Power over Ethernet (PoE) Smart Design Power & Communication in Single Cable to

Connect All IP Products Follow Ethernet Communication as per

IEEE802.3at/IEEE802.3bt
Now IEEE802.3bt POE++/Ultra POE Mean More Power and Fast Data
Power with Ethernet Communication (POE) Advantages

IEEE 802.3bt standards and notes the minimum power per port to be supplied to the
powered devices. This minimum requirement accounts for power loss over the length of
the cable, with a maximum length set at 100m.
With each power increase, cabling requirements also increased, with Cat 5 cabling
being the minimum requirement for Type 3 (60W) and Type 4 (90W) PoE.

Great Market Approach

The standard also includes a mechanism to protect devices that do not support PoE: A
25-kW resistor is added between the power pairs on the powered device, and the power
source provides power only if something close to that resistive value is detected.
IEEE 802.3bt standard offers a host of new features and capabilities, such as support for highly
efficient 4-pair power delivery, and channel definitions for 2.5 gigabits per second (Gbps), 5
Gbps, and 10 Gbps PoE operations, among others. Ratified in September 2018, the new
specification also boosts the maximum power that power sourcing equipment (PSEs) are
capable of by a factor of three, expanding it from 30 to 90 watts, and elevates the power level
for powered devices (PDs) to 71.3 watts. Additionally, IEEE 802.3bt doubles the number of
supported classes from four to eight, addressing Type 3 and 4 devices for both PSEs and PDs
between 4 – 90 watts and 3.84 – 71.3 watts respectively.
The Building Services Research and Information Association (BSRIA), “worldwide PoE are
expected to grow at a compound annual growth rate (CAGR) of around 11-13% until 2023,
exceeding 180 million ports sold yearly by the end of the period.”
The proliferation of IP-connected network devices in the enterprise has not only driven the need
for faster data rates, but also increased power. This has thrown the door wide open for power
over Ethernet (PoE).
PoE allows connected devices to share data and power connectivity over a single copper Ethernet
cable—streamlining infrastructure and simplifying operations. While PoE has been part of the
enterprise network since 1999, its capabilities and importance have taken big leaps forward in
recent years with the development of higher-wattage PoE devices. These devices include
common enterprise fixtures such as desktop telephones, security cameras, video monitors and
wireless access points for Wi-Fi or in-building wireless services, among others. With today’s
advanced PoE technologies and devices, enterprise networks no longer need to run a separate ac
(alternating current) power feed to every connected device. And that’s just the beginning. The
benefits of PoE also include better-designed electrical safety features, better device management
and lower cost of installation and maintenance.

Whether it’s Wi-Fi access points, security cameras, LED lighting, IP phones, RFID security or
building management systems, the increasing range of PoE devices means there is a great
opportunity for the Enterprise to leverage remote power and better manage infrastructure-related
expenses while using existing cabling.

By using communications cabling to deliver remote power, PoE enables cost-effective power
delivery to a wide range of devices. Other advantages include:

 Smaller size of cables and connectors (versus ac line power) enables higher density.
 Continuous monitoring of the circuit for faults and other operating conditions
 Low-voltage cabling can be installed as part of the ITC network for safer, lower-cost
installations.
 Improved control and operation of devices for better facility management
 Synergies between power delivery and communications enable intelligent infrastructure.
 UPS backup, enabling robust and reliable operation.

Power Management Modes in POE Sources to Safeguard POE Powered Equipment’s

A switch or line card that supports PoE has a PoE controller. The controller determines
how much power to allocate to the PoE interfaces. If the power consumption of a
connected PD exceeds the maximum power allocated to that interface, the controller
turns off power to the interface.

The method used to allocate power depends on the power management mode:

Class Mode Power is allocated dynamically using the classification process. This is the
default mode.

Static Mode Power is allocated based on the maximum power configuration.

These methods are described below.

Classification
Classification is a process by which the power sourcing equipment (PSE) and powered
device (PD) exchange information to dynamically determine the power allocation. The
process begins when a PD is connected to a PoE interface and presents a class signature.
The PoE IEEE standards define classes for devices based on the levels of power they
require.

The PSE responds with a power allocation based on the class of the PD. If LLDP is
enabled on the interface, the allocation can be adjusted using LLDP power negotiation.

LLDP Power Negotiation

In class management mode, LLDP power negotiation can be used to refine the power
allocation to the PD though an exchange of LLDP messages. (If the actual power
requirement of the PD is a lower amount of power than it was allocated based on its
class designation the PSE can reduce the power allocation.

The negotiation power allocation will include some additional power guard to
accommodate cable length. This additional allocated power is approximately 15 percent
of the requested value, and it can allocate the power in small increments. For devices
that use LLDP power negotiation the power reserved for the interface is always greater
than the LLDP-requested power value by the external POE device.

LLDP power negotiation is enabled by default in class management mode for LLDP
interfaces. On interfaces that are in class management mode but are not enabled for
LLDP, the power allocation is determined solely by the class of the PD.

(Once power is allocated based on LLDP power negotiation LLDP power negotiation
remains in effect even if the interface link status goes off and on, or if the LLDP
configuration is changed.)

Maximum PoE Power Consumption The maximum PoE power consumption is the total
amount of power available for the PoE controller to all the PoE interfaces. In allocation
power, the PoE controller cannot exceed the maximum PoE power consumption.

If your switch supports power supplies of different Capacities keep the following points
in mind:

If you change your existing power supply to a lower-capacity power supply, the
maximum PoE power consumption might no longer be Sufficient to power all the PoE
ports on the switch.

If your switch supports redundant power supplies and you have installed power supplies
of different Capacities the maximum PoE power consumption is based on the wattage of
the lowest-capacity power supply.
 You cannot increase the number of PoE-capable ports on a switch by installing a power
supply that has a higher capacity.

The evolution of PoE: standards, Types and Classes

PoE cabling design and deployment.

Over the past decade, PoE has been seen as a key powering strategy—allowing network
managers, installers, and integrators to use structured cabling to provide both power and data to
many of their network devices. While the ability to run low-voltage power and data over the
same cable could significantly simplify deployment and management of PoE networks, planning
and designing them to achieve the best balance of cost, performance and manageability can be
tricky. Engineers must consider several key variables. Key factors that affect and influence the
efficient design and operation of your PoE network include:

 Channel topology: cable pathway infrastructure

 Managing thermal loads: cable bundling, spacing and lengths
 Selection of cables, cords, and connectors

802.3bt power over Ethernet standard (also known as four-pair PoE or simply 4PPoE)
stipulates support for a full 120 watts, deliverable via Category 6A cabling.

The number of PoE-enabled edge devices—such as HD/4K digital signage; pan, tilt and
zoom (PTZ) cameras; and smart LED lighting—is expected to continue to increase
demand.

PoE will likely also be considered as increasingly important as a stable backup power
source for converged edge devices where uptime is critical. For example, an HD camera
may feed data to multiple applications such as security systems, people counting,
machine learning (ML) analytics and occupancy sensors. By combining and centralizing
power and data at the network switch with dedicated power circuits, PoE simplifies and
automates troubleshooting and management.

The classes of powered devices and associated power levels. Because of line loss, the
power range of the powered device is less than the maximum power delivered at the PoE
port for each class. Line loss is influenced by cable length, cable quality, and other
factors and is typically less than 16 percent of the maximum power.

IEEE 802.3bt

The IEEE 802.3bt standard includes enhancements to Existing PoE Functionality by such
as power management, Negotiation and Classification.

Four Pair Standard

Previous IEEE PoE standards have used two pairs out of four pairs of twisted wire in an
Ethernet cable to deliver power. The pairs used depend on the mode of PoE Operation
mode A or mode B. In mode A, PoE delivers power on the same pairs used to deliver
data (pair 1-2 and pair 3-6). Mode B separates the power delivery from data delivery by
using the spare pairs for power (pair 4-5 and pair 7-8).

PoE-bt is the First IEEE standard to deliver power over all four pairs of wire. Pre-
standard of Implementation that provided power over four pairs, such as PoE-4P, are
replaced by this standard.
 Power Class Levels

PoE standards define classes of powered devices based on the levels of power that they
require. The IEEE 802.3bt standard introduces two new types of PoE powered devices,
type 3 and type 4, which add an additional four power class levels (5 through 8). Type 3,
which includes classes 5-6, can support up to 60 W of power, and type 4, which includes
classes 7-8, can support up to 120 W.

Powered Device Signatures

Before the power sourcing equipment (PSE) can deliver power to a connected powered
device (PD), it performs a series of checks on the PD. The First check is known as
signature detection The PSE uses a low voltage to measure the resistance of the PD. If the
correct level of resistance is detected, the switch knows that the PD is capable of
receiving power. In PoE-bt, signature detection is performed on each set of pairs: the data
pair and the spare pair. The connected PD must present a valid signature for each pair set
to show that it can accept 4-pair power.

The PSE then performs a connection check to determine if the PD is a single-signature or

a dual signature PD. Single-signature PDs have one signature that applies to both sets of
pairs: the data pair and the spare pair. Dual-signature PDs support two signatures, one for
each pair set. Dual-signature PDs can support two power channels on a single interface,
and each channel can support a different| power class.

LLDP Power Negotiation

IEEE 802.3bt supports enhanced power negotiation using Link Layer Discovery Protocol
(LLDP). LLDP power negotiation enables the PSE to refine the power allocation to the PD. (A
PD using LLDP can request a lower amount of power than it was allocated based on its class
designation)

PoE-bt extends the set of fields in the LLDP protocol to allow the PSE and PD to exchange
Information about the maximum amount of power that the PSE has available. This is not an -
allocation but can be used to inform the power request from the PD.

Auto Classification

The IEEE 802.3bt standard introduces automatic class functionality. The auto-class feature
allows the PSE to determine the actual maximum power drawn by the PD. The PSE measures the
power consumption of the PD over a define Time period. Based on that measurement, the PSE
sets the maximum power output for the PD.

PoE-bt Feature Support

PoE-bt supports the same features as previous versions of PoE, with the exception of the
following, which are not supported:

• Static power management mode

• Maximum power consumption

• Guard band

To know More

Please Contact

Mahesh Chandra Manav M-9811247237

[email protected]

Link Vue System Pvt Ltd India New Delhi www.linkvuesystem.com

Link Vue Systems Pty Ltd Australia Sydney www.linkvuesystems.com.au

[email protected]
 LINK VUE SYSTEM PVT LTD
LINK VUE PRODUCT PORTFOLIO-2023

1|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
INDOOR MEDIA CONVERTER & CHASSIS
SN Model Fiber Port Description
10/100M Fiber Media Converter
1 LV-MC0101F-SFP SFP Fiber Port 1*100M SFP Slot + 1*10/100M RJ45 Port, DC5V1A
2 LV-MC0101F-SC-M Dual Fiber 10/100M, SC, Multimode, 850nm, Dual Fiber, 2Km, DC5V1A
3 LV-MC0101F-SC-20 Dual Fiber 10/100M, SC, Single Mode, 1310nm, Dual Fiber, 20Km, DC5V1A
LV-MC0101FW-SC- 10/100M, SC, Single Mode, TX: 1310nm, RX: 1550nm, Single Fiber,
4 Single Fiber
20A 20Km, DC5V1A
LV-MC0101FW-SC- 10/100M, SC, Single Mode, TX: 1550nm, RX: 1310nm, Single Fiber,
5 Single Fiber
20B 20Km, DC5V1A
10/100/1000M Fiber Media Converter
6 LV-MC0101G-SFP SFP 1*1000M SFP Slot + 1*10/100/1000M RJ45 Port, DC5V1A
7 LV-MC0101G-SC-M Dual Fiber 10/100/1000M, SC, Multimode, 850nm, Dual Fiber, 550m, DC5V1A
10/100/1000M, SC, Single Mode, 1310nm, Dual Fiber, 20Km,
LV-MC0101G-SC-20 Dual Fiber
8 DC5V1A
LV-MC0101GW-SC- 10/100/1000M, SC, Single Mode, TX: 1310nm, RX: 1550nm, Single
Single Fiber
9 20A Fiber, 20Km, DC5V1A
LV-MC0101GW-SC- 10/100/1000M, SC, Single Mode, TX: 1550nm, RX: 1310nm, Single
Single Fiber
10 20B Fiber, 20Km, DC5V1A
2U 19" Rack-Mount Chassis
14 Slots 2U 19" Rack-Mount Chassis for Standalone Media Converter,
LV-RMC0014-2A Chassis
11 Dual Power, AC110-240V
16 Slots 2U 19" Rack-Mount Chassis for Card-Type Media Converter,
LV-RMC0016-2A Chassis
12 Dual Power, AC110-240V

INDUSTRIAL MEDIA CONVERTER &

ETHERNET SWITCH

All industrial switches comply.

➢12-58VDC input, redundant power supply with polarity reverse/over-
voltage protection. For Non-PoE.
➢44-57VDC input, redundant power supply with polarity reverse/over-
voltage protection. For PoE.
➢IP40 fan-less aluminum alloy housing and DIN-Rail hardware design with
compact size.
➢Operating temperature: -40℃ to 75℃.
➢Storage temperature: -40℃ to 85℃.
➢Relative humidity: 5% to 95%(non-condensing).
➢Certification = CE, FCC, RoHS.
➢Warranty = 5 Years

2|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
SN Model Fiber Port Description
Unmanaged - Industrial Ethernet Switch
1 LV-IMC0101F-SC-20 Dual Fiber Fiber Port 1*100M SC, 1*10/100M RJ45
2 LV-IMC0101FW-SC-20 Single Fiber Fiber Port 1*100M SC, 1*10/100M RJ45
3 LV-IMC0101F-SFP SFP Fiber Port 1*100M SFP, 1*10/100M RJ45
4 LV-IMC0102F-SC-20 Dual Fiber Fiber Port 1*100M SC, 1*10/100M RJ45
5 LV-IMC0102FW-SC-20 Single Fiber Fiber Port 1*100M SC, 1*10/100M RJ45
6 LV-IMC0102F-SFP SFP Fiber Port 1*100M SFP, 2*10/100M RJ45
7 LV-IMC0202F-SFP SFP Fiber Port 2*100M SFP, 2*10/100M RJ45
8 LV-IMC0101G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 1*10/100/1000M RJ45
9 LV-IMC0101GWSC-20 Single Fiber Fiber Port 1*1000M SC, 1*10/100/1000M RJ45
10 LV-IMC0101G-SFP SFP Fiber Port 1*1000M SFP, 1*10/100/1000M RJ45
11 LV-IMC0102G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 2*10/100/1000M RJ45
12 LV-IMC0102GWSC-20 Single Fiber Fiber Port 1*1000M SC, 2*10/100/1000M RJ45
13 LV-IMC0102G-SFP SFP Fiber Port 1*1000M SFP, 2*10/100/1000M RJ45
14 LV-IMC0202G-SFP SFP Fiber Port 2*1000M SFP, 2*10/100/1000M RJ45
15 LV-IES0005F 0 5*10/100M RJ45
16 LV-IES0008F 0 8*10/100M RJ45
17 LV-IES0016F 0 16*10/100M RJ45
18 LV-IES0104F-SC-20 Dual Fiber Fiber Port 1*100M SC, 4*10/100M RJ45
19 LV-IES0104FW-SC-20 Single Fiber Fiber Port 1*100M SC, 4*10/100M RJ45
20 LV-IES0104F-SFP SFP Fiber Port 1*100M SFP, 4*10/100M RJ45
21 LV-IES0204F-SC-20 Dual Fiber Fiber Port 2*100M SC, 4*10/100M RJ45
22 LV-IES0204FW-SC-20 Single Fiber Fiber Port 2*100M SC, 4*10/100M RJ45
23 LV-IES0204F-SFP SFP Fiber Port 2*100M SFP, 4*10/100M RJ45
24 LV-IES0206F-SC-20 Dual Fiber Fiber Port 2*100M SC, 6*10/100M RJ45
25 LV-IES0206FWSC-20 Single Fiber Fiber Port 2*100M SC, 6*10/100M RJ45
26 LV-IES0206F-SFP SFP Fiber Port 2*100M SFP, 6*10/100M RJ45
27 LV-IES0108F-SC-20 Dual Fiber Fiber Port 1*100M SC, 8*10/100M RJ45
28 LV-IES0108FW-SC-20 Single Fiber Fiber Port 1*100M SC, 8*10/100M RJ45
29 LV-IES0108F-SFP SFP Fiber Port 1*100M SFP, 8*10/100M RJ45
30 LV-IES0005G 0 5*10/100/1000M RJ45
31 LV-IES0008G 0 8*10/100/1000M RJ45
32 LV-IES0016G 0 18*10/100/1000M RJ45
33 LV-IES0104G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 4*10/100/1000M RJ45
34 LV-IES0104GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 4*10/100/1000M RJ45
35 LV-IES0104G-SFP SFP Fiber Port 1*1000M SFP, 4*10/100/1000M RJ45
36 LV-IES0105G-SFP SFP Fiber Port 1*1000M SFP, 5*10/100/1000M RJ45
37 LV-IES0108G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 8*10/100/1000M RJ45
38 LV-IES0108GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 8*10/100/1000M RJ45
39 LV-IES0108G-SFP SFP Fiber Port 1*1000M SFP, 8*10/100/1000M RJ45
40 LV-IES0204G-SFP SFP Fiber Port 2*1000M SFP, 4*10/100/1000M RJ45
41 LV-IES0208G-SC-20 Dual Fiber Fiber Port 2*1000M SC, 8*10/100/1000M RJ45
42 LV-IES0208GW-SC-20 Single Fiber Fiber Port 2*1000M SC, 8*10/100/1000M RJ45
43 LV-IES0208G-SFP SFP Fiber Port 2*1000M SFP, 8*10/100/1000M RJ45

3|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
44 LV-IES0408G-SFP SFP Fiber Port 4*1000M SFP, 8*10/100/1000M RJ45
45 LV-IES01G08FSC-20 Dual Fiber Fiber Port 1*1000M SC, 8*10/100M RJ45
46 LV-IES01G08FW-SC-20 Single Fiber Fiber Port 1*1000M SC, 8*10/100M RJ45
47 LV-IES01G08F-SFP SFP Fiber Port 1*1000M SFP, 8*10/100M RJ45
48 LV-IES02G08F-SC-20 Dual Fiber Fiber Port 2*1000M SC, 8*10/100M RJ45
49 LV-IES02G08FW-SC-20 Single Fiber Fiber Port 2*1000M SC, 8*10/100M RJ45
50 LV-IES02G08F-SFP SFP Fiber Port 2*1000M SFP, 8*10/100M RJ45
PoE-Unmanaged - Industrial Ethernet Switch
51 LV-IPS0101F-SC-20 Dual Fiber Fiber Port 1*100M SC, 1*10/100M PoE RJ45
52 LV-IPS0101FW-SC-20 Single Fiber Fiber Port 1*100M SC, 1*10/100M PoE RJ45
53 LV-IPS0101F-SFP SFP Fiber Port 1*100M SFP, 1*10/100M PoE RJ45
54 LV-IPS0102F-SC-20 Dual Fiber Fiber Port 1*100M SC, 2*10/100M PoE RJ45
55 LV-IPS0102FW-SC-20 Single Fiber Fiber Port 1*100M SC, 2*10/100M PoE RJ45
56 LV-IPS0102F-SFP SFP Fiber Port 1*100M SFP, 2*10/100M PoE RJ45
57 LV-IPS0202F-SFP SFP Fiber Port 2*100M SFP, 2*10/100M PoE RJ45
58 LV-IPS0101G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 1*10/100/1000M PoE RJ45
59 LV-IPS0101GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 1*10/100/1000M PoE RJ45
60 LV-IPS0101G-SFP SFP Fiber Port 1*1000M SFP, 1*10/100/1000M PoE RJ45
61 LV-IPS0102G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 2*10/100/1000M PoE RJ45
62 LV-IPS0102GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 2*10/100/1000M PoE RJ45
63 LV-IPS0102G-SFP SFP Fiber Port 1*1000M SFP, 2*10/100/1000M PoE RJ45
64 LV-IPS0202G-SFP SFP Fiber Port 2*1000M SFP, 2*10/100/1000M PoE RJ45
65 LV-IPS0005F 0 5*10/100M PoE
66 LV-IPS0008F 0 8*10/100M PoE
67 LV-IPS0104F-SC-20 Dual Fiber Fiber Port 1*100M SC, 4*10/100M PoE RJ45
68 LV-IPS0104FW-SC-20 Single Fiber Fiber Port 1*100M SC, 4*10/100M PoE RJ45
69 LV-IPS0104F-SFP SFP Fiber Port 1*100M SFP, 4*10/100M PoE RJ45
70 LV-IPS0108F-SC-20 Dual Fiber Fiber Port 1*100M SC, 8*10/100M PoE RJ45
71 LV-IPS0108FW-SC-20 Single Fiber Fiber Port 1*100M SC, 8*10/100M PoE RJ45
72 LV-IPS0108F-SFP SFP Fiber Port 1*100M SFP, 8*10/100M PoE RJ45
73 LV-IPS0204F-SC-20 Dual Fiber Fiber Port 2*100M SC, 4*10/100M PoE RJ45
74 LV-IPS0204FW-SC-20 Single Fiber Fiber Port 2*100M SC, 4*10/100M PoE RJ45
75 LV-IPS0204F-SFP SFP Fiber Port 2*100M SFP, 4*10/100M PoE RJ45
76 LV-IPS0206F-SC-20 Dual Fiber Fiber Port 2*100M SC, 6*10/100M PoE RJ45
77 LV-IPS0206FW-SC-20 Single Fiber Fiber Port 2*100M SC, 6*10/100M PoE RJ45
78 LV-IPS0206F-SFP SFP Fiber Port 2*100M SFP, 6*10/100M PoE RJ45
79 LV-IPS0005G 0 5*10/100/1000M PoE RJ45
80 LV-IPS0008G 0 8*10/100/1000M PoE RJ45
81 LV-IPS0016G 0 16*10/100/1000M PoE RJ45
82 LV-IPS0104G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 4*10/100/1000M PoE RJ45
83 LV-IPS0104GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 4*10/100/1000M PoE RJ45
84 LV-IPS0104G-SFP SFP Fiber Port 1*1000M SFP, 4*10/100/1000M PoE RJ45
Fiber Port 1*1000M SFP, 4*10/100/1000M PoE RJ45,
85 LV-IPS0105G-SFP SFP
1*10/100/1000M RJ45
86 LV-IPS0108G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 8*10/100/1000M PoE RJ45

4|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
87 LV-IPS0108GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 8*10/100/1000M PoE RJ45
88 LV-IPS0108G-SFP SFP Fiber Port 1*1000M SFP, 8*10/100/1000M PoE RJ45
89 LV-IPS0204G-SFP SFP Fiber Port 2*1000M SFP, 4*10/100/1000M PoE RJ45
90 LV-IPS0208G-SC-20 Dual Fiber Fiber Port 2*1000M SC, 8*10/100/1000M PoE RJ45
91 LV-IPS0208GW-SC-20 Single Fiber Fiber Port 2*1000M SC, 8*10/100/1000M PoE RJ45
92 LV-IPS0208G-SFP SFP Fiber Port 2*1000M SFP, 8*10/100/1000M PoE RJ45
93 LV-IPS0408G-SFP SFP Fiber Port 4*1000M SFP, 8*10/100/1000M PoE RJ45
94 LV-IPS02G08F-SC-20 Dual Fiber Fiber Port 2*1000M SC, 8*10/100M PoE RJ45
95 LV-IPS02G08FW-SC-20 Single Fiber Fiber Port 2*1000M SC, 8*10/100M PoE RJ45
96 LV-IPS02G08F-SFP SFP Fiber Port 2*1000M SFP, 8*10/100M PoE RJ45
Managed - Industrial Ethernet Switch
97 LV-MIES0104F-SC-20 Dual Fiber Fiber Port 1*100M SC, 4*10/100M RJ45
98 LV-MIES0104FW-SC-20 Single Fiber Fiber Port 1*100M SC, 4*10/100M RJ45
99 LV-MIES0104F-SFP SFP Fiber Port 1*100M SFP, 4*10/100M RJ45
100 LV-MIES0204F-SFP SFP Fiber Port 2*100M SFP, 4*10/100M RJ45
101 LV-MIES0104G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 4*10/100/1000M RJ45
102 LV-MIES0104GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 4*10/100/1000M RJ45
103 LV-MIES0104G-SFP SFP Fiber Port 1*1000M SFP, 4*10/100/1000M RJ45
104 LV-MIES0204G-SFP SFP Fiber Port 2*1000M SFP, 4*10/100/1000M RJ45
105 LV-MIES0208G-SFP SFP Fiber Port 2*1000M SFP, 8*10/100/1000M RJ45
106 LV-MIES0408G-SFP SFP Fiber Port 4*1000M SFP, 8*10/100/1000M RJ45
PoE-Managed - Industrial Ethernet Switch
107 LV-MIPS0104F-SC-20 Dual Fiber Fiber Port 1*100M SC, 4*10/100M PoE RJ45
108 LV-MIPS0104FW-SC-20 Single Fiber Fiber Port 1*100M SC, 4*10/100M PoE RJ45
109 LV-MIPS0104F-SFP SFP Fiber Port 1*100M SFP, 4*10/100M PoE RJ45
110 LV-MIPS0204F-SFP SFP Fiber Port 2*100M SFP, 4*10/100M PoE RJ45
111 LV-MIPS0104G-SC-20 Dual Fiber Fiber Port 1*1000M SC, 4*10/100/1000M PoE RJ45
112 LV-MIPS0104GW-SC-20 Single Fiber Fiber Port 1*1000M SC, 4*10/100/1000M PoE RJ45
113 LV-MIPS0104G-SFP SFP Fiber Port 1*1000M SFP, 4*10/100/1000M PoE RJ45
114 LV-MIPS0204G-SFP SFP Fiber Port 2*1000M SFP, 4*10/100/1000M PoE RJ45
115 LV-MIPS0208G-SFP SFP Fiber Port 2*1000M SFP, 8*10/100/1000M PoE RJ45
116 LV-MIPS0408G-SFP SFP Fiber Port 4*1000M SFP, 8*10/100/1000M PoE RJ45
Managed - Industrial Ethernet Switch
4*1.25G/2.5G Base-X SFP ports + 16*10/100/1000Base-T
RJ45 ports,
117 LV-IS6220G-4GX16GT SFP
Dual redundant 12-75VDC input, Din-Rail, Operation
temperature -40°C to 80 °C
4*1.25G.2.5G SFP slot + 24*10/100/1000M PoE Port, 44-
118 LV-S8228G-4GX24GT SFP
57VDC, -40-75℃
24*10/100/1000M RJ45 Port PoE + 4*1000M SFP Slot,
119 LV-9000-85-4GX24GT-HR-V) SFP
100-240VAC)
Unmanaged - Industrial Ethernet Switch
4*1000Base-X SFP ports + 16*10/100/1000Base-T RJ45
ports,
120 LV-IS6020G-4GX16GT SFP
Dual redundant 12-58VDC input, Din-Rail, Operation
temperature -40°C to 75 °C

5|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
Managed - Industrial Ethernet Switch (Rack-mount)
Managed industrial Ethernet switch with
4*1.25G/2.5GBase-X SFP ports, 24*10/100/1000Base-T
121 LV-IS6228G-4GX24GT SFP RJ45 ports,
AC 100-240V 50/60Hz and DC 36-75V input, Rack-
mounted, Operation temperature -40°C to 80 °C
Managed industrial PoE switch with 4*1.25G/2.5GBase-X
SFP ports, 24*10/100/1000Base-T RJ45 PoE ports,
122 LV-IS6228GP-4GX24GT-U-2DC SFP
Dual DC 44-57V input, PoE budget ≤ 370W, Rack-mounted,
Operation temperature -40°C to 75 °C

MANAGED & UNMANAGED ETHERNET

SWITCH
SN Model Fiber Port Description
Layer 2 managed PoE switch with 4*1G/2.5G/10G SFP+ slots +
Access Switch - 24
1 LV-S8228XGP-4XS24GT 24*10/100/1000M RJ45 PoE ports. AC 100-240V 50/60Hz, total
Port POE
power consumption 440W
Layer 2 managed PoE switch with 4*1G/2.5G/10G SFP+ slots +
Access Switch - 48
2 LV-S8252XGP-4XS48GT
Port POE
48*10/100/1000 RJ45 PoE ports. AC 100-240V 50/60Hz, total power
consumption 440W
Server Farm Switch - Layer 2 managed Ethernet switch with 4*1G SFP
3 LV-S8228G-4GX24GT
24 Port slots，24*10/100/1000M RJ45 ports. AC 100-240V 50/60Hz
Unmanaged Ethernet switch with 2*1G SFP slots and
Network Switch for
4 LV-S6028G-2GT2GX24GT 2*10/100/1000M RJ45 uplink +24*10/100/1000M RJ45 ports
Server Room - 24 port
downlink. AC 100-240V 50/60HZ

MINI Media Converter

PoE Ethernet Extender
SFP- 155Mbps & 1.25Gbps

6|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD

New Product

7|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD

SFP Series - 155Mbps & 1.25Gbps

8|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
Model- LVPS-E35-02L / LVPS-E53-02L
Product Specification
155Mbps BIDI SFP Optical Transceiver, 2K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 2Km transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPS-E35-02LD / LVPS-E53-02LD

Product Specification
155Mbps BIDI SFP Optical Transceiver，2K m, DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 2Km transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

9|Page w ww. L i n k v uesyste m. com

 LINK VUE SYSTEM PVT LTD
Model- LVPS-E35-20L / LVPS-E53-20L
Product Specification
155Mbps BIDI SFP Optical Transceiver，20K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPS-E35-20LD / LVPS-E53-20LD

Product Specification
155Mbps BIDI SFP Optical Transceiver，20K m, DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

10 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPS-E35-40L / LVPS-E53-40L
Product Specification
155Mbps BIDI SFP Optical Transceiver，40K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPS-E35-40LD / LVPS-E53-40LD

Product Specification
155Mbps BIDI SFP Optical Transceiver，40K m, DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm FP Laser and 1310nm PIN photodetector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

11 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPS-E35-60L / LVPS-E53-60L
Product Specification
155Mbps BIDI SFP Optical Transceiver，60K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm DFB Laser and 1310nm PIN photodetector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model-LVPS-E35-60LD / LVPS-E53-60LD
Product Specification
155Mbps BIDI SFP Optical Transceiver，60K m, DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and 1550nm PIN photodetector
⚫ 1550nm DFB Laser and 1310nm PIN photodetector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

12 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPS-E35-80L / LVPS-E53-80L
Product Specification
155Mbps BIDI SFP Optical Transceiver，80K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm DFB Laser and 1550nm PIN photodetector
⚫ 1550nm DFB Laser and 1310nm PIN photodetector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPS-E35-80LD / LVPS-E53-80LD

Product Specification
155Mbps BIDI SFP Optical Transceiver，80K m, DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm DFB Laser and 1550nm PIN photodetector
⚫ 1550nm DFB Laser and 1310nm PIN photodetector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

13 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-E39-02L
Product Specification
155Mbps SFP Optical Transceiver, 2Km
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and PIN photo detector
⚫ Up to 2Km transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-E39-02L-D
Product Specification
155Mbps SFP Optical Transceiver, 2Km，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP Laser and PIN photo detector
⚫ Up to 2Km transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

14 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-E39-20L
Product Specification
155Mbps SFP Optical Transceiver, 20K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-E39-20L-D
Product Specification
155Mbps SFP Optical Transceiver, 20K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

15 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-E39-40L
Product Specification
155Mbps SFP Optical Transceiver, 40K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-E39-40LD
Product Specification
155Mbps SFP Optical Transceiver, 40K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

16 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-E39-60L
Product Specification
155Mbps SFP Optical Transceiver, 60K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-E39-60LD
Product Specification
155Mbps SFP Optical Transceiver, 60K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

17 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-E39-80L
Product Specification
155Mbps SFP Optical Transceiver, 80K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1550nm DFB laser and PIN photo detector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-E39-80LD
Product Specification
155Mbps SFP Optical Transceiver, 80K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm DFB laser and PIN photo detector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

18 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-G39-20L
Product Specification
1.25Gbps SFP Optical Transceiver, 20K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-G39-20LD
Product Specification
1.25Gbps SFP Optical Transceiver, 20K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 20Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

19 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-G39-40L
Product Specification
1.25Gbps SFP Optical Transceiver, 40K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-G39-40LD
Product Specification
1.25Gbps SFP Optical Transceiver, 40K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 40Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

20 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-G39-60L
Product Specification
1.25Gbps SFP Optical Transceiver, 60K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
Compatible with RoHS

Model- LVPD-G39-60LD
Product Specification
1.25Gbps SFP Optical Transceiver, 60K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1310nm FP laser and PIN photo detector
⚫ Up to 60Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

21 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Mode- LVPD-G59-80L
Product Specification
1.25Gbps SFP Optical Transceiver, 80K m
1. Feature:
⚫ SFP package with LC connector
⚫ 1550nm DFB laser and PIN photodetector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
Compatible with RoHS

Model- LVPD-G59-80LD
Product Specification
1.25Gbps SFP Optical Transceiver, 80K m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 1550nm DFB laser and PIN photodetector
⚫ Up to 80Km transmission on SMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

22 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LVPD-G88-05L
Product Specification
1.25Gbps SFP Optical Transceiver, 550m
1. Feature:
⚫ SFP package with LC connector
⚫ 850nm VCSEL Laser and PIN photodetector
⚫ Up to 550m transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS

Model- LVPD-G88-05LD
Product Specification
1.25Gbps SFP Optical Transceiver, 550m，DDM
1. Feature:
⚫ SFP package with LC connector
⚫ 850nm VCSEL Laser and PIN photodetector
⚫ Up to 550m transmission on 50/125 um MMF
⚫ +3.3V single power supply
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Digital Diagnostic SFF-8472 compliant

23 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-CWDM-XX-ER
10Gb/s CWDM 40KM SFP+ Transceiver

PRODUCT FEATURES

⚫ Hot-pluggable SFP+ footprint

⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 40km
⚫ CWDM wavelength EML transmitter, PIN photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

Model- LV-SFP+-CWDM-XX-ZR
10Gb/s CWDM 70KM SFP+ Transceiver
PRODUCT FEATURES
⚫ Hot-pluggable SFP+ footprint
⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 70km
⚫ CWDM wavelength EML transmitter, APD photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

24 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-DWDM-XX-ER
10Gb/s DWDM 40KM SFP+ Transceiver

PRODUCT FEATURES

⚫ Hot-pluggable SFP+ footprint

⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 40km
⚫ DWDM wavelength EML transmitter, PIN photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

Model- LV-SFP+-DWDM-XX-ZR
10Gb/s DWDM 80KM SFP+ Transceiver
PRODUCT FEATURES
⚫ Hot-pluggable SFP+ footprint
⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 80km
⚫ DWDM wavelength EML transmitter, APD photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

25 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-ER
10Gb/s 1550nm SFP+ Transceiver

PRODUCT FEATURES

⚫ Hot-pluggable SFP+ footprint

⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 40km
⚫ 1550nm EML transmitter, PIN photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

Model- LV-SFP+-LR
10Gb/s 1310nm SFP+ Transceiver
1.Feature：
⚫ SFP+ package with LC connector
⚫ 1310nm DFB Laser and PIN photo detector
⚫ Up to 20km transmission on SMF
⚫ Power dissipation < 1W
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

26 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-SR
10Gb/s 850nm SFP+ Transceiver
1. Feature:
⚫ SFP+ package with LC connector
⚫ 850nm VCSEL Laser and PIN photo detector
⚫ Up to 300m transmission on 2000MHz-km MMF
⚫ Power dissipation < 1W
⚫ LVPECL compatible data input/output interface
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compatible with SFF8472

Model- LV-SFP+-ZR
10Gb/s 1550nm SFP+ Transceiver

PRODUCT FEATURES

⚫ Hot-pluggable SFP+ footprint

⚫ Supports 9.5 to 10.3Gb/s bit rates
⚫ Power dissipation < 1.5W
⚫ Single 3.3V power supply
⚫ Maximum link length of 80km
⚫ 1550nm EML transmitter, APD photo-detector
⚫ Duplex LC connector
⚫ Power dissipation < 1.5W
⚫ Built-in digital diagnostic functions
⚫ Case temperature range ：-5°C to 70°C

27 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-BD/U-10L
10Gb/s SFP+ BIDI Transceiver
1.Feature
⚫ SFP+ package with LC connector
⚫ 1270nm(1330nm) DFB Laser and PIN-TIA photodetector
⚫ Up to 10Km transmission on SMF
⚫ Up to 11.3Gbps Data Links
⚫ Support dual CDR in TX and RX channel(optional)
⚫ +3.3V single power supply
⚫ Power dissipation<1.5W
⚫ 2-wire interface with integrated Digital Diagnostic monitoring
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compliant with SFF-8472 SFP+ MSA
⚫ Compliant to SFP+ SFF-8431 and SFF-8432

Model- LV-SFP+-BD/U-40L
10Gb/s SFP+ BIDI Transceiver
1.Feature
⚫ SFP+ package with LC connector
⚫ 1270nm(1330nm) DFB Laser and PIN-TIA photodetector
⚫ Up to 40Km transmission on SMF
⚫ Up to 11.3Gbps Data Links
⚫ Support dual CDR in TX and RX channel(optional)
⚫ +3.3V single power supply
⚫ Power dissipation<1.5W
⚫ 2-wire interface with integrated Digital Diagnostic monitoring
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compliant with SFF-8472 SFP+ MSA
⚫ Compliant to SFP+ SFF-8431 and SFF-8432

28 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Model- LV-SFP+-BD/U-60L
10Gb/s SFP+ BIDI Transceiver
1.Feature
⚫ SFP+ package with LC connector
⚫ 1270nm(1330nm) DFB Laser and APD photodetector
⚫ Up to 60Km transmission on SMF
⚫ Up to 11.3Gbps Data Links
⚫ Support dual CDR in TX and RX channel(optional)
⚫ +3.3V single power supply
⚫ Power dissipation<1.5W
⚫ 2-wire interface with integrated Digital Diagnostic monitoring
⚫ Low EMI and excellent ESD protection
⚫ laser safety standard IEC-60825 compliant
⚫ Compatible with RoHS
⚫ Compliant with SFF-8472 SFP+ MSA
⚫ Compliant to SFP+ SFF-8431 and SFF-8432

6/12/24/48 Port Patch Panel/LIU

29 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
FIBER PATCH PANEL
SPECIFICATIONS: -
• Material: Mild Steel/Aluminum with 7 Tank Process powder coating.
• Color: RAL 7035/Black
• Cable grommet: FR grade nylon
• Splice Holder: FR grade ABS
• Splice Holder Dimension: 90*55*15 mm (L*W*H) cable
• Cable Glands: Nylon with nitrile butadiene rubber, diameter of 5mm to 14mm max available
• Fiber components standard: Telcordia GR 326
• Insertion Loss: less <3dB (Multimode), <2dB (Singlemode)
• Plug/Unplug durability: 1000 times

APPLICATIONS • Data Center

• Telecom
• Private Network
• Security Surveillance Applications
• Enterprise applications
• Central offices

PRODUCTS FEATURES
• MS/Aluminum housing with seven tank process powder coating.
• Suitable for 19"Rack mount Applications.
• Replaceable adapter panel for SC/ST/LC/FC type couplers
• Can manage adaptor panel for maximum 96 ports in SC/96, LC In 20 size.
• Capable of storing up to 3 meters of 900-micron light buffered fiber cable.
• Allow maximum four cables entry,
• Patch or fusion splice field termination standard.
• Splice holder for pigtail splicing
• High Impact resistance splicing tray & cable spool for fiber & pigtail routing.
• Accessory kit includes mounting ear, cable gland, cable ties and screws.

Nano Din Rail LIU Micro Din Rail LIU Mini Din Rail LIU
2/4/6 Port SM/MM 2/4/6/8/12 Port 2/4/6/8/12/24 Port
SM/MM SM/MM

Medium Din Rail LIU

2/4/6/8/12/24/48 Port
SM/MM

APPLICATIONS • Indoor Premise Networks

• Central offices (FTTX)

30 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
• Data Centers
• Security Surveillance Applications
• Process Automation & Control Systems
• Telecommunication Network
• FTTH Services

SM-SC/LC/FC/ST
FIBER PATCH CORD
MM-SC/LC/FC/E200

Duplex SM Patch cord 20/25 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 25M

PVC)
Duplex SM Patch cord 40/50 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 50M
PVC)
Duplex SM Patch Cord 1 METER -SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 1M PVC)
Duplex SM Patch Cord 3 METER SC TO LC (LC/UPC-SC/UPC, SM, DX, 2.0MM 3M, LSZH)

Simplex SM Patch cord 20/25 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 25M

PVC)
Simplex SM Patch cord 40/50 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 50M
PVC)
Simplex SM Patch Cord 1 METER -SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 1M PVC)
Simplex SM Patch Cord 3 METER SC TO LC (LC/UPC-SC/UPC, SM, DX, 2.0MM 3M,
LSZH)

Duplex MM Patch cord 20/25 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 25M

PVC)
Duplex MM Patch cord 40/50 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 50M
PVC)
Duplex MM Patch Cord 1 METER -SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 1M PVC)
Duplex MM Patch Cord 3 METER SC TO LC (LC/UPC-SC/UPC, SM, DX, 2.0MM 3M,
LSZH)

Simplex MM Patch cord 20/25 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 25M

PVC)
Simplex MM Patch cord 40/50 METER SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 50M
PVC)
Simplex MM Patch Cord 1 METER -SC TO LC (SC/UPC-LC/UPC SM DX 2.0mm 1M PVC)
Simplex MM Patch Cord 3 METER SC TO LC (LC/UPC-SC/UPC, SM, DX, 2.0MM 3M,
LSZH)

31 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

32 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

Outdoor Networking Solution

33 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

One of the greatest challenges in modern networking is spanning large distances while staying within
a budget. Unfortunately, cheap hardware usually fails to accommodate longer ranges or succumbs to
harsh outdoor environments. That forces you into more expensive technologies, like fiber optics, which
may not be affordable.

34 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
For Wi-Fi communication to reach spans further than the IEEE 802.11b/g/n standard of a few hundred
feet, point-to-point wireless bridging could be the perfect solution you seek. Bridging helps networks
transmit across miles using traditional Wi-Fi, cuts installation costs by orders of magnitude, and offers
better performance than many competing solutions. Take a minute to explore point-to-point wireless
bridging and all that it offers. You might have found the best way to solve your networking challenges.

The Architecture of Point-to-Point Wireless Bridging

Point-to-point wireless bridging is one of the most
reliable ways to connect remote Wi-Fi assets. For
outdoor applications and campus-level
networking, it presents an option to connect access
points and clients over an area without the need
for excessive and costly cabling.

The technology typically works using directional

line-of-sight antennas, which concentrate the
signal to each point in the bridge, enabling
stronger reception and transmission and less
power consumption. The architecture also
mitigates signal-to-noise problems and data loss.
For these reasons, line-of-sight Wi-Fi typically
maintains 99.99% reliability.

35 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
8 Advantages of Preconfigured Wi-Fi Bridges
The WA212BP-2 (a pair of WA212BP Wi-Fi access points) are configured and tested to work
together, saving installation time. It delivers high-performance, long-range communication,
plug-and-play setup, affordability, and other benefits as well:

1. Easy Network Extension and

Adaptation

2. Lowering Outdoor Infrastructure

Costs

3. High-Level Security

4. High-Speed Networking

5. Layer 3 Features

6. Passive PoE

7. Integrated Cloud Support

8. Light Weight Equipment

The Bottom Line on Point-to-Point Wireless

Bridges
Point-to-point Wi-Fi bridging is a cost-effective and excellent method of wireless
communication. If you want to explore networking possibilities fully, we can help. Contact
https://www.linkvuesystem.com/index.php today and speak with one of our experts. We will
discuss your operation and the specific network challenges that you face. Our comprehensive
list of hardware and system solutions will consolidate equipment, save money, and fulfill
nearly every networking requirement. If you want the most out of your network, we can be
one of your most valuable resources.

36 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
SURGE PROTECTOR’S PARAMETERS

Uc (Maximum continuous operating Voltage)

Maximum effective voltage that can be applied permanently to the terminals of the protection device.
In (Nominal current)
Peak current in 8/20 μs waveform the protection device can withstand 20 times without reaching end of
life.
Imax (Maximum discharge current)
Peak current with 8/20 μs waveform which the protection device can withstand.
Iimp (Impulse current)
Peak current with 10/350 μs waveform which the protection device can withstand without reaching end
of life.
Up (Voltage protection level)
Maximum residual voltage between the terminals of the protection device during the application of a peak
current.
Ures (Residual voltage)
Residual voltage of the surge protector during an 8/20μs current waveform injection at a determined
rating.
TOV (Temporary Overvoltage)
The temporary overvoltage is the maximum AC voltage the surge protector can withstand during defined
durations (5 seconds and 120 mn), without failure or with controlled disconnection. This parameter U T is
greater to Uc. An additional test is required for TT AC system, to simulate a temporary «high voltage»
overvoltages (TOV) between Neutral and PE (application of 1200 Vac, 300 A for 200 ms): the compliance
with this test requires the use of the CT2 diagram (specific gas tube between N and PE)
2. CLASSIFICATION OF SURGE PROTECTORS
Protection devices are classified into types according to discharge capacity:
Type 1:
Tested with a 10/350 μs waveform (Class I test), which simulates the current produced by a direct
lightning strike. Ability to discharge very high currents to earth, providing a high Up - voltage protection
level. Must be accompanied by downstream Type 2 protectors. Designed for use in incoming power supply
panels where the risk of lightning strike is high, for example in buildings with an external protection
system.

37 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Type 2:
Tested with a 8/20 μs waveform (Class II test), which simulates the current produced in the event of a
switching or lightning strike on the distribution line or its vicinity. Ability to discharge high currents to
earth, providing a medium Up - voltage protection level. Designed for use in distribution panels located
downstream of Type 1 protectors or in incoming power supply panels in areas with low exposure to
lightning strikes.
Type 3:
Tested with a combined 1.2/50 μs - 8/20 μs waveform (Class III test), which simulates the current and
voltage that can reach the equipment to be protected. Ability to discharge medium currents to earth,
providing a low Up - voltage protection level. Always installed downstream of a Type 2 protection, it is
designed to protect sensitive equipment or equipment located more than 20m downstream of the Type 2
device.
LINK VUE STRONG RECOMMENDATION UNDER THE SYSTEM LONG LIFE / DURABILITY, EARTHING & SPD’s FOR ALL
SYSTEM LIKE CCTV ENCLOSURE, CCTV POLES ETC.
Surge Protection to protect Electrical and Telecom Equipment’s from Lightning, Over Voltages, Transients and Surges for
Incoming and Distribution of Power Supply Direct, Through UPS, Inverter , Lithium Battery Power Storage System along
with Solar PV Power.
Link Vue Systems Pvt Ltd Is an Authorized Executive Distributor of Enter Range of Surgeprotec Products
In the territory of INDIA, SINGAPORE, BANGLADESH & AUSTRALIA.
Make: -SPT/Surge Protection
Type 1/Class I SPD
NO. Uc (V) Capacity Description
1 SPT25-XXX/1 1P
2 SPT25-XXX/1S 1P (Signal transmission)
3 SPT25-XXX/2 2P
4 SPT25-XXX/2S 2P (Signal transmission)
150 275 320 385 440
5 SPT25-XXX/3 3P
6 SPT25-XXX/3S 3P (Signal transmission)
7 SPT25-XXX/4 Iimp 4P
8 SPT25-XXX/4S 25kA/50kA 4P (Signal transmission)
9 SPT25-XXX/1+1 1P+NPE
10 SPT25-XXX/1S+1 1P+NPE (Signal
transmission)
150 275 320 385
11 SPT25-XXX/3+1 3P+NPE
12 SPT25-XXX/3S+1 3P+NPE (Signal
transmission)
Type 1/2 Class I/II SPD
NO. Model No. Uc (V) Capacity Description
13 SPT12.5-XXX/1 1P
14 SPT12.5-XXX/1S 75 150 275 320 385 1P (Signal transmission)
15 SPT12.5-XXX/2 440 2P
16 SPT12.5-XXX/2S 2P (Signal transmission)
17 SPT12.5-XXX/3 3P
18 SPT12.5-XXX/3S Iimp 3P (Signal transmission)
15,02,75,32,03,85,440
19 SPT12.5-XXX/4 12.5kA 4P
20 SPT12.5-XXX/4S 4P (Signal transmission)
21 SPT12.5-XXX/1+1 1P+NPE
22 SPT12.5-XXX/1S+1 75 150 275 320 1P+NPE (Signal
transmission)
23 SPT12.5-XXX/3+1 150 275 320 3P+NPE

38 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
24 SPT12.5-XXX/3S+1 3P+NPE (Signal
transmission)
Type 2 Class II SPD
NO. Model No. Uc (V) Capacity Description
25 SPT40-XXX/1 1P
26 SPT40-XXX/1S 75 150 275 320 385 1P (Signal transmission)
27 SPT40-XXX/2 440 2P
28 SPT40-XXX/2S 2P (Signal transmission)
29 SPT40-XXX/3 3P
30 SPT40-XXX/3S 3P (Signal transmission)
150 275 320 385 440
31 SPT40-XXX/4 4P
In 20kA
32 SPT40-XXX/4S 4P (Signal transmission)
33 SPT40-XXX/1+1 1P+NPE
34 SPT40-XXX/1S+1 75 150 275 320 1P+NPE (Signal
transmission)
35 SPT40-XXX/3+1 3P+NPE
36 SPT40-XXX/3S+1 150 275 320 385 3P+NPE (Signal
transmission)
PV System SPD
NO. Model No. Uc (V) SPEC. Description
37 SPT12.5-PV1000-(S) 1000 DC 3P (Signal transmission)
Iimp
38 SPT12.5-PV1200-(S) 1200 DC 3P (Signal transmission)
6.25kA
39 SPT12.5-PV1500-(S) 1500 DC 3P (Signal transmission)
40 SPT40-PV600-(S) 600 DC 2P (Signal transmission)
41 SPT40-PV1000-(S) 1000 DC 3P (Signal transmission)
In 20kA
42 SPT40-PV1200-(S) 1200 DC 3P (Signal transmission)
43 SPT40-PV1500-(S) 1500 DC 3P (Signal transmission)
Coaxial & RF systems
NO. Model No. Uc (V) SPEC. Description
44 SPT CP BNC-FF-XXX Female-Female
70 180 280 In 10kA
45 SPT CP BNC-MF-XXX Male-Female
Telecommunication & Data Networks
NO. Model No. Uc (V) SPEC. Description
46 SPT-DC 6~170V In 10kA
47 SPT DT-CAT 6A In 10kA L- PoE 1000M
58 DC
PG

39 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
Earthing Monitoring Systems with Alarm
Hooter

40 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

41 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

A grounding system is a fundamental element of any electrical installation, which protects

equipment and people from dangerous voltage differences. Effective grounding requires a
low ground resistance because the step and touch voltages are directly dependent on this
value. The status and functionality of the grounding system must be guaranteed by periodic
inspections, since both safety elements (protections, insulation, etc.) and functional
elements (filters, measurement lines, screens, etc.) can be affected, causing serious risks to
goods, equipment, and people. Grounding is the common element where structural,
electrical, piping, etc. elements are directly or indirectly connected. Any malfunction or
defect generates certain activity in the grounding system that can be detected and used as
an indicator of failure or degradation to anticipate risk situations, optimize maintenance,
etc. Incorporating sensorization, communications and digital platforms, Big Data and
Artificial Intelligence in grounding revolutionizes the management, maintenance, and global
control of the installation. Continuous and automatic monitoring of the grounding resistance
value allows maintaining adequate safety levels for people and equipment, being able to
identify risk situations that require preventive or corrective maintenance, reducing

42 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD
maintenance costs and possible damages caused by a non-optimized grounding system.
SMART EARTHING MONITOR is an
intelligent grounding monitoring system that measures the status of the grounding systems
(grounding resistance and continuity of the grounding conductor) at regular and
programmable.

43 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

44 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

45 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

46 | P a g e w w w. L i n kv ue syste m. com
 LINK VUE SYSTEM PVT LTD

LINK VUE SYSTEM PRIVATE LIMITED

Add.: Head Office: I-19 Karampura, New Moti Nagar, New Delhi-110015 India.
Tel: +91 11 45597781
Mobile: +91 9811698640 ,+91-9811247237,
E-mail: [email protected]
E-mail: [email protected]
http://www.linkvuesystem.com

47 | P a g e w w w. L i n kv ue syste m. com