Data sheet 6GK5766-1GE00-7TA0

product type designation

product description IWLAN Access Point
IWLAN Access Point, SCALANCE WAM766-1 EEC, 1 radio, 2.4/5 GHz, 2 N-
Connect connections, iFeatures support via CLP, IEEE 802.11ax (Wi-Fi 6), 1201
Mbps (gross) per radio, 1x10/100/1000 Mbps M12 socket, redundant 24 V DC,
M12 L-coded , PoE, for extended ambient conditions, IP65, -30...+75°C, CLP slot,
DI/DO, A-coded, observe national approvals! CERT ID: MSAX65-W1-M12-E2 FCC
ID: LYHMSAX65V1 operation outside of USA/Israel scope of delivery: sealing caps
for connections

transfer rate
transfer rate
● with WLAN / maximum 1201 Mbit/s
● for Industrial Ethernet 10, 100, 1000 Mbit/s
transfer rate / for Industrial Ethernet
● minimum 10 Mbit/s
● maximum 1000 Mbit/s
interfaces
number of electrical/optical connections / for gigabit Ethernet / 1
maximum
number of electrical connections
● for network components or terminal equipment 1
● for power supply 1
● for redundant voltage supply 1
type of electrical connection
● for network components or terminal equipment M12 interface (8-pole, X-coded), PoE
● for redundant voltage supply M12 interface (4-pin, L-coded)
design of the removable storage
● CLP Yes
● CLP iFeatures Yes
memory
design of the removable storage
● CLP Yes
● CLP iFeatures Yes
interfaces / wireless
number of radio cards / permanently installed 2
transmission mode / for multiple input multiple output (MIMO) 2x2
number of spatial streams 2
number of electrical connections / for external antenna(s) 2
type of electrical connection / for external antenna(s) N-Connect (socket)
product feature / external antenna can be mounted directly on Yes
device
signal inputs/outputs
number of digital inputs 1
number of digital outputs 1
type of electrical connection / at the digital inputs/outputs M12 interface (4-pin, A-coded)
signal range / at digital input -30 V DC 30 V
signal range / at digital output 24 V / 0.5 A DC
operational current / of the signaling contacts / at DC / at 30 V / 0.008 A

6GK57661GE007TA0 Subject to change without notice

8/31/2023
Page 1/4 © Copyright Siemens
 maximum
supply voltage, current consumption, power loss
type of voltage / of the supply voltage Redundant 24 V DC Power Supply, M12, L-coded
supply voltage
● from Power-over-Ethernet according to IEEE802.3at for 48 V
type 1 and IEEE802.3af
consumed current
● at DC / at 24 V 0.55 A
● at DC / at 24 V / sleep mode / maximum 0.013 A
● with Power-over-Ethernet according to IEEE802.3at for 0.27 A
type 1 and IEEE802.3af / typical
power loss [W]
● at DC / at 24 V 13.2 W
● at DC / at 24 V / sleep mode / maximum 0.3 W
● with Power-over-Ethernet according to IEEE802.3at for 12.96 W
type 1 and IEEE802.3af / typical
supply voltage / 1
● from M12 power Connector (L-coded) for redundant 24 V
voltage supply
supply voltage / 1 / rated value 24 V
● type of voltage / 1 / of the supply voltage DC
supply voltage / 2
● from M12 power Connector (L-coded) for redundant 24 V
voltage supply
supply voltage / 2 / rated value 24 V
● type of voltage / 2 / of the supply voltage DC
supply voltage / 3 / rated value 48 V
ambient conditions
ambient temperature
● during operation -30 ... +75 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
relative humidity / at 25 °C / without condensation / during 90 %
operation / maximum
protection class IP IP65
design, dimensions and weights
width 150 mm
height 179.5 mm
depth 45 mm
width / of the enclosure / without antenna 150 mm
height / of the enclosure / without antenna 179.5 mm
depth / of the enclosure / without antenna 45 mm
net weight 1.1 kg
product feature / conformal coating Yes
fastening method wall mounting and assembly on VESA support 75 x 75 mm, mounting on DIN
rail with separate mounting adapter.
● 35 mm top hat DIN rail mounting Yes
● wall mounting Yes
● VESA mounting Yes
radio frequencies
operating frequency
● for WLAN in 2.4 GHz frequency band 2.41 ... 2.48 GHz; depending on the country approvals
● for WLAN in 5 GHz frequency band 4.9 ... 5.8 GHz; depending on the country approvals
product features, product functions, product components / general
product function / Access Point Mode Yes
product function / client Mode Yes
number of SSIDs 8
product function
● iPCF Access Point No
● iPCF-2 access point Yes; iPCF-2 is not compatible with iPCF. See documentation for function
description.
● iPCF client No
● iPCF-2 client Yes; iPCF-2 is not compatible with iPCF. See documentation for function

6GK57661GE007TA0 Subject to change without notice

8/31/2023
Page 2/4 © Copyright Siemens
 description.
product function / iPRP Yes
product functions / management, configuration, engineering
number of manageable IP addresses / in client 2
product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
● configuration with STEP 7 Yes
● configuration with STEP 7 in the TIA Portal Yes
● WDS No
protocol / is supported
● Address Resolution Protocol (ARP) Yes
● ICMP Yes
● Telnet Yes
● HTTP Yes
● HTTPS Yes
● TFTP Yes
● DCP Yes
● LLDP Yes
identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 - higher level designation/location designation Yes
product functions / diagnostics
product function
● PROFINET IO diagnosis Yes
● SysLog Yes
protocol / is supported
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
product functions / VLAN
product function
● function VLAN with IWLAN Yes
number of VLANs / maximum 24
product functions / DHCP
product function
● DHCP client Yes
product functions / redundancy
protocol / is supported
● STP/RSTP Yes
● MSTP Yes
● RSTP Yes
product function
● redundancy procedure MSTP Yes
product functions / security
product function
● management security, ACL-IP based No
● IEEE 802.1x (radius) Yes
● NAT/NAPT Yes
● access protection according to IEEE802.11i Yes
● WPA/WPA2 Yes
● WPA3 Yes
● TKIP/AES Yes
● RADIUS client Yes
protocol / is supported
● SSH Yes
key length
● with SSL 4096 bit

6GK57661GE007TA0 Subject to change without notice

8/31/2023
Page 3/4 © Copyright Siemens
product functions / time
protocol / is supported
● NTP Yes
● SNTP Yes
● SIMATIC time synchronization (SIMATIC Time) Yes
standards, specifications, approvals
certificate of suitability
● EC Declaration of Conformity Yes
● CE marking Yes
● E1 approval Yes
● railway application in accordance with EN 50155 Yes
● railway application in accordance with EN 50121-4 Yes
● fire protection in accordance with EN 45545-2 Yes
● Power-over-Ethernet according IEEE802.3at for type 1 Yes
and IEEE802.3af
standard for wireless communication
● IEEE 802.11a Yes
● IEEE 802.11b Yes
● IEEE 802.11e Yes
● IEEE 802.11g Yes
● IEEE 802.11h Yes
● IEEE 802.11i Yes
● IEEE 802.11n Yes
● IEEE 802.11ac Yes
● IEEE 802.11ax Yes
● IEEE 802.11r Yes
wireless approval You will find the current list of countries at: www.siemens.com/wireless-
approvals or directly on the device
MTBF 24 a

● reference temperature 40 °C
standards, specifications, approvals / hazardous environments
standard / for hazardous zone EN IEC 60079-0 : 2018, EN60079-7:2015 + A1 : 2018; II 3 G Ex ec IIC T4 Gc
● from CSA and UL UL121201, CAN/CSA C22.2 No.213, Cl. 1, div. 2, GP. A, B, C, D, T4 / Cl. 1,
Zone 2, GP IIC T4, UL File E240480
further information / internet links
internet link
● to website: TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to web page: selection aid TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to the website: IWLAN http://www.siemens.com/iwlan
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/industry/infocenter
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx-Download-Manager http://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
security information
security information Siemens provides products and solutions with industrial security functions that
support the secure operation of plants, solutions, machines, equipment and/or
networks. They are important components in a holistic industrial security
concept. With this in mind, Siemens’ products and solutions undergo
continuous development. Siemens recommends strongly that you regularly
check for product updates. For the secure operation of Siemens products and
solutions, it is necessary to take suitable preventive action(e.g. cell protection
concept) and integrate each component into a holistic, state-of-the-art industrial
security concept. Third-party products that may be in use should also be
considered. For more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about product
updates as they occur, sign up for a product-specific newsletter. For more
information, visit http://support.automation.siemens.com. (V3.4)

last modified: 8/25/2023

6GK57661GE007TA0 Subject to change without notice

8/31/2023
Page 4/4 © Copyright Siemens