The pattern is written in English using US

crochet terminology. Instructions are easy to

follow if you are familiar with basic crochet
techniques.
Materials:
• 2.5 mm and 5.0 mm hook
“Easter Wreath” • Cotton and wool yarn
I used Alize cotton baby “soft” in white (55), light
with bunny and flowers yellow (13), yellow (113), light green (375), green
(274), pink (33).
By Rnata Wreath:
I used wool yarn Mega wool chunky, 100g,
125 m of “ESSENTIALS” in cream (001) and
light blue (010).
• Safety eyes 8.00 mm
• Stuffing
• Yarn needle
• Stitch marker
• Foam 250 mm in diameter (wood or metal
ring)

The crocheted ornaments are approximately 4-

12 cm tall from top to bottom. It may vary
though depending on the kind of yarn and hook
size used.
You can also use any color of yarn.
Feel free to add accessories to your very own
Easter wreath.

Abbreviations:
COPYRIGHT:
• ch – chain
• sc – single crochet
• inc – increase
This is a pattern designed and written by RNata.
• hdc – half double crochet
It’s for personal use only. You may not sell, • dc – double crochet
share (printed or online), reproduce, distribute • tr – treble crochet
and alter any part of it. Do not claim it as your • dec – decrease
own. However, you are welcome to sell the • slst - slip stitch
finished item in a limited number provided that • BLO – use only back loops
you credit me (RNata) as the designer especially • FLO – use only front loops
when listing online. Thank you.

1
 Rnd 19-22: sc around [64], 4 rounds
Rnd 23: 13 sc, 4 dec, 7 sc, 4 dec, 28 sc [56]
Rnd 24: (dec, 5 sc) x8, (fig 2) [48]

“Easter bunny” Rnd 25: (dec, 4 sc) x8 [40]

Start to stuff the head.
HEAD Rnd 26: (dec, 3 sc) x8 [32]
Use white yarn and 2,5 mm hook. Rnd 27: (dec, 2 sc) x8 [24]
Rnd 1: 6 sc in magic ring [6] Rnd 28: (dec, sc) x8 [16]
Rnd 2: (inc) x6 [12] Rnd 29: (dec) x8 [8]
Rnd 3: (inc, sc) x6 [18] Stuff the head and cheeks firmly (fig 5, 6).
Rnd 4: (2 sc, inc) x6 [24] Cut the yarn, leave a tail for closing and
Rnd 5: (inc, 3 sc) x6 [30] sewing.
Rnd 6: 2 sc, (inc, 4 sc) x5, inc, 2 sc [36] How to close the end of the round: with a
Rnd 7: 4 sc, (inc, 5 sc) x5, inc, sc [42] darning needle, insert the remaining yarn
Rnd 8: sc around [42] through all the front loops of the stitches on
Rnd 9: (6 sc, inc) x6 [48] the last round (fig 3). Pull all together at
Rnd 10-12: sc around [48], 3 rounds once and sew to hide the yarn inside the
Rnd 13: (11 sc, inc) x4 [52] part you are working on (fig 4).
Rnd 14-15: sc around [52], 2 rounds
Rnd 16: (12 sc, inc) x4 [56] 3
Attach the safety eyes between rounds 15
and 16 with 10 st between (fig 1).
• skip 13 st (count the sts of round 15) from
the beginning, attach the first eye, then skip
10 st and attach the second eye.

4
1

Rnd 17: sc around [56]

Rnd 18: 13 sc, 4 inc, 7 sc, 4 inc, 28 sc [64]
2
 Use the black thread, embroiser the nose,
5 eyebrows and eyeslash (fig 8, 9, 10).

EARS (make 2)
Use white yarn.
Rnd 1: 6 sc in magic ring [6]
Rnd 2: (sc, inc) x3 [9] 10
Rnd 3: (2 sc, inc) x3 [12]
Rnd 4: sc around [12]
Rnd 5: (3 sc, inc) x3 [15]
Rnd 6: sc around [15]
Rnd 7: (4 sc, inc) x3 [18]
Sew the ears on the top of the head (fig 11,
Rnd 8-14: sc around [18], 7 rounds
12).
Rnd 15: (dec, 4 sc) x3 [15]
Rnd 16-20: sc around [15], 5 rounds 11
Rnd 21: (dec, 3 sc) x3 [12]
Rnd 22-24: sc around [12], 3 rounds
Cut the yarn, leave a tail for sewing (fig 7).
Don’t stuff the ears.

12

3
Add the blush on the cheeks (fig 13).
16
13

17
ARMS (make 2)
Use white yarn.
Rnd 1: 5 sc in magic ring [5]
Rnd 2: (inc) x5 [10]
Rnd 3: (inc, sc) x5 [15]
Rnd 4: (2 sc, inc) x5 [20]
Rnd 5-7: sc around [20], 3 rounds LEGS (make 2)
Use white yarn.
Rnd 8: (dec, 3 sc) x4 [16]
Rnd 1: 6 sc in magic ring [6]
Rnd 9: (dec, 2 sc) x4 [12]
Rnd 2: (inc) x6 [12]
Stuff the arms lightly at the beginning.
Rnd 3: (inc, sc) x6 [18]
Rnd 10-21: sc around [12], 12 rounds
Rnd 4: (2 sc, inc) x6 [24]
Cut the yarn, leave a tail for sewing (fig 14,
Rnd 5: (inc, 3 sc) x6 [30]
15).
Rnd 6-11: sc around [30], 6 rounds
Rnd 12: (dec, 4 sc) x5 [25]
14
Rnd 13: sc around [25]
Rnd 14: (dec, 3 sc) x5 [20]
Rnd 15-21: sc around [20], 7 rounds
Rnd 22: (dec, 2 sc) x5 [15]
Rnd 23: sc around [15]
Rnd 24: (dec, sc) x5 [10]
15 Stuff the legs lightly (fig 18, 19).
Fasten off. Leave a tail for sewing.

18

Use thr black thread, embrider the stripes

as shown on photos 16 and 17.

4
 19 23

Use the black thread, embrider the stripes

as shown on photo 20.

20

Spots (small, make 3): use pink yarn, 8 sc in

magic ring [8]
Fasten off (fig 21).
Spot (big, make 1): use pink yarn, in magic
ring: ch 2, 11 hdc, slst in second chain [12]
Fasten off.

21

22

Sew the spots as shown on photos 22 and

23 using the back ridge loops.

5
 2

“Wreath” The pattern is simple:

Ch 25.
Row 1: cream yarn: start in second chain
STRIPE from hook: hdc* in each back ridge loop,
I used wool yarn Mega wool chunky, 100g, turn [24]
125 m of “ESSENTIALS” in cream (001) and *hdc – special half double crochet:
light blue (010). You should need 1 ball of -yarn over and insert your hook into the next
stitch (fig 3);
each color (fig 1).
-yarn over and pull up a loop (fig 4);
It’s a 100% wool yarn for crochet hook 6.0
-yarn over, and pull the yarn through one loop
mm. I used 5.0 mm crochet hook to make
on the hook (fig 5).
my stripe. -yarn over again, pull the yarn through the three
loops on the hook (fig 6).
1 •see short video in my Instagram page:
https://www.instagram.com/reel/CqDEL8COErm/

3
back ridge loops

I used a foam 250 mm or 9,8 inch in

diameter and 16 mm or 6,3 inch in width. I
found mine in Banier (local flower shop).
You can use a metal or wooden ring (fig 2). 4
It you will use metal ring you should need
the stuffing.
You are going to create a long crocheted
strip that you will then wrap around and
stitch together onto the wreath. The strip
will be 19 cm (7,4 inch) height and 62 cm
(24,4 inch) length.

6
 5 10

Row 3: light blue yarn: ch 2, work in both

loops: 24 hdc*, turn [24]
6 Row 4: light blue yarn: ch 2, work in back
ridge loops: 24 hdc*, turn [24]
• Tip: don’t cut the previously yarn after
changing. Make sure that the loops are
loose enough to stretch when you will sew
the strip around the wreath.
7 After 3 rows, put the stripe around the
form. My stripe past well (fig 11, 12), but if
your stripe is a little bit bigger just add the
stuffing by sewing two sides together.

11

Row 2: cream yarn: ch 2 (don’t cound it as 12

first st), work in back ridge loops: 24 hdc*,
(fig 7, 8)[24]
Change the yarn to light blue.
• Tip: change the color of yarn by doing the
last stitch (fig 9, 10). Change the yarn to cream.
Row 5: cream yarn: ch 2, work in both
9 loops: 24 hdc*, turn [24]
Row 6: cream yarn: ch 2, work in back ridge
loops: 24 hdc*, turn [24]
Change the yarn to light blue.
Row 7: light blue yarn: ch 2, work in both
loops: 24 hdc*, turn [24]
7
Row 8: light blue yarn: ch 2, work in back next two loops and join it with slip stitch (fig
ridge loops: 24 hdc*, turn, (fig 13) [24] 17, 18).
• make a slip stitch loosely.
13
16

Repeat the rows 5-6-7-8 9 times more.

Cut the yarn, leave a long tail for sewing.
Turn the stripe around the foam and make 17
sure that the length is enough for the
closing ( fig 14, 15).
I have made 44 rows, and my stripe is
around 62 cm length.

14
18

Now take your tapestry needle and start

stitching it together. It always looks like it
won’t work out, but keep matching up the
15 beginning of the row to the end of the same
row and it will all come together with no
lumps or bumps at the end (fig 19, 20).
Add the stuffing as you needed it during the
sewing.

19

Now we are going to connect two sides

together. Insert your hook in back loop of
last row and front loop of first row (fig 16),
make a slip stitch. Again, insert your hook in

8
20

21

9
 “Flowers”
“Flowers”

FLOWER (first type, make 3) FLOWER (second type, make 6)

Use white and light green yarn and 2,5 mm hook Use white and light yellow yarn and 2,5 mm
Rnd 1: white yarn: 8 sc in magic ring. hook.
Fasten off (fig 1). Rnd 1: white yarn: 10 sc in magic ring (fig 1).
Rnd 2: attach the light green yarn in any Fasten off.
stitch from previous round: (ch 7, slst in this Rnd 2: attach the light yellow yarn in any
st, slst in next st) x8, (fig 2, 3). stitch from previous round: (ch 2, skip next
Cut the yarn, leave a tail for sewing. st, slst in next st) x5, (fig 2).
• see a short video in my Instagram page: Rnd 3: slst in first space, (ch 4+3 tr+ch 2+3
https://www.instagram.com/reel/CqFq_qLvScY/ tr+ch 4+slst in this space, slst in next chain
space) x5, (fig 3, 4).
1 Cut the yarn, leave a tail for sewing.
• see a short video in my Instagram page:
https://www.instagram.com/reel/CqA1DTiOXm1/

10
3

4 “Flowers”

FLOWER (third type, make 4)

Use white, light yellow, yellow yarn and 2,5 mm
hook.
Rnd 1: white yarn: in magic ring: ch 2, 11
hdc, slst in second chain.
Fasten off.
Rnd 2: attach the light yellow yarn in any
front loop of the previous round: (ch 2, skip
next st, slst in next loop) x6, (fig 1, 2).
Rnd 3: slst in first space, (ch 3+3 dc+ch
3+slst in this space, slst in next chain space)
x6, (fig 3, 4).
Fasten off.
Rnd 4: attach the yellow yarn in any back
loop of the previous round: (ch 3, skip next
st, slst in next loop) x6, (fig 5, 6).
Rnd 5: slst in first space, (ch 4+5 tr+ch 4+slst
in this space, slst in next chain space) x6, (fig
7, 8, 9).
Cut the yarn, leave a tail for sewing.

11
2 8

3 9

12
ASSEMBLING:
Place and sew the arms and legs to stripe, 5
then head (fig 1-8).
•seea short video in my Instagram page:
https://www.instagram.com/p/CqK3sSgMNUs/

7
2

4
Place and sew the flowers on both sides
from the arms (fig 9-12).

13
10

11

12

14