QF20-08

QualFast Table Of Contents

Component (Prefix) Page

Performance Cylinder Heads (15-) .......................................................1

Performance Cylinder Head Kits (15-*-K) ............................................2
Street Performance Valves (53-) ...........................................................4
Black Lightning Racing Valves (77-) ....................................................6
NEW Black Lightning Diesel Performance Valves (77-) ...................8
High Performance Valve Stem Seals (38-) ...........................................9
Manganese Bronze and Hardened Cast Iron Guides (30- & 31-) .....10
High Performance Springs (52-) .........................................................12
High Performance Keepers (34-) ........................................................13
High Performance Spring Kits (52-*-SK) ............................................14
High Performance Retainers (55-) ......................................................16
High Performance Spring Inserts, Cups, and Locators (33-) ...........17
Performance Rocker Arms (40-) and Roller Rocker Sets (45-) ........18
Performance Rocker Kits (41-) and Rocker Studs (42-)....................19
Push Rods (74-) ...................................................................................20
Push Rod Measuring Tools (74-) ........................................................20
Performance Lifters and Lifter Guides (36-) ......................................20
Guide Plates (75-) ................................................................................21

Warranty / Disclaimer
Performance application parts are without any express warranty or implied warranty.
The purchaser is solely responsible for determining the suitability of any and all
products obtained from QualCast, LLC, for any given application or purpose. Purchaser
understands that all parts listed in catalog offered by QualCast are subject to varied
conditions beyond the control of QualCast. The decision to use any product or service
for any application or situation rests entirely upon said purchaser. The purchaser further
agrees that anything received from QualCast carries no warranty, fitness of purpose, or
guarantee of merchantability. This applies to all things expressed or implied, oral or
written to purchaser and/or end user.

Cover photo of “Knight Train” courtesy of Alligator Performance, Coeur D’Alene, Idaho,
www.AlligatorPerformance.com

All manufacturers’ names, numbers and descriptions are used for reference purposes only and do not imply that any
part listed is the product of those manufacturers.
 QUALFAST PERFORMANCE CYLINDER HEADS
New Performance Cylinder Heads are individually cast using the latest techniques. All machined
surfaces are performed by CNC, including bolt holes, to achieve extreme accuracy in finishing. OEM
bolt patterns are used for compatibility.

Meets and exceeds OEM specifications Custom-designed heads

Chambers designed for improved flow Heat-treated T6 Aluminum

Part No Intake Runner CC Chamber CC Intake Shape Note

Photo Application Exhaust Runner CC Plugs Exhaust Shape

15-120011 196 64 Rectangle

SBC Aluminum 69 Straight Rectangle

15-121231 212 57 Cathedral

LS1 Aluminum 76 Angle Irregular

15-125041 250 57 Rectangle

LS3 Aluminum 82 Angle Irregular

15-125551 255 59 Rectangle

LS7 Aluminum 85 Angle Irregular

15-132722 327 119 Oval Accepts 75-107 or

75-700 Guide Plate

BBC Oval Aluminum 146 Angle Rectangle

15-133021 330 126 Rectangle Accepts 75-107 or

75-700 Guide Plate

BBC Aluminum 123 Angle Irregular

15-219011 190 60 Rectangle 289, 302 Requires

1/2"-7/16" Stepped
Head Bolt
SBF Aluminum 74 Angle Rectangle

15-226521 265 87 Oval Wider Push Rod

Bores

BBF Aluminum 95 Angle Irregular

Page 1
 QUALFAST PERFORMANCE CYLINDER HEAD KITS
Head Kits are for one engine and can be customized with your requested components.
The below kits are examples with common components.

Springs-16 Retainers-16 Spring Cup-16 Keepers-32 Stem Seal-16

Kit # Description
Notes Cyl. Heads-2 Exh. Valve-8 Int. Valve-8 Guide Plate-8 Rock. Stud-16
Small Block Chevrolet
15-120011-K01 SBC Std. 53- 52-10010 55-6100 33-5270 34-555 38-532-55
15-120011 53-100160 53-100202 75-100 42-4920
15-120011-K02 SBC +100 53- 52-27270 55-6302 33-5126-5 34-555 38-532-55
15-120011 53-1001601 53-1002021 75-100 42-4920
15-120011-K06 SBC Std. 77- 52-10010 55-6100 33-5270 34-555 38-532-55
15-120011 77-160001 77-202001 75-100 42-4920
15-120011-K11 SBC +100 53- 52-57470 55-6100 33-5270 34-555 38-532-55
15-120011 53-1001601 53-1002021 75-100 42-4920
15-120011-K16 SBC +100 77- 52-57470 55-6100 33-5270 34-555 38-532-55
15-120011 77-160101 77-202101 75-100 42-4920
LS1
15-121231-K01 LS1 53- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-121231 53-108157 53-108202
15-121231-K02 LS1 53- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-121231 53-108157 53-108202
15-121231-K06 LS1 77- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-121231 77-160008 77-202008
15-121231-K07 LS1 77- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-121231 77-160008 77-202008
LS3
15-125041-K01 LS3 53- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-125041 53-108159 53-108216
15-125041-K02 LS3 53- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-125041 53-108159 53-108216
Page 2
 QUALFAST PERFORMANCE CYLINDER HEAD KITS
Kit # Description Springs-16 Retainers-16 Spring Cup-16 Keepers-32 Stem Seal-16

Notes Cyl. Heads-2 Exh. Valve-8 Int. Valve-8 Guide Plate-8 Rock. Stud-16
LS3 (Continued)
15-125041-K03 LS3 53- Dual 52-65810 55-8123 33-8251-L 34-7005 38-900-45
Machined Keeper, Titanium Retainer 15-125041 53-108159 53-108216
15-125041-K06 LS3 77- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-125041 77-159038 77-216038
15-125041-K07 LS3 77- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-125041 77-159038 77-216038
LS7
15-125551-K01 LS7 53- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-125551 53-108161 53-108221
15-125551-K02 LS7 53- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-125551 53-108161 53-108221
15-125551-K06 LS7 77- Conical 52-65000 55-6103 33-8251-L 34-5005 38-900-45
15-125551 77-161078 77-220078
15-125551-K07 LS7 77- Dual 52-65810 55-6922 33-8251-L 34-5005 38-900-45
15-125551 77-161078 77-220078
Big Block Chevrolet Oval Port
15-132722-K21 BBC Oval 53- 52-46970 55-6303 33-5146 34-555 38-532-55
Longer Int. Valve, May Req. Rotator Eliminator 15-132722 53-1001881 15-1022525 75-700 42-2941
15-132722-K26 BBC Oval 77- 52-46970 55-6303 33-5146 34-555 38-532-55
Longer Int. Valve, May Req. Rotator Eliminator 15-132722 77-188101 77-225251 75-700 42-2941
Big Block Chevrolet Rectangle Port
15-133021-K01 BBC Rect. + 53- 52-46970 55-6303 33-5146 34-555 38-532-55
Longer Int. Valve, May Req. Rotator Eliminator 15-133021 53-100188 53-1002251 75-700 42-2941
15-133021-K02 BBC Rect. Std. 53- 52-46970 55-6303 33-5146 34-555 38-532-55
May Req. Rotator Eliminator 15-133021 53-100188 53-100225 75-700 42-2941
15-133021-K21 BBC Rect. + 53- 52-46970 55-6303 33-5146 34-555 38-532-55
Longer Int. Valve, May Req. Rotator Eliminator 15-133021 53-1001881 53-1022525 75-700 42-2941
15-133021-K26 BBC Rect. + 77- 52-46970 55-6303 33-5146 34-555 38-532-55
Longer Int. Valve, May Req. Rotator Eliminator 15-133021 77-188101 77-225251 75-700 42-2941
Small Block Ford
15-219011-K01 SBF 53- 52-27270 55-6302 33-5126-5 34-555 38-532-55
15-219011 53-1001601 53-1002021 75-110 42-2940
15-219011-K02 SBF 53- 52-27410 55-6302 33-5126-5 34-555 38-532-55
15-219011 53-1001601 53-1002021 75-110 42-2940
15-219011-K03 SBF 53- 52-27270 55-6302 33-5126-5 34-555 38-532-55
15-219011 53-1001601 53-1002021 75-110 42-4920
15-219011-K06 SBF 77- 52-27410 55-6302 33-5126-5 34-555 38-532-55
15-219011 77-160021 77-202021 75-110 42-2940
Big Block Ford
15-226521-K01 BBF 53- 52-46970 55-6303 33-5146 34-555 38-532-55
15-226521 53-534178 53-541219 75-112 42-2940
15-226521-K06 BBF 77- 52-46970 55-6303 33-5146 34-555 38-532-55
15-226521 77-176041 77-219041 75-112 42-2940

Page 3
 QUALFAST STREET PERFORMANCE VALVES
Our "53-" Street Performance valves are made of a high grade stainless (21-2N) steel, for street
and mild racing applications, manufactured to the same precision as our other series including
swirl polished underheads and undercut stems. Packaged in matched sets of 8 per box.

Swirl Polished Underheads

Chrome-Plated Stems

Wafer-Welded Tips

Undercut Stems

Part No Head Diameter Length Stem Diameter I/E Tip No. Grv Note

Small Block Chevrolet

53-100150 1.500 4.910 0.3414 Exh 0.250 1
53-120150 1.500 4.910 0.3414 Exh 0.290 2
53-100150+3 1.500 4.910 0.3445 Exh 0.250 1
53-120160 1.600 4.898 0.3414 Exh 0.290 2
53-100160 1.600 4.930 0.3414 Exh 0.250 1
53-100160+3 1.600 4.930 0.3445 Int 0.250 1
53-1001601 1.600 5.020 0.3414 Exh 0.250 1
53-100163 1.625 4.908 0.3414 Exh 0.250 1
53-120184 1.835 4.903 0.3414 Int 0.250 2
53-120194 1.940 4.870 0.3414 Int 0.250 1
53-100194 1.940 4.910 0.3414 Int 0.250 1
53-100194+3 1.940 4.910 0.3445 Int 0.250 1
53-1001941 1.940 5.010 0.3414 Int 0.250 1
53-120202 2.020 4.890 0.3414 Int 0.250 2
53-100202 2.020 4.910 0.3414 Int 0.250 1
53-100202+3 2.020 4.910 0.3445 Int 0.250 1
53-1002021 2.020 5.010 0.3414 Int 0.250 1
53-100205 2.057 4.910 0.3414 Int 0.250 1
53-1002051 2.057 5.010 0.3414 Int 0.250 1
53-100208 2.081 4.910 0.3414 Int 0.250 1
53-1002081 2.081 5.010 0.3414 Int 0.250 1
Chevrolet LS
53-108157 1.570 4.920 0.3134 Exh 0.160 1 LS1
53-158159 1.590 5.450 0.3135 Exh 0.341 1 LS3, 21-4N Matl.
53-108159 1.593 4.914 0.3136 Exh 0.204 1 LS3
53-108161 1.613 5.226 0.3134 Exh 0.334 1 LS7, 21-4N Matl.
53-108202 2.020 4.880 0.3138 Int 0.160 1 LS1
53-108216 2.165 4.890 0.3135 Int 0.225 1 LS3
53-158216 2.165 5.450 0.3135 Int 0.340 1 LS3 Int. 21-4N
53-108221 2.205 5.226 0.3134 Int 0.334 1 LS7, 21-4N Matl.
Big Block Chevrolet
53-500175 1.720 5.354 0.3710 Exh 0.220 1
53-100188 1.880 5.350 0.3414 Exh 0.220 1
53-500188 1.880 5.360 0.3719 Exh 0.220 1
53-1001881 1.880 5.450 0.3414 Exh 0.220 1
53-1018815 1.880 5.500 0.3414 Exh 0.220 2
53-500207 2.065 5.217 0.3719 Int 0.220 1
53-500219 2.190 5.217 0.3719 Int 0.220 1
53-100225 2.250 5.217 0.3414 Int 0.220 1
53-500225 2.250 5.236 0.3710 Int 0.220 1

Page 4
 Part No Head Diameter Length Stem Diameter I/E Tip No. Grv Note

53-1002251 2.250 5.317 0.3414 Int 0.220 1

53-1022525 2.250 5.467 0.3414 Int 0.220 1
Olds / Pontiac V8
53-350163 1.625 4.711 0.3410 Exh 0.250 1
53-350173 1.720 4.695 0.3415 Exh 0.250 1
53-401177 1.770 5.090 0.3414 Exh 0.220 1
53-402177 1.770 5.220 0.3414 Exh 0.220 2
53-350207 2.070 4.673 0.3415 Int 0.250 1 45 Deg.
53-401211 2.110 5.090 0.3414 Int 0.220 1 30 Deg
53-402211 2.110 5.210 0.3414 Int 0.220 2 30 Deg
Small Block Ford
53-525154 1.540 5.075 0.3410 Exh 0.400 1
53-527160 1.600 5.074 0.3410 Exh 0.400 1
53-531166 1.655 5.070 0.3414 Exh 0.270 1
53-529177 1.710 5.047 0.3414 Exh 0.220 1
53-526184 1.840 5.070 0.3410 Int 0.390 1
53-528190 1.900 5.079 0.3414 Int 0.400 1
53-532204 2.041 5.225 0.3414 Int 0.256 1
NEW Ford 4.6L & 5.4L SOHC 2V
53-564141 1.418 4.650 0.2740 Exh 0.470 3
53-564175 1.752 4.705 0.2750 Int 0.470 3
NEW Ford 4.6L & 5.4L DOHC 4V
53-565118 1.181 4.587 0.2740 Exh 0.425 3
53-565145 1.457 5.339 0.2750 Int 0.620 3
Ford Big Block
53-535156 1.556 5.445 0.3705 Exh 0.320 1
53-537166 1.655 5.434 0.3705 Exh 0.320 1
53-541175 1.740 5.070 0.3414 Exh 0.346 1
53-539173 1.752 5.434 0.3710 Exh 0.321 1
53-547176 1.760 4.970 0.3410 Exh 0.400 1
53-534178 1.780 5.070 0.3414 Exh 0.400 1
53-546208 2.083 5.206 0.3414 Int 0.340 1
53-536209 2.090 5.449 0.3705 Int 0.305 1 30 Deg.
53-530219 2.190 5.225 0.3414 Int 0.280 1
53-540219 2.190 5.445 0.3710 Int 0.320 1
53-541219 2.195 5.242 0.3421 Int 0.274 1
53-548225 2.250 5.224 0.3410 Int 0.345 1
53-542225 2.250 5.298 0.3410 Int 0.290 1 Not SS, Int. Matl.
Chrysler Small Block
53-700160 1.600 5.005 0.3710 Exh 0.214 4
53-700202 2.020 4.986 0.3710 Int 0.210 4
Chrysler Big Block
53-720174 1.740 4.880 0.3719 Exh 0.220 4
53-720209 2.090 4.880 0.3719 Int 0.280 2
NEW Chrysler / Dodge 5.7L Hemi
53-756155 1.555 4.845 0.3120 Exh 0.120 3
53-757155 1.555 5.125 0.3120 Exh 0.120 3
53-756200 2.000 4.955 0.3125 Int 0.120 3
53-757205 2.050 5.176 0.3125 Int 0.120 3
NEW Subaru 2.0L DOHC EJ205, 2.5L EJ257
53-625128 1.260 4.124 0.2345 Exh 0.138 1
53-625126 1.260 4.124 0.2345 Exh 0.138 1
53-625141 1.417 4.118 0.2345 Int 0.138 1

Page 5
 QUALFAST BLACK LIGHTNING RACING VALVES
Part No Head Diameter Length Stem Diameter I/E Tip Note

Small Block Chevrolet

77-150001 1.500 4.910 0.3410 Exh 0.250
77-160001 1.600 4.925 0.3410 Exh 0.250
77-160101 1.600 5.025 0.3410 Exh 0.250 +100
77-160201 1.600 5.125 0.3410 Exh 0.250 +200
77-163101 1.625 5.025 0.3410 Exh 0.250
77-194001 1.940 4.910 0.3410 Int 0.250
77-202001 2.020 4.920 0.3410 Int 0.250
77-202101 2.020 5.020 0.3410 Int 0.250 +100
77-202201 2.020 5.120 0.3410 Int 0.250 +200
77-206101 2.055 5.020 0.3410 Int 0.250 +100
77-208101 2.080 5.020 0.3410 Int 0.250 +100
Chevrolet LS
77-157008 1.570 4.910 0.3134 Exh 0.160 LS1
77-159038 1.590 4.914 0.3136 Exh 0.204 LS3
77-160008 1.600 4.910 0.3134 Exh 0.160 LS1
77-161078 1.613 5.226 0.3134 Exh 0.334 LS7
77-202008 2.020 4.870 0.3138 Int 0.160 LS1
77-206008 2.055 4.870 0.3138 Int 0.160 LS1
77-216038 2.165 4.890 0.3135 Int 0.225 LS3
77-220078 2.205 5.226 0.3134 Int 0.334 LS7
Big Block Chevrolet
77-173003 1.725 5.350 0.3710 Exh 0.220
77-188001 1.880 5.350 0.3410 Exh 0.220
77-188101 1.880 5.450 0.3410 Exh 0.220 +100
77-188003 1.880 5.350 0.3710 Exh 0.220
77-207003 2.065 5.220 0.3710 Int 0.220
77-219003 2.190 5.220 0.3710 Int 0.220
77-225101 2.250 5.320 0.3410 Int 0.220 +100
77-225251 2.250 5.470 0.3410 Int 0.220 +250
77-225003 2.250 5.220 0.3710 Int 0.220
77-230101 2.300 5.320 0.3410 Int 0.220 +100
77-230251 2.300 5.470 0.3410 Int 0.220 +250
Small Block Ford
77-160021 1.600 5.090 0.3410 Exh 0.395
77-202021 2.020 5.090 0.3410 Int 0.395
NEW Ford "Coyote" 5.0L DOHC 4V
77-122250 1.220 4.274 0.2340 Exh 0.305
77-146250 1.457 4.722 0.2355 Int 0.365
Ford Big Block
77-176041 1.760 5.050 0.3410 Exh 0.340
77-219041 2.190 5.242 0.3410 Int 0.274

Page 7
 Our Black Lightning diesel performance valves are
designed for maximum efficiency, withstanding the
extreme conditions of a turbo diesel engine.

The exhaust valves utilize an Inconel 751 head. This

Super Alloy has a very high nickel content.

Intake valves have 21-4N stainless steel heads.

Both our intake and exhaust valves employ a mid-
stem 'friction weld'.

All Black Lightening diesel performance valves

have a hardened tip and a black nitride finish to
the entire valve, including the top of the head. The
seat face remains precision machined.
NEW

Part No Head Diameter Length Stem Diameter I/E Tip

Dodge/CUM 5.9L 12V

77-165008 1.654 5.081 0.3132 Exh 0.236
77-177008 1.772 5.084 0.3138 Int 0.236
Dodge/CUM 5.9L 24V ISB
77-129017 1.299 4.893 0.2746 Exh 0.300
77-129007 1.299 4.907 0.2756 Int 0.299
Ford 6.0L Powerstroke
77-110007 1.102 5.059 0.2735 Exh 0.358
77-133008 1.339 5.059 0.2738 Int 0.358
Ford 6.4L Powerstroke
77-116007 1.161 5.138 0.2734 Exh 0.433
77-133007 1.339 5.138 0.2738 Int 0.433
Ford 6.7L Powerstroke
77-119007 1.195 5.242 0.2748 Exh 0.699
77-133017 1.331 5.242 0.2744 Int 0.699
GM 6.6L Duramax
77-122007 1.220 4.965 0.2730 Exh 0.519
77-129057 1.299 4.975 0.2735 Int 0.519

Page 8
 QUALFAST HIGH PERFORMANCE VALVE STEM SEALS
HP TE
H.P. Polymer All Teflon

Nom. Nom. Nom. Nom.

Stem Guide Stem Guide
Part No Dia. O.D. Part No Dia. O.D.
A B C D A B C D

38-1007-90 11/32 0.530 0.336 0.630 0.458 0.523 38-1046-75 0.313 0.530 0.292 0.640 0.510 0.512
38-1006-90 11/32 0.500 0.339 0.604 0.505 0.488 38-1053-75 0.313 0.415 0.293 0.500 0.510 0.390
38-1008-90 3/8 0.530 0.373 0.625 0.459 0.513 38-1090-75 11/32 0.500 0.319 0.640 0.510 0.470
MC 38-1066-75 11/32 0.530 0.328 0.630 0.510 0.509
38-1067-75 11/32 .524 0.340 0.630 0.510 0.502
Metal Clad
38-1091-75 3/8 0.500 0.354 0.600 0.510 0.474
TH
Top Hat

Nom. Nom.
Stem Guide
Part No Dia. O.D. A B C D

38-592-55 0.216 0.436 0.187 0.507 0.393 0.429 Nom. Nom.

Stem Guide
38-996-55 0.260 0.472 0.225 0.582 0.480 0.465 Part No Dia. O.D. A B C D
38-997-45 0.275 0.476 0.235 0.562 0.517 0.470
38-569-45 0.260 0.476 0.237 0.541 0.410 0.470 38-3500-45 0.236 0.395 0.210 0.382 0.625 0.390
38-802-45 0.313 0.531 0.272 0.677 0.516 0.519 38-111-45 0.275 0.495 0.243 1.108 0.804 0.488
38-3995-55 0.315 0.428 0.274 0.556 0.412 0.408 38-901-45 0.313 0.500 0.282 1.185 0.884 0.490
38-804-45 0.313 0.502 0.275 0.623 0.531 0.491 38-900-45 0.314 0.500 0.286 1.187 0.887 0.492
38-8500-55 0.313 0.500 0.275 0.546 0.498 0.497
38-8530-55 0.313 0.531 0.275 0.575 0.498 0.527
38-967-55 0.315 0.514 0.280 0.610 0.398 0.503
38-371-45 0.344 0.552 0.295 0.671 0.496 0.543
38-107-55 0.344 0.500 0.300 0.635 0.530 0.482
38-805-55 0.315 0.500 0.300 0.662 0.515 0.491
38-108-45 0.344 0.502 0.303 0.620 0.524 0.494
38-532-55 0.344 0.531 0.303 0.674 0.527 0.523
38-9500-55 0.344 0.500 0.304 0.546 0.498 0.497
38-9530-55 0.344 0.530 0.304 0.575 0.498 0.527
38-806-55 0.344 0.562 0.307 0.661 0.518 0.550
38-805-45 0.344 0.562 0.308 0.6615 0.5145 0.544
38-403-45 0.375 0.625 0.335 0.741 0.530 0.617
38-375-55 0.375 0.530 0.338 0.677 0.520 0.516
38-373-55 0.375 0.500 0.340 0.623 0.530 0.488
38-377-45 0.375 0.562 0.343 0.661 0.516 0.553

Material -45, 55 Viton/Metal -90 High Performance Polymer

Denoted by Page 9
Suffix: -75 All Teflon Please Refer To Our QualCast Catalog for over 200
additional stem seals in various materials.
 MANGANESE BRONZE AND HARDENED CAST IRON GUIDES
Manganese Bronze guides are precision machined Our Hardened Cast Iron Guides are
from the highest quality, specially formulated material. manufactured from a special premium cast iron
This material offers improved thermal conductivity, alloy, then heat treated to 25 Rockwell C.
lower friction, higher strength, and superior corrosion
resistance.

Part No I.D. O.D. Length SealOD FlangeOD Part No I.D. O.D. Length SealOD FlangeOD

Material: MANGANESE BRONZE Universal

Chevrolet LS 31-8560 0.2360 0.495 1.890
31-4041 0.3149 0.500 2.125 31-8274 0.2765 0.495 1.930
31-4019 0.315 0.500 2.000 0.500 0.562 31-4026 0.310 0.502 2.250 0.530 0.562
31-4043 0.315 0.500 2.106 31-6872 0.311 0.439 2.281
31-4042 0.315 0.500 2.126 31-7359 0.3150 0.476 1.450
31-2018 0.315 0.502 2.322 0.502 0.562 31-4017 0.340 0.502 1.950 0.531 0.531
31-4020 0.315 0.530 2.000 0.530 0.562 31-4013 0.340 0.502 2.100 0.531 0.531

Ford 4.6L 7mm Valve Stem 31-4024 0.340 0.502 2.250 0.530 0.562

31-4031 0.275 0.494 1.835 0.530 0.560 31-4015 0.340 0.503 2.125 0.530 0.562

31-4032 0.275 0.494 1.975 0.472 0.610 31-4016 0.341 0.502 1.920 0.530 0.562

31-4033 0.275 0.494 2.100 0.472 0.610 31-4011 0.341 0.502 2.125 0.530 0.562

31-4034 0.275 0.495 1.805 0.531 0.610 31-4002 0.341 0.502 2.234 0.530 0.562

Parts 31-4040 through 31-4049 are

replacement guides for 15- Aluminum
Heads from QualFast

Page 10
Part No I.D. O.D. Length SealOD FlangeOD Part No I.D. O.D. Length SealOD FlangeOD

Universal Universal
31-3500 0.341 0.502 2.400 0.530 0.562 31-8825 0.373 0.633 2.435
31-4003 0.341 0.502 2.600 0.562 0.531 31-8017 0.374 0.502 2.375
31-4047 0.342 0.480 1.921 31-6108 0.374 0.502 2.375
31-4907 0.342 0.502 2.375 0.530 0.530 31-6109 0.374 0.502 2.500
31-4022 0.342 0.502 3.000 0.530 0.531 31-8016 0.374 0.502 2.625
31-4045 0.342 0.504 2.027 0.527 0.559 31-4030 0.405 0.565 3.250 0.565
31-4046 0.342 0.504 2.086 Acura/Honda B16A-3, B17A, B18C1-5 VTEC
31-4044 0.342 0.504 2.126 31-8576 0.217 0.475 1.640
31-4040 0.342 0.504 2.133 0.535 31-8577 0.217 0.475 1.870
31-4049 0.342 0.504 2.224 0.527 0.559
Ford Focus 2.0L DOHC ZETEC
31-4048 0.342 0.504 2.283
31-8662 0.239 0.473 1.400
31-4023 0.342 0.627 2.250 0.560
Volkswagen 1.9, 2.8L 7mm
31-7715 0.343 0.502 2.125
31-8139 0.2750 0.476 1.500
31-7946 0.343 0.502 2.250
31-4021 0.343 0.502 2.350 0.530 0.530 Volkswagen 1.8 20V, 2.7, 2.8, 3.0L 30V 6mm

31-7459 0.343 0.502 2.375 31-03419 0.2360 0.436 1.415

31-7460 0.343 0.502 2.500 Material: CAST IRON

31-5604 0.343 0.502 2.625 Universal
31-6106 0.343 0.502 2.750 30-9977H 0.3120 0.502 2.281
31-8012 0.343 0.502 2.875 30-9460H 0.3430 0.502 2.500
31-6867 0.344 0.502 2.125 30-9607H 0.3440 0.502 2.250
31-5607 0.344 0.502 2.250 30-9523H 0.3440 0.502 3.063
31-7552 0.344 0.565 2.875 30-9964H 0.3730 0.502 2.625
31-8009 0.372 0.502 2.375 30-9108H 0.374 0.502 2.375
31-4025 0.372 0.502 3.000 0.530 0.531 30-9458H 0.374 0.502 3.063
31-7298 0.373 0.502 2.375 30-9972H 0.374 0.621 2.630
31-7260 0.373 0.502 2.875
31-7279 0.373 0.565 2.875
31-4028 0.373 0.620 2.562 0.530
31-4029 0.373 0.625 2.427 0.530
31-8826 0.373 0.628 2.565

Parts 31-4040 through 31-4049 are

replacement guides for 15- Aluminum
Heads from QualFast

Page 11
 QUALFAST HIGH PERFORMANCE SPRINGS

Manufactured by the industry-leading high

performance valve spring factory,
QualFast high performance springs
employ the latest materials and
manufacturing processes. All QualFast
springs are wound using super-clean
chrome silicon or new Alpha1 or 3 alloy
wires. Our springs are engineered for
high performance, giving optimum lift and
preventing valve float.

Type: SGL = Single, SWD = Single with Damper, CON = Conical, DUA = Dual, DWD = Dual with Damper
Part No Max Lift O.D. I.D. Closed Load Open Load Type Coil Bind Retainers Note

Domestic Performance

52-43270 0.490 1.215 0.861 120 @1.70 265 @1.20 SWD 1.150 55-6105 GM L6, V6

52-10008 0.490 1.240 0.876 80 @1.700 200 @1.25 SWD 1.150 55-6105

52-10010 0.500 1.260 0.876 120 @ 1.70 300 @1.20 SWD 1.160 55-6100, 55-8100

52-08470 0.500 1.437 1.080 105 @1.75 210 @1.25 SWD 1.100 55-6302

52-22970 0.525 1.525 1.075 125 @1.87 355 @1.37 SWD 1.240 55-6304

52-16670 0.540 1.435 1.035 110 @1.70 300 @1.15 SWD 1.100 55-6302

52-10012 0.540 1.494 1.080 95 @1.650 270 @1.20 SWD 1.085 55-6302

52-10011 0.540 1.504 1.090 90 @ 1.880 265 @1.38 SWD 1.265 55-6302

52-65900 0.550 1.050T 0.636 80 @1.640 185 @1.09 CON 0.952 55-6194 Ford 4.6L 2V Ovate

52-65000 0.550 1.289T 0.880 105 @1.80 260 @1.20 CON 1.140 55-6103, 55-8103 Chev. LS

52-53410 0.590 1.437 0.796 165 @1.80 315 @1.30 DUA 1.100 55-6102, 55-6307

52-57470 0.600 1.260 0.876 125 @1.75 330 @1.20 SWD 1.160 55-6100, 55-8100

52-61270 0.600 1.260 0.876 130 @1.80 350 @1.20 SWD 1.140 55-6100, 55-8100

52-55710 0.600 1.437 0.810 140 @1.80 295 @1.30 DUA 1.100 55-6302

52-61810 0.600 1.460 0.840 145 @1.80 350 @1.20 DUA 1.080 55-6302

52-27410 0.600 1.460 0.700 135 @1.85 420 @1.17 DWD 1.170 55-6302

52-27270 0.600 1.460 1.060 115 @1.82 295 @1.25 SWD 1.150 55-6302

52-41010 0.600 1.539 0.731 190 @1.94 425 @1.37 DWD 1.200 55-6305

52-49270 0.600 1.540 1.140 100 @1.90 240 @1.30 SWD 1.200 55-6308, 55-8308

52-46970 0.600 1.542 1.128 150 @1.90 332 @1.30 SWD 1.170 55-6303

52-65810 0.650 1.295 0.676 140 @1.80 385 @1.15 DUA 1.100 55-6123, 55-8123 Chev. LS

Page 12
Part No Max Lift O.D. I.D. Closed Load Open Load Type Coil Bind Retainers Note

52-58310 0.700 1.540 0.729 255 @1.95 590 @1.23 DWD 1.190 55-6303, 55-
6305, 55-6308

Diesel Performance
52-4040 0.995 0.657 84 @ 1.880 252 @ 1.40 SGL 1.290 55-6328 FOR 6.0L, 6.4L
Diesel

52-4053 1.134 0.744 105 @ 1.30 180 @ 1.00 SGL 0.880 37-3198 CUM 5.9L, 6.7L
24V

52-4041 1.180 0.868 75 @ 1.900 150 @ 1.40 SGL 1.368 55-6066 GM 6.6L Duramax

52-4049 1.344 0.945 178 @1.80 250 @1.38 SGL 1.250 37-2299 Cummins 12V

Acura/Honda B16A-3, B17A, B18C1-5 VTEC

52-8101 29mm 15.5m 80 @34mm 195 @26m DUA 19mm 55-9005

QUALFAST HIGH PERFORMANCE KEEPERS

QualFast High Performance Keepers are all

heat treated and are designed to fit with our
High Performance retainers and valves.
Sold and priced by the piece (each, 2 per
valve). 7 Degree unless noted.

Part No Stem No. Beads Type Application

34-5024 0.215 1 Round FOR, HON 5.5mm

34-719 0.234 1 Round CHC, Mit. 6mm
34-281 0.275 3 Round FDI, FOR, LAN, MAZ
34-5005 0.314 1 Round GM LS, TOY 8mm
34-7005 0.314 1 Round GM LS1 Machined
34-811M 0.314 1 Square TOY 22R Machined
34-10555-50 0.343 1 Square HP 10 Deg -50, Lower Spring Inst. Height
34-10555L 0.343 1 Square 10 Deg. For Lash Cap
34-555 0.343 1 Square Universal 11/32
34-555+50 0.343 1 Square HP +50 Taller Spring Inst. Height
34-555-30 0.343 1 Square HP -30 Lower Spring Inst. Height
34-555-60 0.343 1 Square HP -60 Lower Spring Inst. Height
34-613 0.372 1 Square Universal 3/8
34-766 0.372 4 Round CHI, CHM, CHC, IHC, IHN

Page 13
 QUALFAST HIGH PERFORMANCE SPRING KITS

QualFast Performance Spring Kits

include 16 Springs, 16 Retainers
and 32 Keepers designed to
function together to give you
maximum performance.

Part No Max Lift \ Spring O.D. \ Loads \

Kit Contents Description Specifications

52-08470SK 500 1.437 105 @1.750

16 52-08470 Single w/ Damper 210 @1.250
16 55-6302 7 Deg Retainer 11/32 x 1.400
32 34-555 7 Deg Keeper 11/32
52-10010SK 500 1.260 120 @1.700
16 52-10010 Single w/ Damper 320 @1.200
16 55-6105 7 Deg Retainer 11/32 x 1.200
32 34-555 7 Deg Keeper 11/32
52-22970SK 525 1.525 125 @1.875
16 52-22970 Single w/ Damper 355 @1.375
16 55-6304 7 Deg Retainer 3/8 x 1.400
32 34-613 7 Deg Keeper 3/8
52-65000SK 550 1.289 105 @1.800
16 52-65000 Single Conical 265 @1.200
16 55-6103 7 Deg Retainer 8mm x 1.030
32 34-5005 7 Deg Keeper 8mm
52-65008SK 550 1.289 105 @1.800
16 52-65000 Single Conical 265 @1.200
16 55-8103 7 Deg Retainer 8mm x 1.030 Titanium
32 34-5005 7 Deg Keeper 8mm
52-65900SK 550 1.050 80 @1.640
16 52-65900 Single Conical 185 @1.090
16 55-6194 7 Deg Retainer 7mm x 0.890
32 34-281 7 Deg Keeper 7mm
52-53410SK 590 1.437 [email protected]
16 52-53410 Dual 315 @1.30
16 55-6102 7 Deg Retainer 11/32 x 1.370
32 34-555 7 Deg Keeper 11/32

Page 14
Part No Max Lift \ Spring O.D. \ Loads \
Kit Contents Description Specifications

52-27270SK 600 1.460 115 @1.820

16 52-27270 Single w/ Damper 245 @1.320
16 55-6302 7 Deg Retainer 11/32 x 1.400
32 34-555 7 Deg Keeper 11/32
52-27410SK 600 1.460 135 @1.850
16 52-27410 Dual w/ Damper 420 @1.175
16 55-6302 7 Deg Retainer 11/32 x 1.400
32 34-555 7 Deg Keeper 11/32
52-41010SK 600 1.539 190 @1.940
16 52-41010 Dual w/ Damper 425 @1.370
16 55-6305 7 Deg Retainer 3/8 x 1.490
32 34-613 7 Deg Keeper 3/8
52-46970SK 600 1.542 150 @1.900
16 52-46970 Single w/ Damper 332 @1.300
16 55-6303 7 Deg Retainer 11/32 x 1.49
32 34-555 7 Deg Keeper 11/32
52-49270SK 600 1.540 100 @1.900
16 52-49270 Single w/ Damper 240 @1.300
16 55-6308 10 Deg Retainer 11/32 x 1.400
32 34-10555L 10 Deg Keeper 11/32
52-55710SK 600 1.437 140 @1.800
16 52-55710 Dual 295 @1.300
16 55-6302 7 Deg Retainer 11/32 x 1.400
32 34-555 7 Deg Keeper 11/32
52-57470SK 600 1.260 125 @1.750
16 52-57470 Single w/ Damper 330 @1.200
16 55-6100 7 Deg Retainer 11/32 x 1.240
32 34-555 7 Deg Keeper 11/32
52-61270SK 600 1.260 130 @1.800
16 52-61270 Single w/ Damper 350 @1.200
16 55-6100 7 Deg Retainer 11/32 x 1.240
32 34-555 7 Deg Keeper 11/32
52-61810SK 600 1.460 145 @1.800
16 52-61810 Dual 350 @1.200
16 55-6302 7 Deg Retainer 11/32 x 1.400
32 34-555 7 Deg Keeper 11/32
52-58310SK 700 1.540 255 @1.950
16 52-58310 Dual w/ Damper 590 @1.230
16 55-6308 10 Deg Retainer 11/32 x 1.490
32 34-10555L 10 Deg Keeper 11/32
52-58318SK 700 1.540 225 @1.950
16 52-58310 Dual w/ Damper 590 @1.230
16 55-8308 10 Deg Retainer 11/32 x 1.490 Titanium
32 34-10555L 10 Deg Keeper 11/32

Page 15
 QUALFAST HIGH PERFORMANCE RETAINERS

Precision Machined From Chrome Moly or

Titanium, our High Performance Retainers are
specially designed to work with our High
Performance Springs.

Part No Stem Dia O.D. Step 1 Dia. Step 2 Dia. Deg. Matl. Note
Domestic Performance
55-6104 11/32 1.030 0.640 7 Chrome Moly Use w/ Conical Spring
55-6906 11/32 1.130 0.865 0.615 7 ChromeMoly GM Vortec 86-Up
55-6115 11/32 1.200 0.748 0.635 7 ChromeMoly GM 265-350

55-6105 11/32 1.200 0.850 0.667 7 ChromeMoly GM 265-350

55-6100 11/32 1.240 0.860 0.645 7 ChromeMoly Std. SBC
55-8100 11/32 1.240 0.860 0.600 7 Titanium Std. SBC

55-6231 11/32 1.250 0.845 0.690 7 ChromeMoly Buick 231

55-6177 11/32 1.320 0.918 0.660 7 ChromeMoly Ford 2.3L
55-6179 11/32 1.330 0.987 0.660 7 ChromeMoly Ford L6 300

55-6102 11/32 1.370 1.064 0.720 7 ChromeMoly Ford 260-302

55-6302 11/32 1.400 1.060 0.700 7 ChromeMoly
55-6307 11/32 1.400 1.060 0.695 10 Chrome Moly
55-6303 11/32 1.490 1.124 0.695 7 ChromeMoly
55-8308 11/32 1.490 1.120 0.695 10 Titanium
55-6308 11/32 1.490 1.120 0.695 10 ChromeMoly
55-8310 11/32 1.59 1.174 0.866 10 Titanium
55-6455 3/8 1.310 0.820 7 ChromeMoly Buick 455
55-6318 3/8 1.340 0.995 0.637 7 ChromeMoly Chry. 318

55-6304 3/8 1.400 1.060 0.695 7 ChromeMoly

55-6201 3/8 1.400 1.060 0.885 7 ChromeMoly GM 396-454
55-6305 3/8 1.490 1.120 0.695 7 ChromeMoly
55-6360 5/16 1.144 0.820 0.660 7 ChromeMoly Chry. 360
55-6312 5/16 1.400 1.075 0.725 7 ChromeMoly
55-6194 7mm 0.890 0.620 0.550 7 ChromeMoly Ford 4.6L Late

55-6197 7mm 0.980 0.595 0.532 7 ChromeMoly GM 2.2L 87-98 CHC 3.7L, 4.7L

55-6294 7mm 1.040 0.742 0.595 7 ChromeMoly Ford 4.6L Early

55-8103 8mm 1.030 0.640 7 Titanium GM LS1

55-6103 8mm 1.030 0.640 7 ChromeMoly GM LS1

55-6198 8mm 1.038 0.618 7 ChromeMoly GM 3.1L 94-98

55-6123 8mm 1.230 0.860 0.600 7 ChromeMoly LS1

55-8123 8mm 1.230 0.860 0.600 7 Titanium GM LS1

55-6130 8mm 1.300 1.070 0.700 7 ChromeMoly GM LS1

55-8130 8mm 1.300 1.070 0.700 7 Titanium GM LS1
55-8143 8mm 1.430 1.060 0.690 7 Titanium GM LS1
Diesel Performance
55-6328 0.274 0.912 0.621 7 Chrome Moly FOR 6.0, 6.4L
55-6066 0.275 1.175 0.819 0.597 7 Chrome Moly GM 6.6 Duramax
Import Performance
55-9005 5.5mm 28mm 21.7mm 15.4mm 7 Titanium Acura/Honda B16A-3, B17A, B18C1-5 VTEC
55-6922 8mm 1.295 0.904 0.600 7 ChromeMoly Toyota 22R

Page 16
 QUALFAST HIGH PERFORMACE SPRING INSERTS, CUPS,
AND LOCATORS
QualFast HP Spring I.D. Locators, part numbers 33-****-L, are manufactured from chrome moly with black oxide
finish. The inside edge on these inserts keeps the spring centered. Outside Cups, also in chrome moly with
black oxide, 33-5***, control spring walk with an outside lip. Flat HP Valve Spring Inserts have heat-retarding
serrations with a blue tint indicating heat treatment.

Part No Thickness O.D I.D. Spring I.D. / O.D Part No Thickness O.D I.D. Spring I.D. / O.D

I.D. Locator Valve Spring

Insert

33-8135-L 30 1.135 0.435 0.600 33-1086-5 60 0.970 0.445

33-8251-L 60 1.235 0.505 0.655 33-1063-5 30 1.100 0.719
33-8250-L 30 1.250 0.569 0.655 33-1066-5 60 1.100 0.719
33-8490-L 60 1.490 0.569 0.720 33-8806-5 60 1.170 0.600
33-8535-L 60 1.535 0.569 0.740 33-1071-5 15 1.250 0.625
33-8550-L 60 1.550 0.569 0.715 33-1073-5 30 1.250 0.625
33-8570-L 60 1.570 0.569 0.810 33-2033-5 30 1.250 0.812
33-8620-L 60 1.620 0.569 0.740 33-2036-5 60 1.250 0.812
33-8016-5 60 1.250 0.812
Outside Cup 33-2013-5 30 1.250 0.875
33-2016-5 60 1.250 0.875
33-1026-5 60 1.360 1.000
33-3013-5 30 1.375 0.765
33-3016-5 60 1.375 0.765
33-3063-5 30 1.437 0.645
33-3066-5 60 1.437 0.645
33-5103 183 1.200 0.664 1.130 33-3053-5 30 1.437 0.785
33-5270 65 1.360 0.570 1.260 33-3056-5 60 1.437 0.785
33-5056 60 1.399 0.821 1.300 33-3033-5 30 1.480 0.703
33-5440 60 1.550 0.690 1.440 33-3036-5 60 1.480 0.703
33-5475 80 1.580 0.640 1.470 33-6031-5 15 1.500 0.562
33-5076-5 60 1.595 0.645 1.475 33-6033-5 30 1.500 0.562
33-5126-5 60 1.614 0.570 1.470 33-1033-5 30 1.500 1.031
33-5510 80 1.630 0.640 1.500 33-1036-5 60 1.500 1.031
33-5036-5 60 1.640 1.029 1.520 33-6013-5 30 1.640 0.635
33-5066-5 60 1.650 0.645 1.520 33-6016-5 60 1.640 0.635
33-5565 80 1.680 0.640 1.560
33-5146 60 1.700 0.570 1.550
33-5650 80 1.745 0.640 1.650

Page 17
 QUALFAST ROCKER ARMS
QualFast Rocker Arms listed here are stock tip with superior heat treatment. Self-Aligning styles
add guide rails. All but 40-2886 (early ford) are stamped steel for high performance. LS 40-2902
and 40-2903 have caged bearings and improved, smoother trunions.

40-2736 40-2901 40-2902 40-2903

Part No Ratio Slot Description Application

40-2737 1.5 Long Rocker Arm, Self-Aligning Stamped 3/8" Stud Small Block Chevrolet

40-2840 1.5 Long Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet

40-2736 1.5 Stock Rocker Arm, Self-Aligning Stamped 3/8" Small Block Chevrolet

40-2842 1.5 Stock Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet

40-2738 1.6 Long Rocker Arm, Self-Aligning Stamped 3/8" Stud Small Block Chevrolet

40-2841 1.6 Long Rocker Arm, Stamped 3/8" Stud Small Block Chevrolet

40-2901 Rocker Arm, w/ Pivot, Bolt LS, 3.5, 3.9L OE Chevrolet LS

40-2902 Rocker Arm, LS1 Straight HP Caged Bearings Chevrolet LS

40-2903 Rocker Arm, LS3 Offset HP Caged Bearings Chevrolet LS

40-2868 1.72 Long Rocker Arm, Stamped For >0.560 Lift Big Block Chevrolet

40-2867 1.72 Stock Rocker Arm, Stamped Big Block Chevrolet

40-2886 Stock Rocker Arm, Cast w/ Rails 289, 302, 351 Small Block Ford

40-2889 Stock Rocker Arm, Stamped 302 '78-98, 351 Small Block Ford

40-2888 Stock Rocker Arm, Stamped Ford Big Block

QUALFAST HP ROLLER ROCKER SETS

QualFast Roller Rockers have roller
tips and are manufactured from
Stainless Steel, which provides
durability compared to aluminum,
allowing less fatigue under higher
loads. Sold in sets, each set contains
16 roller rockers, and 16 Poly Locks
with black anodized finish.

Part No Ratio Stud Description

45-11501 1.50 3/8" Small Block Chevrolet

45-11702 1.70 7/16" Big Block Chevrolet

45-21601 1.60 3/8" Small Block Ford

Page 18
 QUALFAST ROCKER KITS

QualFast Kits are sold per rocker

arm, and require 16 per engine for
16V engines

QC # Application Description
41-2902TK LS Set of 16 Caged Bearing Trunnions, 16 Bronze Bushings, 16 C Clips

41-2509 GM SBC 1 40-1842, 1 42-1786 3/8 Nut, 1 42-1792 Grooved Ball

41-1736 GM SBC 1 40-2736, 1 42-1731 Smooth Ball, 1 42-1786 3/8 Nut.

41-1737 GM SBC 1 40-2737, 1 42-1731 Smooth Ball, 42-1786 3/8 Nut

41-2738 GM SBC 1 40-2738, 1 42-1786 3/8 Nut, 1 42-1792 Grooved Ball

41-2508 GM SBC 1 40-2840, 1 42-1786 3/8 Nut, 1 42-1792 Grooved Ball

41-2401 GM SBC 1 40-2842, 1 42-1731 Smooth Ball, 1 42-1786 3/8 Nut

41-2501 GM SBC 1 40-2842, 1 42-1786 3/8 Nut, 1 42-1792 Grooved Ball

41-2504 GM BBC 1 40-2867, 1 42-1793 7/16 Nut, 1 42-1797 Grooved Ball

41-2507 GM BBC 1 40-2868, 1 42-1793 7/16 Nut, 1 42-1797 Grooved Ball

41-2610 FOR 1 40-2886, 1 42-1772 Grooved Ball, 1 42-1786 3/8 Nut, 1 42-1791 5/16 Nut

41-2547 FOR 1 40-2888, 1 42-1740 5/16 Bolt, 1 42-1776 Pivot

41-2548 FOR 1 40-2889, 1 42-1741 Bolt, 1 42-1776 Pivot

QUALFAST ROCKER STUDS

QualFast Rocker Studs

are made of steel with Custom Rocker
black oxide finish for Stud etching
increased hardness. available with
Threads are cold rolled. upgrade fee.

Part No Stud Thread A Effect Stud Length B Base Thread C Overall Length D
42-2940 7/16-20 1.910 7/16-14 Hex 2.670
42-2941 7/16-20 1.765 7/16-14 Hex 2.560
42-3651 3/8-20 1.770 7/16-14 Hex 2.490
42-4403 3/8-24 1.480 7/16-14 Hex 2.240
42-4920 3/8-24 1.725 7/16-14 Hex 2.410
42-2913 3/8-24 1.790 7/16-14 Hex 2.500
42-3920 3/8-24 1.600 7/16-14 No Hex 2.325
42-2600 3/8-24 1.910 7/16-14 Hex 2.610

Page 19
 QUALFAST PUSH RODS
QualFast Push Rods are heat treated chrome moly with
additional black oxide finish suitable for use with guide plates.

Type: P = Pressed S = Swedged W = Welded

QC # Length O.D. Type Tip 1 Tip2 Application

74-6342 6.162 5/16X .060 W O O GM 173, 189, 207

74-6281 6.876 5/16X .060 W O O FOR 302
74-6373 7.195 5/16X .060 W O O GM SB
74-6614 7.397 5/16X .075 W O O LS
74-6034 7.793 5/16X .060 W O O GM SB, AMC
74-6230 8.279 5/16X .075 W O O GM BB Int
74-6380 9.200 5/16X .075 W O O GM BB Exh
74-6231 9.252 5/16X .075 W O O GM BB Exh
74-6310 9.499 5/16X .060 W O O FOR 351M, 400
74-6306 10.136 5/16X .060 W O O FOR 240, 300
74-6441 8.281 3/8X .060 S O O GM BB Int
74-6442 9.254 3/8X .060 S O O GM BB Exh
74-9000 Measuring Tool 6.125 - 7
74-9003 Measuring Tool 9.60 - 11
74-9001 Measuring Tool 7.50 - 8.
74-9002 Measuring Tool 8.50 - 9.

QUALFAST HIGH PERFORMANCE LIFTERS

CCI indicates Chilled Cast

Iron for superior wear 36-2148G
resistance

QC # Type Length O.D. Application

36-817CCI Hydraulic 2.000 0.8425 GM Flat Chilled Cast Iron

36-900CCI Hydraulic 2.000 0.8743 FOR Flat Chilled Cast Iron

36-992 Mechanical 2.000 0.8425 GM Early

36-2011CCI Hydraulic 1.900 0.9040 CHC Chilled Cast Iron

36-2148 Hydraulic 2.600 0.8425 GM Vortec Roller

36-2148G Guide GM Vortec Dogbone Guide

36-2279 Hyraulic 2.603 0.8421 GM BBC Roller

36-2279G Guide GM BB Dogbone Guide

Page 20
 QUALFAST GUIDE PLATES
QualFast Guide Plates are formed from steel, heat treated and coated with
black oxide to ensure hardness and durability.

Part No Dia. Type Application Photo

75-100 5/16 Flat SBC

75-100A 5/16" Adjustable SBC

75-101 3/8" Flat SBC

75-102 3/8 Stepped SBC

75-107 3/8 Stepped BBC

75-110 5/16 Flat SBF

75-111 5/16 Stepped FOR 351C

75-112 3/8 Stepped BBF

75-115 3/8 Stepped BBC

75-210 5/16 Flat SBF

75-700 3/8 Stepped GM BBC

Page 21