Scribd
Upload
786 views

Concentric Swage Nipple

This document provides specifications for concentric swage nipples in various sizes, including: - Nominal pipe sizes from 1/4" to 3-1/2" - Outside diameters and wall thicknesses for large and small ends in different schedules - Dimensions are given for Sch 40, Sch 80, Sch 160, and extra strong (XS) wall thicknesses - Information is presented in a table format for easy reference to technical details for each swage nipple size

Uploaded by

Luis Fernando Manjarrez Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
786 views

Concentric Swage Nipple

This document provides specifications for concentric swage nipples in various sizes, including: - Nominal pipe sizes from 1/4" to 3-1/2" - Outside diameters and wall thicknesses for large and small ends in different schedules - Dimensions are given for Sch 40, Sch 80, Sch 160, and extra strong (XS) wall thicknesses - Information is presented in a table format for easy reference to technical details for each swage nipple size

Uploaded by

Luis Fernando Manjarrez Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Concentric Swage Nipple

Outside Diameter Wall Thickness


T1 T2
Nom. Pipe Large Small End
Size End End To Sch40 Sch80 Sch16 Sch40 Sch80
XXS Sch160 XXS
D1 D2 End (STD) (XS) 0 (STD) (XS)
“A”
1/4”x1/8” 13.7 10.3 57 2.2 3.0 3.7 6.1 1.7 2.4 - -
3/8”x1/8” 17.1 10.3 64 2.3 3.2 4.0 6.4 1.7 2.4 - -
3/8”x1/4” 17.1 13.7 64 2.3 3.2 4.0 6.4 2.2 3.0 - -
1/2”x1/8” 21.3 10.3 70 2.8 3.7 4.8 7.5 1.7 2.4 - -
1/2”x1/4” 21.3 13.7 70 2.8 3.7 4.8 7.5 2.2 3.0 - -
1/2”x3/8” 21.3 17.1 70 2.8 3.7 4.8 7.5 2.3 3.2 - -
3/4”x1/8” 26.7 10.3 76 2.9 3.9 5.6 7.8 1.7 2.4 - -
3/4’x1/4” 26.7 13.7 76 2.9 3.9 5.6 7.8 2.2 3.0 - -
3/4”x3/8” 26.7 17.1 76 2.9 3.9 5.6 7.8 2.3 3.2 - -
3/4”x1/2” 26.7 21.3 76 2.9 3.9 5.6 7.8 2.8 3.7 4.8 7.5
1”x1/8” 33.4 10.3 89 3.4 4.5 6.4 9.1 1.7 2.4 - -
1”x1/4” 33.4 13.7 89 3.4 4.5 6.4 9.1 2.2 3.0 - -
1”x3/8” 33.4 17.1 89 3.4 4.5 6.4 9.1 2.3 3.2 - -
1”x1/2” 33.4 21.3 89 3.4 4.5 6.4 9.1 2.8 3.7 4.8 7.5
1”x3/4” 33.4 26.7 89 3.4 4.5 6.4 9.1 2.9 3.9 5.6 7.8
1-1/4”x1/8” 42.2 10.3 102 3.6 4.9 6.4 9.7 1.7 2.4 - -
1-1/4”x1/4” 42.2 13.7 102 3.6 4.9 6.4 9.7 2.2 3.0 - -
1-1/4”x3/8” 42.2 17.1 102 3.6 4.9 6.4 9.7 2.3 3.2 - -
1-1/4”x1/2” 42.2 21.3 102 3.6 4.9 6.4 9.7 2.8 3.7 4.8 7.5
1-1/4”x3/4” 42.2 26.7 102 3.6 4.9 6.4 9.7 2.9 3.9 5.6 7.8
1-1/4”x1” 42.2 33.4 102 3.6 4.9 6.4 9.7 3.4 4.5 6.4 9.1
1-1/2”x1/8” 48.3 10.3 114 3.7 5.1 7.1 10.2 1.7 2.4 - -
1-1/2”x1/4” 48.3 13.7 114 3.7 5.1 7.1 10.2 2.2 3.0 - -
1-1/2”x3/8” 48.3 17.1 114 3.7 5.1 7.1 10.2 2.3 3.2 - -
1-1/2”x1/2” 48.3 21.3 114 3.7 5.1 7.1 10.2 2.8 3.7 4.8 7.5
1-1/2”x3/4” 48.3 26.7 114 3.7 5.1 7.1 10.2 2.9 3.9 5.6 7.8
1-1/2”x1” 48.3 33.4 114 3.7 5.1 7.1 10.2 3.4 4.5 6.4 9.1
1-1/2”x1-1/4” 48.3 42.2 114 3.7 5.1 7.1 10.2 3.6 4.9 6.4 9.7
2”x1/8” 60.3 10.3 165 3.9 5.5 8.7 11.1 1.7 2.4 - -
2”x1/4” 60.3 13.7 165 3.9 5.5 8.7 11.1 2.2 3.0 - -
2”x3/8” 60.3 17.1 165 3.9 5.5 8.7 11.1 2.3 3.2 - -
2”x1/2” 60.3 21.3 165 3.9 5.5 8.7 11.1 2.8 3.7 4.8 7.5
2”x3/4” 60.3 26.7 165 3.9 5.5 8.7 11.1 2.9 3.9 5.6 7.8

Website: www.pipefittingweb.com Email: [email protected] Fax: 886-423112578


Concentric Swage Nipple

Outside Diameter Wall Thickness


T1 T2
Nom. Pipe Large Small End
Size End End To Sch40 Sch80 Sch40 Sch80
Sch160 XXS Sch160 XXS
D1 D2 End (STD) (XS) (STD) (XS)
“A”
2”x1” 60.3 33.4 165 3.9 5.5 8.7 11.1 3.4 4.5 6.4 9.1
2”x1-1/4” 60.3 42.2 165 3.9 5.5 8.7 11.1 3.6 4.9 6.4 9.7
2”x1-1/2” 60.3 48.3 165 3.9 5.5 8.7 11.1 3.7 5.1 7.1 10.2
2-1/2”x1/8” 73.0 10.3 178 5.2 7.0 9.5 14.0 1.7 2.4 - -
2-1/2”x1/4” 73.0 13.7 178 5.2 7.0 9.5 14.0 2.2 3.0 - -
2-1/2”x3/8” 73.0 17.1 178 5.2 7.0 9.5 14.0 2.3 3.2 - -
2-1/2”x1/2” 73.0 21.3 178 5.2 7.0 9.5 14.0 2.8 3.7 4.8 7.5
2-1/2”x3/4” 73.0 26.7 178 5.2 7.0 9.5 14.0 2.9 3.9 5.6 7.8
2-1/2”x1” 73.0 33.4 178 5.2 7.0 9.5 14.0 3.4 4.5 6.4 9.1
2-1/2”x1-1/4” 73.0 42.2 178 5.2 7.0 9.5 14.0 3.6 4.9 6.4 9.7
2-1/2”x1-1/2” 73.0 48.3 178 5.2 7.0 9.5 14.0 3.7 5.1 7.1 10.2
2-1/2”x2” 73.0 60.3 178 5.2 7.0 9.5 14.0 3.9 5.5 8.7 11.1
3”x1/8” 88.9 10.3 203 5.5 7.6 11.1 15.2 1.7 2.4 - -
3”x1/4” 88.9 13.7 203 5.5 7.6 11.1 15.2 2.2 3.0 - -
3”x3/8” 88.9 17.1 203 5.5 7.6 11.1 15.2 2.3 3.2 - -
3”x1/2” 88.9 21.3 203 5.5 7.6 11.1 15.2 2.8 3.7 4.8 7.5
3”x3/4” 88.9 26.7 203 5.5 7.6 11.1 15.2 2.9 3.9 5.6 7.8
3”x1” 88.9 33.4 203 5.5 7.6 11.1 15.2 3.4 4.5 6.4 9.1
3”x1-1/4” 88.9 42.2 203 5.5 7.6 11.1 15.2 3.6 4.9 6.4 9.7
3”x1-1/2” 88.9 48.3 203 5.5 7.6 11.1 15.2 3.7 5.1 7.1 10.2
3”x2” 88.9 60.3 203 5.5 7.6 11.1 15.2 3.9 5.5 8.7 11.1
3”x2-1/2” 88.9 73.0 203 5.5 7.6 11.1 15.2 5.2 7.0 9.5 14.0
3-1/2”x1/8” 101.6 10.3 203 5.7 8.1 - - 1.7 2.4 - -
3-1/2”x1/4” 101.6 13.7 203 5.7 8.1 - - 2.2 3.0 - -
3-1/2”x3/8” 101.6 17.1 203 5.7 8.1 - - 2.3 3.2 - -
3-1/2”x1/2” 101.6 21.3 203 5.7 8.1 - - 2.8 3.7 4.8 7.5
3-1/2”x3/4” 101.6 26.7 203 5.7 8.1 - - 2.9 3.9 5.6 7.8
3-1/2”x1” 101.6 33.4 203 5.7 8.1 - - 3.4 4.5 6.4 9.1
3-1/2”x1-1/4” 101.6 42.2 203 5.7 8.1 - - 3.6 4.9 6.4 9.7
3-1/2”x1-1/2” 101.6 48.3 203 5.7 8.1 - - 3.7 5.1 7.1 10.2
3-1/2”x2” 101.6 60.3 203 5.7 8.1 - - 3.9 5.5 8.7 11.1
3-1/2”x2-1/2” 101.6 73.0 203 5.7 8.1 - - 5.2 7.0 9.5 14.0
3-1/2”x3” 101.6 88.9 203 5.7 8.1 - - 5.5 7.6 11.1 15.2

Website: www.pipefittingweb.com Email: [email protected] Fax: 886-423112578


Concentric Swage Nipple

Outside Diameter Wall Thickness


T1 T2
Nom. Pipe Large Small End
Size End End To Sch40 Sch80 Sch40 Sch80
Sch160 XXS Sch160 XXS
D1 D2 End (STD) (XS) (STD) (XS)
“A”
4”x1/4” 114.3 13.7 229 6.0 8.6 13.5 17.1 2.2 3.0 - -
4”x3/8” 114.3 17.1 229 6.0 8.6 13.5 17.1 2.3 3.2 - -
4”x1/2” 114.3 21.3 229 6.0 8.6 13.5 17.1 2.8 3.7 4.8 7.5
4”x3/4” 114.3 26.7 229 6.0 8.6 13.5 17.1 2.9 3.9 5.6 7.8
4”x1” 114.3 33.4 229 6.0 8.6 13.5 17.1 3.4 4.5 6.4 9.1
4”x1-1/4” 114.3 42.2 229 6.0 8.6 13.5 17.1 3.6 4.9 6.4 9.7
4”x1-1/2” 114.3 48.3 229 6.0 8.6 13.5 17.1 3.7 5.1 7.1 10.2
4”x2” 114.3 60.3 229 6.0 8.6 13.5 17.1 3.9 5.5 8.7 11.1
4”x2-1/2” 114.3 73.0 229 6.0 8.6 13.5 17.1 5.2 7.0 9.5 14.0
4”x3” 114.3 88.9 229 6.0 8.6 13.5 17.1 5.5 7.6 11.1 15.2
4”x3-1/2” 114.3 101.6 229 6.0 8.6 13.5 17.1 5.7 8.1 - -
(1) Dimensions in accordance with MSS SP-95-2014.
(2) Wall Thickness (T1 & T2) in accordance with ASME B36.10M.
(3) Connection end types:
PBE：Plain Both Ends BBE：Bevel Both Ends TBE：Thread Both Ends
PSE：Plain Small End BSE：Bevel Small End TSE：Thread Small End
PLE：Plain Large End BLE：Bevel Large End TLE：Thread Large End

Website: www.pipefittingweb.com Email: [email protected] Fax: 886-423112578

You might also like