Spec 2500 Airbus
Spec 2500 Airbus
Certified statement of Oil & Fluid types used in Aircraft, Engines and APU (may be included in
Aircraft status statement).
Certified Incident & Accident Clearance Statement to include Airframe, Engines, Propellers (if
B019 applicable), Landing Gear & APU covering period of operation
B020 Certified installed Software Listing - including part number and revision date
Certified statement of Aircraft Operational Capability:
B021 RVSM, RNP, ETOPS, Landing Category, MNPS, FANS, FM Immunity, 8.33 Spacing, ADS-B etc.
B022 Certified FDR Report verifying that require paramateres are within approved limits
Approved Maintenance Program Summary of Redelivering Airline - including introduction
B023 pages, Last Done/Next Due listing, and if necessary a cross reference table between AMP &
MPD task numbers
Instrument, Data & Equipment Compliance (EU-OPS (EASA CAT.IDE.A) or FAA Operations
B024 Specification)
B025 Reliability Report
C Aircraft Maintenance Records
C001 Inventory of Records and statement confirming True / Accurate Document Translation
C002 Aircraft Technical Logs (PIREPS) (minimum of last 3 years)
C003 A Checks - last complete cycle of A Checks (or equivalent) - including tally sheets and CRS's
C004 Base or 'C' Checks - last complete cycle of Base or 'C' Checks (or equivalent) - including tally
sheets and CRS's
C005 All Major Airframe Scheduled Structural Check Packages (unless included in C003) - including
tally sheets and CRS's
C006 CPCP/ISIP Maintenance Task Cards (unless included in C002, C003 or C004) - including levels of
corrosion found, rectification paperwork, tally sheets and CRS's
C007 File for each Airframe and Appliance Airworthiness Directive - containing copy of AD, original
accomplishment instructions (e.g. EO / SB) and certified maintenance task cards and CRS.
C008 File for each Manufacturer's Service Bulletin incorporated on-wing - containing copy of SB,
certified accomplishment task card and CRS.
C009 EO summary where AD and SB cross referenced on their respective EO
C010 File for each non-OEM modification (including STCs) incorporated on-wing - containing
approved data, regulatory approval, certified accomplishment task card, CRS, Manual
supplements & Instructions for Continued Airworthiness (as applicable).
C011 Files for each Local Mods incorporated or statement of no Local Mods installed
C012 File for each Structural Repair & Allowable Damage incorporated on-wing containing
Regulatory, Manufacturer or SRM instructions (as applicable), revision of data, accomplishment
task card, CRS, & instructions for continued airworthiness
C013 Certified Aircraft Weight Report reflecting current configuration - including weigh check list.
C014 Last Fuel Tank Microbiological Test Report
C015 Last Hydraulic Fluid Test Report
C016 History of prolonged Aircraft and Engine Storage - including associated records
C017 Maintenance Sampling Program
C018 Special inspections or OOP inspections report
C019 Last Repaint Details / DFPs
D Configuration Status
D001 Layout of Passenger Accommodation (LOPA) Drawing - including Seat Part Numbers & Overhaul
Manuals
D002 Emergency Equipment Drawing - including item description and part numbers
D003 Inventory Listing of Loose and Galley Equipment
D004 Inventory Listing of Avionics Units installed
D005 Electrical Load Analisis updated to account for all mods embodied / or statement of the effect
of installed Mods on the ELA from build
D006 Statement of no Free of Charge Mod Kits
D007 Statement of no Loan or PMA Parts
D008 Flight Deck Door Code and Maintenance Codes required (copy of last coding work card/EO)
D009 Statement of no Non Approved EASA CDN FAA Parts
D010 Warranties Transfer of Title (airframe, engines, APU)
D011 List of Cockpit Stowed Media
D012 Flight Data Interface Management Unit (FDIMU) data
E Aircraft Manufacturer Records (Non Model Specific)
E001 Certificate of Airworthiness and/or Certificate of Airworthiness for Export at Manufacture
E002 Manufacturer's Report of Airworthiness Directives incorporated at manufacture
E003 Manufacturer’s Repair/Alteration Report/Significant Repair Log.
E004 Manufacture Flight Log - Hours and Cycles record
E005 Original Log Books / Cards for Aircraft, Engines, Landing gears, APU, Propellers, Main Batteries
(as applicable)
E006 Journey / Tech Log Book for Aircraft (if applicable)
E007 Manufacturer's Detailed Specification / Technical Description - including modifications
incorporated at Manufacture
E008 List of Service Bulletins Incorporated at Manufacture
E009 List of Supplemental Type Certificates (STC) Incorporated at Manufacture
E010 Service Difficulty Reports (if any) / Delivery Inspection Report (as applicable).
E011 List of Manufacturing Concessions / Deviations
E012 Structural Deviation Instruction Report (SDIR) (if applicable)
E013 Manufacturer Original Component Fitted Listing - including part numbers & serial numbers
E014 Manufacturer List of Airframe related Life Limited Parts at Manufacture - including landing
gears
E015 Certified Aircraft Weighing Report at Manufacture.
E016 Certificate of Conformance, Radio Nav & Comms Certificate & Noise Certificate
E017 Production Flight Test Release Certificate
E018 Flying Controls - rigging and balance
E019 Interior Finish Specification Document -including certified statement of compliance with
Flammability Regulations
E020 Pre-delivery Customer Ground Snags / Inspection Report
E021 Paint parameter Check list
E022 Layout of Passenger Accommodation (LOPA) Drawing at Manufacture
E023 Emergency Equipment Drawing at Manufacture
E024 Customer Acceptance Flight Report
E025 AC Software Level Status Parts List (LSAP) at Manufacture
E026 RVSM Compliance Report - Contour Analysis
E027 FDR Download
E028 Certificate of Sanitary Construction (if applicable).
E029 Flight Manuals
E030 Flyway Kit List
E031 Manuals provided at delivery
E032 Loose Equipment Inventory
H002 Airworthiness Release Certificate for each On Condition and Condition Monitored Component
installed since production or evidence of original fit from OEM build listing.
I-A Nose Landing Gear
I001 Certified statement of Total Time & Cycles in Service
I002 Airworthiness Release Certificate from last overhaul & any subsequent maintenance for each
major landing gear assembly
I003 Certified status of Life Limited Parts (LLP's) for each landing gear indicating cycle limit, cycles
consumed since new & Last Done/Next Due related information
I005 Certified Log Cards or equivalent for each Landing gear part showing details of
removal/installation history, cycle limits, cycles consumed since new & Last Done/Next Due
related information
I006 Individual Total Cycle Substantiation Data for each Life Limited Part since manufacture.
I-B LH Main Landing Gear
I001 Certified statement of Total Time & Cycles in Service
I002 Airworthiness Release Certificate from last overhaul & any subsequent maintenance for each
major landing gear assembly
I003 Certified status of Life Limited Parts (LLP's) for each landing gear indicating cycle limit, cycles
consumed since new & Last Done/Next Due related information
I005 Certified Log Cards or equivalent for each Landing gear part showing details of
removal/installation history, cycle limits, cycles consumed since new & Last Done/Next Due
related information
I006 Individual Total Cycle Substantiation Data for each Life Limited Part since manufacture.
I-C RH Main Landing Gear
I001 Certified statement of Total Time & Cycles in Service
I002 Airworthiness Release Certificate from last overhaul & any subsequent maintenance for each
major landing gear assembly
I003 Certified status of Life Limited Parts (LLP's) for each landing gear indicating cycle limit, cycles
consumed since new & Last Done/Next Due related information
I005 Certified Log Cards or equivalent for each Landing gear part showing details of
removal/installation history, cycle limits, cycles consumed since new & Last Done/Next Due
related information
I006 Individual Total Cycle Substantiation Data for each Life Limited Part since manufacture.
MSN 1293 - Sky Angkor Airlines OIL Dec 2021
Folder Name (short) Status Remarks