SIBUGAY TECHNICAL INSTITUTE INCORPORATED

Lower Taway, Ipil, Zamboanga Sibugay

www.sibugaytech.edu.ph
[email protected]

Detailed Lesson Plan

Electrical Tools and Material

JOHN RONNIEL S. PAYLAGA

NAME

FASRA CHIONG
INSTRUCTOR NAME
 I. Objectives
At the end of the lesson, the students should be able:
a. Discuss what are electrical tools and equipment.
b. Show the picture of electrical materials and devices.
c. Value the importance of electricity.
II. Subject Matter
Topic:

 Prepare Electrical Tools and Material

Reference:

 https://www.slideshare.net/BenandroPalor/eim-78-lesson-1-prepare-electrical-
tools-and-materials
Materials:

 LAPTOP, POWERPIONT
III. Procedure

Teacher’s Activity Student’s Activity

A. Preliminary Activity
a. Prayer:
-Everybody stands up, before -Lord God, thank you much for giving us
we proceed we shall have an another day to study and prepare for a
opening prayer. better life in the future. Thank you for
_____________, kindly lead giving us the chance to continue learning
the opening prayer. amidst the pandemic which caused a lot of
changes in our lives. Bless our parents who
work hard to support our needs. Bless also
our teachers who are doing their best to
inspire and guide us, especially in these
trying times. Bless our country and the
people who continue fighting to stop this
pandemic. Lord, fill us with your wisdom,
knowledge, and understanding. Give us
good memory so that we might understand
and remember what we are going to study
now. These we pray in the name of Jesus
Christ our Lord. Amen!
 b. Greetings
-Good morning class. -Good morning sir, Good morning
-how are you today? classmates.
-We’re good.

c. Checking the attendance

-Who is your secretary in this -Okay sir.
classroom, please check the
attendance.

d. Recalling/ Reviewing
-Okay class, what was our -Our last lesson yesterday is all about
last lesson yesterday? circuits.

e. Collecting the assignment

-None sir.
-Did I give you an
assignment last meeting?

f. Motivation
-Okay sir.
-Okay now let’s proceed to
our new topic, and now I’m
going to show you some
pictures and I want you to
identify them.

g. Reading of the objectives -a. Discuss what are the electrical tools
-Everybody please read. and equipment.

-b. Show the picture of electrical

materials and devices.

-c. Value the importance of electricity.

h. Unlocking difficulties
-Electrical tools are tools used to work on an
electrical system. These can include a wide
range of tools such as wire and cable cutters,
wire strippers, coaxial compression tools,
telephony tools, wire cutters/strippers, cable
tie tools, screwdriver, accessories, and even
more.

- Screwdriver is tools made of steel and

classified according to its tip and used to
loosen or tighten screws.

i. Presentation/ Discussion

-And now let’s proceed to our main

discussion.

-There are 3 types of screwdrivers:

1. Standard screwdriver is also known as a

flathead screwdriver and has a tip that
resembles a negative (-) sign and is used to
drive screws with a single slot head.
2. Philips screwdriver is also known as a
crossed-tip screwdriver or positive (+) head
screwdriver and is used to drive screws with
cross-slot heads.

- CONVENIENCE OUTLET
DESCRIPTION A device that serves as a
3. Stubby screwdriver either a standard or source of electrical energy for electrical
Philips tip but the distinguishing part is the appliances, is basically a device with slots
short handle and shank used for tight spaces. where an appliance plug is inserted. There
are two common types of convenience
outlets such as:
-Electrical materials and devices, this is the
following:

-Is Anyone who can read this, please?

-There are two common types of

convenience outlets such as:
1. Flush type these are convenience outlets
that are embedded in the wall and the
wirings are not exposed.

-MALE PLUG DESCRIPTION A device

with metal prongs attached at the end of the
cord of electrical appliances is inserted into
the slot of the convenience outlet.

-LAMP HOLDERS Also known as

sockets, it is where the bulb or lamp is
2. Surface type is a type of convenience
inserted/secured and supplies electrical
outlet that is installed at the surface of the
energy to energize the bulb
wall and the wirings are exposed, a typical
example is those used in common extension
cords.

-Is Anyone who can read this, please?

-Is Anyone who can read this, please?

-There are 2 types of lamp holders:

1. FLUSH TYPE A type of lamp holder
-SWITCH A device that connects and
wherein the wirings are not exposed or
disconnects the flow of electric current in a
embedded in the ceiling.
circuit.

2. SURFACE TYPE A type of lamp holder

wherein the wiring connections are exposed
to and from the device.

-Is Anyone who can read this, please?

-There are 2 types of switches:

-OVERCURRENT PROTECTIVE
DEVICES- used to protect the electrical
1. FLUSH TYPE A type of switch wherein circuit from dangerous effects of overload
the wirings are not exposed or embedded in or short circuit
the wall.
2. SURFACE TYPE A type of switch
wherein the wirings are exposed or visible in
a wall or surface.

-Is Anyone who can read this, please?

-There are 2 overcurrent protective devices:

1. FUSE A disposable overcurrent protective

device with a strip of wire that melts and
cuts the flow of current in a circuit in case of
overcurrent or short circuit.

-ELECTRICAL BOXES- These may be

made of metal or plastic PVC (Polyvinyl
Chloride)
2. CIRCUIT BREAKER An overcurrent
protective device which automatically blows
and cuts (trips) the current when a short
circuit or overload occurs, once the fault is
corrected, the circuit breaker may be turned
and reused.

-Is Anyone who can read this, please?

There are 2 electrical boxes:

1. JUNCTION BOX An octagonal-shaped

-FLAT CORD DESCRIPTION A duplex
electrical material where the connections or
stranded wire commonly used in extension
joints of wires are being done. It is also
cord assembly and appliance cords, may
where the flush-type lamp holder is attached.
also be used for temporary wiring
installation.

-ELECTRICAL WIRES DESCRIPTION is

Also known as electrical conductors made
of copper or aluminum which are used in
house wiring installations. Its size varies
depending on its application or job
specification There are two types of wires
commonly used Stranded Wire and Solid
 Wire.

2. UTILITY BOX A rectangular-shaped

electrical box where flushed-type
convenience outlets and flushed-type
switches are attached or installed.

-Is Anyone who can read this, please?

Is Anyone who can read this, please?

There are 2 electrical boxes:

1. STRANDED WIRE Made of multiple

strands joined together to make a single wire.
 2. SOLID WIRE Made of a single strand of
copper or aluminum.

j. Application:
Group yourselves into 2 groups and I will assign you one of the electrical materials and
devices and choose one representative to explain what are the use of tools in the picture.

Rubrics:

Total
Category Scoring Criteria Points Score
The type of presentation is appropriate for the
topic and 5
audience.
Organization Information is presented in a logical sequence. 5
(15 points) The presentation appropriately cites a requisite
5
number of references.
The introduction is attention-getting, lays out the
problem well, and
establishes a framework for the rest of the 5

presentation.
Content
Technical terms are well-defined in language
(45 points) appropriate for 5
the target audience.
The presentation contains accurate information. 10
The material included is relevant to the overall
10
message/purpose.
The appropriate amount of material is prepared, 10
and points made
reflect well their relative importance.
 There is an obvious conclusion summarizing the
5
presentation.
Speaker maintains good eye contact with the
audience and is
appropriately animated (e.g., gestures, moving 5

around, etc.).
Speaker uses a clear, audible voice. 5
Delivery is poised, controlled, and smooth. 5
Good language skills and pronunciation are used. 5
Presentation Visual aids are well-prepared, informative,
effective, and not 5
(40 points)
distracting.
The length of the presentation is within the
5
assigned time limits.
Information was well communicated. 10
Score Total Points 100

k. Generalization

-Okay class for our recap what our topic - Electrical Tools and Material.
today?

-Do you have any question or clarification? -None sir.

-Okay class prepare ¼ sheet of paper for our -Okay sir.

short quiz.

IV. Evaluation:
Direction read and answer carefully choose the letter of the correct answer:
1. A tool is known as a flathead screwdriver and has a tip that resembles a negative (-) sign
and is used to drive screws with a single slot head.
A. Standard screwdriver B. Philips screwdriver C. Stubby screwdriver
2. A tool is known as a crossed-tip screwdriver or positive (+) head screwdriver and is used
to drive screws with cross-slot heads.
A. Standard screwdriver B. Philips screwdriver C. Stubby screwdriver
3. A tool standard or Philips tip but the distinguishing part is the short handle and shank used
for tight spaces.
A. Standard screwdriver B. Philips screwdriver C. Stubby screwdriver
4. A device that connects and disconnects the flow of electric current in a circuit.
A. Switch B. Fuse C. Circuit breaker
5. A disposable overcurrent protective device with a strip of wire that melts and cuts the flow
of current in a circuit in case of overcurrent or short circuits.
A. Switch B. Fuse C. Circuit breaker
6. An overcurrent protective device that automatically blows and cuts (trips) the current when
a short circuit or overload occurs, once the fault is corrected, the circuit breaker may be
turned and reused.
A. Switch B. Fuse C. Circuit breaker
7. An octagonal-shaped electrical material where the connections or joints of wires are being
done. It is also where the flush-type lamp holder is attached.
A. Junction box B. Utility box C. Stranded wire
8. A rectangular-shaped electrical box where flushed-type convenience outlets and flushed-
type switches are attached or installed.
A. Junction box B. Utility box C. Stranded wire
9. Made of multiple strands joined together to make a single wire.
A. Junction box B. Utility box C. Stranded wire
10. Made of a single strand of copper or aluminum.
A. Solid wire B. Fuse C. Switch
Answer key:
1. A 3. C 5. B 7. A 9. C
2. B 4. A 6. C 8. B 10. A
V. Assignment
Direction: Draw one of the electrical supplies have 50 points.