CellId identifies a cell infora the
Function switch radio
network.
adaptive RACH feature.

08/24/2023 华为保密信息,未经授权禁止扩散 第370页，共633页

 Constant in the calculation
686970386.xls of initial UE transmit power文档密级
for the optimized random
access procedure.
Maximum number of This
times
constant
the PRACH is used when the
preambles can
congestion
be retransmittedthreshold
for for
the
– MOD UCELLADAPTRACH OptiConstantvalue
acknowledged
optimized random random
access
accesses isThis
procedure. reached and
parameter
Power
uplink
is increase
usedload
when thestepFor
is heavy. for
– MOD UCELLADAPTRACH the optimized
detailed information
OptiPreambleRetransMax congestion random
thresholdoffor this
access
parameter,procedure.
acknowledged seerandom
3GPPThisTS
parameter
accesses isisreached
25.331. used when and
the congestion
uplink load is heavy. threshold
For
– MOD UCELLADAPTRACH OptiPowerRampStep for acknowledged
detailed information random
of this
accesses
parameter, is reached
see 3GPPand TS
Indicates
uplink the cabinet
25.211.load
number of
is heavy. For
the RRU or
detailed information of this
– MOD RXBRANCH CN RFU where see
parameter, the RX
3GPP TS
channel
25.211. of the RRU or
Indicates the
RFU is located. subrack
number of the RRU or
– MOD RXBRANCH SRN RFU where the RX
channel of the RRU or
RFU is located.
Indicates the slot number
of the RRU or RFU where
– MOD RXBRANCH SN
the RX channel of the
RRU or RFU is located.
Indicates the attenuation
– MOD RXBRANCH ATTEN of the RX channel of the
RRU or RFU.
Indicates the number of
– MOD RXBRANCH RXNO the RX channel of the
RRU or RFU.
The logical cell ID uniquely
– ADD UCELLLICENSE CellId identifies a cell in a radio
network.
Cell-level license switch for
– ADD UCELLLICENSE FuncSwitch2 the adaptive RACH
feature.
Whether to cell
The logical enable the
ID uniquely
– ADD UCELLALGOSWITCH CellId algorithms related to cell
identifies a cell in a radio
load control.
network.
ACK_PRACH_PREAM_M
EAS: Whether to measure
– ADD UCELLALGOSWITCH NBMLdcAlgoSwitch the number of
acknowledged PRACH
preambles.
Selection of uplink power
ADAPTIVE_RACH:
– ADD UCELLALGOSWITCH NBMUlCacAlgoSelSwitch admission control
Function switch for the
algorithms
adaptive RACH feature.
Selection of downlink
– ADD UCELLALGOSWITCH NBMDlCacAlgoSelSwitch admission control
algorithm
The logicalincell
Constant theID uniquely
– ADD UCELLADAPTRACH CellId identifies a of
calculation cellinitial
in a UEradio
network. power for the
transmit
optimized random access
Maximum
procedure.number of times
This constant
– ADD UCELLADAPTRACH OptiConstantvalue the PRACH preambles can
is used when the
be retransmitted
congestion threshold forfor the
optimized
acknowledgedrandom access
random
procedure. This parameter
– ADD UCELLADAPTRACH OptiPreambleRetransMax accesses is reached and
is usedload
uplink when the
is heavy.
congestion threshold for
acknowledged random
accesses is reached and
uplink load is heavy.
08/24/2023 华为保密信息,未经授权禁止扩散 第371页，共633页
 686970386.xls 文档密级
Power increase step for
the optimized random
access procedure. This
parameter is used when
UM_RRCRELCMP_RLDE
– ADD UCELLADAPTRACH OptiPowerRampStep
the congestion threshold
L_DELAY_SWITCH (RL
for acknowledged
Indicates
Deletion Delaythe detectionrandom
Switch for
accesses
type, which
RRC CONNECTION is can
reached
be and
– STR RTWPRTTST TYPE uplink loadthe
CHANGE,
Indicates
RELEASE is test
heavy.
THRESHOLD,
COMPLETE
CHANGE_THRESHOLD,
duration.When
Messages) the test
AUTO.
time
1: Thisis over,
switchthe systemon.
is turned
automatically
The RNC startsstops
the the
timer
– STR RTWPRTTST TM
test and saves
for radio the test
link deletion if it
result. If Test
receives an RRC Duration is
set to 4294967295,
PROCESSSWITCH3.UM_ CONNECTION the
RELEASE
– SET URRCTRLSWITCH test is alwaysmessage.
RRCRELCMP_RLDEL_D COMPLETE performed.
ELAY_SWITCH After the timer has
expired, the RNC restarts
to delete radio
Indicates the IDlinks.
of the
– LST RTTST TID 0: This switch is turned off.
task.
The RNC immediately
starts to delete radio links
if it receives an RRC
CONNECTION RELEASE
COMPLETE message.

08/24/2023 华为保密信息,未经授权禁止扩散 第372页，共633页

 686970386.xls 文档密级

NE Version Operation Description MAE Value Range and Unit

Value Range:
Use this command to set the PC_BLER_TARGET_BASE_
RNC RAN16.0 and later connection-oriented algorithm CELLLOAD_SWITCH
switches of an BSC6900. Unit: None
The command is used to modify GUI Value Range: 0 to
NODEB RAN16.0 and later some of the properties of the local 268435455
cell. Unit: None
The command is used to modify
Value Range: FALSE, TRUE
NODEB RAN16.0 and later some of the properties of the local GUI Value Range:
Unit: None
NORMAL_CELL,
cell.
HALFFREQ_CELL,
The command is used to modify DIST_CELL,
NODEB RAN16.0 and later some of the properties of the local MULTIRRU_CELL,
cell. IMB_CELL,
MIXED_MULTIRRU_CELL
Use this command to modify the Unit: None
GUI Value Range: 0 to 65535
RNC RAN16.0 and later random access parameters of a
Unit: None
PRACH.
Use this command to modify the
GUI Value Range: 0 to 255
RNC RAN16.0 and later random access parameters of a
Unit: None
PRACH.
Use this command to modify the
Value Range: -35 to -10
RNC RAN16.0 and later random access parameters of a
Unit: dB
PRACH.
Use this command to modify the
Value Range: 1 to 8
RNC RAN16.0 and later random access parameters of a
Unit: dB
PRACH.
Use this command to modify the
Value Range: 1 to 64
RNC RAN16.0 and later random access parameters of a
Unit: None
PRACH.
This command is used to set the GUI Value Range: 0 to
NODEB RAN16.0 and later algorithm parameters of a specific 268435455
cell or all cells. Unit: None
This command is used to set the
Value Range: OFF, ON
NODEB RAN16.0 and later algorithm parameters of a specific
Unit: None
cell or all cells.
Use this command to modify Cell-
GUI Value Range: 0 to 65535
RNC RAN16.0 and later Oriented HS-DPCCH power
Unit: None
control algorithm parameters.
Use this command to modify Cell- Value Range: D0, D2, D4, D8,
RNC RAN16.0 and later Oriented HS-DPCCH power D10, D20, D40, D80, D160
control algorithm parameters. Unit: ms
Use this command to modify Cell- Value Range: D0, D2, D4, D8,
RNC RAN16.0 and later Oriented HS-DPCCH power D10, D20, D40, D80, D160
control algorithm parameters. Unit: ms
Use this command to modify Cell- Value Range: D0, D2, D4, D8,
RNC RAN16.0 and later Oriented HS-DPCCH power D10, D20, D40, D80, D160
control algorithm parameters. Unit: ms
Use this command to add Cell-
GUI Value Range: 0 to 65535
RNC RAN16.0 and later Oriented HS-DPCCH power
Unit: None
control algorithm parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第373页，共633页

 686970386.xls 文档密级

Use this command to add Cell- Value Range: D0, D2, D4, D8,
RNC RAN16.0 and later Oriented HS-DPCCH power D10, D20, D40, D80, D160
control algorithm parameters. Unit: ms
Use this command to add Cell- Value Range: D0, D2, D4, D8,
RNC RAN16.0 and later Oriented HS-DPCCH power D10, D20, D40, D80, D160
control algorithm parameters. Unit: ms

Modify Cell Oriented CAC GUI Value Range: 0 to 65535

RNC RAN16.0 and later
Algorithm Parameters Unit: None

Modify Cell Oriented CAC Value Range: 0 to 621

RNC RAN16.0 and later
Algorithm Parameters Unit: 0.1dBm

Modify Cell Oriented CAC Value Range: OFF, ON

RNC RAN16.0 and later
Algorithm Parameters Unit: None

Value Range: 00:00:00 to

Modify Cell Oriented CAC
RNC RAN16.0 and later 23:59:59
Algorithm Parameters
Unit: None
Value Range: 00:00:00 to
Modify Cell Oriented CAC
RNC RAN16.0 and later 23:59:59
Algorithm Parameters
Unit: None

Modify Cell Oriented CAC Value Range: 1 to 6000

RNC RAN16.0 and later
Algorithm Parameters Unit: s

Modify Cell Oriented CAC Value Range: 0 to 100

RNC RAN16.0 and later
Algorithm Parameters Unit: %

Use this command to modify cell-

Value Range: 1 to 400
RNC RAN16.0 and later oriented Call Admission Control
Unit: 0.1dB
(CAC) algorithm parameters.
Use this command to modify cell-
Value Range: 1 to 100
RNC RAN16.0 and later oriented Call Admission Control
Unit: 0.1dBm
(CAC) algorithm parameters.
Use this command to modify cell-
Value Range: ON, OFF
RNC RAN16.0 and later oriented Call Admission Control
Unit: None
(CAC) algorithm parameters.

Use this command to modify GUI Value Range: 0 to 65535

RNC RAN16.0 and later
function control items in a cell. Unit: None
Value Range:
ADAPTIVE_RACH_SWITCH-
Use this command to modify 1 or
RNC RAN16.0 and later
function control items in a cell. ADAPTIVE_RACH_SWITCH-
0
Unit: None
Use this command to modify GUI Value Range: 0 to 65535
RNC RAN16.0 and later
algorithm switches of a cell. Unit: None
Value Range:
ACK_PRACH_PREAM_MEA
Use this command to modify S-1 or
RNC RAN16.0 and later
algorithm switches of a cell. ACK_PRACH_PREAM_MEA
S-0, ADAPTIVE_RACH-1 or
Use this command to modify ADAPTIVE_RACH-0
GUI Value Range: 0 to 65535
RNC RAN16.0 and later parameter Related to Adaptive
Unit: None
RACH.

08/24/2023 华为保密信息,未经授权禁止扩散 第374页，共633页

 686970386.xls 文档密级

Use this command to modify

Value Range: -35 to -10
RNC RAN16.0 and later parameter Related to Adaptive
Unit: dB
RACH.
Use this command to modify
Value Range: 1 to 64
RNC RAN16.0 and later parameter Related to Adaptive
Unit: None
RACH.
Use this command to modify
Value Range: 1 to 8
RNC RAN16.0 and later parameter Related to Adaptive
Unit: dB
RACH.

Use this command to modify the GUI Value Range: 0 to 62

NodeB RAN16.0 and later
RX channel of an RRU or RFU. Unit: None
GUI Value Range: 0 to 1, 4 to
Use this command to modify the 5, 7 to 8, 11 to 12, 14 to 15,
NodeB RAN16.0 and later
RX channel of an RRU or RFU. 40 to 254
Unit: None
GUI Value Range: 0 to 8, 16,
Use this command to modify the
NodeB RAN16.0 and later 18 to 19, 255
RX channel of an RRU or RFU.
Unit: None

Use this command to modify the Value Range: 0 to 60

NodeB RAN16.0 and later
RX channel of an RRU or RFU. Unit: 0.5dB

Use this command to modify the Value Range: 0 to 8

NodeB RAN16.0 and later
RX channel of an RRU or RFU. Unit: None

Use this command to add function GUI Value Range: 0 to 65535

RNC RAN16.0 and later
control items in a cell. Unit: None
Value Range:
ADAPTIVE_RACH_SWITCH-
Use this command to add function 1,
RNC RAN16.0 and later
control items in a cell. ADAPTIVE_RACH_SWITCH-
0
Unit: None
Use this command to add cell GUI Value Range: 0 to 65535
RNC RAN16.0 and later
algorithm switches. Unit: None
Value Range:
Use this command to add cell ACK_PRACH_PREAM_MEA
RNC RAN16.0 and later
algorithm switches. S-1,
ValueADAPTIVE_RACH-1
Range:
Unit: None
ALGORITHM_OFF,
ALGORITHM_FIRST,
Use this command to add cell
RNC RAN16.0 and later ALGORITHM_SECOND,
algorithm switches.
ALGORITHM_THIRD,
Value Range:
ALGORITHM_FOURTH
ALGORITHM_OFF,
Use this command to add cell Unit: None
ALGORITHM_FIRST,
RNC RAN16.0 and later
algorithm switches. ALGORITHM_SECOND,
ALGORITHM_THIRD
Use this command to add Unit: None
GUI Value Range: 0 to 65535
RNC RAN16.0 and later Parameters Related to Adaptive
Unit: None
RACH.
Use this command to add
Value Range: -35 to -10
RNC RAN16.0 and later Parameters Related to Adaptive
Unit: dB
RACH.
Use this command to add
Value Range: 1 to 64
RNC RAN16.0 and later Parameters Related to Adaptive
Unit: None
RACH.

08/24/2023 华为保密信息,未经授权禁止扩散 第375页，共633页

 686970386.xls 文档密级

Use this command to add

Value Range: 1 to 8
RNC RAN16.0 and later Parameters Related to Adaptive
Unit: dB
RACH.
GUI Value Range: CHANGE,
THRESHOLD,
Use this command to start the
NodeB RAN16.0 and later CHANGE_THRESHOLD,
routine test of RTWP.
AUTO
Unit: None
Value Range: 1 to
Use this command to start the
NodeB RAN16.0 and later 4320,4294967295
routine test of RTWP.
Unit: min
Value Range:
UM_RRCRELCMP_RLDEL_D
Use this command to set process ELAY_SWITCH: 1 or
RNC RAN16.0 and later
switches. UM_RRCRELCMP_RLDEL_D
ELAY_SWITCH: 0
Use this command to list the Unit: None
Value Range: 0 to
information about the specified or
NodeB RAN16.0 and later 4294967295
all routine tests that have been
Unit: None
started.

08/24/2023 华为保密信息,未经授权禁止扩散 第376页，共633页

 686970386.xls 文档密级

Parameter
Range-value Value Type
parameters:
include the parameters for
which the MAE calculates
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE
include
does notparameters
optimize thesuch as
values
CellId, IDTYPE,
of these parameters.MCC, and the
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE
include
does notparameters
optimize thesuch as
values
CellId, IDTYPE,
of these parameters.MCC, and the
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization values
or on NEs. parameters: according
Range-value
to algorithm requirements and
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization values
or on NEs. parameters: according
Range-value
to algorithm requirements and
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primary key and foreign
key parameters. The MAE
does not optimize the values
of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第377页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
which the MAE calculates
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization values
or on NEs. parameters: according
Range-value
to algorithm requirements and
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
Range-value parameters: and
to algorithm requirements
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does
whichnottheoptimize the values
MAE calculates
of these parameters.
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primary key and foreign
key parameters. The MAE
does not optimize the values
of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第378页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
which the MAE calculates
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization values
or on NEs. parameters: according
Range-value
to algorithm requirements and
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE
include
does notparameters
optimize thesuch as
values
CellId, IDTYPE,
of these parameters.MCC, and the
MOC primary key and foreign
Identity-related
key parameters.parameters:
The MAE
include
does notparameters
optimize thesuch as
values
CellId, IDTYPE,
of these parameters.MCC, and the
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does not
which theoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization values
or on NEs. parameters: according
Range-value
to algorithm requirements and
include
the value therange
parameters
of eachfor
which the MAE calculates
parameter on the MAE client
optimization
or on NEs. values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE and
client
the
or on NEs.
MOC primaryparameters:
Range-value key and foreign
key parameters.
include The MAE
the parameters for
does
whichnottheoptimize the values
MAE calculates
of these parameters.
optimization values according
Range-value parameters: and
to algorithm requirements
include
the value range of eachfor
the parameters
which the MAE
parameter calculates
on the MAE client
optimization
or on NEs. values according
to algorithm requirements and
the value range of each
parameter on the MAE client
or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第379页，共633页

 686970386.xls 文档密级
Range-value parameters:
include the parameters for
which the MAE calculates
optimization values according
to algorithm requirements
Identity-related parameters: and
the value
include range of each
parameters such as
Fixed-value
parameter
CellId, on
IDTYPE,parameters:
theMCC,
MAE andclient
the
include
or on NEs.
MOC the parameters for
primary key and foreign
which the MAE provides
key parameters. The MAE built-
in default values that are
does not optimize the values
displayed on the MAE client
of these parameters.
and can be modified
Range-value by users.
parameters:
The MAE
include thedelivers the fixed
parameters for
valuesthe
which of these parameters
MAE calculates
based on thevalues
optimization objectsaccording
that are
filtered
to according
algorithm to algorithm
requirements
Identity-related parameters: and
requirements.
the value
include range of each
parameters such as
parameter
CellId, on theMCC,
IDTYPE, MAE andclient
the
or on NEs.
MOC primary key and foreign
key parameters. The MAE
does not optimize the values
of these parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第380页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description

MOD
– CellId Unique ID of a cell. RNC
UCELLMULTIRABHOCOV

Ec/N0 Thres for

MOD
– CSPSMRABThd2DEcN0 Starting CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
RSCP Thres for
MOD
– CSPSMRABThd2DRSCP Starting CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
Ec/N0 Thres for
MOD
– CSPSMRABThd2FEcN0 Stopping CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
RSCP Thres for
MOD
– CSPSMRABThd2FRSCP Stopping CS+PS RNC
UCELLMULTIRABHOCOV
Measurement

MOD TargetFreqCSPSMRABThd CS+PS Target Freq

– RNC
UCELLMULTIRABHOCOV EcNo Trigger Ec/N0 Thres

MOD TargetFreqCSPSMRABThd CS+PS Target Freq

– RNC
UCELLMULTIRABHOCOV Rscp Trigger RSCP Thres

MOD
– UCELLINTERFREQHOCOV CellId Unique ID of a cell. RNC

MOD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2DEcN0 Measure Start Ec/No RNC
THD
MOD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2FEcN0 Measure Stop Ec/No RNC
THD
MOD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2DRSCP Measure Start RSCP RNC
THD
MOD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2FRSCP Measure Stop RSCP RNC
THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2DEcN0 Measure Start Ec/No RNC
THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2FEcN0 Measure Stop Ec/No RNC
THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2DRSCP Measure Start RSCP RNC
THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2FRSCP Measure Stop RSCP RNC
THD

08/24/2023 华为保密信息,未经授权禁止扩散 第381页，共633页

 686970386.xls 文档密级

MOD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2DEcN0 RNC
Start Ec/No THD

MOD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2FEcN0 RNC
Stop Ec/No THD

MOD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2DRSCP RNC
Start RSCP THD

MOD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2FRSCP RNC
Stop RSCP THD

MOD Inter-freq CS Target

– UCELLINTERFREQHOCOV TargetFreqCSThdEcN0 Frequency Trigger RNC
Ec/No THD
MOD Inter-freq CS Target
– UCELLINTERFREQHOCOV TargetFreqCSThdRscp Frequency Trigger RNC
RSCP THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV TargetFreqR99PsThdEcN0 Target Frequency RNC
Trigger Ec/No THD
MOD Inter-freq R99 PS
– UCELLINTERFREQHOCOV TargetFreqR99PsThdRscp Target Frequency RNC
Trigger RSCP THD
MOD Inter-freq HSPA
– UCELLINTERFREQHOCOV TargetFreqHThdEcN0 Target Frequency RNC
Trigger Ec/No THD
MOD Inter-freq HSPA
– UCELLINTERFREQHOCOV TargetFreqHThdRscp Target Frequency RNC
Trigger RSCP THD
MOD
– UCELLINTERRATHOCOV CellId Unique ID of a cell. RNC

MOD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2DEcN0 Measure Start Ec/No RNC
THD
MOD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2FEcN0 Measure Stop Ec/No RNC
THD
MOD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2DRSCP Measure Start RSCP RNC
THD
MOD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2FRSCP Measure Stop RSCP RNC
THD
MOD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2DEcN0 Measure Start Ec/No RNC
THD
MOD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2FEcN0 Measure Stop Ec/No RNC
THD

08/24/2023 华为保密信息,未经授权禁止扩散 第382页，共633页

 686970386.xls 文档密级

MOD Inter-RAT R99 PS

– UCELLINTERRATHOCOV InterRATR99PsThd2DRSCP Measure Start RSCP RNC
THD
MOD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2FRSCP Measure Stop RSCP RNC
THD
MOD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2DEcN0 Measure Start Ec/No RNC
THD
MOD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2FEcN0 Measure Stop Ec/No RNC
THD
MOD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2DRSCP Measure Start RSCP RNC
THD
MOD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2FRSCP Measure Stop RSCP RNC
THD

ADD
– CellId Unique ID of a cell. RNC
UCELLMULTIRABHOCOV

Ec/N0 Thres for

ADD
– CSPSMRABThd2DEcN0 Starting CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
RSCP Thres for
ADD
– CSPSMRABThd2DRSCP Starting CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
Ec/N0 Thres for
ADD
– CSPSMRABThd2FEcN0 Stopping CS+PS RNC
UCELLMULTIRABHOCOV
Measurement
RSCP Thres for
ADD
– CSPSMRABThd2FRSCP Stopping CS+PS RNC
UCELLMULTIRABHOCOV
Measurement

ADD TargetFreqCSPSMRABThd CS+PS Target Freq

– RNC
UCELLMULTIRABHOCOV EcNo Trigger Ec/N0 Thres

ADD TargetFreqCSPSMRABThd CS+PS Target Freq

– RNC
UCELLMULTIRABHOCOV Rscp Trigger RSCP Thres

ADD
– UCELLINTERFREQHOCOV CellId Unique ID of a cell. RNC

ADD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2DEcN0 Measure Start Ec/No RNC
THD
ADD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2FEcN0 Measure Stop Ec/No RNC
THD
ADD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2DRSCP Measure Start RSCP RNC
THD

08/24/2023 华为保密信息,未经授权禁止扩散 第383页，共633页

 686970386.xls 文档密级

ADD Inter-freq CS
– UCELLINTERFREQHOCOV InterFreqCSThd2FRSCP Measure Stop RSCP RNC
THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2DEcN0 Measure Start Ec/No RNC
THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2FEcN0 Measure Stop Ec/No RNC
THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2DRSCP Measure Start RSCP RNC
THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV InterFreqR99PsThd2FRSCP Measure Stop RSCP RNC
THD
ADD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2DEcN0 RNC
Start Ec/No THD

ADD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2FEcN0 RNC
Stop Ec/No THD

ADD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2DRSCP RNC
Start RSCP THD

ADD
Inter-freq H Measure
– UCELLINTERFREQHOCOV InterFreqHThd2FRSCP RNC
Stop RSCP THD

ADD Inter-freq CS Target

– UCELLINTERFREQHOCOV TargetFreqCSThdEcN0 Frequency Trigger RNC
Ec/No THD
ADD Inter-freq CS Target
– UCELLINTERFREQHOCOV TargetFreqCSThdRscp Frequency Trigger RNC
RSCP THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV TargetFreqR99PsThdEcN0 Target Frequency RNC
Trigger Ec/No THD
ADD Inter-freq R99 PS
– UCELLINTERFREQHOCOV TargetFreqR99PsThdRscp Target Frequency RNC
Trigger RSCP THD
ADD Inter-freq HSPA
– UCELLINTERFREQHOCOV TargetFreqHThdEcN0 Target Frequency RNC
Trigger Ec/No THD
ADD Inter-freq HSPA
– UCELLINTERFREQHOCOV TargetFreqHThdRscp Target Frequency RNC
Trigger RSCP THD
ADD
– UCELLINTERRATHOCOV CellId Unique ID of a cell. RNC

ADD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2DEcN0 Measure Start Ec/No RNC
THD

08/24/2023 华为保密信息,未经授权禁止扩散 第384页，共633页

 686970386.xls 文档密级

ADD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2FEcN0 Measure Stop Ec/No RNC
THD
ADD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2DRSCP Measure Start RSCP RNC
THD
ADD Inter-RAT CS
– UCELLINTERRATHOCOV InterRATCSThd2FRSCP Measure Stop RSCP RNC
THD
ADD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2DEcN0 Measure Start Ec/No RNC
THD
ADD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2FEcN0 Measure Stop Ec/No RNC
THD
ADD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2DRSCP Measure Start RSCP RNC
THD
ADD Inter-RAT R99 PS
– UCELLINTERRATHOCOV InterRATR99PsThd2FRSCP Measure Stop RSCP RNC
THD
ADD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2DEcN0 Measure Start Ec/No RNC
THD
ADD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2FEcN0 Measure Stop Ec/No RNC
THD
ADD Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2DRSCP Measure Start RSCP RNC
THD
ADD Threshold for inter-
Inter-RAT HSPA
– UCELLINTERRATHOCOV InterRATHThd2FRSCP RAT cell
Measure Stop RSCP RNC
measurements
THD in
SIB3 and SIB4.
When the quality
– MOD UCELLSELRESEL CellId Unique ID
(CPICH of a cell.
Ec/No RNC
measured by the UE)
of the serving cell is
lower than this
– MOD UCELLSELRESEL SsearchRat RNC
threshold plus the
value of Qqualmin
for the cell, inter-RAT
cell measurements
are started. When
this parameter is set
to 127, inter-RAT cell
measurements are
performed.

08/24/2023 华为保密信息,未经授权禁止扩散 第385页，共633页

 686970386.xls 文档密级

MAE Value Range

Version Operation Description
and Unit

Modify Cell-Level Handover GUI Value Range: 0

RAN16.0 and later Parameters Dedicated to CS and to 65535
PS Combined Services Unit: None
Modify Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
Modify Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
Modify Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
Modify Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
Modify Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
Modify Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
Modify Cell-Oriented Coverage-
GUI Value Range: 0
Based Inter-Frequency Handover
RAN16.0 and later to 65535
Measurement Algorithm
Unit: None
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第386页，共633页

 686970386.xls 文档密级

Modify Cell-Oriented Coverage-

Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
GUI Value Range: 0
Based Inter-RAT Handover
RAN16.0 and later to 65535
Measurement Algorithm
Unit: None
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第387页，共633页

 686970386.xls 文档密级

Modify Cell-Oriented Coverage-

Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
Modify Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Level Handover GUI Value Range: 0
RAN16.0 and later Parameters Dedicated to CS and to 65535
PS Combined Services Unit: None
ADD Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
ADD Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
ADD Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
ADD Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
ADD Cell-Level Handover
Value Range: -24 to 0
RAN16.0 and later Parameters Dedicated to CS and
Unit: dB
PS Combined Services
ADD Cell-Level Handover Value Range: -115 to
RAN16.0 and later Parameters Dedicated to CS and -25
PS Combined Services Unit: dBm
ADD Cell-Oriented Coverage-
GUI Value Range: 0
Based Inter-Frequency Handover
RAN16.0 and later to 65535
Measurement Algorithm
Unit: None
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第388页，共633页

 686970386.xls 文档密级

ADD Cell-Oriented Coverage-

Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-Frequency Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-Frequency Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
GUI Value Range: 0
Based Inter-RAT Handover
RAN16.0 and later to 65535
Measurement Algorithm
Unit: None
Parameters
ADD Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters

08/24/2023 华为保密信息,未经授权禁止扩散 第389页，共633页

 686970386.xls 文档密级

ADD Cell-Oriented Coverage-

Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Based Inter-RAT Handover Value Range: -24 to 0
RAN16.0 and later
Measurement Algorithm Unit: dB
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
ADD Cell-Oriented Coverage-
Value Range: -115 to
Based Inter-RAT Handover
RAN16.0 and later -25
Measurement Algorithm
Unit: dBm
Parameters
GUI Value Range: 0
Modify cell selection and
RAN16.0 and later to 65535
reselection information.
Unit: None
Value Range: -16 to
Modify cell selection and
RAN16.0 and later 10, 127
reselection information.
Unit: 2dB

08/24/2023 华为保密信息,未经授权禁止扩散 第390页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第391页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第392页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第393页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第394页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Range-value
range of eachparameters:
parameter oninclude the
the MAE
parameters for
client or on NEs.which the MAE
calculates optimization values according
to algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values according
to algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第395页，共633页

 686970386.xls 文档密级

Optimization Parameter
MML Command Parameter NE
Type Description
Indicates the local ID of
MOD
the cell. It uniquely
– INTERRATHOCOMMG LocalCellId eNodeB
identifies a cell within a
ROUP
BS.
Indicates the RSRP
MOD
threshold for inter-RAT
– INTERRATHOCOMMG InterRatHoA2ThdRsrp eNodeB
measurement event
ROUP
A2.
Indicates the RSRQ
MOD
threshold for inter-RAT
– INTERRATHOCOMMG InterRatHoA2ThdRsrQ eNodeB
measurement event
ROUP
A2.
Indicates the RSRP
MOD
threshold for inter-RAT
– INTERRATHOCOMMG InterRatHoA1ThdRsrp eNodeB
measurement event
ROUP
A1.
Indicates the RSRQ
MOD Indicates
threshold whether
for inter-RAT to
– INTERRATHOCOMMG InterRatHoA1ThdRsrQ configure
Indicates the
the eNodeB
measurement event
ROUP measurement triggering
A1.
Indicates the
threshold local ID of
for cell
the cell. It uniquely
reselection to inter-
– LST CELLRESEL LocalCellId eNodeB
identifies aor
frequency cell within a
inter-RAT
BS. this cell
cells. If the parameter
is set to NOT_CFG
reselection priority ofand a
SNonIntraSearchCfgIn
– LST CELLRESEL the QQualMinCfgInd
frequency or RAT is eNodeB
d
parameter
higher thanisthat set of to the
NOT_CFG,
Indicates
serving thethe UEID
local
frequency, theof
continuously
the
UEs cell. measures
It uniquely
always start inter-
– MOD CELLRESEL LocalCellId intra-frequency and a eNodeB
identifies
frequency aorcell within
inter-RAT
inter-RAT
BS.
measurements. cells, If the
regardless
cell reselectionof the signal
priority
– MOD CELLRESEL SNonIntraSearch Indicates
quality
of of the
a frequency theserving
RSRQ
is lower eNodeB
threshold
cell. or equal
than for starting
to that of
inter-frequency
the serving frequency or inter-
RAT measurements.
or if the cell reselection It
– MOD CELLRESEL SNonIntraSearchQ determines the
priority of an RAT is eNodeB
probability
lower than of triggering
that of the
cell reselection
serving frequency, to anthe
inter-frequency
UEs start inter- or inter-
RAT neighboring
frequency or inter-RATcell.
measurements only
when the value of Cell
selection RX level
value (dB) is lower than
or equal to the value of
this parameter.

08/24/2023 华为保密信息,未经授权禁止扩散 第396页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Modify Cell-Level Handover

GUI Value Range: 0 to 255
eRAN7.0 and later Parameters Dedicated to CS and PS
Unit: None
Combined Services
Use this command to modify a group
Value Range: -140 to -43
eRAN7.0 and later of common parameters related to inter-
Unit: dBm
RAT handover.
Use this command to modify a group
Value Range: -40 to -6
eRAN7.0 and later of common parameters related to inter-
Unit: 0.5dB
RAT handover.
Use this command to modify a group
Value Range: -140 to -43
eRAN7.0 and later of common parameters related to inter-
Unit: dBm
RAT handover.
Use this command to modify a group
Value Range: -40 to -6
eRAN7.0 and later of common parameters related to inter-
Unit: 0.5dB
RAT handover.

Use this command to list the GUI Value Range: 0 to 255

eRAN7.0 and later
parameters about cell reselection. Unit: None

Use this command to list the

eRAN7.0 and later NA
parameters about cell reselection.

Use this command to modify the GUI Value Range: 0 to 255

eRAN7.0 and later
parameters about cell reselection. Unit: None

Use this command to modify the Value Range: 0 to 31

eRAN7.0 and later
parameters about cell reselection. Unit: 2dB

Use this command to modify the Value Range: 0 to 31

eRAN7.0 and later
parameters about cell reselection. Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第397页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does
parameters for which the MAEof these
not optimize the values
parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range
Identity-related of each include
parameters:
parameter on
parameters the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters. The MAE
does not optimize theparameters:
Non-MAE-optimized values of these
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. The MAE
Identity-related obtains the
parameters: values
include
of these parameters
parameters from NEs.
such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize
parameters the the
for which values
MAEof these
parameters.
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第398页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description NE
Type

The minimum required quality

During Massive MOD
Qrxlevmin threshold corresponding to RNC
Event UCELLSELRESEL
CPICH RSCP.
Threshold for inter-RAT cell
During Massive MOD
SsearchRat measurements in SIB3 and RNC
Event UCELLSELRESEL
SIB4.
T381 is started after the RNC
MOD
During Massive NBMUlCacAlgoSelSwitc send message
Selection "RRC
of uplink power
UCELLALGOSWITC CONNECTION SETUP"(or RNC
Event h admission control algorithms.
H "CELL UPDATE CONFIRM"). If
MOD T381 expire and RNC does not
Before Massive Cell Downlink
receive Code Admission
"RRC CONNECTION
UCELLALGOSWITC DlSfAdmAlgoSwitch RNC
Event Optimization
SETUP Switch
COMPLETE"(or the
H
response of "CELL UPDATE
CONFIRM") and V381 is smaller
Before Massive SET
T381 than N381, RNC resend "RRC RNC
Event UCONNMODETIMER
CONNECTION SETUP"(or
"CELL UPDATE CONFIRM") and
The parameter
restart timer T381specifies the
and increase
Before Massive
MOD UCELLHSDPA HsPdschMinCodeNum minimum number of the
V381. If RNC receive "RRC HS- RNC
Event
PDSCH
CONNECTION codes. SETUP
SET COMPLETE"(or the response of
Before Massive Indicates
"CELL UPDATEthe Dynamic Code
CONFIRM"),
ULOCELLMACHSPA DYNCODESW NodeB
Event Switch.
T381 will be stopped. Default
RA
value is 600ms.
MOD
Before Massive Whether to enable the algorithms
UCELLALGOSWITC NBMCacAlgoSwitch RNC
Event related to cell service admission.
H
MOD
During Massive Whether to enable the algorithms
UCELLALGOSWITC NBMLdcAlgoSwitch RNC
Event related to cell load control.
H
SET Received signal code power
Before Massive
UCAMPSTRATFORM PrefCampRscpThd (RSCP) threshold for preferred RNC
Event
ASS camping.
Received energy per chip
SET
Before Massive divided by the power density in
UCAMPSTRATFORM PrefCampEcNoThd RNC
Event the band (Ec/No) threshold for
ASS
preferred camping.
SET Threshold for the number of
Before Massive
UCAMPSTRATFORM RrcConnSumThd RRC connection setup requests RNC
Event
ASS within 5 min in a cell.
SET Threshold for the number of
Before Massive
UCAMPSTRATFORM RrcRejByCongRatioThd RRC connection setup requests RNC
Event
ASS within 5 min
Threshold forintriggering
a cell. inter-
frequency cell reselections for
SET
Before Massive UEs in idle mode when the
UCAMPSTRATFORM IdleSintersearch RNC
Event network camping
Threshold for inter-strategy
or intra-is
ASS
changed from
frequency preferredcell
hierarchical camping
SET to random(HCS)
structure camping.cell reselection
Before Massive
UCAMPSTRATFORM SsearchHCS when the network camping RNC
Event
ASS strategy is changed from
preferred camping to random
SET camping.
Before Massive
UCAMPSTRATFORM RetryOptSwitch Retry Optimize Switch RNC
Event
ASS

08/24/2023 华为保密信息,未经授权禁止扩散 第399页，共633页

 686970386.xls 文档密级

Before Massive ADD/MOD

FuncSwitch2 Function Switch2 RNC
Event UCELLLICENSE

Before Massive MOD

RncId ID of an RNC RNC
Event UINTERFREQNCELL

Before Massive MOD

CellId Unique ID of a cell RNC
Event UINTERFREQNCELL

Before Massive MOD Unique RNC ID of a neighboring

NCellRncId RNC
Event UINTERFREQNCELL cell

Before Massive MOD

NCellId Unique ID of a neighboring cell RNC
Event UINTERFREQNCELL

Whether a neighboring cell is a

Before Massive MOD
BlindHoFlag candidate cell for blind RNC
Event UINTERFREQNCELL
handovers.

During Massive Indicates the subrack number of

DSP BRD SRN NodeB
Event the board.

During Massive Indicates the slot number of the

DSP BRD SN NodeB
Event board.

Indicates the Local Cell ID. The

Before Massive
DSP ULOCELLRES ULOCELLID local cell ID is unique for one NodeB
Event
NodeB.

During Massive Indicates the subrack number of

DSP CPUUSAGE SRN NodeB
Event the board.

During Massive Indicates

With the slot
Intelligent number
Access of the
Class
DSP CPUUSAGE SN NodeB
Event board.
Control, the RNC adds the
number of restricted access
ADD/MOD classes if cell resources are
During Massive Threshold
UCELLCONGACALG CongACSwitch congested.for cell resources
If cell congestionare RNC
Event with the RRC or RAB setup
O no longer congested, the RNC
request
reduces rejection
the number rate.ofWhen
restricted
ADD/MOD RRC
access or classes.
RAB setup request
During Massive
UCELLCONGACALG CongRejTrigThd rejection rate
Threshold for in a resource
cell cell is equal to RNC
Event
O or higher than
restoration with, the RNC
RRC regards
or RAB
the cellrequest
setup in question as being
rejection rate.
ADD/MOD congested.
During Massive When this threshold is not
UCELLCONGACALG CongRejRelThd RNC
Event exceeded,
Range the RNCaccess
of restricted regards the
O
cell in question
classes. Accessas not being
requests
ADD/MOD congested.
initiated by UEs of specific
During Massive
UCELLCONGACALG ACRstrctRange access classes specified by this RNC
Event
O parameter are rejected by the
RNC at the interval specified by
MOD ACPollPeriod.
During Massive Whether the PS domain of a cell
UCELLACCESSSTRI DomainType RNC
Event is blocked.
CT

During Massive
MOD UCELL PCPICHPower PCPICH Transmit Power RNC
Event

08/24/2023 华为保密信息,未经授权禁止扩散 第400页，共633页

 686970386.xls 文档密级

Maximum TX power of the

During Massive PCPICH in a cell. This parameter
MOD UPCPICHPWR MaxPCPICHPower RNC
Event defines the maximum coverage
area of a cell.
Minimum TX power of the
During Massive PCPICH in a cell. This parameter
MOD UPCPICHPWR MinPCPICHPower RNC
Event defines the minimum coverage
area of a cell.
Before Massive SET
PROCESSSWITCH Process switch RNC
Event URRCTRLSWITCH

Before Massive SET

PROCESSSWITCH2 Process Control Switch 2 RNC
Event URRCTRLSWITCH
The parameter is added to
SET trigger the load sharing when the
Before Massive UserPlnCpuSharingOutT
UUSERPLNSHAREP DSP CPU usage exceeds this RNC
Event hd
ARA threshold, thus achieving load
balance between subracks.
Before Massive SET
OptimizationSwitch Optimization Switch RNC
Event URRCTRLSWITCH

Before Massive Performance Enhancement

SET UCORRMPARA PerfEnhanceSwitch1 RNC
Event Switch 1

MOD
Before Massive RRC connection admission
UCELLALGOSWITC RRCCeCodeCacChoice RNC
Event control (CAC) mode.
H
Power threshold offset for RRC
Before Massive
MOD UCELLCAC RTRRCCacThdOffset connection admission control RNC
Event
(CAC) on real-time services.

Before Massive Power threshold offset for RRC

MOD UCELLCAC NRTRRCCacThdOffset RNC
Event CAC on non-real-time services.
Power threshold offset for RRC
Before Massive call admission control (CAC) on
MOD UCELLCAC OtherRRCCacThdOffset RNC
Event services other than real-time and
non-real-time services.
Before Massive
MOD UCELLCAC UlTotalEqUserNum UL total equivalent user number RNC
Event

Whether to preferentially send

Before Massive
SET UDPUCFGDATA PagingSwitch paging messages for CS RNC
Event
services.
Whether to activate the PS BE
Before Massive SET PsBERrcPreemptVulner
RRC preemption algorithm for a RNC
Event UQUEUEPREEMPT able
cell.

Before Massive Threshold for admitting an AMR

MOD UCELLCAC DlConvAMRThd RNC
Event voice service.

Before Massive Threshold for admitting a

MOD UCELLCAC DlHOThd RNC
Event handover service.

Threshold for admission based

Before Massive
MOD UCELLCAC DlCellTotalThd on the total downlink power RNC
Event
resources in HSDPA cells.

08/24/2023 华为保密信息,未经授权禁止扩散 第401页，共633页

 686970386.xls 文档密级

The downlink credit and code

Before Massive resource admission threshold
MOD UCELLCAC DlRRCCeCodeResvSf RNC
Event during the RRC connection setup
procedure.
The uplink credit admission
Before Massive
MOD UCELLCAC UlRRCCeResvSf threshold during the RRC RNC
Event
connection setup procedure.

Before Massive SET Preemption Enhancement

PreemptEnhSwitch RNC
Event UQUEUEPREEMPT Switch

Call shock control switch at SPU

Before Massive SET
CallShockCtrlSwitch subsystem level, NodeB level, or RNC
Event UCALLSHOCKCTRL
cell level.

Before Massive SET Whether E2E flow control is

WranFlowCtrlNodeBSw RNC
Event UCTRLPLNFCPARA enabled in the RAN system.

Before Massive SET Whether to start flow control on

RanCtrlFcSwitch RNC
Event UCTRLPLNFCPARA the control plane.

Before Massive SET

FunctionSwitch Function Switch RNC
Event URRCTRLSWITCH
Indicates the power congestion
SET admission switch. It controls
Before Massive
ULOCELLR99ALGPA PWRCNGCACSW whether the power congestion- NodeB
Event
RA based E2E flow control algorithm
takes effect.
Before Massive
MOD UCNDOMAIN CNDomainId Identifying the type of a CN. RNC
Event

Duration of a CQI feedback cycle

Before Massive ADD
CQIFbCk when the UE is in the single-RLS RNC
Event UCELLHSDPCCH
state.
Duration of a CQI feedback cycle
Before Massive ADD
CQIFbCkforSHO when the UE is in the multi-RLS RNC
Event UCELLHSDPCCH
state.
Timer for not releasing signaling
Before Massive
SET USTATETIMER IuPSRelNoRABTmr over the Iu-PS interface when no RNC
Event
PS RAB is set up.
Period of downlink TCP
measurement result that the
Before Massive
SET UDPB RptPeriod NodeB reports to the RNC in the RNC
Event
optimized downlink power
balancing algorithm.
Before Massive SET
PROCESSSWITCH3 Process Control Switch 3 RNC
Event URRCTRLSWITCH

SET
Before Massive Forwarding threshold of control
UCTRLPLNSHAREP CtrlPlnSharingOutThd RNC
Event plane load sharing.
ARA
SET
Before Massive The sharing offset should be
UCTRLPLNSHAREP CtrlPlnSharingOutOffset RNC
Event added to the target subrack.
ARA

Before Massive Reliability Switch, This parameter

SET UNBMPARA ReliabilitySwitch RNC
Event is an advanced parameter.

08/24/2023 华为保密信息,未经授权禁止扩散 第402页，共633页

 686970386.xls 文档密级

Traffic class which includes Best

Effort(BE) and PTT. BE services
Before Massive
SET UUSERGBR TrafficClass comprise interactive services, RNC
Event
background services, and IMS.

Before Massive Uplink GBR of the BE and PTT

SET UUSERGBR UlGBR RNC
Event services.

Before Massive Downlink GBR of the BE and

SET UUSERGBR DlGBR RNC
Event PTT services.

SET
Before Massive Dynamic resource allocation
UCORRMALGOSWIT DraSwitch RNC
Event switch group.
CH
This parameter specifies the rate
Before Massive
SET UFRC BeHsupa2msTtiRateThs threshold of 2ms TTI on the E- RNC
Event
DCH for HSUPA BE service.
This parameter specifies which
Before Massive
SET UFRC RetryCapability HSPA technologies can be RNC
Event
retried by UEs.

Before Massive
MOD TRMFACTOR FTI Activation factor table index. RNC
Event

Before Massive UMTS R99 PS interactive

MOD TRMFACTOR PSINTERDL RNC
Event service downlink activity factor.

Before Massive UMTS R99 PS interactive

MOD TRMFACTOR PSINTERUL RNC
Event service uplink activity factor.

Before Massive UMTS R99 PS background

MOD TRMFACTOR PSBKGDL RNC
Event service downlink activity factor.

Before Massive UMTS R99 PS background

MOD TRMFACTOR PSBKGUL RNC
Event service uplink activity factor.

Before Massive UMTS HSDPA interactive

MOD TRMFACTOR HDINTERDL RNC
Event service downlink activity factor.

Before Massive UMTS HSDPA background

MOD TRMFACTOR HDBKGDL RNC
Event service downlink activity factor.

Before Massive HSUPA interactive service uplink

MOD TRMFACTOR HUINTERUL RNC
Event activity factor.

Before Massive UMTS HSUPA background

MOD TRMFACTOR HUBKGUL RNC
Event service uplink activity factor.

Before Massive MOD

NodeBName Name of the NodeB. RNC
Event UNODEBALGOPARA

Before Massive MOD NodeBHsdpaMaxUserNu Maximum number of HSDPA

RNC
Event UNODEBALGOPARA m users allowed by the NodeB.

08/24/2023 华为保密信息,未经授权禁止扩散 第403页，共633页

 686970386.xls 文档密级

Before Massive MOD NodeBHsupaMaxUserNu Maximum number of HSUPA

RNC
Event UNODEBALGOPARA m users allowed by the NodeB.

Maximum number of users

Before Massive
MOD UCELLCAC MaxHsupaUserNum supported by the HSUPA RNC
Event
channel
This in a cell.specifies a
parameter
constant used at calculation of
Before Massive the initial transmit power of the
ADD UPRACHBASIC Constantvalue RNC
Event first preamble, to be used in the
random access procedure.
The maximum number of
Before Massive MOD
PreambleRetransMax preambles transmitted in a RNC
Event UPRACHUUPARAS
preamble ramping cycle.
The power ramp step of the
random access preambles
Before Massive
ADD UPRACHBASIC PowerRampStep transmitted before the UE RNC
Event
receives the acquisition indicator
in the random access process.
Before Massive MOD Uniquely identifying a PRACH in
PhyChId RNC
Event UPRACHUUPARAS a cell.
This parameter specifies a
constant used at calculation of
Before Massive MOD the initial transmit power of the
Constantvalue RNC
Event UPRACHUUPARAS first preamble, to be used in the
random access procedure.
The maximum number of
Before Massive MOD
PreambleRetransMax preambles transmitted in a RNC
Event UPRACHUUPARAS
preamble ramping cycle.
The power ramp step of the
random access preambles
Before Massive MOD
PowerRampStep transmitted before the UE RNC
Event UPRACHUUPARAS Wait timetheIE contained
receives acquisitioninindicator
the
RRC CONNECTION REJECT
in the random access process
message for a high-priority RRC
Before Massive
SET USTATETIMER RrcConnRejWaitTmr connection setup request, that is, RNC
Event Wait time IE contained in thea UE
the minimum time for which
RRC CONNECTION REJECT
must wait before it sends another
message for a low-priority
RRC connection RRC
setup request.
Before Massive
SET USTATETIMER LowRrcConnRejWaitTmr connection setup request, that is, RNC
Event Minimum leveltime
threshold of a UE
the minimum for which
UTRAN cell reselection. During
must wait before it sends another
SET the
RRCcell reselection
connection decision
setup from
request.
During Massive
GCELLCCUTRANSY FDDRSCPMIN a GSM cell to a FDD cell, this BSC
Event
S parameter is used to calculate
the RSCP threshold of the target
SET This
cell. parameter specifies one of
During Massive
GCELLCCUTRANSY FDDQMIN the parameters for FDD cell BSC
Event
S reselection.
Indicates the switch for
During Massive
ADD ULOCELL IRCSW interference rejection combining RNC
Event
(IRC).
Indicates the switch for
During Massive
MOD ULOCELL IRCSW interference rejection combining RNC
Event
(IRC).
SET
During Massive
UCORRMALGOSWIT PcSwitch Power Control Switch RNC
Event
CH
Whether to allow specific
SET
During Massive algorithms to preferentially use
UCHLQUALITYEVAL RscpEffectAlgoSwitch RNC
Event periodical reported RSCP
UATE
values.

08/24/2023 华为保密信息,未经授权禁止扩散 第404页，共633页

 686970386.xls 文档密级

Whether the pilot power offset

During Massive ADD
PilotPOOptiSwitch (PO) optimization algorithm RNC
Event UCELLPCSWITCH
takes effect.
Whether the pilot power offset
During Massive MOD
PilotPOOptiSwitch (PO) optimization algorithm RNC
Event UCELLPCSWITCH
takes effect.
ADD
During Massive Whether to enable the algorithms
UCELLALGOSWITC NBMLdcAlgoSwitch RNC
Event related
Specifiesto the
cell RSRP
load control.
above which
H
the UE performs cell reselection
MOD from the serving cell to a cell on
During Massive
UCELLNFREQPRIOI ThdToHigh the target frequency when the RNC
Event
NFO absolute priority level of the
target frequency is greater than
that of the serving cell.

08/24/2023 华为保密信息,未经授权禁止扩散 第405页，共633页

 686970386.xls 文档密级

Version Operation Description MAE Value Range and Unit

Modify cell selection and Value Range: -58 to -13

RAN16.0 and later
reselection information. Unit: 2dBm

Modify cell selection and Value Range: -16 to 10, 127

RAN16.0 and later
reselection information. Unit: 2dB

Use this command to Default Value:

RAN16.0 and later modify algorithm ALGORITHM_OFF
switches of a cell. Unit: None
Value Range:
Use this command to CS_SETUP_OPT_SWITCH
RAN16.0 and later modify algorithm Default Value:
switches of a cell. Value Range: D0, D100,
CS_SETUP_OPT_SWITCH-1
D200, D300, D400, D500,
Unit: None
Use this command to set D600, D700, D800, D900,
RAN16.0 and later UE timers and constants D1000, D1200, D1500,
in connected mode. D2000
Use this command to Default Value: D0
modify high speed Value Range: 1 to 15
Unit: ms
RAN16.0 and later downlink packet access Default Value: 1
(HSDPA) parameters of a Unit: None
cell.
The command is used to Value Range: OPEN, CLOSE
RAN16.0 and later modify the Mac-hs Default Value: OPEN
parameters. Unit: None
Value Range:
Use this command to RTWP_RESIST_DISTURB
RAN16.0 and later modify algorithm Default Value:
switches of a cell. RTWP_RESIST_DISTURB-1
Unit: None
Use this command to Value Range: UL_UU_OLC
RAN16.0 and later modify algorithm Default Value: UL_UU_OLC-0
switches of a cell. Unit: None
Use this command to set
the parameter related to Default Value: -10
RAN16.0 and later
camping policy switching Unit: dB
in case of heavy traffic.
Use this command to set
the parameter related to Default Value: -10
RAN16.0 and later
camping policy switching Unit: dB
in case of heavy traffic.
Use this command to set
Value Range: 1 to 65535
the parameter related to
RAN16.0 and later Default Value: 200
camping policy switching
Unit: None
in case of heavy traffic.
Use this command to set
Value Range: 0 to100
the parameter related to
RAN16.0 and later Default Value: 1
camping policy switching
Unit: %
in case of heavy traffic.
Use this command to set
the parameter related to Default Value: 6
RAN16.0 and later
camping policy switching Unit: 2dB
in case of heavy traffic.
Use this command to set
the parameter related to Default Value: 10
RAN16.0 and later
camping policy switching Unit: 2dB
in case of heavy traffic.
Use this command to set
the parameter related to Default Value: ON
RAN16.0 and later
camping policy switching Unit: None
in case of heavy traffic.

08/24/2023 华为保密信息,未经授权禁止扩散 第406页，共633页

 686970386.xls 文档密级
Value Range:
CAMPING_STRATEGY_SWI
Use this command to TCH
RAN16.0 and later modify function control Default Value:
items in a cell. CAMPING_STRATEGY_SWI
TCH-1
Use this command to add Unit: None
GUI Value Range: 0 to 4095
RAN16.0 and later an inter-frequency
Unit: None
neighboring cell.
Use this command to add
GUI Value Range: 0 to 65535
RAN16.0 and later an inter-frequency
Unit: None
neighboring cell.
Use this command to add
GUI Value Range: 0 to 4095
RAN16.0 and later an inter-frequency
Unit: None
neighboring cell.
Use this command to add
GUI Value Range: 0 to 65535
RAN16.0 and later an inter-frequency
Unit: None
neighboring cell.
Use this command to add
Default Value: TRUE
RAN16.0 and later an inter-frequency
Unit: None
neighboring cell.
GUI Value Range: 0 to 1, 4 to
Use this command to
5, 7 to 8, 11 to 12, 14 to 15,
RAN16.0 and later query the status of a
40 to 254
board.
Unit: None
Use command
The this command to to GUI Value Range: 0 to 8, 16,
is used
RAN16.0 and later status of a
query the resource 18 to 19
board.
distribution of a specified Unit: None
local cell or all local cells.
GUI Value Range: 0 to
That is, uplink baseband
RAN16.0 and later Use this command to 268435455
resources and downlink
query the CPU/DSP Unit: None
baseband resources are
usage of a board. After
allocated to which DSPs. GUI Value Range: 0 to 1, 4 to
the execution of this
RAN16.0 and later Use this command to of 5, 60 to 254
command, the usage
query the CPU/DSP Unit: None
the master CPU, slave
usage of a board.
CPU, and DSP (if any) isAfter
the execution of this
displayed. GUI Value Range: 0 to 8
RAN16.0 and later
command, the usage
Use this command to of Unit: None
the master CPU,
add/modify slave
cell-oriented
CPU, and DSP
information about(if any) is Value Range: OFF, ON
RAN16.0 and later displayed. Access Class Default Value: ON
Intelligent
Use this command to
Control. Unit: None
add/modify cell-oriented
information about Value Range: 0 to 100
RAN16.0 and later Intelligent Access Class Default Value: 30
Use this command to
Control. Unit: %
add/modify cell-oriented
information about Value Range: 0 to 100
RAN16.0 and later Intelligent Access Class Value DefaultRange:
Value: AC0,
10 AC1,
Use this
Control. command to AC2, AC3,
Unit: % AC4, AC5, AC6,
add/modify cell-oriented AC7, AC8, AC9, AC10, AC11,
information about AC12, AC13, AC14, AC15
RAN16.0 and later Use this command
Intelligent Access Classto Default Value: AC0-1&AC1-
modify
Control.the cell access 1&AC2-1&AC3-1&AC4-
Modify the basic
restriction information,
information of a cell, 1&AC5-1&AC6-1&AC7-
including cell status, cell Value Range: NoneBlk, PsBlk
1&AC8-1&AC9-1
RAN16.0 and later including Max transmit
reserved information and Default Value: PsBlk
power Unit: None
accessofcontrol
cell, Num of Unit: None
continuous
information.in sync ind,
Num of continuous out of
Value Range: -100 to 500
RAN16.0 and later sync ind, Radio link
Unit: 0.1dBm
failure timer Length, and
the transmit power of the
downlink common
channels such as PSCH,
SSCH, PCPICH and
08/24/2023 BCH 华为保密信息,未经授权禁止扩散 第407页，共633页
 If the intra-frequency load
balancing algorithm or
downlink-load-based
dynamic pilot power
If the intra-frequency
adjustment algorithm load
is 686970386.xls 文档密级
balancing algorithm
enabled for a cell in a or
downlink-load-based
power adjustment
dynamic
association pilot powerthe
group, GUI Value Range: -100 to
RAN16.0 and later adjustment
MAE modifies the pilotis
algorithm 500
enabled
power offor theacell
cellalong
in a Unit: 0.1dBm
power
with itsadjustment
maximum and
association
minimum P-CPICH group, the GUI Value Range: -100 to
RAN16.0 and later MAE modifies
transmit powers. the pilot 500
power of the cell
Use this command to along Unit: 0.1dBm
with its maximum and Value Range:
modify the power RNC_SHARE_SWITCH
minimum
Use P-CPICH
this command
information of a P- to set Default Value:
RAN16.0 and later transmit powers.
process
CPICH. switches. Value Range:
Use this command to RNC_SHARE_SWITCH-1
USRPLN_PRORATION_SHA
Unit: None
modify the power RED_ALO
Use this command
information of a P- to set
RAN16.0 Default Value:
process
Use this switches.
CPICH. command to set USRPLN_PRORATION_SHA
or modify the percentage RED_ALO-1
of user plane sharing Value
Value Range:
Range: P2D_SWITCH,
0 to 100
Unit: None
CS_SETUP_P2D_SWITCH,
RAN16.0 and later threshold and offset.It Default Value: 50
can also set the P2P_GTPU_NOT_CFG_SWI
Unit: %
percentage of the cpu TCH
Value Range:
overload threshold. to set Default
Use this command
Value: P2D_SWITCH-
PERFENH_FACH_CONG_D2
RAN16.0 and later 1,
process switches. IDLE_SWITCH,
Use this command to set CS_SETUP_P2D_SWITCH-
PERFENH_CS_TRIG_PS_P2
the connection-oriented 1,
D_ZERO_SWITCH
algorithm parameters of P2P_GTPU_NOT_CFG_SWI
RAN16.0 and later Default
TCH-1 Value:
an RNC.
PERFENH_FACH_CONG_D2
Unit: None
IDLE_SWITCH-1,
Value Range: LOOSE_CAC,
Use this command to PERFENH_CS_TRIG_PS_P2
STRICT_CAC
RAN16.0 and later modify algorithm D_ZERO_SWITCH-1
Default Value: STRICT_CAC
switches
Use of a cell. to
this command Unit: None
modify cell-oriented Call
Admission Control (CAC) Value Range: -100 to 100
RAN16.0 and later
algorithm parameters. Unit: %
Use this command to
modify cell-oriented Call
Admission Control (CAC) Value Range: -100 to 100
RAN16.0 and later
algorithm parameters. Unit: %
Use this command to
modify cell-oriented Call
Admission Control (CAC) Value Range: -100 to 100
RAN16.0 and later
algorithm parameters. Unit: %
Use this command to
modify cell-oriented Call
Value Range: 1 to 255
Admission Control (CAC)
RAN16.0 and later Default Value: 200
algorithm parameters.
Unit: None
Set DPU(Data Process Value Range: OFF, ON
RAN16.0 and later Unit) configuration Default Value: ON
parameters. Unit: None
Use this command to set
Value Range: OFF, ON
RNC-oriented queue
RAN16.0 and later Default Value: ON
preempt algorithm
Use this command to Unit: None
parameters
modify cell-oriented Call
Value Range: 0 to 100
Admission Control (CAC)
RAN16.0 and later Default Value: 89
algorithm parameters.
Use this command to Unit: %
modify cell-oriented Call
Value Range: 0 to 100
Admission Control (CAC)
RAN16.0 and later Default Value: 90
algorithm parameters.
Use this command to Unit: %
modify cell-oriented Call
Value Range: 0 to 100
Admission Control (CAC)
RAN16.0 and later Default Value: 90
algorithm parameters.
Unit: %

08/24/2023 华为保密信息,未经授权禁止扩散 第408页，共633页

 686970386.xls 文档密级
Use this command to
modify cell-oriented Call Value Range: SF4, SF8,
Admission Control (CAC) SF16, SF32, SF64, SF128,
RAN16.0 and later
algorithm parameters. SF256, SFOFF
Use this command to Unit: None
modify cell-oriented Call Value Range: SF4, SF8,
Admission Control (CAC) SF16, SF32, SF64, SF128,
RAN16.0 and later
algorithm parameters. SF256, SFOFF
Value Range:
Unit: None
PREEMPT_ENH_NODEB_P
Use this command to set
REEMPT_CE_SWITCH
RNC-oriented queue
RAN16.0 and later Default Value:
preempt algorithm
PREEMPT_ENH_NODEB_P
parameters Value Range:
Use this command to set REEMPT_CE_SWITCH-1
SYS_LEVEL_DYNAMIC
Unit: None
Call Attempts Per
RAN16.0 and later Default Value:
Second(CAPS) Control
Use this command to set SYS_LEVEL_DYNAMIC-1
Parameters.
the RNC-level control Unit: None
Value Range: ON, OFF
plane flow control
RAN16.0 and later Default Value: ON
parameters.
Use this command to set Unit: None
Value Range:
the RNC-level control
RAN_CTRLPLN_FC
plane flow control
RAN16.0 and later Default Value:
parameters. Value Range:
RAN_CTRLPLN_FC-1
RRC_CONN_STATE_TO_NO
Unit: None
DEB_SWITCH
Use this command to set
RAN16.0 and later Default Value:
process switches.
RRC_CONN_STATE_TO_NO
The command is used to DEB_SWITCH-1
set R99
Use this Algorithm
command to add Value Range: OFF, ON
Unit: None
RAN16.0 and later Parameters.
the specific Non Access Default Value: ON
Stratum (NAS) Unit: None
information and
GUI Value Range:
Discontinuous Reception
RAN16.0 and later CS_DOMAIN, PS_DOMAIN
(DRX) cycle length
Unit: None
coefficient of Core
Use this command
Network to add
(CN) domain. Value Range: D0, D2, D4, D8,
Cell-Oriented HS-
RAN16.0 and later D10, D20, D40, D80, D160
DPCCH power control
Unit: ms
algorithm parameters
Use this command to add
Value Range: D0, D2, D4, D8,
Cell-Oriented HS-
RAN16.0 and later D10, D20, D40, D80, D160
DPCCH power control
Unit: ms
algorithm parameters
Use this command to set
Value Range: 1 to 65535
RAN16.0 and later the state protection
Unit: s
timers of calling process.
Use this command to set Value Range:
RNC Downlink Power Value Range: 10 to 60000
FACH_DCCH_CONG_CTRL_
RAN16.0 and later
Balance (DPB) algorithm Unit: 10ms
SWITCH,
parameters. UM_RRCRELCMP_RLDEL_
Use this command to set
DELAY_SWITCH
process switches.
RAN16.0 and later Default Value:
FACH_DCCH_CONG_CTRL_
Use this command to set SWITCH-1,
Value Range: 0 to 100
UM_RRCRELCMP_RLDEL_
RNC-oriented control
RAN16.0 and later Default Value: 50
DELAY_SWITCH-1
plane RRC sharing
Unit: %
Unit: None
parameters.
Use this command to set
Value Range: 1 to 10
RNC-oriented control
RAN16.0 and later Use this command to set Default Value: 5
plane RRC sharing Value
the cell-oriented Unit: %Range:
parameters. RELIABILITY_RRC_RETRAN
algorithm parameters of
S_SWITCH
an RNC.
RAN16.0 and later Default Value:
RELIABILITY_RRC_RETRAN
S_SWITCH-1
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第409页，共633页

 The guaranteed bit rate
(GBR) of services cannot 686970386.xls 文档密级
be guaranteed in case of
limited coverage or GUI Value Range:
The guaranteed
severely limited bit rate INTERACTIVE,
RAN16.0 and later (GBR)
resourcesof services
such as cannot
Iub BACKGROUND,
be guaranteed
bandwidths, CEs, in case of IMSSIGNALLING, PTT
limited
downlink coverage or
codes, bit
downlink ValueNone
Range: D0, D8, D16,
The guaranteed
severely limited rate Unit:
D32, D64, D128, D144, D256,
power,
(GBR) and
of uplink power.
services
RAN16.0 and later resources such as cannot
Iub D384, Range:
Value D608, D1280,
D0, D8,D2048,
D16,
be guaranteed
bandwidths, in case of D2720, D5440
CEs, D32, D64, D128, D144, D256,
limited
downlink coverage or
codes, downlink Unit: Kbps
D384, D512, D768, D1024,
severely limited
power, and uplink power. D1536, D1800, D2048,
RAN16.0 and later resources such as Iub
D3600, D7200, D8640,
bandwidths,
Use CEs, to set Value Range:
this command D10100, D13900, D16000,
downlink
the codes, downlink DRA_BASE_ADM_CE_BE_T
connection-oriented D21000
TI_RECFG_SWITCH
power,
algorithmand uplink power.
switches of a
RAN16.0 and later Unit: Kbps
Default Value:
RNC.
Use this command to set DRA_BASE_ADM_CE_BE_T
Value Range: D8, D16, D32,
TI_RECFG_SWITCH-1
the RNC-Oriented
D64, D128, D144, D256,
Fundamental Resource Unit: None
RAN16.0 and later D384, D608, D1280, D2048,
Configuration
Use this command (FRC)to set
D2720
parameters.
the RNC-Oriented Unit: Kbps
Fundamental Resource Value Range: TTI_2MS
RAN16.0 and later Configuration (FRC) Default Value: TTI_2MS-0
parameters. Unit: None

Use this command to GUI Value Range: 0 to 33

RAN16.0 and later
modify a factor table. Unit: None

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to Value Range: 0 to 100

RAN16.0 and later
modify a factor table. Unit: %

Use this command to add GUI Value Range: 1 to

RAN16.0 and later NodeB-oriented algorithm 64characters
parameters. Unit: None
Use this command to add
Value Range: 0 to 9216
RAN16.0 and later NodeB-oriented algorithm
Unit: None
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第410页，共633页

 686970386.xls 文档密级

Use this command to add

Value Range: 0 to 9216
RAN16.0 and later NodeB-oriented algorithm
Unit: None
parameters.
Use this command to
modify cell-oriented Call
Admission Control (CAC) Value Range: 0 to 192
RAN16.0 and later
algorithm parameters. Unit: None

Use this command to add

Value Range: -35 to -10
RAN16.0 and later the basic information to a
Unit: dB
PRACH.
Use this command to add
Value Range: 1 to 64
RAN16.0 and later the basic information to a
Unit: None
PRACH.
Use this command to add Value Range: 1 to 8
RAN16.0 and later the basic information to a Default Value: 1
PRACH. Unit: dB
Use this command to
modify the random GUI Value Range: 0 to 255
RAN16.0 and later
access parameters of a Unit: None
PRACH.
Use this command to
modify the random Value Range: -35 to -10
RAN16.0 and later
access parameters of a Unit: dB
PRACH.
Use this command to
modify the random Value Range: 1 to 64
RAN16.0 and later
access parameters of a Unit: None
PRACH.
Use this command to
Value Range: 1 to 8
modify the random
RAN16.0 and later Default Value: 1
access parameters of a
Unit: dB
PRACH.
Use this command to set
Value Range: 0 to 15
RAN16.0 and later the state protection
Unit: s
timers of calling process.
Use this command to set
Value Range: 0 to 15
RAN16.0 and later the state protection
Unit: s
timers of calling process.
Use this command to set
call control UTRAN Value Range: 0 to 15
GBSS16.0 and later
system message Unit: 2dBm
parameters of a cell.
Use this command to set
call control UTRAN Value Range: 0 to 7
GBSS16.0 and later
system message Unit: dB
parameters of a cell.
Value Range: OFF(OFF),
The command is used to
RAN16.0 and later ON(ON)
add a local cell.
Unit: None
The command is used to
Value Range: OFF(OFF),
modify some of the
RAN16.0 and later ON(ON)
properties of the local
Unit: None
cell. GUI Value Range:
Use this command to set Value Range:
BASE_RSCP_BE_TTI_E2D_I
RAN16.0 and later the connection-oriented PC_HSUPA_DATA_CH_PO_
NITSEL_SWITCH,
algorithm switches of an ADAPTIVE_ADJ_SWITCH
BASE_RSCP_BE_TTI_E2D_
Unit: None
BSC6900.
RECFG_SWITCH,
Use this command to set
BASE_RSCP_RTWP_LITRE
RAN16.0 and later channel quality
TNUM_AUTOADJ_SWITCH,
evaluation parameters.
BASE_RSCP_UlR99_CQIPO
_SWITCH
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第411页，共633页

 Value Range:
INTRA_FREQUENCY_LDB,
PUC, UL_UU_LDR,
686970386.xls
DL_UU_LDR, UL_UU_OLC, 文档密级
DL_UU_OLC,
OLC_EVENTMEAS,
Use this command to add CELL_CODE_LDR,
Value Range: OFF, ON
RAN16.0 and later cell-level power control CELL_CREDIT_LDR,
Unit: None
switch. UL_INTRA_FREQUENCY_U
LB, UL_UU_CLB,
Use this command to Value Range: OFF, ON
DL_UU_CLB,
RAN16.0 and later modify cell-level power Unit: None
CELL_CODE_CLB,
control switch. CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_
Use this command to add PWR_ADJ_SWITCH,
RAN16.0 and later
cell algorithm switches. ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEA
Use this command to S,
Value Range: 0 to 31
RAN16.0 and later modify the reselection of CAMPING_STRATEGY_SWI
Unit:
TCH,2dB
4G to 3G.
INTERFREQ_HHO_IN_RTW
P_SWITCH,
ULACESS_COVER_IMPRV_
SWITCH,
RIM_UL_INTER_OPT_SWIT
CH,
RIM_UL_INTER_UPDATE_S
WITCH
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第412页，共633页

 686970386.xls 文档密级

Parameter Value Type

Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm
Fixed-valuerequirements
parameters:and the value
includes the
range of each
parameters forparameter
which the on MAE theprovides
MAE
client ordefault
built-in on NEs. values that cannot be
modified by users.
Fixed-value The MAE
parameters: delivers
include the the
fixed values for
parameters of these
which parameters
the MAE provides based
on the objects
built-in that arethat
default values filtered according
are displayed
to
onalgorithm
the MAE requirements.
client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The
Fixed-value MAE delivers
parameters: the fixed
includes the
values of these
parameters parameters
for which the MAE based on the
provides
objects default
built-in that arevalues
filteredthat
according
cannot beto
algorithmby
modified requirements.
users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users.
Fixed-value The MAE
parameters: delivers
include the the
fixed values for
parameters of these
which parameters
the MAE provides based
on the objects
built-in that arethat
default values filtered according
are displayed
to
onalgorithm
the MAE requirements.
client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The
Fixed-value MAE delivers
parameters: the fixed
includes the
values of these
parameters parameters
for which the MAE based on the
provides
objects default
built-in that arevalues
filteredthat
according
cannot beto
algorithmby
modified requirements.
users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
Fixed-value
fixed values parameters: includesbased
of these parameters the
parameters for which the MAE provides
on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modified by users. The MAE delivers the
fixed values of these parameters based
on the objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第413页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAEtheseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers the
fixed values of these
Identity-related parameters
parameters: based
include
on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
MCC, and therequirements.
MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of these include
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
parameters for which the MAE
values of these parameters based on the provides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements. and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according to displayed
on the MAE
algorithm client and can be modified
requirements.
by users. The MAE delivers the fixed
Range-value
values of these parameters:
parameters include
basedtheon the
parameters for which the MAE
objects that are filtered according calculates
to
optimization values according to
algorithm requirements.
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第414页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
Fixed-value parameters:The
foreign key parameters. includeMAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
Range-value
values of these parameters:
parameters include
basedtheon the
parameters for which the MAE
objects that are filtered according calculates
to
optimization values according to
algorithm requirements.
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
values of these parameters based on the
objects that are filtered according to
algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第415页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
values of these parameters based on the
objects that are filtered according to
algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第416页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Range-value
values of these parameters:
parameters include
basedthe
on the
parameters for which the MAE
objects that are filtered according calculates
to
optimization values according to
algorithm requirements.
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon the
parameters based
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
parameters such
client or on NEs. as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第417页，共633页

 686970386.xls 文档密级
Range-value parameters: include the
parameters for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize theparameters:
values of include
these the
parameters
parameters. for which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Range-value
values of these parameters:
parameters include
basedtheon the
parameters for which the MAE
objects that are filtered according calculates
to
optimization values according to
algorithm requirements.
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
algorithm requirements and the value
Range-value
range of eachparameters:
parameter on include the
the MAE
parameters for
client or on NEs. which the MAE calculates
optimization values according to
Fixed-value parameters:and
algorithm requirements include the
the value
parameters for which the MAE
range of each parameter on the MAE provides
built-in
client ordefault
on NEs. values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are
objects that are filtered according todisplayed
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on theprovides
built-in
objects default
that arevalues
filteredthat are displayed
according to
on
algorithm requirements. be modified
the MAE client and can
by users. The MAE delivers the fixed
values of these parameters based on the
objects that are filtered according to
algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第418页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE provides
values of these parameters based on the
built-in
objects default
that arevalues
filteredthat are displayed
according to
on the MAE client
algorithm requirements.and can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on the
built-in default values that are displayed
objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
by users. The MAE delivers the fixed
Range-value
values of these parameters:
parameters include
basedtheon the
parameters for which the MAE
objects that are filtered according calculates
to
optimization values according to
algorithm requirements.
algorithm requirements and the value
range of each parameter on the MAE
client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第419页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter Description
Type

Before
Massive DSP LICINFO FUNCTIONTYPE Indicates the function type.
Event
Before ndicates whether to enable
MOD
Massive IOptAlgoSwitch intelligent optimization
ENODEBALGOSWITCH
Event algorithms.
Before
Massive DSP CELL LocalCellId Indicates the local ID of the cell.
Event
During Indicates the number of the
Massive DSP BRDMFRINFO CN cabinet where the board is
Event located
During Indicates the subrack number of
Massive DSP BRDMFRINFO SRN the board.
Event
During Indicates the slot number of the
Massive DSP BRDMFRINFO SN board.
Event
Before Indicates the cell reselection
Massive MOD CELLRESEL CellReselPrioritypriority of the serving frequency.
Event 0 indicates the lowest priority.
Indicates whether to set the
Before measurement triggering
SNonIntraSearchC
Massive MOD CELLRESEL threshold for reselection to
fgInd
Event inter-frequency or inter-RAT
cells.
Indicates the measurement
Before
triggering threshold for
Massive MOD CELLRESEL SNonIntraSearch
reselection to inter-frequency or
Event
inter-RAT cells.
Before Indicates the hysteresis for cell
Massive MOD CELLRESEL Qhyst reselection when RSRP values
Event are used in the evaluation.
Before Indicates the cell reselection
MOD
Massive CellReselPriority
priority of the neighboring E-
EUTRANINTERNFREQ
Event UTRAN frequency.
Indicates whether to set the
Before
MOD CellReselPriorityCf reselection priority of the
Massive
EUTRANINTERNFREQ gInd neighboring E-UTRAN
Event
frequency.
Indicates the frequency-specific
Before
MOD offset for the neighboring E-
Massive QoffsetFreq
EUTRANINTERNFREQ UTRAN frequency that applies
Event
to UEs in idle mode.
Indicates the offset for the
Before MOD
inter-frequency neighboring cell,
Massive EUTRANINTERFREQNC CellQOffset
which is used in evaluation for
Event ELL
cell reselections.
Indicates the DL EARFCN of
Before
MOD the neighboring cell on the
Massive DlEarfcn
EUTRANINTERNFREQ neighboring E-UTRAN
Event
frequency.
During Indicates the preset proportion
MOD IdleMlbUERelease
Massive of UEs in idle mode in a
EUTRANINTERNFREQ Ratio
Event frequency.

08/24/2023 华为保密信息,未经授权禁止扩散 第420页，共633页

 686970386.xls 文档密级

Before Indicates whether to enable

MOD
Massive MlbAlgoSwitch mobility load balancing (MLB)
CELLALGOSWITCH
Event algorithms.
Indicates whether the
Before neighboring frequency of the
MOD
Massive MlbTargetInd serving frequency can be a
EUTRANINTERNFREQ
Event target frequency in load
balancing.the variable that
Indicates
Before
triggers a mobility load
Massive MOD CELLMLB MlbTriggerMode
balancing (MLB) procedure.
Event
Before Indicates the mode of inter-
InterFreqIdleMlbM
Massive MOD CELLMLB frequency idle mobility load
ode
Event balancing (MLB).
Indicates the type of UEs that
Before
InterFreqUeTrsfTy are transferred for inter-
Massive MOD CELLMLB
pe frequency load balancing
Event
(excludingthe
Indicates blind load balancing).
threshold of the
Before number of synchronized UEs for
InterFreqIdleMlbU
Massive MOD CELLMLB triggering inter-frequency load
eNumThd
Event balancing to transfer to-be-
released UEs.
Indicates the offset of the
Before
number of synchronized UEs for
Massive MOD CELLMLB MlbUeNumOffset
triggering inter-frequency load
Event
balancing.
Indicates the evaluation period
Before
InterFreqLoadEval for determining whether to
Massive MOD CELLMLB
Prd trigger inter-frequency load
Event
balancing.
Indicates the threshold of the
Before
InterFreqMlbUeNu number of synchronized UEs for
Massive MOD CELLMLB
mThd triggering inter-frequency load
Event
balancing.the proportion
Indicates
During threshold for determining
Massive MOD CELLMLB UeNumDiffThd whether a neighboring cell can
Event be a target
Indicates cell
the in load number
maximum
balancing.
of UEs that can be transferred
During
to inter-frequency neighboring
Massive MOD CELLMLB MlbMaxUeNum
cells within a load balancing
Event
period triggered
Indicates whether bythe
different
inter-
Before MOD factors. neighboring cell is
frequency
Massive EUTRANINTERFREQNC OverlapInd manually identified as a
Event ELL neighboring
Indicates cell overlapping
whether the servingthe
local E-UTRANitscell.
cell evaluates coverage
Before
MOD MlbAutoGroupSwit overlap with neighboring cells
Massive
CELLALGOSWITCH ch and adds or removes coverage
Event Indicates whether
overlap flags for thetoneighboring
allow an
additional
cells. measurement for
Before
MOD collecting more samples when
Massive AddedMeasCfg
CELLMLBAUTOGROUP the samples collected in the
Event
planned period are insufficient
During for automatic
Indicates grouping.
the number of the
Massive DSP BRD CN cabinet where the board is
Event located
During
Indicates the subrack number of
Massive DSP BRD SRN
the board.
Event
During
Indicates the slot number of the
Massive DSP BRD SN
board.
Event

08/24/2023 华为保密信息,未经授权禁止扩散 第421页，共633页

 686970386.xls 文档密级

During Indicates the number of the

Massive DSP CPUUSAGE CN cabinet where the board is
Event located
During
Indicates the subrack number of
Massive DSP CPUUSAGE SRN
the board.
Event
During
Indicates the slot number of the
Massive DSP CPUUSAGE SN
board.
Event
During Indicates whether to enable the
MOD
Massive DynDrxSwitch dynamic discontinuous
CELLALGOSWITCH
Event reception (DRX) feature.
During
Massive MOD DRX DrxAlgSwitch DRX switch.
Indicates the length of the UE
Event inactivity timer. If the eNodeB
detects that a UE has neither
During
MOD received nor sent data for a
Massive UeInactiveTimer
RRCCONNSTATETIMER duration exceeding the value of
Event
this parameter, the eNodeB
During releases the RRC connection
MOD Indicates
for the UE.the switch for the
Massive AcBarAlgoSwitch
CELLALGOSWITCH access barring algorithm.
Event
During
AcBarringInfoCfgI Indicates whether to configure
Massive MOD CELLACBAR
nd the access barring information.
Event
During Indicates whether to configure
AcBarringForMoD
Massive MOD CELLACBAR the access barring information
ataCfgInd
Event for mobile-originated calls.
During Indicates the access probability
AcBarringFactorFo
Massive MOD CELLACBAR factor for mobile-originated
rCall
Event calls.
During Indicates the average access
Massive MOD CELLACBAR AcBarTimeForCall barring duration for mobile-
Event originated calls.
During Indicates whether to configure
AcBarringForMoSi
Massive MOD CELLACBAR the access
Indicates thebarring
accessinformation
probability
gCfgInd
Event for signaling.
factor for signaling. Signaling
from a UE is granted access if
During
AcBarringFactorFo the random number generated
Massive MOD CELLACBAR
rSig by the UE is less than this
Event
access probability factor;
During otherwise,the
Indicates theaverage
access access
request is
Massive MOD CELLACBAR rejected.duration for signaling.
AcBarTimeForSig barring
Event Indicates the cell reference
signal power of each physical
During antenna. However, the cell
ReferenceSignalP
Massive MOD PDSCHCFG reference signal power
wr
Event delivered in SIB2 is that of each
logical antenna.
During Indicates the number of the
Massive DSP TXBRANCH CN cabinet where the board is
Event located.
During
Indicates the subrack number of
Massive DSP TXBRANCH SRN
the board.
Event

08/24/2023 华为保密信息,未经授权禁止扩散 第422页，共633页

 686970386.xls 文档密级

During
Indicates the slot number of the
Massive DSP TXBRANCH SN
board.
Event
During
Indicates the number of the TX
Massive DSP TXBRANCH TXNO
channel of the RRU or RFU.
Event
Indicates whether the eNodeB
Before
MOD UuMsgSimulSend simultaneously sends Uu
Massive
GLOBALPROCSWITCH Switch messages during security mode
Event
activation and reconfiguration.
Before MOD
Indicates the adaptive switch of
Massive CELLSRSADAPTIVECF SrsPeriodAdaptive
SRS period.
Indicates the switch used to
Event G
enable or disable change in the
During cell-specific SRS subframe
MOD
Massive SrsAlgoSwitch configuration (that is, the
CELLALGOSWITCH
Event adjustment on the setting of the
SrsSubframeCfg parameter).
Before Indicates the switches related to
MOD
Massive UlSchSwitch uplink (UL) scheduling in the
CELLALGOSWITCH
Event cell.
Indicates whether to enable
Before
MOD HoCommOptSwitc optimization on handover-
Massive
ENODEBALGOSWITCH h related common configurations
Event
and algorithms.
Before Indicates the duration of uplink
SmartPreAllocatio
Massive MOD CELLULSCHALGO smart preallocation triggered by
nDuration
Event downlink scheduling.
Before
MOD Indicates the switches related to
Massive DlSchSwitch
CELLALGOSWITCH DL scheduling in the cell.
Event
Before
MOD RlcPdcpParaGrou Indicates the ID of the
Massive
RLCPDCPPARAGROUP pId RLC/PDCP parameter group.
Event
Indicates the RLC transmission
Before
MOD mode. Only the AM and UM
Massive RlcMode
RLCPDCPPARAGROUP modes are available.
Event
Indicates whether to enable the
Before
MOD RlcParaAdaptSwit adaptive configuration of
Massive
RLCPDCPPARAGROUP ch parameters related to Radio
Event
Link Control (RLC).
Before Indicates whether to enable
MOD
Massive AnrSwitch Automatic Neighbor Relation
ENODEBALGOSWITCH
Event (ANR).
Indicates whether to enable
Before Uplink Coordinated Multiple
MOD
Massive UlCompSwitch Points Reception (UL CoMP) for
CELLALGOSWITCH
Event a cell.
During Indicates whether to apply
MOD
Massive IrcSwitch MRC/IRC adaptation to the
CELLALGOSWITCH
Event PUCCH/PRACH.
Indicates the type of adaptive
Before selection between beamforming
MOD BfMimoAdaptiveS
Massive and MIMO for a multi-antenna
CELLBFMIMOPARACFG witch
Event eNodeB.
Indicates the fixed beamforming
Before
MOD or MIMO transmission mode
Massive FixedBfMimoMode
CELLBFMIMOPARACFG configured for a multi-antenna
Event
eNodeB.

08/24/2023 华为保密信息,未经授权禁止扩散 第423页，共633页

 686970386.xls 文档密级

Before Indicates the type of adaptive

MOD MimoAdaptiveSwit
Massive MIMO for a multi-antenna
CELLMIMOPARACFG ch
Event eNodeB.
Indicates the fixed MIMO
Before
MOD transmission mode configured
Massive FixedMimoMode
CELLMIMOPARACFG by a multi-antenna eNodeB for
Event
UEs.
Indicates the MIMO
Before
MOD transmission mode used during
Massive InitialMimoType
CELLMIMOPARACFG initial network access.
Event
Before
MOD Indicates the length of the
Massive DiscardTimer
RLCPDCPPARAGROUP PDCP discard timer.
Event
Before Indicates the adaptive strategy
PDCCHAggLvlAda
Massive MOD CELLPDCCHALGO of the PDCCH aggregation
ptStrage
Event level.
Indicates whether to enable the
Before mechanism of increasing the
UlPdcchAllocImpr
Massive MOD CELLPDCCHALGO control channel element (CCE)
oveSwitch
Event resource allocation success rate
in the uplink.
Before Indicates whether the eNodeB
MOD PucchIRCEnhanc
Massive determines interference
CELLALGOSWITCH e
Event strength.
Indicates whether to enable
Before
MOD HighLoadNetOptS network performance
Massive
ENODEBALGOSWITCH witch optimization when the network
Event
is heavily loaded.
Before
PdcchMaxCodeRa Indicates the maximum coding
Massive MOD CELLPDCCHALGO
te rate on the PDCCH.
Event Indicates the SRS power control
algorithm, which can be SINR-
Before
based SRS power control
Massive MOD CELLPCALGO SrsPcStrategy Indicates orthethe
traffic
algorithm SRSvolume
power
Event threshold of a bearer above
control algorithm based on the
which the bearer
converged SINR andis determined
RSRP.
Before
DataThdInPdcchP as a bearer with large packets
Massive MOD CELLDLSCHALGO
dschBal in the PDCCH
Indicates and PDSCH
the threshold for the
Event
resourceofallocation
number synchronizedoptimization
UEs in
Before mechanism
a cell above when
whichtraffic is
the PDCCH
UeNumThdInPdcc heavy.
Massive MOD CELLDLSCHALGO and PDSCH resource allocation
hPdschBal
Event optimization mechanism is
Indicates
activated whether to increase
in large traffic volume
Before the scheduling
scenarios. request indicator
SriFalseDetThdSw
Massive MOD CELLULSCHALGO (SRI) false detection threshold
itch
Event for UEs in the discontinuous
reception the
Indicates (DRX)ID ofstate.
the
Before
MOD IntraFreqHoGroupI parameter group related to
Massive
INTRAFREQHOGROUP d intra-frequency handover.
Event
Before Indicates the hysteresis for
MOD IntraFreqHoA3Hys
Massive intra-frequency handover event
INTRAFREQHOGROUP t
Event A3.
Before
MOD IntraFreqHoA3Offs Indicates the offset for event
Massive
INTRAFREQHOGROUP et A3.
Event
Before
Indicates whether to enable CQI
Massive MOD CQIADAPTIVECFG CqiPeriodAdaptive
reporting period adaptation.
Event

08/24/2023 华为保密信息,未经授权禁止扩散 第424页，共633页

 686970386.xls 文档密级

Before
MOD Indicates whether to enable CQI
Massive CqiPeriodAdaptive
CELLCQIADAPTIVECFG reporting period adaptation.
Event
Before
Indicates the period of power
Massive MOD CELLPCALGO PucchPcPeriod
control for the PUCCH.
Event
Before Indicates the switches used to
MOD
Massive UlPcAlgoSwitch enable or disable power control
CELLALGOSWITCH
Event for the PUSCH or PUCCH.
Indicates whether to enable
Before Uplink Coordinated Multiple
MOD
Massive UplinkCompSwitch Points Reception (UL CoMP) for
CELLALGOSWITCH
Event a cell.
Indicates the interval between
Before
periodic measurement reports
Massive MOD CELLMCPARA ReportAmount
that are sent after event A3 or
Event
A6 is triggered.
Before
MOD Indicates the offset for UL
Massive UlCompA3Offset
CELLULCOMPALGO CoMP event A3.
Event
Before
PdcchCapacityImp Indicates whether to optimize
Massive MOD CELLPDCCHALGO
roveSwitch PDCCH capacity expansion.
Event
Indicates the aperiodic CQI
Before
MOD HoAperiodicCqiCf resource configurations and the
Massive
CELLCQIADAPTIVECFG gSwitch triggering condition of aperiodic
Event Indicates the duration within
CQI reporting during handovers.
which the eNodeB performs
Before
downlink scheduling based on a
Massive MOD CELLDLSCHALGO HoStaticMcsTimer
low modulation and coding
Event
scheme (MCS) order in
Before handovers.
MOD
Massive CqiAdjAlgoSwitch CQI Adjust Algorithm Switch
CELLALGOSWITCH
Event
During
Specifies the reselection
Massive MOD UTRANNFREQ ThreshXLow
threshold.
Event
Before Indicates the preset proportion
MOD IdleMlbUERelease
Massive of UEs in idle mode in a
EUTRANINTERNFREQ Ratio
Event frequency.
During
MOD Indicates the switches related to
Massive DlSchSwitch
CELLALGOSWITCH DL scheduling in the cell.
Event
During Indicates the switches related to
MOD
Massive UlSchSwitch uplink (UL) scheduling in the
CELLALGOSWITCH
Event cell.
During
Massive MOD CELLDRXPARA DRXALGSWITCH Indicates whether to enable DRX
Event
Indicates whether to enable
During
MOD HoCommOptSwitc optimization on handover-
Massive
ENODEBALGOSWITCH h related common configurations
Event
and algorithms.
During
MOD Indicates whether to enable CQI
Massive CqiPeriodAdaptive
CELLCQIADAPTIVECFG reporting period adaptation.
Event

08/24/2023 华为保密信息,未经授权禁止扩散 第425页，共633页

 686970386.xls 文档密级

During MOD
Indicates the adaptive switch of
Massive CELLSRSADAPTIVECF SrsPeriodAdaptive
SRS period.
Event G

08/24/2023 华为保密信息,未经授权禁止扩散 第426页，共633页

 686970386.xls 文档密级

NE Version Operation Description MAE Value Range and Unit

eNodeB(TDD/ Use this command to query the GUI Value Range: eNodeB
eRAN7.0 and later
FDD LTE) license sale information. Unit: None

Use this command to modify the Value Range: ACHSwitch

eNodeB(TDD/
eRAN8.0 and later configuration of eNodeB-level Default Value: ACHSwitch-1
FDD LTE)
algorithm switches. Unit: None

eNodeB(TDD/ Use this command to list the dynamic GUI Value Range: 0 to 255
eRAN7.0 and later
FDD LTE) information about a cell. Unit: None

Use this command to query the

eNodeB(TDD/ GUI Value Range: 0 to 62
eRAN7.0 and later manufacturing information about a
FDD LTE) Unit: None
board.
GUI Value Range: 0 to 1, 4 to
Use this command to query the
eNodeB(TDD/ 5, 7 to 8, 11 to 12, 14 to 15, 40
eRAN7.0 and later manufacturing information about a
FDD LTE) to 254
board.
Unit: None
Use this command to query the GUI Value Range: 0 to 8, 16,
eNodeB(TDD/
eRAN7.0 and later manufacturing information about a 18 to 19, 255
FDD LTE)
board. Unit: None

eNodeB(TDD/ Use this command to modify the Value Range: 0 to 7

eRAN7.0 and later
FDD LTE) parameters about cell reselection Unit: None

eNodeB(TDD/ Use this command to modify the Default Value: CFG

eRAN7.0 and later
FDD LTE) parameters about cell reselection Unit:
ValueNone
Range: DB0_Q_HYST,
DB1_Q_HYST, DB2_Q_HYST,
eNodeB(TDD/ Use this command to modify the DB3_Q_HYST,
Value Range: 0 DB4_Q_HYST,
to 31
eRAN7.0 and later DB5_Q_HYST, DB6_Q_HYST,
FDD LTE) parameters about cell reselection Unit: 2dB
DB8_Q_HYST,
DB10_Q_HYST,
eNodeB(TDD/ Use this command to modify the DB12_Q_HYST,
eRAN7.0 and later
FDD LTE) parameters about cell reselection DB14_Q_HYST,
Use this command to modify the DB16_Q_HYST,
configuration of a neighboring E- DB18_Q_HYST,
eNodeB(TDD/ Value Range: 0 to 7
DB20_Q_HYST,
eRAN7.0 and later UTRAN frequency.
FDD LTE) Unit: None
DB22_Q_HYST,
Use this command to modify the DB24_Q_HYST
configuration of a neighboring E- Unit: None
eNodeB(TDD/ Default Value: CFG
eRAN7.0 and later UTRAN frequency. Value Range: dB-24, dB-22,
FDD LTE) Unit: None
dB-20, dB-18, dB-16, dB-14,
Use this command to modify the
dB-12, dB-10, dB-8, dB-6, dB-
configuration of a neighboring E-
eNodeB(TDD/ 5, dB-4, dB-3, dB-2, dB-1, dB0,
eRAN7.0 and later UTRAN frequency. Value Range:
FDD LTE) dB1, dB2, dB3,dB-24, dB-22,
dB4, dB5, dB6,
dB-20, dB-18, dB-16,
dB8, dB10, dB12, dB14, dB-14,
dB16,
dB-12, dB-10,dB22,
dB18, dB20, dB-8,dB24
dB-6, dB-
Use this command to modify the
eNodeB(TDD/ 5, dB-4,
Unit: dB dB-3, dB-2, dB-1, dB0,
eRAN7.0 and later neighboring relation with an inter-
FDD LTE) Use this command tocell.
modify the dB1, dB2, dB3, dB4, dB5, dB6,
frequency E-UTRAN
configuration of a neighboring E- dB8, dB10, dB12, dB14, dB16,
UTRAN frequency. dB18, Range:
Value dB20, dB22, dB24
0 to 46589,
eNodeB(TDD/ Unit: dBto 65535
eRAN7.0 and later 54436
FDD LTE) Use this command to modify the Unit: None
configuration of a neighboring E-
UTRAN frequency.
eNodeB(TDD/ Value Range: 0 to 100
eRAN7.0 and later
FDD LTE) Unit: %

08/24/2023 华为保密信息,未经授权禁止扩散 第427页，共633页

 686970386.xls 文档密级

Use this command to modify the

settings of cell-level algorithm Default Value:
eNodeB(TDD/
eRAN7.0 and later switches. InterFreqIdleMlbSwitch-1
FDD LTE)
Unit: None
Use this command to modify the
configuration of a neighboring E-
eNodeB(TDD/ Default Value: ALLOWED
eRAN7.0 and later UTRAN frequency.
FDD LTE) Unit: None

Use this command to modify the Default Value:

eNodeB(TDD/
eRAN7.0 and later configuration of the cell MLB UE_NUMBER_ONLY
FDD LTE)
algorithm. Unit: None
Use this command to modify the
eNodeB(TDD/ Default Value: Proportion-1
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Value Range:
Use this command to modify the SynchronizedUE, IdleUE,
eNodeB(TDD/
eRAN7.0 and later configuration of the cell MLB PrbMlbSynchronizedUE,
FDD LTE)
algorithm. PrbMlbIdleUE
Unit: None
Use this command to modify the
eNodeB(TDD/ Value Range: 1 to 10000
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Use this command to modify the
eNodeB(TDD/ Default Value: 20
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Use this command to modify the
eNodeB(TDD/ Value Range: 5 to 30
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: s
algorithm.
Use this command to modify the
eNodeB(TDD/ Value Range: 1 to 10000
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Use this command to modify the
eNodeB(TDD/ Value Range: 0 to 100
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Use this command to modify the
eNodeB(TDD/ Value Range: 1 to 20
eRAN7.0 and later configuration of the cell MLB
FDD LTE) Unit: None
algorithm.
Use this command to modify the
eNodeB(TDD/ Default Value: YES
eRAN7.0 and later neighboring relation with an inter-
FDD LTE) Unit: None
frequency E-UTRAN cell.
Use this command to modify the Default Value:
eNodeB(TDD/ eRAN11.0 and
settings of cell-level algorithm OverlapIndAutoSwitch-1
FDD LTE) later
switches. Unit: None
Use this command to modify Default Value:
eNodeB(TDD/ eRAN11.0 and
automatic grouping information for NOT_ALLOWED
FDD LTE) later
MLB between cells. Unit: None

eNodeB(TDD/ Use this command to query the GUI Value Range: 0 to 62

eRAN7.0 and later
FDD LTE) status of a board. Unit: None
GUI Value Range: 0 to 1, 4 to
eNodeB(TDD/ Use this command to query the 5, 7 to 8, 11 to 12, 14 to 15, 40
eRAN7.0 and later
FDD LTE) status of a board. to 254
Unit: None
GUI Value Range: 0 to 8, 16,
eNodeB(TDD/ Use this command to query the
eRAN7.0 and later 18 to 19
FDD LTE) status of a board.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第428页，共633页

 686970386.xls 文档密级

Use this command to query the

CPU/DSP usage of a board. After the
eNodeB(TDD/ GUI Value Range: 0 to 62
eRAN7.0 and later execution of this command, the
FDD LTE) Unit: None
usage of the master CPU, slave CPU,
Use this command
and DSP (if any) is to query the
displayed.
CPU/DSP usage of a board. After the GUI Value Range: 0 to 1, 4 to
eNodeB(TDD/
eRAN7.0 and later execution of this command, the 5, 60 to 254
FDD LTE)
usage of the master CPU, slave CPU, Unit: None
Use this command
and DSP (if any) is to query the
displayed.
CPU/DSP usage of a board. After the
eNodeB(TDD/ GUI Value Range: 0 to 8
eRAN7.0 and later execution of this command, the
FDD LTE) Unit: None
usage of the master CPU, slave CPU,
and DSP (if any) is displayed.
Use this command to modify the
eNodeB(TDD/ Default Value: DynDrxSwitch-0
eRAN7.0 and later settings of cell-level algorithm
FDD LTE) Unit: None
switches.

eNodeB(TDD/ Use this command to modify the DRX Default Value: OFF
eRAN7.0 and later
FDD LTE) configuration. Unit: None

Use this command to modify the

eNodeB(TDD Value Range: 0 to 3600
eRAN7.0 and later parameters related to the timers of
LTE) Unit:
ValuesRange:
RRC connection control.
ACBAR_SWITCH_DYNAMIC,
Use this command to modify the ACBAR_SWITCH_STATIC,
eNodeB(TDD/
eRAN7.0 and later settings of cell-level algorithm ACBAR_SWITCH_DISABLE
FDD LTE)
switches. Default Value:
ACBAR_SWITCH_STATIC
eNodeB(TDD/ Use this command to modify the Unit:
Default None
Value: CFG
eRAN7.0 and later
FDD LTE) configuration of cell access barring. Unit:
ValueNone Range:
ACCESS_BARRING_TIME_S4
eNodeB(TDD/ Use this command to modify the ,Default Value: CFG
eRAN7.0 and later ACCESS_BARRING_TIME_S8
FDD LTE) configuration of cell access barring. Unit: None
,Value Range: P00, P05, P10,
ACCESS_BARRING_TIME_S1
P15, P20, P25, P30, P40, P50,
eNodeB(TDD/ Use this command to modify the 6,
eRAN7.0 and later P60, P70, P75, P80, P85, P90,
FDD LTE) configuration of cell access barring ACCESS_BARRING_TIME_S3
P95
2,
Unit: %
ACCESS_BARRING_TIME_S6
eNodeB(TDD/ Use this command to modify the
eRAN7.0 and later 4,
FDD LTE) configuration of cell access barring Value Range:
ACCESS_BARRING_TIME_S1
ACCESS_BARRING_TIME_S4
28,
eNodeB(TDD/ Use this command to modify the ,ACCESS_BARRING_TIME_S2
Default Value: CFG
eRAN7.0 and later ACCESS_BARRING_TIME_S8
56, None
FDD LTE) configuration of cell access barring Unit:
,Value
ACCESS_BARRING_TIME_S5
Range: P00, P05, P10,
ACCESS_BARRING_TIME_S1
12 P20, P25, P30, P40, P50,
P15,
eNodeB(TDD/ Use this command to modify the 6,
Default Value:
eRAN7.0 and later P60, P70, P75, P80, P85, P90,
FDD LTE) configuration of cell access barring ACCESS_BARRING_TIME_S3
ACCESS_BARRING_TIME_S4
P95
2,
Unit: s%
ACCESS_BARRING_TIME_S6
eNodeB(TDD/ Use this command to modify the
eRAN7.0 and later 4,
FDD LTE) configuration of cell access barring
ACCESS_BARRING_TIME_S1
28,
Value Range: -600 to 500,
ACCESS_BARRING_TIME_S2
eNodeB(TDD/ Use this command to modify the
eRAN7.0 and later 32767
56,
FDD LTE) PDSCH configuration.
Unit: 0.1dBm
ACCESS_BARRING_TIME_S5
Use this command to query the 12
eNodeB(TDD/ GUI Value Range: 0 to 62
eRAN7.0 and later dynamic attributes of the TX channel Default Value:
FDD LTE) Unit: None
ACCESS_BARRING_TIME_S4
of the RRU or RFU.
Unit: s
Use this command to query the GUI Value Range: 4 to 5, 60 to
eNodeB(TDD/
eRAN7.0 and later dynamic attributes of the TX channel 254
FDD LTE)
of the RRU or RFU. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第429页，共633页

 686970386.xls 文档密级

Use this command to query the

eNodeB(TDD/ GUI Value Range: 0 to 8
eRAN7.0 and later dynamic attributes of the TX channel
FDD LTE) Unit: None
of the RRU or RFU.
Use this command to query the
eNodeB(TDD/ GUI Value Range: 0 to 8
eRAN7.0 and later dynamic attributes of the TX channel
FDD LTE) Unit: None
of the RRU or RFU.
Use this command to modify the Value Range: OFF, ON
eNodeB(TDD
eRAN7.0 and later settings of parameters related to Default Value: OFF
LTE)
some global functions in the eNodeB. Unit: None
Value Range: OFF, ON
eNodeB(FDD Use this command to modify the
eRAN8.1 and later Default Value: ON
LTE) adaptive switch of SRS period.
Unit: None
Value Range: PuschDtxSwitch,
Use this command to modify the SrsSubframeRecfSwitch
PreAllocationSwitch,
eNodeB(TDD/
eRAN7.0 and later settings of cell-level algorithm Default Value:
SmartPreAllocationSwitch,
FDD LTE)
switches. SrsSubframeRecfSwitch-1
UlEnhancedSrSchSwitch,
Unit: None
UlRaUserSchOptSw
Use this command to modify the
eNodeB(TDD/ Default Value:
eRAN7.0 and later settings of cell-level algorithm Value Range:
FDD LTE) PuschDtxSwitch-1,
switches. BasedSriGapOptSwitch,
Use this command to modify the PreAllocationSwitch-1,
L2UBasedHoPolicyPenaltySwit
SmartPreAllocationSwitch-1,
configuration of eNodeB-level
eNodeB(TDD/ ch, DrxBasedSriGapOptSwitch
UlEnhancedSrSchSwitch-1,
eRAN7.0 and later algorithm switches.
FDD LTE) Default Value:
UlRaUserSchOptSw-1
Use this command to modify the BasedSriGapOptSwitch-1,
Unit: None
configuration of the cell UL DrxBasedSriGapOptSwitch-1
Value Range: 0 to 2000
eNodeB(TDD Value Range:
Unit: None
eRAN7.0 and later scheduling algorithm. Default Value: 50
LTE) AperiodicCqiTrigOptSwitch,
Unit: ms
SubframeSchDiffSwitch,
Use this command to modify the NonGbrBundlingSwitch
eNodeB(TDD/
eRAN7.0 and later settings of cell-level algorithm Default Value:
FDD LTE)
switches. AperiodicCqiTrigOptSwitch-1,
SubframeSchDiffSwitch-1,
eNodeB(TDD/ Use this command to modify an NonGbrBundlingSwitch-1
GUI Value Range: 0 to 39
eRAN7.0 and later
FDD LTE) RLC/PDCP parameter group. Unit: None
Value Range: RlcMode_AM,
eNodeB(TDD/ Use this command to modify an RlcMode_UM
eRAN7.0 and later
FDD LTE) RLC/PDCP parameter group. Default Value: RlcMode_AM
Unit: None
Value
Value Range:
Range: OFF, ON
eNodeB(TDD/ Use this command to modify an IntraRatFastAnrSwitch,
eRAN7.0 and later Default Value: ON
FDD LTE) RLC/PDCP parameter group. UtranFastAnrSwitch,
Unit: None
Use this command to modify the GeranFastAnrSwitch,
configuration of eNodeB-level CdmaFastAnrSwitch
eNodeB(TDD/
eRAN7.0 and later algorithm switches. Default Value:
FDD LTE)
IntraRatFastAnrSwitch-0,
UtranFastAnrSwitch-0,
Value Range: DISABLE,
Use this command to modify the GeranFastAnrSwitch-0,
eNodeB(TDD eRAN7.0 and ENABLE
settings of cell-level algorithm CdmaFastAnrSwitch-0
LTE) eRAN8.0 Default Value: DISABLE
switches.
Unit: None
Value Range: PucchIrcSwitch
Use this command to modify the
eNodeB(TDD/ Default Value: PucchIrcSwitch-
eRAN7.0 and later settings of cell-level algorithm
FDD LTE) Use this command to modify the 1
switches.
parameters related to adaptive Unit: None
Value Range: NO_ADAPTIVE,
beamforming and MIMO TxD_BF_ADAPTIVE,
eNodeB(TDD
eRAN7.0 and later (BFMIMO).This command applies MIMO_BF_ADAPTIVE
LTE) Use
only this command
to LTE to modify the
TDD networks. Default Value: NO_ADAPTIVE
parameters related to adaptive Value Range: TM2, TM3, TM7,
Unit: None
beamforming and MIMO TM8, TM4, TM9w/oPMI,
eNodeB(TDD
eRAN7.0 and later (BFMIMO).This command applies TM9wPMI
LTE)
only to LTE TDD networks. Default Value: TM3
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第430页，共633页

 686970386.xls 文档密级
Value Range: NO_ADAPTIVE,
Use this command to modify the
OL_ADAPTIVE,
parameters related to cell MIMO
eNodeB(TDD CL_ADAPTIVE,
eRAN7.0 and later configuration.
LTE) OC_ADAPTIVE
Use this command to modify the Default Value: NO_ADAPTIVE
Value Range: TM2, TM3, TM4,
Unit: None
parameters related to cell MIMO
eNodeB(TDD TM6
eRAN7.0 and later configuration.
LTE) Default Value: TM3
Use this command to modify the Unit: None
parameters related to cell MIMO Value Range: TM2, ADAPTIVE
eNodeB(TDD
eRAN7.0 and later configuration. Default Value: ADAPTIVE
DiscardTimer_50,
LTE)
Unit: None
DiscardTimer_100,
DiscardTimer_150,
eNodeB(TDD/ Use this command to modify an DiscardTimer_300,
Value Range:
eRAN7.0 and later
FDD LTE) RLC/PDCP parameter group. DiscardTimer_500,
STRATEGYBASEDONCOVER
Use this command to modify the DiscardTimer_750,
AGE,
DiscardTimer_1500,
configuration of the PDCCH resource STRATEGYBASEDONCAPAC
eNodeB(TDD DiscardTimer_Infinity
eRAN8.0 and later allocation algorithm. ITY
LTE) Unit: msValue:
Default
Use this command to modify the Value Range:
STRATEGYBASEDONCAPAC
configuration of the PDCCH resource ReserveCommonCCESwitch
ITY
eNodeB(TDD
eRAN8.0 and later allocation algorithm. Default
Unit: NoneValue:
LTE)
ReserveCommonCCESwitch-1
Unit: None
Use this command to modify the Value Range: OFF, ON
eNodeB(TDD
eRAN8.0 and later settings of cell-level algorithm Default Value: ON
LTE) Value Range:
switches. Unit: None
SPECSIGRETRANSOPTSWIT
Use this command to modify the CH, FlowCtrlTriBackoffSwitch
eNodeB(TDD/
eRAN7.0 and later configuration of eNodeB-level Default Value:
FDD LTE)
algorithm switches. SPECSIGRETRANSOPTSWIT
Use this command to modify the CH-1
configuration of the PDCCH resource Value Range: 75 to 120
Unit: None
eNodeB(TDD
eRAN8.0 and later allocation algorithm. Default Value: 95
LTE)
Unit: None
Value Range:
Use this command to modify the
SRSPC_SINR_BASED,
settings of Cell Power Control
eNodeB(TDD SRSPC_SINR_RSRP_BASED
eRAN8.0 and later algorithm switches.
LTE) Default Value:
Use this command to modify the SRSPC_SINR_BASED
configuration of the cell DL Unit: None
Value Range: 0 to 1000000
eNodeB(TDD/
eRAN8.0 and later scheduling algorithm. Default Value: 17000
FDD LTE)
Unit: bit
Use this command to modify the
configuration of the cell DL Value Range: 0 to 10000
eNodeB(TDD/
eRAN8.0 and later scheduling algorithm. Default Value: 100
FDD LTE)
Unit: None
Use this command to modify the
configuration of the cell UL Value Range: OFF, ON
eNodeB(TDD
eRAN8.0 and later scheduling algorithm. Default Value: ON
LTE)
Unit: None
Use this command to modify a
eNodeB(TDD GUI Value Range: 0 to 9
eRAN8.0 and later parameter group related to intra-
LTE) Unit: None
frequency handover.
Use this command to modify a Value Range: 0 to 30
eNodeB(TDD
eRAN8.0 and later parameter group related to intra- Default Value: 4
LTE)
frequency handover. Unit: 0.5dB
Use this command to modify a Value Range: 0 to 30
eNodeB(TDD
eRAN8.0 and later parameter group related to intra- Default Value: 6
LTE)
frequency handover. Unit: 0.5dB
Use this command to modify the Value Range: OFF, ON
eNodeB(TDD/ eRAN7.X and
parameters related to CQI Default Value: ON
FDD LTE) eRAN8.0
adaptation. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第431页，共633页

 686970386.xls 文档密级

Use this command to modify the Value Range: OFF, ON

eNodeB(TDD/
eRAN8.0 and later parameters related to CQI Default Value: ON
FDD LTE)
adaptation. Unit: None
Use this command to modify the Value Range: 1 to 10
eNodeB(TDD/
eRAN8.0 and later settings of Cell Power Control Default Value: 1
FDD LTE)
algorithm switches. Unit: 20ms
Value Range:
Use this command to modify the PucchPcDtxSinrSwitch
eNodeB(TDD Value
eRAN8.0 and later settings of cell-level algorithm DefaultRange:
Value:
LTE) UlJointReceptionSwitch,
switches. PucchPcDtxSinrSwitch-1
UlJointReceptionPhaseIISwitch
Unit: None
Use this command to modify the , UlCompRollbackSwitch
eNodeB(FDD
eRAN8.0 and later settings of cell-level algorithm Default Value:
LTE)
switches. UlJointReceptionSwitch-1,
UlJointReceptionPhaseIISwitch
Value Range: r1, r2, r4, r8, r16,
Use this command to modify the -0,
eNodeB(FDD r32,UlCompRollbackSwitch-1
r64, Infinity
eRAN7.0 and later configurations of the measurement Unit: None
LTE) Default Value: r1
control parameters.
Unit: None
Use this command to modify the Value Range: -30 to 30
eNodeB(FDD
eRAN7.0 and later uplink coordinated multi-point (CoMP) Default Value: -10
LTE)
algorithm. Unit: 0.5dB
Use this command to modify the
configuration of the PDCCH resource Value Range: OFF, ON
eNodeB(FDD
eRAN8.0 and later allocation algorithm. Default Value: ON
LTE)
Unit: None
Use this command to modify the Value Range: OFF, ON
eNodeB(FDD
eRAN8.0 and later parameters related to CQI Default Value: ON
LTE)
adaptation. Unit: None
Use this command to modify the
configuration of the cell DL Value Range: 0 to 100
eNodeB(FDD
eRAN8.0 and later scheduling algorithm. Default Value: 10
LTE)
Unit: ms
Value Range:
Use this command to modify the CqiAdjAlgoSwitch
eNodeB(FDD
eRAN8.0 and later settings of cell-level algorithm Default Value:
LTE)
switches. CqiAdjAlgoSwitch-1
Unit: None
eNodeB(TDD/ Use this command to modify the Value Range: 0 to 31
eRAN7.0 and later
FDD LTE) reselection threshold of 4G to 3G. Unit: 2dB

Use this command to modify the Value Range: 0~100

eNodeB(TDD/ Value
eRAN7.0 and later configuration of a neighboring E- Unit: %Range:
FDD LTE) AperiodicCqiTrigOptSwitch,
UTRAN frequency.
SubframeSchDiffSwitch,
Value Range: PuschDtxSwitch,
Use this command to modify the NonGbrBundlingSwitch
PreAllocationSwitch,
eNodeB(TDD/
eRAN7.0 and later settings of cell-level algorithm Default Value:
SmartPreAllocationSwitch,
FDD LTE)
switches. AperiodicCqiTrigOptSwitch-1,
UlEnhancedSrSchSwitch,
SubframeSchDiffSwitch-1,
UlRaUserSchOptSw
Use this command to modify the NonGbrBundlingSwitch-1
eNodeB(TDD/ Default Value:
eRAN7.0 and later settings of cell-level algorithm Unit: None
FDD LTE) PuschDtxSwitch-1,
switches.
PreAllocationSwitch-1,
Value Range: OFF(Off),
SmartPreAllocationSwitch-1,
eNodeB(TDD/ Use this command to modify DRX ON(On)
UlEnhancedSrSchSwitch-1,
eRAN7.0 and later Value Range:
FDD LTE) parameters of a cell. Unit: None
UlRaUserSchOptSw-1
BasedSriGapOptSwitch,
Use this command to modify the Unit: None
L2UBasedHoPolicyPenaltySwit
configuration of eNodeB-level
eNodeB(TDD/ ch, DrxBasedSriGapOptSwitch
eRAN7.0 and later algorithm switches.
FDD LTE) Default Value:
BasedSriGapOptSwitch-1,
Use this command to modify the DrxBasedSriGapOptSwitch-1
Value Range: OFF, ON
eNodeB(TDD/ eRAN7.X and Unit: None
parameters related to CQI Default Value: ON
FDD LTE) eRAN8.0
adaptation. Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第432页，共633页

 686970386.xls 文档密级

Value Range: OFF, ON

eNodeB(FDD Use this command to modify the
eRAN8.1 and later Default Value: ON
LTE) adaptive switch of SRS period.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第433页，共633页

 686970386.xls 文档密级

Parameter Value Type

Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the
Fixed-value MOC primary
parameters: key and
include the
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthat
theseare
parameters.
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed
Identity-related values of these
parameters: include
basedasonCellId,
parameters such the objects
IDTYPE, that
are
MCC,filtered according
and the to algorithm
MOC primary key and
requirements.
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Range-value parameters:The MAE the
include
does not optimize
parameters the the
for which values
MAEof these
parameters.
calculates optimization values
according toparameters:
Fixed-value algorithm requirements
includes the
and the value
parameters forrange
whichofthe
each
MAE
parameter
provides on thedefault
built-in MAE client
values orthat
on
NEs.
cannot be modified by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
requirements.
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according toparameters:
Fixed-value algorithm requirements
includes the
and the value
parameters forrange
whichofthe
each
MAE
parameter on thedefault
provides built-in MAE client
values orthat
on
NEs.
cannot be modified by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
requirements.
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
and the value range of each
parameter on the MAE client or on
NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第434页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
requirements.
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according toparameters:
Fixed-value algorithm requirements
includes the
and the value
parameters forrange
whichofthe
each
MAE
parameter
provides on thedefault
built-in MAE client
values orthat
on
NEs.
cannot be modified by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
requirements.
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
according toparameters:
Fixed-value algorithm requirements
includes the
and the value
parameters forrange
whichofthe
each
MAE
parameter
provides on thedefault
built-in MAE client
values orthat
on
NEs.
cannot be modified by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
MAE delivers the fixed values of these
Identity-related
parameters based parameters: include
on the objects that
parameters such as CellId, IDTYPE,
are filtered according to algorithm
MCC, and the MOC primary key and
requirements.
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第435页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
Fixed-value parameters:The
foreign key parameters. includes
MAE the
parameters for which the MAE
does not optimize the values of these
provides
parameters.built-in default values that
cannot be modified by users. The
Fixed-value
MAE deliversparameters: includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
Fixed-value toparameters:
requirements.
according include the
algorithm requirements
parameters for which the
and the value range of each MAE
provides
parameter on the MAE client orthat
built-in default values on are
displayed
NEs. on the MAE client and can
be modified parameters:
Fixed-value by users. Theincludes
MAE the
delivers the for
parameters fixed values
which theof MAEthese
parameters
provides based
built-in on the
default objects
values that
that
are filtered
cannot according
be modified bytousers.
algorithm
The
Fixed-value
deliversparameters:
requirements.
MAE includes
the fixed values the
of these
parameters for which the MAE
parameters based on the objects that
provides built-in
are filtered default
according to values
algorithm that
cannot be modified
requirements. by users. The
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
Fixed-value toparameters:
requirements.
according include the
algorithm requirements
parameters for which the
and the value range of each MAE
provides
parameter on the MAE client orthat
built-in default values on are
displayed
NEs. on the MAE client and can
be modified parameters:
Fixed-value by users. Theincludes
MAE the
delivers the for
parameters fixed values
which theof MAEthese
parameters
provides based
built-in on the
default objects
values that
that
are filtered
cannot according
be modified bytousers.
algorithm
The
requirements.
MAE delivers parameters:
Range-value the fixed values of these
include the
parameters forbased on the
which the MAE
objects that
are filteredoptimization
calculates according tovalues
algorithm
Fixed-value toparameters:
requirements.
according include the
algorithm requirements
parameters for which the
and the value range of each MAE
provides
parameter on the MAE client orthat
built-in default values on are
displayed
NEs. on the MAE client and can
be modified by users. The MAE
Range-value parameters:
delivers the fixed values ofinclude
these the
parameters for which the MAE
parameters based on the objects that
calculates
are filteredoptimization
according tovalues
algorithm
according
requirements.algorithm requirements
to
and the value range
Identity-related of each include
parameters:
parameter
parameterson the as
such MAE client
CellId, or on
IDTYPE,
NEs. and the MOC primary key and
MCC,
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第436页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
Identity-related
does not optimize parameters:
the valuesinclude
of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the
Fixed-value MOC primary
parameters: key and
include the
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthat
these
are
parameters.
displayed on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed on the MAE client
are filtered according to algorithmand can
be modified by users. The MAE
requirements.
delivers the fixed
Identity-related values of these
parameters: include
basedasonCellId,
parameters such the objects
IDTYPE, that
are
MCC,filtered
Fixed-value according
and the to algorithm
MOC primary
parameters: key and
include the
requirements.
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthat
these
are
parameters.
displayed on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objectsthat are
that
displayed on the MAE client
are filtered according to algorithmand can
be modified by users. The MAE
requirements.
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第437页，共633页

Fixed-value parameters: include the 686970386.xls 文档密级
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed on the MAE client
are filtered according to algorithmand can
be modified by users. The MAE
requirements.
Range-value parameters:
delivers the fixed values ofinclude
these the
parameters for which the MAE
parameters based on the objects that
calculates
are filteredoptimization
according tovalues
algorithm
Fixed-value
according toparameters:
algorithm include the
requirements
requirements.
parameters for which the MAE
and the value range of each
provides
parameter on the MAE client orthat
built-in default values on are
displayed
NEs. on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters
delivers the for
fixedwhich theof
values MAE
these
provides built-in default values
parameters based on the objects that are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed on the MAE client
are filtered according to algorithmand can
be modified by users. The MAE
requirements.
delivers the fixed
Identity-related values of these
parameters: include
basedasonCellId,
parameters such the objects
IDTYPE,that
are
MCC,filtered
Fixed-value according
and the to algorithm
MOC primary
parameters: key and
include the
requirements.
foreign key parameters.
parameters for which theThe MAE MAE
does not built-in
provides optimize the values
default valuesofthat
these
are
parameters.
displayed on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed
are on the MAE client
filtered according to algorithmand can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the that
objects are
that
displayed on the MAE client
are filtered according to algorithmand can
be modified by users. The MAE
requirements.
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第438页，共633页

Fixed-value parameters: include the 686970386.xls 文档密级
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed on the MAE client
are filtered according to algorithm and can
be modified by users. The MAE
requirements.
Range-value parameters:
delivers the fixed values ofinclude
these the
parameters for which the MAE
parameters based on the objects that
calculates
are filteredoptimization
according tovalues
algorithm
according to
requirements. algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameters for which the MAE
parameter on the MAE client or on
calculates
NEs. optimization values
Fixed-value
according toparameters: include the
algorithm requirements
parameters for which the
and the value range of each MAE
provides
parameter built-in
on thedefault values
MAE client orthat
on are
displayed
NEs. on the MAE client and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
parameters
delivers the for
fixedwhich theof
values MAEthese
provides built-in default values
parameters based on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed
are on the MAE client
filtered according to algorithm and can
Fixed-value
be modified parameters:
by users. Theinclude
MAE the
requirements.
parameters for which the MAE
delivers the fixed values of these
provides
parameters built-in
based default values
on the objects that are
that
displayed on the MAE client
are filtered according to algorithm and can
be modified by users. The MAE
requirements.
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第439页，共633页

Fixed-value parameters: include the 686970386.xls 文档密级
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第440页，共633页

 RNC.
The RNC Thesupports
RNC
sends
a maximum the cell of ID to
the base station
5100 logical cells.
686970386.xls during
Logicalacells cell setup
are 文档密级
procedure.
uniquely butThe not
mapping
necessarily between
logical cell IDs and
consecutively
Optimization local cell IDs
Parameter
numbered are a
within
MML Command Parameter configured at the NE Version
Type Description
RNC. For example,
RNC.
you can set the ID
of a logical cell to 0
The RNCofsupports RAN16.0 and
Parameter check MOD UCELLRLPWR CellId and that another RNC
a later
logical cell toof2.
maximum
RlMaxDlPwr 5100 logical cells.
(CNDOMAINID=CS Maximum
Logical
For clearcells transmit
and are
easy RAN16.0 and
Parameter check MOD UCELLRLPWR _DOMAIN, power
uniquely of
identification, a
but not RNC
The logical cell ID later
MAXBITRATE=122 necessarily
downlink
adhere radio
the link.
toidentifies
RlMinDlPwr(CNDO
00) uniquely
MAINID=CS_DOM consecutively
following
Minimal
a cell in a transmit
radio
numbered RAN16.0 and
Parameter check MOD UCELLRLPWR AIN, numbering
power
network. a within a
of The RNC
later
MAXBITRATE=122 RNC. Forradio
principles:
downlink
logical
example,
cell ID islink.
00) you can set the ID
configured at the
MOD of a logical
Specify cell to 0
different
RNC. The RNC RAN16.0 and
Parameter check UCELLINTERFREQH CellId and
number that ranges
of another RNC
sends
The the cell
logical cell IDfor
to later
OCOV logical
logical cell
cells toin 2. ID
the base
uniquely station
identifies
Length
different
during ofsubracks.
thesetuptimer
MOD a
For
forcell inainter-
clear
the acell
radio
and easy RAN16.0 and
Parameter check UCELLINTERFREQH For example,
procedure.
InterFreqMeasTime network. The The you RNC
identification,
frequency
can specify the later
OCOV mapping
logical cell between
ID is
adhere
measurement
range to0the
logicalof
configured cell to
at 899
IDs and
the
MOD following
for the logical cells
local
Time
RNC. cell
delay
The IDs to
RNC are RAN16.0 and
Parameter check UCELLINTERFREQH TimeToTrig2D numbering
in subrack 0at(MPS) RNC
configured
trigger
sends event
the cell 2Dthe
ID to later
OCOV principles:
and the range of
RNC.
the base station
900
during to 1799
adifferent for
cell setup the
MOD Specify
logical
Time cells
delay
The RNC supports
procedure. in
to
The for RAN16.0 and
Parameter check UCELLINTERFREQH TimeToTrig2F number ranges RNC
subrack
trigger
a maximum
mapping 1between
event (EPS).
of2F later
OCOV Minimum
logical threshold
cells in
For
5100 detailed
logical logical
cell cells.
for RSCP
different
information ofIDsthe
subracks.
about
and
MOD Logical
local cell cells
IDs are
are
target
For
this example,
parameter, yousee RAN16.0 and
Parameter check UCELLINTERFREQH HHORSCPmin uniquely
configured butatnot the RNC
measurement
can
The
3GPP specify
logical
TS the
cell
25.401. orID later
OCOV necessarily
RNC.
handover
range
uniquely of 0 to 899
identifies
Cell-oriented
consecutively
frequency inter-
MOD for
a the
cell in logical
a radio cells
InterFreqReportMo numbered
frequency
The RNCThe within
supports a RAN16.0 and
Parameter check UCELLINTERFREQH in subrack
network. 0 (MPS) RNC
de measurement
RNC.
a maximumFor example, of later
OCOV and
logicalthemode.
range
cell ID isof
report
you
5100 can set the ID
900 tological
configured 1799atfor cells.
thethe
of a logical
Logical cells cell
are to 0
logicalThe
RNC. cellsRNC in RAN16.0 and
Parameter check MOD UFACH CellId and that of
uniquely another RNC
subrack
sends the 1butcellnot
(EPS). ID to later
logical
necessarily cell to 2.
For base
the
The detailed
offsetstation
between
consecutively
information
during
the a cell about
setup
For FACH
MaxFachPower(TR numberedclear and transmit
withineasy a RAN16.0 and
Parameter check MOD UFACH this parameter,
procedure.
power and The see
P- RNC
CHID=[4: 5]) identification,
RNC. For example, later
3GPP TS
mapping
CPICH 25.401.
between
transmit
adhere
you can tosetthe theand ID
logical
power cell
in a IDs
cell
MOD following
of
local cell IDs are 0
a logical cell to
RAN16.0 and
Parameter check UCELLINTRAFREQH CellId numbering
and that of at another RNC
configured the later
O principles:
logical cell to 2.
RNC.
MOD Specify
For clear different
and easy
If
Theevents
RNC 1A, 1C,
supports RAN16.0 and
Parameter check UCELLINTRAFREQH RNCId ID of
number an RNC
ranges
identification, for RNC
and 1D
a maximum ofare later
O logical
adhere cells
to thein
reported
5100 to the
logical cells.
MOD different
following
RNC, the subracks.
target
Logical cells are RAN16.0 and
Parameter check UCELLINTRAFREQH SHOQualmin For
cell example,
numbering
can be you RNC
uniquely butadded
not later
O can
to specify
principles:
the active the
set
necessarily
range
only
This of 0 CPICH
when
parameterto 899
MOD consecutively
for the
Specify
specifies logical
different
Ec/No is greater
the cells RAN16.0 and
Parameter check UCELLINTRAFREQH HystFor1C numbered within a RNC
in subrack
number
than this 0
ranges (MPS)
value for
O
hysteretic
RNC. Forparameter
example, for later
and the
logical
event range
1Cset in
cells of
you can the ID
900 to 1799
different for the
subracks.
of a logical cell to 0
MOD logical
For cells in RAN16.0 and
Parameter check CellId and example,
that of another you RNC
UAICHPWROFFSET subrack
can specify1 (EPS). later
logical cell tothe 2.
For detailed
range of 0 to 899
information
for the logical about
cells
For clear and easy
this
in parameter,
subrack 0 see
(MPS)
identification,
3GPP
and TS
the to 25.401.
range
adhere the of
08/24/2023 华为保密信息,未经授权禁止扩散 900 to 1799 for the
following 第441页，共633页
logical
numbering cells in
subrack
principles: 1 (EPS).
For detailed
 a cell in a radio
The RNCThe
network. supports
a
logical cell IDofis
maximum
5100 logicalatcells.
configured the
Uniquelycells identifying
686970386.xls Logical
RNC.
a PRACH The in RNC a
are 文档密级
uniquely
sends the but not
The logical
cell.The
necessarily IDcell cellaID
of IDto
the base
uniquely
common station
identifies
physical
Difference
consecutively
during between
MOD a
thecell
channel ina ais
transmit
cell
radio
usedsetup
power toa RAN16.0 and
Parameter check numbered
procedure.
AICHPowerOffset network. within
The RNC
UAICHPWROFFSET identify
of an AICH a Thecommon
and later
RNC.
mapping Forbetween
example,
logical
physical
that cell ID is in
channel
of PCPICH
you can
logical set
cell IDstheand ID
configured
a cell. Eachat the
of a logical
local cell IDs cell areto 0
RNC.
common Thephysical
RNC RAN16.0 and
Parameter check MOD UPRACH CellId and that of
configured another
at the RNC
sends
channel theis cell ID to
uniquely later
logical
RNC. cell to 2.
the base station
numbered within a
during
cell. The a cell
IDs setup
ofeasy
For clear
The power
RNC and ramp
supports RAN16.0 and
Parameter check MOD UPRACH PhyChId procedure.
common The
physical RNC
identification,
step
The
a of the
logical
maximum random
cell
of ID later
mapping
channels between
should
adhere
access
uniquely
5100 thecells.be
toidentifies
preambles
logical
logical
planned cell IDs and
before the
following
transmitted
a cellcell
Logical in cells
aIDs before
radio are
local
channels are are RAN16.0 and
Parameter check MOD UPRACH PowerRampStep numbering
the UE receives
network.
uniquely The
but RNC
configured
principles: fornot
at the
the later
the
The acquisition
logicalmaximum
necessarily
RNC. cell
cell.One cell IDcan is
indicator
number
configured
consecutively
be configured ofin at thethe
with
PreambleRetransM Specify
random
preambles
RNC.
numbered
The
one RNC
or The different
access
two RNC
within
supports a RAN16.0 and
Parameter check MOD UPRACH number
process ranges for RNC
ax transmitted
sends
RNC.
a maximum
PRACHs. the
For in
cell
example,
It isof a
ID to later
logical
preamble
the
you base
can cells
station
set in
ramping
the ID
5100 logical
recommended cells.
that
different
cycle
during
of a logical subracks.
acells
cellcell setupto 0
MOD Logical
one PRACH are
be RAN16.0 and
Parameter check CellId For
and example,
procedure.
that of The you
another RNC
UPICHPWROFFSET uniquely
configured. but not later
can
mapping
logicalspecify tothe
cellbetween 2.
necessarily
range
logical
Differenceof 0 to
IDs899
cell between and
consecutively
MOD for
Forthe
local
the cell
clear logical
transmit IDs
and cells
are
easy
power RAN16.0 and
Parameter check numbered
PICHPowerOffset configured within a RNC
UPICHPWROFFSET in
of subrack
identification,
PICH 0at(MPS)
the of
RNC. Forand that
example, later
and
RNC.
adhere the range of
PCPICH.
you cantoset the the ID
900 to
following 1799 for the
ADD of a logical cell to 0
HO parameter logical
The cells
RNCofsupports
numbering in RAN16.0 and
UCELLINTRAFREQH CellId and that another RNC
optimization subrack
a maximum 1 (EPS). later
O principles:
logical cell toof2.
For detailed
5100 logical cells.
ADD information
Logical about
HO parameter For clearcells
Specify andare
different easy RAN16.0 and
UCELLINTRAFREQH RNCId this
ID of parameter,
uniquely
number an but notsee
RNC
ranges for RNC
optimization identification, later
O 3GPP
logical TS
necessarily cells 25.401.
in
adhere to the
This parameter
consecutively
different
following subracks.
ADD
HO parameter specifies
numbered
For example,
numbering thewithinyoua RAN16.0 and
UCELLINTRAFREQH HystFor1D RNC
optimization hysteretic
RNC.
can For
specify
principles: value
example,
the for later
O
event
you
range can1D
of set
0 tothe 899 ID
ADD of
forathe
Specifylogical
logical cellcells
different to 0
HO parameter RAN16.0 and
UCELLINTERFREQH CellId and that ranges
in subrack
number of 0another
(MPS) for RNC
optimization later
OCOV logical
and
logicalthecellrange
cells toin2.of
900 to 1799
different subracks.for the
ADD Hysteresis
For clear and for easy
HO parameter logical
For example,cells in you RAN16.0 and
UCELLINTERFREQH HystFor2D triggering
identification, event RNC
optimization subrack
can specify1 (EPS). the later
OCOV 2D.
adhere
range ofto0the
For detailed to 899
ADD following
information
for the logical about
HO parameter Hysteresis
numbering
this parameter, for cells
see RAN16.0 and
UCELLINTERFREQH HystFor2F in subrackevent 0 (MPS) RNC
optimization triggering
principles:
3GPP TS 25.401. 2F. later
OCOV and the range of
Ec/No threshold of
900 to 1799 for the
ADD triggering the inter-
HO parameter InterFreqCSThd2D Specify
logical cells differentin RAN16.0 and
UCELLINTERFREQH frequency
number ranges for RNC
optimization EcN0 subrack 1 (EPS). later
OCOV measurement
Ec/No
logical threshold
cells in forof
For detailed
CS services
triggering
different the
subracks. inter-
ADD information about
HO parameter InterFreqR99PsThd frequency
For
this example,
parameter, yousee RAN16.0 and
UCELLINTERFREQH RNC
optimization 2DEcN0 measurement
can
3GPP specify
TS 25.401. thefor later
OCOV
PS
Ec/No
range non-HSPA
threshold
of 0 to 899of
ADD services
triggering
for the the inter-
logical cells
HO parameter InterFreqHThd2DE RAN16.0 and
UCELLINTERFREQH frequency
in subrack 0 (MPS) RNC
optimization cN0 later
OCOV measurement
and the range for of
Ec/No
HSPA threshold of
900 to services
1799 for the
ADD stopping the inter-
HO parameter InterFreqCSThd2F logical cells in RAN16.0 and
UCELLINTERFREQH frequency RNC
optimization EcN0 subrack 1 (EPS). later
OCOV measurement for
For detailed
CS services
information about
this parameter, see
3GPP TS 25.401.
08/24/2023 华为保密信息,未经授权禁止扩散 第442页，共633页
 a cellcell
local in aIDs radio are
network. The
configured at the
logical
RNC. cell ID is
configured at the
686970386.xls RNC.
The RNC Thesupports
RNC 文档密级
sends
a maximumthe cell of IDof to
Ec/No
the basethreshold
station
5100
stopping logical cells.
the setup
inter-
ADD during acells cell
HO parameter InterFreqR99PsThd Logical
frequency
procedure.
are RAN16.0 and
optimization
UCELLINTERFREQH
2FEcN0 uniquely
measurement butThe notfor
RNC
later
OCOV mapping between
necessarily
PS non-HSPA
Ec/No threshold
logical cell IDs andof
ADD consecutively
services
stopping the inter-
HO parameter local cell IDs
InterFreqHThd2FE numbered within a are RAN16.0 and
UCELLINTERFREQH frequency
configured at the RNC
optimization cN0 RNC. For example, later
OCOV measurement
RNC. for
you
HSPA can set the ID
services
MOD of a logical cell to 0
HO parameter The RNCofsupports RAN16.0 and
UCELLINTRAFREQH CellId and that another RNC
optimization a later
O logical cell toof2.
maximum
5100 logical cells.
MOD Logical
For clearcells andare easy
HO parameter RAN16.0 and
UCELLINTRAFREQH RNCId ID of an RNC
uniquely but not
identification, RNC
optimization later
O necessarily
adhere to the
This parameter
consecutively
following
MOD
HO parameter specifies
numbered
numbering thewithin a RAN16.0 and
UCELLINTRAFREQH HystFor1D RNC
optimization hysteretic
RNC. For
principles: value
example, for later
O
event
you can 1Dset the ID
MOD of a logical
Specify cell to 0
different
HO parameter RAN16.0 and
UCELLINTERFREQH CellId and that of
number ranges for another RNC
optimization later
OCOV logical
logical cell
cellstoin2.
MOD different
Hysteresis subracks.
for easy
HO parameter For example,
For clear and you RAN16.0 and
UCELLINTERFREQH HystFor2D triggering
identification, event RNC
optimization can specify the later
OCOV 2D.
adhere
range ofto0the to 899
MOD following
for the logical
HO parameter Hysteresis
numbering for cells RAN16.0 and
UCELLINTERFREQH HystFor2F in subrack 0 (MPS) RNC
optimization triggering
The logical
principles: event
cellofID2F. later
OCOV and the range
Ec/No threshold
uniquely identifies of
900 to 1799 for the
MOD triggering
a cell
Specify in a the
radio
different inter-
HO parameter InterFreqCSThd2D logical cells in RAN16.0 and
UCELLINTERFREQH frequency
network. RNC
optimization EcN0 number 1The
subrack ranges (EPS). for later
OCOV measurement
Ec/No
logical threshold
cell
cells ID in forof
is
For detailed
CS services
triggering
configured
different theat
subracks. inter-
the
MOD information about
HO parameter InterFreqR99PsThd RNC.
frequency
For The
example, RNC
this parameter, see you RAN16.0 and
UCELLINTERFREQH RNC
optimization 2DEcN0 measurement
sends
can
3GPP thefor
the 25.401.
specify
TS cell ID to later
OCOV
PS
the
Ec/No
range non-HSPA
base 0station
threshold
of to 899of
MOD services
during
the alogical
triggering cell
thesetupinter-
HO parameter InterFreqHThd2DE for
procedure. The
cells RAN16.0 and
UCELLINTERFREQH frequency
in subrack 0 (MPS) RNC
optimization cN0 mapping between later
OCOV measurement
and the range for
of
Ec/No
logical threshold
cell IDs of
HSPA
900 to services
1799 forand
the
MOD stopping the inter-
HO parameter InterFreqCSThd2F local
logical cell IDsinare
cells RAN16.0 and
UCELLINTERFREQH frequency
configured at the RNC
optimization EcN0 subrack 1 (EPS). later
OCOV measurement
Ec/No
RNC. threshold forof
For detailed
CS services
stopping the inter-
MOD information about
HO parameter InterFreqR99PsThd frequency
The RNC supports
this parameter, see RAN16.0 and
UCELLINTERFREQH RNC
optimization 2FEcN0 measurement
a maximum
3GPP TS 25.401. of for later
OCOV
PS non-HSPA
Ec/No
5100 threshold
logical cells.of
MOD servicescells
stopping
Logical the are inter-
HO parameter InterFreqHThd2FE RAN16.0 and
UCELLINTERFREQH frequencybut not
uniquely RNC
optimization cN0 later
OCOV measurement
necessarily for
HSPA services
consecutively
HO parameter MOD numbered within a RAN16.0 and
RNCId ID of an RNC RNC
optimization UINTERFREQNCELL RNC. For example, later
you can set the ID
of a logical cell to 0
HO parameter MOD RAN16.0 and
CellId and that of another RNC
optimization UINTERFREQNCELL later
logical cell to 2.

HO parameter MOD For clearRNC

Unique andIDeasy
of RAN16.0 and
NCellRncId identification, RNC
optimization UINTERFREQNCELL a neighboring cell later
adhere to the
following
numbering
principles:
08/24/2023 华为保密信息,未经授权禁止扩散
Specify different
第443页，共633页
number ranges for
logical cells in
 during a cell setup
procedure. The
mapping between
logical cell IDs and
686970386.xls local cell IDs are 文档密级
configured at the
RNC.
HO parameter MOD The RNC supports RAN16.0 and
NcellId Neighboring Cell ID RNC
optimization UINTERFREQNCELL a maximum of later
5100 logical cells.
HO parameter MOD Logical
CIO of acells are RAN16.0 and
CIOOffset uniquely but cell.
not RNC
optimization UINTERFREQNCELL neighboring later
necessarily
consecutively
HO parameter MOD numbered within a RAN16.0 and
RNCId ID of an RNC RNC
optimization UINTRAFREQNCELL RNC. For example, later
you can set the ID
of a logical cell to 0
HO parameter MOD RAN16.0 and
CellId and that of another RNC
optimization UINTRAFREQNCELL The logical cell later
logical cell to 2. ID
uniquely identifies
HO parameter MOD a
Forcell
Unique in RNC
clear aand
radio easy
ID of RAN16.0 and
NCellRncId network.
identification, The RNC
optimization UINTRAFREQNCELL a neighboring cell later
logical
adherecell ID is
to the
configured
following at the
HO parameter MOD RNC.
numberingThe RNC RAN16.0 and
NcellId Neighboring Cell ID RNC
optimization UINTRAFREQNCELL sends
The the cell
logical
principles: cellIDIDto later
the base identifies
uniquely station
during
a cellofinaadifferent
Specify acell setup
radio
HO parameter MOD CIO
procedure. The RAN16.0 and
CIOOffset network.
number Thecell.for
ranges RNC
optimization UINTRAFREQNCELL neighboring
mapping between later
logical cell
cells IDinis
Quality
logical cell IDs and
configured
different at the
subracks.
ADD requirement
local cell for the
HO parameter RNC.
For TheIDs
example, RNC are
you RAN16.0 and
UCELLINTERRATHO TargetRatCsThd cell of another
configured at RAT
the RNC
optimization sends
can the cell
specify theID to later
COV during
Quality
RNC. inter-RAT
the
rangebase of 0station
to 899
CS handovers
requirement
ADD during
for the cell for
alogical setupthe
cells
HO parameter TargetRatR99PsTh cell
The of another
RNC supports
procedure. RAT RAN16.0 and
optimization
UCELLINTERRATHO
d in subrack
during 0The
inter-RAT (MPS) RNC
later
COV a
andmaximum
mapping
the of of
between
range
PS non-HSPA
Quality
5100
900 tological
logical
service
cell IDs
1799 cells.
for
handovers
and
the
MOD requirement
Logical
local cell cells for
arethe
IDsinare
HO parameter logical cells RAN16.0 and
UCELLINTERRATHO TargetRatCsThd cell of another
uniquely RAT RNC
optimization subrack 1but
configured atnot
(EPS).the later
COV during
Quality
necessarily
RNC. inter-RAT
For detailed
CS handovers
requirement
consecutively for the
MOD information about
HO parameter TargetRatR99PsTh numbered
cell
The of another
RNC supports
this parameter, within RATa
see RAN16.0 and
UCELLINTERRATHO RNC
optimization d during
RNC.
a inter-RAT
For
maximum
3GPP example,
TS 25.401.of later
COV
PS non-HSPA
you
5100 can
logicalset the ID
cells.
MOD service
of a logical
Logical handovers
cellscellareto 0
HO parameter RAN16.0 and
UCELLINTERRATHO CellId and that of
uniquely butanother
not RNC
optimization later
COV logical
necessarily cell to 2.
Quality
MOD consecutively
requirement for the
HO parameter For clear and
numbered easy
within a RAN16.0 and
UCELLINTERRATHO TargetRatHThd cell of another
identification, RAT RNC
optimization RNC. For example, later
COV during
adhere inter-RAT
toset
the
you
HSPA can handoversthe ID
ADD following
of a logical cell to 0
HO parameter numbering RAN16.0 and
UCELLINTERRATHO CellId and that of another RNC
optimization principles: later
COV logical cell to 2.
Quality
ADD requirement
Specify andfor
For cleardifferent the
easy
HO parameter RAN16.0 and
UCELLINTERRATHO TargetRatHThd cell of
number another
ranges
identification, RAT
for RNC
optimization later
COV during
adhereinter-RAT
logical cells
to the in
HSPA
different
following handovers
subracks.
Feature For example, RAN16.0 and
DSP LICUSAGE TYPE numbering
Query type you RNC
optimization can specify the
principles: later
range of 0 to 899
Feature CNOPERATORIND for the logical
Specify different cells RAN16.0 and
DSP LICUSAGE Operator
in subrack
number index
0
ranges (MPS)for RNC
optimization EX later
and thecells
logical range in of
900 to 1799
different for the
subracks.
logical cells
For example, you in
subrack
can specify 1 (EPS).
the
For detailed
range of 0 to 899
08/24/2023 华为保密信息,未经授权禁止扩散 information
for the logical aboutcells 第444页，共633页
this parameter,
in subrack 0 (MPS) see
3GPP TS
and the range of 25.401.
900 to 1799 for the
 The RNC supports
a maximum of
5100 logical cells.
686970386.xls Logical cells are 文档密级
uniquely but not
necessarily
SET consecutively
Feature numbered a RNC RAN16.0 and
UCORRMALGOSWIT DrSwitch Direct Retrywithin
Switch
optimization RNC. For example, later
CH
you can set the ID
MOD of a logical cell to 0
Feature RAN16.0 and
UCELLDISTANCERE CellId and that of another RNC
optimization later
DIRECTION logical cell to 2.
MOD For clear and easy
Feature InterFreqRedirSwit Inter-freq RAN16.0 and
UCELLDISTANCERE identification, RNC
optimization ch Redirection Switch later
DIRECTION adhere to the
MOD following
Feature InterFreqRedirDela Inter-freq
numberingRedirect RNC RAN16.0 and
UCELLDISTANCERE
optimization yThd Propa Delay Thres
principles: later
DIRECTION
MOD Inter-freq
Feature InterFreqRedirFact Specify different RAN16.0 and
UCELLDISTANCERE Redirection
number ranges Factor for RNC
optimization orOfNorm later
DIRECTION of Normal
logical cells in
MOD different subracks.
Inter-freq
Feature InterFreqRedirFact For example, you RAN16.0 and
UCELLDISTANCERE Redirection Factor RNC
optimization orOfLDR can
The specify the ID
logical cell later
DIRECTION of LDR
range of 0
uniquely to 899
identifies
MOD for
a theinlogical
cell a radio cells
Feature ReDirection target RAN16.0 and
UCELLDISTANCERE RedirBandInd in subrack
network. The0 (MPS) RNC
optimization band indicator later
DIRECTION and thecell
logical range
ID isof
900 to 1799atfor
configured thethe
MOD Redirection Target
Feature logicalThe
ReDirUARFCNUpli RNC. cellsRNCin RAN16.0 and
UCELLDISTANCERE UL Frequency RNC
optimization nkInd subrack
sends the1 (EPS).
cell ID to later
DIRECTION Index
For base
the detailedstation
MOD information
during a cellabout
setup
Feature ReDirUARFCNDow Redirection
this parameter,
procedure. target
The see RAN16.0 and
UCELLDISTANCERE RNC
optimization nlink downlink UARFCN
3GPP TSbetween
mapping 25.401. later
DIRECTION
logical cell IDs and
MOD local cell IDs are
Feature Inter-Rat RAN16.0 and
UCELLDISTANCERE RedirSwitch configured RNC
optimization RedirectionatSwitch the later
DIRECTION RNC.
MOD
Feature Inter-Rat
The RNCRedirect
supports RAN16.0 and
UCELLDISTANCERE DelayThs RNC
optimization Propa DelayofThres
a maximum later
DIRECTION
5100 logical cells.
MOD Inter-Ratcells are
Logical
Feature RAN16.0 and
UCELLDISTANCERE RedirFactorOfNorm Redirection
uniquely butFactor not RNC
optimization later
DIRECTION Of Normal
necessarily
MOD consecutively
Inter-Rat
Feature RAN16.0 and
UCELLDISTANCERE RedirFactorOfLDR numbered
Redirectionwithin
Factor a RNC
optimization RNC. For example, later
DIRECTION Of LDR
you can set the ID
ADD of a logical cell to 0
Feature RAN16.0 and
UCELLDISTANCERE CellId and that of another RNC
optimization later
DIRECTION logical cell to 2.
ADD For clear and easy
Feature InterFreqRedirSwit Inter-freq RAN16.0 and
UCELLDISTANCERE identification, RNC
optimization ch Redirection Switch later
DIRECTION adhere to the
ADD following
Feature InterFreqRedirDela Inter-freq
numberingRedirect RNC RAN16.0 and
UCELLDISTANCERE
optimization yThd Propa Delay Thres
principles: later
DIRECTION
ADD Inter-freq
Feature InterFreqRedirFact Specify different RAN16.0 and
UCELLDISTANCERE Redirection
number Factor
ranges for RNC later
optimization orOfNorm
DIRECTION of Normal
logical cells in
different subracks.
For example, you
can specify the
range of 0 to 899
08/24/2023 华为保密信息,未经授权禁止扩散 for the logical cells 第445页，共633页
in subrack 0 (MPS)
and the range of
900 to 1799 for the
 686970386.xls 文档密级

ADD Inter-freq
Feature InterFreqRedirFact RAN16.0 and
UCELLDISTANCERE Redirection Factor RNC
optimization orOfLDR later
DIRECTION of LDR
ADD
Feature ReDirection target RAN16.0 and
UCELLDISTANCERE RedirBandInd RNC
optimization bandlogical
The indicator cell ID later
DIRECTION
uniquely identifies
ADD Redirection Target
Feature ReDirUARFCNUpli a cell in a radio RAN16.0 and
UCELLDISTANCERE UL Frequency
network. The RNC
optimization nkInd later
DIRECTION Index cell ID is
logical
configured at the
ADD
Feature ReDirUARFCNDow RNC.
Redirection
The RNC target RAN16.0 and
UCELLDISTANCERE RNC
optimization nlink downlink
sends
The theUARFCN
logical cell
cell ID
IDto later
DIRECTION
the base identifies
uniquely station
ADD during
a cell ina acellradiosetup
Feature Inter-Rat
procedure. The RAN16.0 and
UCELLDISTANCERE RedirSwitch network. The RNC
optimization Redirection
mapping Switch later
DIRECTION logical cellbetween
ID is
logical cell IDs
configured at the and
ADD local cell
Feature Inter-Rat
RNC. TheIDs are
Redirect
RNC RAN16.0 and
UCELLDISTANCERE DelayThs configured at the RNC
optimization Propa
sends
The Delay
the cell
logical Thres
cell ID
IDto later
DIRECTION RNC.
the base identifies
uniquely station
ADD during
cell ina acell
Inter-Rat
a radiosetup
Feature The RNC supports RAN16.0 and
UCELLDISTANCERE RedirFactorOfNorm procedure.
Redirection
network. The The
Factor RNC
optimization a later
DIRECTION Ofmaximum
mapping
Normal
logical IDofis
cellbetween
5100 logical
logical cell IDs
configured atcells.
theand
ADD Inter-Rat
Logical
local cellcells
IDs are
are
Feature RNC. The RNC RAN16.0 and
UCELLDISTANCERE RedirFactorOfLDR Redirection
uniquely atFactor RNC
optimization sends thebut
configured cell not
the
ID to later
DIRECTION Of LDR
necessarily
RNC.
the base station
consecutively
during
Performancea cell setup
Feature RAN16.0 and
SET UCORRMPARA PerfEnhanceSwitch numbered
The within
RNC supports
procedure.
Enhancement The a RNC
optimization RNC.
a maximum
mapping For example,
of
between later
Switch
you
5100 can
logical setIDs
logical
cell the
cells.ID
and
of
local cell IDs are 0
a logical
Logical cells cell
are to
Power RAN16.0 and
MOD UCELL CellId and that of
uniquely
configured another
butat not
the RNC
optimization later
logical
necessarily 2.
RNC. cell to
consecutively
Power For
TX clear
RNC and
Thepower
numbered of easy
the
within
supports P-
a RAN16.0 and
MOD UCELL PCPICHPower identification, RNC
optimization CPICH
RNC. in
For
a maximum of a cell.
example, later
adhere
you can
5100 toset
logical thethe
cells.ID
following
of a logical
Logical cells cell
are to 0
Power MOD numbering RAN16.0 and
CellId and that of
uniquely butanother
not RNC
optimization UCELLALGOSWITCH principles: later
logical
necessarilyto 2.
cell
Whether
consecutively to enable
Power MOD Specify
the cleardifferent
For algorithms
numbered and
withineasy a RAN16.0 and
NBMLdcAlgoSwitch number ranges
identification, for RNC
optimization UCELLALGOSWITCH related
RNC. to
For cell load
example, later
logical
adherecancells
control.
you tosetthein
the ID
different
following subracks.
of a logical cell to 0
Power For RAN16.0 and
MOD UPCPICHPWR CellId and example,
numbering
that of another you RNC
optimization Maximum later
can
principles:
logical cellTX
specify tothe2.
power
range of of 0the to 899
PCPICH
for the
Specify in
logical
For clear and a cell.
different cells
easy
Power RAN16.0 and
MOD UPCPICHPWR MaxPCPICHPower Thisin
number parameter
subrack 0
ranges
identification, (MPS)for RNC
optimization Minimum TX power later
defines
and
logical
adhere the the
range
cells in
to the in a of
of the PCPICH
maximum coverage
900 to 1799
different
following for the
subracks.
cell.
area This
of a cell.
Power logical
For cells
example, in you RAN16.0 and
MOD UPCPICHPWR MinPCPICHPower numbering
parameter defines RNC
optimization subrack
can specify
principles: 1 (EPS).
the later
the minimum
For detailed
range of 0the to 899
coverage
Indicates area of a
information
for the logical
Specifynumber about
different cells
cell.
device of Node RAN16.0 and
RET optimization MOD RETSUBUNIT DEVICENO this
in parameter,
subrack
number 0 (MPS)
ranges see
for
the
3GPP RET.TS 25.401. B later
and thecells
logical range in of
900 to 1799
different for the
subracks.
logical cells
For example, you in
subrack
can specify 1 (EPS).
the
For detailed
range of 0 to 899
08/24/2023 华为保密信息,未经授权禁止扩散 information
for the logical aboutcells 第446页，共633页
this parameter,
in subrack 0 (MPS) see
3GPP TS
and the range of 25.401.
900 to 1799 for the
 686970386.xls 文档密级

Indicates the
number of the RET Node RAN16.0 and
RET optimization MOD RETSUBUNIT SUBUNITNO
subunit, which B later
starts from 1.
Indicates the
Node RAN16.0 and
RET optimization MOD RETSUBUNIT TILT antenna tilt of the
B later
RET subunit.

RAN16.0 and
RET optimization LST UMMMRCTRL – – RNC
later

RAN16.0 and
RET optimization LST UMRCTRL – – RNC
later
Indicates the
DSP Threshold
device number for inter-
of Node RAN16.0 and
RET optimization DEVICENO frequency
RETDEVICEDATA the RET. cell B later
measurements in
Indicates
idle modethe in SIB3.
DSP number
When theof quality
the RET Node RAN16.0 and
RET optimization SUBUNITNO
RETDEVICEDATA subunit,
(CPICH Ec/No which B later
starts fromby
measured 1. the
The logical cell ID
MOD UE) of the
uniquely identifiesserving RAN16.0 and
U-Inter MLB CellId cell is in
lower than RNC
UCELLSELRESEL a cell a radio later
this threshold
network. plus
Ratio
the valueof the of
MOD number
Qqualmin of for
HSDPA the RAN16.0 and
U-Inter MLB IdleSintersearch users for load RNC
UCELLSELRESEL cell, inter- later
balancing
frequency in cell a cell
The
measurements ID
with logical
the HSDPA cell are
uniquely
load
started. identifies
balancing
When this RAN16.0 and
U-Inter MLB MOD UCELLCAC CellId RNC
a
DRDcell algorithm
parameterin a radiois set to later
network.
based
Ratio ofonthe
127, inter- the
number
frequency users.
of cell
HSDPA RAN16.0 and
U-Inter MLB MOD UCELLCAC LoadBalanceRatio users
The
measurements is
load
for value
load are RNC
later
calculated
balancing
performed.in using
Fora cell
the
The
with HSDPA
detailslogical
theabout
HSDPA load
cell ID
this
Path
uniquely
load lossidentifies
balancing
balancingthreshold
DRD RAN16.0 and
U-Inter MLB ADD UCELLCAC CellId parameter,
for cell edge see UEs.on RNC
algorithm
a
DRDcell
3GPP inTS a based
radio
algorithm
25.304. later
If a UE
the values
network.
based accesses
on the of a
high-band
LoadBalanceRatio
number cell
ofthreshold
users. and
Path loss RAN16.0 and
U-Inter MLB ADD UCELLCAC LoadBalanceRatio its
Thepath
and
for load
cell
loss
value
center
is is
UEs. RNC
equal to or using
MaxHsdpaUserNu greater later
calculated
If a UE accesses a
than
m.
the this threshold,
HSDPA load
low-band
the UE is DRD cell and
balancing
its path ID loss isa acell. RAN16.0 and
U-Inter MLB MOD UCELLDRD CellId Unique
considered
algorithm ofas
based on RNC
equal to or less later
cell edge UE.
the values of
than
When this
the threshold,
LoadBalanceRatio
PathlossThdForEd the UE is for UE
conditions
and RAN16.0 and
U-Inter MLB MOD UCELLDRD considered as a RNC
ge location-based
MaxHsdpaUserNu later
cell center
multi-band UE.
DRD
m.
When thethe UE
are met,
PathlossThdForCe conditions
performs the forDRD UE RAN16.0 and
U-Inter MLB MOD UCELLDRD RNC
nter location-based
procedure towards later
multi-band
a low-band DRD cell in
are met, the
the same sectorUE
MOD performs the DRD RAN16.0 and
U-Inter MLB RNCId ID of an
under the sameRNC. RNC
UINTERFREQNCELL procedure towards later
NodeB. For details
a high-band
about this cell in
MOD the same
parameter, sector RAN16.0 and
U-Inter MLB CellId Unique
under the ofsee
ID same a cell. RNC
UINTERFREQNCELL 3GPP TS 25.215. later
NodeB. For details
about this
parameter, see
3GPP TS 25.215.

08/24/2023 华为保密信息,未经授权禁止扩散 第447页，共633页

 686970386.xls 文档密级

MOD Offset
UniqueofRNC the ID of RAN16.0 and
U-Inter MLB NCellRncId measured CPICH RNC
UINTERFREQNCELL a neighboring cell. later
RSCP used for cell
reselection
Offset of thewhen
MOD Unique
the UE
measured IDinof
is a
idle
CPICH RAN16.0 and
U-Inter MLB NCellId RNC
UINTERFREQNCELL neighboring
mode. used for
RSCP cell.cell later
In a cell reselection
reselection when
procedure,
the UE is in the
idle
MOD RAN16.0 and
U-Inter MLB SIB11Ind RNC subtracts
mode.
Offset of the this RNC
UINTERFREQNCELL later
offset fromCPICH
measured the
measured
In a cellused
Ec/No CPICH
reselection
for cell
MOD RSCP
procedure,
reselection of a the when RAN16.0 and
U-Inter MLB IdleQoffset1sn Maximum
neighboring number
cellthis RNC
UINTERFREQNCELL RNC
the UE subtracts
is in idle later
of
and inter-RAT
offset
mode. thenfrom ranks
the RAB all
directed
neighboring
measured
In retries.
a cell reselection cells.
CPICH It
MOD decides
For details,
RSCP the
of a the see of
size RAN16.0 and
U-Inter MLB IdleQoffset2sn procedure, RNC
UINTERFREQNCELL a candidate
3GPP
neighboring TS set
25.304.
cellthisfor later
RNC subtracts
inter-RAT
and then
offset from DRD.
ranks
the A
all
Whether
candidate to
load
setenablefor
neighboring
measured
the power cells.
CPICH RAN16.0 and
U-Inter MLB ADD UCELLDRD CellId balancing
Unique DRD or
inter-RAT
For
Ec/No ofIDaDRD
details,
balancing
multi-carrier
ofsee
DRD
a cell. RNC
later
includes
Whether
3GPP
neighboring TSto the
to enable
activate
25.304.
cell
algorithm
Whether
HSPA+
neighboring
the code for
technical
service-based DCH
enable
GSM
balancing
and then
services.
the power
satisfaction-based ranks
During all
cells
DRD that
algorithm.
neighboring arecells. RAN16.0 and
U-Inter MLB ADD UCELLDRD DRMaxGSMNum Load service
balancing
DRD threshold
setup
considering DRDisforor RNC
selected
During
This
DCH UEs based
service
algorithm to trigger on later
reconfiguration,
algorithm
load
the
setup difference
priority
activated or for
onlyof blindis
power
this
HSDPA
based balancing
algorithm
onservices.
power
handovers
reconfiguration,
when
DRD inthisthe and or
switch is
ServiceDiffDrdSwit on
enables
During
allowuser the
service
number.
directed retry. RAN16.0 and
U-Inter MLB ADD UCELLDRD this
turned algorithm
downlink. on. In such RNC
ch BSC6910
setup
If this
This orthe
parameter
parameter to is
can later
enables
a
If case,
LdbDRDchoice the is
preferentially
reconfiguration,
set
be to Power,
configured
BSC6910 to
selectsset
load
at
set
up
this to UserNumber,
services
algorithm
balancing DRD in cells
or
the cell
preferentially
LdbDRDSwitchDC cells
Network
a with level.
load-balancing the
resource The
set RAN16.0 and
U-Inter MLB ADD UCELLDRD with
enables
value
up more
multi-carrier
0
services
highest the available
indicates
service in cells RNC
H type
DRD when
is likely to be later
downlink
BSC6910
HSPA+
that
with
priorityinter-RAT
more for power
to
technical
available
UEDCH RAB
selecting
triggered
resources
preferentially
satisfaction-based the
for
based set
DRD
code
access.
secondary is not
resources carrier
LdbDRDSwitchHS services
on
up the
DRD services powerwhen
considering
applicable.
based on code
the
in cells RAN16.0 and
U-Inter MLB ADD UCELLDRD for multi-carrier
remaining
resource usage RNC
DPA with more
load difference
resource available
usage isin
in later
HSDPA
equivalent
the
power
based current users
resources
on number
cell
power. and
the
based best on cell and
of on the
DL parameter
R99
inter-frequency
based
If this
inter-frequency
users
the load. is
When
that can
neighboring
power this access
resource cells. the RAN16.0 and
U-Inter MLB ADD UCELLDRD LdbDRDchoice set to
neighboring UserNumber, RNC
parameter
current
Then,
usage
load incell
power
balancing the isiscells.
set
lessto later
Then,
UserNumber,
than the code value the
of
resources
current
DRD or multi-
resources cell are
areand
secondary
this parameter.
balanced
inter-frequency carrier
among is
SecCellLdbDrdChoi carrier
balanced HSPA+ among RAN16.0 and
U-Inter MLB ADD UCELLDRD selected
If LdbDRDchoice
inter-frequency
neighboring
technical for multi-
cells. is RNC
ce inter-frequency later
carrier
set
cells.
Then, to PowerHSDPA
power
satisfaction-based and
cells.
users When
based this
PowLoadDRDOptS
resources
DRD
switch considering
is are the
turned
on
on
number
LdbDRDLoadRema witch
balanced
load the is setof
difference HSDPA
amongto OFF, is RAN16.0 and
U-Inter MLB ADD UCELLDRD and
Threshold
users. When for RNC
inThdDCH a load-balancing
inter-frequency
based
DR_RAB_SING_D
minimum userthis
on remaining later
parameter
DRD
Load
cells.
number. is likely
thresholdThe is setto
user be
forto
RD_SWITCH
SF in the
Power,
triggered
HSDPA theUEsbest
for DCH
to cell
LdbDRDLoadRema number
check
for the box
secondary
services
refers
code when under
carrier
to
theis RAN16.0 and
U-Inter MLB ADD UCELLDRD trigger
the number power of RNC
inThdHSDPA the DrSwitch
balancing
Threshold
selected
remaining for DRD
formulti-
DL code
non- later
balancing
equivalent DRD in
parameter
algorithm.
resource
carrier
HSPA
the HSDPA
power
downlink. in the
The
usage in the in
downlink
SET
code balancing R99
CodeBalancingDrd the
users best
current
users based cellisfor
cell
performing onless the RAN16.0 and
U-Inter MLB ADD UCELLDRD UCORRMALGOS
DRD
code
power.
than algorithm
balancing
the value or can
of RNC
Switch DCH services later
WITCH
be
DRD
this enabled command
algorithm.
parameter. only
the
is
when
The number
selected,
codethe minimum of
this
If LdbDRDchoice
HSDPA users is
algorithm
CodeBalancingDrd remaining
balancing
set to Power applies
SF
DRD andin the to RAN16.0 and
U-Inter MLB ADD UCELLDRD performing
a single HSDPA RNC
MinSFThd best
algorithmcell service.
PowLoadDRDOptS iscan greaterbe later
services.
When
than
enabled or this
equal
only switch to
when theis
witch is set to ON,
turned
value
the of
minimum on thisand the
CodeBalancingDrd a load-balancing
DR_RAB_COMB_
parameter and RAN16.0 and
U-Inter MLB ADD UCELLDRD remaining
DRD is likely SF tointhethe
be RNC
CodeRateThd DRD_SWITCH
code resource later
best
triggeredcell isforgreater
DCH
check
usage
than
services the box
in value
the
when underbest of
the
the
cell DrSwitch
is greater
CodeBalancingDrd
remaining total DL than
parameter
or equal
MinSFThd
power in to the in
the
and thethe
SET
value
code
current ofcell is less
resource
08/24/2023 华为保密信息,未经授权禁止扩散 UCORRMALGOS
CodeBalancingDrd
usage
than the in value
the best of 第448页，共633页
WITCH
CodeRateThd.
cell
this is command
greater
parameter. than
is selected,
or equal to the this
algorithm
value of this applies to
 different
frequencies from
the source
Whether thecell target
during
UL UARFCN bind to
686970386.xls which
handovers. the UE In is 文档密级
addition, the
redirected needs to
BSC6910
be configured. excludes
the target
TRUE indicates RAN16.0 and
U-Inter MLB ADD UCELLDRD ReDirBandInd UARFCNs
that the UL for inter- RNC
Whether later
frequencyDC-
UARFCN RRC to
needs
HSDPA
DRD.
be It is
configured. UEs
ReDirUARFCNUpli enable
recommended
FALSEuplink
Target the
indicates uplink that RAN16.0 and
U-Inter MLB ADD UCELLDRD load
this balancing
parameter be RNC
nkInd that the
UARFCN of a cell UL later
algorithm
set RRC
UARFCN
for to to
need select not
a cell
Load with
manuallyThefor
threshold
DependOnNCell
be
redirection. the
ReDirUARFCNUpli Whether
Target
primary
DC-HSDPA
withoutrange
configured DL carrier
the to and UEs
activate it to
is RAN16.0 and
U-Inter MLB ADD UCELLDRD value of the RNC
nk UARFCN
during
trigger
the terminal
consideration
automatically the
load for
access. the
type of later
UL UARFCN
RRC
If this redirection.
balance
hierarchy
neighboring
configured
depends switch DRD
on cells isin the
the
Whether
Different
turned
uplink.
algorithm. on
If the
values
theand
When RNC the of
under
ReDirUARFCNDow considers thethe
according
value the
of to RAN16.0 and
U-Inter MLB ADD UCELLDRD RedirBandInd
serving
remaining
this
Whetherswitch cellthe has
number
isRNC, load the RNC
nlink neighboring
relation
RedirBandInd. between later
in candidate
correspond
same totarget
of
turned
HSPA+
that
the ULis,downlink
equivalent on,
in
and the
technical
the DL users
non-
cells
different
load
in the
BSC6910
compliancewhen
as a
uplink value
selects
ofis lessa
cells
overlapped
UARFCNs.
ULLdbDRDSwitchD selecting
ranges
neighboring
than
cell
is the
mapping
considered
network.
athe
ofvalue
This
target
cell
toin of
helpsthe
the RAN16.0 and
U-Inter MLB ADD UCELLDRD cell
UARFCN.for periodic RNC
cHSDPA during
this
DPG
periodic
avoid withload
parameter
self- the
Directed later
Directed
balancing Retry
DRD
when
highest
Retry
redirection.DC-HSDPA
terminal
Decision Self-for
Decision
HSDPA
UEs
type
(DRD) access
priority
process(DRD).
services, the
for
redirection
ULLdbDRDLoadRe Whether to isenable a and RAN16.0 and
U-Inter MLB ADD UCELLDRD When
the
cell, BSC6910
terminal
blind load this
handover- balancing
access. RNC
mainThdDcHSDPA theprocess
algorithm in which of UE later
parameter
selects
DRD
When
based isthisthe
triggered
non-periodic iscell
switch set withto
is
the target
location-based cell for
TRUE,
the primary
for DC-HSDPA
turned
DRD the
on and
process. RNC
carrier If
redirection
multi-band
Threshold has
DRD.
of the the the In
considers
according
UEs and
DR_RAB_SING_D
this parameter thethe
to load
target
isas RAN16.0 and
U-Inter MLB ADD UCELLDRD DPGDRDSwitch same
the service
percentage UARFCN setup
of RNC
in
DC candidate
numbercell
RD_SWITCH
set to ON, of
with uplink
a atarget
cellin later
the
or source
reconfiguration
remaining cell and
cells
equivalent
larger
SET
with when
remaining
higher users
HSPA+
the
phase,UE
Service
resources still
this
type initiates
selecting
admitted
number afor
to target
the
UCORRMALGOS
technical
access
algorithm
allowing inof athe
the
HSPAPlusSatisSwit selecting
cell
primaryfor
equivalent
WITCH periodic
serving
is
target
users
on, this cell
in RAN16.0 and
U-Inter MLB ADD UCELLDRD compliance
source
determines
algorithm
cell for cell. of is
UE-location- that
UE cell RNC
ch DRD.
and
the the
uplink
algorithm A cell
uplinkis
appliesin the
load to later
preferentially
edge UEs
location-based
based multiple- and cell
LDR
of theortarget
selected
a single OLC asDRD.
service. theor
center
multi-band
band
CLB UEs
directed
state should
cannot retry.
HRetryTargCellLoa Path
DRD
be
When
When
loss
neighboring
served thisthreshold
primary-carrier
When this
target
the by cell.
switch
cell low- cell
inis RAN16.0 and
U-Inter MLB ADD UCELLDRD be
for
the selected
cell
DC-HSDPA
turnedperiodic edge
on and asUEs.
DRD the RNC
dStusInd or high-band
parameter
percentage isofsetcells. to later
target
If a (such
UEs. UE
DR_RAB_COMB_
process cell.
accesses
and blinda
That
RT
remaining
When is, this as
this cell and
high-band
DRD_SWITCH
handover-based
algorithm enables in
BasedUELocDRDS conversational
Path
resources
parameter
its
SET path loss
non-periodic loss threshold
inisis aset
DRD
or
cell to RAN16.0 and
U-Inter MLB ADD UCELLDRD cell
for edge
streaming
cell
exceeds
FALSE, center UEs
this
the RNC in
UEs. a RNC
witch equal
UCORRMALGOS
process. to or If greater
this later
high-band
services),
If a
does UE
threshold, accesses
notisthreshold,cell
UE
the
consider to a
than
WITCH
parameter
perform this
location-based the on,
isDRD thisto
set
low-band
BSC6910
the load cell
selects
isinHSPA+ and
TraffTypeForBased the
OFF,
its
this
UE
algorithm
procedure
multi-band
path
cell
candidate
the loss applies
astarget DRD
the is a to
towards RAN16.0 and
U-Inter MLB ADD UCELLDRD considered
combined
technical
a low-band as
services.
cell in RNC
UELoc takes
equal
target
cells effect
to
cellorUE.
when oflessfor
UE- later
cell
the edge
compliance
same
real-time sectorof
services. cells
than
selecting
When this
location-basedthe threshold,
a target in
is
When
the not
under UE considered
multiple-bandthe
this
is same
cell
the for
PathlossThdForEd conditions
DRDand periodic for
process. UEto RAN16.0 and
U-Inter MLB ADD UCELLDRD NodeB
parameter
considered
directed
DRD. retry. isasset Ifa RNC
ge location-based
enables
NRT (such cell as center later
cell center
LdbDRDchoice
This parameter
multi-band UE.
DRD is
UEs
When
set
an to inUserNumber,
background
advanced a low-band
the or
are
cell met,
to perform the UEthe
PathlossThdForCe interactive
conditions
the percentage
parameter.
performs theforToUE of RAN16.0 and
U-Inter MLB ADD UCELLDRD
nter DRD
services), procedure
location-based
remaining
modify this UEDRD RNC
later
procedure
towards
location-based towards
a high-
multi-band
resources
parameter,
a low-band inDRD thein
contact
cell
band
multi-band
are
cell
Huaweimet, cell
equals in
the
Customer the
DRD
the UE
BasedUELocDRDR thesame
takes same
performs sector
effect sector
the under
forDRD RAN16.0 and
U-Inter MLB ADD UCELLDRD percentage
Service
under the Center
same of the for RNC
emainThd the same
non-real-time
procedure NodeB.
towards later
remaining
technical
NodeB. HSDPA
support.
For details
services.
a high-band
Periodic addition
UE
about number this cell in
ADD the
ID ofsame
resources.
parameter,an RNC sector
Ifsee RAN16.0 and
of missing RNCId under
LdbDRDchoice the same is RNC
UINTRAFREQNCELL 3GPP TS 25.215. later
neighboring cells NodeB.
set to Power, For details the
Periodic addition about this of
percentage
ADD Unique
parameter,
remaining ID ofsee a cell RAN16.0 and
of missing CellId RNC
UINTRAFREQNCELL 3GPP TS 25.215.
resources in the later
neighboring cells
cell equals the
Periodic addition Unique
percentage RNCofIDthe of
ADD RAN16.0 and
of missing NCellRncId a neighboring
remaining downlink cell RNC
UINTRAFREQNCELL later
neighboring cells power resources.
For example, when
the percentage of
remaining
resources in cell A
08/24/2023 华为保密信息,未经授权禁止扩散 exceeds this 第449页，共633页
threshold in the
ADD UCELLDRD
command with
 Determines
algorithm,
whether eventthis 1A
Cell
parameter
threshold offsetisused is used for
Flag
CPICH
for moving
affected of whether
RSCP
when the the
adding a cell into
686970386.xls measurement
border
cell
the
of
is added
active
a cell.
set
to
will
the 文档密级
value in cell
active set. If this
affect
In the the
selection
parameter case relative
or isofset an to
threshold
reselection
event-based
"NOT_AFFECT", of the
when
intra-
Periodic addition Cell
Unique
event
the UEoffset
1B. IDinused
is ofidle a for
ADD frequency
the
CPICH relative Ec/No RAN16.0 and
of missing NCellId neighboring
mode. cell RNC
UINTRAFREQNCELL measurement
threshold
measurement of event or later
neighboring cells This
1A isparameter
inter-RAT
value not
in affected
cell
is a
Periodic addition flag
Offsetthe of
measurement,
when whether
of cell isthe
ADD selection
Cell
adding offset
neighboring orused
thethe cell
cell for
into RAN16.0 and
of missing CIOOffset UE
added determines
reselection to whenactive RNC
UINTRAFREQNCELL CPICH
the
CPICH active RSCP set will later
neighboring cells whether
set.
the UEThat istois,
in trigger
the cell
idle
measurement
affect
measurement the relative
an
signals
mode. event are according
N/A
Periodic addition value
threshold
Whether
value. inThis
cell
toof the for
send
ADD to
Cell
when the sum
offset
the UE of
used RAN16.0 and
of missing CellsForbidden1A selection
event
system
parameter
CIOOffset, 1B or
information
is
CIO, used RNC
UINTRAFREQNCELL CPICH
evaluates
Offset
reselection ofEc/No whether
when later
neighboring cells NOT_AFFECT:
block
for
and RSCP
the11 (SIB11)
actual
measurement
event
neighboring
the UE is1A should
incell cellThe be
Adding
including
measurement.
measured
value
triggered. in the the
cell value.
If this into
Periodic addition CPICH
connected mode.
ADD the active
neighboring set
iscell does RAN16.0 and
of missing CellsForbidden1B offset
The
selection
parameter UE
measurement
is does
subtracted
or not
set to RNC
UINTRAFREQNCELL not
consideraffect
information.
from
reselection
"AFFECT", the the
the value
when
the later
neighboring cells value.
During This
cell
relative
neighboring
of
the this
relative threshold
UEparameter
is iniscell
threshold
Periodic addition parameter
selection
of
The the event
value
measurement or FALSE used
1B.
ADD when
connected
of
for event
Ec/No evaluating
1A mode.
is an RAN16.0 and
of missing SIB11Ind reselection,
The
indicates
value cell
beforesignal
thatcell thewill RNC
UINTRAFREQNCELL inter-frequency
affected
measurement. when the
The later
neighboring cells QOffset1sn
affect
neighboring
reselection. the UEis Intothe
measurement
During
cell
offset is cell
added
is subtracted the
cell
evaluate offset
information
handover whetheris not
Periodic addition event.
selection
active
from theset. or That is,
ADD corresponding
event
included
algorithms, 1B should
in thisto
SIB11. RAN16.0 and
of missing IdleQoffset1sn reselection,
the cell
neighboring
Whether
CPICH signals
to
RSCP, cell
send are
and RNC
UINTRAFREQNCELL occur.
The
parameter
InWhether
the
QOffset1sn
involved valueAFFECT:
case toTRUE
when isof
is used
a
the
the later
neighboring cells measurement
SIB12
QOffset2sn
Adding
indicates carrying
the that is the
cell thethe
into
for moving
configure
periodical
cell
UE offset
evaluates the the
inter-
value
neighboring
cell
the
border before
offset
active
neighboring of a set cell
cell
cell.
Periodic addition priority
frequency
corresponding
whether flag
event for a
to
ADD reselection.
information.
corresponding
affects
information
This the
parameter In 1A
relative
is tocan RAN16.0 and
of missing IdleQoffset2sn neighboring
measurement
CPICH
should RSCP,
be cell.
orand RNC
UINTRAFREQNCELL handover
CPICH
threshold
included
be configuredEc/No.
inof the
SIB11.byFor later
neighboring cells inter-RAT
QOffset2sn
triggered. is the
algorithms,
The
details
event
the value
Radio1B.about The this
FALSE
Network cell
The value
measurement,
cell offset FALSE the
Periodic addition parameter
indicates
QOffset1sn
signal
Planner will that
(RNP) isand
not used
the
affect
ADD indicates
RNC that
determines
corresponding the
to RAN16.0 and
of missing SIB12Ind for moving
neighboring
QOffset2sn,
the
based UEon evaluate thesee RNC
neighboring cells
UINTRAFREQNCELL neighboring
whether
CPICH
border
information toathe
Ec/No.
of
cell
initiate
cell.
is notFora later
3GPP
whether
actual
priority TS
network.
is not 25.331.
event 1B Ifon
handover
details
This about
parameter based
Periodic addition
included
should
this
the sum
QOffset1sn
in SIB12.
occur.
parameter
configured. of In
and iscan
the
ADD be
The configured
tovalue
QOffset1sn
set a larger TRUEand by RAN16.0 and
of missing ConnQoffset1sn algorithm
CIOOffset,
QOffset2sn, of CIO,
see RNC
UINTRAFREQNCELL the Radio
indicates
QOffset2sn
value, Network
that are the later
neighboring cells and
3GPP
Planner thethe
neighboring
neighboring TS actual
(RNP)
cell
25.331.
used
Penalty
probability
combination,when time the
for for UE
cell
the
measured
based
information on value.
the is
Periodic addition is in idle
hierarchical
reselection
cell mode,
with an invalid cell
ADD QOffset1sn
actual
included network. and RAN16.0 and
of missing
UINTRAFREQNCELL
ConnQoffset2sn while
reselection
reduces.
priority
QOffset2sn isin the SIB12.
after
arelasta RNC
later
neighboring cells ConnQoffset1sn
UE
Cell
one reselects
offset
towhen
be the used a UE for
used
Note
and that in FDD
hierarchical
CPICH
Note
considered
is in idlethat RSCP in
mode, cell.
FDD
as the
Periodic addition mode, this
ADD TpenaltyHcsResele ConnQoffset2sn
The
mode, hierarchical
measurement
while this RAN16.0 and
of missing parameter is RNC
neighboring cells
UINTRAFREQNCELL ct are
cell
value used
parameter
object. in when
reselection
ConnQoffset1sn is valid
validthe later
Cell
only
UE
functionisoffset
when
in used
SIB11
connected for
only when SIB11 a
hierarchical
and enables cell
CPICH
Indicator
mode.
UE invalue
idleEc/No
is modeset as
Periodic addition
ADD
selection
Indicator
The
Priority
ConnQoffset2sn ofisor set asto
TRUE RAN16.0 and
of missing TempOffset1 measurement
TRUE.
ConnQoffset1sn
reselect
reselection. a RNC
TRUE.
indicates
neighboring
Indicator that anthe
cells.
neighboring cells
UINTRAFREQNCELL are
value
and used
hierarchical in for when
cell
the
in later
neighboring
The
MBMS
UE ispriority
hierarchical in neighboring
connected cell
cell
For
If
For this details,
ConnQoffset2sn
the network.
parameter
details, see
see is
Periodic addition priority
assigned
cell.
mode.
selection When is to
or a
this
ADD 3GPP
are
set valid
to TS
INFINITY,
3GPP TS 25.331. 25.331.
only if thea RAN16.0 and
of missing TempOffset2 configured.
neighboring
parameter
ConnQoffset1sn
reselection. iscellset is to RNC
UINTRAFREQNCELL SIB12
neighboring
When
valid only message
the cell this
algorithm is
is later
neighboring cells TRUE,
and thewhen current
available.
not
of selected
neighboring
parameter The as
iscellset the
cell to
neighboring
ConnQoffset2sn
If this parameter is
is
Periodic addition measured
Source
target
combination
"TRUE". of
cell.The value of
ADD an
are
set MBMS
valid
to only if the
INFINITY, a RAN16.0 and
of missing NPrioFlag the neighboring
neighboring
(controlled cells.
bycell.
cell cell RNC
UINTRAFREQNCELL neighboring
SIB12
neighboring message cell is is later
neighboring cells minus
When
HO_MC_NCELL_C
with a the
this
lower value priority of
When
available.
not this
selected The as the
this
parameterparameter is is to
Periodic addition
OMBINE_SWITCH
is more
parameter
measured
target cell. is set
possibly
value set of to
ADD used
USER,
)FALSE,
is for
enabled,
delivered cell
neighboring
as the RAN16.0 and
of missing NPrio the the
neighboring current cell RNC
UINTRAFREQNCELL reselection
cells
total are configured
number
measurement ranking.
of is later
neighboring cells neighboring
minus the value cell of
This
by parameter
users.
neighboring
object. For When cells to
not
this an MBMS
parameter is
needs
this
all cells
example, toinbe
parameter setis
thecell.
the
Periodic addition neighboring
used for cell
ADD based
set
active on the
to SONOPTI,
neighboring set may cell RAN16.0 and
of missing MbmsNCellInd reselection ranking. RNC
UINTRAFREQNCELL actual
neighboring
exceed
with situation.
32
priority if1cells
more
is later
neighboring cells The
This Multimedia
parameter
are
than
more configured
one link by
exists
needs to be setto
Broadcast possible
Periodic addition the
in
be theSON active
selected feature set.the
ADD Multicast
based theas
on Service RAN16.0 and
of missing UintraNcellSRC based
The RNC
measurement
(MBMS) onfeature
the
considers RNC
UINTRAFREQNCELL actual situation. later
neighboring cells optimization
this
object
providesparameter
than the as
results.
one of
neighboring
unidirectional When
conditions cellthis
point-
parameterpriority 2.the to
for selecting
with
to-multipoint is set
SONMEAS,
neighboring cells.
multimedia
neighboring
That is, a It allows
services. cells
08/24/2023 华为保密信息,未经授权禁止扩散 are configured
neighboring
data to be cell 第450页，共633页
during
with the priority
a high
transmitted from
optimization
source toof the
is preferentially
one
SON
selected.
multiple feature, If a which
 set to
[10562-10838]
frequency - 475
DOUBLE_HOST,
the cell is
Special
If the DL frequency
controlled by two
frequencies none
686970386.xls belongs
RNCs includingto special 文档密级
frequencies,
SRNC. If thisthen
Band2
parameter is set to
Band2:
DOUBLE_HOST_ UL
Periodic addition Common
Identifying=aDL
frequency
OUT_POOL, the RAN16.0 and
of missing ADD UEXT3GCELL NRncId frequencies [9662- RNC
Neighboring
frequency
cell is controlled RNC.
- 400 by later
neighboring cells 9938]
two RNCs
Periodic addition Band4:
UniquelyUL
excluding identifying
SRNC.
Special RAN16.0 and
of missing ADD UEXT3GCELL CellId frequency
a neighboring
When = DLRNC
the primary RNC
frequencies {412, later
neighboring cells frequency
cell. is faulty,
RNC - 300 the
437, 462, 487, 512,
cell is controlled by
Periodic addition 537,
Band5: 562, UL587, 612,
the secondary RAN16.0 and
of missing ADD UEXT3GCELL CellHostType 637, 662,
frequency 687}
= DL RNC
RNC. later
neighboring cells frequency - 225
Band3
Periodic addition An RNC pool is
Identifying
Band6:
composed UL a ofcell RAN16.0 and
of missing ADD UEXT3GCELL CellName Common RNC
name.
frequency
NodeBs, primary = DL later
neighboring cells frequencies [1162-
frequency
RNC, and - 225
Periodic addition 1513]
Index of theRNC.
secondary RAN16.0 and
of missing ADD UEXT3GCELL CnOpGrpIndex operator
This
Band7:
The host group
parameter
UL type for that RNC
Special later
neighboring cells serves
indicates
frequency a cell.
whether
RNCs is configured = DL
frequencies
to none
Periodic addition onconfigure
frequency
the NodeB theside.
- 225 UL
Primary
frequency
The RNC downlink
of
node the RAN16.0 and
of missing ADD UEXT3GCELL PScrambCode Band4 RNC
scrambling
cell. TRUE code.
Depending
redundancy on the
feature later
neighboring cells
This
value parameter
indicates that to
of [BandId],
is introduced the
Periodic addition Common
specifies
UL
as frequency
shown the
below: need
resolve the RAN16.0 and
of missing ADD UEXT3GCELL BandInd frequencies
selected
be [1537-
frequency
reconfigured. RNC
breakdown issue of later
neighboring cells 1738]
bands
FALSE
Band1 during
indicates cell
an RNC. When a
setup.
that
single thepoint
UL of
Periodic addition Special
frequency need onnot RAN16.0 and
of missing ADD UEXT3GCELL UARFCNUplinkInd Common
failure occurs
frequencies {1887, RNC
be
thereconfigured.
frequencies
primary RNC, [9612- It later
neighboring cells 1912, 1937, 1962,
is configured
9888]
the secondary
Periodic addition 1987, 2012, 2037,
automatically
RNC takes over RAN16.0 and
2062,
based 2087}
oncontrolled
of missing ADD UEXT3GCELL UARFCNUplink Special
NodeBs
Whether totheactivate RNC
later
neighboring cells relationship
frequencies
by the
the primary
transmit none
Band5
between UL and
RNC to ensure
diversity mode that
for
Periodic addition DL
the frequencies.
Band2
commonNodeBs work
channels RAN16.0 and
of missing ADD UEXT3GCELL UARFCNDownlink Common
NULL indicates RNC
properly.
in a cell. later
neighboring cells frequencies
ID
thatofthe
Common UL [4357-
a secondary
4458]
RNC.
frequencydiversity
frequencies remains
[9262-
Periodic addition Transmit
unchanged.
9538] the RAN16.0 and
of missing ADD UEXT3GCELL SlaveNRncId enables
Special RNC
Secondary RNC is later
neighboring cells transmit
frequencies end{1007,toforuse
a redundancy
Special
two
1012,
the or more
1032,RNC.
primary 1037,
Periodic addition frequencies
antennas
1062, 1087} for{12, RAN16.0 and
of missing ADD UEXT3GCELL TxDiversityInd This parameter
37, 62, 87, 112, RNC
transmitting later
neighboring cells identifies
137, 162, whether
187, 212,
signals.
Band6 Each
Periodic addition to
237,configure
antenna
This 262, is287}
parameter RAC.
If the
assigned RNC RAN16.0 and
of missing ADD UEXT3GCELL LAC identifies
Common adifferent
location RNC
supports
Band3
weight the PS
coefficients, later
neighboring cells area code.
frequencies
domain,
such this [4387-
as amplitude
Periodic addition 4413]
parameter
Common must be
and
Defaultphase,timetooffset RAN16.0 and
of missing ADD UEXT3GCELL CfgRacInd set to REQUIRE.
frequencies
improve [937- RNC
neighboring cells used
Special for the
activating later
1288]
reception
a
GUInew
frequenciesconfiguration
Value {1037,
Range:
Periodic addition performance
ifThis
the
1062} parameter
reconfigured of the
NOT_REQUIRE(N
Special
Default
receive time
end. offset RAN16.0 and
of missing ADD UEXT3GCELL RAC indicates
RL
ot transmits
configure the RAC RNC
frequencies
used forarea none
activating later
neighboring cells routing
signaling
Band7
information), at acode.
rate
a
of new
13.6 configuration
kbit/s.
Periodic addition REQUIRE(Configur
Band4
MidRateRlActTime ifCommon
e
the reconfigured
RAC information) RAN16.0 and
of missing ADD UEXT3GCELL RL transmits RNC
DefOffVal This parameter
frequencies [2237-is later
neighboring cells Common
signaling at a rate
an
2563]advanced
frequencies
of 27.2 kbit/s. [1312-
Periodic addition parameter. To
HighRateRlActTime 1513]
modify RAN16.0 and
of missing ADD UEXT3GCELL Specialthis RNC
DefOffVal This parameter
parameter, contact is later
neighboring cells frequencies {2587,
Special
an advanced
Huawei
2612, Customer
2637, 2662,
frequencies
parameter. To{1662,
Service
2687, Center
2712, 2737, for
1687, 1712,
modify this 1737,
technical
2762, 2787, support.
2812,
1762, 1787,contact
parameter, 1812,
2837,
1837, 2862,
1862} 2887,
Huawei Customer
08/24/2023 华为保密信息,未经授权禁止扩散 2912} 第451页，共633页
Service Center for
Band5 support.
technical
Band8
Common
 Squal>0
LINK
RECONFIGURATI
Time that can be
Where:
ON COMMIT
taken by the
message
NodeB to during
process a
686970386.xls -an Squal
reconfiguration
NBAP = RADIO if 文档密级
Time
Qqualmeas
the reconfigured
LINK that can - be
taken
Qqualmin
RL
RECONFIGURATI by
transmits the
Periodic addition NodeB
signaling to at process
a rate
OamGuardValForL ONan
COMMIT
NBAP RADIO RAN16.0 and
of missing ADD UEXT3GCELL -message
ofSrxlev 3.4 kbit/s = during or 6.8 a RNC
owRate LINK later
neighboring cells Qrxlevmeas
kbit/s.offset used
reconfiguration
Time - if
RECONFIGURATI
Qrxlevmin
the activating
reconfigured - a new
Periodic addition for
OamGuardValForM ON Pcompensation
This
RL transmits
configuration
COMMIT
parameter is RAN16.0 and
of missing ADD UEXT3GCELL message
an advanced during a RNC
idRate signaling
during a hard at a rate later
neighboring cells reconfiguration
Time
-of Qqualmeas
parameter. offset used if
is the
handover
the
13.6 kbit/s.
reconfigured if Tothe
Periodic addition for
measured
modify activating
reconfigured thiscellRL a new
OamGuardValForH configuration
RL
quality
parameter,
This transmitsvalue,
parameter contact is RAN16.0 and
of missing ADD UEXT3GCELL transmits signaling RNC
ighRate signaling
during
Default
namely
Huawei
anaadvanced atime at
hard
CPICH
Customer aoffset
rate later
neighboring cells at rate of 3.4
of
handover
used 27.2 kbit/s. if Tothe
kbit/s for
Ec/No.
Service
parameter. activating
or Center
6.8 kbit/s for
Periodic addition reconfigured
a new
technical
modify configuration
this support. RL
ActTimeDefOffValF and
This no HSPA is RAN16.0 and
of missing ADD UEXT3GCELL
orUncellNoH transmits
for
-service a parameter
Qrxlevmeas
parameter, signaling
exists. is the
contact RNC
later
neighboring cells This
an
at a parameter
advanced
rate
reconfiguration of 3.4 RX
measured
Huawei
indicates cell
Customer
whether
parameter.
kbit/s
performed
level
Service or Center
value, 6.8 To
kbit/s
within
namely for
Periodic addition This
to
modify parameter
configure this the is
ActTimeDefOffValF technical
and
the
CPICH
an an
same
advanced HSPA
RSCP. cell
support. if the RAN16.0 and
of missing ADD UEXT3GCELL minimum
parameter, quality
contact RNC
orUncellH service
reconfigured
parameter. exists. To radio later
neighboring cells level.
Huawei When Customer it is set
link
modify transmits
-toQrxlevmin this is the
Periodic addition Service
This FALSE,
signaling parameterCenter
at the
a rate UEfor
is
minimum
parameter,
ActTimeDefOffValF adopts the required
contact RAN16.0 and
of missing ADD UEXT3GCELL technical
an
of
quality advanced
3.4 kbit/s
level support.or
in 6.8
the RNC
orSameCell Huawei
corresponding Customer later
neighboring cells parameter.
kbit/s.
cell.
Service Center To for
value
Minimum
modify of thisthe current
required
Periodic addition Whether
technical
serving to
support.
cell, added
RX
This
-through threshold
parameter, parameter
Pcompensation
configure the contact is = RAN16.0 and
of missing ADD UEXT3GCELL QqualminInd corresponding
Huawei
an advanced the
Customer ADD to RNC
max(UE_TXPWR_
minimum receive later
neighboring cells UCELLSELRESEL
the
Service CPICH
parameter. Center RSCP.
To Iffor
MAX_RACH-
level
command. for a cell.
This
Periodic addition A UE
technical
modify
P_MAX,
this canthis
parameter 0) camp
support. ison
parameter
a cell
Whether
parameter, only a is
if
cellthe
contact RAN16.0 and
of missing ADD UEXT3GCELL Qqualmin set to FALSE,
generally set tothe RNC
measured
supports
Huawei the CPICH later
neighboring cells -FALSE.
UE usesCustomer the
When value
RSCP
minimum
Extended
Service
UE_TXPWR_MAX
of this isCenter
parameter valueitfor
greater
receive is
for
Periodic addition set
than
level
the to theTRUE,
extension
minimum
technical value theof
_RACH
set
UE in
adoptsADD issupport.
thetheThe RAN16.0 and
of missing ADD UEXT3GCELL QrxlevminInd this
maximum parameter.
function.
receive level. TX RNC
UCELLSELRESEL
value inminimum
ADD later
neighboring cells actual
power
for the level
UEXT3GCELL cell. In a UE
Setting
The
receive
may
normal minimum
use this
level
when
cases, isthis
Periodic addition command.
parameter
receive
equal
accessing the
parameter to level
the based
sum
is set cellto of RAN16.0 and
of missing ADD UEXT3GCELL Qrxlevmin RNC
on the
extension
Qrxlevmin
on RACH,
FALSE. This setting function
and
namely of later
neighboring cells
Qqualmin.
refers to that
DeltaQrxlevmin.
MaxAllowedULTxP
parameter the
affects
Periodic addition sum
ower.
the of Qrxlevmin
cell camping
If thisminimum
parameter RAN16.0 and
of missing ADD UEXT3GCELL QrxlevminExtSup The and
success
This parameter rate of is RNC
later
neighboring cells not
receive
- P_MAX
UEs set,
DeltaQrxlevmin
in idle the
level UE
the is
is mode.
indicates
uses
used
extension the
as the whether
value actual
function of
Periodic addition This
maximum
to parameter
configure RF the
Qrxlevmin
minimum
refers to
specifies
output power that
the set
receive in
the
of the RAN16.0 and
of missing ADD UEXT3GCELL DeltaQrxlevmin maximum
ADD
level when TX the RNC
sum
maximum
UE. of Qrxlevmin
allowed later
neighboring cells power.
UCELLSELRESEL
value of
and
uplink TXQrxlevmin
power of
Periodic addition for
is the
less
DeltaQrxlevmin
a UE in cell.
than
the -115is
cell.
MaxAllowedUlTxPo As GUI for
Usually,
dBm.
used Value
as
the impact
thisRange:
the actual RAN16.0 and
of missing ADD UEXT3GCELL When
on network this RNC
werInd TRUE(Configure
parameter
minimum receive is not later
neighboring cells parameter
performance: is not
the
set.
For
level maximum
details
when about
the
set
uplink to any
power value, of see
Periodic addition this
value parameter,
of Qrxlevmin
MaxAllowedUlTxPo the Whether
The
UE), UElarger adopts
FALSE(Not a the cell the RAN16.0 and
of missing ADD UEXT3GCELL 3GPP
is lessHCS. TS
than 25.331.
-115 RNC
wer corresponding
uses
value
configure of the the later
neighboring cells dBm.
value
parameter
maximum of the is,current
uplink the
Periodic addition HCS
serving
In a priority
HCS cell,network, of the
added
more
power difficult
of UE) it is
cell
For
through belongs
details theto to. Set
about
ADD RAN16.0 and
of missing ADD UEXT3GCELL UseOfHcs macro
for the cells
UE provide
camp RNC
a high
this HCS priority
parameter, later
neighboring cells UCELLSELRESEL
continuous
on the cell. The see
for
3GPP a
command.
coverage cellTS if25.331.
the cell
smaller theand value of
Periodic addition coverage
Generally,
micro cells this is small.
provide
the parameter is, RAN16.0 and
of missing ADD UEXT3GCELL HCSPrio The
parametervalue 0 RNC
hotspot
the easier itisisnot
coverage. for later
neighboring cells indicates
set the
the to UEany to camp value.on
lowest HCS priority
Periodic addition the cell.threshold
Quality However,
and 7 indicates the RAN16.0 and
of missing ADD UEXT3GCELL Qhcs if the
for HCS value is RNC
highest HCS later
neighboring cells excessively
reselection. small,
priority.
it is possible that
the UE cannot
receive the system
messages carried
08/24/2023 华为保密信息,未经授权禁止扩散 by PCCPCH. 第452页，共633页
When this
parameter is not
 support
2SF2+2SF4
indicator): when
the
Whetherindicator to supportis
686970386.xls TRUE,
the mode change it means 文档密级
that the cell power
of downlink has E-
DCH
control. SFDownlink
capability
Periodic addition of
power2SF2+2SF4.control
SuppDpcmodeChg RAN16.0 and
of missing ADD UEXT3GCELL includes slow RNC
Flag 7)EDCH_2SF2_SU later
neighboring cells power control
Indicator for closed and
STTD
PPORT(E-DCH
fast power indicator.control.
Periodic addition loop
This TX diversity
parameter
max
For SF
details supportabout
mode 1. This RAN16.0 and
of missing ADD UEXT3GCELL STTDSupInd indicates
2SF
this whether
indicator):
parameter, seea RNC
parameter later
neighboring cells cell
when
3GPP supports
the indicator
TSwhether
25.433.
indicates
Adjustment
STTD. offset a
is TRUE, it means
Periodic addition cellclosed
for supports
that the cell hasTX loop E- RAN16.0 and
of missing ADD UEXT3GCELL CP1SupInd closed loop
diversity TX 1. RNC
DCH SF mode capability later
neighboring cells diversity
For remote mode cells, 1.
of 2SF2.
For recommended
the details about
Periodic addition
ClosedLoopTimeAd closed
value isloop
8)EDCH_2SF4_SU OFFSET2. TX RAN16.0 and
of missing ADD UEXT3GCELL Specifies
diversity the TX
mode 1, RNC
justMode For other
PPORT(E-DCH cells, the later
neighboring cells Specifies
diversity
see 3GPP the
mode TSTX on
recommended
max SF support
diversity
F-DPCH
25.214.
value is mode
for theon
OFFSET1.
Periodic addition 2SF4 indicator):
DpchDivModforOth non-MIMO
DPCH
For detailsfor theusers
about non- RAN16.0 and
of missing ADD UEXT3GCELL when the indicator RNC
er MIMO
and
this users
non-DC-
offset,it see and later
neighboring cells is TRUE, means
non-DC-HSDPA
HSDPA
3GPP users.
Periodic addition Specifies
that
users. theTS cell 25.214.
the has TXE-
FdpchDivModforOt DCH
diversity SF mode
capability on RAN16.0 and
of missing ADD UEXT3GCELL According to 3GPP RNC
her F-DPCH
of 2SF4. for the later
neighboring cells TS 25.211, the F-
MIMO
Whether
DPCH
Specifies users.
can tothe forbid
use TX
Periodic addition 9)EDCH_SF4_SUP
HSPA
STTD UEs
TX from
diversity
DpchDivModforMI diversity on DPCH RAN16.0 and
of missing ADD UEXT3GCELL According
Specifies
PORT(E-DCH
performing only. to
the 3GPP
inter-
For TXmax RNC
MO mode for the MIMO later
neighboring cells TS
SF
RNC 25.211,
diversity
support
detailsinter- mode
about this the
SF4 F-
for
users.
DPCH
the DC-HSDPA
indicator):
frequency
parameter, see can use
when
or inter-
Periodic addition
FdpchDivModforMI RNC
STTD
users.
the
3GPP TX
TS diversity
indicator
intra- 25.211.is RAN16.0 and
of missing ADD UEXT3GCELL RNC
MO mode
TRUE,only.
frequency it means For later
neighboring cells
details
that theabout
According
handovers cellto has
when thisE-
3GPP
Periodic addition parameter,
TS
DCH 25.211,
function is DC-
SF see
the
capability
DivModforDCHSDP theWhether
3GPP TS to enable
25.211. RAN16.0 and
of missing ADD UEXT3GCELL HSDPA
of SF4.
enabled. feature
When this RNC
A HARQ preamble. later
neighboring cells can use STTD
parameter is setTXto
When
GUI
diversityValue
10)EDCH_SF8_SU
NOT this mode
FORBIDDEN, Range:
Periodic addition parameter
None,
only. ForSTTD is
details, set to
CellCapContainerF these
PPORT(E-DCH UEs are RAN16.0 and
of missing ADD UEXT3GCELL 0,
see HARQ3GPP preamble
TS RNC
dd max SF
allowed to performsupport later
neighboring cells is notindicator):
25.211. enabled.
SF8
such handovers.
Periodic addition When
when the
Otherwise, thisindicator
these
OverLayMobilityFla parameter
is TRUE, it ismeansset to RAN16.0 and
of missing ADD UEXT3GCELL UEs are not RNC
g 1,
Cell HARQindividual
that the cell preamble
has E- later
neighboring cells allowed to perform
is
DCH
such enabled.
offset(CIO)SF capability
handovers. When
of a
Periodic addition HARQ
of SF8.preamble
serving cell, whichis RAN16.0 and
of missing ADD UEXT3GCELL HarqPreaCap enabled,
is used
A UE processing HARQ
with the RNC
later
neighboring cells preamble
CIO offset
11)EDCH_HARQ_I
HSPA+ takes
of
and R99 the
Access
effect
neighboring onlypoint on (AP)
cell.
Periodic addition R_COMBIN_SUPP
CS
cell services
indicator. is not
HARQ-preamble-
For detailsUE.
ORT(E-DCH
an HSPA about RAN16.0 and
of missing ADD UEXT3GCELL CIO When
enabled theUEs. indicator Insee RNC
this
support parameter,
HARQ later
neighboring cells E_FACH
is
3GPP "TRUE",
addition, TS ACK, it IR
support
25.331
Combining
In a stackthat
indicator.
indicates network,
When the the
Periodic addition NACK,
and
indicator):
cells underCQI,
description whenthe of
indicator
cell is
preamble,
CIOOffset an is
AP TRUE,
and
in cell.
the RAN16.0 and
of missing ADD UEXT3GCELL EFachSupInd the indicator is RNC
itsame
AP is
postamble
ADD asector
indicates device that the
for later
neighboring cells TRUE,
belong it means
to different
cell
messagessupports
accessing the
can
Periodic addition
UINTERFREQNCE
that
vendors
E_FACH.
UMTS thewireless
cell
and usebe IR
carried
LL.
Indicates
combine
therefore overwhether
Mode
these the RAN16.0 and
of missing ADD UEXT3GCELL APFlag network.
HS-DPCCH. This RNC
the
when
cells videophone
MAC-e
are controlled PDUs later
neighboring cells device integrates
(VP)
by
the serviceRNCs.
aredifferent
received
functions is
more
of the
Periodic addition limited
than
NodeB one in a cell.in E-
time
software RAN16.0 and
of missing ADD UEXT3GCELL VPLimitInd When
DCH.
and parts of the indicator
the RNC
later
neighboring cells is
functions ofitthe
"TRUE",
indicates
12)EDCH_HARQ_
RNC software. that the It is
Periodic addition VP service is
RMV CHASE_COMBIN_
applied to RAN16.0 and
of missing RNCId ID of
limited an RNC
in theand cell. RNC
UINTRAFREQNCELL SUPPORT(E-DCH
households later
neighboring cells
support
SOHO users. HARQ
CHASE Combining
indicator): when
the indicator is
TRUE, it means
08/24/2023 华为保密信息,未经授权禁止扩散 that the cell use 第453页，共633页
CHASE combine
Mode when MAC-e
PDUs are received
 686970386.xls 文档密级

Periodic addition
RMV RAN16.0 and
of missing CellId Unique ID of a cell RNC
UINTRAFREQNCELL later
neighboring cells
Periodic addition
RMV Unique RNC ID of RAN16.0 and
of missing NCellRncId RNC
UINTRAFREQNCELL a neighboring cell later
neighboring cells
Periodic addition
RMV Unique ID of a RAN16.0 and
of missing NCellId RNC
UINTRAFREQNCELL neighboring cell later
neighboring cells

08/24/2023 华为保密信息,未经授权禁止扩散 第454页，共633页

 686970386.xls 文档密级

Operation Description MAE Value Range and Unit Parameter Value Type
Identity-related parameters: include
Use this command to parameters such as CellId, IDTYPE,
modify transmit power GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
parameters of the DL Unit: None Fixed-value parameters:The
foreign key parameters. include
MAEthe does
link in a cell. parameters
not optimize the values of theseprovides
for which the MAE
Use this command to built-in default values that are displayed
parameters.
Value Range: -350 to 150
modify transmit power on the MAE client and can be modified
Default Value: 20 Fixed-value parameters: include the
parameters of the DL by users. The MAE delivers the fixed
Unit: 0.1dB parameters for which the MAE provides
link in a cell. values of these parameters based on the
Use this command to built-in
objects default
that arevalues
filteredthat are displayed
according to
Value Range: -350 to 150
modify transmit power on
algorithm requirements. be modified
the MAE client and can
Default Value: -150
parameters of the DL by users. The MAE delivers the fixed
Use Unit: 0.1dB
link inthis command to
a cell. Identity-related
values of these parameters:
parameters based includeon the
modify parameters in the parameters such as CellId, IDTYPE,
objects that are filtered according to
cell-oriented coverage- GUI Value Range: 0 to 65535 MCC, andrequirements.
algorithm the MOC primary key and
based inter-frequency Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
Use this command
handover to
measurement not optimizefor
thewhich
values
parameters theofMAE
theseprovides
modify
algorithm parameters in the parameters.
built-in default values that cannot be
cell-oriented coverage- Default Value: {15; 60}
modified by users.
Fixed-value The MAE
parameters: delivers
include the the
based inter-frequency Unit: s
Use this command to Value Range: D0, D10, D20, fixed values for
parameters of these
which parameters based
the MAE provides
handover measurement
modify parameters in the D40, D60, D80, D100, D120, on the objects
built-in that arethat
default values filtered according
are displayed
algorithm
cell-oriented coverage- D160, D200, D240, D320, to algorithm
on the MAE requirements.
client and can be modified
based inter-frequency D640, D1280, D2560, D5000 Fixed-value
by users. The parameters:
MAE delivers include the
the fixed
Use this command
handover to
measurement Value
DefaultRange:
Value: D0,
D320D10, D20, parameters for which the MAE
values of these parameters based on the provides
modify
algorithm parameters in the D40, D60,
Unit: None D80, D100, D120, built-in
objects default
that arevalues
filteredthat are displayed
according to
cell-oriented coverage- D160, D200, D240, D320, on
algorithm requirements. be modified
the MAE client and can
based inter-frequency D640, D1280, D2560, D5000 by users. The
Fixed-value MAE delivers
parameters: the fixed
includes the
Use this command
handover to
measurement Default Value: D1280 values of these parameters based on the
parameters for which the MAE provides
modify
algorithm parameters in the Unit: None objects that arevalues
filteredthat
according to
built-in default cannot be
cell-oriented coverage- Default Value: {-115; -95} algorithmbyrequirements.
modified users. The MAE delivers the
based inter-frequency Unit: dBm
Use this command to fixed values of these parameters based
handover measurement Non-MAE-optimized parameters: include
modify parameters in the on the objects that are filtered according
algorithm the non-identity-related parameters that
cell-oriented coverage- to algorithm requirements.
NA the MAE does not optimize. The MAE
based inter-frequency
obtains the values
Identity-related of these parameters
parameters: include
handover measurement
from NEs. such as CellId, IDTYPE,
parameters
algorithm
Use this command to GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
modify a FACH Unit: None Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
Value Range: -350 to 150
Use this command to on the MAE client and can be modified
Default Value: 20
a FACH
modify the parameters in by users. The MAE delivers the fixed
Unit: 0.1dB Identity-related
the intra-frequency values of these parameters:
parameters based includeon the
parameters such as CellId, IDTYPE,
objects that are filtered according to
handover measurement
Use this command GUI Value Range: 0 to 65535 MCC, andrequirements.
the MOC primary key and
algorithm for a cell, to
that algorithm
modify Unit: None foreign key parameters. The MAE does
is, configureparameters
the signaling in Identity-related
the intra-frequency not optimize theparameters:
values of these include
parameters for events parameters such as CellId, IDTYPE,
handover measurement parameters.
1A, 1B,
Use this 1C, 1D, 1F, and
command GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
algorithm
2J for a cell, to
that
modify Unit: None foreign key parameters.
parameters:The MAE thedoes
is, configure signaling in
the parameters Fixed-value includes
the intra-frequency not optimizefor
parameters thewhich
values theofMAE
theseprovides
parameters for events
handover measurement parameters.
built-in default values that cannot be
1A, 1B,
Use this 1C, 1D, 1F, and
command Default Value: {-20; -16}
algorithm
2J for a cell, to
that modified by users.
Fixed-value The MAE
parameters: delivers
include the the
modify Unit: dB
is, configure signaling in
the parameters fixed values for
parameters of these
which parameters based
the MAE provides
the intra-frequency
parameters for events on the objects that arethatfiltered according
built-in default values are displayed
handover
1.
1A, 1B,this
Use measurement
1C, command
1D, 1F, and to Value Range: 0 to 15 to algorithm
on the MAE requirements.
client and can be modified
algorithm
modify
1J the for a
power cell, that
offset Default Value: 8
by users. The MAE delivers the fixed
is, configureofsignaling
information the AICH Unit: 0.5dB Identity-related
values of these parameters:
parameters based includeon the
parameters
in a cell. for events parameters such as CellId, IDTYPE,
objects that are filtered according to
1A, 1B, 1C, 1D, 1F, and GUI Value Range: 0 to 65535 MCC, andrequirements.
the MOC primary key and
algorithm
1J An AICH is used to
3. Unit: None foreign key parameters. The MAE does
carry acquisition not optimize the values of these
indicators, each of which parameters.
corresponds to the
signature of the RACH.
08/24/2023 华为保密信息,未经授权禁止扩散 第455页，共633页
1. Use this command to 686970386.xls 文档密级
modify the power offset Fixed-value parameters: include the
information of the AICH parameters for which the MAE provides
in a cell. built-in default values that are displayed
Value Range: -22 to 5
on the MAE client and can be modified
Default Value: -6
2. An AICH is used to by users. The MAE delivers the fixed
Unit: dB Identity-related
carry acquisition values of these parameters:
parameters basedincludeon the
Use this command
indicators, is
each of which parameters such as CellId, IDTYPE,
objects that are filtered according to
used to modify
corresponds to the PRACH GUI Value Range: 0 to 65535 MCC, andrequirements.
algorithm the MOC primary key and
configuration
signature of the RACH. Unit: None foreign key parameters. The MAE does
information. Identity-related
not optimize theparameters:
values of theseinclude
Use this command is parameters
parameters. such as CellId, IDTYPE,
used to modify PRACH GUI Value Range: 0 to 255 MCC, and the MOC primary key and
configuration Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
information. not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
This command is used parameters.
built-in default values that cannot be
to modify PRACH Default Value: {1; 2}
modified by users. The MAE delivers the
configuration Unit: dB Fixed-value
fixed values parameters: includesbased
of these parameters the
information. parameters for which the MAE provides
This command is used on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
to modify PRACH Default Value: {20; 32}
modified by users. The MAE delivers the
configuration Unit: None
fixed values of these
Identity-related parameters
parameters: based
include
information.
Use this command to on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
modify the power offset GUI Value Range: 0 to 65535 to algorithm
MCC, requirements.
and the MOC primary key and
information of the PICH Unit: None Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
in a cell parameters
not optimizeforthewhich
valuestheofMAE
theseprovides
Use this command to built-in default values that are displayed
parameters.
Value Range: -22 to 5
modify the power offset on the MAE client and can be modified
Use this command to Default Value: -7
information of the PICH by users. The MAE delivers the fixed
add intra-frequency Unit: dB Identity-related
in a cell values of these parameters:
parameters basedincludeon the
handover measurement parameters such as CellId, IDTYPE,
objects that are filtered according to
algorithm parameters for GUI Value Range: 0 to 65535 MCC, andrequirements.
algorithm the MOC primary key and
Use this
a cell, command
that to
is, configure Unit: None foreign key parameters. The MAE does
add intra-frequency
signaling parameters for Identity-related
not optimize theparameters:
values of theseinclude
handover
events 1A,measurement
1B, 1C, 1D, parameters
parameters. such as CellId, IDTYPE,
algorithm
1F, and 2Jparameters for GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
Use this
a cell, command
that to
is, configure Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
add intra-frequency
signaling parameters for not optimizeforthewhich
values
parameters theofMAE
theseprovides
handover
events 1A,measurement
1B, 1C, 1D, parameters.
built-in default values that cannot be
algorithm
1F, and 2Jparameters for Default Value: 8
modified by users. The MAE delivers the
a cell, that is, configure Unit: 0.5dB
Use this command to for fixed values of these
Identity-related parameters
parameters: based
include
signaling parameters
add cell-oriented on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
events 1A, 1B, 1C, 1D,
coverage-based inter- GUI Value Range: 0 to 65535 to algorithm
MCC, requirements.
and the MOC primary key and
1F, and 1J
frequency handover Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
Use this command
measurement to
algorithm not optimizeforthewhich
values
parameters theofMAE
theseprovides
add cell-oriented
parameters parameters.
built-in default values that cannot be
coverage-based inter- Default Value: 4
modified by users. The MAE delivers the
frequency handover Unit: 0.5dB; 0.5dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters built-in default values that cannot be
coverage-based inter- Default Value: 4 to algorithm requirements.
modified by users. The MAE delivers the
frequency handover Unit: 0.5dB; 0.5dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters Default Value: - built-in default values that cannot be
coverage-based inter- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
frequency handover Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters Default Value: - built-in default values that cannot be
coverage-based inter- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
frequency handover Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters Default Value: - built-in default values that cannot be
coverage-based inter- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
frequency handover Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters Default Value: - built-in default values that cannot be
coverage-based inter- to algorithm requirements.
12+HystFor2D/2 modified by users. The MAE delivers the
frequency handover
Unit: dB fixed values of these parameters based
measurement algorithm
on the objects that are filtered according
parameters
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第456页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
Use this command to
parameters for which the MAE provides
add cell-oriented
Default Value: - built-in default values that cannot be
coverage-based inter-
12+HystFor2D/2 modified by users. The MAE delivers the
frequency handover Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters Default Value: - built-in default values that cannot be
coverage-based
Use this command inter-
to to algorithm requirements.
12+HystFor2D/2 modified by users. The MAE delivers the
frequency
modify the handover
parameters in Unit: dB fixed values of these
Identity-related parameters
parameters: based
include
measurement algorithm
the intra-frequency on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
parameters
handover measurement
Use this command GUI Value Range: 0 to 65535 to algorithm
MCC, requirements.
and the MOC primary key and
algorithm for a cell, to
that
modify Unit: None foreign key parameters. The MAE does
is, configureparameters
the signaling in Identity-related
the intra-frequency not optimize theparameters:
values of theseinclude
parameters for events parameters such as CellId, IDTYPE,
handover measurement parameters.
1A, 1B,
Use this1C, 1D, 1F, and
command GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
algorithm
2J for a cell, to
that
modify Unit: None foreign key parameters.
parameters:The MAE the
does
is, configure signaling in
the parameters Fixed-value includes
the intra-frequency not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters for events
handover measurement parameters.
built-in default values that cannot be
1A, 1B, 1C, 1D, 1F, and Default Value: 8
algorithm
2J for a cell, that modified by users. The MAE delivers the
Unit: 0.5dB
is, configure
Use signaling
this command to fixed values of these
Identity-related parameters
parameters: based
include
parameters
modify for events
parameters in the on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
1A, 1B, 1C, 1D,
cell-oriented 1F, and
coverage- GUI Value Range: 0 to 65535 to algorithm
MCC, requirements.
and the MOC primary key and
1J
based inter-frequency Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
Use this command
handover measurementto not optimizeforthewhich
values
parameters theofMAE
theseprovides
modify
algorithmparameters in the parameters.
built-in default values that cannot be
cell-oriented coverage- Default Value: 4
modified by users. The MAE delivers the
based inter-frequency Unit: 0.5dB; 0.5dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm built-in default values that cannot be
cell-oriented coverage- Default Value: 4 to algorithm requirements.
modified by users. The MAE delivers the
based inter-frequency Unit: 0.5dB; 0.5dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
14+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
12+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
12+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency Fixed-value
Use this command to Unit: dB fixed values parameters: includesbased
of these parameters the
handover measurement parameters for which the MAE provides
modify parameters in the on the objects that are filtered according
algorithm Default Value: - built-in default values that cannot be
cell-oriented coverage- to algorithm requirements.
12+HystFor2D/2 modified by users. The MAE delivers the
based inter-frequency
Unit: dB fixed values of these
Identity-related parameters
parameters: based
include
handover measurement
Use this command to on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
algorithm
modify the information GUI Value Range: 0 to 4095 to algorithm
MCC, requirements.
and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. Identity-related
not optimize theparameters:
values of theseinclude
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an intra-frequency Unit: None foreign key parameters. The MAE does
neighboring cell Identity-related
not optimize theparameters:
values of theseinclude
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第457页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
Use this command to parameters such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. Range-value
not optimize the parameters:
values of include
these the
Use this command to parameters
parameters. for which the MAE calculates
modify the information Value Range: -20 to 20 optimization values according to
about an inter-frequency Unit: 0.5 dB algorithm requirements and the value
neighboring cell. Identity-related parameters:
range of each parameter on include
the MAE
Use this command to parameters such
client or on NEs. as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
about an intra-frequency Unit: None foreign key parameters. The MAE does
neighboring cell Identity-related
not optimize theparameters:
values of these include
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an intra-frequency Unit: None foreign key parameters. The MAE does
neighboring cell Identity-related
not optimize theparameters:
values of these include
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an intra-frequency Unit: None foreign key parameters. The MAE does
neighboring cell Identity-related
not optimize theparameters:
values of these include
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an intra-frequency Unit: None foreign key parameters. The MAE does
neighboring cell Range-value
not optimize the parameters:
values of include
these the
Use this command to parameters
parameters. for which the MAE calculates
modify the information Value Range: -20 to 20 optimization values according to
about an intra-frequency Unit: 0.5 dB algorithm requirements
Fixed-value parameters:and the value
includes the
Use this command
neighboring cell to range of each
parameters forparameter
which the on MAE theprovides
MAE
add cell-oriented client
built-inordefault
on NEs.values that cannot be
coverage-based inter- Default Value: 26
modified by users. The MAE delivers the
RAT handover Unit: dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
add cell-oriented on the objects that are filtered according
parameters built-in default values that cannot be
coverage-based inter- Default Value: 26 to algorithm requirements.
modified by users. The MAE delivers the
RAT handover Unit: dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
modify cell-oriented on the objects that are filtered according
parameters built-in default values that cannot be
coverage-based inter- Default Value: 26 to algorithm requirements.
modified by users. The MAE delivers the
RAT handover Unit: dBm Fixed-value
Use this command to fixed values parameters: includesbased
of these parameters the
measurement algorithm parameters for which the MAE provides
modify cell-oriented on the objects that are filtered according
parameters built-in default values that cannot be
coverage-based inter- Default Value: 26 to algorithm requirements.
modified by users. The MAE delivers the
RAT handover Unit: dBm
Use this command to fixed values of these
Identity-related parameters
parameters: based
include
measurement algorithm
modify cell-oriented on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
parameters
coverage-based inter- GUI Value Range: 0 to 65535 to algorithm
MCC, and therequirements.
MOC primary key and
RAT handover Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
Use this command
measurement to
algorithm not optimizefor thewhich
values
parameters theofMAE
theseprovides
modify cell-oriented
parameters parameters.
built-in default values that cannot be
coverage-based inter- Default Value: 26
modified by users. The MAE delivers the
RAT handover Unit: dBm
Use this command to fixed values of these
Identity-related parameters
parameters: based
include
measurement algorithm
add cell-oriented on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
parameters
coverage-based inter- GUI Value Range: 0 to 65535 to algorithm
MCC, and therequirements.
MOC primary key and
RAT handover Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
Use this command
measurement to
algorithm not optimizefor thewhich
values
parameters theofMAE
theseprovides
add cell-oriented
parameters parameters.
built-in default values that cannot be
coverage-based inter- Default Value: 26
modified by users. The MAE delivers the
RAT handover Unit: dBm
fixed values of these parameters based
measurement algorithm Non-MAE-optimized parameters: include
Use this command to on the objects that are filtered according
parameters the non-identity-related parameters that
query the allocated to algorithm requirements.
NA the MAE does not optimize. The MAE
values and license
obtains the values of these parameters
usage of operators Non-MAE-optimized parameters: include
Use this command to from NEs.
the non-identity-related parameters that
query the allocated
NA the MAE does not optimize. The MAE
values and license
obtains the values of these parameters
usage of operators
from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第458页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides
Default Value: built-in default values that cannot be
Set Connection-Oriented
DR_RRC_DRD_SWITCH: ON modified by users. The MAE delivers the
Algorithm Switches
Unit: None fixed values of these
Identity-related parameters
parameters: based
include
Use this command to on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
to algorithm
modify the cell oriented GUI Value Range: 0 to 65535 MCC, and therequirements.
MOC primary key and
parameters for distance Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
based RRC redirection not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
Use this command to parameters.
built-in default values that cannot be
modify the cell oriented Default Value: ON
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
modify the cell oriented Value Range: 0 to 255 to algorithm requirements.
optimization values according to
parameters for distance Unit: 3chip algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to client ordefault
on NEs.
built-in values that cannot be
modify the cell oriented Default Value: 50
modified by users. The MAE delivers the
parameters for distance Unit: % Fixed-value
fixed values parameters: includesbased
of these parameters the
based RRC redirection parameters for which the MAE provides
Use this command to on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modify the cell oriented Default Value: 75
modified by users. The MAE delivers the
parameters for distance Unit: %
fixed values of these parameters based
based RRC redirection Value Range: Band1, Band2, Range-value parameters: include the
Use this command to on the objects
Band3, Band4, Band5, Band6, parameters forthat
whicharethe
filtered
MAEaccording
calculates
modify the cell oriented Band7, Band8, Band9, to algorithm requirements.
optimization values according to
parameters for distance DependOnNCell, algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection BandIndNotUsed range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to Unit: None client
built-inordefault
on NEs.values that cannot be
modify the cell oriented Default Value: FALSE
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
modify the cell oriented Value Range: 0 to 16383 to algorithm requirements.
optimization values according to
parameters for distance Unit: None algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to client
built-inordefault
on NEs.values that cannot be
modify the cell oriented Default Value: ON
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
modify the cell oriented Value Range: 0 to 255 to algorithm requirements.
optimization values according to
parameters for distance Unit: 3chip algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to client
built-inordefault
on NEs.values that cannot be
modify the cell oriented Default Value: 50
modified by users. The MAE delivers the
parameters for distance Unit: % Fixed-value
fixed values parameters: includesbased
of these parameters the
based RRC redirection parameters for which the MAE provides
Use this command to on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
modify the cell oriented Default Value: 75
modified by users. The MAE delivers the
parameters for distance Unit: %
fixed values of these
Identity-related parameters
parameters: based
include
based RRC redirection
Use this command to set on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
the cell oriented to algorithm
GUI Value Range: 0 to 65535 MCC, and therequirements.
MOC primary key and
parameters for distance Unit: None foreign key parameters.
Fixed-value parameters:The MAE the
includes does
based RRC redirection not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
Use this command to set parameters.
built-in default values that cannot be
the cell oriented Default Value: ON
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to set on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
the cell oriented Value Range: 0 to 255 to algorithm requirements.
optimization values according to
parameters for distance Unit: 3chip algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to set client ordefault
on NEs.
built-in values that cannot be
the cell oriented Default Value: 50
modified by users. The MAE delivers the
parameters for distance Unit: %
fixed values of these parameters based
based RRC redirection
on the objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第459页，共633页

 686970386.xls 文档密级
Fixed-value parameters: includes the
parameters for which the MAE provides
Use this command to set
built-in default values that cannot be
the cell oriented Default Value: 75
modified by users. The MAE delivers the
parameters for distance Unit: %
Value Range: Band1, Band2, fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to set Band3, Band4, Band5, Band6, parameters on the objects forthat
whicharethe
filtered
MAEaccording
calculates
the cell oriented Band7, Band8, Band9, to algorithm requirements.
optimization values according to
parameters for distance DependOnNCell, algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection BandIndNotUsed range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to set Unit: None client ordefault
on NEs.
built-in values that cannot be
the cell oriented Default Value: FALSE
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to set on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
the cell oriented Value Range: 0 to 16383 to algorithm requirements.
optimization values according to
parameters for distance Unit: None algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to set client ordefault
on NEs.
built-in values that cannot be
the cell oriented Default Value: ON
modified by users. The MAE delivers the
parameters for distance Unit: None
fixed values ofparameters:
Range-value these parameters
includebased
the
based RRC redirection
Use this command to set on the objects
parameters forthat
whicharethe
filtered
MAEaccording
calculates
the cell oriented Value Range: 0 to 255 to algorithm requirements.
optimization values according to
parameters for distance Unit: 3chip algorithm requirements
Fixed-value parameters:and the value
includes the
based RRC redirection range of each
parameters forparameter
which the on MAE theprovides
MAE
Use this command to set client
built-inordefault
on NEs.values that cannot be
the cell oriented Default Value: 50
modified by users. The MAE delivers the
parameters for distance Unit: % Fixed-value
fixed values parameters: includesbased
of these parameters the
based RRC redirection parameters for which the MAE provides
Use this command to set on the objects that are filtered according
built-in default
to algorithm values that cannot be
requirements.
the cell oriented Default Value: 75
modified by users. The MAE delivers the
parameters for distance Unit: % Fixed-value
Modify the basic fixed values parameters: includesbased
of these parameters the
based RRC redirection parameters for which the MAE provides
Use this command
information of a cell,to set Default Value: on the objects that are filtered according
built-in default values that cannot be
the connection-oriented
including Max transmit PERFENH_RRC_REDIR_PRO to algorithm requirements.
modified by users. The MAE delivers the
algorithm
power parameters
of cell, Num of of TECT_SWITCH: ON
Modify fixed values of these
Identity-related parameters
parameters: based
include
an RNCthe basic
continuous in sync ind, Unit: None
information of a cell, on the objects
parameters suchthatasare filtered
CellId, according
IDTYPE,
Num of continuous out to algorithm requirements.
including Max transmit GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
of sync ind, Radio link
power of cell, Num of Unit: None foreign key parameters. The MAE does
failure timer Length, and Range-value parameters:
continuous not optimize the values of include
these the
the transmitinpower sync ofind, the parameters for which the MAE calculates
Num of continuous parameters.
downlink common out Value Range: -100 to 500 optimization values according to
of sync ind,
channels Radio
such as link Unit: 0.1 dBm algorithm requirements and the value
failure timer Length, and Identity-related parameters:
PSCH, SSCH, PCPICH range of each parameter on include
the MAE
the
Use
and transmit
this
BCH power
command of
to the
set parameters such as CellId, IDTYPE,
If the intra-frequency client or on NEs.
downlink
the common
cell oriented GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
load balancing
channels
parameters such algorithm
for as
distance Unit: None foreign key parameters. The MAE does
or downlink-load-based
PSCH,
based SSCH,
RRC PCPICH
redirection not optimize the values
Non-MAE-optimized of these include
parameters:
dynamic
and
Use BCH
this pilot powerto
command parameters.
the non-identity-related parameters that
If the intra-frequency
adjustment algorithm is NA
modify
load algorithm
balancing algorithm the MAE does not optimize. The MAE
enabled
switches for
of aa cell.
cell in a obtains the values of these parameters
or downlink-load-based Identity-related parameters: include
power adjustment from NEs.
dynamic pilot power parameters such as CellId, IDTYPE,
association
If group, the
the intra-frequency
adjustment algorithm GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
MAEbalancing
load modifies the pilotis
algorithm
enabled for a cell in a Unit: None foreign key parameters. The MAE does
power of the cell along Range-value parameters:
or downlink-load-based
power adjustment not optimize the values of include
these the
with its maximum
dynamic pilot powerand parameters for which the MAE calculates
association group, the parameters.
minimum P-CPICH
adjustment algorithm is Value Range: -100 to 500 optimization values according to
MAE
transmitmodifies
powers. the pilot
enabled for acell
cellalong
in a Unit: 0.1dBm algorithm requirements and the value
power of the Range-value
Use this
power command to
adjustment range of eachparameters:
parameter on include the
the MAE
with
modifyits the
maximum
power and parameters for which the MAE calculates
association group, the client or on NEs.
minimum
information P-CPICH
of atheP-pilot Value Range: -100 to 500 optimization values according to
MAE
transmitmodifies
powers.
CPICH.of the cell along Unit: 0.1dBm algorithm requirements and the value
power Identity-related parameters:
Use this command to range of each parameter on include
the MAE
with
modifyits the
maximum
power and parameters such as CellId, IDTYPE,
client or on NEs.
minimum
Use
information P-CPICH
this command
of a P- to GUI Value Range: 0 to 125 MCC, and the MOC primary key and
transmit
modify
CPICH. anpowers.
RET subunit. Unit: None foreign key parameters. The MAE does
Use this command to not optimize the values of these
modify the power parameters.
information of a P-
CPICH.
08/24/2023 华为保密信息,未经授权禁止扩散 第460页，共633页
 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
Use this command to GUI Value Range: 1 to 8 MCC, and the MOC primary key and
modify an RET subunit. Unit: None foreign key parameters. The MAE does
Range-value parameters: include the
not optimize the values of these
parameters for which the MAE calculates
parameters.
Use this command to Value Range: 0 to 80 optimization values according to
modify an RET subunit. Unit: 0.1 degree algorithm requirements and the value
range of each parameter on the MAE
Use this command to
client or on NEs.
query different
Use this command to – –
application
query RNC type of RNC
parameters
level MR
related toswitch.
the collecting
of measurement reports
used in network – –
performance analysis, Identity-related parameters: include
Use this planning,
network command to
parameters such as CellId, IDTYPE,
query the dynamic
network optimization, GUI Value Range: 0 to 125 MCC, and the MOC primary key and
information in the
and call history analysis. Unit: None foreign key parameters. The MAE does
remote electrical tilting Identity-related
Use not optimize theparameters: include
values of these
(RET) device data. to
this command
parameters such as CellId, IDTYPE,
query the dynamic parameters.
GUI Value Range: 1 to 8 MCC, and the MOC primary key and
information in the
Unit: None foreign key parameters. The MAE does
remote electrical tilting Identity-related
not optimize theparameters: include
values of these
(RET) device data. parameters such as CellId, IDTYPE,
parameters.
Modify cell selection and GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
reselection information. Unit: None foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE calculates
Modify cell selection and Value Range: -16 to 10, 127 optimization values according to
reselection information. Unit: 2dB algorithm requirements and the value
Identity-related parameters:
range of each parameter on include
the MAE
Use this command to
parameters such
client or on NEs. as CellId, IDTYPE,
modify cell-oriented Call
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
Admission Control
Unit: None foreign key parameters. The MAE does
(CAC) algorithm Range-value parameters:
Use this command to not optimize the values of include
these the
parameters. parameters for which the MAE calculates
modify cell-oriented Call parameters.
Value Range: 0 to 100 optimization values according to
Admission Control
Unit: % algorithm requirements and the value
(CAC) algorithm Identity-related parameters:
Use this command to range of each parameter on include
the MAE
parameters. parameters such as CellId, IDTYPE,
add cell-oriented Call client or on NEs.
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
Admission Control
Unit: None foreign key parameters. The MAE does
(CAC) algorithm Range-value parameters:
Use this command to not optimize the values of include
these the
parameters. parameters for which the MAE calculates
add cell-oriented Call parameters.
Value Range: 0 to 100 optimization values according to
Admission Control
Unit: % algorithm requirements and the value
(CAC) algorithm Identity-related parameters:
Use this command to range of each parameter on include
the MAE
parameters. parameters such as CellId, IDTYPE,
modify the Cell-Oriented client or on NEs.
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
Directed Retry Decision
Unit: None foreign key parameters. The MAE does
(DRD) algorithm Range-value parameters:
Use this command to not optimize the values of include
these the
parameters of a cell. parameters for which the MAE calculates
modify the Cell-Oriented parameters.
Value Range: 50 to 200 optimization values according to
Directed Retry Decision
Unit: dB algorithm requirements and the value
(DRD) algorithm Range-value
Use this command to range of eachparameters:
parameter oninclude the
the MAE
parameters of a cell. parameters for which the MAE calculates
modify the Cell-Oriented client or on NEs.
Value Range: 50 to 200 optimization values according to
Directed Retry Decision
Unit: dB algorithm requirements and the value
(DRD) algorithm Identity-related parameters:
range of each parameter on include
the MAE
parameters
Use of a cell.
this command to parameters such as CellId, IDTYPE,
client or on NEs.
modify the information GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. Identity-related
not optimize theparameters: include
values of these
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第461页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
Use this command to parameters such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. Identity-related
not optimize theparameters: include
values of these
Use this command to parameters
parameters. such as CellId, IDTYPE,
modify the information GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
about an inter-frequency Unit: None foreign key parameters. The MAE does
neighboring cell. not optimize the values
Non-MAE-optimized of these include
parameters:
Use this command to parameters.
the non-identity-related parameters that
modify the information
NA the MAE does not optimize. The MAE
about an inter-frequency
obtains the values of these parameters
neighboring cell. Non-MAE-optimized parameters: include
Use this command to from NEs.
the non-identity-related parameters that
modify the information
NA the MAE does not optimize. The MAE
about an inter-frequency
obtains the values
Range-value of theseinclude
parameters: parameters
the
neighboring cell.
Use this command to from NEs. for which the MAE calculates
parameters
modify the information Value Range: -50 to 50 optimization values according to
about an inter-frequency Unit: dB algorithm requirements and the value
neighboring cell. to Identity-related parameters:
range of each parameter on include
the MAE
Use this command
parameters such
client or on NEs. as CellId, IDTYPE,
add the Cell-Oriented
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
Directed Retry Decision
Unit: None foreign key parameters. The MAE does
(DRD) algorithm
Use this command to not optimize the values
Non-MAE-optimized of these include
parameters:
parameters to a cell.
add the Cell-Oriented parameters.
the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
parameters to a cell. from NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第462页，共633页

 686970386.xls 文档密级

Use this command to Non-MAE-optimized parameters: include

add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values of these parameters
Use this command
parameters to
to a cell. Non-MAE-optimized
from NEs. parameters: include
add the Cell-Oriented the non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values
Range-value of theseinclude
parameters: parameters
the
Use this command
parameters to
to a cell. from NEs. for which the MAE calculates
parameters
add the Cell-Oriented
Value Range: 50 to 200 optimization values according to
Directed Retry Decision
Unit: dB algorithm requirements and the value
(DRD) algorithm Range-value
Use this command to range of eachparameters:
parameter on include the
the MAE
parameters to a cell. parameters for which the MAE calculates
add the Cell-Oriented client or on NEs.
Value Range: 50 to 200 optimization values according to
Directed Retry Decision
Unit: dB algorithm requirements and the value
(DRD) algorithm
Use this command to range of each parameter
Non-MAE-optimized on the MAE
parameters: include
parameters to a cell.
add the Cell-Oriented client
the or on NEs.
non-identity-related parameters that
Directed Retry Decision NA the MAE does not optimize. The MAE
(DRD) algorithm obtains the values
Identity-related of these parameters
parameters: include
parameters to a cell. from NEs. such as CellId, IDTYPE,
parameters
Use this command to
GUI Value Range: 0 to 4095 MCC, and the MOC primary key and
add an intra-frequency
Unit: None foreign key parameters. The MAE does
neighboring cell. Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
Use this command to
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
add an intra-frequency
Unit: None foreign key parameters. The MAE does
neighboring cell. Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
Use this command to
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
add an intra-frequency
Unit: None foreign key parameters. The MAE does
neighboring cell.
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第463页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
Use this command to
GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
add an intra-frequency
Unit: None foreign key parameters. The MAE does
neighboring cell. Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE calculates
Use this command to
Value Range: -20 to 20 optimization values according to
add an intra-frequency
Unit: 0.5dB algorithm
Range-value requirements
parameters and the defined
(User value
neighboring cell.
range of include
priority): each parameter on the MAE
the parameters for
Use this command to Value Range: AFFECT, client or
which theonMAE
NEs.calculates optimization
add an intra-frequency NOT_AFFECT values according to algorithm
neighboring cell. Unit: None Range-value
requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to Value Range: AFFECT, which
NEs. the MAE calculates optimization
add an intra-frequency NOT_AFFECT values according to algorithm
neighboring cell. Unit: None Range-value
requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: FALSE, TRUE
add an intra-frequency values according to algorithm
Unit: None Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: -50 to 50
add an intra-frequency values according to algorithm
Unit: dB Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: -50 to 50
add an intra-frequency values according to algorithm
Unit: dB Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: FALSE, TRUE
add an intra-frequency values according to algorithm
Unit: None Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: -50 to 50
add an intra-frequency values according to algorithm
Unit: dB Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to which
NEs. the MAE calculates optimization
Value Range: -50 to 50
add an intra-frequency values according to algorithm
Unit: dB Range-value
neighboring cell. requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to Value Range: D0, D10, D20, which
NEs. the MAE calculates optimization
add an intra-frequency D30, D40, D50, D60 values according to algorithm
neighboring cell. Unit: s Range-value
requirements parameters
and the value (User
range defined
of
priority): include the parameters
each parameter on the MAE client foror on
Use this command to Value Range: D3, D6, D9, which
NEs. the MAE calculates optimization
add an intra-frequency D12, D15, D18, D21, INFINITY values according to algorithm
neighboring cell. Unit: dB Range-value
requirements parameters
and the value (User
range defined
of
priority): include on
each parameter thethe
parameters
MAE client foror on
Use this command to Value Range: D2, D3, D4, D6, which
NEs. the MAE calculates optimization
add an intra-frequency D8, D10, D12, INFINITY values according to algorithm
neighboring cell. Unit: dB requirements parameters:
Range-value and the value range the
include of
each parameter
parameters on thethe
for which MAEMAE client or on
calculates
Use this command to NEs.
Value Range: FALSE, TRUE optimization values according to
add an intra-frequency
Unit: None algorithm requirements and the value
neighboring cell. Range-value
range of eachparameters:
parameter on include
the MAE the
parameters for
client or on NEs. which the MAE calculates
Use this command to
Value Range: 0 to 30 optimization values according to
add an intra-frequency
Unit: None algorithm requirements
Range-value parameters and the defined
(User value
neighboring cell.
range of include
priority): each parameter on the MAE
the parameters for
Use this command to client or
which theonMAE
NEs.calculates optimization
Value Range: FALSE, TRUE
add an intra-frequency values according to algorithm
Unit: None Fixed-value
neighboring cell. requirementsparameters:
and the valueincludes
range the of
parameters for which the MAE
each parameter on the MAE client provides
or on
Use this command to built-in
NEs. default values that cannot be
Default Value: SONOPTI
add an intra-frequency modified by users. The MAE delivers the
Unit: None
neighboring cell. fixed values of these parameters based
on the objects that are filtered according
to algorithm requirements.

08/24/2023 华为保密信息,未经授权禁止扩散 第464页，共633页

Use this command to 686970386.xls 文档密级
add a UMTS cell under
the neighboring Identity-related parameters: include
BSC6900/RNC. This parameters such as CellId, IDTYPE,
Use this command
command to
is applicable GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
add a UMTS cell under
to the scenarios such as Unit: None foreign key parameters. The MAE does
the
the neighboring
inter-Iur intra- Identity-related
not optimize theparameters: include
values of these
BSC6901/RNC.
frequency Thisor
handover parameters
parameters. such as CellId, IDTYPE,
Use this command
command is to
applicable GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None foreign key parameters. The MAE does
the
the neighboring
inter-Iur intra- Identity-related
not optimize theparameters: include
values of these
GUI Value Range:
BSC6902/RNC.
frequency Thisor
handover parameters
parameters. such as CellId, IDTYPE,
Use this command to SINGLE_HOST,
command is
inter-frequency applicable MCC, and the MOC primary key and
add a UMTS cell under DOUBLE_HOST,
to the scenarios such as
handover. foreign key parameters. The MAE does
the DOUBLE_HOST_OUT_POOL Identity-related parameters: include
the neighboring
inter-Iur intra- not optimize the values of these
BSC6903/RNC. Thisor Unit: None parameters
frequency
Use handover
this command to GUI Value Range: 1 to 64 parameters.such as CellId, IDTYPE,
command is
inter-frequency applicable MCC, and the MOC primary key and
add a UMTS cell under characters
to the scenarios such as
handover. foreign key parameters. The MAE does
the Unit: None
the neighboring
inter-Iur intra- Identity-related
not optimize theparameters: include
values of these
BSC6904/RNC.
frequency Thisor
handover parameters
parameters. such as CellId, IDTYPE,
Use this command
command is to
applicable GUI Value Range: 0 to 31 MCC, and the MOC primary key and
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None foreign key parameters. The MAE does
the
the neighboring
inter-Iur intra- Range-value
not optimize theparameters:
values of include
these the
BSC6905/RNC.
frequency Thisor
handover parameters
parameters. for which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 511 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value parameters: include the
Value Range: Band1, Band2, range of each parameter on the MAE
BSC6906/RNC.
frequency Thisor
handover parameters for which the MAE calculates
Use this command to Band3, Band4, Band5, Band6, client or on NEs.
command is
inter-frequency applicable optimization values according to
add a UMTS cell under Band7, Band8, Band9,
to the scenarios such as
handover. algorithm requirements and the value
the BandIndNotUsed
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6907/RNC. Thisor Unit: None parameters for which the MAE calculates
frequency
Use handover
this command to client or on NEs.
command is
inter-frequency applicable Value Range: TRUE, FALSE optimization values according to
add
to a UMTS cell under
the scenarios such as Unit: None algorithm requirements and the value
handover.
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6908/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 16383 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6909/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 16383 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6910/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 4095 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None algorithm
Range-value requirements
parameters and the defined
(User value
the
the neighboring
inter-Iur intra- range of include
each parameter on the MAE
priority): the parameters for
BSC6911/RNC.
frequency Thisor
handover client or
Use this command to which theonMAE
NEs.calculates optimization
command is
inter-frequency applicable Value Range: FALSE, TRUE
add a UMTS cell under values according to algorithm
to the scenarios such as
handover. Unit: None
the requirements parameters:
and the value range theof
the neighboring
inter-Iur intra- Range-value include
BSC6912/RNC. Thisor each parameter
parameters on thethe
for which MAE
MAE client or on
calculates
frequency
Use handover
this command to Value Range: 1 to 65533,
command is applicable NEs.
optimization values according to
inter-frequency
add a UMTS cell under 65535
to the scenarios such as
handover. algorithm requirements and the value
the Unit: None
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6913/RNC.
frequency Thisor
handover parameters for which the MAE calculates
Use this command to Value Range: NOT_REQUIRE, client or on NEs.
command is
inter-frequency applicable optimization values according to
add a UMTS cell under REQUIRE
to the scenarios such as
handover. algorithm requirements and the value
the Unit: None
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6914/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 255 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: None algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6915/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 20 to 255 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: frame algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter on include
the MAEthe
BSC6916/RNC.
frequency handover Thisor parameters for
client or on NEs. which the MAE calculates
command is
inter-frequency applicable Value Range: 20 to 255 optimization values according to
to the scenarios such as
handover. Unit: frame algorithm requirements and the value
the inter-Iur intra- range of each parameter on the MAE
frequency handover or client or on NEs.
inter-frequency
handover.
08/24/2023 华为保密信息,未经授权禁止扩散 第465页，共633页
Use this command to 686970386.xls 文档密级
add a UMTS cell under
the neighboring Range-value parameters: include the
BSC6917/RNC. This parameters for which the MAE calculates
Use this command
command to
is applicable Value Range: 0 to 1000 optimization values according to
add a UMTS cell under
to the scenarios such as Unit: ms algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter oninclude the
the MAE
BSC6918/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 1000 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: ms algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter oninclude the
the MAE
BSC6919/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 0 to 1000 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: ms algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter oninclude the
the MAE
BSC6920/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 1 to 255 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: 10ms algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter oninclude the
the MAE
BSC6921/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 1 to 255 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: 10ms algorithm requirements and the value
the
the neighboring
inter-Iur intra- Range-value
range of eachparameters:
parameter oninclude the
the MAE
BSC6922/RNC.
frequency Thisor
handover parameters for
client or on NEs. which the MAE calculates
Use this command
command is to
applicable Value Range: 1 to 255 optimization values according to
inter-frequency
add a UMTS cell under
to the scenarios such as
handover. Unit: 10ms algorithm
Range-value requirements
parametersand the defined
(User value
the
the neighboring
inter-Iur intra- range of include
each parameter on the MAE
priority): the parameters for
BSC6923/RNC.
frequency Thisor
handover client or
Use this command to which theonMAE
NEs.calculates optimization
command is
inter-frequency applicable Value Range: FALSE, TRUE
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6924/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: -24 to 0 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: dB Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6925/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: FALSE, TRUE NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6926/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: -58 to -13 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: 2dBm Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6927/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: FALSE, TRUE NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6928/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: -2 to -1 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: 2dBm Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include on
thethe
parameters foror on
BSC6929/RNC. Thisor each parameter MAE client
frequency handover which
Use this command
command is to
applicable Value Range: FALSE, TRUE NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6930/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: -50 to 33 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: dBm Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6931/RNC. Thisor each parameter on the MAE client
frequency handover Value Range: USED, which
Use this command
command is to
applicable NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under NOT_USED values according to algorithm
to the scenarios such as Range-value
handover.
the Unit: None requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6932/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: 0 to 7 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters (User
and the value defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6933/RNC. Thisor each parameter on the MAE client
frequency handover which
command is applicable Value Range: 0 to 99 NEs. the MAE calculates optimization
inter-frequency values according to algorithm
to the scenarios such as
handover. Unit: dB; dBm
requirements and the value range of
the inter-Iur intra-
each parameter on the MAE client or on
frequency handover or
NEs.
inter-frequency
handover.
08/24/2023 华为保密信息,未经授权禁止扩散 第466页，共633页
Use this command to 686970386.xls 文档密级
add a UMTS cell under
Range-value parameters (User defined
the neighboring
priority): include the parameters for
BSC6934/RNC. This
Use this command to which the MAE calculates optimization
command is applicable Value Range: FALSE, TRUE
add a UMTS cell under values according to algorithm
to the scenarios such as Unit: None Range-value
the requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6935/RNC. Thisor Value Range: each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable STTD_Supported, NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according to algorithm
to the scenarios such as STTD_not_Supported
Value Range: Range-value
handover.
the requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- Unit: None
DELAY_ACTIVATION_SUPPO priority): include the parameters foror on
BSC6936/RNC. Thisor each parameter on the MAE client
frequency handover RT, HSDSCH_SUPPORT,
Value Range: CP1_Supported, which
Use this command
command is to
applicable NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under FDPCH_SUPPORT,
CP1_not_Supported values according to algorithm
to the scenarios such as Range-value
handover.
the EDCH_SUPPORT,
Unit: None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6937/RNC. Thisor EDCH_2MS_TTI_SUPPORT, each parameter on the MAE client
frequency handover Value Range: OFFSET1, which
Use this command
command is to
applicable EDCH_2SF2_AND_2SF4_SU NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under OFFSET2 values according to algorithm
to the scenarios such as PPORT, Range-value
handover.
the Unit: None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- EDCH_2SF2_SUPPORT, priority): include the parameters foror on
BSC6938/RNC. Thisor EDCH_2SF4_SUPPORT, each parameter on the MAE client
frequency handover Value Range: None, STTD, which
Use this command
command is to
applicable EDCH_SF4_SUPPORT, NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under CP1 values according to algorithm
to the scenarios such as Range-value
handover.
the EDCH_SF8_SUPPORT,
Unit: None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- EDCH_HARQ_IR_COMBIN_S priority): include the parameters foror on
BSC6939/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable UPPORT,
Value Range: None, STTD NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under EDCH_HARQ_CHASE_COMB values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- IN_SUPPORT, priority): include the parameters foror on
BSC6940/RNC. Thisor CPC_DTX_DRX_SUPPORT, each parameter on the MAE client
frequency handover Value Range: None, STTD, which
Use this command
command is to
applicable CPC_HS_SCCH_LESS_OPER NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under CP1 values according to algorithm
to the scenarios such as Range-value
handover.
the _SUPPORT,
Unit: None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- HSPAPLUS_MIMO_SUPPOR priority): include the parameters foror on
BSC6941/RNC. Thisor each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable T,
Value Range: None, STTD NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under FLEX_MACD_PDU_SIZE_SU values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- PPORT, priority): include the parameters foror on
BSC6942/RNC. Thisor FDPCH_SLOT_FORMAT_SU each parameter on the MAE client
frequency handover which
Use this command
command is to
applicable Value Range: None, STTD
PPORT, NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under values according
Fixed-value to algorithm
parameters: include the
to the scenarios such as
handover. Unit: None
HSPAPLUS_DL_64QAM_SUP
the requirementsforand the the
value range of
the neighboring
inter-Iur intra- PORT
parameters which MAE provides
BSC6943/RNC. Thisor each parameter
built-in on thethat
default values MAE areclient or on
displayed
frequency
Use handover
this command to Default Value:
command is applicable NEs.
on the MAE client and can be modified
inter-frequency
add a UMTS cell under DELAY_ACTIVATION_SUPPO
to the scenarios such as
handover. by users. Theparameters
Range-value MAE delivers the defined
(User fixed
the RT-0&HSDSCH_SUPPORT-
the neighboring
inter-Iur intra- values ofinclude
priority): these parameters
the parametersbased foron the
BSC6944/RNC. Thisor 0&FDPCH_SUPPORT-
frequency
Use handover
this command to Value Range: FORBIDDEN, objectsthe
which that are calculates
MAE filtered according to
optimization
command is applicable 0&EDCH_SUPPORT-
inter-frequency
add a UMTS cell under NOT_FORBIDDEN algorithm
values requirements.
according to algorithm
to the scenarios such as 0&EDCH_2MS_TTI_SUPPOR Range-value
handover.
the Unit:
T- None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- priority): include the parameters foror on
BSC6945/RNC. Thisor 0&EDCH_2SF2_AND_2SF4_S each parameter on the MAE client
frequency handover Value Range: Mode0, Mode1 which
Use this command
command is to
applicable UPPORT- NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under Default Value: Mode0 values according to algorithm
to the scenarios such as Range-value
handover.
the 0&EDCH_2SF2_SUPPORT-
Unit: None requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- 0&EDCH_2SF4_SUPPORT- priority): include on
thethe
parameters foror on
BSC6946/RNC. Thisor each parameter MAE client
frequency handover which
Use this command
command is to
applicable 0&EDCH_SF4_SUPPORT-
Value Range: -20 to 20 NEs. the MAE calculates optimization
inter-frequency
add a UMTS cell under 0&EDCH_SF8_SUPPORT- values according
Fixed-value to algorithm
parameters: include the
to the scenarios such as
handover. Unit: 0.5dB
the requirementsforand the the
value range of
the neighboring
inter-Iur intra- 0&EDCH_HARQ_IR_COMBIN parameters which MAE provides
BSC6947/RNC. Thisor _SUPPORT- each parameter
built-in on thethat
default values MAE areclient or on
displayed
frequency
Use handover
this command to Value Range: FALSE, TRUE
command is applicable 0&EDCH_HARQ_CHASE_CO NEs.
on the MAE client and can be modified
inter-frequency
add a UMTS cell under Default value: FALSE
to the scenarios such as
handover. MBIN_SUPPORT- by users. Theparameters
Range-value MAE delivers the defined
(User fixed
the Unit: None
the neighboring
inter-Iur intra- 0&CPC_DTX_DRX_SUPPORT values ofinclude
priority): these parameters
the parametersbased foron the
BSC6948/RNC.
frequency Thisor
handover objectsthethat are calculates
filtered according to
Use this command to - which MAE optimization
command is
inter-frequency applicable Value Range: FALSE, TRUE algorithm requirements.
add a UMTS cell under 0&CPC_HS_SCCH_LESS_OP values according to algorithm
to the scenarios such as Unit: None Range-value
handover.
the requirements parameters
and the value (User defined
range of
the neighboring
inter-Iur intra- ER_SUPPORT- priority): include the parameters foror on
BSC6949/RNC. Thisor 0&HSPAPLUS_MIMO_SUPPO each parameter on the MAE client
frequency handover which
command is applicable Value
RT- Range: FALSE, TRUE NEs. the MAE calculates optimization
inter-frequency values according to algorithm
to the scenarios such as
handover. Unit: None
0&FLEX_MACD_PDU_SIZE_S requirements and
Identity-related the value range
parameters: includeof
the inter-Iur intra- UPPORT-
Use this command each parameter
suchonasthe MAEIDTYPE,
client or on
frequency handovertoor 0&FDPCH_SLOT_FORMAT_S
parameters CellId,
remove an intra- GUI Value Range: 0 to 4095 NEs. and the MOC primary key and
MCC,
inter-frequency UPPORT-
frequency
handover. neighboring Unit: None foreign key parameters. The MAE does
0&HSPAPLUS_DL_64QAM_S
cell. not optimize the values of these
UPPORT-0
parameters.
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第467页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
Use this command to parameters such as CellId, IDTYPE,
remove an intra- GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
frequency neighboring Unit: None foreign key parameters. The MAE does
cell. Identity-related
not optimize theparameters: include
values of these
Use this command to parameters
parameters. such as CellId, IDTYPE,
remove an intra- GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
frequency neighboring Unit: None foreign key parameters. The MAE does
cell. Identity-related
not optimize theparameters: include
values of these
Use this command to parameters
parameters. such as CellId, IDTYPE,
remove an intra- GUI Value Range: 0 to 65535 MCC, and the MOC primary key and
frequency neighboring Unit: None foreign key parameters. The MAE does
cell. not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第468页，共633页

 686970386.xls 文档密级

Optimization
MML Command Parameter Parameter
Indicates Description
the length of the UE
Type
inactivity timer. If the eNodeB
detects that a UE has neither
Parameter MOD received nor sent data for a
UeInactiveTimer
check RRCCONNSTATETIMER duration
Indicatesexceeding the value
the timer value of
of
Timer 300. For details,eNodeB
this parameter, the see
releases
Indicates
3GPP TSthe
the RRC
local connection
36.331. ID of the
Parameter for the UE.is started
MOD UETIMERCONST LocalCellId cell.
This Ittimer
uniquely identifies
whenathecell
check
within
UE sendsa BS.
RRCConnectionRequest.
Parameter
MOD UETIMERCONST T300
check Before the timer expires, it is
stopped if the UE receives
RRCConnectionSetup
Indicates or of
the timer value
Parameter RRCConnectionReject.
MOD UETIMERCONST T301 Timer 301. For details, see
check
3GPP TS 36.331.
After the timer expires, the UE
Parameter enters thethe
Indicates RRC_IDLE
length of state.
timer
MOD UETIMERCONST T311
check 311.

Parameter MOD Indicates the length of timer

T302
check RRCCONNSTATETIMER T302.

Indicates the local ID of the

Parameter
MOD CELLPDCCHALGO LocalCellId cell. It uniquely identifies a cell
check
within a BS.
Indicates the number of OFDM
Parameter
MOD CELLPDCCHALGO InitPdcchSymNum symbols initially
Indicates occupied
the switch used toby
check
the PDCCH.
enable or disable dynamic
adjustment on the number of
Parameter orthogonal frequency division
MOD CELLPDCCHALGO PdcchSymNumSwitch
check multiplexing (OFDM) symbols
occupied by the physical
Indicates the timer
downlink control governing
channel
MOD
Parameter S1MessageWaitingTi the period
(PDCCH). the eNodeB will wait
ENODEBCONNSTATETI
check mer for a response message from
MER
the MME.
MOD Indicates the timer for the
Parameter
ENODEBCONNSTATETI SecCmpWaitingTimer eNodeB to wait for a Security
check
MER Mode Complete message.
Indicates the timer for the
MOD
Parameter UpUeCapInfoWaitingT eNodeB to wait for an
ENODEBCONNSTATETI
check imer unprotected UE Capability
MER
Information message.
Indicates the timer governing
MOD
Parameter UuMessageWaitingTi the period the eNodeB will wait
ENODEBCONNSTATETI
check mer for a response message from
MER
a UE.
MOD Indicates the timer for the
Parameter WaitRrcConnSetupC
ENODEBCONNSTATETI eNodeB to wait for an RRC
check mpTimer
MER Connection Setup Complete.
Indicates the timer governing
MOD
Parameter X2MessageWaitingTi the period the eNodeB will wait
ENODEBCONNSTATETI
check mer for a response message from
MER
the neighboring eNodeB.
Parameter MOD Indicates the ID of the
RlcPdcpParaGroupId
check RLCPDCPPARAGROUP RLC/PDCP parameter group.

08/24/2023 华为保密信息,未经授权禁止扩散 第469页，共633页

 Indicates the eNodeB-specific文档密级
686970386.xls
maximum number of RLC
ARQ retransmissions, namely
the maximum number of AM
Parameter MOD ENodeBMaxRetxThre Indicates
PDU retransmissions.When
the UE-specific
check RLCPDCPPARAGROUP shold the numbernumber
maximum of retransmissions
of RLC
reaches
ARQ the value of this
retransmissions, namely
parameter,
the maximum eNodeB
number willof AM
Parameter MOD release the user.
UeMaxRetxThreshold PDU retransmissions.When
check RLCPDCPPARAGROUP
the number of retransmissions
reaches the value of this
Indicates
parameter, the local IDwill
eNodeB of the
Parameter
MOD RACHCFG LocalCellId cell. It uniquely
release the user. identifies a cell
check
within a BS.
Indicates the maximum step by which the
number
TX power of for
preamble
random access
Parameter
MOD RACHCFG PreambleTransMax transmission
preambles is times.For
increased details each
check
aboutafter
time this aparameter,
RACH access see
3GPP TSmultiple
failure.If 36.321.attempts to
Parameter access the PRACH fail, the UE
MOD RACHCFG PwrRampingStep
check increases the TX power for
random access preambles by
HO & MOD a step specified
Indicates the local byID thisof the
Reselection EUTRANINTRAFREQNC LocalCellId parameter
cell. It uniquely eachidentifies
time aftera an cell
optimization ELL accessafailure
within BS. to ensure
successful access.
HO & MOD Indicates the mobile country
Reselection EUTRANINTRAFREQNC Mcc code of the E-UTRAN
optimization ELL Indicates
neighboring thecell.
eNodeB identity
of the intra-frequency
HO & MOD Indicates thecell.
neighboring mobile network
It uniquely
Reselection EUTRANINTRAFREQNC Mnc code of the
identifies anE-UTRAN
eNodeB within a
optimization ELL Indicates
neighboring
PLMN. The the28-bit
local E-UTRAN
cell. identity of
the intra-frequency
cell identity is comprised of the
HO & MOD neighboring cell.the
It uniquely
cell identity
Indicates the andoffset eNodeB
for the
Reselection EUTRANINTRAFREQNC eNodeBId identifies a cell within an
identity (represented
intra-frequency by
neighboring the
optimization ELL eNodeB. The 28-bit E-UTRAN
most
cell, significant
which isisused 20 bits).
in The
cell
cell identity
global identity comprised
(CGI) of of an
the
HO & MOD evaluation for cell reselections.
cell identity
E-UTRAN (represented
cell ofis comprised by of
Reselection EUTRANINTRAFREQNC CellId A larger value thiseight bits)
the
the least
E-UTRAN significant
cell in
identity and
optimization ELL parameter results a lower
and
the the eNodeB
PLMN ID. Foridentity.
details, The see
probability
Indicates
cell global theof cell
identity reselections.
individual
(CGI) of an
HO & MOD 3GPP TS 36.413.
If this parameter
offset
E-UTRAN for the is not set toof
cellintra-frequency
is comprised
Reselection EUTRANINTRAFREQNC CellQoffset
dB0, it
neighboring is delivered
the E-UTRAN cellwhich cell, in SIB4.
identity For
is used
and
optimization ELL
details,
in see
evaluation 3GPP
for
the PLMN ID. For details, see TS 36.331.
handovers.It
HO & MOD If this parameter
affects
3GPP TSthe36.413. is setofto dB0,
probability
Reselection EUTRANINTRAFREQNC CellIndividualOffset it is not delivered
triggering in SIB4. In
intra-frequency
optimization ELL this situation, UEs
measurement use A
reports. 0 dB as
larger
the offset
value of thisfor parameter
cell reselections.
HO & Indicates
For details,
indicates athe seelocal
higher 3GPPID ofTS the
probability.
MOD Indicates the hysteresis for
Reselection LocalCellId cell.
36.304.
For It uniquely
details, see handoveridentifies
3GPP TSa cell
INTRAFREQHOGROUP intra-frequency
optimization within
36.331. a BS.
event A3.This parameter
HO & Indicates the
decreases ID of the
frequent event
MOD
Reselection IntraFreqHoGroupId parameterdue
triggering groupto related
radio to
signal
INTRAFREQHOGROUP
optimization intra-frequency
fluctuations andhandover.
reduces the
probability of handover
HO & Indicates the offset
MOD decision errors and for event
ping-pong
Reselection IntraFreqHoA3Hyst A3.If
INTRAFREQHOGROUP handovers. A larger value to
the parameter is set of a
optimization large value, an intra-frequency
this parameter results in a
handover
lower probability.is performedThe only
HO &
MOD when the signal quality of the
Reselection IntraFreqHoA3Offset hysteresis for event inter-
INTRAFREQHOGROUP neighboring cell
frequency handover event A3 is significantly
optimization
better
is the samethan that as theof the
valueserving
of this
cell and
parameter. other For triggering
details, see
Feature CNOPERATORINDE Indicates
conditions the index of the
are met. For details,
DSP LICINFO 3GPP TSthat 36.331.
optimization X operator
see 3GPP TSowns 36.331. the license.

08/24/2023 华为保密信息,未经授权禁止扩散 第470页，共633页

 686970386.xls 文档密级

Feature
DSP LICINFO FUNCTIONTYPE Indicates the function type.
optimization

Indicates the local ID of the

Feature
DSP CELL LocalCellId cell. It uniquely identifies a cell
optimization
within a BS.
Indicates the number of the
Feature
DSP BRDMFRINFO CN cabinet where the board is
optimization
located.

Feature the subrack number of the

DSP BRDMFRINFO SRN
optimization board.

Feature Indicates the slot number of

DSP BRDMFRINFO SN
optimization the board.

Indicates the local ID

CqiAdjAlgoSwitch: of the
Indicates
Feature MOD
LocalCellId cell.switch
the It uniquely
usedidentifies
to controla cell
optimization CELLALGOSWITCH
within a BS.
whether to allow the eNodeB
to adjust the UE-reported CQI
Feature MOD Indicates
based on whether
the initialtoblock
applyerror
CqiAdjAlgoSwitch MRC/IRC adaptation to the
optimization CELLALGOSWITCH rate (IBLER).
PUCCH/PRACH in
DlVarIBLERtargetSwitch: a cell.
PucchIrcSwitch:
Indicates whetherIf to this option is
enable
Feature MOD selected, MRC/IRC
downlink target IBLER adaptation
IrcSwitch
optimization CELLALGOSWITCH applies to the PUCCH. If this
adaptation.
option is deselected, MRC
applies tothe
Indicates thelocal
PUCCH. ID ofThethe
Power LBBPc does notidentifies
support a cell
MOD PDSCHCFG LocalCellId cell. It uniquely
optimization PUCCH MRC or IRC.
within
Indicatesa BS.
the cell reference
signal power of each physical
Power antenna. However, the cell
MOD PDSCHCFG ReferenceSignalPwr
optimization reference signal power
delivered in SIB2 is that of
each logical
Indicates theantenna.
number of the
Power
DSP TXBRANCH CN cabinet where the board is
optimization
located.
Indicates the subrack number
Power of the RRU or RFU where the
DSP TXBRANCH SRN
optimization TX channel of the RRU or RFU
is located.
Indicates the slot number of
Power the RRU or RFU where the TX
DSP TXBRANCH SN
optimization channel of the RRU or RFU is
located.
Power Indicates the number of the TX
DSP TXBRANCH TXNO
optimization channel of the RRU or RFU.

RET Indicates the device number of

MOD RETSUBUNIT DEVICENO
optimization the RET.

Indicates the number of the

RET
MOD RETSUBUNIT SUBUNITNO RET subunit, which starts from
optimization
1.
Indicates the antenna tilt of the
RET RET subunit. If this parameter
MOD RETSUBUNIT TILT
optimization is set to 32767, it is invalid and
the actual tilt is not changed.

08/24/2023 华为保密信息,未经授权禁止扩散 第471页，共633页

 686970386.xls 文档密级

Indicates the cell RX levelID of required

the
MOD
MLB LocalCellId
local
for cell. It uniquely
a neighboring cellidentifies
on the
EUTRANINTERNFREQ
a cell withintoan
frequency eNodeB.
Indicates the become DL
minimumEARFCN a
RXif of
candidate
the neighboring for reselection
cell on the the
MOD level
priority required
of the for a neighboring
MLB DlEarfcn neighboring
cell on than E-UTRANto is
the frequency
frequency
EUTRANINTERNFREQ higher that of the serving
frequency.
become For details,
a candidate forsee the
frequency.
3GPP TS 36.104. After
reselection if
measurements are started the priority of the
for
MOD frequency is lower than that of
MLB ThreshXhigh neighboring cells on the
EUTRANINTERNFREQ the serving frequency. After
frequency, the UE reselects to
measurements
a neighboring cell areon started
the for
neighboring
frequency only cells on the
if the RX level
MOD Indicates the measurement
MLB ThreshXlow frequency,
of the cell is thebetterUE reselects
than to
EUTRANINTERNFREQ triggering
a neighboring threshold cell on forthethe
value
reselectionspecified by this
to inter-frequency
frequency
parameter only
for a iftime-to-trigger.
the RX level
Indicates
or
of inter-RAT
the the
whether
serving local
cells.
cell IDlower
to
If
is of the
set
the the
cell
MLB MOD CELLRESEL LocalCellId For details,
cell. It
measurement
reselection uniquely seetriggering
priority 3GPP
identifies
of a TSa thancell
a specified threshold and that
36.331.
within
threshold
frequency a BS..
for
or reselection
RAT
of the cell is higher than the is higher to
inter-frequency
than
valuethat of the by
specified or inter-RAT
serving
this
SNonIntraSearchCfgI frequency,
cells. If
parameterthe this parameter
the UEs
forthreshold always
a time-to-trigger.is set to
MLB MOD CELLRESEL Indicates used in
nd NOT_CFG,
startdetails,
For inter-frequencythe UE
see 3GPP orTS inter-
the
RAT evaluation
continuously
measurements. of
measuresreselection
If theintra-
cellto
36.331.
a cell on a lower priority E-
frequency orpriority
reselection inter-RAT of a cells,
MLB MOD CELLRESEL SNonIntraSearch UTRAN
irrespective
frequency frequency
isof or onor
the signal
lower than an
inter-RAT
qualitytoofthat
equal frequency.
the of serving
the serving Cell
cell.
reselection
frequency ortoifathe cellcellon a lower
priority
reselection E-UTRAN priorityfrequency
of an RATor
MLB MOD CELLRESEL ThrshServLow on an inter-RAT
is lower than that of the frequency is
performed if
serving frequency, the UEsno cell on the
serving
Indicates frequency
the cell ID
start inter-frequency orof onthe
or a
inter-
MOD higher priority E-UTRAN
local cell. It uniquely
RAT measurements only when identifies
MLB EUTRANINTERFREQNC LocalCellId frequency fulfills criteria 1 for
a
thecell within
value of an
CelleNodeB.
selection RX
ELL inter-frequency and inter-RAT
level value (dB) is lower than
MOD reselections.
Indicates
or equal tothe the For
mobile details,
value country
of this see
MLB EUTRANINTERFREQNC Mcc 3GPP
code
parameter. ofTS the36.304.
E-UTRAN
ELL Indicates
neighboring thecell. eNodeB identity
of the inter-frequency
MOD Indicates thecell.
neighboring mobile network
It uniquely
MLB EUTRANINTERFREQNC Mnc code of the
identifies anE-UTRAN
eNodeB within a
ELL Indicates
neighboring
PLMN. Thethe28-bit local E-UTRAN
cell. identity of
the inter-frequency
cell identity is comprised of the
MOD neighboring cell.the It uniquely
cell identity
Indicates the and offset eNodeB
for the
MLB EUTRANINTERFREQNC eNodeBId identifies a cell within an
identity
inter-frequency(represented neighboringby the
ELL eNodeB. The 28-bit E-UTRAN
mostwhich
cell, significantis used 20 in bits). The
cell
cell identity
global identity is comprised (CGI) of of an
the
MOD evaluation for cell reselections.
cell
E-UTRANidentity (represented
cell of is comprised by of
MLB EUTRANINTERFREQNC CellId A larger value thiseight bits)
the
the least
E-UTRAN significant cell in identity and
ELL parameter results a lower
and
the the eNodeB
PLMN ID. Foridentity.
details, The see
probability
cell global of cell reselections.
MOD 3GPP
If TS 36.413.is(CGI)
identity of an
MLB EUTRANINTERFREQNC CellQoffset E-UTRAN cell is comprisedtoof
this parameter not set
dB0, it is delivered
the E-UTRAN in SIB5.and
cell identity For
ELL
details, see 3GPP
the PLMN ID. For details, see TS 36.331.
If this parameter
3GPP TS 36.413.is set to dB0,
it is not delivered in SIB5. In
this situation, UEs use 0 dB as
the offset for cell reselections.
For details, see 3GPP TS
36.304.

08/24/2023 华为保密信息,未经授权禁止扩散 第472页，共633页

 686970386.xls 文档密级

MAE Value Range and

NE Version Operation Description
Unit

Use this command to modify the Value Range: 0 to 3600

eNodeB eRAN7.0 and later parameters related to the timers Default Value: 20
of RRC connection control Unit: sRange:
Value
Use this command to modify the
settings of UE timers and MS100_T300,
GUI Value Range: 0 to
eNodeB eRAN7.0 and later constants. MS200_T300,
255
MS300_T300,
Unit: None
Use this command to modify the Value Range:
MS400_T300,
settings of UE timers and MS100_T301,
MS600_T300,
eNodeB eRAN7.0 and later constants. MS200_T301,
MS1000_T300,
MS300_T301,
MS1500_T300,
MS400_T301,
MS2000_T300
Use this command to modify the Value Range:
MS600_T301,
Default Value: FDD:
MS1000_T311,
eNodeB eRAN7.0 and later settings of UE timers and MS1000_T301,
MS200_T300; TDD:
constants MS3000_T311,
MS1500_T301,
MS1000_T300
MS5000_T311,
MS2000_T301
Unit: ms
Use this command to modify the MS10000_T311,
Default Value:
eNodeB eRAN7.0 and later settings of UE timers and MS15000_T311,
MS200_T301
constants MS20000_T311,
Unit: ms
MS30000_T311
Use this command to modify the Value
DefaultRange:
Value: 1 to 16
eNodeB eRAN7.0 and later parameters related to the timers Default Value: 4
MS10000_T311
of RRC connection control Unit: s
Unit: ms
Use this command to modify the GUI Value Range: 0 to
eNodeB eRAN7.0 and later configuration of the PDCCH 255
resource allocation algorithm Unit: None
Use this command to modify the Value Range: 1 to 4
eNodeB eRAN7.0 and later configuration of the PDCCH Default Value: 1
resource allocation algorithm Unit: None
Value Range: OFF, ON,
Use this command to modify the ECFIADAPTIONON
eNodeB eRAN7.0 and later configuration of the PDCCH Default Value:
resource allocation algorithm ECFIADAPTIONON
Unit: None
Value Range: 1 to 200
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 20
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 35
eNodeB connection state timers
Unit: s
Value Range: 3 to 15
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 15
eNodeB connection state timers
Unit: s
Value Range: 1 to 200
Use this command to modify the
eNodeB eRAN7.0 and later Default Value: 20
eNodeB connection state timers
Unit: s
GUI Value Range: 0 to
Use this command to modify an
eNodeB eRAN7.0 and later 39
RLC/PDCP parameter group
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第473页，共633页

 D_T1,
MAXRETX_THRESHOL
Value
D_T2, Range:
MAXRETX_THRESHOL
MAXRETX_THRESHOL
686970386.xls D_T1,
D_T3, 文档密级
MAXRETX_THRESHOL
MAXRETX_THRESHOL
D_T2,
Value
D_T4, Range:
MAXRETX_THRESHOL
N3_PREMB_TRANS_M
MAXRETX_THRESHOL
Use this command to modify an AX,
D_T3,
eNodeB eRAN7.0 and later D_T6,
RLC/PDCP parameter group MAXRETX_THRESHOL
N4_PREMB_TRANS_M
MAXRETX_THRESHOL
D_T4,
AX,
D_T8,
MAXRETX_THRESHOL
Use this command to modify an N5_PREMB_TRANS_M
MAXRETX_THRESHOL
eNodeB eRAN7.0 and later D_T6,
AX,
D_T16,
RLC/PDCP parameter group
MAXRETX_THRESHOL
N6_PREMB_TRANS_M
MAXRETX_THRESHOL
D_T8,
AX,
D_T32
GUI Value Range: 0 to
Use this command to modify the MAXRETX_THRESHOL
N7_PREMB_TRANS_M
Default Value:
eNodeB eRAN7.0 and later 255
D_T16,
RACH configuration. AX,
MAXRETX_THRESHOL
Unit:
Value None
Range:
MAXRETX_THRESHOL
N8_PREMB_TRANS_M
D_T32
DB0_PWR_RAMPING_S
D_T32
AX, None
Use this command to modify the Unit:
TEP,
Default Value:
eNodeB eRAN7.0 and later N10_PREMB_TRANS_M
RACH configuration. DB2_PWR_RAMPING_S
MAXRETX_THRESHOL
AX,
TEP,
D_T32
N20_PREMB_TRANS_M
DB4_PWR_RAMPING_S
Unit: None
Use this command to modify the AX,
eNodeB eRAN7.0 and later TEP,
N50_PREMB_TRANS_M
RACH configuration.
DB6_PWR_RAMPING_S
AX,
TEP
N100_PREMB_TRANS_
Use this command to modify the GUI Value Range: 0 to
Default
eNodeB eRAN7.0 and later neighbor relationship with an MAX, Value:
255
DB2_PWR_RAMPING_S
intra-frequency E-UTRAN cell. N200_PREMB_TRANS_
Unit:
TEP None
MAX
Unit:
Use this command to modify the GUI dBValue:
Value
Default Range: 000 to
eNodeB eRAN7.0 and later neighbor relationship with an 999
N10_PREMB_TRANS_M
intra-frequency E-UTRAN cell. Unit:
AX None
Use this command to modify the Unit: None Range: 00 to
GUI Value
eNodeB eRAN7.0 and later neighbor relationship with an 99, 000 to 999
intra-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUI Value Range: 0 to
eNodeB eRAN7.0 and later neighbor relationship with an 1048575
intra-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUIValueValue Range:
Range: 0 todB-
dB-24,
eNodeB eRAN7.0 and later neighbor relationship with an 255dB-20, dB-18, dB-16,
22,
intra-frequency E-UTRAN cell. dB-14,
Unit: None
dB-12, dB-10, dB-
8, dB-6, dB-5, dB-4, dB-
Use this command to modify the Value Range: dB-24, dB-
3, dB-2, dB-1, dB0, dB1,
eNodeB eRAN7.0 and later neighbor relationship with an 22,
dB2,dB-20, dB-18,
dB3, dB4, dB-16,
dB5,
intra-frequency E-UTRAN cell. dB-14, dB-12, dB-10, dB-
Use this command to modify the dB6, dB8, dB10, dB12,
8, dB-6,
dB14, dB-5,dB18,
dB16, dB-4,dB20,
dB-
neighbor relationship with an
3, dB-2, dB-1, dB0, dB1,
eNodeB eRAN7.0 and later intra-frequency E-UTRAN cell. dB22, dB24
dB2, dB3, dB4, dB5,
Unit: dB
dB6, dB8, dB10, dB12,
Use this command to modify a GUI dB14, dB16,
Value dB18,0dB20,
Range: to
dB22, dB24
eNodeB eRAN7.0 and later parameter group related to intra- 255
frequency handover dB
Unit: None
Use this command to modify a
GUI Value Range: 0 to 9
eNodeB eRAN7.0 and later parameter group related to intra-
Unit: None
frequency handover
Use this command to modify a
Default Value: 5
eNodeB eRAN7.0 and later parameter group related to intra-
Unit: 0.5dB
frequency handover
Use this command to modify a
Default Value: {-8; 8}
eNodeB eRAN7.0 and later parameter group related to intra-
unit: 0.5dB
frequency handover
GUI Value Range: 0 to 5,
Use this command to query the
eNodeB eRAN7.0 and later 65535
license sale information
Unit: None

08/24/2023 华为保密信息,未经授权禁止扩散 第474页，共633页

 686970386.xls 文档密级

GUI Value Range:

Use this command to query the
eNodeB eRAN7.0 and later eNodeB
license sale information
Unit: None
Use this command to query the GUI Value Range: 0 to
Use this command
manufacturing to list the
information about
eNodeB eRAN7.0 and later 255
dynamic information
a board. Only one boardabout a cell
can be Unit: None
queried at a time. Because
Use
therethis command
is only to query the
one backplane in GUI Value Range: 0 to
eNodeB eRAN7.0 and later manufacturing information
the BBU subrack, the about 62
a board. Only one
manufacturing board can
information be
about Unit: None
queried at
the subrack a time. Because
can be to obtained by
Use this command query the GUI Value Range: 0 to 1,
there
the is only
query onemanufacturing
of the backplane in
manufacturing information about 4 to 5, 7 to 8, 11 to 12,
eNodeB eRAN7.0 and later the BBU subrack,
information about the
the
a board. Only one board can be 14 to 15, 40 to 254
manufacturing
backplane. information about
queried at a time. Because Unit: None
the subrack can be obtained by
there is only
the query onemanufacturing
of the backplane in GUI Value Range: 0 to 8,
eNodeB eRAN7.0 and later the BBU subrack,
information about the the 16, 18 to 19, 255
manufacturing information about For
Unit:FDD
None
backplane. Default Value:
the subrack can be obtained by
Use this command
the query to modify the
of the manufacturing GUI Value Range: 0 to
DlVarIBLERtargetSwitch-
eNodeB eRAN7.0 and later settings
information about thealgorithm
of cell-level 255
1, CqiAdjAlgoSwitch-1,
switches
backplane. Unit: None
AdaptiveStepVarySwitch-
1
Use this command to modify the
Unit: None
eNodeB eRAN7.0 and later settings of cell-level algorithm
For TDD
switches.
Default Value:
Default Value:
Use this command to modify the CqiAdjAlgoSwitch-1,
IrcSwitch=PucchIrcSwitc
StepVarySwitch-1,
eNodeB eRAN7.0 and later settings of cell-level algorithm
h-1
AdaptiveStepVarySwitch-
switches.
Unit:
1 None
GUI Value Range: 0 to
Use this command to modify the Unit: None
eNodeB eRAN7.0 and later 255
PDSCH configuration.
Unit: None
Use this command to query the Value Range: -600 to
Use this command
dynamic attributes of to the
modify
TX the 500
eNodeB eRAN7.0 and later
PDSCH
channel configuration.
of the RRU or RFU. Unit: 0.1 dBm
The dynamic attributes include
Use this command
information such as the to query the GUI Value Range: 0 to
eNodeB eRAN7.0 and later dynamic
hardwareattributes
maximumofoutput the TX 62
channel
power and of the RRU oroutput
maximum RFU. Unit: None
The
power dynamic attributes
of command
the TX Channel, include
Use this
information such as to query
the of TX the GUI Value Range: 4 to 5,
maximum
dynamic output
attributes power
ofoutput
the TX
eNodeB eRAN7.0 and later hardware
unit, maximum
frequency band,orand 60 to 254
channel
power andof the RRU
maximum RFU.
output Unit: None
bandwidth.
The dynamic attributes include
power
Use of command
this the TX Channel,
to query the
information
maximum such as
output powerthe of TX
dynamic attributes ofoutput
the TX GUI Value Range: 0 to 8
eNodeB eRAN7.0 and later hardware maximum
unit, frequency band,orand
channel of the RRU RFU. Unit: None
power and maximum output
bandwidth.
The dynamic attributes
power of the TX Channel, include
information
maximum output such aspowerthe of TX
GUI Value Range: 0 to 8
eNodeB eRAN7.0 and later hardware
unit, frequency band,output
maximum and Unit: None
power and maximum output
bandwidth.
power of the TX Channel,
Use this command
maximum output power to modify
of TXa GUI Value Range: 0 to
eNodeB eRAN7.0 and later remote electrical tilting
unit, frequency band, and (RET) 125
subunit.
bandwidth. Unit: None
Use this command to modify a
GUI Value Range: 1 to 8
eNodeB eRAN7.0 and later remote electrical tilting (RET)
Unit: None
subunit.
Use this command to modify a Value Range: -100 to
eNodeB eRAN7.0 and later remote electrical tilting (RET) 300
subunit. Unit: 0.1 degree

08/24/2023 华为保密信息,未经授权禁止扩散 第475页，共633页

 686970386.xls 文档密级

Use this command to modify the GUI Value Range: 0 to

eNodeB eRAN7.0 and later configuration of a neighboring 255
E-UTRAN frequency. Unit: None
Use this command to modify the
eNodeB eRAN7.0 and later configuration of a neighboring NA
E-UTRAN frequency.
Use this command to modify the
Value Range: 0 to 31
eNodeB eRAN7.0 and later configuration of a neighboring
Unit: 2dB
E-UTRAN frequency.
Use this command to modify the
Value Range: 0 to 31
eNodeB eRAN7.0 and later configuration of a neighboring
Unit: 2dB
E-UTRAN frequency.
Use this command to modify the GUI Value Range: 0 to
eNodeB eRAN7.0 and later parameters about cell 255
reselection. Unit: None
Use this command to modify the
eNodeB eRAN7.0 and later parameters about cell NA
reselection.
Use this command to modify the
Value Range: 0 to 31
eNodeB eRAN7.0 and later parameters about cell
Unit: 2dB
reselection.
Use this command to modify the
Value Range: 0 to 31
eNodeB eRAN7.0 and later parameters about cell
Unit: 2dB
reselection.
Use this command to modify the GUI Value Range: 0 to
eNodeB eRAN7.0 and later neighboring relation with an 255
inter-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUI Value Range: 3
eNodeB eRAN7.0 and later neighboring relation with an characters
inter-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUI Value Range: 2 to 3
eNodeB eRAN7.0 and later neighboring relation with an characters
inter-frequency E-UTRAN cell. Unit: None
Use this command to modify the GUI Value Range: 0 to
eNodeB eRAN7.0 and later neighboring relation with an 1048575
inter-frequency E-UTRAN cell. Unit: None
Value Range: dB-24, dB-
Use this command to modify the 22,
GUIdB-20,
Value Range: 0 to
dB-18, dB-16,
eNodeB eRAN7.0 and later neighboring relation with an 255
dB-14, dB-12, dB-10, dB-
inter-frequency E-UTRAN cell. 8,
Unit: None
dB-6, dB-5, dB-4, dB-
3, dB-2, dB-1, dB0, dB1,
Use this command to modify the
dB2, dB3, dB4, dB5,
eNodeB eRAN7.0 and later neighboring relation with an
dB6, dB8, dB10, dB12,
inter-frequency E-UTRAN cell.
dB14, dB16, dB18, dB20,
dB22, dB24
Unit: dB

08/24/2023 华为保密信息,未经授权禁止扩散 第476页，共633页

 686970386.xls 文档密级

Parameter
Fixed-value Valueinclude
parameters: Type the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthedoes
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
Fixed-value parameters: include
by users. The MAE delivers the fixed the
parameters for which
values of these the MAE
parameters provides
based on
built-in default values that are displayed
the objects that are filtered according to
on the MAE
algorithm client and can be modified
requirements.
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client and
algorithm requirements. can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters: includeon
parameters based
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第477页，共633页

 686970386.xls 文档密级
Fixed-value parameters: include the
parameters for which the MAE provides
built-in default values that are displayed
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client
algorithm requirements. and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
Fixed-value parameters:The
foreign key parameters. include
MAEthe does
parameters
not optimize the values of theseprovides
for which the MAE
built-in default values that are displayed
parameters.
on the MAE client and can be modified
Fixed-value
by users. The parameters:
MAE deliversinclude the
the fixed
parameters for which the MAE
values of these parameters based on provides
built-in default
the objects thatvalues that are
are filtered displayed
according to
on the MAE client
algorithm requirements. and can be modified
by users. The MAE delivers the fixed
Identity-related
values of these parameters:
parameters basedincludeon
parameters such as CellId, IDTYPE,
the objects that are filtered according to
MCC, andrequirements.
algorithm the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of each include the
parameter
parameters for which
on the MAE client or on NEs.the MAE
calculates optimization values
according to algorithm requirements
Identity-related
and the value range parameters:
of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters:
values of theseinclude
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
Fixed-value
the fixed valuesparameters:
of these includes
parameters the
parameters for which the MAE
based on the objects that are filtered provides
built-in
accordingdefault values that
to algorithm cannot be
requirements.
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and tothealgorithm requirements.
MOC primary key and
foreign key parameters. The MAE does
not optimize the values of these
parameters.

08/24/2023 华为保密信息,未经授权禁止扩散 第478页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters.
Fixed-value parameters:The MAE the
includes does
not optimizefor
parameters thewhich
valuestheofMAE
theseprovides
parameters.
built-in default values that cannot be
modified by users. The MAE delivers
Fixed-value parameters:
the fixed values of these includes
parameters the
parameters for which the MAE
based on the objects that are filtered provides
built-in
accordingdefault values that
to algorithm cannot be
requirements.
modified by users. The MAE delivers
the fixed valuesparameters:
Identity-related of these parameters
include
based on thesuch
parameters objects that are
as CellId, filtered
IDTYPE,
according
MCC, and to thealgorithm
MOC primaryrequirements.
key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
Identity-related
and the value range parameters:
of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value
not optimize the parameters:
values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第479页，共633页

 686970386.xls 文档密级
Identity-related parameters: include
parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these
parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. Theparameters:
Range-value MAE obtainsinclude
the values
the
of these parameters
parameters for whichfrom NEs.
the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs.MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
not optimize the values
Non-MAE-optimized of these
parameters:
parameters.
include the non-identity-related
parameters that the MAE does not
optimize. Theparameters:
Range-value MAE obtainsinclude
the values
the
of these parameters
parameters for whichfrom NEs.
the MAE
calculates optimization values
according to algorithm requirements
Range-value
and the valueparameters:
range of eachinclude the
parameter
parameters for which the
on the MAE client or on NEs.MAE
calculates optimization values
according to algorithm requirements
Identity-related parameters:
and the value range of each include
parameter
parameters such as CellId,
on the MAE client or on NEs. IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Identity-related
not optimize theparameters: include
values of these
parameters
parameters. such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE does
Range-value parameters:
not optimize the values of include
these the
parameters
parameters. for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

08/24/2023 华为保密信息,未经授权禁止扩散 第480页，共633页

 Optimization Type MML Command Parameter Parameter Description

UMTS Optimization for MOD

CellId Unique ID of a cell.
heavy traffic UINTERFREQNCELL

UMTS Optimization for MOD

RncId ID of an RNC.
heavy traffic UINTERFREQNCELL

UMTS Optimization for ADD

NodeBName Name of the NodeB.
heavy traffic UNODEBALGOPARA

UMTS Optimization for

MOD TRMFACTOR FTI Activation factor table index.
heavy traffic

Traffic class which includes

Best Effort(BE) and PTT. BE
UMTS Optimization for services comprise interactive
SET UUSERGBR TrafficClass
heavy traffic services, background
services, and IMS.

Threshold for admission

UMTS Optimization for based on the total downlink
MOD UCELLCAC DlCellTotalThd
heavy traffic power resources in HSDPA
cells.

UMTS Optimization for Threshold for admitting an

MOD UCELLCAC DlConvAMRThd
heavy traffic AMR voice service.
UMTS Optimization for Threshold for admitting a
MOD UCELLCAC DlHOThd
heavy traffic handover service.

Whether to activate the cell-

level dynamic CAPS flow
UMTS Optimization for ADD
CELLKPITOCAPS control algorithm based on the
heavy traffic UCELLFCALGOPARA
ratio of RRC connection setup
failures.

Threshold for triggering the

cell-level dynamic CAPS flow
UMTS Optimization for ADD
RejectKPICTHD control algorithm based on the
heavy traffic UCELLFCALGOPARA
ratio of RRC connection setup
failures.

Threshold for stopping the

cell-level dynamic CAPS flow
UMTS Optimization for ADD
RejectKPIRTHD control algorithm based on the
heavy traffic UCELLFCALGOPARA
ratio of RRC connection setup
failures.

Specifies the number of codes

used by the E-DCH Relative
UMTS Optimization for ErgchEhichCodeN
ADD UCELLHSUPA Grant Channel (E-RGCH)/E-
heavy traffic um
DCH Hybrid ARQ Indicator
Channel (E-HICH).

UMTS Optimization for ADD NODEBHSDPAM Maximum number of HSDPA

heavy traffic UNODEBALGOPARA AXUSERNUM users allowed by the NodeB.
UMTS Optimization for ADD NODEBHSUPAM Maximum number of HSUPA
heavy traffic UNODEBALGOPARA AXUSERNUM users allowed by the NodeB.

Whether to enable the power

UMTS Optimization for LdbDRDSwitchHS
MOD UCELLDRD balancing DRD algorithm for
heavy traffic DPA
HSDPA services.

Whether load balancing DRD

or multi-carrier HSPA+
UMTS Optimization for technical satisfaction-based
MOD UCELLDRD LdbDRDchoice
heavy traffic DRD considering load
difference is based on power
or on user number.

UMTS Optimization for ADD/MOD

FuncSwitch2 Function Switch2.
heavy traffic UCELLLICENSE

UMTS HSDPA background

UMTS Optimization for
MOD TRMFACTOR HDBKGDL service downlink activity
heavy traffic
factor.

UMTS HSDPA interactive

UMTS Optimization for
MOD TRMFACTOR HDINTERDL service downlink activity
heavy traffic
factor.

UMTS Optimization for UMTS HSUPA background

MOD TRMFACTOR HUBKGUL
heavy traffic service uplink activity factor.
UMTS Optimization for HSUPA interactive service
MOD TRMFACTOR HUINTERUL
heavy traffic uplink activity factor.

UMTS R99 PS background

UMTS Optimization for
MOD TRMFACTOR PSBKGDL service downlink activity
heavy traffic
factor.

UMTS Optimization for UMTS R99 PS background

MOD TRMFACTOR PSBKGUL
heavy traffic service uplink activity factor.

UMTS R99 PS interactive

UMTS Optimization for
MOD TRMFACTOR PSINTERDL service downlink activity
heavy traffic
factor.

UMTS Optimization for UMTS R99 PS interactive

MOD TRMFACTOR PSINTERUL
heavy traffic service uplink activity factor.

UMTS Optimization for MOD

AdapAlgoSwitch Adaptive Algorithm Switch.
heavy traffic UCELLALGOSWITCH

UMTS Optimization for MOD RRCCeCodeCacC RRC connection admission

heavy traffic UCELLALGOSWITCH hoice control (CAC) mode.
UMTS Optimization for MOD RRC connection admission
RRCCacChoice
heavy traffic UCELLALGOSWITCH control (CAC) mode.

Whether to enable the

UMTS Optimization for MOD NBMCacAlgoSwitc
algorithms related to cell
heavy traffic UCELLALGOSWITCH h
service admission.

Cell Downlink Code

UMTS Optimization for MOD DlSfAdmAlgoSwitc
Admission Optimization
heavy traffic UCELLALGOSWITCH h
Switch

Whether resource allocation is

UMTS Optimization for MOD CSRABCacOptSw
optimized during CS RAB
heavy traffic UCELLALGOSWITCH itch
setups.

Whether to enable the

UMTS Optimization for MOD NBMLdcAlgoSwitc
algorithms related to cell load
heavy traffic UCELLALGOSWITCH h
control.

The downlink credit and code

UMTS Optimization for DlRRCCeCodeRe resource admission threshold
MOD UCELLCAC
heavy traffic svSf during the RRC connection
setup procedure.
 Maximum number of users
UMTS Optimization for MaxHsdpaUserNu
ADD UCELLCAC supported by the HSDPA
heavy traffic m
channel.

Maximum number of users

UMTS Optimization for MaxHsupaUserNu
ADD UCELLCAC supported by the HSUPA
heavy traffic m
channel in a cell.

Power threshold offset for

UMTS Optimization for NRTRRCCacThd
MOD UCELLCAC RRC CAC on non-real-time
heavy traffic Offset
services.

Power threshold offset for

RRC call admission control
UMTS Optimization for OtherRRCCacThd
MOD UCELLCAC (CAC) on services other than
heavy traffic Offset
real-time and non-real-time
services.

UMTS Optimization for UlTotalEqUserNu UL total equivalent user

MOD UCELLCAC
heavy traffic m number

The uplink credit admission

UMTS Optimization for
MOD UCELLCAC UlRRCCeResvSf threshold during the RRC
heavy traffic
connection setup procedure.

UMTS Optimization for HS-PDSCH code allocation

MOD UCELLHSDPA AllocCodeMode
heavy traffic mode: Manual or Automatic.
 The parameter specifies the
UMTS Optimization for HsPdschMinCode
MOD UCELLHSDPA minimum number of the HS-
heavy traffic Num
PDSCH codes.

Timer started after a UE

sends an RRC Connection
MOD
UMTS Optimization for Request message to the BSC
UCELLIDLEMODETIM T300
heavy traffic and stopped after the UE
ER
receives an RRC Connection
Setup message from the BSC.

MOD Maximum number of RRC

UMTS Optimization for
UCELLIDLEMODETIM N300 Connection Request message
heavy traffic
ER retransmissions.

The threshold of the reserved

UMTS Optimization for UlTtiCreditSfResT SF is used for judging the
MOD UCELLLDR
heavy traffic hd uplink credit state for TTI
switchover decision.

Whether retransmitted PS
UMTS Optimization for CcchCongCtrlSwit RRC connection requests or
MOD UCELLLDR
heavy traffic ch PS cell update requests are
discarded.

MOD
UMTS Optimization for PreemptAlgoSwitc Whether preemption is
UCELLQUEUEPREEM
heavy traffic h supported.
PT
 MOD
UMTS Optimization for PreemptEnhSwitc
UCELLQUEUEPREEM Preemption Enhance Switch.
heavy traffic h
PT

Whether a UE can preempt

MOD
UMTS Optimization for CsP2DPreemptSw resources occupied by PS BE
UCELLQUEUEPREEM
heavy traffic itch services after the cell resource
PT
admission fails.

Waiting time carried in low-

UMTS Optimization for MOD LowRrcConnRejW
priority RRC Connection
heavy traffic UCELLSTATETIMER aitTmr
Reject messages.

This parameter specifies the

UMTS Optimization for
MOD UTYPRABOLPC TrchType type of transport channel for
heavy traffic
the typical RAB.

UMTS Optimization for Level of delay between the

MOD UTYPRABOLPC DelayClass
heavy traffic UE and BSC.
 Number of target
retransmissions when the
UMTS Optimization for EdchTargetLittleR
MOD UTYPRABOLPC MAC-ES data flows carrying
heavy traffic etransNum
the service allow small
retransmissions.

Actual value of the target

UMTS Optimization for
MOD UTYPRABOLPC BLERQUALITY BLER of DCH based on the
heavy traffic
GUI value of this parameter.

Call shock control switch at

UMTS Optimization for SET CallShockCtrlSwit
SPU subsystem level, NodeB
heavy traffic UCALLSHOCKCTRL ch
level, or cell level.

T381 is started after the RNC

send message "RRC
CONNECTION SETUP"(or
"CELL UPDATE CONFIRM").
If T381 expire and RNC does
not receive "RRC
CONNECTION SETUP
COMPLETE"(or the response
of "CELL UPDATE
CONFIRM") and V381 is
UMTS Optimization for SET
T381 smaller than N381, RNC
heavy traffic UCONNMODETIMER
resend "RRC CONNECTION
SETUP"(or "CELL UPDATE
CONFIRM") and restart timer
T381 and increase V381. If
RNC receive "RRC
CONNECTION SETUP
COMPLETE"(or the response
of "CELL UPDATE
CONFIRM"), T381 will be
stopped.

SET
UMTS Optimization for Dynamic resource allocation
UCORRMALGOSWITC DraSwitch
heavy traffic switch group.
H
 SET
UMTS Optimization for
UCORRMALGOSWITC DrSwitch Direct retry switch group.
heavy traffic
H

UMTS Optimization for PerfEnhanceSwitc Performance Enhancement

SET UCORRMPARA
heavy traffic h1 Switch 1

UMTS Optimization for SET WranFlowCtrlNod Whether E2E flow control is

heavy traffic UCTRLPLNFCPARA eBSw enabled in the RAN system.

UMTS Optimization for SET Whether to start flow control

RanCtrlFcSwitch
heavy traffic UCTRLPLNFCPARA on the control plane.

SET
UMTS Optimization for CtrlPlnSharingOut Forwarding threshold of
UCTRLPLNSHAREPA
heavy traffic Thd control plane load sharing.
RA

SET
UMTS Optimization for CtrlPlnSharingOut The sharing offset should be
UCTRLPLNSHAREPA
heavy traffic Offset added to the target subrack.
RA
 Period of downlink TCP
measurement result that the
UMTS Optimization for
SET UDPB RptPeriod NodeB reports to the RNC in
heavy traffic
the optimized downlink power
balancing algorithm.

Whether to preferentially send

UMTS Optimization for
SET UDPUCFGDATA PagingSwitch paging messages for CS
heavy traffic
services.

UMTS Optimization for

SET UDPUCFGDATA ProcessSwitch Process Control Switch.
heavy traffic

UMTS Optimization for DrdRollBackSwitc DRD rollback enhancement

SET UDPUCFGDATA
heavy traffic h switch.

This parameter specifies the

UMTS Optimization for BeHsupa2msTtiRa rate threshold of 2ms TTI on
SET UFRC
heavy traffic teThs the E-DCH for HSUPA BE
service.

This parameter specifies

UMTS Optimization for
SET UFRC RetryCapability which HSPA technologies can
heavy traffic
be retried by UEs.
 Duration of a CQI feedback
UMTS Optimization for
SET UHSDPCCH CQIFbCk cycle when the UE is in the
heavy traffic
single-RLS state.

Duration of a CQI feedback

UMTS Optimization for
SET UHSDPCCH CQIFbCkforSHO cycle when the UE is in the
heavy traffic
multi-RLS state.

Indicates the power

SET congestion admission switch.
UMTS Optimization for
ULOCELLR99ALGPAR PWRCNGCACSW It controls whether the power
heavy traffic
A congestion-based E2E flow
control algorithm takes effect.

Reliability Switch,This
UMTS Optimization for
SET UNBMPARA ReliabilitySwitch parameter is an advanced
heavy traffic
parameter.

Whether to activate the PS

UMTS Optimization for SET PsBERrcPreempt
BE RRC preemption algorithm
heavy traffic UQUEUEPREEMPT Vulnerable
for a cell.

UMTS Optimization for SET PreemptEnhSwitc Preemption Enhancement

heavy traffic UQUEUEPREEMPT h Switch
UMTS Optimization for SET
FunctionSwitch Function Switch
heavy traffic URRCTRLSWITCH

UMTS Optimization for SET OptimizationSwitc

Optimization Switch
heavy traffic URRCTRLSWITCH h

UMTS Optimization for SET PROCESSSWITC

Process Control Switch 2
heavy traffic URRCTRLSWITCH H2

UMTS Optimization for SET PROCESSSWITC

Process Control Switch 3
heavy traffic URRCTRLSWITCH H3

Timer for not releasing

UMTS Optimization for IuPSRelNoRABT signaling over the Iu-PS
SET USTATETIMER
heavy traffic mr interface when no PS RAB is
set up.

Whether the user plane

SET performs admission based on
UMTS Optimization for GbrAdmitAlgoSwit
UUSERPLNSHAREPA the admission algorithm based
heavy traffic ch
RA on the guaranteed bit rate
(GBR).
UMTS Optimization for Uplink GBR of the BE and
SET UUSERGBR ULGBR
heavy traffic PTT services.

UMTS Optimization for Downlink GBR of the BE and

SET UUSERGBR DLGBR
heavy traffic PTT services.

SET Received signal code power

UMTS Optimization for PrefCampRscpTh
UCAMPSTRATFORMA (RSCP) threshold for
heavy traffic d
SS preferred camping.

Received energy per chip

SET
UMTS Optimization for PrefCampEcNoTh divided by the power density
UCAMPSTRATFORMA
heavy traffic d in the band (Ec/No) threshold
SS
for preferred camping.

SET Threshold for the number of

UMTS Optimization for
UCAMPSTRATFORMA RrcConnSumThd RRC connection setup
heavy traffic
SS requests within 5 min in a cell.
 SET Threshold for the number of
UMTS Optimization for RrcRejByCongRati
UCAMPSTRATFORMA RRC connection setup
heavy traffic oThd
SS requests within 5 min in a cell.

Threshold for triggering inter-

frequency cell reselections for
SET
UMTS Optimization for UEs in idle mode when the
UCAMPSTRATFORMA IdleSintersearch
heavy traffic network camping strategy is
SS
changed from preferred
camping to random camping.

Threshold for inter- or intra-

frequency hierarchical cell
SET structure (HCS) cell
UMTS Optimization for
UCAMPSTRATFORMA SsearchHCS reselection when the network
heavy traffic
SS camping strategy is changed
from preferred camping to
random camping.

SET
UMTS Optimization for
UCAMPSTRATFORMA RetryOptSwitch Retry Optimize Switch
heavy traffic
SS

Indicates the Local Cell ID.

UMTS Optimization for
DSP ULOCELLRES ULOCELLID The local cell ID is unique for
heavy traffic
one NodeB.

UMTS Optimization for MOD Unique RNC ID of a

NCellRncId
heavy traffic UINTERFREQNCELL neighboring cell

UMTS Optimization for MOD Unique ID of a neighboring

NCellId
heavy traffic UINTERFREQNCELL cell
UMTS Optimization for Indicates the cabinet number
DSP BRD CN
heavy traffic of the board.

UMTS Optimization for Indicates the subrack number

DSP BRD SRN
heavy traffic of the board.

UMTS Optimization for Indicates the slot number of

DSP BRD SN
heavy traffic the board.

Indicates the number of the

UMTS Optimization for
DSP CPUUSAGE CN cabinet where the board is
heavy traffic
located.

UMTS Optimization for Indicates the subrack number

DSP CPUUSAGE SRN
heavy traffic of the board.

UMTS Optimization for Indicates the slot number of

DSP CPUUSAGE SN
heavy traffic the board.

UMTS Optimization for

MOD UCNDOMAIN CNDomainId Identifying the type of a CN.
heavy traffic
 Maximum TX power of the
PCPICH in a cell. This
UMTS Optimization for MaxPCPICHPowe
MOD UPCPICHPWR parameter defines the
heavy traffic r
maximum coverage area of a
cell.

Minimum TX power of the

PCPICH in a cell. This
UMTS Optimization for
MOD UPCPICHPWR MinPCPICHPower parameter defines the
heavy traffic
minimum coverage area of a
cell.

The minimum required quality

UMTS Optimization for MOD
Qrxlevmin threshold corresponding to
heavy traffic UCELLSELRESEL
CPICH RSCP.

Threshold for inter-RAT cell

UMTS Optimization for MOD
SsearchRat measurements in SIB3 and
heavy traffic UCELLSELRESEL
SIB4.

UMTS Optimization for MOD NBMUlCacAlgoSel Selection of uplink power

heavy traffic UCELLALGOSWITCH Switch admission control algorithms.
 With Intelligent Access Class
Control, the RNC adds the
number of restricted access
classes if cell resources are
UMTS Optimization for ADD/MOD
CongACSwitch congested. If cell resources
heavy traffic UCELLCONGACALGO
are no longer congested, the
RNC reduces the number of
restricted access classes.

Threshold for cell congestion

with the RRC or RAB setup
request rejection rate. When
RRC or RAB setup request
UMTS Optimization for ADD/MOD
CongRejTrigThd rejection rate in a cell is equal
heavy traffic UCELLCONGACALGO
to or higher than , the RNC
regards the cell in question as
being congested.

Threshold for cell resource

restoration with the RRC or
RAB setup request rejection
UMTS Optimization for ADD/MOD rate. When this threshold is
CongRejRelThd
heavy traffic UCELLCONGACALGO not exceeded, the RNC
regards the cell in question as
not being congested.

Range of restricted access

classes. Access requests
initiated by UEs of specific
UMTS Optimization for ADD/MOD
ACRstrctRange access classes specified by
heavy traffic UCELLCONGACALGO
this parameter are rejected by
the RNC at the interval
specified by ACPollPeriod.

MOD
UMTS Optimization for Whether the PS domain of a
UCELLACCESSSTRIC DomainType
heavy traffic cell is blocked.
T
UMTS Optimization for
MOD UCELL PCPICHPower PCPICH Transmit Power
heavy traffic

Minimum level threshold of

UTRAN cell reselection.
During the cell reselection
UMTS Optimization for SET
FDDRSCPMIN decision from a GSM cell to a
heavy traffic GCELLCCUTRANSYS
FDD cell, this parameter is
used to calculate the RSCP
threshold of the target cell.

This parameter specifies one

UMTS Optimization for SET
FDDQMIN of the parameters for FDD cell
heavy traffic GCELLCCUTRANSYS
reselection.
 NE Version Operation Description MAE Value Range and Unit

Use this command to

GUI Value Range: 0~65535
RNC RAN18.0 and later add an inter-frequency
Unit: None
neighboring cell.

Use this command to

GUI Value Range: 0~4095
RNC RAN18.0 and later add an inter-frequency
Unit: None
neighboring cell.

Use this command to GUI Value Range: 1 to

RNC RAN18.0 and later add NodeB-oriented 64characters
algorithm parameters. Unit: None

Use this command to GUI Value Range: 0~33

RNC RAN18.0 and later
modify a factor table. Unit: None

The guaranteed bit rate

(GBR) of services
cannot be guaranteed
in case of limited
GUI Value Range:
coverage or severely
INTERACTIVE,
limited resources such
RNC RAN18.0 and later BACKGROUND,
as Iub bandwidths,
IMSSIGNALLING, PTT
CEs, downlink codes,
Unit: None
downlink power, and
uplink power.

Use this command to

modify cell-oriented Call
Admission Control Value Range: 0~100
RNC RAN18.0 and later (CAC) algorithm Default Value: 90
parameters. Unit: %

Use this command to

modify cell-oriented Call
Admission Control Value Range: 0~100
RNC RAN18.0 and later (CAC) algorithm Default Value: 89
parameters. Unit: %
 Use this command to
modify cell-oriented Call
Admission Control Value Range: 0~100
RNC RAN18.0 and later (CAC) algorithm Default Value: 90
parameters. Unit: %

Use this command to

modify parameters of Value Range: OFF, ON
RNC RAN18.0 and later cell-level dynamic Default Value: ON
CAPS FC (flow control) Unit: None
algorithm.

Use this command to

modify parameters of Value Range: 0~100
RNC RAN18.0 and later cell-level dynamic Default Value: 20
CAPS FC (flow control) Unit: %
algorithm.

Use this command to

modify parameters of Value Range: 0~100
RNC RAN18.0 and later cell-level dynamic Default Value: 10
CAPS FC (flow control) Unit: %
algorithm.

Use this command to

modify the high speed Value Range: 1~12
RNC RAN18.0 and later uplink packet access Default Value: 1
(HSUPA) parameters of Unit: None
a cell.

Use this command to Value Range: 0~9216

RNC RAN18.0 and later add NodeB-oriented Default Value: 3840
algorithm parameters. Unit: None
 Use this command to Value Range: 0~9216
RNC RAN18.0 and later add NodeB-oriented Default Value: 3840
algorithm parameters. Unit: None

Use this command to

modify the Cell-
Value Range: OFF, ON
Oriented Directed Retry
RNC RAN18.0 and later Default Value: ON
Decision (DRD)
Unit: None
algorithm parameters of
a cell.

Use this command to

modify the Cell- Value Range: Power,
Oriented Directed Retry UserNumber
RNC RAN18.0 and later
Decision (DRD) Default Value: UserNumber
algorithm parameters of Unit: None
a cell.

Value Range:
CAMPING_STRATEGY_SW
Use this command to ITCH
RNC RAN18.0 and later modify function control Default Value:
items in a cell. CAMPING_STRATEGY_SW
ITCH-1
Unit: None

Value Range:0~100
Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %
 Value Range: 0~100
Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range: 0~100

Use this command to
RNC RAN18.0 and later Default Value: 10
modify a factor table.
Unit: %

Value Range:
ADAP_CELL_CONGEST_S
Use this command to WITCH
RNC RAN18.0 and later modify algorithm Default Value:
switches of a cell. ADAP_CELL_CONGEST_S
WITCH-1
Unit: None

Value Range: LOOSE_CAC,

Use this command to
STRICT_CAC
RNC RAN18.0 and later modify algorithm
Default Value: STRICT_CAC
switches of a cell.
Unit: None
 Value Range: LOOSE_CAC,
Use this command to
STRICT_CAC
RNC RAN18.0 and later modify algorithm
Default Value: STRICT_CAC
switches of a cell.
Unit: None

Value Range:
RTWP_RESIST_DISTURB
Use this command to
Default Value:
RNC RAN18.0 and later modify algorithm
RTWP_RESIST_DISTURB-
switches of a cell.
1
Unit: None

Value Range:
CS_SETUP_OPT_SWITCH
Use this command to
Default Value:
RNC RAN18.0 and later modify algorithm
CS_SETUP_OPT_SWITCH-
switches of a cell.
1
Unit: None

Use this command to Value Range: OFF, ON

RNC RAN18.0 and later modify algorithm Default Value: ON
switches of a cell. Unit: None

Value Range:
CAMPING_STRATEGY_SW
Use this command to ITCH, UL_UU_OLC
RNC RAN18.0 and later modify algorithm Default Value:
switches of a cell. CAMPING_STRATEGY_SW
ITCH-1, UL_UU_OLC-0
Unit: None

Use this command to

modify cell-oriented Call Value Range: SF4, SF8,
Admission Control SF16, SF32, SF64, SF128,
RNC RAN18.0 and later (CAC) algorithm SF256, SFOFF
parameters. Default Value: SF128
Unit: None
 Use this command to
modify cell-oriented Call
Admission Control Value Range: 0~192
RNC RAN18.0 and later (CAC) algorithm Default Value: 64
parameters. Unit: None

Use this command to

modify cell-oriented Call
Admission Control Value Range: 0~192
RNC RAN18.0 and later (CAC) algorithm Default Value: 20
parameters. Unit: None

Use this command to

modify cell-oriented Call
Admission Control Value Range: -100~100
RNC RAN18.0 and later (CAC) algorithm Default Value: 10
parameters. Unit: %

Use this command to

modify cell-oriented Call
Admission Control Value Range: -100~100
RNC RAN18.0 and later (CAC) algorithm Default Value: -10
parameters. Unit: %

Use this command to

modify cell-oriented Call
Admission Control Value Range: 1~255
RNC RAN18.0 and later (CAC) algorithm Default Value: 200
parameters. Unit: None

Use this command to

modify cell-oriented Call Value Range: SF4, SF8,
Admission Control SF16, SF32, SF64, SF128,
RNC RAN18.0 and later (CAC) algorithm SF256, SFOFF
parameters. Default Value: SF64
Unit: None

Use this command to

Value Range: Manual,
modify high speed
Automatic
RNC RAN18.0 and later downlink packet access
Default Value: Automatic
(HSDPA) parameters of
Unit: None
a cell.
 Use this command to
modify high speed Value Range: 1~15
RNC RAN18.0 and later downlink packet access Default Value: 1
(HSDPA) parameters of Unit: None
a cell.

Value Range: D100, D200,

D400, D600, D800, D1000,
The command is used
D1200, D1400, D1600,
to modify Cell-Level
RNC RAN18.0 and later D1800, D2000, D3000,
Timer and Constant for
D4000, D6000, D8000
UE in Idle Mode.
Default Value: D2000
Unit: None

The command is used

Value Range: 0~7
to modify Cell-Level
RNC RAN18.0 and later Default Value: 1
Timer and Constant for
Unit: None
UE in Idle Mode.

Value Range: 8SF4, 7SF4,

Use this command to 6SF4, 5SF4, 4SF4, 3SF4,
modify cell load 2SF4, SF4, SF8, SF16,
RNC RAN18.0 and later
reshuffling (LDR) SF32, SF64, SF128, SF256
algorithm parameters. Default Value: 8SF4
Unit: None

Use this command to

Value Range: OFF, ON
modify cell load
RNC RAN18.0 and later Default Value: ON
reshuffling (LDR)
Unit: None
algorithm parameters.

Modify Cell-Orientated
Value Range: OFF, ON
Queuing and
RNC RAN18.0 and later Default Value: ON
Preemption Algorithm
Unit: None
Parameters.
 Value Range:
PREEMPT_ENH_CSRRC_P
REEMPT_PS_SWITCH,
PREEMPT_ENH_CSRAB_P
REEMPT_PS_SWITCH,
PREEMPT_ENH_CPU_HIG
Modify Cell-Orientated
HLOAD_CTRL_SWITCH
Queuing and
RNC RAN18.0 and later Default Value:
Preemption Algorithm
PREEMPT_ENH_CSRRC_P
Parameters.
REEMPT_PS_SWITCH-1,
PREEMPT_ENH_CSRAB_P
REEMPT_PS_SWITCH-1,
PREEMPT_ENH_CPU_HIG
HLOAD_CTRL_SWITCH-0
Unit: None

Modify Cell-Orientated
Value Range: OFF, ON
Queuing and
RNC RAN18.0 and later Default Value: ON
Preemption Algorithm
Unit: None
Parameters.

Use this command to

Value Range: 0~15
modify cell-level call
RNC RAN18.0 and later Default Value: 15
flow state protection
Unit: s
timers.

Value Range: TRCH_DCH,

Use this command to
TRCH_EDCH_2MS,
modify typical RAB
TRCH_EDCH_10MS
RNC RAN18.0 and later Outer-Loop Power
Default Value:
Control (OLPC)
TRCH_EDCH_10MS
parameters.
Unit: None

Use this command to

modify typical RAB Value Range: 1~5
RNC RAN18.0 and later Outer-Loop Power Default Value: 1
Control (OLPC) Unit: None
parameters.
 Use this command to
modify typical RAB
Value Range: 0~15000
RNC RAN18.0 and later Outer-Loop Power
Unit: None
Control (OLPC)
parameters.

Use this command to

modify typical RAB Value Range: -63~0
RNC RAN18.0 and later Outer-Loop Power Default Value: -10
Control (OLPC) Unit: None
parameters.

Value Range:
Use this command to
SYS_LEVEL_DYNAMIC
set Call Attempts Per
RNC RAN18.0 and later Default Value:
Second(CAPS) Control
SYS_LEVEL_DYNAMIC-1
Parameters.
Unit: None

Value Range: D0, D100,

D200, D300, D400, D500,
Use this command to
D600, D700, D800, D900,
set UE timers and
RNC RAN18.0 and later D1000, D1200, D1500,
constants in connected
D2000
mode.
Default Value: D0
Unit: ms

Value Range:
Use this command to
DRA_BASE_ADM_CE_BE_
set the connection-
TTI_RECFG_SWITCH
oriented algorithm
RNC RAN18.0 and later Default Value:
switches of a RNC.
DRA_BASE_ADM_CE_BE_
TTI_RECFG_SWITCH-1
Unit: None
 Value Range:
Use this command to
DR_RAB_SING_DRD_SWIT
set the connection-
CH
oriented algorithm
RNC RAN18.0 and later Default Value:
switches of a RNC.
DR_RAB_SING_DRD_SWIT
CH-1
Unit: None

Value Range:
PERFENH_FACH_CONG_D
2IDLE_SWITCH,
Use this command to
PERFENH_CS_TRIG_PS_P
set the connection-
2D_ZERO_SWITCH
oriented algorithm
RNC RAN18.0 and later Default Value:
parameters of an RNC.
PERFENH_FACH_CONG_D
2IDLE_SWITCH-1,
PERFENH_CS_TRIG_PS_P
2D_ZERO_SWITCH-1
Unit: None

Use this command to

set the RNC-level
Value Range: ON, OFF
control plane flow
RNC RAN18.0 and later Default Value: ON
control parameters.
Unit: None

Use this command to

Value Range:
set the RNC-level
RAN_CTRLPLN_FC
control plane flow
RNC RAN18.0 and later Default Value:
control parameters.
RAN_CTRLPLN_FC-1
Unit: None

Use this command to

Value Range: 0~100
set RNC-oriented
RNC RAN18.0 and later Default Value: 50
control plane RRC
Unit: %
sharing parameters.

Use this command to

Value Range: 1~10
set RNC-oriented
RNC RAN18.0 and later Default Value: 5
control plane RRC
Unit: %
sharing parameters.
 Use this command to
Value Range: 10~60000
set RNC Downlink
RNC RAN18.0 and later Default Value: 200
Power Balance (DPB)
Unit: 10ms
algorithm parameters.

Set DPU(Data Process Value Range: OFF, ON

RNC RAN18.0 and later Unit) configuration Default Value: ON
parameters. Unit: None

Value Range:
OVERLOAD_AMR_DISCAR
Set DPU(Data Process D_SWITCH
RNC RAN18.0 and later Unit) configuration Default Value:
parameters. OVERLOAD_AMR_DISCAR
D_SWITCH-0
Unit: None

Set DPU(Data Process Value Range: OFF, ON

RNC RAN18.0 and later Unit) configuration Default Value: ON
parameters. Unit: None

Use this command to Value Range: D8, D16, D32,

set the RNC-Oriented D64, D128, D144, D256,
Fundamental Resource D384, D608, D1280, D2048,
RNC RAN18.0 and later
Configuration (FRC) D2720
parameters. Default Value: D1280
Unit: Kbps

Use this command to

set the RNC-Oriented
Fundamental Resource Value Range: TTI_2MS
RNC RAN18.0 and later Configuration (FRC) Default Value: TTI_2MS-0
parameters. Unit: None
 Use this command to Value Range: D0, D2, D4,
set the RNC-Oriented D8, D10, D20, D40, D80,
RNC RAN18.0 and later HS-DPCCH power D160
control algorithm Default Value: D8
parameters. Unit: None

Use this command to

set the RNC-Oriented Value Range: OFF, ON
RNC RAN18.0 and later HS-DPCCH power Default Value: D8
control algorithm Unit: None
parameters.

The command is used

to set R99 Algorithm Value Range: OFF, ON
NodeB RAN18.0 and later Parameters. Default Value: ON
Unit: None

Use this command to

Value Range:
set the cell-oriented
RELIABILITY_RRC_RETRA
algorithm parameters of
NS_SWITCH
an RNC.
RNC RAN18.0 and later Default Value:
RELIABILITY_RRC_RETRA
NS_SWITCH-1
Unit: None

Use this command to

Value Range: OFF, ON
set RNC-oriented
RNC RAN18.0 and later Default Value: ON
queue preempt
Unit: None
algorithm parameters

Value Range:
PREEMPT_ENH_NODEB_P
Use this command to
REEMPT_CE_SWITCH
set RNC-oriented
RNC RAN18.0 and later Default Value:
queue preempt
PREEMPT_ENH_NODEB_P
algorithm parameters
REEMPT_CE_SWITCH-1
Unit: None
 Value Range:
RRC_CONN_STATE_TO_N
ODEB_SWITCH
Use this command to
RNC RAN18.0 and later Default Value:
set process switches.
RRC_CONN_STATE_TO_N
ODEB_SWITCH-1
Unit: None

Value Range:
P2D_SWITCH,
CS_SETUP_P2D_SWITCH,
P2P_GTPU_NOT_CFG_SW
ITCH
Use this command to Default Value:
RNC RAN18.0 and later
set process switches. P2D_SWITCH-1,
CS_SETUP_P2D_SWITCH-
1,
P2P_GTPU_NOT_CFG_SW
ITCH-1
Unit: None
Value Range:
RNC_RBSETUP_DRD_FAIL
_ROLLBACK_SWITCH,
RNC_RBRECFG_DRD_FAI
L_ROLLBACK_SWITCH
Use this command to
RNC RAN18.0 and later Default Value:
set process switches.
RNC_RBSETUP_DRD_FAIL
_ROLLBACK_SWITCH-1,
RNC_RBRECFG_DRD_FAI
L_ROLLBACK_SWITCH-1
Unit: None

Value Range:
FACH_DCCH_CONG_CTRL
_SWITCH
Use this command to
RNC RAN18.0 and later Default Value:
set process switches.
FACH_DCCH_CONG_CTRL
_SWITCH-1
Unit: None

Use this command to

Value Range: 1~65535
set the state protection
RNC RAN18.0 and later Default Value: 30
timers of calling
Unit: s
process.

Use this command to

Value Range: OFF, ON
set the load sharing
RNC RAN18.0 and later Default Value: ON
parameters for the user
Unit: None
plane.
 The guaranteed bit rate
(GBR) of services
cannot be guaranteed
in case of limited Value Range: D0, D8, D16,
coverage or severely D32, D64, D128, D144,
limited resources such D256, D384, D608, D1280,
RNC RAN18.0 and later
as Iub bandwidths, D2048, D2720, D5440
CEs, downlink codes, Default Value: D32
downlink power, and Unit: Kbps
uplink power.

The guaranteed bit rate

(GBR) of services
Value Range: D0, D8, D16,
cannot be guaranteed
D32, D64, D128, D144,
in case of limited
D256, D384, D512, D768,
coverage or severely
D1024, D1536, D1800,
limited resources such
RNC RAN18.0 and later D2048, D3600, D7200,
as Iub bandwidths,
D8640, D10100, D13900,
CEs, downlink codes,
D16000, D21000
downlink power, and
Default Value: D32
uplink power.
Unit: Kbps

Use this command to

set the parameter
Default Value: -10
RNC RAN18.0 and later related to camping
Unit: dB
policy switching in case
of heavy traffic.

Use this command to

set the parameter
Default Value: -10
RNC RAN18.0 and later related to camping
Unit: dB
policy switching in case
of heavy traffic.

Use this command to

set the parameter Value Range: 1~65535
RNC RAN18.0 and later related to camping Default Value: 200
policy switching in case Unit: None
of heavy traffic.
 Use this command to
set the parameter Value Range: 0~100
RNC RAN18.0 and later related to camping Default Value: 1
policy switching in case Unit: %
of heavy traffic.

Use this command to

set the parameter
Default Value: 6
RNC RAN18.0 and later related to camping
Unit:2dB
policy switching in case
of heavy traffic.

Use this command to

set the parameter
Default Value: 10
RNC RAN18.0 and later related to camping
Unit: 2dB
policy switching in case
of heavy traffic.

Use this command to

set the parameter
Default Value: ON
RNC RAN18.0 and later related to camping
Unit: None
policy switching in case
of heavy traffic.

The command is used

to query the resource
distribution of a
specified local cell or all
local cells. That is,
GUI Value Range:
uplink baseband
NodeB RAN18.0 and later 0~268435455
resources and downlink
Unit: None
baseband resources
are allocated to which
DSPs.

Use this command to

GUI Value Range: 0~4095
RNC RAN18.0 and later add an inter-frequency
Unit: None
neighboring cell.

Use this command to

GUI Value Range: 0~65535
RNC RAN18.0 and later add an inter-frequency
Unit: None
neighboring cell.
 Use this command to
GUI Value Range: 0~62
NodeB RAN18.0 and later query the status of a
Unit: None
board.

GUI Value Range:

Use this command to
0~1,4~5,7~8,11~12,14~15,4
NodeB RAN18.0 and later query the status of a
0~254
board.
Unit: None

Use this command to GUI Value Range:

NodeB RAN18.0 and later query the status of a 0~8,16,18~19
board. Unit: None

Use this command to

query the CPU/DSP
usage of a board. After
the execution of this GUI Value Range: 0~62
NodeB RAN18.0 and later
command, the usage of Unit: None
the master CPU, slave
CPU, and DSP (if any)
is displayed.

Use this command to

query the CPU/DSP
usage of a board. After
GUI Value Range:
the execution of this
NodeB RAN18.0 and later 0~1,4~5,60~254
command, the usage of
Unit: None
the master CPU, slave
CPU, and DSP (if any)
is displayed.

Use this command to

query the CPU/DSP
usage of a board. After
the execution of this GUI Value Range: 0~8
NodeB RAN18.0 and later
command, the usage of Unit: None
the master CPU, slave
CPU, and DSP (if any)
is displayed.
Use this command to
add the specific Non
Access Stratum (NAS)
information and
Discontinuous GUI Value Range:
RNC RAN18.0 and later Reception (DRX) cycle CS_DOMAIN, PS_DOMAIN
length coefficient of Unit: None
Core Network (CN)
domain.
 If the intra-frequency
load balancing
algorithm or downlink-
load-based dynamic
pilot power adjustment
algorithm is enabled for
a cell in a power
adjustment association
group, the MAE GUI Value Range: -100~500
RNC RAN18.0 and later
modifies the pilot power Unit: 0.1dBm
of the cell along with its
maximum and minimum
P-CPICH transmit
powers.
Use this command to
modify the power
information of a P-
CPICH.

If the intra-frequency
load balancing
algorithm or downlink-
load-based dynamic
pilot power adjustment
algorithm is enabled for
a cell in a power
adjustment association
group, the MAE GUI Value Range: -100~500
RNC RAN18.0 and later
modifies the pilot power Unit: 0.1dBm
of the cell along with its
maximum and minimum
P-CPICH transmit
powers.
Use this command to
modify the power
information of a P-
CPICH.

Modify cell selection

Value Range: -58~-13
RNC RAN18.0 and later and reselection
Unit: 2dBm
information.

Modify cell selection

Value Range: -16~10, 127
RNC RAN18.0 and later and reselection
Unit: 2dB
information.

Use this command to Default Value:

RNC RAN18.0 and later modify algorithm ALGORITHM_OFF
switches of a cell. Unit: None
 Use this command to
modify cell-oriented
information about Value Range: OFF, ON
RNC RAN18.0 and later Intelligent Access Class Default Value: ON
Control. Unit: None

Use this command to

modify cell-oriented
information about Value Range: 0~100
RNC RAN18.0 and later Intelligent Access Class Default Value: 30
Control. Unit: %

Use this command to

modify cell-oriented
information about Value Range: 0~100
RNC RAN18.0 and later Intelligent Access Class Default Value: 10
Control. Unit: %

Value Range: AC0, AC1,

AC2, AC3, AC4, AC5, AC6,
Use this command to
AC7, AC8, AC9, AC10,
modify cell-oriented
AC11, AC12, AC13, AC14,
information about
AC15
RNC RAN18.0 and later Intelligent Access Class
Default Value: AC0-1&AC1-
Control.
1&AC2-1&AC3-1&AC4-
1&AC5-1&AC6-1&AC7-
1&AC8-1&AC9-1
Unit: None

Use this command to

modify the cell access
restriction information,
Value Range: NoneBlk,
including cell status, cell
PsBlk
RNC RAN18.0 and later reserved information
Default Value: PsBlk
and access control
Unit: None
information.
 Modify the basic
information of a cell,
including Max transmit
power of cell, Num of
continuous in sync ind,
Num of continuous out
Value Range: -100~500
RNC RAN18.0 and later of sync ind, Radio link
Unit: 0.1dBm
failure timer Length,
and the transmit power
of the downlink
common channels such
as PSCH, SSCH,
PCPICH and BCH

Use this command to

set call control UTRAN Value Range: 0~15
BSC GBSS18.0 and later
system message Unit: 2dBm
parameters of a cell.

Use this command to

set call control UTRAN Value Range: 0~7
BSC GBSS18.0 and later
system message Unit: dB
parameters of a cell.
 Parameter Value Type
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: includes
the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.
Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Identity-related parameters:
include parameters such as CellId,
IDTYPE, MCC, and the MOC
primary key and foreign key
parameters. The MAE does not
optimize the values of these
parameters.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Fixed-value parameters: includes

the parameters for which the MAE
provides built-in default values that
cannot be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Fixed-value parameters: include
the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.

Fixed-value parameters: include

the parameters for which the MAE
provides built-in default values that
are displayed on the MAE client
and can be modified by users. The
MAE delivers the fixed values of
these parameters based on the
objects that are filtered according
to algorithm requirements.
Range-value parameters: include
the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.

Range-value parameters: include

the parameters for which the MAE
calculates optimization values
according to algorithm
requirements and the value range
of each parameter on the MAE
client or on NEs.
 Parameter
Optimization Type MML Command Parameter
Description

Indicates the
interference
LTE Optimization for MOD randomization
INTERFRANDSWITCH
heavy traffic CELLALGOSWITCH algorithm applied to
TDD and FDD
eNodeBs.

Indicates the modular

for calculating the first
LTE Optimization for MOD resource block (RB) to
EnbInterfRandMod
heavy traffic CELLDLSCHALGO be scheduled based
on interference
randomization.

Indicates whether to
allow the eNodeB to
LTE Optimization for MOD adjust the UE-
CqiAdjAlgoSwitch
heavy traffic CELLALGOSWITCH reported CQI based
on the initial block
error rate (IBLER).

Indicates the switches

LTE Optimization for MOD
DlSchSwitch related to DL
heavy traffic CELLALGOSWITCH
scheduling in the cell.

Indicates whether to
enable dynamic
adjustment on the
number of orthogonal
LTE Optimization for MOD frequency division
PdcchSymNumSwitch
heavy traffic CELLPDCCHALGO multiplexing (OFDM)
symbols occupied by
the physical downlink
control channel
(PDCCH).
 Indicates the strategy
LTE Optimization for MOD for allocating resource
UlRbAllocationStrategy
heavy traffic CELLULSCHALGO blocks (RBs) in the
uplink of the cell.

Indicates the uplink

LTE Optimization for MOD
UlInterfRandomMode interference
heavy traffic CELLULSCHALGO
randomization mode.

This parameter
LTE Optimization for MOD indicates the switches
UlSchSwitch
heavy traffic CELLALGOSWITCH related to uplink (UL)
scheduling in the cell.

Indicates the uplink

LTE Optimization for MOD
UlTargetIBlerAdaptType target IBLER
heavy traffic CELLULSCHALGO
adaptation type.

Indicates whether to
identify large packet
services for SINR
LTE Optimization for MOD UlIBlerAdaptBigTrafficS fluctuation-based
heavy traffic CELLULSCHALGO w target IBLER
adaptation or pulse
SINR change-based
IBLER adaptation.
 MOD Indicates whether to
LTE Optimization for
ENODEBALGOSWITC HoSignalingOptSwitch enable handover
heavy traffic
H signaling optimization.

Indicates whether to
LTE Optimization for MOD enable power control
UlPcAlgoSwitch
heavy traffic CELLALGOSWITCH for the PUSCH or
PUCCH.

ndicates whether to
MOD
LTE Optimization for enable intelligent
ENODEBALGOSWITC IOptAlgoSwitch
heavy traffic optimization
H
algorithms.

Indicates whether to
enable the adaptive
MOD
LTE Optimization for configuration of
RLCPDCPPARAGROU RlcParaAdaptSwitch
heavy traffic parameters related to
P
Radio Link Control
(RLC).

Indicates the length of

MOD
LTE Optimization for eNodeBPollRtrTimerPre the polling PDU
RLCPDCPPARAGROU
heavy traffic set retransmission timer
P
for the eNodeB.
 Indicates whether to
enable adaptive
LTE Optimization for configuration of
MOD SRBCFG SrbRlcParaAdaptSwitch
heavy traffic parameters related to
Radio Link Control
(RLC) on SRBs.

Indicates the UE
number threshold for
LTE Optimization for SrbPollTimerAdjUserNu
MOD SRBCFG triggering the SRB
heavy traffic mThd
RLC parameter
adaptation.

Indicates whether to
LTE Optimization for MOD PdcchPowerEnhancedS enable enhanced
heavy traffic CELLPDCCHALGO witch PDCCH power
control.

Indicates whether to
enable uplink
LTE Optimization for MOD
UplinkCompSwitch coordinated multipoint
heavy traffic CELLALGOSWITCH
reception (UL CoMP)
for a cell.

Indicates the channel

LTE Optimization for resource allocation
MOD PUCCHCFG Format2ChAllocMode
heavy traffic mode for PUCCH
format 2/2a/2b.

Indicates whether to
enable a specific
LTE Optimization for MOD
CellSchStrategySwitch scheduling policy in
heavy traffic CELLALGOSWITCH
the uplink and
downlink.
 Indicates whether
optimization of the
mechanism for
LTE Optimization for TimingAdvCmdOptSwitc
MOD TATIMER delivering the uplink
heavy traffic h
time alignment
command takes
effect.

Indicates the length of

LTE Optimization for the uplink time
MOD TATIMER TimeAlignmentTimer
heavy traffic alignment timer for
UEs in the cell.

Indicates the
aperiodic CQI
resource
MOD
LTE Optimization for HoAperiodicCqiCfgSwitc configurations and the
CELLCQIADAPTIVEC
heavy traffic h triggering condition of
FG
aperiodic CQI
reporting during
handovers.

Indicates the duration

within which the
eNodeB performs
LTE Optimization for downlink scheduling
MOD CellDlschAlgo HoStaticMcsTimer
heavy traffic based on a low
modulation and
coding scheme (MCS)
order in handovers.

Indicates whether to
enable network
MOD
LTE Optimization for performance
ENODEBALGOSWITC HighLoadNetOptSwitch
heavy traffic optimization when the
H
network is heavily
loaded.

Indicates whether to
LTE Optimization for MOD PdcchCapacityImprove enable optimization
heavy traffic CELLPDCCHALGO Switch on PDCCH capacity
expansion.
 Indicates whether to
enable optimization
MOD
LTE Optimization for on handover-related
ENODEBALGOSWITC HoCommOptSwitch
heavy traffic common
H
configurations and
algorithms.

Indicates the
scheduling policy for
the initial PUSCH
transmission that is
LTE Optimization for MOD detected as
PuschDtxSchStrategy
heavy traffic CELLULSCHALGO discontinuous
transmission (DTX)
when PuschDtxSwitch
of the UlSchSwitch
parameter is on.

Indicates the upper

limit of RSRP in
LTE Optimization for
MOD CELLPCALGO PuschRsrpHighThd closed-loop power
heavy traffic
control for the
PUSCH.

Indicates whether to
LTE Optimization for enable or disable
MOD CellAlgoSwitch UlSchExtSwitch
heavy traffic extended functions of
uplink scheduling.

Indicates the period of

LTE Optimization for
MOD CELLPCALGO PucchPcPeriod power control for the
heavy traffic
PUCCH.

Indicates the offset to

the target signal to
LTE Optimization for PucchPcTargetSinrOffs interference plus
MOD CELLPCALGO
heavy traffic et noise ratio (SINR) in
power control for the
PUCCH.
 Indicates the target
UE transmit power for
the PUCCH expected
LTE Optimization for MOD
P0NominalPUCCH by the eNodeB on
heavy traffic CELLULPCCOMM
condition that normal
demodulation can be
performed.

Indicates whether the

P0NominalPUCCH
LTE Optimization for PucchCloseLoopPcTyp parameter affects
MOD CELLPCALGO
heavy traffic e closed-loop power
control (CL PC) for
the PUCCH.

Indicates whether to
MOD
LTE Optimization for enable automatic
ENODEBALGOSWITC ANRSWITCH
heavy traffic neighbor relation
H
(ANR).

Indicates whether to
MOD
LTE Optimization for optimize protocol
GLOBALPROCSWITC ProtocolMsgOptSwitch
heavy traffic messages sent by the
H
eNodeB.

Indicates the code

LTE Optimization for rate of system
MOD CELLSIMAP SiTransEcr
heavy traffic information
transmission.
 Indicates whether the
eNodeB uses a new
LTE Optimization for mechanism to send
MOD CELLSIMAP SibTransCtrlSwitch
heavy traffic system information
block (SIB)
messages.

Indicates the resource

proportion in SI
scheduling and
LTE Optimization for
MOD CELLSIMAP SiSchResRatio controls whether SI-
heavy traffic
based GAP
optimization takes
effect.

Indicates whether to
enable the
mechanism of
LTE Optimization for MOD UlPdcchAllocImproveSw increasing the control
heavy traffic CELLPDCCHALGO itch channel element
(CCE) resource
allocation success
rate in the uplink.

Indicates the
LTE Optimization for MOD
PdcchMaxCodeRate maximum coding rate
heavy traffic CELLPDCCHALGO
on the PDCCH.

MOD Indicates the

LTE Optimization for
GLOBALPROCSWITC RrcConnPunishThd threshold for an RRC
heavy traffic
H connection penalty.

Indicates the length of

the timer for the
MOD
LTE Optimization for FilterReptRrcConnReqT eNodeB to filter
RRCCONNSTATETIM
heavy traffic imer repeated RRC
ER
Connection Request
messages.
 Indicates whether to
enable the
LTE Optimization for mechanism of
MOD TATIMER TimingResOptSwitch
heavy traffic optimized resource
scheduling for uplink
timing.

Indicates the SRS

power control
algorithm, which can
be SINR-based SRS
LTE Optimization for power control
MOD CELLPCALGO SrsPcStrategy
heavy traffic algorithm or the SRS
power control
algorithm based on
the converged SINR
and RSRP.

Indicates the strategy

LTE Optimization for MOD
RbgAllocStrategy of RBG resource
heavy traffic CELLDLSCHALGO
allocation.

Indicates whether to
LTE Optimization for MOD enable or disable
HarqAlgoSwitch
heavy traffic CELLALGOSWITCH HARQ-related
algorithms.

Indicates the adaptive

LTE Optimization for MOD PDCCHAggLvlAdaptStr strategy of the
heavy traffic CELLPDCCHALGO age PDCCH aggregation
level.

Indicates the
MOD
LTE Optimization for hysteresis for intra-
INTRAFREQHOGROU IntraFreqHoA3Hyst
heavy traffic frequency handover
P
event A3.
 MOD
LTE Optimization for Indicates the offset for
INTRAFREQHOGROU IntraFreqHoA3Offset
heavy traffic event A3.
P

Indicates the traffic

volume threshold of a
bearer above which
the bearer is
determined as a
LTE Optimization for MOD DataThdInPdcchPdsch bearer with large
heavy traffic CELLDLSCHALGO Bal packets in the
PDCCH and PDSCH
resource allocation
optimization
mechanism when
traffic is heavy.
Indicates the
threshold for the
number of
synchronized UEs in a
cell above which the
LTE Optimization for MOD UeNumThdInPdcchPds PDCCH and PDSCH
heavy traffic CELLDLSCHALGO chBal resource allocation
optimization
mechanism is
activated in large
traffic volume
scenarios.

Indicates the power

LTE Optimization for MOD offset (delta value) of
DeltaPreambleMsg3
heavy traffic CELLULPCCOMM message 3 relative to
the preamble.

Indicates the
maximum ratio of the
LTE Optimization for MOD
CceMaxInitialRatio uplink and downlink
heavy traffic CELLPDCCHALGO
initial CCEs on the
PDCCH.

Indicates whether to
increase the
scheduling request
LTE Optimization for MOD indicator (SRI) false
SriFalseDetThdSwitch
heavy traffic CELLULSCHALGO detection threshold for
UEs in the
discontinuous
reception (DRX) state.
 MOD Indicates the length of
LTE Optimization for
RLCPDCPPARAGROU DISCARDTIMER the PDCP discard
heavy traffic
P timer.

Indicates the switch

LTE Optimize problem MOD
AcBarAlgoSwitch for the access barring
cells CELLALGOSWITCH
algorithm.

Indicates the average

LTE Optimize problem access barring
MOD CELLACBAR AcBarTimeForCall
cells duration for mobile-
originated calls.
 Indicates the average
LTE Optimize problem access barring
MOD CELLACBAR AcBarTimeForSig
cells duration for signaling.

Indicates whether to
MOD
LTE Optimize problem enable scheduling
GLOBALPROCSWITC SriAdaptiveSwitch
cells request indication
H
(SRI) adaptation.

LTE Optimize problem MOD Indicates the adaptive

SrsPeriodAdaptive
cells SRSADAPTIVECFG switch of SRS period.

Indicates the switch

used to enable or
disable change in the
cell-specific SRS
subframe
LTE Optimize problem MOD
SrsAlgoSwitch configuration (that is,
cells CELLALGOSWITCH
the adjustment on the
setting of the
SrsSubframeCfg
parameter).
 MAE Value Range and
NE Version Operation Description
Unit

Value Range: OFF,

Use this command to ECO_BASED,
eNodeB(FDD modify the settings of ENB_BASED
eRAN11.0 and later
LTE) cell-level algorithm Default Value:
switches. ENB_BASED
Unit: None

Value Range: MOD3,

Use this command to
MOD4, MOD6
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value: MOD3,
LTE) DL scheduling
MOD4
algorithm.
Unit: None

Value Range:
DlCqiAdjDeltaOptSwitch,
RptCqiFltInitSwitch,
StepVarySwitch,
Use this command to
AdaptiveStepVarySwitch
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value:
LTE) cell-level algorithm
DlCqiAdjDeltaOptSwitch-1,
switches.
RptCqiFltInitSwitch-1,
StepVarySwitch-1,
AdaptiveStepVarySwitch-1
Unit: None

Value Range:
AperiodicCqiTrigOptSwitch,
SubframeSchDiffSwitch,
NonGbrBundlingSwitch,
Use this command to
FreqSelSwitch
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value:
FDD LTE) cell-level algorithm
AperiodicCqiTrigOptSwitch-
switches.
1, SubframeSchDiffSwitch-
1, NonGbrBundlingSwitch-
1, FreqSelSwitch-0
Unit: None

Value Range: OFF, ON,

Use this command to
ECFIADAPTIONON
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value:
FDD LTE) the PDCCH resource
ECfiAdaptionON
allocation algorithm.
Unit: None
 Value Range:
FS_NONFS_ADAPTIVE,
Use this command to FS_INRANDOM_ADAPTIV
eNodeB(TDD/ modify the settings of E
eRAN11.0 and later
FDD LTE) UL scheduling Default Value:
algorithm. FS_INRANDOM_ADAPTIV
E
Unit: None

Value Range:
TWO_MODE_BASED_ON
_PCI,
Use this command to
THREE_MODE_BASED_O
eNodeB(FDD modify the settings of
eRAN11.0 and later N_PCI
LTE) UL scheduling
Default Value:
algorithm.
THREE_MODE_BASED_O
N_PCI
Unit: None

Value Range:
UlEnhancedFssSwitch,
UlIblerAdjustSwitch,
UlEnhancedSrSchSwitch,
SchedulerCtrlPowerSwitch,
PuschDtxSwitch,
PuschDtxSchOptSwitch,
Use this command to
PreAllocationSwitch
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value:
FDD LTE) cell-level algorithm
UlEnhancedFssSwitch-1,
switches.
UlIblerAdjustSwitch-1,
UlEnhancedSrSchSwitch-1,
SchedulerCtrlPowerSwitch,
PuschDtxSwitch,
PuschDtxSchOptSwitch-1,
PreAllocationSwitch-0
Unit: None

Value Range:
SinrFlunIBlerAdaptSwitch,
SinrJumpIBlerAdaptSwitch
Use this command to
Default Value:
eNodeB(FDD modify the settings of
eRAN11.0 and later SinrFlunIBlerAdaptSwitch-
LTE) UL scheduling
1,
algorithm.
SinrJumpIBlerAdaptSwitch-
1
Unit: None

Use this command to

Value Range: OFF, ON
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value: OFF
LTE) UL scheduling
Unit: None
algorithm.
 Value Range:
ReduceInvalidA1A2RptSig
Use this command to
Switch
eNodeB(FDD modify the configuration
eRAN11.0 and later Default Value:
LTE) of eNodeB-level
ReduceInvalidA1A2RptSig
algorithm switches.
Switch-1
Unit: None

Value Range:
PucchInitialPcSwitch,
PuschRsrpHighThdSwitch,
PucchPcDtxSinrSwitch,
Use this command to
SrsPcSwitch
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value:
LTE) cell-level algorithm
PucchInitialPcSwitch-1,
switches.
PuschRsrpHighThdSwitch-
1, PucchPcDtxSinrSwitch-
1, SrsPcSwitch-0
Unit: None

Use this command to Value Range: ACHSwitch

eNodeB(TDD/ modify the configuration Default Value: ACHSwitch-
eRAN11.0 and later
FDD LTE) of eNodeB-level 1
algorithm switches. Unit: None

Use this command to Value Range: OFF, ON

eNodeB(TDD/
eRAN11.0 and later modify an RLC/PDCP Default Value: ON
FDD LTE)
parameter group. Unit: None

Value Range: m5, m10,

m15, m20, m25, m30, m35,
m40, m45, m50, m55, m60,
m65, m70, m75, m80, m85,
m90, m95, m100, m105,
m110, m115, m120, m125,
m130, m135, m140, m145,
Use this command to
eNodeB(FDD m150, m155, m160, m165,
eRAN11.0 and later modify an RLC/PDCP
LTE) m170, m175, m180, m185,
parameter group.
m190, m195, m200, m205,
m210, m215, m220, m225,
m230, m235, m240, m245,
m250, m300, m350, m400,
m450, m500
Default Value: m500
Unit: None
 Use this command to Value Range: OFF, ON
eNodeB(FDD
eRAN11.0 and later modify the SRB Default Value: ON
LTE)
configurations. Unit: None

Use this command to Value Range: 0~5000

eNodeB(FDD
eRAN11.0 and later modify the SRB Default Value: 150
LTE)
configurations. Unit: None

Use this command to

Value Range: OFF, ON
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value: ON
LTE) the PDCCH resource
Unit: None
allocation algorithm.

Value Range:
Use this command to
UlJointReceptionSwitch
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value:
LTE) cell-level algorithm
UlJointReceptionSwitch-1
switches.
Unit: None

Value Range:
FIXEDMODE,
Use this command to
eNodeB(FDD RANDOMMODE
eRAN11.0 and later modify the PUCCH
LTE) Default Value:
configuration.
RANDOMMODE
Unit: None

Value Range:
Use this command to
AbnUeSchSwitch
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value:
LTE) cell-level algorithm
AbnUeSchSwitch-1
switches.
Unit: None
 Use this command to
modify the parameters Value Range: OFF, ON
eNodeB(TDD/
eRAN11.0 and later of the uplink time Default Value: ON
FDD LTE)
alignment timer for UEs Unit: None
in a cell.

Value Range: SF500,

Use this command to
SF750, SF1280, SF1920,
modify the parameters
eNodeB(TDD/ SF2560, SF5120,
eRAN11.0 and later of the uplink time
FDD LTE) SF10240, INFINITY
alignment timer for UEs
Default Value: INFINITY
in a cell.
Unit: None

Use this command to

Value Range: OFF, ON
eNodeB(FDD modify the parameters
eRAN11.0 and later Default Value: ON
LTE) related to CQI
Unit: None
adaptation.

Use this command to

Value Range: 0~100
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value: 10
LTE) DL scheduling
Unit: ms
algorithm.

Value Range:
SPECSIGRETRANSOPTS
Use this command to
WITCH
eNodeB(TDD/ modify the configuration
eRAN11.0 and later Default Value:
FDD LTE) of eNodeB-level
SPECSIGRETRANSOPTS
algorithm switches.
WITCH-1
Unit: None

Use this command to

Value Range: OFF, ON
eNodeB(FDD modify the settings of
eRAN11.0 and later Default Value: ON
LTE) the PDCCH resource
Unit: None
allocation algorithm.
 Value Range:
Use this command to DrxBasedSriGapOptSwitch
eNodeB(TDD/ modify the configuration Default Value:
eRAN11.0 and later
FDD LTE) of eNodeB-level DrxBasedSriGapOptSwitch
algorithm switches. -1
Unit: None

Value Range: NEW_TX,

Use this command to ADAPTIVE_RETX,
eNodeB(FDD modify the settings of EN_ADAPTIVE_RETX
eRAN11.0 and later
LTE) UL scheduling Default Value:
algorithm. ADAPTIVE_RETX
Unit: None

Use this command to

modify the settings of Value Range: -126~24
eNodeB(FDD
eRAN11.0 and later parameters for the cell- Default Value: -96
LTE)
level power control Unit: dBm
algorithm.

Value Range:
Use this command to UlDataFitterRbCalcSwitch
eNodeB(FDD modify the settings of Default Value:
eRAN11.0 and later
LTE) cell-level algorithm UlDataFitterRbCalcSwitch-
switches. 1
Unit: None

Use this command to

modify the settings of Value Range: 1~10
eNodeB(TDD/
eRAN11.0 and later parameters for the cell- Default Value: 1
FDD LTE)
level power control Unit: 20ms
algorithm.

Use this command to

modify the settings of Value Range: 0~15
eNodeB(TDD/
eRAN11.0 and later parameters for the cell- Default Value: 10
FDD LTE)
level power control Unit: dB
algorithm.
 Use this command to
Value Range: -127~-96
eNodeB(TDD/ modify the configuration
eRAN11.0 and later Default Value: -105
FDD LTE) of uplink power control
Unit: dBm
for a cell.

Value Range:
Use this command to NOT_USE_P0NOMINALP
modify the settings of UCCH,
eNodeB(TDD/
eRAN11.0 and later parameters for the cell- USE_P0NOMINALPUCCH
FDD LTE)
level power control Default Value:
algorithm. USE_P0NOMINALPUCCH
Unit: None

Value Range:
IntraRatFastAnrSwitch,
UtranFastAnrSwitch,
GeranFastAnrSwitch,
Use this command to
CdmaFastAnrSwitch
eNodeB(TDD/ modify the configuration
eRAN11.0 and later Default Value:
FDD LTE) of eNodeB-level
IntraRatFastAnrSwitch-0,
algorithm switches.
UtranFastAnrSwitch-0,
GeranFastAnrSwitch-0,
CdmaFastAnrSwitch-0
Unit: None

Value Range:
RrcSetupOptSwitch,
IucsRrcRecfgMcCombSwitc
h,
Use this command to RcrpRrcRecfgMcCombSwit
modify the settings of ch
eNodeB(FDD
eRAN11.0 and later parameters related to Default Value:
LTE)
some global functions in RrcSetupOptSwitch-1,
the eNodeB. IucsRrcRecfgMcCombSwitc
h-1,
RcrpRrcRecfgMcCombSwit
ch-1
Unit: None

Use this command to Value Range: 27~1000

eNodeB(FDD
eRAN11.0 and later modify the SIB-to-SI Default Value: 54
LTE)
mapping. Unit: None
 Use this command to Value Range: OFF, ON
eNodeB(FDD
eRAN11.0 and later modify the SIB-to-SI Default Value: ON
LTE)
mapping. Unit: None

Use this command to Value Range: 0,40~100

eNodeB(FDD
eRAN11.0 and later modify the SIB-to-SI Default Value: 100
LTE)
mapping. Unit: None

Value Range:
ReserveCommonCCESwitc
Use this command to
h
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value:
FDD LTE) the PDCCH resource
ReserveCommonCCESwitc
allocation algorithm.
h-1
Unit: None

Use this command to

Value Range: 75~120
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value: 95
FDD LTE) the PDCCH resource
Unit: None
allocation algorithm.

Use this command to

modify the settings of Value Range: 0~100
eNodeB(FDD
eRAN11.0 and later parameters related to Default Value: 100
LTE)
some global functions in Unit: None
the eNodeB.

Use this command to

Value Range: 0~15
eNodeB(FDD modify the parameters
eRAN11.0 and later Default Value: 15
LTE) related to the timers of
Unit: None
RRC connection control.
 Use this command to
modify the parameters Value Range: OFF, ON
eNodeB(FDD
eRAN11.0 and later of the uplink time Default Value: ON
LTE)
alignment timer for UEs Unit: None
in a cell.

Value Range:
Use this command to SRSPC_SINR_BASED,
modify the settings of SRSPC_SINR_RSRP_BAS
eNodeB(TDD
eRAN11.0 and later parameters for the cell- ED
LTE)
level power control Default Value:
algorithm. SRSPC_SINR_BASED
Unit: None

Value Range:
Use this command to
ROUND_DOWN,
eNodeB(TDD modify the settings of
eRAN11.0 and later ROUND_UP, ADAPTIVE
LTE) DL scheduling
Default Value: ADAPTIVE
algorithm.
Unit: None

Value Range:
TddAckFbModeCfgOptSwit
Use this command to
ch
eNodeB(TDD modify the settings of
eRAN11.0 and later Default Value:
LTE) cell-level algorithm
TddAckFbModeCfgOptSwit
switches.
ch-0
Unit: None

Value Range:
STRATEGYBASEDONCO
VERAGE,
Use this command to
STRATEGYBASEDONCAP
eNodeB(TDD modify the settings of
eRAN11.0 and later ACITY
LTE) the PDCCH resource
Default Value:
allocation algorithm.
STRATEGYBASEDONCAP
ACITY
Unit: None

Use this command to

Value Range: 0~30
eNodeB(TDD modify a parameter
eRAN11.0 and later Default Value: 4
LTE) group related to intra-
Unit: 0.5dB
frequency handover.
 Use this command to
Value Range: -30~30
eNodeB(TDD modify a parameter
eRAN11.0 and later Default Value: 6
LTE) group related to intra-
Unit: 0.5dB
frequency handover.

Use this command to

Value Range: 0~1000000
eNodeB(TDD modify the settings of
eRAN11.0 and later Default Value: 36000
LTE) DL scheduling
Unit: bit
algorithm.

Use this command to

Value Range: 0~1000
eNodeB(TDD modify the settings of
eRAN11.0 and later Default Value: 300
LTE) DL scheduling
Unit: None
algorithm.

Use this command to

Value Range: -1~6
eNodeB(TDD modify the configuration
eRAN11.0 and later Default Value: 0
LTE) of uplink power control
Unit: 2dB
for a cell.

Value Range: 1_2, 1_1,

Use this command to
2_1, 3_1, 4_1, 5_1, 6_1,
eNodeB(TDD modify the settings of
eRAN11.0 and later 7_1, 8_1, 9_1, 10_1
LTE) the PDCCH resource
Default Value: 10_1, 2_1
allocation algorithm.
Unit: None

Use this command to

Value Range: OFF, ON
eNodeB(TDD modify the settings of
eRAN11.0 and later Default Value: ON
LTE) UL scheduling
Unit: None
algorithm.
 Value Range:
DiscardTimer_50,
DiscardTimer_100,
DiscardTimer_150,
Use this command to
eNodeB(TDD DiscardTimer_300,
eRAN11.0 and later modify an RLC/PDCP
LTE) DiscardTimer_500,
parameter group.
DiscardTimer_750,
DiscardTimer_1500,
DiscardTimer_Infinity
Unit: ms
Value Range:
ACBAR_SWITCH_DYNAMI
C,
Use this command to
ACBAR_SWITCH_STATIC,
eNodeB(TDD/ modify the settings of
eRAN11.0 and later ACBAR_SWITCH_DISABL
FDD LTE) cell-level algorithm
E
switches.
Default Value:
ACBAR_SWITCH_STATIC
Unit: None

Value Range:
ACCESS_BARRING_TIME
_S4,
ACCESS_BARRING_TIME
_S8,
ACCESS_BARRING_TIME
_S16,
ACCESS_BARRING_TIME
_S32,
ACCESS_BARRING_TIME
Use this command to
eNodeB(TDD/ _S64,
eRAN11.0 and later modify the configuration
FDD LTE) ACCESS_BARRING_TIME
of cell access barring
_S128,
ACCESS_BARRING_TIME
_S256,
ACCESS_BARRING_TIME
_S512
Default Value:
ACCESS_BARRING_TIME
_S4
Unit: s
 Value Range:
ACCESS_BARRING_TIME
_S4,
ACCESS_BARRING_TIME
_S8,
ACCESS_BARRING_TIME
_S16,
ACCESS_BARRING_TIME
_S32,
ACCESS_BARRING_TIME
Use this command to
eNodeB(TDD/ _S64,
eRAN11.0 and later modify the configuration
FDD LTE) ACCESS_BARRING_TIME
of cell access barring
_S128,
ACCESS_BARRING_TIME
_S256,
ACCESS_BARRING_TIME
_S512
Default Value:
ACCESS_BARRING_TIME
_S4
Unit: s

Use this command to

modify the settings of Value Range: OFF, ON
eNodeB(TDD/
eRAN11.0 and later parameters related to Default Value: ON
FDD LTE)
some global functions in Unit: None
the eNodeB.

Use this command to Value Range: OFF, ON

eNodeB(TDD/
eRAN11.0 and later modify the adaptive Default Value: ON
FDD LTE)
switch of SRS period. Unit: None

Value Range:
Use this command to
SrsSubframeRecfSwitch
eNodeB(TDD/ modify the settings of
eRAN11.0 and later Default Value:
FDD LTE) cell-level algorithm
SrsSubframeRecfSwitch-1
switches.
Unit: None
 Parameter Value Type
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
Fixed-value parameters: include the
parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.

Fixed-value parameters: include the

parameters for which the MAE
provides built-in default values that are
displayed on the MAE client and can
be modified by users. The MAE
delivers the fixed values of these
parameters based on the objects that
are filtered according to algorithm
requirements.
 Parameter
Optimization Type MML Command Parameter
Description

D-MIMO Smart Cluster Indicates the function

DSP LICINFO FUNCTIONTYPE
Organization type.

Indicates the number

D-MIMO Smart Cluster
DSP BRDMFRINFO CN of the cabinet where
Organization
the board is located.

D-MIMO Smart Cluster Indicates the subrack

DSP BRDMFRINFO SRN
Organization number of the board.

D-MIMO Smart Cluster Indicates the slot

DSP BRDMFRINFO SN
Organization number of the board.

D-MIMO Smart Cluster Indicates a co-

ADD COPROCRES CoProcResId
Organization processing resource.

Indicates the ID of the

D-MIMO Smart Cluster baseband equipment
ADD COPROCRES BaseBandEqmId
Organization providing coordinated
processing resources.

D-MIMO Smart Cluster Indicates the DMIMO

ADD DMIMOCLUSTER DMIMOClusterId
Organization static cluster index.

D-MIMO Smart Cluster Identifies a co-

ADD DMIMOCLUSTER CoProcResId
Organization processing resource.
 ADD
D-MIMO Smart Cluster Indicates the DMIMO
DMIMOCLUSTERCEL DMIMOClusterId
Organization static cluster index.
L

ADD
D-MIMO Smart Cluster Indicates the unique
DMIMOCLUSTERCEL CellId
Organization ID of a cell.
L

ADD
D-MIMO Smart Cluster Indicates the ID of an
DMIMOCLUSTERCEL eNodeBId
Organization eNodeB.
L

Indicates the mobile

ADD
D-MIMO Smart Cluster country code (MCC)
DMIMOCLUSTERCEL Mcc
Organization of a DMIMO cluster
L
cell.

Indicates the mobile

ADD
D-MIMO Smart Cluster network code (MNC)
DMIMOCLUSTERCEL Mnc
Organization of a cell in the DMIMO
L
cluster.

Indicates the local ID

D-MIMO Smart Cluster MOD of the cell. It uniquely
LocalCellId
Organization CELLALGOSWITCH identifies a cell within
a BS.

Indicates whether to
D-MIMO Smart Cluster MOD enable the
BFAlgoSwitch
Organization CELLALGOSWITCH beamforming
algorithm.

Indicates whether to
D-MIMO Smart Cluster MOD enable multi-user
MuBfAlgoSwitch
Organization CELLALGOSWITCH beamforming (MU
beamforming).
 Indicates whether to
D-MIMO Smart Cluster MOD
DMIMOAlgoSwitch enable DMIMO
Organization CELLALGOSWITCH
algorithms.

Indicates whether to
D-MIMO Smart Cluster MOD
EnhChnCalSwitch enable enhanced
Organization CELLALGOSWITCH
channel calibration.

Indicates the local cell

MOD
D-MIMO Smart Cluster ID. It uniquely
CELLBFMIMOPARAC LocalCellId
Organization identifies a cell within
FG
an eNodeB.

Indicates whether
TM2 can be
adaptively selected
MOD when the
D-MIMO Smart Cluster BfMimoAdapWithoutTm
CELLBFMIMOPARAC BfMimoAdaptiveSwitc
Organization 2
FG h parameter is set to
MIMO_BF_ADAPTIV
E(MIMO_BF_ADAPTI
VE).

Indicates the
MOD beamforming and
D-MIMO Smart Cluster
CELLBFMIMOPARAC InitialBfMimoType MIMO mode used
Organization
FG during initial network
access.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
DEA CELL LocalCellId
Organization identifies a cell within
a BS.

Indicates the ID of the

sector device. It
D-MIMO Smart Cluster RMV uniquely identifies a
SECTOREQMID
Organization SFNAUXRESBIND piece of sector
equipment within an
eNodeB.

D-MIMO Smart Cluster RMV Indicates the ID of the

ENODEBID
Organization SFNAUXRESBIND main eNodeB.
 Indicates the local cell
D-MIMO Smart Cluster RMV
LOCALCELLID ID of a cell of the
Organization SFNAUXRESBIND
primary eNodeB.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
RMV SFNCELLBIND LocalCellId
Organization identifies a cell within
a eNodeB.

D-MIMO Smart Cluster Indicates the ID of the

RMV SFNCELLBIND eNodeBId
Organization auxiliary eNodeB.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
ADD SFNCELLBIND LocalCellId
Organization identifies a cell within
a eNodeB.

D-MIMO Smart Cluster Indicates the ID of the

ADD SFNCELLBIND eNodeBId
Organization auxiliary eNodeB.

Indicates the ID of the

sector device. It
D-MIMO Smart Cluster ADD uniquely identifies a
SECTOREQMID
Organization SFNAUXRESBIND piece of sector
equipment within an
eNodeB.

D-MIMO Smart Cluster ADD Indicates the ID of the

ENODEBID
Organization SFNAUXRESBIND main eNodeB.

Indicates the local cell

ID of a cell of the
D-MIMO Smart Cluster ADD primary eNodeB. It
LOCALCELLID
Organization SFNAUXRESBIND uniquely identifies a
cell within the primary
eNodeB.
 Indicates the ID of the
D-MIMO Smart Cluster ADD
BaseBandEqmId baseband equipment
Organization SFNAUXRESBIND
serving a cell.

Indicates the
reference signal
power of the single
frequency network
(SFN) auxiliary
eNodeB resource.
The value 32767
D-MIMO Smart Cluster ADD
ReferenceSignalPwr indicates that this
Organization SFNAUXRESBIND
reference signal
power parameter is
invalid. In this case,
the cell uses the
reference signal
power specified in the
PDSCHCfg MO.

Indicates the local ID

D-MIMO Smart Cluster RMV of a cell. It uniquely
LocalCellId
Organization EUCELLSECTOREQM identifies a cell within
an eNodeB.

Indicates the ID of the

D-MIMO Smart Cluster RMV
SectorEqmId sector equipment
Organization EUCELLSECTOREQM
serving a cell.

Indicates the local cell

D-MIMO Smart Cluster ADD identity. It uniquely
LocalCellId
Organization EUCELLSECTOREQM identifies a cell within
an eNodeB.

Indicates the ID of the

sector device that
D-MIMO Smart Cluster serves the cell,it
ADD EUCELLSECTOREQM
SectorEqmId
Organization uniquely identifies a
sector device within
an eNodeB.

Indicates the
D-MIMO Smart Cluster ADD reference signal
ReferenceSignalPwr
Organization EUCELLSECTOREQM power of the cell
sector device.
 Indicates the ID of the
D-MIMO Smart Cluster ADD
BaseBandEqmId baseband equipment
Organization EUCELLSECTOREQM
serving a cell.

Indicates whether to
D-MIMO Smart Cluster enable or disable the
MOD CELL MultiRruCellFlag
Organization multi-RRU cell
feature.

D-MIMO Smart Cluster Indicates the type of

MOD CELL MultiRruCellMode
Organization the multi-RRU cell.

Indicates the number

D-MIMO Smart Cluster of physical cells
MOD CELL SectorEqmNum
Organization consisting an SFN
cell.

Indicates the
D-MIMO Smart Cluster transmission and
MOD CELL TxRxMode
Organization reception mode of the
cell.

D-MIMO Smart Cluster Indicates the physical

MOD CELL PhyCellId
Organization cell ID.

Indicates the cell

D-MIMO Smart Cluster reference signal
MOD PDSCHCFG ReferenceSignalPwr
Organization power of each
physical antenna.

Indicates the local cell

D-MIMO Smart Cluster MOD identity. It uniquely
LocalCellId
Organization EUCELLPRIBBEQM identifies a cell within
an eNodeB.
 Indicates the ID of the
D-MIMO Smart Cluster MOD primary baseband
PriBaseBandEqmId
Organization EUCELLPRIBBEQM equipment that serves
a cell.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
ACT CELL LocalCellId
Organization identifies a cell within
a BS.

Indicates the SFN

uplink scheduling
mode. The uplink
scheduling modes
include the joint
D-MIMO Smart Cluster
MOD CellAlgoSwitch SfnUlSchSwitch scheduling mode, and
Organization
the auto-selection
mode between joint
scheduling and
independent
scheduling.

Indicates the SFN

downlink scheduling
mode. The downlink
scheduling modes
include the joint
D-MIMO Smart Cluster
MOD CellAlgoSwitch SfnDlSchSwitch scheduling mode, and
Organization
the auto-selection
mode between joint
scheduling and
independent
scheduling.
Indicates whether to
enable load-based
D-MIMO Smart Cluster SfnLoadBasedAdptSwit
MOD CellAlgoSwitch adaptive adjustment
Organization ch
in the adaptive
SFN/SDMA feature.
Indicates whether to
enable algorithms
D-MIMO Smart Cluster
MOD CellAlgoSwitch SfnAlgoSwitch related to single
Organization
frequency networks
(SFNs).
Indicates whether to
MOD
D-MIMO Smart Cluster enable inter-eNodeB
ENODEBALGOSWITC OverBBUsSwitch
Organization coordination
H
algorithms.

Indicates the cell ID of

MOD
D-MIMO Smart Cluster the local cell. It
EUTRANINTRAFREQ LocalCellId
Organization uniquely identifies a
NCELL
cell within an eNodeB.
 Indicates the mobile
MOD
D-MIMO Smart Cluster country code of the E-
EUTRANINTRAFREQ Mcc
Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

MOD
D-MIMO Smart Cluster network code of the
EUTRANINTRAFREQ Mnc
Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the intra-
MOD
D-MIMO Smart Cluster frequency neighboring
EUTRANINTRAFREQ eNodeBId
Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.

Indicates the ID of the

MOD intra-frequency
D-MIMO Smart Cluster
EUTRANINTRAFREQ CellId neighboring cell. It
Organization
NCELL uniquely identifies a
cell within an eNodeB.

Indicates the cell ID of

MOD
D-MIMO Smart Cluster the local cell. It
EUTRANINTERFREQ LocalCellId
Organization uniquely identifies a
NCELL
cell within an eNodeB.

Indicates the mobile

MOD
D-MIMO Smart Cluster country code of the E-
EUTRANINTERFREQ Mcc
Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

MOD
D-MIMO Smart Cluster network code of the
EUTRANINTERFREQ Mnc
Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the inter-
MOD
D-MIMO Smart Cluster frequency neighboring
EUTRANINTERFREQ eNodeBId
Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.
 Indicates the ID of the
MOD inter-frequency
D-MIMO Smart Cluster
EUTRANINTERFREQ CellId neighboring cell. It
Organization
NCELL uniquely identifies a
cell within an eNodeB.

Indicates the mobile

MOD
D-MIMO Smart Cluster country code of the
EUTRANEXTERNALC MCC
Organization external E-UTRAN
ELL
cell.

Indicates the mobile

MOD
D-MIMO Smart Cluster network code of the
EUTRANEXTERNALC MNC
Organization external E-UTRAN
ELL
cell.

MOD Indicates the eNodeB

D-MIMO Smart Cluster
EUTRANEXTERNALC ENODEBID ID of the external E-
Organization
ELL UTRAN cell.

MOD Indicates the cell ID of

D-MIMO Smart Cluster
EUTRANEXTERNALC CELLID the external E-UTRAN
Organization
ELL cell.

Indicates the physical

MOD
D-MIMO Smart Cluster cell identifier (PCI) of
EUTRANEXTERNALC PHYCELLID
Organization the external E-UTRAN
ELL
cell.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
MOD UTRANNCELL LocalCellId
Organization identifies a cell within
an eNodeB.

Indicates the mobile

D-MIMO Smart Cluster country code of the
MOD UTRANNCELL Mcc
Organization neighboring UTRAN
cell.
 Indicates the mobile
D-MIMO Smart Cluster network code of the
MOD UTRANNCELL Mnc
Organization neighboring UTRAN
cell.

Indicates the RNC ID

of the external
D-MIMO Smart Cluster UTRAN cell. There
MOD UTRANNCELL RncId
Organization are two RNC ID
patterns: RNC-ID and
extended RNC-ID.

Indicates the RNC-

wide cell ID of the
D-MIMO Smart Cluster
MOD UTRANNCELL CellId external UTRAN cell.
Organization
It uniquely identifies a
cell within an RNC.

Indicates the cell ID of

RMV
D-MIMO Smart Cluster the local cell. It
EUTRANINTRAFREQ LocalCellId
Organization uniquely identifies a
NCELL
cell within an eNodeB.

Indicates the mobile

RMV
D-MIMO Smart Cluster country code of the E-
EUTRANINTRAFREQ Mcc
Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

RMV
D-MIMO Smart Cluster network code of the
EUTRANINTRAFREQ Mnc
Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the intra-
RMV
D-MIMO Smart Cluster frequency neighboring
EUTRANINTRAFREQ eNodeBId
Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.

Indicates the ID of the

RMV intra-frequency
D-MIMO Smart Cluster
EUTRANINTRAFREQ CellId neighboring cell. It
Organization
NCELL uniquely identifies a
cell within an eNodeB.
 Indicates the cell ID of
RMV
D-MIMO Smart Cluster the local cell. It
EUTRANINTERFREQ LocalCellId
Organization uniquely identifies a
NCELL
cell within an eNodeB.

Indicates the mobile

RMV
D-MIMO Smart Cluster country code of the E-
EUTRANINTERFREQ Mcc
Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

RMV
D-MIMO Smart Cluster network code of the
EUTRANINTERFREQ Mnc
Organization E-UTRAN neighboring
NCELL
cell.
Indicates the eNodeB
ID of the inter-
RMV
D-MIMO Smart Cluster frequency neighboring
EUTRANINTERFREQ eNodeBId
Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.

Indicates the ID of the

RMV inter-frequency
D-MIMO Smart Cluster
EUTRANINTERFREQ CellId neighboring cell. It
Organization
NCELL uniquely identifies a
cell within an eNodeB.

Indicates the mobile

RMV
D-MIMO Smart Cluster country code of the
EUTRANEXTERNALC Mcc
Organization external E-UTRAN
ELL
cell.

Indicates the mobile

RMV
D-MIMO Smart Cluster network code of the
EUTRANEXTERNALC Mnc
Organization external E-UTRAN
ELL
cell.

Indicates the eNodeB

ID of the external E-
RMV
D-MIMO Smart Cluster UTRAN cell. It
EUTRANEXTERNALC ENODEBID
Organization uniquely identifies an
ELL
eNodeB within a
PLMN.

Indicates the cell ID of

RMV the external E-UTRAN
D-MIMO Smart Cluster
EUTRANEXTERNALC CELLID cell. It uniquely
Organization
ELL identifies a cell within
an eNodeB.
 Indicates the physical
RMV
D-MIMO Smart Cluster cell identifier (PCI) of
EUTRANEXTERNALC PHYCELLID
Organization the external E-UTRAN
ELL
cell.

Indicates the local ID

D-MIMO Smart Cluster of the cell. It uniquely
RMV UTRANNCELL LocalCellId
Organization identifies a cell within
an eNodeB.

Indicates the mobile

D-MIMO Smart Cluster country code of the
RMV UTRANNCELL Mcc
Organization neighboring UTRAN
cell.

Indicates the mobile

D-MIMO Smart Cluster network code of the
RMV UTRANNCELL Mnc
Organization neighboring UTRAN
cell.

Indicates the RNC ID

of the external
D-MIMO Smart Cluster UTRAN cell. There
RMV UTRANNCELL RncId
Organization are two RNC ID
patterns: RNC-ID and
extended RNC-ID.
Indicates the RNC-
wide cell ID of the
D-MIMO Smart Cluster
RMV UTRANNCELL CellId external UTRAN cell.
Organization
It uniquely identifies a
cell within an RNC.
 MAE Value Range and
NE Version Operation Description
Unit

Use this command to

eNodeB(TDD GUI Value Range: eNodeB
eRAN 12.1 and later query the license sale
LTE) Unit: None
information.

Use this command to

eNodeB(TDD query the manufacturing GUI Value Range: eNodeB
eRAN 12.1 and later
LTE) information about a Unit: None
board.

Use this command to GUI Value Range: 0~1,

eNodeB(TDD query the manufacturing 4~5, 7~8, 11~12, 14~15,
eRAN 12.1 and later
LTE) information about a 40~254
board. Unit: None

Use this command to

GUI Value Range: 0~8, 16,
eNodeB(TDD query the manufacturing
eRAN 12.1 and later 18~19, 255
LTE) information about a
Unit: None
board.

Use this command to

eNodeB(TDD add information about GUI Value Range: 0~5
eRAN 12.1 and later
LTE) the co-processing Unit: None
resource.

Use this command to

GUI Value Range:
eNodeB(TDD add information about
eRAN 12.1 and later 0~23,255
LTE) the co-processing
Unit: None
resource.

eNodeB(TDD Use this command to GUI Value Range: 0~65535

eRAN 12.1 and later
LTE) add the D-MIMO cluster. Unit: None

eNodeB(TDD Use this command to GUI Value Range: 0~5,255

eRAN 12.1 and later
LTE) add the D-MIMO cluster. Unit: None
 Use this command to
eNodeB(TDD GUI Value Range: 0~65535
eRAN 12.1 and later add a SFN cell to the
LTE) Unit: None
DMIMO cluster.

Use this command to

eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later add a SFN cell to the
LTE) Unit: None
DMIMO cluster.

Use this command to GUI Value Range:

eNodeB(TDD
eRAN 12.1 and later add a SFN cell to the 0~1048575
LTE)
DMIMO cluster. Unit: None

Use this command to GUI Value Range: 3

eNodeB(TDD
eRAN 12.1 and later add a SFN cell to the characters
LTE)
DMIMO cluster. Unit: None

Use this command to GUI Value Range: 2~3

eNodeB(TDD
eRAN 12.1 and later add a SFN cell to the characters
LTE)
DMIMO cluster. Unit: None

Use this command to

eNodeB(TDD modify the settings of GUI Value Range:0~255
eRAN 12.1 and later
LTE) cell-level algorithm Unit: None
switches.

Use this command to

eNodeB(TDD modify the settings of GUI Value Range:BfSwitch
eRAN 12.1 and later
LTE) cell-level algorithm Unit: None
switches.

GUI Value
Range:MuBfSwitch,
Use this command to
TM9MuBfSwitch,
eNodeB(TDD modify the settings of
eRAN 12.1 and later HighOrderMubfSwitch,
LTE) cell-level algorithm
MubfResAdjSwitch,
switches.
HarqRetranPairSwitch
Unit: None
 Use this command to
GUI Value
eNodeB(TDD modify the settings of
eRAN 12.1 and later Range:DmimoJTSwitch
LTE) cell-level algorithm
Unit: None
switches.

Use this command to GUI Value

eNodeB(TDD modify the settings of Range:QUICK_CHN_CAL_
eRAN 12.1 and later
LTE) cell-level algorithm SWITCH
switches. Unit: None

Use this command to

modify the configuration
eNodeB(TDD of adaptive selection GUI Value Range:0~255
eRAN 12.1 and later
LTE) between beamforming Unit: None
and MIMO.

Use this command to

modify the configuration
GUI Value Range: OFF,
eNodeB(TDD of adaptive selection
eRAN 12.1 and later ON
LTE) between beamforming
Unit: None
and MIMO.

Use this command to

modify the configuration
GUI Value Range: TM2,
eNodeB(TDD of adaptive selection
eRAN 12.1 and later TM3
LTE) between beamforming
Unit: None
and MIMO.

Use this command to

eNodeB(TDD disable the cells that GUI Value Range: 0~255
eRAN 12.1 and later
LTE) need to be split and Unit: None
merged into SFN cells.

Use this command to

modify this parameter
eNodeB(TDD after physical cells are GUI Value Range:0~65535
eRAN 12.1 and later
LTE) splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
GUI Value
eNodeB(TDD after physical cells are
eRAN 12.1 and later Range:0~1048575
LTE) splitted or combined into
Unit: None
an SFN cell in such
scenarios.
 Use this command to
modify this parameter
eNodeB(TDD after physical cells are GUI Value Range:0~255
eRAN 12.1 and later
LTE) splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
eNodeB(TDD after physical cells are GUI Value Range:0~255
eRAN 12.1 and later
LTE) splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
GUI Value
eNodeB(TDD after physical cells are
eRAN 12.1 and later Range:0~1048575
LTE) splitted or combined into
Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range:0~255
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter GUI Value
eNodeB(TDD
eRAN 12.1 and later after physical cells are Range:0~1048575
LTE)
combined into an SFN Unit: None
cell in such scenarios.

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range:0~65535
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter GUI Value
eNodeB(TDD
eRAN 12.1 and later after physical cells are Range:0~1048575
LTE)
combined into an SFN Unit: None
cell in such scenarios.

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range:0~255
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.
 Use this command to
modify this parameter
eNodeB(TDD GUI Value Range:0~23,255
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter GUI Value Range:-
eNodeB(TDD
eRAN 12.1 and later after physical cells are 600~500,32767
LTE)
combined into an SFN Unit: 0.1dBm
cell in such scenarios.

Use this command when

eNodeB(TDD the cells that need to be GUI Value Range: 0~255
eRAN 12.1 and later
LTE) split and merged into Unit: None
SFN cells.

Use this command when

eNodeB(TDD the cells that need to be GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) split and merged into Unit: None
SFN cells.

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command after

eNodeB(TDD physical cells are GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) combined into an SFN Unit: None
cell in such scenarios

Use this command after

GUI Value Range: -
eNodeB(TDD physical cells are
eRAN 12.1 and later 600~500,32767
LTE) combined into an SFN
Unit: 0.1dBm
cell in such scenarios
 Use this command to
modify this parameter
eNodeB(TDD GUI Value Range:0~23,255
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

GUI Value Range:
modify this parameter
eNodeB(TDD BOOLEAN_FALSE,
eRAN 12.1 and later after physical cells are
LTE) BOOLEAN_TRUE
combined into an SFN
Unit: None
cell in such scenarios.

GUI Value Range: SFN,

Use this command to CELL_COMBINATION,
modify this parameter TWO_RRU_COMBINATIO
eNodeB(TDD
eRAN 12.1 and later after physical cells are N,
LTE)
combined into an SFN DIGITAL_COMBINATION,
cell in such scenarios. MPRU_AGGREGATION
Unit: None

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range: 2~7
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

GUI Value Range: 1T1R,
modify this parameter
1T2R, 2T2R, 2T4R, 4T4R,
eNodeB(TDD after physical cells are
eRAN 12.1 and later 8T8R, 2T8R, 4T8R,
LTE) splitted or combined into
64T64R
an SFN cell in such
Unit: None
scenarios.

Use this command to

modify this parameter
eNodeB(TDD GUI Value Range: 0~503
eRAN 12.1 and later after physical cells are
LTE) Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter GUI Value Range: -
eNodeB(TDD
eRAN 12.1 and later after physical cells are 600~500
LTE)
combined into an SFN Unit: 0.1dBm
cell in such scenarios.

Use this command to

modify this parameter
eNodeB(TDD after physical cells are GUI Value Range:0~255
eRAN 12.1 and later
LTE) splitted or combined into Unit: None
an SFN cell in such
scenarios.
 Use this command to
modify this parameter
eNodeB(TDD after physical cells are GUI Value Range:0~23
eRAN 12.1 and later
LTE) splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command after

eNodeB(TDD physical cells are GUI Value Range: 0~255
eRAN 12.1 and later
LTE) combined into an SFN Unit: None
cell in such scenarios.

Use this command to

modify this parameter GUI Value Range:
eNodeB(TDD
eRAN 12.1 and later after physical cells are ADAPTIVE, JOINT
LTE)
combined into an SFN Unit: None
cell in such scenarios.

Use this command to GUI Value Range:

modify this parameter GUI Value Range:
SfnPdcchDcsSwitch(SFNP
eNodeB(TDD
eRAN 12.1 and later after physical cells are ADAPTIVE, JOINT
DCCHDCSSWITCH),
LTE)
combined into an SFN Unit: None
SfnUll2SelectiveRcvSwitch(
cell in such scenarios. SfnUll2SelectiveRcvSwitch)
,
SfnPdcchSdmaSwitch(SFN
PDCCHSDMASWITCH),
SfnPucchAckSdmaSwitch(
Use this command to SFNPUCCHACKSDMASWI
modify this parameter GUI
TCH), Value Range: OFF,
eNodeB(TDD
eRAN 12.1 and later after physical cells are ON
SuperCombCellSwitch(Sup
LTE)
combined into an SFN Unit:
GUI None Range:
Value
erCombCellSwitch),
cell in such scenarios. UlJointReceptionOverBBUs
SfnDl2LoadLevelAdptSwitc
Use this command to Switch(UlJointReceptionOv
h(SfnDl2LoadLevelAdptSwi
modify this parameter erBBUsSwitch),
eNodeB(TDD tch),
eRAN 12.1 and later after physical cells are FreqCfgCaOverBBUsSwitc
LTE) SfnDlSchAttriAdjsSwitch(Sf
combined into an SFN h(FreqCfgCaOverBBUsSwit
nDlSchAttriAdjsSwitch),
cell in such scenarios. ch),
Use this command to SfnCbfSwitch(SfnCbfSwitch
UlJROverRelaxedBHSw(Ul
),
modify this parameter
eNodeB(TDD JROverRelaxedBHSw),
SfnVoLteDlJSchSwitch(Sfn
eRAN 12.1 and later after physical cells are
LTE) UlSfnJROverBBUsSwitch(U
VoLteDlJSchSwitch),
combined into an SFN
lSfnJROverBBUsSwitch),
SfnTarRruSelEnhSwitch(Sf
cell in such scenarios.
UlVoiceJROverRelaxedBH
nTarRruSelEnhSwitch),
Use this command to Sw(UlVoiceJROverRelaxed
SfnTarRruAdptSelSwitch(Sf
modify the neighboring BHSw),
nTarRruAdptSelSwitch),
eNodeB(TDD GUI Value Range: 0~255
UlDataJROverRelaxedBHS
SfnVoLteUlJSchSwitch(Sfn
eRAN 12.1 and later relation with an intra-
LTE) Unit: None
w(UlDataJROverRelaxedB
VoLteUlJSchSwitch),
frequency E-UTRAN
cell. HSw)
SfnDlRblerOptSwitch(SfnDl
Unit: None
RblerOptSwitch),
SfnJtSwitch(SfnJtSwitch)
Unit: None
 Use this command to
modify the neighboring GUI Value Range: 3
eNodeB(TDD
eRAN 12.1 and later relation with an intra- characters
LTE)
frequency E-UTRAN Unit: None
cell.

Use this command to

modify the neighboring GUI Value Range: 2~3
eNodeB(TDD
eRAN 12.1 and later relation with an intra- characters
LTE)
frequency E-UTRAN Unit: None
cell.

Use this command to

modify the neighboring GUI Value Range:
eNodeB(TDD
eRAN 12.1 and later relation with an intra- 0~1048575
LTE)
frequency E-UTRAN Unit: None
cell.

Use this command to

modify the neighboring
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later relation with an intra-
LTE) Unit: None
frequency E-UTRAN
cell.

Use this command to

modify the neighboring
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later relation with an inter-
LTE) Unit: None
frequency E-UTRAN
cell.

Use this command to

modify the neighboring GUI Value Range: 3
eNodeB(TDD
eRAN 12.1 and later relation with an inter- characters
LTE)
frequency E-UTRAN Unit: None
cell.

Use this command to

modify the neighboring GUI Value Range: 2~3
eNodeB(TDD
eRAN 12.1 and later relation with an inter- characters
LTE)
frequency E-UTRAN Unit: None
cell.

Use this command to

modify the neighboring GUI Value Range:
eNodeB(TDD
eRAN 12.1 and later relation with an inter- 0~1048575
LTE)
frequency E-UTRAN Unit: None
cell.
 Use this command to
modify the neighboring
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later relation with an inter-
LTE) Unit: None
frequency E-UTRAN
cell.

Use this command to

GUI Value Range: 3
eNodeB(TDD modify the configuration
eRAN 12.1 and later characters
LTE) of an external E-UTRAN
Unit: None
cell.

Use this command to

modify the configuration GUI Value Range: 2~3
eNodeB(TDD
eRAN 12.1 and later of an external E-UTRAN characters
LTE)
cell. Unit: None

Use this command to

GUI Value Range:
eNodeB(TDD modify the configuration
eRAN 12.1 and later 0~1048575
LTE) of an external E-UTRAN
Unit: None
cell.

Use this command to

modify the configuration
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later of an external E-UTRAN
LTE) Unit: None
cell.

Use this command to

eNodeB(TDD modify the configuration Value Range: 0~503
eRAN 12.1 and later
LTE) of an external E-UTRAN Unit: None
cell.

Use this command to

eNodeB(TDD modify the neighboring GUI Value Range: 0~255
eRAN 12.1 and later
LTE) relation with a UTRAN Unit: None
cell.

Use this command to

GUI Value Range: 3
eNodeB(TDD modify the neighboring
eRAN 12.1 and later characters
LTE) relation with a UTRAN
Unit: None
cell.
 Use this command to
GUI Value Range: 2~3
eNodeB(TDD modify the neighboring
eRAN 12.1 and later characters
LTE) relation with a UTRAN
Unit: None
cell.

Use this command to

eNodeB(TDD modify the neighboring GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) relation with a UTRAN Unit: None
cell.

Use this command to

eNodeB(TDD modify the neighboring GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) relation with a UTRAN Unit: None
cell.

Use this command to

remove one or more
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later neighbor relationships
LTE) Unit: None
with intra-frequency E-
UTRAN cells.

Use this command to

remove one or more GUI Value Range: 3
eNodeB(TDD
eRAN 12.1 and later neighbor relationships characters
LTE)
with intra-frequency E- Unit: None
UTRAN cells.

Use this command to

remove one or more GUI Value Range: 2~3
eNodeB(TDD
eRAN 12.1 and later neighbor relationships characters
LTE)
with intra-frequency E- Unit: None
UTRAN cells.

Use this command to

remove one or more GUI Value Range:
eNodeB(TDD
eRAN 12.1 and later neighbor relationships 0~1048575
LTE)
with intra-frequency E- Unit: None
UTRAN cells.

Use this command to

remove one or more
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later neighbor relationships
LTE) Unit: None
with intra-frequency E-
UTRAN cells.
 Use this command to
remove one or more
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later neighbor relationships
LTE) Unit: None
with inter-frequency E-
UTRAN cells.

Use this command to

remove one or more GUI Value Range: 3
eNodeB(TDD
eRAN 12.1 and later neighbor relationships characters
LTE)
with inter-frequency E- Unit: None
UTRAN cells.
Use this command to
remove one or more GUI Value Range: 2~3
eNodeB(TDD
eRAN 12.1 and later neighbor relationships characters
LTE)
with inter-frequency E- Unit: None
UTRAN cells.
Use this command to
remove one or more GUI Value Range:
eNodeB(TDD
eRAN 12.1 and later neighbor relationships 0~1048575
LTE)
with inter-frequency E- Unit: None
UTRAN cells.

Use this command to

remove one or more
eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later neighbor relationships
LTE) Unit: None
with inter-frequency E-
UTRAN cells.

Use this command to GUI Value Range: 3

eNodeB(TDD
eRAN 12.1 and later remove one or more characters
LTE)
external E-UTRAN cells. Unit: None

Use this command to GUI Value Range: 2~3

eNodeB(TDD
eRAN 12.1 and later remove one or more characters
LTE)
external E-UTRAN cells. Unit: None

Use this command to GUI Value Range:

eNodeB(TDD
eRAN 12.1 and later remove one or more 0~1048575
LTE)
external E-UTRAN cells. Unit: None

Use this command to

eNodeB(TDD GUI Value Range: 0~255
eRAN 12.1 and later remove one or more
LTE) Unit: None
external E-UTRAN cells.
 Use this command to
eNodeB(TDD Value Range: 0~503
eRAN 12.1 and later remove one or more
LTE) Unit: None
external E-UTRAN cells.

Use this command to

eNodeB(TDD remove one or more GUI Value Range: 0~255
eRAN 12.1 and later
LTE) neighbor relationships Unit: None
with UTRAN cells.

Use this command to

GUI Value Range: 3
eNodeB(TDD remove one or more
eRAN 12.1 and later characters
LTE) neighbor relationships
Unit: None
with UTRAN cells.

Use this command to

GUI Value Range: 2~3
eNodeB(TDD remove one or more
eRAN 12.1 and later characters
LTE) neighbor relationships
Unit: None
with UTRAN cells.

Use this command to

eNodeB(TDD remove one or more GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) neighbor relationships Unit: None
with UTRAN cells.

Use this command to

eNodeB(TDD remove one or more GUI Value Range: 0~65535
eRAN 12.1 and later
LTE) neighbor relationships Unit: None
with UTRAN cells.
 Parameter Value Type

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
Range-value parameters:
on the MAE client include the
or on NEs.
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
Range-value parameters:
on the MAE client include the
or on NEs.
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client
Range-value or on NEs.
parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client
Range-value or on NEs.
parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
 Parameter
Optimization Type MML Command Parameter
Description

SFN HetNet Smart Indicates the function

DSP LICINFO FUNCTIONTYPE
Cluster Organization type.

Indicates the number

SFN HetNet Smart
DSP BRDMFRINFO CN of the cabinet where
Cluster Organization
the board is located.

SFN HetNet Smart Indicates the subrack

DSP BRDMFRINFO SRN
Cluster Organization number of the board.

SFN HetNet Smart Indicates the slot

DSP BRDMFRINFO SN
Cluster Organization number of the board.

SFN HetNet Smart Indicates the local ID

DEA CELL LocalCellId
Cluster Organization of the cell.

SFN HetNet Smart RMV Indicates the local cell

LocalCellId
Cluster Organization EUCELLSECTOREQM ID.

Indicates the ID of a
SFN HetNet Smart RMV piece of sector
SectorEqmId
Cluster Organization EUCELLSECTOREQM equipment that serves
a cell.

Indicates the local cell

SFN HetNet Smart ADD identity. It uniquely
LocalCellId
Cluster Organization EUCELLSECTOREQM identifies a cell within
an eNodeB.

Indicates the ID of the

sector device that
SFN HetNet Smart ADD serves the cell,it
SectorEqmId
Cluster Organization EUCELLSECTOREQM uniquely identifies a
sector device within
an eNodeB.
 Indicates the
SFN HetNet Smart ADD reference signal
ReferenceSignalPwr
Cluster Organization EUCELLSECTOREQM power of the cell
sector device.

Indicates the ID of the

SFN HetNet Smart ADD
BaseBandEqmId baseband equipment
Cluster Organization EUCELLSECTOREQM
serving a cell.

Indicates whether to
SFN HetNet Smart enable or disable the
MOD CELL MultiRruCellFlag
Cluster Organization multi-RRU cell
feature.

SFN HetNet Smart Indicates the type of

MOD CELL MultiRruCellMode
Cluster Organization the multi-RRU cell.

Indicates the number

SFN HetNet Smart of physical cells
MOD CELL SectorEqmNum
Cluster Organization consisting an SFN
cell.

Indicates the
SFN HetNet Smart transmission and
MOD CELL TxRxMode
Cluster Organization reception mode of the
cell.

SFN HetNet Smart Indicates the physical

MOD CELL PhyCellId
Cluster Organization cell ID.
 Indicates the cell
capacity mode, which
SFN HetNet Smart is used to set the
MOD CELLRACTHD CellCapacityMode
Cluster Organization maximum number of
UEs that can access a
single cell.

Indicates whether to
configure sounding
SFN HetNet Smart
MOD SRSCFG SrsCfgInd reference signal
Cluster Organization
(SRS) resources for
UEs in a cell.

Indicates the cell

reference signal
power of each
SFN HetNet Smart
MOD PDSCHCFG ReferenceSignalPwr physical antenna (the
Cluster Organization
precision of
converting dBm to
mW is 0.01 mW).

Indicates the local ID

SFN HetNet Smart of the cell. It uniquely
ACT CELL LocalCellId
Cluster Organization identifies a cell within
a BS.

Indicates the SFN

SFN HetNet Smart
MOD CellAlgoSwitch SfnUlSchSwitch uplink scheduling
Cluster Organization
mode.

Indicates the SFN

SFN HetNet Smart
MOD CellAlgoSwitch SfnDlSchSwitch downlink scheduling
Cluster Organization
mode.

Indicates the PRB

usage threshold used
SFN HetNet Smart MOD to determine the
SfnDlLowLoadThd
Cluster Organization CELLDLSCHALGO change from high load
to low load in the
downlink.

Indicates the cell ID of

MOD
SFN HetNet Smart the local cell. It
EUTRANINTRAFREQ LocalCellId
Cluster Organization uniquely identifies a
NCELL
cell within an eNodeB.
 Indicates the mobile
MOD
SFN HetNet Smart country code of the E-
EUTRANINTRAFREQ Mcc
Cluster Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

MOD
SFN HetNet Smart network code of the
EUTRANINTRAFREQ Mnc
Cluster Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the intra-
MOD
SFN HetNet Smart frequency neighboring
EUTRANINTRAFREQ eNodeBId
Cluster Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.

Indicates the ID of the

MOD intra-frequency
SFN HetNet Smart
EUTRANINTRAFREQ CellId neighboring cell. It
Cluster Organization
NCELL uniquely identifies a
cell within an eNodeB.

MOD
SFN HetNet Smart Indicates the cell ID of
EUTRANINTERFREQ LocalCellId
Cluster Organization the local cell.
NCELL

Indicates the mobile

MOD
SFN HetNet Smart country code of the E-
EUTRANINTERFREQ Mcc
Cluster Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

MOD
SFN HetNet Smart network code of the
EUTRANINTERFREQ Mnc
Cluster Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

MOD
SFN HetNet Smart ID of the inter-
EUTRANINTERFREQ eNodeBId
Cluster Organization frequency neighboring
NCELL
cell.

MOD Indicates the local ID

SFN HetNet Smart
EUTRANINTERFREQ CellId of the inter-frequency
Cluster Organization
NCELL neighboring cell.
 Indicates the mobile
MOD
SFN HetNet Smart country code of the
EUTRANEXTERNALC MCC
Cluster Organization external E-UTRAN
ELL
cell.

Indicates the mobile

MOD
SFN HetNet Smart network code of the
EUTRANEXTERNALC MNC
Cluster Organization external E-UTRAN
ELL
cell.

MOD Indicates the eNodeB

SFN HetNet Smart
EUTRANEXTERNALC ENODEBID ID of the external E-
Cluster Organization
ELL UTRAN cell.

MOD Indicates the cell ID of

SFN HetNet Smart
EUTRANEXTERNALC CELLID the external E-UTRAN
Cluster Organization
ELL cell.

Indicates the physical

MOD
SFN HetNet Smart cell identifier (PCI) of
EUTRANEXTERNALC PHYCELLID
Cluster Organization the external E-UTRAN
ELL
cell.

Indicates the cell ID of

RMV
SFN HetNet Smart the local cell. It
EUTRANINTRAFREQ LocalCellId
Cluster Organization uniquely identifies a
NCELL
cell within an eNodeB.

Indicates the mobile

RMV
SFN HetNet Smart country code of the E-
EUTRANINTRAFREQ Mcc
Cluster Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

RMV
SFN HetNet Smart network code of the
EUTRANINTRAFREQ Mnc
Cluster Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the intra-
RMV
SFN HetNet Smart frequency neighboring
EUTRANINTRAFREQ eNodeBId
Cluster Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.
 Indicates the ID of the
RMV intra-frequency
SFN HetNet Smart
EUTRANINTRAFREQ CellId neighboring cell. It
Cluster Organization
NCELL uniquely identifies a
cell within an eNodeB.

Indicates the cell ID of

RMV
SFN HetNet Smart the local cell. It
EUTRANINTERFREQ LocalCellId
Cluster Organization uniquely identifies a
NCELL
cell within an eNodeB.

Indicates the mobile

RMV
SFN HetNet Smart country code of the E-
EUTRANINTERFREQ Mcc
Cluster Organization UTRAN neighboring
NCELL
cell.

Indicates the mobile

RMV
SFN HetNet Smart network code of the
EUTRANINTERFREQ Mnc
Cluster Organization E-UTRAN neighboring
NCELL
cell.

Indicates the eNodeB

ID of the inter-
RMV
SFN HetNet Smart frequency neighboring
EUTRANINTERFREQ eNodeBId
Cluster Organization cell. It uniquely
NCELL
identifies an eNodeB
within a PLMN.

Indicates the ID of the

RMV inter-frequency
SFN HetNet Smart
EUTRANINTERFREQ CellId neighboring cell. It
Cluster Organization
NCELL uniquely identifies a
cell within an eNodeB.

Indicates the mobile

RMV
SFN HetNet Smart country code of the
EUTRANEXTERNALC MCC
Cluster Organization external E-UTRAN
ELL
cell.

Indicates the mobile

RMV
SFN HetNet Smart network code of the
EUTRANEXTERNALC MNC
Cluster Organization external E-UTRAN
ELL
cell.

RMV Indicates the eNodeB

SFN HetNet Smart
EUTRANEXTERNALC ENODEBID ID of the external E-
Cluster Organization
ELL UTRAN cell.
 RMV Indicates the cell ID of
SFN HetNet Smart
EUTRANEXTERNALC CELLID the external E-UTRAN
Cluster Organization
ELL cell.

Indicates the physical

RMV
SFN HetNet Smart cell identifier (PCI) of
EUTRANEXTERNALC PHYCELLID
Cluster Organization the external E-UTRAN
ELL
cell.
 MAE Value Range and
NE Version Operation Description
Unit

Use this command to

GUI Value Range: eNodeB
eNodeB(FDD LTE) eRAN 12.1 and later query the license sale
Unit: None
information.

Use this command to

query the manufacturing GUI Value Range: eNodeB
eNodeB(FDD LTE) eRAN 12.1 and later
information about a Unit: None
board.

Use this command to GUI Value Range: 0~1,

query the manufacturing 4~5, 7~8, 11~12, 14~15,
eNodeB(FDD LTE) eRAN 12.1 and later
information about a 40~254
board. Unit: None

Use this command to

GUI Value Range: 0~8, 16,
query the manufacturing
eNodeB(FDD LTE) eRAN 12.1 and later 18~19, 255
information about a
Unit: None
board.

Use this command to

modify this parameter
after physical cells are GUI Value Range: 0~255
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
after physical cells are GUI Value Range: 0~255
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
after physical cells are GUI Value Range: 0~65535
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to

modify this parameter
GUI Value Range: 0~255
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are
Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter
GUI Value Range: 0~65535
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are
Unit: None
combined into an SFN
cell in such scenarios.
 Use this command to
modify this parameter GUI Value Range:-
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are 600~500,32767
combined into an SFN Unit: 0.1dBm
cell in such scenarios.

Use this command to

modify this parameter
GUI Value Range:0~23,255
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are
Unit: None
combined into an SFN
cell in such scenarios.

Use this command to

modify this parameter GUI Value Range:
after physical cells are BOOLEAN_FALSE,
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into BOOLEAN_TRUE
an SFN cell in such Unit: None
scenarios.

GUI Value Range:

SFN(SFN),
CELL_COMBINATION(Cell
Use this command to Combination),
modify this parameter TWO_RRU_COMBINATIO
after physical cells are N(TWO RRU Combination),
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into DIGITAL_COMBINATION(
an SFN cell in such Cell Digital Combination),
scenarios. MPRU_AGGREGATION(M
PRU_AGGREGATION)
Unit: None

Use this command to

modify this parameter GUI Value Range: 2~7
after physical cells are
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.

Use this command to GUI Value Range: 1T1R,

modify this parameter 1T2R, 2T2R, 2T4R, 4T4R,
after physical cells are 8T8R, 2T8R, 4T8R,
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into 64T64R, 32T32R
an SFN cell in such Unit: None
scenarios.

Use this command to

modify this parameter
after physical cells are GUI Value Range: 0~503
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.
 GUI Value Range:
SMALLCAPACITY(SMALL
Use this command to CAPACITY),
modify this parameter NORMALCAPACITY(NOR
after physical cells are MALCAPACITY),
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into LARGECAPACITY(LARGE
an SFN cell in such CAPACITY)
scenarios.
Unit: None

Use this command to GUI Value Range:

modify this parameter BOOLEAN_FALSE(False),
after physical cells are BOOLEAN_TRUE(True)
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into
an SFN cell in such Unit: None
scenarios.

Use this command to

GUI Value Range: -
modify this parameter
600~500
after physical cells are
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into
Unit: 0.1dBm
an SFN cell in such
scenarios.

Use this command to

modify this parameter GUI Value Range: 0~255
after physical cells are
eNodeB(FDD LTE) eRAN 12.1 and later
splitted or combined into Unit: None
an SFN cell in such
scenarios.

GUI Value Range:

Use this command to ADAPTIVE(Adaptive
modify this parameter scheduling), JOINT(Joint
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are scheduling)
combined into an SFN
cell in such scenarios. Unit: None

GUI Value Range:

Use this command to ADAPTIVE(Adaptive
modify this parameter scheduling), JOINT(Joint
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are scheduling)
combined into an SFN
cell in such scenarios. Unit: None

Use this command to

GUI Value Range: 0~100
modify this parameter
eNodeB(FDD LTE) eRAN 12.1 and later after physical cells are
Unit: %
combined into an SFN
cell in such scenarios.

Use this command to

GUI Value Range: 0~255
modify the neighboring
eNodeB(FDD LTE) eRAN 12.1 and later relation with an intra-
Unit: None
frequency E-UTRAN
cell.
 Use this command to GUI Value Range: 3
modify the neighboring characters
eNodeB(FDD LTE) eRAN 12.1 and later relation with an intra-
frequency E-UTRAN Unit: None
cell.

Use this command to GUI Value Range: 2~3

modify the neighboring characters
eNodeB(FDD LTE) eRAN 12.1 and later relation with an intra-
frequency E-UTRAN Unit: None
cell.

Use this command to GUI Value Range:

modify the neighboring 0~1048575
eNodeB(FDD LTE) eRAN 12.1 and later relation with an intra-
frequency E-UTRAN Unit: None
cell.

Use this command to

GUI Value Range: 0~255
modify the neighboring
eNodeB(FDD LTE) eRAN 12.1 and later relation with an intra-
Unit: None
frequency E-UTRAN
cell.

Use this command to

modify the neighboring GUI Value Range: 0~255
relation with an inter-
eNodeB(FDD LTE) eRAN 12.1 and later
frequency E-UTRAN Unit: None
cell.

Use this command to

GUI Value Range: 3
modify the neighboring
characters
relation with an inter-
eNodeB(FDD LTE) eRAN 12.1 and later
frequency E-UTRAN
Unit: None
cell.

Use this command to

GUI Value Range: 2~3
modify the neighboring
characters
relation with an inter-
eNodeB(FDD LTE) eRAN 12.1 and later
frequency E-UTRAN
Unit: None
cell.

Use this command to

GUI Value Range:
modify the neighboring
0~1048575
relation with an inter-
eNodeB(FDD LTE) eRAN 12.1 and later
frequency E-UTRAN
Unit: None
cell.

Use this command to

modify the neighboring GUI Value Range: 0~255
relation with an inter-
eNodeB(FDD LTE) eRAN 12.1 and later
frequency E-UTRAN Unit: None
cell.
 GUI Value Range: 3
Use this command to
characters
modify the configuration
eNodeB(FDD LTE) eRAN 12.1 and later
of an external E-UTRAN
Unit: None
cell.

Use this command to GUI Value Range: 2~3

modify the configuration characters
eNodeB(FDD LTE) eRAN 12.1 and later of an external E-UTRAN
cell. Unit: None

GUI Value Range:

Use this command to
0~1048575
modify the configuration
eNodeB(FDD LTE) eRAN 12.1 and later
of an external E-UTRAN
Unit: None
cell.

Use this command to

GUI Value Range: 0~255
modify the configuration
eNodeB(FDD LTE) eRAN 12.1 and later of an external E-UTRAN
Unit: None
cell.

Use this command to GUI Value Range: 0~503

modify the configuration
eNodeB(FDD LTE) eRAN 12.1 and later
of an external E-UTRAN Unit: None
cell.

Use this command to

GUI Value Range: 0~255
remove one or more
eNodeB(FDD LTE) eRAN 12.1 and later neighbor relationships
Unit: None
with intra-frequency E-
UTRAN cells.

Use this command to GUI Value Range: 3

remove one or more characters
eNodeB(FDD LTE) eRAN 12.1 and later neighbor relationships
with intra-frequency E- Unit: None
UTRAN cells.

Use this command to GUI Value Range: 2~3

remove one or more characters
eNodeB(FDD LTE) eRAN 12.1 and later neighbor relationships
with intra-frequency E- Unit: None
UTRAN cells.

Use this command to GUI Value Range:

remove one or more 0~1048575
eNodeB(FDD LTE) eRAN 12.1 and later neighbor relationships
with intra-frequency E- Unit: None
UTRAN cells.
 Use this command to
GUI Value Range: 0~255
remove one or more
eNodeB(FDD LTE) eRAN 12.1 and later neighbor relationships
Unit: None
with intra-frequency E-
UTRAN cells.

Use this command to

remove one or more GUI Value Range: 0~255
neighbor relationships
eNodeB(FDD LTE) eRAN 12.1 and later
with inter-frequency E- Unit: None
UTRAN cells.

Use this command to

GUI Value Range: 3
remove one or more
characters
neighbor relationships
eNodeB(FDD LTE) eRAN 12.1 and later
with inter-frequency E-
Unit: None
UTRAN cells.

Use this command to

GUI Value Range: 2~3
remove one or more
characters
neighbor relationships
eNodeB(FDD LTE) eRAN 12.1 and later
with inter-frequency E-
Unit: None
UTRAN cells.

Use this command to

GUI Value Range:
remove one or more
0~1048575
neighbor relationships
eNodeB(FDD LTE) eRAN 12.1 and later
with inter-frequency E-
Unit: None
UTRAN cells.

Use this command to

remove one or more GUI Value Range: 0~255
neighbor relationships
eNodeB(FDD LTE) eRAN 12.1 and later
with inter-frequency E- Unit: None
UTRAN cells.

GUI Value Range: 3

Use this command to characters
eNodeB(FDD LTE) eRAN 12.1 and later remove one or more
external E-UTRAN cells. Unit: None

GUI Value Range: 2~3

Use this command to characters
eNodeB(FDD LTE) eRAN 12.1 and later remove one or more
external E-UTRAN cells. Unit: None

GUI Value Range:

Use this command to 0~1048575
eNodeB(FDD LTE) eRAN 12.1 and later remove one or more
external E-UTRAN cells. Unit: None
 GUI Value Range: 0~255
Use this command to
eNodeB(FDD LTE) eRAN 12.1 and later remove one or more
Unit: None
external E-UTRAN cells.

Use this command to GUI Value Range: 0~503

eNodeB(FDD LTE) eRAN 12.1 and later remove one or more
external E-UTRAN cells. Unit: None
 Parameter Value Type

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Identity-related parameters: include

parameters such as CellId, IDTYPE,
MCC, and the MOC primary key and
foreign key parameters. The MAE
does not optimize the values of these
parameters.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.

Range-value parameters: include the

parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.
Range-value parameters: include the
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
Range-value parameters:
on the MAE client include the
or on NEs.
parameters for which the MAE
calculates optimization values
according to algorithm requirements
and the value range of each parameter
on the MAE client or on NEs.