https://www.china-oyea.

com/
Summa F Series Brochure

No other machine can match the versatility and adaptability of the Summa F Series. Its heavy duty
construction, accuracy and multi-functional head allows you to install up to three tools simultaneously
from a wide range of options, making countless applications possible. Since the tools and modules can be
added at any time, upgrades are easy and cost-effective.

TANGENTIAL MODULE
The powerful Tangential Module offers a vertical force of 10 kg and a horizontal force of
20 kg and corresponds to a wide range of matching tools. Each of the many and varied
tools has a barcode ID, which ensures automatic recognition and parameter settings. Also,
multiple Tangential Modules can be added into the multi-functional head to allow multiple
jobs to be assigned to a single machine, such as creasing and cutting,
without having to remove modules.

1 Kiss-Cut Tool
With mechanically-controlled knife
pressure, this tool is specifically
1 2 3
390-534 - Tangential Knife 36o
Max cutting thickness - 0.25 mm

390-550 - Tangential Knife 60 o

designed for kiss-cutting material Max cutting thickness - 1.2 mm
4 5
down to its liner up to 1.2 mm thick. 390-551 - Tangential Double Tip Knife 36o
1. Paper < 200 gr
This tool also includes an adjustable 2. Adhesive vinyl / Max cutting thickness - 0.25 mm
Sandblast material
nose piece for precise depth control. 3. Window film
4. Magnetic material 390-560 - Tangential Knife 45 o wedge
40/25°
5. Adhesive PVC banner vinyl Max cutting thickness - 1 mm

2
Single Edge Cutout Tool
The Single Edge Cutout Tool is
designed for detailed cutting through 1 2 3
500-9801 - Single Edge Cutout Knife 65o
Max cutting thickness (with gliding disk) - 6 mm
material up to 6 mm thick. Max cutting thickness (without gliding disk) - 6 mm

A spring-loaded gliding disk allows

cutting of very precise details and can 4 5 6
be fixed at a set depth.
7 8
1. Paper < 200 gr 5. Polypropelene 7. Adhesive PVC
2. Cardboard 300-500 gr <= 1.2 mm banner vinyl
3. Adhesive vinyl 6. Polycarbonate 8. Magnetic material
4. Hard foamboard <= 0.6 mm
<= 2 mm

3 Double Edge Cutout Tool

The Double Edge Cutout Tool ensures
minimal wear when cutting through
1 2 3 500-9802 - Double Edge Cutout Knife 50°
Max cutting thickness (with gliding disk) - 3 mm
Max cutting thickness (without gliding disk) - 3 mm

rigid material up to 5 mm thick. 6

4 5
Again, a spring-loaded gliding disk 500-9803 - Double Edge Cutout Knife 60o
allows cutting of very precise details 8 9
Max cutting thickness (with gliding disk) - 5 mm
Max cutting thickness (without gliding disk) - 5 mm
and can be fixed at a set depth. 7
1. Paper < 200 gr 5. Reflective sheeting 8. Polycarbonate
2. Cardboard 300-500 gr 6. Hard foamboard <= 0.6 mm
3. Adhesive vinyl <= 1.2 mm 9. Magnetic material
4. Adhesive PVC 7. Polypropelene
banner vinyl <= 1.2 mm

4
Heavy Duty Cutout Tool
The Heavy Duty Cutout Tool is 1 2 3 500-9807 - Heavy Duty Cutout Knife 45° - 90 °
Max cutting thickness - 15 mm
suitable for cutting through thicker
material up to 15 mm thick. 4 5 6

7 8
9
1. Cardboard 300 -5 00 gr 4. Corrugated plastic 7. Polycarbonate
2. Adhesive vinyl <= 5 mm <= 0.6 mm
3. Adhesive PVC 5. Hard foamboard 8. Foamboard with paper
banner vinyl <= 1.2 mm <= 5 mm
 https://www.china-oyea.com/

5
Creasing Tools
Several Creasing Wheels, designed
in different depths and radius sizes,
are available for creasing and scoring
1 2 3 4 5
paper, cartons, polypropylene and 1. 500-9325 3. 500-9327 5. 500-9329
Creasing Tool D25 R3 W8 Creasing Tool D25 R0.75 W1.5 Creasing Tool D15 R0.17
PVC material. corrugated C-B-C Flute (4-7 mm) corrugated E-B Flute (1.5-3 mm) W0.35 - 1pt
2. 500-9326 4. 500-9328 polypropelene sheets <= 1.2 mm
Creasing Tool D25 R1.5 W8 Creasing Tool D15 R0.35
corrugated B-C Flute (3-4 mm) W0.7 - 2pt
cardboard 300 - 500 gr m2 /
corrugated E Flute (1.5 mm)

6
V-Cut Tools
The V-Cut Tools are available in 5
angles and are designed to cut a
V-shaped groove in rigid sandwich
500-9340 500-9341 500-9342 500-9343 500-9344
and foam composite boards up to V-Cut 0 o V-Cut 15o V-Cut 22.5 o V-Cut 30 o V-Cut 45 o

27 mm thick, depending on the

material’sdensity.

1 2

3 4
500-9826 - V-Cut Hard Metal
1. Honeycomb board Max cutting thickness 18-27 mm
2. Re-board®
3. Foamboard with paper <= 5 mm
4. Foamboard with paper > 5 mm

Electronic Oscillating Tool

Ideal for cutting soft and medium 1 2 3
density materials such as corrugated
board and foam
up to 18 mm thick. 4 5
The Electronic Oscillating Tool 1.
2.
Corrugated B-C-E Flute (1.5-4 mm)
Foamboard with paper <= 10 mm
is driven by an electric motor, 3. Foamboard with paper > 5 mm
producing up to 12,000 rpm and 4. Honeycomb board < 10 mm
5. Gasket
moves a knife up and down over 500-9811 - EOT L25 Knife 65o - 85o
Max cutting thickness (with gliding disk) - 5 mm
a stroke of 1 mm. Max cutting thickness (without gliding disk) - 11 mm

500-9815 -EOT L33 Knife 45o - 85o 500-9813 - EOT L25 Knife 0o - 75o
Max cutting thickness (with gliding disk) - 13 mm Max cutting thickness (with gliding disk) - 5 mm
Max cutting thickness (without gliding disk) - 19 mm Max cutting thickness (without gliding disk) - 6 mm

500-9814 -EOT L38 Knife 45o - 86o 500-9812 - EOT L28 Knife 65o - 85o
Max cutting thickness (with gliding disk) - 18 mm Max cutting thickness (with gliding disk) - 8 mm
Max cutting thickness (without gliding disk) - 24 mm Max cutting thickness (without gliding disk) - 14 mm

8
Pneumatic Oscillating Tool
Blades
Ideal for cutting

The Pneumatic Oscillating Tool, 1 2 3

powered by compressed air,
moves a knife up and down over
4 5 6
a stroke of 8 mm.
The robust construction of the
tool makes it suitable to cut thick
7 8
material, such as honeycomb board, 1. Triple walled cardboard
corrugated board and foam board. 2. Double walled cardboard Max cutting thickness - 18mm
3. Packaging Foam
4. Honeycomb board >= 10 mm
5. Foamboard with paper > 5 mm
6. Re-board® 500-9833 - POT Knife Serrated L27 T1.0
7. Foamboard with plastic Max cutting thickness - 25mm
8. Rubber

500-9834 - POT Knife Point L20 T1.0*

Max cutting thickness - 16mm
*E xt ra pro tect i ve mat re c o m m e n d e d

5
 https://www.china-oyea.com/

DRAG MODULE
The Drag Module makes notations with pens or kiss-cuts a wide range of
material with a pressure of 600 grams of downforce, using a drag knife.

Identical to the Tangential Module, multiple Drag Modules can be added into the
multi-functional head to allow both kiss cutting and drawing without the need to
remove modules.

1 Drag Knife Tool

The Drag Knife Tool is specifically
designed for fast kiss-cutting a wide
1 2
1. Paper < 200 gsm
3
391-231 - Drag Knife - 60o
Max cutting thickness - 0.6 mm

391-358 - Drag Knife - 55o

range of material. 2. Adhesive vinyl Max cutting thickness - 0.8 mm
3. Adhesive PVC banner vinyl

391-360 - Standard Knife 36o

With 600 g of force, this tool is ideal Max cutting thickness - 0.25 mm
for cutting through a wide range of
adhesive vinyls.

2
Pen Tool & Universal
Pen Holder Tool 1 2 3 MP06BK - Fibre Tip Pen - Black
Attached to the Drag Module, this 1. Paper < 200 gsm
fast and accurate tool allows precise 2. Adhesive vinyl
3. Adhesive PVC banner vinyl
drawing on a range of materials,
using either our own brand of fiber 395-430/395-431 Roller Ball Pen
Black / Blue
tip pens or a variety of third-party
Pen holder

pencils and pens in a multitude

of sizes and diameters, using the
Universal Pen Holder Tool.
Universal Pen Holder Universal Pen Holder
/ Black / Copper
accepts pen/pencils accepts pen/pencils from
from 6.5 mm 9.5 mm
to 10 mm in diameter to 11 mm in diameter

ROTARY MODULE
The Rotary Module on the Summa F Series is driven by an
electronic motor and is capable of handling all kinds of
thin materials with a main focus on textiles.

In general,the vacuum table has less grip on textiles.

However, the Rotary Knife produces minimal horizontal
forces, ensuring the material stays in place.

The module allocates slots 2 and 3 of the head, similar

to the Routing tool. Slot 1 remains free for another tool.
The module can be dismounted easily, making two slots
available again to mount other tools, if necessary.
Initial installation requires no assembling or wiring.

The module is compatible with all existing

F Series installations.

1. Fleece
2. Felt
3. Packaging Foam
1 2 3 4. Foam <= 5 mm
5. Synthetic Textiles
6. Technical Textiles

500 - 9860 Decagonal Knife D25 500 - 9861 Decagonal Knife D28 500 - 9862 Decagonal Knife D32
4 5 6
Max cutting thickness - 1.5 mm Max cutting thickness - 3 mm Max cutting thickness - 5 mm

6
 https://www.china-oyea.com/

ROUTING MODULE
Standard Router
The Standard Routing Module on the Summa F Series has a 1
kW motor, capable of handling most solid boards in the graphic
and sign industry. Hard foam PVC, acrylic and aluminum
covered foam boards as well as other materials, such as wood
and MDF can be processed.

HF Router (High Frequency Router) STANDARD ROUTING MODULE

The HF Routing Module is equipped with a high-frequency

spindle and a higher power output, which allow higher
processing speeds. The utmost balanced, high-frequency
spindle provides for a much smoother finishing of rigid
substrates. The bit is pneumatically controlled and can be
replaced manually in a fast and simple way. This maximizes
productivity of the cutter when processing, for instance,
acrylics, wood and plastics.

The Routing Modules for the F Series allocate slots 2 and 3 of

the head. Slot 1 remains free for another tool. Of course, the
modules can be easily attached to the mounting pole when
not in use, making the two slots available again for other
modules and tools. The modules are compatible with existing
installations with a 3-phase power connection. SummaFlex Pro HF ROUTING MODULE

can drive the modules without the need to purchase any

additional software upgrades.
Routing bits

50 0 -9 8 5 0 - Routing Bit D3/ 3 L6 0 /1 0 1 Fl UC 50 0 - 98 5 2 - Routing Bit D4/ 4 L5 0 /1 2 1 Fl UC

50 0 - 9 8 5 4 - HF Routing Bit D6/ 3 L5 0 / 0 6 MP 1 Fl UC 50 0 - 9 8 5 7 - HF Routing Bit D6/6 L5 0 / 1 2 MP 1 Fl UC BAL

50 0 -9 8 5 6 - HF Routing Bit D6/4 L5 0 /1 2 MP 1 Fl UC 50 0 - 9 8 5 8 - HF Routing Bit D6/6 L5 8 / 2 2 MP 1 Fl UC BAL

1. Corrugated plastic
Ideal for routing

2. Hard foamboard
3. Polycarbonate
1 2 3 4 4. Foamboard with aluminium
5. MDF
6. Foamboard with plastic
7. Plexi

5 6 7

Both Routing Modules come with a vacuum cleaning kit to

remove unwanted chips and dust. The kit includes a brush
assembly, host and mounting pole (gantry). The vacuum
GANTRY
cleaner is an optional accessory.

AUTOMATED DEPTH CONTROL / ADC

The Automated Depth Control (ADC) simplifies tool, knife or bit
changes significantly. The ADC measures the tip of the knife
or bit accurately and sets the down position of the tool to the
level of the table.
When starting up the unit or after a tool change, all installed
tools are measured to detect changes and avoid operator
errors. The measurement only takes a few seconds and
provides for a swift tool change. On all tangential controlled
tools, the ADC can also detect the tangential calibration values
(Origin, Lat and Long). This ensures the best settings can
always be used to get the most optimal cut quality.

7
 https://www.china-oyea.com/
TOOL APPLICATION
OVERVIEW TABLE

Recommended

Alternative

Double Edge
Single Edge
Kiss Cut +

Kiss Cut +
390-560

390-550
standard

knife

knife
knife
CARDBOARD MATERIALS

Paper < 200 gsm

Cardboard 300-500 gsm
Corrugated B flute (3 mm)
Corrugated C flute (4 mm)
Corrugated BC flute (7 mm)
Corrugated E flute (1.5 mm)
Honeycomb board < 10 mm
Honeycomb board >= 10 mm
Re-board® 10 mm
Re-board® >= 10 mm

ROLL MATERIALS

Adhesive vinyl
Adhesive PVC banner vinyl
Banner Vinyl
Sandblast material
Reflective sheeting
Window film

SYNTHETIC MATERIALS

Corrugated plastic <= 5 mm

Corrugated plastic > 5 mm
Hard foamboard <= 2 mm
Hard foamboard > 2 mm
Polypropylene sheets <= 1.2 mm
Polycarbonate <= 0.6 mm
Polycarbonate > 1 mm
Plexi

FOAMBOARD

Foamboard with paper <= 5 mm

Foamboard with paper > 5 mm
Foamboard with plastic
Foamboard with aluminium

WOOD

MDF

SPECIAL MATERIALS

Magnetic
Varnish blankets
Gasket
Foam
Textiles (Coated-Uncoated)
Rubber
https://www.china-oyea.com/
 https://www.china-oyea.com/
MEDIA HANDLING HAS NEVER BEEN EASIER

VACUUM TABLE
Vacuum Pump / F1612
The Vacuum Pump with sound absorber holds the material in
place during the job while the Selector adjusts the vacuum
automatically to match the working area.

Zones / F1330, F1832, F2630

The working area of the F2630,the F1330 and the F1832
can be divided into different zones, so the vacuum can be
optimized to process smaller jobs, as well.

The F2630 can be divided into12 zones, the F1832 can

be divided into 8 zones and the F1330 can be divided
into 6 zones. Each zone can be activated and deactivated
automatically.

MEDIA TRANSPORT
Conveyor System & Roll Support System
Media Advance Clamps In combination with the Conveyor
The Conveyor System allow you System and the Media Advanced
to cut, crease and annotate large Clamps, the Roll Support System
lengths of (flexible) material is ideal for processing roll material
to large production runs. on all the Summa Flatbed Systems.
Pneumatically-driven media The Roll Support System of the
advance clamps hold the material F2630 consists of two parts, so
down while pulling it forward to two smaller rolls can be loaded
work continuously in panels or next to each other to maximize the
multiple jobs. workload of the machine.

TANDEM MODE / F1330, F1832, F2630

By using the front zones and rear zones alternately, the Tandem Mode leads to
Zone 1 significant increases in productivity.
With the Tandem Mode, the active working area on the flatbed can be divided
into front and back processing areas, which enables the user to load and unload
material on one end of the table while cutting material on the other end of the
Zone 2 table. This will avoid idle periods during the processing of material, which will add
significant value to the overall workflow.

o Video available on www.summa.eu/video/tandem-mode

OPERATOR ZONE
With this new feature the F Series’working area can be divided into two　
separate zones, a cut only zone and an Operator Zone. The included
Conveyor System makes sure all cut material, processed in the cut zone,
is fed forward to the operator zone automatically. As the cutting head
doesn't move any further than the cut only zone, the operator can then　
attend to the processed material safely at the front of the machine (the　
operator zone). Operator Zone
The Operator Zone is especially developed to optimize your workflow
in one swift motion. Because of its user-friendliness everyone can use
this included feature in order to boost their productivity and save lots of　
precious time!
e

10
 https://www.china-oyea.com/
POSTER TRIM
A new feature, called Poster Trim, ensures posters can be cut without
the need of any cutting information. The built-in camera system of the
F Series will detect the edges of black printed frames automatically and
will start to cut immediately, without operator intervention.

The Poster Trim functionality is the ideal way to make sure your posters
are cut rapidly and accurately with a minimum of manual actions.

o Video available on www.summa.eu/video/poster-trim LASER BEAM

SAFETY PACK
A laser beam system surrounds the flatbed and controls this defined
area for external movement. When the laser beams are interrupted,
either intentionally or deliberately, the cutting process will be paused.
By means of a simple action of the operator the cutting process can
be resumed without loss of data.
The flatbed is also equipped with four emergency stops, which will
fully interrupt the cutting process, if necessary. This guarantees the PROTECTED AREA
safety of the operator and bystanders.
LASER BEAM

Twin ™ Workflow
The Twin™ Workflow is designed to maximize productivity, with flexibility in the
finishing workflow. At the core of this innovating cutting solution is a Summa
F Series flatbed (F1612) and a Summa S Class 2 OPOS-CAM roll cutter (S2TC160).
The Twin™ Workflow has been developed to choose the optimal workflow for your
specific job. By using the strength of both machines, productivity will be increased
considerably. The Twin™ Workflow allows the processing of a job initiated on a
Summa S Class 2 roll cutter (kiss-cutting) and to finish the job on an F1612 flatbed
cutter (cutting through). Both machines use the same cut-data and read the same
marks by utilizing the built-in camera on each of the cutting systems.

With the Twin™ Workflow productivity and performance will be brought to a higher
level and its smooth integration into the existing workflows will further contribute to
the customer’s Productivity, Performance and Profitability!
Video available on www.summa.eu/video/twin

MEDIA OPTIONS / F1612

Basket
The Basket is a handy accessory to reduce the media handling time,
optimizing your workflow. In combination with the included conveyor
system, the F1612 can automatically process several feet of material
while the basket is capturing the cut-out vinyl and/or waste material.
Once started, this roll to roll process will keep cutting without operator
intervention. In the meantime, the basket is keeping the workspace clean.

Extension Tables
The sturdy Extension Tables can be placed in front and at the back of the
F1612 and can be adjusted to the correct height. This way board material,
several times longer than the F1612 working area, can be processed in
combination with the Conveyor System. When the tables are not in use,
you can fold them to save space.

They will also give you the ability to use the feature, Continuous Sheet
Feed. With the Continuous Sheet Feed, the flatbed table can transport
your material from the loading area to its working area and afterwards the
processed material will be transported into the waste basket or extension
table in front. This enables the user to load and unload material while
cutting and can lead to significant increases in productivity.

This will avoid idle periods during the processing of material, which will
add significant value to the overall workflow.

11
 https://www.china-oyea.com/

summaFley TM
PRO

SummaFlex Pro is a front-end application software with job preparation, post

processor and import plug-ins for CAD and illustration software (e.g., Illustrator
and CorelDRAW). The software integrates the F Series perfectly into your workflow
needs. SummaFlex Pro is the ideal link between your design station, RIPstation,
printers and cutting devices. Once the workflow is set, macros automate the
process. Consequently, the operator’s handling before starting the next job is
reduced to a minimum. The downtime of the table is also reduced to a minimum.

SummaFlex Pro is standard included and comes with support for optical camera
recognition. This ensures maximum flexibility in positioning registration marks
with increased accuracy during contour cutting.

Barcode
Certain RIPS offer the possibility to print a barcode with OPOS marks. This
barcode can be used to identify the job and to automatically obtain the
necessary cut data from the computer.
By scanning the barcode, the operator doesn’t need to localise the job himself
anymore. Scanning the job happens automatically by the built-in camera of
the Summa F Series system or by a handscanner, depending on the selected
workflow. Consequently the job will be opened in SummaFlex Pro to be
processed immediately.
The biggest advantage of Summa’s revolutionary camera system is that as
soon as a job is finished, the camera will search for the next job without
operator intervention.
When using this workflow, the process will be repeated automatically.
Note: an extra licence for the camera is required.

Sorting
In order to minimize output time, the order in which objects are handled is very
important. SummaFlex Pro has the capability of determining the start (S) and
end (E) of a vector, as well as the order of processing.
The traverse path can be simulated for each layer before the output. The
simulation speed can be adjusted continuously.

The aim is to shorten the traverse path. Basic sorting after selection of the
main direction is done by SummaFlex Pro itself. Adjustments can be made at
any time and can be validated with a new simulation.

Camera Recognition
The recognition process, localisation of the registration marks
and the process itself can be tracked in the camera preview
window. All kinds of compensations and marks, which occur
in everyday practice, are manageable with SummaFlex Pro –
whether they are film, textiles, cardboard, etc.

Overcut Compensation
This SummaFlex Pro functionality avoids
or minimizes overcuts in the corners.

12
 https://www.china-oyea.com/
1
Milling
With the interactive milling function, any change in tool diameter and rotation is A
performed immediately and shown on the working area. The milling objects are
displayed with transparent fill and full-colored radius correction. A recalculation is
performed at every scaling of the milling objects. Embossing/engraving: the area B
that needs to be embossed is provided with milling paths in a hatch or an island
pattern, or optionally, with pocket connection where the tool is not being raised. 2
The milling process can occur at multiple depths. All milling paths are
automatically created anddisplayed; the tool diameter is taken into account.
3

Workflow Compatibility
With the Workflow Compatibility function, SummaFlex Pro can SummaFlex Pro has a wide variety of file import filters. This
seamlessly fit into existing workflows. SummaFlex Pro offers a means nearly all data can be imported and processed.
very flexible data import and is supported by the following RIP
manufacturers. Vector/ CAD:
.PDF .DXF .HPGL
RIP Manufacturers: .AI .IK .CMX
Agfa Asanti ErgoSoft TexPrint Prepare-it .EPS .GTP .PS
Cadlink RIP GMG Production Suite SAi .WMF .JTP .JPG
Caldera RIP IGEPA Master RIP Wasatch RIP .EMF .JOB
ColorGATE RIP ONYX RIP
EFI RIP Pjannto RIP Special Filters:
ErgoSoft PosterPrint PosterJet .Cut / I-Cut Vision (up to Version 6)
.ZCC / Zünd Cut Center
Packaging Software Compatibility: .OXF / Optiscout
Arden Engview
ERPA Picador

PLM Packlib
The PLM Packlib* for Summa is a library of resizable standard
packaging models. The most popular packaging standards
FEFCO (corrugated cardboard) and ECMA (folding carton)
are included. Also a few POS display designs and solid
cardboards (furniture) designs
are available.
Box/designs dimensions and material thickness are
parametric. So, within a few clicks the correct cutting and
folding lines are generated. These lines can be exported to
a layered Illustrator file, ready to put graphics on it. This
‘Summa version’also has the option to generate an OXF file, *Note:The PLM Packlib isa program from TreeDim,
mainly known by the CAD/packaging software‘Picador’
immediately ready to be used by SummaFlex Pro.

1 PREPARE
DESIGN 2 PRINT
& SETUP 3 FINISH

RIP
Barcode
scanning
21489278124508

Camera
recognition

13
 https://www.china-oyea.com/

Axis ControlTM software gives you full control over Summa’s

cutting table. The optimized design of the touch screen
makes Axis Control the optimum interface for the machine
operator.

With the optional wireless controller, the operator is free

to move around the table while changing basic settings.
The wireless controller is included free of charge with the
Summa F Series.

TECHNICAL SPECIFICATIONS

Model F1612 F1330 F1832 F2630

Dimensions 236 x 214 x 110 cm 214 x 410 x 122 cm 270 x 425 x 122 cm 349 x 410 x 122 cm

Media Width Up to 165 cm Up to 134 cm Up to 190 cm Up to 270 cm

Working Area 160 x 120 cm 129 x 305 cm 184 x 320 cm 265 x 305 cm

1.3 kW (50Hz) / 2.2 kW (50Hz) / 2 x 2.2 kW (50Hz) / 2 x 2.2 kW (50Hz) /

Vacuum
1.75 kW (60Hz) 2.55 kW (60Hz) 2 x 2.55 kW (60Hz) 2 x 2.55 kW (60Hz)

Vacuum Variable over width 6 zones 8 zones 12 zones

Zones of machine (2 rows x 3 columns) (2 rows x 4 columns) (2 rows x 6 columns)

Speed Up to 1000 mm/sec Up to 1000 mm/sec Up to 1000 mm/sec Up to 1000 mm/sec

Acceleration Up to 1 G Up to 1 G Up to 1 G Up to 1 G

Standard: Standard: Standard: Standard:

3 x 400V + N, 50Hz, 3 x 400V + N, 50Hz, 3 x 400V + N, 50Hz, 3 x 400V + N, 50Hz,
max 20A max 30A max 30A max 30A
Requirements Or: 3 x 208V + N, Or: 3 x 208V + N, Or: 3 x 208V + N, 60Hz, Or: 3 x 208V + N, 60Hz,
60Hz, max 30A 60Hz, max 30A max 30A max 30A
Or: 3 x 230V, 50Hz, Or: 3 x 230V, 50Hz, Or: 3 x 230V, 50Hz, Or: 3 x 230V, 50Hz,
max 20A max 30A max 30A max 30A

. F Series Flatbed System

. Axis Control Software
Standard . Conveyor System with Pneumatic Media clamps
. Drag Module
Solution and Roll Support
. ADC Right
includes . Safety Pack
. Camera System
. SummaFlex Pro

For complete specifications, please visit www.summa.eu

F1330 F1832 F2 6 3 0
129 x 305 cm 184 x 320 cm 265 x 305 cm

F1612
160 x 120 cm

14
 https://www.china-oyea.com/

PARTS & TOOLS

Order codes: Consumables
Consumables for Drag Module Consumables for Electronic Oscillating Consumables for Routing System
Tool / EOT
391-332 Drag Knife Holder for 36o & 60o 500-3313 Knife Guide for EOT 500-9850 Routing Bits D3/3 L60/10 1Fl UC (3x)
391-360 Standard Drag Knives - 36o (5x) 500-9800 EOT Knife L25 - 65o 500-9851 Routing Bits D3/3 L60/20 1Fl UC (3x)
391-231 Drag Knife - 60o 500-9810 EOT Knife L25 - 65o - 80o 500-9852 Routing Bits D4/4 L50/12 1Fl UC (3x)
MP06BK Fibre Tip Pens - Black (4x) 500-9811 EOT Knife L25 - 65o - 85o 500-9853 Routing Bits D4/4 L70/30 1Fl UC (3x)
395-430 Roller Ball Pens - Black (5x) 500-9812 EOT Knife L28 - 65o - 85o 500-9854 Routing Bits D6/3 L50/06 MP 1Fl UC (3x)
395-431 Roller Ball Pens - Blue (5x) 500-9813 EOT Knife L25 - 0o - 65o 500-9856 Routing Bits D6/4 L50/12 MP 1Fl UC (3x)
395-434 Pen Holders 500-9814 EOT Knife L38 - 45o - 86o 500-9857 Routing Bits D6/6 L50/12 MP 1Fl UC BAL
500-9815 EOT Knife L33 - 45o - 85o (3x)
500-9858 Routing Bits D6/6 L58/22 MP 1Fl UC BAL
(3x)
Consumables for Tangential Module Consumables for Pneumatic Oscillating 500-0241 3 mm Collet for 1050 Kress
Tool / POT 500-0242 4 mm Collet for 1050 Kress

390-534 St a d ar Tang enti a Kn fe - 36o 500 -9830 POT Knife Flat Point L20 T0 .63 3x 500 -0243 6 mm C ollet for 1050 Kress
390-550 Sa n bla tT a n g e nti lK if e - 6 0 500 -9831 POT Knife Flat Point L27 T0 .63 3x 500 -0244 8 mm C ollet for 1050 Kress
390-551 Double Tip Tangential Knife - 36o 500-9832 POT Knife Flat Point L20 T1.5 (3x)
390-560 Tangential Knife 45o Wedge 40/25o 500-9833 POT Knife Serrated L27 T1.0 (3x)
390-553 Knife Install Tool 500-9834 POT Knife L20 T1.0 (3x)
395-348 Nose Piece for 36o
500-9801 Single Edge Cutout Knife - 65o Consumables for Rotary Module Accessories
500-9802 Double Edge Cutout Knife - 50o Decagonal Knife D25 (3x) Vacuum Cleaner Bag for Hercules (5x)
500-9860 500-9347
500-9803 Double Edge Cutout Knife - 60o Filter for Hercules
500-9861 Decagonal Knife D28 (3x) 500-9348
500-9807 Heavy Duty Cutout Knife - 45o / 90o Carbon Filter for Hercules
500-9862 Decagonal Knife D32 (3x) 500-9349
500-9825 V-Cut Blade - 0.9 mm (5x)
500-9332 Vacuum Cleaner Bag for 500-9331 (5x)
500-9826 V-Cut Blade - Hard Metal
500-3303 Gliding Disk Single Sided Knife
500-3315 Gliding Disk Double Sided Knife

Order codes: Hardware

F1612-22/ F1612 Flatbed System F2630-22/ F2630 Flatbed System F1612-22, F1330-22,F1832-22 & F2630-22
Media Handling Options Mats And Belts Tools for Tangential Module
500-9120 Basket 500-9153 Conveyor Belt (F2630) 500-9311 Kiss Cutting Tool
500-9121 Extension Table 500-9154 Protective Mat (2x) (F2630) 500-9312 Single Edge Cutout Tool
500-9336 Routing Mat (F2630) 500-9313 Double Edge Cutout Tool
500-9314 Heavy Duty Cutout Tool
Mats And Belts Miscellaneous Options 500-9325 Creasing Tool D25 R3 W8 H7
500-9326 Creasing Tool D25 R1.5 W8 H5.5
500-9114 Conveyor Belt (F1612) 500-9155 Kit Pump Connection 12m 500-9327 Creasing Tool D25 R0.75 W1.5 H1.5
500-9115 Protective Mat (F1612) 500-9156 Kit Pump Connection 25m 500-9328 Creasing Tool D15 2pt
500-9333 Routing Mat (F1612) 500-9329 Creasing Tool D15 1pt
500-9340 V-Cut Tool - 0o
F1330-22 / F1330 Flatbed System F1612-22, F1330-22,F1832-22 & F2630-22 500-9341 V-Cut Tool - 15o
Mats And Belts Modules 500-9342 V-Cut Tool - 22.5o
500-9343 V-Cut Tool - 30o
500-9163 Conveyor Belt (F1330) 500-9300 Drag Module 500-9344 V-Cut Tool - 45o
500-9164 Protective Mats (2x) (F1330) 500-9310 Tangential Module 500-9320 Electronic Oscillating Tool
500-9336 Routing Mat (F1330) 500-9330 Routing System (F1612) 500-9350 Pneumatic Oscillating Tool
500-9357 Routing System (F1330)
Miscellaneous Options 500-9354 Routing System (F1832)
500-9337 Routing System (F2630)
500-9165 Kit Pump Connection 12m
500-9372 HF Routing System (F1612)
Automated Depth Control
500-9166 Kit Pump Connection 25m
500-9371 HF Routing System (F1330) 500-9126 Field Upgrade: ADC Left (F1612)*
500-9373 HF Routing System (F1832) *Requires: ADC Right
F1832-22 / F1832 Flatbed System 500-9370 HF Routing System (F2630)
500-9360 Rotary Module 500-9130 Field Upgrade:ADC Left
Mats And Belts
(F1330/F1832/F2630)*
500-9355 Conveyor Belt (F1832) *Requires: ADC Right
500-9356 Protective Mat (2x) (F1832)
500-9333 Routing Mat (F1832)

Miscellaneous Options Accesories

500-9155 Kit Pump Connection 12m 500-9220 Base for Safety Pole
500-9156 Kit Pump Connection 25m 500-9345 Vacuum Cleaner 3000W: Hercules
500-9331 Vacuum Cleaner 1400W: 230V / 50Hz

15
https://www.china-oyea.com/