Scribd
Upload
412 views1 page

When To Use ASME Section VIII Div 2 Class 1 and Class 2

Class 1 pressure vessels are suitable for general service conditions and simpler designs, while Class 2 vessels can withstand higher pressures and temperatures and are required for complex geometries. The choice between Class 1 and Class 2 depends on operating conditions, pressures and temperatures, vessel geometry, and contained fluids - Class 1 is sufficient for standard conditions and simple geometries, but Class 2 with advanced analysis may be needed for more demanding environments or complex features.

Uploaded by

Amrish Rami
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
412 views1 page

When To Use ASME Section VIII Div 2 Class 1 and Class 2

Class 1 pressure vessels are suitable for general service conditions and simpler designs, while Class 2 vessels can withstand higher pressures and temperatures and are required for complex geometries. The choice between Class 1 and Class 2 depends on operating conditions, pressures and temperatures, vessel geometry, and contained fluids - Class 1 is sufficient for standard conditions and simple geometries, but Class 2 with advanced analysis may be needed for more demanding environments or complex features.

Uploaded by

Amrish Rami
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Issue: When to use ASME Section VIII Division 2 Class 1 and Class 2

Solution: In ASME Section VIII Division 2, pressure vessels are classified into two classes:
Class 1 and Class 2. The decision of whether to use Class 1 or Class 2 depends on the specific
requirements of your pressure vessel and the operating conditions it will be subjected to. Here's a
general overview of when to use each class:
1. Class 1:
• General Service: Use Class 1 when designing pressure vessels for general service
conditions. These are typical operating conditions that don't involve exceptionally high
temperatures, pressures, or aggressive fluids. Class 1 vessels are designed using simpler
and more conservative methods.
• Lower Complexity: Class 1 vessels are suitable for simpler geometries, straightforward
loading conditions, and less challenging design scenarios.
• Economic Considerations: If your pressure vessel operates under standard conditions
and doesn't require a specialized design approach, Class 1 might be more cost-effective.
2. Class 2:
• High Pressure and Temperature: Choose Class 2 when designing pressure vessels
that will operate under higher pressure and temperature conditions. Class 2 vessels are
designed to handle more severe and demanding operating environments.
• Complex Geometries: If your pressure vessel has complex geometries, such as non-
cylindrical shapes, conical sections, or other intricate features, Class 2 may provide more
advanced design methods to address stress concentrations.
• Advanced Analysis: Class 2 vessels often require more detailed analysis, including
finite element analysis (FEA) and other advanced techniques, to accurately predict stress
and deformation behavior.
• Specialized Conditions: If your pressure vessel will contain aggressive or corrosive
fluids, or if it's intended for specific industries like chemical processing or
petrochemicals, Class 2 might be the appropriate choice due to its more rigorous design
criteria.
In summary, the choice between ASME Section VIII Division 2 Class 1 and Class 2 depends on
factors such as operating conditions, pressure, temperature, vessel geometry, and the nature of
the contained fluids. If your vessel operates under standard conditions and has a relatively simple
geometry, Class 1 might be sufficient. However, if your vessel operates in more demanding
conditions or has complex features, Class 2 with its advanced analysis methods could be more
appropriate to ensure safety and performance. It's recommended to work closely with
experienced engineers who are familiar with ASME codes to make the appropriate classification
decision based on your specific case.

You might also like