100% found this document useful (4 votes)
7K views1 page

Checklist For Equipment Inspection Lifting Tools

This checklist is used to inspect lifting tools and tackles. It contains 9 items to check for defects or safety issues, including wires, slings, shackles, and capacity. The inspector notes "yes", "no", or comments for each item. They then determine if the equipment is fit, partially fit, or unfit. The checklist is signed off by the inspector and reviewer.

Uploaded by

Kaif Siddique
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100% found this document useful (4 votes)
7K views1 page

Checklist For Equipment Inspection Lifting Tools

This checklist is used to inspect lifting tools and tackles. It contains 9 items to check for defects or safety issues, including wires, slings, shackles, and capacity. The inspector notes "yes", "no", or comments for each item. They then determine if the equipment is fit, partially fit, or unfit. The checklist is signed off by the inspector and reviewer.

Uploaded by

Kaif Siddique
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Checklist for Equipment Inspection

Company: Department:
Checklist No. Date:
Make: Model:

Equipment Name & Number: LIFTING TOOLS & TACKLES


Note: Please write Yes or No in the given box and if some comments write in remarks column.
SN. Description Yes/No Remarks
1. Wire sling should be free from defects, e.g.,
corrosion, crack, cuts & oily, etc.
2. Use thimble for making I-shape.
3. Wire rope should be knotted with proper clamp.
4. Web sling should be free from defects, e.g., cuts, abrasion,
knot, hole & oily, etc.
5. I-shape should be free from damages.
6. D-shackle should be in good condition and its face should
not expand more than 15% of its original
Shape.
7. Suitable I-bolt should be used.
8. Lifting tools & tackles should be used having suitable
strength & capacity.
9. Lifting tools & tackles should be handle and store in safe
manner.

FIT PARTIALLY FIT UNFIT


Inspected By Reviewed By
Name: Name:
Signature with date: Signature with date:

You might also like