Scribd
Upload
66 views1 page

SG-390-00 TDS

This document provides information on SG-390-00 Fluid Grease 00 With PAG Oil for Grease Reducer Lubrication. It is a high performance, extreme-pressure grease made from a synthetic base fluid and lithium complex soap thickener. It provides excellent resistance to water washout, wear, rust, and high temperatures. It is recommended for use as an adhesive grease in plain and rolling bearings operating at low speeds in applications resistant to steam and water.

Uploaded by

Rajneesh Rallan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

SG-390-00 TDS

This document provides information on SG-390-00 Fluid Grease 00 With PAG Oil for Grease Reducer Lubrication. It is a high performance, extreme-pressure grease made from a synthetic base fluid and lithium complex soap thickener. It provides excellent resistance to water washout, wear, rust, and high temperatures. It is recommended for use as an adhesive grease in plain and rolling bearings operating at low speeds in applications resistant to steam and water.

Uploaded by

Rajneesh Rallan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SG-390-00

Fluid Grease 00 With PAG Oil for


Grease Reducer Lubrication
GENERAL DESCRIPTION:
Selco SG – 390 is high performance, extreme-pressure greases which combine a synthetic base fluid with a
lithium complex soap thickener. The thickener system provides a high dropping point, excellent resistance to
water wash, and a tenacious structural stability. The unique physical properties of the synthetic base oil,
combined with selective additives, provide outstanding protection against wear, rust, corrosion, and high
temperature degradation. The wax-free feature of the synthetic base oil allows for low-temperature
mobility/pumpability and very low starting and running torque values. Also, the traction property of the
synthetic base fluid in these greases is considerably lower than mineral oil, allowing for temperature
reductions in the load zone of rolling element bearings.
RECOMMENDED USAGE:
Adhesive greases, resistant to steam, good pressure absorption capacity, Suitable as a valve and sealing
grease for plain and rolling bearings operating at low speeds
ADVANTAGES:
• High resistance to wear
• Reduced power loss due to very low coefficients of friction
• Excellent adhesion – reduced lubricant consumption
• Not washed away by water, compatible with boiling water
• Very good protection against corrosion, excellent aging resistance
• Non-toxic in food processing machinery
• Almost absolute evaporation at high temperatures
• Suitable for all direct or indirect types of heating
PROPERTIES:
Property Value Test Method
Base Oil : Synthetic
Operating Temperature : -25 C to + 250 C
Penetration Point : 365-375 : ASTM D 127
Dropping Point : > 250 C : ASTM D 2265
Corrosion Prevention : Pass : ASTM D 1743
Water wash out 790C wt. %, max. : 5.5 : ASTM D 1264

You might also like