Search
Membership Services
Fluid Pressure Drop Along Pipe Length of Uniform Diameter
Fluid Flow Table of Contents Home
Engineering Book Store
Hydraulic and Pneumatic Knowledge Engineering Forum
Applications and Design
Pressure drop in pipes is caused by: Beam Deflections and Stress
Bearing Apps, Specs & Data
Friction Belt Design Data Calcs
Civil Engineering
Vertical pipe difference or elevation Design & Manufacturability
Changes of kinetic energy Electric Motor Alternators
Calculation of pressure drop caused by friction in circular pipes Engineering Calculators
Excel App. Downloads
Flat Plate Stress Calcs
To determine the fluid (liquid or gas) pressure drop along a pipe or pipe Fluids Flow Engineering
component, the following calculations, in the following order. Friction Engineering
Gears Design Engineering
General Design Engineering
Equation Reynolds Number: Hardware, Imperial, Inch
Hardware, Metric, ISO
Heat Transfer
Hydraulics Pneumatics
Re = ω D / v Where: HVAC Systems Calcs
Economics Engineering
Re = ρ v l / µ Re = Reynolds Number (unitless) Electronics Instrumentation
ω = Velocity of fluid flow (m/sec) Engineering Mathematics
Re = ω l / v Engineering Standards
D = Diameter of Pipe (m) Finishing and Plating
v = Kinematic Viscosity (m2/s) Friction Formulas Apps
Lubrication Data Apps
ρ = Density of fluid (kg/m3) Machine Design Apps
l = Characteristic length, thoe chord of an airfoil Manufacturing Processes
Materials and Specifications
Mechanical Tolerances Specs
Kinematic Viscosity Plastics Synthetics
Power Transmission Tech.
Example kinematic viscosity values for air and water at 1 atm Pressure Vessel
and various temperatures. Pumps Applications
Re-Bar Shapes Apps
Section Properties Apps
Air Kinematic Viscosity m2/a Strength of Materials
Spring Design Apps
1.2462E-5 -10 14 Structural Shapes
Threads & Torque Calcs
1.3324E-5 0 32 Thermodynamics
Physics
1.4207E-5 10 50 Vibration Engineering
1.5111E-5 20 68 Videos Design Manufacture
Volume of Solids Calculators
Welding Stress Calculations
Water Kinematic Viscosity m2/ a Training Online Engineering
Print Webpage
1.6438E-6 1 33.8
1.267E-6 10 50 Scientific Calculator Popup
9.7937E-7 20 6
Kinematic Viscosity Table Chart of Liquids
Unit Converter
Conversion Property
If the Reynolds number < 2320, than you have laminar flow. Acceleration ▼
Laminar flow is characterized by the gliding of concentric cylindrical layers past
one another in orderly fashion. The velocity of the fluid is at its maximum at the 0
Meter/sq.sec (m/sec^2)
pipe axis and decreases sharply to zero at the wall. The pressure drop caused by
▼
friction of laminar flow does not depend of the roughness of pipe.
Convert To ↓
0
Meter/sq.sec (m/sec^2) ▼
Copyright Notice
If the Reynolds number > 2320, you have turbulent flow.
There is an irregular motion of fluid particles in directions transverse to the
direction of the main flow. The velocity distribution of turbulent flow is more
uniform across the pipe diameter than in laminar flow. The pressure drop caused
by friction of turbulent flow depends on the roughness of pipe.
Select pipe friction Coefficient:
The pipe friction coefficient is a dimensionless number. The friction factor for
laminar flow condition is a function of Reynolds number only, for turbulent flow it
is also a function of the characteristics of the pipe wall.
Determine Pipe friction coefficient at laminar flow:
λ = 64 / Re
Where:
λ = Pipe Friction Coefficient
Re = Reynolds number
Note: Perfectly smooth pipes will have a roughness of zero.
Determine Pipe friction coefficient at turbulent flow (in the most cases)
Colbrook Equation:
or
Where:
= Pipe Friction Coefficient
g = Acceleration of Gravity (9.8 m/s/s)
Re = Reynolds Number (unitless)
k = Absolute Roughness (mm)
D = Diameter of Pipe (m)
lg = Short for Log
The solutions to this calculation is plotted vs. the Reynolds number to create a
Moody Chart.
Following table gives typical roughness values in millimeters for commonly used
piping materials.
Surface Material Absolute Roughness Coefficient - k (mm)
Aluminum, Lead 0.001 - 0.002
Drawn Brass, Drawn Copper 0.0015
Aluminum, Lead 0.001 - 0.002
PVC, Plastic Pipes 0.0015
Fiberglass 0.005
Stainless steel 0.015
Steel commercial pipe 0.045 - 0.09
Stretched steel 0.015
Weld steel 0.045
Galvanized steel 0.15
Rusted steel 0.15 - 4
Riveted steel 0.9 - 9
New cast iron 0.25 - 0.8
Worn cast iron 0.8 - 1.5
Corroding cast iron 1.5 - 2.5
Asphalted cast iron 0.012
Galvanized iron 0.015
Smoothed cement 0.3
Ordinary concrete 0.3 - 3
Well planed wood 0.18 - 0.9
Ordinary wood 5
Determine Pressure drop in circular pipes:
Where:
Δp = Pressure Drop (Pa or kg / m-s 2)
λ = Pipe Friction Coefficient
L = Length of Pipe (m)
D = Pipe Diameter (m)
p = Density (kg/m3)
ω = Flow Velocity (m/s)
If you have valves, elbows and other elements along your pipe then you calculate
the pressure drop with resistance coefficients specifically for the element. The
resistance coefficients are in most cases found through practical tests and through
vendor specification documents. If the resistance coefficient is known, than we can
calculate the pressure drop for the element.
Where:
= Pressure Drop (kg/m2)
= Resistance Coefficient (determined by test or vendor specification)
p = Density (kg/m3)
ω = Flow Velocity
Pressure drop by gravity or vertical elevation
Where:
Δp = Pressure Drop (kg/m2)
p = Density (kg/m3)
g = Acceleration of Gravity (9.8 m/s/s)
ΔH = Vertical Elevation or Drop (m)
Pressure drop of gasses and vapor
Compressible fluids expands caused by pressure drops (friction) and the velocity
will increase. Therefore is the pressure drop along the pipe not constant.
Where:
p1 = Pressure incoming (kg/m2)
T1 = Temperature incoming (°C)
p2 = Pressure leaving (kg/m2)
T2 = Temperature leaving (°C)
We set the pipe friction number as a constant and calculate it with the input-data.
The temperature, which is used in the equation, is the average of entrance and
exit of pipe.
Note: You can calculate gases as liquids, if the relative change of density is
low (change of density/density = 0.02).
Link to this Webpage:
Engineers Edge:
https://www.engineersedge.com/fluid_flow/pressure_drop/pressure_drop.htm
Copy Text to clipboard
Click for Suggested Citation
© Copyright 2000 - 2023, by Engineers Edge, LLC
www.engineersedge.com
All rights reserved
Disclaimer | Feedback
Advertising | Contact
