Only products bearing the NSF, SASO, WRAS, DVGW and SKZ Mark 1

are certified by those organizations.

ABOUT US
Almona is a leading Saudi Arabian plastic pipe manufacturing company and
since our establishment in 2008 we have constantly evolved to meet the re-
quirements of our most demanding customers. Our aim is to provide sophisti-
cated and diverse pipe solutions for hot and cold water applications, telecom-
munication networks, sewage and drainage systems together with water and
gas infrastructure.

We are a certified to ISO 9001:2015 Quality Management Systems organi-

zation and all our products comply with the appropriate Saudi (SASO), Ger-
man (DIN) and International (ISO) Standards. Our pipe systems for drinking
water applications are NSF-61, WRAS and DVGW certified and all almona
products are tested extensively in our state-of-the-art laboratory, to en-
sure that the quality and performance are continuously maintained.

Almona’s success is the result of the company’s persistent commitment

to continuous innovation and investment in technology, in the relentless
pursuit of providing quality products and services. Today, we are pleased
to offer a wide range of plastic products, divided into four categories:

BUILDINGS SEWAGE AND INFRASTRUCTURE TELECOMMUNICATION

DRAINAGE DUCTING

WE DESIGN, DEVELOP, MANUFACTURE

AND PROVIDE INNOVATIVE PIPE
SOLUTIONS THAT BEST MEET THE
NEEDS OF OUR CUSTOMERS

2
CHARACTERISTICS OF
almona PE SILICONE CORE
MICRO DUCTS SYSTEMS
Installation DIRECT BURIED (DB): In applications where the micro ducts
will be directly buried or bundled into different configurations.
DIRECT INSTALL (DI): In applications where the micro ducts
or bundle configuration will be placed inside an existing
conduit, like an Over-Ride or populating an existing conduit.

Area of applications Telecommunication (voice and data)

CATV (television cables)
Commercial and institutional buildings (C&I)
Energy cables

Colors
RAL 2004 RAL 3024 RAL 5012 RAL 6038 RAL 1021

RAL 9007 RAL 8016 RAL 9010 RAL 4001

Custom colours for micro ducts and corrugated sheaths are
available on request

Micro ducts Silicon core micro ducts system comprises of an outer sheath
technology and multiple micro ducts.
micro ducts are made from High Density Polyethylene
(HDPE), whilst the inner surface of the micro ducts is
made from permanent silicon material having a very low
coefficient of friction
outer sheath is made of HDPE
Factory bundles in 2-way, 3-way, 4-way, 7-way, 10-way,
14-way and 24-way configurations

Optional Silicone core is co-extruded with the tough HDPE wall

creating a permanent, super slippery interior lining. It has the
lowest co-efficient of friction compared to other options, no
performance loss in all temperature conditions and functions
without additional wet lubricants.
Insulated copper wire for quick and easy localization.
For single micro-duct tracing wire is placed outside and
over-sheathed together with duct. Within bundles, tracing
wire is placed in the free space among the micro-ducts.
Rip cords for easy and quick opening of the polyethylene
sheath.
Thicker over sheath for demanding projects and installation.
Footage markings such sequential or meter marking available
on customer request.

3
ADVANTAGES OF almona PE MICRO
SILICONE CORE DUCTS SYSTEMS
40°C

-20°C

Multiple Operation, storage and Fast and easy

configurations installation installation of any
and colors at temperatures fiber optic cable due to
ranging from silicone core
-20°C to +40°C

Resistant to ground Pull out resistance Blow-ability

movement due to during installation Pressure resistance
flexibility of micro during optical fiber
ducts blow-in process

Excellent flexibility Low electrical Water infiltration

and shape recovery and thermal resistance during
conductivity storage, installation
and operation

UV resistance Corrosion free system 100% recyclable

during storage and operation and sustainable
installation systems

4
PRODUCT RANGE
Single silicone core micro-ducts and conduit silicone
core micro-ducts

Almona offers a wide product range of silicone core micro-ducts for

both DB and DI, as shown in the following table:

microduct wall minimum max

burst
application OD Tolerance bending blowing
size OD/ID thickness pressure
DB/DI (mm) (mm) radius 20oC pressure
(mm) (mm) (bar)
(mm) (bar)
DI 4/3 0.5 4 ±0.05 80 10 > 30
DI 5/3.5 0.75 5 ±0.05 100 10 > 30
DB 7/4 1.5 7 ±0.15 140 16 > 50
DI 7/5.5 0.75 7 ±0.15 140 10 > 30
DB 8/3.5 2.25 8 ±0.15 200 16 > 50
DB 10/6 2 10 ±0.15 240 16 > 50
DI 10/8 1 10 ±0.15 200 10 > 30
DB 12/8 2 12 ±0.15 280 16 > 50
DI 12/10 1 12 ±0.15 240 10 > 30
DB 14/10 2 14 ±0.15 280 16 > 50
DI 14/11.5 1.25 14 ±0.15 280 10 > 30
DB 16/10 3 16 ±0.15 320 16 > 50
DI 16/12 2 16 ±0.15 320 10 > 30
DB 18/12 3 18 ±0.30 360 16 > 50
DI 18/14 2 18 ±0.30 360 10 > 30

Almona silicone core conduit micro-ducts product range is provided in the

following table:

ID Coil length
Part No.
(mm) (m)
21 901 16 40
21 902 23 40
Additional sizes up to 63 mm outer diameter (OD) are available on request.

5
Silicon Core 2-Way Micro-Duct Bundle
Almona offers a wide product range of silicone core 2-Way micro-ducts for
both DB and DI, as shown in the following table:

microduct protective minimum Insulated

application sheath OD bending Cooper
size OD/ID
DB/DI thickness (mm) radius 20oC Wire
(mm)
(mm) (mm) (mm)*
DI 4/3 1 10/6 200 0.6
DI 5/3.5 1 12/7 240 0.6
DI 7/5.5 1 16/9 320 0.6
DI 10/8 1 22/12 440 0.6
DI 12/10 1 26/14 520 0.6
DI 14/11.5 1 30/16 600 0.6
DB 14/10 1.2 30/16 600 0.6
DB 16/12 1.2 32/18 640 0.6
DB 18/14 1.2 38/20 760 0.6
*insulated copper wire can be added upon request

Silicon Core 3-Way Micro-Duct Bundle

Almona offers a wide product range of silicone core 3-Way micro-ducts for
both DB and DI, as shown in the following table:

microduct protective minimum Insulated

application sheath OD bending Cooper
size OD/ID
DB/DI thickness (mm) radius 20oC Wire
(mm)
(mm) (mm) (mm)*
DI 4/3 1 10/10 200 0.6
DI 5/3.5 1 12/12 240 0.6
DI 7/5.5 1 16/16 320 0.6
DI 10/8 1 22/22 440 0.6
DI 12/10 1 26/26 520 0.6
DI 14/11.5 1 30/30 600 0.6
DB 14/10 1.2 30/30 600 0.6
DB 16/12 1.2 32/32 640 0.6
DB 18/14 1.2 38/38 760 0.6
*insulated copper wire can be added upon request

6
Silicon Core 4-Way Micro-Duct Bundle
Almona offers a wide product range of silicone core 4-Way micro-ducts for
both DB and DI, as shown in the following table:

microduct protective minimum Insulated

application sheath OD bending Cooper
size OD/ID
DB/DI thickness (mm) radius 20oC Wire
(mm)
(mm) (mm) (mm)*
DI 4/3 1 10/10 200 0.6
DI 5/3.5 1 12/12 240 0.6
DI 7/5.5 1 16/16 320 0.6
DI 10/8 1 22/22 440 0.6
DI 12/10 1 26/26 520 0.6
DI 14/11.5 1 30/30 600 0.6
DB 14/10 1.2 30/30 600 0.6
DB 16/12 1.2 32/32 640 0.6
DB 18/14 1.2 38/38 760 0.6
*insulated copper wire can be added upon request

Silicon Core 7-Way Micro-Duct Bundle

Almona offers a wide product range of silicone core 7-Way micro-ducts for
both DB and DI, as shown in the following table:

microduct protective minimum Insulated

application sheath OD bending Cooper
size OD/ID
DB/DI thickness (mm) radius 20oC Wire
(mm)
(mm) (mm) (mm)*
DI 4/3 1 14/14 420 0.6
DI 5/3.5 1 17/17 510 0.6
DI 7/5.5 1 23/23 690 0.6
DI 10/8 1 32/32 960 0.6
DI 12/10 1 38/38 1,140 0.6
DI 14/11.5 1 44/44 1,320 0.6
DB 14/10 1.2 44.4/44.4 1,320 0.6
DB 16/12 1.2 50.4/50.4 1,500 0.6
*insulated copper wire can be added upon request

Accessories for almona silicone core micro-ducts

Almona offers a new generation innovative accessories for silicon core and
conduit micro-ducts such as connectors, reducers, locking clips, stripping
tools, peeling equipment and bundle cutters.

7
Connectors
Metal free connectors avoid corrosion problems in DB and DI applications.
High quality materials and a transparent body assure easy and quick in-
stallation. DB connectors shall be protected with rubber protection caps
for proper DB functionality. DI connectors are designed to fit with thin-
walled silicone core micro-ducts and are for any applications that are not
directly buried, including inside buildings and manholes or branching boxes.

Reducing connectors allow interconnection between two silicone core mi-

cro-ducts with different outer diameter. Typically, this is the case at the tran-
sition point from DB to DI micro-duct at the point where it enters a building.

The end caps are metal free and have a transparent body. The pre-in-
stalled safety clips provide for quick and easy installation whilst keep-
ing the micro-ducts clean and dry. All open silicone core micro-duct ends
should be closed to keep the network free of contamination. Special rub-
ber covers are recommended for direct burial (DB) applications to secure
easy and smooth push-fit functionality of the connectors.

Main features and characteristics of almona DB and DI connectors, re-

ducers and end caps are summarized below:

No metal parts
Inner diameter leveled with micro-ducts
Push-fit system
Safety clips pre-installed
Body material: polyamide
Working Pressure: max. 20 bars
Lifespan: 25 years
Standards: EN 50411-2-8

Connector for direct buried

Reducer End
(DB) and direct install (DI)
applications Connector caps

Locking Compression
Clips Connector

8
 Compression connectors offer solutions for connecting HDPE ducts. The
connector is designed to withstand working pressures of up to 16 bar. These
compression connectors are manufactured in diameters ranging between
16 mm and 160 mm.

Main features and characteristics of almona compression connectors are

summarized below:

No metal parts
Manufactured from polypropylene material
High quality
Maximum operation pressure is 16 Bars

Stripping Tools

Almona provides a new generation innovative stripping tools, peeling equip-

ment and bundle cutters for easy installation of silicone core micro-ducts
systems

Cable stripping Micro-duct Stripping

knife cutter knife

Peeling Bundle
equipment cutter

9
 Saudi made
‫صنع بالسعودية‬
High quality
‫جودة عالية‬

T +966 11 410 2326 P.O. Box: 270736 Riyadh 11352 ‫رشكة مصنع امل ُنى للمنتجات البالستيكية‬
E [email protected] Kingdom of Saudi Arabia Almona Plastic Products Ltd. Co.

10