Spooky2

Scalar
INSTRUCTION

June 2020
Spooky2 Team
Our Mission:

We will eliminate all illnesses and needless

suffering.

Our Vision:

We aim to empower people to take control

of their own health and live long, healthy,
fulfilling lives with happiness and joy.

Our Value:

We value love, compassion and honesty over

profit.
Spooky2 Scalar

Brief Overview 1

Parcel Contents 2

Detailed Overview 3

Setting up Spooky2 Scalar 4

Tuning 5

How to Apply Scalar Energy 8

Important Notes 11

Specifications 11

Spooky2 Scalar Digitizer

Brief Overview 12

Hardware 12

Software 15

Legal Notice & Disclaimer 21

 Spooky2 Scalar
Brief Overview

The key to healing is information - Scalar information. Our cells

communicate using Scalar fields. When this communication is
blocked, our health suffers. Spooky2 Scalar can restore our
body’s natural healing mechanisms.

Spooky2 Scalar is the first Scalar treatment device to provide

three different methods of sending healing Scalar waves. You
can choose which of these best suits your needs. You can read
more in the “How to Apply Scalar Energy” section.

Spooky2 Scalar is comprised of two black cases. One is called a

Transmitter, and the other, a Receiver. The Transmitter is turned
on and tuned. Anyone between the lids of the two cases receives
life-giving Scalar waves. Scalar treatments can be that simple.

1
Parcel Contents

Transmitter Box x 1

Receiver Box x 1

Link Cable x 1

Power Cable x 1

BNC Cable x 1

2
Detailed Overview

Transmitter Panel:

Receiver Panel：

3
Setting Up Spooky2 Scalar

Starting Scalar treatments is a breeze. There are 4 simple

steps:

1. Place the Transmitter and Receiver either side of a chair or

bed.
2. Connect the 12V Power Adapter to the Transmitter Power
Port.
3. Plug the Link Cable into the Transmitter and Receiver Link
Connectors.
4. Turn on and tune the Transmitter.

4
Tuning

Just like a radio, Spooky2 Scalar requires tuning. It is very

simple to do.

Turn the Tuning Adjustment knob anticlockwise until the Tuning

Light beside the transmitter coil is at its first maximum brightness.

In order not to interfere with your sleep at night, the Frequency

Display will automatically go off in 5 minutes if you don’t touch
the knob.

Important Note
There are two peaks during tuning. The first peak in the indication
light indicates that the “ideal” scalar frequency has been found.
The frequency range when the light illuminates is quite broad.

If you continue to turn the tuning knob anticlockwise, the indica-

tion light will extinguish, and then will come back on. This second,
lower frequency is the EMF operating frequency. It is the confir-
mation that the scalar frequency was found in the previous step.

5
 Receiver Light

1. After tuning, turn the Receiver Light on. It will illuminate when
a scalar field is present.
2. The Receiver Light only needs to be dimly lit. It does not need
to be at its brightest intensity.
3. Turn the Receiver Light off during scalar treatments. It takes
energy from the scalar field.
4. Use the Transmitter Tuning Light for tuning. The Receiver Light
can be used to confirm that a scalar field has been established.

When performing a scalar biofeedback scan or running Rife Scalar,

it is normal that the Receiver Light may be on, dim or even be
completely off. Some power is lost in the Scalar Digitizer and
GeneratorX, causing the link cable to become more sensitive to
the effects of earthing.

6
If the Receiver Light is off, you can do a test to make confirm that
the scalar field is actually present.

Go to the system tab and select “Display GX Current + Angle”.

Then go to the Control tab and check the scan graph. The graph
will be moving. Placing your hand in the scalar field should influ-
ence this graph, proving that a scalar field is present.

7
How to Apply Scalar Energy

Spooky2 Scalar can apply Scalar energy in three different

ways: Pure Scalar, Molecular Scalar, and Rife Scalar.

Pure Scalar
This is the easiest way of applying healing Scalar energy.
Because nothing special needs to be done. Tune Spooky2
Scalar, then sit or lie between the Transmitter and Receiver. Pure
Scalar energy then flows between the Transmitter and Receiver.

Molecular Scalar
The Scalar signal can be enhanced by placing a substance on
the receiver coil. The molecules within the sample will change
the signal between the lids. You get the curative effect of the
chemical. The substance can be essential oils or drugs. For
instance, you can place peppermint oil on the receiver coil, and
you will receive the benefits that peppermint oil provides.

8
Scientific studies have proven that information alone can cause
destruction to pathogens. Poisoned cancer cells on the receiver
coil will induce death of cancer cells inside your body. The infor-
mation of the dying cells is being passed to your internal cancer
cells, and they also die.

Rife Scalar

The third way to improve the Scalar waves is Rife Modulation. It

combines the discoveries of Royal Rife with Nicola Tesla. Royal
Rife found that pathogens respond to a particular frequency.
Spooky2 Scalar can apply this frequency using healing Scalar
waves. Only Spooky2 Scalar can modulate the original frequen-
cies of Royal Rife. It turns Spooky2 Scalar into the world’s most
advanced Rife machine.

Connect a Spooky2 generator to the Generator port on the

Transmitter box. Turn on the generator and tune your Spooky2
Scalar. Select the Spooky2 Scalar General (SS) - JW preset
(square wave, 5v and 100% offset.) Load the programs you wish
to run, and start the generator. Sit between the Transmitter and
Receiver while programs are running. Spooky2 Scalar accepts
any frequency from the massive Spooky2 database.

If you are new to Spooky2 Rife Machine, you can read more
information on spooky2.com and spooky2-mall.com.

9
You can put a glass of water on the transmitter coil during Mole-
cular or Rife Scalar treatments. This is the process called freq-
uency imprinting. After you put the glass on the transmitter coil,
retune your Spooky2 Scalar before your Scalar treatment. When
you finish the Scalar treatment, you can drink this water during
the day to enhance the treatment effects.

The two modulation methods can be used simultaneously to fur-

ther improve effectiveness of treatments. For example, to treat
Cancer, you can place Frankincense, Peppermint, Lavender,
Evening Primrose and Citrus essential oils on the receiver coil,
and run cancer-killing programs on the connected Spooky2
generator.

For example, people with cancer may wish to place a chemoth-

erapy drug on the receiver coil to induce cancer death in their
body. Adding a cancer toxin to a sample of their urine or blood
and placing that on the receiver coil will improve results further,
as the information of the cancer cells dying will be transferred to
the cancer cells in the body. They too will die.

10
Important Notes
1. Tune before each treatment. The tuning point may vary each
day according to the temperature and humidity, as well as the
layout of the machine.
2. The Transmitter and Receiver should have their lids facing
each other.
3. Keep the link cable between the Transmitter and Receiver
away from metal. Please do not roll the cable if the cable is long.
4. People who are pregnant or have a pacemaker should not use
Spooky2 Scalar.
5. Overnight treatments are perfectly safe. You do not get “Fre-
quency Fatigue” from overexposure to Scalar fields. Your body
takes what it needs, and disregards the rest.
6. It’s best not to share the Scalar field with anyone who has seri-
ous illness.
7. Free Gift: BNC Cable
We provide a BNC Cable in your parcel. You can use this BNC
cable to connect with a Spooky2 Generator to experience Rife
Scalar Treatments. It is not needed for Pure Scalar or Molecular
Scalar treatment.

Specifications
Transmitter Size: 170mm (H) x 360 (W) x 290 (D)
Receiver Size: 170mm (H) x 360 (W) x 290 (D)
Weight: 11 kg
Power Adapter: 12 VDC 2A
Input Current Maximum: 0.6A
Frequency Range: 1.00 MHz - 8.00 MHz
Frequency Step Size: 50 kHz
Scalar Flow: 30mA
Free Gift: BNC Cable

11
 Spooky2 Scalar Digitizer
Brief Overview
Biofeedback is a way of finding out what frequencies are best
suited to your body. Spooky2 Scalar is the only Scalar device
capable of performing a biofeedback scan. Spooky2 Scalar Digi-
tizer measures tiny changes in the scalar field during a scalar
frequency scan.
Scalar biofeedback requires the use of two generators. GX is two
generators in one. G2 modulates the Scalar field, and G1 mea-
sures the response. Follow the instructions below to perform a
Scalar biofeedback scan.

Hardware
1. Connect Scalar Digitizer to the link cable port on the Scalar
Transmitter.

12
2. Connect the link cable and power cable to the Spooky2 Scalar
Transmitter.

3. Connect G1 Out 1 to the Spooky2 Scalar Digitizer BNC port.

13
4. Connect G2 Out 1 to the Spooky2 Scalar Transmitter BNC
port.

5. Connect GX to the computer USB port and short press the

Power button to turn on GX.

6. Turn on and tune your Spooky2 Scalar.

14
Tip:
GX should not be in the Scalar field, because the case and elec-
tronics in GX are metal, and will distort the field. Please keep GX
1m away from Spooky2 Scalar Transmitter, and 1m from the
Scalar field.

Software

1. Launch the Spook2 software. Please take a note for the corre-
sponding port numbers for G1 and G2, which can be seen on the
GX display. In this example, G1 is Port 19 and G2 is Port 18.

2. Select the Spooky2 Scalar Digitizer Slave (GX) - JW preset,

then go to the Settings tab. In the Output Shadowing frame, set
'Output = [x]’, x = the port number of G1. Here, x=19.

15
3. Go to the Control tab, tick Overwrite Generator and choose
G2 (Port 18) to load the settings.

16
4. Then, go back to the Presets tab. Select the BFB Master
preset, go to the Control tab, tick Overwrite Generator, and
choose G1 (Port 19) to load the preset.

5. Lie between the two scalar units, and ask an assistant to click
the Scan button to start the biofeedback scan.

17
Note: If you do not have anyone to help, set the Start Delay to
2000. This will give you time to start the biofeedback scan and
position yourself correctly between the units.

G2 will automatically start, causing Spooky2 Scalar to transmit

the generator frequencies. G1 will start, but no frequencies will
be produced. Instead, the amount of Scalar energy being absor-
bed for each frequency by the body will be recorded.

When your scan completes, you will see the results presented in
a new window. Save the frequency results by clicking the Save
button.

18
This will take you to the Create Program window. Name your
scan results set appropriately, then select Save. We suggest in-
cluding the person’s name and date. You can edit the Notes if
you wish for future reference.

Spooky2 will automatically refresh the database after adding the

new program. Your new program can now be searched in the
Programs tab.

19
Use Spooky Scalar General (SS) - JW preset to run your scan
results.

Tips:
1. It is best to lie perfectly still, and only have one person in the
Scalar field. This field extends outward, so ensure no living
organism is nearby.
2. It is important to make a note which port numbers correspond
to G1 and G2 before running a biofeedback.
3. Spooky2 Scalar BFB Master preset performs the recording.
Spooky2 Scalar BFB Slave preset supplies the frequencies for
Spooky2 Scalar modulation.
4. We suggest using G1 with Spooky2 Scalar BFB Master pre-
set, and G2 with the corresponding slave preset.
5. You can do short scans once a day and longer scans once a
week.
6. It is best to remove Spooky2 Scalar Digitizer and retune
Spooky2 Scalar before running the biofeedback results. Spooky2
Scalar Digitizer slightly reduces the scalar field strength.

20
Legal Notice & Disclaimer

Spooky2 Scalar is intended for using as an experimental electronic

device only. It is not intended for the diagnosis, prevention,
cure, treatment, or mitigation of any disease or illness in human
beings.

People and/or entities involved in the development, manufacture

and/or marketing of Spooky/Spooky2 equipment (hereafter re-
ferred to as “we” or “us”) make no medical claims whatsoever for
the Spooky2 Scalar and/or Spooky2 frequency generation system.
If you have a problem with your health, please consult a licensed
healthcare professional.

Please note that we are not responsible whatsoever for the use,
abuse, or misuse, intentionally or unintentionally, of the Spooky2
Scalar and/or Spooky2 frequency generation system or any of its
component parts due to any circumstances beyond our reason-
able control. In any case, we shall have no other liability.

By using the Spooky2 Scalar and/or Spooky2 frequency genera-

tion system, you, the user, understand and accept that you have
no expectation of curing any ailment.

You also understand that possible negative physical and/or mental

effects, unknown to us, might result from the use of the Spooky2
Scalar and/or Spooky2 frequency generation system. Moreover,
you intend to undertake only responsible experimentation, and you
voluntarily accept all responsibility for the use and application of
Spooky2 Scalar.

Furthermore, you agree that you will not hold us responsible for
any consequences, whether harmful or otherwise, that may occur
as a result of using the Spooky2 Scalar and /or Spooky2 frequency
generation system.

21
Spooky2

www.spooky2scalar.com