EN

Glued Laminated Timber

The engineered timber beam.
 © [Link]

2 HASSLACHER group | Glued Laminated Timber

01
At a glance

Areas of application
Single and multiple family houses
Multi-storey residential and office buildings
Public and administrative buildings
Agricultural facilities
Industrial and production halls
Recreational and sport-hall facilities

Fields of use
Roof structures
also as visible components
Main beams with large spans
also with special shapes
Columns
Floor structures
or as girder grid system

Advantages
Innovation at its best:
direct, pre-cambered and with special shapes
Large spans
High loadbearing capacity with a low density
High dimensional stability through bonding
Can be assembled with simple tools
High fire and chemical resistance
High thermal insulation properties
Natural, renewable and 100 % recyclable building material

Glued Laminated Timber | HASSLACHER group 3

 02
Overview

Product standard/certification
EN 14080

Surface qualities
Visual quality
Industrial quality

Cross sections
Heights: 80 to 1,280 mm in 40 mm steps
Special components up to 4,000 mm are possible
Widths: 80 mm to 280 mm in 20 mm steps
Any desired extension is possible through block bonding
Lengths: up to 27 m; or up to 42 m as special components

Strength classes
GL24h GL24c up to a beam width of 280 mm
GL28h GL28c up to a beam width of 280 mm
GL30h GL30c up to a beam width of 240 mm
GL32h GL32c up to a beam width of 200 mm
Other strength classes available on request

Wood species
Spruce/fir
Larch
Pine
Other wood species on request

Certification
The current certificates are available in the download area
of our website at [Link].

Sustainability
The HASSLACHER Group stands for a careful use of wood
as a resource. Our raw materials come from sustainable
and controlled forestry. Our locations are certified
according to the strict PEFC TM standards.

4 HASSLACHER group | Glued Laminated Timber

03
Technical data

Bonding Diffusion resistance

Melamine resin adhesive with bright glue line, According to EN ISO 10456
adhesive type I according to EN 301 approved m = 50 (dry) to 20 (wet)
for bonding loadbearing and non-loadbearing
timber components, both indoors and outdoors
Formaldehyde emissions
E1 according to EN 717-1 (<0.1 ppm)
Lamella thickness
Maximum lamella thicknesses: 45 mm
Maximum service class 3 lamella thicknesses: Fire behaviour
35 mm (also, 40 mm to 60,000 mm² of cross D-s2, d0
sectional area) D fl -s1 when used as floor covering
For curved/arched special components:
Lamella thickness from 6 to 45 mm
Rod bonding for three-dimensional shaped Structural fire resistance
components 0.70 mm/min in accordance to EN 1995-1-2

Moisture content Shrinkage and swelling behaviour

12 % ±2.5 % Perpendicular to the grain direction
au,90 = 0.24 % per 1 % change in moisture content

Density Parallel to the grain direction

For spruce, and depending on the strength au,0 = 0.01 % per 1 % change in moisture content
class, approximately 400 kg/m³ to 500 kg/m³
in average
Dimensional tolerances
In accordance to EN 14080
Thermal conductivity
l = 0.13 W/mK
Service classes (EN 1995-1-1)
Service class 1 heated interior
Service class 2 roofed outdoor area
Service class 3 Exposed to the elements
(on request)

Glued Laminated Timber | HASSLACHER group 5

 © HASSLACHER group

6 HASSLACHER group | Glued Laminated Timber

04
Quality description

Characteristics Visual Quality Industry Quality

General Optimised for a visible use, e.g. as Optimised for a non-visual use.
visible rafters and beams for carports Discolouration such as blue stain,
and upscale residential areas. All nail-proof brown and/or red stripes
knots are sound knots and knotholes are permitted. Fallen-out knots and
are patched. The occurrence of pitch pockets may casually occur. For
blue stains, red stripes and/or pitch loadbearing and non-loadbearing use
pockets is minimised. The cracks are in engineered timber structures with
minimised and hardly any heart centre lower aesthetic requirements.
is present due to core-free cutting. A
homogeneous appearance is aspired.
Black knots Permitted, provided that they do not Permitted
fall out
Falling knots Permitted up to approximately 20 mm, Permitted
sound knots are permitted
Wane Not permitted Not permitted
Rotten areas Not permitted Not permitted
Pith Permitted Permitted
Pitch pockets Permitted up to approximately Permitted
5 x 50 mm, larger pockets must
be patched
Insect infestations Not permitted Permitted up to a diameter of 2 mm
Red stripes Up to approximately 5 % of the surface Permitted
Blue stain Up to approximately 5 % of the surface Permitted
Planing quality Rough areas are not permitted. Rough areas and planer marks are
Planer marks up to a length of 10 mm permitted
and a depth of 1 mm are permitted
Cracks Permitted up to a depth of 1/6 of Permitted up to a depth of 1/6 of the
the component width (per side); component width (per side); as long
as long as the required static as the required static loadbearing
loadbearing capacity is not impared capacity is not impared
Scope of validity The specified surface qualities are valid at time of delivery.

Glued Laminated Timber | HASSLACHER group 7

 05
Straight beams
Standard packing units
Packaging units
Height t m³ t m³ t m³ t m³ t m³ t m³ t m³ t m³
in mm unit cm unit cm unit cm unit cm unit cm unit cm unit cm unit cm
2.5 5.5 3.1 6.9 1.9 4.1 2.2 4.8 1.2 2.8 1.4 3.1 1.6 3.5 1.9 4.1
1,280
4 128 x 32 4 128 x 40 2 128 x 24 2 128 x 28 1 128 x 16 1 128 x 18 1 128 x 20 1 128 x 24
2.4 5.4 3.0 6.7 1.8 4.0 2.1 4.7 2.4 5.4 1.4 3.0 1.5 3.3 1.8 4.0
1,240
4 124 x 32 4 124 x 40 2 124 x 24 2 124 x 28 2 124 x 32 1 124 x 18 1 124 x 20 1 124 x 24
2.3 5.2 2.9 6.5 1.7 3.9 2.0 4.5 2.3 5.2 1.3 2.9 1.5 3.2 1.7 3.9
1,200
4 120 x 32 4 120 x 40 2 120 x 24 2 120 x 28 2 120 x 32 1 120 x 18 1 120 x 20 1 120 x 24
2.3 5.0 2.8 6.3 1.7 3.8 2.0 4.4 2.3 5.0 1.3 2.8 1.4 3.1 1.7 3.8
1,160
4 116 x 32 4 116 x 40 2 116 x 24 2 116 x 28 2 116 x 32 1 116 x 18 1 116 x 20 1 116 x 24
2.2 4.8 2.7 6.0 1.6 3.6 1.9 4.2 2.2 4.8 2.4 5.4 1.4 3.0 1.6 3.6
1,120
4 112 x 32 4 112 x 40 2 112 x 24 2 112 x 28 2 112 x 32 2 112 x 36 1 112 x 20 1 112 x 24
2.1 4.7 2.6 5.8 1.6 3.5 1.8 4.1 2.1 4.7 2.4 5.2 1.3 2.9 1.6 3.5
1,080
4 108 x 32 4 108 x 40 2 108 x 24 2 108 x 28 2 108 x 32 2 108 x 36 1 108 x 20 1 108 x 24
2.0 4.5 2.5 5.6 1.5 3.4 1.8 3.9 2.0 4.5 2.3 5.1 1.3 2.8 1.5 3.4
1,040
4 104 x 32 4 104 x 40 2 104 x 24 2 104 x 28 2 104 x 32 2 104 x 36 1 104 x 20 1 104 x 24
1.9 4.3 2.4 5.4 1.5 3.2 1.7 3.8 1.9 4.3 2.2 4.9 2.4 5.4 2.9 6.5
1,000
4 100 x 32 4 100 x 40 2 100 x 24 2 100 x 28 2 100 x 32 2 100 x 36 2 100 x 40 2 100 x 48
1.9 4.1 2.3 5.2 1.4 3.1 1.6 3.6 1.9 4.1 2.1 4.7 2.3 5.2 2.8 6.2
960
4 96 x 32 4 96 x 40 2 96 x 24 2 96 x 28 2 96 x 32 2 96 x 36 2 96 x 40 2 96 x 48
1.8 4.0 2.2 5.0 1.3 3.0 1.6 3.5 1.8 4.0 2.0 4.5 2.2 5.0 2.7 6.0
920
4 92 x 32 4 92 x 40 2 92 x 24 2 92 x 28 2 92 x 32 2 92 x 36 2 92 x 40 2 92 x 48
1.7 3.8 2.1 4.8 1.3 2.9 1.5 3.3 1.7 3.8 1.9 4.3 2.1 4.8 2.6 5.7
880
4 88 x 32 4 88 x 40 2 88 x 24 2 88 x 28 2 88 x 32 2 88 x 36 2 88 x 40 2 88 x 48
1.6 3.6 2.0 4.5 1.2 2.7 1.4 3.2 1.6 3.6 1.8 4.1 2.0 4.5 2.4 5.4
840
4 84 x 32 4 84 x 40 2 84 x 24 2 84 x 28 2 84 x 32 2 84 x 36 2 84 x 40 2 84 x 48
1.6 3.5 1.9 4.3 1.2 2.6 1.4 3.0 1.6 3.5 1.7 3.9 1.9 4.3 2.3 5.2
800
4 80 x 32 4 80 x 40 2 80 x 24 2 80 x 28 2 80 x 32 2 80 x 36 2 80 x 40 2 80 x 48
1.5 3.3 1.8 4.1 1.1 2.5 1.3 2.9 1.5 3.3 1.7 3.7 1.8 4.1 2.2 4.9
760
4 76 x 32 4 76 x 40 2 76 x 24 2 76 x 28 2 76 x 32 2 76 x 36 2 76 x 40 2 76 x 48
1.4 3.1 1.7 3.9 1.0 2.3 1.2 2.7 1.4 3.1 1.6 3.5 1.7 3.9 2.1 4.7
720
4 72 x 32 4 72 x 40 2 72 x 24 2 72 x 28 2 72 x 32 2 72 x 36 2 72 x 40 2 72 x 48
1.3 2.9 1.7 3.7 1.0 2.2 1.2 2.6 1.3 2.9 1.5 3.3 1.7 3.7 2.0 4.4
680
4 68 x 32 4 68 x 40 2 68 x 24 2 68 x 28 2 68 x 32 2 68 x 36 2 68 x 40 2 68 x 48
1.2 2.8 1.6 3.5 0.9 2.1 1.1 2.4 1.2 2.8 1.4 3.1 1.6 3.5 1.9 4.1
640
4 64 x 32 4 64 x 40 2 64 x 24 2 64 x 28 2 64 x 32 2 64 x 36 2 64 x 40 2 64 x 48
2.3 5.2 2.9 6.5 1.7 3.9 2.0 4.5 2.3 5.2 2.6 5.8 2.9 6.5 3.5 7.8
600
8 120 x 32 8 120 x 40 4 120 x 24 4 120 x 28 4 120 x 32 4 120 x 36 4 120 x 40 4 120 x 48
2.2 4.8 2.7 6.0 1.6 3.6 1.9 4.2 2.2 4.8 2.4 5.4 2.7 6.0 3.3 7.3
560
8 112 x 32 8 112 x 40 4 112 x 24 4 112 x 28 4 112 x 32 4 112 x 36 4 112 x 40 4 112 x 48
2.0 4.5 2.5 5.6 1.5 3.4 1.8 3.9 2.0 4.5 2.3 5.1 2.5 5.6 3.0 6.7
520
8 104 x 32 8 104 x 40 4 104 x 24 4 104 x 28 4 104 x 32 4 104 x 36 4 104 x 40 4 104 x 48
1.9 4.1 2.3 5.2 1.4 3.1 1.6 3.6 1.9 4.1 2.1 4.7 2.3 5.2 2.8 6.2
480
8 96 x 32 8 96 x 40 4 96 x 24 4 96 x 28 4 96 x 32 4 96 x 36 4 96 x 40 4 96 x 48
1.7 3.8 2.1 4.8 1.3 2.9 1.5 3.3 1.7 3.8 1.9 4.3 2.1 4.8 2.6 5.7
440
8 88 x 32 8 88 x 40 4 88 x 24 4 88 x 28 4 88 x 32 4 88 x 36 4 88 x 40 4 88 x 48
2.3 5.2 2.9 6.5 1.7 3.9 2.0 4.5 2.3 5.2 2.6 5.8 2.9 6.5 3.5 7.8
400
12 120 x 32 12 120 x 40 6 120 x 24 6 120 x 28 6 120 x 32 6 120 x 36 6 120 x 40 6 120 x 48
2.1 4.7 2.6 5.8 1.6 3.5 1.8 4.1 2.1 4.7 2.4 5.2 2.6 5.8 3.1 7.0
360
12 108 x 32 12 108 x 40 6 108 x 24 6 108 x 28 6 108 x 32 6 108 x 36 6 108 x 40 6 108 x 48
1.9 4.1 2.3 5.2 1.4 3.1 1.6 3.6 1.9 4.1 2.1 4.7 2.3 5.2 2.8 6.2
320
12 96 x 32 12 96 x 40 6 96 x 24 6 96 x 28 6 96 x 32 6 96 x 36 6 96 x 40 6 96 x 48
2.2 4.8 2.7 6.0 1.6 3.6 1.9 4.2 2.2 4.8 2.4 5.4 2.7 6.0 1.6 7.3
280
16 112 x 32 16 112 x 40 8 112 x 24 8 112 x 28 8 112 x 32 8 112 x 36 8 112 x 40 8 112 x 48
2.3 5.2 2.9 6.5 1.7 3.9 2.0 4.5 2.3 5.2 2.6 5.8 2.9 6.5 3.5 7.8
240
20 120 x 32 20 120 x 40 10 120 x 24 10 120 x 28 10 120 x 32 10 120 x 36 10 120 x 40 10 120 x 48
2.3 5.2 2.9 6.5 1.7 3.9 2.0 4.5 2.3 5.2 2.6 5.8 2.9 6.5
200
24 120 x 32 24 120 x 40 12 120 x 24 12 120 x 28 12 120 x 32 12 120 x 36 12 120 x 40
2.2 4.8 2.7 6.0 1.6 3.6 1.9 4.2 2.2 4.8
160
28 112 x 32 28 112 x 40 14 112 x 24 14 112 x 28 14 112 x 32
2.3 5.2 2.9 6.5 1.7 3.9
120
40 120 x 32 40 120 x 40 20 120 x 24
Width
80 100 120 140 160 180 200 240
in mm
260 mm and 280 mm widths are available on request. Can be expanded by block bonding if desired. Heights up to 4.0 0 0 mm are possible

8 HASSLACHER group | Glued Laminated Timber

06
Special components
Product portfolio

Single tapered beams Curved beams Double-tapered

or pre-cambered or pitched cambered
parallel beams beams
Beam length: up to 40 m
Beam length: up to 40 m Beam length: up to 40 m
Width: 80 to 280 mm
Width: 80 to 280 mm Width: 80 to 280 mm
Block bonding: >280 mm Block bonding: >280 mm Block bonding: >280 mm
possible on request
possible on request possible on request
Heights: up to 4,000 mm
Heights: up to 4,000 mm Heights: up to 4,000 mm

Fish beams Trussed girders Free forms

Beam length: up to 40 m Span lengths: >40 m Lengths: up to 40 m

Width: 80 to 280 mm Width: 80 to 280 mm Widths: up to 280 mm

Block bonding: >280 mm Block bonding: >280 mm Block bonding: >280 mm

possible on request possible on request possible on request

Heights: up to 4,000 mm Heights: >4,000 mm are possible Heights: up to 4,000 mm

Glued Laminated Timber | HASSLACHER group 9

 07
Mechanical
properties

Glued Laminated Timber – Mechanical properties

characteristic strength and stiffness properties for homogeneous glued laminated timber
Strength class GL20h GL24h GL28h GL30h GL32h
Bending strength f m,g,k 20 24 28 30 32
Tensile strength f t,0,g,k 16 19.2 22.3 24 25.6
f t,90,g,k 0,5
Compressive strength f c,0,g,k 20 24 28 30 32
f c,90,g,k 2.5
Shear strength f v,g,k 3.5
Rolling shear strength f r,g,k 1.2
Modulus of elasticity E 0,g,mean 8,400 11,500 12,600 13,600 14,200
E 0,g,05 7,000 9,600 10,500 11,300 11,800
E 90,g,mean 300
E90,g,05 250
Shear modulus G g,mean 650
Gg,05 540
Rolling shear modulus G r,g,mean 65
Gr,g,05 54
Density r g,k 340 385 425 430 440
r g,mean 370 420 460 480 480

Characteristic strength and stiffness properties for combined glued laminated timber
Strength class GL24c GL28c GL30c GL32c
Bending strength f m,g,k 24 28 30 32
Tensile strength f t,0,g,k 17 19.5 19.5 19.5
f t,90,g,k 0.5
Compressive strength f c,0,g,k 21.5 24 24.5 24.5
f c,90,g,k 2.5
Shear strength f v,g,k 3.5
Rolling shear strength f r,g,k 1.2
Modulus of Elasticity E 0,g,mean 11,000 12,500 13,000 13,500
E 0,g,05 9,100 10,400 10,800 11,200
E 90,g,mean 300
E90,g,05 250
Shear modulus G g,mean 650
Gg,05 540
Rolling shear modulus G r,g,mean 65
Gr,g,05 54
Density r g,k 365 390 390 400
r g,mean 400 420 430 440

10 HASSLACHER group | Glued Laminated Timber

08
Tables for
preliminary design

Glued Laminated Timber – Strength class GL24h L

Height Width Persistent loads q incl. imposed load p in kN/m

in mm in mm 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00 10.0 11.0 12.0 15.0 20.0 25.0 30.0
360 240 9.64 9.15 8.74 8.40 8.11 7.85 7.42 7.07 6.78 6.53 6.32 6.13 5.96 5.44 4.73 4.24 3.87
220 9.40 8.92 8.52 8.18 7.89 7.64 7.22 6.88 6.60 6.35 6.14 5.96 5.79 5.21 4.53 4.06 3.71
200 9.15 8.67 8.28 7.95 7.67 7.42 7.01 6.68 6.40 6.16 5.96 5.78 5.55 4.97 4.32 3.87 3.54
180 8.87 8.40 8.02 7.70 7.42 7.18 6.78 6.46 6.19 5.96 5.76 5.50 5.27 4.73 4.10 3.68 3.36
160 8.57 8.11 7.73 7.42 7.15 6.92 6.53 6.22 5.96 5.72 5.44 5.19 4.97 4.46 3.87 3.47 3.04
140 8.23 7.78 7.42 7.12 6.86 6.63 6.26 5.96 5.68 5.36 5.09 4.86 4.66 4.18 3.62 3.19 2.67
320 200 8.17 7.74 7.38 7.09 6.83 6.61 6.24 5.94 5.70 5.48 5.30 5.14 4.94 4.43 3.84 3.44 3.15
180 7.92 7.49 7.15 6.86 6.61 6.40 6.04 5.75 5.51 5.30 5.12 4.89 4.69 4.21 3.65 3.27 2.99
160 7.64 7.23 6.89 6.61 6.37 6.16 5.82 5.53 5.30 5.10 4.84 4.62 4.43 3.97 3.44 3.08 2.71
140 7.34 6.94 6.61 6.34 6.11 5.91 5.57 5.30 5.06 4.77 4.53 4.33 4.15 3.72 3.22 2.84 2.37
120 7.00 6.61 6.30 6.04 5.82 5.62 5.30 5.01 4.69 4.43 4.21 4.01 3.84 3.44 2.99 2.44 2.03
280 200 7.18 6.80 6.48 6.22 6.00 5.80 5.47 5.21 4.99 4.81 4.65 4.50 4.33 3.88 3.37 3.02 2.76
180 6.96 6.58 6.28 6.02 5.80 5.61 5.29 5.04 4.83 4.65 4.49 4.29 4.11 3.68 3.20 2.86 2.62
160 6.71 6.35 6.05 5.80 5.59 5.40 5.10 4.85 4.65 4.47 4.24 4.05 3.88 3.48 3.02 2.70 2.37
140 6.44 6.09 5.80 5.56 5.36 5.18 4.88 4.65 4.43 4.18 3.97 3.79 3.63 3.25 2.82 2.49 2.08
120 6.14 5.80 5.52 5.29 5.10 4.93 4.65 4.39 4.11 3.88 3.68 3.52 3.37 3.02 2.62 2.14 1.78
100 5.80 5.47 5.21 4.99 4.81 4.65 4.33 4.01 3.76 3.55 3.37 3.21 3.08 2.76 2.22 1.78 1.49
240 200 6.19 5.85 5.58 5.35 5.15 4.98 4.70 4.47 4.29 4.13 3.99 3.86 3.72 3.33 2.89 2.59 2.36
180 5.99 5.66 5.40 5.17 4.98 4.82 4.55 4.33 4.14 3.99 3.85 3.68 3.53 3.16 2.74 2.46 2.24
160 5.78 5.46 5.20 4.98 4.80 4.64 4.38 4.16 3.99 3.83 3.64 3.48 3.33 2.98 2.59 2.32 2.03
140 5.54 5.23 4.98 4.78 4.60 4.45 4.19 3.99 3.81 3.59 3.41 3.25 3.12 2.79 2.42 2.14 1.78
120 5.28 4.98 4.74 4.55 4.38 4.23 3.99 3.77 3.53 3.33 3.16 3.02 2.89 2.59 2.24 1.83 1.53
100 4.98 4.70 4.47 4.29 4.13 3.99 3.72 3.44 3.23 3.04 2.89 2.76 2.64 2.36 1.91 1.53 1.27
200 160 4.83 4.56 4.35 4.16 4.01 3.88 3.65 3.47 3.33 3.20 3.04 2.90 2.78 2.49 2.16 1.93 1.70
140 4.63 4.37 4.16 3.99 3.84 3.71 3.50 3.33 3.18 3.00 2.85 2.72 2.60 2.33 2.02 1.78 1.49
120 4.41 4.16 3.96 3.80 3.65 3.53 3.33 3.14 2.94 2.78 2.64 2.52 2.41 2.16 1.87 1.53 1.27
100 4.16 3.93 3.74 3.58 3.44 3.33 3.10 2.87 2.69 2.54 2.41 2.30 2.20 1.97 1.59 1.27 1.06
160 120 3.54 3.34 3.18 3.04 2.93 2.83 2.66 2.52 2.36 2.23 2.11 2.02 1.93 1.73 1.50 1.22 1.02
100 3.34 3.15 2.99 2.87 2.76 2.66 2.49 2.30 2.16 2.03 1.93 1.84 1.76 1.58 1.27 1.02 0.85
80 3.11 2.93 2.78 2.66 2.56 2.44 2.23 2.06 1.93 1.82 1.73 1.65 1.58 1.36 1.02 0.82 0.68
120 100 2.51 2.37 2.25 2.15 2.07 2.00 1.87 1.73 1.62 1.53 1.45 1.38 1.32 1.18 0.96 0.77 0.64
80 2.34 2.20 2.09 2.00 1.92 1.83 1.67 1.55 1.45 1.37 1.30 1.24 1.18 1.02 0.77 0.61 0.51
100 100 2.10 1.97 1.88 1.80 1.73 1.67 1.56 1.44 1.35 1.27 1.21 1.15 1.10 0.99 0.80 0.64 0.53
80 1.95 1.83 1.74 1.67 1.61 1.53 1.39 1.29 1.21 1.14 1.08 1.03 0.99 0.85 0.64 0.51 0.43
Note: the table only represents a feature for preliminar y design and therefore does not replace the necessar y static proof.

Glued Laminated Timber | HASSLACHER group 11

 09
Further processing
Advantages
High precision with optimal material utilisation
Versatile machining options due to modern technology
Ongoing development through regular and continuous quality control
Professional support during the planning phase
Consultation and services provided by qualified master carpenters
Rapid and cost-efficient assembly on the construction site thanks to a high level of prefabrication

Further processing – Special components

Portal Machining Centre CMS Hermagor MAKA BC 570 Kleinheubach
Component X-axis (longitudinal direction) 42 m 35 m or 41 m
dimensions Y-axis (transverse direction) 5.80 m up to 4.80 m
and axes. Z-axis (vertical stroke) 1.25 m uo to 1.60 m
C-axis (rotation) 360° 360°
B-axis (panning) ± 110° ± 105°
Precision ±2 mm to 40 m length ±2 mm to 40 m length
Spindle speed Continuously variable from Continuously variable from
0 to 10,000 rpm 0 to 12,000 rpm
CNC controller NUM 1,060W BWO 920
Online program transfer CAD/CNC-Working Space NC Codes from the CNC- Production
Control
Workpiece measurement Renishaw - Services no services available
Workpiece positioning Supported by laser Supported by laser
Automatic changing of tools Circular magazine with 16 tools 20 tools
Rotary magazine with 2 saw blades saw blade max. 800mm
max. 750mm
Workpiece fixation Using vacuum working blocks and Using flexible vacuum units and
single vacuum units hydraulic clamp cylinders
Import formats *.btl | Direct control of the portal NC Codes generated by post -
system processors.
AlphaCam: CAD-Import: Acis, dwg, dxf,
IGES, Inventor, Rhino, Step
LignoCam: *.btl-Files

IT Interfaces | Import Formats

2D/3D-DXF (*.dxf) | 2D/3D DWG (*.dwg) | ACIS (*.sat) Inventor (*.ipt) (*.iam) (*.3ds) (*.fbx) (*.jt) (*.mwf) (*.dgn)
IFC (*.ifc) | STEP (*.stp) (*.ste) (*.step) | DSTV (*.stp) cadwork (*.2d) und (*.3d)

Further processing – Machining capabilities

5-axis CNC machining Hundegger K3 5-axis 900, Hundegger K2i 5-axis 900 and Hundegger Robot 1,280
6-axis CNC machining Hundegger K2-Industry 1,280 and Hundegger Robot 1,250
Component dimensions Length: up to 27 m
Height: up to 1,280 mm
Width: up to 280 mm

IT Interfaces | Import Formats

(1) *.bvn, *.bvx | Direct control of the systems
(2) From SEMA 3D, Dietrich’s 3D-CAD/CAM and cadwork *.bvn, *.bvx files are created.
(3) 2D/3D *.dxf, *.dwg, *.sat (ACIS) files can be converted into machine files at an extra charge.

12 HASSLACHER group | Glued Laminated Timber

10
Further Processing –
possibilities and
examples
Rafter and Purlin profiles
Profile 1 Profile 2 Profile 3 Profile 4

Profile 5 Profile 6 Profile 7 Profile 8

Valley and hip rafter

Hip rafters Valley rafters Tapered form

Carpentery joints
Rafter notch Cross cogging Stepped joint Double stepped joint Tenon

“Tiroler Schloss”
Forked support Rebate Dovetail joint corner joint Dovetail Log house

Glued Laminated Timber | HASSLACHER group 13

 © Corvin Oelschlaeger, HESS TIMBER

14 HASSLACHER group | Glued Laminated Timber

11
HASSLACHER group
product range

Sawn timber Surfaced timber Structural finger jointed

solid timber & GLT®

Glued solid timber Duo/Trio Glued laminated timber Glulam ceiling

Cross Laminated Timber Glued laminated timber Special products

special components

Pellets Shuttering boards Pallets & packaging solutions

Glued Laminated Timber | HASSLACHER group 15

HASSLACHER group
Feistritz 1 | 9751 Sachsenburg | Austria
T +43 4769 22 49-0 | F +43 4769 22 49-129
info@[Link] | [Link]

HNT PF Brettschichtholz BSH EN 20220623 [Link] | Foto: © Duncan McNichol