SMARTG-02 DIRECT

THREE PHASE METER

EM341-5D
Residential, Commercial, and Industrial
Applications (Low Voltage)

INTRODUCTION
The SmartG-02 electricity meter series are modern, electronic, fully programmable
devices, designed for application in AMI systems for monitoring and control of
electricity consumption.
The SmartG-02 electricity meter series meet remote data transmission
requirements and enable readouts of various measurands. The meters are
compliant with IEC and DLMS/COSEM standards and have been designed to
serve billing purposes.
EM341-5D, is a four wire, Prepaid/Postpaid compact electronic meter (direct
connection meter), with accuracy class 0.5, capable of measuring Active & Reactive
Energy and is type approved according to IEC & EN standards. This makes it
perfectly suitable for Residential, Commercial, and Industrial Applications (Low
Voltage).
The direct connection meter is used to measure energy consumption in 220
VAC, 50 Hz, and 5-100 Ampere, three-phase four wire power net. It contains an
independent measuring element allowing consumed energy to be measured.
There is a LED mounted on the front panel of the meter, pulsing at a rate of 1000
pulses per KWh or KVAr for energy registration.
The modular nature of the meter means that its communications interface
supports a broad range of field-upgradable communications options including
GPRS, PLC, and RF among others.

STANDARDS
• IEC 62052-11 • IEC 62056-42
• IEC 62053-23:2003 • IEC 62056-46
• EN 50470 • IEC 62056-53
• IEC 695-2-1 • IEC 62056-61
• IEC62055 (for contactor) • IEC 60068

www.elsewedyemg.com
[email protected]
 METER SPECIFICATIONS METER FEATURES
Electrical Characteristics Feature Description
Nominal Voltage 3X220/380 V Display • Fully electronic (LCD) with backlight

Voltage Variation (Min) -40% Vn • The meter is capable of storing two profiles. One
for energy and one for other parameters
Voltage Variation (Max) 30% Vn
Load Profile • Each profile has an integration period of 1 to 60
Nominal Current (Ibase) 5A minutes

Maximum Current (Imax) 100 A • The profiling period extends for at least 45 days

Nominal Frequency 50 Hz • The EM341-5-SmartG-02 records a considerable

amount of data for extended periods of time
Frequency Variations ±5%
Events • In addition, the EM341-5-SmartG-02 stores up to
0.5 Active 400 events
Accuracy Class
2 Reactive • Events are logged with a date/time stamp
Starting Current 0.4 % Ib
• The EM341-5-SmartG-02 has the ability to detect
Wiring 3 PH, 4 wires Network the following types of tamper attempts:

Number of elements 4 3  Meter Cover Open

3  Meter Cover Open
Power Consumption ≤ 2W 3  Terminal Cover Open
3  Module Cover Open
KWh Tamper Proofing 3  Reverse Connection
Measurements
MD(A)(KW) 3  Earth or Current Bypass Connection
3  Overload
Back-up Battery Type Lithium Battery 3  Over Voltage
3  Under Voltage
Back-up Battery Lifetime 10 Years 3  Phase Sequence
3  Missing Potential
Memory
Type Flash memory • The meter supports two alarm methods
3  LED Indicator
Retention Period More than 20 Years
3  Audible Alarm
Alarms
3  Messages on LCD
Environmental Conditions
• The meter can be configured to give any
IP Rating IP54 combination of alarms as required

Temperature Range -5°C to +70°C

• The relay control modes include:
Storage Temperature -25°C to +80°C 3  Remote Disconnect
3  Local Disconnect
Humidity Range <90%
• The relay is configurable to be triggered in the
Altitude 0-3600M event of:

Service Life 20 Years 3  Meter cover open

3  Meter Terminal Cover Open
Relay Operation
Communication 3  Module Cover Open
3  Energy Reverses
Standard Optical Port (IEC 3  Earth or Current Bypass Connection
62056-21) 3  Meter Current Overload
Optical Interface
Complies with DLMS/COSEM 3  Meter Over Voltage and Under Voltage
HDLC mode-E protocol 3  At Low Battery
RS-485 3  Phase Sequence
Serial Communication Port Complies with DLMS/COSEM 3  Missing Potential
direct HDLC protocol 3  Low Credit

Supported through the use

• With each power-up or firmware update, the
AMI/AMM Module of a GSM/GPRS Modem, PLC
meter shall diagnose:
Modem or RF Modem
Auto-diagnostics 3  Meter and memory integrity
Optical Port: 9600 bit/s
Data Transmission Rate RS-485: 9600 bit/s GPRS: 3  Display, alarms & battery status
56–114 Kbit/s 3  External communication module status

D
MECHANICAL SPECIFICATIONS
4 Dimensions: (L x W x D) =
W
277.3 mm x 177.4 mm x 88.5 mm L
4 Weight: Approximately 1.8Kg
4 Meter Housing: Flame Retardant Polycarbonate