Pac-Seal

Single Spring and Elastomer Bellows Mechanical Seals

Global Profile

Seal Excellence Starts with Superior Design

Pac-Seal designs are a result of years of experience The power of Flowserve

with customers varying shaft sealing applications.
Today, utilizing the most sophisticated CAD equipment
we continue to analyse the most challenging problems As a unit of Flowserve, Pac-Seal draws on
and respond with a product line that meets demands for the experience and knowledge of Flowserve
seal solutions. associates around the world. With an
extensive network of direct sales engineers
Principle Advantages of Single Spring and distribution you are connected to a sealing
Mechanical Seals solution that exactly meets your specifications.

Single Spring - gives superior axial and angular Quality Assurance…

flexibility. The seal’s design compensates for Not just a process, a promise
misalignment and machinery tolerances.
Under no circumstance will the quality of
Non-Clogging - large single spring, plus free movement Pac-Seal be compromised. From incoming
of the elastomer shaft seal, combats seal failure inspection of raw material, through in-process
caused by build up of solid material.
controls to final assembly, our commitment to
Self-adjusting - the flexible moving elastomer shaft seal quality control is reflected in each of the Pac-
accommodates shaft end-float and takes up wear. Seal lines we manufacture. Flowserve works to
established quality assurance procedures, which
Minimal Wear - strong static seal to the shaft are approved by Lloyds to ISO 9001.
minimises shaft fretting.
Product environment testing
Versatile - Compact in design and simple to fit. ensures maximum seal
Standard designs and sizes for all common performance
imperial, metric and DIN EN 12756 housings are
standard. Extremely cost effective - low capital When customers are encountering unusual
cost, proven reliability of design, easy to fit and operating conditions, seal material selection
accommodating in use, excellent seal performance
becomes critical to the success of the
and ex-stock service on a complete range of
seal types, materials and sizes, make Pac-Seal application. In these situations, Flowserve
single spring seals the choice for the majority of can provide monitored testing of customer
applications. equipment in our laboratory. By conducting
a seal evaluation under simulated operating
conditions, we are able to make the appropriate
product recommendations that ensure maximum
seal performance.

2
 flowserve.com

Mechanical Seals

Our delivery keeps you up and running Product Types

We know that downtime is not only a frustration, it The Pac-Seal single spring seal range is
costs you money. That’s why we maintain a large divided into three main product groups, namely;
inventory of both complete products and individual O-Ring mounted seals, elasto­mer diaphragm
components. This enables us to respond quickly to seals and elastomer bellows seals. These
your needs, often with next day delivery. single spring mechanical seals have been
designed to service the European pump market
Special Designs and are totally inter-changeable with all other
manufacturer's equivalent seals, without any
Pac-Seal has built a reputation meeting customers’ modification to the existing seal housings and
special requirements with rapid prototype gland plates.
development or modifications to existing designs.
Please contact us for a more cost effective solution O-Ring Mounted Sealing Operation
for your current special sealing needs.
These conical spring, O-Ring mounted,
mechanical seals have been designed to have
O-Ring Mounted a small cross-section and a complete recessed
O-Ring housing. A narrow seal head width
allows the seals to easily fit in confined DIN
EN 12756 housings, whilst also providing the
benefits of reduced face surface running speed
with increased circulation around the seal faces.
Elastomer Diaphragm
The machined, recessed O-Ring groove helps
prevent the seal from clogging due to build up of
product around the shaft O-Ring.
Seal drive is provided by the conical spring
tightly gripping the shaft at its base. Stock seals
are supplied as standard with right hand drive
Elastomer Bellows springs for clockwise shafts. Left hand springs
for anti-clockwise shaft rotation should be
specified on order.

Typical designs of the three product groups

3
Mechanical Seals

Our resilient O-Ring mounted seal design is technically Elastomer Bellows Sealing
efficient (readily accommodating misalignment and Operation
vibration) and is highly versatile. Flowserve offers a
wide range of face material combinations and seal sizes Pac-Seal elastomeric bellows seals are of
to suit most applications. compact design with a sealing action that
provides many benefits.

Diaphragm Sealing Operation The bellows high strength and flexibility is

the key to the very reliable performance of
The drawing on the previous page shows the standard this type of seal as it readily accommodates
section of a Pac-Seal elastomer diaphragm seal. misalignment, end-float and seal face wear.

The shaft seal is provided by the elasto­mer diaphragm, The convoluted bellows profile makes these
which is squeezed onto the shaft by the drive ring. Once seals ideal for media prone to clogging or for
fitted, the elastomer diaphragm will grip the shaft giving hygienic applications.
a strong static seal and positive drive via the drive ring
to the seal face. Designed for confined spaces and limited gland
depths, Flowserve elastomer bellows seals are
As there is no relative movement between the shaft bi-directional in operation and provide secure
and the elastomer diaphragm, shaft fretting, wear and bellows sealing for longer life in a wide range of
hang-up hysteresis are eliminated and the seal can applications.
immediately accommodate some shaft run-out and
misalignment.

Shaft axial movement and the movement required

during the working life of the seal is handled by the
elastomer flexing at its junction point.

The spring force and the seal pumping pressure force

maintain the faces in full contact whilst the elastomer
diaphragm acts as a bellows providing sustained
flexibility. Positive drive of the seal face is transmitted
via the drive ring and retaining housing and not via the
spring, which merely provides some closing force to the
seal faces.

These seals can therefore be used to seal shafts rotating

in either direction and in vacuum applications.

4
 flowserve.com

Types

DIN Compliance

Sectional View
Standard Seat
DIN Seat Only

Optional Seat
Page
Type

Note
P35 6 8N
P38 7 8N
P38D 8 8L 8S
P39 9 8B
P42 10 2N
O-Ring Mounted

P42D 11 2D
P426 12 2D According to EN 12756 (DIN 24960 L1K)
P43 13 3N
P43D 14 3D
P32 15 8L For stepped shaft
P260 16 9N 9A
P270 17 9N
P280 18 9N
P290 19 9U
P140 20 B9 8S
Elastomer Bellows

P142 21 B9 8S According to EN 12756 (DIN 24960 L1K)

P190 22 8N B9 / 8S / 8L
P192 23 8N B9 / 8S DIN L1K working length
P193 24 8N B9 / 8S DIN L1N working length
P150 25 B5 1H
P151 26 B3 3H
P250 27 B4 4S / 4L According to EN 12756 (DIN 24960 L1K)
P100 28 B2 1H
P200 28 B2 1H
P110 29 B1 3H
Elastomer Diaphragm

P220 29 B1 3H
P110U 30 B1 3H
P240 31 B4 4S / 4L According to EN 12756 (DIN 24960 L1K)
P300 32 B2 1H
P320 33 B2 1H
P340 34 B1 3H
P350 35 B1 3H
P167 36 8L According to EN 12756 (DIN 24960 L1K)
Wave & Multi

P167B 37 8L For stepped shaft

Spring

P168 38 6N 4L
P168W 39 6W
P168Y 39 6Y
P40 40 4S / 4L / 3H DIN seat for metric sizes
P118 41 B8
P160 42 B6
Special

P161 42 B65
P170 43 B7
P171 43 B75
P23 44 Locking collar

Type Page Secondary Seal

8N,8B,2N,2D,3N,3D,9N 46 O-Ring
Stationary Seats

8S,8L 47 O-Ring
4S,4L 48 O-Ring
1H,3H 49 O-Ring
B1,B2,B3,B4,B5,B9 50 Boot
5V 51 PTFE
3P 52 O-Ring
5A 53 PTFE
5
O-Ring Mounted Seal

Pac-Seal P35
Single conical spring, O-Ring mounted seal design
with monolithic rotary seal face. Pac-Seal P35 is
supplied with right hand spring and type 8N seat as
standard. Optional left hand spring is available for
CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P35 with 8N Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 19.20 20.00 15.90 6.60
12 21.60 22.00 16.00 5.60
14 24.60 25.00 16.00 5.60
15 24.60 27.00 17.40 6.60
16 28.00 27.00 19.00 7.50
18 30.00 30.00 20.50 8.00
20 35.00 32.00 22.00 7.50
22 35.00 35.00 23.50 7.50
24 38.00 38.00 25.00 7.50
25 38.00 40.00 26.50 7.50
28 42.00 43.00 26.50 9.00
30 45.00 45.00 25.00 10.50
32 48.00 47.00 28.50 10.50
35 52.00 50.00 28.50 11.00
38 55.00 56.00 32.00 10.30

6
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P38
Single conical spring, O-Ring mounted seal design.
Pac-Seal P38 is supplied with right hand spring and
type 8N seat as standard. Optional left hand spring is
available for CCW shaft rotation.

Operating Parameters
Pressure up to 13 bar
Temperature -30 to 180°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P38 with 8N Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 19.20 19.00 15.50 6.60
12 21.60 21.00 15.50 5.60
14 24.60 23.00 15.50 5.60
15 24.60 24.00 15.50 6.60
16 28.00 26.00 17.50 7.50
18 30.00 29.00 18.50 8.00
19 31.00 31.00 20.00 7.50
20 35.00 31.00 20.00 7.50
22 35.00 33.00 21.50 7.50
24 38.00 35.00 23.00 7.50
25 38.00 36.00 24.50 7.50
26 40.00 37.00 24.50 8.00
28 42.00 40.00 24.50 9.00
30 45.00 43.00 24.50 10.50
32 48.00 46.00 28.00 10.50
33 48.00 46.00 28.00 11.00
35 52.00 49.00 28.00 11.00
38 55.00 53.00 31.00 10.30
40 58.00 56.00 34.00 10.80
42 62.00 59.00 35.00 12.00
43 62.00 59.00 35.00 12.00
45 64.00 61.00 36.50 11.60
48 68.40 64.00 42.00 11.60
50 69.30 66.00 43.00 11.60
55 75.40 71.00 47.00 13.30
58 78.40 76.00 50.00 13.30
60 80.40 78.00 51.00 13.30
65 85.40 84.00 52.00 13.00
70 92.00 90.00 54.00 13.00
75 99.00 98.00 55.00 14.00
80 104.00 100.00 58.00 15.00

7
O-Ring Mounted Seal

Pac-Seal P38D
Single conical spring, O-Ring mounted seal design
suitable for DIN seal housings. Pac-Seal P38D is
supplied with right hand spring and type 8L DIN
long seat. Optional left hand spring is available for
CCW shaft rotation. Type 8S DIN short seat can be
supplied.

Operating Parameters
Pressure up to 13 bar
Temperature -30 to 180°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P38D with 8L and 8S Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton 8L Seat 8S Seat

Shaft Size ØD1 ØD3 L1 L2 L2 L4 L5

ØD (mm) (8S/8L) (8L) (8S) (8L) (8L)
10 21.00 19.00 15.50 10.00 6.60 3.00 5.00
12 23.00 21.00 16.00 10.00 6.60 3.00 5.00
14 25.00 23.00 16.50 10.00 6.60 3.00 5.00
16 27.00 26.00 18.00 10.00 6.60 3.00 5.00
18 33.00 29.00 19.50 11.50 7.50 3.00 5.00
20 35.00 31.00 22.00 11.50 7.50 3.00 5.00
22 37.00 33.00 21.50 11.50 7.50 3.00 5.00
24 39.00 35.00 23.50 11.50 7.50 3.00 5.00
25 40.00 36.00 26.50 11.50 7.50 3.00 5.00
28 43.00 40.00 26.50 11.50 7.50 3.00 5.00
30 45.00 43.00 26.50 11.50 7.50 3.00 5.00
32 48.00 46.00 28.50 11.50 7.50 3.00 5.00
33 48.00 46.00 28.50 11.50 7.50 3.00 5.00
35 50.00 49.00 28.50 11.50 7.50 3.00 5.00
38 56.00 53.00 33.50 14.00 9.00 4.00 5.00
40 58.00 56.00 36.00 14.00 9.00 4.00 5.00
43 61.00 59.00 38.50 14.00 9.00 4.00 5.00
45 63.00 61.00 39.50 14.00 9.00 4.00 5.00
48 66.00 64.00 46.00 14.00 9.00 4.00 5.00
50 70.00 66.00 45.00 15.00 9.50 4.00 5.00
53 73.00 69.00 47.00 15.00 11.00 4.00 5.00
55 75.00 71.00 49.00 15.00 11.00 4.00 5.00
58 78.00 76.00 55.00 15.00 11.00 4.00 5.00
60 80.00 78.00 55.00 15.00 11.00 4.00 5.00
63 83.00 81.00 55.00 15.00 11.00 4.00 5.00
65 85.00 84.00 55.00 15.00 11.00 4.00 5.00
68 90.00 88.00 55.00 18.00 11.30 4.00 5.00
70 92.00 90.00 57.00 18.00 11.30 4.00 5.00
75 97.00 98.00 62.00 18.00 11.30 4.00 5.00
80 105.00 100.00 61.80 18.20 12.00 4.00 5.00

8
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P39
Single conical spring, O-Ring mounted seal design
similar to Pac-Seal P38, but with solid stainless steel
rotary seal face and carbon stationary seat. Supplied
with right hand spring and type 8B seat as standard.
Optional left hand spring is available for CCW shaft
rotation.

Operating Parameters
Pressure up to 13 bar
Temperature -30 to 180°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P39 with 8B Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 19.20 19.00 15.50 7.10
12 21.60 21.00 15.50 7.60
14 24.60 23.00 15.50 7.60
15 24.60 24.00 15.50 8.60
16 28.00 26.00 17.50 9.00
18 30.00 29.00 18.50 10.00
19 31.00 31.00 20.00 9.00
20 35.00 31.00 20.00 9.50
22 35.00 33.00 21.50 9.50
24 38.00 35.00 23.00 9.50
25 38.00 36.00 24.50 9.50
26 40.00 37.00 24.50 10.00
28 42.00 40.00 24.50 11.00
30 45.00 43.00 24.50 11.00
32 48.00 46.00 28.00 11.00
35 52.00 49.00 28.00 11.50
38 55.00 53.00 31.00 11.50
40 58.00 56.00 34.00 11.50
42 62.00 59.00 35.00 14.30
43 62.00 59.00 35.00 14.30
45 64.00 61.00 36.50 14.30
48 68.40 64.00 42.00 14.30
50 69.30 66.00 43.00 14.30
55 75.40 72.00 47.00 15.30
60 80.40 78.00 51.00 15.30
65 85.40 84.00 52.00 15.30
68 91.50 88.00 53.00 16.00
70 92.00 90.00 54.00 15.30
75 99.00 98.00 55.00 15.30
80 104.00 100.00 58.00 16.30

9
O-Ring Mounted Seal

Pac-Seal P42
Single conical spring, O-Ring mounted seal design
with solid stainless steel rotary seal face and carbon
seat. Pac-Seal P42 is supplied with right hand spring
and type 2N seat as standard. Optional left hand
spring is available for CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P42 with 2N Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Carbon
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 18.10 19.00 15.00 5.50
12 20.60 21.00 18.00 5.50
13 23.10 23.00 22.00 6.00
14 23.10 23.00 22.00 6.00
15 26.90 24.00 22.00 7.00
16 26.90 26.00 23.00 7.00
17 26.90 26.00 23.00 7.00
18 30.90 29.00 24.00 8.00
19 30.90 31.00 25.00 8.00
20 30.90 31.00 25.00 8.00
22 35.40 33.00 25.00 8.00
24 35.40 35.00 27.00 8.00
25 38.20 36.00 27.00 8.50
26 38.20 36.00 27.00 8.50
28 43.30 40.00 29.00 9.00
30 43.30 43.00 30.00 9.00
32 43.30 46.00 30.00 9.00
33 53.50 46.00 39.00 11.50
34 53.50 49.00 39.00 11.50
35 53.50 49.00 39.00 11.50
38 60.50 53.00 39.00 11.50
39 60.50 56.00 39.00 11.50
40 60.50 56.00 39.00 11.50
42 60.50 59.00 39.00 11.50
43 60.50 59.00 39.00 11.50
44 65.50 61.00 41.00 11.50
45 65.50 61.00 41.00 11.50
48 65.50 64.00 41.00 11.50
50 72.50 66.00 45.00 11.50
55 72.50 71.00 47.00 11.50
60 79.30 78.00 49.00 11.50
65 84.50 84.00 51.00 11.50
70 89.50 89.60 51.00 11.50
75 94.50 98.00 57.00 11.50
80 99.50 100.00 59.00 11.50
85 105.50 107.50 59.00 13.50
90 111.50 111.00 62.00 13.50
95 116.50 119.00 62.00 13.50
100 119.50 123.80 75.00 13.50
10
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P42D
Single conical spring, O-Ring mounted seal design
with solid stainless steel rotary seal face and carbon
seat. Pac-Seal P42D is supplied as standard with
right hand spring and type 2D seat suitable for DIN
housings. Optional left hand spring is available for
CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P42D with 2D Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 21.00 19.00 15.00 7.00
12 23.00 21.00 18.00 7.00
14 25.00 23.00 22.00 7.00
16 27.00 26.00 23.00 7.00
18 33.00 29.00 24.00 10.00
20 35.00 31.00 25.00 10.00
22 37.00 33.00 25.00 10.00
24 39.00 35.00 27.00 10.00
25 40.00 36.00 27.00 10.00
28 43.00 40.00 29.00 10.00
30 45.00 43.00 30.00 10.00
32 48.00 46.00 30.00 10.00
33 48.00 46.00 39.00 10.00
35 50.00 49.00 39.00 10.00
38 56.00 53.00 42.00 13.00
40 58.00 56.00 42.00 13.00
43 61.00 59.00 47.00 13.00
45 63.00 61.00 47.00 13.00
48 66.00 64.00 47.00 13.00
50 70.00 66.00 46.00 14.00
53 73.00 69.00 56.00 14.00
55 75.00 71.00 56.00 14.00
58 78.00 76.00 56.00 14.00
60 80.00 78.00 56.00 14.00
63 83.00 81.00 56.00 14.00
65 85.00 84.00 66.00 14.00
68 90.00 88.00 64.00 16.00
70 92.00 89.60 64.00 16.00
75 97.00 98.00 64.00 16.00
80 105.00 100.00 72.00 18.00
85 110.00 107.50 72.00 18.00
90 115.00 111.00 72.00 18.00
95 120.00 119.00 72.00 18.00
100 125.00 123.80 72.00 18.00

11
O-Ring Mounted Seal

Pac-Seal P426
Single conical spring, O-Ring mounted seal
design conforming to EN 12756 (DIN 24960) L1K
dimensions. Pac-Seal P426 is supplied with right hand
spring and type 2D seat as standard. Optional left hand
spring is available for CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P426 with 2D Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 21.00 19.00 25.50 7.00
12 23.00 21.00 25.50 7.00
14 25.00 23.00 28.00 7.00
16 27.00 26.00 28.00 7.00
18 33.00 29.00 27.50 10.00
20 35.00 31.00 27.50 10.00
22 37.00 33.00 27.50 10.00
24 39.00 35.00 30.00 10.00
25 40.00 36.00 30.00 10.00
28 43.00 40.00 32.50 10.00
30 45.00 43.00 32.50 10.00
32 48.00 46.00 32.50 10.00
33 48.00 46.00 32.50 10.00
35 50.00 49.00 32.50 10.00
38 56.00 53.00 32.00 13.00
40 58.00 56.00 32.00 13.00
43 61.00 59.00 32.00 13.00
45 63.00 61.00 32.00 13.00
48 66.00 64.00 32.00 13.00
50 70.00 66.00 33.50 14.00
53 73.00 69.00 33.50 14.00
55 75.00 71.00 33.50 14.00
58 78.00 76.00 38.50 14.00
60 80.00 78.00 38.50 14.00
63 83.00 81.00 38.50 14.00
65 85.00 84.00 38.50 14.00
68 90.00 88.00 36.50 16.00
70 92.00 89.60 44.00 16.00
75 97.00 98.00 44.00 16.00
80 105.00 100.00 42.00 18.00
85 110.00 107.50 42.00 18.00
90 115.00 111.00 47.00 18.00
95 120.00 119.00 47.00 18.00
100 125.00 123.80 47.00 18.00
12
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P43
O-Ring mounted, conical spring seal design with
pressed stainless steel head retainer. Pac-Seal P43
is supplied with right hand spring and type 3N seat
as standard. Optional left hand spring is available for
CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P43 with 3N Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Ceramic, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 18.10 19.50 15.00 5.50
11 20.60 22.00 18.00 5.50
12 20.60 22.00 18.00 5.50
13 23.10 24.00 22.00 6.00
14 23.10 24.00 22.00 6.00
15 26.90 26.00 22.00 7.00
16 26.90 26.00 23.00 7.00
17 26.90 26.00 23.00 7.00
18 30.90 32.00 24.00 8.00
19 30.90 32.70 25.00 8.00
20 30.90 32.70 25.00 8.00
21 35.40 36.00 25.00 8.00
22 35.40 36.00 25.00 8.00
23 35.40 36.00 27.00 8.00
24 35.40 37.40 27.00 8.00
25 38.20 38.00 27.00 8.50
28 43.30 42.00 29.00 9.00
30 43.30 44.00 30.00 9.00
32 43.30 45.50 30.00 9.00
33 53.50 46.50 39.00 11.50
35 53.50 49.00 39.00 11.50
38 60.50 56.00 39.00 11.50
40 60.50 58.00 39.00 11.50

13
O-Ring Mounted Seal

Pac-Seal P43D
O-Ring mounted, conical spring seal design with
pressed stainless steel head retainer. Pac-Seal P43D
is supplied as standard with right hand spring and
type 3D seat suitable for DIN housings. Optional left
hand spring is available for CCW shaft rotation.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P43D with 3D Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Ceramic, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
10 21.00 19.50 15.00 7.00
12 23.00 22.00 18.00 7.00
14 25.00 24.00 22.00 7.00
16 27.00 26.00 23.00 7.00
18 33.00 32.00 24.00 10.00
20 35.00 32.70 25.00 10.00
22 37.00 36.00 25.00 10.00
24 39.00 37.40 27.00 10.00
25 40.00 38.00 27.00 10.00
28 43.00 42.00 29.00 10.00
30 45.00 44.00 30.00 10.00
32 48.00 45.50 30.00 10.00
33 48.00 46.50 39.00 10.00
35 50.00 49.00 39.00 10.00
38 56.00 56.00 42.00 13.00
40 58.00 58.00 42.00 13.00

14
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P32
Single conical spring, O-Ring mounted balanced seal
design to suit stepped shaft configuration. Pac-Seal
P32 is supplied as standard with right hand spring
and type 8L DIN long seat with anti-rotation pin-slot.
Optional left hand spring is available for CCW shaft
rotation.

Operating Parameters
Pressure up to 22 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P32 with 8L Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD2 ØD3 L1 L2 L4 L5

ØD (mm)
16 23.00 12 26.00 26.50 10.00 3.00 5.00
18 25.00 14 29.00 29.50 10.00 3.00 5.00
20 27.00 16 31.00 31.00 10.00 3.00 5.00
22 33.00 18 33.00 32.50 11.50 3.00 5.00
24 35.00 20 35.00 32.50 11.50 3.00 5.00
28 39.00 24 40.00 32.50 11.50 3.00 5.00
30 40.00 25 43.00 33.50 11.50 3.00 5.00
33 43.00 28 46.00 35.50 11.50 3.00 5.00
35 45.00 30 49.00 35.50 11.50 3.00 5.00
38 48.00 33 53.00 39.50 11.50 4.00 5.00
40 50.00 35 56.00 43.50 11.50 4.00 5.00
43 56.00 38 59.00 46.00 14.00 4.00 5.00
45 58.00 40 61.00 48.00 14.00 4.00 5.00
50 63.00 45 66.00 55.00 14.00 4.00 5.00
53 66.00 48 69.00 55.00 14.00 4.00 5.00
55 70.00 50 71.00 58.00 15.00 4.00 5.00
60 75.00 55 78.00 60.00 15.00 4.00 5.00
63 78.00 58 81.00 60.00 15.00 4.00 5.00
65 80.00 60 84.00 60.00 15.00 4.00 5.00
70 85.00 65 90.00 61.00 15.00 4.00 5.00
75 92.00 70 98.00 63.00 18.00 4.00 5.00
80 97.00 75 100.00 68.00 18.00 4.00 5.00
85 105.00 80 107.50 68.00 18.00 4.00 5.00

15
O-Ring Mounted Seal

Pac-Seal P260
Robust O-Ring mounted, direct drive pusher seal.
Spring is selected to suit direction of shaft rotation
(RH spring for CW rotation looking at gland plate).
Standard seat is type 9N with anti-rotation pin-slot.
Short, O-Ring mounted type 9A seat can be supplied.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P260 with 9N and 9A Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton 9N Seat 9A Seat

Shaft Size Shaft Size ØD1 ØD2 ØD3 L1 L2 L4 L5

ØD (mm) ØD (inches) (9N/9A) (9N/ 9A) (9N) (9N)
0.625 28.57 19.05 29.00 24.50 9.00 4.00 4.00
0.750 31.75 22.23 32.50 24.50 9.00 4.00 4.00
20 33.32 24.00 34.50 27.50 9.00 4.00 4.00
0.875 34.93 25.40 34.93 26.00 9.00 4.00 4.00
25 1.000 39.85 28.57 38.10 30.00 10.00 4.00 4.00
28 1.125 43.05 31.75 42.60 31.50 10.00 4.00 4.00
30 44.63 33.32 45.50 31.50 10.00 4.00 4.00
32 1.250 46.32 34.92 46.20 34.50 10.00 4.00 4.00
35 1.375 49.48 38.10 49.50 37.50 10.00 4.00 4.00
38 1.500 52.56 42.88 52.50 37.50 10.00 4.00 4.00
40 54.25 44.45 55.00 37.50 10.00 4.00 4.00
42 1.625 55.83 46.02 55.50 37.50 10.00 4.00 4.00
44 1.750 59.02 49.20 59.20 37.50 10.00 4.00 4.00
45 59.02 49.20 59.20 37.50 10.00 4.00 4.00
1.875 63.68 52.37 59.20 42.50 10.00 4.00 4.00
50 65.37 53.97 66.00 45.50 10.00 4.00 4.00
2.000 66.85 55.57 66.68 45.50 10.00 4.00 4.00
2.125 70.03 58.72 70.20 47.00 10.00 4.00 4.00
55 70.03 58.72 70.20 47.00 10.00 4.00 4.00
2.250 73.20 61.90 73.02 47.00 10.00 4.00 4.00
60 76.38 65.07 77.00 50.50 10.00 4.00 4.00
2.375 76.38 65.07 76.20 50.50 10.00 4.00 4.00
2.500 79.56 68.28 79.38 50.50 10.00 4.00 4.00
65 81.23 69.85 82.00 53.50 10.00 4.00 4.00
2.625 82.73 71.42 82.55 53.50 10.00 4.00 4.00
70 2.750 85.90 74.60 86.20 53.50 10.00 4.00 4.00
2.875 89.08 77.77 90.00 56.50 10.00 4.00 4.00
75 90.77 79.37 91.50 56.50 10.00 4.00 4.00
3.000 95.43 80.97 95.25 63.00 10.00 4.00 4.00
80 100.29 85.73 99.50 63.00 10.00 4.00 4.00
3.250 101.78 87.30 101.60 63.00 10.00 4.00 4.00
85 104.77 89.40 105.50 63.00 10.00 4.00 4.00
3.375 105.59 89.40 104.85 63.00 10.00 4.00 4.00
3.500 108.13 93.67 107.95 63.00 10.00 4.00 4.00
90 109.82 95.25 110.50 68.00 10.00 4.00 4.00
95 114.30 100.00 115.50 68.00 10.00 4.00 4.00
100 119.33 104.77 120.00 68.00 10.00 4.00 4.00
4.000 124.00 107.95 124.50 72.50 10.00 4.00 4.00
120 142.87 126.00 144.00 78.90 10.00 4.00 4.00

16
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P270
Robust O-Ring mounted pusher seal design suitable
for wide range of applications. Seal is shaft driven
via split ring and washer. Spring is selected to suit
direction of shaft rotation (RH spring for CW rotation
looking at gland plate).Standard seat is type 9N with
anti-rotation pin-slot.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P270 with 9N Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size Shaft Size ØD1 ØD3 L1 L2 L4 L5

ØD (mm) ØD (inches)
0.625 28.57 29.00 26.00 9.00 4.00 4.00
0.750 31.75 32.50 26.00 9.00 4.00 4.00
20 33.32 34.50 29.00 9.00 4.00 4.00
0.875 34.93 34.93 27.50 9.00 4.00 4.00
25 1.000 39.85 38.10 31.50 10.00 4.00 4.00
28 1.125 43.05 42.60 33.00 10.00 4.00 4.00
30 44.63 45.50 33.00 10.00 4.00 4.00
32 1.250 46.32 46.20 36.00 10.00 4.00 4.00
35 1.375 49.48 49.50 39.00 10.00 4.00 4.00
38 1.500 52.56 52.50 39.00 10.00 4.00 4.00
40 54.25 55.00 39.00 10.00 4.00 4.00
1.625 55.83 55.50 39.00 10.00 4.00 4.00
45 1.750 59.02 59.20 39.00 10.00 4.00 4.00
1.875 63.68 59.20 44.00 10.00 4.00 4.00
50 65.37 66.00 47.00 10.00 4.00 4.00
2.000 66.85 66.68 47.00 10.00 4.00 4.00
2.125 70.03 70.20 48.50 10.00 4.00 4.00
55 70.03 70.20 48.50 10.00 4.00 4.00
2.250 73.20 73.02 48.50 10.00 4.00 4.00
60 76.38 77.00 52.00 10.00 4.00 4.00
2.375 76.38 76.20 52.00 10.00 4.00 4.00
2.500 79.56 79.38 52.00 10.00 4.00 4.00
65 81.23 82.00 55.00 10.00 4.00 4.00
2.625 82.73 82.55 55.00 10.00 4.00 4.00
70 2.750 85.90 86.20 55.00 10.00 4.00 4.00
2.875 89.08 90.00 60.00 10.00 4.00 4.00
75 90.77 91.50 60.00 10.00 4.00 4.00
3.000 95.43 95.25 66.00 10.00 4.00 4.00
80 100.29 99.50 66.00 10.00 4.00 4.00
3.250 101.78 101.60 66.00 10.00 4.00 4.00
85 104.77 105.50 66.00 10.00 4.00 4.00
3.500 108.13 107.95 66.00 10.00 4.00 4.00
90 109.82 110.50 71.00 10.00 4.00 4.00
95 114.30 115.50 71.00 10.00 4.00 4.00
100 119.33 120.00 71.00 10.00 4.00 4.00
4.000 124.00 124.50 75.50 10.00 4.00 4.00
17
O-Ring Mounted Seal

Pac-Seal P280
Robust O-Ring mounted pusher seal. This seal design
uses set screwed seal collar drive. Spring is selected
to suit direction of shaft rotation (RH spring for CW
rotation looking at gland plate). Standard seat is type
9N with anti-rotation pin-slot.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P280 with 9N Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size Shaft Size ØD1 ØD3 L1 L2 L4 L5

ØD (mm) ØD (inches)
0.625 28.57 29.00 32.50 9.00 4.00 4.00
0.750 31.75 32.50 32.50 9.00 4.00 4.00
20 33.32 34.50 35.50 9.00 4.00 4.00
0.875 34.93 34.93 35.50 9.00 4.00 4.00
25 1.000 39.85 38.10 39.00 10.00 4.00 4.00
28 1.125 43.05 42.60 41.00 10.00 4.00 4.00
30 44.63 45.50 41.00 10.00 4.00 4.00
32 1.250 46.32 46.20 44.00 10.00 4.00 4.00
35 1.375 49.48 49.50 47.00 10.00 4.00 4.00
38 1.500 52.56 52.50 47.00 10.00 4.00 4.00
40 54.25 55.00 47.00 10.00 4.00 4.00
42 1.625 55.83 55.50 47.00 10.00 4.00 4.00
45 1.750 59.02 59.20 47.00 10.00 4.00 4.00
1.875 63.68 59.20 55.00 10.00 4.00 4.00
50 65.37 66.00 58.50 10.00 4.00 4.00
2.000 66.85 66.68 58.50 10.00 4.00 4.00
2.125 70.03 70.20 60.00 10.00 4.00 4.00
55 70.03 70.20 60.00 10.00 4.00 4.00
2.250 73.20 73.02 60.00 10.00 4.00 4.00
60 76.38 77.00 63.00 10.00 4.00 4.00
2.375 76.38 76.20 63.00 10.00 4.00 4.00
2.500 79.56 79.38 63.00 10.00 4.00 4.00
65 81.23 82.00 66.00 10.00 4.00 4.00
2.625 82.73 82.55 66.00 10.00 4.00 4.00
70 2.750 85.90 86.20 66.00 10.00 4.00 4.00
2.875 89.08 90.00 71.00 10.00 4.00 4.00
75 90.77 91.50 71.00 10.00 4.00 4.00
3.000 95.43 95.25 77.50 10.00 4.00 4.00
80 100.29 99.50 77.50 10.00 4.00 4.00
3.250 101.78 101.60 77.50 10.00 4.00 4.00
85 104.77 105.50 77.50 10.00 4.00 4.00
3.500 108.13 107.95 77.50 10.00 4.00 4.00
90 109.82 110.50 82.00 10.00 4.00 4.00
95 114.30 115.50 82.00 10.00 4.00 4.00
100 119.33 120.00 82.00 10.00 4.00 4.00
4.000 124.00 124.50 88.50 10.00 4.00 4.00
115 136.52 137.50 88.50 10.00 4.00 4.00
120 142.87 144.00 95.00 10.00 4.00 4.00
18
 flowserve.com

O-Ring Mounted Seal

Pac-Seal P290
Robust O-Ring mounted pusher seal. This seal design
uses set screwed seal collar drive. Spring is selected
to suit direction of shaft rotation (RH spring for CW
rotation looking at gland plate). Standard seat is
double O-Ring mounted type 9U.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P290 with 9U Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Silicon Carbide,
Tungsten Carbide
Stationary Seat Carbon, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
20 37.00 34.50 38.00 23.00
22 39.00 34.93 38.00 23.00
25 40.00 38.10 38.00 23.00
28 44.00 42.00 40.00 23.00
30 47.00 43.50 40.00 24.00
32 48.00 47.00 40.00 24.00
35 51.00 50.00 40.00 24.00
38 54.00 53.00 45.00 24.00
40 57.00 55.00 45.00 24.00
42 60.50 55.50 50.00 24.00
45 61.00 60.00 50.00 24.00
48 64.00 62.00 55.00 24.00
50 67.00 66.00 55.00 24.00
52 70.00 68.00 58.00 24.00
55 73.00 71.00 58.00 24.00
58 76.00 74.00 58.00 24.00
60 80.00 77.00 60.00 26.00
62 83.00 78.00 60.00 26.00
65 86.00 82.00 62.00 26.00
68 89.00 84.00 62.00 26.00
70 89.00 87.00 65.00 26.00
75 95.00 91.50 65.00 26.00
80 99.00 99.50 70.00 26.00
85 105.00 105.50 70.00 26.00
90 111.00 110.50 70.00 26.00
95 114.00 115.50 75.00 26.00
100 118.00 120.00 75.00 26.00
105 132.00 128.00 75.00 28.00
110 137.00 133.00 80.00 28.00
115 140.00 137.50 80.00 28.00
120 147.00 144.00 85.00 28.00
125 150.00 149.00 85.00 28.00
130 156.00 154.00 85.00 28.00
19
Elastomer Bellows

Pac-Seal P140
Short axial length, robust elastomer bellows seal
design. Convoluted bellows design provides excellent
flexibility and durability. P140 seal is supplied with
boot mounted B9 type DIN seat as standard. O-Ring
mounted DIN short 8S type seat is available.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P140 with B9 and 8S Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton B9 Seat 8S Seat

Shaft Size ØD1 ØD3 L1 L2

ØD (mm) (B9/8S) (B9/8S)
10 21.00 20.00 13.40 6.60
12 23.00 22.00 14.40 6.60
14 25.00 24.00 14.40 6.60
15 27.00 25.00 14.40 6.60
16 27.00 26.00 14.40 6.60
18 33.00 32.00 18.50 7.50
20 35.00 34.00 18.50 7.50
22 37.00 36.00 18.50 7.50
24 39.00 38.00 18.50 7.50
25 40.00 39.00 18.50 7.50
28 43.00 42.00 24.50 7.50
30 45.00 44.00 25.50 7.50
32 48.00 46.00 25.50 7.50
33 48.00 47.00 25.50 7.50
35 50.00 49.00 26.50 7.50
38 56.00 54.00 29.00 9.00
40 58.00 56.00 29.00 9.00
43 61.00 59.00 29.00 9.00
45 63.00 61.00 29.00 9.00
48 66.00 64.00 31.00 9.00
50 70.00 66.00 30.50 9.50
53 73.00 69.00 29.00 11.00
55 75.00 71.00 29.00 11.00
58 78.00 78.00 32.00 11.00
60 80.00 80.00 34.00 11.00
65 85.00 85.00 34.00 11.00
70 92.00 90.00 33.70 11.30
75 97.00 99.00 40.70 11.30
80 105.00 104.00 40.50 12.00
85 110.00 109.00 38.50 14.00
90 115.00 114.00 38.50 14.00
95 120.00 119.00 38.50 14.00
100 125.00 124.00 38.50 14.00

20
 flowserve.com

Elastomer Bellows

Pac-Seal P142
Compact and robust convoluted elastomer bellows
seal design providing excellent flexibility and
durability. Seal is fully compliant to EN 12756 (DIN
24960) L1K dimensions. P142 seal is supplied with
boot mounted B9 type DIN seat. O-Ring mounted DIN
short 8S type seat is available.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P142 with B9 and 8S Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
B9 Seat 8S Seat

Shaft Size ØD1 ØD3 L1 L2 L1 + L2

ØD (mm) (B9/8S) (B9/8S) (L1K)
10 21.00 20.00 25.90 6.60 32.50
12 23.00 22.00 25.90 6.60 32.50
14 25.00 24.00 28.40 6.60 35.00
15 27.00 25.00 28.40 6.60 35.00
16 27.00 26.00 28.40 6.60 35.00
18 33.00 32.00 30.00 7.50 37.50
20 35.00 34.00 30.00 7.50 37.50
22 37.00 36.00 30.00 7.50 37.50
24 39.00 38.00 32.50 7.50 40.00
25 40.00 39.00 32.50 7.50 40.00
28 43.00 42.00 35.00 7.50 42.50
30 45.00 44.00 35.00 7.50 42.50
32 48.00 46.00 35.00 7.50 42.50
33 48.00 47.00 35.00 7.50 42.50
35 50.00 49.00 35.00 7.50 42.50
38 56.00 54.00 36.00 9.00 45.00
40 58.00 56.00 36.00 9.00 45.00
43 61.00 59.00 36.00 9.00 45.00
45 63.00 61.00 36.00 9.00 45.00
48 66.00 64.00 36.00 9.00 45.00
50 70.00 66.00 38.00 9.50 47.50
53 73.00 69.00 36.50 11.00 47.50
55 75.00 71.00 36.50 11.00 47.50
58 78.00 78.00 41.50 11.00 52.50
60 80.00 80.00 41.50 11.00 52.50
65 85.00 85.00 41.50 11.00 52.50
70 92.00 90.00 48.70 11.30 60.00
75 97.00 99.00 48.70 11.30 60.00
80 105.00 104.00 48.00 12.00 60.00
85 110.00 109.00 46.00 14.00 60.00
90 115.00 114.00 51.00 14.00 65.00
95 120.00 119.00 51.00 14.00 65.00
100 125.00 124.00 51.00 14.00 65.00

21
Elastomer Bellows

Pac-Seal P190
Short axial length, heavy duty convoluted elastomer
bellows seal design with wide non-DIN cross-section
for optimum flexibility and durability. P190 seal
is supplied with O-Ring type 8N seat as standard.
Alternative boot mounted B9 type DIN seat and DIN
short 8S and DIN long 8L seats are available.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P190 with Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton 8N Seat B9 Seat 8S Seat 8L Seat

Shaft Size ØD1 ØD1 ØD3 L1 L2 L2 L2 L4 L5

ØD (mm) (8N) (B9/8S/8L) (8N) (B9/8S) (8L) (8L) (8L)
10 19.20 21.00 20.00 14.50 6.60 6.60 10.00 3.00 5.00
12 21.60 23.00 24.30 15.00 5.60 6.60 10.00 3.00 5.00
14 24.60 25.00 28.50 17.00 5.60 6.60 10.00 3.00 5.00
15 24.60 27.00 28.50 17.00 6.60 6.60 10.00 3.00 5.00
16 28.00 27.00 28.50 17.00 7.50 6.60 11.50 3.00 5.00
18 30.00 33.00 31.00 19.50 8.00 7.50 11.50 3.00 5.00
20 35.00 35.00 36.50 21.50 7.50 7.50 11.50 3.00 5.00
22 35.00 37.00 36.50 21.50 7.50 7.50 11.50 3.00 5.00
24 38.00 39.00 41.10 22.50 7.50 7.50 11.50 3.00 5.00
25 38.00 40.00 41.10 23.00 7.50 7.50 11.50 3.00 5.00
28 42.00 43.00 47.60 26.50 9.00 7.50 11.50 3.00 5.00
30 45.00 45.00 47.60 26.50 10.50 7.50 11.50 3.00 5.00
32 48.00 48.00 51.00 27.50 10.50 7.50 11.50 3.00 5.00
33 50.00 48.00 51.00 27.50 11.00 7.50 11.50 3.00 5.00
35 52.00 50.00 54.50 28.50 11.00 7.50 11.50 3.00 5.00
38 55.00 56.00 57.90 30.00 10.30 9.00 14.00 4.00 5.00
40 58.00 58.00 60.00 30.00 10.80 9.00 14.00 4.00 5.00
43 62.00 61.00 63.80 30.00 12.00 9.00 14.00 4.00 5.00
45 64.00 63.00 65.70 30.00 11.60 9.00 14.00 4.00 5.00
48 68.40 66.00 69.30 30.50 11.60 9.00 14.00 4.00 5.00
50 69.30 70.00 71.80 30.50 11.60 9.50 15.00 4.00 5.00
53 72.30 73.00 76.00 33.00 12.30 11.00 15.00 4.00 5.00
55 75.40 75.00 78.30 35.00 13.30 11.00 15.00 4.00 5.00
58 78.40 78.00 82.50 37.00 13.30 11.00 15.00 4.00 5.00
60 80.40 80.00 85.50 38.00 13.30 11.00 15.00 4.00 5.00
65 85.40 85.00 90.30 40.00 13.00 11.00 15.00 4.00 5.00
68 91.50 90.00 94.00 40.00 13.70 11.30 18.00 4.00 5.00
70 92.00 92.00 97.00 40.00 13.00 11.30 18.00 4.00 5.00
75 99.00 97.00 102.00 40.00 14.00 11.30 18.00 4.00 5.00
80 104.00 105.00 109.50 40.00 15.00 12.00 18.20 4.00 5.00
85 109.00 110.00 116.70 41.00 14.80 14.00 18.20 4.00 5.00
90 114.00 115.00 122.30 45.00 14.80 14.00 18.20 4.00 5.00
95 120.30 120.00 127.60 46.00 15.80 14.00 17.20 4.00 5.00
100 123.30 125.00 132.00 47.00 15.80 14.00 17.20 4.00 5.00

22
 flowserve.com

Elastomer Bellows

Pac-Seal P192
Compact, heavy duty convoluted elastomer bellows
seal design with wide non-DIN cross-section. Seal
working length is as per EN 12756 (DIN 24960) L1K
dimensions. P192 seal is available with a choice of
O-Ring type 8N seat, boot mounted B9 type DIN seat
and DIN short 8S seat.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P192 with Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
8N Seat B9 Seat 8S Seat

Shaft Size ØD1 ØD1 ØD3 L1 L2 L2

ØD (mm) (8N) (B9/8S) (8N) (B9/8S)
10 19.20 21.00 20.00 25.90 6.60 6.60
12 21.60 23.00 24.30 25.90 5.60 6.60
14 24.60 25.00 28.50 28.40 5.60 6.60
15 24.60 27.00 28.50 28.40 6.60 6.60
16 28.00 27.00 28.50 28.40 7.50 6.60
18 30.00 33.00 31.00 30.00 8.00 7.50
20 35.00 35.00 36.50 30.00 7.50 7.50
22 35.00 37.00 36.50 30.00 7.50 7.50
24 38.00 39.00 41.10 32.50 7.50 7.50
25 38.00 40.00 41.10 32.50 7.50 7.50
28 42.00 43.00 47.60 35.00 9.00 7.50
30 45.00 45.00 47.60 35.00 10.50 7.50
32 48.00 48.00 51.00 35.00 10.50 7.50
33 50.00 48.00 51.00 35.00 11.00 7.50
35 52.00 50.00 54.50 35.00 11.00 7.50
38 55.00 56.00 57.90 36.00 10.30 9.00
40 58.00 58.00 60.00 36.00 10.80 9.00
43 62.00 61.00 63.80 36.00 12.00 9.00
45 64.00 63.00 65.70 36.00 11.60 9.00
48 68.40 66.00 69.30 36.00 11.60 9.00
50 69.30 70.00 71.80 38.00 11.60 9.50
53 72.30 73.00 76.00 36.50 12.30 11.00
55 75.40 75.00 78.30 36.50 13.30 11.00
58 78.40 78.00 82.50 41.50 13.30 11.00
60 80.40 80.00 85.50 41.50 13.30 11.00
65 85.40 85.00 90.30 41.50 13.00 11.00
68 91.50 90.00 94.00 41.20 13.70 11.30
70 92.00 92.00 97.00 48.70 13.00 11.30
75 99.00 97.00 102.00 48.70 14.00 11.30
80 104.00 105.00 109.50 48.00 15.00 12.00
85 109.00 110.00 116.70 46.00 14.80 14.00
90 114.00 115.00 122.30 51.00 14.80 14.00
95 120.30 120.00 127.60 51.00 15.80 14.00
100 123.30 125.00 132.00 51.00 15.80 14.00

23
Elastomer Bellows

Pac-Seal P193
Long length, robust convoluted elastomer bellows
seal design with wide non-DIN cross-section. Seal
working length is as per EN 12756 (DIN 24960) L1N
dimensions. P193 seal is available with a choice of
O-Ring type 8N seat, boot mounted type B9 DIN seat
and DIN short 8S seat.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P193 with Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
8N Seat B9 Seat 8S Seat

Shaft Size ØD1 ØD1 ØD3 L1 L2 L2

ØD (mm) (8N) (B9/8S) (8N) (B9/8S)
10 19.20 21.00 20.00 33.40 6.60 6.60
12 21.60 23.00 24.30 33.40 5.60 6.60
14 24.60 25.00 28.50 33.40 5.60 6.60
15 24.60 27.00 28.50 33.40 6.60 6.60
16 28.00 27.00 28.50 33.40 7.50 6.60
18 30.00 33.00 31.00 37.50 8.00 7.50
20 35.00 35.00 36.50 37.50 7.50 7.50
22 35.00 37.00 36.50 37.50 7.50 7.50
24 38.00 39.00 41.10 42.50 7.50 7.50
25 38.00 40.00 41.10 42.50 7.50 7.50
28 42.00 43.00 47.60 42.50 9.00 7.50
30 45.00 45.00 47.60 42.50 10.50 7.50
32 48.00 48.00 51.00 47.50 10.50 7.50
33 50.00 48.00 51.00 47.50 11.00 7.50
35 52.00 50.00 54.50 47.50 11.00 7.50
38 55.00 56.00 57.90 46.00 10.30 9.00
40 58.00 58.00 60.00 46.00 10.80 9.00
43 62.00 61.00 63.80 51.00 12.00 9.00
45 64.00 63.00 65.70 51.00 11.60 9.00
48 68.40 66.00 69.30 51.00 11.60 9.00
50 69.30 70.00 71.80 50.50 11.60 9.50
53 72.30 73.00 76.00 59.00 12.30 11.00
55 75.40 75.00 78.30 59.00 13.30 11.00
58 78.40 78.00 82.50 59.00 13.30 11.00
60 80.40 80.00 85.50 59.00 13.30 11.00
65 85.40 85.00 90.30 69.00 13.00 11.00
68 91.50 90.00 94.00 68.70 13.70 11.30
70 92.00 92.00 97.00 68.70 13.00 11.30
75 99.00 97.00 102.00 68.70 14.00 11.30
80 104.00 105.00 109.50 78.00 15.00 12.00
85 109.00 110.00 116.70 76.00 14.80 14.00
90 114.00 115.00 122.30 76.00 14.80 14.00
95 120.30 120.00 127.60 76.00 15.80 14.00
100 123.30 125.00 132.00 76.00 15.80 14.00
24
 flowserve.com

Elastomer Bellows

Pac-Seal P150
Robust and compact elastomer bellows seal
design providing optimum flexibility, durability and
performance. Available with boot mounted seat type
B5 and centre O-Ring mounted seat type 1H.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P150 with B5 and 1H Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*1H seat only)
B5 Seat 1H Seat Elastomers Nitrile, EPR, Viton

Shaft Size Shaft Size ØD1 ØD3 L1 L2

ØD (mm) ØD (inches) (B5/1H) (B5/1H)
12 0.500 27.79 22.00 25.40 8.74
13 27.79 22.00 25.40 8.74
14 30.95 24.00 25.40 10.32
15 30.95 25.00 25.40 10.32
16 0.625 30.95 26.00 25.40 10.32
18 34.15 32.00 25.40 10.32
19 0.750 34.15 32.00 25.40 10.32
20 35.70 34.00 25.40 10.32
22 0.875 37.30 36.00 25.40 10.32
24 40.50 38.00 25.40 10.32
25 1.000 40.50 39.00 25.40 10.32
28 1.125 47.63 42.00 33.34 11.99
30 50.80 44.00 33.34 11.99
32 1.250 50.80 46.00 33.34 11.99
33 53.98 47.00 33.34 11.99
35 1.375 53.98 49.00 33.34 11.99
38 1.500 57.15 54.00 33.34 11.99
40 60.33 56.00 33.34 11.99
1.625 60.33 56.00 33.34 11.99
43 63.50 59.00 40.48 11.99
44 1.750 63.50 61.00 40.48 11.99
45 63.50 61.00 40.48 11.99
48 1.875 66.68 64.00 40.48 11.99
50 2.000 69.85 66.70 40.48 13.50
53 73.03 69.00 40.48 13.50
2.125 73.03 69.00 40.48 13.50
55 76.20 71.50 40.48 13.50
2.250 76.20 78.00 40.48 13.50
58 79.38 78.00 40.48 13.50
60 2.375 79.38 80.00 40.48 13.50
2.500 82.55 83.00 40.48 13.50
65 92.08 85.00 49.21 13.50
2.625 92.08 85.00 49.21 15.88
70 2.750 95.25 90.00 49.21 15.88
2.875 98.43 96.00 49.21 15.88
75 3.000 101.60 99.00 49.21 15.88
25
Elastomer Bellows

Pac-Seal P151
Robust and compact elastomer bellows seal
design providing optimum flexibility, durability and
performance. Available with boot mounted seat type
B3 and centre O-Ring mounted seat type 3H.

Operating Parameters
Pressure up to 16 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P151 with B3 and 3H Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*3H seat only)
Elastomers Nitrile, EPR, Viton B3 Seat 3H Seat

Shaft Size Shaft Size ØD1 ØD3 L1 L2

ØD (mm) ØD (inches) (B3 / 3H) (B3 / 3H)
12 0.500 25.40 22.00 20.62 7.93
16 0.625 31.75 26.00 22.23 10.28
18 34.93 32.00 22.23 10.28
19 0.750 34.93 32.00 22.23 10.28
20 38.10 34.00 23.80 10.28
22 0.875 38.10 36.00 23.80 10.28
24 41.28 38.00 25.40 11.10
25 1.000 41.28 39.00 25.40 11.10
28 1.125 44.44 42.00 26.97 11.10
30 47.63 44.00 26.97 11.10
32 1.250 47.63 46.00 26.97 11.10
33 50.80 47.00 28.58 11.10
35 1.375 50.80 49.00 28.58 11.10
38 1.500 53.98 54.00 28.58 11.10
40 60.33 56.00 34.93 12.70
1.625 60.33 56.00 34.93 12.70
43 63.50 59.00 34.93 12.70
44 1.750 63.50 61.00 34.93 12.70
45 66.68 61.00 38.10 12.70
48 1.875 66.68 64.00 38.10 12.70
50 2.000 69.85 66.70 38.10 12.70
53 76.20 69.00 42.88 14.28
2.125 76.20 69.00 42.88 14.28
55 79.38 71.50 42.88 14.28
2.250 79.38 78.00 42.88 14.28
60 2.375 82.55 80.00 46.02 14.28
2.500 85.73 83.00 46.02 14.28
65 85.73 85.00 49.20 15.88
2.625 85.73 85.00 49.20 15.88
70 2.750 88.90 90.00 49.20 15.88
2.875 95.25 96.00 52.37 15.88
75 3.000 98.43 99.00 52.37 15.88
26
 flowserve.com

Elastomer Bellows

Pac-Seal P250
High performance, stainless steel encased elastomer
bellows seal design suitable for a wide variety of
applications. Seal design is fully compliant to EN
12756 (DIN 24960) L1K dimensions. Standard seat is
DIN boot mounted type B4. O-Ring mounted 4S DIN
short and 4L DIN long seats can be supplied.

Operating Parameters
Pressure up to 35 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P250 with Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
B4 Seat 4S Seat 4L Seat Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2 L1 + L2 L4 L5

ØD (mm) (B4/ 4S/ 4L) (B4/ 4S/ 4L) (L1K) (4L) (4L)
14 25.00 24.00 26.40 8.60 35.00 3.00 5.00
16 27.00 26.00 26.40 8.60 35.00 3.00 5.00
18 33.00 32.00 27.50 10.00 37.50 3.00 5.00
20 35.00 34.00 27.50 10.00 37.50 3.00 5.00
22 37.00 36.00 27.50 10.00 37.50 3.00 5.00
24 39.00 38.00 30.00 10.00 40.00 3.00 5.00
25 40.00 39.00 30.00 10.00 40.00 3.00 5.00
28 43.00 42.00 32.50 10.00 42.50 3.00 5.00
30 45.00 44.00 32.50 10.00 42.50 3.00 5.00
32 48.00 46.00 32.50 10.00 42.50 3.00 5.00
33 48.00 47.00 32.50 10.00 42.50 3.00 5.00
35 50.00 49.00 32.50 10.00 42.50 3.00 5.00
38 56.00 54.00 34.00 11.00 45.00 4.00 5.00
40 58.00 56.00 34.00 11.00 45.00 4.00 5.00
43 61.00 59.00 34.00 11.00 45.00 4.00 5.00
45 63.00 61.00 34.00 11.00 45.00 4.00 5.00
48 66.00 64.00 34.00 11.00 45.00 4.00 5.00
50 70.00 66.00 34.50 13.00 47.50 4.00 5.00
53 73.00 69.00 34.50 13.00 47.50 4.00 5.00
55 75.00 71.00 34.50 13.00 47.50 4.00 5.00
60 80.00 80.00 39.50 13.00 52.50 4.00 5.00
65 85.00 85.00 39.50 13.00 52.50 4.00 5.00
68 90.00 88.00 37.20 15.30 52.50 4.00 5.00
70 92.00 89.00 44.70 15.30 60.00 4.00 5.00
75 97.00 96.00 44.70 15.30 60.00 4.00 5.00
80 105.00 104.00 44.30 15.70 60.00 4.00 5.00
85 110.00 108.00 44.30 15.70 60.00 4.00 5.00
90 115.00 114.00 49.30 15.70 65.00 4.00 5.00
95 120.00 118.00 49.30 15.70 65.00 4.00 5.00
100 125.00 124.00 49.30 15.70 65.00 4.00 5.00

27
Elastomer Diaphragm

Pac-Seal P100 / P200

Resilient, elastomer diaphragm seal design. Seals are
suitable for bi-directional shaft rotation and available
in both metric and imperial sizes. Supplied with
standard boot mounted type B2 seat or centre O-Ring
mounted type 1H seat.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P100 / P200 with B2 and 1H Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*1H seat only)
Elastomers Nitrile, EPR, Viton B2 Seat 1H Seat

Shaft Size Shaft Size ØD1 ØD3 L1 L1 L2

ØD (mm) ØD (inches) (B2/1H) (P100/P200) (P100) (P200) (B2/ 1H)
10 0.375 24.60 21.80 43.66 25.40 8.74
12 / 13 0.500 27.79 23.50 43.66 25.40 8.74
14 / 15 / 16 0.625 30.95 27.00 43.66 25.40 10.32
18 / 19 0.750 34.15 30.70 43.66 25.40 10.32
20 35.70 33.40 43.66 25.40 10.32
22 0.875 37.30 33.40 43.66 25.40 10.32
24 / 25 40.50 39.20 43.66 25.40 10.32
1.000 40.50 43.20 43.66 25.40 10.32
28 / 29 1.125 47.63 45.60 60.33 33.34 11.99
30 / 32 1.250 50.80 47.40 60.33 33.34 11.99
33 / 34 /35 1.375 53.98 52.00 60.33 33.34 11.99
38 1.500 57.15 55.60 60.33 33.34 11.99
40 / 41 1.625 60.33 59.20 60.33 33.34 11.99
42 / 43 / 44 / 45 1.750 63.50 65.10 70.64 40.48 11.99
48 1.875 66.68 66.70 70.64 40.48 11.99
50 2.000 69.85 71.00 70.64 40.48 13.50
53 2.125 73.03 73.30 70.64 40.48 13.50
55 2.250 76.20 78.60 70.64 40.48 13.50
58 / 60 2.375 79.38 82.10 70.64 40.48 13.50
63 2.500 82.55 84.60 70.64 40.48 13.50
65 2.625 92.08 88.60 69.85 49.21 15.88
70 2.750 95.25 90.00 69.85 49.21 15.88
2.875 98.43 95.20 73.03 52.39 15.88
75 3.000 101.60 102.70 73.03 52.39 15.88
3.125 111.15 104.00 79.38 55.56 19.88
80 114.30 104.00 79.38 55.56 19.88
3.250 114.30 104.00 79.38 55.56 19.88
85 3.375 117.48 108.00 79.38 55.56 19.88
3.500 120.65 112.00 79.38 55.56 19.88
90 123.83 112.00 79.38 55.56 19.88
3.625 123.83 114.00 82.55 58.74 19.88
95 3.750 127.00 119.00 82.55 58.74 19.88
3.875 130.20 121.00 85.73 61.91 19.88
100 4.000 133.35 124.00 85.73 61.91 19.88
28
 flowserve.com

Elastomer Diaphragm

Pac-Seal P110 / P220

Resilient, elastomer diaphragm seal design. Seals are
suitable for bi-directional shaft rotation and available
in both metric and imperial sizes. Supplied with
standard boot mounted type B1 seat or centre O-Ring
mounted type 3H seat.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P110 / P220 with B1 and 3H Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*3H seat only)
B1 Seat 3H Seat Elastomers Nitrile, EPR, Viton

Shaft Size Shaft Size ØD1 ØD3 L1 L1 L2

ØD (mm) ØD (inches) (B1 / 3H) (P110 / P220) (P110) (P220) (B1 / 3H)
0.500 25.40 23.50 20.62 31.75 7.93
14 31.75 27.00 22.23 34.93 10.28
16 0.625 31.75 27.00 22.23 34.93 10.28
18 34.93 30.70 22.23 34.93 10.28
0.750 34.93 30.70 22.23 34.93 10.28
20 38.10 33.40 23.80 36.50 10.28
22 0.875 38.10 33.40 23.80 36.50 10.28
24 41.28 39.20 25.40 41.28 11.10
25 41.28 39.20 25.40 41.28 11.10
1.000 41.28 43.20 25.40 41.28 11.10
28 1.125 44.44 45.60 26.97 42.85 11.10
30 47.63 47.40 26.97 42.85 11.10
32 1.250 47.63 47.40 26.97 42.85 11.10
33 50.80 52.00 28.58 42.85 11.10
35 1.375 50.80 52.00 28.58 42.85 11.10
38 1.500 53.98 55.60 28.58 42.85 11.10
40 60.33 59.20 34.93 50.80 12.70
1.625 60.33 59.20 34.93 50.80 12.70
43 63.50 65.10 34.93 50.80 12.70
1.750 63.50 65.10 34.93 50.80 12.70
45 63.50 65.10 38.10 53.98 12.70
1.875 66.68 66.70 38.10 53.98 12.70
48 69.85 66.70 38.10 53.98 12.70
50 69.85 71.00 38.10 53.98 12.70
2.000 69.85 73.30 38.10 53.98 12.70
53 76.20 73.30 42.85 60.32 14.28
2.125 76.20 73.30 42.85 60.32 14.28
55 79.38 78.60 42.85 60.32 14.28
2.250 79.38 78.60 42.85 60.32 14.28
60 2.375 82.55 82.10 46.02 63.50 14.28
2.500 85.73 84.60 46.02 63.50 14.28
65 2.625 85.73 88.60 49.20 69.85 15.88
70 2.750 88.90 90.00 49.20 69.85 15.88
2.875 95.25 95.20 52.37 73.03 15.88
75 3.000 98.43 102.70 52.37 73.03 15.88
3.125 101.60 104.00 55.55 79.37 19.88
3.250 104.78 104.00 55.55 79.37 19.88
3.375 107.95 108.00 55.55 79.37 19.88
3.500 111.13 112.00 55.55 79.37 19.88
3.625 114.30 114.00 58.72 82.55 19.88
3.750 117.48 119.00 58.72 82.55 19.88
3.875 120.65 121.00 58.72 85.72 19.88
4.000 123.83 124.00 58.72 85.72 19.88
29
Elastomer Diaphragm

Pac-Seal P110U
Resilient, elastomer diaphragm seal design similar
to Pac-Seal type P110, but with reduced seal OD
to fit into standard ANSI seal chambers. Seals are
suitable for bi-directional shaft rotation. Supplied with
standard boot mounted type B1 seat or centre O-Ring
mounted type 3H seat.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P110U with B1 and 3H Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*3H seat only)
Elastomers Nitrile, EPR, Viton B1 Seat 3H Seat

Shaft Size ØD1 ØD3 L1 L2

ØD (inches) (B1/ 3H) (B1/ 3H)
0.500 25.40 22.80 20.62 7.93
0.625 31.75 27.00 22.23 10.28
0.750 34.93 30.40 22.23 10.28
0.875 38.10 33.40 23.80 10.28
1.000 41.28 39.30 25.40 11.10
1.125 44.44 41.90 26.97 11.10
1.250 47.63 45.40 26.97 11.10
1.375 50.80 49.30 28.58 11.10
1.500 53.98 52.50 28.58 11.10
1.625 60.33 55.50 34.93 12.70
1.750 63.50 61.00 34.93 12.70
1.875 66.68 64.00 38.10 12.70
2.000 69.85 65.70 38.10 12.70
2.125 76.20 70.50 42.85 14.28
2.250 79.38 80.00 42.85 14.28
2.375 82.55 79.60 46.02 14.28
2.500 85.73 81.50 46.02 14.28
2.625 85.73 87.30 49.20 15.88
2.750 88.90 90.00 49.20 15.88
3.000 98.43 96.80 52.37 15.88
3.125 101.60 104.00 55.55 19.88
3.250 104.78 104.00 55.55 19.88
3.375 107.95 108.00 55.55 19.88
3.500 111.13 112.00 55.55 19.88
3.625 114.30 114.00 58.72 19.88
3.750 117.48 119.00 58.72 19.88
3.875 120.65 121.00 58.72 19.88
4.000 123.83 124.00 58.72 19.88

30
 flowserve.com

Elastomer Diaphragm

Pac-Seal P240
Compact elastomer diaphragm seal design
conforming to EN 12756 (DIN 24960) L1K
dimensions. Seals are suitable for bi-directional shaft
rotation. P240 seals are supplied with a choice of boot
mounted DIN seat type B4, O-Ring mounted DIN short
4S and DIN long 4L seats with anti-rotation pin-slot.

Operating Parameters
Pressure up to 14 bar
Temperature -30 to 230°C
Speed up to 10 m/s
Actual performance limits depend on specific seal material, size,
P240 with Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
B4 Seat 4S Seat 4L Seat

Shaft Size ØD1 ØD3 L1 L2 L4 L5

ØD (mm) (B4/ 4S/ 4L) (B4/ 4S/ 4L) (4L) (4L)
12 23.00 21.70 23.90 8.60 3.00 5.00
14 25.00 24.40 26.40 8.60 3.00 5.00
16 27.00 27.00 26.40 8.60 3.00 5.00
18 33.00 30.60 27.50 10.00 3.00 5.00
20 35.00 33.40 27.50 10.00 3.00 5.00
22 37.00 33.40 27.50 10.00 3.00 5.00
24 39.00 37.80 30.00 10.00 3.00 5.00
25 40.00 39.20 30.00 10.00 3.00 5.00
28 43.00 42.10 32.50 10.00 3.00 5.00
30 45.00 44.00 32.50 10.00 3.00 5.00
32 48.00 45.60 32.50 10.00 3.00 5.00
33 48.00 45.60 32.50 10.00 3.00 5.00
35 50.00 49.30 32.50 10.00 3.00 5.00
38 56.00 52.70 34.00 11.00 4.00 5.00
40 58.00 55.70 34.00 11.00 4.00 5.00
43 61.00 58.60 34.00 11.00 4.00 5.00
45 63.00 61.00 34.00 11.00 4.00 5.00
48 66.00 64.00 34.00 11.00 4.00 5.00
50 70.00 66.10 34.50 13.00 4.00 5.00
53 73.00 70.60 34.50 13.00 4.00 5.00
55 75.00 70.60 34.50 13.00 4.00 5.00
58 78.00 80.00 39.50 13.00 4.00 5.00
60 80.00 80.00 39.50 13.00 4.00 5.00
63 83.00 82.10 39.50 13.00 4.00 5.00
65 85.00 85.00 39.50 13.00 4.00 5.00
68 90.00 90.00 37.20 15.30 4.00 5.00
70 92.00 90.00 44.70 15.30 4.00 5.00
75 97.00 96.80 44.70 15.30 4.00 5.00
80 105.00 104.00 44.30 15.70 4.00 5.00
85 110.00 108.00 44.30 15.70 4.00 5.00
90 115.00 111.00 49.30 15.70 4.00 5.00
95 120.00 119.00 49.30 15.70 4.00 5.00
100 125.00 124.00 49.30 15.70 4.00 5.00

31
Elastomer Diaphragm

Pac-Seal P300
Robust, hydraulically balanced and narrow profile
elastomer diaphragm seal design providing enhanced
seal capability and superior seal performance.
P300 seals are suitable for common European seal
housings. Supplied with boot mounted B2 type seat or
optional 1H type centre O-Ring mounted seat.

Operating Parameters
Pressure up to 28 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P300 with B2 and 1H Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*1H seat only)
Elastomers Nitrile, EPR, Viton B2 Seat 1H Seat

Shaft Size Shaft Size ØD1 ØD3 L1 L2

ØD (mm) ØD (inches) (B2/ 1H) (B2/ 1H)
12 0.500 27.79 23.90 43.66 8.74
14 30.95 27.07 43.66 10.32
16 0.625 30.95 27.07 43.66 10.32
18 34.15 30.25 43.66 10.32
19 0.750 34.15 30.25 43.66 10.32
20 35.70 33.42 43.66 10.32
22 0.875 37.30 33.42 43.66 10.32
24 40.50 38.10 43.66 10.32
25 1.000 40.50 38.10 43.66 10.32
28 1.125 47.63 41.28 60.33 11.99
30 50.80 46.00 60.33 11.99
32 1.250 50.80 46.00 60.33 11.99
33 53.98 48.68 60.33 11.99
35 1.375 53.98 48.68 60.33 11.99
38 1.500 57.15 51.85 60.33 11.99
40 60.33 58.10 60.33 11.99
1.625 60.33 58.10 60.33 11.99
43 63.50 61.67 70.64 11.99
45 1.750 63.50 61.67 70.64 11.99
48 1.875 66.68 64.84 70.64 11.99
50 2.000 69.85 68.01 70.64 13.50
53 73.03 72.02 70.64 13.50
2.125 73.03 72.02 70.64 13.50
55 76.20 75.30 70.64 13.50
2.250 76.20 75.30 70.64 13.50
60 2.375 79.38 78.37 70.64 13.50
63 2.500 82.55 81.54 70.64 13.50
65 2.625 92.08 86.22 69.85 15.88
70 2.750 95.25 89.40 69.85 15.88
2.875 98.43 92.57 73.03 15.88
75 3.000 101.60 95.75 73.03 15.88

32
 flowserve.com

Elastomer Diaphragm

Pac-Seal P320
Robust, hydraulically balanced and short working length
elastomer diaphragm seal design providing enhanced
seal capability and superior seal performance. P320
seals are suitable for common European seal housings.
Supplied with boot mounted B2 type seat or optional 1H
type centre O-Ring mounted seat.

Operating Parameters
Pressure up to 28 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
P320 with B2 and 1H Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*1H seat only)
B2 Seat 1H Seat Elastomers Nitrile, EPR, Viton

Shaft Size Shaft Size ØD1 ØD3 L1 L2

ØD (mm) ØD (inches) (B2/ 1H) (B2/ 1H)
12 0.500 27.79 30.20 25.40 8.74
13 27.79 30.20 25.40 8.74
14 30.95 33.37 25.40 10.32
15 30.95 33.37 25.40 10.32
16 0.625 30.95 33.37 25.40 10.32
18 34.15 36.55 25.40 10.32
19 0.750 34.15 36.55 25.40 10.32
20 35.70 39.72 25.40 10.32
22 0.875 37.30 39.72 25.40 10.32
24 40.50 44.30 25.40 10.32
25 1.000 40.50 44.30 25.40 10.32
28 1.125 47.63 49.07 33.34 11.99
30 50.80 53.40 33.34 11.99
32 1.250 50.80 53.40 33.34 11.99
33 53.98 57.58 33.34 11.99
35 1.375 53.98 57.58 33.34 11.99
38 1.500 57.15 60.75 33.34 11.99
40 60.33 67.40 33.34 11.99
1.625 60.33 67.40 33.34 11.99
43 63.50 71.97 40.48 11.99
45 1.750 63.50 71.97 40.48 11.99
48 1.875 66.68 75.14 40.48 11.99
50 2.000 69.85 78.31 40.48 13.50
53 73.03 82.72 40.48 13.50
2.125 73.03 82.72 40.48 13.50
55 76.20 86.00 40.48 13.50
2.250 76.20 86.00 40.48 13.50
60 2.375 79.38 89.00 40.48 13.50
63 2.500 82.55 92.24 40.48 13.50
65 2.625 92.08 97.92 49.21 15.88
70 2.750 95.25 101.10 49.21 15.88
2.875 98.43 105.27 52.39 15.88
75 3.000 101.60 108.45 52.39 15.88
33
Elastomer Diaphragm

Pac-Seal P340
Robust, hydraulically balanced and short working
length elastomer diaphragm seal design providing
enhanced seal capability and superior seal performance.
P340 seals are suitable for common American seal
housings. Supplied with boot mounted B1 type seat or
optional 3H type centre O-Ring mounted seat.

Operating Parameters
Pressure up to 28 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P340 with B1 and 3H Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*3H seat only)
Elastomers Nitrile, EPR, Viton B1 Seat 3H Seat

Shaft Size ØD1 ØD3 L1 L2

DØ (inches) (B1/ 3H) (B1/ 3H)
0.500 25.40 30.14 20.64 7.93
0.625 31.75 33.32 22.23 10.28
0.750 34.93 36.52 22.23 10.28
0.875 38.10 39.72 23.80 10.28
1.000 41.28 45.30 25.40 11.10
1.125 44.44 48.47 26.97 11.10
1.250 47.63 52.80 26.97 11.10
1.375 50.80 55.98 28.58 11.10
1.500 53.98 59.15 28.58 11.10
1.625 60.33 66.96 34.93 12.70
1.750 63.50 70.12 34.93 12.70
1.875 66.68 73.16 38.10 12.70
2.000 69.85 76.48 38.10 12.70
2.125 76.20 82.71 42.85 14.28
2.250 79.38 85.89 42.85 14.28
2.375 82.55 89.06 46.02 14.28
2.500 85.73 92.24 46.02 14.28
2.625 85.73 98.43 49.20 15.88
2.750 88.90 101.60 49.20 15.88
2.875 95.25 104.78 52.37 15.88
3.000 98.43 107.95 52.37 15.88

34
 flowserve.com

Elastomer Diaphragm

Pac-Seal P350
Robust, hydraulically balanced and narrow profile
elastomer diaphragm seal design providing enhanced
seal capability and superior seal performance.
P350 seals are suitable for common American seal
housings. Supplied with boot mounted B1 type seat or
optional 3H type centre O-Ring mounted seat.

Operating Parameters
Pressure up to 28 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
P350 with B1 and 3H Seat Options speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide.
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide, Ni-Resist*,
Stainless Steel* (*3H seat only)
B1 Seat 3H Seat Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (inches) (B1/ 3H) (B1/ 3H)
0.500 25.40 23.80 30.16 7.93
0.625 31.75 27.76 33.32 10.28
0.750 34.93 30.94 33.32 10.28
0.875 38.10 34.11 34.93 10.28
1.000 41.28 38.10 39.67 11.10
1.125 44.44 41.28 41.28 11.10
1.250 47.63 46.02 41.28 11.10
1.375 50.80 48.68 42.85 11.10
1.500 53.98 51.85 42.85 11.10
1.625 60.33 58.10 50.80 12.70
1.750 63.50 61.27 50.80 12.70
1.875 66.68 64.44 53.98 12.70
2.000 69.85 67.21 53.98 12.70
2.125 76.20 72.02 60.33 14.28
2.250 79.38 75.30 60.33 14.28
2.375 82.55 78.30 63.50 14.28
2.500 85.73 81.54 63.50 14.28
2.625 85.73 86.22 69.85 15.88
2.750 88.90 89.40 73.03 15.88
2.875 95.25 92.57 73.03 15.88
3.000 98.43 95.75 73.03 15.88

35
Wave Spring

Pac-Seal P167
Robust, sinusoidal wave spring seal design with set
screw drive offering superior performance for a wide
range of applications. Seal design conforms to EN
12756 (DIN 24960) L1K dimensions. P167 seal is
supplied with type 8L O-Ring mounted DIN long seat
having anti-rotation pin-slot as standard.

Operating Parameters
Pressure up to 25 bar
Temperature -30 to 180°C
Speed up to 20 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P167 with 8L Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Carbon, Silicon
Carbide, Tungsten Carbide
Elastomers Nitrile, EPR, Viton
8L Hard Seat 8L Carbon Seat

Shaft Size ØD1 ØD3 L1 L2 L1 + L2 L4 L5

ØD (mm) (L1K)
14 25.00 24.00 25.00 10.00 35.00 3.00 5.00
16 27.00 26.00 25.00 10.00 35.00 3.00 5.00
18 33.00 32.00 26.00 11.50 37.50 3.00 5.00
20 35.00 34.00 26.00 11.50 37.50 3.00 5.00
22 37.00 36.00 26.00 11.50 37.50 3.00 5.00
24 39.00 38.00 28.50 11.50 40.00 3.00 5.00
25 40.00 39.00 28.50 11.50 40.00 3.00 5.00
28 43.00 42.00 31.00 11.50 42.50 3.00 5.00
30 45.00 44.00 31.00 11.50 42.50 3.00 5.00
32 48.00 46.00 31.00 11.50 42.50 3.00 5.00
33 48.00 47.00 31.00 11.50 42.50 3.00 5.00
35 50.00 49.00 31.00 11.50 42.50 3.00 5.00
38 56.00 54.00 31.00 14.00 45.00 4.00 5.00
40 58.00 56.00 31.00 14.00 45.00 4.00 5.00
43 61.00 59.00 31.00 14.00 45.00 4.00 5.00
45 63.00 61.00 31.00 14.00 45.00 4.00 5.00
48 66.00 64.00 31.00 14.00 45.00 4.00 5.00
50 70.00 66.00 32.50 15.00 47.50 4.00 5.00
53 73.00 69.00 32.50 15.00 47.50 4.00 5.00
55 75.00 71.00 32.50 15.00 47.50 4.00 5.00
58 78.00 78.00 37.50 15.00 52.50 4.00 5.00
60 80.00 80.00 37.50 15.00 52.50 4.00 5.00
63 83.00 83.00 37.50 15.00 52.50 4.00 5.00
65 85.00 85.00 37.50 15.00 52.50 4.00 5.00
68 90.00 88.00 34.50 18.00 52.50 4.00 5.00
70 92.00 89.00 42.00 18.00 60.00 4.00 5.00
75 97.00 96.00 42.00 18.00 60.00 4.00 5.00
80 105.00 104.00 41.80 18.20 60.00 4.00 5.00
85 110.00 108.00 41.80 18.20 60.00 4.00 5.00
90 115.00 114.00 46.80 18.20 65.00 4.00 5.00
95 120.00 118.00 47.80 17.20 65.00 4.00 5.00
100 125.00 124.00 47.80 17.20 65.00 4.00 5.00
36
 flowserve.com

Wave Spring

Pac-Seal P167B
Balanced, sinusoidal wave spring seal design with set
screw drive offering superior performance for a wide
range of applications. P167B seal is supplied with type
8L O-Ring mounted DIN long seat having anti-rotation
pin-slot as standard.

Operating Parameters
Pressure up to 40 bar
Temperature -30 to 180°C
Speed up to 20 m/s
Actual performance limits depend on specific seal material, size,
P167B with 8L Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Carbon, Silicon
Carbide, Tungsten Carbide
Elastomers Nitrile, EPR, Viton
8L Hard Seat 8L Carbon Seat

Shaft & Seal ØD1 ØD2 ØD3 L1 L2 L4 L5

Size ØD (mm)
18 25.00 14 32.00 32.50 10.00 3.00 5.00
20 27.00 16 34.00 32.50 10.00 3.00 5.00
22 33.00 18 36.00 33.50 11.50 3.00 5.00
24 35.00 20 38.00 33.50 11.50 3.00 5.00
28 39.00 24 42.00 36.00 11.50 3.00 5.00
30 40.00 25 44.00 36.00 11.50 3.00 5.00
33 43.00 28 47.00 38.50 11.50 3.00 5.00
35 45.00 30 49.00 38.50 11.50 3.00 5.00
38 48.00 33 54.00 38.50 11.50 4.00 5.00
40 50.00 35 56.00 38.50 11.50 4.00 5.00
43 56.00 38 59.00 38.50 14.00 4.00 5.00
45 58.00 40 61.00 38.50 14.00 4.00 5.00
50 63.00 45 66.00 38.50 14.00 4.00 5.00
53 66.00 48 69.00 38.50 14.00 4.00 5.00
55 70.00 50 71.00 42.50 15.00 4.00 5.00
60 75.00 55 80.00 42.50 15.00 4.00 5.00
65 80.00 60 85.00 47.50 15.00 4.00 5.00

37
Wave Spring

Pac-Seal P168
Wave spring seal design with short working length,
narrow profile and set screwed seal drive. Used
extensively in rotary lobe pumps in food, process and
dairy applications. O-Ring mounted short seat type
6N is supplied as standard. DIN long 4L type seat with
anti-rotation pin-slot can be supplied.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 180°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P168 with 6N and 4L Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel, Tungsten Carbide
Stationary Seat Carbon, Tungsten Carbide
Elastomers Nitrile, EPR, Viton

6N Seat 4L Seat

Shaft Size Shaft Size ØD1 ØD1 ØD3 L1 L2 L2 L4 L5

ØD (mm) ØD (inches) (6N) (4L) (6N) (4L) (4L) (4L)
0.625 28.50 - 27.00 19.10 5.32 - - -
16 28.50 27.00 27.00 19.10 5.32 8.60 3.00 5.00
0.750 31.70 - 30.00 19.10 5.32 - - -
24 35.40 39.00 34.10 19.10 6.62 10.00 3.00 5.00
28 42.00 43.00 39.00 19.10 6.62 10.00 3.00 5.00
1.125 41.20 - 39.50 19.10 6.62 - - -
30 42.70 45.00 41.00 19.10 6.62 10.00 3.00 5.00
1.250 44.40 - 42.40 19.10 6.62 - - -
32 44.40 48.00 42.40 19.10 6.62 10.00 3.00 5.00
1.375 47.60 - 45.50 19.10 6.62 - - -
35 47.60 50.00 45.50 19.10 6.62 10.00 3.00 5.00
38 53.90 56.00 51.80 21.10 7.12 11.00 4.00 5.00
1.500 53.90 - 51.80 21.10 7.12 - - -
1.750 60.30 - 58.20 21.10 7.12 - - -
1.875 63.50 - 61.40 21.10 7.12 - - -
50 63.90 70.00 61.90 21.10 7.12 13.00 4.00 5.00
2.000 66.60 - 64.60 21.10 8.62 - - -
2.125 73.02 - 71.00 22.10 8.62 - - -
54 73.95 - 71.00 22.10 8.62 - - -
55 75.00 75.00 72.00 22.10 8.62 13.00 4.00 5.00
63 83.00 83.00 79.30 25.80 7.83 13.00 4.00 5.00
2.500 88.90 - 79.30 25.80 7.83 - - -
2.750 95.25 - 90.80 25.80 7.83 - - -
2.875 98.43 - 94.00 25.80 7.83 - - -
75 100.40 97.00 96.00 25.80 7.83 15.30 4.00 5.00
3.000 101.60 - 96.90 25.80 7.83 - - -
80 104.00 105.00 101.00 25.80 7.83 15.70 4.00 5.00
95 125.00 120.00 116.00 25.80 7.83 15.70 4.00 5.00
100 130.00 125.00 121.00 25.80 7.83 15.70 4.00 5.00

38
 flowserve.com

Wave Spring

Pac-Seal P168Y
Wave spring seal design with short working length,
narrow profile and set screwed seal drive. Used
extensively in positive displacement pumps in food,
process, dairy and brewery applications. O-Ring
mounted seat type 6Y with three flats is supplied as
standard.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P168Y with 6Y Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel , Tungsten Carbide
Stationary Seat Carbon, Tungsten Carbide
Elastomers Nitrile, EPR, Viton
6Y Seat
Shaft Size ØD1 ØD3 L1 L2
ØD (mm)
30.00 40.00 41.00 19.10 9.30
35.00 44.50 45.50 19.10 9.20
50.00 62.00 61.90 21.10 10.40
70.00 85.00 88.90 25.80 14.10
80.00 95.00 101.00 25.80 16.20

Pac-Seal P168W
Wave spring seal design with short working length,
narrow profile and set screwed seal drive. Used
extensively in rotary lobe pumps in food, process,
dairy and brewery applications. O-Ring mounted seat
type 6W with three anti-rotation pin-slots is supplied
as standard.

Operating Parameters
Pressure up to 12 bar
Temperature -30 to 230°C
Speed up to 15 m/s
Actual performance limits depend on specific seal material, size,
P168W with 6W Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Stainless Steel , Tungsten Carbide
Stationary Seat Carbon, Tungsten Carbide
6W Seat Elastomers Nitrile, EPR, Viton
Shaft Size ØD1 ØD3 L1 L2
ØD (mm)
20.00 30.00 31.00 19.10 10.70
30.00 41.30 41.00 19.10 10.90
35.00 46.95 45.50 19.10 12.20
45.00 58.26 58.20 21.10 11.60
55.00 69.55 72.00 22.10 13.00
75.00 92.15 96.00 25.80 14.50
39
Multi Spring

Pac-Seal P40
Robust and balanced, narrow profile multiple spring
O-Ring mounted seal. P40 is a high performance
and non-clogging, set screw driven seal design with
protected springs away from product. Seal is offered
with a choice of O-Ring DIN short 4S and DIN long 4L
seats for metric sizes and 3H seats for imperial sizes.

Operating Parameters
Pressure up to 30 bar
Temperature -30 to 180°C
Speed up to 25 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P40 with Seat Options
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicone Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
4S Seat 4L Seat 3H Seat

Shaft Size Shaft Size ØD1 ØD1 ØD3 L1 L2 L2 L4 L5

ØD (mm) ØD (inches) (4S/ 4L) (3H) (4S/ 4L) (3H) (4L) (4L)
18 33.00 - 32.50 30.00 10.00 - 3.00 5.00
0.750 - 34.93 33.50 30.00 - 10.28 - -
20 35.00 - 34.50 30.00 10.00 - 3.00 5.00
22 37.00 - 36.50 30.00 10.00 - 3.00 5.00
0.875 - 37.30 36.50 30.00 - 10.32 - -
24 39.00 - 38.50 30.00 10.00 - 3.00 5.00
25 40.00 - 39.60 30.00 10.00 - 3.00 5.00
1.000 - 41.28 39.60 30.00 - 11.10 - -
28 43.00 - 42.90 32.50 10.00 - 3.00 5.00
1.125 - 44.44 42.90 32.50 - 11.10 - -
30 45.00 - 44.50 32.50 10.00 - 3.00 5.00
1.250 - 47.63 46.00 32.50 - 11.10 - -
32 48.00 - 46.00 32.50 10.00 - 3.00 5.00
33 48.00 - 47.00 32.50 10.00 - 3.00 5.00
1.375 - 50.80 49.30 32.50 - 11.10 - -
35 50.00 - 49.30 32.50 10.00 - 3.00 5.00
38 56.00 - 52.80 34.00 11.00 - 4.00 5.00
1.500 - 53.98 52.80 34.00 - 11.10 - -
40 58.00 - 56.00 34.00 11.00 - 4.00 5.00
1.625 - 60.33 56.00 34.00 - 12.70 - -
43 61.00 - 59.00 34.00 11.00 - 4.00 5.00
1.750 - 63.50 59.00 34.00 - 12.70 - -
45 63.00 - 59.00 34.00 11.00 - 4.00 5.00
1.875 - 66.68 62.40 34.00 - 12.70 - -
48 66.00 - 62.40 34.00 11.00 - 4.00 5.00
50 70.00 - 65.60 34.50 13.00 - 4.00 5.00
2.000 - 69.85 65.60 34.50 - 12.70 - -
53 73.00 - 68.80 34.50 13.00 - 4.00 5.00
2.125 - 76.20 70.80 34.50 - 14.28 - -
55 75.00 - 70.80 34.50 13.00 - 4.00 5.00
2.250 - 79.38 71.90 34.50 - 14.28 - -
58 78.00 - 75.20 34.50 13.00 - 4.00 5.00
60 80.00 - 75.20 34.50 13.00 - 4.00 5.00
2.375 - 82.55 75.20 34.50 - 14.28 - -
63 83.00 - 78.30 34.50 13.00 - 4.00 5.00
2.500 - 85.73 78.30 34.50 - 14.28 - -
65 85.00 - 84.20 36.00 13.00 - 4.00 5.00
2.625 - 85.73 84.20 36.00 - 14.28 - -
2.750 - 88.90 87.40 36.00 - 15.88 - -
70 92.00 - 87.40 36.00 15.30 - 4.00 5.00
2.875 - 95.25 90.60 36.00 - 15.88 - -
75 97.00 - 93.70 36.00 15.30 - 4.00 5.00
3.000 - 98.43 93.70 36.00 - 15.88 - -
40
 flowserve.com

Special

Pac-Seal P118
Compact, enclosed elastomer bellows seal design
with a wide stationary seat configuration. Extremely
short working length makes P118 seal ideal for
equipment with limited axial space. Seal is supplied
with standard boot mounted B8 type stationary seat.

Operating Parameters
Pressure up to 5 bar
Temperature -30 to 230°C
Speed up to 12 m/s
Actual performance limits depend on specific seal material, size,
P118 with B8 Seat speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide,
Tungsten Carbide
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

Shaft Size ØD1 ØD3 L1 L2

ØD (mm)
8 26.00 24.00 11.00 8.00
10 26.00 24.00 11.00 8.00
11 26.00 24.00 11.00 8.00
12 26.00 24.00 11.00 8.00
13 26.00 24.00 13.00 8.00
14 35.00 32.00 13.00 8.00
15 38.00 35.00 13.00 8.00
16 38.00 35.00 13.00 8.00
17 42.00 39.00 13.00 8.00
18 42.00 39.00 13.00 8.00
19 42.00 39.00 13.00 8.00
20 42.00 39.00 13.00 8.00
22 45.00 42.00 13.00 10.00
23 50.00 47.00 14.00 10.00
24 50.00 47.00 14.00 10.00
25 50.00 47.00 14.00 10.00
27 50.00 47.00 15.00 10.00
28 57.00 54.00 15.00 10.00
30 57.00 54.00 15.00 10.00
32 57.00 54.00 15.00 10.00
35 63.00 60.00 16.00 10.00
38 68.00 65.00 17.00 12.00
40 68.00 65.00 17.00 12.00
45 73.00 70.00 20.00 12.00
50 88.00 85.00 23.00 15.00
55 88.00 85.00 23.00 15.00
60 110.00 105.00 30.00 15.00
65 110.00 105.00 30.00 15.00
70 110.00 105.00 32.00 15.00
41
Special

Pac-Seal P160
Compact and unitised, sleeve mounted elastomer
bellows seal design with elastomer shaft drive ring.
Popular seal for low pressure and general duties on
small shafts. Seal is supplied with standard boot
mounted B6 type seat.

Operating Parameters
Pressure up to 6 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P160 with B6 Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide
Stationary Seat Ceramic, Silicon Carbide
Elastomers Nitrile, EPR, Viton
B6 Seat
Shaft Size ØD1 ØD3 L1 L2
ØD (inches)
0.375 22.23 23.80 16.02 6.20
0.500 25.40 26.97 16.60 6.20
0.625 31.75 30.94 18.71 10.29
0.750 34.93 34.11 18.71 10.29
1.000 41.28 44.00 20.63 11.10

Pac-Seal P161
Compact and unitised, sleeve mounted elastomer
bellows seal design with elastomer shaft drive
ring. Similar to Pac-Seal P160, but to suit common
American housing dimensions. Popular seal for low
pressure and general duties on small shafts. Seal is
supplied with boot mounted B65 type seat.
Operating Parameters
Pressure up to 6 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits. P161 with B65 Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide
Stationary Seat Ceramic, Silicon Carbide
Elastomers Nitrile, EPR, Viton
B65 Seat
Shaft Size ØD1 ØD3 L1 L2
ØD (inches)
0.375 25.40 26.97 16.66 7.92
0.500 25.40 26.97 16.66 7.92
0.625 31.75 30.94 18.24 10.31
0.750 34.93 34.11 18.24 10.31
1.000 41.28 44.00 20.62 11.10
42
 flowserve.com

Special

Pac-Seal P170
Unitised stationary elastomer bellows seal design for
small coolant pump applications. Compact design
providing flexibility in shaft misalignment. Clearance
between shaft and seal parts allows one size of seal to
be used on several shaft sizes. Seal is supplied with
boot mounted B7 type seat.
Operating Parameters
Pressure up to 6 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
for any specific seal limits.
P170 with B7 Seat
Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide
Stationary Seat Ceramic, Silicon Carbide
Elastomers Nitrile, EPR, Viton
B7 Seat
Shaft Size ØD1 ØD3 ØD4 ØD5 L1 L2
ØD (inches)
0.500 25.00 28.56 14.00 31.70 13.20 5.00
0.625 31.00 36.45 18.00 41.27 14.80 5.00
0.750 35.00 40.00 21.00 43.70 15.50 5.00
1.125 48.00 52.00 32.00 57.15 19.00 8.00

Pac-Seal P171
Unitised stationary elastomer bellows seal design for
small coolant pump applications. Compact design
providing flexibility in shaft misalignment. Clearance
between shaft and seal parts allows one size of seal to
be used on several shaft sizes. Seal is supplied with
boot mounted B75 type seat.

Operating Parameters
Pressure up to 6 bar
Temperature -30 to 230°C
Speed up to 13 m/s
Actual performance limits depend on specific seal material, size,
speed, pressure and media. Consult your Flowserve representative
P171 with B75 Seat for any specific seal limits.

Materials of Construction
Metal Components Stainless Steel
Rotary Face Carbon, Silicon Carbide
Stationary Seat Ceramic, Silicon Carbide
Elastomers Nitrile, EPR, Viton
B75 Seat
Shaft Size ØD1 ØD3 ØD4 ØD5 L1 L2
ØD (inches)
0.500 25.40 28.56 14.10 31.70 13.79 7.93
0.625 31.75 36.45 17.10 41.27 15.36 10.31
0.750 34.93 40.00 20.15 43.70 15.36 10.31

43
Special

Pac-Seal P23
Stainless Steel set screwed locking collar (clamp ring)
for setting required seal working length.

Materials of Construction
Metal Components Stainless Steel

P23 Locking Collar

Shaft Size Shaft Size ØD1 L2 Number Shaft Size Shaft Size ØD1 L2 Number
ØD (mm) ØD (inches) of Grub ØD (mm) ØD (inches) of Grub
Screws Screws
10 0.375 19.00 7.50 3 x 120° 50 2.000 65.00 10.00 3 x 120°
12 0.500 21.00 7.50 3 x 120° 53 68.00 10.00 3 x 120°
14 23.00 7.50 3 x 120° 2.125 68.00 10.00 3 x 120°
15 24.00 7.50 3 x 120° 55 70.00 10.00 3 x 120°
16 0.625 25.00 7.50 3 x 120° 2.250 70.00 10.00 3 x 120°
18 31.00 7.50 3 x 120° 58 77.00 10.00 3 x 120°
0.750 31.00 7.50 3 x 120° 60 2.375 79.00 10.00 6 X 60°
20 33.00 7.50 3 x 120° 2.500 82.00 10.00 6 X 60°
22 0.875 35.00 7.50 3 x 120° 65 2.625 84.00 12.00 6 X 60°
24 37.00 7.50 3 x 120° 68 87.00 12.00 6 X 60°
25 1.000 38.00 10.00 3 x 120° 70 2.750 89.00 12.00 6 X 60°
28 1.125 41.00 10.00 3 x 120° 2.875 95.00 12.00 6 X 60°
30 43.00 10.00 3 x 120° 75 3.000 98.00 12.00 6 X 60°
32 1.250 45.00 10.00 3 x 120° 80 3.125 103.00 12.00 6 X 60°
33 46.00 10.00 3 x 120° 3.250 103.00 12.00 6 X 60°
35 1.375 48.00 10.00 3 x 120° 85 3.375 108.00 12.00 6 X 60°
38 1.500 53.00 10.00 3 x 120° 90 3.500 113.00 12.00 6 X 60°
40 55.00 10.00 3 x 120° 3.625 113.00 12.00 6 X 60°
1.625 55.00 10.00 3 x 120° 95 3.750 118.00 12.00 6 X 60°
43 58.00 10.00 3 x 120° 3.875 121.00 12.00 6 X 60°
45 1.750 60.00 10.00 3 x 120° 100 123.00 12.00 6 X 60°
48 1.875 63.00 10.00 3 x 120° 4.000 123.00 15.00 8 X 40°

44
 flowserve.com

Stationary Seats

Pac-Seal
Stationary Seat Options

45
Stationary Seats

Pac-Seal 8N / 8B / 2N / 2D / 3N / 3D / 9N
Pac-Seal O-Ring mounted standard stationary seat
designs to suit various housings and working length
dimensions.

Materials of Construction
Stationary Seat Carbon*, Ceramic, Silicon Carbide,
Tungsten Carbide (*Not 8N)
Elastomers Nitrile, EPR, Viton

8N / 8B / 2N / 2D / 3N / 3D / 9N Seat

8N /8B /2N /2D /3N /3D Seat 9N Seat

Shaft Shaft ØD1 L2 ØD1 L2 ØD1 L2 ØD1 L2 ØD1 L2 ØD1 L2 ØD1 L2 L4 L5

Size ØD Size ØD (8N) (8N) (8B) (8B) (2N) (2N) (2D) (2D) (3N) (3N) (3D) (3D) (9N) (9N) (9N) (9N)
(mm) (inches)
10 19.20 6.60 19.20 7.10 18.10 5.50 21.00 7.00 18.10 5.50 21.00 7.00 - - 4.00 4.00
11 - - - - 20.60 5.50 - - 20.60 5.50 - - - - 4.00 4.00
12 21.60 5.60 21.60 7.60 20.60 5.50 23.00 7.00 20.60 5.50 23.00 7.00 - - 4.00 4.00
13 - - - - 23.10 6.00 - - 23.10 6.00 - - - - 4.00 4.00
14 24.60 5.60 24.60 7.60 23.10 6.00 25.00 7.00 23.10 6.00 25.00 7.00 - - 4.00 4.00
15 24.60 6.60 24.60 8.60 26.90 7.00 - - 26.90 7.00 - - - - 4.00 4.00
16 0.625 28.00 7.50 28.00 9.00 26.90 7.00 27.00 7.00 26.90 7.00 27.00 7.00 28.57 9.00 4.00 4.00
17 - - - - 26.90 7.00 - - 26.90 7.00 - - - - 4.00 4.00
18 30.00 8.00 30.00 10.00 30.90 8.00 33.00 10.00 30.90 8.00 33.00 10.00 - - 4.00 4.00
19 0.750 31.00 7.50 31.00 9.00 30.90 8.00 - - 30.90 8.00 - - 31.75 9.00 4.00 4.00
20 35.00 7.50 35.00 9.50 30.90 8.00 35.00 10.00 30.90 8.00 35.00 10.00 33.32 9.00 4.00 4.00
21 - - - - 35.40 8.00 - - 35.40 8.00 - - - - 4.00 4.00
22 0.875 35.00 7.50 35.00 9.50 35.40 8.00 37.00 10.00 35.40 8.00 37.00 10.00 34.93 9.00 4.00 4.00
23 - - - - 35.40 8.00 - - 35.40 8.00 - - - - 4.00 4.00
24 38.00 7.50 38.00 9.50 35.40 8.00 39.00 10.00 35.40 8.00 39.00 10.00 - - 4.00 4.00
25 1.000 38.00 7.50 38.00 9.50 38.20 8.50 40.00 10.00 38.20 8.50 40.00 10.00 39.85 10.00 4.00 4.00
26 40.00 8.00 40.00 10.00 38.20 8.50 - - - - - - - - 4.00 4.00
28 42.00 9.00 42.00 11.00 43.30 9.00 43.00 10.00 43.30 9.00 43.00 10.00 43.05 10.00 4.00 4.00
1.125 43.05 10.00 4.00 4.00
30 45.00 10.50 45.00 11.00 43.30 9.00 45.00 10.00 43.30 9.00 45.00 10.00 44.63 10.00 4.00 4.00
32 1.250 48.00 10.50 48.00 11.00 43.30 9.00 48.00 10.00 43.30 9.00 48.00 10.00 46.32 10.00 4.00 4.00
33 50.00 11.00 - - 53.50 11.50 48.00 10.00 53.50 9.00 48.00 10.00 - - 4.00 4.00
35 1.375 52.00 11.00 52.00 11.50 53.50 11.50 50.00 10.00 53.50 11.50 50.00 10.00 49.48 10.00 4.00 4.00
38 1.500 55.00 10.30 55.00 11.50 60.50 11.50 56.00 13.00 60.50 11.50 56.00 13.00 52.56 10.00 4.00 4.00
40 58.00 10.80 58.00 11.50 60.50 11.50 58.00 13.00 60.50 11.50 58.00 13.00 54.25 10.00 4.00 4.00
1.625 55.83 10.00 4.00 4.00
42 62.00 12.00 62.00 14.30 60.50 11.50 - - - - - - 55.83 10.00 4.00 4.00
43 62.00 12.00 62.00 14.30 60.50 11.50 61.00 13.00 - - - - - - 4.00 4.00
44 - - - - 65.50 11.50 - - - - - - 59.02 10.00 4.00 4.00
45 1.750 64.00 11.60 64.00 14.30 65.50 11.50 63.00 13.00 - - - - 59.02 10.00 4.00 4.00
48 1.875 68.40 11.60 68.40 14.30 65.50 11.50 66.00 13.00 - - - - - - 4.00 4.00
50 69.30 11.60 69.30 14.30 72.50 11.50 70.00 14.00 - - - - 65.37 10.00 4.00 4.00
2.000 66.85 10.00 4.00 4.00
53 - - - - - - 73.00 14.00 - - - - - - 4.00 4.00
2.125 70.03 10.00 4.00 4.00
55 75.40 13.30 75.40 15.30 72.50 11.50 75.00 14.00 - - - - 70.03 10.00 4.00 4.00
58 78.40 13.30 78.40 15.30 - - 78.00 14.00 - - - - - - 4.00 4.00
2.250 73.20 10.00 4.00 4.00
60 2.375 80.40 13.30 80.40 15.30 79.30 11.50 80.00 14.00 - - - - 76.38 10.00 4.00 4.00
63 - - - - - - 83.00 14.00 - - - - - - 4.00 4.00
2.500 79.56 10.00 4.00 4.00
65 85.40 13.00 85.40 15.30 84.50 11.50 85.00 14.00 - - - - 81.23 10.00 4.00 4.00
68 91.50 13.70 91.50 16.00 - - 90.00 16.00 - - - - - - 4.00 4.00
2.625 82.73 10.00 4.00 4.00
70 2.750 92.00 13.00 92.00 15.30 89.50 11.50 92.00 16.00 - - - - 85.90 10.00 4.00 4.00
2.875 89.08 10.00 4.00 4.00
75 99.00 14.00 99.00 15.30 94.50 11.50 97.00 16.00 - - - - 90.77 10.00 4.00 4.00
3.000 95.43 10.00 4.00 4.00
80 104.00 15.00 104.00 16.30 99.50 11.50 105.00 18.00 - - - - 100.29 10.00 4.00 4.00
3.250 101.78 10.00 4.00 4.00
85 3.375 109.00 14.80 - - 105.50 13.50 110.00 18.00 - - - - 104.77 10.00 4.00 4.00
90 3.500 114.00 14.80 - - 111.50 13.50 115.00 18.00 - - - - 109.82 10.00 4.00 4.00
95 120.30 15.80 - - 116.50 13.50 120.00 18.00 - - - - 114.30 10.00 4.00 4.00
100 4.000 123.30 15.80 - - 119.50 13.50 125.00 18.00 - - - - 119.33 10.00 4.00 4.00
46
 flowserve.com

Stationary Seats

Pac-Seal 8S / 8L
O-Ring mounted stationary seats to suit DIN housing
sizes. Seats are designed to provide different axial
length dimensions for achieving required seal working
lengths. 8S is DIN short seat and 8L is DIN long seat
with pin-slot feature. Commonly used with Pac-Seal
P140 and P190 series seals.

Materials of Construction
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

8S / 8L Seat

8S Seat 8L Seat

Shaft Size ØD1 ØD4 L2 L2 L4 L5

ØD (mm) (8S/8L) (8S/8L) (8S) (8L) (8L) (8L)
10 21.00 16.42 6.60 10.00 3.00 5.00
12 23.00 18.42 6.60 10.00 3.00 5.00
14 25.00 20.42 6.60 10.00 3.00 5.00
16 27.00 22.42 6.60 10.00 3.00 5.00
18 33.00 26.60 7.50 11.50 3.00 5.00
20 35.00 28.60 7.50 11.50 3.00 5.00
22 37.00 30.60 7.50 11.50 3.00 5.00
24 39.00 32.60 7.50 11.50 3.00 5.00
25 40.00 33.60 7.50 11.50 3.00 5.00
28 43.00 36.60 7.50 11.50 3.00 5.00
30 45.00 38.60 7.50 11.50 3.00 5.00
32 48.00 41.60 7.50 11.50 3.00 5.00
33 48.00 41.60 7.50 11.50 3.00 5.00
35 50.00 43.80 7.50 11.50 3.00 5.00
38 56.00 48.80 9.00 14.00 4.00 5.00
40 58.00 50.80 9.00 14.00 4.00 5.00
43 61.00 53.80 9.00 14.00 4.00 5.00
45 63.00 55.80 9.00 14.00 4.00 5.00
48 66.00 58.80 9.00 14.00 4.00 5.00
50 70.00 61.25 9.50 15.00 4.00 5.00
53 73.00 64.25 11.00 15.00 4.00 5.00
55 75.00 66.25 11.00 15.00 4.00 5.00
58 78.00 69.25 11.00 15.00 4.00 5.00
60 80.00 71.25 11.00 15.00 4.00 5.00
63 83.00 74.25 11.00 15.00 4.00 5.00
65 85.00 76.25 11.00 15.00 4.00 5.00
68 90.00 80.50 11.30 18.00 4.00 5.00
70 92.00 82.60 11.30 18.00 4.00 5.00
75 97.00 87.60 11.30 18.00 4.00 5.00
80 105.00 94.70 12.00 18.20 4.00 5.00
85 110.00 99.70 14.00 18.20 4.00 5.00
90 115.00 104.70 14.00 18.20 4.00 5.00
95 120.00 109.70 14.00 17.20 4.00 5.00
100 125.00 114.70 14.00 17.20 4.00 5.00
47
Stationary Seats

Pac-Seal 4S / 4L
O-Ring mounted stationary seats to suit DIN housing
sizes and offering alternative axial length dimensions
to Pac-Seal 8S/8L stationary seats. 4S is DIN short
seat and 4L is DIN long seat with anti-rotation pin-slot
feature. Widely used with Pac-Seal P40, P240 and
P250 seal designs.

Materials of Construction
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

4S / 4L Seat

4S Seat 4L Seat

Shaft Size ØD1 ØD4 L2 L4 L5

ØD (mm) (4S/4L) (4S/4L) (4S/4L) (4L) (4L)
10 21.00 16.42 8.60 3.00 5.00
12 23.00 18.42 8.60 3.00 5.00
14 25.00 20.42 8.60 3.00 5.00
16 27.00 22.42 8.60 3.00 5.00
18 33.00 26.60 10.00 3.00 5.00
20 35.00 28.60 10.00 3.00 5.00
22 37.00 30.60 10.00 3.00 5.00
24 39.00 32.60 10.00 3.00 5.00
25 40.00 33.60 10.00 3.00 5.00
28 43.00 36.60 10.00 3.00 5.00
30 45.00 38.60 10.00 3.00 5.00
32 48.00 41.60 10.00 3.00 5.00
33 48.00 41.60 10.00 3.00 5.00
35 50.00 43.80 10.00 3.00 5.00
38 56.00 48.80 11.00 4.00 5.00
40 58.00 50.80 11.00 4.00 5.00
43 61.00 53.80 11.00 4.00 5.00
45 63.00 55.80 11.00 4.00 5.00
48 66.00 58.80 11.00 4.00 5.00
50 70.00 61.25 13.00 4.00 5.00
53 73.00 64.25 13.00 4.00 5.00
55 75.00 66.25 13.00 4.00 5.00
58 78.00 69.25 13.00 4.00 5.00
60 80.00 71.25 13.00 4.00 5.00
63 83.00 74.25 13.00 4.00 5.00
65 85.00 76.25 13.00 4.00 5.00
68 90.00 80.50 15.30 4.00 5.00
70 92.00 82.60 15.30 4.00 5.00
75 97.00 87.60 15.30 4.00 5.00
80 105.00 94.70 15.70 4.00 5.00
85 110.00 99.70 15.70 4.00 5.00
90 115.00 104.70 15.70 4.00 5.00
95 120.00 109.70 15.70 4.00 5.00
100 125.00 114.70 15.70 4.00 5.00
48
 flowserve.com

Stationary Seats

Pac-Seal 1H / 3H
Centre O-Ring mounted, H configuration stationary
seat. Short working length seat design providing
optional anti-rotation pin-slot feature. 1H seat is
to suit popular European housings and 3H to suit
common American housings.

Materials of Construction
Stationary Seat Ceramic, Stainless Steel,
Ni-Resist, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton
1H / 3H Seat

Shaft Size Shaft Size ØD1 L2 L3 Slot Width ØD1 L2 L3 Slot Width
ØD (mm) ØD (inches) (1H) (1H) (1H) (1H) (3H) (3H) (3H) (3H)
10 0.375 24.60 8.74 1.60 4.00 20.62 7.93 1.60 4.00
12 27.79 8.74 1.60 4.00 - - - -
0.500 27.79 8.74 1.60 4.00 25.40 7.93 1.60 4.00
16 0.625 30.95 10.32 2.00 4.00 31.75 10.28 2.00 4.00
18 34.15 10.32 2.00 4.00 - - - -
19 0.750 34.15 10.32 2.00 4.00 34.93 10.28 2.00 4.00
20 35.70 10.32 2.00 4.00 - - - -
22 0.875 37.30 10.32 2.00 4.00 37.30 10.32 2.00 4.00
25 1.000 40.50 10.32 2.00 4.00 41.28 11.10 2.00 4.00
28 47.63 11.99 2.35 4.50 - - - -
1.125 47.63 11.99 2.35 4.50 44.44 11.10 2.35 4.50
30 50.80 11.99 2.35 4.50 - - - -
32 1.250 50.80 11.99 2.35 4.50 47.63 11.10 2.35 4.50
33 53.98 11.99 2.35 4.50 - - - -
35 1.375 53.98 11.99 2.35 4.50 50.80 11.10 2.35 4.50
38 1.500 57.15 11.99 2.35 4.50 53.98 11.10 2.35 4.50
40 60.33 11.99 2.35 4.50 - - - -
1.625 60.33 11.99 2.35 4.50 60.33 12.70 2.35 4.50
43 63.50 11.99 2.35 4.50 - - - -
45 1.750 63.50 11.99 2.35 4.50 63.50 12.70 2.35 4.50
48 1.875 66.68 11.99 2.35 4.50 66.68 12.70 2.35 4.50
50 69.85 13.50 2.35 4.50 - - - -
2.000 69.85 13.50 2.35 4.50 69.85 12.70 2.35 4.50
53 73.03 13.50 2.35 4.50 - - - -
2.125 73.03 13.50 2.35 4.50 76.20 14.28 2.35 4.50
55 76.20 13.50 2.35 4.50 - - - -
2.250 76.20 13.50 2.35 4.50 79.38 14.28 2.35 4.50
60 2.375 79.38 13.50 2.35 4.50 82.55 14.28 2.35 4.50
2.500 82.55 13.50 2.35 4.50 85.73 14.28 2.35 4.50
65 92.08 15.88 2.75 5.50 - - - -
2.625 92.08 15.88 2.75 5.50 85.73 14.28 2.75 5.50
70 2.750 95.25 15.88 2.75 5.50 88.90 15.88 2.75 5.50
2.875 98.43 15.88 2.75 5.50 95.25 15.88 2.75 5.50
75 101.60 15.88 2.75 5.50 - - - -
3.000 101.60 15.88 2.75 5.50 98.43 15.88 2.75 5.50
80 3.125 111.13 19.88 3.70 5.50 101.60 19.88 3.70 5.50
3.250 114.30 19.88 3.70 7.00 104.78 19.88 3.70 7.00
85 3.375 117.48 19.88 3.70 7.00 107.95 19.88 3.70 7.00
90 3.500 120.65 19.88 3.70 7.00 111.13 19.88 3.70 7.00
3.625 123.83 19.88 3.70 7.00 114.30 19.88 3.70 7.00
95 3.750 127.00 19.88 3.70 7.00 117.48 19.88 3.70 7.00
3.875 130.17 19.88 3.70 7.00 - - - -
100 4.000 133.35 19.88 3.70 7.00 123.83 19.88 3.70 7.00
49
Stationary Seats

Pac-Seal B1 / B2 / B3 / B4 / B5 / B9
Pac-Seal boot mounted standard stationary seat
designs to suit various housings and working length
dimensions.

Materials of Construction
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

B1 / B2 / B3 / B4 / B5 / B9 Seat

Shaft Size Shaft Size ØD1 L2 ØD1 L2 ØD1 L2 ØD1 L2

ØD (mm) ØD (inches) (B1/B3) (B1/B3) (B2/B5) (B2/B5) (B9) (B9) (B4) (B4)
0.375 22.23 7.93 24.60 8.74 - - - -
10 22.23 7.93 24.60 8.74 21.00 6.60 21.00 8.60
12 25.40 7.93 27.79 8.74 23.00 6.60 23.00 8.60
13 0.500 25.40 7.93 27.79 8.74 - - - -
14 31.75 10.28 30.95 10.32 25.00 6.60 25.00 8.60
15 - - 30.95 10.32 27.00 6.60 27.00 8.60
0.625 31.75 10.28 30.95 10.32 - - - -
16 31.75 10.28 30.95 10.32 27.00 6.60 27.00 8.60
18 34.93 10.28 34.15 10.32 33.00 7.50 33.00 10.00
0.750 34.93 10.28 34.15 10.32 - - - -
20 38.10 10.28 35.70 10.32 35.00 7.50 35.00 10.00
22 38.10 10.28 37.30 10.32 37.00 7.50 37.00 10.00
0.875 38.10 10.28 37.30 10.32 - - - -
24 41.28 11.10 40.50 10.32 39.00 7.50 39.00 10.00
25 41.28 11.10 40.50 10.32 40.00 7.50 40.00 10.00
1.000 41.28 11.10 40.50 10.32 - - - -
28 44.44 11.10 47.63 11.99 43.00 7.50 43.00 10.00
1.125 44.44 11.10 47.63 11.99 - - - -
30 47.63 11.10 50.80 11.99 45.00 7.50 45.00 10.00
1.250 47.63 11.10 50.80 11.99 - - - -
32 47.63 11.10 50.80 11.99 48.00 7.50 48.00 10.00
33 47.63 11.10 53.98 11.99 48.00 7.50 48.00 10.00
35 1.375 50.80 11.10 53.98 11.99 50.00 7.50 50.00 10.00
38 1.500 53.98 11.10 57.15 11.99 56.00 9.00 56.00 11.00
40 60.33 12.70 60.33 11.99 58.00 9.00 58.00 11.00
1.625 60.33 12.70 60.33 11.99 - - - -
43 63.50 12.70 63.50 11.99 61.00 9.00 61.00 11.00
1.750 63.50 12.70 63.50 11.99 - - - -
45 66.68 12.70 63.50 11.99 63.00 9.00 63.00 11.00
1.875 66.68 12.70 66.68 11.99 - - - -
48 69.85 12.70 66.68 11.99 66.00 9.00 66.00 11.00
50 69.85 12.70 69.85 13.50 70.00 9.50 70.00 13.00
2.000 69.85 12.70 69.85 13.50 - - - -
53 76.20 14.28 76.20 13.50 73.00 11.00 73.00 13.00
2.125 76.20 14.28 73.03 13.50 - - - -
55 76.20 14.28 76.20 13.50 75.00 11.00 75.00 13.00
2.250 79.38 14.28 76.20 13.50 - - - -
58 82.55 14.28 79.38 13.50 78.00 11.00 78.00 13.00
60 82.55 14.28 79.38 13.50 80.00 11.00 80.00 13.00
2.375 82.55 14.28 79.38 13.50 - - - -
63 85.73 14.28 82.55 13.50 - - 83.00 13.00
2.500 85.73 14.28 82.55 13.50 - - - -
65 85.73 15.88 92.08 15.88 85.00 11.00 85.00 13.00
2.625 85.73 15.88 92.08 15.88 - - - -
2.750 88.90 15.88 95.25 15.88 - - - -
70 88.90 15.88 95.25 15.88 92.00 11.30 92.00 15.30
2.875 95.25 15.88 98.43 15.88 - - - -
75 98.43 15.88 101.60 15.88 97.00 11.30 97.00 15.30
3.000 98.43 15.88 101.60 15.88 - - - -
3.125 101.60 19.88 111.13 19.88 - - - -
80 - - 114.30 19.88 105.00 12.00 105.00 15.70
3.250 104.78 19.88 114.30 19.88 - - - -
85 - - 117.48 19.88 110.00 14.00 110.00 15.70
3.375 107.95 19.88 117.48 19.88 - - - -
3.500 111.13 19.88 120.65 19.88 - - - -
90 - - 123.83 19.88 115.00 14.00 115.00 15.70
3.625 114.30 19.88 123.83 19.88 - - - -
95 - - 127.00 19.88 120.00 14.00 120.00 15.70
3.750 117.48 19.88 127.00 19.88 - - - -
3.875 120.65 19.88 130.17 19.88 - - - -
100 - - 133.35 19.88 125.00 14.00 125.00 15.70
4.000 123.83 19.88 133.35 19.88 - - - -
50
 flowserve.com

Stationary Seats

Pac-Seal 5V
Clamped style stationary seat design. Seats are
supplied as standard with two PTFE flat gaskets.

Materials of Construction
Stationary Seat Ceramic, Silicon Carbide,
Tungsten Carbide
Seat Gasket PTFE

5V Seat

Shaft Size Shaft Size Ød1 ØD2 ØD3 L2 L3

ØD (mm) ØD (inches)
12 0.500 29.05 13.70 39.70 7.90 17.40
15 31.90 16.00 41.00 7.90 17.40
16 0.625 33.04 16.80 43.69 7.90 17.40
19 0.750 36.21 20.00 46.50 7.90 17.40
20 36.90 21.00 47.00 7.90 17.40
22 0.875 39.39 23.20 49.50 7.90 17.40
25 41.90 26.00 52.00 7.90 17.40
1.000 42.56 26.40 52.50 7.90 17.40
28 1.125 45.74 29.60 58.50 11.10 26.90
30 48.69 31.00 58.75 11.10 26.90
1.250 50.50 32.70 63.50 11.10 26.90
33 52.30 34.00 65.00 11.10 26.90
35 1.375 53.68 36.00 65.50 11.10 26.90
38 1.500 56.85 39.10 69.50 11.10 26.90
40 61.90 41.00 75.00 11.10 26.90
1.625 63.20 42.20 76.50 11.10 26.90
1.750 66.38 45.40 79.50 11.10 26.90
45 66.90 46.00 80.00 11.10 26.90
48 1.875 69.55 49.00 82.50 11.10 26.90
50 71.90 51.00 85.00 11.10 26.90
2.000 72.73 51.80 85.50 11.10 26.90
2.125 79.08 54.90 95.50 14.30 33.33
55 79.90 56.00 96.00 14.30 33.33
2.250 82.25 58.10 98.50 14.30 33.33
60 84.90 61.00 101.00 14.30 33.33
2.375 85.43 61.30 101.50 14.30 33.33
2.500 88.60 64.50 104.50 14.30 33.33
65 89.90 66.00 106.00 14.30 33.33
2.625 91.78 67.60 108.50 14.30 33.33
70 2.750 94.90 71.00 111.00 14.30 33.33
2.875 98.13 74.00 114.50 14.30 33.33
75 99.90 76.00 116.00 14.30 33.33
3.000 99.71 77.20 115.50 14.30 33.33
3.125 102.89 80.40 119.50 14.30 33.33
80 104.90 81.00 121.00 14.30 33.33
3.250 107.50 83.70 123.50 14.30 34.30
85 109.90 86.00 126.00 14.30 34.30
3.375 110.85 86.90 127.50 14.30 34.30
3.500 114.00 89.90 130.50 14.30 34.30
90 114.50 91.00 130.50 14.30 34.30
3.625 117.10 93.30 133.50 14.30 34.30
95 119.90 96.00 136.00 14.30 34.30
3.750 120.35 96.30 136.50 14.30 34.30
100 124.90 101.00 141.00 14.30 34.30
4.000 126.70 102.60 142.50 14.30 34.30
4.250 133.05 109.00 149.50 14.30 34.30
4.500 139.40 115.30 155.50 14.30 34.30
5.000 164.80 128.00 187.50 16.00 36.00
5.500 177.50 140.70 200.50 16.00 36.00

51
Stationary Seats

Pac-Seal 3P
Push-fit type block seat design featuring monolithic
stationary ring with O-Ring installed in a radial groove
above the stationary ring.

Materials of Construction
Stationary Seat Silicon Carbide, Ni-Resist,
Tungsten Carbide
Elastomers Nitrile, EPR, Viton

3P Seat

Shaft Size ØD1 ØD2 ØD4 Pin P.C.D Pin Ø L2 L3 O-Ring Size
ØD (inches)
0.500 25.30 13.80 19.80 2.50 7.90 2.50 BS214
0.625 31.65 16.98 24.20 2.50 10.30 2.50 BS218
0.750 34.82 20.15 27.75 2.50 10.30 2.50 BS220
0.875 38.00 23.33 31.00 2.50 10.30 2.50 BS222
1.000 41.18 26.50 34.10 2.50 11.15 2.50 BS223
1.125 44.35 30.08 37.30 2.50 11.15 2.50 BS224
1.250 47.53 33.25 40.50 2.50 11.15 2.50 BS225
1.375 50.70 36.43 43.60 2.50 11.15 2.50 BS226
1.500 53.88 39.60 46.80 2.50 11.15 2.50 BS227
1.625 60.23 42.78 51.60 4.00 12.75 3.00 BS229
1.750 63.40 45.95 54.80 4.00 12.75 3.00 BS230
1.875 66.58 49.13 57.90 4.00 12.75 3.00 BS231
2.000 69.75 52.30 61.10 4.00 12.75 3.00 BS232
2.125 76.10 55.48 65.90 5.00 14.33 3.50 BS234
2.250 79.28 58.65 69.00 5.00 14.33 3.50 BS235
2.375 82.45 61.83 72.20 5.00 14.33 3.50 BS236
2.500 85.63 65.00 75.40 5.00 14.33 3.50 BS237
2.625 85.63 68.18 77.00 5.00 15.93 3.50 BS237
2.750 88.80 71.35 80.20 5.00 15.93 3.50 BS238
2.875 95.15 74.53 84.90 5.00 15.93 3.50 BS240
3.000 98.33 77.70 88.10 5.00 15.93 3.50 BS241
3.125 101.50 81.92 91.30 5.00 19.84 3.50 BS242
3.250 104.68 85.10 94.40 5.00 19.84 3.50 BS243
3.375 107.85 88.27 97.60 5.00 19.84 3.50 BS244
3.500 111.03 91.44 100.80 5.00 19.84 3.50 BS245
3.625 114.20 94.62 104.00 5.00 19.84 3.50 BS246
3.750 117.38 97.79 107.10 5.00 19.84 3.50 BS247
3.875 120.55 100.97 110.30 5.00 19.84 3.50 BS248
4.000 123.73 104.14 113.50 5.00 19.84 3.50 BS249

52
 flowserve.com

Stationary Seats

Pac-Seal 5A
“L” shaped stationary seat design to suit popular
American seal housings. Supplied with PTFE gasket
and anti-rotation pin-slot feature.

Materials of Construction
Stationary Seat Ceramic, Ni-Resist, Silicon
Carbide, Tungsten Carbide
Seat Gasket PTFE

5A Seat

Shaft Size ØD1 ØD2 ØD4 Pin P.C.D Pin Ø L2 L3

ØD (inches)
0.750 34.93 20.12 23.81 2.00 10.28 4.00
0.875 38.10 23.33 26.99 2.00 10.28 4.00
1.000 41.28 26.50 30.15 2.00 11.10 4.10
1.125 44.44 30.08 33.35 2.00 11.10 4.10
1.250 47.63 33.25 36.50 2.00 11.10 4.10
1.375 50.80 36.43 39.70 2.00 11.10 4.10
1.500 53.98 39.60 42.85 2.00 11.10 4.10
1.625 60.33 42.78 47.63 3.00 12.70 4.20
1.750 63.50 45.95 50.80 3.00 12.70 4.20
1.875 66.68 49.13 53.98 3.00 12.70 4.20
2.000 69.85 52.30 57.15 3.00 12.70 4.20
2.125 76.20 55.48 60.33 3.00 14.28 4.50
2.250 79.38 58.65 63.50 3.00 14.28 4.50
2.375 82.55 61.93 66.68 3.00 14.28 4.50
2.500 85.73 65.00 69.85 3.00 14.28 4.50
2.625 85.73 68.18 73.03 3.00 15.88 4.40
2.750 88.90 71.35 76.20 3.00 15.88 4.40
2.875 95.25 74.53 79.38 3.00 15.88 4.40
3.000 98.43 77.70 82.55 3.00 15.88 4.40

53
Materials

Materials
The limits of pressure, temperature and Elastomer selection primarily sets Pac-Seals are available with various
speed depend on the materials specified temperature and chemical resistance. face combinations, from carbon, solid
for the rotary seals and seats, as well Differing face material combinations ceramic and stainless steel materials, as
as the nature of the media to be sealed. affect seal capability, performance standard. We offer choices of reaction
The maximum capabilities of each seal and life. Their pV (pressure x velocity) bonded & sintered silicon carbide and
type are shown on the individual data value largely determines the suitability tungsten carbide faces for hard face
sheets. Changes in single spring seal of material combinations of seal faces applications and also for use against
operating capabilities are particularly a and specifically the amount of heat carbon for ultimate pV capability.
factor of each seal design but are mainly generated at the faces. The ability of the
influenced by selection of elastomer type face material to resist wear increases the
and seal face materials. life of the seal particularly in abrasive
applications.

Spring &
Rotary (R) & Stationary Seat (S) Face Materials Elastomers & Gaskets Metal Body
Components
Material Code B A V Q2 Q1
SSiC - Self Sintered U2 G R P E V T G

Ethylene Propylene
Tungsten Carbide
Antimony Carbon

Fluoroelastomer

304 SS / 316 SS
Stainless Steel
(Nickel binder)
SiC - Reaction
Solid Alumina
Resin Carbon

Ni-Resist
Ceramic

Bonded

(Viton)
Nitrile

PTFE
Type
P35 R RS R RS R R R R
P38, P38D, P32 R RS R RS R R R R
O-Ring
Mounted P39, P42, P42D, P426 R RS R R R R R
P43, P43D R R RS R R R R
P260, P270, P280, P290 R RS R R R R R
P140, P142 R RS R R R R R
Elastomer P190, P192, P193 R RS R R R R R
Bellows P150, P151 R RS R R R R R
P250 R RS R RS R R R R
P100, P110, P200, P220 R RS R RS R R R R
Elastomer P240 R RS R RS R R R R
Diaphragm
P300, P320, P340, P350 R RS R RS R R R R
P167, P167B R RS R R R R R
Wave & P168, P168W, P168Y R R R R R
Multi Spring
P40 R RS R R R R R
P118 R RS R R R R R
Special P160, P161 R RS R R R R
P170, P171 R RS R R R R
8N S S SS S S S S
8B S SS S SS S S S S
2N, 2D S SS S SS S S S S
3N, 3D S SS S SS S S S S
9N S SS S SS S S S S
8S, 8L S S SS S S S S
4S, 4L S S SS S S S S
Stationary
Seats 1H, 3H S S SS S S S S S S
B1, B3 S S SS SS S S S
B2, B5 S S SS SS S S S
B4 S S SS SS S S S
B9 S S SS S S S S
5V S S SS S S
3P SS S S S S S S
5A S S SS S S S

R = Rotary Standard
RS = Rotary Special
S= Stationary Standard
SS = Stationary Special
= Standard

54
 flowserve.com

Materials & Nomenclature

Temperature Limits
Elastomers Application
Minimum Maximum
Ethylene Propylene (EPDM) E -40°C / -40°F 140°C / 284°F For general duties, especially hot water
Neoprene N -50°C / -58°F 100°C / 212°F For refrigeration applications
Nitrile Butadiene (Buna N) P -30°C / -22°F 120°C / 248°F For general duties
For very high chemical and
Perfluoroelastomer K -7°C / 19°F 246°C / 475°F temperature capability
Fluoroelastomer / PTFE coated M -18°C / 0°F 204°C / 400°F Near universal chemical resistance
Fluoroelastomer (e.g. Viton) V -30°C / -22°F 230°C / 446°F For general chemical applications
FEP/PFA T -60°C / -76°F 205°C - 260°C / 401°F - 500°F Near universal chemical resistance

Nomenclature
The seal nomenclature is a 15 to 19 digit The next four characters define the seal size
code, consisting of seal type, seat type, seal either in metric or imperial format. Metric
size and material combination. size seals are identified with the letter M,
followed by three numbers. A seal size of
The first character is a P for Pac-Seal 40mm would read M040. Imperial (inch) size
Products, followed immediately by two to seals are identified by four numbers. A seal
four characters defining the rotating seal size of 1.750” would read 1750.
type and two to three characters defining the
stationary seat type. The last five to seven characters define
complete seal materials for rotary face,
For O-Ring mounted seals, specify R for stationary seat, elastomers, spring and
right hand or L for optional left hand drive seal metal body parts as listed on page 54.
spring. Spring rotation is not specified for
Elastomer Bellows and Elastomer Diaphragm
seals as these are suitable for bi-directional
rotation.

Example 1 Example 2
Seal type P38D with 8S DIN short Seal type P192 with B9 boot mounted
stationary seat for 40mm shaft with stationary seat for 65mm shaft with SSiC/
Carbon/Ceramic/EPDM/SS SiC/Nitrile/SS

55
Installation & Seat Selection

Pac-Seal Installation Guidelines • Ensure that seal chamber face is square to the F. Check both seal surfaces to assure they are
shaft centreline within 0.025 mm per 25mm free of any foreign matter. Slide rotating seal head
Note: protect precision lapped shaft diameter (0.001” per 1” shaft diameter) to by hand pressure along the shaft to a completely
a maximum of 0.125mm (0.005”) TIR. parallel contact with the stationary seat. Avoid
faces of new seal seat and seal extreme installation pressure or hammering the
• Ensure that the shaft is concentric to the seal
ring from damage, dirt and finger chamber bore within 0.025 per 25mm shaft seal. Make sure spring correctly engages the
marks diameter (0.001” per 1” shaft diameter) to a shoulder of seal head and impeller shoulder or
maximum of 0.125mm (0.005”) TIR shaft spring retainer.
A. Disassemble pump housing to expose seal:
note how old seal is assembled to be sure D. For O-Ring and Diaphragm Seals G. Re-assemble impeller and/or pump housing.
replacement seal is installed in an identical Lubricate the shaft, rubber inner diameter of the
manner. rotating seal head and rubber outer diameter of the H. DO NOT RUN PUMP DRY. Always prime the
stationary seal seat with a light multi-purpose oil. pump before starting. In case of self-priming
B. Carefully remove old seal head and seat, taking Do not lubricate seal faces. Note: never use grease models the pump casing must be filled.
care not to scratch shaft or seal counter-bore. or heavy oil as installation lubricant, Do not use
petroleum based lubricants with EPDM. These instructions are intended for use by trained,
C. Clean shaft and counter-bore surfaces using experienced technicians who are familiar with the
fine emery cloth or equivalent. Remove rust, For Elastomer Bellows Seals installation and service of mechanical seals.
burrs and wipe clean. Avoid making flat spots or As above, but use water instead of oil. Press Seat Selection
otherwise changing original dimensions of the against the last spring convolution and avoid
shaft or bore. pressing on the face. Correct seat selection lays the foundation for
• Shaft runout should not exceed 0.05mm maximising seal performance. Preferred seat
(0.002”) TIR (Total Indicator Reading) at any E. Press seal firmly into counter-bore to be sure it types are shown with each seal. However, any seat
point along the shaft, for roller or ball type is bottomed square and at right angles to the shaft. design can be used with any seal, thereby giving
bearings. This can be hand pressed into place taking care to a maximum range of possible combinations. Seat
protect the sealing face from a direct blow with any housings for all Pac-Seal seats are recommended
• Shaft end play should not exceed 0.10mm
metal object. Use a piece of plastic between the to have a machined lead in of 1.5 to 2.0mm at 20
(0.004”) TIR on ball type thrust bearings.
face and any driving force. to 30 degrees angle.
• Ensure seal chamber face is sufficiently
smooth to make a good gasket joint.

Seat Type 8N 8B 2N 2D 3N 3D 9N 9A 8S 8L 4S 4L 6N 6W 6Y 9U 1H 3H B1 B2 B3 B4 B5 B6 B7 B8 B9 B65 B75

O-Ring mounted seat with 3 flats
DIN Short O-Ring mounted seat

DIN Short O-Ring mounted seat

DIN Short O-Ring mounted seat

DIN Short O-Ring mounted seat

DIN Long O-Ring mounted seat

DIN Long O-Ring mounted seat

Double O-Ring mounted seat

Center O-Ring mounted seat
Center O-Ring mounted seat
O-Ring mounted seat with 3

DIN Boot mounted seat

DIN Boot mounted seat

O-Ring mounted seat
O-Ring mounted seat
O-Ring mounted seat

O-Ring mounted seat

O-Ring mounted seat

O-Ring mounted seat

O-Ring mounted seat

- Standard
Boot mounted seat
Boot mounted seat
Boot mounted seat

Boot mounted seat

Boot mounted seat
Boot mounted seat
Boot mounted seat

Boot mounted seat

Boot mounted seat
- Optional
slots

Seal Type
P35, P38
P38D
P39
P42
P42D
O-Ring P426
Mounted P43
P43D
P32
P260
P270, P280
P290
P140, P142
P190
Elastomer P192, P193
Bellows P150
P151
P250
P100, P200
P110, P220
Elastomer P110U
Diaphragm P240
P300, P320
P340, P350
P167
P167B
Wave & P168
Multi Spring P168W
P168Y
P40
P118
P160
Special P161
P170
P171
56
 flowserve.com

OEM Specific Designs

Pac-Seal
Broad Range of OEM Specific Seal Designs

Consult your Flowserve representative for further details

57
 USA and Canada
Kalamazoo, Michigan USA
Telephone: +1 269 381 2650
Telefax: +1 269 382 8726

Europe, Middle East, Africa

Etten-Leur, The Netherlands
Telephone: +31 165 581400
Telefax: +31 165 554590

Asia Pacific
Singapore
Telephone: +65 6544 6800
Telefax: +65 6214 0541

Latin America
Mexico City
Telephone: +52 55 5567 7170
Telefax: +52 55 5567 4224

FSD132eng EMA REV 08-17

To find your local Flowserve representative

and find out more about Flowserve Corporation,
ISO 9001
visit www.flowserve.com
Certified
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly
selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the
purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications
under a wide variety of industrial service conditions. Although Flowserve can provide general guidelines, it cannot provide
specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility
for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user
should read and understand the Installation Instructions included with the product, and train its employees and contractors
in the safe use of Flowserve products in connection with the specific application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for
informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon.
Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with
respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications,
dimensions and information contained herein are subject to change without notice. Should any question arise concerning
these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.

© Flowserve Corporation (2017)