Before using your washing machine, please read this

manual carefully and keep it for future reference.

Twin Tub Washing Machine

OWNER’S MANUAL

MODEL:MSW-1308P

Read This Manual

Inside you will find many helpful hints on how to
use and maintain your washing machine properly.
Just a little preventative care on your part can
save you a great deal of time and money over the
life of your washing machine . You'll find many
answers to common problems in the chart of
troubleshooting tips. If you review the chart of
troubleshooting tips first, you may not need to call
for service.
TABLE OF CONTENTS SAFETY PRECAUTION

Safety Precaution
Safety Precaution 1 Be sure to comply with the following to prevent damage to body and property of you and others:
Attention To Installation 2 The sign stands for “pay attention” , and the picture of specific items needs attention shows in .
Lay upper drain hose 2 The sign stands for “forbid”, and the picture of specific items forbidden shows in .

Change the position of the drain hose 2 The sign stands for “must do”, and the picture of specific items must be done shows in .
Installation site 2
Preparation Instructions 3 Do not dismantle the machine Do not install the machine in Do not place inflammable Do not spray water directly to
by yourself. damp or rainy environment to materials like burning candle, the machine.
Reference of laundry quantity avoid electric shock, fire, mosquito incense, cigaret etc.
machine failure,or deformation. or heating source like electric
stove, calorifier etc. on the
corresponding to different capacities 3 machine.

Laundry volume and detergent

dosage reference 3 Forbid dismantling Avoid dampness Forbid Avoid spraying water

Name Of Parts 4
Accessories 4 Do not let baby sit on it or place
heavy things on it.
Do not wash clothes that are
stained with kerosene, petrol,
Make sure that the water inlet
hose is connected and the tap
Do not exceed the max. water
level to avoid water overflowing
alcohol, and other flammable is opened before washing. and machine failure.
Introduction Of Control Panel 4 substance.

Quick Start 5
Washing Method 5
Forbid
Rinsing Method 5 Forbid
+

Forbid
+

Spinning Method 6
To avoid electric shock Do not let baby climb to the If use warm water, the water Do not wash down-filled coat,
Efficiency Program 7 resulting from electric leakage, machine or play near running temperature should not raincoat or similar clothes.
please connect grounding wire tub to avoid accident. exceed 50℃.
Special Features 7 of the plug properly.

Soak function 7
Buzzer function 7 Forbid
waterproof

Grounding Forbid
Forbid
The dual voltage 7
Attention To Maintenance 8
Wipe off dirty and dust on the Do not put hands into the tub Do not replace power cord by Do not damage the power cord
plug often to prevent poor
Cabinet maintenance 8 contact with power supply.
before it stopping running. yourself. and plug to avoid electric
shock , short circuit or fire.

Cleaning the lint filter 8

Anti-freezing protection 8
Operation when objects are Forbid
Forbid putting into Forbid

dropped into outside of the spin tub 8

Notes 8 Insert the plug tightly when Do not pull the cord when Do not insert or unplug the plug Unplug the plug from socket
use. unplug the plug. with wet hands to avoid electric after use.
Main Technical Parameters 9 shock.

Forbid wet hands Unplug the plug

-1-
Installation Usage method
Attention To Installation Preparation Instructions
● Plug in power and connect the water inlet hose.
Lay upper drain hose ● Lay down the lower drain hose and connect it to the sewer , or lay the upper drain hose to places as
indicated in page 2.
●Needs a drain hose with minimum diameter of 3 cm, and minimum carry away capacity of ● Check that there are no objects such as coins, hairpins, mud or sand in the pocket.
40 liters per minute. ● Strings should be knotted in advance to prevent entanglement.
●For upper drain system, the drain hose must be placed at least 86 cm(30 inches) from the ● Clothes can be classified for washing according to the texture, dirty degree and color.
bottom of washer , but not higher than 100 cm. ● For small pieces (e.g.,stockings) or fluffy clothes, put them into a nylon net for washing.

Attachment: Reference of laundry quantity corresponding to different capacities

86cm<H<100cm

Laundry Shirt Uniform Jeans Jacket

Capacity about 500 g about 650 g about 900 g about 1600 g
FOR UPPER DRAIN SYSTEM ONLY

2.0kg Capacity about 4 pcs. about 3 pcs. about 2 pcs. about 1 pcs.
Change the position of the drain hose
3.0kg Capacity about 6 pcs. about 4 pcs. about 3 pcs. about 1 pcs.
The ex-factory installation position of the drain Front 3.6kg Capacity about 7 pcs. about 5 pcs. about 4 pcs. about 2 pcs.
hose is located at the spin side . According to the
4.6kg Capacity about 9 pcs. about 6 pcs. about 5 pcs. about 2 pcs.
installation site, the drain hose can also be installed
5.0kg Capacity about 10 pcs. about 7 pcs. about 5 pcs. about 3 pcs.
at the wash side of the machine . The method is
as follows: 5.5kg Capacity about 11 pcs. about 8 pcs. about 6 pcs. about 3 pcs.
① Unplug the power cord and empty water in the drain 6.0kg Capacity about 12 pcs. about 9 pcs. about 6 pcs. about 3 pcs.
hose completely. 7.0kg Capacity about 14 pcs. about 10 pcs. about 7 pcs. about 4 pcs.
② Spread a piece of soft cloth on the floor (e.g. a blanket) 7.5kg Capacity about 15 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
and place the washing machine on it gently. Drain hose 8.0kg Capacity about 16 pcs. about 11 pcs. about 8 pcs. about 4 pcs.
③ Take the drain hose out from the buckle at the Buckle Blanket
spin side, and put it into the buckle at the wash side. 8.5kg Capacity about 17 pcs. about 12 pcs. about 9 pcs. about 5 pcs.
④ Hang up the drain hose kit. 10.0kg Capacity about 20 pcs. about 15 pcs. about 10 pcs. about 6 pcs.
FOR LOWER DRAIN SYSTEM ONLY
12.0kg Capacity about 24 pcs. about 18 pcs. about 13 pcs. about 7 pcs.
...... ...... ...... ...... ......

●The figure above is for reference only, specific weights are subject to actual clothes.

Installation site Attachment :Laundry volume and detergent dosage reference

In order to avoid electrical failure, discoloration and deformation, do not install the machine Laundry Water Wash time Detergent
Fabric type Water flow
in the following places: capacity(kg) level (minutes) amount(g)
● Locations exposed ● Locations exposed to rain ● Locations with uneven 0-4.5 Low 3 About 42
Synthetics,silk,
or snow or unstable ground Gentle
to direct sunlight Delicate fabrics 4.5-8.0 Mid 3-5 About 65
0-8.0 Mid 7 About 65
Cotton or linen Normal
8.0-13.0 High 7-10 About 87
0-8.0 Mid 10 About 65
Heavy soils Normal
8.0-13.0 High 10-35(soak 20) About 87

●The dosage of washing detergent varies according to dirty degree and texture of laundries.

-2- -3-
Structure Instruction Usage method

Name Of Parts Quick Start

Drain hose
(For upper drain only)
Control panel
9. Take out the laundry from
1. Install the washing machine
the spin tub

Wash cover Spin cover

Lint filter Safety cover

8. Turn the spin timer knob

2. Load the laundry
to set spin time
Wash tub Frame

Pulsator
Cabinet

3. Add detergent and water 7. Move the laundry into the spin
into the wash tub tub and close the spin cover
Power plug
Base
Drain hose
(For lower drain only)
Accessories
4. Turn the wash timer knob 6. Repeat the steps 3-5 for rinsing
to set wash time

Inner spin cover Water inlet hose

5. Set the wash drain selector to

“Drain” position after washing
Introduction Of Control Panel
Water inlet Wash timer Wash-Drain selector Spin timer Washing Method
1. Insert the water inlet hose into the water inlet mouth , and choose injecting
Normal
Wash timer
water to the wash tub .
Wash timer

Heavy Drain
2. Put the laundry into the wash tub, and add detergent into it.
When fill water to half of the desired water level, turn off the
Wash-Drain Selector Spin Timer
water tap and let laundries soak in the solution for minutes,
then fill water to desired water level.
Spin timer 3. Set wash program “Normal” or “Heavy” as per amount and texture of laundries.
Water inlet Wash timer Wash-Drain selector Water level indicator
4. Turn the wash timer knob to set wash time.
Normal 5. After washing, set the wash drain selector to “Drain” position for draining.
Wash timer
5
35
10
Heavy Drain

Soak 15
Rinsing Method
Wash-Drain Selector Spin Timer

A. Spraying rinse (rinse in the spin tub)

※T he drawing above is for reference only, specific drawing is subject to actual models. ①Put the laundry into the spin tub after washing.
②Turn on the water tap, choose to fill water into the spin tub for 3-4 minutes, and then turn off the water tap.
● Water inlet:be used to inject water to wash tub or spin tub. ③Set the spin timer for 2-5 minutes for rinsing.
● Wash timer:be used to select required washing time. ④The above steps can be repeated.
● Spin timer:be used to select required spinning time. Note: ①If there is red rust in water, do not choose spraying rinse, for the rust is easy to adhere to
● Wash-Drain selector: For washing or rinsing, select “ Normal”or“ Heavy”. laundries.
For Draining ,select “Drain”. ②Ensure that do not fill water into spin tub when spinning.

-4- -5-
Usage method Usage method
B. Common rinse (rinse in the wash tub)
Efficiency Program (For efficiency program only )
①To save time, water and energy, can do pre-spinning before rinsing. “Heavy”wash, 15minutes with 40℃ warm water, spin twice,3minutes each ; Rinse once for 5minutes with 20℃
②Put laundries which have already been dehydrated into the wash tub.
Spin timer
cold water, spin twice,3minutes each ; Rinse once for 5minutes with 20℃ cold water, spin twice,4minutes each
③After filling water to the desired level, turn off the water tap to save water. Water level “H”used for all wash and rinse.
④Turn the “Wash selector” knob to the "Normal” or “Heavy”.
⑤Set the “wash timer”to the desired time (about 3-5 minutes)for rinsing. Special Features
⑥After rinsing, put the washing materials into the spin tub to spin for 1 to 5 minutes.
A.Soak function (For machines having soak function only )
⑦Drain out the rinsing water in the wash tub. Wash timer

⑧The above steps can be repeated. For seriously stained clothes, Soak wash is useful to achieve better wash result. 35
5

15-35 minutes of the wash timer is for soak wash:(illustrate as follows) 10

Spinning Method 35 15
Soak 15

Total: 35 (mins) about 5 about 5 about 5

about 2 about 1.5 about 1.5 (unit：mins )
1.Shake out the laundry and put 2.Put the inner spin cover on the laundry.
Work time
them into the spin tub. Confirm the inner spin cover is placed
Static time
horizontally.
This machine can wash blended blanket (less than 3 kg) marked with the "hand washing"
label.Washing method is as follows:
Inner ①Dilute detergent with adequate water (below 50℃), then pour the solution into the wash tub.
②Fold the blanket as shown in the figure, and put it into the wash tub.
spin cover

Spin tub

Correct Incorrect ● Fold in half along ● 1/3 fold in the ● Roll up the blanket ● Put into the tub with
the long edge same direction blanket edge facing down

B.Buzzer function (For machines having buzzer function only)

3.Close the safety cover and the 4.Refer to the following table to select
Function of the buzzer is to alarm finish of washing,and it is helpful to control wash process.
spin cover. spinning time.
● Buzzer will alarm the completion of washing.
C.The dual voltage (For machines having the dual voltage function only)
Spin cover Washing materials Spin time
The dual voltage washing machine can work at the voltage of 220V or 127V to meet needs of different
Silk About 50 countries and areas.
seconds ● convert the voltage from 220V60Hz to 127V60Hz :
Light clothes About 1 ①Unplug the washing machine plug to cut off the power supply.
(fiber/blended) minute
②Remove the back cover.
Knitwear (fiber) About 1～2 Spin timer
③Take down the nylon clip, and remove the plastic bag.
Safety cover minutes
Underwear About 2～3 ④Connect the “ Wash127V ” of the terminal connector with “Wash”, “Spin127V” with “Spin” , then the voltage
(cotton) minutes can be converted to “127V60Hz”.
Slipover About 3～4 ⑤Put the wires in order, wrap them in the plastic bag, and refix the back cover. Then the washing machine
(cotton/linen) minutes can be powered for operation.
Toweling coverlet About 5 ● If convert the voltage from 127V60Hz to 220V60Hz:
(cotton) minutes ①②③Steps ①-③ are the same as above
④Connect the “Wash 220V” of the terminal connector with “Wash”, “Spin 220V” with “Spin” to convert the
The appliance can not be used by children or persons with reduced physical, sensory or mental voltage to 220V60Hz .
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. ⑤The step ⑤ is the same as above
The new hose supplied with the appliance are to be used and that old hose should not be used. In the step ④ above, should connect the terminal connectors of both wash and spin, and make sure to
When choosing the water inflowing to wash tub or spin tub , please do not move the water inlet valve connect correctly.
*The factory-set voltage is “ 220V60Hz ” . Users can chose the voltage according to the regional voltage range.
during the process of water inflowing.
If strong vibration occurs in time of spinning, open the spin cover immediately. Make sure that the washing
machine is placed on a flat and stable floor ,and then adjust washing materials, distribute them evenly.
To do spinning and draining together, please spin for 1 minute before draining.
Do not wash or spin waterproof clothes or clothes that float easily to avoid abnormal vibration or damage
to the clothes.

-6- -7-
Maintenance Maintenance
Attention To Maintenance ●Do not connect to the hot water supply.
●After using, be sure to unplug the power plug.
Cabinet maintenance Cleaning the lint filter ●Be sure to use plug that is properly grounded.
●The maximum gradient of the supporting surface for the washing machine should not exceed 2º.
After using the washing machine,wipe ◆Press the button head, and ●Do not tear down electrical wires and components in the machine by yourself.
the moisture and stain on it with a piece pull the lint filter out. ●There are holes on the base for ventilation. These holes should not be blocked by foreign objects
of soft cloth.To avoid damage to the ◆Turn the filter net inside out, and rinse it (carpets, etc.).
surface,do not use corrosive or volatile in water. ●Never connect the grounding wire with the live wire, or it may lead to an electric shock.
chemicals. ◆After inserting the claw, press the button ●If the power cord is damaged, it must be replaced by a qualified person to avoid a hazard.
to insert it into place.
If the following symptoms occur, please disconnect the power plug and perform the
◆A sound of “ba” means proper installation.
following checks:
Button head

Symptom Reason

Claw ● Check that the power supply is in good condition.

The washing
● Check that the power plug is inserted properly.
machine does ● Check that the wash timer knob or the spin timer knob is not
Anti-freezing protection not work. in the "0" position.
▲ To prevent from freezing: ● Check that the drain hose is not laid too high.
The drain hose
①Turn off the water tap, remove the water inlet hose and empty water in the water inlet ● Check that the drain hose is not frozen.
does not work. ● Check that the drain hose is not blocked by foreign matter.
hose completely.
②Lay the drain hose and turn the drain selector knob to the "Drain”position to There is abnormal ● Check that there are no coins or any other foreign objects
empty the water in the tub. noise during washing. dropped into the wash tub.
▲ If the water is frozen, please take the following steps:
There is abnormal ● Check that the washing machine is placed on flat, stable floor.
①Put the water inlet hose into warm water of about 50℃.
noise and violent ● Check that clothes are evenly distributed in the spin tub.
②Keep about 2 liters of warm water below 50℃ in the wash tub for
vibration during ● Check that there are no washing materials or foaming debris
about 10 minutes. and then lay the drain hose and turn the
spinning. dropped into the outside of the spin tub.
wash drain selector knob to the "Drain”position to empty the water .
③Fit the water inlet hose and turn on the water tap to
confirm water filling and draining work properly. Main Technical Parameters

Operation when objects are Wash Spin

dropped into the outside of the spin tub
Frame Capacity (dry Clothes) 13.0 kg 7.0kg
①Remove all screws on the frame with a screw driver and
loosen the connector of the brake belt . Cabinet Power Supply 240V/50Hz
②Pull up the frame with both hands and turn it backwards.
③Take out the clothes dropped into the outside of the spin tub. Input Power (lower drain) 450W 180W
④Fasten the connector of the brake belt ,Press the frame to
reset and tighten screws. Input Power (upper drain) 450W 180W
Maximum Time 15 min. 35 min.(soak wash) 5 min.
After you use the washing machine, never forget to do the following two things:
1. Disconnect the power plug. Water volume H: 87L M: 65L L: 42L /
2. Remove the water inlet hose.
-8-

Maximum water pressure 0.6Mpa

Notes
The washing machine employs alternative current with rated voltage and frequency . When voltage fluctuates Overall dimension 902x537x984(mm)
between -10% and 10% of the rated voltage, the machine can work normally.
Net weight Lower Drain System 30kg
Connection mode of the power cord of this machine is Y-shaped connection.Users should not detach or
reconnect the wire by themselves. If this part needs to be repaired, please contact the designated service center.
Upper Drain System 30.5kg
Pump Input Power 45W

-8- -9-